GN3475R1 CO-9B Retail Manual BOATS CERT DRAFT 2.indd

GN3475R1 CO-9B Retail Manual BOATS CERT DRAFT 2.indd
Sprue Safety Products Ltd. Artwork Information
Ensure that you are printing / manufacturing from the original artwork file and not a preview
CONFIDENTIAL: The information provided in this document is proprietary to Sprue Aegis Plc/FireAngel Ltd
and as such should only be used/shared for the exclusive manufacture of those products specified.
Title/Description:
Used On / Used For:
Supplier:
Drawing No: GN3475
User Manual
CO-9B retail
PACE
Revision: 1
Material:
Size:
Print Colours:
Drawn By:
60GSM Wood Free Paper W - 121mm / H - 129mm BLACK
Hannah Brannon
User Manual
CARBON MONOXIDE
POISONOUS GAS ALARM
CO-9B
1
Featur
Carbon
it can a
family
Where
detect
How to
Battery
replac
EN 50291-1: 2010
EN 50291-2: 2010
KM 551504
Opera
CO-9B
GN3475 / R1
A Sprue Brand
Sprue Safety Products Ltd.
Vanguard Centre, Sir William Lyons Road, Coventry CV4 7EZ UK
Technical Support: 0800 141 2561 / EIRE dial: 1-800 523171
Email: [email protected] / Web: www.fireangel.co.uk
2
Note:
format
CONTENTS
Features . . . . . . . . . . . . 4
Carbon monoxide and how
it can affect you and your
family . . . . . . . . . . . . . 4
Understanding the
product’s indicators . . . .
12
Maintaining / testing your
detector . . . . . . . . . . . 13
Where to install your
detector . . . . . . . . . . . . 6
What to do in the event
of an alarm . . . . . . . . . 13
How to install your detector . 8
Technical information . . .
Battery installation /
replacement . . . . . . . . . 9
Disposal . . . . . . . . . . . 14
Operating features . . . . . 10
14
Warranty . . . . . . . . . . . . 15
Note: This user manual is also available in large text and other
formats. Please call 0800 141 2561 for further information.
3
FEATURES
• An advanced electrochemical sensor
designed to accurately measure
low levels of carbon monoxide (CO)
providing an early warning of toxic CO
levels in your home.
• Detects carbon monoxide continuously.
• Resistant to false alarms caused by
normal household contaminants.
• Sounds a loud 85dB alarm (at 1metre
(3 feet)) to alert you in case of an
emergency.
• Test/Reset button.
• Regular self-check to ensure detector is
operating correctly.
• Simple to mount, portable, ideal for
travelling.
• Certified to the European Carbon
Monoxide Alarm Standard EN 50291-1:
2010 and EN 50291-2: 2010.
• 7 year warranty.
• End of life indication.
CARBON MONOXIDE
AND HOW IT CAN
AFFECT YOU AND
YOUR FAMILY
Carbon monoxide is a dangerous,
poisonous gas that kills hundreds of
people each year and injures many more.
It is often referred to as the silent killer
because it has no odour or taste and
4
cannot be seen. Like oxygen, CO enters
the body through the lungs during the
normal breathing process. It competes
with oxygen by replacing it in the red
blood cells, thereby reducing the flow of
oxygen to the heart, brain and other vital
organs. In high concentrations, CO can
kill in minutes.
Many cases of reported carbon monoxide
poisoning indicate that while victims are
aware they are not feeling well, they
become disorientated and unable to save
themselves by either exiting the building
or calling for assistance. Exposure during
sleep is particularly dangerous because
the victim usually does not wake up.
Symptoms of CO poisoning
The following symptoms may be related
to CO poisoning which all household
members should be made aware of:
• Mild Exposure: Slight headache,
nausea, vomiting, fatigue (often
described as ‘flu-like’ symptoms).
• Medium Exposure: Severe throbbing
headache, drowsiness, confusion, fast
heart rate.
• Extreme Exposure: Unconsciousness,
convulsions, cardiorespiratory failure,
death.
Your CO detector monitors the level
of CO as parts per million (ppm) in the
atmosphere surrounding the detector.
35ppm The maximum allowable
concentration for continuous
200ppm
400ppm
800ppm
Should y
you or y
windows
turn off
the prem
should b
of the
entering
should b
the effec
Commo
• Oil an
• Portab
• Oil or
• Gas o
•Barbe
• Clogg
• Wood
• Cigare
enters
ng the
mpetes
he red
flow of
er vital
CO can
noxide
ms are
l, they
to save
uilding
during
ecause
up.
related
sehold
of:
,
s).
bbing
on, fast
sness,
ailure,
e level
in the
ctor.
uous
exposure for healthy adults
in any 8 hour period, as
recommended by the
Occupational Safety and Health
Administration (OSHA).
200ppm Slight headache, fatigue,
dizziness, nausea after 2 - 3
hours.
400ppm Frontal headaches within 1 - 2
hours, life threatening after 3
hours.
800ppm Dizziness, nausea and
convulsions within 45 minutes.
Unconsciousness within 2
hours. Death within 2 - 3 hours.
Should you suspect CO may be affecting
you or your family, open the doors and
windows of your property to ventilate,
turn off your appliances and evacuate
the premises. At this time the authorities
should be contacted to locate the source
of the carbon monoxide before reentering the building. Medical attention
should be sought for anyone suffering
the effects of CO poisoning.
Common sources of CO
• Oil and gas boilers
• Portable generators
• Oil or solid fuel cookers
• Gas or paraffin heaters
•Barbecues
• Clogged chimneys
• Wood or gas fireplaces
• Cigarette smoke
• Gas appliances
• Any fossil fuel-burning appliance
WARNING: This carbon monoxide
detector is not a combustible gas
detector, nor a smoke detector. Please
install the proper detectors to detect
combustible gases, or smoke.
This CO detector should not be seen as
a substitute for the proper installation,
use and maintenance of fuel-burning
appliances
(including
appropriate
ventilation and exhaust systems), nor the
sweeping of chimneys.
WARNING: Variables relating to your
fuel-burning appliances can change at
any point eg. the flue or chimney could
suddenly become blocked or damaged,
appliances may stop running correctly
or circumstances in neighbouring
properties may change resulting in the
presence of carbon monoxide. For this
and other reasons do not use this carbon
monoxide detector on an intermittent
basis, or as a portable detector for trying
to trace one source of the spillage of
combustion products from fuel-burning
appliances or from chimneys.
Do not:
• IGNORE ANY WARNING FROM YOUR
CO DETECTOR!
• Burn charcoal inside your home,
caravan, tent or cabin.
5
• Install, convert or service fuel-burning
appliances without proper knowledge,
skill and expertise.
• Use a gas cooker for heating a room.
• Operate unvented gas burning
appliances using paraffin or natural gas
in closed rooms.
• Operate petrol-powered engines
indoors or in confined areas.
• Barbecue indoors, or in an attached
garage.
• Ignore a safety device when it shuts an
appliance off.
Always:
• Buy appliances accepted by a
recognised testing laboratory.
• Install appliances according to the
manufacturer’s instructions.
• Have appliance installations carried out
by professionals (for gas appliances
engineers should be registered on the
Gas Safe register).
• Have your appliances checked regularly
by a qualified service engineer.
• Have your chimneys and flues cleaned
professionally every year.
• Make regular visual inspections of all
fuel-burning appliances.
• Open windows when a fireplace or oil/
solid fuel cooker is in use.
• Only install CO detectors that meet the
requirements of EN 50291-1: 2010 and
EN 50291-2: 2010 in your home
• Be aware of CO poisoning symptoms.
6
• Educate yourself and your family on
the sources and symptoms of CO
poisoning and how to use your carbon
monoxide detector.
WHERE TO INSTALL
YOUR DETECTOR
This CO alarm is
suitable for use in
domestic premises
(caravan holiday homes), caravans, motor
caravans and boats.
The following advice is applicable to all
intended applications, there are special
instructions at the end of this section
relating to positioning in caravan holiday
homes, caravans, motor caravans and
boats.
WARNING: This detector will only
indicate the presence of carbon monoxide
gas at the sensor. Carbon monoxide gas
may be present in other areas.
In which room should the detector
be installed?
Ideally, an apparatus should be installed
in every room containing a fuel-burning
appliance. Additional apparatus may
be installed to ensure that adequate
warning is given for occupants in other
rooms, by locating apparatus in:
• Remote rooms in which the occupant(s)
spend considerable time whilst awake
and from which they may not be able
to hear an alarm from apparatus in
anoth
• Every
Howeve
applianc
the num
followin
when d
apparatu
• Locate
contai
applia
• Locate
occup
• If the
single
bedro
put as
as pos
perso
• If the
norma
room)
outsid
be hea
remot
to a ty
room(
applia
Where i
the dete
Apparatu
fuel-burn
ceiling m
applies:
y on
O
carbon
LL
R
alarm is
r use in
premises
s, motor
le to all
special
section
holiday
ans and
l only
noxide
de gas
tector
stalled
urning
s may
equate
n other
upant(s)
awake
e able
s in
another part of the premises, and;
• Every sleeping room.
However, if there is a fuel-burning
appliance in more than one room and
the number of apparatus is limited, the
following points should be considered
when deciding where best to put the
apparatus:
• Locate the apparatus in a room
containing a flueless or open-flued
appliance, and;
• Locate apparatus in a room where the
occupant(s) spend most time.
• If the domestic premises is a bedsit (a
single room serving as both sitting and
bedroom) then the apparatus should be
put as far from the cooking appliances
as possible but near to where the
person sleeps.
• If the appliance is in a room not
normally used (for example a boiler
room), the apparatus should be put just
outside the room so that the alarm may
be heard more easily. Alternatively, a
remote alarm siren may be connected
to a type A apparatus located in a
room(s) containing a fuel-burning
appliance.
Where in the room should I place
the detector?
Apparatus located in the same room as a
fuel-burning appliance, for both wall and
ceiling mounted apparatus the following
applies:
a. The apparatus should be at a
horizontal distance of between 1m and
3m from the potential source.
b. If there is a partition in a room, the
apparatus should be located on the
same side of the partition as the
potential source.
c. Carbon monoxide detectors in rooms
with sloped ceilings should be located
at the high side of the room.
In addition to the above the following must
be observed if the apparatus is located on
a wall:
a.It should be located close to the ceiling;
b.It should be located at a height greater
than the height of any door or window;
c.It should be at least 150mm from the
ceiling.
If the apparatus is located on the ceiling
it should be at least 300mm from any
wall and any ceiling obstruction e.g. light
fittings.
Apparatus located in sleeping rooms or
located in rooms remote from the fuelburning appliance should be located
relatively close to the breathing zone of
the occupants.
Caravans and boats
Caravans and boats may have additional
risks of carbon monoxide ingress through
air vents due to the nearby presence of
other vehicles, engines, generators or
barbecues, however this does not change
the basic guidance on location of the
7
alarm. Caravans and boats should be
fitted with an alarm in the same room as
any combustion appliance(s), located in
accordance with previous advice in this
section. If the caravan has a single living
space which incorporates the sleeping
accommodation, it can be considered to
be equivalent to a bedsit, and a single
alarm is sufficient. However, any sleeping
accommodation which is in a separate
room from the combustion appliance(s)
should also contain an alarm, located in
accordance with previous advice in this
section.
It is not always possible to find an
optimum location for an apparatus,
for example, a small caravan may not
have suitable vertical surfaces available.
Nevertheless, when fitting an apparatus
in such situations, the two most important
considerations
when
selecting
an
appropriate location are:
• Not mounting the apparatus directly
above a source of heat or steam; and
• Mounting the apparatus at a distance
of 1 – 3 m from the nearest edge of the
potential source.
HOW TO INSTALL YOUR
DETECTOR
NOTE: This apparatus should be installed
by a competent person who feels able to
install it according to the instructions.
Firstly write the installation date on
your detector in the area provided. We
recommend that your detector is installed
on the wall.
To activ
remove
disabling
need to
tab or re
To mount on a wall or ceiling:
Please ensure that you use the screws
provided, as they were chosen specifically
for use with this product. Use the template
provided for guidance on marking hole
positions. Drill holes into the wall. Insert
the plastic wall plugs. Screw in the screws.
Ensure screws are protruding from the
wall by 3mm to allow detector to slot onto
screws.
To place on a shelf:
The base of the detector has been designed
to allow it to stand freely on a shelf.
WARNING: When placing on a shelf,
please adhere to the same positional
recommendations as described above.
Drill hole spacing
90mm
8
I
R
aIf the d
mount
mount
bRemov
back o
cReplac
1.5 vol
page 1
makin
way ro
those
Produc
effect
Replac
detect
YOUR
installed
s able to
ons.
date on
ded. We
installed
BATTERY
INSTALLATION /
REPLACEMENT
To activate your alarm you will need to
remove the battery cover, and pull the
disabling tab out of the product. If you
need to deactivate your alarm reinsert the
tab or remove the batteries.
screws
ecifically
emplate
ng hole
ll. Insert
screws.
rom the
slot onto
designed
lf.
a shelf,
ositional
bove.
Press ridged
area in and
slide door out
to reveal battery
compartment
aIf the detector is already wall or ceiling
mounted then unhook it from the
mounting screws.
bRemove the battery cover located on the
back of the detector.
cReplace the batteries with 2 x approved
1.5 volt AA size alkaline batteries (see
page 16 for recommended batteries),
making sure the batteries are the correct
way round. Use of batteries other than
those recommended by Sprue Safety
Products Ltd may have a detrimental
effect on the detector’s operation.
Replace the battery cover and return the
detector to its original position.
dYour advanced detector requires a
short ‘warm-up’ period before it is fully
operational.
If you have followed all of the above
steps correctly, your unit will begin
monitoring for CO in around 3 minutes.
When the 3 minute warm-up period
is complete, the Power LED will flash
green once per minute to indicate that
the alarm is receiving power from the
batteries and is fully operational.
eTest the sounder, batteries and circuitry
by pressing and holding the Test/Reset
button for 1 second. The sounder should
sound as soon as the button is pressed,
9
and the Alarm LED will illuminate red
for a short time indicating that the
sounder is working and the batteries are
providing power to the unit. This test
for the sounder, batteries and circuitry
should be performed weekly.
WARNING: Prolonged exposure to the
sounder in close proximity to your ears
may damage your hearing.
Under normal operating conditions, the
batteries should last for at least 12 months.
The detector will not protect against the
risk of carbon monoxide poisoning when
the batteries have drained.
Testing the sounder, batteries and
circuitry
Test the sounder, batteries and circuitry by
pressing and holding the Test/Reset button
for 1 second to confirm that the detector
is operating properly. The sounder should
sound as soon as the button is pressed,
and the Alarm LED will illuminate red,
indicating that the sounder is working and
the batteries are providing power to the
unit. This test for the sounder, batteries
and circuitry should be performed weekly.
WARNING: Prolonged exposure to
extreme high or low temperatures may
reduce the life of the batteries.
OPERATING FEATURES
NOTE: Aerosol CO may be used in order
to avoid having to burn incense sticks.
Your detector offers many features which
set it apart from other CO detectors on the
market today.
Read all steps thoroughly before
attempting to test your the sensor.
10
Step 2
Test
Bu
Testing the sensor
CAUTION: Sensor testing should only
be performed by a responsible adult. This
test should only be performed once a year.
Excessive testing will cause the life of the
alarm to be shortened.
Test/Reset button feature
• Test the sounder, batteries and circuitry.
• Allow you to test the sensor by
introducing a source of CO into the
detector (see ‘Testing the sensor’
below).
• Silence the loud 85dB sounder during
an alarm (only possible when current
CO level is less than 50ppm).
Step 1
Step 3
and
cuitry by
et button
detector
r should
pressed,
ate red,
king and
r to the
batteries
weekly.
Step 1
If the detector is wall or ceiling
mounted unhook the detector
from the screws.
out the match and place it into
a dish of water.
Step 4
Step 2
Test/Reset
Button
uld only
dult. This
e a year.
fe of the
in order
icks.
.
Step 3
Cover the sounder vents with
one hand. Press and hold the
Test/Reset button down with
your thumb/finger until the
Power LED illuminates green
and the sounder sounds for a
second time (this should
happen after around 5
seconds). Release the Test/
Reset button. Upon releasing
the Test/Reset button the Power
LED will flash green once every
second. This indicates that the
sampling rate of the detector
has increased and can be
tested using a known source of
CO.
Light an incense stick using
a match or lighter. Be sure to
blow out the flame so that the
incense stick is smouldering.
Extinguish the lighter, or put
15cm
(6”)
Turn the detector on its side
so that the vents on the right
hand side of the detector are
pointing downwards (see
diagram opposite). Hold the
burning incense stick around
15cm (6 inches) below the
detector, so that the smoke
enters the vents on the side
of the detector. An increase in
the localised carbon monoxide
11
level within the sensor to
more than 50ppm will cause
the sounder to sound for one
cycle of four loud beeps and
the Power LED to illuminate
green for a short time. This is
the end of the test. The Power
LED will no longer flash green
every second but will revert
to flashing once every minute
as the detector will go back
to normal operating mode (It
may take up to two minutes
of exposure to the smoke for
the localised level of carbon
monoxide within the sensor to
reach over 50ppm). Now move
the source of CO away from the
detector as the test is finished.
