CTGSB4N 4110 manual booklet
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting Up Your Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Programming TV/VCR Combo Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programming TV/DVD Combo Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Searching For Your Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
To Change Volume Lock To Another Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Unlocking Volume Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Instructions To The User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setup Codes For Cable Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setup Codes For Cable Box / PVR (or DVR) Combos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setup Codes For Satellite Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setup Codes For Satellite Receiver / PVR (or DVR) Combos. . . . . . . . . . . . . . . . . . . . . . . 12
Setup Codes For TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setup Codes For VCRs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setup Codes For PVRs (or DVRs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setup Codes For TV/VCR Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setup Codes For DVD Players . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setup Codes For DVD Players / VCR Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setup Codes For TV/DVD Player Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setup Codes For TV/VCR/DVD Player Combos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2
INTRODUCTION
The One For All 4 Devices Universal Remote Control is designed to
operate four home entertainment devices, depending on the model purchased (see Key Charts, Mode Keys on the right).
The remote control requires two fresh AAA alkaline batteries (not included)
and easy programming to control your devices.For best results, please
read and perform all instructions listed here.Also, keep these instructions
for future reference.
3
FEATURES AND FUNCTIONS
Use the Key Charts to learn how to use the universal functions of the One For
All 4 Devices Universal Remote Control.
Key Charts
The LED (red light) blinks to show that the
remote control is working and is sending
signals.
Use SET for all programming sequences.
Press POWER once to turn on or off the
selected device.
Device Keys for 4 Devices:
Press VCR, DVD, TV, or CBL/SAT once to select a
home entertainment device to control.
Press SLEEP to activate your device’s sleep
timer (not available for all devices).
Use TV/VID to switch the TV’s input to view TV
or video program.
Use the keypad (0 ~ 9) to directly select channels (for example, 09 or 31).
Press ENTER once after entering channel
numbers on some TV models.
Press PREV CH once to recall the last-viewed
channel and to page back one screen on the
main menu.
Press MUTE once to turn sound off or on.
Use MENU (or EXIT) to choose options (or exit)
from your selected device’s menu or guide.
Use CH + (or CH -) to select the next higher(or
lower) channel.
Use VOL+ (or VOL-) to raise (or lower) the
sound volume.
When controlling a DVD player, use SKIP FORWARD to next DVD chapter., use SKIP REVERSE
to the last DVD chapter.
Press SHIFT and use the Up/Down/Left/ Right
cursor keys to move the cursor in the program guide and menu screens.
Press SHIFT and MUTE to select a menu item.
Use the transport keys to control your VCR,
CD or DVD player, or VOD. To record a program, press the record key (REC) twice.
4
INSTALLING BATTERIES
1. On the remote control’s back, push the tab and lift off the battery
cover.
2. Obtain two (2) new AAA alkaline batteries. Match the + and –
marks on the batteries to the + and – marks in the battery case,
then insert the new batteries.
3. Press the battery cover back into place. The tab should click when
the cover is locked.
4. Test the unit by pressing POWER and any mode key (e.g., TV). If the
batteries are inserted correctly, the LED will blink once.
NOTE: When batteries need replacement, the remote control will stop operating.
Remove the old batteries and insert new ones within 30 minutes to ensure all of
your programming information is restored.
Battery Precautions: Do not mix old and new batteries.• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickelcadmium)batteries.• Always remove old,
weak or worn-out batteries promptly and recycle ordispose of them in accordance with
Local and National Regulations.
SETTING UP YOUR COMPONENTS
The One For All 4 Devices remote control is preprogrammed at the factory to operate an RCA TV and VCR, a Motorola (GI) cable box, and a
Toshiba DVD player. To control devices other than the default brands,
perform the following steps; otherwise skip this section:
NOTE: For TV/VCR Combo control, see the next section.
1. Turn on a device (e.g.,VCR) and, if applicable, insert media, (e.g.,
cassette or disc).
NOTE: Please read steps 2-4 completely before proceeding. Highlight or write
down the codes and device you wish to program before moving on to step 2.
2.
On the remote control, press a device key once (i.e., VCR, DVD,
TV, or CBL/SAT ). Press and hold SET until the LED blinks twice,
then release SET.
3. Use the Manufacturer’s Codes (starting on page 12) to locate the
type of device and brand name and then enter the first four-digit
code for your component. If performed correctly, the LED will blink
twice.
NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try
entering the same code again.
5
4.
Aim the remote control at the device and press POWER once.
The device should turn off. If it does not respond, repeat
steps 2-3, trying each code for your brand until you find one
that works. If it still does not work, try Searching For Your
Code.
NOTE: If the device does not have a POWER key, press the (PLAY) key.
5. Repeat steps 1 through 4 for each device you want to control.
PROGRAMMING TV/VCR COMBO CONTROL
Perform the following instructions to control a TV/VCR Combo:
1. Turn on the TV/VCR Combo and insert a video cassette.
NOTE: Please read steps 2-4 completely before proceeding. Highlight or write
down the codes and device you wish to program before moving on to step 2.
2.
On the remote control, press VCR. Press and hold SET until the
LED blinks twice, then release SET.
3. Use the Setup Codes For TV/VCR Combos (on page 13) to locate the
brand name and then enter the first four-digit code for your device.
If performed correctly, the LED will blink twice.
NOTE: If the LED did not blink twice, then repeat steps 2 through 3 and try
entering the same code again.
4.
Aim the remote control at the device and press POWER once.
It should turn off. If the device does not respond, repeat
steps 2-3, trying each code for your brand until you find one
that works. If it still does not work, try Searching For Your
Code.
NOTE: If the device does not have a POWER key, press the (PLAY) key.
PROGRAMMING TV/DVD COMBO CONTROL
Perform the following instructions to control a TV/DVD Combo:
1.
Turn on your TV/DVD and insert a disc.
2.
On the remote control, press DVD. Press and hold SET until
the LED blinks twice, then release SET.
3. Use the Setup Codes For TV/DVD Combos (on page 15) to locate the
brand name and then enter the first four-digit code for your device.
If performed correctly, the LED will blink twice.
4.
Aim the remote control at your TV/DVD and press POWER.
Your TV/DVD should turn off. If your original TV/DVD
remote control did not have a POWER key, press PLAY.Your
TV/DVD should start to play. If your TV/DVD does not
respond, repeat steps 2-4, trying each code listed for your
brand until you find the one that operates your TV/DVD.
5. Your One For All 4 Devices is now programmed to operate your
TV/DVD.Write your TV/DVD code for future reference.
Remember, if you want to use your One For All 4 Devices to operate
your TV/DVD, press the DVD key first.
6
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all
codes listed for your brand, or if your brand is not listed at all, try
searching for your code. For example, to search for a code for your TV:
1.
On the remote control, press TV once.
2.
Press and hold SET until the LED blinks twice, then release
SET.
3.
Enter 9 - 9 - 1. The LED will blink twice.
4.
Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns
off.
NOTE: In the search mode, the remote control will send IR codes
from its library to the selected device, starting with the most popular
code first.
5.
To lock in the code, press and hold SET until the LED blinks
twice, then release SET.
6. To search for the codes of your other devices, repeat steps 1 through
5, but substitute the appropriate device key for the device you are
searching for.
CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code
procedure, you may need to find out which four-digit code is operating
your equipment:
For example, to find out which code is operating your TV:
1.
On the remote control, press TV once.
2.
Press and hold SET until the LED blinks twice, then release
SET.
3.
Enter 9 - 9 - 0. The LED will blink twice.
4. To view the code for the first digit, press 1 once.Wait 3 seconds,
count the LED blinks (e.g., 3 blinks = 3) and write down the number.
NOTE: If a code digit is “0”, the LED will not blink.
5. Repeat step 4 three more times for remaining digits. Use 2 for the
second digit, 3 for the third digit, and 4 for the fourth digit.
6. To check for codes of other devices, repeat steps 1 through 5, but
substitute the appropriate device key for each device you are checking.
RE-ASSIGNING DEVICE KEYS
The One For All 4 Devices can be set to control a second TV,VCR, or
DVD player.
For example, to control two TVs, a VCR, and a cable box, you will need
to re-assign the unused DVD key to operate the second TV as follows:
1.
On the remote control, press and hold SET until the LED
blinks twice, then release SET.
2.
Enter 9 - 9 - 2. The LED will blink twice.
3.
Press TV once, then press DVD once.
7
4. The DVD key is now ready to be programmed for your second TV.
(See Setting up your components.)
To re-assign other device keys, repeat steps 1 through 4 by substituting
the key sequence from the below chart for the most popular components:
To Re-Assign Key
Sequence Perform
VCR as 2nd TV key:
SET - 9 - 9 - 2 - TV - VCR
VCR as 2nd CBL key:
SET - 9 - 9 - 2 - CBL/SAT - VCR
VCR as 2nd SAT key:
SET - 9 - 9 - 2 - CBL/SAT - VCR
VCR as 2nd DVD key:
SET - 9 - 9 - 2 - DVD - VCR
VCR back to VCR:
SET - 9 - 9 - 2 - VCR - VCR
DVD as 2nd TV key:
SET - 9 - 9 - 2 - TV - DVD
DVD as 2nd CBL key:
SET - 9 - 9 - 2 - CBL/SAT - DVD
DVD as 2nd SAT key:
SET - 9 - 9 - 2 - CBL/SAT - DVD
DVD as 2nd VCR key:
SET - 9 - 9 - 2 - VCR - DVD
DVD back to DVD:
SET - 9 - 9 - 2 - DVD - DVD
When a re-assignment is done, the LED will blink twice to confirm your
choice.At that time, you will need to program the remote control for the
new device (see Setting up your components).
CHANGING VOLUME LOCK
The One For All 4 Devices is set to control the volume of your TV in the
TV,VCR, CBL/SAT, and DVD modes. If you want the volume to be controlled by a mode other than TV (e.g., CBL/SAT), change the Volume
Lock as follows:
To Change Volume Lock To Another Mode:
1.
On the remote control, press and hold SET until the LED
blinks twice, then release SET.
2.
Enter 9 - 9 - 3 and then press any mode key once (except
TV). The LED will blink twice.
3.
Now, whenever you press VOL+, VOL–, or MUTE, volume will
be controlled by your mode choice.
Unlocking Volume Control:
NOTE: Perform these instructions when you want independent volume control for
each
programmed device (e.g., TV volume control in TV mode, CBL/SAT volume control
in CBL/SAT mode, etc.)
1.
On the remote control, press and hold SET until the LED
blinks twice, then release SET.
2.
Enter 9 - 9 - 3 and then press VOL+. The LED will blink four
times.
3. Volume will again be controlled according to its default states.
8
TROUBLESHOOTING
PROBLEM:
SOLUTION:
If you own a satellite that uses code 0775 (Express
Vu and Echostar) and your exit key does not work,
perform the following sequence to activate this feature/function.
1. Press the CBL/SAT key
2. Press and hold the SET key until the red LED
blinks twice
3. Press 9-9-4, the red LED will blink twice
4. Press SET and release (one blink on LED)
5. Press 3-3-6
6. Press the EXIT key, the red LED will blink twice.
The Exit key will now correctly perform the exit
feature/function on your satellite.
PROBLEM:
LED does not blink when you press a key.
SOLUTION:
Replace batteries with four new AAA alkaline
batteries.
PROBLEM:
LED blinks when you press a key, but home entertainment component does not respond.
SOLUTION:
Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet
away.
PROBLEM:
The unit does not control home entertainment devices
or commands are not working properly.
SOLUTION:
Try all listed codes for thecomponent brands being
set up. Make sure they can be operated with an
infrared remote control.
PROBLEM:
TV/VCR combo does not respond properly.
SOLUTION:
Use the VCR codes for your brand. Some combo
units may require both a TV code and a VCR code
for full operation.
PROBLEM:
Changing channels does not work properly.
SOLUTION:
If original remote control required pressing ENTER
to change channels, press ENTER on the remote
control after entering the channel number.
PROBLEM:
Tried “Search Method” and still could not find a
working code.
SOLUTION:
Clear the device key as follows: Press and hold SET
until the LED blinks twice, then release. Next enter 9
- 9 - 2. Then press the device key to be cleared twice.
Now repeat the “Search Method.”
PROBLEM:
CH + and CH - do not work for your RCA TV.
SOLUTION:
Due to RCA design (1983-1987), only the original
remote control will operate these functions.
PROBLEM:
Remote control does not turn on Sony or Sharp
TV/VCR Combo.
SOLUTION:
For power on, these products require programming
TV codes. For Sony, use TV code 0000 and VCR
code 0032. For Sharp, use TV code 0093 and VCR
code 0048.
PROBLEM:
Need additional information.
SOLUTION:
• Please visit : www.oneforall.com
9
INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide a reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment into an outlet or a circuit different from that to which
the receiver is connected.
• Consult dealer or experienced radio/TV technician for help.
LIMITED LIFETIME WARRANTY
Audiovox Electronics Corporation (the “Company”) warrants to you the original
retail purchaser of this product that should it, under normal use and conditions,
be proven defective in material or workmanship during its lifetime while you
own it, such defect(s) will be repaired or replaced (at the Company’s option)
without charge for parts and repair labor. To obtain repairor replacement within
the terms of this Warranty, the product is to be delivered with proof of warranty
coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. This Warranty does not cover
product purchased, serviced or used outside the United States or Canada. This
Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in
the Company’s opinion, the product has been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident, or the simultaneous use of different battery types (e.g.alkaline, standard or rechargeable).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN
NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE
PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities.ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANYCONSEQUENTIAL OR INCIDENTAL DAMAGES
WHATSOEVER. No person or representative is authorized to assume for the
Company any liability other than expressed herein in connection with the sale of
this product. Some states/provinces do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you.
ThisWarranty gives you specific legal rights and you may also have other
rights,which vary from state/province to state/province.U.S.A.: Audiovox
Electronics Corporation, 150 Marcus Blvd., Hauppauge,New York 11788 CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,Unit 3, Door 16,
Mississauga, Ontario L5T 3A5
10
ADDITIONAL INFORMATION
ONE FOR ALL® is the registered trademark of Universal Electronics
Inc. Audiovox Accessories Corporation is the Licensee of the ONE FOR ALL®
brand for North America.
Copyright 2006 by Universal Electronics Inc. No part of this publication
may be reproduced, transmitted, transcribed, stored in any retrieval
system, or translated to any language, in any form or by any means,
electronic, mechanical, magnetic, optical, manual, or otherwise, without
the prior written permission of Universal Electronics Inc.
One For All® 4 Devices is compatibile for use in North America excluding
Mexico.
URC-4110
07/08
11
MANUFACTURER’S CODES
Setup Codes for Cable Boxes
ABC
Pioneer
0533, 1877
Pulsar
0000
0899
Quasar
0000
Bell South
0899
Runco
0000
Digeo
1187
Scientific Atlanta
0008, 1877
Americast
0003, 0008
General Instrument 0003, 0276
Starcom
0003
Jerrold
0276
0003
0003, 0276
Supercable
Memorex
0000
Torx
Motorola
0276, 1187, 1376
Toshiba
0000
Pace
0008, 1877
Zenith
0000, 0899
Panasonic
0000
Paragon
0000
Setup Codes for Cable Box/PVR (or DVR) Combos
Americast
0899
Pioneer
1877
Digeo
1187
Scientific Atlanta
1877
Motorola
1376, 1187
Zenith
0899
Pace
1877
Setup Codes for Satellite Receivers
DirecTV
Dish Network
1377, 0099, 0247, 0392, 0566,
0639, 0724, 0749, 0819, 1076,
1108, 1142,1392, 1442, 1609,
1639, 1640, 1749, 1856
Motorola
0856, 0869
Next Level
0869
Panasonic
0247, 0701
0775
Paysat
0724
Philips
0099, 0724, 0749, 0819, 1076,
1142, 1442, 1749
Pioneer
442
Dish Network System 0775, 1005, 1505, 1775
Dishpro
0775, 1005, 1505, 1775
Echostar
0775, 1005, 1505, 1775
Expressvu
0775, 1775
GE
0392, 0566
General Instrument 0869
Proscan
0392, 0566
Proton
1535
RadioShack
0869
RCA
0392, 0566, 0855, 1392
Samsung
1108, 1142, 1276, 1377, 1442,
1609
GOI
0775, 1775
Hisense
1535
Sony
0639, 1639, 1640
Hitachi
0819
Star Choice
0869
HTS
0775, 1775
Tivo
1142, 1442
Hughes
0749, 1442, 1749
Toshiba
0749, 0790, 0819, 1285, 1749
Hughes Network
Systems
0749, 1142, 1442, 1749
iLo
1535
Jerrold
0869
JVC
0775, 1775
Magnavox
0724
Memorex
0724
Mitsubishi
0749
UltimateTV
1392, 1640
Uniden
0724
US Digital
1535
USDTV
1535
Voom
0869
Zenith
1856
Setup Codes for Satellite Receiver/PVR (or DVR) Combos
DirecTV
1377, 0099, 0392, 0639,
1076, 1142, 1392, 1442,1640
Motorola
0869
Philips
1142, 1442
Dish Network System 0775, 1505
Proscan
0392
Dishpro
0775, 1505
RCA
1392
Echostar
0775, 1505
Samsung
1442
Expressvu
0775
Sony
0639, 1640
Star Choice
0869
Hughes Network
Systems
1142, 1442
continued on next page...
12
MANUFACTURER’S CODES
Setup Codes for TVs
Admiral
0093, 0463
Insignia
1204
Advent
0761, 0783, 0815, 0817, 0842
Inteq
0017
Aiko
0092
JBL
0054
Akai
0030, 0060, 0672, 0702, 0812
JCB
0000
America Action
0180
Jensen
0761, 0815, 0817
Anam
0180
JVC
0053
AOC
0030
KEC
0180
Apex Digital
0156, 0748, 0765, 0767, 0879
Kenwood
0030
Audiovox
0092, 0180, 0451
KLH
0765, 0767
Aventura
0171
KTV
0030, 0180
Bell & Howell
0154
LG
0178, 1265
Bradford
0180
LXI
0047, 0054, 0154, 0156, 0178
Broksonic
0180, 0236, 0463
Magnavox
0030, 0054, 1944, 1963
Candle
0030
Marantz
0030, 0054
Carnivale
0030
Matsushita
0250
Carver
0054
Maxent
1755
Celebrity
0000
Megatron
0145, 0178
Celera
0765
Memorex
0150, 0154, 0178, 0463
Changhong
0765
MGA
0030, 0150, 0178
Citizen
0030, 0060, 0092
Midland
0017, 0047, 0051
Clarion
0180
Mitsubishi
0093, 0150, 0178, 1250
Commercial Solutions 0047
Motorola
0093
Contec
0180
MTC
0030, 0060
Craig
0180
Multitech
0180
Crosley
0054
NAD
0156, 0178
Crown
0180
NEC
0030
Curtis Mathes
0030, 0047, 0054, 0060, 0093,
0145, 0154, 0166, 0451, 0702
NetTV
1755
Nikko
0030, 0092, 0178
CXC
0180
Norcent
0748
Daewoo
0092, 0451, 0672, 1661
Norwood Micro
1286
Denon
0145
NTC
0092
Diamond Vision
1996, 1997
Onwa
0180
Dumont
0017
Optimus
0154, 0166, 0250
Durabrand
0171, 0178, 0180, 0463, 1034
Optonica
0093, 0165
Dwin
0093
Orion
0236, 0463
Electroband
0000
Panasonic
0051, 0250
Electrograph
1755
Penney
Emerson
0154, 0171, 0178, 0180, 0236,
0451, 0463, 1944, 1963
0030, 0047, 0051, 0060, 0156,
0178
Philco
0030, 0054
Envision
0030
Philips
0054, 0690
ESA
0171, 0812
Pilot
0030
Fisher
0154
Pioneer
0166, 0679
Funai
0171, 0180
Polaroid
0765
Futuretech
0180
Portland
0092
Gateway
1755, 1756
Prima
0761, 0783, 0815, 0817
GE
0047, 0051, 0178, 0451
Prism
0051
Gibralter
0017, 0030
Proscan
0047
GoldStar
0030, 0178
Proton
0178
Grunpy
0180
Pulsar
0017
Haier
1034
Quasar
0051, 0165, 0250
Hallmark
0178
RadioShack
0030, 0047, 0154, 0165, 0178,
0180
Harman/Kardon
0054
Harvard
0180
RCA
0047, 0090, 0679
Havermy
0093
Realistic
0030, 0154, 0165, 0178, 0180
Hello Kitty
0451
Runco
0017, 0030
Hisense
0748
Sampo
0030, 1755
Hitachi
0145
Samsung
0030, 0060, 0178, 0702, 0812
iLo
1286
Sansui
0463
Infinity
0054
Sanyo
0154
13
Scotch
0178
Teknika
0054, 0060, 0092, 0150, 0180
Scott
0178, 0180, 0236
Telefunken
0702
Sears
0047, 0054, 0154, 0156, 0171,
0178
TMK
0178
TNCi
0017
0093, 0165
Toshiba
0060, 0154, 0156, 1265
Sheng Chia
0093
TVS
0463
Sony
0000
US Logic
1286
Soundesign
0178, 0180
Vector Research
0030
Squareview
0171
Victor
0053
SSS
0180
Vidikron
0054
Starlite
0180
Vidtech
0178
Superscan
0093
Viewsonic
1755
Supreme
0000
Vizio
1756
SVA
0748
Wards
0030, 0054, 0165, 0178
Sylvania
0030, 0054, 0171, 1944, 1963
Waycon
0156
Symphonic
0171, 0180
Westinghouse
0000, 0451
Tandy
0093
White Westinghouse 0463
Tatung
1286, 1756
Yamaha
0030
Technics
0051, 0250
Zenith
0017, 0092, 0178, 0463, 1265
Techwood
0051
0037, 1237
Sharp
Setup Codes For VCRs
ABS
1972
GoldStar
Admiral
0048, 0209
Gradiente
0000
Adventura
0000
Harley Davidson
0000
Aiwa
0000, 0037
Harman/Kardon
0081
Alienware
1972
Harwood
0072
American High
0035
Hewlett Packard
1972
Asha
0240
HI-Q
0047
Audiovox
0037
Hitachi
0000, 0042
Beaumark
0240
Howard Computers 1972
Bell & Howell
0104
HP
1972
Broksonic
0121, 0184, 0209, 1479
Calix
0037
Hughes Network
Systems
0042, 0739
Canon
0035
Humax
0739
Carver
0081
Hush
1972
CCE
0072
iBUYPOWER
1972
Citizen
0037, 1278
JVC
0067
Colt
0072
KEC
0037
Craig
0037, 0047, 0072, 0240
Kenwood
0067
Curtis Mathes
0035, 0060, 0162, 1035
KLH
0072
Cybernex
0240
Kodak
0035, 0037
CyberPower
1972
Linksys
1972
Daewoo
0045, 1278
Lloyd's
0000
Dell
1972
Logik
0072
Denon
0042
LXI
0037
DirecTV
0739
Magnasonic
0593, 1278
Durabrand
0039
Magnavox
0000, 0035, 0039, 0081, 0593
Dynatech
0000
Magnin
0240
Electrohome
0037, 0043
Marantz
0035, 0081
Electrophonic
0037
Marta
0037
Emerex
0032
Matsushita
0035, 0162
Emerson
0000, 0037, 0043, 0121, 0184,
0209, 0593, 1278, 1479, 1593
Media Center PC
1972
MEI
0035
Fisher
0047, 0104
Memorex
Fuji
0035
Funai
0000, 0593, 1593
0000, 0035, 0037, 0039, 0047,
0048, 0104, 0162, 0209, 0240,
1237
Garrard
0000
Gateway
1972
GE
0035, 0060, 0240, 0807, 1035,
1060
Go Video
MGA
0043, 0240
MGN Technology
0240
Microsoft
1972
Mind
1972
continued on next page...
0240
14
MANUFACTURER’S CODES
Setup Codes for VCRs (continues)
Minolta
0042
Sanyo
0047, 0104, 0240
Mitsubishi
0043, 0067, 0807
Scott
0043, 0045, 0121, 0184
Motorola
0035, 0048
Sears
MTC
0000, 0240
0000, 0035, 0037, 0042, 0047,
0104, 1237
Multitech
0000, 0072
Sharp
0048, 0807
NEC
0067, 0104
Shintom
0072
Nikko
0037
Shogun
0240
Niveus Media
1972
Singer
0072
Noblex
0240
Sonic Blue
0614, 0616
Northgate
1972
Sony
Olympus
0035
0000, 0032, 0035, 0636, 1232,
1972
Optimus
0037, 0048, 0104, 0162, 0593,
1062
Stack 9
1972
STS
0042
Orion
0184, 0209, 1479
Sylvania
Panasonic
0035, 0162, 0616, 1035, 1062
0000, 0035, 0043, 0081, 0593,
1593
Penney
0035, 0037, 0042, 0240, 1035,
1237
Symphonic
0000, 0593, 1593
Systemax
1972
Pentax
0042
Tagar Systems
1972
Philco
0035
Teac
0000
Philips
0035, 0081, 0618, 0739
Technics
0035, 0162
Pilot
0037
Teknika
0000, 0035, 0037
Pioneer
0067
Thomas
0000
Polk Audio
0081
Tivo
0618, 0636, 0739
Presidian
1593
TMK
0240
Profitronic
0240
Toshiba
Proscan
0060, 1060
0043, 0045, 0209, 0845, 1008,
1145, 1972, 1503
Protec
0072
Totevision
0037, 0240
Pulsar
0039
Touch
1972
Quasar
0035, 0162, 1035
Unitech
0240
RadioShack
0000
Vector
0045
Radix
0037
Video Concepts
0045
Randex
0037
Videomagic
0037
0042, 0060, 0240, 0807, 0880,
1035, 1060
Videosonic
0240
Viewsonic
1972
0000, 0035, 0037, 0047, 0048,
0104
Villain
0000
Voodoo
1972
ReplayTV
0614, 0616
Wards
Ricavision
1972
0000, 0035, 0042, 0047, 0048,
0060, 0072, 0081, 0240
RCA
Realistic
Runco
0039
White Westinghouse 0072, 0209
Samsung
0045, 0240, 0739, 1014
XR-1000
0000, 0035, 0072
Sanky
0039, 0048
Zenith
0000, 0039, 0209, 1479
Sansui
0000, 0067, 0209, 1479
ZT Group
1972
1972
Setup Codes for PVRs (or DVRs)
ABS
1972
Microsoft
Alienware
1972
Mind
1972
CyberPower
1972
Niveus Media
1972
Dell
1972
Northgate
1972
DirecTV
0739
Panasonic
0616
Gateway
1972
Philips
0618, 0739
Hewlett Packard
1972
RCA
0880
Howard Computers 1972
ReplayTV
0614, 0616
HP
Samsung
0739
Sonic Blue
0614, 0616
0636, 1972
1972
Hughes Network
Systems
0739
Sony
Humax
0739
Stack 9
1972
Hush
1972
Systemax
1972
iBUYPOWER
1972
Tagar Systems
1972
Linksys
1972
Tivo
0618, 0636, 0739
Media Center PC
1972
15
Toshiba
1008, 1972
Voodoo
1972
Touch
1972
ZT Group
1972
0162, 0593
Viewsonic
1972
Setup Codes For TV/VCR Combos
Broksonic
1479
Optimus
Citizen
1278
Orion
1479
Colt
0072
Panasonic
0162, 1035
Curtis Mathes
1035
Penney
0240, 1035, 1237
Daewoo
1278
Quasar
0162, 1035
Emerson
0593, 1278, 1479
RadioShack
0000
Funai
0000
RCA
0240, 0807, 1035, 1060
GE
0240, 0807, 1035, 1060
Samsung
1014
GoldStar
1237
Sansui
0000, 1479
Harley Davidson
0000
Sanyo
0240
Hitachi
0000
Sears
0000, 1237
Lloyd's
0000
Sony
0000, 1232
Magnasonic
0593, 1278
Symphonic
0000, 0593
Magnavox
0000, 0593
Thomas
0000
Magnin
0240
Toshiba
0845, 1145
Memorex
0162, 1237
Zenith
0000, 1479
MGA
0240
Mitsubishi
0807
Setup Codes for DVD Players
Akai
0695, 0899
Lecson
1533
Alco
0790
Lenoxx
1127, 1938
Apex Digital
0672, 0717, 0755, 0794, 0796,
0830, 1020, 1056, 1061
LG
0741
LiteOn
1158, 1416, 1440
Aspire Digital
1168
Magnavox
Audiovox
0790
0503, 0539, 0646, 0675, 0821,
1268
0539
Blaupunkt
0717
Marantz
Blue Parade
0571
McIntosh
1533
Broksonic
0695
Memorex
0695, 1270
CaliforniaAudio Labs 0490
Microsoft
0522
Citizen
1277
Mintek
0717, 1472
CyberHome
1129
Mitsubishi
0521, 1521
Daewoo
1169, 1172
NAD
0741
Denon
0490
Nesa
0717
Diamond Vision
1316, 1609, 1610
NexxTech
1402, 1830
Disney
0675, 1270
Norcent
1830
Durabrand
1127
Onkyo
0503, 0627
DVD2000
0521
Panasonic
0490, 0503, 0703, 1362, 1462,
1490, 1762
Philips
0503, 0539, 0646, 0675, 1260,
1267, 1354
Pioneer
0525, 0571
Polaroid
1020, 1061, 1316
Emerson
0675, 0821, 1268
Funai
0675, 1268, 1334
Gateway
1073, 1158
GE
0522, 0717
Go Video
0741, 0744, 1044, 1075, 1158,
1304, 1730
GoldStar
Polk Audio
0539
0741
Presidian
0675
Gradiente
0490
Proceed
0672
Greenhill
0717
Proscan
0522
Grundig
0539
RCA
Hitachi
0573, 1247
0522, 0571, 0717, 0790, 0822,
1022, 1132
Hiteker
0672
Regent
1938
iLo
1348, 1472
Rotel
0623
Initial
0717, 1472
Samsung
Insignia
1830
0490, 0573, 0744, 0820, 0899,
1044, 1075
Integra
0571, 0627
Sansui
0695
JVC
0558, 0623, 0867, 1164
Kawasaki
0790
Kenwood
0490
KLH
0717, 0790, 1020, 1149
Sanyo
0695
Sensory Science
1158
Sharp
0630, 0675, 1256
continued on next page...
16
MANUFACTURER’S CODES
Setup Codes for DVD Players (continues)
Shinsonic
0533
Theta Digital
0571
Sony
0533, 0864, 1033, 1431, 1533
Toshiba
0503, 0695, 1045, 1154
Superscan
0821
Urban Concepts
0503
Sylvania
0675, 0821, 1268
Venturer
0790
Symphonic
0675, 1268
Xbox
0522
Teac
0790
Yamaha
0490, 0539
Technics
0490, 0703
Zenith
0503, 0741
Setup Codes For DVD Player/VCR Combos
Apex Digital
1061
Polaroid
1061
Broksonic
0695
Presidian
0675
Emerson
0675
RCA
0522, 0822
Funai
0675
Samsung
0820, 1044, 1075
Go Video
0741, 0744, 1044, 1075
Sansui
0695
GoldStar
0741
Sharp
0630
JVC
0867, 1164
Sony
0864, 1033, 1431
LG
0741
Sylvania
0675
Memorex
0695
Symphonic
0675
Panasonic
1762
Toshiba
0503
Philips
0675, 1267
Zenith
0741
Setup Codes For TV/DVD Player Combos
Akai
0695
Mintek
1472
Apex Digital
0830
Panasonic
1490
Broksonic
0695
Philips
1260
Diamond Vision
1610
RCA
1022
Emerson
0675, 1268
Samsung
0899
Hitachi
1247
Sansui
0695
iLo
1472
Sylvania
0675, 1268
Initial
1472
Toshiba
0695
Magnavox
1268
Setup Codes For TV/VCR/DVD Player Combos
Akai
0899
RCA
Diamond Vision
1609
Sharp
0630
Emerson
0821
Superscan
0821
Funai
1334
Sylvania
0821
Magnavox
0821
Toshiba
1045
Panasonic
1362, 1462
17
1132
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement