a2la - Medline
ISO 17025 ACCREDITED (A2LA)
ISO GUIDE 34 ACCREDITED (A2LA)
ISO 9001 QUALITY-CERTIFIED (DNV)
TABLE OF CONTENTS
Traceable® Products
ISO 17025 Calibration laboratory
All Traceable® products are provided with a Traceable® Calibration Certificate from our ISO 17025
calibration laboratory. Timer, thermometer, hygrometer, barometer, tachometer, gauge pressure, differential pressure, scale, balance, conductivity cell, conductivity solution, conductivity meter, UV light
meter, light meter, and caliper certificates are accredited by the American Association for Laboratory
Accreditation (A2LA).
A2LA is widely recognized internationally through bilateral and multilateral agreements and through its
participation in the International Laboratory Accreditation (ILAC) and Multilateral Recognition Arrangement
(MRA). Through A2LA Accreditation, Traceable® Certificates are internationally recognized by Accreditation Agencies and Services in over 75 countries throughout Europe, the Middle East, North America, South
America, Asia, and Africa.
Traceable® Certificate indicates the product is traceable to standards provided by the National Institute
of Standards and Technology (NIST), a U.S. Government agency within the Commerce Department.
The Traceable® Certificate complies with ANSI/NCSL Z540-1.
Certified Reference Materials, ISO Guide 34
ISO Guide 34 provides the highest achievable level of quality assurance, documentation, and accuracy
for chemical standards. All standards are directly traceable to NIST (National Institute of Standards and
Technology) and/or a National Standards Laboratory.
Certified Reference Materials (CRM) are produced in an accredited manufacturing facility, our ISO Guide
34 Accredited Certified Reference Material (CRM) Producer. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis). ISO Guide 34 Certified Reference Material (CRM) Producer
is accredited by American Association for Laboratory Accreditation (A2LA Certificate No. 1750.02).
ISO 9001 Quality Certified
All products are provided from our ISO 9001 Quality Certified Company. This quality certification provides
users with the assurance that they receive only the finest and most reliable products. It is worldwide
recognition of superb quality for innovative electronic products. ISO 9001 Certification insures that every
product is checked and rechecked to provide for absolutely the highest quality. In addition, ISO 9001, in
contrast to other ISO 9000 certifications, requires that the design phase of every product be included in the
quality requirements. The 9001 certification provides that quality is designed into every product beginning
with the first drawing. All products are produced under ISO 9001 and certified by DNV (Det Norske Veritas.)
Trademark reference: Traceable® is a registered trademark of Control3.
Anemometers .....................................................79-81
Barometers.........................................................83-85
Battery Tester ........................................................ 102
Brushes, Anti-Static .............................................. 109
Calculators ..................................................... 122-123
Calipers ..................................................................121
Carts...................................................................... 120
Clocks.................................................................55-59
Conductivity .......................................................88-95
Counters ..........................................................118-119
Controllers ..........................................................66-68
Desiccants/Desiccators .........................................114
Humidity............................................................70-79
with Cable Probes ............................................. 74-77
Internal Sensors .......................................... 70-73, 78
Knife Set .................................................................111
Labtools.......................................................... 106-120
Light Meters ....................................................... 97-99
Manometers ............................................................ 86
Magnifiers........................................................116-117
Measuring Meter ....................................................115
Moisture Meter ........................................................ 87
Multimeters............................................................ 102
Oxygen Meters ........................................................ 96
Pressure/Vacuum Gauges...................................... 86
Pumps ............................................................ 104-105
Slide Holders..........................................................113
Sound Meters .......................................................... 99
SpatulaBalance™ ....................................................121
Spilltray™.................................................................. 95
Stopwatches.......................................................60-64
Tachometers .................................................. 100-101
Thermometers ....................................................3-41
Cable Probes ....................... 3-6, 11-13, 15-17, 19-27
IR Thermometers .............................................. 37-40
Stainless-Steel Probes ....................................... 3-16
Type-K Probes ..................................................30-35
Timers ...............................................................43-54
Key-Chain .........................................................53-54
Mechanical ............................................................. 54
Multichannel ......................................................43-49
Single Channel ..................................................49-54
Wash Bottles ..........................................................110
Weather Station ...................................................... 85
Wipes .................................................................... 108
Through A2LA Accreditation, Traceable® Certificates are internationally recognized by
the following Accreditation Agencies and Services in these countries:
Albania
DPS
Argentina
OAA
Armenia
SARM
Egypt
EGAC, NLAB
El Salvador
NCST
Kenya
KENAS
Republic of
Korea,
Singapore
SAC
Uzbekistan
UZSTANDARD
Vietnam
VILAS
2
Finland
FINAS
France
COFRAC
Georgia
NBA
Kyrgyzstan
Luxembourg
OLAS
Malaysia DSM
Mauritius
MAURITAS
México
EMA, IAAC
Slovenia
SA
South Africa
NLA, SADCA,
SANAS
Spain
ENAC
Sweden
SWEDAC
Kyrgyzstandard
Slovakia
(Slovak Rep)
SNAS
Germany
DACH, DAP,
DAR, DASMIN,
DATech, DKD,
EUROLAB
Greece
ESYD
Croatia
(Hrvatska)
HAA, HMD
Cuba
ONARC
Cyprus
CYS
Czech
Republic
CAI
Ecuador
OAE
CNAL
Denmark
DANAK
HKACL, HKAS
India
NABL
Indonesia
KAN
Iran
IAS
Ireland
INAB
Israel
ISRAC
Italy
SINAL, SIT
Japan
IAJapan,
JAB, JLA
Jordan
JISM
Kazakhstan
CAC-MAS-Q
Morocco
MCA
Netherlands
AEAO, RvA
New Zealand
IANZ
Norway
NA,
NORDTEST
Pakistan
PNAC
Philippines
BPSLAS
Poland
PCA
Portugal
IPAC
Romania
RENAR
Tajikistan
Thailand
BLQS-DMSc,
TLAS/TISI
Trinidad &
Tobago TTBS
Tunisia
TUNAC
Turkey
TURKAK
Ukraine
NAAU
United Arab
Emirates
DAC, ENAS
United
Kingdom IFIA,
UKAS
United States
of America
NIST
Canada
CAEAL,
QMP-LS,
SCC
Chile
INN
Guatemala
OGA
Hungary
EURACHEM,
NAT
Moldova, Rep/.
Mongolia
MNCCI
Switzerland
SAS
Taiwan
TAF
Brazil
Belgium
BELAC (BKO CITAC, CGCRE/
INMETRO
and BELTEST
sections)
Austria
BMWA
KOLAS
Russian
Federation
AAC Analitica,
RTO
Belarus
Gosstandart
Australia
NATA
Center of
Accreditation in the
field of Conformity
Assessment of
the Republic of
Moldova
The Agency for
Standardization,
Metrology, Certification
and Trade Inspection
under the Ministry of
Economics and Trade
of the Republic of
Tajikistan
China,
Hong Kong
China,
People’s Republic of
Traceable® Digital Thermometer
ometer
Traceable® Digital Thermometer reads
ds to 0.001°
Scientific thermometer is ideal for critical experimental
rimental requirements,
requirements, quality
control, and routine measurements. Unit readss in °C and °F. Expanded
Expannded
temperature range covers –58.000 to 302.000°F
°F and –50.000 to 150.000°C.
1550.000°C.
Resolution is 0.001°. Accuracy is ±0.05°C between
tween 0.0 to 100°C.
Unit conforms to ITS-90, International
al Temperature Standard
S
Instant MEMORY key recalls minimum and maximum
aximum readings over
oveer
any time period. HOLD key freezes display forr reading later.
For ease in reading, one key changes the display
play to show one,
two, or three significant numbers after the decimal
imal point. Internal
data logger captures the minimum and maximum
um temperatures
every hour for 24 hours. Monitor shows exactlyy when a reading
occurred. High precision makes unit ideal for measuring
temperatures in cuvettes, gas systems, reagents,
nts, chemical
solutions, soil, water baths, ovens, incubators, pharmaceuticals,
petroleum products, foods, and wastewater. Designed
esigned for years
of reliable service even in severe environments.
s. Large, 12.7 mmhigh, bright, high-contrast LCD makes the thermometer
rmometer easy to
read. Membrane keys provide a splash-proof design.
Lightning-fast temperature changess
Air Probe
The fast-response probe supplied with the unitt displays even
the slightest temperature change instantly. Readings are
updated three times a second. Universal, stainless-steel probe
is triple purpose for liquid, air/gas, and semisolids. Accurate
readings with tip penetration of 8.4 mm. Probe has a diameter
of 3.2 mm, stem length of 160 mm, an overall length of 230
mm and a cable length of 1.5 meters.
Measures air temperatures.
Dimensions: 0.3 cm diameter, 10
cm stem length, 15.25 cm overall
length, 183 cm cable length.
Traceable to NIST for accuracy
Micro Probe
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards
and Technology). Size: 89 x 140 x 32 mm. Weight: 226.8 g.
Supplied: probe, 9-volt alkaline battery, plastic carrying case,
Traceable® Certificate.
Stainless-steel, 0.1 cm diameter,
7 cm stem length, 14 cm overall
length, 152 cm cable length.
Description
Cat. No.
Traceable Digital Thermometer with probe
4000
Replacement Probe for Cat. No. 4000
4001
Traceable Digital Thermometer for YSI Series
400 probes— Identical to Cat. No. 4000 thermometer but accepts only YSI series
4005
®
®
400 probes. Supplied without probe.
Traceable® Digital Thermometer for YSI Series
400 probes— Identical to Cat. No. 4000 thermometer accepts only YSI
series 400 probes. Supplied with YSI probe.
4006
Air Probe
4023
Micro Probe
4021
Surface Probe
Surface Probe
4022
Accessory probe
Data Acquisition System (complete description on page 103)
4235
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
Measures surface temperatures. Dimensions:
0.8 cm disk diameter, 9 cm stem length, 15.25
cm overall length, 178 cm cable length.
3
Traceable® Platinum Ultra-Accurate Digital Thermometer
hermometer
Platinum sensor insures linear response and high accuracy across the entire range.
ge. Range: –200.00
to 500.000°C (–328.00 to 932.000°F). Resolution: 0.001° or 0.0001°. Accuracy: ±0.05
±0.05°C
5°C between
–80 to 250°C. High-precision unit is designed for years of reliable service even inn the most severe
ucts, wastewater,
w
environments. Thermometer is ideal for foods, pharmaceuticals, petroleum products,
ash-pproof and
gas systems, soil, ovens, and electronics manufacturing. Membrane keys are splash-proof
e, or four
f significant
easy to operate. Decimal-placement key changes display to show one, two, three,
ings every hour for
numbers after decimal. Internal data logger automatically captures Min/Max readings
quids, air/gas, semilast 24 hours. Instant response probe updates readings 3 times per second for liquids,
ws
solids. HOLD allows user to freeze display for reading later. Computer output allows
readings to be captured in real time.
Handle Probe Model: fast-response, 4-wire, platinum, waterproof, stainless-steel
probe. Handle probe: 0.13-inch diameter x 6.3 inch stem length, 9-inch overall,
5-foot cable, waterproof, for liquids, air/gas, and semi solids with readings at tip
penetration of 0.3-inch. Bullet™ Probe Model: fast-response, 4-wire, platinum,
waterproof, stainless-steel. Bullet™ probe: ¼-inch diameter x 1-inch long, with highh
temperature (500°C) 10-foot flexible glass cable, waterproof, for liquids, air/gas, and
semi solids.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
videdd from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology). Size: 3½ x 5½ x 1¼-inch. Weight: 8 ounce. Supplied: battery, platinum
latinum
um probe/cable
probe/cable, plastic carrying
case, Traceable® Certificate.
Description
Probes
Cat. No.
Traceable® Platinum Ultra-Accurate Digital Thermometer
Stainless-steel with handle
6412
Traceable® Platinum Ultra-Accurate Digital Thermometer
Bullet™
6413
Accessories
Handle Probe Low-Temp Cryo Platinum stainless-steel, range –196 to 150°C
6422
Bullet Probe Low-Temp Cryo Platinum stainless-steel, range –196 to 150°C
6423
™
Available June 2013
Traceable® Extra-Extra Long-Probe Waterproof Thermometer
Extra-long probe, 20 inches created for deep vessels. Thermometer is ideal
for placing in large beakers/flasks, vats, pails, and drums. Applications include
foods, pharmaceuticals, and industrial plants. Waterproof (IP67) to a depth
of 10 feet meter/probe/cable. Jumbo LCD can be read at 70 feet. Accurate
readings with tip penetration of only 1 inch. Stainless-steel spring-powered
holder for ease in placing probe anywhere. Wall mount provides instant
viewing, indoor/outdoor use.
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology).
Range: 14.0 to 230.0°F (–10.0 to 110.0°C). Resolution: 0.1°. Accuracy: ±1°C. Probe:
waterproof, stainless-steel, 20 inches length x 0.2 inches diameter. Probe handle:
waterproof, chemical-resistant, length 2½ inches. Cable length: Waterproof 10 feet (3
meters). Probe holder: stainless-steel, spring-loaded clamp, rugged construction. Size:
4¾ x 31/3 x 1¼-inch. Weight: 7 ounces. Supplied: stainless-steel probe/spring-loaded
holder, wall mount, batteries, Traceable® Certificate.
4
Description
Cat. No.
Traceable® Extra-Extra Long-Probe Waterproof Thermometer
6406
Probe
holder
Traceable® Platinum High-Accuracy Freezer Thermometer
Thermometer displays minimum/maximum temperatures for previous 24 hours (for each
hour) and previous 7-days (for each day); or previous 30 days (for each day). Time/
Date stamp key shows the exact time and date for all minimum and maximum readings.
Range: –148.00 to 199.99°F (–100.00 to 199.99°C). Resolution: 0.01°. Accuracy:
±0.1°C. Thermometer is ideal for freezers. Triple display shows current °F/ °C and
minimum/maximum temperatures. Alarm is settable in 0.1° increments and signals
when temperature rises above/falls below set points. LEDs and audible alarm signal
continuously even if temperature returns to non-alarm range. A 4-wire platinum sensor
insures linear response and high accuracy across the entire range.
Supplied platinum waterproof stainless-steel probe provides accurate readings with tip
penetration of 0.3-inch, waterproof cable, and adjustable probe holder or supplied with
platinum waterproof stainless-steel Bullet™ probe and waterproof cable. Handle probe model
features stainless-steel probe, diameter 0.13 inches, stem length 9.0 inches, overall length 12
inches. Bullet™ probe model features PTFE cable to withstand temperatures of –100 to 200°C,
0.25-inch diameter x 1 inch probe. Both models feature a 10-foot waterproof cable.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Size: 2¾ x 4¼ x ¾-inch. Weight: 5 ounces.
Case: high-impact, chemical-resistant ABS plastic. Supplied: platinum probe/cable, bench stand, wall
mount, batteries, Traceable® Certificate.
Description
Probe
Cat. No.
Traceable® Platinum High-Accuracy Freezer Thermometer (patents pending)
Stainless-steel with handle
6410
Traceable® Platinum High-Accuracy Freezer Thermometer (patents pending)
Bullet™
6411
Available June 2013
Traceable® RTD Platinum Thermometer
Fast, one-key operation
Read degrees Fahrenheit or Celsius at the flick of a switch. Innovative 0.01° digital thermometer
developed specifically for lab and plant use is the finest-performing RTD Platinum Thermometer
ever designed. Precise answers make it ideal for experimental requirement. Ease of use makes it
perfect for routine quality-control needs. One-key operation eliminates operator technique errors.
State-of-the-art, fourth-generation aerospace engineering incorporates the most modern and
sophisticated electronics in temperature measurement to achieve utmost in precision, stability, and
dependability. High-precision thermometer is geared specifically for measuring temperatures in
soil, foods, ovens, cuvettes, gas systems, water baths, wastewater, incubators, chemical solutions,
petroleum products, and extremely cold conditions. Manufactured for years of reliable service, even
in severe environments.
Accuracy delivers on-the-dot readings
Resolution is 0.01° below 200° and 0.1° above 200°. Accuracy is ±(0.1% + 0.2°C) below 200°C and
±(0.15% + 0.5°C) above 200°C. HOLD key freezes display for reading later. Fail-safe display shows
low battery and probe condition. Readings are updated 2½ times per second. Jumbo, ½-inch-high
digits and bright, high-contrast LCD make the thermometer easy to read. Computer output allows
thermometer to be connected to computer or data logger for capturing and storing results. To assure
accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology). Platinum (100-ohm) 4-wire probe is triple-purpose
for liquids, air/gas, and semisolids. Probe range is –58 to 752°F and –50 to 400°C. Probe: length
6 inches, diameter 0.13 inch, overall length 9 inches, 40-inch cable. Supplied: probe, battery, and
Traceable® Certificate. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
Description
Cat. No.
Traceable RTD Platinum Thermometer
4132
Data Acquisition System (complete description on page 103)
4136
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
®
Wireless Capable
(see page 103)
5
Traceable® International
Standards Extreme-Accuracy
Digital Thermometer
Four Traceable® International Standards Digital thermometers provide thee
exact readings required for critical requirements, quality control checks, and
routine measurements. Units read 0.00, 25.00, 37.00, or a combination of
all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C
C of
standard. Units read in °C and °F.
Impervious stainless-steel probe
Stainless-steel probe shows the slightest temperature change. Probe is
triple purpose for liquid, air/gas, and semisolids. Accurate readings with
tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of
6¼ inches, overall length of 9 inches and a cable length of 5 feet.
Unit conforms to ITS-90,
International Temperature Standard
High-precision unit is ideal for measuring temperatures in water baths,
cuvettes, gas systems, reagents, standards solutions, ovens, incubators,
pharmaceuticals, petroleum products, foods, and wastewater.
Records time and date for min/max readings and hi/lo alarm alerts
Display shows minimum/maximum and current temperatures. Min/max monitors
readings overnight, on weekends, or for any time period and displays the exact time
and date when the min/max temperature occurred. Alarm provides two visual (LEDs)
and two audio alerts when temperature rises above or falls below high and low set
points. Unit displays the exact time and date when dual thermometer alarms are
triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms
signal continuously even if temperature returns to non-alarm range. First thermometer
ever designed to permit user one-key calibration.
Date and Time of Maximum
Temperature Reading
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). High-impact, chemical-resistant ABS plastic
case is 2¾ x 4¼ x ¾ inches. Weight: 5 ounces. Stand, Velcro®, magnetic
strips, and wall mount allow placing thermometer anywhere. Supplied:
Traceable® Certificate, stainless-steel probe, two batteries.
Traceable® Extreme/
High-Accuracy Thermometers
Dual range is –50 to 70°C with a resolution of 0.01° and
accuracy of ±0.30°C. Two channel thermometers are available
with one or two stainless-steel probes. Two probes are useful in
monitoring inlets and outlets; tracking tests simultaneously; and
measuring temperatures in two locations.
Description
Range
Cat. No.
Traceable® International Standards Extreme-Accuracy Thermometer 0.00°
0.00°
4241
Traceable® International Standards Extreme-Accuracy Thermometer 25.00°
25.00°
4242
Traceable® International Standards Extreme-Accuracy Thermometer 37.00°
37.00°
4243
Traceable International Standards Extreme-Accuracy Thermometer 0.00°, 25.00°,37.00°
0.00°, 25.00°,37.00°
4244
Traceable® High-Accuracy Dual Thermometer (1 stainless-steel probe supplied)
–58 to 158°F and –50 to 70°C
4337
Traceable® High-Accuracy Dual Thermometer (2 stainless-steel probes supplied)
–58 to 158°F and –50 to 70°C
4338
®
6
Traceable® Long-Stem Thermometer
Replaces mercury and glass thermometers
Perfect-sized unit fits into flasks, cuvettes, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents,
water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to
make measurements while stirring solutions in deep vessels. Displays –58 to 572°F and –50 to 300°C. Resolution is 0.1°
from –20 to 200 (1° outside this range). Accuracy is ±1°C between –20 to 120°C. Ultra™ model accuracies are ±0.2 and
±0.5°C at tested points. Readings are updated every second. ABS plastic and stainless-steel construction (no glass or
mercury) makes it safe. Brilliant LCD is ¼-inch-high. Designed for all ovens and incubators.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and
Technology). Case is made of rugged ABS plastic, diameter is 13/16-inch. Stem diameter is 0.14 inch. Weight: less than one
ounce. Supplied: battery, Traceable® Certificate, and protective sleeve.
Description
Stem Length
Overall Length
Range
Accuracy
Cat. No.
Traceable Long-Stem Thermometer
8 inches
11 inches
–58 to 302°F(–50 to 150°C)
±1°C
4052
Traceable® Long-Stem, Ultra™ Thermometer
8 inches
11 inches
–58 to 302°F(–50 to 150°C)
±0.2°C at tested points
4352
Traceable® Extra-Long-Stem, Wide-Range
Thermometer
113/8 -inches
143/8 -inches
–58 to 572°F (–50 to 300°C)
±1°C
4353
Traceable® Extra-Long-Stem, Wide-Range,
Ultra™ Thermometer
113/8 -inches
143/8 -inches
–58 to 572°F (–50 to 300°C)
±0.5°C at tested points
4354
®
Traceable® Pocket Thermometer
Unique, flat-profile design, weight of a single ounce, and built-in pocket clip make
it ideal to carry in a shirt pocket. Thermometer range is –58 to 572°F and –50 to
300°C. Place probe in any solution and enjoy digital resolution of 0.1° from –20
to 200° (1° otherwise). Accuracy is ±1.5°C. Ultra™ model accuracy is ±0.4°C at
tested points. A HOLD key freezes display; another key switches from °F to °C.
Safe for all lab tests
Stainless-steel and plastic construction (no glass or mercury) makes it the safest
lab thermometer ever designed. Measure temperature in soil, cuvettes, test tubes,
food products, incubators, petroleum hydrocarbons, and virtually all lab tests. Probe
guard snaps to the handle and extends overall length to 10¾ inches.
Records minimum/maximum reading
At the touch of a key, memory recalls minimum/maximum temperature readings over any time period. Large, bright LCD is ¼-inch-high and 20
times more readable than eye-straining guesses at pointer or mercury positions. Readings are updated every second. Operates continuously
for 1½ years on a single, replaceable silver-oxide battery. To assure accuracy an individually serial-numbered Traceable® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Unit is supplied with a protective case. Dimensions: stem length, 3½ inches; stem diameter, 0.14
inches; overall length, 7 inches. Weight: 1 ounce.
Description
Accuracy
Cat. No.
Traceable® Pocket Thermometer
±1.5°C
4050
Traceable® Ultra™ Pocket Thermometer
±0.4°C at tested points
4350
7
Traceable® Waterproof/
Food Thermometer
Traceable® Waterproof/Food Thermometer’s membrane
ne
keys, ABS body, and stainless-steel probe make it ideal
eal for
food labs, food processing, food preparation, and brewing.
wing.
Waterproof construction allows it to be used
in labs, plants, wash-down areas, and the field.
Unit eliminates the dangers inherent in
breakable glass and toxic mercury thermometers.
Range is –58 to 572°F and –50 to 300°C, resolution iss 0.1°
from –20 to 200° (1° otherwise), and accuracy is ±1.5°C.
5°C. Ultra™
model accuracy is ±0.4°C at tested points. At the touchh off a key,
k
it displays minimum and maximum readings over any period.
Unique holder allows probe to be positioned at any height while attached to beakers, stainless cylinders, or vats. Flat-profile design, weight
eight
of a single ounce, and built-in pocket clip make it ideal for carrying in a shirt pocket. Probe guard snaps to handle to extend overall length
ength
to 10¾ inches. Readings are updated every second. To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
nstitute of
Standards and Technology). Supplied: probe holder, key-chain, battery, lanyard. Bright LCD is ¼-inch-high. Size: stem length, 3½ inches;
ches;
stem diameter, 0.14 inches; overall length, 7¼ inches. Weight: 1 ounce.
Description
Accuracy
Cat. No.
Traceable® Waterproof Food Thermometer with holder
±1.5°C
4420
Traceable® Ultra™ Waterproof Food Thermometer with holder
±0.4°C at tested points
4421
Traceable® Robo™ Thermometer
Adjustable for ultimate viewing
Rotating digital display (180 degrees) makes for easy reading at any angle. Position the readout at a right angle for a headsup display or straight to view sample and temperature simultaneously. Read temperatures in reagents, water baths, foods,
air, and any semisolid. Extra-wide range covers from –58 to 536°F and –50 to 280°C. Press a key to change between
Fahrenheit and Celsius. Enjoy digital resolution of 0.1° from –20 to 200°. Accuracy is ±1°C between –20 and 100°C.
Ultra™ model accuracy is ±0.4°C at tested points. Readings are updated every second. Stainless-steel probe is resistant to
most laboratory chemicals. Long stem allows for stirring solutions.
Replaces mercury thermometers
Plastic and stainless-steel construction (no glass or mercury) makes it safer than mercury thermometers. It is virtually
indestructible and stores flat in a pocket.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and
Technology). Large, bright LCD digits are ¼-inch-high. Stem dimensions are 8-inch length and a diameter of 0.14 inch.
Overall unit length is 9¼ inches. Weight: less than one ounce. Supplied: battery and Traceable® Certificate.
8
Description
Accuracy
Traceable® Robo™ Thermometer
±1.0°C
Cat. No.
4149
Traceable® Ultra™ Robo™ Thermometer
±0.4°C at tested points
4349
Traceable® Lollipop™ Shock/Waterproof Thermometer
Lollipop™ Thermometer is waterproof
New heads-up Lollipop™ Traceable® Waterproof/Shockproof Thermometer replaces hazardous mercury units.
Stainless-steel probe is resistant to most laboratory chemicals. Wide range covers 99 percent of the lab’s routine
temperature measurements: –58 to 572°F and –50 to 300°C. Resolution is 0.1° from –20 to 200°; 1° outside this
range. Accuracy is ±1°C between 0 and 100°C. Ultra™ model accuracy is ±0.4°C at tested points.
Records minimum/maximum reading
Memory recalls highest and lowest temperature readings over any time period. Reading is updated every second.
Solid-state construction eliminates dangers inherent in breakable glass and toxic mercury thermometers.
All-weather compatible
Operates without fail in any lab condition—outdoors too. Waterproof construction is ideal for wet labs,
wash-down areas, and virtually all field applications. Shockproof in drop tests up to 5 feet. Bright ¼-inch-high
display is easy to view.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Supplied: stainless-steel probe, probe cover, battery. Stem dimensions:
0.14 inch diameter and 8 inch length. Overall unit length is 10¼ inches, width is 1¾ inches, and depth is ½-inch.
Weight: 7/8 ounce.
Description
Accuracy
Cat. No.
Traceable Lollipop Shockproof/Waterproof Thermometer
±1°C
4371
Traceable® Ultra™ Lollipop™ Shockproof/Waterproof Thermometer
±0.4°C at tested points
4378
®
™
Traceable® Digital Dial Thermometer
Range from “brrr” to blistering
Range is –58 to 572°F and –50 to 300°C. Wide temperature span combines the ranges
of more than 90 different mercury thermometers. Place probe in a water bath and enjoy
digital resolution to 0.1° and an accuracy of ±1°C between –20 to 100°C. Ultra™ model
accuracy is ±0.4°C at tested points. Stainless-steel and plastic construction (no glass and
no mercury) makes it the best and safest lab thermometer ever designed. Ideal for use in soil,
cuvettes, test tubes, food products, incubators, biomedical reagents, and petroleum hydrocarbons.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Lightweight for portability
Large, bright 3/8-inch-high LCD (liquid crystal display) is 20 times more readable than eye-straining guesses at pointers or
mercury positions. Readings are updated every 10 seconds. Supplied: protective case, battery, and Traceable® Certificate. Unit
dimensions are 4¾-inch stem length, stem diameter of 0.19 inch, and 1½-inch dial diameter. Weight: 11/8 ounces.
Description
Traceable Digital Dial Thermometer °F
Accuracy
®
Traceable® Digital Dial Thermometer °C
Traceable® Ultra™ Digital Dial Thermometer °F
Traceable® Ultra™ Digital Dial Thermometer °C
±1°C
±0.4°C at tested points
Cat. No.
4042
4044
4342
4344
9
Traceable® Key-Chain Thermometerr
Pocket-size Traceable® Key-Chain Thermometer is perfect forr carrying with you.
youu.
keyss.
Clip to a lab coat buttonhole, jacket zipper, or belt loop, or use it with your keys.
ast, one-second response
respponse
Hang in storerooms or fume hoods for easy monitoring. Fast,
makes it ideal for measuring ambient air temperature. One-inch stainless-steel probe
rements. Provides accurate
acccurate
is designed for penetration of semisolids and liquid measurements.
readings when immersed only 1/3-inch.
Range is –58 to 302°F and –50 to 150°C with a resolution of 0.1° and ann accuracy
accuuracy of
±1° between –20.0 to 100.0°C. Lightweight (½ oz) and miniature size (¾-inchh diameter
dia
x
3¾ inches) make it the convenient pocket thermometer.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
rovided from our ISO
SO 17025
17
calibration
laboratory accredited by A2LA. It indicates traceability to standards provided byy NIST (National Institutee of Standards
S
and Technology). Case is rugged ABS plastic. Supplied battery powers unit for 1 year of continuous operation.
n
Description
Accuracy
Cat. No.
Traceable® Key-Chain Thermometer
±1°C between 20 to 100.0°C
C
4351
Traceable® Jumbo-Display Dial Thermometer
Thermometer reads both °F and °C
Dedicate this thermometer to a specific test. Provides continuous monitoring for over a
year. To provide for even longer battery life, the unit has an on/off switch. Thermometer
is switchable between °F/°C. Wide range of –58 to 302°F/–50 to 150°C covers 90
percent of lab temperature measurements. To achieve this temperature range with
equivalent precision would require over 150 mercury thermometers. Enjoy digital
resolution of 0.1° from –20 to 200° (1° outside this range). Accuracy is ±1°C between
–20 and 100°C. Ultra™ model accuracy is ±0.3°C at tested points. Readings are
updated every second.
Resists corrosion
Smooth, stainless-steel probe is perfect for gunky and viscous solutions. Probe is resistant to most laboratory chemicals. Its piercing tip makes it
perfect for measuring temperatures of semisolids. Plastic and stainless-steel construction makes it safer than mercury thermometers.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Extra-large, easy-to-read
display is 3/8-inch-high. Bright LCD is easier to read than eye straining guesses at pointers or mercury positions. Stem length is 5¼ inches, stem
diameter is 0.15 inch, and top diameter is 21/8 inches. Overall length is 6½ inches. Weight: 1 ounce. Supplied: battery, Traceable® Certificate.
Description
Accuracy
Cat. No.
Traceable Jumbo-Display Dial Thermometer
±1.0°C
4049
Traceable® Ultra™ Jumbo-Display Dial Thermometer
±0.3°C at tested points
4374
±1.0°C
4355
®
Traceable® Surface Dial Thermometer
Identical to Cat. No. 4049 but with ½-inch-diameter metal disk at end of probe for surface measurements.
10
Traceable® Food/Waterproof/Piercing Thermometer
New piercing thermometer measures the internal temperature of stored, frozen,
or prepared food. Stainless-steel probe is ideal for use in soil, brewing, food
processing, refrigeration, and pharmaceutical applications. Waterproof
construction allows it to be used in labs, plants, wash-down areas, and the field.
Manufactured to be drop-proof from 5 feet. Eliminates the dangers inherent in
breakable glass and toxic mercury thermometers. Wide range covers
99 percent of routine temperature measurements: –58 to 536°F and –50 to
280°C. Resolution is 0.1° from –20 to 200°
(1° outside this range). Accuracy is ±1°C between
–20 to 100°C. Ultra™ model accuracy is ±0.4°C at
tested points. Reading is updated every second.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable
aceable® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Large, bright, highly readable LCD is ¼-inch-high. Stem dimensions: 0.19 inch diameter and 8-inch length. Unit dimensions: 9½-inch overall
length, 3½-inch-width, and 1-inch depth. Weight: 1¼ ounces. Supplied: battery and Traceable® Certificate.
Description
Accuracy
Cat. No.
Traceable® Food/Waterproof/Piercing Thermometer
±1.0°C
4370
Traceable® Ultra™ Food/Waterproof/Piercing Thermometer
±0.4°C at tested points
4369
Traceable® Mini-Thermometer
So easy—no instructions needed
Business-card size is perfect to carry anywhere. Fits in tool kit, briefcase, or coat pocket. Small
but powerful unit displays from –58 to 302°F and –50 to 150°C, with a resolution of 0.1° between
–20 and 200°. Accuracy is ±1°C between –20 to 100°C.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our
ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Easy-to-read digits are 3/8-inchhigh. Stainless-steel probe (0.14-inch diameter x 7-inch length) is resistant to most chemicals.
Cable (18-inch length) wraps into a slot around unit and probe clips to unit for easy storage. Size:
3 x 2 x ½ inches. Weight: 1 ounce. Supplied: Traceable® Certificate and silver-oxide battery.
Description
Cat. No.
Traceable® Mini-Thermometer
4146
11
Stainless-Steel Probe Thermometer Specifications Chart
Page
No.
Traceable®
Certificate
Supplied
6412
4
6413
6406
Probe
Length
(inch)
Waterproof
Total Unit/
Cable/Probe
Unit Size
(inch)
Alarm
Display
Min/Max
Range
Resolution
Accuracy
(°C)
Yes
–328 to 932°F / –200 to 500°C
0.001° or 0.0001°
±0.05
6.3
n/y/n
3½ x 5½ x 1¼
no
yes
4
Yes
–328 to 932°F / –200 to 500°C
0.001° or 0.0001°
±0.05
1
n/n/y
3½ x 5½ x 1¼
no
yes
4
Yes
14 to 230°F / –10 to 110°C
0.1°
±1
20
y/y/y
4¾ x 31/3 x 1¼
no
yes
6409
5
Yes
–148 to 199°F / –100 to 199°C
0.01°
±0.1
9
n/n/y
2¾ x 4¼ x ¾
yes
yes
6408
5
Yes
–148 to 199°F / –100 to 199°C
0.01°
±0.1
1
n/n/y
2¾ x 4¼ x ¾
yes
yes
4052
7
Yes
–58 to 302°F / –50 to 150°C
0.1°
±1
8
n/na/y
7
/8 x 11
no
no
4352
7
Yes
–58 to 302°F / –50 to 150°C
0.1°
±0.2*
8
n/na/y
7
/8 x 11
no
no
4353
7
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1
113/8
n/na/y
7
/8 x 143/8
no
no
4354
7
Yes
–58 to 572°F / –50 to 300°C
0.1°
±0.5*
113/8
n/na/y
7
/8 x 143/8
no
no
4050
7
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.5
3½
n/na/y
3x7
no
yes
4350
7
Yes
–58 to 572°F / –50 to 300°C
0.1°
±0.4*
3½
n/na/y
3x7
no
yes
4149
8
Yes
–58 to 536°F / –50 to 280°C
0.1°
±1.0
8
n/na/y
1½ x 9¼
no
no
4349
8
Yes
–58 to 536°F / –50 to 280°C
0.1°
±0.4*
8
n/na/y
1½ x 9¼
no
no
4420
8
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.5
3½
n/na/y
1 x 7¼
no
yes
4421
8
Yes
–58 to 572°F / –50 to 300°C
0.1°
±0.4*
3½
n/na/y
1 x 7¼
no
yes
4371
9
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0
8
y/na/y
1 x 10¼
no
no
4378
9
Yes
–58 to 572°F / –50 to 300°C
0.1°
±0.4*
8
y/na/y
1 x 10¼
no
no
4044
9
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0
4¾
n/na/y
1½ x 4¾
no
no
4344
9
Yes
–58 to 572°F / –50 to 300°C
0.1°
±0.4*
4¾
n/na/y
1½ x 4¾
no
no
4351
10
Yes
–58 to 302°F / –50 to 150°C
0.1°
±1.0
¾
n/na/y
¾ x 3¾
no
no
4049
10
Yes
–58 to 302°F / –50 to 150°C
0.1°
±1.0
5¼
n/na/y
21/8 x 6½
no
no
4374
10
Yes
–58 to 302°F / –50 to 150°C
0.1°
±0.3*
5¼
n/na/y
21/8 x 6½
no
no
4355
10
Yes
–58 to 302°F / –50 to 150°C
0.1°
±1.0
5¼
n/na/y
2 /8 x 6½
no
no
4370
11
Yes
–58 to 536°F / –50 to 280°C
0.1°
±1.0
8
y/na/y
3¼ x 1
no
no
4369
11
Yes
–58 to 536°F / –50 to 280°C
0.1°
±0.4*
8
y/na/y
3¼ x 1
no
no
4364
14
Yes
–67 to 626°F / –55 to 330°C
0.2°
±0.5
6
n/na/y
6½ x 1½
no
yes
4372
14
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0
4½
n/na/y
6 x 1½
no
yes
4272
14
Yes
–58 to 572°F / –50 to 300°C
0.1°
±0.3*
4½
n/na/y
6 x 1½
no
yes
Cat. No.
1
*Ultra™ thermometers are tested at selected test points to be within tighter than normal tolerances to assist in providing improved accuracy.
Other points will not necessarily fall within the same accuracy as those found at the selected test points.
Traceable® Memory/Waterproof Thermometer
Versatile panel-mount module snaps into place or is stand-alone unit. Comes complete with stainlesssteel probe featuring an extended 10 foot cable and easy-to-grab handle.
Easy-view, four-digit LCD is ¾-inch-high
Records minimum and maximum memory readings over any time period. Temperature range
encompasses virtually all testing requirements: –58 to 572°F and –50 to 300°C. Resolution is
0.1° from –20 to 200°; 1° outside this range. Accuracy is ±1°C between –20 and 100°C. Reading
updates every second.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Dimensions: 4¾-inch-height; 3¼-inch width;
1-inch depth. Probe diameter 0.19 inch; probe length (including handle) 7½ inches; cable length 10 feet.
Supplied: Traceable® Certificate, probe, cable, and battery.
Description
Cat. No.
Traceable Memory/Waterproof Thermometer
4373
®
12
Traceable® Kangaroo™ Thermometer
Traceable Kangaroo™ Thermometer carries the 42-inch probe-cable in a reelcompartment pouch in the back of the unit. Perfect carry-around unit fits in any pocket,
or use the convenient flip-open stand.
Intuitive, never-read-the-instructions operation allows every user to record identical
results. Range is –58.0 to 572°F and –50.0 to 300°C with a resolution of 0.1° (between
–19.9 to 199.9) otherwise 1° and an accuracy of ±1°C (between –30 and 250°C)
otherwise ±2°C. Unit automatically captures and recalls minimum and maximum
temperature readings over any time period. High and low alarm may be programmed
in 1° increments. Alarm sounds every minute until temperature returns to non-alarm
condition. HOLD key freezes the display to record a current reading.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and Technology).
Stainless-steel probe has a diameter of 0.14 inches x 7½ inch length. Supplied silveroxide battery runs continuously for 1 year. Large ¾-inch digits are readable from 20
feet. Compact size: 2½ x 4¾ x ½ inches. Weight: 2¾ ounces.
Description
Cat. No.
Traceable Kangaroo Thermometer
®
4430
™
Traceable® Digital Thermometer
Ideal for all solutions
This is the thermometer to use in foods, soils, cuvettes, water baths, wastewater, and incubators.
Resolution is 0.1° and accuracy is ±1°C. Thermometer monitors temperature around the clock. Single
battery runs continuously for 1 year. One-half-inch high display is readable from 10 feet. Thermometer
automatically monitors solutions. Both a high and low alarm may be programmed in 1° increments.
When temperature rises above or falls below set points, a 1-minute audible alarm signals an outof-range condition. Alarm automatically resets when temperature returns to in-range reading. Alarm
mode may be switched off when not required. Timer counts down from 99 hours, 59 minutes and may
be set in 1-minute increments. When zero is reached, a 1-minute alarm sounds, and display flashes
until a key is pressed. At the touch of a key, display temperatures from –58.0 to 500.8°F and –50.0 to
260.0°C, switch from °F to °C, or set high/low alarms.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our
ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology). Probe clips to unit for handy storage.
Stainless-steel probe has a diameter of 0.14 inch, a length of 7¼ inches, and a 3-foot cable. Size: 2 x
4 x ½ inches. Weight: 3 ounces. Supplied: flip-open stand, probe, battery, and Traceable® Certificate.
Description
Cat. No.
Traceable® Digital Thermometer
4045
13
Traceable® Flip-Stick™ Thermometer
New flip-to-open design is easy to use. Stainless-steel probe may be
positioned at any angle. Fold-up, protected probe permits carrying on the
wrist strap or in a pocket. Big-digit, ¾-inch-high display may be viewed at a
glance. Shockproof in drop tests up to 5 feet.
Reading is updated every second
Features include °F/°C switch, minimum and maximum memory readings
over any time period, and a HOLD key freezes the display to capture
temperature. Wide range covers 99 percent of routine temperature
measurements: –58 to 572°F and –50 to 300°C. Resolution is 0.1° from –20
to 200° (1° outside this range). Accuracy is ±1°C between –20 and 100°C.
Ultra™ model accuracy is ±0.3°C at tested points.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
of Standards and Technology). Dimensions are a 0.14 inch stem diameter, 4½-inch stem length, an extended
length of 11 inches, 6-inch folded length, width of 5/8-inch and 1½-inch-height. Weight: 23/8 ounces.
Description
Accuracy
Cat. No.
Traceable® Flip-Stick™ Thermometer
±1°C
4372
Traceable® Ultra™ Flip-Stick™ Thermometer
±0.3°C at tested points
4272
Traceable® Waterproof Food
HACCP Thermometer
Infrared
non-contact
Traceable® Waterproof Food HACCP Thermometer’s easy-to-use membrane keys and rugsensor
ged ABS body make it ideal for food labs, food processing, food preparation, and brewing.
Waterproof construction allows for use in labs, plants, and all food areas.
For versatility, unit combines non-contact, non-invasive, no-touch, infrared thermometer
and piercing stainless-steel probe thermometer. Designed specifically as a HACCP (Hazard
Analysis and Critical Control Point) thermometer, it’s a state of the art approach to food
safety. LEDs indicate the HACCP zones: green light under 4°C (40°F), green light over
60°C (140°F), and red danger light between 4 to 60°C (40 to140°F).
Temperature range for infrared is –67 to 482°F (–55 to 250°C), and probe range is –67 to
626°F (–55 to 330°C). Resolution is 0.2°C (0.5°F) between –10 and 200; otherwise 1°.
Accuracy between –5 to 65°C for infrared is ±0.6°C and for probe is ±0.5°C. Readings
are updated every second. The display shows current temperature, minimum or maximum
temperature, low battery, and emissivity value. Infrared emissivity default is 0.95. It is
adjustable from 0.1 to 1.0. Field of view ratio is 2.5:1 (at a distance of 5 inches the reading
spot size is 2 inches).
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Bright LCD
digits are ¼-inch-high. Six-inch stainless-steel probe folds out of 6½ x 1 x 1½ inches. Unit
extends to an overall length of 12½ inches. Weight: 3½ ounces.
14
Description
D
Cat. No.
T
Traceable® Waterproof Food HACCP Thermometer
4364
Traceable® Full-Scale Thermometer
Readings are updated every second and displayed on a 3/8-inch LCD.
Magnetic back allows for placement on a metal surface (incubators,
freezers, water baths). Unit also incorporates flip-open stand for use
on lab bench and spring fastener for clipping to any edge. Stainlesssteel probe with piercing tip allows constant exposure to extreme
temperatures at the ends of the range.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and Technology).
Full-Scale Thermometer model resolution is 0.1° from –20 to 200° and 1° elsewhere.
Plus model
Resolution is 0.1° from –20 to 200° and 1° elsewhere. Plus model also includes the following features: high/low alarm, minimum/maximum
memories, and hold. Dimensions: Thermometer diameter 2.1 inches and 9/16-inch depth; probe length 5¾-inch and 0.14 inch diameter; 10 foot
cable length. Supplied: Traceable® Certificate and battery.
Description
Range
Accuracy
Cat. No.
Traceable® Full-Scale Thermometer
–58 to 500°F (–50 to 250°C)
±1.0°C between –20 to 100°C
4152
Traceable® Ultra™ Full-Scale Thermometer
–58 to 500°F (–50 to 250°C)
±0.5°C at tested points
4252
Traceable Full-Scale Plus Thermometer
–58 to 572°F (–50 to 300°C)
±1.0°C between –20 to 100°C
4377
Traceable Ultra Full-Scale Plus Thermometer
–58 to 572°F (–50 to 300°C)
±0.5°C at tested points
4368
®
®
™
Traceable® Alarm Thermometer/Alarm Timer
T
Un
Unique
thermometer/timer with alarms is perfect for monitoring liquids, air/gas, or
semisolids. Measure in °F or °C with a range of 32 to 392°F and 0 to 200°C. Resolution
sse
is 1° and accuracy is ±2°C. Triple display simultaneously shows time remaining to zero,
probe temperature, and temperature alarm setting. Large, 1½ x 2-inch LCD may be read
pro
from 9 feet away. Two distinctive alarms signal time and temperature.
ffro
Alarms for temperatures and time
A
T
Temperature
Te
alarm may be set in 1° increments. A five-minute alarm sounds continuously
wh
w
when temperature rises above set point. Alarm continues for 5 seconds every minute
un
until switched off or temperature falls below set point. Timer counts down from 24 hours
aan
and may be set in 1-minute increments. When zero is reached, a 1-minute alarm sounds,
Tim
T
Time’s Up flashes, and timer begins counting up. For repetitive times, a memory recalls
pre
previous setting. Intuitive controls are front-mounted. Viewing angle is adjustable. Foldba
back display panel and magnets on back permit vertical mounting.
Metal cable for ovens
M
De
Detachable,
curved stainless-steel probe has a ¼-inch diameter and 8½-inch length.
Metal cable (42 inches) may be placed in an oven or incubator. To assure accuracy
Me
an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST. High-impact, chemical-resistant ABS plastic base: 2¾ x 3 x ½ inches, LCD: 2¾ x 2½
x ½ inches. Weight: 4¼ ounces.
Description
Cat. No.
Traceable Alarm Thermometer/Alarm Timer
4147
®
15
Traceable® Waterproof Thermometer
Here’s the perfect thermometer for wet areas. Case is waterproof and shockproof. Use for monitoring of liquids, air/gas, or semisolids in freezers, water
baths, incubators, and refrigerators. Stainless-steel probe is resistant to most
laboratory chemicals.
Wide temperature range
Wide range covers 99 percent of the lab’s routine temperature measurements:
Range is –58 to 572 °F and –50 to 300°C with a resolution of 0.1° from –19.9 to
199.9° (otherwise 1°). Accuracy is ±1°C between –20 and 100°C. Ultra™ model
accuracy is ±0.5°C at tested points. Easy-view ¼-inch-high LCD digits.
Records minimum/maximum readings
At the touch of a key, memory recalls highest and lowest temperature readings
over any time period. Reading updates every second. Solid-state construction
eliminates dangers inherent in breakable glass and toxic mercury thermometers.
Thermometer operates in rugged conditions and outdoors. Waterproof construction is ideal for wet labs, wash-down areas, and virtually all field applications.
Unit is engineered to be shockproof in drop tests up to 5 feet. Stainless-steel,
4¾-inch long, 0.14-inch diameter probe, 10-foot cable, and digital-display case
are all waterproof. To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory accredited by
A2LA. It indicates traceability to standards provided by NIST. Supplied: suction
cups, magnets, Velcro®, Traceable® Certificate, 1.5 volt silver-oxide battery. Size:
1¾ inch dia. x ½-inch depth. Weight: 2 ounces.
Description
Accuracy
Traceable Waterproof Thermometer with probe/cable
±1°C
4039
Traceable® Ultra™ Waterproof Thermometer with probe/cable
±0.4°C at tested points
4339
®
Cat. No.
Traceable® Snap-in Module with Probe
Versatile panel-mount module snaps into place or is stand-alone unit. Comes complete
with stainless-steel probe featuring an extended 10-foot cable and easy-to-grab handle.
Easy-view, four-digit LCD is ¾-inch-high
Records minimum and maximum memory readings over any time period. Temperature
range encompasses virtually all testing requirements: –58 to 572°F and –50 to 300°C.
Resolution is 0.1° from –20 to 200°; 1° outside this range. Accuracy is ±1°C between
–20 and 100°C. Reading updates every second.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from
m our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Dimensions: 1½-inch-height; 27/16-inch width; ½-inch-depth. Probe diameter 0.14 inch; probe length (including handle) 2¾
inches; cable length 10 feet. Supplied: Traceable® Certificate, probe, cable, and battery.
16
Description
Cat. No.
Traceable® Snap-in Module with Probe
4376
Traceable® Memory Monitoring Thermometer
Perfect thermometer for monitoring liquids, air/gas, or semi-solids in tanks, freezers, water baths,
incubators, and refrigerators
Minimum and maximum memory
Triple display simultaneously shows high, low, and current temperatures. Minimum and maximum memory
feature permits monitoring conditions overnight, on weekends, or any time period. Range: –58.0 to 158.0°F
and –50.0 to 70.0°C. Resolution: 1°. Accuracy: ±1°C.
Alarm may be set in 1° increments. Alarm sounds when temperature rises above or falls below set points.
Alarm continues to sound for up to 12 hours, even if temperature returns to non-alarm range. To assure
accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Unit is supplied with a flip-open stand, wall mounting slot, and Velcro ®. Easy-view, ½-inch high digits may be read
from 10-feet. Wire-mounting bracket permits easy probe placement. Sensor and 10-foot cable perform accurately even when both are under
water. Sensor measures 5/16 inch in diameter and ¾-inch long. Supplied with an alkaline battery for continuous 1-year always-on monitoring,
probe, and Traceable® Certificate. Case is high-impact, chemical-resistant ABS plastic. Unit measures 2¾ x 4¼ x ¾ inches. Weight: 4 ounces.
Description
Cat. No.
Traceable® Memory Monitoring Thermometer
4048
Refrigerator/Freezer & Cable Probe Thermometer Specifications Chart
Cat. No.
Page
No.
Traceable®
Certificate Supplied
Range
Accuracy
(°C)
Length (inches)
Resolution
Probe
Cable
Waterproof Total
Unit/Cable/Probe
Unit Size (inch)
Alarm
Display
Min/Max
yes
4000
3
Yes
–58 to 302°F / –50 to 150°C
0.001°
±0.05
9
60
n/n/y
3½ x 5½ x 1¼
no
4146
11
Yes
–58 to 302°F / –50 to 150°C
0.1°
±1.0
7
18
n/n/y
3x2x½
no
no
4373
12
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0
7½
120
y/y/y
4¾ x 3¼ x 1
yes
yes
4430
13
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0
7½
36
n/n/y
2½ x 4¾ x ½
yes
yes
4045
13
Yes
–58 to 500°F / –50 to 260°C
0.1°
±1.0
7¾
36
n/n/y
2x4x½
yes
yes
4152
15
Yes
–58 to 500°F / –50 to 250°C
0.1°
±1.0 / ±0.5
5½
120
n/n/y
21/8 x 9/16
no
no
4377
15
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0 / ±0.5
5½
120
n/n/y
21/8 x 9/16
yes
yes
4147
15
Yes
32 to 392°F / 0 to 200°C
1°
±2.0
8½
42
n/n/y
2¾ x 3 x ½
yes
no
4039
16
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0
4½
120
y/y/y
1¾ x ½
no
yes
4339
16
Yes
–58 to 572°F / –50 to 300°C
0.1°
±0.4
4½
120
y/y/y
1¾ x ½
no
yes
4376
16
Yes
–58 to 572°F / –50 to 300°C
0.1°
±1.0
2¾
120
n/n/y
1½ x 27/16 x ½
no
yes
4048
17
Yes
–58 to 158°F / –50 to 70°C
1°
±1
¾
120
n/y/y
2¾ x 4¼ x ¾
yes
yes
4426
18
Yes
–22 to 185°F / –30 to 85°C
0.1°
±1.0
2½
na
y/na/y
2¼ x 2¼ x 11/8
no
yes
4239
19
Yes
–58 to 158°F / –50 to 70°C
0.01°
±0.3
2½
120 (2)
n/y/y
2¾ x 4¼ x ¾
yes
yes
6400
20
Yes
–22 to 158°F / –30 to 70°C
0.1°
±0.6
2½
79
n/n/y
4¼ x 3½ x 1¼
yes
yes
6401
20
Yes
–22 to 158°F / –30 to 70°C
0.1°
±0.6
1
79
n/n/y
4¼ x 3½ x 1¼
yes
yes
6408
21
Yes
–58 to 158°F / –50 to 70°C
0.01°
±0.1
2.5
120
n/y/y
2¾ x 4¼ x ¾
yes
yes
6424
21
Yes
–22 to 158°F / –30 to 70°C
0.01°
±0.1
2.5
n/a
n/na/y
4¼ x 4½ x ¾
yes
yes
4127
22
Yes
–58 to 158°F / –50 to 70°C
1°
±1
2½
120
n/y/y
2¾ x 4¼ x ¾
yes
yes
4548
22
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1
2½
120
n/y/y
37/8 x 43/8 x 7/8
yes
yes
4148
22
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1
¾
120
n/y/y
37/8 x 43/8 x 7/8
yes
yes
4105
23
Yes
–40 to 176°F / –40 to 80°C
0.5°
±1.5
1½
72
n/y/y
39/16 x 39/16 x 15/16
no
yes
4121
23
Yes
–58 to 158°F / –50 to 70°C
1°
±1
¾
120
n/y/y
25/8 x 2½ x ¾
no
yes
4306
24
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1
2½
36 (2)
n/y/y
3½ x 1¾ x 1
yes
yes
4227
24
Yes
–58 to 158°F / –50 to 70°C
0.1°
±0.5
2½
120
n/y/y
3¼ x 2¾ x 5/8
yes
yes
4115
25
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1.5
¾
120
n/y/y
4¼ x 4½ x 5/8
yes
yes
4126
25
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1.0
¾
120
n/y/y
4 x 4¼ x ¾
no
yes
4122
26
Yes
32.0 to 122°F / 0 to 50.0°C
0.1°
±1
¾
120
n/y/y
2¾ x 2¾ x ¾
no
no
4047
26
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1.0
¾
120
n/y/y
3¼ x 2¼ x 5/8
no
no
4142
27
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1.0
/8
5
/8
8
120
n/y/y
3x3x½
yes
no
4140
27
Yes
–58 to 158°F / –50 to 70°C
0.1°
±1.0
4110
41
Yes
–58 to 500°F / –50 to 260°C
0.1°
±1.0
5
120
n/y/y
4 x 4 x 5/8
yes
no
48
n/n/y
2½ x 6½ x 1
yes
yes
17
Traceable® Digital-Bottle™
Refrigerator/Freezer Thermometer
Provides accurate readings anywhere
Accurately monitor temperatures in freezers, refrigerators, incubators, and environmental
chambers with this temperature-buffered sensor. Bottle and solution insulate sensor from rapid
changes, as an example, when a refrigerator door is opened. Solution mimics exact temperature
of samples. Stainless-steel sensor/probe assures long product life. Entire unit is waterproof.
Records high/low readings
Easy-to-read digital display shows high, low, and current temperatures. Min/Max monitors high/
low readings overnight, on weekends, or for any time period—a significant advantage over glass
thermometers displaying only the current temperature. The entire unit including bottle and display
may be placed in any environment within the operating temperature range of –22 to 185°F (–30
to 85.0°C). The resolution is 0.1°. Accuracy is ±1.0°C between –20.0 to 85°C. Ultra™ model
accuracy is ±0.4°C at tested points.
Supplied with unique holder
Chemical-resistant ABS plastic holder stands on a shelf or holder
affixes to any wall. Bottle may be removed from holder.
Digital-Bottle™ eliminates mercury contamination
Solid-state probe eliminates mercury thermometer contamination.
Probe is sealed in a miniature bottle filled with nontoxic glycol.
Solution is GRAS (generally recognized as safe) by the US FDA. It
eliminates concerns about incidental contact with food or drinking
water. (Also available with glass bead fill.)
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology).
Supplied: holder, Velcro®, replaceable battery. Unit size: 17/8 x 1 x
4 5/8 inches, holder is 2¼ x 2¼ x 11/8 inches. Weight: 32/3 ounces.
Description
Accuracy
Cat. No.
Traceable Digital-Bottle Refrigerator/Freezer Thermometer
(patents pending)
±1.0°C
4426
Traceable Digital-Bottle Ultra Refrigerator/Freezer Thermometer
(patents pending)
±0.4°C at
tested points
4427
Traceable® Digital-Bottle™ Refrigerator/Freezer Thermometer
(Supplied with bottle probe filled with glass beads instead of solution) (patents pending)
±1.0°C
4428
Traceable® Digital-Bottle™ Ultra™ Refrigerator/Freezer Thermometer
(Supplied with bottle probe filled with glass beads instead of solution) (patents pending)
±0.4°C at
tested points
4429
®
®
18
™
™
™
Mount anywhere
with supplied Velcro®
Traceable® Hi-Accuracy
0.01° Refrigerator Thermometer
New high-accuracy dual thermometer, reads to 0.01 degrees while
w
monitoring temperatures in refrigerator and freezer simultaneously
o
ously
or two
refrigerator locations. Temperature-buffered bottle sensor insulates
u
ulates
and
eliminates rapid changes when refrigerator door is opened. May
May also be
used in water baths, heating blocks, and incubators.
Records time and date for Min/Max readings
and Hi/Lo alarm alerts
Triple display simultaneously shows minimum/
maximum and current temperatures. Monitors
readings overnight, on weekends, or for any time
period and displays the exact time and date when the
Min/Max temperature occurred for both bottle probes.
Two channel alarms provide unique visual (LEDs)
and audio alerts when temperature rises above or
falls below high and low set points. Unit displays
the exact time and date when dual thermometer
alarms are triggered. Alarms are programmable in
0.1° increments. Visual and audible alarms signal
continuously even if temperature returns to non-alarm
range. Ten-foot micro-cable permits refrigerator doors
to close on it.
Date and time of
maximum temperature
reading
Wide-range and high resolution
Range is –58 to 158°F and –50 to 70°C with a resolution of 0.01° and
accuracy of ±0.3°C. Probe is sealed in a miniature bottle (1 x 2½ inches)
filled with nontoxic glycol. Solution is GRAS (generally recognized as
safe) by the US FDA. Eliminates concerns about incidental contact with
food or drinking water.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). High-impact,
chemical-resistant ABS plastic case: 2¾ x 4¼ x ¾ inches. Weight:
5 ounces. Supplied: stand, Velcro®, magnetic strips, wall mount,
Traceable® Certificate, batteries.
Description
Probe
Cat. No.
Traceable® Hi-Accuracy 0.01° Refrigerator Thermometer (patented)
1 bottle probe
4238
Traceable® Hi-Accuracy 0.01° Refrigerator Thermometer (patented)
2 bottle probes
4239
Traceable® Hi-Accuracy 0.01° Probe Thermometer (see bottom picture)
2 probes (chemical-resistant, waterproof sensor
measures 3/16 -inch diameter and ¾-inch long)
4240
19
Traceable® Memory-Card
Refrigerator/Freezer Thermometer
Traceable® Memory-Card Refrigerator/Freezer Thermometer is a
stand-alone unit with data logging capabilities. It records readings from
once a minute up to once every 720 minutes on a removable standard
dard
SD memory card. Thermometer captures 5.9 million readings with the
supplied 256 mb removable SD memory card. Memory card reader
er
(supplied) plugs into any USB computer port for an instant report.
Text report includes date/time of day and sensor readings, it may be
sent to any spreadsheet or database. Capturing a continuous stream
am
of data shows the behavior of refrigerators, room areas, or tests.
The bottle probe model is ideal for monitoring refrigerators, freezers,
rs,
and incubators; the stainless steel probe model is ideal for QC andd
research. Bottle probe model meets all federal and state refrigerator
or
thermometer requirements. Both models include internal sensors to
measure ambient temperature and humidity—ideal for monitoring store
rooms, labs, and critical areas.
6400
Sealed bottle sensor is insulated from rapid temperature changes
when refrigerator door is opened. Solution in sealed bottle is GRAS—
S—
generally recognized as safe by FDA. Thin cable is easy for refrigerator
door to close and seal. Minimum/maximum feature displays highest/
lowest readings for any time period. Alarm sounds and flashes a bright
red LED when temperature rises above or falls below user-set trip
points, alarm sets in 0.1° increments. Unique 4-line display shows
temperature of probe, ambient temperature, humidity and time of day.
Operates using supplied batteries or supplied AC adaptor.
To assure accuracy an individually serial-numbered Traceable® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and
Technology). Probe temperature range: –22 to 158°F (–30 to 70°C) with 0.1°
resolution. Probe temperature accuracy: ±0.6°C (0 to 50°C), ±1.2 (–30 to 0°C, 50
to 70°C). Probes size: bottle 1 x 2½ inches, stainless-steel 0.16 x 1-inch. Cable
length: 79". Humidity range: 0 to 99.9%RH, resolution 0.1. Humidity accuracy:
±5%RH at 25°C for range of 20 to 85%RH, ±7%RH elsewhere. Size: 4¼ x 3½ x
1¼ inches. Weight: 7 ounces. Case: high-impact, chemical-resistant ABS plastic.
Supplied: probe, cable, 256 mb SD memory card, USB memory card reader,
magnetic mounting strips, Velcro®, wall mount, bench stand, batteries, adaptor,
Traceable® Certificate.
Thin cable makes it easy for
refrigerator door to close and seal
6401
20
Description
Probe
Cat. No.
Traceable® Memory-Card Refrigerator/Freezer Thermometer
Bottle
6400
Traceable® Memory-Card with Stainless-steel Probe (without bottle) Thermometer
Stainless-steel
6401
®
Trace
Traceable
Platinum High-Accuracy
Refrigerator
Refri
Thermometer
Displays minimum/maximum temperatures for previous 24 hours (for each hour) and
previous 7-days (for each day); or previous 30 days (for each day). Time/Date stamp key
ey
shows exact
ex time and date for all minimum and maximum readings. A 4-wire platinum
sensor in
insures linear response and high accuracy across entire range. Range: –58.00
to 158.00
158.00°F (–50.00 to 70.00°C). Resolution: 0.01°. Accuracy: ±0.1°C; fulfills precise
requirem
requirements for refrigerators/freezers. Sealed bottle probe version is insulated from
rapid tem
temperature changes when door is opened. Sealed bottle liquid is GRAS— liquid
generally recognized as safe by US FDA. Refrigerator/freezer door closes and seals
tightly around
ar
micro-thin cable. Triple display shows current and minimum/maximum
tempera
temperatures. Alarm is settable in 0.1° increments and signals when temperature rises
above/fa
above/falls below set points. Visual LEDs and audible alarm signals continuously, even if
tempera
temperature returns to non-alarm range.
6408
6409
Traceab
Traceable®: To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration
ca
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute
I tit t of Standards and Technology). Size: 2¾ x 4¼ x ¾-inch. Weight: 5 ounces. Case: high-impact, chemicalresistant ABS plastic. Supplied: platinum bottle probe, cable, magnetic strips, Velcro® tape, bench stand, batteries,
Traceable® Certificate.
Description
Probe
Traceable Platinum High-Accuracy Refrigerator Thermometer (patents pending)
Bottle
6408
Traceable® Platinum High-Accuracy Thermometer (patents pending)
5 16
/ ” diameter x ¾-inch long
6409
®
Cat. No.
Available June 2013
Traceable® Wireless
Radio-Signal Refrigerator
Thermometer
Unit wirelessly reads refrigerator temperatures from up to 100 feet away.
way.
Temperature readings from up to three remote refrigerator sensors are
sent to a main unit via radio signal (frequency of 433 MHz, penetrates
es
refrigerators and walls). Sealed GRAS bottle is insulated from rapid
temperature changes when refrigerator door is opened. Liquid in
sealed bottle is GRAS—generally recognized as safe by US FDA.
Data is updated every 30 seconds. Minimum/Maximum memory allows
ws
monitoring conditions over any time period. Distinctive alarm sounds when
temperature rises above/falls below settable high and low set points..
Alarms may be conveniently set in 1° increments. Indicator on main unit
shows rising/falling temperature trends.
6425
6424
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Range: –22.0 to 158.0°F (–30.0 to 70.0°C). Resolution: 0.1°. Accuracy: ±1.0°C. Main unit has an easy-read, 2-line LCD with jumbo 11/8inch high digits. Size: 4¼ x 4½ x ¾-inch (main unit), 21/3 x 3½ x ¾-inch (remote unit). Weight: 6 ounces (main unit), 3 ounces (remote unit).
Case: high-impact, chemical-resistant ABS plastic. Supplied: one main unit, one remote unit, flip-open stand, wall mount, Velcro®, batteries,
Traceable® Certificate.
Description
Cat. No.
Traceable® Wireless Radio-Signal Refrigerator Thermometer with Remote Refrigerator Bottle Probe Module
6424
Additional Traceable ® Remote Refrigerator Bottle Probe Module (total of 3 may be used) (patented)
6425
21
Traceable® Refrigerator/Freezer Thermometer
Accurately monitor temperatures in freezers, water baths, heating blocks, incubators, and
refrigerators with this enclosed temperature-buffered sensor. Bottle insulates sensor from
rapid temperature changes when refrigerator door is opened. Triple display simultaneously
shows high, low, and current temperatures. Min/max monitors high/low readings overnight,
on weekends, or for any time period—a significant advantage over current reading-only glass
thermometers. Range is –58 to 158°F and –50 to 70°C with a resolution of 1° and accuracy
of ±1°C.
Signals out-of-range conditions
Alarm feature provides alert when temperature rises above or falls below a set point. Alarm is
programmable in 1° increments. Visual and audible signals continue even if temperature returns
to non-alarm range. Ten-foot micro-cable permits refrigerator doors to close on it. Solid-state
probe eliminates mercury contamination in refrigerators. Probe is sealed in a miniature bottle (1
x 2½ inches) filled with nontoxic glycol. Solution is GRAS (generally recognized as safe) by the
US FDA. Eliminates concerns about contact with food or drinking water.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
ute
t off Standards
St d d
and Technology). High-impact, chemical-resistant ABS plastic case is 2¾ x 4¼ x ¾ inches. Weight: 4 ounces. Supplied:
Traceable® Certificate, flip-open stand, wall mounting, Velcro®, magnetic strips.
Description
Probe
Cat. No.
Traceable Refrigerator/Freezer Thermometer (patented)
Bottle designed for refrigerator/freezer applications
4127
Traceable® 5ml Vaccine Thermometer (patented) (smaller bottle pictured)
Bottle mimics vaccine temperature and fits in tray.
4527
®
Traceable® Jumbo Display
Refrigerator/Freezer Thermometer
Perfect jumbo digit thermometer for monitoring freezers, water baths, heating blocks, incubators,
and refrigerators. Accurately monitors temperatures with its enclosed temperature-buffered sensor.
Bottle insulates sensor from rapid temperature changes when refrigerator door is opened. Tripledisplay simultaneously shows maximum, minimum, and current probe temperatures plus room
temperature. Min/max monitors high/low readings overnight, on weekends, or for any time period.
Range is –58 to 158°F and –50 to 70°C with a resolution of 0.1° and accuracy of ±1°C.
Signals out-of-range conditions
Alarm feature provides alert when temperature rises above or falls below a set point. Alarm is
pr
programmable in 1° increments. Ten-foot micro-cable permits refrigerator doors to close on it.
S
Solid-state probe eliminates mercury contamination. Probe is sealed in a miniature bottle (1 x 1½
in
inch) filled with patented nontoxic glycol. Solution is GRAS (generally recognized as safe) by the
US FDA. Eliminates contact with food or drinking water.
U
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
N
NIST (National Institute of Standards and Technology).
Supplied: Traceable® Certificate, flip-open stand, wall mount, Velcro®, magnet, alkaline battery.
Easy-view, jumbo 1½ inch-high digits may be read from 30 feet. Sensor and 10-foot cable perform
accurately even when under water. High-impact, chemical-resistant ABS plastic case: 37/8 x 43/8 x 7/8
inches. Weight: 4 ounces.
Description
Probe
Cat. No.
Traceable Jumbo Refrigerator/Freezer Thermometer (patented)
Bottle specifically for refrigerator/freezer applications
4548
Traceable® 5ml Vaccine Jumbo Thermometer (smaller bottle)
5ml vaccine bottle. Bottle mimics vaccine temperature and fits in tray.
4648
Traceable Jumbo Memory Monitoring Thermometer (insert)
Probe is / -inch diameter and ¾-inch long
4148
®
®
22
3 16
Traceable® Sentry™ Thermometer
Simultaneously displays high/low and current temperature
A triple display constantly shows high, low, and current temperatures. Instantly view if freezer,
water bath, or incubator is within temperature spec. Monitor temperature of any experiment when
you’re not there—overnight, weekends, even during lunch. Range is –58 to 158°F or –50 to 70°C.
Resolution is 1° and accuracy is ±1°C.
Sensor and 10-foot cable may be placed under water, in refrigerator, or freezer. Small cable
diameter (1/16-inch) allows refrigerator doors to close on it. Unplugging the cable activates a sensorr
inside the unit for monitoring ambient temperature.
One-key operation
Simple, one-key operation resets the minimum/maximum memories. Probe’s wire-mounting bracket
et
permits easy sensor placement. To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and Technology). Unit’s highhigghimpact ABS plastic case has a flip-open stand, wall mount, magnet, Velcro®. Size: 25/8 x 2½ x ¾ inches.
ches.
Weight: 17/8 ounces.
Description
Probe
Cat. No.
Traceable Probe Sentry Thermometer °F
3 16
/ -inch dia. x ¾-inch
4120
Traceable® Probe Sentry™ Thermometer °C
3 16
/ -inch dia. x ¾-inch
4121
Bottle
4322
Bottle
4321
5 ml vaccine bottle
4522
5 ml vaccine bottle
4521
®
™
Traceable Sentry Thermometer °F with Bottle
®
™
Bottle probe specifically for refrigerator/freezer applications (patented)
Traceable® Sentry™ Thermometer °C with Bottle
Bottle probe specifically for refrigerator/freezer applications (patented)
Traceable® Sentry™ 5ml Vaccine Thermometer °F with Bottle
Bottle mimics vaccine temperature and fits in tray. (smaller bottle pictured)
Traceable® Sentry™ 5ml Vaccine Thermometer °C with Bottle
Bottle mimics vaccine temperature and fits in tray. (smaller bottle pictured)
Traceable® Thermometer with
Time/Date and Max/Min Memory
Thermometer displays current, minimum, and maximum temperatures. It captures and
shows the exact time and date when the minimum and maximum temperature occurred.
Ideal for monitoring solutions and refrigerators. Range is –40.0 to 176.0°F and –40.0 to
80.0°C with a resolution of 0.5° and accuracy of ±1.5°C. Display’s 3/8-inch-high digits
show Min/Max of ambient or probe temperature, time of day, and month/day.
Submersible probe
Wire mounting bracket permits easy probe placement. Sensor and 6 ft cable perform
accurately even when both are under water. Sensor: 3/16-inch dia. x 1½ inch length.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Supplied:
flip-open stand, wall mounting slot, Velcro®, Traceable® Certificate, battery. High-impact
ABS plastic case: 39/16 x 39/16 x 15/16 inches. Weight: 3½ ounces.
Description
Probe
Cat. No.
Traceable Probe Thermometer with Time/Date & Max/Min
3 16
/ -inch diameter and ¾-inch long
4105
Traceable® Thermometer with Time/Date Max/Min Memory with bottle
Bottle specifically for refrigerator/freezer applications (patented)
4305
Traceable® 5ml Vaccine Thermometer with Time/Date & Max/Min Memory
5ml vaccine bottle. Bottle mimics vaccine temperature and fits in tray.
4605
®
23
Traceable® Dual Thermometer
Traceable® Dual thermometer displays the temperatures of two separatee
probes in °C and °F. Allows putting one probe in the freezer and anotherr
in the refrigerator (or measure two areas of a refrigerator). Range is –588
to 158°F and –50 to 70°C with a resolution of 0.1° and an accuracy of
±1°C. Displays date and time when minimum and maximum temperatures
es
occur. Audible and visual alarm feature provides alert when temperaturee
rises above or falls below two set points. Alarm is programmable in 1°
increments. Three and a half-foot micro-cable permits refrigerator doorss
to close on it. Probe is sealed in a miniature bottle (1 x 2½ inches) filled
with nontoxic glycol. Solution is GRAS (generally recognized as safe) byy
the US FDA. Eliminates concerns about incidental contact with food or
drinking water.
To assure accuracy an individually serial-numbered Traceable® Certificate
te
is provided from an ISO 17025 calibration laboratory accredited by A2LA.
A.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). High-impact, chemical-resistant ABS plastic case is 3½ x 1¾ x 1 inches. Weight: 32/3 ounces.
Supplied with flip-open stand, Velcro®, and magnetic strips are provided for mounting of both thermometer and bottle sensor.
Supplied with a Traceable® Certificate and battery for continuous, 1-year always-on monitoring.
Description
Probe
Cat. No.
Traceable Dual Thermometer (patented)
Supplied with 2 bottle probes for refrigerator/freezer applications
4306
Traceable® Dual Thermometer (lower picture)
Supplied with two ¼-inch-diameter x 1¼ inch length, waterproof probes
4307
®
Traceable® Refrigerator/Freezer Plus™ Thermometer
Accurately monitor temperatures in freezers, water baths, heating blocks,
incubators, and refrigerators with this enclosed temperature-buffered sensor.
Bottle insulates sensor from rapid temperature changes when refrigerator door
is opened. Triple display simultaneously shows minimum, maximum, and currentt
temperatures. Min/Max monitors high/low readings overnight, on weekends, or
for any time period—a significant advantage over current reading-only glass
thermometers. Range is –58 to 158°F and –50 to 70°C with a resolution of 0.1°
and accuracy of ±0.5°C. Alarm feature provides alert when temperature rises
above or falls below a set point. Alarm is programmable in 1° increments. Ten-foot
ot
micro-cable permits refrigerator doors to close on it.
Avoids contaminants
Solid-state probe eliminates mercury contamination in refrigerators. Probe is sealed
aled
in a miniature bottle (1 x 2½ inches) filled with nontoxic glycol. Solution is GRAS
(generally recognized as safe) by the US FDA. Eliminates concerns about contact
ct with
th
food or drinking water. To assure accuracy an individually serial-numbered Traceable
eable®
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA.
2LA.
It indicates traceability to standards provided by NIST. High-impact, chemical-resistant
sistant
ABS plastic case: 3¼ x 2½ x 5/8 inches. Weight: 4 ounces. Supplied: Velcro®, magnetic
gnetic
strips, Traceable® Certificate, battery.
Description
Probe
Cat. No.
Traceable Refrigerator/Freezer Thermometer (patented)
Bottle specifically for refrigerator/freezer applications
4227
Traceable® 5ml Vaccine Plus™ Thermometer
5ml vaccine bottle. Bottle mimics vaccine temperature and fits in tray.
4627
Traceable Memory Monitoring Plus Thermometer
3 16
/ -inch diameter and ¾-inch long
4727
®
®
24
™
Traceable® Radio-Signal
Remote Thermometer
Reads temperatures 100 feet away
Module transmits on a radio frequency of 433 MHz, penetrating walls, with a
range of 100 feet. Data is transmitted every 30 seconds. Main unit can receive
and display data from 3 different remote modules. Modules may be set to channel
1, 2, or 3. Display’s trend indicator shows whether temperature is rising or falling.
Minimum and maximum memory display allows monitoring of conditions over short
or long periods, including hours or months. Alarms may be set in 1° increments.
Alarms sound when the temperature rises above or falls below the two set points.
Jumbo digits (11/8 inches high) may be read from 25 feet. Cases are high-impact,
chemical-resistant ABS plastic.
Reads up to three modules
Total of three modules may be used with the main receiver. The splashproof remote module is supplied
with an internal and external sensor. External sensor (3/16-inch dia. x ¾-inch long) and 10-foot cable
perform accurately even when both are under water. Switchable °F/°C range: –58.0 to 158.0°F (–50
to 70.0°C) probe, and –14.2 to 158.0°F (–9.9 to 70.0°C) ambient. Resolution is 0.1° and accuracy is
±1°C. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our
ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Supplied: one main unit 4¼ x 4½ x 5/8 inches, Weight: 6
ounces, one remote module 21/3 x 3½ x ¾ inches, Weight: 3 ounces; internal probe and external probe/cable.
Also supplied with a Traceable® Certificate, flip-open stand, wall bracket, Velcro®, batteries.
Description
Probes
Cat. No.
Traceable® Radio-Signal Remote Thermometer with Remote Module with probe
n/a
4115
Additional Traceable ® Remote Module (total of 3 modules may be used)
3 16
/ -inch diameter and ¾-inch long
4116
Traceable Stainless-Steel Probe
Stainless-steel 1/8-inch dia. x 8½ inch, 5-foot cable
4117
Traceable® External Bottle Probe
Bottle specifically for refrigerator/freezer applications
4118
Traceable 5ml Vaccine Bottle Probe
Small 5ml round vaccine bottle
4618
®
®
Traceable® Big-Digit Memory Thermometer
Big-digit thermometer with dual min/max memory
Easy-view, 11/8-inch-high jumbo digits may be read from 25 feet. Dual display
permits reading ambient and probe temperatures simultaneously. Minimum/
maximum memory readings may be displayed or reset at the touch of a key.
External probe range is –58.0 to 158.0°F/ –50.0 to 70.0°C. Ambient sensor (inside
case) range is 23.0 to 122.0°F/–5.0 to 50.0°C. Resolution is 0.1° and accuracy
is ±1°C. This stable and accurate unit requires no adjustment or maintenance.
External (3/16-inch diameter by 4/5-inch length) probe is supplied with a 10-foot cable.
Both cable and sensor perform accurately when under water. Always-on instrument
reads temperatures constantly.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and
Technology). Supplied: flip-open stand, wall mounting, Velcro®, Traceable®
Certificate, and battery. Case is high-impact, chemical-resistant ABS plastic. Size: 4
x 4¼ x ¾ inches. Weight: 4 ounces.
Description
Accuracy
Cat. No.
Traceable Big-Digit Memory Thermometer
±1°C
4126
®
25
Traceable® Monitoring Thermometer
Always-on Monitoring Thermometer with probe and 10 foot submersible cable
Monitor temperatures of liquids, air/gas, and semisolids from across the room on a giant LCD. Perfect
thermometer for monitoring reagents or solutions in tanks, water baths, incubators, and refrigerators.
Reads from –58.0 to 158.0°F and –50.0 to 70.0°C with 0.1° resolution and ±1°C accuracy. Reads in
°F or °C with the flick of a switch. Unit displays ambient temperature and probe temperature at the
touch of a key. Microcomputer and solid-state construction rid lab of glass thermometer breakage and
mercury problems. Display updates every 10 seconds, thus eliminating 3-minute lag inherent in glass
and dial thermometers.
Place anywhere
Easy-view, ¾-inch-high display may be read from 10 feet. Velcro® tabs on back allow unit to be placed on ovens, water baths, desiccators,
or refrigerators. Ten-foot cable and sensor perform accurately even under water. To assure accuracy an individually serial-numbered
Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology). Sensor diameter is 3/16 inch and length is 4/5 inches. Size: 3¼ x 2¼ x 5/8
inches. Weight: 2½ ounces. Supplied: Traceable® Certificate, probe bracket, Velcro® tabs, flip-open stand, battery.
Description
Cat. No.
Traceable Monitoring Thermometer
4047
®
Traceable® Solar-Powered Thermometer
Thermometer is always-on and runs for years powered from light in lab or plant. Efficient and costsaving solar panels make unit environmentally attractive. Monitor ambient temperature or temperatures
of liquids, air/gas, and semisolids. Perfect thermometer for measuring temperatures of solutions in
tanks, water baths, incubators, and refrigerators. Sensor and cable perform accurately even when under
water. It’s ideal for food inspection, petroleum tests, quality control, biomedical studies, R/D analysis,
and wastewater tests. Reads in °F or °C at the flick of a switch. Display updates every 10 seconds.
Resolution is 0.1°. Accuracy is ±1°C.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied: slot for wall
mounting, Velcro®, solar panels, backup battery, external 3/16-inch-diameter by 4/5-inch sensor, and 10-foot cable. Unit: 2¾ x 2¾ x ¾ inches.
Weight: 2 ounces.
Description
Range
Cat. No.
Traceable® Solar-Powered Thermometer, External
–58.0 to 158°F / –50.0 to 70.0°C
4123
Traceable® Solar-Powered Thermometer, Internal
32.0 to 122°F / 0 to 50.0°C
4122
Traceable® Stick Thermometer
Minimum/maximum memory thermometer measures liquid, air/gas, or semisolids
to a resolution of 0.1°. Range is –58.0 to 158.0°F or –50 to 70°C with an
accuracy of ±1°C. At the touch of a key recall highest or lowest temperatures
achieved over any time period. Unit simultaneously displays probe and
ambient temperatures.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Stick Thermometer’s submersible sensor dimension: 0.2 inch dia. x ⅝-inch length and submersible cable length is 3 feet. One ounce weight
makes it perfect for carrying in the pocket, or it may be placed anywhere using the supplied self-adhesive Velcro® tabs. Furnished silver-oxide
battery powers unit continuously for a year. Chemical-resistant and shockproof ABS plastic case is 4¼ x 1 x ⅝ inches.
26
Description
Cat. No.
Traceable® Stick Thermometer °C
4144
Traceable® Stick Thermometer °F
4145
Traceable® Big-Digit 4-Alert Alarm Thermometer
Large, 11/8-inch-high digits can be viewed from across the lab. Unique Four-Alert
Thermometer provides user with precise monitoring of the slightest change in
temperature. Temperature range is –58.0 to 158.0°F or –50.0 to 70.0°C, resolution is
0.1°, and accuracy is ±1°C. Front panel controls are easy to set. Unit displays both
probe and ambient temperature.
Warns if too hot or cold
Alarm will activate at a temperature above a setting, below a setting, between two
settings, or outside two settings. Green/red lights blink and an alarm sounds when an
out-of-range condition is detected. Continuous alarm sounds every minute for 5 seconds
until the temperature returns to a non-alarm condition or until the alarm is turned off.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Supplied:
wall mount, stand, and suction cup. Sensor dimensions: 0.2-inch dia. x 2/3-inch length,
3½-foot cable. ABS plastic shock-resistant and chemical-resistant case: 4 x 4 x 5/8 inches.
Weight: 4¼ ounces.
Description
Cat. No.
Traceable® Big-Digit Four-Alert Alarm Thermometer °C
4142
Traceable® Big-Digit Four-Alert Alarm Thermometer °F
4143
Traceable® Four-Alarmer Thermometer
Thermometer has four unique alarm configurations: alarm triggers when temperature
is higher than set point, lower than set point, outside of high and low set points, or
inside of high and low set points. This allows precise monitoring of any appliance
(water bath, incubator, refrigerator) or experiment.
Green/red lights blink and alarm sounds when out-of-range condition is detected.
Continuous alarm sounds every minute for 5 seconds until the temperature returns to
non-alarm condition or until alarm is turned off. Temperature range is –58.0 to 158.0°F
or –50.0 to 70.0°C with a resolution of 0.1° and an accuracy of ±1°C. One-half-inchhigh digits are readable from 10 feet. Front panel controls make it easy to set.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and Technology).
High-impact, chemical-resistant ABS plastic case is 3 x 3 x ½ inches. Probe size:
0.2-inch dia. x 5/8-inch length, 3-foot cable. Weight: 2¼ ounces. Supplied: removable
suction cup, stand, self-adhesive wall mount, Traceable® Certificate, battery.
Description
Cat. No.
Traceable® Four-Alarmer Thermometer °C
4140
Traceable® Four-Alarmer Thermometer °F
4141
27
Traceable® Big-Digit Refrigerator Thermometer
Wide-Range Big-Digit Refrigerator Thermometer’s 7/8-inch high display is easy to view. Switchable range is
from –3.8 to 199.9°F and –19.9 to 110.0°C with a resolution of 0.1°. Accuracy is ±1ºC in the range 0 to 25°C
and ±1.5°C outside range. Ultra™ model accuracy is ±0.5°C at tested points. May be placed anywhere using
four methods: secure suction cup, Velcro®, stand, and hanger. Display updates every 30 seconds (this allows
capturing a reading while allowing a momentary open refrigerator door). Wide range of the thermometer also
makes it an ideal unit to monitor temperatures in storerooms, labs, offices, hoods, and outdoors.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Size: 3½ x 2 x ¾ inches. Weight: 11/8 ounces.
Description
Accuracy
Cat. No.
Traceable Big-Digit Refrigerator Thermometer
±1ºC
4210
Traceable® Big-Digit Ultra™ Refrigerator Thermometer
±0.5ºC at tested points
4211
®
Traceable® Big-Digit See-Thru™ Thermometer
Use the Traceable® Big-Digit See-Thru™ Thermometer outdoors, in storerooms, at fume hoods,
labs, clean rooms, refrigerators, and plant areas. May be attached to the outside of a window to
view outdoor temperatures. Transparent display with 1¼-inch-high digits show current and minimum/
maximum temperatures. Automatically clears and updates the Min/Max readings daily. Range is
–13.0 to 158.0°F or –25.0 to 70.0°C with a resolution of 0.1° and an accuracy of ±1°C.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Supplied: mounting tape, Velcro®, battery,
and Traceable® Certificate. Size: 3½ x 4¼ x ¾ inches. Weight: 8 ounces.
Description
Cat. No.
Traceable® Big-Digit See-Thru™ Thermometer °F
4159
Traceable® Big-Digit See-Thru™ Thermometer °C
4160
Econo Traceable® Refrigerator Thermometer
Inexpensive refrigerator thermometer switchable range is from 14.2 to 131.0°F and –9.9 to 55.0°C with a resolution
of 0.1°. Accuracy is ±1°C in the range of 5 to 25°C and ±1.5°C outside range. Ultra™ model accuracy is ±0.5°C at
tested points. Secure suction cup and Velcro® allow unit to be located anywhere. Display updates every 30 seconds.
This allows capturing a reading without any effect from an open refrigerator door. Wide range of the thermometer also
makes it an ideal unit to monitor temperatures in storerooms, labs, offices, hoods, and cabinets.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology). Easy-view, see-through-display LCD digit height is ½-inch. Supplied: long-life battery. Size: 1 x 2½ x
3
/8 inches. Weight: ½ ounce.
Description
Accuracy
28
Cat. No.
Econo Traceable Refrigerator Thermometer
±1ºC
4157
Econo Traceable® Ultra™ Refrigerator Thermometer
±0.5ºC at tested points
4158
®
Traceable® –100.0 Platinum Freezer Thermometer
RTD Platinum Freezer Thermometer accurately monitors temperatures in freezers, water baths, heating blocks,
incubators, and refrigerators. Range is –99.9 to 199.9°C with a resolution of 0.1° and an accuracy of ±2°C.