Step 5 After step 4, put out the
incense stick by placing it into
a dish of water. Ensure that all
flames have been extinguished.
NOTE: If the localised carbon monoxide
level within the sensor does not reach
50ppm during the test, the sensor test will
stop automatically after 3 minutes.
UNDERSTANDING
THE PRODUCT’S
INDICATORS
The higher the concentration of carbon
monoxide detected by the detector, the
quicker it will respond. When sufficient
carbon monoxide is detected a loud
audible signal (85 dB at 1m/3 feet) will be
emitted and the Alarm LED will flash red
once every second.
The alarm will sound:
• Between 60 and 90 minutes when
exposed to 50ppm of CO.
• Between 10 and 40 minutes when
exposed to 100ppm of CO.
• Within 3 minutes when exposed to
300ppm or more of CO.
Fault / End of Life signal:
The unit continuously checks the settings
of its sensor and circuitry. If any of these
settings are found to be incorrect or if the
batteries become low then the detector
will emit a single audible chirp once per
minute for up to 30 days. IMPORTANT:
This does NOT mean that the detector has
detected carbon monoxide.
Replace batteries immediately. If the
product continues to chirp despite having
new batteries and the product is still within
warranty then contact Technical Support
for advice. If the product is no longer in
warranty replace it immediately!
12
M
YO
Your det
hazardou
home w
maintain
order, a
last for
recomm
• Test th
of yo
pressi
button
• Perfor
• Keep
vacuu
attach
To preve
the sen
affecting
• Never
detect
damp
• Do no
• Do no
detect
• Do no
near t
• If inst
mayb
may n
that co
NG
S
carbon
ctor, the
ufficient
a loud
) will be
flash red
en
en
d to
settings
of these
or if the
detector
once per
RTANT:
ctor has
If the
e having
ill within
Support
onger in
MAINTAINING /
TESTING
YOUR DETECTOR
Your detector will alert you to potentially
hazardous CO concentrations in your
home when maintained properly. To
maintain your detector in proper working
order, and to ensure that the sensor will
last for the lifetime of the product, it is
recommended that you:
• Test the sounder, batteries and circuitry
of your detector once per week by
pressing and holding the Test/Reset
button for 1 second.
• Perform the sensor test annually.
• Keep the detector free of dust by gently
vacuuming the case with a soft brush
attachment every 3 months.
To prevent the possibility of contaminating
the sensor in your detector and thus
affecting its reliability:
• Never use cleaning solutions on your
detector. Simply wipe with a slightly
damp cloth.
• Do not paint the detector.
• Do not spray aerosols on or near the
detector.
• Do not use any solvent based products
near the detector.
• If installing in a caravan or boat there
maybe other substances present, that
may not normally be found in the home,
that could affect the reliability of the CO
alarm. Avoid using the following in close
proximity to the alarm; oils, cleaning
fluids, polishes, paints and greases.
• Do not attempt to repair your CO
detector. Do not remove any screws or
open the main casing of your detector.
Any attempt to do so may cause
malfunction and will invalidate the
warranty.
WHAT TO DO IN THE
EVENT OF AN ALARM
WARNING: A loud alarm is a warning that
unusually high and potentially lethal levels
of carbon monoxide are present. Never
ignore this alarm, further exposure can
be fatal. Immediately check residents for
symptoms of carbon monoxide poisoning,
and contact the proper authorities to
resolve all CO problems. NEVER IGNORE
ANY ALARM.
What to do during an alarm:
• K
eep calm and open the doors and
windows to ventilate the property.
• Stop using all fuel-burning appliances
and ensure, if possible, that they are
turned off.
• Evacuate the property leaving the doors
and windows open.
• Ring your gas or other fuel supplier
on their emergency number; keep the
number in a prominent place.
13
Write your fuel supplier’s emergency
number here:
Temperature Range:-10ºC (14ºF) to 40ºC
(104ºF)
Operating Humidity Range: 30 - 90% RH
• Do not re-enter the property until the
alarm has stopped. When exposed to
fresh air it can take up to 10 minutes
for the sensor to clear and the alarm to
stop depending on the level of carbon
monoxide detected.
• Get medical help immediately for
anyone suffering the effects of carbon
monoxide poisoning (headache,
nausea), and advise that carbon
monoxide poisoning is suspected.
• Do not use the appliance again until it
has been checked by an expert. In the
case of gas appliances the engineer
must be registered on the Gas Safe
register.
TECHNICAL
INFORMATION
Detector Specifications: Model CO-9B
Sensor Type: Electrochemical
Sensor Life: 7 Years
Alarm Sound Level: 85dB at 1m/3 feet
Recommended Batteries: Size AA
Alkaline, Duracell LR6, Energizer, LR6,
Gold Peak 15A
Battery Life: Exceeds 1 year under
normal operating conditions, replaceable
14
Weight
(4.4oz)
(inc.
batteries):
125 grams
Certified to: EN 50291-1,2: 2010
This carbon monoxide alarm is designed
to continuously monitor for CO. Its
response times meet the requirements of
the European standard EN 50291-1: 2010
and EN 50291-2: 2010.
WARNING: Apparatus conforming to
this standard may not protect people who
are at special risk from carbon monoxide
exposure by reason of age, pregnancy or
medical condition. If in doubt, consult your
doctor.
A carbon monoxide detector is not
substitute for a smoke alarm or a
combustible gas detector.
Replace unit after 7 years of operation.
DISPOSAL
Waste electrical products should not be disposed of
with regular household waste. Please recycle where
facilities exist. Check with your local authority, retailer
or Technical Support for recycling/disposal advice as
regional variations apply.
The batteries should be removed before disposal
of the detector. Both the batteries and the detector
should be disposed of in line with current regulations.
WARNING: DO NOT ATTEMPT TO OPEN - DO NOT
BURN.
Warranty
Sprue Saf
purchaser
detector b
workmans
service for
of purchas
Provided
products
Safety Pro
the 7 (se
date of pu
discretion,
The warra
Carbon M
the remain
in respect
is from th
the date of
Safety Pro
alternative
the origina
This warra
from the d
transferab
Warranty
This warr
from accid
of reasona
not in acc
cover even
Products
severe we
service ce
Safety Pro
to this w
Products L
consequen
expressed
prohibited
merchanta
limited in d
to 40ºC
90% RH
grams
designed
CO. Its
ments of
1-1: 2010
ming to
ple who
onoxide
nancy or
sult your
m
is not
or a
tion.
isposed of
ycle where
ity, retailer
advice as
e disposal
e detector
egulations.
- DO NOT
WARRANTY
Warranty coverage
Sprue Safety Products Ltd warrants to the original
purchaser that its enclosed sealed carbon monoxide
detector be free from defects in materials and
workmanship under normal residential use and
service for a period of 7 (seven) years from the date
of purchase.
This warranty does not affect your statutory rights.
Except for death or personal injury, Sprue Safety
Products Ltd shall not be liable for any loss of use,
damage, cost or expense relating to this product
or for any indirect, or consequential loss, damages
or costs incurred by you or any other user of this
product.
The warranty does not cover the batteries which are
considered user-replaceable parts.
Provided product is sent back to Sprue Safety
products with proof and date of purchase, Sprue
Safety Products Ltd hereby warrants that during
the 7 (seven) year period commencing from the
date of purchase Sprue Safety Products Ltd, at its
discretion, agrees to replace the unit free of charge.
The warranty on any replacement FireAngel CO-9B
Carbon Monoxide Poisonous Gas Alarm will last for
the remainder of the period of the original warranty
in respect of the detector originally purchased – that
is from the date of original purchase and not from
the date of receipt of the replacement product. Sprue
Safety Products Ltd reserves the right to offer an
alternative product similar to that being replaced if
the original model is no longer available or in stock.
This warranty applies to the original retail purchaser
from the date of original retail purchase and is not
transferable. Proof of purchase is required.
Warranty disclaimers
This warranty does not cover damage resulting
from accident, misuse, disassembly, abuse or lack
of reasonable care of the product, or applications
not in accordance with the user manual. It does not
cover events and conditions outside of Sprue Safety
Products Ltd’s control, such as Acts of God (fire,
severe weather etc). It does not apply to retail stores,
service centres or any distributors or agents. Sprue
Safety Products Ltd will not recognise any changes
to this warranty by third parties. Sprue Safety
Products Ltd shall not be liable for any incidental or
consequential damages caused by the breach of any
expressed or implied warranty. Except to the extent
prohibited by applicable law, any implied warranty of
merchantability or fitness for a particular purpose is
limited in duration to 7 (seven) years.
15
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement