- No category
advertisement
Control Panel
XTIP
P R O D U C T S P E C I F I C A T I O N S S H E E T
Made by RSI VIDEO TECHNOLOGIES 2202-XTIPSP February 2012
Description
The XTIP control panel is a wireless, battery operated, hybrid alarm system. It is designed for residential, small business security applications, as well as both indoor and outdoor commercial applications (construction sites, cell towers, remote sites, substations...) where the location of the panel has
Ethernet (IP) or GPRS connection.
The panel includes the choice of many different configuration options including the following:
> Arming by Videofied Peripherals, Schedule, Virtual Keypad,
or exisiting alarm system.
> Power the system by Power Supply + Battery Backup or
standalone battery (up to 4 years).
> Communicate over Ethernet + Cellular Backup, Ethernet Only,
or Cellular Only.
> 24 wireless zones for Videofied Peripherals plus 3
Programmable input zones for hardwired devices.
> Choose between the Internal RF antenna or switch to an
External RF antenna option.
> 2 Hardwired outputs.
> Virtual Keypad arming and disarming from Smartphone.
Supervised Wireless Technology
The XTIP, along with all Videofied devices, utilize patented
S2View® - Spread Spectrum, AES Encrypted Wireless technology, providing optimum signal integrity and security.
Bi-directional RF communication paths between all system devices and the system control panel assure high signal reliability. Integrated RF and GPRS conntections allow for addition of external antennas for increased performance.
The panel supervises every device (excluding the remote keyfob) to validate current open/close state, tamper condition, serial number, date of manufacture, firmware revision, and battery status.
Security
With two modes of transmission, Ethernet and GPRS, the XTIP panel ensures maximum safety. In case of Ethernet connection loss, the XTIP panel will switch to GPRS (if enabled) to transmit alarms and videos.
* When using the XTIP panel with the Ethernet connection or SMS Arming you must use a 12v 2A Power Supply with 4 Alkaline battery backup (PP4)*
www.videofied.com
Control Panel Videofied XTIP
Compatibility The XTIP works with all the following Videofied wireless devices:
Indoor MotionViewer - integrated PIR motion detector, night vision digital camera, infrared illuminators.
MotionViewers detect intruders and capture a 10 second video of the intrusion which is sent to the panel over RF.
Outdoor Badge Reader with
Prox-Tag - Allowing Arming/ disarming of the system from outside the premices. The
Prox-Tags are standard Mifare badges.
Door Contacts - detect door and window open/close activity.
An external input allows a wired connection from standard security switches and detection devices outputs.
Outdoor MotionViewer
- integrated PIR motion detector, night vision digital camera, infrared illuminators.
MotionViewers detect intruders and capture a 10 second video of the intrusion which is sent to the panel over RF.
Interior Sirens - provide status beeps and alarm sounds throughout the premises where needed.
Exterior Sirens/Strobes - provide alarm sounds and visual identification of alarm site for responding authorities.
Smoke Sensor - enhances protection and uses advanced detection technology. The
Smoke Sensor is totally wireless and an integrated addition the whole security system.
Remote Keyfobs - allow limited system operation and panic alarm capability in a portable, convenient package.
Features
> Video Verification - video resolution of 320 x 240 pixels, 0 lux > 2 dedicated on-board connectors to extend the GPRS
sensitivity, 5-frames per second for approx. 10 seconds total coverage and the radio coverage
recording time. 220K MPEG file. > 4 Areas with 2 special arming mode and partitions
> Up to 25 Wireless zones/devices > 20 user codes or Badges
> Mapping feature to trigger a video upon activation of a > 4.000 Events history log
programmable input > Power : 12VDC with Alkaline batteries for back-up (up to one
> 3 programmable inputs month of back-up)
> 2 programmable outputs to activate third party devices on > Built-in RJ45 for Ethernet transmission to report to your
site (smoke cloak, gates, strobes, sirens, etc...) Monitoring Station in the Frontel protocol
> Built-in GPRS transmitter to report to your Monitoring Station
in the Frontel protocol www.videofied.com
Control Panel
XTIP P R O D U C T S P E C I F I C A T I O N S H E E T
Electrical Data
Power Requirements (Option 1) Must be used when using
Ethernet Communication or SMS- 12v DC / 2A
Back up
Battery life (estimated)
4 Alkaline 1.5v DCell, LR20
Up to 1 year
Power Requirements (Option 2) - Will not work with Ethernet or SMS- 4 SAFT LSH20 Batteries
Battery life
RF technology
Radio type
Operating frequency
Up to 4 years
S2View ®
Spread Spectrum Bidirectional
915 MHz. (US)
Transmission security
Supervision
AES encryption algorithm
Panel polls devices every 8 minutes
Antennas Integrated
Tamper detection Base and Cover Tamper
Operating temperature
Maximum relative humidity
32° - +104° F
95%, non-condensing
UL listings 1023 (applied for)
Wired Arming Inputs 2
Dry Contact option
Inputs Voltage
Yes
2VDC (15v max)
Inputs Current 2 mA max
Programmable Wired Inputs 3
Dry Contact
Inputs voltage
Programmable Wired Outputs
Max switching voltage
Yes
12VDC (15v max)
2
220VDC / 250VAC
Max switching current
Max switching power
Programming
Devices per system
Access Codes
Security Levels
Arming modes
Areas
4A
120VA
Alphanumeric Keypads or Frontel Installer Software
24 per system + 1
19 maximum + 1
4 (area1 predefined from factory entry/exit delayed. Areas 2,3 & 4 programmable)
3
2
Communication Formats
Protocols
Installer Codes
Special arming modes
Communication Formats
Communicator type
IP Stack
Remote Maintenance
Video Transmission
Video Format
Video file size
Video Framing
Image format
Image Resolution
History/Event Log
Physical Data
Installation/Mounting
GPRS / Ethernet
Frontel Only
One (for system programming only
4 (Area 1 predefined
IP
GPRS and Ethernet
IP, TCP/IP
Frontel Installer Protocol only
By Frontel protocol to
Central Monitoring Station
MPEG video file
220 Kbytes
5 frames/second
JPEG
320x240 Pixels
4,000 Stored events
Material ABS-ULVO
Dimensions (LxWxD) 9” x 7”x 2-1/16”
Control Panel/Base Two srews secures control panel cover to base. Three screws
secure control panel base to wall
External Antenna 2 Built in MMCX connectors to
extend the GPRS and RF range www.videofied.com
Control Panel
XTIP P R O D U C T S P E C I F I C A T I O N S H E E T
FCC Regulatory Information for USA and CANADA
FCC Part 15.21 Changes or modifications made to this equipment not expressly approved by RSI VideoTechnologies may void the FCC authorization to operate this equipment.
FCC Part 15.105 Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radio frequency radiation exposure information according 2.1091 / 2.1093 / OET bulletin 65
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
EMEA SALES
23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
Hotline: +33 (0)820 846 620
Fax: +33 (0)1 82 69 80 10
USA SALES
1375 Willow Lake Blvd. #103
Vadnais Heights, MN 55110
USA
Hotline: +1 877 206 5800
Fax: +1 651 762 4693 www.videofied.com
© 2011 RSI VIDEO TECHNOLOGIES. VIDEOFIED ® is a Registered Trademark of RSI VIDEO TECHNOLOGIES.
S 2 View ® is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project