Product Guide K85300-0010 -- Kidde Conventional Systems

Product Guide K85300-0010 -- Kidde Conventional Systems
Product Guide
Conventional Fire alarm solutions
for small and mid-sized buildings
See what’s possible now.
Kidde Conventional Systems Product Guide
Conventional fire alarm solutions
for small to mid-sized buildings.
1016 Corporate Park Drive
Mebane, NC 27302
© 2016 United Technologies Corporation. All rights reserved. Specifications subject to change without notice. Kidde is part of UTC Climate,
Controls & Security, a unit of United Technologies Corporation.
K85300-0010
A whole new way
of looking at life
safety.
Training on your terms...
Kidde self-study courses are designed by
educators with years of experience in the life
safety field. They give you the skills you need
to take full advantage of the innovative features
that our systems have to offer. All Kidde
courses may be used towards continuing
education credits.
Idea Guys who make you look
good...
Got a difficult job that needs some expert
guidance? Struggling with a tricky application
problem? Struggle no more. Our application
specialists offer free advice on how to make the most
of even the toughest installations. From panel configuration to
field wiring and devices – you’re just a call away from a Kidde
expert dedicated to getting you on the right track.
Tech Support in synch with your needs...
All our support technicians are NICET Certified life safety professionals
who combined have more than 180 years experience in the field. They
have their own Trouble Simulation Lab, ISO 9001: 2 Certification, and the
stamina to see every issue through to a successful resolution. Oh yes, and
our Tech Support is free. 24/7. Really.
A three-year warranty that speaks for itself...
Every Kidde system you purchase is underwritten by one of the most
comprehensive warranties in the business. This is your assurance that
Kidde equipment will bring long-term value to every installation with
quality products, innovative technology, and our three-year pledge of
uncompromising excellence.
Greater than the sum of its parts...
Designed from the ground up to work in concert with one another, our systems are true systems – not patchworks. In fact, Kidde remains one of the
only life safety suppliers today that engineers and manufactures fire alarm
control panels, initiating devices, and notification appliances.
Control Panels
The simplicity of
conventional wiring with
valuable features found only
among high-end systems...
arge
No-ch al
ic
techn t!
r
suppo
Data Sheet K85005-0126
These easy-to-install fire alarm
systems demonstrate that value
doesn’t have to come at the expense
of quality, and that small building
owners don’t have to settle for
second-rate fire protection. Kidde FX
comes with a full lineup of advanced
features designed expressly for new
and retrofit projects that cry out for
simplicity, yet need
state-of-the-art
protection.
Ordering Information
10R for 10 Class B IDCs
5R for 5 Class B IDCs
FX-XXRD Conventional system
Add D for DACT U/D dialer
Kidde takes the very best
conventional fire alarm
technology available today
and blends it with features
that benefit installers,
contractors, building owners
and occupants to provide
an effective and economical
solution for all small building
needs...
• Automatic drift compensation
extends detector life
• Precision UL 1971 signal synchronization and
optional audible silence over just two wires
• Ten-zone panels offer up to 7.5
amps of available NAC power
• Fully integrated upload/download
communications enables PC programming
and off-premise monitoring
• Zone or NAC pairs convertible
to single Class A circuits
• Combination Waterflow and Supervisory zones
• NACs programmable by zone and individually
selectable for continuous, temporal or coded
outputs, or the FX synchronization protocol.
Specifications
Initiating
Circuits
Notification
Circuits
Class B
Class A
Class B
Class A
Power Supply
NAC Voltage Rating
Maximum NAC
current
AC Input
@ 120 Vac 60 Hz...
Panel Current Draw
Standby...
Alarm...
Panel Battery Charge
Capacity
FX-10
10
0
4
0
8
1
2
1
6
4
2
0
2
3
4
5
2
0
1
2
7.5 amps total
24 Vfwr
2.0 amps each,
7.0 amps total
FX-5
5
0
2
0
3
1
1
2
0
1
4.25 A total
2.0 A each
3.5 A total
2.2 amps
1.25 A
128 mA
242 mA
104 mA
224 mA
Two 24 Ah,
10 Ah max in
cabinet
Two 24 Ah batteries,
17 Ah in cabinet
1
Remote Annunciation & Control
The Kidde FX serial
remote annunciator bus
can run up to 1,000 feet!
Remote System
Indicator (FSRSI)
Ideal for common
system annunciation.
Includes five LEDs and
a local silence/lamp
test switch. The LEDs
indicate power status,
alarm, supervisory,
trouble and ground fault.
The silence switch will
silence the onboard
trouble buzzer if active.
Remote Zone
Indicator
(FSRZI-A)
Used to indicate
zones in the alarm.
It contains five red
LEDs. IDCs annunciated are determined
by jumper settings.
The panel can support two modules
programmed for
each selection.
Remote Zone
Indicator (FSRZISA)
Used to indicate zones
in alarm or supervisory
states. It contains five
red and yellow LEDs.
IDCs annunciated are
determined by jumper
settings. The panel
supports two modules
programmed for each
selection.
Three year
warranty!
Compatible electrical box
I
RZ
FS r
o I
S
R
FS
The FSRSI can be installed alone or with one or more FSRZI-As.
The FSRSI and FSRZI-A require trim plates (ordered separately).
These are available in one, two or three gang models.
Each panel will support two FSRSIs.
2
Remote LED annunciators
K-FSRA10, K-FSRA10C
The K-FSRA10 can accommodate up to ten zones. It includes ten
red/yellow bi-color LEDs for indicating active zones, and ten yellow
LEDs for indicating zone troubles. The (C) option adds common
control switches. Both versions mount to standard North American
two-gang or 4-inch square electrical boxes. A surface box is also
available.
Remote Relay Module
The Remote Relay Module (FSRRM24) is
another feature of the system that sets Kidde FX
apart from other panels in its class. This module
has five Form C relays rated at 1 amp each. It
can be configured to function in either a zone relay mode or a common system mode. The FSRRM24 mounts on a plastic snap track
and can be installed in any listed fire alarm enclosure. The panel
will support two RRMs of each configuration for a total of six on the
10-zone panel.
Ordering Information
Annunciators
FSRSI
FSRZI-A
FSRZI-SA
FSAT1
FSAT2
FSAT3
FSAT4
K-FSRA10
K-FSRA10C
FSUIM
Data Sheet K85005-0126
Remote System Indicator
Remote Zone Indicator - Alarm
Remote Zone Indicator - Alarm/Supervisory
Annunciator Trim Plate, 1 gang
Annunciator Trim Plate, 2 gang
Annunciator Trim Plate, 3 gang
Annunciator Trim Plate, 4 gang
10 zone remote annunciator for FX-10
10 zone remote annunciator with common controls (FX-10)
Common Function Graphic Driver/Interface - 9 relays, 5
inputs for common system indicators and controls.
Control Relays
FSRRM24
Remote Relay Module – Five Form C relays.
FSRRM24
11” Mounting track. Holds up to 4 FSRRM24s.
-S11
3
Initiating Devices
Intelligent features
at a conventional price!
Free
application
support!
Exclusive built-in drift compensation
dramatically extends the time between
cleanings – and if cleaning is ever
necessary, the exclusive optical chamber
takes just seconds to replace!
4
Initiating Devices
700 Series
Two- and Four-wire
Smoke/Heat Detectors
Data Sheet K85001-0598
The Kidde conventional photoelectric smoke detector is an interchangeable head and base detector with a light-scattering optical
sensor that provides outstanding stability and excellent response to
a wide range of fires. Model 721UT photoelectric detectors include
integral fixed temperature and rate-of-rise heat detectors. The 721UT
provides remote alarm and trouble LED driver outputs. Also available
is the 713-5U electronic heat detector head for areas too dusty for
smoke detection.
711U
721UT
731U
741U
701U
702U
702RU
Smoke detector head only, photoelectric, two-wire
Smoke detector head only, photoelectric, two-wire w/integral
heat, output for remote LED
Smoke detector head only, photoelectric, two-wire, use
702RU base for aux. relay functionality
Smoke detector head only, photoelectric, four-wire
Smoke detector base, 3 terminals, 6" dia.
Smoke detector base, 6 terminals, 6" dia.
Smoke detector base, 6 terminals, aux. relay, 6" dia.
500 Series
Self-Diagnostic
Smoke Detectors
Data Sheet K85001-0606
These photoelectric smoke detectors have interchangeable heads
and bases. They feature a light-scattering optical sensor that provides
outstanding stability and excellent response to a wide range of fires.
541NB
541NBXT
541NCSXT
Photoelectric Smoke Detector, 4-wire
Photoelectric Smoke Detector, 4-wire, heat
Photoelectric Smoke Detector, 4-wire, sounder, heat
Keep plenty of spare optical
chambers on-hand at all times...
211-10PKG
Replacement optical chambers (package of 10)
Heat Detectors
CR/CF Series, Metal housings
Data Sheet K85001-0367
CR135-2
CR200-2
CF135-2
CF200-2
Combination Rate-of Rise and 135°F (57°C) Fixed
Temperature
Combination Rate-of Rise and 200°F (93°C) Fixed
Temperature
135°F (57°C), Fixed Temperature
200°F (93°C), Fixed Temperature
280B-PL Series, Plastic Housings
Data Sheet K85001-0261
283B-PL
284B-PL
135°F (57°C), Fixed Temperature
194°F (90°C), Fixed Temperature
5
Initiating Devices
270 Series
Conventional Fire Alarm Stations
Data Sheet K85001-0303
270 Series Non-Coded Fire Alarm Stations are sturdy, attractive,
and designed for economical installation. All non-coded stations
are designed for either flush or surface mounting. For flush mounting a 4 inch standard North American square box with single gang
plaster cover should be used.
270A-DPO
270A-SPO
270P-SPO
Double-pole fire alarm station
Single-pole fire alarm station
Single-pole fire alarm station with pre-signal
276/277 Series
Single-Action Fire Alarm Stations
Data Sheet K85001-0183
The Cat. No. 276B/277B series noncoded fire alarm stations are
contemporary styled Lexan stations and are flexibly designed to
meet a wide variety of application requirements and operational
sequences.
276B-1110
Single-pole fire alarm station, tool reset
276B-1120
Single-pole fire alarm station, key reset
277B-1110
Single-pole fire alarm station, tool reset, wire leads
EC-50R/-100R
Reflective Beam Detector
Data Sheet K85001-0560
The EC-50R/-100R comprises a transmitter and receiver in a
single enclosure and is usually installed between 19 inches and 24
inches below the ceiling. The transmitter emits an invisible infrared
light beam that is reflected via a prism mounted directly opposite
and with a clear line of sight.
EC-50R
Reflective Beam Detector c/w test filter and one reflector
EC-100R
Reflective Beam Detector c/w test filter and four reflectors
EC-LLT
Ground Level Test Station
SuperDuct Series
Duct Smoke Detectors
Data Sheet K85001-0583 (four-wire)
Data Sheet K85001-0585 (two-wire)
SuperDuct detectors continually sample air flow in the HVAC duct
and initiate an alarm condition whenever smoke is detected. Air
velocity in the duct may be as low as 100 ft/min.
ESD-CJ
ESD-SJ
ESD-4WJ
ESD-CT
ESD-ST
SD-2W
6
4-wire Controller (RJ45)
4-wire Sensor (RJ45)
4-wire Controller w/sensor (RJ45)
4-wire Controller (terminals)
4-wire Sensor (terminals)
2-wire SuperDuct Detector
Initiating Devices
30-3013
Explosionproof
Smoke Detector
Data Sheet K85001-0645
Model 30-3013 detectors are high performance smoke detectors
built for use in hazardous locations. They are corrosion-resistant
and feature a non-conducting aluminum alloy retaining ring that
protects the detector sensor against the effects of explosions and
other catastrophic events.
30-3013A1N12F
Explosionproof Smoke Detector
MPSR Series
Hazardous Location Fire Alarm Stations
Data Sheet K85001-0588
MPSR Series manual pull stations are noncoded fire alarm stations
solidly constructed of die-cast material. All components are prepainted or have plated surfaces to inhibit corrosion. Weatherproof
manual stations are rated for outdoor use. Explosionproof/weatherproof manual stations are rated for Class I Group B (hydrogen) C
& D, Class II Groups E. F, G, Class III environments, and are rated
NEMA 4X for outdoor use.
Switch Contacts
Single Action
Harsh Environment
Single
Double
Manual Stations
Pole
Pole
K-MPSR1-D45W
ü
K-MPSR1-D45WX (explosionproof)
ü
K-MPSR1-DHTW
ü
K-MPSR1-S45W
ü
K-MPSR1-SHTW
ü
Reset
Tool
Key
ü
ü
ü
ü
ü
XAL53
Hazardous location Fire Alarm Station
Data Sheet K85001-0371
The XAL53 is an extremely rugged double-action fire alarm station
suitable for hazardous locations. The device is activated by lifting
the front cover and pulling down the ring. This two-step process
prevents unintentional operation.
XAL53
Hazardous Location Fire Alarm Station
7
Notification Appliances
UL 1971
compliant with
Kidde panels
and boosters!
About the size
of a deck of
playing cards.
Do more with less.
Kidde control panels work with
exclusive signaling technology that
delivers independent horn control
over just a single pair of wires. This
valuable feature makes it possible
to silence horns while the strobes
remain active!
Plus...
Ceiling devices are rated for wall or
ceiling mount applications.
Wall and ceiling devices are available
with white or red housings – and with
optional “FIRE” markings.
Field-configurable light and sound
output means fewer devices to stock,
and greater flexibility.
The “Running Man” icon meets code
requirements, overcomes language
barriers, and eliminates lens marking
headaches.
8
Notification Appliances
Kidde brings
on-demand
Wall
Horns & Strobes
Data Sheet K85001-0573
signaling to every
Wall strobe, white housing.
application with
an unparalleled
range of fieldconfigurable
options like
EG1RF-HDVM strobe
Add R for
red housing
VM for selectable cd strobe
or...V1575 for fixed 15/75 cd
Wall
horns and
high/low dB
and strobes
with selectable
candela output
Chimes
Data Sheet K85001-0574
chimes with
output settings,
AddHD for temporal horn
with high or low dB output
or...P for steady horn
Add F for
FIRE marking
Wall chime, white housing
with high or low dB output.
EG1RF-CVM strobe
Add R
for red
housing
Add F for
FIRE marking
Add VM for chime-strobe
with selectable 15, 30, 75,
or 110 cd output
and flash rate –
options that put
you in the driver’s
Ceiling Horns & Strobes
Data Sheet K85001-0559
seat when time
is short, budgets
Ceiling Horn-strobe, white,
selectable 15,30,75, or 95 cd
are slim, and
manpower is at a
premium.
EGCRF-HDVMH Horn-strobe
Add R
for red
housing
Add H for
selectable 95, 115,
150, or 177 cd output
Add F for
FIRE marking
Low Frequency Signals
Data Sheet K85001-0639
Provides the benefits of
Genesis life safety signals with
output suitable for sleeping areas and
other applications requiring low frequency audible tones.
Low Frequency Wall Signal
F for FIRE marking
N for no marking
G4LFRF-HVM Horn-Strobe
R for
red housing
W for white
HVM for Horn-Strobe
H for Horn-Only
9
Voice Audio
ANS series
Audio Notification System
Data Sheet K85001-0587
This self-contained system is available in 25, 50, or 100 Watt models.
Includes an amplifier, tone generator, digital message repeater (DMR), and
supervisory interface. It is compatible with Kidde field configurable speakers and speaker-strobes.
Voice of Authority.
Wall Speakers, Strobes
Data Sheet K85001-0642
Selectable ¼, ½, 1, or 2 watt taps.
High Fidelity Wall Speaker/Speaker-strobe
Omit for speaker only
G4HF R F-S2 VM C
W for white housing
R for red housing
VM for selectable
standard cd output
F for FIRE marking
A for ALERT marking
N for no marking
C for clear lens
A for amber lens
S7 for 70 V model
S2 for 25 V model
Ceiling Speakers, Strobes
Data Sheet K85001-0641
Selectable ¼, ½, 1, or 2 watt taps.
High Fidelity Ceiling Speaker/Speaker-strobe
Omit for speaker only
GCHF R F-S2 VM C H
C for clear lens
A for amber lens
W for white housing
R for red housing
VM for standard cd output
Add H for high cd output
F for FIRE marking
A for ALERT marking
N for no marking
Add H for high
cd output
S7 for 70 V model
S2 for 25 V model
Outdoor Speakers
and Speaker-Strobes
Data Sheet K85001-0626
Selectable ¼, ½, 1, or 2 watt and 25 V or 70 V.
WG4RF-SVMC speaker-strobe
R for
red housing
W for white
SVMC for 15/29/70/87 cd
SVMHC for 102/123/147/161 cd
S for speaker only
F for FIRE marking, N for none
Power Supplies
Booster Power Supplies
Data Sheet K85005-0125
Booster and Auxiliary power supplies contain all
the necessary circuits to monitor and charge batteries, control and supervise NAC circuits, monitor
controlling inputs from external sources, and
provide UL 1971 strobe synchronization.
EBPS6A
EBPS10A
APS6A
APS10A
10
6.5 Amp Booster Power Supply
10 Amp Booster Power Supply
6.5 Amp Auxiliary Power Supply
10 Amp Auxiliary Power Supply
Special Application Signals
Outdoor
Horns and Horn-Strobes
Data Sheet K85001-0628
WG4RF-HVMC horn-strobe
R for
red housing
W for white
HVMC for selectable standard cd output
HVMHC for selectable high cd output
H for horn only
F for FIRE marking, N for none
438/439 Series
Fire Alarm Bells
Data Sheet K85001-0333
Fire Alarm Bells are specially designed for fire alarm applications.
The gongs are made of selected alloy steel to give the loud, resonant tones necessary in fire alarm systems.
438D-6N5(R)
438D-10N5(R)
439D-6AW(R)
439D-10AW(R)
438D-8N5
439D-8AW
6 inch (150mm) Vibrating, Diode, Red
10 inch (250mm) Vibrating, Diode, Red
6 inch (150mm) Vibrating, Diode, Red
10 inch (250mm) Vibrating, Diode, Red
8” (200mm) Vibrating, Diode, Gray
8” (200mm) Vibrating, Diode, Gray
116 Series
Hazardous Location Strobes
Data Sheet K85001-0624
116 Series hazardous location strobes are in-rush
current limited life safety signaling appliances designed for installation in hazardous environments.
Rigid specifications and state-of-the-art technology
provide for high visual output and low maintenance.
116DEGEX-FJ
116EX-B
116EX-C
116EX-P
116-GRD
116-GLOBE
Explosionproof Strobe, Diode Polarized
Wall bracket mounting elbow (required for wall mount)
Ceiling/wall mounting module (required for wall mount)
Pendant mounting module - ¾” (19 mm) NPT
Lens Guard
Replacement Globe
888D-N5 & 889D-AW
Hazardous Location Horns
Data Sheet K85001-0397
888D and 889D hazardous location horns are diode-polarized,
heavy duty, high decibel vibrating horns intended for use in life
safety systems in hazardous (classified) and outdoor locations.
Each unit is supplied with a sealing fitting for ¾-inch -14 National
Pipe Taper (NPT) nipple, and wire leads for the electrical connection to the life safety system notification appliance circuit.
888D-N5
889D-AW
Hazardous location horn – 120 Vac
Hazardous location – 24 Vdc
11
Door Holders
1500 Series
Electromagnetic
Door Holders
Data Sheet K85001-0421
Electromagnetic door holders keep doors open until signaled by the
fire alarm system, a heat detector, a smoke detector, or an electrical switch. Fail-safe operation is an inherent feature of these door
holders. If power fails, doors are released automatically, but may be
opened or closed manually at any time. All units are free of moving
parts, are self-contained, and require no maintenance. Door holders
have a holding force of approximately 15-25 Lbf (66-111N).
1501-AQN5
1502-AQN5
1504-AQN5
1505-AQN5
1508-AQN5
1509-AQN5
Floor Mounted (Single Door)
Floor Mounted (Double Door)
Flush Wall Mounted (Long Catch Plate)
Flush Wall Mounted (Short Catch Plate)
Surface Wall Mounted
Completely Flush Wall Mounted
Relays
MR-199 Series
Heavy Duty Power Relays
Data Sheet K270065
The MR-199 Heavy Duty Power Relays are
designed for control applications where 30
Amp DPDT contacts are required. Two models
are available: a 115 Vac coil and a 24 Vdc coil,
each of which may be mounted in a rugged
steel enclosure.
MR-199X-13/C
MR-199AX-14/C
DPDT, 24 Vdc, mounted in enclosure
DPDT, 120 Vac, mounted in enclosure
PAM-1
Multi-Voltage Control Relay
Data Sheet K270066
The PAM-1 Relay is encapsulated multi-voltage
device providing 10 Amp Form C contacts. The relay
may be energized by one of three input voltages: 24
Vac, 24 Vdc, or 115 Vac.
PAM-1
Single SPDT relay with LED, double-sided adhesive tape,
mounting screw and 6 in (150 mm) leads.
MR-100 & MR-200 Series
Multi-Voltage Control Relays
Data Sheet K270062
The MR-Series Multi-Voltage Control Relays offer
SPDT or DPDT 10 Amp contacts which may be
operated by one of four input control voltages. A
single relay may be energized from a voltage source
of 24 Vdc, 24 Vac, 115 Vac or 230 Vac by wiring to
appropriate input terminals.
MR-101/C
MR-201/C
12
Single SPDT relay with LED mounted in metal enclosure
Single DPDT relay with LED mounted in metal enclosure
See what’s possible now.
Contact your Kidde
representative for
comprehensive product
information.
Contact us...
Email:kidde.fire@fs.utc.com
Web: www.kiddefx.kidde.com
Kidde is a UTC brand.
1016 Corporate Park Drive
Mebane, NC 27302
© 2016 United Technologies Corporation. All rights reserved. Specifications
subject to change without notice. Kidde is part of UTC Climate, Controls &
Security, a unit of United Technologies Corporation.
K85300-0010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising