advertisement
EDWARDS Catalog u Strobes, Horns, Bells, Chimes
L I F E S A F E T Y
&
I N C I D E N T M A N A G E M E N T
Horn/Siren
Combination
5520D Series
E14660
Overview
EDWARDS 5520D series Duotronic signals are 24 Vdc diode-polarized, heavy duty, high-decibel signaling appliances for use in fire alarm applications where a supervised signal is required. Colored sage gray, 5520D Series signals will finction as either a horn or siren by setting an internal tamper-proof switch.
The 5520D Horn/Siren has no moving parts or contacts to wear out. It requires no maintenance or lubrication. The horn/siren operates with very low current consumption and does not require extra current on start-up. The horn’s predominant frequency is 1.1 KHz.
When horn output is selected, the frequency rises and falls from
300 to 3000 Hz every 3 seconds.
Once mounted, the horn/siren switch is tamperproof. The horn is suitable for coded applications, while the siren is not. The 5520D
Series can be made suitable for outdoor weatherproof applications by adding the EDWARDS catalog number 349 Backbox.
Standard Features
• No moving parts
• High dB output
• Suitable for coded signals (horn mode only)
• Swivel/adjustable mounting
• Outdoor/weatherproof option
• Diode polarized
• Low current draw, no inrush current
• Mounts to one-gang opening
Application
5520D signals signals are ideal for indoor or outdoor applications including schools, factories, commercial occupancies, and lumber yards. They can be used where standard bells or horns are not satisfactory, particularly in areas of high noise level. The unit will function as a Horn or Siren with just the flick of a switch.
Page 1 of 2 D A T A S H E E T
E85001-0391
Not to be used for installation purposes.
Issue 1
LIFE SAFETY & INCIDENT MANAGEMENT
Contact us...
Email: [email protected]
Web: Edwards-fire.com
EDWARDS is a UTC brand.
1016 Corporate Park Drive
Mebane, NC 27302
© 2016 United Technologies Corporation.
All rights reserved.
Installation
5520D Series signals include a universal mounting plate that permits mounting to a standard single gang, 3¼, 3½, or 4-inch octagon outlet box, or a 4-inch square box. It may also be installed without a box directly to the wall or ceiling. The megaphone may be swivelled through 180° horizontally and 90° vertically. All wiring is made to colour-coded wire leads attached to a quick-disconnect plug. When complete, the device just plugs-in and is locked to the mounting plate with a set screw. For weatherproof installations, use a
EDWARDS Cat. No. 349 back box, ordered separately.
Wiring
Warning: Install this device in accordance with the supplied installation instructions, and applicable editions of the NFPA codes and standards, and the Canadian Electrical
Code (Part 1, Section 32), CAN/ULC-
S524, Standard for the Installation of Fire
Alarm Systems, and in accordance with the local authorities having jurisdiction.
Caution: These devices will not operate without electrical power. As fires frequently cause power interruptions, we suggest you discuss further safeguards with your fire protection specialists.
Specifications
Nominal Operating Voltage
Current Draw
Sound Pressure Output
Horn Characteristic
Siren Characteristic
Wiring Connections
Finish
Approvals
20 - 24 Vdc
350 mA
Horn – 114 dBA at 10 ft (3m); Siren – 112 dBA at 10 ft (3m)
Predominant 1.1 KHz (Suitable for coded signals)
Rises and falls 600 to 1300 Hz every three seconds
(Not suitable for coded signals)
Color-coded wire leads with quick-disconnect plug
Metallic gray enamel
UL, ULC, FM
Ordering Information
Cat. No.
5520D-AW
Description
Horn/Siren Combination - 24 Vdc
Accessories
349 Weatherproof Backbox
Ship Wt.
25 lb (11.5kg)
0.5lb (0.2kg)
Page 2 of 2 D A T A S H E E T
E85001-0391
Not to be used for installation purposes.
Issue 1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project