TAbLE oF ConTEnTs Ball Valves

TAbLE oF ConTEnTs Ball Valves
A history of
Quality, Service
and Innovation
Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for
U.S. and international markets. The company’s headquarters is based in Matthews, North Carolina with
manufacturing plants and foundries located in Pageland and Conway, South Carolina.
Conbraco has a history of new product development and innovation that dates back to the company’s
inception in 1928. Today, the Conbraco line of products is marketed under the “Apollo Valves” brand
and includes: ball valves, butterfly valves, backflow prevention devices, water pressure reducing valves,
mixing valves, safety relief valves, water gauges, strainers, actuation and ApolloXpress products.
Conbraco’s vertically integrated manufacturing ensures a consistency of production, testing, quality
and availability. You can be assured that Conbraco flow control products will deliver long term
reliability. All Conbraco plants are registered to ISO 9001:2008 quality standards.
The Conbraco line continues to expand with new products, designs and advanced materials to
better serve the needs of our customers. Markets served include: chemical processing, pulp and
paper, petroleum, residential and commercial plumbing and heating, OEM, irrigation, water works, and
fire protection.
Throughout this catalog, products that have a Lead
Free* option will be identified with this logo.
* LEAD FREE: The wetted surfaces of this product shall
contain no more than 0.25% lead by
weighted average. Complies with CA
AB1953, VT Act 193, MD HB372, LA
HB471 and Federal Public Law 111-380.
**Any imported products are clearly
identified as “Apollo International”.
Drawings also available for LEAD FREE models.
all products brochure
Table of Contents
Ball Valves
Standard Ball Valves.............................................................................................................................. Pages 4-6
Three Piece Ball Valves.............................................................................................................................. Page 6
Apollo® ARTM Ball Valves........................................................................................................................... Page 7
Heavy Duty Apollo Ball Valves.......................................................................................................... Pages 7-8
Specialty Valves........................................................................................................................................... Page 8
Apollo International Ball Valves............................................................................................................ Page 8
Top Entry Apollo Ball Valves.................................................................................................................... Page 9
Actuators............................................................................................................................................................... Page 10
Butterfly Valves................................................................................................................................................ Page 10
Backflow Preventers............................................................................................................................... Pages 11-13
Vacuum Breakers............................................................................................................................................. Page 13
Water Pressure Control & Reducing Valves..................................................................................... Page 14
Mixing Valves............................................................................................................................................... Pages 14-15
Safety & Relief Valves............................................................................................................................ Pages 15-17
Wye Strainers & Apollo International Strainers.......................................................................... Page 18
Water Gauges..................................................................................................................................................... Page 19
Boiler Drains........................................................................................................................................................ Page 19
Air & Gas Cocks................................................................................................................................................... Page 20
Expansion Tanks............................................................................................................................................... Page 21
Specialty Valves................................................................................................................................................ Page 21
Gates, Globes & Check Valves............................................................................................................ Pages 21-22
Warranty Information.................................................................................................................................. Page 23
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
3
all products brochure
Standard Ball Valves
Ratings
Bronze Valves:
600 psig CWP, Non-shock.
(Exceptions: 3-way and bronze Saturn valves) 150 SWP.
Stainless Steel Valves (76 & 96 series):
1/4” through 1”: 2000 psig CWP
1-1/4” through 2”: 1500 psig CWP
2-1/2” and 3”: 1000 psig CWP (76 Series only)
Carbon Steel Valves (73A, 89, 92 & 93 series):
1/4” through 1”: 2000 psig CWP
1/4” through 2”: 1500 psig CWP, Non-shock
2-1/2” and 3”: 1000 psig (89 Series only)
7K Series
Auto Draining; bronze full port ball valve
with 1/4” NPT tap for drain. Available with
lock-closed-only lever. Sizes: 1/4” to 2-1/2”.
32 Series
Standard port economy bronze ball valve.
Blow-out proof stem design. Adjustable
packing gland. 400 psig CWP, cold nonshock. 125 psig saturated steam. Vacuum
service to 29”Hg. Sizes 1/4” to 2”. Available
with solder and threaded ends.
70-HC/70LF-HC Series
Cap & chain valve with 3/4 inch hose
connection heavy brass cap and reverse
handle. Ideally suited for direct connections
to hoses, valve features a securely attached
cover with chain which prevents damage to
hose threads. -200 model designed for soft
soldering into lines without disassembly.
73A Series
Forged carbon steel construction, standard
port design 2000 CWP to 1”. 1500 CWP 1-1/4”
to 2”. With actuator mounting pads and
raised handle stops. NACE compliant with SS
trim. Sizes 1/4” to 2”.
4
72 Series:
3000 psig CWP
Standard Ball Valve Design Features
• Steel or 304 stainless steel handle with hole for tagging.
• Blow-out resistant stem.
• Body: Bronze, stainless steel, carbon steel, Alloy 20 and nickel.
• RPTFE seats and seals, stuffing box ring and seal washer.
• 71-AR, 76-AR, 77-AR, 77C-100, 77C-200, 77CLF-100, 77CLF-200,
77D-14X, 77W, 77WLF and 89-AR have MPTFE as standard
Note: Seat material determines practical working pressures.
Pressures referenced are body ratings.
9A/90 Series
Saturn® bronze one piece ball valve; UL listed
300 psig (9A rated 600 psig CWP); threaded
ends. For fuel, inert gas, flammable liquids;
“tee” or lever handles. 90 Series sizes 1/2” to
2”, 9A sizes 1/4” to 2”.
70/70LF Series
Standard port threaded bronze ball valve.
This Apollo valve is the most widely used
and trusted bronze ball valve in the industry.
It features blowout-proof stem, RPTFE
seats and stuffing box ring and chromiumplated ball.
71 Series
Bronze ball valve with mounting pad; spring
return handle available as model 71-500.
Sizes: 1/4” to 3”.
74 Series
Chemical resistant nickel ball valve, blow-out
resistant stem, stainless steel ever and nut
and precision investment cast components.
Sizes: 1/2” to 2”.
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Standard Ball Valves
75 Series
Bronze padlockable ball valve; rated 600 psig
CWP; stainless steel lever and nut optional.
Automatic drain available. Sizes 1/4” to 2”.
76-300/400 Series
Stainless steel ball valve with double union
ends; blow-out proof stem, all wetted
metallic parts are 316 stainless steel. RPTFE
seats and seals, adjustable packing gland
and stainless steel lever and nut. Sizes 1/2”
to 2”.
77 Series
Bronze full port ball valve with mounting
pad; designed for easy actuator mounting.
Sizes 1/4” through 2-1/2”. Available in NPT
and SAE threads.
77W/77WLF Series
ApolloXpressTM ball valves are designed for
direct mechanical connection to copper
tubing in sizes 1/2”-2”. The 77W complies
with ANSI/NSF 61 Section 8 and is ideal for
plumbing and heating systems. The press
connections ensure easy installation with
standard crimping tools. Rated 250 CWP,
now with Leak Before PressTM feature.
90 Series
Compact bronze uni-body ball valve that’s
UL listed at 400 psig CWP for fuel gases and
flammable liquids. Also ideal for general
purpose applications. Sizes 1/2” to 2”.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
76 Series
Stainless steel standard ball valve; investment cast
components. 2,000 CWP to 1”, 1,000 CWP 1-1/2”
to 3”. Sizes: 1/4” to 3”. 76-600 Series - Stainless
steel 3-way diversion ball valve; 800 psig WOG,
investment cast components.
76F-A Series
Economy stainless steel full port valve,
1000# CWP rating. Threaded ends, blowout
proof stem, investment cast body, 316 SS
components, including stainless handle.
RPTFE seats and long life MPTFE packing.
Sizes 1/4” to 2”.
77C/77CLF Series
Full port “Contractor Series” bronze ball valve
with solid chrome-plated ball for superior
flow characteristics. U.S. made cast bronze
body and retainer. NPT and ANSI B16.18
solder end connections available. Sizes 1/4”
to 2-1/2”.
89 Series
Carbon steel ball valve with threaded ends;
1500 and 2000 psig CWP; easy actuator
mounting. Sizes 1/4” to 3”. (Actuator Ready
version: 89-ARX-64)
92-100 Series
Compact Saturn® bar stock steel unibody
ball valve. Certified fire safe with graphite
packing; RPTFE seats and seals, blowoutproof stem design. Sizes 1/4” to 2”.
5
all products brochure
Standard Ball Valves (cont’d)
93 Series
Saturn® carbon steel unibody ball valve; CWP
rated 1500 to 2000 psig, cold, non-shock.
Optionally meets API 607 fourth edition fire
safe standards. Sizes 1/4” to 2”.
95/95LF Series
Bronze stop and drain ball valve; 400 psig CWP
rating; threaded or solder ends; many handle
options available. Sizes 1/2”, 3/4” and 1”.
96 Series
Saturn® stainless steel unibody ball valve;
CWP rated 1500 to 2000 psig; optionally
meets API 607 fourth edition fire safe design
standards; available with “tee”, round, and
cam lock handles.
Three Piece Ball Valves
82/82LF Series
Bronze three piece full port ball valve; rated
600 psig CWP; threaded, solder and brazed
tube ends. In-line maintenance. Sizes 1/4”
through 4”.
83B Series
Carbon steel, full port three piece ball valve. Class
600 (all sizes): stainless ball & stem, ASME B16.34,
ISO 5211 mounting pad, enclosed B8M fasteners,
stainless topworks, multi-piece V-ring packing.
Gland plate style packing adjustment, static
grounding, spiral gaskets and lockable. Available
with threaded, socket weld and butt weld ends.
Sizes 3/8” to 2”. Numerous options including
live-loading or tested to API 607 5th edition.
83A Series
Carbon steel, full port three piece ball
valve. 1500 psig CWP; stainless ball and
stem, ISO 5211 mounting pad, stainless
enclosed fasteners and topworks. Multi-piece
V-ring packing, gland plate style packing
adjustment and lockable. Available with
threaded, socket weld and butt weld ends.
Sizes 3/8” to 2”. Limited options.
86A Series
Stainless steel, full port three piece ball valve.
1500 psig CWP, ISO 5211 mounting pad,
enclosed fasteners, multi-piece V-ring packing,
gland plate style packing adjustment and
lockable. Available with threaded, socket
weld and butt weld ends. Sizes 3/8” to 2”.
Limited options.
86B Series
Stainless steel, full port three piece ball valve.
Class 600; ASME B16.34, (all sizes), ISO 5211
mounting pad, enclosed B8M fasteners,
stainless topworks, multi-piece V-ring packing.
Gland plate style packing adjustment, static
grounding, spiral gaskets and lockable. Available
with threaded, socket weld and butt weld ends.
Sizes 3/8” to 2”. Numerous options including
live-loading or tested to API 607 5th edition.
6
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Apollo® ARTM Ball Valves
Apollo AR™ Ball Valve Ratings
Apollo AR actuator ready ball valves feature an ISO 5211-style mounting
pad with no handle to throw away. They are made for high cycle
applications, and like all Apollo valves, the bodies are cast to the highest
metallurgical standards for long service life.
71-AR Series
Bronze standard port ball valve with
threaded ends, ISO mounting pad, and
advanced live loaded packing design. Latch
lock handle available. Sizes 3/4” to 3”.
They are available in stainless steel, carbon steel and bronze. They
feature a live loaded multi-stacked “V”-ring stem packing. All models
come standard with a stainless steel ball and stem, and multifill seats,
seals and packing rated up to 2000 psig or to 450°F, or to 250 psig
saturated steam. (Bronze rated to 600 psig.)
76-AR Series
Stainless steel standard port ball valve.
Investment cast components; ISO mounting
pad and advanced live loaded packing
design. Latch lock handle available. Sizes
1/4” to 3”.
77D Series
Full port bronze ball valve with an integral
ISO 5211 mounting pad. Double o-ring stem
seal and MPTFE seats and bearings. Sizes
1/2” to 2” with standard stainless steel ball
and stem.
77-AR Series
Bronze full port ball valve with threaded
ends. ISO mounting pad and advanced live
loaded packing design. Latch lock handle
available. Sizes 1/4” to 2”.
89-AR Series
Carbon steel standard port ball valve.
Investment cast components, ISO mounting
pad and advanced live loaded packing
design. Latch lock handle available. Sizes
1/4” to 3”.
Heavy Duty Apollo Ball Valves
•
•
•
•
•
•
•
Blow-out proof stem
Field repairable
RPTFE seats and stuffing box rings
Meets WW-V-35C federal standards
Fire safe designs available
Expanded pressure ranges
High performance alloys
72 Series
Carbon steel high pressure ball valve. Rated
3000 psig. Sizes 1/4” to 2”. Pressure is body
rating.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
87A Series
Stainless steel Class 150 and 300 flanged
valve. Regular or full port, ISO 5211 actuator
mounting pad. Sizes 1/2” to 12”
7
all products brochure
Heavy Duty Apollo Ball Valves (cont’d)
88A Series
Carbon steel Class 150 and 300 flanged
valve. Regular or full port; ISO 5211 actuator
mounting pad. Sizes 1/2” to 12”.
Specialty Valves
399/87A-400/401R
Alloy 20 two piece, three piece, and Class
150 flanged ball valves. Reinforced seats
and seals; many other options available. Two
piece sizes 1/4” to 2”. Three piece sizes 1/2”-2”.
Flanged sizes 1/2” to 4”.
7K & 77K SV
Full port bronze secure vent valves. Ideal
for automatic venting of compressed air for
powering tools and equipment when the
valve is in the closed position. Live loaded
seats on upstream side. Available in 1/4” - 2”
size with a variety of handles.
Apollo International Ball Valves
64 Series
Apollo International forged brass full
port ball valve. An economical valve that
is available in 1/4”-4” NPT and 1/2”-4” in
sweat connections. Rated at 600 psig cold
working pressure. Meets ANSI/NSF 61-8 and
numerous gas listings.
94A/94ALF Series
Apollo International forged brass full port ball
valve in thread and sweat connections. An
economical valve that is available in 1/4” to
4” in NPT and 1/2” to 4” in sweat connections.
Rated at 600 psig cold working pressure
1/4”-2” and 400 psig 2-1/2”-4”. Meets ANSI/
NSF 61-8 and numerous gas listings.
64WC Series
Apollo International Apollo-Press ball valve
with brass body. Available in 2-1/2” to 4”
sizes compatible with XLC press tool jaw
sets. Ideal for installation in plumbing and
heating systems. Rated 200 CWP.
95A Series
Apollo International forged brass full port
stop and waste ball valve. Available in
threaded and sweat connections and rated
at 600 psig. This valve features a side drain
ideal for plumbing or hydronic heating
systems.
IBV-125 Series
Apollo International flanged cast iron ball
valves can be used to replace any IBBM
dimension gate valve or plug valve to give
the convenience of quarter turn operation.
Sizes 2”-10” rated at 125 WSP and 250 CWP.
Also available with FDA approved epoxy
coating.
8
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Top Entry Apollo Ball Valves
•
•
•
•
•
•
•
•
•
Sizes 1/2” to 12”
Temperatures - 150°F to +1,000°F
ANSI Pressure Class 150, 300, 600
16 seating materials, four different configurations
High strength encapsulated metal seat holders
11 body materials
11 ball and stem materials
Six end configurations
Standard bonnets, extended bonnets and fugitive emissions
bonnets - all interchangeable
Flanged Series
In 150, 300 and 600 ANSI Class. Materials:
Alloy 20, carbon steel, Hastelloy C, M35-1,
nickel, stainless steel, titanium and others
upon request. Sizes 1/2” to 10”.
Butt Weld Series
Available in ANSI Class 300 to 8” and Class
600 to 6” size. Schedule 10, 40 and some 80
pipe ends offered. A full range of body, seat
and seal materials are available.
NPT and Socket Weld Series
Available in 300 ANSI Class sizes 1/2” to 3”;
and 600 ANSI Class 1/2” to 2”. Materials: Alloy
20, carbon steel, astelloy C, M35-1, nickel,
stainless steel, titanium and others upon
request. Full port available in 300 ANSI class
sizes 1/2” to 2” and 600 ANSI class sizes 1/2”
to 1-1/2”.
Steam Jacketed Top Entry Valves
Apollo Top Entry ball valves are ideally
suited for jacketed applications. The top
entry concept allows for continued access
to stem packing and valve internals for ease
of maintenance without disturbing the
jacket itself or removing the valve from the
pipeline.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
9
all products brochure
Apollo Pneumatic Actuators
Apollo actuators feature ISO 5211 interface dimensions and NAMUR
solenoid and accessory interface dimensions. Apollo also supplies
pre-engineered stainless steel valve/actuator mounting kits for all
Apollo valves equipped for automation. Available in 13 sizes to
complement torque requirements, with both spring
return and double acting versions available.
Spring return torque ratings at 80 psig are from
39-41, 341 lb-in. Double acting torque ratings at
80 psig range from 59 - 60, 623 lb-in.
Apollo “AcuTorque”
Apollo AcuTorque actuator is manufactured
with an integral internal air manifold. Valve
interface dimensions are ISO 5211 standard.
The solenoid mounting pad and slotted shaft
are manufactured to NAMUR dimensional
standards. For applications not requiring
a direct mount solenoid valve, ports NPT
threaded. Investment cast steel body and
unique drive pinion make the AcuTorque
an excellent choice for tough applications.
Torque outputs from 21 to 20, 929 lb-in.
Apollo Electric Actuators
AE Series
Electric actuators; torque output 200 to
1,000 lb-in, NEMA 4 & 4X (water tight and
corrosion resistant) enclosures. Thru shaft
manual override. Reversing motors in 24,
115, 220 VAC and 12 and 24 VDC. CSA listed.
CS/CL Series
Industrial quality reversing motor design
electric actuator. Operating torques from 150
to 3,000 lb-in; AC and DC motors, extended
duty cycles; NEMA 4 and 7 enclosures.
LB Series
Electric actuators; torque output: 300 to
54,000 lb-in; on/off or modulating control
available. 115 VAC 50/60 Hz single phase.
220/440 VAC - 50/60 Hz three phase
Apollo International Butterfly Valves
LD/WD 141
General purpose/economy ductile iron design
for use in industrial and HVAC/mechanical
markets. The WD141 Model is a wafer style
valve; the LD141 Model is a companion lug.
Both are rated at 200 psig bubble-tight shut off
between flanges. LD/WD 141 Series meet MSS
SP-67 and API 609 specifications. Lug sizes 2” to
24”. Wafer sizes 2” to 12”.
10
LC149
The Apollo® LC149 Contractor Grade
Series Cast Iron Butterfly Valves are ideal
for use in Industrial and HVAC/Mechanical
applications. The LC149 Series is a lug style
valve designed to be economical yet have
high pressure capabilities. Features bronze
disc and EPDM seats. Lug sizes 2” to 12”.
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Backflow Preventers
4A-100 Series Model DC-4A
Bronze body double check assembly with
top access check valves and test cocks.
Features captured spring cartridges and
Apollo ball valve shutoffs with stainless steel
trim. Contact local representative or factory
for approvals. Sizes 1/2”-2”.
4SG-100 Model DC-4SG
Double Check Valves in sizes 2-1/2”-8”. (10”DC4S) Light weight, short lay length, low
head loss, with individual access to the
check valves. FDA approved epoxy-coated
ductile iron. Available shut-offs: monitored
butterfly valves with supervisory switch,
OS&Y and NRS gate valves. Horizontal and
vertical installation approvals.
4N-300 Series Model DUC4N
Bronze body dual check with two captured
spring cartridges. ASSE and CSA approved for
residential backflow protection at the water
meter. Multiple connection combinations.
Sizes 3/8”-1”.
40-400 Series Model DCAP
Bronze body dual check with atmospheric
port. Noryl® poppets and stainless steel
springs. ASSE and CSA approvals. Sizes: 1/2”
and 3/4”.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
4A-200 Series Model RP-4A
Bronze body reduced pressure backflow
assembly with top access check valves
and test cocks. Features captured spring
cartridges and Apollo ball valve shutoffs with
stainless steel handles and trim. Contact
local representative or factory for approvals.
Sizes 1/2”-2”.
40-200 Series Model RP-40
Sizes 2-1/2” to 10”. Fusion epoxy coated
ductile iron body; 85-5-5-5 replacement
seats and stainless steel springs. Full USCFCCC&HR, AWWA, ASSE, CSA, and FM
approvals and IAPMO listed. UL classified.
Model DUC-4FP
Bronze body dual check with two captured
spring cartridges. ASSE, CSA approved and
UL classified for residential fire sprinkler
systems. Sizes 1”, 1-1/4”.
4A-100 Series Model DC-4A
Double Check Valves in sizes 2-1/2”12”. Stainless steel bodies 2-1/2”-8”, FDA
Approved epoxy-coated ductile iron 10” and
12”. Patented TriForce ™ checks in all sizes
for low head loss and short lay length.
Available shutoffs: monitored butterfly
valves with supervisory switch, OS&Y and
NRS gate valves. Horizontal and vertical
installation approvals.
11
all products brochure
Backflow Preventers (cont’d)
4AN-100 Series Model DC-4AN
Double Check Valves in an n flow pattern in
sizes 2-1/2”-12”. Stainless steel bodies 2-1/2”8”, FDA-Approved epoxy-coated ductile iron
10” and 12”. Patented TriForce™ checks in all
sizes for low head loss and short lay length.
Available shutoffs: monitored butterfly valves
with supervisory switch, OS&Y and NRS gate
valves. Vertical up/vertical down and vertical
up/vertical up installation approvals.
4AN-200 Series Model RP-4AN
Reduced Pressure Principle Backflow Preventers
in an n flow pattern in sizes 2-1/2”-12”. Stainless
steel bodies 2-1/2”-8”, FDA-Approved epoxycoated ductile iron 10” and 12”. Patented
TriForce™ checks in all sizes for low head loss and
short lay length. Available shutoffs: monitored
butterfly valves with supervisory switch, OS&Y
and NRS gate valves. Vertical up/vertical down
and vertical up/vertical up installation approvals.
4W-500 Series Model SVB4W
Spill-resistant pressure vacuum breaker
(SVB) is designed to prevent contamination
of potable water due to back-siphonage
and is ideally suited for indoor and OEM
applications supplied with continuous
pressure where water discharge could cause
problems. Full USC-FCCC&HR, ASSE, and CSA
approvals. Sizes 1/4” to 1/2” Noryl® body.
4AN-600 Series Model DCDA-4AN
Double Check Detector Assemblies in an n flow
pattern in sizes 2-1/2”-12”. Stainless steel bodies
2-1/2”-8”, FDA-Approved epoxy-coated ductile
iron 10” and 12”. Patented TriForce™ checks in
all sizes for low head loss and short lay length.
Available shutoffs: monitored butterfly valves
with supervisory switch, OS&Y and NRS gate
valves. Vertical up/vertical down and vertical
up/vertical up installation approvals.
4A-200 Series Model RP-4A
Reduced Pressure Principle Backflow
Preventers in sizes 2-1/2”-12”. Stainless steel
bodies 2-1/2”-8”, FDA Approved epoxycoated ductile iron 10” and 12”. Patented
TriForce™ checks in all sizes for low head
loss and short lay length. Available shutoffs:
monitored butterfly valves with supervisory
switch, OS&Y and NRS gate valves. Horizontal
installation approvals.
4A-500 Series Model PVB4A
Bronze body pressure vacuum breaker with
internal freeze relief valve and captured
spring cartridge. Features Apollo ball valve
shutoffs with stainless steel handles and
trim. Contact local representative or factory
for approvals. Sizes 1/2”-2”.
4A-600 Series Model DCDA-4A
Double Check Detector Assemblies in sizes
2-1/2”-12”. Stainless steel bodies 2-1/2”-8”,
FDA-Approved epoxy-coated ductile iron
10” and 12”. Patented TriForce™ checks in all
sizes for low head loss and short lay length.
Available shutoffs: monitored butterfly
valves with supervisory switch, S&Y and
NRS gate valves. Horizontal and vertical
installation approvals.
4A-700 Series Model RPDA-4A
Reduced Pressure Detector Assemblies in
sizes 2-1/2”-12”. Stainless steel bodies 2-1/2”8”, FDA Approved epoxy-coated ductile
iron 10” and 12”. Patented TriForce ™ checks
in all sizes for low head loss and short
lay length. Available shutoffs: monitored
butterfly valves with supervisory switch,
OS&Y and NRS gate valves. Horizontal
installation approvals.
4AN-700 Series Model RPDA-4AN
Reduced Pressure Detector Assemblies in an n
flow pattern in sizes 2-1/2”-12”. Stainless steel
bodies 2-1/2”-8”, FDA Approved epoxy-coated
ductile iron 10” and 12”. Patented TriForce™
checks in all sizes for low head loss and short lay
length. Available shutoffs: monitored butterfly
valves with supervisory switch, OS&Y and NRS
gate valves. Vertical up/vertical down and
vertical up/vertical up installation approvals.
12
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Backflow Preventers (cont’d)
4SG-600 Series Model DCDA4SG
Double Check Detector Assembly in sizes
2-1/2”-8”. (10”-4S-600) Light weight for ease
of installation in fire or automatic sprinkler
systems. Provides precise monitoring capability
to unauthorized water usage.
Available
shut-offs: monitored butterfly valves with
supervisory switch and resilient seated OS&Y
gate valves. Vertical and horizontal approvals.
4C-100 Series Model CBBP
ASSE 1022 approved carbonated beverage
backflow preventer. Protects against copper
poisoning by preventing carbonated water
from being drawn into copper pipes. All wetted
components are non-toxic, corrosion resistant,
and approved for use with potable water. Suitable
for supply pressures to 150 psig and water
temperatures from 33° to 130°F. CSA certified to
NSF61 and IAPMO approved. Sizes 1/4” and 3/8”.
40-700 Series Model RPDA40
Reduced Pressure Detector Assembly.
Detects unauthorized use of water in fire
and sprinkler systems. Ductile iron body is
epoxy coated with bronze metered bypass.
Working pressures to 175 psig; operating
temperatures, 33°F to 140°F. Approved ASE
1047, FM, UL Classified, USC’s FCCC&HR.
Sizes 3” to 10”
Model TKU Series
Apollo three and five valve test kits are
lightweight and portable.
They come
equipped with a gauge, hoses and all
required fittings in a protective molded
plastic case. For DCV, RPZ, DVB and SVB
backflow preventers.
NEW - Apollo now offers test kit calibration
Vacuum Breakers
38/38LF series Model AVB1
Economical, lightweight and compact
protection against back-siphonage and low
hazard cross connections. Meets ASSE and
CSA standards; listed with IAMPO. For hot
and cold water service up to 212°F at 125
psig for 1” and up to 180°F at 125 psig for
1/4”-2”.
38-502 Model LFVB
Potable water backflow protection for lab
faucets, community sinks, beauty salons,
barber shops. ASSE, CSA approved; IAPMO
listed. Brass body, polished chrome plating,
stainless steel internal parts. 3/8” FNPT
standard; 1/4” optional. Adapters simplify
installation.
37 Series Model VRV Series
Brass or bronze vacuum relief valves. Max
temperature: 250°F, max. water pressure:
200 psig. CSA certified. Sizes 1/2” and 3/4”.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
13
all products brochure
Water Pressure Reducing Valves
36/36LF Series Model PRV
All bronze construction. Supply pressures
to 300 psig; standard outlet range 25 to
75 psig; other pressures available. Max
working temperature of 180°F. Bronze body,
replaceable cartridge, built in by-pass and
high-capacity stainless steel strainer. Many
end connection options, union pipe end
standard. Meets ASSE, CSA and ANSI standards
and is listed with IAPMO. Sizes: 1/2” to 2”.
36H/36HLF Series Model PRVH
All bronze/SS super capacity pressure
reducing valves for commercial and
institutional applications. Complies with
ASSE and CSA standards and is listed with
IAPMO. Bottom clean out plug for easy inline servicing; NPT connections standard.
Flanged connection option available on 2”,
2-1/2” and 3” sizes. Strainers optional. Sizes:
1/2” to 3”.
35 Series Model FWR Series
Bronze feed water pressure regulators;
individually set at 15 psig; adjusts from 10 to
25 psig; fast fill feature; high capacity, screw
in bonnet and in-line stainless steel strainer.
210°F max. temperature, max. pressure:
100 psig, 1/2” union threaded , threaded or
solder union connections.
36C Series Model PRVC
Compact and corrosion-resistant. Supply
pressures up to 400 psig; built in by-pass
relieves excessive pressure buildup. Working
temperatures to 180°F, 50 psig standard
factory setting; easy screw adjustment.
Meets ASSE, CSA and ANSI standards and
is listed with IAPMO. FNPT, sweat union,
PEX, PUSH, ApolloXpress or FNPT union
connections available. Sizes: 1/2” to 1”.
A127 Series
Apollo control valves are ideal for a
wide range of commercial and industrial
applications, wherever the flow, pressure
or level of liquids needs to be controlled.
Hydraulically operated diaphragm main
valve automatically controls non-corrosive,
non-abrasive fluids by means of a wide range
of pilots.
36E/36ELF series
Economy, compact and corrosion-resistant.
Supply pressures up to 400 psig; built
in by-pass relieves excessive pressure
buildup. Working temperatures to 180°F, 50
psig standard factory setting; easy screw
adjustment. Meets ASSE, CSA and ANSI
standards and is listed with IAPMO. FNPT,
sweat union, PEX, PUSH, ApolloXpress or FNPT
union connections available. Sizes: 1/2” to 1”.
Thermastatic Mixing Valves
34A/34ALF/34H Model MVA-MVH Series
Thermostatic Mixing Valves. 34A Series
ASSE 1017 certified Point of Source mixing
valves are designed for hot water distribution
systems; 34H Series are designed for radiant
heat applications, to provide better control
of hot water supply. Numbered indicator
control allows easy setup and fingertip control.
Available in low or high temperature range
options depending on application. Integrated
check valves and strainers provide added
protection against cross flow & foreign particles.
Thermostat over temperature protection.
14
34B/34BLF Series Model MVB
Scald Protection Mixing Valves. 34B Series
Dual ASSE 1017 and 1070 certified Point of Use
mixing valves are designed to be used for single
or multiple fixtures requiring flow rates as high
as 17 GPM. These valves use a thermostatic
element that senses outlet temperature and will
compensate for fluctuating inlet temperature
and pressure. The mixed water temperature
range is 85°-120°F and will hold a desired
temperature within ±3°F. The 34B also has an
adjustable temperature limit stop to prevent
the valve from being set above 120°F.
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Mixing Valves (cont’d)
34C Series Model MVC Series
Commercial High-Capacity Mixing Valves.
34C Series ASSE 1017 listed, high-capacity
mixing valves are thermostatically controlled
regulating valves designed for use in large
commercial potable and non-potable hot
water systems. Simple adjustment of water
temperature from 90°-140°F or 130°-180°F.
34E/34ELF Series Model MVE
Apollo 34E emergency mixing valves are
designed to control the cold and hot water
temperature to deliver tepid water at a
predetermined temperature to emergency
eyewash/face wash fixtures. The 34E provides
precise temperature and flow control in the
event of cold water, hot water, and thermostatic
element failures. Made in the USA. ASSE 1071
listed and meets ANSI/ISEA Z358.1.
34D/34DLF Series Model MVD Series
“Point of Use” Mini-Mixer Thermostatic
Valves. 34D ASSE 1070 certified mixing
valves are designed to throttle both the hot
and cold water inlet supplies to compensate
for temperature and pressure fluctuations.
The mixed water temperature range is 85°120°F and will hold a desired temperature
within ±2°F. The 34D has built in check
valves, thermal actuator protection and an
adjustable temperature limit stop to prevent
the valve from exceeding 120°. Available
with cold water by-pass option.
34HL Model MVHL Series
Multiple-Fixture Hi-Lo Mixing Valve. Fully
ASSE 1069 and 1017 compliant, the 34HL
Series protects against scalding and thermal
shock by providing ±5° output temperature
control for multiple fixtures in commercial
and institutional settings. Patented design
eliminates “dead-zones.” Made in USA.
34-200 Series
Apollo 34-200 economy thermostatic mixing
valve provides non-ASSE extension of water
heater capacity and hot water temperature
control in hydronic heating systems.
Available in low or high temperature options
for floor or baseboard applications. Made in
the USA. Solder sizes 1/2” and 3/4”.
Safety Relief Valves
10-100,200,300,400 Model RVW10 Series
Brass/bronze safety relief valves protect
ASME Section IV hot water heating boilers
and hydronic heating systems.
Highcapacity design features corrosion resistant
construction.
Brass, satin or polished
chrome finishes available. Set pressures 2080 psig @250°F. Sizes 3/4” male and female
inlet connections.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
10-512,322 Model RVS/RVW Series
Compact ASME Section VIII steam service
safety valves feature stainless steel springs
and elastomer soft seating for dependable
operation. Standard equipment on steam
sterilizers, cookers and kettles. Brass, satin
or polished chrome finishes. 1/2” model
available with stainless steel wetted trim.
Set pressures to 60 psig @ 312°F. Sizes 1/2”
and 3/4”.
15
all products brochure
Safety Relief Valves (cont’d)
10-600 Model RVW60 Series
Heavy-duty bronze safety relief valves
protect ASME Section IV hot water heating
boilers and hydronic heating systems. Highcapacity design features corrosion-resistant
construction, isolating diaphragm and
elastomer soft seats. Set pressures 15 to
160 psig @ 250°F. Available with standard or
expanded outlet, sizes 3/4” -2”.
14-200 Model RVS14 Series
High-capacity safety valves for ASME Section
IV low pressure steam heating boilers. One
piece cast bronze body features top guided
design, chrome-plated seat and PTFE-faced
soft seat. Optional test gag available permits
hydrostatic testing. Set pressures 5 to 15
psig @ 250°F. Sizes 2”, 2-1/2” and 3”. ASME
Section IV certified. 15 psi only.
14-600 Model RVV14 Series
High-volume vacuum relief valves feature
one piece cast bronze bodies, Teflon coated
discs and elastomer soft seating to provide
accurate and dependable operation. Relief
settings from 8 to 30” Hg @ 400°F. Sizes 2”,
2-1/2”, and 3”.
16 Series Model RVG16 Series
Economical relief valves for general purpose
non-code overpressure protection and
bypass relief applications. Applications
include liquid bypass or thermal expansion
relief of well pumps, tanks, fire protection
systems and all types of water or liquid
piping systems. Bronze bodies, stainless steel
springs and soft seating. Standard pressure
settings from 50-175 psi. Sizes 1/2” and 3/4”.
16-503,504 Model RVG16C Series
Calibrated pressure relief valve allows for
in-line pressure adjustments without the
need for pressure gauge. Provides static
overpressure protection for liquid filled
systems such as well pumps, tanks, and
fire protection systems. Preset at 100 psig.
Adjustable in 25 psig increments from 50 to
175 psig. Bronze body, inlet sizes 1/2”-3/4”.
Outlet size: 1/2”.
16
12 Series Model RVS12 Series
Medium capacity safety valves protect
ASME Section IV low pressure steam heating
boilers. Cast bronze, full nozzle design
features PTFE faced elastomer soft seating
for dependable operation. Set pressures 5 to
15 psig @ 250°F. Sizes 2”, 2-1/2” and 3”. ASME
Section IV certified. 15 psi only.
14-400 Model RVA14 Series
High volume air relief valves designed for
low pressure non-code air and gas service.
Rugged bronze construction features
elastomer soft seating and Teflon coated
discs for dependable operation. Used to
protect low pressure compressors and
tanks, high-volume blowers, and pneumatic
conveying systems. Pressure settings from 4
to 22 psig @ 400°F. Sizes 2”, 2-1/2” and 3”.
15 Series Model RVA15 Series
OEM style brass barstock safety valves for air
and gas service. ASME Section VIII certified.
Used to protect air compressors, receivers,
and instrument air systems. Stainless steel
springs and viton soft seating provide
superior seat tightness and vibration
resistance. Set pressures to 250 psig @325°F.
Sizes 1/4”, 3/8”, 1/2”, 3/4” and 1”.
16-501 Model RVS14 Series
Adjustable relief valves protect equipment by
providing low volume liquid relief or bypass
control. Excess volume may be discharged
back to the low pressure source. Ideal for
agricultural sprayers and simple commercial
or industrial pressurized systems. Adjustable
50-250 psi or 250-600 psi. Size 1/2”. Seats:
Nitrile or PTFE,
17 Series Model RVW17 Series
Bronze pressure-only relief valves protect
plumbing systems, storage tanks and
tankless coil water heaters from excessive
pressure. CSA certified design conforms
to HUD/FHA requirements. 3/4” model is
ASME Section IV certified from 75-150 psig.
Stainless steel springs and elastomer soft
seats are standard. Set pressures to 160 psig
@ 250°F. Sizes 1/2” and 3/4”.
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Safety Relief Valves (cont’d)
18C-400 Model TPR Series
Residential T&P relief valves protect hot
water heaters from excessive pressure and
temperatures. CSA certified design conforms
to HUD/FHA requirements. 3/4” model is
ASME Section IV certified at 125 and 150
psig settings. Choice of element lengths.
Available with extended body length to suit
water heaters with extra thick insulation. Set
pressures 125 or 150 psig @ 210°F. Sizes 1/2”
and 3/4”.
19 Series
Bronze high capacity safety valves for steam
or air/gas service. ASME Section I and VIII
certified. Protects steam boilers, pressure
vessels and pressure piping systems.
Standard features include stainless steel
springs, tapped drain connections and Teflon
soft seat for superior performance. Metal to
metal seating and stainless steel trim options
available. Set pressures to 300 psig @ 422°F.
Sizes 1/2” through 2-1/2”.
119 SerieS
High capacity cast iron flanged safety valves
for steam or air/gas service. ASME Section
I and VIII certified. Used to protect steam
boilers, pressure vessels and pressure piping
systems. Rugged top-guided design features
flat lapped metal seating and two control
rings for repeatable performance and
extended service life. Stainless steel wetted
trim standard sizes. Sizes 1-1/2” through 6”
NPT and flanged. Set pressure to 250 psig.
530/540 Series
High performance industrial safety relief
valves feature carbon steel or all stainless
steel construction. ASME Section VIII certified
for steam, air/gas and liquid service. Rugged
top-guided full nozzle design features flat
lapped metal seating, self aligning disc insert
and a lower control ring for exceptional
performance and durability. Wide range of
options include elastomer O-ring, metal to
metal, PCTFE and cryogenic preparation
(excluding Model 530). Set pressures to 1200
psig @ 800°F. Sizes 1/2” through 2”.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
18C-500 Model TPC Series
High-capacity commercial T&P relief valves
protect hot water heaters from excessive
pressure and temperatures. CSA certified
design conforms to ASME Section IV and ANSI
Z21.22 requirements. Corrosion resistant
all bronze body, isolating diaphragm and
screw-in cage that eliminates rusting steel
screws. SS springs and thermostats. Choice
of element lengths. Set pressures 125 or 150
psig @ 210°F. Sizes 3/4” through 2”.
29 Series
Compact OEM-style bronze safety valves for
steam, air/non-hazardous gas service. ASME
Section I and VIII certified for use on steam
boilers, sterilizers, pressure vessels and
cookers. Standard features include stainless
steel springs, tapped drain connections and
patented Teflon soft seat for superior seat
tightness. Optional stainless steel wetted
trim. Set pressures to 200 psig @ 406°F. Sizes
3/8” through 1-1/4”.
510/520 Series
High performance bronze safety relief valves
are ASME Section VIII certified for steam, air/
gas and liquid service. Rugged top-guided
full nozzle design features flat lapped metal
seating, self aligning disc insert and a lower
control ring for exceptional performance
and durability. Available with a choice of
brass or stainless steel trim. Wide range of
options includes elastomer O-ring or PCTFE
soft seating and cryogenic preparation. Set
pressures to 1200 psig @ 422°F. Sizes 1/2”
through 2”.
DPE Series
Cast iron drip pan elbows connect to the
discharge outlet of steam service safety
valves to safely direct the steam discharge
and condensation away from the valve.
Isolates the valve from piping stresses which
can adversely affect valve performance.
Sizes 3/4” through 8”, threaded and flanged
connections.
17
all products brochure
WYE Strainers
59/59LF Series Model YSB
Cast bronze body with 304 stainless steel
screen; 400 CWP psig rating; wide variety
of mesh screens available. Optional blowout plug tapping. Sizes: 1/8” to 4”. UL listed
models available in sizes 1/8” to 1/2”.
59-V Series Model MSB
Ideal for OEM applications where space is
a premium. Corrosion resistant body and
cleanout cap with standard 50 mesh stainless
steel screen. Other screen sizes available.
Rated 400 psig at 210°F CWP and 125 psig at
350°F WSP. Sizes: 1/4” NPT.
59/59LF-300 Series Model YSBS
Compact corrosion resistant bronze solder
end Y-strainers with stainless steel screens.
Generous socket wall thickness assures high
strength solder joints. Pressures to 400 CWP
psig. Sizes: 1/2” to 2”.
Model YSS Series
Cast CF8M stainless steel body with 304
stainless steel screen. Rated at 600 psig for
1124°F steam and 1440 psig for CWP. Screen
cover is NPT tapped for blow-off connection.
Sizes 1/2” to 1”.
Apollo International Strainers
Model YCT Series
Class 250 FNPT cast iron body with 304
stainless steel screen. Rated 250 psig at 406°F
steam and 400 psig at 150°F CWP. Screen
cover is NPT tapped for blow-off connection.
Sizes 1/4” to 3” NPT.
Model 125YF
Flanged cast iron bodies with 304 stainless
steel screens. ANSI Class 125. Sizes from 2” to
16” and pressure ratings to 150 psig. Screen
cover has a tapped and plugged blow-off
connection. Optional FDA grade epoxy
coating.
Model YCS Series
FNPT cast carbon steel body with 304
stainless steel screen. Rated at 600 psig at
839°F steam and 1480 psig at 100°F CWP.
Screen cover is NPT tapped for blow-off
connection.
18
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Water Gauges
20 Series Model WG Series
21 Series Model WG Series
Rough bronze water gauges; aluminum or
composition wheel, needle drain valve in
lower arm, ball checks (optional) prevent
operator scalding in case of glass breakage.
Chain lever and expansion tank models
available. Sizes: 3/8”, 1/2”, and 3/4”.
Rough bronze water gauges; with extended
shank; 1-3/4” shank length; aluminum or
composition handle. For 1/2” pipe size.
23 Series Model WG3S, WG6S
24 Series Model WG239, WG35
Stainless steel direct reading water gauges.
Max. working pressure: 500 psig (subject
to limitation of gauge glass), aluminum
or composition wheel, stainless steel ball
valve drain in lower arm. Non-automatic,
automatic, ASME automatic and expansion
tank models. Sizes: 1/2” and 3/4”.
Rough bronze direct reading water gauges.
ASME automatic or non-automatic models
available; also available with chain lever; ball
valve drain. Sizes: 1/2” and 3/4”.
25 Series Model WG2P, WG3P, WG3SP
Polished bronze and chrome plated water
gauges. Aluminum or composition wheel,
needle drain valve in lower arm, nonautomatic and automatic models, chain
lever available. Sizes: 3/8” to 3/4”.
Pressure Ratings:
Pressure ratings vary by models and are subject to
limitations of the valve body, gauge glass and packing
materials. Refer to Water Gauge Catalog PHBRWGA for
detailed information.
Custom OEM configurations available.
Contact customer service for details.
Boiler Drains
31 Series Model DV/WHDV
Rough bronze drain valves for water heaters
or heating boilers. Pressure rated to 200 psig.
Shank lengths 5/8” to 3-1/2”. Pipe sizes: 1/2”
and 3/4”.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
19
all products brochure
Air and Gas Cocks
41 Series Model AC
Polished and satin brass air cocks with “tee”
handle or lever handle. Spring and nut
bottom with a wide range of connections
available.
54 Series – Model GCA
Gas hose-end shut-off valves. 1/8” NPT or
standard tube sizes. Capacity: 56,500 Btu/
hour. Pipe sizes: 3/8” to 3/4”.
GB-15, GB-16 – Model GBVU, GBVA
These Apollo InternationalTM gas appliance
ball valves are designed for natural gas,
manufactured and mixed gas, liquefied
petroleum gasses and LP gas-air mixture
applications. They comply with the latest
editions of ANSI, CSA, and UL published
standards.
GB-50 – Model GBVB Series
UL and CSA design-certified manual gas
shut-off ball valves for many fuel types for
up to 5 psig. Standard female threaded
connections. Available with single or dual
tapped gas ports. Sizes: 1/2” to 2”.
94 MBV Series
Apollo InternationalTM mini ball valve.
Competitive, conventional port valves, constructed
of heavy-duty forged brass, with 100% Teflon
seats and gland follower with double Viton
o-rings to prevent stem leakage. Reversible
handle for tight space applications. CSA 1/2
psig and ASME 2 and 5 psig gas ratings. Rated
to 600 psig at 100°F. Operating temperatures
from -40°F to 300°F. Sizes: 1/8” and 1/4”.
56 Series – Model GCP
Pilot gas cocks. 1/2 psig for 32°F to 125°F
service. CSA design certified. 1/8” MNPT x
various 1/4” tube connections.
GB-10 – Model GBV Series
CSA design-certified manual shut-off ball
valves for many fuel types for up to 5 psig.
Capacities: 300,000 to 1.1 million BTu/
hour. Standard female x female threaded
connection. Sizes: 3/8” to 1”.
77G-UL Series
77G-UL Series ball valve is a UL and CSA listed
fuel shut off valve approved for a variety of
flammable gasses and liquids. Bronze body,
premium multi-fill MPTFE seats and stem
packing. “Solid Ball” design for true full port
flow. Sizes 1/2” to 1” NPT.
80 Series
Bronze ball valve for LP gas, natural gas,
flammable liquids and heated oil. Adjustable
packing gland, UL listed. Sizes 1/4” to 3”.
20
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Expansion Tanks
16-XT series
Conbraco non-potable expansion tanks help
maintain balanced pressure throughout
a hot water heating system by absorbing
thermal expansion. Pre-pressurized, they’re
designed to prevent system damage and
unnecessary discharges by relief valves and
ensure long, trouble-free system life.
40-XT series
Designed to protect closed water supply
systems, appliances and piping from the
hazards of thermal expansion, such as
premature water heater failure. Installs
easily on direct fired gas, oil and electric
hot water heaters and storage tanks. Their
pre-pressurized steel design includes an
expansion membrane that stops any contact
between the water and air in the tank.
Specialty Valves
35-FC Series – Model FCV Series
Bronze body flow check provides positive
gravity shut-off in hydronic systems.
Convenient override permits continuous
circulation or drainage when required.
Available with NPT or sweat connections,
NPT models are both angle and horizontal
checks. Expansion tank may be installed on
the angle check. Maximum temperature is
250°F. Max. pressure is 125 psig.
58 Series – Model HCB
Balancing valves for hydronic flow control;
150 psig rating. Copper tube sizes: 1/2” and
3/4”.
78-600 Series – Model PBS
Purge, balance and shut-off valve, has solid
brass “can’t lose” cap and chain. Hose thread
connection for blow off and easy purging,
maximum temperature: 250°F, maximum
pressure: 600 psig WOG/CWP in open
position.
78 RV/78LF RV Series – Model EXV
Water heater shutoff/thermal expansion
control valves provide both water heater
shutoff and code required thermal expansion
protection. The 78-RV combination valves
are offered in three pressure settings, 125,
100 and 80 psig. Available in 3/4” size with
sweat, threaded and pex connections.
Various relief valve connections available.
CSA and IAPMO listed.
Gate, Globe & Check Valves
30/30LF series
Made in the USA. Class 125, 150, 300 and 200
CWP bronze gate valves meet MSS SP-80.
Thread and union bonnet, rising and nonrising stem. Irrigation and lead free models
available. Sizes 1/4” through 3”, NPT and
solder.
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
33/33LF series
Made in the USA. Class 125, 150, 300 and 200
CWP bronze gate valves meet MSS SP-80.
Thread and union bonnet, bronze and PTFE
seat options. Lead free models available.
Sizes 1/4” through 3”, NPT and solder.
21
all products brochure
Gate, Globe & Check Valves
61Y/61YLF series
610 & 611 series
The Apollo Model 161S Swing Check
provides a cost effective “made in the USA”
alternative to globally sourced check valves.
These valves are cast, machined, assembled,
andtested in South Carolina. Bronze and
PTFE seat models. Lead free option. Sizes
1/4” through 3” NPT and solder.
The Apollo InternationalTM Models 610F
and 611F Flanged 125 Class Cast Iron Gate
valve provides full flow capabilities. The
Apollo Gate valve can reliably be installed in
most plumbing and heating systems (or
building service piping). MSS SP-70 Sizes
2” through 24”.
620 & 621 series
711 & 721 series
The Apollo InternationalTM Models 620F
& 621F Flanged 250 Class Cast Iron Gate
valve provides full flow capabilities. The
Apollo Gate valve can reliably be installed in
most plumbing and heating systems (or
building service piping). MSS SP-70 Sizes
2” through 12”.
The Apollo InternationalTM Models 711F &
721F Flanged 125 & 250 Class Cast Iron
Globe valve provides efficient throttling
capabilities. The Apollo Globe valve can
reliably be installed in most plumbing and
heating systems (or building service piping).
MSS SP-85 Sizes 2” through 10”.
910 & 920 series
The Apollo InternationalTM Models 910F &
920F Flanged Cast Iron Swing Check valve
provides full flow capabilities. It provides
reliable and economical protection against
reverse flow. The Apollo Swing Check valve
can reliably be installed in most plumbing and
heating systems (or building service piping).
MSS SP-71 Sizes 2” through 20”.
61-700 Series – Model CV
Ideally suited for all OEM applications where
space is a premium. Excellent for use on
water and air. They feature a bubble tight
soft seat design with a very light loaded
stainless steel spring
910W series
The Apollo InternationalTM Model 910WB
Cast Iron Wafer Check valve provides full
flow capabilities. It provides reliable and
economical protection against reverse flow.
The Apollo Wafer Check valve can reliably
be installed in most plumbing and heating
systems (or building service piping). Sizes 2”
through 24”.
61/61LF, 62 Series – Model CVS, CVB
Ball cone check valves in bronze (to 3”) and
316 stainless steel (to 2”). Reinforced PTFE
ball cone check provides excellent chemical
and corrosion resistance and requires no
radial alignment. Standard connection for
bronze is FNPT (to 3”), male x female (to 2”).
For stainless steel, FNPT only.
61-500/62-500 Series – Model CVBE, CVSE
Bronze check valves with standard EPR or
optional Nitrile seat for bubble tight shut
off to 2”. Stainless steel check valves with
fluorocarbon seat to 1”. Optional 5 and
10 psig cracking pressure through size 1”.
Standard connection for bronze is FNPT,
bronze sweat connection available to 1”, for
stainless steel FNPT only.
22
www.apollovalves.com
Customer Service (704) 841-6000
all products brochure
Warranty and limitations of liability
Conbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the
order or price list and will be free of defects in workmanship or material for a period of FIVE years from the date of delivery to you, our initial purchaser. This
warranty applies to Apollo brand product with “Made in the USA” markings only.
Should any failure to conform to this warranty appear within FIVE years after the date of the initial delivery to our initial purchaser, Conbraco will, upon written
notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco’s recommendations
and standard industry practice, correct such defects by suitable repair or replacement at Conbraco’s own expense.
APOLLO INTERNATIONAL PRODUCTS: Conbraco Industries, Inc. warrants its International products, to its initial purchaser only, that its international products
which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a
period of TWO years from the date of delivery to you, our initial purchaser.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY
OF QUALITY, WHETHER EXPRESSED OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in
the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of Conbraco to our initial purchaser, with respect to the goods,
whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether expressed
or implied shall pass through our initial purchaser to any other person or corporation.
LIMITATION OF LIABILITY: Conbraco Industries, inc. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH
AS, BUT NOT LIMITED TO, DAMAGES OR TO LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED
OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET
FORTH HEREIN, ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE
PRICE OF THE GOODS UPON WHICH SUCH LIABILITY IS BASED.
* It is the end user’s responsibility to confirm that items intended for use satisfy local codes and standards.
REGIONAL MANAGERS
INTERNATIONAL
International sales reps & regional managers
AREAS COVEREDEMAILPHONEFAX
Conbraco International Sales:
Jose Arias
Mexico
[email protected]
956-631-4542
956-631-4681
Luis Guzman
Caribbean
[email protected]
787-739-5620
JR Jefferson
Central & South America
[email protected]
832-220-3783
Mike Link
United Kingdom
[email protected]
44-0-1302-560-560
44-0-1302-367-661
Luke Liu
China
[email protected]
411-869-02498
411-869-02498
Jonathan Yap
Asia Pacific/India
[email protected]
65-9626-9241
65-6753-0131
Europe/Africa/Australia/Israel
Contact Customer Service
704-841-6000
704-841-6021
Pegler Yorkshire Mid East
Middle East (except Israel)
[email protected]
971-4-454-2353
971-4-454-2352
APOLLO VALVES REGIONAL SALES DIRECTORS
Brian Blalock
East
Skip Wilson
West
APOLLO VALVES REGIONAL MANAGERS
Kevin Ashworth
Mid Atlantic
Steve Brown
Northwest
Andy Fretz
Canada - Commercial
Ben Lauletta
Northeast
Sanford Pauly
North Central
Hector Rivera
Florida
James Saldivar
South Central - Industrial
Nick Shelley
South Central - Commercial
Jim Todman
Canada - Industrial
LASCO FITTINGS IRRIGATION REGIONAL MANAGERS
David Beyer
Northeast
Ron Modugno
West
Jimmy White
Central
Ben Freeman
Southeast
Rick Williamson
Eastern Specifications Manager
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
for additional information, submittal sheets and manuals, visit www.apollovalves.com
Customer Service (704) 841-6000
P.O. BOX 247, Matthews, NC 28106
704-614-3744
704-841-6021
760-330-3293
775-854-5722
757-272-6200
425-985-5095
253-862-3548
647-281-3161
905-761-6666
518-795-4629
513-716-7772
513-321-7717
786-210-7010
832-776-5547
214-790-4157
905-407-8385
905-761-6666
P.O. BOX 116, Brownsville, TN 38012
561-718-9379
661-910-5058
661-775-0713
731-234-2372
731-779-3608
205-919-4944
386-451-2307
23
SALES & CUSTOMER SERVICE: Phone: (704) 841-6000
Fax: (704) 841-6020
www.apollovalves.com
SOUTHEAST
REGION
Mid South Marketing, Inc.
VA/MD/Washington, D.C./WV-East
[email protected]
804-213-3801
804-213-3802
Pro Marketing, Inc.NC/SC/[email protected]
Spirit GroupFL (except Panhandle)[email protected]
Tim Morales & Associates, Inc.
AL/FL Panhandle
[email protected]
251-602-8333
251-602-8339
White Wolf [email protected]
800-401-4870888-908-9372
SOUTHERN
REGION
BWC Inc.LA (Commercial Products)[email protected]
Marathon Flow Control
TX, OK, KS except Northeast, LA (Industrial)
[email protected]
214-201-0100
214-201-0104
Southern Marketing Group
MS/TN-West/AR/Bowie Cty.-TX
[email protected]
901-547-0042
901-547-0035
MIDWESTERN
REGION
FourMation SalesMN/ND/SD/[email protected]
Marshall-Rodeno Heartland
NE/IA (Except River Counties)
[email protected]
303-575-6701
303-575-6706
Midwest Spec
Northern OH, Western PA, WV
[email protected]
330-538-0406
330-538-0410
Midwest SpecSouthern OH, [email protected]
New Tech Marketing
Northern-IL/WI-East/IN/MI-UP/IA-River Counties
[email protected]
630-378-4300
630-378-0343
New Tech Marketing
MO/Southern IL/Northeast Kansas
[email protected]
618-394-0329
618-394-0427
V.E. Sales Co., Inc.
MI (Except Upper Peninsula)
[email protected]
586-774-7760
586-774-1490
WESTERN
REGION
Elmco DuddyCA - [email protected]
Gordon & Associates
WA, OR, AK, Northern counties ID
[email protected]
907-441-7184
425-228-7777
HC Fletcher
CA - North (AB 1953 compliant product)
[email protected]
800-432-7047
949-660-9072
Marshall-Rodeno Associated
CO/WY/MT/ID-SE/UT/NV-NE/NM/El Paso-TX
[email protected]
303-575-6701
303-575-6706
Romatec
CA - North PVF (non AB 1953)
[email protected]
877-530-3530
661-588-3534
Southwest Valves
CA (Waterworks and Fire Protection)
[email protected]
559-261-2703
559-261-2711
Southwestern Industrial Sales Co.
AZ/Nevada-SW
[email protected]
480-458-5838
480-458-5843
Spec Management [email protected]
NORTHEAST
REGION
NY-East/NJ-North
[email protected]
856-663-4440
856-663-6644
Conroy & Griese Sales, Inc.
Keith Engle & Associates
OEM accounts
[email protected]
610-827-9560
610-827-9561
Layden CompanyNY-Upstate/PA-East/DE/[email protected]
Urell, Inc.MA/New England [email protected]
IRRIGATION ONLY REPS
OR, WA, Western ID
[email protected]
541-726-0320
541-726-1148
Active Sales Northwest, Inc.
OH, KY, MI, IN, parts of PA, WV, WI
[email protected]
216-595-2888
216-595-2899
Biz Sales Company
Fourmation SalesMN/ND/SD/[email protected]
763-262-4700763-262-4740
Hall MarketingAL, [email protected]
228-547-4637228-832-6666
J&J Midwest Sales
NE, IA, MO, KS
[email protected]
314-422-8419
Jim Benton & Associates
AL, FL Panhandle
[email protected]
205-664-1221
205-664-1277
John [email protected]
Larry PerkinsTX - [email protected]
Marel Enterprises
New England, NY, DE, MD, VA, DC, parts of PA & WV
[email protected]
631-271-1718
631-427-8558
Marshall-Rodeno Associated
CO/WY/MT/ID-SE/UT/NV-NE
[email protected]
303-575-6701
303-575-6706
NSC Marketing Group [email protected]
Pro Marketing, Inc.NC/SC/[email protected]
Sherman DobbsTX - [email protected]
Southern Marketing Group
MS/TN-West/AR/Bowie Cty.-TX
[email protected]
901-547-0042
901-547-0035
Spec Management GroupCA-South [email protected]
VPC [email protected]661-257-3928
CANADA
AGENCYAREAS COVEREDEMAILPHONEFAX
Barclay Sales Ltd.
British Columbia
[email protected]
604-945-1010
604-945-3030
Conbraco Industries, Canada 178 Pennsylvania Ave., Unit 1, Concord, Ontario L4K 4B1 [email protected]
905-761-6161
905-761-6666
D & M Mechanical SalesOntario/[email protected]
Dynamic Agencies, [email protected]
306-343-1901306-343-1901
J. Levandier Sales, Inc.
Nova Scotia, New Brunswick, Prince Edward
Island & [email protected]
Kern Industries, [email protected]
Kern Industries Calgary, Ltd.
Alberta-South
[email protected]
403-730-7791
403-239-8179
Key to the North Sales Agency, Inc. Ontario-North
[email protected]
705-524-6714
705-566-0148
Task Controls, [email protected]
416-291-3004416-754-3481
Tom Beggs Agencies Ltd.Manitoba/NW [email protected]
Ventes Techniques [email protected]
CICA9000 3/12 4,000 CG
current rep list as of 3/5/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement