2013 Bench Products

Bench Products Catalog

2013, Volume 1

2013 Bench Products

Test & Measurement Solutions

Overachiever.

The most powerful scope you can buy for $1,290.

MSO/DPO2000B Mixed Signal Oscilloscope Series*

Introducing the MSO/DPO2000B Mixed Signal Oscilloscope Series. Like all of our MSO/DPO oscilloscopes, these powerful performers have the accuracy and craftsmanship you expect from Tektronix. Only the low price is surprising. Designed with you in mind, they are packed with innovative features to help speed every stage of debug. These scopes boast 16 digital channels, automated search, Wave Inspector

®

for navigating long records and even automated serial decode. All at a starting price that makes perfect sense, and backed by a 5-year warranty.

MSO/DPO2000B Series

Bandwidth 200 MHz, 100 MHz, 70 MHz

Channels 2 or 4 analog

16 digital (MSO Series)

Record Length

Display

Serial Bus Options

1 Mpoints

7.0"

I

2

C, SPI, RS-232/422/485/UART, CAN, LIN

Optional Analysis

Starting Price

--

$1,290

MSO/DPO3000 Series

Bandwidth 500 MHz, 300 MHz, 100 MHz

Channels 2 or 4 analog

16 digital (MSO Series)

Record Length

Display

Serial Bus Options

Optional Analysis

5 Mpoints

9.0"

I

2

C, SPI, RS-232/422/485/UART, CAN, LIN,

FlexRay, I 2 S/LJ/RJ/TDM, MIL-STD 1553

Power Analysis, HDTV & Custom Video Triggering

Starting Price $3,380

MSO/DPO4000B and MDO4000 Series

Bandwidth 1 GHz, 500 MHz, 350 MHz, 100 MHz

Channels

Record Length

Display

2 or 4 analog

16 digital (MSO & MDO Series)

1 RF (MDO Series)

Up to 20 Mpoints

10.4"

Serial Bus Options I

2

C, SPI, RS-232/422/485/UART, CAN, LIN, FlexRay,

I 2 S/LJ/RJ/TDM, MIL-STD 1553, USB, Ethernet

Optional Analysis

Starting Price

Power Analysis, Limit & Mask Testing, HDTV &

Custom Video Triggering

$7,150

See the scope in action, analyze the specs and learn more at

www.tektronix.com/mso2000

*MSO2024B shown in picture and priced at $3,570.

© 2012 Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending.

TEKTRONIX and the Tektronix logo are registered trademarks and Wave Inspector is a trademark of Tektronix, Inc.

2 www.tektronix.com/mso2000

Table of Contents

Highlights

SourceMeters

Switch Systems

Semiconductor Test

Systems

Digital Multimeters

Data Acquisition

Low-level Instruments

Power Supplies

Tektronix and Keithley -

From Nanovolts to Gigahertz.

As part of the Tektronix portfolio, Keithley Instruments brings the DC test tools you need to do your job better and with greater confidence. Take a look inside to see the capabilities we provide. Together Tektronix and Keithley address your measurement needs from low level precision measurements to powerful time domain measurements.

MDO4000 Mixed Domain Oscilloscope -

Transforming the way you test.

The world’s first oscilloscope with a built-in spectrum analyzer

For the first time ever, you can capture time-correlated analog, digital and RF signals for a complete system view of your device. Solve the most complicated design issues, quickly and efficiently, with an oscilloscope as integrated as your design.

See page 17 for more details.

PA4000 Power Analyzer

The PA4000 performs accurate measurements, even when power is distorted or noisy. It's versatile, too, with harmonics analysis, motor measurements, PC interfaces and dual current shunts per channel all standard.

See page 28 for more details.

For an in-depth look at all of our products, including demos and 360-degree product explorers, please visit www.tektronix.com.

All information on www.tektronix.com supersedes all other information.

Table of Contents

4-7 Oscilloscope Selection Guide

Basic Oscilloscopes

8 TBS1000 Series

9 TDS2000C Series

10 TPS2000B Series

11 THS3000 Series

12 TDS3000C Series

Bench Oscilloscopes

13 MSO/DPO2000B Series

14 MSO/DPO3000 Series

15 MSO/DPO4000B Series

17 MDO4000 Series

Performance Oscilloscopes

18 MSO/DPO5000 Series

19 DPO7000C Series

20 Probes and Accessories

21 Signal Generator Selection Guide

22 AFG2000

23 AFG3000 Series

24 SourceMeter Selection Guide

25 2400 Series

26 2600B Series

27 Power Analyzer Selection Guide

28 PA4000 Series

29 Digital Multimeters Selection

Guide

30 Tektronix DMM4020

31 Tektronix DMM4040/4050

32 Keithley Models 2000, 2100, 2110

33 Keithley Models 2001, 2002, 2010

34 Data Acquisition Selection Guide

35 Series 2700

36 Series 3700

37 Low-Level Instrument Selection

Guide

38 2182A Nanovoltmeter

39 6220 / 6221 Current Sources

40 6485, 6487 Picoammeters, 6482

Picoammeter & Voltage Source

41 6514 / 6517B / 6430 Electrometers

42 Power Supplies Selection Guide

43 PWS2000 Series

44 PWS4000 Series

45 Programmable Single Channel DC

Power Supplies with Remote Sensing

46 Programmable Multiple Channel DC

Power Supplies with Remote Sensing

47 Portable Device Battery/Charger

Simulator

48 High Speed Power Supplies

49 Frequency Counter/Timers

Selection Guide

50 FCA3000/3100 Series

51 MCA3000 Series

52 RF Power Meters Selection Guide

53 PSM3000, 4000 and 5000 Series

54-55 Service Solutions www.tektronix.com

3

Choosing Your Oscilloscope

Choosing Your Oscilloscope

Tektronix offers oscilloscopes for many different applications and uses. To help you choose the right scope for your needs, the most common criteria for selecting a scope are listed below, along with helpful tips for determining your requirements.

All oscilloscopes have a low-pass frequency response that rolls off at higher frequencies. Oscilloscope bandwidth is specified as being the frequency at which a sinusoidal input signal is attenuated to 70.7% of the signal’s true amplitude – the -3 dB point. Your oscilloscope must have sufficient bandwidth to capture all relevant frequency components of your signal. If you regularly work with digital signals, it may be easier to consider bandwidth by comparing signal and oscilloscope rise time specifications. Use an oscilloscope with a rise time specification five times faster than your signal rise time to keep error below 2%.

Rule: Bandwidth > 5 X Highest Signal Frequency

Record length is the number of samples the oscilloscope can digitize and store in a single acquisition. Since an oscilloscope can store only a limited number of samples, the waveform duration – or length of “time” captured – will be inversely proportional to the oscilloscope’s sample rate. A longer record length enables a longer time window to be captured with high resolution.

Rule: Captured Time = (Record Length) / (Sample Rate)

100

85

70.7

0.1

0.5

Frequency (GHz)

1.0

Digital Channels and Spectrum

Analyzer Input

Today’s oscilloscopes offer more than just analog channels for system-level troubleshooting of complex designs.

If you need to analyze a parallel bus or multiple serial buses, the

Tektronix MSO Series of mixed signal oscilloscopes offers 16 digital channels and up to 4 analog channels for analyzing multiple signals at once.

If you are working with RF signals, the Tektronix MDO Series of mixed domain oscilloscopes offers a built-in spectrum analyzer for time-correlated analysis of analog, digital and RF signals.

Figure 1: Typical frequency response curve for a general purpose oscilloscope

The faster an oscilloscope samples, the greater the resolution and detail of the displayed waveform, and the less likely that critical information or events will be lost. Tektronix recommends at least

5X oversampling to ensure signal details are captured and to avoid aliasing.

Rule: Sample Rate > 5 x (Highest Frequency Component)

Tektronix oscilloscopes offer a range of features and analysis capabilities. When choosing your scope, you should review available triggers, waveform search tools, automated measurements, and analysis packages such as serial bus analysis, jitter and power analysis to ensure they meet your needs.

4 www.tektronix.com

Basic Oscilloscopes Selection

Basic Oscilloscopes

To accurately visualize the intricate details of fast changing signals, you need an oscilloscope with uncompromised performance. Tektronix basic oscilloscopes feature Digital Real-Time Sampling with at least x5 over sampling on all channels, all the time, to precisely capture today's complex signals.

Channels

Bandwidth

Sample Rate

TBS1000

2

25 MHz to 150 MHz

500 MS/s to 1 GS/s

TDS2000C

2, 4

50 MHz to 200 MHz

500 MS/s to 2 GS/s

TPS2000B

2, 4 (isolated)

1 GS/s to 2 GS/s

THS3000

4 (isolated)

TDS3000C

2, 4

100 MHz to 200 MHz 100 MHz to 200 MHz 100 MHz to 500 MHz

2.5 GS/s to 5 GS/s

Max Record Length

Trigger Types

2.5 k points 2.5 k points 2.5 k points 10 k points

Edge, Pulse (width), Video Edge, Pulse (width), Video Edge, Pulse (width), Video Edge, Pulse (width),

Event, Video,

Non-interlaced

1.25 GS/s to 5 GS/s

10 k points

Edge, Logic (Pattern,

State), Pulse (Glitch,

Width, Runt, Slew Rate),

Video, Extended Video*,

Comm*

*Optional

Optional Serial Bus

Decode and Analysis

-----

Connectivity

Waveform Math and Analysis

Software

Battery Operation

Starting Price

Additional Resources

5 www.tektronix.com

USB Host, USB Device,

GPIB*

*Optional

USB Host, USB Device,

GPIB*

*Optional

RS-232 (includes

RS-232-to-USB Host

Serial Cable), Centronics,

CompactFlash

USB Host, USB Device USB Host, LAN

(10Base-T Ethernet)

Optional TDS3GV

Module: GPIB, RS-232, and Video Out

16 Automated

Measurements, Arithmetic

Waveform Math, FFT

16 Automated

Measurements, Arithmetic

Waveform Math, FFT,

Waveform Limit Testing,

Automated Datalogging

Optional:

TPS2PWR1: Power

Measurement and

Analysis

11 Automated

Measurements, Arithmetic

Waveform Math, FFT

Optional:

TPS2PWR1: Power

Measurement and

Analysis

21 Automated

Measurements, Arithmetic

Waveform Math, FFT

25 Automated

Measurements, Arithmetic

Waveform Math, FFT

TDS3AAM: Advanced

Analysis

Optional:

TDS3LIM: Limit Testing

TDS3TMT: Telecom Mask

Testing

TDS3VID: HDTV and

Custom Video Triggering

PC Communications

Software: OpenChoice

®

Desktop, Educator

Classroom and Lab

Resource CD

PC Communications

Software: OpenChoice

®

Desktop, NI LabVIEW

SignalExpress

Edition LE

™ Tektronix

PC Communications

Software: OpenChoice

®

Desktop, NI LabVIEW

SignalExpress ™

Edition LE

Tektronix

PC Communications

Software: OpenChoice

®

Desktop

PC Communications

Software: OpenChoice

®

Desktop, NI LabVIEW

SignalExpress ™

Edition LE

Tektronix

--

$520

--

$890

One TPSBAT Battery

Pack Included Standard

$2,990

One THSBAT Battery

Pack Included Standard

$4,110

Requires Optional

TDS3BATC Battery Pack

$5,080

Bench Oscilloscopes Selection

Bench Oscilloscopes

With the MSO/DPO Series of bench oscilloscopes, you can analyze analog and digital signals with a single instrument. And now, you can analyze your RF signals too with the MDO Series - the World's first and only mixed domain oscilloscope

+ spectrum analyzer. Combine that with automated serial and parallel bus analysis, innovative Wave Inspector

®

controls for rapid waveform navigation, and automated power measurements, and the Tektronix bench oscilloscopes provide the feature-rich tools you need to simplify and speed debug of your complex design.

Channels

Bandwidth

Spectrum Analyzer

Frequency Range

Sample Rate

Max Record Length

Trigger Types

Optional Serial Bus

Decode and Analysis

Connectivity

Waveform Math and Analysis

Software

Battery Operation

Starting Price

Additional Resources

6 www.tektronix.com

MSO/DPO2000B

2, 4 analog channels;

16 digital channels (MSO2000B)

70 MHz, 100 MHz and 200 MHz

--

MSO/DPO3000

2, 4 analog channels;

16 digital channels (MSO3000)

100 MHz to 500 MHz

--

MSO/DPO4000B

2, 4 analog channels;

16 digital channels (MSO4000B)

100 MHz to 1 GHz

--

MDO4000

4 analog channels;

16 digital channels;

1 spectrum analyzer input

100 MHz to 1 GHz (analog)

50 kHz - 3 GHz or

50 kHz - 6 GHz (RF)

1 GS/s (analog);

1 GS/s (digital, only 1 pod);

500 MS/s (digital, both pods)

1 Mpoints

Edge, Logic, Pulse Width, Runt,

Set-up and Hold, Rise/Fall Time,

Video, I 2 C*, SPI*, CAN*, LIN*,

RS-232/422/485/UART*,

Parallel (MSO2000B)

*Optional

DPO2AUTO: CAN and LIN

DPO2COMP: RS-232/422/485/

UART

DPO2EMBD: I 2 C, SPI

USB Host, USB Device, GPIB*

Optional DPO2CONN Module,

LAN (10/100 Base-T Ethernet) and

Video Out

*Optional

2.5 GS/s (analog);

121.2 ps (8.25 GS/s) MagniVu

(digital)

5 Mpoints

2.5 GS/s to 5 GS/s (analog);

60.6 ps (16.5 GS/s) MagniVu

(digital)

Up to 20 Mpoints

Edge, Sequence, Logic, Pulse

Width, Runt, Timeout, Set-up and

Hold, Rise/Fall Time, Video,

Extended Video*, I

2

C*, SPI*, CAN*,

LIN*, FlexRay*, RS-232/422/485/

UART*, I

2

S/LJ/RJ/TDM*,

MIL-STD-1553*, Parallel

(MSO3000)

*Optional

Edge, Sequence, Logic, Pulse

Width, Runt, Timeout, Set-up and

Hold, Rise/Fall Time, Video,

Extended Video*,I

2

C*, SPI*, USB*,

Ethernet*,CAN*, LIN*, FlexRay*,

RS-232/422/485/UART*, I

2

S/LJ/

RJ/TDM*, MIL-STD-1553*, Parallel

(MSO4000B)

*Optional

DPO3AERO: MIL-STD-1553

DPO3AUDIO: I 2 S, LJ, RJ, TDM

DPO3AUTO: CAN and LIN

DPO3COMP: RS-232/422/485/

UART

DPO3EMBD: I

2

C, SPI

DPO3FLEX: FlexRay

USB Host (x2), USB Device,

LAN (10/100 Base-T Ethernet),

Video Out, GPIB*

*Optional

DPO4AERO: MIL-STD-1553

DPO4AUDIO: I 2 S, LJ, RJ, TDM

DPO4AUTO: CAN and LIN

DPO4AUTOMAX: CAN, LIN and FlexRay

DPO4COMP: RS-232/422/485/

UART

DPO4EMBD: I

2

C, SPI

DPO4ENET: Ethernet

DPO4USB: USB

USB Host (x4), USB Device,

LAN (10/100/1000 Base-T

Ethernet, LXI Class C Compliant),

Video Out, GPIB*

*Optional

2.5 GS/s to 5 GS/s (analog);

60.6 ps (16.5 GS/s) MagniVu

(digital)

20 Mpoints

RF Power Level, Edge, Sequence,

Logic, Pulse Width, Runt, Timeout,

Set-up and Hold, Rise/Fall Time, Video,

Extended Video*, I

2

C*, SPI*, USB*,

Ethernet*, CAN*, LIN*, FlexRay*,

RS-232/422/485/UART*, I

2

S/LJ/

RJ/TDM*, MILSTD-1553*, Parallel

*Optional

**With optional MDO4TRIG module, RF power level can be used as source for Pulse

Width, Timeout, Runt, Logic, Sequence

DPO4AERO: MIL-STD-1553

DPO4AUDIO: I 2 S, LJ, RJ, TDM

DPO4AUTO: CAN and LIN

DPO4AUTOMAX: CAN, LIN and FlexRay

DPO4COMP: RS-232/422/485/

UART

DPO4EMBD: I

2

C, SPI

DPO4ENET: Ethernet

DPO4USB: USB

USB Host (x4), USB Device,

LAN (10/100/1000 Base-T

Ethernet, LXI Class C Compliant),

Video Out, GPIB*

*Optional

29 Automated Measurements,

Waveform and Screen Cursors,

Arithmetic Waveform Math, FFT

PC communications software:

OpenChoice

®

Desktop

29 Automated Measurements,

Waveform and Screen Cursors,

Arithmetic and Advanced

Waveform Math, FFT,

Measurement Statistics

Optional:

DPO3PWR: Power Analysis

DPO3VID: HDTV and Custom

Triggering

PC Communications Software:

OpenChoice

®

Desktop,

NI LabVIEW Signal Express

Tektronix Edition LE

41 Automated Measurements,

Waveform and Screen Cursors,

Arithmetic and Advanced

Waveform Math, Measurement

Statistics, Waveform Histograms

Optional:

DPO4LMT: Limit and Mask

Testing

DPO4PWR: Power Analysis

DPO4VID: HDTV and Custom

Triggering

PC Communications Software:

OpenChoice

®

Desktop,

NI LabVIEW Signal Express

Tektronix Edition LE

44 Automated Measurements,

Waveform and Screen Cursors,

Arithmetic Waveform Math,

Spectrum Math, FFT, Advanced

Math, Measurement Statistics,

Waveform Histograms

Optional:

DPO4LMT: Limit and Mask

Testing; MDO4TRIG: Adv. RF

Power Level Trigger; DPO4PWR:

Power Analysis; DPO4VID: HDTV and Custom Triggering

PC Communications Software:

OpenChoice

®

Desktop,

NI LabVIEW Signal Express

Tektronix Edition LE. Vector Signal

Analysis Software: SignalVu-PC

--

$1,290

--

$3,380

--

$7,150

--

$12,220

Performance Oscilloscopes Selection

Performance Oscilloscopes

Tektronix performance oscilloscopes give you the cleanest, most trustworthy signal in the world. Discover signal fidelity issues fast with patented DPX

® acquisition technology and reliably capture complex events with the advanced

Pinpoint

®

triggering system. Quickly navigate through long record lengths with an intuitive Search and Mark capability and accelerate your design validation efforts with more than 30 different software analysis packages.

Channels

Bandwidth

MSO/DPO5000

4 analog channels;

16 digital channels (MSO5000)

350 MHz to 2 GHz

DPO7000C Series

4 analog channels

500 MHz to 3.5 GHz

Sample Rate

Max Record Length

Trigger Types

5 GS/s to 10 GS/s (analog);

60.6 ps (16.5 GS/s) MagniVu

(digital)

10 GS/s to 40 GS/s (analog)

Up to 250 Mpoints

Edge, Sequence, Logic, Pulse Width, Glitch,

Runt, Timeout, Transition, Set-up and Hold,

Rise/Fall Time, Video, I

2

C*, SPI*, USB (Low,

Full, High)*, RS-232/422/485/UART*, Parallel

(MSO5000), Visual Trigger*

*Optional

Up to 500 Mpoints

Pinpoint

Triggering, Edge, Glitch, Pulse Width,

Runt, Time-out, Transition. Setup/Hold, Pattern,

State, Window, Trigger Delay (by Time and by

Event), I 2 C*, SPI*, USB (Low, Full)*, RS-

232/422/485/UART*, Visual Trigger*

*Optional

Additional Resources Key

Product Demo

Product Explorer

Data Sheet

Technical Content

Optional Serial Bus

Decode and Analysis

Connectivity

SR-ENET: 10/100Base-T Ethernet

SR-AERO: Aerospace (MIL-STD 1553)

SR-AUTO: Automotive (CAN/LIN/FlexRay)

SR-COMP: RS-232/422/485/UART

SR-CUST: Custom Serial Analysis Kit

SR-DPHY: MIPI D-PHY

SR-EMBD: I

2

C, SPI

SR-PCIE: PCI Express

SR-USB: USB

VNM: CAN, LIN

USB Host (x6), USB Device, LAN (10/100/1000

Base-T Ethernet, LXI Class C Compliant), Video

Out, GPIB*

*Optional

SR-ENET: 10/100Base-T Ethernet

SR-AERO: Aerospace (MIL-STD 1553)

SR-AUTO: Automotive (CAN/LIN/FlexRay)

SR-COMP: RS-232/422/485/UART

SR-CUST: Custom Serial Analysis Kit

SR-DPHY: MIPI D-PHY

SR-EMBD: I

2

C, SPI

SR-PCIE: PCI Express

SR-USB: USB

LSA: CAN, LIN

USB Host (x5), LAN (10/100/1000 Base-T

Ethernet, LXI Class C Compliant), GPIB, eSATA,

DVI

Waveform Math and Analysis

53 Automated Measurements, Waveform and

Screen Cursors, Arithmetic and Advanced

Waveform Math, FFT, Measurement Statistics,

Waveform Histograms

Optional:

DDRA: DDR Memory Bus Analysis;

DJA: DPOJET Advanced Jitter and Eye Diagram

Analysis; ET3: Ethernet Compliance Test

Solution; LT: Waveform Limit Testing; MTM:

Mask Testing; PWR: Power Analysis; SignalVu

Vector Signal Analysis; USB: USB Compliance

Test Solution; VET: Visual Triggering; MOST:

MOST 50/150 Compliance Test Solution

53 Automated Measurements, Waveform and

Screen Cursors, Arithmetic and Advanced

Waveform Math, FFT, Measurement Statistics,

Waveform Histograms

Optional:

DDRA: DDR Memory Bus Analysis;

DJA: DPOJET Advanced Jitter and Eye Diagram

Analysis; ET3: Ethernet Compliance Test

Solution; LT: Waveform Limit Testing; MTM:

Mask Testing; PWR: Power Analysis; SignalVu

Vector Signal Analysis; USB: USB Compliance

Test Solution; VET: Visual Triggering; MOST:

MOST 50/150 Compliance Test Solution

Software PC Communications Software: NI LabVIEW

Signal Express

Tektronix Edition LE

Battery Operation

Starting Price

Additional Resources

--

$12,000

PC Communications Software: NI LabVIEW

Signal Express

Tektronix Edition LE

--

$18,300

Tektronix

Reference Library

With over 20,000 items in our premium content library, it is likely you can find answers on our website to whatever questions you have. Here is a list of our most popular downloaded content for oscilloscopes.

Visit www.tektronix.com to download your copy.

1. XYZs of Oscilloscopes

Primer

2. ABCs of Probes Primer

3. Fundamentals of Signal

Integrity Primer

4. Debugging Serial Buses in Embedded Systems

Designs Application Note

5. Power Supply

Measurement and

Analysis Primer

www.tektronix.com

7

Oscilloscopes

Product Highlights

Up to 1 GS/s sample rate on all channels

16 automated measurements, and FFT analysis

Built-in waveform limit testing

Built-in help system and probe check wizard

Front-panel USB host port and rear-panel USB device port

Qualifies for Education Discount

Accurately capture signals with at least 10X oversampling on all channels with Digital Real-Time

Sampling technology.

TBS1000 Series

Usually, entry-level instruments are as light in features as they are in price. But Tektronix

TBS1000 Series aren't usual instruments. Ideal for students, hobbyists or any person or organization on a tight budget, TBS1000 Series oscilloscopes deliver outstanding performance, including best-in-class digital real-time sampling, pass/fail testing, and familiar, easy-to-use controls. All at a price that's equally impressive.

Quickly store and transfer your waveforms and settings with the front panel USB port.

Models

TBS1022

TBS1042

TBS1062

TBS1102

TBS1152

Analog Channels

2

2

2

2

2

Recommended Probes

Passive Voltage Probes

TPP0201

TPP0101

10X, 200 MHz, 300 V

CAT II

10X, 100 MHz, 300 V

CAT II

P2220 10X/1X, 200 MHz/6

MHz, 300 V CAT II/150

V CAT II

High Voltage Probes

P5200A

P5100A

P6015A

500X/50X, 50 MHz,

± 1300 V/± 130 V

100X, 500 MHz,

2500 V Peak

1000X, 75 MHz,

20 kV Peak

$81

$66

$127

$945

$945

$1,880

Analog Bandwidth

25 MHz

40 MHz

60 MHz

100 MHz

150 MHz

Recommended Probes

Current Probes

P6021

P6022

A621

A622

60 MHz, 10.6 A

RMS/250 A Peak/10 mA Min

120 MHz, 4 A

RMS/100 A Peak/1 mA Min

5 Hz to 50 kHz, 1000 A

RMS/2000 A Peak/10 mA Min

100 kHz, 100 A DC/71

A RMS/100 A Peak/10 mA Min

$1,570

$1,680

$628

$634

TCP2020 50 MHz, 20 A DC/20

A RMS/100 A Peak/10 mA Min

$2,610

Recommended Accessories

1103 TEKPROBE Power

Supply

$2,280

AC2100 Soft Carrying Case $130

Analog Sample Rate

500 MS/s

500 MS/s

1.0 GS/s

1.0 GS/s

1.0 GS/s

Another Product for Consideration

Need 4 channels? The TDS2000C Series offers the same great performance as the TBS1000 on both 2- and 4-channel models, and includes a Lifetime Warranty.

Ships with Product

Two TPP0x01 100 MHz or 200 MHz, 10X Passive

Probes

OpenChoice ® Desktop Software

Educator Classroom and Lab Resource CD

Calibration Certificate, Quick Reference Manual,

& Documentation on CD

Power Cord

5-year Warranty

Help your students master the use of an oscilloscope with the included classroom labs and resources.

Recommended Service

SILV200 5-year Extended

Warranty

$260

Pricing (USD)

$520

$680

$830

$1,100

$1,520

8 www.tektronix.com/tbs1000

Oscilloscopes

Product Highlights

10x oversampling on all channels

Bright color display

16 automated measurements and FFT analysis

Built-in help system and probe check wizard

Front-panel USB host port and rear-panel USB device port

Lifetime Warranty

*2

Accurately capture signals with at least 10X oversampling on all channels with

Digital Real-Time Sampling technology.

TDS2000C Series

Big performance has never been so small. Featuring Digital Real-Time Sampling, you can trust your scope to accurately capture your signal. Add in USB connectivity, 16 automated measurements and even a built-in help system, this compact oscilloscope helps you get more done in less time. It’s true: big things do come in small packages.

Easily check if your waveforms pass or fail your specifications with built-in waveform limit testing.

Models

TDS2001C

TDS2002C

TDS2004C

TDS2012C

TDS2014C

TDS2022C

TDS2024C

Analog Channels

2

4

2

4

2

2

4

Recommended Probes

Passive Voltage Probes

TPP0201

TPP0101

10X, 200 MHz, 300 V

CAT II

10X, 100 MHz, 300 V

CAT II

P2220 10X/1X, 200 MHz/6

MHz, 300 V CAT II/150

V CAT II

High Voltage Probes

$81

$66

$127

P5200A

P5100A

500X/50X, 50 MHz,

± 1300 V/± 130 V

100X, 500 MHz,

2500 V Peak

$945

$945

P6015A 1000X, 75 MHz,

20 kV Peak

$1,880

*1

For complete details visit www.tektronix.com/lifetimewarranty

Analog Bandwidth

50 MHz

70 MHz

70 MHz

100 MHz

100 MHz

200 MHz

200 MHz

Recommended Probes

Current Probes

P6021

P6022

A621

A622

60 MHz, 10.6 A

RMS/250 A Peak/10 mA Min

120 MHz, 4 A

RMS/100 A Peak/1 mA Min

5 Hz to 50 kHz, 1000 A

RMS/2000 A Peak/10 mA Min

100 kHz, 100 A DC/71

A RMS/100 A Peak/10 mA Min

$1,570

$1,680

$628

$634

TCP2020 50 MHz, 20 A DC/20

A RMS/100 A Peak/10 mA Min

$2,610

Recommended Accessories

1103 TEKPROBE Power

Supply

$2,280

AC2100 Soft Carrying Case $130

Analog Sample Rate

500 MS/s

1.0 GS/s

1.0 GS/s

2.0 GS/s

2.0 GS/s

2.0 GS/s

2.0 GS/s

Another Product for Consideration

If you work with serial or parallel buses, the

MSO/DPO2000B Series offers trigger, decode and search options for common protocols.

Ships with Product

One TPP0x01 100 MHz or 200 MHz, 10X Passive

Probe Per Analog Channel

OpenChoice

®

Desktop and NI LabVIEW

SignalExpress

TE (LE version) Software

Calibration Certificate, Quick Reference Manual &

Documentation on CD

Power Cord

Lifetime Warranty *1

2011 Winner of the

EETimes Annual

Creativity in

Electronics

(ACE) Award

Recommended Service

SILV200 5-year Extended

Warranty

$260

Pricing (USD)

$890

$1,080

$1,640

$1,300

$1,950

$1,850

$2,280 www.tektronix.com/tds2000 9

Oscilloscopes

Product Highlights

10x oversampling on all channels

4 isolated analog channels

11 automated measurements and FFT analysis

Optional power analysis software

Safely and easily make floating measurements with the four isolated channels.

Battery pack gives you up to 4 hours of portable operation. Hot-swap the pack for 4 more hours!

TPS2000B Series

Great performance goes beyond the lab. This compact, battery-powered oscilloscope packs big-time performance and versatility. Make floating or differential measurements with up to four isolated channels. Tackle tough electronics and power systems in challenging environments with backlit buttons and optional power analysis software. Accurately capture your signals with Digital Real-Time Sampling. Huge performance. Small footprint.

Models

TPS2012B

TPS2014B

TPS2024B

Application Modules

TPS2PBND2 TPS2PWR1 Module and Four P5122

Probes

$1,550

TPS2PWR1 Power Measurement and Analysis Module

$670

Recommended Accessories

1103 TEKPROBE Power

Supply

$2,280

AC2100

TPSBAT

TPSCHG

Soft Carrying Case

Additional Lithium-Ion

Battery Pack (one included standard with instrument)

External Battery

Charger

$130

$292

$507

Recommended Service

SILV200 5-year Extended

Warranty

$260

Analog Channels

2

4

4

Analog Bandwidth

100 MHz

100 MHz

200 MHz

Recommended Probes

Passive Voltage Probes

TPP0201

TPP0101

10X, 200 MHz, 300 V

CAT II

10X, 100 MHz, 300 V

CAT II

P2220 10X/1X, 200 MHz/6

MHz, 300 V CAT II/150

V CAT II

High Voltage Probes

P5150 50X, 500 MHz, 2500

V Peak, 1000 V RMS

CAT II

P5122 100X, 200 MHz,

1000 V RMS CAT II

Current Probes

P6021

P6022

A621

A622

TCP2020

60 MHz, 10.6 A

RMS/250 A Peak/10 mA Min

120 MHz, 4 A

RMS/100 A Peak/1 mA Min

5 Hz to 50 kHz, 1000 A

RMS/2000 A Peak/10 mA Min

100 kHz, 100 A DC/71

A RMS/100 A Peak/10 mA Min

50 MHz, 20 A DC/20

A RMS/100 A Peak/10 mA Min

$81

$66

$127

$500

$278

$1,570

$1,680

$628

$634

$2,610

Analog Sample Rate

1.0 GS/s

1.0 GS/s

2.0 GS/s

Pricing (USD)

$2,990

$3,950

$4,480

Another Product for Consideration

For very accurate low frequency voltage and current measurements, the DMM Series offers up to 0.0024% basic DC voltage accuracy.

Ships with Product

One TPP0101 100 MHz, 10X Passive Probe Per

Analog Channel (TPS2012B & TPS2014B)

One TPP0201 200 MHz, 10X Passive Probe Per

Analog Channel (TPS2024B)

OpenChoice

®

Desktop and NI LabVIEW

SignalExpress

TE (LE version) Software

RS-232 to USB Adapter Cable

One Lithium-Ion Battery with 4-hour Battery Life

Calibration Certificate, Quick Reference Manual,

& Documentation on CD

Front Panel Cover, AC Adapter with Power Cord

3-year Warranty

Learn more with the

“Fundamentals of

Floating Measurements and Isolated Input

Oscilloscopes” application note.

Fundamentals of Floating Measurements and Isolated Input Oscilloscopes

Application Note

This guide will provide you with a fundamental glossary of power measurement terms, explain the different options available for making floating measurements, and highlight the advantages and trade-offs of each option.

The most demanding floating measurement requirements are found in power control circuits, such as motor controllers, uninterruptible power supplies, and industrial equipment. In such application areas, voltages and currents may be large enough to present a hazard to users and/or test equipment.

When measuring floating high voltage signals there are many options to consider. Each option has its advantages and trade-offs.

10 www.tektronix.com/tps2000

Oscilloscopes

Product Highlights

4 fully isolated and floating channels

21 automated measurements

600 VRMS CAT III, 1000 VRMS CAT II rated inputs

Measurement data logging with TrendPlot

7 hours of continuous battery operation

Four isolated input channels easily handle any type of mixed signal inputs.

THS3000 Series

Affordable performance in a rugged, portable design. This handheld, battery-powered oscilloscope is packed with features and analysis tools. With up to 5 GS/s sampling rate and four isolated channels that can measure up to 1000 Volts you can quickly, reliably and accurately evaluate your signal characteristics on the bench or in the field.

User-defined limit testing can automatically monitor your signals and output

Pass or Fail results.

Models

THS3014

THS3014-TK

THS3024

THS3024-TK

Analog Channels

4

4

4

4

Recommended Probes

Passive Voltage Probes

THP0301 -

Y/B/M/G

300 MHz, 10X,

300 V CAT III

High Voltage Probes

P5150

*1

50X, 500 MHz, 2500

V Peak, 1000 V RMS

CAT II

P5122 100X, 200 MHz,

1000 V RMS CAT II

Current Probes

P6021

P6022

A621

A622

60 MHz, 10.6 A

RMS/250 A Peak/10 mA Min

120 MHz, 4 A

RMS/100 A Peak/1 mA Min

5 Hz to 50 kHz, 1000 A

RMS/2000 A Peak/10 mA Min

100 kHz, 100 A DC/71

A RMS/100 A Peak/10 mA Min

$183

$500

$278

$1,570

$1,680

$628

$634

TCP2020 50 MHz, 20 A DC/20

A RMS/100 A Peak/10 mA Min

$2,610

*1

The P5150 is compatible with THS oscilloscopes, but 50X vertical scaling is not offered.

Analog Bandwidth

100 MHz

100 MHz

200 MHz

200 MHz

Recommended Accessories

THSBAT Additional Spare

Battery

$312

THSCHG *2 Battery Charger $104

119-7900-00 AC Power Adapter

*2 Does not include AC power adapter.

Recommended Service

SILV400 5-year Extended

Warranty

$280

$415

Analog Sample Rate

2.5 GS/s

2.5 GS/s

5.0 GS/s

5.0 GS/s

Pricing (USD)

$4,110

$4,550

$4,650

$5,100

Another Product for Consideration

For very accurate ripple measurements on high voltage signals, the P5122 probe offers high impedance with minimal capacitive loading.

Ships with Product

Four THP0301-Y/B/M/G 300 V CAT III, 300 MHz 10X

Passive Probes

OpenChoice

®

Desktop Software

USB-A to Mini USB-B Cable for PC Communication

Lithium-ion Battery with 7 Hour Battery Life

Calibration Certificate, Installation/Safety Manual,

Documentation on CD

Carrying Handle, Hanging Strap

ACHHS Soft-sided Carry Case

*3

, AC Power Adapter with Power Cord

Hard-sided Travel Case

*4

Soft-sided Probe Case, Two Probe Replacement

Accessory Kits *4

3-year Warranty

*3

Non-TK models only,

*4

TK models only

Learn more with the

“Fundamentals of

Floating Measurements and Isolated Input

Oscilloscopes” application note.

Fundamentals of Floating Measurements and Isolated Input Oscilloscopes

Application Note

This guide will provide you with a fundamental glossary of power measurement terms, explain the different options available for making floating measurements, and highlight the advantages and trade-offs of each option.

The most demanding floating measurement requirements are found in power control circuits, such as motor controllers, uninterruptible power supplies, and industrial equipment. In such application areas, voltages and currents may be large enough to present a hazard to users and/or test equipment.

When measuring floating high voltage signals there are many options to consider. Each option has its advantages and trade-offs.

www.tektronix.com/ths3000 11

Oscilloscopes

Product Highlights

10 kpoints record length on all channels, all the time

3,600 wfm/s max. waveform capture rate with DPO technology

25 automated measurements and FFT analysis

Front-panel USB host port and optional rear-panel

Ethernet, GPIB, and RS-232 ports

Optional battery pack gives you up to 3 hours of portable operation.

TDS3000C Series

Performance meets portability. Featuring up to 500 MHz bandwidth and optional batterypowered operation, this oscilloscope is as capable as it is convenient. Capture fastchanging signals with Digital Real-Time Sampling. Maximize efficiency with WaveAlert

®

Anomaly Detection and 25 automated measurements. Performance and versatility. Turns out, you can take it with you.

Accurately capture signals with at least 5X oversampling on all channels with

Digital Real-Time Sampling technology.

Models

TDS3012C

TDS3014C

TDS3032C

TDS3034C

TDS3052C

TDS3054C

Application Modules

TDS3LIM Limit Testing

TDS3TMT

TDS3VID

Telecom Mask Test

Triggering

HDTV and Custom

Video Triggering

$765

$1,430

$765

Recommended Accessories

1103 TEKPROBE Power

Supply

$2,280

$765 TDS3GV GPIB, RS-232, and

VGA Communications

Module

TDS3BATC Lithium-ion Battery $637

TDS3ION Battery Charger $159

AC3000 Soft Carrying Case

HCTEK4321 Hard Carrying Case

(requires AC3000)

$249

$796

Recommended Service

SILV400 5-year Extended

Warranty

Analog Channels

4

2

4

2

4

2

Recommended Probes

Passive Voltage Probes

P6139B 10X, 500 MHz, 300 V

CAT II

Active Voltage Probes

P6243 10X, 1 GHz, ± 8 V

Differential Voltage Probes

P6246

*1

10X/1X, 400 MHz,

± 8.5 V/± 850 mV

High Voltage Probes

P5205A

P5210A

500X/50X, 100 MHz,

± 1300 V/± 130 V

1000X/100X, 50 MHz,

± 5600 V/± 560 V

P5100A 100X, 500 MHz, 2500

V Peak

Current Voltage Probes

TCP202A 50 MHz, 15 A DC/10.6

A RMS/50 A Peak/10 mA Min

*1

Requires 1103 TEKPROBE Power Supply

$435

$1,080

$3,470

$1,390

$2,780

$945

$2,260

$415

Analog Bandwidth

100 MHz

100 MHz

300 MHz

300 MHz

500 MHz

500 MHz

Analog Sample Rate

1.25 GS/s

1.25 GS/s

2.5 GS/s

2.5 GS/s

5 GS/s

5 GS/s

Pricing (USD)

$5,080

$6,220

$7,500

$8,930

$10,800

$12,800

Another Product for Consideration

If you work with serial or parallel buses, the

MSO/DPO3000 Series offers trigger, decode and search options for common protocols.

Ships with Product

One P6139B 500 MHz, 10X Passive Probe Per Analog

Channel

OpenChoice

®

Desktop and NI LabVIEW

SignalExpress

TE (LE version) Software

Calibration Certificate, Quick Reference Manual,

& Documentation on CD

Front Panel Cover, Power Cord

3-year Warranty

Learn more about

Digital Real-Time

Sampling with the

“Be Sure to Capture the Complete Picture” application note.

Be Sure to Capture the Complete Picture

Technical Brief

Sampling Technology

As an engineer or technician, you need the confidence and trust that you’re accurately capturing the details of your signal.

If an oscilloscope’s sample rate isn’t fast enough, signal details are lost, resulting in missing data and measurement errors. capturing enough samples of the signal needed to faithfully reconstruct a waveform in a single acquisition cycle.

The Solution…

Digital Real-time (DRT)

Sampling Technology

Input 1

Waveform Constructed with Record Points

Sampling RateSampling Rate

Input 2

12 www.tektronix.com/tds3000

Oscilloscopes

Product Highlights

1 Mpoint record length on all channels

5,000 wfm/s max. waveform capture rate with DPO technology

Over 125 available trigger combinations, including setup/hold, serial packet and parallel data

Automated search and easy waveform navigation with

Wave Inspector ®

29 automated measurements and FFT analysis

5-year warranty

Quickly pan/zoom and automatically search your waveforms with Wave

Inspector

®

.

MSO/DPO2000B Series

Test more, spend less with an oscilloscope that’s packed with features and is also light on price. Measure as many as 20 channels of analog and digital signals. Speed debug with automated serial and parallel bus analysis. Search your entire record instantly with Wave

Inspector

®

. Entry level has never been so powerful.

Automatically trigger, decode and search your serial buses with optional analysis modules.

Models

DPO2002B

MSO2002B

DPO2004B

MSO2004B

DPO2012B

MSO2012B

DPO2014B

MSO2014B

DPO2022B

MSO2022B

DPO2024B

MSO2024B

Application Modules

Serial Bus Triggering and Protocol Analysis

DPO2AUTO Automotive (CAN, LIN) $350

DPO2COMP Computer (RS-232) $350

DPO2EMBD Embedded (I 2 C, SPI) $350

Analog Channels

4

4

2

2

2

2

4

2

4

4

2

4

Recommended Accessories

DPO2CONN Ethernet and Video Out

Connectivity Module

$425

119-7465-xx TekVPI External Power

Supply

ACD2000 Soft Carrying Case

Recommended Service

SILV200 5-year Extended

Warranty

$82

$249

$260

Digital Channels

--

16

--

16

--

16

--

16

--

16

--

16

Recommended Probes

Passive Voltage Probes

TPP0200 10X, 200 MHz, 300 V

CAT II

Active Voltage Probes

TAP1500 10X, 1.5 GHz, ± 8 V

Differential Voltage Probes

$2620

$2140

TDP0500 *1 50X/5X, 500 MHz,

± 42 V/± 4.25 V

High Voltage Probes

THDP0200

*1

500X/50X, 200 MHz,

± 1500 V/± 150 V

TMDP0200

*1

250X/25X, 200 MHz,

± 750 V/± 75 V

THDP0100

*1

1000X/100X, 100 MHz,

± 6000 V/± 600 V

$3,430

$1,730

$1,730

$2,960

Current Probes

TCP0020 50 MHz, 20 A DC

TCP0030

*1

120 MHz, 30 A DC

TCP0150

*1

20 MHz, 150 A DC

*1

Requires 119-7465-xx TekVPI External Power Supply

$2,460

$3,460

$4,090

Analog Bandwidth Analog Sample Rate Pricing (USD)

70 MHz

70 MHz

70 MHz

70 MHz

100 MHz

100 MHz

100 MHz

100 MHz

200 MHz

200 MHz

200 MHz

200 MHz

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

1 GS/s

$1,290

$2,140

$1,970

$2,810

$1,620

$2,460

$2,370

$3,170

$2,280

$3,130

$2,810

$3,650

Another Product for Consideration

Need more bandwidth? The MSO/DPO3000 Series offers up to 500 MHz analog bandwidth and additional performance.

Ships with Product

One TPP0100 100MHz, 10X Passive Probe Per

Analog Channel (70 MHz model)

One TPP0200 200 MHz, 10X Passive Probe Per

Analog Channel (100 MHz & 200 MHz models)

One P6316 16 Channel Logic Probe (MSO only)

OpenChoice

®

Desktop Software

Calibration Certificate, Quick Reference Manual

& Documentation on CD, Power Cord

5-year Warranty

“It combines scope, logic analyzer, and protocol analyzer features into an easy-to-use, portable package. The mixed signal functionality, serial decode, small-footprint, and affordable price provide compelling value.”

Alfred Mora

Electrical Engineer, Datalogic Scanning, Inc.

www.tektronix.com/mso2000 13

Oscilloscopes

Product Highlights

5 Mpoint record length on all channels

>50,000 wfm/s max. waveform capture rate with DPO technology

Over 125 available trigger combinations, including setup/hold, serial packet and parallel data

Automated search and easy waveform navigation with

Wave Inspector

®

29 automated measurements and FFT analysis

Analyze your digital signals with up to 121.2 ps timing resolution with MagniVu

(MSO Series).

MSO/DPO3000 Series

Looking for an all-purpose oscilloscope? Look no further. Measure up to 20 channels of analog and digital signals with one instrument. Save time with automated measurements, and built-in serial and parallel bus analysis. Instantly search your entire record with Wave

Inspector

®

. Efficiency. Versatility. Performance. One oscilloscope.

Automatically trigger, decode and search your serial buses with optional analysis modules.

Models

DPO3012

MSO3012

DPO3014

MSO3014

DPO3032

MSO3032

DPO3034

MSO3034

DPO3052

DPO3054

MSO3054

4

4

2

4

4

2

2

4

4

2

2

Analog

Channels

Application Modules

Serial Bus Triggering and Protocol Analysis

DPO3AERO Aerospace

(MIL-STD-1553)

$1,100

DPO3AUDIO Audio (I

2

S, LJ, RJ and

TDM)

$1,100

DPO3AUTO Automotive (CAN, LIN) $1,100

DPO3COMP Computer (RS-232)

DPO3EMBD Embedded (I

2

C, SPI)

DPO3FLEX Automotive (FlexRay)

Additional Analysis

DPO3PWR Power Analysis

DPO3VID HDTV and Custom

Video Triggering

$1,100

$1,100

$1,100

$1,370

$695

Recommended Accessories

ACD4000 Soft Carrying Case $247

Recommended Service

SILV400 5-year Extended

Warranty

14 www.tektronix.com/mso3000

$415

--

16

--

--

16

--

16

--

16

Digital

Channels

--

16

Analog

Bandwidth

100 MHz

100 MHz

100 MHz

100 MHz

300 MHz

300 MHz

300 MHz

300 MHz

500 MHz

500 MHz

500 MHz

Recommended Probes

Passive Voltage Probes

P6139B 10X, 500 MHz, 300 V

CAT II

Differential Voltage Probes

TDP0500 50X/5X, 500 MHz,

± 42 V/± 4.25 V

TDP1000 50X/5X, 1 GHz,

± 42 V/± 4.25 V

High Voltage Probes

$435

$3,430

$4,840

TMDP0200 250X/25X, 200 MHz,

± 750 V/± 75 V

THDP0200 500X/50X, 200 MHz,

± 1500 V/± 150 V

$1,730

$1,730

THDP0100 1000X/100X, 100 MHz,

± 6000 V/± 600 V

$2,960

P5100A 100X, 500 MHz, 2500

V Peak

Current Probes

TCP0020

TCP0030

TCP0150

50 MHz, 20 A DC

120 MHz, 30 A DC

20 MHz, 150 A DC

$2,460

$3,460

$4,090

Analog Sample

Rate

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

Digital Sample Rate

Main/MagniVu

Pricing (USD)

-$3,380

500 MS/s / 8.25 GS/s $4,800

-$4,050

500 MS/s / 8.25 GS/s $5,500

-$6,380

500 MS/s / 8.25 GS/s $8,520

-$7,680

500 MS/s / 8.25 GS/s $10,300

-$8,600

-$10,500

500 MS/s / 8.25 GS/s $13,700

Ships with Product

One P6139B 500 MHz, 10X TekVPI Passive Probe Per

Analog Channel

One P6316 16 Channel Logic Probe (MSO only)

OpenChoice

®

Desktop and NI LabVIEW

SignalExpress

TE (LE version) Software

Calibration Certificate, Quick Reference Manual

& Documentation on CD

Front Panel Cover, Power Cord

3-year Warranty

Upgrade the bandwidth of your

MSO/DPO3000 Series any time after your purchase up to

500 MHz, ensuring your scope can grow with your needs.

Oscilloscopes

Product Highlights

Up to 20 Mpoint record length on all channels

>50,000 wfm/s max. waveform capture rate with

DPO technology

Over 125 available trigger combinations, including setup/hold, serial packet and parallel data

Automated search and easy waveform navigation with Wave Inspector

®

41 automated measurements and FFT analysis

Ships with one passive probe per analog channel, with up to 1 GHz bandwidth and an industry-best 3.9 pF of capacitive loading.

MSO/DPO4000B Series

Debug complex designs faster with an oscilloscope that’s as versatile as it is powerful.

Measure up to 20 channels of analog and digital signals. Analyze serial and parallel buses.

Instantly search your entire record with the time-saving Wave Inspector

®

. Finally, an oscilloscope that multitasks as well as you do.

Automatically trigger, decode and search your serial and parallel bus.

Models

DPO4014B

MSO4014B

DPO4034B

MSO4034B

DPO4054B

MSO4054B 4

DPO4102B-L 2

DPO4102B 2

4

4

4

4

Analog

Channels

4

DPO4104B-L 4

DPO4104B 4

MSO4102B-L 2

MSO4102B 2

MSO4104B-L 4

MSO4104B 4

Application Modules

Serial Bus Triggering and Analysis

DPO4AERO Aerospace

(MIL-STD 1553)

DPO4-

AUDIO

*1

Audio (I 2

TDM)

S, LJ, RJ and

$1,610

$1,450

DPO4AUTO Automotive (CAN, LIN) $1,450

DPO4-

AUTOMAX

Automotive (CAN, LIN,

FlexRay)

DPO4COMP Computer (RS-232)

$5,040

$1,450

DPO4EMBD *2 Embedded (I 2 C, SPI)

DPO4ENET Ethernet (10Base-T,

100Base-Tx)

DPO4USB

*3

USB 2.0 (LS, FS, HS)

$1,450

$1,610

$1,610

DPO4PWR Power Analysis $1,800

DPO4LMT Limit and Mask Testing $888

DPO4VID HDTV & Custom Video

Triggering

$888

--

--

16

16

16

16

Digital

Channels

--

16

--

16

--

16

--

--

Bandwidth

100 MHz

100 MHz

350 MHz

350 MHz

500 MHz

500 MHz

1 GHz

1 GHz

1 GHz

1 GHz

1 GHz

1 GHz

1 GHz

1 GHz

Recommended Probes

Passive Voltage Probes

TPP0502 2X, 500 MHz, 300 V

CAT II

Active Voltage Probes

TAP1500 10X, 1.5 GHz, ± 8 V

Differential Voltage Probes

TDP0500 50X/5X, 500 MHz,

± 42 V/± 4.25 V

TDP1000 50X/5X, 1 GHz,

± 42 V/± 4.25 V

High Voltage Probes

TMDP0200 250X/25X, 200 MHz,

± 750 V/± 75 V

TPP0850 50X, 800 MHz, 2500

V Peak

Current Probes

TCP0030 120 MHz, 30 A DC

Recommended Service

SILV600 5-year Extended

Warranty

5M

20M

5M

20M

5M

20M

Record

Length (Max)

20M

20M

20M

20M

20M

20M

5M

20M

Analog Sample

Rate (Max)

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

2.5 GS/s

5 GS/s

5 GS/s

5 GS/s

5 GS/s

5 GS/s

5 GS/s

5 GS/s

5 GS/s

Digital Sample Rate

Main/MagniVu

--

Pricing

(USD)

$7,150

500 MS/s /16.5 GS/s $9,500

-- $10,700

500 MS/s /16.5 GS/s $13,600

-- $14,000

500 MS/s /16.5 GS/s $17,400

-- $9,990

-- $12,600

--

--

$13,300

$17,100

500 MS/s /16.5 GS/s $12,800

500 MS/s /16.5 GS/s $16,200

500 MS/s /16.5 GS/s $16,400

500 MS/s /16.5 GS/s $21,500

$609

$2,140

$3,430

$4,840

$1,730

$627

$3,460

$620

Another Product for Consideration

Working with RF? The MDO4000 Series is the world's only oscilloscope with a built-in spectrum analyzer for analyzing analog, digital and RF signals.

Ships with Product

One TPP0500 (

≤ 500 MHz models) or TPP1000

(1 GHz models) Passive Voltage Probe Per Analog

Channel

One P6616 16 Channel Logic Probe (MSO only)

OpenChoice

®

Desktop and NI LabVIEW

SignalExpress

TE (LE version) Software

Calibration Certificate, Quick Reference Manual &

Documentation on CD

Front Panel Cover, Power Cord

3-year Warranty

*1 Not available on DPO4102B, DPO4102B-L models.

*2 For SPI, only 2-wire support is available on DPO4102B, DPO4102B-L.

*3 USB 2.0 HS only available on 1 GHz analog bandwidth models.

www.tektronix.com/mso4000 15

1

Time Domain Display

2

Frequency Domain Display

„

Find the right scope for your project and budget at

www.scoperevolution.com.

16 www.tektronix.com

Oscilloscopes

Product Highlights

The world’s first oscilloscope with a built-in spectrum analyzer

Up to 3 GHz capture bandwidth on the spectrum analyzer input

Integrated spectral analysis tools: automated and manual markers, spectrogram display, RF vs. time traces

Advanced RF power level triggers available

Built on the MSO4000B Series mixed signal oscilloscope platform

Capture time-correlated analog, digital and RF signals.

MDO4000 Series

The new revolutionary oscilloscope with a built-in spectrum analyzer. Capture timecorrelated analog, digital and RF signals for a complete system view of your device. See both time and frequency domains in one glance. View the RF spectrum at any point in time to see how it changes. Quickly and efficiently solve the most complicated design issues—with an oscilloscope as integrated as your designs.

See how your RF spectrum changes over time or device state.

Models

Analog

Channels

MDO4014-3 4

MDO4034-3 4

MDO4054-3 4

MDO4054-6 4

MDO4104-3 4

MDO4104-6 4

16

16

16

16

16

Digital

Channels

16

Analog

Bandwidth

Analog

Sample Rate

100 MHz 2.5 GS/s

350 MHz 2.5 GS/s

500 MHz 2.5 GS/s

500 MHz 2.5 GS/s

1 GHz 5 GS/s

1 GHz 5 GS/s

Digital Sample Rate

Main/MagniVu

500 MS/s /16.5 GS/s 1

Spectrum

Analyzer Input

500 MS/s /16.5 GS/s 1

500 MS/s /16.5 GS/s 1

500 MS/s /16.5 GS/s 1

500 MS/s /16.5 GS/s 1

500 MS/s /16.5 GS/s 1

Spectrum Analyzer

Frequency Range

50 kHz – 3 GHz

50 kHz – 3 GHz

50 kHz – 3 GHz

50 kHz – 6 GHz

50 kHz – 3 GHz

50 kHz – 6 GHz

Pricing

(USD)

$12,220

$16,700

$20,700

$24,200

$25,200

$29,200

Application Modules

Serial Bus Triggering and Protocol Analysis

DPO4AE-

RO

DPO4

AUDIO

Aerospace

(MIL-STD 1553)

Audio (I

TDM)

2

S, LJ, RJ and

$1,610

$1,450

DPO4AUTO Automotive (CAN, LIN) $1,450

$5,040 DPO4-

AUTOMAX

Automotive (CAN, LIN,

FlexRay)

DPO4COMP Computer (RS-232)

DPO4EMBD Embedded (I

2

C, SPI)

DPO4ENET Ethernet (10BASE-T,

100BASE-TX)

DPO4USB *1 USB 2.0 (LS, FS, HS)

$1,450

$1,450

$1,610

$1,610

Additional Analysis

MDO4TRIG Adv. RF Power Level

Triggering

$1,750

DPO4PWR Power Analysis $1,800

DPO4LMT Limit and Mask Testing $888

DPO4VID HDTV & Custom Video

Triggering

$888

*1 USB 2.0 HS only available on 1 GHz analog bandwidth models.

Recommended Service

SILV900 5-year Extended

Warranty

$930

Recommended Probes

Passive Voltage Probes

TPP1000

TPP0500

10X, 1 GHz, 300 V

CAT II

10X, 500 MHz, 300 V

CAT II

TPP0502 2X, 500 MHz, 300 V

CAT II

Active Voltage Probes

TAP1500 10X, 1.5 GHz, ± 8 V

Differential Voltage Probes

TDP0500

TDP1000

50X/5X, 500 MHz,

± 42 V/± 4.2 V

50X/5X, 1 GHz,

± 42 V/± 4.2 V

High Voltage Probes

THDP0200 500X/50X, 200 MHz,

± 1500 V/± 150 V

TPP0850 50X, 800 MHz, 2500

V Peak

Current Probes

TCP0030 120 MHz, 30 A DC

$948

$627

$609

$2,140

$3,430

$4,840

$1,730

$781

$3,460

Ships with Product

Four TPP0500 ( ≤500 MHz models) or TPP1000

(1 GHz models) Passive Voltage Probes

One P6616 16 Channel Logic Probe

N-to-BNC Adapter (103-0045-00)

OpenChoice

®

Desktop and NI LabVIEW

SignalExpress

TE (LE version) Software

Calibration Certificate, Quick Reference Manual

& Documentation on CD

Front Panel Cover, Power Cord

3-year Warranty

2012

“Product of the Year”

Award Winner

- Test & Measurement World www.tektronix.com/mdo4000 17

Oscilloscopes

Product Highlights

Windows 7 Ultimate 64-bit operating system and touch-screen display

>250,000 wfm/s max. waveform capture rate with

FastAcq

technology

Over 350 available trigger combinations, including setup/hold, serial packet and parallel data

Automated search on up to 8 waveform events with

Wave Inspector

®

53 automated measurements and FFT analysis

Ships with four passive probes with up to 1 GHz bandwidth and an industrybest 3.9 pF of capacitive loading.

MSO/DPO5000 Series

The performance you’ve wanted. A price you never thought possible. Measure up to 20 channels of analog and digital signals. Analyze specialty applications with over 10 optional software packages. View up to 16 decoded serial and parallel buses on your display at once. Performance and value. Some engineers have all the luck.

Includes the DPOJET essentials jitter and eye pattern analysis software package - free.

Models

DPO5034

MSO5034

DPO5054

MSO5054

DPO5104

MSO5104

DPO5204

MSO5204

4

4

4

4

4

4

4

Analog

Channels

4

Software Packages

Serial Bus Triggering and Protocol Analysis

SR-AERO MIL-STD-1553B

SR-AUTO CAN/LIN/FlexRay

$2,060

$2,060

SR-COMP Computer (RS-232)

SR-DPHY MIPI D-PHY

SR-EMBD Embedded (I 2 C, SPI)

SR-ENET

SR-PCIE

Ethernet

PCI Express

SR-USB USB 2.0 (LS, FS, HS)

Compliance Test

ET3

MOST

Ethernet

MOST50/150

USB USB 2.0

Additional Analysis

DDRA

DJA

DDR Memory

Advanced Jitter and

Eye Diagram

$5,600

$2,690

$2,860

$6,030

$4,450

PS1, 2, 3 Power Solution Bundles Varies

PWR Power Analysis $3,400

SVE $1,990

VET

SignalVu Essentials -

Vector Signal Analysis

Software

Visual Trigger/Search $2,420

$2,060

$2,060

$2,060

$2,060

$2,060

$2,060

Additional software packages are available. For a complete listing, please visit www.tektronix.com/mso5000

18 www.tektronix.com/mso5000

16

--

16

--

16

--

16

Digital

Channels

--

Analog

Bandwidth

350 MHz

350 MHz

500 MHz

500 MHz

1 GHz

1 GHz

2 GHz

2 GHz

Recommended Probes

Passive Voltage Probes

TPP1000 10X, 1 GHz, 300 V CAT II $948

TPP0502 2X, 500 MHz, 300 V CAT II $609

Active Voltage Probes

TAP1500 10X, 1.5 GHz, ± 8 V $2,140

$3,740 TAP2500 10X, 2.5 GHz, ± 4 V

Differential Voltage Probe

TDP0500 50X/5X, 500 MHz,

± 42 V/± 4.2 V

TDP1000 50X/5X, 1 GHz,

± 42 V/± 4.2 V

TDP1500 10X/1X, 1.5 GHz,

± 8.5 V/± 850 mV

High Voltage Probes

TMDP0200 50X, 800 MHz, 2500 V

Peak

THDP0200 500X/50X, 200 MHz,

± 1500 V/± 150 V

THDP0100 1000X/100X, 100 MHz,

± 6000 V/± 600 V

TPP0850 50X, 800 MHz, 2500 V

Peak

Current Probes

$3,430

$4,840

$5,540

$1,730

$1,730

$2,960

$627

TCP0020 50 MHz, 20 A DC

TCP0030 120 MHz, 30 A DC

TCP0150 20 MHz, 150 A DC

$2,460

$3,460

$4,090

Analog Sample Rate

(4 Channels/2 Channels)

5 GS/s

5 GS/s

5 GS/s

5 GS/s

5 GS/s /10 GS/s

5 GS/s /10 GS/s

5 GS/s /10 GS/s

5 GS/s /10 GS/s

Digital Sample Rate

Main/MagniVu

--

500 MS/s /16.5 GS/s

--

500 MS/s /16.5 GS/s

--

500 MS/s /16.5 GS/s

--

500 MS/s /16.5 GS/s

Pricing (USD)

$12,000

$15,800

$15,600

$19,300

$19,700

$23,400

$25,000

$28,700

Ships with Product

Four TPP0500 (350 MHz and 500 MHz models) or TPP1000 (1 GHz and 2 GHz models)

Passive Voltage Probes

One P6616 16 Channel Logic Probe (MSO only)

NI LabVIEW SignalExpress ™ TE (LE version) Software

Calibration Certificate, Quick Reference Manual

& Documentation on CD

Front Panel Cover, Power Cord

1-year Warranty

Instrument Options

Record Length

Opt. 2RL

Opt. 5RL

25M/Ch

50M/Ch

Opt. 10RL 125M/Ch

Limitations apply. See data sheet for full details.

Recommended Service

R3

R5

3-year Extended Warranty

5-year Extended Warranty

$3,270

$5,450

$11,900

Varies

Varies

Oscilloscopes

DPO7000C Series

Complex designs tremble before this oscilloscope. Packed with features like DPX

® technology for fast waveform capture rates, advanced Pinpoint

®

triggering, and over

15 application software packages, it speeds debug and analysis of performance devices.

It’s a time-strapped engineer’s dream come true.

Product Highlights

500 MHz,1 GHz, 2.5 GHz, and 3.5 GHz models

Windows 7 Ultimate 64-bit operating system and touch-screen display

>250,000 wfm/s max. waveform capture rate with

FastAcq

technology

Over 1400 available trigger combinations with

Pinpoint

®

triggering

Automated search and mark for waveform events

53 automated measurements and FFT analysis

Includes the DPOJET essentials jitter and eye pattern analysis software package - free.

Over 15 optional software packages available for specialized applications.

Models

DPO7054C

DPO7104C

DPO7254C

DPO7354C

Software Packages

Serial Bus Triggering and Protocol Analysis

SR-AERO MIL-STD-1553B

SR-AUTO CAN/LIN/FlexRay

$2,060

$2,060

SR-COMP Computer (RS-232)

SR-DPHY MIPI D-PHY

SR-EMBD Embedded (I

2

C, SPI)

SR-ENET Ethernet

SR-PCIE

SR-USB

PCI Express

USB 2.0 (LS, FS, HS)

Compliance Test

ET3 Ethernet

$2,060

$2,060

$2,060

$2,060

$2,060

$2,060

MOST

USB

MOST50/150

USB 2.0

Additional Analysis

DDRA DDR memory

$5,600

$2,690

$2,860

$6,030

DJA Advanced Jitter and

Eye Diagram

$6,790

PS1, 2, 3 Power Solution Bundles Varies

PWR Power Analysis $3,400

SVE SignalVu RF Analysis $4,080

VET Visual Trigger/Search $3,460

Additional software packages are available. For a complete listing, please visit www.tektronix.com/dpo7000

Analog Channels

4

4

4

4

Bandwidth

500 MHz

1 GHz

2.5 GHz

3.5 GHz

Record Length

(1/2/4 Channels)

50/25/12.5 M

50/25/12.5 M

50/25/12.5 M

50/25/12.5 M

Recommended Probes

Active Voltage Probes

TAP1500 10X, 1.5 GHz, ± 8 V

TAP2500 10X, 2.5 GHz, ± 4 V

TAP3500 10X, 3.5 GHz, ± 4 V

Differential Voltage Probe

TDP0500 50X/5X, 500 MHz,

± 42 V/± 4.2 V

TDP1000 50X/5X, 1 GHz,

± 42 V/± 4.2 V

TDP1500 10X/1X, 1.5 GHz,

± 8.5 V/± 850 mV

TDP3500 5X, 3.5 GHz, ± 2 V

High Voltage Probes

TMDP0200 50X, 800 MHz, 2500 V

Peak

THDP0200 500X/50X, 200 MHz,

± 1500 V/± 150 V

THDP0100 1000X/100X, 100 MHz,

± 6000 V/± 600 V

Current Probes

TCP0020 50 MHz, 20 A DC

TCP0030 120 MHz, 30 A DC

TCP0150 20 MHz, 150 A DC

$2,140

$3,740

$5,070

$3,430

$4,840

$5,540

$6,910

$1,730

$1,730

$2,960

$2,460

$3,460

$4,090

Recommended Service

R3 3-year Extended Warranty Varies

R5 5-year Extended Warranty Varies

Analog

Sample Rate

20/10/5 GS/s

20/10/5 GS/s

40/20/10 GS/s

40/20/10 GS/s

Instrument Options

Record Length

Opt. 2RL 25M/Ch

Opt. 5RL 50M/Ch

Opt. 10RL

*1

125M/Ch

Limitations apply. See data sheet for full details.

* 1 Not available on DPO7054C, DPO7104C

Learn more with

“Understanding and

Characterizing

Timing Jitter” primer.

Pricing (USD)

$18,300

$22,800

$30,800

$39,300

Ships with Product

Four P6139B 500 MHz, 10X TekVPI Passive Voltage

Probes

NI LabVIEW SignalExpress

TE (LE version) Software

Calibration Certificate, Quick Reference Manual &

Documentation on CD

Front Panel Cover, Power Cord

1-year Warranty

$3,910

$9,790

$19,600

Understanding and Characterizing

Timing Jitter

Primer www.tektronix.com/dpo7000 19

Probes and Accessories

Probes and Accessories

Tektronix probes and accessories are perfectly matched to our industry-leading oscilloscopes. With over 100 choices available, you will find the probe you need.

Active Probes

Bandwidth up to 4 GHz

True signal reproduction and fidelity

Low input capacitance: down to < 0.5 pF

Small compact probe heads for probing small geometry circuit elements

Current Probes

Easy to use and accurate AC/DC current measurements

DC up to 2 GHz

Amplitude measurements from 1 mA to

20,000 A

Split core and solid core construction

Differential Probes

Bandwidth up to 20 GHz

Easily measure differential signals

Low input capacitance: down to < 0.3 pF

High common mode rejection ratio (CMRR)

Wide range of probe tips for easier circuit access

Passive Probes

DC to 1 GHz

Wide range of performance to meet the demands of many applications

Lightweight, ergonomic designs to fit your needs

Wide range of probe tips for easier circuit access

High Voltage Probes

Wide range of voltage measurements - Up to 40 kV peak (100 ms pulse)

Single-ended or differential

Carrying Cases and Accessories

TekVPI Interface Adapter for TekProbe probes

Probe holders and positioners

Probe power supply

Soft- and hard-sided cases

Interactive Probe Selector Tool

Need help finding the right probe for your application? The online Tektronix Probe Selector Tool will guide you through a few easy questions to match your need to the right probe. Visit us anytime, anywhere at: www.tektronix.com/probes

20 www.tektronix.com/probes

Signal Generators Selection

Signal Generators

The definition of versatility, Tektronix signal generators create a virtually unlimited range of standard and custom signals, from sine or pulse to ideal or distorted and anything in between.

AFG2000

Bandwidth

Channels

Memory Depth

Standard

Waveforms

20 MHz

1

4 x 128 k points

Sine, Sine(x)/x, Square, DC, Ramp, Gaussian, Exponential Decay,

Pulse, Lorentz, Noise, Arbitrary, Haversine, Exponential Rise

Modulation

AM, FM, PM, FSK, PWM, External

Additional Modes

Sweep, Burst, Add Noise Impairment

Starting Price

$1,590

AFG3000 Series

240 MHz, 100 MHz, 25 MHz, 10 MHz

1 or 2 (independent or synchronized)

128 k points

Sine, Sine(x)/x, Square, DC, Ramp, Gaussian, Exponential Decay,

Pulse, Lorentz, Noise, Arbitrary, Haversine, Exponential Rise

AM, FM, PM, FSK, PWM, External

Sweep, Burst, Add Noise Impairment

$1,890

Choosing Your Signal Generator

In electronic test and measurement, more often than not, a signal source is required to generate signals that are not available unless externally provided. Below is a list of common features that you may want to consider when choosing a signal generator for your application.

Sample rate, usually specified in terms of megasamples or gigasamples per second, denotes the maximum clock or sample rate at which the instrument can operate. The sample rate affects the frequency of the main output signal. In general, you should choose an instrument where the sampling frequency is twice that of the highest spectral frequency component of the generated signal to ensure accurate signal reproduction. The maximum sample rate also determines the smallest time increment that can be used to create waveforms. Typically this figure is simply the result of the calculation; T = 1/F, where T is the timing resolution in seconds and F is the sample rate.

Vertical resolution pertains to the binary word size, in bits, of the instrument’s DAC, with more bits equating to higher resolution.

The vertical resolution of the DAC defines the amplitude accuracy and distortion of the re-produced waveform. While more is better there is a general trade-off for most arbitrary waveform instruments, the higher the resolution the lower the sample rate.

Tektronix signal generators offer a range of features and output capabilities. When choosing your signal generator, you should also evaluate standard waveforms, modulation capabilities, output amplitude and waveform editing software to ensure that the instrument meets your needs.

Memory depth, or record length, plays an important role in signal fidelity because it determines how many points of data can be stored to define a waveform. Deeper memory enables you to store more waveform detail and/or more cycles of the desired waveform.

www.tektronix.com

21

Signal Generators Selection

Product Highlights

12 standard waveforms – Sine, Square, Pulse, Ramp,

Noise, DC, Sine(x)/x, Gaussian, Lorentz, Exponential

Rise, Exponential Decay and Haversine

Arbitrary waveform capability

AM, FM, PM, FSK, PWM, sweep and burst modes

Front-panel USB host port and rear-panel USB device port, optional Ethernet and GPIB ports (Opt. GL)

Wide frequency range

(1 µHz to 20 MHz) supports amplifier and filter testing applications.

AFG2000

Usually, generating a range of signals requires investment in a high-end signal generator.

Introducing the Tektronix AFG2000. With 20 MHz bandwidth, 14-bit resolution, and

250 MS/s sample rate, the AFG2021 Arbitrary Function Generator can create simple and complex signals. But perhaps its most impressive feature is its entry-level price.

Models

AFG2021

Analog

Channels

1

Output

Bandwidth

20 MHz

Analog

Sample Rate

250 MS/s

Quickly modify, create and transfer waveforms using the included ArbExpress ® software.

Memory Depth Amplitude (into 50

Ω)

Pricing (USD)

128 k 10 mV p-p

to 10 V p-p

$1,590

Recommended Accessories

Cables

$217 012-0482-00 BNC cable shielded,

3 ft.

012-1256-00 BNC cable shielded,

9 ft.

012-0991-00 GPIB cable, double shielded

011-0049-02 50 Ω BNC Terminator

Accessories

$89

$515

$143

RMU2U Rackmount kit $152

013-0345-00 Fuse adapter, BNC-P to BNC-R

$329

159-0454-00 Fuse set, 3pcs, 0.125 A $22

Instrument Options

Opt. GL GPIB/LAN Interface

(configured at time of purchase)

$100

Recommended Service

SILV200 5-year Extended

Warranty

$260

Ships with Product

ArbExpress

Software and NI LabVIEW

SignalExpress ™ TE (LE version) Software

LabView & IVI drivers

Calibration Certificate, Quick Reference Manual &

Documentation on CD

USB Cable

Power Cord

3-year Warranty

Learn more about the time-saving features of ArbExpress with the “Replicating

Real World Signals with an Arbitrary/

Function Generator” application note.

Replicating Real World Signals with an

Arbitrary/Function Generator

Application Note

Introduction

Nearly all consumer products today have circuits or devices that require the input of specific electronic signals in order for the product to perform correctly.

This input could be as simple as the signal from an automotive knock sensor, or as complex as a serial data communication bus signal such as Controller

Area Network (CAN) or Inter IC Bus (I2C) signal.

When designing and testing these devices, a mechanism is required to replicate the input signals. In many cases it may also be useful to add noise or other anomalies to the signals to test the devices under real world and stress conditions. A common approach is to create these signals using software applications or just capture a live signal using an oscilloscope. This created or captured waveform is then loaded in an Arbitrary/Function

22 www.tektronix.com/afg2000

Signal Generators

Product Highlights

12 standard waveforms - Sine, DC, Pulse, Exponential

Decay, Sine(x)/x, Ramp, Lorentz, Haversine,

Exponential Rise, Square, Gaussian, Noise

Arbitrary waveform capability

AM, FM, PM, FSK, PWM modulation

Front-panel USB host port and rear-panel Ethernet and GPIB ports

Large color display shows your settings and waveforms at a single glance.

AFG3000C Series

Test complex designs faster with a fully loaded function generator. Featuring 12 standard waveforms, plus arbitrary capability and many modulation options, this generator supports a wide range of application needs. Add in best-in-class performance and 25 shortcut keys and you have a generator that’s loaded with features and light on complexity.

Models

AFG3011C

AFG3021C

AFG3022C

AFG3051C

AFG3052C

AFG3101C

AFG3102C

AFG3251C

AFG3252C

Create and modify waveforms with ease with the included ArbExpress ® software.

1

2

1

2

1

2

1

2

Analog

Channels

1

Output

Bandwidth

10 MHz

25 MHz

25 MHz

Analog

Sample Rate

250 MS/s

250 MS/s

250 MS/s

Memory Depth Amplitude (into 50

128 k

128 k

128 k

50 MHz

50 MHz

250 MS/s

250 MS/s

128 k

128 k

100 MHz 1 GS/s (

≤16k), 250 MS/s (>16k) 128 k

100 MHz 1 GS/s ( ≤16k), 250 MS/s (>16k) 128 k

240 MHz 2 GS/s (

≤16k), 250 MS/s (>16k) 128 k

240 MHz 2 GS/s (

≤16k), 250 MS/s (>16k) 128 k

20 mV p-p

to 20 V p-p

10 mV p-p

to 10 V p-p

10 mV p-p

to 10 V p-p

10 mV

10 mV

20 mV

20 mV

50 mV

50 mV p-p p-p p-p p-p p-p p-p

to 10 V

to 10 V

to 10 V

to 10 V

to 5 V

to 5 V p-p p-p p-p p-p p-p p-p

Ω)

Pricing (USD)

$4,220

$1,890

$2,790

$2,470

$3,650

$4,290

$6,090

$8,660

$11,900

Recommended Accessories

Cables

012-0482-xx BNC cable shielded,

3 ft.

012-1256-xx BNC cable shielded,

9 ft.

012-0991-xx GPIB cable, double shielded

$217

$89

$515

Accessories

RM3100 Rackmount kit $450

013-0345-xx Fuse adapter, BNC-P to BNC-R

$329

159-0454-xx Fuse set, 3pcs, 0.125A $22

Recommended Service

SILV400 5-year Extended

Warranty

$415

Ships with Product

ArbExpress ™ Software and NI LabVIEW

SignalExpress

TE (LE version) Software

LabView & IVI drivers

Calibration Certificate, Quick Reference Manual &

Documentation on CD

Power Cord

3-year Warranty

Learn more about the time-saving features of ArbExpress with the “Replicating

Real World Signals with an Arbitrary/

Function Generator” application note.

Replicating Real World Signals with an

Arbitrary/Function Generator

Application Note

Introduction

Nearly all consumer products today have circuits or devices that require the input of specific electronic signals in order for the product to perform correctly.

This input could be as simple as the signal from an automotive knock sensor, or as complex as a serial data communication bus signal such as Controller

Area Network (CAN) or Inter IC Bus (I2C) signal.

When designing and testing these devices, a mechanism is required to replicate the input signals. In many cases it may also be useful to add noise or other anomalies to the signals to test the devices under real world and stress conditions. A common approach is to create these signals using software applications or just capture a live signal using an oscilloscope. This created or captured waveform is then loaded in an Arbitrary/Function www.tektronix.com/afg3000 23

SourceMeter

®

Selection

SourceMeter

®

SMU Instruments

Keithley Instruments SourceMeter

®

SMU instruments source current or voltage and simultaneously measure current, voltage and resistance with high speed and accuracy. SourceMeter

®

SMU instruments offer a smart alternative to separate power supplies and DMMs, saving money and limited test bench space.

Series 2400 SourceMeter

®

SMU Instruments

1 Channels

Accuracy 6½-digit measurements

Max. Readings / Second

2,000

Interface

Application Features

GPIB, RS-232, Digital I/O

Convenient DMM-like user interface; 2/4/6 wire resistance with force I or V source modes, V-Force from 1 ΩV to 1.1KV, 10pA to 5A cont., 10A pulsed, 2W to 110W

Test Sequencing /

Scripting

Included Software

Built-In ramp generator and list sweep modes, 100 point global machine state sequencer for fast test setup and execution

LabTracer 2.0 I-V curve utility and IVI and LabVIEW drivers included.

Starting Price

$3,170

Series 2600B System SourceMeter

®

SMU Instruments

1-2 (optional expansion to 64 via TSP-Link

®

)

6½-digit measurements

20,000

GPIB, LAN (LXI), USB and RS-232, Digital I/O

True multi-channel parallel test via TSP-Link. Up to 0.1 fA resolution.

TSP

®

(Test Script Processing) technology embeds complete test programs inside the instrument for unmatched system-level speed

Built-in, web browser-based characterization software, IVI and

Labview drivers.

$6,090

Choosing Your Source Measure Unit (SMU)

Instrument

A SMU instrument integrates precision power supply and digital multimeter (DMM) capabilities in one instrument while covering a wide dynamic range. SMUs source and measure simultaneously, making them ideal for characterizing and testing semiconductors and other non-linear devices and materials.

The true measure of speed is how quickly a final measurement or set of measurements (such as a suite of current vs. voltage parameters) is returned to the PC controller. This involves not only the number of readings/second, but also range and function change times.

Sourcing Resolution and

Output Stability

An SMU’s usable maximum resolution depends on its overall accuracy and the resolution of its analog-to-digital converter

(ADC). In general, the higher the resolution is, the higher the bit count on the ADC and the higher the accuracy will be.

Error, and Noise

When choosing between instruments, compare the time it takes a

SMU to settle the specified offset error. This can be seen in the

“bumpiness” of the resulting data curve which indicates measurement noise; the smoother the data curve the less measurement noise. SMUs having a fast, flat, and noise-free settling time achieve more consistent results during a series of measurements taken over time.

Triaxial cables offer significant advantages over coaxial cables when making low current measurements. Triaxial cables have an extra shield that ensures lower leakage, better response, and greater noise immunity.

24 www.keithley.com/products/dcac/currentvoltage

SourceMeter

®

SMU Instruments

Product Highlights

Wide I-V range from 1100V to 100nV and 10.5A pulse to 1pA

4-quadrant design simultaneously measures voltage, current, and resistance

Remote sense on V-source and measure plus guarded ohms mode

Built-In test sequencer

Includes LabTracer 2.0 I-V curve utility and IVI and

LabVIEW drivers

Standard GPIB and RS-232 interfaces; Banana (front / rear) Connectors

Model 2400 four-quadrant operation characteristics, a feature of all SourceMeter

SMU instruments.

Series 2400 SourceMeter

®

SMU Instruments

Series 2400 SourceMeter

®

SMU instruments are single-channel models with I-V capability from 1100V to 100nV and 10.5A pulse to 1pA. They offer a smart alternative to separate power supplies and digital multimeters (DMMs) and provide a convenient

DMM-like user interface.

Free LabTracer software for remote control and data sharing for applications ranging from the simple to complex.

Model

2400 / 2401

2420 / 2425 / 2440

2410

2430

Current Max / Min

1.05A /10pA

5.25A /100pA

1.05A /10pA

10.5A pulse /100pA

Recommended Service

C/2400-

3Y-17025

(ISO-17025 accredited) calibrations within 3 years of purchase for

Models 2400*

C/2401-

3Y-17025

C/2410-

3Y-17025

(ISO-17025 accredited) calibrations within 3 years of purchase for

Model 2401*

(ISO-17025 accredited) calibrations within 3 years of purchase for

Models 2410*

C/2420-

3Y-17025

C/2425-

3Y-17025

(ISO-17025 accredited) calibrations within 3 years of purchase for

Models 2420*

(ISO-17025 accredited) calibrations within 3 years of purchase for

Models 2425*

C/2430-

3Y-17025

C/2440-

3Y-17025

(ISO-17025 accredited) calibrations within 3 years of purchase for

Models 2430*

(ISO-17025 accredited) calibrations within 3 years of purchase for

Models 2440*

*

Not available in all countries.

$842

$842

$924

$924

$985

$1,010

$974

Voltage Max / Min

200V/1µV

100V/1µV

1100V/1µV

200V/1µV

Recommended Service

R3 3-year Extended

Warranty

R5

C3

C5

R3DW

R5DW

5-year Extended

Warranty

Calibration Service

3 Years

Calibration Service

5 Years

Repair Service

Coverage 3 Years

Repair Service

Coverage 5 Years

Varies

Varies

Varies

Varies

Varies

Varies

Power

22W

110W

22W

1100W

Pricing (USD)

$4,320 / $3,170

$6,180 / $7,360 / $7,030

$6,180

$10,700

Ships with Product

Model 8605 Test Leads

LabVIEW Software Driver (downloadable)

LabTracer Software (downloadable)

Calibration Certificate (Basic)

Manual CD

Power Cord

Warranty

Read the white paper,

“Choosing the Optimal

Source Measurement

Unit Instrument for Your

Test and Measurement

Application.”

www.keithley.com/series2400 25

SourceMeter

®

SMU Instruments

Product Highlights

4-quadrant design simultaneously measures voltage, current, and resistance

TSP

®

(embedded Test Script Processor) architecture enables industry-best system-level speed

Arbitrary waveform generation with 1% to 100% duty cycle

Built-in software for quick and easy I-V test through web browser

GPIB, LAN (LXI), USB and RS-232

Built-in, Java-based test software runs directly from any web browser to boost productivity.

Series 2600B System SourceMeter

®

SMU Instruments

Series 2600B SourceMeter

®

SMU instruments are the industry’s most powerful, fastest, and highest resolution SMU instruments. Now they’re easier than ever to use with USB 2.0 connectivity, Model 2400 software emulation, and Java-based plug & play test software. Series 2600B models offer the industry’s widest dynamic range:

10A pulse to 0.1fA and 200V to 100nV.

Model

2601B

2602B

2604B

2611B

2612B

2614B

2634B

2635B

2636B

Current Max / Min Voltage Max / Min

3A DC, 10A pulse/100 fA

3A DC, 10A pulse/100 fA

3A DC, 10A pulse/100 fA

40V/100nV

40V/100nV

40V/100nV

1.5A DC, 10A pulse/100 fA 200V/100nV

1.5A DC, 10A pulse/100 fA 200V/100nV

1.5A DC, 10A pulse/100 fA 200V/100nV

1.5A DC, 10A pulse/1fA 200V/100nV

1.5A DC, 10A pulse/0.1 fA 200V/100nV

1.5A DC, 10A pulse/0.1 fA 200V/100nV

TSP technology executes complete test programs from the 2600B’s non-volatile memory.

Max readings / sec

20,000

20,000

20,000

20,000

20,000

20,000

20,000

20,000

20,000

No. of Channels Pricing (USD)

1

2

1

2

2

2

2

1

2

$6,090

$8,930

$7,150

$6,090

$8,930

$7,150

$11,200

$9,060

$13,900

Recommended Accessories

2600-BAN Banana Test Leads

Adapter

$154

8606 $57

2600-Std-

Res

Probe Kit for 2600-

BAN

Calibration Standard

1G ohm Resistor

$1,920

Recommended Service

R3 3-year Extended

Warranty

R5

C3

C5

R3DW

R5DW

5-year Extended

Warranty

Calibration Service

3 Years

Calibration Service

5 Years

Repair Service

Coverage 3 Years

Repair Service

Coverage 5 Years

Varies

Varies

Varies

Varies

Varies

Varies

Ships with Product

Operators and Programming Manuals

2600-ALG-2: Low Noise Triax Cable with Alligator

Clips, 2m (6.6 ft.) (two supplied with 2634B and

2636B, one with 2635B)

2600-Kit: Mating Screw Terminal Connectors with strain relief and covers (2601B/2602B/2604B/2611B/2

612B/2614B)

CA-180-3A: TSP-Link/Ethernet Cable (two per unit)

TSP Express Software Tool (embedded)

Test Script Builder Software (supplied on CD)

LabVIEW Driver

ACS Basic Edition Software (optional)

26 www.keithley.com/series2600B

Power Analyzer Selection

Power Analyzers

Fully characterize your power-electronics design from input to output with Tektronix power analyzers. Designed for precision measurement of power-electronics circuits and devices, these analyzers give you what you need to measure conversion efficiency and perform compliance testing on single-phase or 3-phase devices.

Multi-Channel Power Analyzer

Power Input Modules

Basic Accuracy (V & I)

Measurement Bandwidth

Voltage Range

Current Range (internal shunts)

Starting Price

PA4000

PA4000_1CH, PA4000_2CH, PA4000_3CH, PA4000_4CH

1 – 4 (factory configured)

0.04% of Reading (45-850 Hz)

DC, 0.1 Hz - 1 MHz

2V peak to 2000V peak

0.0025 A to 30 Arms

$10,500

Choosing Your Power Analyzer

Power analyzers are used for testing a wide range of power-electronics devices, from cell-phone chargers to 1000kW grid-connected inverters. To help you choose the best analyzer for your application, consider the criteria below.

Power analyzers are available in both fixed configurations (typically single-channel) and modular configurations. If your application is limited to single-phase devices, a single-channel analyzer may meet your needs. But if you need to measure conversion efficiency on these devices, a two-channel analyzer is required.

Testing of 3-phase devices of course requires a multi-phase analyzer. In many cases, two channels will be all you need for a two-wattmeter measurement on 3-wire inputs or outputs. A four- channel analyzer can measure both input and output simultaneously, to determine conversion efficiency.

How much bandwidth is enough? The measurement bandwidth you need is usually determined by the switching speed of the device-under-test, or the highest-order harmonic that your testing requires. Switching speeds of tens or hundreds of kHz are common in today’s designs. But new semiconductor technologies promise to increase speeds up to 2x or more in the near future.

Choose an analyzer that is capable of measuring your highest frequencies of interest, with some headroom for future-proofing.

Compliance Testing for

Regulatory Standards

If your application requires you to know that your device is compliant with regulatory standards such as IEC61000 for harmonics, or EnergySTAR for energy efficiency, you need an analyzer capable of meeting the test requirements specified by the standard. Even better, look for an analyzer supported by software applications that can automate instrument setup and reporting of test results in the exact format required for your application.

Will you be measuring milliamperes, or hundreds of amperes?

Power analyzers vary in the features they offer for direct current inputs or connection to external current transducers. Ideally, the analyzer should have internal current shunts that allow you to connect your device directly, for best accuracy. If you will be testing a range of devices at different power levels, you may value both high and low-range shunts. Finally, if your application requires external current transducers (usually required for current

>30Amps), make sure there are transducers available that are well-matched to the analyzer and offer the accuracy you need.

Will you have a need to control the analyzer remotely, or transfer measurement data to your PC? If so, you will want to look for an instrument that features the communication ports you need.

Depending on the analyzer model, some ports may be standard features or extra-cost options; be careful to choose the right instrument configuration that meets your requirements. www.tektronix.com

27

Power Analyzers

Product Highlights

1 to 4 input modules with precision phase-matched V

& I inputs, 1000 Vrms, 30 Arms direct input

Measurement BW: DC to 1 MHz

0.04% basic accuracy

Application specific test modes for Motor Drives,

Ballasts, Standby Power and Energy Integration

Harmonics measurement to 100th harmonic

Full-color TFT display with waveform graphics, vector, bar chart, trend

Each input module features both high- and low-range current shunts.

PA4000 Power Analyzers

Tektronix PA4000 Power Analyzers provide you with highly accurate power, energy and efficiency measurements. Precisely-matched inputs and advanced signal processing deliver high measurement accuracy, even when power is distorted or noisy. The PA4000 performs all power measurements – and harmonics analysis, application-specific measurements, PC interfaces, and dual current shunts per channel are all standard features.

USB, Ethernet and RS-232 ports are standard.

Model Description

PA4000 1CH PA4000 Power Analyzer with 1 input module

PA4000 2CH PA4000 Power Analyzer with 2 input modules

PA4000 3CH PA4000 Power Analyzer with 3 input modules

PA4000 4CH PA4000 Power Analyzer with 4 input modules

BasicAccuracy

(V & I)

Voltage Input Range

Current Range

(internal shunts)

Pricing (USD)

0.04% (45-850 Hz) 2V peak to 2000V peak 0.0025 A to 30 Arms $10,500

0.04% (45-850 Hz) 2V peak to 2000V peak 0.0025 A to 30 Arms $13,400

0.04% (45-850 Hz) 2V peak to 2000V peak 0.0025 A to 30 Arms $16,200

0.04% (45-850 Hz) 2V peak to 2000V peak 0.0025 A to 30 Arms $18,900

Recommended Accessories

CT-60-S Fixed-Core Current

Transducer, High

Accuracy, up to 60A

CT-200-S

CT-400-S

Fixed-Core Current

Transducer, High

Accuracy, up to 200A

Fixed-Core Current

Transducer, High

Accuracy, up to 400A

CT-1000-S Fixed-Core Current

Transducer, High

Accuracy, up to 1000A

(requires external power supply)

CT-100-M Fixed-Core Current

Transducer, Hall Effect, up to 100A

CT-200-M Fixed-Core Current

Transducer, Hall Effect, up to 200A

CT-500-M Fixed-Core Current

Transducer, Hall Effect, up to 500A

CT-1000-M Fixed-Core Current

Transducer, Hall Effect, up to 1000A

28 www.tektronix.com/poweranalyzer

Recommended Accessories

CL200 Current Clamp, 0.5A

- 200A, for Tektronix

Power Analyzers

CL1200

PA-

LEADSET

Current Clamp, 0.1A

- 1000A, for Tektronix

Power Analyzers

Replacement Lead

Set for Tektronix

Power Analyzers (One

Channel Lead Set)

Recommended Service

R5 5-year Extended

Warranty

C3

C5

Calibration Service

3 Years

Calibration Service

5 Years

Varies

Varies

Varies

Ships with Product

Lead set (1 set per input module)

User Manual

AC Power Cord

Certificate of Traceable Calibration

3-year Product Warranty

Learn more about power measurements, from switching loss to compliance testing at www.tektronix.com/power.

Digital Multimeters Selection

Digital Multimeters

Designed to save time and reduce headaches, Tektronix and

Keithley Digital Multimeters are built to do more so you don’t have to. Each one is loaded with time-saving features like automated measurements, built-in analysis modes and front-panel shortcut buttons. Keithley’s highly regarded high performance digital multimeters (DMMs,) include 7½ or 8½-digit solutions as well as flexible broad-purpose DMMs.

Resolution

Basic Accuracy

Optional Switch

Functions

Interface

Starting Price

Tektronix Model

DMM4020

5½ digit

0.015%

Not Applicable

Tektronix Models

DMM4040/4050

6½ digit

Keithley Models

2001, 2010

7½ digit

0.0018% 0.0035%

(DMM4040)

0.0024%

(DMM4050)

Not Applicable 10 Channel

Keithley Model

2002

8½ digit

0.0006%

10 Channel

RS-232, RS-232 to

USB Device Adapter

Included

$792

USB host, RS-232,

GPIB, Ethernet,

RS-232 to USB

Device Adapter

Included

$1,150

GPIB, RS-232

(Model 2010)

GPIB

(Model 2001)

$2,790

GPIB

$5,740

Keithley Models

2000, 2100

6½ digit

0.0038%

(Model 2100)

0.0020%

(Model 2000)

10 Channel

(Model 2000)

Keithley Model

2110

5½ digit

0.012%

Not Applicable

GPIB, RS-232

(Model 2000)

USB-TMC

(Model 2100)

USB-TMC GPIB

Option

$862 $595

Choosing Your Digital Multimeter

To help you choose the right digital multimeter for your needs, the most common selection criteria are listed below, along with helpful tips for determining your requirements.

Resolution refers to how fine a measurement a meter can make.

By knowing the resolution of a meter, you can determine if it is possible to see a small change in your signal. The terms digits and counts are used to describe a meter’s resolution. A 6.5-digit multimeter can display 6 full digits ranging from 0 to 9, and one

“half” digit which displays only a 1 or is left blank. A 6.5-digit meter will display up to 1,999,999 counts of resolution.

Digital multimeters are capable of making a variety of different measurements. A basic DMM typically can measure voltage, current and resistance. Other measurements commonly supported are continuity and diode measurements. Continuity is a quick go/no-go resistance test that distinguishes between an open and a closed circuit. A diode test mode measures the actual voltage drop across a junction. Other possible measurement modes are frequency, period, temperature and capacitance.

Accuracy is the largest allowable error that will occur under specific operating conditions. In other words, it is an indication of how close the DMM’s displayed measurement is to the actual value of the signal being measured. Accuracy is usually expressed as a percent of reading. An accuracy of one percent of reading means that for a displayed reading of 100 volts, the actual value of the voltage could be anywhere between 99 volts and 101 volts.

Most of Keithley’s DMM’s (excluding Models 2100 and 2110) include an option slot located in the rear, to accommodate a scanner card enabling automated multipoint measurements. www.keithley.com/dmm 29

Digital Multimeters

Product Highlights

5.5 digit resolution

Basic V dc accuracy of up to 0.015%

Volts, ohms, amps and frequency measurements

Dedicated dc leakage current measurement

CAT I 1000 V, CAT II 600 V

Make accurate 4-wire resistance measurements with only two test leads!

DMM4020

Make measurements, not compromises. Measure a variety of parameters— from volts, ohms and amps to frequency—with one instrument. Save time with front-panel shortcut keys and built-in limit testing. Performance. Reliability. Legendary ease-of-use. One instrument. Looks like you can have it all.

With the unique dual display, you can measure two different parameters of the same signal from one test connection.

Models

DMM4020

Display

Dual; Numeric

Resolution

(Digits)

5.5

Recommended Test Leads

Test Leads

196-3520xx

TL705

TL725

Premium Test Leads

(TL710 replacement/ spare)

2x4 Wire Ohm 1000V

Test Lead

2x4 Wire Ohm SMD

Test Tweezers

$34

$78

$104

Measurements

V ac, V dc, I dc, I ac,

Ω,

Cont, Diode, Freq

Recommended Accessories

Accessories

ACD4000

HCTEK-

4321

RMU2U

Soft Carrying Case

Hard Carrying Case

Rackmount Kit

$249

$796

$152

013-0369xx

Calibration Fixture

4-terminal short

$45

Recommended Service

SILV100 5-year Extended

Warranty

$156

Basic V dc accuracy

(% Reading + % Range)

0.015 + 0.004 (yr.)

Pricing (USD)

$792

Another Product for Consideration

If you need greater accuracy, the DMM4050 provides

6.5 digits of resolution and up to 0.0024% basic V dc accuracy.

Ships with Product

One Set TL710 Test Leads

RS-232 to USB Adapter Cable

NI LabVIEW SignalExpress

TE (LE version) Software

Statement of Calibration Practices

User Manual & Documentation on CD

Power Cord

3-year Warranty

Learn more with the

“Using the DMM Series to Make Simple and Accurate

Resistance

Measurements” application note.

Using the DMM Series to make simple and accurate resistance measurements

Application Note causes measurement error. You can virtually eliminate this error by using four leads and a multimeter with separate source and measure terminals. Unfortunately, adding additional leads and connections makes the measurement you may have to swap clips and probes as you change from voltage to resistance. Now a new concept enables you to take four-wire resistance measurements with just two leads.

30 www.tektronix.com/dmm4020

Digital Multimeters

Product Highlights

6.5 digit resolution

Basic V dc accuracy of up to 0.0024%

Volts, ohms, amps, frequency and period measurements

Capacitance and temperature measurements

(DMM4050)

CAT I 1000 V, CAT II 600 V

Make accurate 4-wire resistance measurements with only two test leads!

DMM4040/4050

Meet the multimeter to rule them all. Make a wide range of measurements—from volts, ohms and amps to frequency, temperature and capacitance—with one instrument.

Monitor and record measurements over time, or environmental changes with built-in histogram, TrendPlot

and statistics analysis modes. Get unparalleled ease-of-use with a dual display and USB connectivity. Hello, efficiency. Goodbye, complexity.

Models

DMM4040

DMM4050

Display

Dual; Numeric &

Graphical

Dual; Numeric &

Graphical

Resolution

(Digits)

6.5

6.5

See how your device is changing over time with built-in analysis modes –

TrendPlot

, histograms and statistics.

Measurements

V ac, V dc, I dc, I ac, Ω,

Continuity, Diode, Freq, Period

V ac, V dc, I dc, I ac,

Ω,

Continuity, Diode, Freq, Period,

Temp., Capacitance

Basic V dc accuracy

(% Reading + % Range)

0.0035 + 0.0005

0.0024 + 0.0005

Pricing (USD)

$1,150

$1,420

Recommended Test Leads

Temperature Probes

TP750 100 Ohm RTD

Temperature Probe

(DMM4050 only)

$528

Test Leads

196-3520xx

$34

TL705

TL725

Premium Test Leads

(TL710 replacement/ spare)

2x4 Wire Ohm 1000V

Test Lead

2x4 Wire Ohm SMD

Test Tweezers

$78

$104

Recommended Accessories

Accessories

ACD4000 Soft Carrying Case $249

HCTEK-

4321

RMU2U

013-0369xx

Hard Carrying Case

Rackmount Kit

Calibration Fixture

4-terminal short

$796

$152

$45

Recommended Service

SILV100 5-year Extended

Warranty

$156

Another Product for Consideration

The PWS DC Power Supply Series is designed to stack with the DMM Series, saving you bench space.

Ships with Product

One Set TL710 Test Leads

RS-232 to USB Adapter Cable

NI LabVIEW SignalExpress

TE (LE version) Software

Calibration Certificate

User Manual & Documentation on CD

Power Cord

3-year Warranty

Learn more with the

“Measurement Statistics and Histograms with the Tektronix

DMM4050 and

DMM4040

Multimeters” application note.

Measurement Statistics and Histograms with the Tektronix DMM4050 and DMM4040

Multimeters

Application Note

“What is the output voltage of the power supply?” This is one of the most common measurements made with digital multimeters. Similar questions arise about the frequency of oscillators, the value of resistors, operating temperature, or the input to a voltage controlled oscillator. It’s easy to use a digital multimeter to take any of these readings.

But taking a single reading gives you only part of the story.

An equally important question is: “How stable is the output of the power supply?” Understanding this, and other questions, requires looking at measurement statistics. What is the average value of the output? What is the standard deviation? The

Tektronix DMM4050 and DMM4040 multimeters offer integrated analysis functions to help you answer these questions.

www.tektronix.com/dmm4050 31

Digital Multimeters

Product Highlights

Exceptional measurement integrity and high speed throughput

Large number of measurement functions, including temperature and capacitance (2110)

Intuitive front panel gets users up and running quickly

USB Test and Measurement Class (USB-TMC) interface (2100/2110)

The KI-Tool application for the Model 2100 and Model

2110 provides charting and graphing capabilities without programming.

Models 2000, 2100, 2110

These cost effective, high precision instruments offer 5.5- and 6.5-digit accuracy and are ideal for a wide range of manual, semi-automatic, and production test applications. They can be used as stand-alone benchtop instruments and as components in test systems.

For multipoint measurement, plug a scanner card into the

Model 2000.

Model

2000

2100

2110

Resolution

Basic V DC Accuracy, 1 Year

(% Reading + % Range)

0.0030 + 0.0005

0.0038 + 0.0006

0.012 + 0.004

Measurements

Vac, Vdc, Idc, Iac, 2W

Ω, 4WΩ, Temp,

Freq, Period, dB, dBm, Cont., Diode

Vac, Vdc, Idc, Iac, 2W Ω, 4WΩ, Temp,

Freq, Period, Cont., Diode

Vac, Vdc, Idc, Iac, 2W

Ω, 4WΩ, Temp,

Freq, Period, dB, dBm, Cont., Diode,

Cap., Therm.

Interface

GPIB, RS-232

USB

USB (GPIB

Option)

Pricing (USD)

$1,140

$862

$595

Recommended Accessories

2000-

SCAN

10-channel Scanner

Card (Model 2000)

$580

2001-

SCAN

2001-

TSCAN

5808

5805

10-channel Scanner

Card with Two Highspeed channels

(Model 2000)

9-channel

Thermocouple Scanner

Card (Model 2000)

Low cost, Single Pin,

Kelvin Probes

Kelvin Probes,

0.9m (3ft)

$775

$1,040

$105

$217

5805-12

5809

Kelvin Probes,

3.6m (12ft)

Low Cost, Kelvin Clip

Lead Set

$287

$159

Recommended Accessories

7007-1 Shielded GPIB Cable,

1m (3.3ft)

$108

7007-2 $119

KPCI-

488LPA

KUSB-

488B

4288-1

4299-3

4299-4

Shielded GPIB Cable,

2m (6.6ft)

IEEE-488 Interface/

Controller for the

PCI Bus

IEEE-488 USB to GPIB

Interface Adapter

Single Fixed

Rack Mount Kit

(Model 2000, 2100)

Single Rack Mount Kit

(Model 2100 and 2110)

Dual Rack Mount Kit

(Model 2100 and 2110)

$431

$502

$87

$99

$209

Ships with Product

Safety Test Leads

Product CD (Includes Users Manual, Drivers, Etc.)

USB Cable (2100/2110)

KI Tool and KI Link Software (2100/2110)

Calibration Certificate

Power Cord

1-year Warranty

Learn more with the “Using the Dual

Measurement

Functionality and Dual

Measurement Display on the Keithley Model

2110 5½-Digit Dual-Display Digital

Multimeter” Application Note.

32 www.keithley.com/broadpurpose

Digital Multimeters

Product Highlights

Measurement functions include temperature, 4-wire resistance, peak detection, low ohms, and Agilent

3458A emulation (2002)

Built-in slot for scanner card

Multiple measurement display (2001/2002)

Dry circuit measure function limits test voltage when testing contact or connector resistances (2010)

Add a plug-in scanner card to turn any of these DMMs into a complete scan and measure system.

Models 2001, 2002, 2010

Each Model 2001, 2002, and 2010 digital multimeter (DMM) offers superior measurement precision, sensitivity, and traceability. They also support plug-in scanner cards that allow you to quickly and economically create multi-channel measurement systems.

Model

2001

2002

2010

Resolution

Basic V DC Accuracy, 1 Year

(% Reading + % Range)

0.0024 + 0.0004

0.0010 + 0.00012

0.0024 + 0.0004

Measurements

Vac, Vdc, Idc, Iac, 2W

Ω, 4WΩ,

Temp, Freq, Period, Crest, Peak

Vac, Vdc, Idc, Iac, 2W

Ω, 4WΩ,

Temp, Freq, Period, Crest, Peak

Vac, Vdc, Idc, Iac, 2W Ω, 4WΩ,

Temp, Freq, Period, Cont., Diode,

Therm., Dry Circ.

Ω, Ratio

Interface

GPIB

GPIB

GPIB, RS-232

Use the multiple display capability (Model 2001/2002) to simultaneously display different aspects of one signal.

Pricing (USD)

$4,290

$5,740

$2,790

Recommended Accessories

2000-

SCAN

10-channel

Scanner Card

$580

2001-

SCAN

2001-

TSCAN

5805

5805-12

5808

5809

7007-1

7007-2

KPCI-

488LPA

KUSB-

488B

4288-1

10-channel Scanner

Card with Two

Highspeed Channels

9-channel

Thermocouple

Scanner Card

Kelvin Probes,

0.9m (3ft)

Kelvin Probes,

3.6m (12ft)

Low Cost, Single Pin,

Kelvin Probes

Low Cost, Kelvin Clip

Lead Set

Shielded GPIB Cable,

1m (3.3ft)

Shielded GPIB Cable,

2m (6.6ft)

IEEE-488 Interface/

Controller for the

PCI Bus

IEEE-488 USB to GPIB

Interface Adapter

Single Fixed Rack

Mount Kit

$775

$1,040

$217

$287

$105

$159

$108

$119

$431

$502

$87

Ships with Product

Model 8605 High Performance Modular Test Leads

(Models 2001, 2002)

Model 1751 Safety Test Leads (Model 2010)

Option Slot Cover (Models 2001, 2002)

Calibration Data

User Manual, Service Manual

Power Cord

1-year Warranty

Learn more with the

“Peak Detection with the Model 2001 DMM”

Application Note.

www.keithley.com/highper 33

Data Acquisition Selection

Data Acquisition Systems

Keithley data acquisition systems combine precision measurement, switching, and control into a single, tightly integrated enclosure. They offer affordable alternatives to separate DMMs and switch systems, dataloggers/ recorders, plug-in card data acquisition equipment, and

VXI/PXI systems.

DMM Resolution

Switching Density

Special Features

Switch Features

Interface

Starting Price

Series 2700

6½ Digits

Up to 80, 2-pole channels (2700/2701)

Up to 200, 2-pole channels (2750)

Front panel DMM jacks, Non-volatile memory buffer, Solid State temperature scanning

Up to 40, 2-pole Channels and 12 card options

GPIB, RS-232 (Models 2700 and 2750)

LAN, RS-232 (Model 2701)

$1,550

Series 3700

7½ Digits

Up to 576, 2-pole channels

USB Flash Drive support, 1 Ohm measure range, Solid State temperature scanning

Up to 96, 2-pole Channels and 10 card options

GPIB, LAN (LXI), USB-TMC, TSP-Link® Channel Expansion Bus

$1,950

Choosing Your Data Acquisition System

Designing the switching for an automated test system demands an understanding of the signals to be switched and the tests to be performed. The following is a cursory look at key decision points in the design of a switching system.

Multiplex switching can be used to connect one instrument to multiple devices or multiple instruments to a single device.

Multiplex switching permits multiple simultaneous connections and sequential or non-sequential switch closures. A matrix switch configuration is the most versatile because it can connect multiple inputs to multiple outputs. The isolated, or independent, switch configuration consists of individual relays, often with multiple poles, with no connections between relays. For scanner (or multiplex) cards, the channel is used as a switched input in measuring circuits or as a switched output in sourcing circuits. For switch cards, each channel’s signal paths are independent of other channels.

Three key relay types are used. Electromechanical offer the widest power range and a good life and speed at a relatively low cost.

Reed relays cost more but offer less contact wear and bounce for a better life and speed than electromechanical. Solid state cost still more, but offer the best life and speed with no contact wear or bounce.

Connection types found on switch cards include both screw terminals and mass-terminated connectors. At the instrument level, TSPLink master/slave connection offers easy system expansion between Series 3700A mainframes and to connect to

Series 2600B SourceMeter instruments.

34 www.keithley.com/datalogger

Data Acquisition

Product Highlights

6½-digit measurement engine

Front panel DMM jacks

300 volt isolation between channels and from any channel to ground to maintain signal integrity

Mass terminated or screw terminal connector options

Full per-channel card configurability

Non-volatile memory buffer

Choice of 12 switch/control plug-in modules

Series 2700

The Series 2700 System Switch/Multimeter combines precision measurement, switching, and control in a single, tightly integrated enclosure for either rack-mount or bench-top applications used by data loggers. The 2700 Series offers two- and five-slot models, as well as an Ethernet-based model for high speed and long distance communication.

Model

2700

2701

2750

Install up to five switch/ control modules in the

2750 mainframe or up to two in the 2700 and 2701 mainframes.

Screw terminals use oversize connectors for easier, mistake-free wiring.

Removable terminals available for some models.

Mainframe Size

2U, ½ Rack

2U, ½ Rack

2U, Full Rack

Interfaces

Resolution (Digits),

Accuracy

6½ Digits, 0.003% GPIB, RS232

Ethernet, RS232 6½ Digits, 0.003%

GPIB, RS232 6½ Digits, 0.003%

Advance Measure Functions

Temperature, 4-Wire Resistance

Temperature, 4-Wire Resistance

Temperature, 4-Wire Resistance,

Low Ohms

Pricing (USD)

$1,550

$1,860

$2,430

Plug-in Cards

7700 Dual 1x10 /

Electromechanical

Relay

7701

7702

7703

$470

Dual 1x16 /

Electromechanical

Relay

Dual 1x20 /

Electromechanical

Relay

$681

$892

Dual 1x16 / Reed Relay $1,060

7705 40 Independent Relay /

Electromechanical

Relay

$787

Recommended Accessories

7007-1 Shielded IEEE-488

Cable, 1m (2700,

2750)

$108

7007-2 $119

7788

7789

7790

Shielded IEEE-488

Cable, 2m (2700,

2750)

50-Pin D-Shell

Connector Kit (for 7703

& 7705 Mods.)

50-Pin/25-Pin D-Shell

Kit

50-Pin Male/Female,

25-Pin Male IDC

D-Shell Con. Kit

$83

$83

$83

Plug-in Cards

7706 16 Digital I/O,

2 Analog Outputs,

1x20 Multiplexer

7707

7708

7709

7710

7711

7712

32 Digital I/O,

1x10 Multiplexer

Dual 1x20 /

Electromechanical

Relay

6x8 /

Electromechanical

Relay

Dual 1x10 /

Solid State Relay

Dual 1x4, 2GHz /

RF Relay

Dual 1x4, 3.5GHz /

RF Relay

$892

$787

$892

$892

$681

$576

$2,110

Ships with Product

Product CD (Includes Users Manual, Drivers, Etc.)

Ethernet Crossover Cable (Model 2701 Only)

Calibration Certificate

Quick Reference Manual

ExceLINX Software

Power Cord

1-year Warranty

Learn more with the

“Switching Handbook:

A Guide to Signal

Switching in Automated

Test Systems”.

www.keithley.com/datalogger 35

Data Acquisition

Product Highlights

Mainframe variations (DMM and keypad/display optional)

High performance (1 Ohm resistor, 10µA DCI range)

7.5 Digit multimeter

High density switching (Up to 720 one-wire multiplexer channels, 2,688 one-wire matrix crosspoints)

Optimized for high throughput scanning and pattern switching

Embedded startup/control software

Use the built-in web server interface to configure the system, build and run an automated scan list, and analyze data.

Series 3700A

The Series 3700A DMM/switch system offers a scalable, instrument grade switching and multi-channel measurement solution for automated testing of electronic devices.

The system includes a high performance DMM with up to six switch/control cards and can support up to 576 two-wire multiplexer channels for unrivaled density and low per channel cost.

Model

(Mainframe)

3706A

3706A-S

3706A-NFP

DMM

Yes

No

Yes

3706A-SNFP No

Model 3706A-NFP eliminates keypad and display for automated test rack applications.

Front Panel

Keypad & Display

Yes

Yes

No

No

Resolution (Digits),

Accuracy

Interface

7½ Digits, 0.0025% GPIB, LAN (LXI), USB-TMC,

TSP-Link

®

Channel Expansion Bus

NA GPIB, LAN (LXI), USB-TMC,

TSP-Link

®

Channel Expansion Bus

7½ Digits, 0.0025% GPIB, LAN (LXI), USB-TMC,

TSP-Link

®

Channel Expansion Bus

NA GPIB, LAN (LXI), USB-TMC,

TSP-Link

®

Channel Expansion Bus

Pricing (USD)

$2,820

$2,170

$2,610

$1,950

Plug-in Cards

3720 Dual 1x30 Multiplexer:

300V, 2A, Auto-

CJC with 3720-ST accessory

3721

3722

3723

3724

Dual 1x20 Multiplexer:

300V, 3A, Auto-

CJC with 3721-ST accessory

Dual 1x48 Multiplexer:

300V, 2A

Dual 1x30 Multiplexer:

200V, 1.25A, Reed

Relay

Dual 1x30 Multiplexer:

200V, 0.12A, Solid

State Relay, Auto-

CJC with 3724-ST accessory

$1,140

$977

$1,580

$1,330

$1,650

Plug-in Cards

3730 6x16 Matrix: 300V, 2A $1,580

3731

3732

3740

6x16 Matrix: 200V, 2A,

Reed Relay

Quad 4x28 Matrix:

200V, 1.2A, Reed

Relay

Independent Relay: 28

Form C: 300V, 3A; 4

Form A: 250VAC, 7A

$2,070

$5,590

$977

3750 Control: 40 Digital I/O

2 Analog Outputs, 4

Counter

$1,330

Recommended Accessories

3706-BAN DMM Adapter Cable $203

3706-TLK Test Lead Kit

KUSB-

488B

4288-1

4288-10

IEEE-488 USB to GPIB

Interface Adapter

Single Fixed Rack

Mount Kit

Fixed Rear Rack Mount

Kit

$308

$502

$87

$110

Ships with Product

Test Script Builder Software Suite CD

Series 3700A Product CD (Includes LabVIEW, IVI C, and IVI.COM Drivers)

Ethernet Crossover Cable

Calibration Certificate

Quick Reference Manual

Power Cord

1-year Warranty

Learn more with the

“Optimizing Switched

Measurements with the

Series 3700 System

Switch/Multimeter and

Series 2600 System

SourceMeter

®

Instruments

Through the Use of TSP” application note.

36 www.keithley.com/datalogger

Low-Level Instrument Selection

Low-Level Instruments

Scientists and researchers worldwide rely on Keithley Electrometers,

Picoammeters, and Nanovoltmeters for making low-level measurements beyond the capabilities of a typical digital multimeter. Keithley

Electrometers and Picoammeters provide low current and high resistance measurements and Keithley Nanovoltmeters measure low voltages.

2182A

Nanovoltmeter

Current Min/Max

Voltage Min/Max

--

1nV / 100V

Resistance Min/Max 10n Ω /1G Ω

(with Model 6220 or 6221)

Resolution 7½ Digits

Input Connection /

Interface

Starting Price

Low Thermal / GPIB, RS-232

$2,980

6220 / 6221

Current Sources

100fA / 100mA

--

10n Ω/1GΩ

(with Model 2182A)

4½ Digits

3 Slot Triax / GPIB,

RS-232 (LAN on 6221)

$3,360

6485, 6487 / 6482

Picoammeters / Picoammeter

& Voltage Source

1fA / 20mA

--

10 Ω/1PΩ

(with Model 6487)

5½ Digits (6485, 6487)

6½ Digits (6482)

BNC (6485) 3 Slot Triax (6482, 6487) /

GPIB, RS-232

6514 / 6517B / 6430

Electrometers

10aA / 100mA

1mV / 200V

10m Ω / 10PΩ

5½ Digits (6514, 6517B)

6½ Digits (6430)

3 Slot Triax / GPIB, RS-232

$1,640 $4,440

Choosing Your Specialized Low Level Instrument

To help you choose the appropriate specialized low level instrument for your application, the most common selection criteria are listed below, including helpful tips for determining the correct specialized low level instrument for your requirements.

Resolution means how fine a meter’s measurement is and lets you determine if it’s possible to see a small change in the signal.

Resolution is described by digits and counts. A 6.5-digit instrument can display six full digits ranging from 0 to 9, and one

“half” digit that displays either a 1 or is left blank. A 6.5-digit instrument can display up to 1,999,999 counts of resolution.

Accuracy is the largest allowable error that will occur under specific operating conditions and is an indication of how close the instrument’s displayed measurement is to the actual value of the signal measured. Accuracy is typically expressed as a percent of reading. For example, an accuracy of 1% of reading means that, for a displayed reading of 100 volts, the actual value of the voltage is between 99 volts and 101 volts.

Measurements

Low current/high resistance measurements evaluate the insulation qualities of materials or components. Typically, a voltage up to 500 or 1000 volts is applied and the resulting current is measured, which can be in the range of picoamperes (10E-12A) or lower. A digital multimeter may seem like the right instrument for these measurements. But if the current is below 1µa or the resistance is above 10M Ω, the correct solution is an Electrometer or

Picoammeter.

Low Voltage/Low Resistance

Measurements

Low resistance/low voltage measurements evaluate the conduction or contact qualities of materials or components.

Typically, a current under 100mA but as low as 1µa is applied and the resulting voltage is measured, which can be in the range of microvolts and even nanovolts. For low voltage, choose a

Nanovoltmeter or low noise multimeter. For low resistance, a

Nanovoltmeter/current source combination or switch/multimeter is the correct solution.

www.keithley.com/sensitive 37

Low-Level Instruments

2182A Nanovoltmeter

The two-channel Model 2182A Nanovoltmeter is optimized for making stable, low noise voltage measurements and for characterizing low resistance materials and devices reliably and repeatably. It provides higher measurement speed and significantly better noise performance for voltage meters than alternative low voltage measurement solutions.

Model

2182A

Voltage

1nV – 100V

Temperature

-200°C – 1820°C

Resistance

10n

Ω to 200MΩ

(requires 6220 or 6221)

Channels

2

Product Highlights

Low noise voltage measurements at high speeds

Delta mode coordinates measurements with a reversing current source at up to 24Hz with 30nV p-p noise (typical) for one reading. Averages multiple readings for greater noise reduction

Built-in thermocouple linearization and cold junction compensation

Dual channels

Comparison of the

Model 2182A’s DC noise performance with a nanovolt/ micro-ohmmeter’s.

Buffer Size

1,024 rdgs

Results from a Model 2182A and Model 6220 using the delta mode to measure a

10m

Ω resistor with a 20µA test current.

Pricing (USD)

$2,980

Recommended Accessories

6220 DC Precision Current

Source (used with

2182A for low current/ voltage measurement)

$3,360

$4,480 6221

4288-1

4288-2

AC and DC Current

Source (used with

2182A for low current/ voltage measurement)

Single Fixed Rack

Mounting Kit

Dual Fixed Rack

Mounting Kit

KPCI-

488LPA

KUSB-

488B

2107-30

IEEE-488 Interface/

Controller for the PCI

Bus

I EEE-488 USB-to-

GPIB Interface Adapter

Low Thermal Input

Cable with spade lugs,

9.1m (30 ft)

2182-KIT Low Thermal

Connector with strain relief

2187-4 Input Cable with safety banana plugs

$87

$121

$431

$502

$306

$173

$363

Recommended Accessories

2188 Low Thermal

Calibration Shorting

Plug

$204

7007-1 $108

7007-2

7009-5

8501-1

8501-2

8503

Shielded GPIB Cable,

1m (3.2 ft)

Shielded GPIB Cable,

2m (6.5 ft)

Shielded RS-232

Cable, 1.5m (5 ft)

Trigger Link Cable,

1m (3.2 ft)

Trigger Link Cable,

2m (6.5 ft)

Trigger Link Cable to 2 male BNC connectors

$119

$54

$62

$68

$85

Ships with Product

2107-4 Low Thermal Input Cable with Spade Lugs,

1.2m (4 ft)

User Manual

Service Manual

Contact Cleaner

Power Cord

Alligator Clips

Learn more with the “Low-Level

Pulsed Electrical

Characterization with the Model 6221/2182A

Combination” application note.

38 www.keithley.com/model2182A

Low-Level Instruments

Product Highlights

10E+14 Ohms output impedance ensures stable current sourcing into variable loads

64k-point source memory for comprehensive test current sweeps

(Model 6221) Source AC currents from 4pA to 210mA peak to peak for AC characterization of components and materials. The 10MHz output update rate generates smooth sine waves up to 100kHz

Perform, analyze, and display differential conductance measurements.

6220 / 6221 Current Sources

Keithley precision current sources include both broad-purpose Model 6220 and high-performance Model 6221. Their high sourcing accuracy and built-in control functions make them ideal for Hall Effect, resistance (using delta mode), pulsed, and differential conductance measurements. Programmable pulse widths limit power dissipation.

Model

6220

6221

Current

100fA – 100mA

100fA – 100mA

Resistance

10n

Ω to 200MΩ

(requires 2182A)

10n

Ω to 200MΩ

(requires 2182A)

Sweep Points

65,536 (64k)

65,536 (64k)

Measurements are line synchronized to minimize

50/60Hz interference.

PC Interface

GPIB, RS-232

GPIB, RS-232,

Ethernet

Pricing (USD)

$3,360

$4,480

Recommended Accessories

2182A Nanovoltmeter (used with 6220/6221 for low current/voltage measurement)

$2,980

$214 237-ALG-2 Low Noise Triax Cable,

3-slot triax to alligator clips

7007-1

7007-2

Shielded GPIB Cable,

1m (3.2 ft)

Shielded GPIB Cable,

2m (6.5 ft)

7007-4

7009-5

Shielded IEEE-488

Cable, 4m (13.1 ft)

Shielded RS-232

Cable, 1.5m (5 ft)

$108

$119

$135

$54

7078-

TRX-3

7078-

TRX-5

7078-

TRX-10

7078-

TRX-20

Low Noise Triax

Cable, 3-Slot Triax

Connectors, 0.9m (3 ft)

Low Noise Triax

Cable, 3-Slot Triax

Connectors, 1.5m (5 ft)

Low Noise Triax

Cable, 3-Slot Triax

Connectors, 3m (10 ft)

Low Noise Triax

Cable, 3-Slot Triax

Connectors, 6m (20 ft)

$150

$161

$174

$195

Recommended Accessories

8501-1 Trigger Link Cable with male Micro-DIN connectors at each end, 1m (3.3 ft)

$62

4288-1 $87

4288-2

KPCI-

488LPA

KUSB-

488B

Single Fixed Rack

Mounting Kit

Dual Fixed Rack

Mounting Kit

IEEE-488 Interface/

Controller for the PCI

Bus

I EEE-488 USB-to-

GPIB Interface Adapter

$121

$431

$502

Ships with Product

6.6 ft (2m), Low Noise, Input Cable with Triax-to-

Alligator Clips

6.6 ft (2m) Trigger Link Cable to connect 622x to

2182A

Ethernet Crossover Cable (6221 only)

Communication Cable between 2182A and 622x

Safety Interlock Connector

Instruction manual on CD

Getting Started manual (hardcopy)

Software (downloadable)

Learn more with the

“Determining Resisitivity and Conductivity Type using a Four-Point

Collinear Probe and the

Model 6221 Current

Source” application note.

www.keithley.com/sources 39

Low-Level Instruments

Product Highlights

Measure currents down to 1fA

Voltage and resistance measurement options

Voltage burden <200µV (most models)

5-1/2 to 6-1/2 digit resolution (most models)

Feedback ammeter design for higher accuracy

Dark current characterization of a photodiode using

Picoammeter and voltage source (such as the Model

6482).

6485, 6487 Picoammeters,

6482 Picoammeter & Voltage Source

Keithley Picoammeters combine sensitive current measurement with high speed.

The Model 6485 Picoammeter offers fast, sensitive current measurement. The

Model 6487 offers improved measurement capability, and adds a high resolution

500V source. The Model 6482 offers two independent Picoammeter/voltage source channels.

Model

6482

6487

6485

MOSFET sub-threshold voltage test using

Picoammeters and voltage sources (such as the Model

6482).

Current Resistance Reading Rate Input Connections

1fA – 20mA (2 ch) N/A

10fA – 20mA 10E+16 Ohms

900 rdgs/s

1000 rdgs/s

10fA – 20mA N/A 1000 rdgs/s

3-slot triax, BNC (via included adapter)

3-slot triax

BNC

Pricing (USD)

$3,650

$3,580

$1,640

Recommended Accessories

4802-10 Low noise BNC Input

Cable, 3m (10ft) (for

6485)

$78

4803 $140

6517-

ILC-3

7007-1

7007-2

7007-4

7009-5

Low Noise Cable Kit

(for 6485)

Interlock Cable for

8009 Resistivity Test

Fixture (6487 Only)

Shielded IEEE-488

Cable, 1m (3.3 ft)

Shielded IEEE-488

Cable, 2m (6.6 ft)

Shielded IEEE-488

Cable, 4m (13.1 ft)

RS-232 Cable

$86

$108

$119

$135

$54

7078-

TRX-10

7078-

TRX-20

7754-3

8501-1

Low Noise Triax Cable,

3.0m (10 ft) (6487 Only)

Low Noise Triax Cable,

6.0m (20 ft) (6487Only)

BNC to Alligator Cable

(for 6485)

Trigger Link Cable with male Micro-DIN connectors at each end, 1m (3.3 ft)

$174

$195

$43

$62

Recommended Accessories

CS-565 BNC Barrel (for 6485) $16

Triax Barrel (for 6487) $105 237-

TRX-BAR

7078-

TRX-BNC

8009

Triax-to-BNC Adapter $73

4288-1

4288-2

KPCI-

488LPA

KUSB-

488B

Resistivity Test Fixture

(for 6487)

Single Fixed Rack

Mounting Kit

Dual Fixed Rack

Mounting Kit

IEEE-488 Interface/

Controller for the PCI

Bus

IEEE-488 USB-to-GPIB

Interface Adapter

$2,210

$87

$121

$431

$502

Ships with Product

7078-TRX-BNCTriax-to-BNC Connector (2×)

(Model 6482)

CA-186-1B Ground Connection Cable, Banana to

Screw-Lug (Model 6487)

CAP-31 Protective Shield/Cap (3-lug) (Model 6487)

CS-459 Safety Interlock Plug (Model 6487)

7078-TRX-3 Low Noise Triax Input Cable, 1m (3 ft)

(Model 6487)

8607 High Voltage Banana Cable Set for Voltage

Source Output (Model 6487)

CAP-18 Protective Shield/Cap (2-lug) (Model 6485)

4801 Low Noise BNC Input (Model 6485)

Learn more with the “Low Current

Measurements” application note.

40 www.keithley.com/lowcurrent

Low-Level Instruments

Product Highlights

Measure low current & high voltage, resistance, and charge

Resistance measurements to 10P Ω ohm

Current sensitivity as low as 10aA (6430)

Voltage burden as low as 200µV

Superior accuracy and sensitivity

This illustrates how the

Model 6514's measurement can be adjusted to reflect the true dark current of the photodiode.

6514 / 6517B / 6430 Electrometers

Our high resistance Electrometers provide voltage source and high resistivity measurements for sensitive measurement. They combine flexible interfacing capabilities with current sensitivity, charge measurement capabilities, resolution, and speed. The Model 6430 offers unmatched low current sensitivity.

Model

6517B

6514

6430

Current

100aA – 20mA

100aA – 20mA

10aA – 100mA

Voltage

10mV – 200V

10mV – 200V

1mV – 200V

Resistance Charge

10E+16 10fC to 2mC

10m

Ω to 200GΩ 10fC to 20mC

1m Ω to >20TΩ --

Input

Connections

3-slot triax

3-slot triax

3-slot triax

A Model 6517B is well suited for application where the volume resistivity needs to be measured.

Pricing (USD)

$7,460

$4,440

$12,800

Recommended Accessories

237-ALG-2 Low Noise Triax Cable,

3-slot triax to alligator clips

$214

$100 6517B-

ILC-3

7078-

TRX-3

7007-1

8501-1

8503

8607

6517-RH

6517-TP

8009

Interlock Cable (For

6517B only)

Low Noise Triax

Cable, 3-Slot Triax

Connectors, 0.9m (3 ft)

Shielded IEEE-488

Cable, 1m (3.2 ft)

Trigger Link Cable, 1m

(3.3 ft)

Trigger Link Cable to 2 male BNCs, 1m (3.3 ft)

1kV Source Banana

Cables (for 6517B only)

Humidity Probe with

Extension Cable

(6517B only)

Temperature Bead

Probe (included with

6517B) (6517B only)

Resistivity Test Fixture

(for 6517B)

$150

$108

$62

$85

$57

$505

$51

$2,210

Recommended Accessories

237-BNC-

TRX

Male BNC to 3-Lug

Female Triax Adapter

(for 6517B)

$105

237-

TRX-NG

$138

7078-

TRX-BNC

7078-

TRX-GND

4288-1

4288-2

6521

6522

KPCI-

488LPA

KUSB-

488B

Triax Male-Female

Adapter with Guard

Disconnected

3-Slot Male Triax to

BNC Adapter

3-Slot Male Triax to

BNC Adapter with guard removed (for

6517B)

Single Fixed Rack

Mounting Kit

Dual Fixed Rack

Mounting Kit

Low Current Scanner

Card (for 6517B)

Voltage/Low Current

Scanner Card (for

6517B)

IEEE-488 Interface/

Controller for the PCI

Bus

IEEE-488 USB-to-GPIB

Interface Adapter

$73

$62

$87

$121

$2,030

$2,730

$431

$502

Ships with Product

Low Noise Triax Cable, 3-slot triax to alligator clips

(6514, 6517B)

6430-322-1B Low noise Triax Cable, 3-slot triax to alligator clips (20cm)

Dual Test Leads (6430)

6517-TP Thermocouple Bead Probe (6517B)

CS-1305 Interlock Connector (6517B)

PreAmp Cable 2m (6.6ft)

Learn more with the “Volume and

Surface Resistivity

Measurements of

Insulating Materials

Using the Model 6517A

Electrometer/High Resistance Meter” application note.

www.keithley.com/highresistance 41

Power Supply Selection

Power Supplies

Tektronix and Keithley power supplies offer a wide range of performance. Get single channel models with superior accuracy and 0.1mA current measurement resolution. For multiple source needs, select a dual channel or triple channel supply. All channels are isolated and fully programmable. For testing battery-operated devices, consider a battery simulator.

Description

Channels

Max Voltage /

Max Current

Resolution

Voltage Accuracy 0.05%

Current Accuracy 0.2%

Interface

Starting Price

Tektronix

PWS2000 Series

(4 models)

Manual

1

Tektronix

PWS4000 Series

(5 models)

USB Programmable

Single Channel

1

Keithley Models

2200 (5 models)

USB and GPIB

Programmable Single

Channel

1

Keithley Models

2220-30-1 &

2230-30-1

USB Multi-Channel

18V-72V / 1.5A-6A

10mV, 10mA

Not Applicable

$407

20V-72V / 1.2A-5A

1mV, 0.1mA

0.03%

0.05%

USB

$904

20V-72V / 1.2A-5A

1mV, 0.1mA

0.03%

0.05%

GPIB, USB

$939

2 (2220-30-1)

3 (2230-30-1)

2-30V / 1.5A

(2220-30-1)

2-30V / 1.5A ,

1-6V / 5A (2230-30-1)

1mV, 1mA

0.03%

0.1%

USB

$964

Keithley Models

2302, 2306,

2308

Battery Simulator

1 (2302)

2 (2306, 2308)

15V / 5A

1mV, 100nA

0.05%

0.2%

GPIB

$2,610

Keithley Models

2303, 2304A

Fast Transient

Response

Single Output

15V / 5A (2303)

20V / 5A (2304A)

1mV, 100nA

0.05%

0.2%

GPIB

$1,980

Choosing Your Programmable Power Supply

To help you choose the appropriate power supply for your application, the most common selection criteria are listed below.

Ensure that the power supply has sufficient voltage output and current output to meet your needs. Also ensure that the supply can deliver the required power. Some power supply V-I output characteristics offer a trade-off between maximum voltage and maximum current (hyperbolic V-I output).

Spurious AC components on the output of a DC supply are called ripple and noise. The term “ripple” refers to periodic AC on the output. When viewed in the frequency domain, ripple shows up as spurious responses. Unlike ripple, which is periodic, noise is random. A power supply’s ripple and noise is specified within a bandwidth, and should be specified for both current and voltage.

Voltage and current settings (sometimes called limits or programmed values) each have resolution and accuracy specifications associated with them. The resolution of these settings determines the minimum increment in which the output may be adjusted. The accuracy describes the extent to which the value of the output matches international standards and is typically expressed as ± (% of reading + offset).

When selecting your power supply, select the supply that has the functionality you need. Consider a multiple-channel supply as a cost-effective solution for applications requiring multiple power sources. For maximum accuracy, consider supplies that have remote sensing. When developing and testing battery-operated devices, consider a special purpose battery-simulating supply.

42 www.keithley.com/highspeedpower

Power Supplies

Product Highlights

Linear regulation

0.05% basic DC voltage accuracy

0.2% basic DC current accuracy

Less than 3 mVp-p ripple and noise

20 user-defined setup memories

The numeric keypad makes it easy to specify a precise current limit before you start your test.

PWS2000 Series

More power. More features. More value. Support many different applications with wide output voltage and current ranges, and down to 10 mV/10 mA resolution. Save time with a numeric keypad for fast and accurate voltage/current selection. Strain less with a bright, large readout digital display. All backed by Tektronix reliability.

PWS Series power supplies are designed to be stacked with other Tektronix bench instruments to save you valuable bench space.

Models

PWS2185

PWS2323

PWS2326

PWS2721

Output Voltage

18 V

32 V

32 V

72 V

Recommended Accessories

RMU2U Rackmount Shelf Kit for 1 or 2 Units

$152

386-7598xx

Rackmount Cosmetic

Filler Panel

$34

Output Current

5 A

3 A

6 A

1.5 A

Recommended Service

SILV100 5-year Extended

Warranty

$156

Programmable

No

No

No

No

Pricing (USD)

$407

$407

$470

$407

Another Product for Consideration

The PWS4000 Series offers greater accuracy, additional features and programmability.

Ships with Product

Calibration Certificate

Technical Reference Manual & Documentation on CD

Power Cord

3-year Warranty

Learn more with the

“Choosing the Right

Power Supply for

Accurate Power

Delivery” application note.

Choosing the Right Power Supply for

Accurate Power Delivery

How to Interpret Linear Power Supply Specifications

Application Note

Specifications

At first glance, a variable DC power supply appears to be a fairly simple device. However, it is a sophisticated, accurate, electrically-rugged workhorse. It has to reliably deliver stable, precise, clean voltage and current, no matter its load -- resistive, inductive, capacitive, low-impedance, highimpedance, steady-state or variable. How well the power in its specifications. Choosing the right power supply for your application requires a good understanding of how they are specified.

www.tektronix.com/pws2000 43

Power Supplies

Product Highlights

Linear regulation

0.03% basic DC voltage accuracy; 0.05% basic DC current accuracy

USB interface for remote programming

Less than 5 mVp-p ripple and noise

Remote sense, list mode and 40 user-defined setup memories

The numeric keypad makes it easy to specify a precise current limit before you start your test.

PWS4000 Series

Precision. Now available at the touch of a button. Generate the power you need with down to 1 mV/0.1 mA resolution and a basic voltage accuracy of 0.03%. Accelerate complex tests with list mode and a USB port for remote programming. Save time with a numeric keypad for fast and accurate voltage/current selection. Performance. Accuracy.

Affordability. Meet your new power supply.

PWS Series power supplies are designed to be stacked with other Tektronix bench instruments to save you valuable bench space.

Models

PWS4205

PWS4305

PWS4323

PWS4602

PWS4721

Output Voltage

20 V

30 V

32 V

60 V

72 V

Recommended Accessories

RMU2U Rackmount Shelf Kit for 1 or 2 Units

$152

386-7598xx

Rackmount Cosmetic

Filler Panel

$34

Output Current

5 A

5 A

3 A

2.5 A

1.2 A

Recommended Service

SILV100 5-year Extended

Warranty

$156

Programmable

Yes

Yes

Yes

Yes

Yes

Pricing (USD)

$904

$1,070

$904

$1,070

$904

Another Product for Consideration

The DMM Series offers accurate voltage, current and resistance measurements for AC and DC signals.

Ships with Product

NI LabVIEW SignalExpress

TE (LE version) Software

Calibration Certificate

Technical Reference Manual & Documentation on CD

Power Cord

3-year Warranty

Learn more with the

“Choosing the Right

Power Supply for

Accurate Power

Delivery” application note.

Choosing the Right Power Supply for

Accurate Power Delivery

How to Interpret Linear Power Supply Specifications

Application Note

Specifications

At first glance, a variable DC power supply appears to be a fairly simple device. However, it is a sophisticated, accurate, electrically-rugged workhorse. It has to reliably deliver stable, precise, clean voltage and current, no matter its load -- resistive, inductive, capacitive, low-impedance, highimpedance, steady-state or variable. How well the power in its specifications. Choosing the right power supply for your application requires a good understanding of how they are specified.

44 www.tektronix.com/pws4000

Power Supplies

Product Highlights

Low noise, linear regulation

0.03% basic voltage output

0.05% basic current accuracy

1mV and 0.1mA output and measurement resolution

Seven programmable output lists with up to 80 steps/ list

GPIB and USB interfaces

Series 2200 rear panel.

Programmable Single Channel DC Power

Supplies with Remote Sensing

Keithley programmable single-channel DC power supplies offer an excellent combination of performance, versatility, and ease of use including 0.03% basic accuracy, 0.1mA measurement resolution, and keypad data entry. Select from a variety of DC power supplies with voltages from 20V to 72V.

Model

2200-20-5

2200-30-5

2200-32-3

2200-60-2

2200-72-1

Max Output Voltage

20V

30V

32V

Max Output

Current

5A

5A

3A

60V

72V

2.5A

1.2A

Power

100W

150W

96W

150W

86W

Recommended Accessories

CS-1638-

12

Rear Panel Mating

Connector, Single

Channel

$14

USB-B-1 USB Cable $14

4299-7

KPCI-

488LPA

7007-05

7007-1

7007-2

7007-3

7007-4

Fixed Rack Mount Kit

IEEE-488 Interface

Board for PCI Bus

Double Shielded

IEEE-488 Cable,

0.5m (1.6ft)

Double Shielded

IEEE-488 Cable,

1m (3.2 ft)

Double Shielded

IEEE-488 Cable,

2m (6.5 ft)

Double Shielded

IEEE-488 Cable,

3m (10 ft)

Double Shielded

IEEE-488 Cable,

4m (13 ft)

$425

$431

$103

$108

$119

$129

$135

Remote sensing compensates for voltage drops in the test leads by extending the power supply feedback loop to the input of the load.

Ripple and Noise Pricing (USD)

<1mVRMS, <3mVP-P $939

<1mVRMS, <4mVP-P $1,110

<1mVRMS, <4mVP-P $939

<1mVRMS, <5mVP-P $1,110

<1mVRMS, <3mVP-P $939

Ships with Product

User Documentation and Driver CD

Rear Panel Mating Connector

Calibration Certificate

Power Cord

3-year Warranty

Learn more with the “Understanding

Linear Power Supply

Specifications” application note.

www.keithley.com/single 45

Power Supplies

Product Highlights

Dual and triple channel models

Two 30V/1.5A channels

One 6V/5A channel (on triple channel model)

All channels are isolated

All channels are programmable

USB interface

Model 2230-30-1 rear panel.

Programmable Multiple Channel DC Power

Supplies with Remote Sensing

Keithley programmable multi-channel DC power supplies offer an excellent combination of performance, versatility, and ease of use including fully isolated channels, fully programmable channels, and all channel measurements displayed simultaneously. Choose either the dual channel DC power supply or the triple channel DC power supply.

Power two isolated circuits with isolated output channels.

Model Max Output Voltage Max Output Current Power Ripple and Noise Pricing (USD)

2220-30-1 Ch 1 : 30V, Ch 2:30V Ch1: 1.5A, Ch 2: 1.5A

45W/channel; 90W total

2230-30-1 Ch1: 30V, Ch 2: 30V,

Ch 3: 6V

Ch1: 1.5A, Ch 2: 1.5A,

Ch 3: 5A

Ch 1 and Ch 2: 45W each

Ch 3: 30W, 120W total

<1mVRMS, <3mV P-P $964

<1mVRMS, <3mV P-P $1,170

Recommended Accessories

CS-1638-

12

Rear Panel Mating

Connector, Multi-

Channel

$14

USB-B-1

4299-7

USB Cable

Fixed Rack Mount Kit

$14

$425

Ships with Product

User Documentation and Driver CD

Rear Panel Mating Connector

Calibration Certificate

Power Cord

3-year Warranty

Learn more with the

“Ensuring that Power

Supply Performance

Meets Your

Requirements” application note.

46 www.keithley.com/multi

Power Supplies

Product Highlights

Optimized for battery-powered device testing

100nA current measurement sensitivity

Load pulse current measurement: 33µs - 833µs

Variable output resistance: 0 - 1 Ω with 10mΩ resolution

Measure sleep, currents, standby currents, and full load currents to determine power consumption

Sink current to simulate a discharged battery

Model 2306 Rear Panel.

Portable Device Battery/Charger Simulator

Keithley's battery simulating power supplies can simulate a battery's output characteristics and its discharged state. These supplies can measure low, sleep mode load current and pulsed output load current. Dual channel models facilitate testing portable device, charge control circuitry with a battery channel and a charger simulator channel.

Model

2302

2306

2308

2

2

Channels

1

Max Output Voltage /

Current

15 V / 5 A

15 V / 5 A

15 V / 5 A

Power

60W

50W

50W

Simplified schematic of a battery and the 2302/2306.

Transient Response to a

10X Load Current Change

<40µs recovery time and

<75mV voltage drop

<40µs recovery time and

<75 mV voltage drop

<35µs recovery time and

<90 mV voltage drop

Current Sink

Capacity

3A

3A

3A

Pricing (USD)

$2,610

$3,240

$2,890

Recommended Accessories

2306-DISP Remote Display

(2302, 2306, 2308)

$335

CS-846 $18

SC-182

4288-1

4288-2

KPCI-

488LPA

KUSB-

488B

Mating Output

Connector

Low Inductance

Coaxial Cable

Single Fixed Rack

Mount Kit

Dual Fixed Rack

Mount Kit

IEEE-488 Interface

Board for PCI Bus

IEEE-488 USB-to-GPIB

Interface Adapter

$1

$87

$121

$431

$502

Recommended Accessories

7007-05 Double Shielded

IEEE-488 Cable,

0.5m (1.6ft)

$103

7007-1 $108

7007-2

7007-3

7007-4

Double Shielded

IEEE-488 Cable,

1m (3.2 ft)

Double Shielded

IEEE-488 Cable,

2m (6.5 ft)

Double Shielded

IEEE-488 Cable,

3m (10 ft)

Double Shielded

IEEE-488 Cable,

4m (13 ft)

$119

$129

$135

Ships with Product

User Documentation

• Rear Panel Mating Connector

• Calibration Certificate

• Power Cord

• 1-year Warranty

Learn more with the

“Simulating Battery

Impedance with the

Models 2302 and 2306

Battery Simulators/

Chargers” application note.

www.keithley.com/battery 47

Power Supplies

Product Highlights

Ultra-fast response times to load changes

Optimized for battery-powered device testing

100nA current measurement sensitivity

Load pulse current measurement: 33µs - 833µs

Measure sleep, standby currents, and full load currents to determine power consumption

Sink current to simulate a discharged battery

Model 2303 or 2304A rear panel.

High Speed Power Supplies

The Model 2303/2304A Power Supplies provide both voltage control and power consumption monitoring for automated testing of portable, battery-operated devices. They are optimized for testing battery-operated, wireless communication devices such as cellular phones that undergo substantial load changes for very short time intervals.

Model

2303

2304A

Channels

Single

Output

Single

Output

Max Output Voltage /

Current

15V/3A or 9V/5A

20V/5A

Power

45W

100W

Transient Response to a

10X Load Current Change

<40µs recovery time and

<100mV voltage drop

<40µs recovery time and

<100mV voltage drop

Current Sink

Capacity

2A

3A

Typical power supply transient response vs.

Keithley’s high speed power supply transient response.

Pricing (USD)

$1,980

$2,660

Recommended Accessories

2304-DISP Remote Display

(2303, 2304A)

$209

CS-846 $18

SC-182

4288-1

4288-2

KPCI-

488LPA

KUSB-

488B

Mating Output

Connector

Low Inductance

Coaxial Cable

Single Fixed Rack

Mount Kit

Dual Fixed Rack

Mount Kit

IEEE-488 Interface

Board for PCI Bus

IEEE-488 USB-to-GPIB

Interface Adapter

$1

$87

$121

$431

$502

Recommended Accessories

7007-05 Double Shielded

IEEE-488 Cable,

0.5m (1.6ft)

$103

7007-1 $108

7007-2

7007-3

Double Shielded

IEEE-488 Cable,

1m (3.2 ft)

Double Shielded

IEEE-488 Cable,

2m (6.5 ft)

Double Shielded

IEEE-488 Cable,

3m (10 ft)

$119

$129

7007-4 Double Shielded

IEEE-488 Cable,

4m (13 ft)

$135

Ships with Product

User Documentation

Rear Panel Mating Connector

Calibration Certificate

Power Cord

1-year Warranty

Learn more with the

“Stabilizing Fast

Transient Response

Power Supply/Load

Circuits” application note.

48 www.keithley.com/battery

Frequency Counter/Timers Selection

Frequency Counter/Timers

Featuring the precision and intuitive operation you’ve come to expect from our oscilloscopes, Tektronix Timer/Counters are built with performance and convenience in mind. Featuring industry-leading resolution, built-in measurement and analysis modes.

Frequency Range

Resolution

Data Transfer

Measurements

FCA3000

400 MHz, 3 GHz, 20 GHz

100 ps (time)

12 digits/s (freq)

250 k Samples/sec (internal)

5 k Samples/sec (block)

13 Automated Measurements

Frequency, Period, Ratio, Time Interval, Time

Interval Error, Pulse Width, Rise/Fall Time,

Phase Angle, Duty Cycle, Vmax, Vmin, Vp-p

Analysis Modes

Connectivity

Starting Price

TrendPlot

, Measurement Statistics, Allan

Deviation, Histogram

Rear panel: USB device port, GPIB

PC communications software: NI LabVIEW

SignalExpress

Tektronix Edition (LE Version)

$2,270

FCA3100

400 MHz, 3 GHz, 20 GHz

50 ps (time)

12 digits/s (freq)

250 k Samples/sec (internal)

15 k Samples/sec (block)

14 Automated Measurements

Frequency, Period, Ratio, Time Interval, Time

Interval Error, Pulse Width, Rise/Fall Time,

Phase Angle, Duty Cycle, Vmax, Vmin, Vp-p,

Totalize

TrendPlot

, Measurement Statistics, Allan

Deviation, Histogram

Rear panel: USB device port, GPIB

PC communications software: NI LabVIEW

SignalExpress

Tektronix Edition (LE Version)

$3,550

MCA3000

27 GHz, 40 GHz

100 ps (time)

12 digits/s (freq)

250 k Samples/sec (internal)

5 k Samples/sec (block)

13 Automated Measurements

Frequency, Period, Ratio, Time Interval, Time

Interval Error, Pulse Width, Rise/Fall Time,

Phase Angle, Duty Cycle, Vmax, Vmin, Vp-p

+ An Integrated Power Meter

TrendPlot

, Measurement Statistics, Allan

Deviation, Histogram

Rear panel: USB device port, GPIB

PC communications software: NI LabVIEW

SignalExpress

Tektronix Edition (LE Version)

$8,860

Choosing Your Timer/Counter

To help you choose the right timer/counter for your needs, the most common selection criteria are listed below, along with helpful tips for determining your requirements.

The frequency resolution is the smallest change the timer/counter can detect in closely spaced frequencies. The resolution is influenced by the time setting on the instrument, i.e., longer time settings (averaged) will display more digits. In general this feature is expressed as the number of digits per second shown on the instrument’s display (e.g. 12 digits/s). More digits indicate a higher frequency resolution.

The internal time base establishes the reference against which input signals are measured. The better the time base, the more accurate your measurements can be. Most counters employ a quartz crystal as the internal time base element which comes in 3 basic types; Room Temperature (RTXO), Temperature

Compensated (TCXO) and Oven Control (OCXO). TCXO and

OCXO devices are more stable and when used as the internal time base the instrument will consistently yield accurate and reliable results.

For timing measurements this feature represents the smallest

“time” change that the instrument can detect. Time resolution is sometimes described as “single shot” resolution and is generally measured in pico seconds, e.g. 50 ps. The lower the number the better the time resolution feature.

When choosing your timer/counter, you should review available analysis modes, such as trend plotting, measurement statistics, histograms and modulation domain analysis to ensure your needs are met.

www.tektronix.com

49

Frequency Counter/Timers

Product Highlights

12 digit/sec frequency resolution

50 ps (FCA3100) or 100 ps (FCA3000) single-shot time resolution

0.001° phase resolution

250 k readings/sec data transfer rate to internal memory

13 automated frequency, time, phase and voltage measurements

See how your device is changing over time with built-in analysis modes –

TrendPlot

, histograms and statistics.

FCA3000/3100 Series

Looking to capture small frequency and time changes? Look no further than this

Timer/Counter/Analyzer. Capture small changes in your signal with industry-leading frequency and time resolution. Quickly and accurately analyze signals with 13 automated measurements and comprehensive built-in analysis modes, including measurement statistics, histograms and TrendPlots. Get unparalleled ease-of-use with intuitive operation and USB connectivity. It’s everything you need in a Timer/Counter/Analyzer. And more.

Easily connect to a PC with the USB and GPIB ports.

Models

FCA3000

FCA3003

FCA3020

FCA3100

FCA3103

FCA3120

Recommended Accessories

174-4401xx

USB Host to Device

Cable, 3 Feet

$10

012-0991xx

GPIB Cable, Double

Shielded

$515

$89 012-1256xx

ACD4000

HCTEK-

4321

RMU2U

TVA3000

BNC Male to BNC

Male, 9 Feet

Soft Carrying Case

Hard Carrying Case

Rackmount Shelf Kit for 2 Units

TimeView

Modulation Domain

Analysis Software

$249

$796

$152

$811

SIGEXPTE NI LabVIEW

SignalExpress ™

Tektronix Edition

Software – Full Version

$779

Max. Frequency

400 MHz

3 GHz

20 GHz

400 MHz

3 GHz

20 GHz

Channels

2

2 – 400 MHz

1 – 3 GHz

2 – 400 MHz

1 – 20 GHz

2

2 – 400 MHz

1 – 3 GHz

2 – 400 MHz

1 – 20 GHz

Instrument Options

MS Medium Stability OCXO

Timebase, 2 X 10

-7

HS High Stability OCXO

Timebase, 5 X 10

-8

RP

$704

$1,110

Rear-panel Connectors $163

Time Resolution

100 ps

100 ps

100 ps

50 ps

50 ps

50 ps

Recommended Service

SILV200 5-year Extended

Warranty (FCA3000,

FCA3003, FCA3100,

FCA3103)

SILV400 5-year Extended

Warranty (FCA3020,

FCA3120)

$260

$415

Frequency

Resolution

12 digit/s

12 digit/s

12 digit/s

12 digit/s

12 digit/s

12 digit/s

Pricing (USD)

$2,270

$3,320

$6,580

$3,550

$4,610

$7,840

Ships with Product

Trial Version of TimeView

Software and NI LabVIEW

SignalExpress

TE (LE version) Software

Calibration Certificate

User Manual on CD

Programmers Guide & Technical Specifications

Power Cord

3-year Warranty

Learn more with the

“Time and Frequency

Measurements for Oscillator

Manufacturers” application note.

Time and Frequency Measurements for Oscillator Manufacturers

Using the FCA3000 and FCA3100 Series Timer/Counter/Analyzers

Application Note

50 www.tektronix.com/fca3000

Frequency Counter/Timers

Product Highlights

12 digit/sec frequency resolution

100 ps single-shot time resolution

250 k readings/sec data transfer rate to internal memory

13 automated frequency, time, phase and voltage measurements

Integrated power meter

See how your device is changing over time with built-in analysis modes –

TrendPlot

, histograms and statistics.

MCA3000 Series

Feature-rich. Fully loaded. No matter how you say it, this microwave timer/counter is packed with functionality. Measure up to 40 GHz signals. And, get two extra 300 MHz timer/counter ports for added versatility. Quickly and accurately analyze signals with

13 automated measurements and comprehensive analysis modes, including statistics, histograms and TrendPlots. Get unparalleled ease-of-use with intuitive operation and USB connectivity. Finally, fully-loaded comes standard.

Easily connect to a PC with the USB and GPIB ports.

Models

MCA3027

MCA3040

Recommended Accessories

174-4401xx

USB Host to Device

Cable, 3 Feet

$10

012-0991xx

GPIB Cable, Double

Shielded

$515

$89 012-1256xx

AC4000

HCTEK-

4321

RMU2U

BNC Male to BNC

Male, 9 Feet

Soft Carrying Case

Hard Carrying Case

$249

$796

$152

TVA3000

Rackmount Shelf Kit for 2 Units

TimeView

Modulation

Domain Analysis

Software

$811

SIGEXPTE NI LabVIEW

SignalExpress

Tektronix Edition

Software – Full Version

$779

Max. Frequency

27 GHz

40 GHz

Channels

2 – 300 MHz

1 – 27 GHz

2 – 300 MHz

1 – 40 GHz

Time Resolution

100 ps

100 ps

Instrument Options

HS High Stability OCXO

Timebase, 5 X 10 -8

US Ultra High Stability

OCXO Timebase,

1.5 X 10 -8

$1,110

$2,230

Recommended Service

SILV600 5-year Extended

Warranty

$620

Frequency

Resolution

12 digit/s

12 digit/s

Pricing (USD)

$8,860

$13,000

Ships with Product

Trial Version of TimeView

Software and NI LabVIEW

SignalExpress

TE (LE version) Software

Calibration Certificate

User Manual on CD

Programmers Guide & Technical Specifications

Power Cord

3-year Warranty

Learn more with the

“Measurement

Statistics, Histograms and TrendPlot

Analysis

Modes” application note.

Measurement Statistics, Histograms and Trend Plot Analysis Modes

Using the Tektronix FCA and MCA Series Timer/Counter/Analyzers

Application Note

“How am I supposed to observe signal integrity, jitter or even drift issues in my frequency measurements with only a numeric readout?” A simple numeric reading gives you only part of the story. An equally important question is: “How stable is the oscillator frequency in my circuit after several periods?”

Understanding this and other questions requires looking at measurement statistics. What is the average value of my signal? What is the standard deviation or Allan deviation of my measurement? Tektronix FCA3000, FCA3100 and MCA3000

Series Timer/Counter/Analyzers offer integrated analysis functions to help you quickly answer these questions. www.tektronix.com/mca3000 51

RF Power Meter Selection

RF Power Meters

Tektronix PSM Power Meter Series delivers the precision accuracy you need and the features you want, including exceptional temperature stability and throughput. Plus, with 13 models to choose from, it also delivers exceptional versatility.

PSM3000

Description

Power Meter

Average Power

Frequency Range

10 MHz - 8 / 18 / 26.5 GHz

Dynamic Range

-55 to +20 dBm

Data Transfer Rate 2000 Reads/sec

Measurements

True Average Power; Duty Cycle Corrected

Pulse Power; Measurement Logging

Starting Price

$2,630

PSM4000

Power Meter

Average / Peak / Pulse

10 MHz - 8 / 18.6 / 20 GHz

-60 to +20 dBm

2000 Reads/sec

Average Power (CW); Duty Cycle Corrected

Pulse Power; Peak Power, Duty Cycle; Peak and Average Burst Power; Measurement

Logging

$2,830

PSM5000

Power Meter

Average / Peak / Pulse + Profiling

50 MHz - 8 / 18.6 / 20 GHz

-60 to +20 dBm

2000 Reads/sec

Average Power (CW); Duty Cycle Corrected

Pulse Power; Peak Power, Pulse Power, Duty

Cycle; Peak and Average Burst Power;

Measurement Logging; Pulse Width, Rise/Fall,

Overshoot, Droop, Time Gated Measurements,

Pulse Waveform Display with Markers

$3,750

Choosing Your RF Power Meter

Power measurements are fundamental to the development cycle of any RF or microwave product, from radios to radars. To help you choose the right Power Sensor/Meter combination, the most common selection criteria are listed below, along with helpful tips for determining your requirements.

Measurement integrity is a combination of the cumulative measurement uncertainty and instrument stability. While the measurement uncertainty is usually specified, the instrument stability includes several factors. By providing calibration over the entire temperature operating ranges and not requiring zeroing prior to measurement, the improved stability of the power sensor/meter reduces possible human errors and assures the integrity of measured results.

Power measurements tend to dominate the test process of wireless device test. The speed of measurement should remain constant over the entire dynamic range of the sensor. USB connectivity and power enable high speed measurement throughput and help reduce system rack space.

Basic power measurements of continuous wave (CW) signals are fundamental to power sensor/meters. However, today’s modern signals include modulation, pulses, or other time-varying attributes. Being able to correct for duty cycle, measure peak power, signal statistics, and triggering inputs and outputs increase the utility of the power sensor/meter combination.

When integrating power measurements into a full system measurement process, you should review the available analysis software and hardware capabilities to determine if equipment redundancies can be eliminated. Advanced measurement analysis, like trend graphing, statistical measurements, measurement logging, and pulse profiling can replace more complex and expensive equipment needs and simplify device test.

52 www.tektronix.com

RF Power Meters

Product Highlights

8 GHz, 18 GHz, 20 GHz, and 26.5 GHz Models

Models Available with N and 3.5 mm Connectors

Dynamic Range as Low as –60 dBm and as High as

+20 dBm

Uncertainty as Low as 2.6%

Reading Rates up to 2000 Readings/sr

Control the power meter and perform measurements using intuitive Windows

® based software.

PSM3000, 4000 and 5000 Series

The PSM3000, PSM4000, and PSM5000 Series are compact power sensors/meters that deliver fast, accurate RF and microwave power measurements. A broad range of CW and pulse modulation measurements are available, depending on the series you choose.

In addition to the USB power & Connectivity port the meters include TTL trigger inputs and outputs for synchronization.

Models

PSM3110

PSM3120

PSM3310

PSM3320

PMS3510

PSM4110

PSM4120

PSM4320

PSM4410

PSM5110

PSM5120

PSM5320

PSM5410

Description

True RMS Average

True RMS Average

True RMS Average

True RMS Average

True RMS Average

Power Meter

(Avg / Peak / Pulse)

Power Meter

(Avg / Peak / Pulse)

Power Meter

(Avg / Peak / Pulse)

Power Meter

(Avg / Peak / Pulse)

Power Meter

(Avg / Peak / Pulse + Profiling)

Power Meter

(Avg / Peak / Pulse + Profiling)

Power Meter

(Avg / Peak / Pulse + Profiling)

Power Meter

(Avg / Peak / Pulse + Profiling)

Recommended Accessories

174-6150xx

USB Cable, 2 m, 20

AWG

$45

174-6164xx

348-2013xx

SMB Female to BNC

Male, 1 m Trigger

Cable

Replacement

Rubber Boot

$69

$22

Frequency Range

10 MHz - 8 GHz

10 MHz - 8 GHz

10 MHz - 18 GHz

10 MHz - 18 GHz

10 MHz - 26.5 GHz

10 MHz - 8 GHz

10 MHz - 8 GHz

50 MHz - 18.6 GHz

50 MHz - 20 GHz

100 MHz - 8 GHz

100 MHz - 8 GHz

50 MHz - 18.6 GHz

50 MHz - 20 GHz

Recommended Service

SILV200 5-year Extended

Warranty (PSM3110,

PSM3120)

SILV400

SILV600

5-year Extended

Warranty (PSM3310,

PSM3320)

5-year Extended

Warranty (PSM3510)

Dynamic Range Connector Style Pricing (USD)

-55 to +20 dBm 3.5mm male

-55 to +20 dBm N-Male

-55 to +20 dBm 3.5mm male

-55 to +20 dBm N-Male

-55 to +20 dBm 3.5mm male

-60 to +20 dBm 3.5mm male

$2,630

$2,630

$3,500

$3,500

$4,460

$2,830

-60 to +20 dBm N-Male

-40 to +20 dBm N-Male

-40 to +20 dBm 3.5mm male

-60 to +20 dBm 3.5mm male

-60 to +20 dBm N-Male

-40 to +20 dBm N-Male

-40 to +20 dBm 3.5mm male

$260

$415

$620

Ships with Product

$2,830

$5,370

$5,370

$3,750

$3,750

$6,380

$6,380

2-meter USB Cable

Calibration Certificate, USB flash drive with User and

Safety Manual, Technical Reference Manual and the

Programmer Manual

3-year Warranty www.tektronix.com

53

Service Solutions

The Tektronix Service

Advantage

Tektronix offers unequalled expertise, global reach and a customer-centric approach with every service option. From our full suite of service plans for Tektronix equipment to our

Multi-Vendor Service (MVS) calibration, we can ensure optimal performance for your entire inventory of test and measurement instruments.

Tektronix Service Highlights

Tektronix Factory Experts

Access to the engineering expertise that designed and built your products to ensure they are in peak performance. Our support engineers hold an average of 20 years of training and experience.

Comprehensive and Thorough Treatment

Software updates, safety and reliability modifications, and cosmetic enhancements are included if applicable.

Products are returned to you in “like-new” condition.

The Tektronix network of service centers offers worldwide support.

Efficiency and Convenience

Our team of professionals focus on getting your instruments back to you as soon as possible, minimizing your downtime and increasing your operating efficiency.

Flexible Repair and Calibration Service

Tektronix offers you the choice of a cost effective, flexible service package to meet your specific business needs.

Tektronix Factory-Certified Service Plans

Silver Care Silver Care Packages Gold Care

Choose between a 3 or 5 year extended warranty plan

No purchase orders, quotes, or approval delays – one phone call away starts the repair process

Covers equipment, parts, labor and transportation

Includes applicable software, safety and reliability updates

Faster repair time than without coverage

(average is 5 days faster

All the benefits of our popular Silver Care

Plan in a convenient take-home package.

Each package includes a unique activation code to effortlessly initiate and manage your service coverage online.

May be purchased any time during the original warranty period

Choose between a 3 or 5 year extended warranty plan

Loaner product of equal or higher performance shipped within 24 hours

Priority access to Global Tektronix

Customer Call Center for technical support

30% discount on scheduled Factorycertified calibration

Coverage of user-caused EOS and ESD damage

Typical downtime of 48 hours or less

Platinum Care

Custom-tailored plan with a typical downtime of less than

1 hour.

Identically configured spare products dedicated to your facility

On-site calibration event and repair coverage

Priority access to technical support, and flexible contract duration and payment terms,

Calibration

Choose from multi-year contracts and single event calibrations

Accredited and traceable calibration

Adjustments included to restore performance

Applicable software, safety, and reliability updates

Calibration records retention

54 www.tektronix.com/service

Service Solutions

Multi-Vendor Service

Comprehensive Calibration and Repair for All Your Test, Measurement and Control Equipment

Service for more than 140,000 instruments from over 9,000 manufacturers

Broadest scope of accreditation; manage 100% of repairs and calibration

100+ global points of service

1 million calibrations annually

Performance

Calibration is the cornerstone of measurement confidence. Now

Tektronix can manage 100% of your calibration and repairs, irrespective of product brand or origin. Our multi-vendor service tools simplify your calibration management program, minimizing downtime and improving operational efficiency.

Global Reach with Local Presence

Tektronix has the most extensive global network of resources.

With more than 100 points of service and 1,000 highly trained experts, our unmatched suite of capabilities and services are available locally to most of the world’s research and manufacturing centers.

Quality & Accuracy

Our comprehensive quality system is unmatched. Choose from multiple NIST traceable certificate options, including ANSI Z540.1,

ISO/IEC 17025 and ISO 9001:2008. Our customers have direct access to the quality they expect from Tektronix’ 65 years as an industry leader in test, measurement and monitoring solutions.

Optimize Asset Availability & Utilization

Tektronix provides industry-leading calibration and repair turnaround time on more than 140,000 products from over

9,000 manufacturers. The CalWeb

®

Asset Management System allows you to actively manage any downtime required for regular equipment maintenance and provides you with online, enterprisewide instrument visibility.

Industry Leader

Tektronix is the industry leading provider of calibration services for the life science, aerospace, and defense industries. With consistent high quality and comprehensive service, customers have turned to Tektronix, making us their first choice for outsourced calibration needs.

For more information on Tektronix multi-vendor service, visit service-solutions.tektronix.com

Or call us at 1-800-438-8165

www.tektronix.com/service 55

Contact Tektronix:

ASEAN / Australia (65) 6356 3900

Austria* 00800 2255 4835

Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777

Belgium* 00800 2255 4835

Brazil +55 (11) 3759 7627

Canada 1 (800) 833-9200

Central East Europe and the Baltics +41 52 675 3777

Central Europe & Greece +41 52 675 3777

Denmark +45 80 88 1401

Finland +41 52 675 3777

France* 00800 2255 4835

Germany* 00800 2255 4835

Hong Kong 400-820-5835

Ireland* 00800 2255 4835

India +91-80-30792600

Italy* 00800 2255 4835

Japan 0120-441-046

Luxembourg +41 52 675 3777

Macau 400-820-5835

Mongolia 400-820-5835

Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90

Middle East, Asia and North Africa +41 52 675 3777

The Netherlands* 00800 2255 4835

Norway 800 16098

People’s Republic of China 400-820-5835

Poland +41 52 675 3777

Portugal 80 08 12370

Puerto Rico 1 (800) 833-9200

Republic of Korea +822-6917-5000

Russia +7 (495) 7484900

Singapore +65 6356-3900

South Africa +27 11 206 8360

Spain* 00800 2255 4835

Sweden* 00800 2255 4835

Switzerland* 00800 2255 4835

Taiwan 886-2-2656-6688

United Kingdom* 00800 2255 4835

USA 1 (800) 833-9200

* If the European phone number above is not accessible,

please call +41 52 675 3777

Contact List Updated March 2013

For Further Information

Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com

Copyright © 2013, Tektronix. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies.

03/13 EA/FCA 48A-25025-11 Technical

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement