Gossen MetraWatt SECULIFE HIT AM Quick Setup Guide

Gossen MetraWatt SECULIFE HIT AM multimeter offers advanced features for precise measurements in medical technology. With 23 multimeter functions, it handles voltage, current (100 nA to 16 A), capacitance, resistance, diode testing, and more. Its TRMS AC and AC+DC measurement capabilities ensure accurate readings, while the 1 kHz low-pass filter reduces noise. Store over 15,000 measured values and transfer data via the bidirectional infrared interface or optional IR-USB adapter.

PDF Download
Document
Gossen MetraWatt SECULIFE HIT AM Quick Setup Guide | Manualzz

Advertisement

Advertisement

Advertisement

Frequently asked questions

It offers a wide range of functions, including voltage measurement, auto-ranging current measurement, capacitance and resistance measurement, diode and continuity testing, and data storage for over 15,000 measured values.

It features IP 52 protection against dust and water, automatic blocking sockets (ABS), and separate battery and fuse compartments, ensuring safe operation in various environments.

Voltage measurement involves turning the rotary switch to V= or V~ and connecting the measurement cables accordingly. The multimeter automatically switches to the mV measuring range when the measured value is below 90 mV.

Alternating voltage measurement with a 1 MΩ load resistance and frequency measurement with a selectable low-pass filter require setting the rotary switch to V~1MΩ or 1kHz and connecting the measurement cables appropriately.

To perform continuity testing, disconnect the supply power, set the rotary switch to the speaker sign, and connect the conductor path under test as indicated in the manual.

For temperature measurement with thermocouples, set the rotary switch to TempTC, connect the sensor to the accessible jacks, and the instrument will display the measured temperature in the selected unit of measure.
ALP:
Preparing document for printing…
0%