Sophos Endpoint Security and Control Guide
Annonce
Annonce
Sophos Endpoint Security and Control
Managed Service Provider guide for a distributed system
Product version:
Document date:
10
April 2016
2
Contents
3
4
Sophos Endpoint Security and Control
1 About this guide
This guide is for managed service providers (MSPs) who offer managed Sophos Endpoint Security and Control to customers. It describes how to set up Sophos Endpoint Security and Control
(SESC) in such a way that you can manage it remotely on behalf of a customer (as well as protecting your own computers) in a distributed system.
Note: If you want to use a single server instead of a distributed system, see the Sophos Endpoint
Security and Control Managed Service Provider guide for a single server instead of this guide.
It assumes that you are familiar with and already using a remote monitoring and management system (RMM) such as Kaseya, N-able, LevelPlatforms or Zenith to provide remote software installation, management and monitoring services to your customer end-users.
Use this document in partnership with your assigned Sophos Sales Engineer. If you do not have a Sales Engineer, contact your Sophos Account Manager.
Sophos documentation is published at http://www.sophos.com/en-us/support/documentation.aspx
.
Additional information and guidance can be found in the MSP forum within the SophosTalk community available at: http://community.sophos.com/t5/Sophos-Managed-Service-Provider/bd-p/SophosMSP .
Managed Service Provider guide for a distributed system
2 About Sophos software
This section describes the Sophos products required for managed endpoint security:
■
Sophos Enterprise Console
■
■
Sophos Update Manager
Sophos Endpoint Security and Control
2.1 Sophos Enterprise Console
Sophos Enterprise Console is an administration tool that deploys and manages Sophos endpoint software using groups and policies. It also provides alerts and detailed reports about endpoint status and detected threats.
Enterprise Console includes and manages Sophos Update Manager.
2.1.1 Reporting Interface and Log Writer
Sophos Reporting Interface and Sophos Reporting Log Writer are additional tools you can use with Enterprise Console. They enable you to use third-party reporting and log-monitoring software to generate reports from threat and event data in Enterprise Console. For more information, see:
■
■
■
Sophos Reporting Interface documentation page
Sophos Reporting Log Writer documentation page
Knowledgebase article 112873
2.2 Sophos Update Manager
Sophos Update Manager downloads software and updates from Sophos automatically to a central location. It makes these updates available in shared update folders. Endpoint computers update themselves from these shares.
Sophos Update Manager is installed as part of Sophos Enterprise Console but can also be installed separately. A managed endpoint security installation requires two copies of Update Manager,
parent and child. The parent Update Manager gets updates from Sophos over the internet. The child Update Manager gets updates from the parent Update Manager.
Customers' computers get updates from the child Update Manager. If you are protecting your own LAN computers with Sophos security, these get updates from the parent Update Manager.
5
6
Sophos Endpoint Security and Control
2.3 Sophos Endpoint Security and Control
Sophos Endpoint Security and Control (SESC) refers both to the entire suite of Sophos security software as described in this section, and also the agent which runs on endpoint computers, protecting them and interacting with the administration tools.
Endpoint Security and Control (for endpoints) includes these components:
■
Sophos AutoUpdate. This updates itself and the other components from an Update Manager.
■
■
■
Sophos Remote Management System (RMS). This handles communications with Sophos
Enterprise Console over TCP on ports 8192 and 8194.
Sophos Anti-Virus. This includes anti-virus, HIPS, data control, and device control features.
Web protection (optional) provides enhanced protection against web threats. It includes the following features:
■
Live URL filtering, which blocks access to websites that are known to host malware. This feature works by performing a real-time lookup against Sophos’s online database of infected websites.
■
Content scanning, which scans data and files downloaded from the internet (or intranet) and proactively detects malicious content.This feature scans content hosted at any locations, including those not listed in the database of infected websites.
■
With Website control (optional), you can filter the web activity of users, based on the 14 website categories: Adult Sexually Explicit, Alcohol and Tobacco, Anonymizer Proxies,
Criminal Activity, Gambling, Hacking, Illegal Drugs, Intolerance and Hate, Phishing and
Fraud, Spam URLs, Spyware, Tasteless and Offensive, Violence, and Weapons.
■
■
Sophos Client Firewall (optional). This enables only named applications, or classes of applications, to access a network or the internet.
Sophos Patch (optional). Enterprise Console enables you to check that the endpoint computers have the most up-to-date security patches installed. SophosLabs provides ratings that help you determine the most critical security patch issues so that you can resolve them quickly.
SophosLabs ratings take the latest exploits into account and therefore may differ from a vendor's severity level.
Managed Service Provider guide for a distributed system
3 How does SESC work for MSPs?
Managed Sophos Endpoint Security and Control works as follows:
You, the Managed Service Provider (MSP) provide managed IT services to remote customers over the internet.
Sophos Enterprise Console (SEC) runs on a server you host (the SEC Server). It allows you to manage computer groups and security policies, and displays detailed endpoint status and alerts.
Sophos Update Manager (SUM parent) runs on the SEC server. It publishes software installation files and updates from Sophos on your host to shared folders on your LAN.
Sophos Update Manager (SUM child) runs on a web server in your DMZ (the Sophos DMZ
Server). It gets and publishes software installation files and updates from the SUM parent to shared folders in your DMZ.
Note: The Sophos DMZ Server also needs to run the Microsoft IIS (Internet Information Services) web server so that it can publish the shared Sophos update folders to the internet using HTTP.
Sophos Endpoint Security and Control (SESC) runs on the SEC Server, the Sophos DMZ
Server and the customer's endpoint computers, protecting them from threats and sending reports back to Enterprise Console.
SESC includes Sophos AutoUpdate (SAU) which gets its updates from the shared folders maintained by SUM installed on the SEC Server over HTTP (using IIS).
Remote Management System (RMS) runs on all computers (including the SEC Server and clients) to provide the bidirectional communication mechanism for policies, client status, and alerts.
The Remote Monitoring and Management system (RMM) (for example Kaseya) consists of a console at the MSP, together with agents installed on each managed endpoint.
The RMM system:
■ deploys a custom Endpoint Security and Control installer package on each endpoint,
■
■ runs the package, installing Endpoint Security and Control on each endpoint, regularly runs a script on each endpoint which queries Endpoint Security and Control, enabling the RMM console to display basic status and alerts,
■ manages other third-party endpoint software in a similar way.
There are many RMM products from various vendors for different situations and applications.
The configuration and methods of communication between RMM components are proprietary and beyond the scope of this guide.
7
Sophos Endpoint Security and Control
8
Note: Other computers within the MSP's LAN may also optionally be protected as described in
Protect your SEC Server (page 14); for clarity, this is not shown. Likewise, RMM network
communications will vary according to the system used and are not shown.
Note: Starting with version 5.4.0, Sophos Enterprise Console (including the remote management console component) is no longer supported on Windows Server 2003, Windows Server 2003 R2,
Windows XP, and Windows Vista.
Managed Service Provider guide for a distributed system
4 How does your SEC Server manage its clients
This section explains how to configure the various network components to enable communications between the SEC Server, the Sophos DMZ Server and the customers' managed endpoints.
The diagram below shows how the various servers, domains, ports, internal and external IP addresses interact. The IP addresses shown are examples and should be replaced with actual
IP addresses.
The Sophos DMZ Server is addressed both internally and externally by the same domain name, sophos-dmz.msp.com.The internal and external DNS servers however map sophos-dmz.msp.com
to different IP addresses, as shown above.
We assume that the virtual directory website uses port 80 for inbound connections. All ports shown in the above example are TCP ports.
In the example shown, the edge device has an IP address 1.1.1.1, which is the external interface of the firewall. Ports 80, 8192, and 8194 are translated with NAT through this interface.
9
Sophos Endpoint Security and Control
If you plan to use Sophos Patch, you must configure the reverse proxy on the edge device so it redirects the traffic that matches the address http://<1.1.1.1>/Sophos/Management/Patch/EndpointCommunicator/ directly to the SEC Server.
We recommend you use a transparent caching proxy on the customer's location to reduce traffic used by patch and endpoint updates.
Note: Alternative ports can be used if necessary, for example if another application is already using port 80. When configuring client updating, the location should be specified in the standard manner. For example, if port 8085 is to be used, the update location should be http://sophos-dmz.msp.com:8085/sophos.
4.1 Network requirements
All machines, including the SEC server, should be able to resolve the fully qualified domain name
(FQDN) appropriately. If your server is using a private IP (RFC 1918) and is publically reached using NAT, this would mean that sophos-dmz.msp.com would resolve to the Sophos DMZ Server's internal IP address (e.g. 192.168.0.2). For remote machines, the FQDN would resolve to your
Sophos DMZ Server's external IP address (e.g 1.1.1.1).
1. Create a DNS A record called sophos-dmz.msp.com for BOTH internal and external DNS systems as follows: a) Create an internal address record that resolves to the internal IP address of the Sophos
DMZ Server (e.g. 192.168.0.11).
b) Create an external (Internet) DNS A record that resolves to the public interface of the
Sophos DMZ Server (e.g. 1.1.1.1).
2. Configure the Sophos DMZ Server Internet firewall to port-forward (with NAT) ports TCP 8192 and 8194.
10
Managed Service Provider guide for a distributed system
5 What are the key steps?
The key steps are as follows:
■
Install Sophos Enterprise Console on a server you host (your SEC Server). This includes the parent Sophos Update Manager.
■
■
■
■
■
■
■
■
■
■
■
Connect to Sophos and download the security software you need.
Protect the SEC Server with Sophos security software.
Set up your DMZ by modifying the configuration file, installing a child Update Manager, and editing registry values.
Publish shared folder from which customers' computers can update.
Configure your SEC Server by creating groups for each customer and editing the updating policy.
Verify your configuration
Protect the Sophos DMZ Server with Sophos security software.
Create an installer package.
Verify your installation package.
Distribute the installer package to the customer's computers (using the RMM system).
Manage the endpoint security software.
11
Sophos Endpoint Security and Control
12
6 Installing Enterprise Console on your SEC server
The following instructions explain how to install Sophos Enterprise Console on your SEC Server.
6.1 Prepare to install Enterprise Console
On the server that meets the system requirements for a SEC Server (see knowledgebase article
118635 ), you must:
1. Ensure it is connected to the internet.
2. Ensure you have access to the Windows operating system installation and Service Pack CDs.
You may be prompted for them during installation.
3. If the SEC Server has Microsoft SQL Server version earlier than 2005 SP4, upgrade it. If not,
SQL Server Express is included with Enterprise Console (SQL Server 2012 Express SP2 is included with Enterprise Console 5.4.0).
4. If the server is running Windows Server 2008 or later, turn off User Account Control (UAC) and restart the server.
You can turn UAC on again after you have completed the installation and downloaded your security software.
6.2 Install Enterprise Console
To install Enterprise Console:
1. Log on as an administrator: a) If the computer is in a domain, log on as a domain administrator.
b) If the computer is in a workgroup, log on as a local administrator.
2. Go to the download web page that is specified in your registration/download e-mail.
3. Download the Enterprise Console installer package.
4. Double-click the downloaded package.
5. In the Sophos Enterprise Console dialog box, click Next. A wizard guides you through installation. You should do as follows: a) Accept the defaults wherever possible.
b) In the Components selection dialog box, select all three components: Management
Server, Management Console, and Database.
6. When installation is complete, you may be prompted to restart. Click Yes or Finish.
For more information on installation and setting up policies, see the Sophos Enterprise Console
Quick Startup Guide and Sophos Enterprise Console Policy Setup Guide.
Managed Service Provider guide for a distributed system
7 Download security software from Sophos
When you log back on (or restart) for the first time after installation, Enterprise Console opens automatically and runs a wizard to select and download endpoint security software.
If you used Remote Desktop to install Enterprise Console, the console does not open automatically; open it from the Start menu.
As the wizard runs:
1. On the Sophos Download Account Details page, enter your Sophos license schedule user name and password. If you access the Internet via a proxy server, select the Access Sophos
via a proxy server checkbox and enter your proxy settings.
2. On the Platform selection page, select only the platforms you need to protect now.
When you click Next, Enterprise Console begins downloading your software.
Note: You can add other platforms later by modifying your software subscription in Update
Manager view.
3. On the Downloading Software page, downloading progress is displayed. Click Next at any time.
4. On the Import computers from Active Directory page, if you wish to protect your own computers on your LAN with Sophos security software and have the appropriate license, you may select Set up groups for your computers.
This creates a shared installation folder on your SEC Server, which contains installable versions of Sophos endpoint software for each operating system you choose to protect. It is shared as
\\<SEC-Server>\SophosUpdate\CIDs
. The share root is located at the following location:
Windows
Server
Default location
2003 C:\Documents and Settings\All Users\Application Data\Sophos\Update Manager\Update
Manager\CIDs\
2008, 2008
R2, 2012,
2012 R2, 2016
C:\ProgramData\Sophos\Update Manager\Update Manager\CIDs\
The installation and update files for Sophos Endpoint Security and Control for Windows are located in the subdirectory
\S000\SAVSCFXP\
.
Note: You can view the CID path for each platform from Enterprise Console: On the View menu, click Bootstrap Locations.
If you turned off User Account Control before installation, you can now turn it on again.
13
Sophos Endpoint Security and Control
8 Protect your SEC Server
As a test, we recommend you protect your SEC server.
1. Install Endpoint Security and Control. To do this, from the computer to be protected, run setup from the CID path listed above at the end of
Download security software from Sophos (page
13).
2. Confirm the installation is successful.
To verify this, open Enterprise Console. In the Status tab, the Up to date column displays yes.
For more information on installing Endpoint Security and Control, see the Endpoint Security and
Control upgrade guide.
14
Managed Service Provider guide for a distributed system
9 Setting up your Sophos DMZ Server
To set up your Sophos DMZ Server, you must do the following:
1. Modify the configuration file in the SEC Server so it can communicate with the Sophos DMZ
Server.
2. Install Update Manager on the Sophos DMZ Server.
3. Edit registry values in the Sophos DMZ Server so it can communicate with the SEC Server and client computers.
9.1 Modify the configuration file
In the SEC Server:
1. Browse to the SUMInstaller folder.
Windows version
32-bit
64-bit
Default location
C:\Program Files\Sophos\Enterprise Console\SUMInstaller
C:\Program Files (x86)\Sophos\Enterprise Console\SUMInstaller
2. Locate the file MRinit.conf and edit the values for MRParentAddress and
ParentRouterAddress.
The MRParentAddress is used by the Sophos DMZ Server to connect to the SEC Server, and the ParentRouterAddress is used by the client computers to connect to the Sophos DMZ
Server.
Default value example:
"MRParentAddress"="sophos-console.abc.sophos,sophos-console"
"ParentRouterAddress"="sophos-console.abc.sophos,sophos-console"
Modified content example:
Include an externally accessible IP address and the local NetBIOS name for the SEC Server and the Sophos DMZ Server.
"MRParentAddress"="192.168.0.10, sophos-console.msp.com, sophos-console"
"ParentRouterAddress"="sophos-dmz,sophos-dmz.msp.com"
Save the file and close it. For an example of the modified MRinit.conf file, see Appendix:
(page 37).
15
Sophos Endpoint Security and Control
9.2 Installing Update Manager
This section explains how to install a child Update Manager on a server in your DMZ (your Sophos
DMZ Server) and configure it to fetch updates from the parent Update Manager on your SEC
Server.
9.2.1 Prepare for Update Manager installation
Go to your Sophos DMZ Server.
■
Ensure that the following ports accept incoming and outgoing traffic to the LAN network: 137,
138, 139, and 445.
■
■
If the server is running a version of Windows that includes the Network Discovery feature, and the feature is turned off, turn it on and restart the server.
Check that the Sophos DMZ Server can copy files from the SEC Server using the shared location, such as \\<sophos-dmz.msp.com>\SophosUpdate\.
Note:
■
■
The above instructions assume that you are using UNC networking between the SEC
Server and Sophos DMZ Server. For other networking protocols such as HTTP, see your
Sophos Sales Engineer.
If the server is running Windows Server 2008, turn off User Account Control (UAC) and restart the server. You can turn UAC on again after you have installed the update manager and subscribed to Sophos updates.
9.2.2 Install Update Manager
1. Log on to your Sophos DMZ Server as an administrator.
a) If the server is in a domain, log on as a domain administrator.
b) If the server is in a workgroup, log on as a local administrator.
2. Find the
SUMInstallSet
shared folder on your SEC Server.
Example: \\<sophos-console.msp.com>\SUMInstallSet
3. Double-click
Setup.exe
to run the installer.
4. In the Sophos Update Manager dialog box, click Next.
A wizard guides you through installation. Accept the default options.
On the Sophos DMZ Server you have now:
■
Installed an Update Manager that is managed by Enterprise Console.
■
Created a shared installation folder
\\<sophos-dmz.msp.com>\SophosUpdate\
The installation files on the shared installation folder are used to install Sophos Endpoint Security and Control on the Sophos DMZ Server, and as a source for creating an installation package.
16
Managed Service Provider guide for a distributed system
Go to the Sophos Enterprise Console on the SEC Server and make sure the new Update Manager has appeared under "Update Managers". Subscribe the new Sophos Update Manager to the
"recommended" package and set its source as the SEC Server. It may then take up to 15 minutes for the package to be downloaded to the Sophos DMZ Server.
For information on changing update policy and Update Manager passwords, see knowledgebase article 65318 .
9.3 Edit registry values
In the Sophos DMZ Server:
1. Open the Registry Editor. To open click Start, Run, type
regedit
and then click OK.
2. Take a back up of the registry.
For information on how to take a registry back up, refer to Microsoft documentation.
3. In the Registry Editor window, modify the following two registry values:
■
Sophos Message Router
■
Router
To do this: a) Navigate to the Sophos Message Router registry key:
Windows version
32-bit or
64-bit
Default location
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Sophos Message
Router\ b) In the right pane, select the entry ImagePath.
c) On the Edit menu, click Modify.
d) In Value data edit the value as follows:
■
For 32-bit computers:
Default value:
"C:\Program Files\Sophos\Remote Management System\RouterNT.exe" -service -name
Router -ORBListenEndpoints iiop://:8193/ssl_port=8194
Modify value:
Modify the value to include the additional text and your externally resolvable fully qualified
domain name as indicated in bold.
"C:\Program Files\Sophos\Remote Management System\RouterNT.exe" -service -name
Router -ORBDottedDecimalAddresses 0 -ORBListenEndpoints iiop://:8193/ssl_port=8194&hostname_in_ior=sophos-dmz.msp.com
17
Sophos Endpoint Security and Control
■
For 64-bit computers:
Default value:
"C:\Program Files (x86)\Sophos\Remote Management System\RouterNT.exe" -service
-name Router -ORBListenEndpoints iiop://:8193/ssl_port=8194
Modify value:
Modify the value to include the additional text and your externally resolvable fully qualified
domain name as indicated in bold.
"C:\Program Files (x86)\Sophos\Remote Management System\RouterNT.exe" -service
-name Router -ORBDottedDecimalAddresses 0 -ORBListenEndpoints iiop://:8193/ssl_port=8194&hostname_in_ior=sophos-dmz.msp.com e) Navigate to the Router registry key:
Windows version
32-bit
64-bit
Default location
HKEY_LOCAL_MACHINE\SOFTWARE\Sophos\Messaging System\Router\
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Sophos\Messaging
System\Router\ f) In the right pane, select the entry ServiceArgs.
g) On the Edit menu, click Modify.
h) In Value data edit the value as follows:
Default value:
-ORBListenEndpoints iiop://:8193/ssl_port=8194
Modify to:
Modify the value to include the additional text and your externally resolvable fully qualified
domain name as indicated in bold.
-ORBDottedDecimalAddresses 0 -ORBListenEndpoints iiop://:8193/ssl_port=8194&hostname_in_ior=sophos-dmz.msp.com
4. Restart the Sophos Message Router service.
The following knowledgebase articles provide more information on this process:
■
Knowledgebase article 50832 (Typically, scenario 2 is the most common)
■
Knowledgebase article 14635
18
Managed Service Provider guide for a distributed system
10 Publish customer update folders
When you install the Update Manager a shared 'SophosUpdate' folder is automatically created at the following location on the Sophos DMZ Server
\\<sophos-dmz.msp.com>\SophosUpdate
.
This shared folder must be accessible by http so customers' computers can update from it.
1. Go to the SEC Server and open Enterprise Console.
2. In Enterprise Console, select the Update Managers view. Find and right-click the child Sophos
Update Manager on your Sophos DMZ Server.
3. From View/Edit configuration select Subscriptions and ensure that the recommended package is subscribed to
\\<sophos-dmz.msp.com>\SophosUpdate
The SEC Server will communicate with the Sophos DMZ Server and build a new shared folder in
SophosUpdate
. This may take up to 15 minutes.
4. On the Sophos DMZ Server create an account, sophosupd with a complex password and read-only access to
SophosUpdate
.
5. Install and configure Microsoft IIS on the Sophos DMZ Server and secure it appropriately.
6. In IIS, create a virtual directory called
SophosUpdate
, which shares
\\<sophos-dmz.msp.com>\SophosUpdate
, assigning the new account sophosupd rights.
If you use a localpath instead of a UNC, the default path to the CID is:
Windows
Server
Default location
2003 C:\Documents and Settings\All Users\Application Data\Sophos\Update Manager\Update
Manager\
2008, 2008
R2, 2012,
2012 R2,
2016
C:\ProgramData\Sophos\Update Manager\Update Manager\
7. Configure MIME types. For testing purposes, you can add .* as a MIME type.
For more information on how to create a Web CID and configure MIME types, see knowledgebase article 38238 .
Note: HTTPS is not supported for client updating. We recommend that you use NTLM (Integrated
Windows authentication) or Digest authentication to ensure credentials are secure. These settings can be configured in IIS, and the clients will automatically use the most secure option available to them.
19
Sophos Endpoint Security and Control
20
11 Configuring your SEC Server to manage customers
After you download the security software you must configure your SEC Server to manage the customers and their computers.
11.1 Create groups
You organise computers by creating groups in Sophos Enterprise Console. We recommend you create at least one group for yourself, the MSP, and at least one group for each customer. If your customers have systems that require distinct policies, sub groups can be created inside customer groups, for example "Servers" and "Desktops". Each group may be set to comply with a distinct set of policies, although in practice many groups will likely use the same policies. Dividing managed endpoints into groups like this enables you to change a particular security policy for one customer without affecting other customers', or your own endpoints.
To create a new group for computers:
1. In the Endpoints view, in the Groups pane (on the left-hand side of the console), select where you want to create the group.
Click the computer name at the top if you want to create a new top-level group. Click an existing group if you want to create a subgroup.
2. On the toolbar, click the Create group icon.
A “New Group” is added to the list, with its name highlighted.
3. Type a name for the group.
Policies are applied to the new group automatically. You can edit these policies, or apply different policies.
If the new group is a subgroup, it initially uses the same settings as the group it is within.
For your own computers, you can import groups from Microsoft Active Directory.
For more information on setting up groups, see the Enterprise Console Help and knowledgebase article 63155 .
11.2 Create updating policy
You must create a new updating policy and configure it to use the HTTP address you set up in
IIS earlier ( Publish customer update folders (page 19)).
To create a new updating policy:
1. In the Policies pane, right-click on Updating and select Create Policy.
Enter a policy name.
Managed Service Provider guide for a distributed system
2. Double-click the policy name. In the Updating Policy dialog box, on the Primary Server tab, enter the address and credentials that will be used to access the server. The Address should be a fully qualified domain name or IP address (e.g. http://sophos-dmz.msp.com/SophosUpdate or http://1.1.1.1/SophosUpdate)
For Username and Password, enter the account credentials that will be used by clients to download updates. We recommend using a unique account per customer and having read-only permission.
Change other details, if appropriate and click OK to close the Updating Policy dialog box.
3. In the Groups pane, select a group to use the updating policy you configured by dragging the policy onto the group, or right-click the group, click on View/Edit Group Policy Details and then select the new policy from the drop-down list for Updating.
Repeat this step for each group that you want the updating policy to be applied.
21
Sophos Endpoint Security and Control
12 Verify your configuration
Your configuration is now complete. To verify if the settings are appropriate, we recommend that you perform the below tests:
1. From the Sophos DMZ Server, ensure you can connect to port 8192 using the fully qualified domain name (FQDN) of the Sophos DMZ server itself.
You should receive a response that starts with "IOR". You can do this using a tool such as
Telnet. For example, in the command prompt window, type
telnet sophos-dmz.msp.com
8192
.
If it does not work, then try using “localhost” in place of the FQDN to determine if it is a DNS/IP routing issue.
Repeat the same step for the SEC Server. For example, using Telnet, in the command prompt window type:
telnet sec-server 8192
.
2. From an external client, repeat the above step to verify if the DMZ server is externally accessible. Example: Type
telnet sophos-dmz.msp.com 8192
.
3. Verify if the management system is configured with the FQDN. To do this: a) On your Sophos DMZ Server, open the Registry Editor.
To open click Start, Run, type
regedit
and then click OK.
b) Navigate to the registry key
HKEY_LOCAL_MACHINE\SOFTWARE
.
c) Right-click
SOFTWARE
and click Find.
d) In Find what enter the FQDN of the Sophos DMZ Server.
e) After you find an instance, press F3 on your keyboard to search again to find another instance.
Note: You should have two instances of the FQDN name.
Once you ensure you have two instances, close the Registry Editor window.
4. From an external client, check if you can connect to IIS on port 80 using the Sophos DMZ
Server's FQDN through a web browser. Navigate through the folder structure (or if directory listing is disabled, then specify paths derived from browsing the local directory) to ensure you can download files.
For example, download a .pem file as it is not in the default list of IIS MIME types. With default initial settings, the path to download .pem file will be: http://<sophos-dmz.msp.com>/SophosUpdate/CIDs/s000/SAVSCFXP/cac.pem
After you verify the above steps, you can continue to protect your Sophos DMZ Server.
22
Managed Service Provider guide for a distributed system
13 Protect your Sophos DMZ Server
Now you protect the Sophos DMZ Server on which you have just installed Sophos Update Manager.
1. From the Sophos DMZ Server, run the setup file from the installation share path on the DMZ
Server listed above in
Install Update Manager (page 16).
2. From Enterprise Console a) Make the Sophos DMZ Server a member of an MSP group.
b) Make the Sophos DMZ Server compliant with a set of policies.
c) Check that the Sophos DMZ Server has no alerts or error conditions, dealing with any that need attention, such as needing a restart.
Your Sophos DMZ Server is now protected.
23
Sophos Endpoint Security and Control
24
14 Creating an installation package
14.1 About the Deployment Packager tool
You can install Sophos Endpoint Security and Control (SESC) on client endpoints by using the
Deployment Packager tool, available on the Sophos website. The Deployment Packager creates a single self-extracting archive file from a set of Sophos endpoint setup files, for installing Endpoint
Security and Control on Windows endpoints. The packaged file includes configuration options such as silent/interactive installation, installation package choices and setup parameters, update path/credentials and endpoint group membership.
Packages created with the Deployment Packager always attempt to remove other potentially-clashing protection software when installed.
It may be necessary for you to produce several packages, each meeting the requirements of different endpoint types.
You can run the Deployment Packager tool through either its graphical user interface (GUI) or command-line interface (CLI).
■
■
The GUI is easier for one-off deployments.
The CLI is more versatile for repeated deployments.
A string to invoke the command line version with options can be stored in a text file, or regularly run from a scheduled batch file, ensuring that the installation packages are always up-to-date.
So, if you are managing large numbers of computers where there is a need for frequent installation on endpoints, then the CLI is preferable.
Instructions for using the Deployment Packager via the command line can be found in Appendix:
Create a protection package using the CLI
(page 35).
System requirements
The minimum requirements to run the Deployment Packager tool are as follows:
■
Windows operating systems: see knowledgebase article 118635
■
■
Disk space: 1 GB
Memory: 1 GB
■
Processor: 2 GHz Pentium or equivalent
You should also be aware of system requirements for the packaged endpoint components. See knowledgebase article 118620 .
14.2 Create a protection package using the GUI
Use the graphical user interface for one-off deployment.
Managed Service Provider guide for a distributed system
To create an endpoint protection package with anti-virus, Remote Management, Firewall, and patch management, do as follows.
1. Run
DeploymentPackager.exe
.
The Sophos Deployment Packager dialog box is displayed.
2. In Source folder, specify the location of the central installation directory containing the endpoint software installation files. This may be a UNC path or a local folder.
3. Under Package Endpoint Protection components, select from the following:
■
Remote Management System (RMS)
This installs and enables the Sophos Remote Management System, which allows Enterprise
Console to control Endpoint Security and Control. For Managed systems you must enable this component.
Note: When you select this option, endpoints obtain their updating path and credentials from Enterprise Console through RMS.
■
Firewall
This installs the Sophos Client Firewall.
Note: If you want to install this option, check endpoint system requirements in knowledgebase article 118620 .
25
Sophos Endpoint Security and Control
■
Patch
Note: Port 80 is the default port used for client updating and Patch. You must be able to direct the traffic by either:
■ using a separate FQDN or IP address, or
■ routing based on the requested URL.
This installs Sophos Patch Agent. If you select this option, for the Management server
URL enter the reverse proxy address through which the endpoints can communicate with the SEC Server. The address must be an IP address or a fully qualified domain name.
Example: http://1.1.1.1.
You must configure the reverse proxy so it redirects the traffic that matches the address http://1.1.1.1/Sophos/Management/Patch/EndpointCommunicator/ to the SEC Server directly.
■
In Include selected components do one of the following:
To include the selected components in the deployment package, click In the package. If you use this option with Patch, you can choose the Operating system type.
To download selected components from the update source, click Configure AutoUpdate
to download components.
If you select Remote Management System (RMS) and then click In the package in Include
selected components, all updating details are obtained from Enterprise Console.
Note: The endpoint installer is unable to use a proxy server. If the update location is accessed through a proxy server, then the required endpoint components must be included in the package.
4. Select the Operating system type to package. This option is only applicable if Patch is being installed from the deployment package. If you choose either 32-bit or 64-bit, the package can be installed only on specific 32-bit or 64-bit operating systems. If you choose 32-bit and 64-bit, the package can be installed on both 32 and 64-bit operating systems, but the package size will be large.
5. In Installation type, select how the installation program will run on endpoint computers.
■
■
■
Select Silent: the program runs without any user interaction. The installation progress is not displayed on the endpoint computer.
Select Non-interactive: the program runs without any user interaction. The installation progress is displayed on the endpoint computer.
Select Interactive: the program runs with user interaction. The user can control the installation.
6. In Additional setup parameters, specify endpoint setup installation options. Always specify group membership using the -g option so that each installer is specific to and sets up endpoints to be members of existing groups.
The packager does not check these options for errors.
For further information, see knowledgebase article 12570 .
26
Managed Service Provider guide for a distributed system
7. In Output package, specify the destination path for the output installer package. You can also specify an optional filename; if this is not supplied, the Deployment Packager will use a default filename.
8. In the Updating panel, for indirectly-managed endpoint packages or where remote management is enabled but not included in the package, enter the update path and credentials. You may set ":<port number>" after an HTTP URL; if unset, this defaults to 80.
Note:
■
Ensure all the components that are selected can be updated from the update location you specify (for example, Patch). If a different location is used for components, you can configure it as a secondary update location.
■
■
Credentials are obfuscated in the package; however, accounts set up for endpoints to read update server locations should always be as restrictive as possible, allowing only read-only access.
Endpoints will attempt to use their system proxy settings only if set using the environmental variables http_proxy or all_proxy. Proxy settings in Windows Control Panel Internet Options or Internet Explorer are ignored. _proxy variable values take the format
_proxy=[protocol://][user:password@]host[:port], for example http_proxy=http://user:password@proxy:8080
9. Click Build Package to build the self-extracting archive.
27
Sophos Endpoint Security and Control
15 Verify your installation package
After the installation package has been created, we recommend you verify if you are able to install, update, and manage computers using the package that has been created.
To do this:
1. Identify a standalone computer that is part of your local network to be used as an endpoint computer.
2. Deploy the installation package to the endpoint computer.
3. Ensure the installation is successful and check the following functionalities:
■
■
Updating: To verify if the endpoint computer is downloading updates from Enterprise
Console, in the endpoint computer, right-click the Sophos protection system tray icon and click Update now. The endpoint computer should be able to download updates from
Enterprise Console.
Management: To verify if Enterprise Console is managing the endpoint. In Enterprise
Console window, ensure the Sophos protection icon besides the endpoint is not grayed out, and it does not have a red cross or a yellow exclamation mark.
After verifying the installation package, you can deploy it to the customers' computers.
28
Managed Service Provider guide for a distributed system
16 Distribute package to customer's computers
Use your RMM system to distribute and run the installer package(s) on the customer's computers.
The details of how to do this will depend on which system you use, and are beyond the scope of this guide.
29
Sophos Endpoint Security and Control
17 Monitoring endpoint security
Once Sophos Endpoint Security and Control is installed on endpoints, you manage groups, policies and other settings via Sophos Enterprise Console, which provides complete status reporting of endpoints. For more details, see the Sophos Enterprise Console Help and Policy Setup guide.
Most MSPs will use their existing RMM system for routine status monitoring, and only use Sophos
Enterprise Console for group/policy configuration, and in the event of a security problem, for detailed endpoint status analysis. Your RMM system is used as the primary method for management and monitoring of all endpoint software (not just Sophos Endpoint Security and
Control).
This section explains how to use the SetData script to provide the most important endpoint status information to your RMM system.
The diagram below shows how the RMM system uses the SetData script to know endpoint status.
30
Managed Service Provider guide for a distributed system
17.1 About the SetData script
The SetData script,
MSPSetData.vbs
, may be run from Windows or called from the command line or a batch file. MSPSetData:
■
■ reads parameters from Sophos Endpoint Security and Control, writes the SESC parameters to the endpoint Windows registry,
■
■ must be run with LOCAL_SYSTEM administrator privileges, must be run in a 32-bit environment. For 64-bit versions of Windows, the 32-bit version of the command prompt is available at
%WINDIR%\SysWOW64\cmd.exe
.
To run the SetData script in command line mode, use the following format:
MSPSetData <base_key> [logFileName]
Where
<base_key>
is the base key within HKEY_LOCAL_MACHINE to write the endpoint parameters and
[logFileName]
is an optional path to a log file.
Note: If you call SetData with the logFileName parameter, it appends log data to any existing log file. If you call SetData frequently, this can result in a very large log file.
Example:
MSPSetData "SOFTWARE\Sophos\ESCStatus" "c:\MSPSetDataLog.txt"
This will write all parameters within
HKEY_LOCAL_MACHINE\SOFTWARE\Sophos\ESCStatus and log to c:\MSPSetDataLog.txt
.
17.2 About the endpoint parameters
The SetData script reads parameters from Endpoint Security and Control and Sophos Client
Firewall, and writes them to the endpoint Windows registry as detailed below, under a configurable hive path root within
HKEY_LOCAL_MACHINE
.
If Endpoint Security and Control or Sophos Client Firewall are not present or not running, their
REG_DWORD parameters are set to -1 and REG_SZ parameters to null.
If Endpoint Security and Control or Sophos Client Firewall are updating, all their REG_DWORD parameters except UpdateInProgress are set to -1 and all their REG_SZ parameters to null.
Parameters list
Registry hive path Parameter/Key
\SAVService\Status\Infected ControlledAppDetected
Description
0: No controlled application detected
1: Controlled application detected (& quarantined)
Type REG_
DWORD
31
Sophos Endpoint Security and Control
Registry hive path Parameter/Key
MalwareDetected
Description Type REG_
0: No malware detected
1: Malware detected & quarantined
PUADetected
0: No PUA detected
1: PUA detected
SuspiciousBehaviorDetected
0: No suspicious behavior detected
1: Endpoint exhibiting suspicious behavior
SuspiciousFileDetected
0: No suspicious files detected
1: Suspicious file detected
\SAVService\Status\LastScan SystemScan
NormalScan
EnterpriseScan
\SAVService\Status\Policy AppControlComplies
SAVComplies
DataControlComplies
DevControlComplies
\SAVService\Application Managed
Time/date of last scan(s) (epoch value) e.g. 1268337010
0: Non-compliant with SEC policy
1: Compliant with SEC policy
\SAVService\Version Data
Major
Minor
0: Independent
1: Managed by SEC
SAV Virus data version e.g.
4.50G
SAV major version # e.g. 9
SAV minor version # e.g. 5
SZ
DWORD
32
Registry hive path Parameter/Key
Extra
\SAVService\Status\Policy OnAccessEnabled
\SAVService\Update UpdateInProgress
\Sophos Client
Firewall\Config
IDECount
LastUpdated
ActiveLocation
DetectedLocation
Disabled
Mode
\Sophos Client
Firewall\Update
\Sophos Client
Firewall\Version
UpdateInProgress
FirewallVersion
Managed Service Provider guide for a distributed system
Description Type REG_
SAV version supplementary information e.g. beta
SZ
0: On-access scanning disabled
DWORD
1: On-access scanning enabled
0: Not updating
1: Updating
Number of Sophos virus identity files present
Time/date of last update dd.mm.yyyy hh:mm:ss e.g.
02.03.2010 18:56:30
SZ
DWORD
1: Primary location
2: Secondary location
0: Operational
1: Passing all traffic
0: Interactive
1: Block unknown
2: Pass unknown
0: Not updating
1: Updating
Firewall version # e.g. 2.0
SZ
33
Sophos Endpoint Security and Control
17.3 Using your RMM to read endpoint parameters
These instructions are generic, since it depends on your specific implementation of remote management.
1. Copy the SetData script to managed endpoint computers.
2. Configure your RMM console to run the script periodically (for example once every four hours), read the endpoint parameter registry values and display them as required with alerts for critical conditions.
You can run the script manually to check that it is working properly and check the values written to the endpoint Windows registry using regedit.
34
Managed Service Provider guide for a distributed system
18 Appendix: Create a protection package using the CLI
Before using this section, read About the Deployment Packager tool
(page 24).
To run the Deployment Packager in command line mode, use the following format as a minimum:
DeploymentPackager.exe -cli -mng yes -cidpath <CIDpath> -sfxpath
<SFXpath> -crt R
where
<CIDpath>
is the path to the relevant central installation directory and
<SFXpath>
is the path of the output package. -crt R automatically removes third-party protection software.
The packager returns a value of zero when run successfully and non-zero for an error condition, together with a message to standard error method (stderr).
Command-line options
You can also use other command line qualifiers, as listed below.
-mng yes
Enable Remote Management.
-mngcfg
Specify path to custom Remote Management configuration files.
-scf
Install Sophos Client Firewall.
-patch <Management Server URL>
This installs Sophos Patch Agent. For the Management server URL enter the reverse proxy address through which the endpoints can communicate with the SEC Server. The address must be a fully qualified domain name or IP address. Example: http://<SEC-Server.msp.com> or http://192.168.0.10.
You must configure the reverse proxy so it redirect the traffic that matches the address http://<SEC-Server.msp.com>/Sophos/Management/Patch/EndpointCommunicator/ to the SEC
Server directly.
-sauonly
Include Sophos AutoUpdate only (chosen remote management and firewall components are downloaded from the update source). If this option is not selected, chosen components are included in the package.
-arch <32bit, 64bit>
Specify the architecture of the package you want to create, either 32-bit or 64-bit.
Note: This option is only applicable if Patch is being installed from packaged CID. If you choose
32-bit or 64-bit the package can be installed only on specific 32-bit or 64-bit operating systems.
35
Sophos Endpoint Security and Control
If you do not specify architecture, a single package is created which can be installed on both 32 and 64-bit operating systems, but the package size will be large.
-updp <update_path>
Updating path.
-user <username>
-pwd <password>
Username and password. The packager obfuscates these in the package. However, if you are saving a Deployment Packager command line with clear username and password in a text or batch file, ensure that it is secure.
-opwd <obfuscated_password>
Obfuscated password. For information on how to obfuscate passwords, see knowledgebase article 13094 .
-nocheck
The paths to the central installation directory and to the output packages are not checked for correctness.
-s
Silent installation.
-ni
Non-interactive installation.
Other options
Any other options are packaged to be run with the installer setup file.
36
Managed Service Provider guide for a distributed system
19 Appendix: MRinit.conf file contents
Following is an example of the MRinit.conf file after modification:
[Config]
"NotifyRouterUpdate"="EM"
"ClientIIOPPort"=dword:00002001
"ClientSSLPort"=dword:00002002
"ClientIORPort"=dword:00002000
"IORSenderPort"=dword:00002000
"DelegatedManagerCertIdentityKey"="NOChhZvtx8i59YN4OVkvtaOYHsA="
"ManagedAppCertIdentityKey"="KeDbiqpDTPaiKSPwXhiS/FxPMaE="
"RouterCertIdentityKey"="+Z3KILDInN7HZn0jbZu4zsLSyfg="
"ServiceArgs"=""
"MRParentAddress"="192.168.0.10, sophos-console.msp.com, sophos-console"
"ParentRouterAddress"="sophos-dmz,sophos-dmz.msp.com"
37
Sophos Endpoint Security and Control
20 Technical support
You can find technical support for Sophos products in any of these ways:
■
Visit the Sophos Community at community.sophos.com/ and search for other users who are experiencing the same problem.
■
■
■
Visit the Sophos support knowledgebase at www.sophos.com/en-us/support.aspx
.
Download the product documentation at www.sophos.com/en-us/support/documentation.aspx
.
Open a ticket with our support team at https://secure2.sophos.com/support/contact-support/support-query.aspx
.
38
Managed Service Provider guide for a distributed system
21 Legal notices
Copyright
©
2012–2016 Sophos Limited. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.
Sophos, Sophos Anti-Virus and SafeGuard are registered trademarks of Sophos Limited, Sophos
Group and Utimaco Safeware AG, as applicable. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
ACE
™
, TAO
™
, CIAO
™
, DAnCE
™
, and CoSMIC
™
ACE
™
, TAO
™
, CIAO
™
, DAnCE
™
, and CoSMIC
™
(henceforth referred to as "DOC software") are copyrighted by Douglas C. Schmidt and his research group at Washington University , University of California, Irvine , and Vanderbilt University , Copyright (c) 1993-2014, all rights reserved. Since
DOC software is open-source, freely available software, you are free to use, modify, copy, and distribute—perpetually and irrevocably—the DOC software source code and object code produced from the source, as well as copy and distribute modified versions of this software. You must, however, include this copyright statement along with any code built using DOC software that you release. No copyright statement needs to be provided if you just ship binary executables of your software products.
You can use DOC software in commercial and/or binary software releases and are under no obligation to redistribute any of your source code that is built using DOC software. Note, however, that you may not misappropriate the DOC software code, such as copyrighting it yourself or claiming authorship of the DOC software code, in a way that will prevent DOC software from being distributed freely using an open-source development model. You needn't inform anyone that you're using DOC software in your software, though we encourage you to let us know so we can promote your project in the DOC software success stories .
The ACE , TAO , CIAO , DAnCE , and CoSMIC web sites are maintained by the DOC Group at the
Institute for Software Integrated Systems (ISIS) and the Center for Distributed Object Computing of Washington University, St. Louis for the development of open-source software as part of the open-source software community. Submissions are provided by the submitter "as is" with no warranties whatsoever, including any warranty of merchantability, noninfringement of third party intellectual property, or fitness for any particular purpose. In no event shall the submitter be liable for any direct, indirect, special, exemplary, punitive, or consequential damages, including without limitation, lost profits, even if advised of the possibility of such damages. Likewise, DOC software is provided as is with no warranties of any kind, including the warranties of design, merchantability, and fitness for a particular purpose, noninfringement, or arising from a course of dealing, usage or trade practice. Washington University, UC Irvine, Vanderbilt University, their employees, and students shall have no liability with respect to the infringement of copyrights, trade secrets or any patents by DOC software or any part thereof. Moreover, in no event will Washington University,
UC Irvine, or Vanderbilt University, their employees, or students be liable for any lost revenue or profits or other special, indirect and consequential damages.
39
Sophos Endpoint Security and Control
DOC software is provided with no support and without any obligation on the part of Washington
University, UC Irvine, Vanderbilt University, their employees, or students to assist in its use, correction, modification, or enhancement. A number of companies around the world provide commercial support for DOC software, however. DOC software is Y2K-compliant, as long as the underlying OS platform is Y2K-compliant. Likewise, DOC software is compliant with the new US daylight savings rule passed by Congress as "The Energy Policy Act of 2005," which established new daylight savings times (DST) rules for the United States that expand DST as of March 2007.
Since DOC software obtains time/date and calendaring information from operating systems users will not be affected by the new DST rules as long as they upgrade their operating systems accordingly.
The names ACE
™
, TAO
™
, CIAO
™
, DAnCE
™
, CoSMIC
™
, Washington University, UC Irvine, and
Vanderbilt University, may not be used to endorse or promote products or services derived from this source without express written permission from Washington University, UC Irvine, or Vanderbilt
University. This license grants no permission to call products or services derived from this source
ACE
™
, TAO
™
, CIAO
™
, DAnCE
™
, or CoSMIC
™
, nor does it grant permission for the name
Washington University, UC Irvine, or Vanderbilt University to appear in their names.
If you have any suggestions, additions, comments, or questions, please let me know.
Douglas C. Schmidt
Apache
The Sophos software that is described in this document may include some software programs that are licensed (or sublicensed) to the user under the Apache License. A copy of the license agreement for any such included software can be found at http://www.apache.org/licenses/LICENSE-2.0
Boost C++ Libraries
Boost Software License - Version 1.0 - August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the “Software”) to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:
The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
THE USE OR OTHER DEALINGS IN THE SOFTWARE.
40
Managed Service Provider guide for a distributed system
Common Public License
The Sophos software that is referenced in this document includes or may include some software programs that are licensed (or sublicensed) to the user under the Common Public License (CPL), which, among other rights, permits the user to have access to the source code. The CPL requires for any software licensed under the terms of the CPL, which is distributed in object code form, that the source code for such software also be made available to the users of the object code form. For any such software covered under the CPL, the source code is available via mail order by submitting a request to Sophos; via email to [email protected]
or via the web at https://www.sophos.com/en-us/support/contact-support.aspx
. A copy of the license agreement for any such included software can be found at http://opensource.org/licenses/cpl1.0.php
ConvertUTF
Copyright 2001–2004 Unicode, Inc.
This source code is provided as is by Unicode, Inc. No claims are made as to fitness for any particular purpose. No warranties of any kind are expressed or implied. The recipient agrees to determine applicability of information provided. If this file has been purchased on magnetic or optical media from Unicode, Inc., the sole remedy for any claim will be exchange of defective media within 90 days of receipt.
Unicode, Inc. hereby grants the right to freely use the information supplied in this file in the creation of products supporting the Unicode Standard, and to make copies of this file in any form for internal or external distribution as long as this notice remains attached.
Loki
The MIT License (MIT)
Copyright
©
2001 by Andrei Alexandrescu
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
OpenSSL Cryptography and SSL/TLS Toolkit
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually
41
Sophos Endpoint Security and Control both licenses are BSD-style Open Source licenses. In case of any license issues related to
OpenSSL please contact [email protected].
OpenSSL license
Copyright
©
1998–2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. ( http://www.openssl.org/ )”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected]
.
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit ( http://www.openssl.org/ )”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
This product includes cryptographic software written by Eric Young ( [email protected]
). This product includes software written by Tim Hudson ( [email protected]
).
Original SSLeay license
Copyright
©
1995–1998 Eric Young ( [email protected]
) All rights reserved.
This package is an SSL implementation written by Eric Young ( [email protected]
). The implementation was written so as to conform with Netscape’s SSL.
This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4,
RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this
42
Managed Service Provider guide for a distributed system distribution is covered by the same copyright terms except that the holder is Tim Hudson
).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
“This product includes cryptographic software written by Eric Young ( [email protected]
)”
The word “cryptographic” can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory
(application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson ( [email protected]
)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The license and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license [including the GNU Public License.]
WilsonORMapper
Copyright
©
2007, Paul Wilson
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
■
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
43
Sophos Endpoint Security and Control
■
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
44
Download
Offentligt link opdateret
Det offentlige link til din chat er blevet opdateret. You may view and manage your chat links after registration here.
Dokument offentligt link
Annonce