Ten-foot, ultra-thin micro-cable permits freezer doors to close on it without affecting the seal. Fast-response
–100.0-ohm platinum triple purpose probe for use with liquids, air/gas, and frozen material.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology).
Shown on the certificate are calibration test points of –80°C, 0°C, and 100°C. Supplied: adjustable probe
holder, Velcro®, magnetic strips, probe, Traceable® Certificate, carrying case, battery. RTD Platinum probe
length 3 inches, diameter 0.16 inch; overall length 5 inches, 10-foot cable. High-impact, chemical-resistant ABS
case: 2¾ x 4¼ x ¾ inches. Weight: 4¼ ounces.
Description
Accuracy
Cat. No.
Traceable® –100.0 Platinum Freezer Thermometer
±2°C
4230
Thermometer with Type-K Probe Specifications Chart
Waterproof:
Total Unit/
Cable/Probe
Page
No.
Traceable®
Certificate
Supplied
4230
29
Yes
–99 to 199.9°C
0.1°
±2°C
5
120
n/n/y
2¾ x 4¼ x ¾
no
no
4015
30
Yes
–328 to 2498°F / –200 to 1370°C
0.1° / 1°
±1.0
0.12
48
n/y/y
3¼ x 7 x 1½
yes
yes
4025/4026
30
Yes
–40 to 2000°F or –40 to 1200°C
1°
±(1 + 1%)
0.12
48
n/y/y
3x5x1
no
no
4232/4233
29
Yes
–58 to 1382°F or –50 to 750°C
1°
±(1 + 0.75%)
0.12
48
n/n/y
2¾ x 4¼ x 7/8
no
no
4135
31
Yes
–58 to 1999°F / –50 to 1300°C
1°
±0.3% + 1°C
0.12
120 (2)
n/y/y
2¾ x 5¼ x 1¼
no
max only
4134
31
Yes
–50 to 1999°F / –50 to 1300°C
1°
±0.3% + 1°C
0.12
36
n/y/y
2¾ x 5¼ x 1¼
no
max only
4029
32
Yes
–50 to 1999°F / –50 to 1230°C
0.1°
±0.3% + 1°C
0.12
44
n/y/y
7 x 3 x 1¼
no
no
4003
32
Yes
–328 to 2372°F / –200 to 1300°C
0.1° / 1°
±0.3% + 1°C
0.12
48
y/y/y
2 / x 7 x 1¼
no
yes
4004
33
Yes
–58 to 2000°F / –50 to 1300°C
0.1° / 1°
±0.3% + 1°C
0.12
48
n/y/y
3 x 7¼ x 1¼
no
max only
4007
33
Yes
–328 to 2498°F / 200 to 1370°C
0.1°
±1.0
6¼
40
n/n/y
2¾ x 7 x 1¼
no
yes
4137
35
Yes
–50 to 1999°F / –50 to 1230°C
0.1°
±(1 + 0.75%)
0.12
48 (2)
n/y/y
7 x 3 x 1¼
no
yes
4425
35
Yes
–58.0 to 2372°F / –50.0 to 1300°C 0.1°
±(1 + 0.75%)
5
40
n/n/y
2¾ x 5½ x 1¼
no
no
Cat. No.
Range
Resolution
Length (inch)
Accuracy
(°C)
Probe
Cable
Unit Size
(inch)
23
Alarm
Display
Min/Max
Traceable® Pocket-Size™ Type-K Thermometer
Shockproof, pocket-size thermometer is ideal for lab, plant, and field use. New microchip design
sign
provides ultra low cost unit. Wide-range, fast-response, and one-switch operation make it thee
perfect routine thermometer. It is compatible with all Type-K probes. Range is –58 to 1382°F
or –50 to 750°C, with a resolution of 1° and meter accuracy of ±(1°C + 0.75%) between 0 to
500°C and ±(1°C + 1%) 500 to 750°C. Below 0 accuracies are: –20°C ±2°C, –40°C ±4°C,
and –50°C ±5°C. To assure accuracy an individually serial-numbered Traceable® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability
ity
to standards provided by NIST (National Institute of Standards and Technology).
Comes ready to use with a fast-response, Type-K probe with beaded sensor, 4-foot cable, nylon
ylon
carrying case, and battery. Size: 2¾ x 4¼ x 7/8 inches. Weight: 4 ounces.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable® Pocket-Size™ Type-K Thermometer
4232
Traceable® Pocket-Size™ Type-K Thermometer
4233
29
Traceable® Total-Range Thermometer
Total-Range Thermometer reads –200 to 1370°C
Thermometer reads from –328 to 2498°F and –200 to 1370°C with a resolution of 0.1° and
1°. Switch from °F to °C at the touch of a key. Jumbo-size, 5/8-inch-high digits are readable
from 10 feet away. Unit features HOLD key that freezes display to capture current reading.
A microprocessor updates the display twice a second. Rugged unit is constructed of shockresistant ABS plastic. Water-resistant case stops dirt, dust, fumes, and water—perfect for use in
lab or plant’s worst environment.
Use with all Type-K probes
Meter-only accuracy: ±1°C between –50°C to 740°C, otherwise ±2°C. Uses all Type-K
thermocouple probes. At the touch of a key, recalls minimum and maximum temperature
readings captured during any time. Alarm function may be set in 1° increments. Alarm
sounds when the temperature rises above or falls below high/low set points. Count-up
timer alarm may be set from 23 hours 59 minutes to 1 minute. Alarm sounds when time is
up. Back-lighting permits reading in dark areas. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology).
Designed for rough handling
Supplied: PVC casing, flip-out stand, Traceable® Certificate,batteries, Type-K beaded probe,
4-foot cable. Size: 3¼ x 7 x 1½ inches. Weight: 8 ounces.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable Total-Range Thermometer
4015
®
Traceable® Expanded-Range Thermometer
Pocket-size, Expanded-Range Thermometer is inexpensive
Shockproof, pocket-size thermometer is ideal for lab, plant, and field use.
Expanded-range, fast-response, and one-switch operation make it the perfect
routine thermometer. Range is –40 to 2000°F or –40 to 1200°C. Resolution is
1° and meter only accuracy is ±(1°C + 1%) from 0 to 750°C. Two probes allow
simultaneous monitoring of two tests. This thermometer is designed for simple
operation. Three-position switch indicates probe 1, probe 2, or off. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our
ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology).
As small as a 3x5-inch card
Comes ready to use with two fast-response, Type-K beaded sensors, battery, and
4-foot cable. Size: 3 x 5 x 1 inch. Weight: 4 ounces.
(For a complete description of Type-K accessory probes see page 34.)
30
Description
Cat. No.
Traceable® Expanded-Range Thermometer °F
4025
Traceable® Expanded-Range Thermometer °C
4026
Traceable® Two-Channel
Thermometer with Offsets
Provides recessed front panel adjustable offsets on two channels allowing user to adjust
thermometer exactly to a specific temperature, in-house calibration, or particular sensor for
increased accuracy.
Shockproof rubber case
Provided rubberized case makes it a virtually environment-proof instrument for all weather,
shock, and abusive conditions.
Temperatures to 1999°F
Large LCD shows temperatures of probe 1, probe 2, or the difference (delta) of the two probes.
Readout in °F and °C. Temperature range is –58 to 1999°F and –50 to 1300°C. Resolution
is 1°. Meter only accuracy is ±0.3% plus 1°C. Three-quarter-inch-display is readable from 12
feet. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology).
Stores highest temperatures reached
MAX key captures the highest reading achieved. HOLD key freezes display to capture current
reading. Uses all Type-K thermocouples. Supplied: Velcro® strap, stand, two probes, and
Traceable® Certificate. Size: 2¾ x 5¼ x 1¼ inches. Weight: 5½ ounces.
User Adjustable
Calibration Offsets
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable® User Adjustable Offset Thermometer
4135
Traceable® Digital Thermometer with Recorder Output
Recorder jack provides a millivolt signal output. This enables thermometer to be used with any chart
recorder, strip recorder, or computer that accepts millivolt signals. Monitor conditions in chambers,
clean rooms, food processing, scientific labs, and all temperature-sensitive manufacturing operations.
Recorder output provides a hard copy for today’s stringent QC documentation requirements. Output
specifications are 1 mV output per degree in 0.1° display mode and 0.1 mV output per degree in the 1°
display mode. Range is –50 to 1999°F and –50 to 1300°C, with a meter-only accuracy of ±0.3% of the
reading plus 1°C. Resolution is 0.1° from –50.0 to 199.9° and is 1° for other readings.
Stores highest readings reached
MAX key captures the highest reading achieved. HOLD key freezes display to capture current reading.
Uses all Type-K thermocouples. Large, bright, ½-inch-high, four-digit LCD can be read from 10 feet
away. Unit is completely portable and designed for years of dependable and reliable service.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Comes ready to use with fast-response, Type-K beaded probe with
3-foot cable, 9-volt battery, recorder output jack, and Traceable® Certificate. Size: 2¾ x 5¼ x 1¼ inches.
Weight: 5½ ounces
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable® Digital Thermometer with Recorder Output
4134
31
Traceable® Dual-Channel Thermometer
Thermometer shows two probe readings and the
difference between readings
Monitors temperatures using two probes. Dual-display simultaneously shows
temperature of both probes or temperature of one probe and the difference between
probes (T1-T2). With two separate sensors, it is easy to note temperature variations
in an incubator/oven or temperature gradations in a water bath. Sense changes
between inlet and outlet temperatures in any system. HOLD key freezes the display.
Temperature range to 1230°C
Temperature ranges are –50.0 to 1999°F and –50.0 to 1230°C. Resolution is 0.1° under 200°
and 1° above 200°. Meter-only accuracy is 0.3% plus 1°C. Extra-large, ¾-inch-high display
lay is
readable from 15 feet. Uses all Type-K thermocouple probes.
Chemical-and shock-resistant case
Ideal for quality control, measuring temperatures in petroleum products, and biotechnology
g
gy
applications. Case is chemical and shock-resistant ABS plastic. To assure accuracy an individually
n
ndividually
serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
a
atory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
i
itute
of
Standards and Technology). Supplied: battery, two fast-response Type-K beaded probes,, 48-inch
48 inch
cable. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable® Dual-Channel Thermometer
4029
Traceable® Waterproof Type-K Thermometer
Trac
Wide range thermometer reads –200 to 1300°C
Thermo
Thermometer
reads from –328 to 2372°F and –200 to 1300°C with a resolution of 0.1° and 1°.
Switch from °F to °C at the touch of a key. Bright, 5/8-inch-high digits are readable from 10 feet
away. Back-lighting
B
key permits reading in dark areas. Unit features HOLD key that freezes
display to capture current reading. Battery powers unit for 1 year of routine use.
Waterproof to seal out moisture
Water
One of the most technically advanced, fastest-reading, yet easy-to-use thermometers ever
designed. A microprocessor updates the display 2.5 times per second. Rugged unit is constructed
design
of shock-resistant
shoc
ABS plastic. Waterproof design stops dirt, dust, fumes, and water—perfect for
use in lab or plant’s worst environment. Supplied rubber boot for probe connector allows the unit
to rema
remain waterproof with thermocouple attached. At the touch of a key, recalls minimum and
maximum temperature readings. Meter-only accuracy: ±0.3% of the reading plus 1°C between
maxim
–200°C to 1000°C, otherwise 0.5% of the reading plus 1°C. Unique differential feature shows the
difference in temperature from a set point. Uses all Type-K thermocouple probes.
differen
Traceable to NIST for accuracy
Trace
To ass
assure accuracy an individually serial-numbered Traceable® Certificate is provided from our
ISO 17025
17
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
b NIST (National Institute of Standards and Technology).
Designed for rough handling
Desig
Supplie carrying case, Traceable® Certificate, 9-volt battery, and fast-response, Type-K beaded
Supplied:
probe with
w cable length of 4-feet. Size: 22/3 x 7 x 1¼ inches. Weight: 8 ounces.
(For a ccomplete description of Type-K accessory probes see page 34.)
32
Description
Descri
Cat. No.
Traceable® Waterproof Type-K Thermometer
Tracea
4003
Traceable® Big Digit Type-K Thermometer
Wide-range thermometer reads –50 to 1300°C
Thermometer reads from –58 to 2000°F and –50 to 1300°C with a resolution of 0.1° and 1°. Switch from
°F to °C at the touch of a key. Easy-to-read big digits measure over 5/8-inch-high and are readable from
15 feet away. Unit features HOLD key that freezes display to capture current reading. Max Hold feature
permits capturing and displaying the highest temperature achieved over any time period.
Innovative design, simple operation
Intuitive, four-key operation makes it easy to use. Microprocessor updates the display 2.5 times per
second. Rugged unit is constructed of shock-resistant ABS plastic. Meter-only accuracy: ±0.3% of the
reading plus 1°C between –50°C to 1000°C, otherwise 0.5% of the reading plus 1°C. Uses all Type-K
thermocouple probes.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Supplied: carrying case, Traceable® Certificate, 9-volt battery, and
fast-response, Type-K beaded probe with 4-foot cable. Size: 3 x 7¼ x 1¼ inches. Weight: 7 ounces
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable Big Digit Type-K Thermometer
4004
®
Traceable® Memory Wide-Range Thermometer
Thermometer temperature range covers –328 to 2498°F and –200 to 1370°C. Resolution is 0.1 from
–200 to 640°C (–328 to 990°F) otherwise 1°. Meter only accuracy is ±1°C.
Triple-purpose probe
Supplied stainless-steel, triple-purpose, Type-K thermocouple probe may be used to measure temperatures of liquids, air/gas, and semisolids. Large, ½-inch-high LCD is easy to read. Thermometer
accepts any Type-J, K, or T probe. Minimum and maximum readings may be recalled instantly. Unit
features backlit display so that answers may be read in poor lighting—even total darkness. Computer
output allows thermometer to be connected to a computer or data logger for capturing and storing
readings. Count-up timer provides a relative time measurement while taking temperatures and recording Min/Max memories.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology). Supplied: stainless-steel Type-K thermocouple probe,
battery, and Traceable® Certificate. Size: 2¾ x 7 x 1¼ inches. Weight: 6½ ounces.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable® Memory Wide-Range Thermometer
4007
Data Acquisition System (complete description on page 103)
4237
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
Wireless Capable
(see page 103)
33
Type-K Beaded Probe
4028
Fast-response, Type-K thermocouple, beaded probe. PTFE cable can withstand
temperatures of –40 to 250°C continuous or 300°C short-term use. Dimensions: 0.06inch diameter probe with 4-foot cable for use with all Type-K thermometers in liquids, air/
gas, and semisolids.
Description
Cat. No.
Type-K Beaded Probe
4028
Stainless-steel Type-K Probe
4014
Stainless-steel with handle, triple purpose (liquids, air/gas, and semisolids), Type-K (NiCr/
NiAl) probe. Temperature range is –50 to 700°C. Dimensions: 0.13-inch diameter; 5-inch stem
length; 7½-inch overall length. Supplied: 40-inch cable.
Description
Cat. No.
Stainless-steel Type-K Probe
4014
Low Temperature Type-K Probe
Stainless-steel with handle, triple purpose (liquids, air/gas, and semisolids), Type-K (NiCr/NiAl)
probe. Temperature range is –240 to 220°C. Dimensions: diameter 0.17 inch; stem length 12
inches; overall length 17 inches. Supplied: 8-foot expandable cable.
8039
Description
Cat. No.
Low-Temperature Type-K Probe
8039
High Temperature Type-K Beaded Probe
8613
4008
Ten-foot-long 0.19-inch diameter braided metal wire cable with smooth tip measures –73 to
982°C continuous or 1093°C short-term use. For use with all Type-K thermometers in liquids, air/
gas, and semi-solids.
Description
Cat. No.
High-Temperature Type-K Probe
H
8613
Type-K Surface Probe
Stainless-steel probe with handle, is for use with Type-K thermometers. Temperature range is
–73 to 760°C. Dimensions: 5-inch probe length; 0.5-inch tip diameter; 8½-inch overall length.
Supplied: 36-inch cable.
34
Description
Cat. No.
Type-K Surface Probe
4008
Traceable® Double Thermometer
Serial computer output allows thermometer to be connected to computer or data logger
for capturing and storing results. Resolution is 0.1° (from –50.0 to 199.9°F) and 1° in both
°C and °F over the entire range of –50 to 1999°F or –50 to 1230°C. Meter only accuracy
is ±(1 + 0.75%). Memory recalls maximum and minimum readings. HOLD key freezes
display for reading later. Dual channels permit monitoring two separate probes. Dual display
simultaneously shows temperature of both probes or temperature of one probe and the
difference between probes (T1-T2).
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Digits are
¾-inch high. Case is impact-resistant ABS plastic. Uses all Type-K thermocouple probes.
Supplied: two fast-response probes, two 48-inch cables, 9-volt battery, and Traceable®
Certificate. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
(For a complete description of Type-K accessory probes see page 34.)
Wireless Capable
(see page 103)
Description
Cat. No.
Traceable® Double Thermometer
4137
Accessories
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
Traceable® Workhorse™ Thermometer
Type-K Workhorse™ Thermometer provides a sharp readout in dim and very bright
light. Unit provides a long battery life (150 to 200 continuous hours), high accuracy,
wide temperature range, and a new chip design for an ultra low cost.
Type-K range is –58.0 to 2372°F and –50.0 to 1300°C. Resolution is 0.1° between
–50.0 to 200.0 and 1° elsewhere. Meter accuracy is ±(1°C + 0.75%) between 0 to
500°C; ±(1°C + 1%) 500 to 750°C; ±(1°C + 2%) 750 to 1000°C; ±(3°C + 4%) 1000 too
1200°C; ±2°C at –20; ±3°C at –40; and ±4°C at –50.
Recessed front panel adjustable offset allows user to adjust thermometer exactly
to a specific temperature, in-house calibration, or a particular sensor for increased
accuracy. HOLD key freezes display to capture current reading. It is compatible with
all Type-K probes. To assure accuracy an individually serial-numbered Traceable®
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology).
Supplied: fast response Type-K probe, bench stand, 9-volt battery, and carrying case.
Probe diameter is 1/8-inch, stem length 31/8 inches, overall length 5 inches, and 40-inch
cable. Size: 2¾ x 5½ x 1¼ inches. Weight: 6 ounces.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable® Workhorse™ Thermometer
4425
Adjustable Offset
35
Traceable® Printing Thermometer
Printing Thermometer provides permanent record, prints time and date
Provides permanent record of temperature and time of day/date/month. Unit prints the time and date for
maximum only, minimum only, average only, and in circularly mode T1, T2 and differential. Automatic printing
may be programmed to print in any interval from 3 seconds to 23 hrs 59 mins 59 secs. The perfect unit to
monitor temperature in lab, plant, and field. Fulfils federal requirements for CLIA specification 493.1252.
Hard copy results
Printer provides hard copy for today’s stringent quality-control documentation. Minimum, maximum, and average
temperature memories may be displayed or cleared at any time with the touch of a key. Memory feature permits
monitoring conditions overnight, on weekends, or for any time period. Alarm may be set in 0.1° increments.
Alarm sounds when temperature rises above or falls below set points. Alarm output feature may be used to
trigger an external device. Displays temperatures from –328 to 2431°F and –200 to 1333°C with a resolution
of 0.1° and an accuracy of ±1°C from –50 to 982°C, otherwise ±1.5 °C. Dual probe inputs allow displaying the
temperature of probe 1, probe 2, or the difference (delta) of probe 1 and 2. Thermometer will accept any Type- J,
K, T, or E probe. Display is updated every second.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Supplied: two fast-response Type-K beaded sensors with 4-foot cable,
Traceable® Certificate, batteries, two thermal paper rolls, ABS carrying case, and batteries. Accessory adaptor for continuous AC operation is
available. Tough ABS plastic case is chemical- and shock-resistant. Unit is 7½ x 3 x 1½ inches. Weight: 10 ounces.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable Printing Thermometer
4100
®
Infrared Thermometer Selection Chart
Page
No.
Traceable
Certificate
Supplied
4475
37
4480
®
Field
of View

Emissivity

Laser
Min/Max
Readings
Hi/Lo
Alarms
Hold
Special Features
Range
Resolution
Accuracy
(°C)
Yes
–7.0 to 230°F / –22.0 to 110°C
0.1°
±1°C
1:1
0.95 fixed
N/A
Yes
N/A
Yes
Key-chain
37
Yes
–27 to 428°F / –33 to 220°C
0.1°
±1 + 2%
1:1
0.95 fixed
N/A
N/A
N/A
Yes
Pocket-clip/strap/
key-chain
4481
37
Yes
–67 to 482°F / –55 to 250°C
0.1°
±1 + 2%
6:1
0.5 to 1.00*
Yes
Yes
N/A
Yes
Wrist strap
4472
38
Yes
0 to 788°F / –20 to 420°C
1°
±2 or 2%
8:1
0.3 to 1.00*
Yes
Yes
Yes
Yes
9 memories
4470
38
Yes
–76 to 932°F / –60 to 500°C
0.1°
±2 or 1%
11:1
0.95 fixed
Yes
MAX only
N/A
Yes
Trigger grip
4482
38
Yes
–76 to 932°F / –60 to 500°C
0.1°
±1 + 2%
12:1
0.1 to 1.00*
Yes
Yes
Yes
Yes
Trigger grip
4485
39
Yes
–76 to 1022°F / –60 to 550°C
0.1°
±2 or 2%
12:1
0.1 to 1.00*
Yes
Yes
Yes
Yes
Dual lasers
4375
39
Yes
4 to 752°F / –20 to 400°C
0.1°
±3 or ±3%
7:1
0.2 to 1.00*
Yes
Yes
N/A
Yes
Trigger grip
±1.5% + 2°C
50:1
0.95 fixed
Yes
N/A
N/A
Yes
Trigger grip
Cat. No.
4483
40
Yes
–58 to 1832°F / –50 to 1000°C
0.1° to 200,
1° over 200
4484
40
Yes
–58 to 1832°F / –50 to 1000°C
0.1° to 200,
1° over 200
±1.5% + 2°C
50:1
0.1 to 1.00*
Yes
Yes
Yes
Yes
Trigger grip
4315
40
Yes
14 to 572°F / –10 to 300°C
0.1°
±2 or 2%
7:1
0.1 to 0.95*
N/A
Yes
N/A
Yes
Probe, 4’ cable
*Indicates adjustable emissivity in steps of 0.01°
36
What is Field of View?
What is Emissivity?
Field of View is similar to a flashlight. The further the object
is away, the bigger the diameter of the beam. The further you
are from a sample, the larger the area the IR thermometer
is measuring. For example: if the Field of View ratio for a
thermometer is 6:1, then, when the thermometer is 6 inches
from an object the sensor is looking at and measuring a
1-inch diameter. If the thermometer is 1¼ inches away, then
the spot size being measured is ¼-inch.
Emissivity refers to the amount of infrared radiation
an object emits. The emissivity adjustment on IR
thermometers is used to compensate for different
materials. The default emissivity of 0.95 covers 90% of
typical applications. For thermometers with adjustable
emissivity a materials chart with suggested settings is
provided. Generally very shiny, highly reflective surfaces
require low emissivity settings.
Traceable® Micro IR Thermometer
New generation in IR—the pocket revolution
Pocket-size, infrared thermometer captures temperature readings of any surface—liquids, solids, and semisolids in less
than a second. Operation is simple—turn it on, point at sample, and take reading. Non-invasive, no-touch temperature
measurements are ideal for food, life sciences, field use, clean rooms, and for fast inspections. Range is –7.0 to 230°F
and –22.0 to 110°C with a resolution of 0.1°. Accuracy is ±1°C between 15.0 to 40.0°C, and ±1.5°C outside of this range.
Emissivity is fixed at 0.95. Field of view is 1:1. Sophisticated break-thru and remarkable performance are a result of NASAstyle microelectronics.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and
Technology). Features include: easy-read ½-inch-high digital display, soft-touch keys, key-chain, switchable °C/°F, hold, min
only/max only readings, low battery alert, flip-open stand, battery. Size: 2½ x 1½ x ½ inches. Weight: 1 ounce.
Description
Cat. No.
MiniiiIR™ Traceable® Thermometer
4475
Traceable® Infrared Thermometer with Pocket Clip
Traceable® Infrared Thermometer operation is simple
Turn on, point at sample, and take a reading in less than a second. Unit reads both Fahrenheit and
Celsius of any surface—solids, semisolids, and liquids. Non-invasive, no-touch measurements
are ideal for food, life sciences, pharmaceuticals, petroleum products, clean rooms, and electronics.
Temperature range is –27 to 428°F and –33 to 220°C. Resolution is 0.1°. Accuracy is ±1°C + 2%.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
ST
(National Institute of Standards and Technology). Hold freezes the display at the current reading. Fieldd of
view is 1:1. The fixed emissivity of 0.95 covers 90% of all applications. Supplied: pocket clip, key-chain,
lanyard, battery, Traceable® Certificate. Size: 3¼ x ¾ inches. Weight: ¾ ounces.
Description
Cat. No.
Traceable Infrared Thermometer with Pocket Clip
4480
®
Traceable® Infrared Laser Thermometer with Wristband
Traceable® Infrared Laser Thermometer is simple to operate—turn on, point at sample, and take a reading in less than
a second. Unit reads both Fahrenheit and Celsius of any surface—solids, semi-solids, and liquids. Non-invasive, notouch, measurements are ideal for food preparation, life sciences, pharmaceuticals, petroleum products, clean rooms,
electronics, and field use.
Temperature range is –67 to 482°F and –55 to 250°C. Resolution is 0.1°. Accuracy is ±1°C
+ 2%. To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Hold freezes
the display at the current reading. Field of view is 6:1. The emissivity is 0.05 to 1.00 in .01
steps. Minimum and maximum feature permits viewing highest and lowest readings at
any time. Laser beam permits perfect sample target sighting. Supplied: wristband, battery,
Traceable® Certificate. Size: 4 x 2 x ¾ inches. Weight: 2¼ ounces.
Description
Cat. No.
Traceable® Infrared Laser Thermometer with Wristband
4481
37
Traceable® Infrared Thermometer with Memory/Alarm
Utilizes laser targeting for precise touchless measurement
Temperature range is 0 to 788°F and –20 to 420°C with a resolution of 1° and an accuracy of ±2°C or 2% of the reading.
Small, lightweight, unit takes readings in under one second. Laser beam permits perfect temperature target sighting. Use in
petroleum, electronics, plants, and outdoors. Use with liquids or solids. Keys permit adjusting emissivity from 0.3 to 1.0. Field
of view is 8:1 (reads a spot the size of 2 inches from 16 inches away).
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and
Technology). Features include backlighting at the touch of a key, data hold freezes display reading, laser, maximum/minimum
memory, 9 memories, high/low audible alarm, average readings, differential readings, low-battery indicator, and a °C/°F key.
Size: 6 x 2 x 1¼ inches. Weight: 6 ounces. Supplied: wrist-strap, soft-sided carrying case, battery, Traceable® Certificate.
Description
Cat. No.
Traceable Infrared Thermometer with Memory/Alarm
4472
®
Traceable® Infrared Thermometer Gun
Small, lightweight Traceable® Infrared Thermometer Gun takes instant, less-than-a-second, temperature readings
of any surface. Unique design permits one-handed point-and-shoot readings. Laser-sighting beam permits aiming
precisely at target surface. Use for food, pharmaceuticals, electronics, safety inspection, and any liquid or solid.
Range is –76 to 932°F and –60 to 500°C with a resolution of 0.1°. Accuracy: ±2°C + 1% of reading. Emissivity is fixed
at 0.95. Field of view is 11:1 (reads a spot the size of 2 inches from 22 inches away). Features include backlightingg at
the touch of a key, data hold freezes display reading, laser, low-battery indicator, automatic maximum recording, °C/°F
C/°F
key, and an auto-off feature.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
on
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
rds
and Technology). Size: 7 x 3 x 1½ inches. Weight: 6 ounces. Supplied: two batteries, Traceable® Certificate.
Description
Cat. No.
Traceable Infrared Thermometer Gun
4470
®
Traceable® Infrared Thermometer with Trigger Grip
Traceable® Infrared Thermometer, operation is simple—turn on, point at sample, and take a reading in less than a
second. Unit reads °F/°C of any surface—solids, semi-solids, and liquids. Non-invasive, no-touch, measurements are
ideal for food preparation, life sciences, pharmaceuticals, petroleum products, clean rooms, electronics, and field use.
IR temperature range: –76 to 932°F and –60 to 500°C. Resolution: 0.1°. Accuracy: ±1°C + 2%.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology). The dual display shows current temperature plus one of the following eight modes: emissivity value,
maximum memory, minimum memory, differential, average (time weighted), high temperature alarm, low temperature
alarm, and probe temperature. Min/Max feature permits viewing highest and lowest readings at any time. Thermometer displays the average of all readings made and the difference between two readings.
Audible, high and low alarms signal out of range conditions. Memory permits recalling individually captured temperatures. Hold freezes the display at the current reading. Backlighting permits viewing in low light conditions. Adjustable
emissivity from 0.1 to 1.00. Field of view is 12:1. Type-K thermocouple jack range: –83 to 2552°F and –64 to 1400°C.
Supplied: Type-K probe, batteries, and Traceable® Certificate. Size: 7 x 2¾ x 1½ inches. Weight: 6 ounces.
(For a complete description of Type-K accessory probes see page 34.)
38
Description
Cat. No.
Traceable® Infrared Thermometer with Trigger Grip
4482
Traceable® Infrared Dual Lasers Thermometer
with Type-K Probe
Traceable® Infrared Dual Laser Thermometer, operation is simple—turn on, point at sample, and
take a reading in less than a second. Dual lasers indicate the diameter of the surface area being
measured and the white LED light illuminates the surface. Field of view is 12:1 (at a distance of 24
inches the reading spot size is 2 inches). Unit reads both Fahrenheit and Celsius of any surface—
solids, semisolids, and liquids. Non-invasive, measurements are ideal for food, life sciences,
pharmaceuticals, petroleum products, clean rooms, electronics, and field use. Temperature range
is –76 to 1022°F and –60 to 550°C. Resolution is 0.1°. Accuracy is ±2% of the reading or 2°C,
whichever is greater.
The dual display shows current temperature plus one of the following eight modes:
emissivity value, maximum memory, minimum memory, differential, average (time weighted),
high temperature alarm, low temperature alarm, and probe temperature. Minimum and
maximum feature permits viewing highest and lowest readings at any time. Thermometer
displays the average of all readings made while taking measurements and the difference
between two readings. Audible, user settable, high and low alarms signal out of range
Dual lasers show the
conditions. Display backlight permits viewing in low light conditions. For measurement of
diameter of area being
different types of material, adjustable emissivity may be set from 0.1 to 1.00 in increments of measured
0.01. Range using Type-K thermocouple jack is –83 to 2552°F and –64 to 1400°C.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Type-K
beaded temperature sensor and two batteries are supplied with unit. Size: 7 x 3¾ x 2
inches. Weight: 9 ounces.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable Infrared Dual Lasers Thermometer with Type-K Probe
4485
®
Traceable® Noncontact
Temperature Infrared Thermometer
Portable noncontact, infrared temperature measuring thermometer features adjustable
emissivity. This control provides the widest possible range for accurately measuring different
surface temperatures. Unique gun design allows one-handed use.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology). Adjustable emissivity from
0.2 to 1.0. Field of view is 7:1 (at a distance of 21 inches the reading spot size is 3 inches).
Surface temperature range is switchable from –4.0 to 752°F and –20.0 to 400°C. Resolution:
0.1°. Accuracy: ±3°C or ±3% of the reading, whichever is greater.
Min/Max memory
Features data hold, maximum memory, minimum memory, and 1-second sampling. Dimensions: 7¾ x 4¾ x 21/3 inches. Weight: 95/8 ounces. Supplied: Traceable® Certificate, Type-K
beaded probe, carrying case, and battery.
(For a complete description of Type-K accessory probes see page 34.)
Description
Cat. No.
Traceable® Noncontact Temperature Indicator
4375
39
Traceable® Infrared Wide-Range Thermometer Gun
with 50:1 field of view
Infrared Thermometer Gun takes instant, less-than-a-second, temperature readings of any
surface. Unique design permits one-handed point-and-shoot readings. Laser-sighting beam
permits aiming precisely at target surface. It is ideal for food preparation, pharmaceuticals,
field use, electronics, and safety inspection.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology). Range: –58 to 1832°F
and –50 to 1000°C with a resolution of 0.1° to 200, 1° over 200. Accuracy: ±1.5% + 2°C.
Field of view is 50:1 (reads a spot the size of 6 inches from 25 feet away). Features include
backlighting at the touch of a key, data hold freezes display reading, laser, low-battery
indicator, and °C/°F keys. Size: 9 x 4 x 2¼ inches. Weight: 10 ounces. Supplied: battery,
carrying case, and Traceable® Certificate.
Description
Cat. No.
Traceable Infrared Wide-Range Thermometer Gun with 50:1 field of view
(Emissivity is fixed at 0.95)
4483
Traceable® Infrared Wide-Range Plus Thermometer Gun with 50:1 field of view
(Emissivity adjustable from 0.10 to 1.00 in 0.01 steps. Also features minimum/
maximum memory, average readings, and high/low alarms.)
4484
®
Traceable® Infrared Digital Thermometer
Probe never comes in contact with surface or solution. Cable permits exact positioning of
the sensor. Jumbo, 13/8-inch-high display may be switched from 14.0 to 572°F and –10.0
to 300°C. Switchable resolution is 0.1° or 1°. Accuracy is ±2°C or 2% of the reading.
Connects to computer or data logger
Serial, computer output allows the thermometer to be connected to a computer or data
logger for monitoring and storing results.
Recalls high, low, and average readings
The field of view is 7:1 (at a distance of 21 inches the reading spot Size: 3 inches). Probe
has an emissivity adjustment with a range of 0.1 to 0.95. This allows all types of material
and liquid to be read. Sensor wavelength is 6 to 12 microns. Ultra-fast sampling rate is
once per second. At the touch of a key, instrument recalls highest, lowest, and average
readings. DATA HOLD key freezes display to capture readings. To assure accuracy
an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology). Supplied: probe (6 x 1½ x 1½
inches), 40-inch cable, Traceable® Certificate, battery, and computer output software.
Size: 7 x 3 x 1½ inches. Weight: 9½ ounces.
40
Description
Cat. No.
Traceable® Infrared Digital Thermometer
4315
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
Wireless Capable
(see page 103)
Traceable® Universal Thermometer with Alarm
Universal Thermometer is affordable and easy to use
Use this thermometer anywhere. Constructed of shock-resistant ABS plastic. Water-resistant case is
sealed with an O-ring gasket to stop dirt, dust, fumes, and water. Perfect for use in lab or plant’s worst
environment. Splash-proof pouch with shoulder strap protects unit and provides probe storage. Reads
°F/°C on a jumbo, ¾-inch-high LCD. Range is –58.0 to 500.0°F and –50.0 to 260.0°C. Resolution is 0.1°
and accuracy is ±1.0°C or 1% of reading. Thermometer monitors temperature continuously for 3 years
and features a selectable display update rate of 1 second or 10 seconds. A high and low alarm may be
programmed in 1° increments. When temperature rises above or falls below the set points, a 1-minute
audible alarm signals an out-of-range condition, and a symbol flashes on the LCD. The alarm mode
may be switched off for use as a non-alarm thermometer. At the touch of a key, memory recalls highest
and lowest temperature readings over any time period.
Countdown timer
Countdown timer function may be programmed in 1-minute increments from 99 hours 59 minutes
(display shows hours, minutes, and seconds remaining). Unit sounds alarm when zero is reached.
Accuracy is 0.01%.
Traceable to NIST for accuracy
To assure accuracy individually serial-numbered Traceable® Certificates for time and temperature are
provided from our ISO 17025 calibration laboratory accredited by A2LA. They indicate traceability to
standards provided by NIST (National Institute of Standards and Technology).
Total package
Supplied: Traceable® Certificates, probe, soft pouch, and batteries. Triple-purpose, stainless-steel probe
(liquids, air/gas, and semisolids) dimensions: diameter 0.14 inch, stem length 4¼ inches, overall length
8 inches. Cable length is 4 feet. Size: 2½ x 6½ x 1 inches. Weight: 8 ounces.
Description
Cat. No.
Traceable® Universal Thermometer with Alarm
4110
Traceable® Disposable Temperature Recorder
Monitor refrigerators, supply rooms, food storage, chemical warehouses, animal
quarters, incubators, goods-in-transit, walk-in chambers, biological materials, and
manufacturing plants.
Single-use, disposable recorder displays temperatures on a 36-inch strip chart. Records
for 10 or 40 days. Temperature range is –20 to 100°F and –28 to 38°C. Displays both
°F and °C on the same chart. Accuracy is ±1°C (±2°F). Solid-state, battery-driven,
quartz-crystal controlled motor turns the chart with an accuracy of better than 1 second
per day. Temperature sensor is bimetallic. It provides a permanent record, which is easy
to read, duplicate, fax, scan, and file. It shows temperature and time/day of occurrence.
Chart, marker, and battery are preloaded, simply pull a tab to begin recording.
Eliminates messy pens, expensive instrumentation, confusing software, and training.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). A tamper evident seal
maintains the integrity of unit and results. Recorded chart remains inside unit until seal is broken. Four-part form on the front permits writing
start-time, date, location, and other pertinent information. The instrument, chart, four-part form, and Traceable® Certificate are all marked
with the same serial number. They provide accurate, permanent, and complete documentation. Supplied: battery and Traceable® Certificate.
Size: 5¼ x 37/8 x 2½ inches. Weight: 10 ounces.
Description
Traceable® Disposable Temperature Strip-Chart Recorder
10 Days
Traceable Disposable Temperature Strip-Chart Recorder
®
40 Days
Cat. No.
4221
4222
41
TIMER CHART
Page
No.
Traceable®
Certificate
Supplied
5135
42
5012
43
5004
5040
Accuracy
Maximum Time
Resolution
Channels
Countdown/
Countup
Clock
Yes
0.01%
100 Hours
1 Second
1
down/up
No
Yes
Extra-extra-large digits
Yes
0.01%
100 Hours
1 Second
4
down/up
Yes
Yes
Personalize your timer
43
Yes
0.01%
100 Hours
1 Second
4
down/up
Yes
Yes
4-channel countdown/up
43
Yes
0.01%
100 Hours
1 Second
4
down/up
Yes
Yes
Easy to program
5000
44
Yes
0.00%
100 Hours
1 Second
3
down/up
Yes
Yes
Continuous alarm
5025
44
Yes
0.01%
20 Hours
1 Second
3
down/up
Yes
Yes
Triple-display
5002
44
Yes
0.00%
10 Hours
1 Second
3
down/up
No
Yes
3 timing channels
5014
45
Yes
0.01%
100 Hours
1 Second
2
down/up
Yes
Yes
100-decibel alarm
5013
45
Yes
0.01%
100 Minutes
1 Second
1
down/up
No
Yes
Automatic memory
5017
45
Yes
0.01%
100 Hours
1 Second
2
down/up
No
Yes
Large display
5008
46
Yes
0.01%
100 Hours
1 Second
3
down/up
Yes
Yes
3-line display
5030
46
Yes
0.01%
24 Hours
1 Second
1
down
No
Yes
Memory
5015
46
Yes
0.01%
24 Hours
1 Second
1
down/up
Yes
Yes
Repeat countdown and talking
5006
47
Yes
0.01%
24 Hours
1 Second
2
down/up
Yes
Yes
2-channel countdown/up
5035
47
Yes
0.01%
24 Hours
1 Second
1
down/up
Yes
Yes
Compact all-in-one
5132
47
Yes
0.01%
24 hours
1 second
2
down/up
Yes
Yes
Ultra-compact
5022
48
Yes
0.01%
24 Hours
1 Second
2
down/up
Yes
Yes
Jumbo-display black
5023
48
Yes
0.01%
24 Hours
1 Second
2
down/up
Yes
Yes
Jumbo-display white
5021
48
Yes
0.01%
100 Hours
1 Second
1
down/up
Yes
Yes
Numbered keys
5020
48
Yes
0.01%
100 Minutes
1 Second
1
down/up
No
No
Numbered keys
5127
49
Yes
0.01%
20 Hours
1 Second
2
down/up
Yes
Yes
Two-line display
5007
49
Yes
0.01%
24 Hours
1 Second
1
down/up
Yes
Yes
Lab-top
5028
49
Yes
0.01%
100 Minutes
1 Second
1
down
No
Yes
Automatic memory
5042
50
Yes
0.01%
100 Minutes
1 Second
1
down
No
Yes
Easy to use
5027
50
Yes
0.01%
10 Hours
1 Second
1
down/up
Yes
Yes
Clock, timer, stopwatch
5122
50
Yes
0.01%
100 Minutes
1 Second
1
down
No
Yes
Memory
5011
51
Yes
0.01%
100 Minutes
1 Second
1
down/up
No
Yes
Jumbo digits
5133
51
Yes
0.01%
166 Hours
1 Second
1
down/up
No
Yes
Times up, flashing LED
5026
51
Yes
0.01%
20 Hours
1 Minute
1
down
No
No
Easy 3-key operation
5046
52
Yes
0.01%
100 Hours
1 Second
1
down/up
No
Yes
Clips to everything
5036
52
Yes
0.01%
100 Minutes
1 Second
1
down
No
Yes
Water-resistant
5043
52
Yes
0.01%
24 Hours
1 Second
1
down/up
Yes
Yes
Lanyard
1060
53
Yes
0.01%
20 Hours
1 Minute
1
down/up
No
No
Key-chain
5047
53
Yes
0.01%
20 Hours
1 Minute
1
down
No
No
Postage stamp size
5045
53
Yes
0.01%
100 Hours
1 Second
1
down/up
No
No
Key-chain
5041
53
Yes
0.01%
20 Hours
1 Minute
1
down/up
No
Yes
Key-chain
Cat. No.
Memory
Features
®
Trace
Traceable
Extra, Extra,
Large Digit Countdown Timer
Extreme 1½ inch digit size for easy viewing from up to 60 feet away. Reliable, 3-key operation
makes countdown
c
settings in 1 second increments easy to program. Timer countdowns and
alarms on
o single channel for ease-of-use. Counts up during alarming indicating elapsed time
since alarming.
al
Times up to 99 minutes, 59 seconds with one second resolution. Automatic
Bounceback™ Memory for repetitive timing. Accuracy is 0.01%. Counts up in stopwatch mode.
Bounce
To assu
assure accuracy an individually serial-numbered Traceable ® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology). Supplied: 4-Way holder—
provide
hanger, clip-on, easel bench stand, magnetic back, battery, and Traceable ® Certificate. Size: 31/8 x
hange
2¾ x 1-inch. Weight: 2¾ ounces.
42
Description
Desc
Cat. No.
Traceable® Extra, Extra, Large Digit Countdown Timer
Trace
5135
Traceable® Multi-Colored™ Timer
Personalize your timer, show your distinct style with customized bold colors
Three, bright, colorful frames permit personalization of timer. Counts down and alarms on 4
channels, and counts up during alarming indicating elapsed time since alarming. Automatic
Bounceback™ Memory for repetitive timing. Times up and down from 99 hours, 59 minutes, and
59 seconds. Resolution is 1 second. Accuracy is 0.01%. Time-of-day clock (12/24 hour).
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology). Supplied: bench stand/clip,
magnetic back, Traceable ® Certificate, battery. Size: 2¾ x 2¼ x ½-inch. Weight: 2¾ ounces.
Description
Cat. No.
Traceable® Multi-Colored™ Timer
5012
Traceable® Four-Channel Alarm Timer
Easy on the eyes
Ea
Ma
Massive,
¾-inch-high display permits viewing from across the lab. Microcomputer chip permits setting 4
separate channels. Set any countdown time from 99 hours, 59 minutes, 59 seconds to 1 second. When
se
zero is reached, the timer starts counting up to show time elapsed since alarming. Additional features
ze
include stopwatch, time-out, and time-of-day clock.
inc
Al 4 channels may be used simultaneously in any combination to count down or count-up. At the touch of
All
a key the remarkable memory returns the display to the previously programmed countdown time (perfect timer to dedicate to a repetitive test). Extra-loud, high-decibel alarm sounds for 1 minute or may be
fec
silenced manually. Finger-size keys make it easy to set times and change channels.
sil
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
17
(National Institute of Standards and Technology). Supplied: magnetic back, flip-open stand, spring
(N
fastener,
fas
an opening for lanyard, battery. Accuracy: 0.01%. Size: 2¾ x 2½ x ½ inches. Weight: 2 ounces.
Description
Cat. No.
Traceable® Four-Channel Alarm Timer
5004
Traceable® 100-Hour Timer
Reduce uncertainty in your life—own our friendliest timer
Counts down, alarms, times up, and tells time of day with uncompromising precision and is also very
user-friendly. Innovative 100-Hour Timer fulfills virtually every lab timing requirement. Multi-channels
time down, time up, and tell time of day. It’s the workhorse of the lab.
Timer operates on all channels simultaneously. It has five countdown channels, a stopwatch, and
a time-of-day channel. Counts both up and down to 99 hours, 59 minutes, 59 seconds. Accuracy
is 0.01%. Unique thru-zero feature allows counting down, alarming, and counting up. A time-out
mode stops the timer for off periods in both up and down timing. T1 through T4 may be started
simultaneously or individually.
Extra-large, 1/3 -inch-high display and vivid LCD digits continuously show the time remaining and are
readable from 6 feet. Alarm may be turned off manually or is automatically silenced after 1 minute.
A TIME IS UP message is flashed on the display.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory accredited by
A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied: magnetic back, flipopen stand, spring fastener, an opening for lanyard, battery. Size: 2¾ x 23/8 x 5/8 inches. Weight: 1½ ounces.
Description
Cat. No.
Traceable 100-Hour Timer
5040
®
43
Traceable® Three-Channel Alarm Timer
Triple display
The ultimate user-friendly timer fulfills every lab’s timing needs. Displays three different times simultaneously,
counts down, and alarms. Also functions as a stopwatch and a time-of-day clock. Three different tests may
be run at the same time and channels may be started individually or simultaneously. Timer can concurrently
signal the duration of incubating, heating, and cooling. Program each channel from 1 second to 99 hours, 59
minutes, and 59 seconds. When zero is reached, an alarm sounds, “TIME’S UP” flashes on the display, and
timer begins counting up.
Adjustable alarm volume and duration
Adjustable alarm volume allows setting the timer to high for noisy areas or low for quiet environments. Alarm may be set to silence
automatically after 1 minute or to sound continuously until turned off. The continuous setting makes certain that an alarm is never missed.
Memories return the display to the previously programmed time at the touch of a key. Perfect unit to dedicate to a group of repetitive tests.
In the stopwatch mode, the timer counts up from zero. For increased flexibility, the display allows simultaneous up and down timing on
different channels. Unlimited number of time-outs may be taken. Unit displays date and time of day to the second. Quartz-crystal accuracy is
0.001%. Four rubber feet keep the timer off a wet bench. Battery provides 1 year of continuous running. To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and Technology). Supplied: Traceable ® Certificate, alkaline battery. Case is
chemical-resistant ABS plastic. Size: 3¼ x 3 x 1 inches. Weight: 3 ounces.
Description
Cat. No.
Traceable Three-Channel Alarm Timer
5000
®
Traceable® Original Lab Timer
Timer signals drying and incubating times, helps catch all test results, and even alarms for appointments.
The ideal bench-mate for quality-control and experimental requirements. Extremely simple operation makes
it the lab’s most desirable timer.
Accuracy is 0.001%. To assure accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology). Program three different activities from 9 hours, 59
minutes, 59 seconds to 1 second. Each channel has a distinct electronic alarm and display indicator. Alarm-off operates manually or is silenced
automatically after 1 minute.
Large ¼-inch-high LCD digits are easy to read. Carry it with you from the lab—mini-size and light weight make it portable. Chemical-resistant
ABS plastic case is 3 x 3 x 13/8 inches. Weight: 4 ounces. Supplied: Traceable ® Certificate, batteries.
Description
Cat. No.
Traceable® Original Lab Timer
5002
Traceable® Triple-Display Timer
Easily manages three tests simultaneously
Three-line display permits simultaneous countdown alarm timing of three tests. Extra-large, ½-inch digits
are easy to read from across the lab. Times may be set from 19 hours, 59 minutes, 59 seconds to 1 second.
When zero is reached, the timer starts counting up to show time elapsed since alarming. Additional features
include stopwatch, time-out, and time of day.
Three different countdown times may be set and started simultaneously or each channel may be started
individually. For repetitive tests, the memory returns the display to the previously programmed countdown
time at the touch of a key. Loud, high-decibel alarm sounds for 1 minute or may be silenced manually. Timer
is perfect for dedicating to a test requiring several different times. Accuracy is 0.01%. To assure accuracy
an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology). Supplied: magnetic back, battery. Size: 2½ x 33/8 x 7/8 inches. Weight: 3 ounces.
44
Description
Cat. No.
Traceable® Triple-Display Timer
5025
Traceable® Flashing LED
Alert Big-Digit Alarm Timer
Easy on the eyes
Massive, 1-inch-high display permits viewing from
across the lab. Microcomputer chip permits setting
3 countdown times into memory. Program the three
most frequently used times and never set countdown
times again. Use any countdown time from 99
minutes, 59 seconds to 1 second. When zero is
reached, the timer starts counting up to show time
elapsed since alarming.
Traceable® ExtraExtra-Loud Timer
One-hundred-decibel screamer
User-friendly timer features include countdown,
stopwatch, time-out, and time-of-day clock. May
be heard in the noisiest plant or lab. One hundred
decibel alarm penetrates high noise areas clearly.
A breakthrough for easily hearing a countdown
alarm in high ambient noise conditions. Giant
display permits viewing anywhere and is ¾-inchhigh. Micro computer chip permits setting two
separate channels. Set any time from 99 hours, 59
minutes, 59 seconds to 1 second. When zero is
reached the timer starts counting up to show time
elapsed since alarming.
Perfect for high sound zones—
indoors and out
Both channels may be used simultaneously as
countdown, count-up, or in any combination of
count-up/down. Memories return the display to the
previously programmed countdown time at the touch
of a key. The extra-extra-loud, one-hundred-decibel
alarm sounds for 1 minute or may be silenced
manually. Large keys make it easy to set times and
change channels.
Traceable to NIST for accuracy
Quartz-crystal accuracy is 0.01%. To assure
accuracy an individually serial-numbered
Traceable® Certificate is provided from our
ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards
and Technology). It provides the accurate timing
assurance demanded by government regulations
and ISO 9000 requirements. Supplied: magnetic
back, flip-open stand, batteries. Size: 4 x 2½ x ½
inches. Weight: 5 ounces.
Description
Cat. No.
Traceable® Extra-Extra-Loud Timer
5014
Unique green light flashes every second when the
countdown time reaches 10 seconds. Red light flashes when zero has been reached and
the alarm is sounding. Alarm has three switch positions which allow setting to high decibel
for noisy areas, low for quiet environments, or off (muted) for silent, visual-flashing-LEDonly operation.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Supplied:
magnetic back, stand/spring-clip, opening for a lanyard, two alkaline batteries. Accuracy:
0.01%. Size: 3½ x 2¼ x 5/8 inches. Weight: 2½ ounces.
Description
Cat. No.
Traceable® Flashing LED Alert Big-Digit Alarm Timer
5013
Traceable® Flashing LED Alert
Big-Digit Dual Channel Timer
Allows simultaneous programming of two
different activities from 99 hours, 59 minutes, 59
seconds to 1 second. Resolution is 1 second;
accuracy is 0.01%. Each channel has a distinct
electronic alarm and visual indicator when zero is
reached. Alarm turns off automatically after one
minute or may be silenced manually.
Automatic or programmable memory
For repetitive timing, the microcomputer chip permits
ts
setting 2 countdown times into memory.
The memory recalls the last countdown time set.
Large 5/8 -inch LCD digits may be read from 18 feet.
Unique visual indication for each channel when counting down, green light flashes every
second once the countdown time reaches 10 seconds. Red light flashes when zero has
been reached and the alarm is sounding. Alarm has three positions which allow setting
to high decibel for noisy areas, low for quiet environments, or off (muted) for silent,
visual-flashing-LED-only operation. To assure accuracy an individually serial-numbered
Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Supplied: magnetic back, stand/spring-clip, opening for a
lanyard, two alkaline batteries. Size: 3½ x 3 x 5/8 inches. Weight: 3 ounces.
Description
Cat. No.
Traceable® Flashing LED Alert Big-Digit Dual Channel Timer
5017
45
Traceable® Talking Timer
Innovative countdown timer speaks in English. It counts down, talks, counts up, and tells time of day with
Traceable® precision. Never again glance at your timer. During countdown, voice reporting frequency is
every hour until 1 hour is reached, every 10 minutes until 10 minutes is reached, every minute until 1 minute
is reached, every 10 seconds until 10 seconds remain, then every second. Also announces elapsed time
since alarming.
Counts both up and down from 23 hours, 59 minutes, 59 seconds. Resolution is 1 second. Quartz-crystal
timing accuracy is 0.01%. To assure accuracy an individually serial-numbered Traceable ® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology).
Unique thru-zero feature allows counting down, alarming, and counting up. A time-out mode stops the timer
for off periods in both up and down timing. Provides repeat functions of countdown alarm timing. Set it to
count down for any time. When zero is reached, the timer alarms and begins to count down again from the
programmed time. Repeat cycle continues automatically until stopped. Extra-large ½-inch-high display and
vivid LCD digits continuously show the time remaining and are readable from 15 feet. In the clock mode
it announces time of day. Purchase several units; each may be set to a different alarm sound. Six distinct
alarm sounds indicate which test is completed. Supplied: magnetic back, flip-open stand/clip, opening for
lanyard, Traceable® Certificate. Size: 2½ x 3¼ x ½ inches. Weight: 2¼ ounces.
Description
Cat. No.
Traceable Talking Timer
5015
®
Traceable® Three-Line
Alarm Timer
Traceable®
Memory Timer
User-friendly timer
simultaneously displays three
different countdown/alarm
times. Three unique channels
may be started individually or
concurrently and programmed
to count down from 99 hours,
59 minutes, 59 seconds to 1
second. When zero is reached,
an alarm sounds, TIME’S UP is
displayed, and the timer begins
counting up.
Unique timer counts down with an
alarm and remembers the setting.
Program times from 24 hours to 1
minute in increments of 1 minute.
The bright, crisp, 1/3 -inch-high
LCD digits read in hours, minutes,
and seconds (seconds displayed
during the last 10 minutes).
Forever memory
Memories return the display to the previously programmed time.
Perfect unit to dedicate to a group of repetitive tests. May also
be used as three stopwatches or in any combination of up/down
timing. Display has a time-of-day clock.
To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology).
Quartz-crystal accuracy is 0.01%. For ease in reading, the digits
are 3/8 -inch-high. Supplied: magnetic back, stand, Traceable ®
Certificate, and battery. Chemical-resistant ABS plastic case is 2 x
3¼ x ½ inches. Weight: 3 ounces.
46
Unique memory returns the display to the previously programmed
time at the touch of a key. Set the timer once and it remembers
forever. Many users buy several, set the memory, and dedicate each
to a test, water bath, or instrument. Loud-beeping alarm sounds for
60 seconds or may be turned off manually. Three-key operation
makes it extremely simple to use.
Easy operation
Memory Timer’s quartz-crystal timing is accurate to 0.01%. To
assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology). Supplied:
clip/stand, and magnet, battery. Size: 23/8 -inch diameter by ½-inch.
Weight: 1 ounce.
Description
Cat. No.
Description
Cat. No.
Traceable® Three-Alarm Timer
5008
Traceable® Memory Timer
5030
Traceable® Nano™ Timer
At the press of a key, timer displays countdown alarm time/stopwatch (count-up) time, and time of
day (AM/PM and 24-hour format). Accuracy is 0.01%. High-decibel alarm sounds for 1 minute. Count
down or up to 23 hours, 59 minutes, 59 seconds on the two timing channels. For repetitive tests, the
unit’s two-channel memory automatically returns the display to the original programmed time. Threeeighths-inch-high digits may be read from 8 feet.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Supplied: battery, clip, stand, magnet. Size:
2½ x 2 x 7/8 inches. Weight: 2½ ounces.
Description
Cat. No.
Traceable® Nano™ Timer
5132
Traceable® Two-Memory Timer
Depend on Two-Memory Timer to deliver on-the-dot timing operations whether counting up or
down from 23 hours, 59 minutes, 59 seconds. Features timing accuracy of 0.01% and 1-second
resolution. It’s also a time-of-day clock with user-selectable AM/PM or 24-hour format. A smooth,
streamlined design and two-tone face make this an attractive companion for any lab bench. Bright
LCD digits are 3/8 -inch-high for easy viewing.
Times two tests at once
To perform two tests at once, both countdown timing channels may be started simultaneously.
As each countdown time ends, a unique alarm sounds, and TIME’S UP flashes on the display. At
zero, the display will begin counting up.
Take advantage of Timer’s memory feature to perform countless repetitive tests. Both countdown
timing channels may be set to recall a specific time. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology). Size: 2¾ x 21/8 x 7/8 inches. Weight: 17/8 ounces. Supplied: magnet, flip-open
stand/clip, batteries.
Description
Cat. No.
Traceable Two-Memory Timer
5006
®
Traceable® Advanced Memory Timer
Timer remembers the last time set, counts down, alarms, and counts up. Use it to count down/up
from 24 hours to 1 second in increments of 1 second. One of the most versatile timers for the lab.
The clock channel features time of day to the second with AM/PM indicators.
Timer signals duration of virtually every lab test, including drying, incubating, heating, and cooling
times. Unit pays for itself by saving just one missed test result. The perfect unit to dedicate to a
specific test or instrument. Remarkable memory returns the display to the previously programmed
countdown time at the touch of a key and recalls hours, minutes, and seconds. Unique thru-zero
feature allows counting down, alarming, and counting up. A time-out mode stops the timer for off
periods in both up and down timing.
The loud beeping alarm may be turned off manually or is silenced automatically after 1 minute. Visual alarm displays TIMES UP. Digits are
1/
®
3 -inch-high for ease in viewing. Quartz-crystal design is accurate to 0.01%. To assure accuracy an individually serial-numbered Traceable
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology). Handsome case is made of chemical-resistant ABS plastic. Supplied: magnet, flip-open
stand/clip, replaceable battery. Size: 2¼ x 2¼ x ½-inch size. Weight: 1½ ounces.
Description
Cat. No.
Traceable Advanced Memory Timer
5035
®
47
Traceable® Jumbo Timer
Allows simultaneous programming of two different activities from 24 hours to 1 second.
Resolution is 1 second; accuracy is 0.01%. Each channel has a distinct electronic alarm
and display indicator when zero is reached. The alarm may be turned off or it is silenced
automatically after 1 minute.
For repetitive timing, a memory recalls the last countdown time set. A second display mode
shows time of day and a stopwatch (for count-up timing). Jumbo, 1-inch-high LCD digits may be
read from 30 feet. Use it flat, in the sit-up position, or wall-mount with the supplied bracket. Size:
3¾ x 5½ x ½ inches. Weight: 5 ounces.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology).
Description
Cat. No.
Traceable® Jumbo Timer (Black)
5022
Traceable® Jumbo Timer (White)
5023
Traceable® 100-Hour
Mini-Alarm Timer/Stopwatch
Versatile timer incorporates all lab timing
Memory
Traceable® Alarm Timer/Stopwatch
Numbered keys make it a breeze to set time
Remarkable timer counts down with an alarm and counts up with
a time-out feature. Program it to count down from 99 minutes, 99
seconds to zero in any second increment. In the stopwatch mode,
the unit counts up to 59 minutes, 59 seconds, and automatically rolls
over to zero and continues timing.
Large, 3/8 -inch-high display and vivid LCD digits continuously
show time and are readable from 8 feet. Loud, high-decibel alarm
may be turned off manually or is automatically silenced after
1 minute. Individually numbered keys make setting time easy.
Timer is accurate to 0.01%. To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of
Standards and Technology). Supplied: magnet, flip-open stand/
clip, battery, opening for lanyard. Size: 2½ x 2¼ x ½ inches.
Weight: 1½ ounces.
Description
Traceable Alarm/Stopwatch Timer
®
48
Counts down with an alarm
and may be set to count
up and alarm. It also has a
memory. Set it once, press
recall, and start counting down
from the memory time. In the
stopwatch mode it counts up
from 1 second to 99 hours, 59
minutes, 59 seconds.
Countdown or
count-up alarm
In the alarm mode it may be programmed to count down or up and
alarm at any time from 1 second to 99 hours, 59 minutes, 59 seconds.
Accuracy is 0.01%. The display shows the time remaining to alarm
or elapsed time since alarming. To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and
Technology). Individually numbered keys make setting time fast and
easy. Extra-large, 3/8 -inch-high LCD digits are readable from 8 feet.
Extra-loud, high-decibel alarm is automatically silenced after 1 minute
or may be turned off manually. TIME IS UP message is displayed when
set time is reached. Unique thru-zero feature shows time elapsed since
the alarm has sounded. Also shows time of day.
Supplied: magnetic back, flip-open stand/clip, opening for lanyard.
Size: 2¾ x 2¾ x ½ inches. Weight: 1½ ounces.
Cat. No.
Description
Cat. No.
5020
Traceable 100-Hour Mini-Alarm Timer/Stopwatch
5021
®
Traceable® Double Display Timer
Timer allows simultaneous programming of two different activities from 20 hours to 1 second.
Resolution is 1 second; accuracy is 0.01%. Each channel has a distinct electronic alarm and
display indicator when zero is reached. Timer automatically counts up from zero to indicate time
since alarming. The alarm may be turned off or is silenced automatically after 1 minute.
For repetitive timing, a memory recalls a set time. A second display mode shows the time of day
and a stopwatch. Large ½-inch-high digits may be read from ten feet. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology).
Use it flat or in sit-up position. ABS impact-resistant case: 3 x 2½ x ½ inches. Weight: 3 ounces.
Supplied: clip, magnet, Traceable® Certificate, battery.
Description
Cat. No.
Traceable Double-Display Timer
5127
®
Traceable® Lab-Top Timer
Lab-Top Timer is built expressly for bench use. LCD screen is
designed for viewing at any angle. Versatile timing modes, extralarge keys, make this unit ideal for the lab.
Counts down from 24 hours to 1 second, in second increments, with
an accuracy of 0.01%. Special memory chip allows programming an
instant replay repeat time which appears on the display at the touch
of a key. Memory time is locked in until changed.
Unit features count-up mode and time-of-day clock. To assure
accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology). Supplied:
Traceable ® Certificate, battery. Size: 3¼ x 3¼ x 1¾ inches.
Weight: 4 ounces.
Description
Traceable Lab-Top Timer
®
Traceable® 99M/59S Timer
Timer counts down from 99 minutes, 59 seconds in second increments
with 3-key ease and big-digit visibility. Automatic memory resets the
display to the last programmed time—ideal for repetitive tests.
Quartz-crystal timing accuracy is 0.01%. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of
Standards and Technology).
Three-quarter-inch-high digits are readable from 20 feet. Alarm sounds
for 30 seconds. Size: 2½ x 2½ x ½ inches. Weight: 2 ounces. Supplied:
battery, magnet, stand/clip, Traceable ® Certificate.
Cat. No.
Description
Cat. No.
5007
Traceable 99M/59S Timer
5028
®
49
Traceable®
Fingertip Timer
Easy-to-use timer has a repeat
memory function for repetitive tests.
Three-key operation can be learned
in less than 10 seconds. Everyone in
the lab will enjoy using this always-atyour-fingertips timer. May be placed
on incubators, refrigerators, and ovens
with the magnet on the back.
Traceable® Triple-Purpose Timer
At the press of a key, big-digit timer displays countdown
alarm time, stopwatch (count-up) time, or time of day (AM/PM
and 24-hour format). Accuracy is 0.01%. Full keyboard (0-9
keys) makes entering times exceptionally fast. High-decibel
alarm sounds for 1 minute. Count down or up to 9 hours, 59
minutes, 59 seconds.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards
and Technology). For repetitive tests, the unit’s memory
automatically returns the display to the original programmed
time. Three-quarter-inch-high digits may be read from 20
feet. Supplied: battery, magnet. Size: 3 x 2½ x 1 inches.
Weight: 2½ ounces.
Description
Cat. No.
Traceable Triple-Purpose Timer
5027
®
Counts down from 99 minutes, 59
seconds in 1-second increments.
Accuracy is 0.01%. Dedicate this unit
to a specific test. Memory retains last
programmed time, eliminating the
need to re-enter test times. Alarm
may be silenced manually or turns off
automatically after 30 seconds.
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Size: 113/16 x 3½ x ½ inches. Weight: 1¼ ounce.
Supplied: battery, Traceable® Certificate, magnet, and Velcro®.
Description
Cat. No.
Traceable Fingertip Timer
5042
®
Traceable® Instant-Recall Memory Timer
Input a time and the instant memory always returns the display to the programmed
time. This is the ideal timer to dedicate to a routine tests. Bright, extra-large, 5/8 -inchhigh digits count down at any set time from 99 minutes 59 seconds to zero. At zero a
loud 30-second alarm sounds.
Designed specifically for routine tests, quality control requirements, and repetitive
analysis, it is the lab workhorse. The unique memory feature allows devoting timer to
one piece of laboratory equipment such as a water bath, oven, stirrer, or incubator.
Accuracy is 0.01%. Replaceable battery powers the timer for three years of nominal
use. To assure accuracy an individually serial-numbered Traceable ® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and
Technology). Magnetic back allows placing timer on metal surfaces. Suppled: stand,
spring fastener clip. Size: 2½ x 2¼ x ¾ inches. Weight: 2 ounces.
50
Description
Cat. No.
Traceable® Instant-Recall Memory Timer
5122
Traceable® GIANT-DIGIT™ Countdown Timer
View giant size digits on your timer from across the lab
Visible from shelves, in hoods, or perched on instruments. Giant-Digits™ with 11/3 -inch digit
height are viewable from 40 feet. Counts down and alarms on single channel for easy use,
and counts up during alarming indicating elapsed time since alarming. Three-key intuitive
operation eliminates reading instructions. GIANT-DIGIT™ timer has Automatic Bounceback™
Memory for repetitive timing. Timing range is 99 minutes and 59 seconds. Resolution is 1
second. Accuracy is 0.01%.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and Technology). Supplied: Traceable ®
Certificate, bench stand, magnetic back. Size: 31/3 x 3 x ½-inch. Weight: 2¾ ounces.
Description
Cat. No.
Traceable® GIANT-DIGIT™ Countdown Timer
5011
Traceable® QC Timer
Ideal QC (quality control) countdown and alarm timer combines easy, 3-key operation with giant-size
digits. Learn its operation in less than 10 seconds without ever reading the instructions. Quartzcrystal timing accuracy is 0.01%. To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and Technology).
Documentation provides the accurate timing assurance demanded by government regulations, ISO
9000 requirements, and QC needs.
Times may be set up to 20 hours in any one-minute increment. At zero, a 1-minute alarm sounds.
Three-quarter-inch-high digits are readable from 20 feet. Size: 3½ x 2 x ½ inches. Weight: 2 ounces.
Supplied: battery, magnet/clip.
Description
Cat. No.
Traceable QC Timer
5026
®
Traceable® Visual Alarm Timer (9999M)
Timer counts down from 9999 minutes in minute increments and has a countdown
resolution of 1 second for times under 99 minutes. With the flip of a switch, select either
an audible alarm, or bright flashing LED visual alarm. Automatic memory resets the
display to the last programmed time—ideal for repetitive tests. Thru-zero feature allows
counting down, alarming, then counting up. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology).
Three-eighths inch high digits are readable from 10 feet. Size: 3 x 2¼ x ¾ inches.
Weight: 3 ounces. Supplied with two batteries, an integrated magnet, stand, and clip.
Description
Cat. No.
Traceable Visual Alarm Timer (9999M)
5133
®
51
Traceable® Clip-It™ Timer
Clip-It™ Timer counts down, alarms, and functions as a stopwatch
The handiest timer ever designed clips to your lab coat, belt, notebook, clipboard, or anywhere.
You’ll never lose your own personal timer.
Six-digit LCD shows time remaining in hours, minutes, and seconds
Program it in the countdown mode, in 1 second increments, from 100 hours to 1 second.
At zero, a loud-beeping alarm sounds for 60 seconds or may be silenced manually. In the
stopwatch mode, it times from 1 second to 99 hours and then repeats. Also has a time-out
feature in both up and down counting.
Clip-It™ Timer is the perfect reminder
Notifies you when to read a color change, remove a sample from an oven, or go to a meeting. Big-digit, 1/3 -inch-high display is easy to read.
Five-key operation is quick and intuitive (no need to ever read the instructions). Quartz-crystal accuracy is 0.005%. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and Technology). Clip-It™ Timer has a magnet and silver-oxide
battery. Size: 2 x 1½ x ¾ inches. Weight: ½ ounce. Patented.
Description
Cat. No.
Traceable Clip-It Timer
®
™
5046
Traceable® Water-Resistant, Flashing Timer
Splash-proof, water-resistant timer is ideal for wet labs, wash-down areas, plants,
and field use
Times from 99 minutes, 59 seconds to zero with 1 second resolution. When zero is reached a bright red
LED flashes as a visual sign and an audible alarm sounds for one minute.
Unit also features infinite timeouts. Accuracy is 0.01%. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and
Technology). Supplied: lanyard, suction cup, magnet, Velcro®, silver-oxide battery. Size: 3 inches
diameter x ½-inch. Weight: 1½ ounce.
Description
Cat. No.
Traceable Water-Resistant, Flashing Timer
5036
®
Traceable® Tie Timer
Wear this countdown timer
Know at a glance the time remaining with this timer on a lanyard. Extraordinarily lightweight, it’s less than one
ounce. Digits (½-inch-high) are readable even with your glasses off. Program it to count down and alarm from 24
hours to 1 second. Resolution is 1 second and accuracy is 0.01%. Touch-of-a-key operation permits instant-replay
timing for repetitive testing. Memory never changes until you reprogram it. This feature is a real time-saver.
Also has a stopwatch (count-up) and time-of-day display. To assure accuracy an individually serial-numbered
Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied: Traceable ®
Certificate, 1-year battery. Size: 11/8 -inch dia. x 27/16 -inch length.
52
Description
Cat. No.
Traceable® Tie Timer
5043
Traceable®
Pocket Timer
Traceable®
Digital Timer Plus
Four-digit LCD always shows the time
remaining in hours and minutes. Program
it in 1-minute increments from 20 hours to
1 minute. At zero, a beeping alarm sounds
for 60 seconds or may be silenced manually.
In the stopwatch mode, it times from 1 second
to 20 minutes and then rolls over. Also has a
timeout feature in both up and down counting.
Costs so little, everybody
deserves one
The handiest timer ever designed
clips to your lab coat, belt, notebook,
clipboard, or anywhere. You’ll never
lose your own personal timer.
Six-digit LCD shows time remaining in hours,
minutes, seconds
Program it in the countdown mode, in 1 second increments, from
100 hours to 1 second. At zero, a loud-beeping alarm sounds for
60 seconds or may be silenced manually. In the stopwatch mode,
it times from 1 second to 99 hours and then repeats. Accuracy is
0.005%. Also has a time-out feature in both up and down counting.
Digital Timer Plus™ is the perfect reminder
Notifies you when to read a color change, remove a sample from
an oven, or go to a meeting. Big-digit, 1/ 3 -inch-high display is easy
to read. Five-key operation is quick and intuitive (no need to ever
read the instructions). To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and
Technology). Supplied: key-chain, magnet, battery. Size: 2 x 1½ x
¾ inches. Weight: ½ ounce. Patented.
Description
Cat. No.
Traceable® Digital Timer Plus™
5045
Digits are 1/3 -inch-high for ease in viewing. Three-key operation is fast.
Resolution is 1 minute and quartz-crystal accuracy is 0.01%. To assure
accuracy an individually serial-numbered Traceable® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute
of Standards and Technology). Timer has a rugged, chemical-resistant
ABS case. Supplied: key-chain, battery. Size: 2 x 11/8 x 3/8 inches. Weight:
½ ounce.
Description
Cat. No.
Traceable® Pocket Timer
1060
Traceable®
Key-Chain Timer
Unique timer is easy to use
Counts down, alarms, and functions as
a stopwatch. One of the handiest timers
ever designed—holds your keys or hooks
onto your lab coat buttonhole.
Traceable® Touch Timer
Four-digit LCD may be programmed to
count down and alarm from 19 hours,
59 minutes to 1 minute in any minute
increment. Two-key operation makes it
extremely easy to use.
Four-digit LCD always shows time remaining in hours and minutes.
Program it in the countdown mode in minute increments from 20
hours to 1 minute. When zero is reached, an alarm sounds for 60
seconds, or it may be silenced manually. In the stopwatch mode,
it times from 1 second to 20 minutes and then repeats itself. Also
has a time-out feature in both up and down counting.
Loud-beeping alarm may be silenced
manually or turns off automatically after 20
seconds. To assure accuracy an individually
serial-numbered Traceable® Certificate is
provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates
traceability to standards provided by
NIST (National Institute of Standards
and Technology).
Handy, postage stamp size designed to be used anywhere. Serves
as the ideal lightweight reminder. Accuracy is 0.01%. Size: 1 x 1¾ x ¼
inches. Weight: ½ ounce.
Description
Traceable Touch Timer
®
Big-digit, 1/3 -inch-high display is easy to read. Three-key
operation is fast and intuitive. Designed for rugged use. Quartzcrystal timing accuracy is 0.01%. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Key-Chain Timer has a
rugged, chemical-resistant ABS case. Supplied: battery. Size: 2 x
1½ x ¾ inches. Weight: ¾ ounce.
Cat. No.
Description
Cat. No.
5047
Traceable Key-Chain Timer
5041
®
53
Eight-Channel Alarm Timer
The only timer manufactured with a continuously-adjustable alarm-volume control. Can
be set from whisper-low at the lab bench to ear-piercingly loud for noisy plant areas.
Alarms may be set to sound continuously until turned off manually or set to turn off
automatically in 7 seconds or 1 minute.
Eight channels
Three channels count down—each with a memory (memory allows automatic return to
the previously programmed time at the press of a key). One channel counts down, and
when zero is reached, alarms and starts counting up. The stopwatch channel counts
up and alarms at any preset time. The 2 repeat channels automatically alarm at any
programmed time interval (e.g., set it to continually sound an alarm every 37 min).
100-hour timing capacity
Clock channel displays time of day in AM/PM or 24-hour time. Each timing channel
has a timing capacity of 99 hours, 59 minutes, 59 seconds. Extra-large, easy-to-read,
headline-size, ½-inch-high LED digits are bright and sharp. Display can be read from
25 feet away. Housed in an ABS plastic case. Size: 6½ x 4¼ x 3½ inches. Weight: 16
ounces. Unit operates on 115 VAC/60 Hz.
Description
Cat. No.
Eight-Channel Alarm Timer
5005
Compact Timer
Set this ruggedly-built, mechanical compact timer from 1 to 120 minutes. A loud, 5-second alarm signals elapsed time for all lab tests. Moving pointer always shows time remaining to zero. High-impact
ABS plastic construction makes it resistant to lab chemicals and virtually indestructible. The speedread dial is graduated with oversized markings for easy reading. Selecting time automatically winds
the timer. May be viewed from above or stands upright on the lab bench. Powerful spring ensures
99% accuracy. Size: 2¾ x 2¾ x 2 inches. Weight: just 33/8 ounces.
Description
Cat. No.
Compact Timer
1004
660-Minute Interval Timer
IInterval Timer is adjustable
A
Adjustable
from 0 to 60 minutes in 1-minute increments. Setting pointer to desired interval
winds the time automatically. Bell sounds at end of cycle. Indicating pointer always shows
w
eexact time remaining on easy-to-read dial. Stands on lab bench. Case is chemical resistant.
S
Size: 3¾ x 3¾ x 2 inches.
Description
Cat. No.
60-Minute Interval Timer
1062
Quick Timer™ & SX™ Timer
SX-Timer™ and Quick-Timer™ are adjustable from 1 to 60 minutes in 1-minute increments.
Turning the pointer to the desired countdown setting automatically winds the timers. Indicating
pointer always shows exact time remaining. Loud five-second alarm sounds at zero. Easy-to-read,
and use. Case is chemical resistant ABS plastic. Supplied: lanyard, key-chain.
54
Description
Cat. No.
SX-Timer™ /pk 3 (translucent blue/white, dia. 2¼ x 1 inches, weight 2¼ oz.) (pictured left)
1093
Quick-Timer™ /pk 3 (blue/white, with magnetic back, dia. 2½ x 1 inches, weight is 3 oz.) (pictured right)
1092
Traceable® Jumbo-Digit Compact RadioControlled Wall Clock
Jumbo sized 3¾ inch clock digits are readable from up to 100 feet. Compact case
measures only 9 inches wide by 5¾ inches high. Radio signal from NIST’s Colorado
atomic clock automatically sets correct date/time. Design allows mounting on any
wall or standing on any work surface. Calendar displays month/date and day of the
week. Thermometer displays ambient temperature in °F/°C. Clock has 12 or 24hour time-of-day display. Resolution: 1 second. Accuracy: 1/10,000 second when
receiving radio signal, otherwise 0.01%. Temperature range: 23 to 122°F (–5 to
50°C). Resolution: 0.1°. Accuracy: ±1°C.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA. It
indicates traceability, for time only, to standards provided by NIST (National
Institute of Standards and Technology). High-impact, chemical resistant case
size: 9 x 5 x 1¼ inches. Weight: 15 ounces. Supplied: wall mount, bench stand,
batteries, and Traceable® Certificate.
Description
Cat. No.
Traceable Jumbo-Digit Compact Radio-Controlled Wall Clock
1080
®
Traceable® GIANT-DIGITS™ Radio Atomic Clocks/Humidity/Temperature
View giant-size digits from anywhere. Never set these clocks, they
automatically adjust for daylight saving, leap year, and even the earth’s wobble
in leap seconds. Maintains better than 1-second accuracy for 25,000 years.
Radio signal from NIST’s Colorado atomic clock automatically sets correct
time/date.
Giant-Digits™ (4¾ inch digit height for 1087 model viewable from 200 feet), (2¼
inches digit height for 1088 model).
Desk-stand and wall-mount supplied. Simultaneously displays both ambient
and remote °F/°C temperatures. Remote module may be placed outdoors, in
store rooms, or anywhere up to 100 feet away.
Cat. No. 1087
Resolution is 1 second. Accuracy is 1/10,000 of a second. Temperature range
is 23 to 122°F (–5 to 50°C). Resolution is 0.1° with an accuracy of ±1°C. To
assure accuracy an individually serial-numbered Traceable ® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It
indicates traceability, for time only, to standards provided by NIST (National
Institute of Standards and Technology).
Description
Traceable GIANT-DIGITS™ Radio Atomic
Clock with Ambient and Remote Temperature
Cat. No.
®
Size: 16½ x 10½ x 1¾ inches. Weight: 3¼ lbs. Batteries and remote temperature module
supplied. Shows date and day, 12/24 hour time format. (upper picture)
Cat. No. 1088
Traceable® GIANT-DIGITS™ Radio Atomic
Clock with Ambient and Remote Temperature and Humidity
Size: 11½ x 7¾ x 1 inches. Weight: 11/8 lbs. Batteries, remote temperature/humidity module
supplied. RH Range: 10 to 90% (ambient and remote) with a resolution: 1% RH. (lower
picture)
1087
1088
55
Workstation Traceable® Radio-Signal Atomic Clock
World’s most accurate clock for your workstation
Traceable® Radio Controlled Atomic Clock is accurate to 1/10,000 of a second. Resolution is 1 second. Receives a radio signal directly from the National Institute of Standards and Technology atomic clock (accurate
to one hundred billionth of a second) in Boulder, Colorado. Ideal for recording the receiving of samples, noting
the exact time an event occurred, supporting documentation, providing a standard for a location’s other clocks,,
maintaining ISO 9000 certification, and for the myriad of occasions when knowing the exact time is important.
Radio signal automatically adjusts for AM/PM, 24-hour time, day/date, daylight savings time, leap year, and
leap seconds (earth rotation wobble corrections). To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Backlighting permits viewing in total darkness. Alarm volume increases until turned off. Temperature range is from 32 to 158°F and 0 to
50°C with a resolution 0.1° and an accuracy of ±1°C. LCD digits, ½-inch-high, are readable from over 15 feet. Battery operation eliminates
electrical outage concerns and runs continuously for 1 year. Size: 2½ x 3 x 1½ inches. Weight: 4 ounces.
Description
Cat. No.
Workstation Traceable® Radio-Signal Atomic Clock
5125
Traceable® Atomic Clock
Super accurate clock the one that replaces all others
Traceable® Clock is accurate to 1/9,000 of a second at all times. Receives a signal directly from the world’s
d’s
most accurate timekeeper, the National Institute of Standards and Technology. NIST’s atomic clock is
accurate to one hundred billionth of a second.
Corrects for Daylight Saving Time
NIST radio signal automatically sets and precisely displays time-of-day to the second, AM/PM, month,
date, day of the week, and ambient temperature. It automatically adjusts the clock for daylight saving
time, leap year, and leap seconds (earth rotation wobble corrections). To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability, for time only, to standards provided by NIST (National Institute of
Standards and Technology).
Display includes a signal reception strength indicator and a U.S. map showing the user-selected time zone. Backlighting permits viewing
in total darkness. Traceable® Clock has a settable alarm. For noisy areas, the alarm increases in intensity and volume until turned off. LCD
digits, 1¼-inch-high, readable from 45 feet. Size: 4½ x 4¼ x 2½ inches. Weight: 6 ounces.
Description
Cat. No.
Traceable Atomic Clock
5003
®
Traceable® Digital Radio Atomic Wall Clock
Traceable® Digital Clock has 2¼ inch-high jumbo digits
Accuracy is 1/10,000 of a second. Radio signal from NIST in Colorado automatically
adjusts clock to precise time, daylight savings, leap year, and leap seconds (earth
rotation wobble corrections). Display shows AM/PM or 24-hour time, month, date,
day of the week, and ambient temperature (32 to 122°F and 0 to 50°C with 0.1°
resolution). Large digits are 2¼ inches high for viewing from 75 feet.
To assure accuracy an individually serial-numbered Traceable ® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability, for time only, to standards provided by NIST (National Institute of
Standards and Technology). Supplied: wall-mount/screw, batteries. Size: 8¾ x 9¼ x
¾ inches. Weight: 11/8 pounds.
Description
Cat. No.
Traceable Digital Radio Atomic Wall Clock
1076
®
56
Traceable® Analog Radio Atomic Wall Clock
Traceable® Clock automatically sets itself and is accurate to 1/10,000 of a second. Clock
receives a radio signal directly from NIST’s atomic clock in Boulder, Colorado. It adjusts for
daylight saving time and leap seconds (earth rotation wobble corrections). Bright second
sweep hand is highly visible.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Supplied: wallmount/screw, battery. Diameter: 12 inches, depth: 1¼ inches. Weight: 13/8 lbs.
Description
Cat. No.
Traceable® Analog Radio-Signal Atomic Wall Clock
1077
Traceable® Stick-It™ Mini-Clock
Traceable® Stick-It™ Mini-Clock is perfect for each work area.
Bright hands and white sweeping second hand are easy to read.
Rugged gleaming metal case is O-ring sealed making it waterresistant/dustproof. Flat bottom permits standing on shelf, desk,
or bench. Precise quartz-crystal accuracy is 0.013%.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and
Technology). No winding is required. Size: 1½ inch diameter
x 0.3 inch depth. Weight: 1 ounce. Supplied: Velcro®, doublebacked tape, battery. Patented.
Description
Cat. No.
Traceable Stick-It Mini-Clock
®
Actual Size
™
1003
Traceable® Wall Clock
Tell time of day to the second with this attractive, 12-inch diameter wall clock. A worthy
addition to every lab. To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology).
Quartz-crystal timing accuracy is 0.01%. Supplied: water/dust resistant sealed case,
bright sweep second hand, Traceable® Certificate, battery, wall-mount/screw. Size: 12inch diameter. Weight: 1 pound.
Description
Cat. No.
Traceable Wall Clock
1067
®
57
Traceable® Calendar Thermometer Clock
This clock delivers time, room temperature, and calendar. Temperature displays degrees
C or F to 0.5° (23 to 122°F and –5 to 50°C). Extra-large LCD digits are 21/8 inches high to
provide perfect visibility. Time can be shown in AM/PM or 24-hour time. Calendar shows
month, date, and day of the week.
Clock’s quartz-crystal timing accuracy is 0.01%. To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability, for time only, to standards
provided by NIST (National Institute of Standards and Technology). Clock has a stylish,
two-tone color face and a slim silhouette (only 1-inch depth). Size: 9¼ x 10 inches.
Weight: 19 ounces. Supplied: two batteries, wall-mount/screw, Traceable ® Certificate.
Description
Cat. No.
Traceable Calendar Thermometer Clock
1072
®
Traceable® Thermometer/Clock/Humidity Monitor
Sits on the bench or desk
Unique unit simultaneously displays time of day, temperature, and humidity. Clock displays AM/PM or
24-hour military time to the exact minute with 0.01% accuracy. Noting changes is easy with the triple
display. Internal sensors make it ideal for use in hoods, storerooms, clean rooms, incubators, drying
chambers, and environmental cabinets. Temperature range is 32.0 to 122.0°F and 0.0 to 50.0°C.
Resolution is 0.1° and accuracy is ±1°C. Relative humidity range is 20 to 90%. Resolution is 1% RH
and accuracy is ±5% RH mid-range, otherwise ±8%. At the touch of a key, memory recalls highest
and lowest temperature and humidity readings. Permits monitoring conditions overnight, on weekends,
or any time period.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology). Supplied: Traceable® Certificate, 1-year battery, builtin stand, wall-mount/screw. Size: 4¼ x 2¼ x ½ inches. Weight: 2½ ounces.
Description
Cat. No.
Traceable® Thermometer/Clock/Humidity Monitor
4040
Traceable® Clock/Thermometer/Humidity
Tr
At a glance tell time, temperature, and humidity in the lab. Clock with 0.01% quartzcrystal timing accuracy. Contrasting dials display temperature from –20 to 55°C and
cry
10 to 130°F and humidity from 0 to 100%.
Sw
Sweeping
second hand provides superior visibility. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided from our ISO 17025
ind
calibration laboratory accredited by A2LA. It indicates traceability, for time only,
cal
to sstandards provided by NIST (National Institute of Standards and Technology).
Supplied: battery, wall-mount/screw. Diameter: 12½ inches. Weight: 1 pound.
Su
Description
Cat. No.
Traceable Clock/Thermometer/Humidity
1071
®
58
Traceable® Indoor/Outdoor Clock
Clock tells time of day to the second and shows temperatures from –4 to 104°F and –20 to 40°C with
±1.5°C accuracy. O-ring sealed waterproof/dustproof ABS plastic impact-resistant case makes it ideal for
wash-down areas, outdoors, and harsh environments. Quartz-crystal timing accuracy is 0.01%. Modern
style clock design and bright blue sweep second hand may be read at fifteen feet.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability, for time only, to standards
provided by NIST (National Institute of Standards and Technology). Case diameter: 7 inches, dial
diameter: 5 inches. Weight: 12 ounces. Supplied: battery, wall-mount/screw.
Description
Cat. No.
Traceable® Indoor/Outdoor Clock
1078
Traceable® Clock/Thermometer/Humidity
Ultra-modern design is high-tech in appearance. Shows crisp readable dials with a low profile
case. It’s the prestige clock to place on any wall. At twenty feet, read time, temperature, and
humidity. Triple display shows precise quartz-crystal timing with 0.01% accuracy, temperatures
from –34 to 116°F and –37 to 47°C with ±1.5°C accuracy, and relative humidity from 8 to 92%
with ±5% accuracy.
Bright orange, sweeping second hand provides superior visibility. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability, for time only, to standards provided
by NIST (National Institute of Standards and Technology). Low-profile slim design ABS plastic
impact-resistant case: 12½ x 11 x 1-inch. Weight: 15/8 pounds. Clock dial diameter: 9 inches;
temperature and humidity dial diameters: 3 inches. Supplied: battery, wall-mount/screw.
Description
Cat. No.
Traceable Clock/Thermometer/Humidity
1079
®
STOPWATCH CHART
Cat. No.
Page No.
Traceable® Certificate
Supplied
Accuracy
Timing
Capacity
Resolution
Timing Functions
(see page 60)
Features
1052
60
Yes
0.00%
10 Hours
1/100 Second
A, B, C, D, E, F, G, H, I
300 memories
1051
60
Yes
0.00%
24 Hours
1/100 Second
A, B, C, D
Jumbo digits
1037
61
Yes
0.00%
24 Hours
1/100 Second
A, B, C, D
Extra-tough construction
1044
61
Yes
0.01%
24 Hours
1/100 Second
A, B, C, D
Extra-tough construction
1048
61
Yes
0.00%
10 Hours
1/100 Second
A, B, C, D, E, F, G, H, I
8 memories
1025
61
Yes
0.00%
10 Hours
1/100 Second
A, B, C, D, E, F, G, H, I
60 memories
1030
62
Yes
0.00%
10 Hours
1/100 Second
A, B, C, D, E
High accuracy
1035
62
Yes
0.01%
100 Hours
1/100 Second
A, B, C, D, E, F, H
Pre-programmed countdown
1047
62
Yes
0.00%
24 Hours
1/100 Second
A, B, C, D
Big digits
1031
63
Yes
0.00%
20 Hours
1/100 Second
A, B, C, D, E, F
Triple-display, decimal timing, and 500 memories
1042
63
Yes
0.01%
24 Hours
1/100 Second
A, B, C, D
Waterproof
1045
63
Yes
0.01%
24 Hours
1/100 Second
A, B, C, D
Water-and-shock resistant
1034
64
Yes
0.00%
10 Hours
1/100 Second
A, B, C, D, E
Dual display
1043
64
Yes
0.10%
24 Hours
1/100 Second
A, B, C, D
Disposable
1221
64
Yes
0.00%
10 Hours
1/1000 Second
A, B, C, D, E
Bench top
1021
65
Yes
0.00%
999 Hours
1/100 Second
A, B, C, D, E, H
12 different events
59
NINE UNIQUE TIMING FUNCTIONS
A.Single Action Timing: Pressing the start button begins
timing, a second press stops the clock
D. Cumulative Split: Freezes the display for partial
event times while the internal clock continues to run
and measure total elapsed time since starting the timer.
B. Time-out/Time-in: Records total elapsed time with
any number of “time-outs”. Permits stopping the timer
for “off” periods, holds the reading where stopped, and
starts again from that point.
F. Memories: Capture and store separate times and
display them while timing or after the event is over.
Never look away from a lab test–even to take notes.
G. Countdown I (repeat): An alarm sounds at zero,
program automatically repeats, counts down, and alarms
again. It continues this sequence until stopped.
E. Interval Split: Yields a readout of each individual
time increment of a connected series of events. Each
press of the button displays the time interval since the
previous press.
H. Countdown II: Allows setting unit to countdown. An
alarm sounds at zero.
C. Continuous Timing: Digits offer a continuous
display. When the maximum display is reached, digits
rollover to zero and automatically begin timing again.
Permits timing for hours, days, or weeks.
I. Sample Counter: Box on display shows sample
number for each split taken.
1, 2, 3, 4 . . .
Traceable® 300-Memory Stopwatch
Stopwatch times to 9 hours, 59 minutes, 59 seconds, 99 hundredths. Resolution is 1/100 of a second
and accuracy is 0.001%. Provides stopwatch functions: single-action, time-in/-out, continuous-timing,
cumulative-split, interval-split, 300-memories, and repetitive programmable countdown alarm times.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology).
Three-line display simultaneously shows running time, cumulative-split, and interval-split. Unit recalls
300-memories and displays sample numbers 1 through 300. Can recall memories both during and after
event timing. Interval split also shows longest, shortest, and average times. Provides repeat functions
of countdown alarm timing. Set it to count down at any time from 10 hours to 1 second. When zero is
reached, alarm sounds and unit begins to count down again from the programmed time. This repeat
cycle continues automatically until stopped. Display always shows running time remaining to zero and
cycles counted from 1 to 300. Functions also include: pacer, stroke, and speed calculations.
Water-resistant, O-ring-sealed, and shock-resistant ABS plastic case has non-skid rubber sides—ideal for lab and plant use. As a
chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM, date, and day of the week. It also has a time-of-day alarm.
Stopwatch is 3 x 2½ x 7/8 inches. Weight: 2½ ounces. Supplied: detachable clip, Velcro ®, Traceable® Certificate, battery, lanyard.
Description
Cat. No.
Traceable® 300-Memory Stopwatch
1052
Traceable® Jumbo-Digit Stopwatch
Traceable® Jumbo-Digit Stopwatch with handy clip
Large stopwatch digits, ½-inch high provide ease in reading. Times to 24 hours. Unit features singleaction, time-out, cumulative-split, and continuous timing. Timing resolution is 1/100 of a second for the
first 30 minutes. Unit continues timing to 23 hours, 59 minutes, 59 seconds with a 1-second resolution.
Accuracy is 0.001%. To assure accuracy an individually serial-numbered Traceable ® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Water-resistant, O-ringsealed, and shock-resistant ABS plastic case has non-slip rubber sides—ideal for lab and plant use. As
a chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM, date, and day of the week. It also has a time-of-day
alarm. Size: 3 x 2½ x 7/8 inches. Weight: 2½ ounces. Supplied: Velcro, Traceable® Certificate, battery, lanyard, clip.
60
Description
Cat. No.
Traceable® Jumbo-Digit Stopwatch
1051
Traceable® Stopwatch/Chronograph
Times to 24 hours
Workhorse LCD digital stopwatch reads times up to 24 hours. In the stopwatch mode, it provides singleaction, time-out, cumulative-split, and continuous timing. Resolution is 0.01 second. Accuracy is 0.001%
or 0.01%.
Chronograph
As a chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM, date, and day of
the week. Also has a time-of-day alarm. Extra-tough ABS plastic shockproof construction makes the unit
ideal for lab and plant use. To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Size: 23/8 -inch diameter x
5
/8 -inch. Weight: 1½ ounces. Supplied: battery, Traceable® Certificate, lanyard.
Description
Accuracy
Cat. No.
Traceable Ultra Stopwatch/ Chronograph
0.001%
1037
Traceable® Stopwatch/ Chronograph
0.01%
1044
®
™
Traceable® 60-Memory Stopwatch
Three-line display simultaneously shows running time, cumulative
split, and interval split. Sixty
memories recall all splits, display
sample numbers 1-60, and show
interval split longest, shortest, and
average times.
Stopwatch times to 9 hours,
59 minutes, 59 seconds, 99
hundredths. Accuracy is to 0.001%.
Provides stopwatch functions
of single action, time-in/-out,
continuous timing, cumulative split,
interval split, 60 memories, and
programmable timing.
Provides repeat functions of
countdown alarm timing. Set it to
count down at any time from 10
hours to 1 second. When zero is reached, the timer alarms
and begins to count down again from the programmed time.
Repeat cycle continues automatically until stopped.
To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
As a chronograph, the stopwatch displays time of day, date, and
day of the week. It also has a time-of-day alarm. Size: 21/8 x 25/8
x ¾ inches. Weight: 2 ounces. Supplied: battery, Traceable ®
Certificate, lanyard.
Description
Traceable 60-Memory Stopwatch
®
Traceable® Stopwatch/
Repeat Timer
Universal stopwatch
provides repeat function
of countdown alarm
timing. Set countdown
time from 10 hours to 1/10
of a second. When zero
is reached, timer alarms
and repeats countdown
from the programmed time.
Repeat cycle automatically
continues until stopped.
Display count box shows
how many times the cycle
has been repeated. LCD
screen continually displays
time remaining to zero.
The ideal stopwatch to dedicate to an analysis that must be
noted at routine intervals. Resolution is 0.01 second. Provides
stopwatch functions of single-action, time-in/-out, cumulativesplit, interval-split, eight memories, and continuous timing.
Accuracy is 0.001%.
To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards
provided by NIST (National Institute of Standards and
Technology). Supplied: battery, Traceable® Certificate, lanyard.
ABS plastic shockproof case is 23/8 x 23/8 x ½ inches. Weight: 1¾
ounces.
Cat. No.
Description
Cat. No.
1025
Traceable Stopwatch/Repeat Timer
1048
®
61
Traceable® Digital Stopwatch
T
P
Precise,
Traceable® timing for enzyme tests, viscosity measurements, animal studies, and other timed
lab
la tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on
the
t finest instrumentation. Engineered for ease of operation, accuracy, and reliability.
Traceable to NIST for accuracy
T
T assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
To
117025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Quartz-crystal design is accurate to 0.0005%—over
N
1100 times more accurate than other stopwatches.
Ten-hour timing
T
F
Functions
include single-action, time-out, interval-split, cumulative split, continuous roll-over timing,
aand countdown alarm timing. Resolution is 0.01 second. Times to 9 hours, 59 minutes, 59 seconds, and 99
hhundredths. Vivid, ½-inch-high LCD digits are ideal for viewing in lab and field. Water-resistant ABS plastic
ccase features tongue and groove craftsmanship and O-ring construction to seal out moisture, dust, and
ffumes. Size: 2½ x 3 x ¾ inches. Weight: 2½ ounces. Supplied: battery, Traceable ® Certificate, lanyard.
Description
Cat. No.
Traceable Digital Stopwatch
1030
®
Traceable® Big-Digit
Stopwatch/Chronograph
Traceable® Countdown Stopwatch
Unique stopwatch provides countdown and
alarm timing in pre-programmed increments
of 1, 2, 3, 5, 10, 12, 15, 20, 25, 30, 35, 40, 45,
50, 55, and 60 minutes. Display continually
shows running time remaining to zero. When
zero is reached, timer sounds an alarm for 5
seconds. Accuracy is 0.01%. Set it to count
down at any time from 99 hours to 1 second.
When zero is reached, the timer alarms
and begins to count down again from the
programmed time. Repeat cycle continues
automatically until stopped.
Digital stopwatch reads time up to
24 hours. Accuracy is 0.0035%.
Utility unit has complete stopwatch
functions and full chronograph
features. In the stopwatch mode it
provides single-action, time-out,
cumulative split, and continuous
timing. Resolution is to 0.01
second. To assure accuracy an
individually serial-numbered
Traceable® Certificate is provided
from our ISO 17025 calibration
laboratory accredited by A2LA. It
indicates traceability to standards
provided by NIST (National Institutee
of Standards and Technology).
The extra-large display is 3/8 -inch for easy reading.
Times to 29 minutes, 59 seconds, 99 hundredths, the unit
automatically goes into an expanded range and times up to 23
hours, 59 minutes, and 59 seconds. As a chronograph, the unit
displays time of day in hours, minutes, and seconds, AM/PM,
date, and day of the week. Also has a time-of-day alarm.
Extra-tough ABS plastic shockproof construction makes the
unit ideal for lab and plant use. Size: 23/8 x 5/8 inches. Weight: 1½
ounces. Supplied: battery, Traceable® Certificate, lanyard.
Description
Traceable Big-Digit Stopwatch/Chronograph
®
62
The ideal stopwatch to dedicate to an
analysis that must be noted at routine
intervals. Stopwatch mode times up to
10 hours with 1/100-second resolution. Functions include single-action,
time-in/-out, cumulative/interval-split, 8 recallable memories, and
continuous timing.
The dual display timer mode can be used in three ways: Two different
countdown times simultaneously, two independent countdown alarm timers,
and two independent count up timers. This unit also has a pacer. To assure
accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and
Technology). Extra-tough ABS plastic shockproof construction is perfect for
use in the lab or field. Diameter: 2½ inches, depth: 5/8 -inch. Weight: 1½ ounces.
Supplied: battery, Traceable® Certificate, lanyard.
Cat. No.
Description
Cat. No.
1047
Traceable® Countdown Stopwatch
1035
Traceable® Decimal Stopwatch
Precise, Traceable® timing for enzyme tests, viscosity measurements, animal studies, and all timed lab
tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on the finest
instrumentation. Engineered for ease of operation, accuracy, and reliability.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
ttee
of Standards and Technology). Quartz-crystal design is accurate to 0.0005%—over 100 times more accurate
than other stopwatches. Four timing formats/resolution are: hr/min/sec; 1/100 second; 1/1000 min; 1/100,000
hr. Maximum readouts are 19.999999 hours, 1199.999 minutes, 71999.99 seconds, or 19 hr/59 min/59 sec/99
hundredths. Stopwatch functions include single-action, time-out, interval-split, cumulative split, and continuous
roll-over timing. Times to 19 hours, 59 minutes, 59 seconds, and 99 hundredths. Triple display shows cumulative
splits, interval splits, and running time. Features 500 recallable memories displaying the lap, split, and running
time. Memory feature also displays the fastest, slowest, and average lap time. The unit displays time of day, date,,
day of the week and features a time-of-day alarm. Additional features include countdown alarm, countdown then
countup alarm, countdown repeat, pacer, and stroke.
Rugged, durable, water-resistant
Tough, water-resistant ABS plastic case features tongue and groove craftsmanship and O-ring construction to seal out moisture, dust, and
fumes. Size: 2½ x 3 x ¾ inches. Weight: 2½ ounces. Supplied: lanyard, Traceable ® Certificate.
Description
Cat. No.
Traceable® Decimal Stopwatch
1031
Traceable® Waterproof/Shockproof Stopwatch
General-purpose stopwatch times to 24 hours. Features include: single-action, time-out, cumulative-split, and
continuous timing. Timing resolution is 1/100 of a second for the first 30 minutes, then continues timing to 23
hours, 59 minutes, 59 seconds, with a 1-second resolution.
Waterproof to three atmospheres
O-ring-sealed and shock-proof ABS plastic case is ideal for lab and plant use. Unit is waterproof to three
atmospheres. Tactile-feel, click switches provide a positive action. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It
indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
As a chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM date, and day of the
week. Also has a time-of-day alarm. Accuracy is 0.01%. Digits are ¼-inch-high. Size: 21/8 x 23/8 x ½ inches.
Weight: 1 ounce. Supplied: battery, Traceable® Certificate, lanyard.
Description
Cat. No.
Traceable Waterproof/Shockproof Stopwatch
1042
®
Traceable® Water-/Shock-Resistant Stopwatch
General-purpose stopwatch times to 24 hours. Features include: single-action, time-out, cumulative-split, and
continuous timing. Timing resolution is 1/100 of a second for the first 30 minutes, then continues timing to 23
hours, 59 minutes, 59 seconds, with a 1-second resolution.
As a chronograph, the unit displays time of day in hours, minutes, and seconds, AM/PM, date, and day of the
week. Also has a time-of-day alarm. Tactile-feel, click switches provide a positive action. Accuracy is 0.01%.
Digits are ¼-inch-high.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Supplied: battery, lanyard. Size: 21/8 x 23/8 x ½ inches. Weight: 1 ounce.
Description
Cat. No.
Traceable® Water-/Shock-Resistant Stopwatch
1045
63
Traceable® Dual-Display Digital Stopwatch
Precise, Traceable ® timing for enzyme tests, viscosity measurements, animal studies, and all timed lab
tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on the
finest instrumentation. Engineered for ease of operation, accuracy, and reliability. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology).
Quartz-crystal accuracy
Quartz-crystal design is accurate to 0.0005%—over 100 times more accurate than other stopwatches.
Functions include single-action, time-out, interval-split, cumulative split, continuous roll-over timing, and
countdown alarm timing. Resolution is 0.01 second. Times to 9 hours, 59 minutes, 59 seconds, and 99
hundredths. Dual display shows cumulative and interval split. Features eight recallable memories, plus fastest
and slowest lap times. Timer provides repeat function of countdown alarm timing. Set countdown time from 10
hours to 1 second. When zero is reached, timer alarms and repeats countdown from the programmed time.
Display count box shows how many times the cycle has been repeated. LCD screen continually displays time
remaining to zero. Tough, water-resistant ABS plastic case features tongue-and-groove craftsmanship and O-ring construction to seal out
moisture, dust, and fumes. Size: 2½ x 3 x ¾ inches. Weight: 2½ ounces. Supplied: battery, Traceable ® Certificate, lanyard.
Description
Cat. No.
Traceable Dual-Display Digital Stopwatch
1034
®
Traceable® Digital Bench Top Timer
Traceable® Three-Key
Th
K Stopwatch
St
The first disposable stopwatch
Three-Key Stopwatch is so inexpensive that it’s the first
disposable stopwatch. Appropriate for easy-duty, occasionaluse needs. Wear it around your neck on the lanyard.
To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards
and Technology). Times to 24 hours with a resolution of 1/100
of a second for 30 minutes and 1 second thereafter. Functions
are single-action, time-out, cumulative-split, and continuous roll
over timing. It also displays time and date. Provides a sound
confirmation each time a key is pressed. Accuracy: 0.1%.
Supplied: Traceable® Certificate, battery, lanyard. Size: 21/8 -inch
diameter x 5/8 -inch. Weight: 7/8 ounce.
Unit features precise, quartz-crystal Traceable ® timing for enzyme
tests, viscosity measurements, animal studies, and all timed lab tests.
Accurate to 0.001% with resolution to 0.01 second. Engineered for ease of
operation, accuracy, and reliability.
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Portable design permits the unit to be moved
easily. Attractive, high-impact ABS plastic case is designed for hard
laboratory use. Supplied: battery, Traceable ® Certificate, three test leads.
Size: 4 x 4¼ x 1¾ inches. Weight: 7 ounces.
Description
Cat. No.
Description
Cat. No.
Traceable Three-Key Stopwatch
1043
Traceable Digital Bench Top Timer
1221
®
64
The perfect size—unit
ze unit has a large
large-screen
screen LCD and a small,
small lab-bench
lab bench
footprint. Times up from 0.01 second to 9 hours, 59 minutes, 59 seconds,
and 99 hundredths of a second. Switchable between cumulative and
interval-split, the unit also allows an infinite number of time-outs. Oversize
keys make it easy to use. Three 4mm sockets (and supplied test leads)
allow external triggering of the start/stop and split/lap/reset functions.
Digital display is ¾-inch-high and is readable from 20 feet.
®
Traceable® Bench Timer
Times from 0.001 second to 999 hours. Precise timing and an eight-digit, ½-inch-high, brightintensity LED display make it the choice for all industrial and biomedical tests.
Four timing modes
Reads in four different formats: 99 hours, 59 minutes, 59 seconds, 99 hundredths; 99999.999
seconds; 9999.9999 minutes; and 999.99999 hours. Ultra-high stability and sealed quartzcrystal provide precision timing immune to AC line fluctuations. If the power fails, a 9-volt
backup battery continues timing until power is restored. To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
of Standards and Technology). Fulfills ISO 9000 requirements. Reads to 0.001 second and is
accurate to 0.001%.
Twelve timing channels
Unit features four timing modes: single-action, time-in/-out, cumulative-split, and interval-split. Up to 12 different events may be timed
simultaneously. An audible up-alarm may be set to signal on each channel. The Bench Timer is constructed of high-impact ABS plastic designed
for hard laboratory use. Supplied: Traceable ® Certificate, battery. For use with 120 VAC. Size: 63/8 x 4¾ x 3½ inches. Weight: 1¼ pounds.
Description
Cat. No.
Traceable Bench Timer
1021
®
CONTROLLER CHART
Page No.
Traceable Certificate
Supplied
Accuracy
5057
66
Yes
0.01%
N/A
5058
66
Yes
0.01%
N/A
15
Continuously cycles equipment on/off for two different time periods
5050
66
Yes
0.01%
196/Week
15
Turns equipment on/off based on set time intervals
5055
67
No
N/A
96/Day
15
4 analog controlled outlets and 4 non-controlled outlets
5056
67
Yes
0.01%
84/Week
15
4 digital controlled outlets and 4 non-controlled outlets
5010
67
Yes
0.01%
1568/Week
15
Controller, timer/stopwatch and calculator
4130
68
Yes
±1°C
3/Day
15
Turns equipment on/off based on temperature
5090
68
Yes
0.01%
196/Week
15
Random on/off
4190
68
Yes
±5% RH
N/A
15
Turns equipment on/off based on humidity
5095
69
Yes
0.01%
196/Week
15
Turns equipment on/off based on a set countdown time
Cat. No.
®
Switching
Programs
Amps
15
Features
Counts up and turns equipment off
24-Hour/7-Day Controller
Automatic mechanical units turn on and off any piece of equipment. Use them to turn on
chemical, water, and air pumps as part of a sampling process. Automate testing, heating, mixing,
or even feeding of animals. Easy-to-set controllers are ready to use out of the box, program in
less than a minute, and plug into a wall outlet.
Index pin displays all time settings
Unique index pin memory permits programming unit to exact time requirements. Pins constantly
display all of the time settings. UL listing allows use with electrical equipment to 125 VAC, 15
amps, 1875 watts, and 1/ 3 horsepower. A single glance verifies an entire program. If a change is
necessary, it takes only a second to raise or lower a pin.
Simple, easy programming
Twenty-four-hour unit may be set in any number of 15-minute increments, 7-Day Controller in any number of 2-hour increments. Both
automatically repeat each cycle daily or weekly. Seven-day unit may be programmed to skip weekends or any days. Manual override, equipment
can be switched on/off immediately without unplugging or disturbing program. Rated to 15 amps. Size: 3¼ x 2¾ x 2 inches. Weight: 5 ounces.
Description
Cat. No.
24 Hour Dial Controller
5060
7-Day Dial Controller
5070
65
Traceable® Walkaway™ Count-up Controllerss
Model 1: Walkaway™ Turn-off Controller counts up and turns any piece of
equipment off at the end of a set time period. Programmable in three interval
settings: .01 second to 99.99 seconds; 1 minute to 99 minutes; or 1 hour to
99 hours.
Model 2: Walkaway™ Repeat Turn-on/Turn-off Controller counts up
and turns any piece of equipment on for a programmed time and off for a
different programmed time. Repeat feature automatically continues cycling
on and off programmed times until manually stopped. Programmable for
separate on and off timing periods in three interval settings: 1 second to 99
seconds; 1 minute to 99 minutes; and 1 hour to 99 hours.
Switch equipment on/off instantly with manual override
Controllers perform reproducible stirring, heating, or pumping times. Use for
timed shutdown or repeated on/off timing. A manual pause switch overrides
the program without disturbing it, and permits equipment to be switched off
instantly. Supplied internal nicad battery maintains programs in the event of a
power outage. Intuitive operation permits setting a program in less than five
seconds. Automatic operation allows walking away from the equipment.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory accredited by
A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
LED indicates status of attached equipment
Unit’s timing accuracy is 0.01%. Backlit LCD digit height is ½-inch. Three-pronged, grounded receptacle relay turns on/off apparatus to 120
VAC, 15 amps, 1800 watts, 1/3 horsepower. Red LED indicates the on/off status of attached equipment. High-impact ABS case: 6 x 2¾ x 3¼
inches. Weight: 12 ounces.
Description
Cat. No.
Traceable Walkaway™ Turn-off Controller (pictured above)
5057
Traceable Walkaway Repeat Turn-on/Turn-off Controller (pictured below)
5058
®
®
™
Traceable® Timer Switch Controller
Program up to 196 switchings per week
Memory permits programming 14 different switchings per day, which may be allocated over four
separate weekly programs for up to 196 switchings per week. Schedule an entire week with the
press of a few keys. Turn equipment on today and off a week later. The controller will turn equipment
on and off in intervals as short as 1 minute or as long as 168 hours. The day programs allow
repeating the same cycle every day of the week, weekdays only, weekends only, or any selected day.
Battery backup
A manual override permits equipment to be switched on or off without disturbing the program.
Program and clock times are maintained for one year by two silver-oxide backup batteries in the
event of an electrical outage. Brilliant, ½-inch-high LCD display shows the time of day, day, and
event number. LED light indicates the on/off status of attached equipment. To assure accuracy
an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). CSA-and NTRL-C-rated, controls equipment to 125 VAC,
50/60 Hz, 15 amps, 1850 watts with a timing accuracy of 0.01%. High-impact ABS plastic case: 2¾ x
6 x 1¾ inches. Weight: 8½ ounces.
Description
Cat. No.
Traceable Timer Switch Controller
5050
®
66
Traceable® Lab Controller
Controls any appliance plugged into the back of controller
In the time-of-day mode, it may be programmed for up to 224 on/off switchings per
day or up to 1568 switchings per week. In the countdown mode, it turns on/off to the
second. In the repeat mode, it continually cycles equipment on/off at any two unique
time intervals desired. A press of a key manually overrides the automatic settings.
Three unique timing modes
Three independent timing channels may be used to countdown and alarm, count-up,
or countdown repeat (repetitively alarms at a specific time interval). Times from 1
second to 100 hours. Alarms sound and flash until manually stopped or may be set to
automatically turn off. Adjustable volume control permits loud to whisper-quiet alarms.
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
Power
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology).
Switching Capability
Calculator channel has metric converter
Timing Accuracy
The metric converter changes weights, liquid measurements, and
temperatures from metric to U.S. or vice versa. The calculator feature
adds, subtracts, multiplies, and divides on a six-digit display. The clock
displays the day of the week and time of day to the exact second.
Description
Cat. No.
Traceable® Lab Controller
5010
Cycle Duration
On/Off Programs
Display
Case
Size
Weight
125 VAC, 50/60 Hz, 3-pronged grounded plug
125 VAC, 50/60 Hz, 15 amps, 1875 watts
0.01 sec
Minimum 1 sec, Maximum 168 hr
1568 per week, 224 per day
6-digit, ½-inch-high LED
Impact-resistant ABS plastic
6½ x 4¾ x 3½ inches
2 pounds
24-Hour Controller & Traceable® 7-Day Controller
Units combine a controller and an eight-outlet strip in a single package. Controllers can turnn on
chemical, water, or air pumps as part of a sampling process; warm up instruments at presett
times; and automate testing, heating, mixing, or even the feeding of animals.
Features time-controlled and manual outlets
Four of the outlets are time-controlled and four are manual. An override permits
equipment to be switched on or off instantly without disturbing the program. This feature
allows use of equipment without ever removing the plug. Safety features include a lightedd
on/off switch and a push-to-reset circuit breaker. Unit is UL-listed and is rated to 15 amps,
s,
1000 watts at 125 VAC. Controller is tested and components are burned-in to eliminate
the possibility of field failure.
24-Hour Controller
The 24-hour electromechanical controller has index pins, which are raised or lowered to sett
trip times. Pins constantly display all time settings; a single glance verifies an entire program.
m.
May be set in any 15-minute increment. Program repeats itself every day.
7-Day Traceable® Controller
Controller will turn equipment on and off in intervals as short as one minute or as long as 168 hours. Set 84 on/off switchings per week
with up to 12 different switchings per day. Turn an instrument on today and off a week later. The repeat mode allows programming the
same cycle each day for 365 days, scheduling a weekly program cycle for 52 weeks, jumping weekends, or skipping any selected days
Meets the most critical experimental requirements and quality control needs. To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology). Accuracy is 0.01%. The memory chip and the display are powered by an internal nicad
battery for program backup in the event of an electrical outage. Bright, ½-inch-high LCD shows the exact time of day complete with indicator,
day of the week, and the on/off status of the program. Size: 9½ x 2¾ x 1½ inches. Weight: 1 pound. Supplied: rugged plastic case and 4-foot
cord with a three-pronged, grounded plug.
Description
Cat. No.
24-Hour Electromechanical Controller (pictured left) (not Traceable ®)
5055
Traceable® 7-Day Controller (pictured right)
5056
67
Traceable® Outlet Controller
Traceable® Humidity Controller
Versatile and economical controller may be
programmed to turn equipment on and off at
any minute of any day. A fail-safe memory
permits programming 14 different switchings per
day. They may be allocated over four separate
weekly programs for up to 196 switchings per
week. Random function automatically turns the
controller on and off at random intervals.
Humidity outlet switch turns
any piece of equipment on or
off. Program higher-ON/lowerOFF or lower-ON/higher-OFF at
any set point from 30 to 90%
RH in 1% RH increments. Use
for turning humidifiers,
dehumidifiers, or alarms on
or off. Three-key operation is
extremely easy and fast.
Easy to program
Schedule an entire week with the press of a few
keys located on the front panel.
Battery backup
Set intervals from 1 min to 168 hrs
The Outlet Controller will turn equipment on
and off in intervals as short as 1 minute or as long as 168 hours. Turn an
instrument on today and off a week later. The AM/PM day programs allow
repeating the same cycle every day of the week, weekdays only, weekends
only, or any selected days. A manual override permits equipment to be
switched on or off without disturbing the program. Program and clock times
are maintained by a backup battery in the event of an electrical outage.
Brilliant, ½-inch-high LCD shows the time of day, day, and event number.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). CSA-and NTRL-C rated unit controls equipment
to 125 VAC, 50/60 Hz, 15 amps, 1850 watts with timing accuracy of 0.01%.
Supplied: two batteries. Size: 2 x 4 x 3½ inches. Weight: 5½ ounces.
Description
Cat. No.
Traceable® Outlet Controller
5090
A manual override permits
equipment to be switched on
or off instantly without
disturbing the program.
Rechargeable nicad battery maintains operation for days
in the event of an electrical outage. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by
A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology).
LCD (½-inch-high digits) displays relative humidity and
ON/OFF message to show status of attached equipment.
Accuracy is ±5% RH. Three-pronged grounded receptacle
turns apparatus on/off to 125 VAC, 15 amps, 1800 watts, 1/3
horsepower. High-impact ABS plastic case: 41/8 x 23/8 x 1½
inches. Weight: 4½ ounces.
Description
Cat. No.
Traceable® Humidity Controller
4190
Traceable® Temperature Controller
Turn equipment on/off at any temperature
Controller turns any piece of equipment on or off when temperature rises above high set point or falls
below low set point. Wide measurement range of –4 to 140°F and –20 to 60°C, and setting range of
32 to 140°F (0 to 60°C) permits measuring, and maintaining temperatures above or below ambient.
Control heating elements, cooling blocks, hot plates, heating mantles, cooling systems, or incubators
to an accuracy of ±1°C. Controller may be set in 1° increments. Display reads in °F and °C with a 0.1°
resolution. Unit accepts standard, three-pronged plug and controls equipment rated to 1800 watts, 15
amps. Brilliant, ½-inch-high LCD shows the temperature and time of day. Red LED status light indicates
on/off mode of attached equipment. Uses the same microchip and software that control sophisticated
plant operations. May also be programmed to turn equipment on and off at any minute of any day.
Memory permits programming three different pairs of on/off time switchings per day. Chip and display are powered by two batteries. Settings
are maintained for 1 year in the event of electrical outage. Simple commands are a joy to use. Display walks you through steps. Set high
and low temperatures or schedule timer on/off settings in just seconds with press of a few keys. Manual override permits equipment to be
switched on or off instantly without disturbing temperature or timer settings.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability for temperature only to standards provided by NIST (National Institute of Standards and Technology). Size: 2¾ x 5½ x 1¼
inches. Weight: 1 pound. May be used with equipment to 115 VAC, 1800 watts, 15 amps. Temperature sensor cable is 3½ feet in length.
68
Description
Cat. No.
Traceable® Temperature Controller
4130
Traceable® Countdown Controller
Countdown controller turns any piece of equipment on or off at the end of a set time period.
Programmable in 1-minute intervals from 23 hours, 59 minutes, 59 seconds to 1 minute. Program
controller in an instant with easy-to-use countdown time mode.
Switch equipment on/off instantly with manual override
Performs reproducible stirring, heating, or pumping times. Use for timed shutdown or start-up of
apparatus during any test. A manual override permits equipment to be switched on or off instantly
without disturbing the program. Button cell batteries maintain programs in the event of power outage.
Up to 196 on/off switchings per week
In addition to the countdown mode, the controller operates in a time-of-day mode, which permits
programming 14 different time-of-day clock switchings, up to 196 on/off switchings per week. To
assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology). LED indicates status of attached equipment. Timing
accuracy is 0.01%. Three-pronged grounded receptacle relay turns on/off apparatus to 125 VAC, 15
amps, 1800 watts, 1/3 horsepower. Unit is CSA-and NTRL-C-rated. High-impact ABS plastic case is 43/8
x 21/3 x 1¾ inches. Weight: 5½ ounces.
Description
Cat. No.
Traceable Countdown Controller
5095
®
HUMIDITY CHART
Cat. No.
Page
No.
Traceable®
Certificate
Supplied
Relative Humidity
Range
Resolution
Accuracy
Temperature
Range
Resolution
Accuracy
Features
6404
70
Yes
0.0 to 90.0%RH
0.10%
±5%RH
0 to 50.0°C
0.1°
±1°C
Removable SD memory card
4087
71
Yes
10.0 to 95.0% RH
0.01% RH
±1.5% RH
0.0 to 50.0°C
0.01°
±0.4°C
Simple point/read technology
4380
71
Yes
25 to 90% RH
1% RH
±2% RH
–20 to 60°C
0.1°
±1°C
Radio-signal from remote
4096
72
Yes
25 to 95% RH
1% RH
±2% RH
0 to 50°C
1°
±1°C
Dual min/max memories
4094
72
Yes
25 to 95% RH
1% RH
±2% RH
0 to 50°C
1°
±1°C
Compact size
4095
72
Yes
25 to 95% RH
1% RH
±2% RH
0 to 50°C
0.1°
±1°C
Sharp display
4093
72
Yes
20 to 95% RH
1% RH
±3.5% RH
0.0 to 50.0°C
0.1°
±1°C
Pen shape
4088
73
Yes
25 to 95% RH
1% RH
±2% RH
0 to 50°C
0.1°
±1°C
RH/temperature at a glance
4392
73
Yes
0 to 100.0% RH
0.1% RH
±3% RH
–20.0 to 50.0°C
0.1°
±1°C
Dew point, min/max
4187
73
Yes
10.0 to 95.0% RH
0.1% RH
±2.5% RH
–20.0 to 60.0°C
0.1°
±1°C
Recorder output
4085
74
Yes
5.00 to 95.00% RH
0.01% RH
±1.5% RH
40.0 to 104.4°C
0.01°
±0.4°C
Response time of 10 seconds
4080
74
Yes
10.00 to 95.00% RH
0.01% RH
±1.5% RH
40.0 to 104.4°C
0.01°
±0.4°C
Also reads dew point
4189
75
Yes
10.0 to 95.0% RH
0.01% RH
±3% RH
0.0 to 50.0°C
0.01°
±1°C
Computer-output
4385
75
Yes
10.0 to 95.0% RH
0.1% RH
±2% RH
–17.7 to 93.3°C
0.1°
±1°C
Computer-output
4181
76
Yes
10 to 95% RH
0.1% RH
±3% RH
–20 to 60°C
0.1°
±1°C
Hard-copy results
4184
76
Yes
25 to 95% RH
1% RH
±2% RH
–50 to 70°C
1°
±1°C
Jumbo digits
4082
77
Yes
25 to 95% RH
1% RH
±2% RH
–50 to 70°C
0.1°
±1°C
Remote sensor with memory
4154
77
Yes
20 to 99% RH
1% RH
±5% RH
–50.0 to 70.0°C
0.1°
±1°C
Remote humidity sensor
4410
78
Yes
1 to 99% RH
0.1% RH
±4% RH
–40 to 70°C
0.1°
±1°C
Dew point and wet-bulb monitor
4192
78
Yes
0 to 100% RH
10% RH
±5% RH
n/a
n/a
n/a
Humidity card (pack of six)
4186
78
No
0 to 100% RH
1% RH
±2.5% RH
–40 to 50°C
1°
±1.5°C
No maintenance required
69
Traceable® Memory-Card Humidity/
Temperature/Dew Point
Traceable® Memory-Card Humidity/Temperature/Dew Point is a stand-alone unit with data
logging capabilities. It records readings from once a minute up to once every 720 minutes
on a removable standard SD memory card. Memory card reader (supplied) plugs into any
USB computer port for an instant report. Text report includes date/time of day and readings
of sensors, report may be sent to any spreadsheet or database. Unit monitors cabinets,
incubators, clean rooms, store rooms, labs, hoods, and critical areas. Unit captures 5.9
million readings with the supplied 256 mb removable SD memory card.
Temperature range: 0 to 50.0°C with 0.1° resolution. Temperature accuracy: ±1°C. Humidity
range: 0.0 to 90.0%RH. Resolution: 0.1. Humidity accuracy: ±5%RH at 25°C from 20
to 85%RH; ±7%RH elsewhere. Dew point range: –20.0 to 50.0°C with 0.1° resolution.
Minimum/Maximum feature displays highest/lowest readings for any time period.
Alarm features sounds and flashes a bright red LED when temperature, humidity, and/or dew
point rise above or fall below user-set trip points, alarm sets in 0.1 increments. Unique 4-line
display simultaneously shows ambient temperature, humidity, dew point and time-of-day.
Operates using supplied batteries or supplied AC adaptor.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Size: 4¼ x 3½
x 1¼ inches. Weight: 7 ounces. Case: high-impact, chemical-resistant ABS plastic. Supplied:
256 mb SD memory card, USB memory card reader, magnetic mounting strips, Velcro ®, wall
mount, bench stand, batteries, adaptor, and Traceable ® Certificate.
Description
Cat. No.
Traceable Memory-Card Humidity/Temperature/ Dew Point
6404
®
Traceable® Digital Humidity
Temperature/Dew Point Meter
Convenient triple memories recall minimum/maximum readouts for relative humidity,
dew point, and temperature. Simultaneously displays all three current readings. Alwayson feature allows for monitoring conditions all night, over weekends, and for extended
time periods. Audible and visual LED alarm may be set to trigger at three different
humidity readings (55%, 60% or 65%). Solid state sensors deliver response times of
less than 30 seconds. Oversized display supplies updates once a second.
Relative humidity range: 1 to 99%. Resolution: 1%. Accuracy: ±2% mid-range, ±4%
elsewhere. Ambient temperature and dew point range: 14 to 140°F (–10 to 60°C).
Resolution: 1°. Accuracy: ±1°C. To assure accuracy an individually serial-numbered
Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute
of Standards and Technology). Size: 2⅝ x 3⅞ x ⅝ inches. Weight: 6 ounces. Case:
durable, chemical and shock-resistant ABS plastic. Supplied: wall mount, batteries, and
Traceable® Certificate.
Description
Cat. No.
Traceable Digital Humidity Temperature/Dew Point Meter
4800
®
70
Traceable® General-Purpose Hygrometer/Thermometer
Perfect quality-control unit displays accurate answers for every air measurement. Self-contained, the
humidity and temperature sensors are built-in. Easy-to-operate unit features a DATA HOLD key allowing
readings to be captured and noted.
Traceable to NIST for accuracy
General-purpose unit has a relative humidity range of 10.00 to 95.00% with a resolution of 0.01% and an
accuracy of ±1.5% RH. Temperature range is 32 to 122°F or 0 to 50°C with a resolution of 0.01° and an
accuracy of ±0.4°C at tested points. Response time is 30 seconds to 3½ minutes. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology). Supplied: battery and Traceable® Certificate. High-impact ABS plastic unit measures 2¾ x
8 x 1½ inches. Weight: 8 ounces.
Description
Cat. No.
Traceable General-Purpose Hygrometer/Thermometer
4087
Data Acquisition System (complete description on page 103)
4237
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
®
Traceable® Radio-Signal Remote
Humidity/Thermometer
Displays humidity and temperature from 100 feet away
Traceable® Radio-Signal Remote Humidity Meter/Thermometer receives
a radio signal from the remote wireless sensors. It eliminates the cable.
Place the main unit at your desk or bench. Place the remote sensor
module in labs, ducts, and storage facilities—even outdoors. Remote
sensor sends humidity and temperature signals to the main digital display.
Transmits on a frequency of 433 MHz. Range is 65 to 100 feet, depending
on the location or number of walls.
Traceable to NIST for accuracy
Relative humidity range is 25 to 90% with a resolution of 1% and an
accuracy of ±2% RH mid-range to ±4% RH elsewhere. Switchable
thermometer range is –4 to 140°F and –20 to 60°C, with a resolution of 0.1°
and an accuracy of ±1°C. To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Displays up to three modules
Main unit can receive and display data from up to three different remote sensor modules. Data is transmitted every 30 seconds. Display’s trend
indicators show if humidity and temperature are rising or falling. Minimum and maximum memory display allows monitoring of conditions over
short or long periods, including overnight or weekends. An alarm may be set in increments of 1% RH and 1°. The alarm sounds when the humidity
or temperature exceeds the high and low set points. Jumbo digits (13/8 inches-high) may be read from 25 feet. Case is high-impact, chemicalresistant ABS plastic. Supplied: flip-open stand, wall brackets, Velcro®, one main unit (4¼ x 4½ x ¾ inches, weight: 6 ounces), one remote sensor
module (21/3 x 3½ x ¾ inches, weight: 3 ounces), internal humidity sensor, internal temperature sensor, batteries, and Traceable® Certificate.
Description
Cat. No.
Traceable Radio-Signal Remote Humidity Meter/Thermometer
®
Additional Traceable Humidity/Thermometer Remote Sensor Module
®
May be set to channel 1, 2, or 3. Total of three modules may be used with main unit.
4380
4381
71
Traceable® Digital Humidity/Temperature Meter
Digital Relative Humidity/Temperature Meter with Minimum/Maximum Memory
Routine measurements, monitoring round-the-clock, quality-control needs, and critical experimental
requirements are features of this humidity/temperature meter. Unique instrument shows the exact air
conditions in labs, hoods, clean rooms, coolers, stockrooms, incubators, environmental chambers,
and chemical storage areas.
Memories store Min/Max readings
Continuously and simultaneously displays relative humidity and temperature in °F/°C with dual-recalll
memories. Minimum and maximum memories may be displayed or cleared at any time with the touchh
of a key. Monitors conditions overnight, on weekends, or for any time period. Temperature range is 322
to 122°F and 0 to 50°C with a resolution of 1° and accuracy of ±1°C. Humidity range is 25 to 95%,
resolution is 1% RH, and accuracy is ±2% RH mid-range to ±4% RH elsewhere. Fast-response soliddstate sensors show changes in less than 30 seconds. Display is updated once per second.
Fulfills CLIA requirement
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Extra-large, easy-to-view 5/8 -inch-high digits
can be read at a glance. Meets federal requirements for CLIA specification 493.1252 for monitoring
temperature and humidity.
Self-contained, stable, accurate unit requires no adjustment or maintenance. Case is chemicaland shock-resistant ABS plastic. Supplied: Traceable ® Certificate, wall mount, bench stand,
switch to read °F/°C, fast-response solid-state sensors, and two batteries. Size: 25/8 x 37/8 x 5/8
inches. Weight: 2½ ounces.
Description
Cat. No.
Traceable® Humidity/Temperature Meter with Dual Min/Max Memories
4096
Traceable Digital Humidity Meter
4094
®
Traceable® Digital Humidity/Temperature Meter
Features identical to 4096 but without memories. Size: 3¼ x 7 x ¾ inches. Displays temperature to 0.1°.
4095
Traceable® Humidity/Temperature Pen
Humidity/Temperature Pen with memory makes it
easy to monitor any location
Pen continuously and simultaneously displays both RH and °F/°C with dual-recall memories.
mories.
Handy pocket clip makes it easy to carry. Memory displays highest and lowest humidity/
y/
temperature readings achieved overnight or during any time period. Three-quarter-inchhigh LCD can be read at a glance. Meets Federal Government CLIA requirement 493.1252.
Pocket pen has fast-response, solid-state sensors which respond in less than 6 seconds.
Display is updated every second. Temperature range is 32.0 to 122.0°F (0.0 to 50.0°C)
with a resolution of 0.1° and an accuracy of ±1°C. Relative humidity display is 20 to 95%.
Resolution is 1% and accuracy is ±3.5% RH midrange to ±5.5% RH elsewhere.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Supplied: clip,
Traceable® Certificate, and battery. Case is high-impact, chemical-resistant ABS plastic.
Size: 5½ x 7/8 x 2/3 inches. Weight: 1¼ ounces.
72
Description
Cat. No.
Traceable® Humidity/Temperature Pen
4093
Traceable® Humidity/Temperature Meter
Digital display permits instant readings of relative humidity and temperature (°F/°C). It is ideal to monitor conditions in
chambers, clean rooms, food processing, scientific labs, and all humidity-sensitive manufacturing operations. Memory
captures 99 data points which can be recalled on command. To assure accuracy an individually serial-numbered
Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and Technology). Humidity range is 10.0 to 95.0% RH
and temperature range is –4.0 to 140.0°F (–20.0 to 60.0°C). Resolution is 0.1 for both readings. Accuracy is ±2.5% RH
mid-range to ±5% RH elsewhere. Response time is 30 seconds to 5 minutes. Data HOLD switch freezes the display
to capture a reading. Large, bright, ½-inch-high, four-digit liquid crystal display can be read from 10 feet away. Rugged
handheld unit is completely portable and designed for years of dependable and reliable service.
Instantly updates readings
Battery powers the unit for 1 year of intermittent use or 100 hours of continuous readings. Precision thin-film
capacitance sensor updates the display three times per second. Supplied complete with Traceable ® Certificate, battery,
tripod mounting hole, and hard carrying case. Size: 2½ x 10½ x 1 inches. Weight: 7 ounces.
Description
Cat. No.
Traceable® Humidity/Temperature Meter
4187
Traceable® Pocket Hygrometer/Dew Point/Thermometer
Ignores condensation
Compact design features an electronic capacitance polymer film sensor not affected by condensation. Unit may
be used in 100% humidity. Relative humidity range is 0 to 100.0% with a resolution of 0.1% and an accuracy of
±3% RH mid-range to ±4% RH elsewhere. Both dew point and temperature ranges are –20.0 to 50.0°C and
–4.0 to 122°F with a resolution of 0.1° and an accuracy of ±1°C. Full range response is 30 to 60 seconds.
Traceable to NIST
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration
ion
laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
rds and
Technology). At the press of a key, unit recalls minimum/maximum readings. HOLD key freezes the display to record
rd a
reading. Dual display shows relative humidity with either dew point or temperature on a ¾-inch-high LCD. Size: 6½
½ x 2 x 2/3
inches. Weight: 3 ounces. Supplied: Traceable® Certificate and batteries.
Description
Cat. No.
Traceable® Pocket Dew Point/Hygrometer/Thermometer
4392
Traceable® Hygrometer/Thermometer
RH/Temperature at a glance
Traceable® Hygrometer/Thermometer provides readings instantly. It is ideal for constantly monitoring labs,
fume hoods, walk-ins, plant areas, and storage facilities. Large, easy-to-read ½-inch-high LCD digits can
be read from 15 feet. Unit reads 25 to 95% relative humidity and temperature from 32 to 122°F and 0 to
50°C. Resolution is 1% RH and 0.1°. Accuracy is ±2% RH mid-range otherwise ±4% RH. Temperature
accuracy is ±1°C (0 to 40°C) otherwise 2°C. To assure accuracy an individually serial-numbered
Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It
indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Bench stand and wall mount
Self-contained, stable, and accurate unit requires no adjustment or maintenance. Supplied: wall-mount
screw, bench stand, Traceable® Certificate, battery. Size: 3½ x 5 x 7/8 inches. Weight: 6 ounces.
Description
Cat. No.
Traceable Hygrometer/Thermometer
4088
®
73
Traceable® Humidity/Temperature/Dew Point Meter
Traceable unit displays humidity to 0.01%,
use for QC, ISO 9000, and R/D
Traceable® Digital Hygrometer/Thermometer/Dew Point
instrument, by using a special breed of artificial intelligence,
provides a response time of under 10 seconds with a resolution
of 0.01% RH, 0.01°F/°C, and 0.01 dew point/frost point °F/°C. It
samples once per second. Fuzzy logic algorithm pinpoints the
exact answer almost instantly.
Fast response with high accuracy
Direct-reading instrument has an accuracy of ±1.5% RH, 0.01 RH
resolution and reads from 5 to 95%RH. Results are reported in both
°F and °C from –40.00 to 220.0°F (–40.00 to 104.0°C) temperature,
and from –40.00 to 140.0°F (–40.00 to 60.00°C) dew point/frost
point. Temperature resolution is 0.01° with an accuracy of ±0.4°C.
Certified Traceable to NIST
To assure accuracy an individually serialnumbered Traceable® Certificate is provided from
our ISO 17025 calibration laboratory accredited by
A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology).
Clean room and food applications
Fulfills federal CLIA requirements and is ideal for hoods, clean rooms, food storage, process control,
incubators, desiccators, drug manufacturing, environmental chambers, corrosion analysis, and inside/
outside air monitoring. Four-digit LCD can be read from 10 feet. Rugged handheld unit is designed for
years of service.
Wireless Capable
(see page 103)
Hi/Lo memories, programmable alarms, and data output
Memory recalls both minimum and maximum readings in dew point/frost point, temperature, and
humidity at any time. High and low alarms can be programmed in dew point/frost point, temperature,
and humidity. When an out-of-range condition is sensed, an alarm sounds and the display flashes.
Computer output permits data to be captured, transferred, stored, and printed. Size: 5½ x 3½ x 1¼
inches. Weight: 12 ounces. Probe length is 7 inches. Cable length is 72 inches. Supplied: probe,
battery, computer output, Traceable® Certificate, and ABS plastic carrying case. AC adaptor (not
supplied) is available.
Description
Traceable® Humidity/Temperature/Dew Point Meter
Fast response model. Range: 5.00 to 95.00% RH, with response time of 10 seconds, and probe diameter of 0.4 inches.
Traceable® Humidity/Temperature/Dew Point Meter
74
Computer Output
Cat. No.
4085
Universal model. Range: 10.00 to 95.00% RH, with response time of 30 seconds to 3½ minutes and probe diameter of 0.4 inches.
4080
Data Acquisition System (complete description on page 103)
4099
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
Traceable® Humidity/Thermometer
Hygrometer/Dew Point/Thermometer with data logger and computer output
Unit simultaneously displays humidity or dew point and temperature. One of the newest and fastest humidity
sensors ever developed displays full-range humidity changes in 5-30 seconds. It records wide humidity
variations on a second-to-second basis. Monitor labs, clean rooms, food processing, and all humidity-sensitivee
manufacturing areas with this high-resolution unit. Relative humidity resolution is 0.01%, accuracy is ±3% RH,,
m
and range is 10.00 to 95.00% RH. Dew Point is a calculated measurement, resolution is 0.01°, accuracy is sum
01°,
of humidity and temperature. Range is –13.50 to 120.1°F and –25.30 to 48.90°C. Temperature resolution is 0.01°,
accuracy is ±1°C, and range is 32.00 to 122.0°F and 0.00 to 50.00°C.
Memories, data logger, computer output
Memory recalls minimum/maximum readings. HOLD key freezes display for reading later. Data logger captures
es 1000
readings manually at the push of a key or automatically when set between 1 to 3600 seconds. Computer output
ut allows
unit to be connected to a computer for down loading data logger results or constant monitoring. To assure accuracy
curacy an
individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory accredited
edited by
A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Jumbosize display is 13/8 -inch-high. Case is impact-resistant ABS plastic. Supplied: probe (2/3 -inch diameter x 8 inch), 40-inch
cable, battery, and Traceable® Certificate. Size: 7 x 2¾ x 11/8 inch. Weight: 9½ ounces.
Description
Cat. No.
Traceable® Humidity/Thermometer
4189
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
Wireless Capable
(see page 103)
Traceable® Memory Hygrometer/Thermometer
Maintains accuracy with do-it-yourself calibration
Traceable® Memory Hygrometer/Thermometer measures from 10.0 to 95.0% relative humidity and
temperature from 0.0 to 199.9°F and –18.0 to 93.0°C. Simultaneously displays both temperature
and relative humidity on its dual 11/8 -inch high LCD. Precision thermistor offers a temperature
accuracy of ±1°C between 0 to 40°C, otherwise ±2°C, and a resolution of 0.1°. An audible click
confirms each key entry.
Microprocessor-based design provides unparalleled accuracy
Resistive polymer film sensor provides humidity readings with an accuracy of ±2% mid-range to ±4%
%
elsewhere. Humidity resolution is 0.1% relative humidity. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and
Technology). At the touch of a key, recalls the Min/Max humidity and temperature readings captured
during any time period. A special HOLD key permits freezing the display to capture readings.
Calibration
Standard
Computer output
Unit is equipped with an output receptacle for transferring data to a computer. ABS
plastic case is both lightweight (10¾ ounces) and rugged for extreme field or lab use.
Supplied: probe/cable, Traceable® Certificate, hard plastic carrying case, battery. Size:
71/8 x 2¾ x 1¼ inches. Probe: 8½ inches x 2/3 -inch diameter with a 3-foot cable.
Description
Cat. No.
Traceable® Memory Hygrometer/Thermometer
4185
Wireless Capable
(see page 103)
Traceable® Memory Hygrometer/Thermometer
Identical to the above unit with accuracy of ±2.0% RH; with Dew Point Display (Range 0.0 to
50.0°C with a resolution of 0.1° and an accuracy of ±2°C; and with programmable audible alarm
4385
33% Calibration Standard with calibration instructions
4394
75% Calibration Standard with calibration instructions
4395
Data Acquisition System (complete description on page 103)
8045
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
75
Traceable® Printing Hygrometer/Thermometer
Printing Hygrometer/Thermometer provides permanent hard-copy results
Provides a permanent record by printing current humidity/temperature/time/date and maximum/
minimum readings, plus the time/date they occurred. Triple display with 3/8 -inch-high LCD digits
continuously and simultaneously shows humidity, temperature 1, and temperature 2. Perfect
dependable and reliable unit to monitor relative humidity and temperature in the lab, plant, and field.
Meets federal requirements for CLIA specification 93.1207. Printer provides hard copy for today’s
stringent QC documentation.
Use anywhere
Ideal for use in hoods, clean rooms, food storage areas, drug manufacturing, all air analysis, and
environmental chambers. Automatically prints the current humidity/temperature 1, temperature 2,
dewpoint, date, and time of day at any programmed interval or at the press of a key.. The printer may
be programmed to automatically and repeatedly print in any increment from 6 seconds to 59 minutes,
59 seconds.
Fast-response, solid-state sensors detect changes in less than 10 seconds. Relative humidity range
is 10 to 95% with a resolution is 0.1% and an accuracy of ±3%RH mid-range to ±5%RH elsewhere.
T1 temperature range is from –20 to 60°C (–4 to 140°F), resolution of 0.1°, accuracy ±1°C (±1.8°F).
T2 Type-K thermocouple temperature range is from –200 to 1333°C (–328 to 2431°F), accuracy
±(0.2% of the reading plus 1.8°C), resolution of 0.1°C (from –200 to 999.9°C) and 0.1°F (from –328
to 999.9°F) otherwise 1°. To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards
dards provided by NIST (National
Institute of Standards and Technology). Supplied: Humidity/T1 temperature probe, T2 Type-K probe, paper, probe holder/stand, carrying case,
batteries. Accessory adaptor for continuous AC operation is available. Humidity/T1 probe is ¾-inch diameter x 6¼ inches, 4-foot cable, T2
probe is 0.06-inch-diameter, 4-foot cable. Size: 7½ x 3 x 1½ inches. Weight: 10 ounces.
Description
Cat. No.
Traceable Printing Hygrometer/Thermometer
4180
®
Traceable® Jumbo Humidity/Temperature Meter
Ambient and probe temperatures
Unit continuously and simultaneously displays ambient relative humidity and (internal
probe and external probe) temperatures in °F or °C, with dual-recall memories. External
thermometer probe is supplied with a 10-foot cable. Both sensor and cable perform
accurately when under water.
Quick-response sensor
External probe range is –58 to 158°F and –50 to 70°C. Ambient internal probe
range is 32 to 122°F and 0 to 50°C. Resolution is 1° and accuracy is ±1°C.
Humidity range is 25 to 95%, resolution is 1% RH, and accuracy is ±2% RH midrange to ±4% RH elsewhere. Fast-response, solid-state sensors show changes
in less than 30 seconds. Display is updated once per second. Minimum and
maximum memories may be displayed or cleared at any time with the touch of a
key. They permit monitoring conditions overnight, on weekends, or for any time
period. Jumbo 11/8 -inch display may be read from as far away as 35 feet.
Fulfills CLIA requirements
To assure accuracy an individually serial-numbered Traceable ® Certificate is
provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and
Technology). Meets federal requirements for CLIA specification 493.1207 for
monitoring temperature and humidity. Case is chemical- and shock-resistant ABS
plastic. Supplied: flip-open stand, wall mount, batteries. Size: 4¼ x 4 x ¾ inches.
Weight: 53/8 ounces.
Description
Cat. No.
Traceable Jumbo Humidity/Temperature Meter
4184
®
76
Traceable® Memory
Humidity/Temperature Meter
Memory Humidity/Temperature Monitor with temperature probe
Memory unit constantly monitors and remembers high and low readings. Probe and cable may be
placed under water.
Remembers Min/Max readings
Display simultaneously shows probe temperature, ambient temperature, and ambient humidity.
Minimum and maximum memory readings may be recalled or cleared with the touch of a key.
Humidity range is 25 to 95% RH with a resolution of 1% and an accuracy of ±2% RH mid-range
to ±4% RH elsewhere. Ambient temperature range is 32 to 122°F and 0 to 50°C with a resolution
of 1°. External temperature sensor displays from –58.0 to 158.0°F and –50.0 to 70.0°C with
a resolution of 0.1°. Temperature accuracy is ±1°C. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited
by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards
and Technology).
Displays ambient and probe temperatures
Use it to record standard lab conditions every day. Memory unit is ideal to constantly monitor
an area or dedicate to one test. Bright LCD digits are ½-inch-high. Handsome design is housed
in a rugged ABS plastic case. Supplied: stand, wall mount, internal humidity sensor, external/
internal temperature sensors, 10-foot cable, Traceable® Certificate, and batteries. Size: 6 x 3¾ x
¾ inches. Weight: 6 ounces.
Description
Cat. No.
Traceable® Memory Humidity/Temperature Meter
4082
Traceable® Remote Alarm RH/Temperature Monitor
Unique instrument features a remote temperature/humidity sensor with a 7-foot
cable. It is ideal for routine measurements, monitoring round-the-clock, all
quality-control needs, and critical experimental requirements. Place the sensor in
hoods, clean rooms, coolers, stockrooms, incubators, environmental chambers,
desiccators, and chemical storage areas. To assure accuracy an individually
serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology).
Minimum and maximum memory
Triple display simultaneously shows minimum/maximum and current humidity, or
minimum/maximum and current temperature. Minimum and maximum memory
feature for both temperature and humidity permits monitoring conditions overnight,
on weekends, or any time period. Humidity range is 20 to 99% with a resolution
of 1%. Accuracy is ±5% RH midrange. Temperature range: –58.0 to 158.0°F and
–50.0 to 70.0°C. Resolution: 0.1°. Accuracy: ±1°C.
High and low alarm
Alarm may be set in 1% RH and 1° increments. Alarm sounds when reading rises above or falls below set
points. Supplied: flip-open stand, slot for wall mounting, external humidity/temperature sensor, battery, and
Traceable ® Certificate. Easy-view, ½-inch-high digits may be read from 10-feet. Case is high-impact, chemicalresistant ABS plastic. Size: 4¼ x 2¾ x ¾ inches. Weight: 4 ounces.
Description
Cat. No.
Traceable® Remote RH/Temperature Monitor with Alarm
4154
77
Traceable® Dew Point/Wet-Bulb/Humidity/Thermometer Signaller
Traceable® unit shows current, minimum, and maximum displays and includes a settable
high/low alarm for all four readings (dew point, wet-bulb, humidity, temperature). Alarm may
be set in 0.1 increments. It sounds for one minute and red LED flashes until readings return
to non-alarm condition. Range is 1 to 99% relative humidity with a resolution of 0.1% and
an accuracy of ±4% between 20 to 80% RH. Temperature range is –40 to 70°C and –40 to
158°F with a resolution of 0.1° (below 100) and an accuracy of ±1°C.
Traceable to NIST
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). Meets federal
requirements for CLIA specification 493.1207 for monitoring temperature and humidity. LCD
digits are 1-inch-high. Supplied: batteries and Traceable® Certificate. High-impact, chemicalresistant ABS plastic case, with plastic built-in stand and wall mount. Size: 41/8 x 41/8 x 1
inches. Weight: 4¼ ounces.
Description
Cat. No.
Traceable® Dew Point/Wet-Bulb/Humidity/Thermometer Signaller
4410
Traceable® Humidity-On-A-Card™
Unique humidity card indicates both the current humidity and the maximum humidity attained. Easy-toread cards are ideal for use with bottles, chemicals, plastic bags, electronics, desiccators, and storage
containers. Easily monitor humidity levels in shipments, optics, and packaging.
Watch colors change as humidity rises/falls
Dual ranges are Current and Maximum. Current range is 0 to 100% relative humidity. Color changes from
blue to lavender in increments of 10% RH. Reversible indicator changes color as the humidity increases
and decreases. Readable to an accuracy of ±5% RH at 75°F (24°C).
View maximum RH% reached
Maximum relative humidity attained is indicated by the highest numbered hole containing dissolved
crystals. Dissolved crystals will cause the paper around the hole to turn blue. Once dissolved, the reading
will not change. (NOTE: for crystals to dissolve properly, the humidity must be maintained at or above the indicated value for a minimum of 24 hours).
Each card is individually sealed in a clear moisture-barrier bag with a Humidity Sponge™ desiccant to keep the card dry and provide for an extended
shelf life. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by
A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Card size is 4 x 4 inches.
Description
Cat. No.
Traceable® Humidity-On-A-Card™ (Pack of six cards)
4192
Dial Hygrometer/Thermometer
Dial provides humidity and temperature readings in an easy-to-read format. Ideal for constantly monitoring
nitoring
labs, fume hoods, walk-ins, plant areas, and storage facilities. Large, analog readout displays 0 to 100%RH,
00%RH,
1%RH resolution, and accuracy ±2.5% RH at 50% RH. Dial also displays temperatures from –40 to 122°F
(–40 to 50°C), 1° resolution, and accuracy ±1.5°C.
No maintenance required
Self-contained, stable, accurate unit requires no adjustment, maintenance, or battery. Supplied: walll mount
screw. Size: 6-inch diameter x 1 inch. Weight: 8 ounces.
78
Description
Cat. No.
Dial Hygrometer/Thermometer
4186
Traceable® Anemometer Pens
with Temperature, Humidity,
Dew Point, and Barometric Pressure
Three units provide for airflow/temperature; airflow/temperature/humidity/dew
point; and airflow/temperature/humidity/dew point/barometric pressure.
Easy to use rugged design
Simple operation eliminates the need to refer to instructions. Designed for
intuitive, easy operation by everyone. Tough ABS plastic case with O-ring seal
and membrane keypad keep out dust and dirt, assuring a long life in severe
lab or harsh plant environments. HOLD key freezes the reading on the display.
High contrast 3/8 -inch-high LCD digits are easy to read. At the press of a key, unit
recalls minimum/ maximum readings.
Traceable to NIST
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Rugged ABS plastic case is 1½ diameter x 8¼
inches; Weight: 6 ounces. Supplied: key-chain carabiner, Traceable ® Certificate,
and four batteries.
Cat. No.
3650
3651
3652
Description
Traceable ® Anemometer/
Thermometer
Traceable ® Anemometer/
Thermometer/Hygrometer/
Dew Point
Traceable ®
Anemometer/Thermometer/
Hygrometer/Dew Point/Barometer
Air Flow Range
0.4 to 30.0 m/s
1.4 to 108.0 km/hr
80 to 5910 ft/min
0.9 to 67.0 mile/hr
0.8 to 58.3 knots
0.4 to 30.0 m/s
1.4 to 108.0 km/hr
80 to 5910 ft/min
0.9 to 67.0 mile/hr
0.8 to 58.3 knots
0.4 to 30.0 m/s
1.4 to 108.0 km/hr
80 to 5910 ft/min
0.9 to 67.0 mile/hr
0.8 to 58.3 knots
Air Flow
Resolution
0.1 m/s; 0.1 km/hr; 1 ft/min;
0.1 mile/hr; 0.1 knots
0.1 m/s, 0.1 km/hr; 1 ft/min;
0.1 mile/hr; 0.1 knots
0.1 m/s; 0.1 km/hr; 1 ft/min;
0.1 mile/hr; 0.1 knots
Air Flow
Accuracy
±3% full scale under 20 m/s
±4% full scale over 20 m/s
±3% full scale under 20 m/s
±4% full scale over 20 m/s
±3% full scale under 20 m/s
±4% full scale over 20 m/s
Temperature
Range
32.0 to 122.0°F
(0.0 to 50.0°C)
32.0 to 122.0°F
(0.0 to 50.0°C)
32.0 to 122.0°F
(0.0 to 50.0°C)
Temp. Resolution
0.1°
0.1°
0.1°
Temp. Accuracy
±0.8°C
±0.8°C
±0.8°C
Humidity Range
--
10.0 to 95.0% RH
10.0 to 95.0% RH
Hum. Resolution
--
0.1%
0.1%
Hum. Accuracy
--
±3 of reading + 1
±3 of reading + 1
Dew Point Range
--
–13.5 to 120.1°F (–25.3 to 48.9°C)
–13.5 to 120.1°F (–25.3 to 48.9°C)
D.P. Resolution
--
0.1°
0.1°
Barometric
Pressure Range
--
--
10.0 to 1100 hPa
7.5 to 825.0 mmHg
0.29 to 32.48 inHg
Barometric
Pressure
Resolution
--
--
0.1 and 1 hPa
0.1 mmHg
0.01 inHg
Barometric
Pressure
Accuracy
--
--
±4 hPa
79
Traceable® Micro-Anemometer/Thermometer
Ultra compact micro-design is small in size and big in features
Unit measures air velocity in five user selectable values: meters per minute, feet per second, miles per
hour, kilometers per hour, and knots. It also displays: maximum airflow measured, temperature in °F
and °C. Measurements are lightning fast with reading updates 2 times per second.
Easy to use rugged design
Simple one-key operation eliminates the need to refer to instructions. Tough ABS plastic case and water-resistant design keeps
out moisture, dust, and dirt, assuring a long life in severe lab,
harsh plant or outdoor environments. High contrast LCD digits are
over 1/3 -inch-high and easy to read. Electro-luminescent backlight
allows the display to be read in total darkness.
Air Flow Range
0.0 to 30.0 m/s,
0.0 to 5860 ft/min,
0.0 to 65.0 mile/hr,
0.0 to 90.0 km/hr,
0.0 to 55.0 knots
Resolution
0.1 m/s,
0.3 km/hr,
19 ft/sec,
0.2 mile/hr,
0.2 knots
Accuracy
±5% full scale
Temperature
Range
–10.0 to 45.0°C
14.0 to 113.0°F
Resolution
0.2°
Accuracy
±2°C
Traceable to NIST
To assure accuracy an individually serial-numbered Traceable ®
Certificate is supplied to indicate traceability to standards provided
by NIST (National Institute of Standards and Technology). Rugged
ABS plastic case is 2¼ x 4 x ¾ inches; Weight: 2 ounces. Supplied: Traceable® Certificate, lanyard, long-life lithium battery.
Description
Cat. No.
Traceable® MIcro-Anemometer/Thermometer
3655
Traceable® Hot Wire Anemometer/Thermometer
Hot Wire Anemometer with two miniature glass-bead thermistors provides greater precision at
low air velocities. Telescope probe expands from 9½ inches to 3 feet for use in hard-to-reach
places. No moving-parts eliminate friction errors caused by rotating vanes. It’s ideal for clean
rooms and environmental tests.
Displays air speed in five ranges
Features five measuring ranges in air velocity: 0.2 to 20.0 meters per second (resolution 0.1),
0.7 to 72.0 kilometers per hour (resolution 0.1), 40 to 3940 feet per minute (resolution 1), 0.5 to
44.7 miles per hour (resolution 0.1), and 0.4 to 38.8 knots (nautical miles per hour) (resolution
0.1). Accuracy is ±(1% full scale plus 1 digit). Unit also displays temperature in °F and °C from
32.0 to 122.0°F and 0.0 to 50.0°C with a resolution of 0.1°. Accuracy is ±0.8°C (1.5°F).
Downloads data to computer or data logger
Computer output allows anemometer to be connected to a computer or data logger for
monitoring results. Memory function recalls the highest and lowest readings. A Data HOLD
key freezes the display to capture readings. Displays simultaneously shows air speed and
temperature. To assure accuracy an individually serial-numbered Traceable ® Certificate is
supplied to indicate traceability to standards provided by NIST (National Institute of Standards
and Technology). Supplied: dual thermistors probe, 40-inch cable, Traceable ® Certificate, 6
batteries, and computer output. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
80
Description
Cat. No.
Traceable® Hot Wire Anemometer/Thermometer
4330
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
Wireless Capable
(see page 103)
Traceable® Anemometer/Thermometer
One-hand operation anemometer displays air velocity and temperature simultaneously. Ease of
operation in hoods or outdoors makes this an ideal instrument. Unit is engineered for years of reliable service even in severe lab, harsh plant, or outdoor environments.
Ranges are: 0.40 to 30.00 meters per second with a resolution of 0.01 meter, 1.4 to 108.0 kilometers
per hour with a resolution of 0.1 kilometer, 80 to 5900 feet per minute with a resolution of 1 foot, 0.9
to 67.0 miles per hour with a resolution of 0.1 mile, 0.8 to 58.0 knots (nautical miles per hour) with a
resolution of 0.1 knot, and –10.0 to 50.0°C and 14.0 to 122°F with a resolution of 0.1 degree. Anemometer accuracy is ±3% of full scale and thermometer accuracy is ±1°C. To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by
NIST (National Institute of Standards and Technology).
Reading is updated instantaneously. A memory key allows the unit to recall the highest and lowest
readings achieved. A HOLD key freezes the display at the current reading, ideal for capturing a reading in a difficult location. An AVERAGE key allows from 2 to 8 readings to be averaged automatically.
Rugged case is chemical-shock-resistant ABS plastic. Extra-large LCD digits are ½-inch-high and can
be read from 10 feet. Supplied: Traceable ® Certificate, battery, hard plastic carrying case, and instructions. Unit is 7¼ x 3 x 1¾ inches. Weight: 73/8 ounces.
Description
Cat. No.
Traceable Anemometer/Thermometer
4331
Data Acquisition System (complete description on page 103)
4237
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
®
Wireless Capable
(see page 103)
Traceable® Digital Anemometer/Thermometer
Traceable® Anemometer measures air velocity/temperature in hoods and
outside environments with ease and accuracy. Use it to display even slight gas
movement in ducts. Designed for heavy use in lab, plant, and field, it is built to
take a beating and still give years of reliable readings.
Ranges are: 0.4 to 30.0 meters per second with a resolution of 0.1 m, 1.4 to
108.0 kilometers per hour with a resolution of 0.1 km, 80 to 5910 feet per minute
with a resolution of 10 ft, and 0.8 to 53.3 knots (nautical miles per hour) with a
resolution of 0.1 knots, and 0.0 to 60.0°C and 32.0 to 140.0°F with a resolution
of 0.1°. Anemometer accuracy is ±(2% + 1-digit). Temperature accuracy is ±1°C.
Traceable to NIST
The extraordinary low-friction, precision, ball bearing design provides a vane
which rotates freely in both low and high velocities. To assure accuracy a serialnumbered Traceable® Certificate is supplied to indicate traceability to standards
provided by NIST (National Institute of Standards and Technology). A HOLD
switch freezes the display at the current reading. Ideal for capturing a reading
in a difficult location. Engineered for years of reliable service even in severe lab
or harsh plant environments. Rugged case is chemical-/shock-resistant ABS
plastic and has a handy built-in, flip-open bench stand for easy monitoring. LCD
is ¾-inch-high and can be read from 15 feet. Supplied: battery, hard plastic
carrying case, and Traceable® Certificate. Handle: 2½ inches long. Wind vane:
2¾ inch diameter, and 4-foot cable. Size: 6¼ x 3 x 1¼ inches. Weight: 1 pound.
Description
Cat. No.
Traceable Digital Anemometer with Thermometer
4091
®
81
Enviro-Meter™
Handheld Enviro-Meter™ provides an anemometer, humidity meter, light meter, and
two thermometers all in one unit. Lightweight and compact case permits onehanded operation. Features a hold key that captures a reading for ease in recording
a result. Min/Max key displays highest and lowest reading over any time period.
Anemometer displays air velocity ranges: 80 to 5910 feet per minute (resolution
1), 0.4 to 30.0 meters per second (resolution 0.1), 1.4 to 108.0 kilometers per hour
(resolution 0.1), 0.9 to 67.0 miles per hour (resolution 0.1), and 0.8 to 58.3 knots
(resolution 0.1). Accuracy is: under 20 meters per second ±3% of full scale readings
and over 20 meters per second ±4% full scale reading.
Relative humidity range is 10.0 to 95.0% (resolution 0.1% RH). Accuracy is: under
70% ±4% RH and over 70% ±(4% of the reading plus 1.2% RH). Light ranges are
0 to 20,000 lux (resolution 1) and 0 to 2000 foot candles (resolution 1). Accuracy is
±5% of the reading and ±8 digits.
Internal ambient thermometer sensor range is 32.0 to 122°F and 0.0 to 50.0°C
(resolution 0.1°). Accuracy is ±1.2° C. External thermometer range is –148.0 to
2372°F and –100.0 to 1300°C (resolution 0.1°). Accuracy is ±(1% of the reading plus
1°C). Comes ready to use with fast-response, Type-K beaded external thermometer probe with cable length of 4-feet, wrist strap, and battery. Size: 6½ x 2¼ x 1¼
inches. Weight: 6 ounces.
Description
Cat. No.
Enviro-Meter
4332
™
BAROMETER CHART
Page No.
83
83
84
84
85
Cat. No.
4247
4198
4199
4245
1081
Traceable® Certificate
Supplied
Yes
Yes
Yes
Yes
Yes
Barometric
Pressure Range
0.29 to 32.48 inHg
10.0 to 1100 mbar(hPa)
7.5 to 825.0 mmHg
8.85 to 32.45 inHg
300 to 1100 mbar (hPa)
28.1 to 31.7 inHg,
954 to 1073 mbar (hPa)
715 to 805 mmHg
23.62 to 31.01 inHg
800 to 1050 mbar (hPa)
23.62 to 31.01 inHg
800 to 1050 mbar
Resolution
0.01 inHg, 0.1 and 1 hPa,
0.1 mmHg
0.01 inHg (1 mbar)
0.05 inHg (0.5 mbar)
0.03 inHg (1 mbar)
0.063 inHg (1 mbar)
Accuracy
±4 hPa
±8 mbar at tested points
±0.5% of reading
±0.09 inHg (±3 mbar)
±6 mb (890 to 1020 mb)
Temperature Range
0 to 50°C
–10 to 60 °C
n/a
–9.5 to 70°C
–50 to 70°C
Resolution
0.1°
0.1°
n/a
0.5°
0.5°
Accuracy
±1°C
±1.5°C
n/a
±1°C
±1°C
Relative Humidity Range
10.0 to 95.0% RH
n/a
n/a
n/a
n/a
Resolution
0.1%
n/a
n/a
n/a
n/a
Accuracy
±3% RH
n/a
n/a
n/a
n/a
Features
Portable, handheld–
Easy operation
Handheld barometer, altimeter,
compass, thermometer, stopwatch
Dial displays three scales
Perfect for the bench
Forecasting indicators show
conditions for the next 12 hrs
82
Traceable® Digital Hygrometer/Thermometer/
Barometer/Dew Point Pen
Measures temperature, humidity, barometric pressure, and dew point
Relative humidity range is 10.0 to 95.0% with a resolution of 0.1% and an accuracy of ±3% RH
mid-range to ±4% RH elsewhere. Temperature range is 32.0 to 122.0°F and 0.0 to 50.0°C with
a resolution of 0.1° and an accuracy of ±1°C. Dew point range is 13.5 to 120.1°F and –25.3 to
48.9°C with a resolution of 0.1°.
Barometer measures pressure in 3 different units: Inches of mercury (inHg) from 0.29 to 32.48
with a resolution of 0.01, millibars (hPa) from 10.0 to 1100 with a resolution of 0.1 and 1 hPa,
and millimeters of mercury (mmHg) from 7.5 to 825.0 with a resolution of 0.1 mmHg. Accuracy
is ±4 hPa. User selectable dual display shows humidity/temperature, humidity/dew point,
barometer/temperature, or barometer/humidity.
Lightweight and compact
Compact design features an electronic capacitance polymer film sensor not affected by condensation. Tough ABS plastic case
and water-resistant design with O-ring seal and membrane keypad assure a long life in severe lab or harsh plant environments. HOLD key freezes the reading on the display. High contrast 3/8 -inch-high LCD digits are easy to read. At the press of a
key, unit recalls minimum/maximum readings.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Size: 1½ inch diameter x 8 inches. Weight: 5 ounces. Supplied: key-chain carabiner, Traceable ® Certificate, and batteries.
Description
Cat. No.
Traceable Digital Hygrometer/Thermometer/Barometer/Dew Point Meter Pen
4247
®
Traceable® Handheld Barometer
Barometer, altimeter, thermometer, stopwatch, compass, and
time-of-day clock—all in the palm of your hand!
Handheld Digital Barometer measures altitude, temperature, and barometric pressure. Also has a
stopwatch/time-of-day clock, compass and graphically displays the barometric pressure trend. To
assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Measures barometric pressure from 8.85 to
32.45 inches of mercury (inHg) with a resolution of 0.01 inHg and from 300 to 1100 millibars (mbar)
with a resolution of 1 mbar. Accuracy is ±8 mbar at tested points. Barometric pressure trend shows
current reading and previous 2, 4, 6, 8, 10, and 12 hours in bar-chart format. Barometric pressure
reading is updated every 15 minutes.
Altimeter
Measures altitude from –700 to 9000 meters (–2296 to 29520 feet) with a resolution of 0.1 from
–500 to 999.9, 1 otherwise. Altitude is displayed in meters or feet. Reading is updated every
2 seconds. Features a minimum/maximum memory. Altitude trend shows present reading and
previous 12 hours. May also be manually adjusted to a known altitude.
Thermometer, stopwatch/timer, clock, and compass
Thermometer displays from –10 to 60°C/14 to 140°F; resolution is 0.1°. Accuracy is ±1.5°C. Temperature display is
updated every minute. Stopwatch times events from 1 second to 23 hrs, 59 min, 59 sec. Alarm timer counts down
from 23 hrs, 59 mins, 59 secs to 1 second. Resolution is 1 second. Clock displays time of day, date, month, and day of week.
Clock also features 12/24 hour format and alarm. Compass feature displays real time direction in whole circle bearing, or compass
bearing. Rugged shock-resistant case, compact size 3¾ x 2¾ x ¾-inches, and light weight 3½ ounces make this the perfect portable
unit. Supplied: lanyard, Traceable® Certificate, and batteries.
Description
Cat. No.
Traceable Hand Held Barometer
4198
®
83
Traceable® Workstation Digital Barometer
Innovative barometer stands on the bench
Workstation digital barometer measures atmospheric pressure, graphically displays
the barometric trend, and reports temperature and time. Ideal for recording ambient
changes in the lab, monitoring conditions affecting sample analysis, and assisting in
the prediction of weather changes.
Barometer measures pressure from 23.62 to 31.01 inches of mercury (inHg) with
a resolution of 0.03 inHg, and from 800 to 1050 millibars (mbar) with a resolution
of 1 mbar. Accuracy is ±0.4 inHg (±12 mbars between 900 to 1050 mbar). Graphic
barometric trend shows present reading and previous 1, 3, 6, and 12-hour readings in
a bar chart format. Adjustable altitude compensation is from –300 to 1200 meters and
–900 to 3600 feet.
Temperature range is 15 to 158°F and –9.5 to 70°C with a resolution 0.5° and
an accuracy of ±1°C between 0 and 50°C. Clock shows time in AM/PM and 24hour formats. To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory accredited by
A2LA. It indicates traceability to standards provided by NIST (National Institute
of Standards and Technology). Accurate forecasting indicators show weather
conditions for the next 12-hours using symbols for sunny, cloudy, rainy, and
partly cloudy. Supplied: Traceable® Certificate and batteries. Size: 4 x 4 x 2¼
inches. Weight: 4 ounces.
Description
Cat. No.
Traceable® Workstation Digital Barometer
4245
Traceable® Precision Dial Barometer
Traceable® Precision Barometer’s triple scales provide a sensitive
measure of atmospheric pressure from 954 to 1073 millibars, 28.1
to 31.7 inches of mercury, and 715 to 805 millimeters of mercury
with a resolution of 0.5 mbar, 0.05 InHg, and 0.5 mmHg. Accuracy is
±0.5% of reading.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology). Case is
rugged corrosion-proof, nickel-chrome. Adjustable pointer may be
set to indicate changes. Complete with altitude adjustment screw
(use at locations as high as 1000 meters), desk stand, and wall
mount. Size: 41/8 inches diameter by 1½ inches. Weight: 1 pound.
84
Description
Cat. No.
Traceable® Precision Dial Barometer
4199
Traceable® Workstation
Barometer with Clock
Measures barometric pressure and graphically displays the barometric trend.
Displays temperature and time of day/date. Ideal for recording ambient changes in the
lab, monitoring conditions affecting sample analysis, and assisting in the prediction of
weather changes. Adjustable altitude compensation from –900 to 3600 feet (–300 to
1200 meters). Graphic barometric trend shows present reading and previous 1-, 3-,
6-, and 12-hour readings in a bar chart format. Forecasting indicators show weather
conditions for the next 12-hours using symbols for sunny, cloudy, and rainy. Clock
shows time in AM/PM or 24-hour format and date. Barometric range: 23.62 to 31.01
inHg / 800 to 1050 mbar. Resolution: 0.063 inHg / 1 mbar. Accuracy: ±6 mb (890
to 1020 mb); otherwise ±10 mb. Temperature range: –58 to 158°F / –50 to 70°C.
Resolution: 0.5°. Accuracy: ±1°C (between 32 to 104°F/0 to 40°C); otherwise ±2°C.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and Technology). Size:
7¾ x 2½ x 3 inches. Weight: 8 ounces. Supplied: batteries, Traceable ® Certificate.
Description
Cat. No.
Traceable® Workstation Barometer with Clock
1081
Wireless Weather System
Weather System is a complete
professional weather station. Perfect for
industrial plants, labs, schools, and others
needing to monitor conditions, forecast
weather, and check environmental air
parameters. Minimum/maximum readings
may be displayed for all measurements.
Displays temperature, humidity, dew point, heat
index, barometric pressure/pressure bar graph,
weather forecast, wind direction/speed, windchill, rainfall amount, and atomic clock/calendar/
moon phase. Programmable alarms for all
measurements signal out-of-range conditions.
Minimum/maximum readings may be displayed
for all measurements.
Data logger holds up to 291 days of data.
Data output permits linking to a computer for
storing all information, making a permanent
weather database, generating analysis, and studying
ying trends. The main unit receives a radio
signal from the remote wireless sensors. System eliminates all cables. Place the main unit
anywhere. Unit Size: 7½ x 5¾ x 1½ inches, display
ay is 6 x 3½ inches. Supplied: all equipment,
all sensors, AC adaptor, and 4 backup batteries (eliminates
eliminates concerns about power outages).
Description
Cat. No.
Wireless Weather System
4250
85
Traceable® Manometer/Pressure/Vacuum Gauges
Manometer displays gauge and differential pressure/vacuum in eleven different units. Response time
is 0.5 second. Hose fittings on the unit permit using hose/tubing with inside diameters from to
1
/16 to 3/16 inches. Large 5/8 -inch-high digits are visible from six feet.
At the touch of a key unit may be zeroed or any pressure may set to zero. Differential feature permits
reading the difference of the pressure or vacuum between two sources. Memory feature recalls highest
and lowest reading over any time period. A count-up timer displays up to 99 hours, 59 minutes, 59
seconds. A DATA HOLD key freezes the display to capture readings. Brilliant backlighting permits
reading even in dark areas. Computer output permits all units to be connected to a computer for
monitoring and storing unlimited results. Accuracy is ±0.3% of full scale between 0 to 50°C. To assure
accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST
(National Institute of Standards and Technology).
Printing model
Data logging feature permits automatically capturing and storing up to 12,000 readings, including
date and time, at intervals as short 1 second or as long as 2 hours. Printing model allows the user to manually capture
and store up to 99 readings, including date and time at the press of a key. Printer provides a hard copy for today’s
stringent quality-control documentation. Printer model prints samples number, current reading, date, and time. Printer
allows both manual memories and data logger memories to be printed without the need for a computer. Computer output
allows manual memories, data logger memories, and current programmable capturing to be streamed to a PC computer.
Printing/data logging model supplied: hose/tubing, batteries, ABS plastic carrying case, computer output, 6-foot
computer cable, software CD, Traceable® Certificate, and paper roll. Size: 2¾ x 8 x 1¾ inches. Weight: 12 ounces.
Non-printing model
Non-printing model supplied: hose/tubing, battery, computer output, Traceable® Certificate, and ABS plastic carrying
case. Computer output allows current programmable capturing to be streamed to a PC computer (computer cable and
software sold separately). Size: 2¾ x 71/8 x 11/8 inches. Weight: 5 ounces.
Cat. No. (Non-Printing)
3460
Cat. No. (Printing/Datalogging))
3466
Maximum Allowed PSI
PSI Range
PSI Resolution
mbar Range
mbar Resolution
bar Range
bar Resolution
cm/H2O Range
cm/H2O Resolution
inch/H2O Range
inch/H2O Resolution
feet/H2O Range
feet/H2O Resolution
mm/Hg Range
mm/Hg Resolution
inch/Hg Range
inch/Hg Resolution
kg/cm2 Range
kg/cm2 Resolution
oz/inch2 Range
oz/inch2 Resolution
kPa Range
kPa Resolution
86
20
–5.000 to 5.000
0.003
–345.0 to 345.0
0.2
–0.3450 to 0.3450
0.001
–351.0 to 351.0
0.2
–138.0 to 138.0
0.1
–12.00 to 12.00
0.01
–259.0 to 259.0
0.2
–10.00 to 10.00
0.01
–0.350 to 0.350
0.001
–80.00 to 80.00
0.05
–34.50 to 34.50
0.02
3461
3462
30
–15.00 to 15.00
0.01
–1034 to 1034
1
–1.034 to 1.034
0.001
–1055 to 1055
1
–415.0 to 415.0
0.3
–35.00 to 35.00
0.02
–776.0 to 776.0
0.5
–31.00 to 31.00
0.03
–1.060 to 1.060
0.001
–240.0 to 240.0
0.2
–103.0 to 103.0
0.1
60
–30.00 to 30.00
0.02
–2068 to 2068
2
–2.068 to 2.068
0.002
–2109 to 2109
2
–830.0 to 830.0
0.5
–69.00 to 69.00
0.04
–1551 to 1551
1
–61.00 to 61.00
0.1
–2.110 to 2.110
0.002
–480.0 to 480.0
0.3
–207.0 to 207.0
0.2
3463
3469
150
–100.0 to 100.0
0.1
–6895 to 6895
4
–6.895 to 6.895
0.004
–7031 to 7031
4
–2768 to 2768
2
–231.0 to 231.0
0.2
–5171 to 5171
3
–204.00 to 204.00
1.0
–7.030 to 7.030
0.004
–1600 to 1600
1
–690.0 to 690.0
0.4
Computer Software
for 3460
through 3463
is available.
(see page 103)
also available
Universal Wireless
Radio-Signal
Transceivers
(see page 103)
Traceable® Pressure/Vacuum Gauges
Displays answer in eight different units. Meter is accurate to 1% full-scale plus 1 digit. Jumbo-size digits are
3
/8 -inch-high. Computer output allows it to be connected to a computer or data logger for monitoring and
keeping results. To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from
our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology).
At the touch of a key the unit may be zeroed. Memory key recalls highest and lowest readings. A DATA
HOLD key freezes the display to capture readings. Transducer has ¼-inch NPT male-threaded end. Cable
is 40 inches. Supplied: Traceable® Certificate, transducer, battery, computer output. Size: 7 x 3 x 1½ inches.
Weight: 9½ ounces.
Wireless Capable
Catalog Number
3165
3166
psi range (resolution)
–14.7 to 725 (1)
–14.70 to 29.0 (0.02)
bar range (resolution)
–1.0 to 50 (0.05)
–1.000 to 2.000 (0.002)
Meter/H20 (resolution)
–10 to 509.5 (0.5)
–10.00 to 20.40 (0.02)
Atmospheres range (resolution)
–1.0 to 49.35 (0.05)
–1.000 to 1.974 (0.002)
mm/Hg range (resolution)
–736 to 37500 (50)
–736 to 1500 (2)
inch/Hg range (resolution)
–29 to 1476 (1)
–29 to 59.05 (0.05)
inch/H20 range (resolution)
–394 to 20050 (20)
–394 to 802 (1)
Kg/cm2 range (resolution)
–1 to 50.95 (0.05)
–1.000 to 2.040 (0.002)
(see page 103)
Description
Cat. No.
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
Traceable® Moisture Meter
Meter’s memory contains nine material groups and calibrations
Traceable® Moisture Meter displays material, wood, wood product, and paper
moisture content 9.0 to 30.0% with a resolution of 0.1% and an accuracy of ±(4% of
the reading plus 5 digits). Memory contains nine material groups such as fiberboard,
construction material, and calibrations for 150 types of wood. Applications include
foods, grains, chemicals, pharmaceuticals, cosmetics, sludge, soil, and automotive
liners. For all other products, user establishes reference moisture readings. Once
programmed, the meter reports directly in percent moisture. Simply touch a material
to measure moisture. Takes only seconds. Unit provides for automatic and manual
temperature compensation.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable ® Certificate is supplied
to indicate traceability to standards provided by NIST (National Institute of Standards
and Technology). Computer output allows it to be connected to a computer or data
logger for monitoring and capturing results. At the touch of a key the instrument recalls
highest, lowest, and average readings. HOLD key freezes the display to capture
readings. Stores results on a computer or data logger. Jumbo-size digits are 13/8 inches
high. Supplied: probe, ten spare pins, Traceable ® Certificate, battery, and computer
output. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
Description
Cat. No.
Traceable® Moisture Meter
4310
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
Wireless Capable
(see page 103)
87
Traceable® Bench
Conductivity Meter
Turn on, insert probe, read results
Fulfill all official lab analysis regulations for CAP,
ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA,,
AWWA, WEF, USGS, USP, ISO, and Federal/State
regulations. Simply turn on, insert probe into solution, and
a
read accurate results. Unit automatically encompassess all
ranges and selects the most appropriate for the currentt reading.
Disable the auto-range function when user-defined ranges
nges are
desired. Control allows user to store four calibration points
oints using
solution standards. Ranges are: 0.01 to 200,000 microsiemens
s
siemens
(micromhos), 0.001 to 20.000 megohms, 0.1 to 20,000 dissolved solids/
parts per million, 2.0 to 42.0 salinity (oceanographic units).
nits). Accuracy:
±0.3% +1 digit.
Traceable to NIST for accuracy
®
To assure accuracy an individually serial-numbered Traceable
a
aceable
Certificate is provided from our ISO 17025 calibration laboratory
a
aboratory
accredited by A2LA. It indicates traceability to standards
d provided by
ds
NIST (National Institute of Standards and Technology). State-of-the-art
microcomputer processor and unique software program
m allow four
calibration points to ensure complete accuracy over thee entire range.
Readings are displayed in conductivity (microsiemens/micromhos),
m
micromhos),
resistivity (megohms), total dissolved solids (milligramss per liter),
salinity (oceanographic units), concentration (user specifi
cified units),
cified
and temperature (Celsius/Fahrenheit). K factor may be adjusted to
match each probe. Specifically designed to measure conductivity in water
analysis, biology, chromatography, food, and PC board rinsing.
Computer output
Computer output may be downloaded to a data logger or computer for analyzing or
reporting at a later time. Makes hard copy results a breeze—no more, hand-scrawled notes
to decipher. Supplied probe contains platinum electrodes and a solid-state thermistor for
automatic/manual temperature compensation. Readings are automatically referenced to
the international standard of 25°C. Temperature compensation is automatic (2% per °C),
user-designated (0.000 to 5.000% per °C), or absolute. Exclusive temperature compensation
disable function fulfills USP-NF (United States Pharmacopoeia, National Formulary, 645
Conductivity Measurement) requirement.
Ranges in Micromhos
(microsiemens)
ABS plastic case withstands the roughest lab environments. Unit comes with 115 VAC
adapter, probe replatinizing current, a probe holder arm, battery, and Traceable ® Certificate.
Supplied glass probe is 5¼ x ½ inches diameter with a cable length of 59 inches. Size: 8¼ x
6 x 3½ inches. Weight: 1½ pounds.
Ranges in Dissolved
Solids/Parts Per Million
Description
Cat. No.
Traceable® Bench Conductivity Meter
4163
Accessories
88
Replacement Conductivity Probe—Glass, K=1, probe range is 0.05 to 200,000 microsiemens (micromhos).
4062
Accessory Probe—Unbreakable Epoxy, K=1, probe range is 1.0 to 200,000 microsiemens (micromhos).
4061
0.01 to 20.00
0.1 to 200.0
1 to 2000
10 to 20000
100 to 200000
Ranges in Megohms
0.001 to 2.000
0.01 to 20.00
0.1 to 20.00
1 to 200
10 to 2000
100 to 20000
Accuracy
±0.3% +1 digit
Traceable® Portable Conductivity Meter
Quick, accurate results on demand
In an instant, Portable Conductivity Meter automatically selects the proper range and displays
the exact answer. This auto-ranging feature may be turned off to accommodate user-entered
ranges. All special calibration data is saved even when unit is turned off. Fulfills all government
measurement requirements plus CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA,
AWWA, WEF, USGS, USP, ISO, and Federal/State regulations. Range in microsiemens
(micromhos) is 0.01 to 200,000, in megohms is 0.001 to 20.000, range in dissolved solids/
parts per million is 0.1 to 20,000, and in salinity is 2.0 to 42.0 (oceanographic units). Accuracy is
±0.3% +1 digit.
Four calibration points
Four unique calibration points may be entered into memory utilizing solution standards. Settings
are stored even when the unit is off. Results are displayed in conductivity (microsiemens) and
(micromhos), resistivity (megohms), dissolved solids (parts per million), concentration (userspecified units), salinity (oceanographic units), and temperature (°F/°C).
Instant-response probe contains platinum electrodes that deliver highly accurate readings.
Internal solid-state thermistor (for automatic/manual temperature compensation) permits all
readings to be referenced to the international standard of 25°C. Temperature compensation
is automatic (2% per °C), user-designated (0.000 to 5.000% per °C), or absolute. K-factor
may be adjusted to match each probe. Exclusive temperature compensation disable function
fulfills USP-NF (United States Pharmacopoeia, National Formulary, 645 Conductivity
Measurement) requirement.
Ranges in Micromhos
(microsiemens)
Cat. No.
Traceable® Portable Conductivity Meter
4063
0.1 to 200
1 to 2000
10 to 20000
100 to 200000
Ranges in Megohms
Use to check the purity of water from stills and demineralizers, to analyze seawater, and to
make up solutions. Simply turn on, insert probe, and read—easiest unit ever designed for
routine analysis, quality control, and research. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
of Standards and Technology). Recorder jack allows continuous monitoring and a permanent
record. Arrow keys allow unit to be calibrated to solution standards. Glass probe: 5¼ x
½ inches diameter with a 59-inch cable. Size: 3¾ x 6¾ x 1½ inches. Weight: 16 ounces.
Supplied: glass probe, Traceable ® Certificate, and battery.
Description
0.01 to 20.000
0.001 to 2.000
0.01 to 20.00
Ranges in Dissolved
Solids/Parts Per Million
0.1 to 20.00
1 to 200
10 to 2000
100 to 20000
Accuracy
Accessories
Cat. No.
Replacement Conductivity Probe—Glass, K=1 Probe range is from 0.05 to 200,000 microsiemens.
4062
ens.
Accessory Conductivity Probe—Unbreakable Epoxy, K=1 Probe range is from 1.0 to 200,000 microsiemens.
4061
±0.3% +1 digit
Traceable® Conductivity Meter
Traceable® Conductivity for pure water
To assure accuracy, a certificate is provided to indicate instrument traceability to standards
dards provided
by NIST (National Institute of Standards and Technology). Use to verify the purity of water
ater from
from stills,
deionizing, and reverse osmosis equipment. Range in microsiemens (micromhos) is 0.11 to 200.0,
2
in
megohms is 2.00 to 20.00. Accuracy is ±0.4% full scale. Adjustment permits calibrationn to solution
s
standards. Ideal for routine analysis, quality control, and research. Eliminates operatorr technique
technique
errors. Probe contains platinum electrodes and a solid-state thermistor (for automatic temperature
tempeerature
compensation). Readings are automatically referenced to the international standard of 25°C.
25°C
C. Supplied:
electronic calibration plug for 10 microsiemens (micromhos) glass probe (5½ x ½-inch diameter),
diam
meter), 59inch cable. Size: 3¼ x 4½ x 1½ inches. Weight: 87/8 ounces.
Description
Cat. No.
Traceable® Conductivity Meter with probe
4070
89
Traceable® Expanded-Range Conductivity Meter
Accurate answers in five seconds
Conductivity meter automatically selects the proper range and displays the exact answer with ease.
Unit fulfills CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP,
ISO, and Federal/State regulations.
Perfect water tester
Use this meter to check the purity of water from stills, deionizers, and reverse osmosis, to test
laboratory glassware rinsing, to measure total dissolved solids, and to make solutions. Specifically
designed to measure conductivity in water analysis, biology, chromatography, food, electronics,
dairies, and PC board rinsing. Perfect for all labs wanting to maintain accreditation. Unit is 100%
compatible with all accreditation analysis requirements.
Simply turn on, insert probe, and simultaneously read result and temperature. Easiest unit ever
designed for routine analysis and quality control. Eliminates operator technique error. Tough,
chemical-resistant ABS plastic case assures a long life in severe lab or harsh plant environments.
Large ½-inch-high LCD is easy to read.
Unit permits auto-range or user selected five unique ranges. Complete range is 0.00 to 200,000
microsiemens (micromhos) and 0.0 to 100,000 dissolved solids/parts per million. Accuracy is ±
(1% of full scale +1 digit). Switchable temperature range is 0.0 to 80.0°C (32.0 to 176.0°F) with a
resolution of 0.1° and an accuracy of 0.6°C. Backlit dual display shows answer and temperature
simultaneously. Memory stores up to five unique calibration settings, one in each range.
Arrow keys allow fast calibration to solution standards. All calibration data is saved even
when unit is turned off. Instant-response glass probe contains platinum electrodes for
precise readings. Solid-state thermistor (for automatic/manual temperature compensation)
permits all readings to be referenced to the international standard of 25°C. Automatic (2%
per °C) temperature compensation or user may set temperature coefficient from 0.000 to
10.000% per °C. Temperature compensation disable function fulfills USP-NF (United States
Pharmacopoeia, National Formulary, 645 Conductivity Measurement) requirement. K-factor
may be adjusted to match each probe. Total dissolved solids factor is adjustable from 0.4 to 1.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to
standards provided by NIST (National Institute of Standards and Technology). HOLD key
freezes the reading on the display. Probe is 6 x ½ inches in diameter with a cable length
of 39¾ inches. Size: 2¾ x 6¾ x 11/8 inches. Weight: 6½ ounces. Probe, batteries, and rigid
carrying care are supplied.
Description
Cat. No.
Traceable® Expanded-Range Conductivity Meter
4360
Data Acquisition System (complete description on page 103)
8045
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
pH/Conductivity Universal Flow-Thru Adapter
Flow-through adapter is universally designed to accept all ½-inch (12.7 mm) diameter conductivity
probes and pH electrodes. Allows constant monitoring of flowing fluids with a standard dip probe.
Two O-rings provide a secure, leakproof seal.
Connectors accept tubing with a 1/16, 3/32, 1/32 and 1/8 -inch inside diameter. Cell volume depends on
the positioning of the probe (approximately 2 to 4 ml). Flow rate may be from 0.001 to 50 milliliters
per minute. Constructed of PTFE (universally chemically inert), it may be in constant use at
temperatures from –100 to 500°F. Size: 1-inch diameter x 2¼ inches.
90
Description
Cat. No.
pH/Conductivity Universal Flow-Thru Adapter
4167
Wireless Capable
(see page 103)
Ranges in Micromhos
(microsiemens)
0.00 to 19.99
0.0 to 199.9
0 to 1999
Ranges in Megohms
0 to 19.99
0 to 199.9
Ranges in Dissolved
Solids/Parts Per Million
0.00 to 9.99 ppm
0.0 to 99.9 ppm
0 to 999 ppm
0 to 9.99 ppt
0 to 99.9 ppt.
Accuracy
±0.3% +1 digit
Traceable® Dual-Display Conductivity Meter
Two displays simultaneously show conductivity readings and temperature measurements. Measures
conductivity in three ranges: 0.1-199.9 microsiemens (micromhos) (0.1 microsiemen resolution), 0.0011.999 millisiemens (millimhos) (0.001 millisiemen resolution), and 0.01-19.99 millisiemens (millimhos)
(0.01 millisiemen resolution). Accuracy is ±(2% of full scale plus 1 digit). Solid-state thermistor (for
automatic/manual temperature compensation) permits all readings to be referenced to the international
standard of 25°C. Automatic (2% per °C) temperature compensation or user may set temperature
coefficient from 0.0 to 5.0% per °C. Resolution is 0.1 and accuracy is ±0.8°C. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided to indicate instrument traceability to
NIST (National Institute of Standards and Technology) from our ISO 17025 calibration laboratory.
Conductivity Ranges
0.0 to 199.9 micromhos
Calibrate using solution standards
0.001 to 1.999 millimhos
Keys adjust probe’s K (constant) factor and
permit calibration to solution standards. Jumbosize digits are 13/8 inches high. Computer output
allows connection to a computer or data logger
for monitoring and storing results. At the touch
of a key, the instrument recalls highest, lowest,
and average readings. A data HOLD key freezes
the display to capture readings. Unit is supplied
with epoxy probe (cable length is 40 inches),
Traceable® Certificate, 9-volt alkaline battery, and
computer output. Size: 7 x 3 x 1¼ inches. Weight:
9½ ounces.
0.01 to 19.99 millimhos
Accuracy
±(2% of full scale plus 1 digit)
Temperature Ranges
0.0 to 60.0 °C
Temperature Resolution
0.1
Temperature Accuracy
±0.8°C
Wireless Capable
(see page 103)
Description
Cat. No.
Traceable® Dual-Display Conductivity Meter
4169
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers (complete description on page 103)
7085
Traceable® Pure H2O Tester
Meets all lab certification requirements
Specifically designed to test water from stills, demineralizers, deionizers, and reverse
osmosis equipment. Meets all lab certification requirements for pure water analysis for CAP,
ASTM, NCCLS, USP, and ACS. Single-purpose unit complies with all accreditation analysis
requirements. Designed for labs obligated to maintain a periodic check of water purity. To
assure accuracy, a Traceable® Certificate is provided to indicate instrument traceability to
standards provided by NIST (National Institute of Standards and Technology) from our ISO
17025 calibration laboratory.
Accurate readings in an instant
Range is 0.1 to 20,000 microsiemens (micromhos) (from pure to raw water). Accuracy is
±0.4% of full scale. Simple operation eliminates errors and ensures everyone reports identical
results. Supplied probe (cable length of 40 inches) provides an instant response. Internal,
solid-state thermometer ensures all readings are automatically referenced to the international
standard of 25°C. Size: 6¼ x 31/5 x 11/3 inches. Weight: 11 ounces. Supplied: carrying case,
instructions, probe, battery, Traceable® Certificate.
Description
Cat. No.
Traceable® Pure H2O Tester
4168
91
Traceable® Conductivity Pen
Three units provide for conductivity, conductivity/total dissolved
solids, and salinity. Pen fulfills CAP, ASTM, NCCLS, CLSI, ACS,
CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO, and
Federal/State regulations.
Easy to use and waterproof
Simply turn on, insert, and simultaneously read result and
temperature. Easiest unit ever designed for routine analysis and
quality control. Eliminates operator technique errors. Chemicalresistant, waterproof ABS plastic case assures a long life in severe
lab or harsh plant environments. Large ½-inch-high LCD digits are
easy to read. Dual display shows reading and temperature. HOLD
key freezes the reading on the display.
Calibration using solution standards
Arrow keys allow fast setting to calibration standards. Calibration
data is saved even when unit is turned off. Instant-response
probe and solid-state thermistor provide precise readings.
Temperature compensation permits readings to be automatically
referenced to the international standard of 25°C or user may set
a programmable temperature coefficient. To assure accuracy an
individually serial-numbered Traceable ® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Waterproof unit is 6½ x
12 /5 x 1¼ inches, Weight: 2¼ ounces.
Cat. No.
92
4365
4366
4367
4365
4366
4367
Description
Traceable® Conductivity Pen
Traceable Conductivity/ Total Dissolved
Solids Pen
Traceable® Salinity Pen
Conductivity Range
0 to 1999 microsiemens
0 to 19.99 millisiemens
0 to 1999 microsiemens
0 to 19.99 millisiemens
–
Dissolved Solid Range
–
0 to 1999 parts per million
0 to 19.99 parts per thousand
–
Salinity Range (NaCL)
–
–
0.00 to 10.00 ppt
10.1 to 70.0 ppt
Resolution
1 microsiemen
1 microsiemen/1 part per million
0.01 ppt
Accuracy
±1% full scale + 1 digit
±1% full scale + 1 digit
±2% full scale + 1 digit
Temperature Range
0.0 to 50.0°C/32.0 to 122.0°F
0.0 to 50.0°C/32.0 to 122.0°F
0.0 to 50.0°C/32.0 to 122.0°F
Temperature Resolution
0.1°
0.1°
0.1°
Temperature Accuracy
±0.5°
±0.5°
±0.5°
Settable Temp. Coefficient
0.0 to 4.0% per °C
0.0 to 4.0% per °C
–
Automatic Temp Compensation
20° and 25°
20° and 25°
25°
Total Dissolved Solids Factor
–
0.4 to 1.00
–
Use with Calibration Standards
400 microsiemens to
19.99 millisiemens
400 microsiemens to 19.99 millisiemens
400 ppm to 19.99 ppt
0.20 to 7.00%
®
Traceable® Conductivity Standards Certified Reference
Material (CRM), ISO Guide 34
Use Standards with all meters
Traceable® Conductivity Standards, a Certified Reference Material, are 100% compatible with
all makes of instruments and probes. Traceable ® Conductivity Standards are the most accurate
available. Accuracy at 25°C is (±0.25 microsiemens for 1, 5, 10 microsiemen solution or ±0.25%
for other solutions) or the uncertainty shown on the certificate, whichever is greater. Each bottle
is labeled for calibrating conductivity (microsiemens/micromhos), resistivity (ohms), and dissolved
solids (parts per million).
Meets test requirements
This certified reference material meets test requirements for Federal, State, and local agencies,
CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO.
Traceable® Certified Reference Material complies with and is essential for use in these official
methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888,
DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO
9000 certifications. Material may be used to calibrate all conductivity meters and to determine all
conductivity cell constants.
A2LA accreditation ISO 17025 and ISO Guide 34 plus ISO 9001
To assure accuracy an individually serial-numbered Traceable ® Certificate is supplied to indicate
traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a
National Standards Laboratory. A2LA accredited certification provides the highest achievable level of
quality assurance, documentation, and accuracy. Certified Reference Materials are produced in an A2LA
accredited ISO 17025 calibration laboratory by an A2LA accredited ISO Guide 34 reference material
producer. Additional accreditations include ISO 31 (certificate content) and ISO 35 (statistical analysis),
plus ISO 9001 (certified quality manufacturer).
Each bottle is supplied with step-by-step calibration instructions, individual temperature compensation chart, traceability information, and
Traceable® Certificate. Supplied in a 16-ounce bottle.
Traceable® Conductivity Standards Certified Reference Material Accredited ISO Guide 34, ISO 35, ISO 31, ISO 17025
Cat. No.
Cat. No. Individually Tested
Microsiemens/Micromhos
Megohms
TDS/PPM
4274
4574
1
1
.66
4270
4570
5
0.2
3.3
4065
4565
10
0.1
6.6
4066
4566
100
0.01
66
4067
4567
1000
0.001
666
4173
4573
1413
0.00071
933
4068
4568
10000
0.0001
6666
4069
4569
100000
0.00001
66666
4161
4561
150000
0.000006
100000
4562
200000
0.000005
133333
4162
Redi-Stor™ Conductivity Probe Storage Solution
Redi-Stor™ is the ideal solution for storing conductivity probes. It preserves cleanliness,
eliminates growths found when storing in water only, and maintains the probe for immediate
use with no conditioning.
Description
Cat. No.
Redi-Stor Conductivity Probe Storage Solution
4170
™
93
Traceable® One-Shot™ Conductivity Standard (CRM)
Certified Reference Material, ISO Guide 34
Single-use conductivity standards calibrate all conductivity meters and probes for maximum
accuracy. One-Shots™ eliminate concern about external container contamination. Calibration is
made in the standard’s vial. Container fits all probes. Extra-large opening (1¾-inches diameter)
and extra-large, 3½-inches depth allow probe calibration to take place in the standard’s
polyethylene container. One-Shot™ Traceable® standards accommodate all conductivity probes
and are ideal for lab or field conditions.
Use Standards with all meters
Traceable® Conductivity Standards, a Certified Reference Material, are 100% compatible with
all makes of instruments and probes. Traceable ® Conductivity Standards are the most accurate
available. Accuracy at 25°C is (±0.25 microsiemens for 1, 5, 10 microsiemen solution or ±0.25%
for other solutions) or the uncertainty shown on the certificate, whichever is greater. Each
container is labeled for calibrating conductivity (microsiemens/micromhos), resistivity (ohms), and
dissolved solids (parts per million).
Meets test requirements
This certified reference material meets test requirements for Federal, State, and local agencies,
CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO.
Traceable® Certified Reference Material complies with and is essential for use in these official
methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888,
DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO
9000 certifications. Material may be used to calibrate all conductivity meters and to determine all
conductivity cell constants.
A2LA accreditation ISO 17025 and ISO Guide 34
To assure accuracy an individually serial-numbered Traceable ® Certificate is supplied to indicate
traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a
National Standards Laboratory. A2LA accredited certification provides the highest achievable level of
quality assurance, documentation, and accuracy. Certified Reference Materials are produced in our
A2LA accredited ISO 17025 calibration laboratory by an A2LA accredited ISO Guide 34 reference
material producer. Additional accreditations include ISO 31 (certificate content) and ISO 35 (statistical
analysis), plus ISO 9001 (certified quality manufacturer). Each container is supplied with step-bystep calibration instructions, individual temperature compensation chart, traceability information, and
Traceable® Certificate. Supplied as a pack of six. Each One-Shot™ contains 100 milliliters.
One-Shot™ Traceable® Conductivity Standards, Six Pack
Certified Reference Material Accredited ISO Guide 34, ISO 35, ISO 31, ISO 17025
94
Cat. No.
Quantity
4271
4175
4176
4177
4174
4178
4179
4580
4581
4172
6/Pk
6/Pk
6/Pk
6/Pk
6/Pk
6/Pk
6/Pk
6/Pk
6/Pk
6/Pk
Microsiemens/Micromhos
Megohms
5
0.2
10
0.1
100
0.01
1000
0.001
1413
0.00071
10000
0.0001
100000
0.00001
150000
0.000006
200000
0.000005
Assortment (one each of the above, except 4271, 4580, 4581)
TDS/PPM
3.3
6.6
66
666
933
6666
66666
100000
133333
Traceable® pH Standards,
ndards, Certifieed Reference
ference Mater
Material
The MOST accurate pH Standards
d d available
il bl anywhere
Traceable® pH Standards, Certified Reference Materials, are 100% compatible with all
instruments and probes. Accuracy for the Traceable ® Buffer at 25°C is ±0.010 pH—the most
precise available. Certified Reference Materials meet Federal/State/local agencies’ strictest
mandates and deliver exact calibration results for any pH meter.
Certification documentation supplied for every Traceable®
Certified Reference Material
A2LA ISO 17025 (Calibration Laboratory) and ISO Guide 34 (Certified Reference Material
Producer) provide highest achievable levels of product production, documentation, and accuracy.
Additional accreditations include ISO 31 (content) and ISO 35 (statistical analysis). ISO 9001
ensures that world-class product standards for Materials are always met.
Select values are manufactured to IUPAC (International Union of Pure and
Applied Chemistry) formulation. All Certified Reference Materials feature
resistance to temperature changes and long-term buffer stability. To assure
accuracy an individually serial-numbered Traceable ® Certificate is supplied
to indicate traceability to standards provided by NIST (National Institute of
Standards and Technology) and/or a National Standards Laboratory.
Traceable® pH Standards Certified Reference Material
Size
Cat. No.
pH Value
4280
4.005
4281
7.000
4286
7.416
4282
10.012
4287
4.005
4288
7.000
4285
7.416
4289
10.012
473 ml Bottle
Each 16 ounce bottle is supplied with an individual temperature compensation
chart, traceability information, and Traceable ® Certificate.
100 ml One-Shot™
(pk of 6)
Workstation Spilltray™ and Drying Rack
Eliminate spills with this chemical-resistant, maintenance-free, polyethylene
containment tray. Use one at each workstation or fumehood to safely handle
chemicals and liquids while pipeting, measuring, or mixing. Holds 1¼ liters of
spilled liquid. Easy to clean—simply lift off the white grid and empty.
Low profile design is perfect for drying glassware and delicate items. Plastic grid
cushions and protects against breakage and scratches. Grid cuts drying time in
half by permitting air circulation. Easel permits drying odd shaped items. Entire
unit is dishwasher safe. Tray folds up to 43/8 inches creating an incline of 45
degrees. Size: 16½ x 13 x 5/8 inches. Weight: 1 pound.
Description
Cat. No.
Spilltray and Drying Rack
3450
™
95
Traceable® Dissolved Oxygen Meter
Simultaneously displays oxygen concentration and temperature. Computer output allows it to
be connected to a computer or data logger for monitoring and keeping results. Jumbo-size
digits are 13/8 inches high. At the touch of a key the instrument recalls highest, lowest, and
average readings. A DATA HOLD key freezes the display to capture readings.
To assure accuracy an individually serial-numbered Traceable ® Certificate is
supplied to indicate traceability to standards provided by NIST (National Institute of
Standards and Technology). Supplied: probe, 40-inch cable, two replacement probe
heads, electrolyte solution, 9-volt alkaline battery, computer output, carrying case,
Traceable® Certificate. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
Description
Range
Resolution
Accuracy
Dissolved oxygen
measurement
0.00 to 20.00 mg/L
0.1 mg/L
±0.4 mg/L
DO measurement
% air saturation
0.00 to 100%
air saturation
0.1%
±0.7% mg/L
Temperature
measurement
32.0 to 140°F/
0.0 to 60°C
0.1°
±1.5°F/0.8°C
Automatic temperature
compensation
mg/l mode: 0.0 to 60.0°C, % air mode:
0.0 to 60.0°C
Salinity compensation
0 to 39%
Altitude compensation
0 to 3900 m
Description
Cat. No.
Traceable® Dissolved Oxygen Meter
4320
Data Acquisition System (complete description on page 103)
4136
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
Traceable® Dissolved Oxygen Meter Pen
Compact, rugged design
Tough ABS plastic case and water-resistant design with O-ring seal and membrane keypad assures a long
life in severe lab or harsh plant environments. HOLD key freezes the reading on the display. High contrast,
easy to read 3/8 -inch high LCD digits simultaneously display oxygen concentration and temperature. At
the press of a key, unit recalls minimum/maximum readings. Designed for intuitive, easy operation by
everyone.
Traceable to NIST
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO
17025 calibration laboratory. It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Rugged ABS plastic case is 1½ diameter x 8 inches; weight is 5 ounces.
Supplied with a Traceable® Certificate, two spare probe heads with membranes, electrolyte solution, nylon
carry case, and four batteries.
96
Description
Cat. No.
Traceable® Dissolved Oxygen Meter Pen
4319
Description
Range
Resolution
Accuracy
Dissolved oxygen measurement
0.0 to 20.0 mg/l
0.1 mg/l
±0.4 mg/l
Dissolved oxygen measurement % air saturation
0.0 to 100% air saturation
0.1%
±0.7% mg/l
Temperature measurement
32.0 to 122°F/0.0 to 50°C
0.1°
±1.5°F/0.8°C
Automatic temperature compensation
0.0 to 50.0°C
Traceable® Light Meter Pen
Dual range and easy operation
Meter reads from 0 to 1,860 foot-candles with a resolution of 0.1, and from 0 to 20,000 Lux with a
resolution of 1. Accuracy is ±5% of reading plus 5. Simple operation eliminates the need to refer to
instructions. Designed for intuitive, easy operation by everyone. Tough, ABS plastic case with O-ring
seal and membrane keypad keep out dust and dirt, assuring a long life in severe lab or harsh plant
environments. HOLD key freezes the reading on the display. High contrast 3/8 -inch-high LCD digits
are easy to read.
Traceable to NIST
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). Rugged ABS plastic case is 1½ diameter x 8
inches; Weight: 5 ounces. Supplied: Traceable® Certificate and four batteries.
Description
Cat. No.
Traceable Light Meter Pen
3247
®
Traceable® Dual-Range Light Meter
Dual-Range Meter reads both lux and foot-candles on a large ½-inch-high display.
An analog output of 0.1 millivolt per digit allows readings to be captured by a
recorder. Precision selenium photovoltaic cells and microprocessor provide for a
fast-response sampling rate of 0.4 seconds and an automatic zero adjustment.
Display update rate may be set to 1 or 2 seconds. To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration
laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology). HOLD key freezes the
display to capture readings. Precise photodiode and color-correction filter provide
cosine- and color-corrected measurements.
Readings in lux and foot-candles
Dual-Range Meter measures lux in three ranges: 0 to 1999 (1 lux
resolution), 2000 to 19,990 (10 lux resolution), and 20,000 to 50,000
(100 lux resolution). Readings in foot-candles: 0 to 199.9 (0.1 Fc
resolution), 200 to 1999 (1 Fc resolution), 2000 to 5000 (10 Fc
resolution). For accuracy see chart. Unit is supplied with 2 inch diameter
photocell, 40-inch cable, Traceable® Certificate, 9-volt alkaline battery,
and recorder output. Size: 6½ x 3 x 1½ inches. Weight: 10 ounces.
Range
Resolution
Lux
Description
Traceable® Dual-Range Light Meter
Cat. No.
3251
Accuracy
0 to 1999 lux
1 lux
±5% reading + 10 lux
2000 to 19,999 lux
10 lux
±5% reading + 100 lux
20,000 to 50,000 lux
100 lux
±5% reading + 100 lux
0 to 199.9 Fc
Foot- 200 to 1999 Fc
Candles
2000 to 5000 Fc
0.1 Fc
±5% reading + 1 Fc
1 Fc
±5% reading + 10 Fc
10 Fc
±5% reading + 100 Fc
97
Traceable® Dual-Display Light Meter
Dual displays show lux or foot-candles, or percent differential from a reference point, and the selected
ted light
ig source (daylight,
(day ght,
tungsten, fluorescent, or mercury). Traceable ® light meter has computer output that allows it to be connected
o
onnected
to a data logger for
monitoring and keeping results. To assure accuracy an individually serial-numbered Traceable® Certifi
r cate is provided from our
rtifi
ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology).
Readings in lux and foot-candles
Dual-Display Meter measures lux in three ranges: 0 to 1999 (1 lux resolution), 2000 to 19,990
(10 lux resolution), and 20,000 to 50,000 (100 lux resolution). Readings in foot-candles: 0 to 199.9
(0.1 Fc resolution), 200 to 1,999 (1 Fc resolution), 2,000 to 5,000 (10 Fc resolution).
For accuracy see chart. Unit has zero reference settings for all light sources.
Unit recalls highest, lowest, and average readings at the touch of a key. HOLD key
freezes the display to capture readings. Precise photodiode and color-correction
filter provide cosine- and color-corrected measurements. Jumbo-sized digits are
13/8 inches high. Supplied: 2-inch diameter photocell, Traceable® Certificate,
battery, and computer output. Probe: 2-inch diameter photo cell/40-inch
cable length. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
Range
Resolution
Lux
Accuracy
0 to 1999 lux
1 lux
±4.5% full scale
2000 to 19,999 lux
10 lux
±4.5% full scale
20,000 to 50,000 lux
100 lux
±4.5% full scale
0 to 199.9 Fc
Foot- 200 to 1999 Fc
Candles
2000 to 5000 Fc
0.1 Fc
±4.5% full scale
1 Fc
±4.5% full scale
10 Fc
±4.5% full scale
Description
Cat. No.
Traceable Dual-Display Light Meter
3252
Data Acquisition System (complete description on page 103)
4136
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
®
Traceable® Ultraviolet Light Meter
Light meter has an UV wavelength range of 320 to 390 nm. Traceable ® Ultraviolet Light Meter
ter
measures on three different ranges from 0 to 199.9 μW/cm2 (resolution 0.1 μW/cm2), 1.999 mW/
mW
W/
cm2 (resolution 0.001 mW/cm2), and 19.99 mW/cm2 (resolution 0.01 mW/cm2). Accuracy is ±(2%
%
of full scale plus 2 digits).
Connect to computer or data logger
Traceable® Light Meter has computer output that allows it to be connected to a data
logger for monitoring and keeping results. To assure accuracy an individually serialnumbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology).
Cosine- and color-correct measurements
Unit recalls highest, lowest, and average readings at the touch of a key. HOLD key
freezes the display to capture readings. Precise photodiode and color-correction
filter provide cosine- and color-corrected measurements. Supplied: ¾-inch diameter
photocell (40-inch cable), Traceable® Certificate, alkaline battery, computer output,
carrying case. Size: 7 x 3 x 1¼ inches. Weight: 9½ ounces.
98
Range
Resolution
Accuracy
Description
Cat. No.
0 to 199.9 μW/cm2
0.1 μW/cm2
±4 μW/cm2 + 1 μW/cm2
Traceable® Ultraviolet Light Meter
3253
200 to 1.999 mW/cm2
0.001 mW/cm2
±0.04 mW/cm2 + 0.01mW/cm2
Data Acquisition System (complete description on page 103)
4136
2.00 to 19.99 mW/cm2
0.01 mW/cm2
±0.4 mW/cm2 + 0.1 mW/cm2
Data Logger (complete description on page 102)
4325
Universal Wireless Radio-Signal Transceivers
(complete description on page 103)
7085
Traceable® Pocket Digital Light Meter
Traceab
Meter reads from
fro 0 to 1,999 foot-candles (resolution 0.1 to 1). Bright ½-inch-high digits make it
an easy to read pocket light meter. The simplicity of the two-key operation eliminates the need
to refer to instructions.
instru
Functions are on/off and range. The meter can be zeroed with the simple
turn of an adjustment
adjus
screw.
Traceable to NIST for accuracy
To assure accur
accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate
traceability to standards
sta
provided by NIST (National Institute of Standards and Technology). Unit
is supplied with flip-open stand and 9-volt battery. Sensor features a 40 inch long lead and
measures 2¾ x 3¼ x ¾ inches. Size: 2¾ x 5¼ x 1 inches, weight is 6½ ounces.
Description
Cat. No.
Traceable Pocket Digital Light Meter
3248
®
Range
Resolution
Accuracy
0 to 199.9 Fc
0.1 to 1 Fc
(±5% full scale + 4)
200 to 1,999 Fc
0.001 Fc
(±5% full scale + 4)
Traceable® Sound Level Meter
Three-decibel ranges
Features three-decibel ranges for greater precision: low (35.0 to 80.0 dB), medium (50.0 to 100.0 dB), and high
(80.0 to 130.0 dB). Resolution is 0.1 dB and accuracy is ±2 dB. Unit provides weightings for both A (frequencies for
500 to 10 kilohertz) and C (frequencies from 30 to 10 kilohertz) to meet IEC 651 Type-2 standards.
Adjustable response time
Response time may be set to fast (0.2 seconds) or slow (1.5 seconds). A handy memory data-hold function
stores the highest reading achieved for later display. It fulfills OSHA requirements. Unit uses a ½-inch condenser
microphone. A recorder jack permits capturing readings (AC and DC 10 mV/dB). Use the threaded tripod insert for
long-term measurements. To assure accuracy an individually serial-numbered Traceable ® Certificate is supplied
to indicate traceability to standards provided by NIST (National Institute of Standards and Technology). Unit is
supplied with 9-volt alkaline battery and carrying case. Size: 10 x 3 x 1 inches. Weight: 9½ ounces.
Description
Cat. No.
Traceable® Sound Level Meter
4335
Traceable® Analog Sound Meter
Easy-to-operate, Traceable® Analog Sound Meter provides fast readings on a colorcoded scale. It quickly indicates over and under decibel readings. Measures from
54 to 126 decibels in seven ranges 60, 70, 80, 90, 100, 110, 120 dB. Switch permits
weightings for either A (frequencies from 500 hertz to 10 kilohertz) or C (frequencies
from 30 hertz to 10 kilohertz). Accuracy is ±3dB. Features include: analog output for
connecting to chart recorders, maximum key for locking on highest reading for peak
sounds, and switch for selecting fast or slow response.
To assure accuracy an individually serial numbered Traceable ® Certificate is supplied to indicate
traceability to standards provided by NIST (National Institute of Standards and Technology). Unit is
supplied with 9-volt alkaline battery, low battery checker, threaded insert for tripod, and Traceable ®
Certificate. Size: 2½ x 7 x 1½ inches. Weight: 5½ ounces.
Description
Cat. No.
Traceable Analog Sound Meter
4336
®
99
Traceable® Digital Laser Tachometer
Touchless, no contact operation is safe and easy. Tachometer measures revolutions per minute
with laser pin-point accuracy anywhere from two to seventy-eight inches away from any rotating
object. Labs and plants use this high accuracy unit to read speeds of centrifuges, motors, and
stirrers. Five digit LCD is a highly visible 3/8 -inch-high. Laser beam reflects off self-adhesive
tabs to give readings of 10 to 99,999 revolutions per minute. Resolution is 0.1 below 1000 and 1
above. Accuracy is ±1 RPM or 0.05%.
Traceable to NIST for accuracy
Utilizes a precision quartz-crystal for an accurate time base. To assure accuracy an individually
serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory
accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute
of Standards and Technology). Takes only a second for most readings. Memory feature permits
recalling last reading at any time.
Supplied: Traceable® Certificate, four alkaline batteries, rugged ABS plastic case, self-adhesive
reflecting tabs, internal light, carrying case. Size: 3 x 8¼ x 1½ inches. Weight: 9¾ ounces.
Description
Cat. No.
Traceable Digital Laser Tachometer
4060
®
Traceable® Touchless/Contact Digital Tachometer
Traceabl
Labs use this high-accuracy unit to check speeds of centrifuges, motors, or stirrers. Five digit LCD
is ½-inch high. Tachometer takes only three
thre seconds for most readings. A unique memory feature
permits recalling the highest, lowest, and last reading. Unit is extremely easy to use; operation may
be learned in one minute. One end of the unit provides contact readings with a rotating spindle.
The other end makes touchless readings
reading using a beam of light. The light may be held as far away
as twelve inches. The light beam reflects
ec off self-adhesive tabs to provide readings of 0.1 to 99,999
revolutions per minute (RPM). The co
contact end of the instrument measures speeds of 0.1 to 19,999
revolutions per minute, 0.05 to 1999.
1999.9 meters per minute, and 0.2 to 6560 feet per minute. Resolution
in all modes is 0.1 below 1000 and 1 above 1000. For accuracy see chart. Utilizes a precision quartzcrystal for an accurate time base. TTo assure accuracy an individually serial-numbered Traceable ®
Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates
traceability to standards provided by NIST (National Institute of Standards and Technology).
Supplied: batteries, Traceable® Certifi
C
cate, rugged ABS plastic case, self-adhesive reflecting tabs,
internal light, cone for RPM, wheel
wh for RPM, wheel for surface speeds, carrying case. Size: 2½ x 8½ x
1½. Weight: 10½ ounces.
100
Description
Cat. No.
Traceable® Touchless/Contact Tachometer
4059
Range
R
Resolution
Accuracy
0 to 999.9 RPM
0.1 RPM
±0.05% of reading + 0.1 RPM
1000.00 to 99999 RPM
1 RPM
±0.05% of reading + 1 RPM
Traceable® Tachometer with Red LED Pointer
Touchless handheld point-and-shoot tachometer targets a rotating object and
provides instant precision results
Optical no-contact measurements are made by placing a piece of reflective tape on the rotating object.
Red LED light locks on the self-adhesive reflective tape (24” supplied) and counts rotations. In two
seconds it provides rock solid answers from 10 to 99,999 revolutions per minute (RPM). Five-digit
resolution is 0.001, 0.01, 0.1, or 1 depending on the revolutions displayed.
Quartz-crystal accuracy
Unit is designed to measure centrifuges, pumps, rollers, shafts, gears, motors, and moving surfaces. For
accuracy see chart. HOLD key freezes display. Precision quartz-crystal insures stable and repeatable
results. LCD digits are ½-inch-high and may be read from 10 feet. Low battery condition is indicated on
the display. Impact-resistant ABS case protects the unit.
To assure accuracy an individually serial-numbered Traceable ® Certificate is provided from our ISO
17025 calibration laboratory. It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Supplied: battery. Size: 4¾ x 1¾ x 1¼ inches. Weight: 4 ounces.
Description
Cat. No.
Traceable Tachometer with Red LED Pointer
4262
®
Range
Resolution
Accuracy
10 to 99.99 RPM
0.001 RPM
±0.04% of reading + 0.02 RPM
100.00 to 999.99 RPM
0.01 RPM
±0.04% of reading + 0.2 RPM
1000.00 to 9999.99 RPM
0.1 RPM
±0.04% of reading + 2 RPM
10000 to 99999 RPM
1 RPM
±0.04% of reading + 22 RPM
Traceable® Contact Tachometer
Any rotating surface may be touched by the cone convex tip, funnel
concave tip, or speed wheel for instant results
Tachometer displays revolutions per minute (RPM) from 10.000 to 99,999 (resolution 0.001,
0.01, 0.1, 1). In addition, it reports results in feet per minute 3.0000 to 30,000, yards per
minute 1.000 to 10,000, and meters per minute 1.000 to 9999.9 (resolution for all three is
0.0001, 0.001, 0.01, 0.1 depending on the revolutions displayed).
Unit is designed to measure centrifuges, pumps, rollers, shafts, gears, motors, and moving
surfaces. For accuracy, see chart. HOLD key freezes reading. Precision quartz-crystal
insures stable and repeatable results. Short sampling time provides answers in two
seconds. LCD digits are ½-inch-high and may be read from 10 feet. Low battery condition
is indicated on the display. Impact resistant ABS plastic case protects the unit.
To assure accuracy an individually serial-numbered Traceable ® Certificate is supplied to
indicate traceability to standards provided by NIST (National Institute of Standards and
Technology). Supplied with a 9-volt battery. Size: 4¾ x 1¾ x 1¼ inches. Weight: 4 ounces.
Description
Cat. No.
Traceable Contact Tachometer
4261
®
Range
Resolution
Accuracy
10.000 to 99.999 RPM
0.001 RPM
±0.04% of reading + 0.01 RPM
100.00 to 999.99 RPM
0.01 RPM
±0.04% of reading + 0.1 RPM
1000.0 to 9999.9 RPM
0.1 RPM
±0.04% of reading + 1 RPM
10000 to 99999 RPM
1 RPM
±0.04% of reading + 10 RPM
101
Traceable® Digital Auto-Range Multimeter
Designed specifically for checking the electrical functions of scientific equipment in laboratories.
Perfect unit to test batteries, fuses, recorder outputs, cables, wall plugs, probes, printed circuit
boards, and complex electronic instrumentation. Save money and time by solving problems
and eliminating costly repairs. Unit ranges are from 1 millivolt to 400 volts AC/DC and 0.1 to
2,000,000 ohms. Accuracy is 2 units, or 2% of the reading. The multimeter instantly displays the
correct answer by automatically selecting the proper range. Four-digit, 3/8 -inch-high LCD shows
the exact resistance or voltage unit and indicates negative polarity with a minus sign.
To assure accuracy an individually serial-numbered Traceable ® Certificate is supplied to indicate
traceability to standards provided by NIST (National Institute of Standards and Technology).
Features an audible beep for checking continuity, ensuring instant detection of shorts/opens
in probes, cables, or circuit boards. Sampling rate is twice a second. Intuitive operation makes
instructions almost unnecessary. Supplied: case, batteries, pair of needle probes, pair of
alligator probes, instructions. Size: 21/8 x 4¼ x ½ inches. Weight: 3 ounces.
Description
Cat. No.
Traceable® Digital Auto-Range Multimeter
3250
Traceable® Battery Tester
Traceable® Battery Tester checks alkaline, carbon, silver-oxide, mercury, nickel-cadmium,
and other batteries. Tests battery voltages from 1.35 to 12 volts on 13 ranges. Accuracy is
±5%. Simple color-coded scale immediately indicates battery condition. Individually serialnumbered Traceable® Certificate is provided to indicate traceability to standards provided by
NIST (National Institute of Standards and Technology).
Actually tests the battery
Provides true resistive load readings equal to real-world usage. Tests batteries under actual
operating conditions. Twenty-six precision resistors provide true representative loads for all
batteries. Superior to voltmeters that provide no-load values.
Requires no internal battery
Pays for itself by eliminating battery replacements. Self-powered; requires no internal
battery. Checks any battery in one second. Gold-plated printed circuit board and silver-plated
switches ensure both accuracy and a long life. Small (3½ x 2½ x 1-inch) and lightweight (3
oz) unit comes with two test leads (27½-inch-long cables), Traceable ® Certificate.
Description
Cat. No.
Traceable Battery Tester
3410
®
Data Logger
Accessory Data Logger
Complete DAS–4™ System captures and stores up to 8000 bytes
(over 1000 readings). Readings may be taken at intervals from 1
second to 99 hours. Stored readings may be downloaded to any
PC and viewed. Can be read as-is or imported to spreadsheets,
databases, and statistical programs. Includes Windows CD, and
a 3-foot cable (supplied USB, serial, and instrument connections).
Cable plugs into instrument and computer. Four alkaline batteries
supplied. Size: 5 x 3 x 1 inches. Weight: 7 ounces. For use with
Traceable® Meters featuring computer output.
102
Description
Cat. No.
Data Logger
4235
Use this Data Logger
with the following
Cat. No.
Page No.
4137
36
4315
40
4189
75
4330
80
3165
87
3166
87
4169
91
4310
87
Universal Wireless
Radio-Signal Transceivers
Wireless radio transceivers send results from Traceable®
instruments to a computer 300 feet away, without cables.
Send readings from Traceable® thermometers, hygrometers,
barometers, light meters, anemometers, manometers,
dissolved oxygen meters, conductivity meters and more directlyy
to your computer. Audible/visual notification alarms are
sent instantly. Supplied: both serial and USB user selectable
Wireless
connections for the computer. Works with Windows®
Transceiver
98/Me/NT/2000/XP/Vista/Windows 7. Plug and play units
are preconfigured for out-of-the-box use, no software is
used. Entire setup takes less than two minutes. Units work where there is other wireless equipment, in harsh industrial areas with electrical
noise,and indoor or outdoor locations. Signal penetrates walls. Supplied complete with power supply, antennas, serial and USB connections.
Description
Universal Wireless Radio-Signal Transceivers
Cat. No.
Accessories Description
Cat. No.
7085
USB Extension Cable (150 feet long)
7084
Serial Extension Cable (50 feet long)
7791
Data Acquisition System
Powerful, new software technology allows up to eight unique Traceable® meters to simultaneously capture
data and stream it directly (or via e-mail) to any iPhone®, Blackberry®, or computer. Easily keeps track of
results for thermometers, hygrometers, barometers, light meters, anemometers, manometers, dissolved
oxygen, conductivity, and more. Every minute—or any pre-set time increment—data is captured and stored.
Readings are saved to a file that can be viewed, printed as-is, or merged in a report or spreadsheet format.
Data continues to be collected in the background even when user works on other software programs.
Networking server/client capability allows data to be monitored on a remote workstation. 24/7 audible/visual
alarms remind user to check on data. This significant technology breakthrough easily installs in less than
two minutes—the cable is simply connect to the meter and to a USB port (or serial port) and data capturing
begins. Designed to work with Windows® 98/Me/NT/2000/XP/Vista/Windows 7. Supplied with software: CD,
6-foot cable (USB, serial, and meter connections). Multiple extensions expand cable length to 300 feet.
Use this software and/or wireless transceiver with the following products:
Data Acquisition
System Cat. No.
Product Description
4136
Traceable® Pressure/Vacuum Gauge
87
3165/3166
4136
Traceable® Dual-Display Light Meter
98
3252
4136
Traceable® Ultraviolet Light Meter
98
3253
8045
Traceable® Manometer/Pressure/Vacuum Gauges
86
3460/64
4235
Traceable® Digital Thermometer
4
4000/4005
4237
Traceable® Memory Wide-Range Thermometer
33
4007
4099
Traceable® Humidity/Temperature/Dew Point Meter
74
4080/4085
4237
Traceable® General-Purpose Hygrometer/Thermometer
71
4087
4136
Traceable® RTD Platinum Thermometer
5
4132
4136
Traceable® Double Thermometer
36
4137
4136
Traceable® Dual-Display Conductivity Meter
91
4169
4136
Traceable® Humidity/Thermometer
75
4189
4136
Traceable® Moisture Meter
87
4310
4136
Traceable® Infrared Digital Thermometer
40
4315
4136
Traceable® Dissolved Oxygen Meter
96
4320
4136
Traceable® Hot Wire Anemometer/Thermometer
80
4330
4237
Traceable® Anemometer/Thermometer
81
4331
8045
Traceable® Expanded Range Conductivity Meter
90
4360
8045
Traceable® Memory Hygrometer/Thermometer
75
4385
Page No.
Product Cat. No.
103
Variable-Speed Peristaltic Tubing Pump
Compact, variable-flow, bi-directional, self-priming, peristaltic pumps offer
precise flow deliveries. Ideal for use with conductivity flow-thru cells, liquid
chromatography, collecting fractions, pH/circulating fluids or buffers in baths,
and moving corrosive materials. They provide outstanding flow control and
flexibility for transferring and dosing liquids. Fluid contacts only the tubing for
contamination-free pumping.
Flow rates are from 0.005 milliliters per minute to 600 milliliters per minute.
Variable-speed flow control and five different tubing sizes provide fine
resolution with a wide flow range. The revolution of one roller delivers a
precisely measured volume specific to the tubing size and motor speed. May
be used with up to 120 feet of tubing for remote sampling.
Tubing may be used with fluid temperatures from –80 to 500°F (–62 to
260°C). Use with food, pharmaceuticals, and other critical solutions. The
tubing may be sterilized by autoclave. Unit pumps liquids and gases. Pumping dry does not harm the pump. Pump has a purge/prime switch
for high-speed emptying/filling. It also reverses at the touch of a switch for ease in draining tubing. Three rollers reduce flow pulsation,
prevent siphoning, and eliminate the need for check valves. There are no valves to clog, no seals to leak. The 120 VAC CSA-approved
wall power supply ensures that a safe 12 volts drive the pump motor. Comes with a battery connector for portable use with any 9 or 12-volt
battery. Pump draws so little power it will run for five months on a car battery.
Supplied with silicone tubing, and polypropylene fittings/nipples, 115 VAC wall power supply, and an accessory battery connector (battery not
supplied). Packaged in a chemical-resistant ABS plastic case. Size: 65/8 x 4¾ x 4½ inches. Weight: 1¼ pounds. One-year warranty.
Description
Cat. No.
Variable-Speed Peristaltic Tubing Pump— Ultra-Low Flow 0.005 to 0.900 ml/minute
3384
Variable-Speed Peristaltic Tubing Pump— Low Flow 0.03 to 8.20 ml/minute
3385
Variable-Speed Peristaltic Tubing Pump— Medium Flow 0.4 to 85.0 ml/minute
3386
Variable-Speed Peristaltic Tubing Pump— Medium/High Flow 4.0 to 600 ml/minute
3389
Variable-Flow Chemical
Transfer Pump
Designed specifically for pulseless fluid transfer at variable flow rates.
Pumps from 4¼ fluid ounces to 5/8 gallon (120 to 2,250 milliliters) per
minute. Pumps fluids with a viscosity to 200 centipoises. Suction lift
is 10 feet wet, 4 inches dry. May be used with fluid temperatures from
–40 to 200°F (–40 to 93°C). Barbed inlet/outlet ports use any type of
tubing with an inside diameter (nominal 3/16 inches).
Direct-drive engineering provides maximum motor power to the
pump. Continuous-sweep variable control provides precise, seamless
speed control. The chemical-resistant, wetted parts are Dupont
Delrin®, 304 stainless-steel, Viton, and PTFE. Pump has a purge/
prime switch for high-speed emptying/filling. It also reverses for
ease in draining tubing. May be used with up to 120 feet of tubing for
remote sampling. Pump comes ready to use with 115 VAC UL-rated
wall power supply. Case is chemical-resistant ABS plastic. Size: 8 x
4¾ x 4¾ inches. Weight: 3¼ pounds.
104
Description
Cat. No.
Variable-Flow Chemical Transfer Pump
3388
Traceable® Ultra-Low Flow Meterr
Compact, fully contained, ready to operate, no assembly required.
equired.
Ready to run right out of the box. Simple 4-key operation (Flow/
Flow
w/
Total, Units, Zero and Power) and easy to read LCD make thiss
meter extremely user-friendly. Display shows the current flow and
total accumulated flow.
Accuracy is ±2% full scale with liquid temperatures of 20
to 30°C; otherwise, ±4% full scale. May be used with fluid
temperatures from 32 to 122°F (0 to 50°C). Unit permits
adjusting a viscosity compensation correction. Chemically
resistant nylon 1/16 barbed inlet/outlet connectors are
compatible with all types of tubing.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable
ablee®
Certificate is provided from our ISO 17025 calibration laboratory
ory
accredited by A2LA. It indicates traceability to standards provided
by NIST (National Institute of Standards and Technology). Supplied: wall power adaptor and a battery connector for portable use.
Meter draws so little power it will run for six months on a car battery. Case is constructed of chemical-resistant ABS plastic. Size:
65/8 x 4¾ x 4½ inches. Weight: 1 pound. One-year warranty.
Description
Cat. No.
Traceable® Ultra-Low Flow Meter
3500
FLOW
TOTAL
FLOW
Displays flow rates and total flow of fluids in seven
user selectable units of measure:
Range
Resolution
Unit
4 to 30.00
0.01
milliliters/minute
0.004 to 0.030
0.0001
liters/minute
4.00 to 30.00
0.01
cubic centimeters/minute
0.135 to 1.01
0.01
fluid ounces/minute
0.001050 to 0.00742
0.00001
gallons/minute
0.140 to 1.05
0.01
fluid imperial ounces/minute
0.00088 to 0.00659
0.00001
imperial gallons/minute
Standard Check Valves
Chemical-resistant check valves
Tubing barbed check valves are constructed of chemical-resistant Kynar ® body and Viton®
valve for an inert, high-purity, smooth and clear flow path. Prevents damage to equipment,
pumps, and flow systems by preventing backflow. Use with acids, bases, water, chemical
processing, and alcohols. Use for liquids, gases, pressure, and vacuum applications.
Operating ranges are 0 to 50 PSI and –40 to 126°C. Autoclavable, zero maintenance, unit
installs in any position.
Description
Qty.
Use Tubing
I.D. size
Overall
Size
Cat. No.
Chemical-Resistant Check Valve
6/pk
18
/ -inch
1¼-inch
3295
Chemical-Resistant Check Valve
6/pk
3 16
/ -inch
1¼-inch
3296
Chemical-Resistant Check Valve
6/pk
¼-inch
1¼-inch
3297
Chemical-Resistant Check Valve
6/pk
38
/ -inch
1¼-inch
3298
105
Hose/Tubing Clamps
Hose/Tubing Clamp Assortment Kit
Eliminate leaks
Clamps securely fasten tubing to connectors, pumps, glassware, and filtration units.
Chemical-corrosion-resistant, rustproof, non-conducting nylon is ideal for use in wide
temperature range of 32 to 194°F (0 to 90°C).
May be sterilized
One-piece, reusable clamp squeezes shut for a leak-proof seal. Pressing on the
side releases the clamp. Designed specifically for pressure, vacuum, and liquid
applications where a secure seal is required. Tight-Seal™ is the only clamp that works
with all types of plastic and rubber tubing. May be chemically or gas-sterilized for
biomedical or food applications. Available in 13 sizes, clamps have an inside diameter
of ¼ to 15/8 inches (6.25 to 40.90 mm). Assortment includes 65 clamps, 5 of each of
the 13 sizes. Handy kit ensures that the proper size immediately available.
Description
Cat. No.
Hose/Tubing Clamp Assortment Kit
3280
Cat. No.
Inside Clamp Diameter
Pack of 100
Inches
Millimeters
3261
0.246 to 0.290
6.25 to 7.37
3262
0.360 to 0.406
9.14 to 10.31
3263
0.410 to 0.468
10.41 to 11.89
3264
0.475 to 0.536
12.07 to 13.61
3265
0.538 to 0.608
13.67 to 15.44
3266
0.597 to 0.665
15.16 to 16.89
3267
0.670 to 0.780
17.02 to 19.81
3268
0.730 to 0.830
18.54 to 21.08
3269
0.870 to 0.975
22.10 to 24.77
3270
0.953 to 1.093
24.21 to 27.76
3271
1.031 to 1.187
26.21 to 30.15
3272
1.250 to 1.425
31.75 to 36.20
3273
1.406 to 1.610
35.71 to 40.90
Tight-Ties™ Assortment Kit
Cable ties feature a unique tapered tip for fast insertion and tightening. One-piece, selflocking ties are made of tough, chemical-corrosion-resistant, rustproof, non-conducting
nylon. Applications include affixing tubing to pumps, bundling materials, hanging equipment.
Usable in wide temperature range
Use in the wide temperature range of –40 to 185°F (–40 to 85°C). Tensile strength is 12 to
50 pounds. When fastened, the diameters adjust 5/32 to 4 inches (2.60 to 101.60 mm).
Description
Tight-Ties Assortment Kit
™
Includes 400 including five sizes.
Cat. No.
3258
Dust-It™ Blower
Powerful bulb duster forcibly blows away dust, lint, and dirt. It provides high-pressure, pinpoint
jets of air exactly where desired. Varying the squeeze provides for controlled delivery. One-way
inlet valve at the top stops air/dust from being drawn through the tip. Non-conductive plastic
sleeve-tip prevents scratches and permits cleaning optical lenses, slides, circuit boards, and
cuvettes. It’s ideal for delicate, difficult-to-clean, and inaccessible equipment. Dust’it™ provides
the best environmentally safe solution. Size: 2¼ diameter x 5 inches. Weight: 2 ounces.
106
Description
Cat. No.
Dust-It™ Blower
3119
Electrode Holder
Pays for itself by speeding up batch sampling and reducing probe breakage. NASA Spacee Shuttle
engineering assures smooth and effortless operation. Performs like a robot arm in zero
ero gravity.
grravity.
Ideal for multiple conductivity or pH readings
Fingertip control raises, lowers, and pivots (360 degrees) the perfectly balanced
electrode holder wherever desired. Moves in all directions; holds electrodes safely and
nd
securely in any selected position. Electrode arm articulates at three points so electrodes
des
always remain vertical.
Accepts all brands
It is designed to accept any standard glass, reference, combination or other electrode—
e—
or conductivity probe, and a temperature probe. Three openings allow holder to simul-ltaneously accept two electrodes and one temperature probe. Weighted die-cast metal
al
base and spring counterbalance permit fluid movement with superior stability. Complete
ete
with 21-inch metal arm, 8-inch diameter. Weight: 6 pounds.
Description
Cat. No.
Electrode Holder
3090
Arm extends
to 21 inches
Ultra-Clean™
Supremium
Aluminum Foil
Premium Ultra-Clean™ pure aluminum foil is manufactured specifically for the
lab with added strength and puncture resistance. Highly versatile material
can withstand extreme heat and cold. Ultra-Clean™ aluminum foil purity helps
maintain the integrity of samples. The rolls achieve the lowest moisturevapor transfer rate of all wrapping materials. The carton has a metal tear-off
bar for ease in cutting to size. Unique box flaps prevent the roll from leaving
the box. AL-Lab-Pop-Ups™ are individual sheets of foil. Timesaving one-at-atime single sheet pop-up requires no cutting or tearing. Sheets are ideal for
covering flasks, beakers, and petri dishes.
Clear Plastic Lab Wrap
Tight seal
Wrap is designed specifically for the lab with low-tangle
properties to insure that it doesn’t ball up when handled. It
also has high-cling properties to enable wrapping a beaker,
flask, or petri dish with an extraordinary tight seal that stays
in place. The clarity of the film allows you to see through it.
The distinctive proprietary formulation yields ultra-clean film to
ensure sample purity and eliminate contamination. It is made of
100% polyethylene.
Cat. No.
Type
Dimensions
Thickness
Unit Package
Case qty
3540
3541
3542
3543
3544
3545
roll
12" x 25'
regular
each
12 each
roll
12" x 75'
regular
each
12 each
roll
12" x 200'
regular
each
12 each
roll
18" x 25'
heavy-duty
each
12 each
roll
18" x 50'
heavy-duty
each
12 each
roll
18" x 25'
extra heavy-duty
each
12 each
Description
Cat. No.
3546
pop-ups
9" x 10¾"
regular
200 sheets
12 each
Clear Plastic Lab Wrap
3470
The carton has a metal tear-off bar for ease in achieving the
exact size needed. The carton also has unique flaps which
prevents the roll from leaving the box. Plastic wrap Size: 12
inches wide by 100 feet long.
107
Cheesecloth Wipes
Reagent-grade quality
New wipes are certified to be 100% pure cotton of reagent-grade quality and
purity. They meet all lab requirements for cleanliness, softness, absorbency,
and strength. Cheesecloth Wipes absorb 6 times their own weight of both
solvents and aqueous solutions. They never scratch surfaces or fall apart.
Clean any optical grade surface
Use them to wipe cuvettes and microscopes, clean cameras, and dry delicate
glassware, syringes, pipettes, and pH electrodes. Because they are inert to
even harsh solvents, they are ideal as a filtering material. Certified Cheesecloth
Wipes meet cleanliness specifications of USP (United States Pharmacopoeia)
and Federal Specification CCC-G-101c. Individually dispensed wipes
eliminate time-consuming cutting of bolts of cloth and the dust, dirt, and waste
associated with handling difficult-to-store rolls.
Description
Standard Cheesecloth Wipes
Brilliant white, 9-inch-square pad (8-ply) unfolds to approximately
18 x 36 inch, 60/dispenser box (pictured left)
Cheesecloth Mini-Wipes
Brilliant white, 4-inch-square pad (8-ply) unfolds to approximately
7 x 14 inches, 200/box (pictured right)
Certified Cheesecloth Bolt
100-yard bolt, 36 inches wide (not pictured)
Cat. No.
2050
Clean-Wipes™
2057
New universal
clean-up tool
2055
Optik-Wipes™
One swipe makes eye
glasses sparkle. Designed
specifically for wiping
goggles, lenses, eyeglasses,
gauge windows, plastic
glasses, fume hood
windows, optical parts, and
microscopes/magnifiers.
Clean smudges, dirt, dust,
and the static that attracts
them. Works equally well
with glass and plastic.
Pre-moistened cloths easily
remove oil, grease, and lint.
Lint-free
Won’t rip apart
Nonwoven cloth is pre-moistened with a unique formulation
and is soft and lint-free. Constructed of cellulose and polyester,
it will not scratch surfaces or fall apart. Wipe material is 90%
biodegradable. Individually dispensed wipe is handy and ready
for instant use. Each canister is shrink-wrapped for use in clean
rooms. Reclosable container assures a clean wipe every time
and eliminates contamination from dust or dirt. Microfiber cloth
to polish lenses is included. Individual pop-up 6 x 9 inches
wipes are packaged 100 per polyethylene canister.
108
Pre-moistened Clean-Wipes™
clean even the dirtiest
parts. Non-woven cloths are
moistened with a blend of pure,
reagent-grade 70% isopropyl
alcohol and 30% reagent-grade
deionized water or 100% pure
reagent-grade deionized water.
They are ideal for wiping optical
parts, delicate glassware,
electrodes, cuvettes,
microscopes, or lenses.
Wipes are also available dry,
with no solution. This permits using any liquid by simply adding eight fluid
ounces to the wipe canister. Instantly clean metals, plastics, glass, rubber,
and epoxies. Use for cleaning electronics, computer screens, instruments,
probes, glassware, syringes, pipettes, cameras, and lab counters. Wipes are
designed for all applications in environmentally sensitive areas.
Description
Cat. No.
Optik-Wipes™
2067
Very strong, nonwoven cloth is soft and lint-free. Constructed of cellulose and
polyester, it will not scratch surfaces. Wipe material is 90% biodegradable. Meets
all lab and production requirements for cleanliness, softness, absorbency, and
strength. Long-lasting wipes never fall apart like paper towels. Individually dispensed wipes are handy and ready for instant use. Unique opening allows wipes
to virtually glide out when pulled. Reclosable bench top container assures a clean
wipe every time. Snap-on sealed top eliminates contamination from dust or dirt.
Each canister is provided in shrink-wrap or a sealed bag to maintain cleanliness
for use in clean rooms. Size: 6 x 9 inches.
Description
Premoistened Alcohol/DI Clean-Wipes™
70% reagent-grade isopropyl alcohol and 30% reagent-grade deionized water
Premoistened DI Clean-Wipes™
100% pure reagent-grade deionized water
Dry Clean-Wipes™
User adds any solution
Qty/ canister
Cat. No.
100 wipes
2065
100 wipes
2060
100 wipes
2061
Anti-Static Static-Away™ Brush
Anti-Static Static-Away™ Brush eliminates the possibility that static will damage sensitive
tive lab work,
affect balance results, or harm microchip-driven instruments.
Power to take the ZAP out of static
Brush dissipates static while whisking away harmful dust, lint, and dirt from your
work environment. New design blends natural hair and synthetic conductive fibers
that simply remove static as it cleans. Because it won’t scratch critical surfaces,
it’s ideal for cleaning film, slides, optics, cuvettes, balance pans, microscopes,
electronics, and computer monitors. It has a conductive composite handle.
3321
3323
Maintain accurate readings
Use the compact brush to clean electronic balances and avoid pan weight variances
caused by static. Long handle brushes allow access to difficult places and eliminates
the possibility of a hand touching. Weight: ½ ounce.
3316
3322
Description
Brush width
Handle length
Cat. No.
Anti-Static Static-Away™ Brush
2½-inch
1½-inch
3316
Anti-Static Static-Away™ Handle Brush
1-inch
5-inch
3321
Anti-Static Static-Away™ Handle Brush
2-inch
5-inch
3322
Anti-Static Static-Away Handle Brush
3-inch
6-inch
3323
™
Lab Label Maker™
Quickly and easily make labels for chemicals, bottles, shelves, and equipment.
Self-adhesive colored tape sticks powerfully to any surface including glass, plastic,
metal, rubber, or wood. Raised white letters on 3/8 -inch wide tape are readable from
8 feet. Operation is easy: dial a letter, squeeze the handle, and when finished pull
down black lever in the front of the unit to cut the tape. Easy-Peel™ perforation
allows the label backing to be removed quickly and efficiently.
Low cost permits a label maker at every workstation
Lab Label Tape™, available in multiple colors, allows for color coding labels for specific
requirements. Label tape can be unloaded and reloaded in less than 30 seconds. No
batteries needed, unit is always ready to use. Supplied: two rolls of tape, blue and red.
Description
Dimensions
Lab Label Maker™
--
--
1600
Lab Label Tape™ Black, 4 roll/pk
3
/8” x 118 in.
9.5 x 3000 mm
1601
Lab Label Tape Red, 4 roll/pk
3
/8” x 118 in.
9.5 x 3000 mm
1602
™
Lab Label Tape Blue, 4 roll/pk
3
/8” x 118 in.
9.5 x 3000 mm
1603
Lab Label Tape™ Green, 4 roll/pk
3
/8” x 118 in.
9.5 x 3000 mm
1604
™
Cat. No.
Write-On™ Aluminum Tags
Permanently engrave your warnings, messages, instructions, or sample number on
these aluminum metal tags. Write on them with an ordinary ballpoint pen. Features a
soft center that takes messages on both sides.
Use in any environment
Extremely durable and suited for use in hot, cold, and moist environments. Handy
size of 31/8 x 11/8 inches makes it ideal for tagging valves, tubing, samples, and cylinders. Package includes 48 tags with wires.
Description
Cat. No.
Write-On Aluminum Tags
3070
™
109
Spray-Anywhere™ Adjustable Sprayer
Sprayer changes any bottle into a wash bottle, turns any reagent into a spray. Chemicalresistant and virtually unbreakable sprayer is made of polypropylene. It’s ideal for hot,
cold, aqueous, and solvent-based solutions. The entire unit may be gas or chemically
sterilized and is dishwasher-safe.
Measured delivery
Sprayer has a continuously adjustable spray for every requirement. Set it on fine-mist,
needle, or big-steam. Closed position maintains solution purity by preventing evaporation
and air/dust contamination. Trigger is comfortable for one-handed operation. Provides
controlled delivery and requires a very light pressure. Contoured shape fits in the hand
and reduces finger fatigue when pumping continuously. Instant-off release eliminates
messy drips on the bench.
Use with any container
A cone-shaped universal adaptor bung fits virtually all glass, plastic, and metal containers,
bottles, and flasks. Fits inside diameters from 1 inch to 13/8 inches. Tube diameter is ¼
inch. Tube length is 32 inches.
Description
Cat. No.
Spray-Anywhere Adjustable Sprayer
™
Adjustable Spray Wash Bottles
Wash Bottles with an adjustable spray
Wash Bottles have an adjustable spray for every requirement. Set the nozzle
on fine mist for TLC plates, position it to needle to rinse glassware, and pump a
continuous, forceful jet on the big stream position for washing filters.
No-effort pumping
The pump trigger is comfortable for one-handed operation, provides controlled
delivery, and requires a very light pressure. Ease of use reduces finger fatigue.
Contoured to fit in the hand, it makes the awkward-to-grasp, difficult-to-pump,
and impossible-to-control squeeze bottle obsolete. The instant-off trigger
release eliminates messy drips on the bench. Chemical-resistant and virtually
unbreakable bottle is made of high-density polyethylene (HDPE). The sprayer
is made of polypropylene (PP). Ideal for hot, cold, aqueous, and solvent-based
solutions. The entire wash bottle may be gas or chemically sterilized. It may be
cleaned in the lab dishwasher.
Zero contamination
Closed position on sprayer maintains solution purity by eliminating overnight
evaporation and air/dust contamination. Squat shape takes up little bench space
and assures a low center of gravity to eliminate tip-over problems. Doubleheaded design, available only in the 1000-milliliter size (1 liter), has a convenient
side-fill opening to help maintain purity of solutions. When bottle is empty,
the double-headed feature eliminates removing a pump and allows refilling in
seconds through a separate opening.
110
Description
Cat. No.
Double-headed Adjustable Spray Wash Bottle 1000ml
(lower left)
3340
Adjustable Spray Wash Bottle 240ml (3/pack)
(upper right)
3345
3347
Microprobes, 6-pack
Six scientific shapes for manipulating
micro work
Knife Set
Microprobes are ideal for lab applications—positioning
samples under a microscope, dissecting, inspecting,
soldering, gluing, and all micro-manipulation in the lab.
Fine precision cutting tools for the lab are provided by this high-quality knife
set. Ultra-micro to heavy-duty cutting edges are perfect for corks, paraffin,
plant samples, and rubber tubing. Exceptionally sharp knives are ideal for
delicate, close-tolerance, accurate cutting needs.
Hundreds of uses
Probes are excellent for hooking small springs, packing
columns, cleaning miniature parts, and soldering boards
(solder will not stick to probes). Precision-ground,
highly polished, hardened, and tempered stainlesssteel instruments are designed for quality-control and
experimental requirements. The tips are hand-honed to
needle sharpness. Handles are non-slip and ergonomically
designed. Probe length is 6 inches. Six different shapes are
supplied in a handy carrying case.
High-grade steel construction
Blades are made of the highest-grade steel and are ground to razor
sharpness for precision cutting. Features include positive-holding blade lock,
non-slip ergonomic handles, and a perfect weight for balance.
Over 47 blades
Comes complete with 8 different handles, 47 sharp blades, and an aluminumoxide, wet/dry sharpening stone. Set is packed in a handy plastic carryingstorage case with magnets to keep blades in place.
Description
Cat. No.
Description
Cat. No.
Microprobes, 6-pack
3310
Knife Set
3320
Micro Spatulas, 4-pack
Perfect for handling extremely small samples with ease
Use spatulas to dispense/transfer expensive chemicals, place particulate matter in
weighing containers, apply micro amounts of adhesive for tacking down specimens,
and mix small granular samples.
Four sizes
Use with balances, microscopes, and weighing boats. Flat-ended, steel blades have
widths of 0.004 to 0.04 inches (0.1 mm, 0.3 mm, 0.5 mm, and 1.0 mm). Handles are
color-coded for easy size identification. Overall length is 2½ inches (63.5 mm).
Description
Cat. No.
Micro Spatulas, 4-pack
3300
111
Original Labtool™
O
F in your pocket and provides 14 tools at-the-ready. This compact,
Fits
ffolding multi-tool was specifically designed for today’s needs.
Double lock safety system helps protect against accidental injury.
D
Provides for hundreds of laboratory and plant requirements—use
P
tthe file to score or break glass tubing, the opener for chemical
bbottles, the saw to reduce cork stoppers, the knife to cut tubing, and
much more. Has pliers/gripper, wire cutter, inches/millimeter ruler,
m
kknife, file, nut driver, large/medium/small flat head screwdrivers,
Phillips™ screwdriver, bottle/can opener, wood saw, and serrated
P
bblade. Constructed of stainless-steel for years of heavy-duty use.
M
Measures just 4 inches long when closed. Weight: 10 ounces.
Description
Cat. No.
Original Labtool™
3325
Labtool II™
Stainless-steel Labtool II™ with aluminum handle is the ideal device
to help with lab needs. Fourteen tools provide for hundreds of laboratory and plant requirements—use the opener for chemical bottles, the
saw to reduce cork stoppers, the knife to cut tubing, and much more.
Supplied: pliers/gripper, wire stripper, wire cutter, ruler, small knife, large
knife, serrated knife, punch, flat head screwdriver, Phillips™ screwdriver,
bottle opener, needle, saw, and serrated stripper. Pocket size unit measures just 3½ inches when closed, Weight: 7 ounces.
Description
Cat. No.
Labtool II
3326
™
Mini-Labtool™ with Key-Chain
Stainless-steel Mini-Labtool™ with aluminum handle is 13 tools in 1. Complete
with pliers/gripper, wire stripper, wire cutter, knife, flat head screwdriver, Phillips™
screwdriver, scissors, file, saw, bottle opener, can opener, and key-chain. Unit
measures just 2½ inches when closed, Weight: 3 ounces.
112
Description
Cat. No.
Mini-Labtool™ with Key-Chain
3327
Slide Holders/Cabinet
Store microscope slides with ease, speed, efficiency
Organize and classify your slides for instant reference and fingertip-fast retrieval. Use
the index-card Microscope Slide Holders to sort, classify, or arrange slides in any order.
Fingers never touch the slide.
Adapt to any file system
Cards may be added, removed, or changed for fast updating and filing—insert a new
card anywhere. You will never outgrow this system. Adapts instantly to your slide ID
system (numbers, letters, dates, names, or color coding). Visible, four-position tabs provide always-in-sight indexing. Ruled data lines are keyed to numbered slots and allow
complete slide identification, plus your comments.
Protect vital specimens from contamination
The durable holder is 3 x 5-inch cardboard fitted with a protective plastic frame. It ensures safe, clean, scratchproof, and secure protection for your specimens. Slides never
touch. One hundred percent compatible with any and all makes of slides. Each slide
holder card accepts four slides of 75 x 25 millimeters or 3 x 1-inch size of any thickness.
Description
Cat. No.
Slide Holders, 12-pack
1008
Slide Holders, 12-pack with file box
1007
Slide Holder Cabinet, 1 Drawer
Steel cabinet stores 100 slide holders, a total of 400 slides.
Dimensions: 51/8 x 6½ x 16¼ inches
1009
Slide Holder Cabinet, 2 Drawer
Steel cabinet stores 200 slide holders, a total of 800 slides.
Dimensions: 51/8 x 12½ x 16¼ inches
1075
Liquid Alarm
Inexpensive Liquid Alarm may be placed anywhere. Use it
to detect when drums, tanks, flasks, or beakers are close to
overfilling. It’s the perfect reminder for unattended filling of any
container. The moment a solution touches the sensor, the alarm
sounds and a red LED light flashes continually until the liquid no
longer touches the sensor.
Glassware Rescuer™
Alarm sounds for hours
Rescue glassware using diamonds
Save your glassware, recover beakers, and preserve your flasks
with this handy industrial diamond file. Instead of tossing glassware
because of a chip, now you can rescue it. Half round/half flat shape
smooths sharp and jagged edges.
Never discard chipped glassware again
Pays for itself in 30 days by making your glassware safe for use. Also
may be used to score glass tubing for breaking. No-slip-grip handle is
easy to hold. Size: ¼ inch dia., length 4 inches, overall length 8 inches.
Place the sensor on the floor to detect spills. It allows taking
action before a serious situation develops. A loud, high-decibel
alarm sounds and a red LED light flashes until the sensor is
removed from liquid. Constantly alarms for over 30 hours.
Position the detector on an overflow tube or near a pump to
alert you when an accident is occurring. Cable length is 10 feet.
Use with aqueous solutions and liquids that don’t attack plastic.
Battery-operated alarm sounds even during power outages.
Pays for itself by preventing just one ruined lab test. Size: 113/16 x
3 x ¾ inches. Weight: 2½ ounces. Supplied: 9V battery.
Description
Cat. No.
Description
Cat. No.
Glassware Rescuer™
3315
Liquid Alarm
3240
113
Humidity Sponge™ Regenerable/Indicator
The latest in drying technology turns any container into a desiccator. Indicator
bag particles show when moisture capacity has been reached.
Nontoxic and ideal for clean rooms
Humidity Sponges™ meet US FDA requirements for use in direct contact with
food and drugs. Desiccant (sodium calcium aluminosilicate hydrate) is nontoxic
and is a GRAS (generally recognized as safe) material. It is ideal for storing
food/pharmaceutical samples, electronics, PC boards, optics, chemicals, and
equipment. Outer material is made of DuPont’s Tyvek® breathable, high-density
polyethylene. Zero-Dust bags are certified as Class M3.5 (formerly Class 100)
clean room compatible.
Retains 16% moisture, guaranteed
Drying capability depends on volume, temperature, and moisture.
As a benchmark, one bag will maintain dry conditions in a container with a
volume of two gallons (476 cubic inches/7800 cubic centimeters). Bags are
guaranteed to retain 16% moisture by weight; typical results are 37% moisture
absorption. Each bag measures 3 x 3 x ¼ inches. Weight: 3/8 ounce.
Indicator Humidity Sponges™
Indicator Sponge has one side of clear film and one of white Tyvek®. It contains blues particles which turn pink when the desiccant has reached
its moisture capacity and needs to be replaced. Indicator Humidity Sponge™ cannot be regenerated.
Regenerable Humidity Sponges™
Regenerable Sponge has white Tyvek® on both sides and may be regenerated and reused continuously. Regeneration requires heating in an
oven at 220°F (104°C). Included in each pack is a Relative Humidity Card which changes from blue to pink to show when sponges need to be
regenerated. Tyvek® is a registered trademark of DuPont.
Description
Cat. No.
Humidity Sponge™ Regenerable (40-pack)
3150
Humidity Sponge™ Indicator (40-pack)
3151
Desi-Vac™ Containers
Desiccator with a vacuum pump is ideal for drying,
preserving, storing, and even shipping samples.
Vacuum pump built into the top removes air with
manual strokes. Rubber O-ring-sealed cover
maintains vacuum. Achieves a vacuum of better than
200 inches of water (15 inches of mercury). A release
key on top allows air into the plastic container to
remove the lid.
Keeps powder dry
Use desiccants to keep material dry—ideal for storing
chemicals, powders, sample tissues, and plant
sections, and for weighing samples.
Description
Diameter
Height
Volume
114
Cat. No.
Desi-Vac Vacuum Pump Container
4½ inches
5 inches
42 in
700 cc
3160
Desi-Vac™ Vacuum Pump Container
5 inches
7¼ inches
91 in3
1500 cc
3162
Desi-Vac™ Vacuum Pump Container
8½ x 7 inches
7¼ inches
183 in3
3000 cc
3163
™
3
Ultrasonic Automatic Measuring Meter
Simply point and shoot to measure distance, area, and volume. Designed specifically for easy and
intuitive use. After one minute, you’ll never again look at the instructions. LCD displays exactly which
measurement is being made. One-key operation automatically performs length, area, or volume
calculations. Audible beep confirms each measurement. Three distance memories and one calculation
memory are maintained even when the unit is off. Memory permits computing areas and volumes from
stored measurements. Calculator function permits addition/subtraction of readings.
Range is 2 feet (0.61 meters) to 50 feet (15.24 meters). Resolution is 0.1 feet and 0.01 meters with accuracy of 1% ±1 digit. Instantly converts meters to feet or vice versa with the push of a key. Utilizes the
newest-generation, high-precision ultrasonic sensor. Designed for indoor/outdoor use. Automatically
and accurately compensates for temperature from 32 to 104°F (0 to 40°C). Supplied complete 1-year
battery. Size: 51/8 x 25/8 x 11/8. Weight: 5½ ounces.
Description
Cat. No.
Ultrasonic Automatic Measuring Meter
3419
Key-Chain
Micro-Laser Pointer
Laser Pointer
Perfect pocket laser pointer for slide
presentations, detailed scientific
discussions, microscope projections,
field studies, wall charts, and lectures.
Provides a brilliant red light at the highly
visible 630–680 nm wavelength with a
beam diameter of 3.5 mm. Laser Class
IIIA has an output power of 5 mW and
a range of over 300 feet. Two batteries
provide months of intermittent use or 2
hours of continuous use. Size: ½-inch
diameter x 5½ inches. Weight: 13/8
ounces. Supplied: batteries, pocket clip.
Laser Key-Chain
Pointer’s brilliant red beam works equally well
in daylight and dark. Laser is designed specifically for slide presentations, wall charts, and
field use. Beam is at the highly visible 650 nm
wavelength with diameter of 3.5 mm. Output
is 4 mW with a range of 400 feet. Key-chain
makes it easy to carry. Supplied lithium battery
powers unit for a year of intermittent use. Size:
2½ x 1 x ¼ inches,. Weight: ½ ounce.
Laser is perfect for slide presentations, wall
charts, and lectures. Provides a brilliant red
light at the highly visible 650 nm wavelength
with a beam diameter of 3.5 mm. Power
Class III laser has an output power of 4 mW
and a range of 300 feet.
Three silver-oxide batteries provide months
of intermittent use or 2 hours of continuous
use. Switch is momentary on/off. Size:
9/
3
16 -inch diameter x 2 /8 inches. Weight: less
than one ounce. Supplied complete with
batteries and key-chain.
Description
Cat. No.
Description
Cat. No.
Description
Cat. No.
Laser Pointer
3140
Laser Key-Chain
3143
Key-Chain Micro-Laser Pointer
3141
115
Flexible-Arm™ Light
Moves in all directions
Flexible-Arm™ places light exactly where needed. It’s ideal for
inspection, quality control, electronics, and sample examination.
Fingertip bar raises, lowers, and pivots the perfectly balanced
lamp wherever desired. It moves 360 degrees in three dimensions. The arm smoothly articulates at three points. Spring
counterbalance permits smooth and fluid movement with superior
stability. Stylish design is geared specifically for the lab. It is
engineered with durable metal construction for years of heavy
use. The shade is compact and vented, has rolled edges, and a
safety-glass cover with a UV filter for eye protection.
Natural daylight
Designed specifically to reduce distortion, increase contrast,
and give visual clarity up to 40% greater than typical lamps. It is
ideal for viewing samples, photographs, PC boards, and reading. It brings out the finest details and renders colors accurately.
Beam closely resembles daylight for correct color detection. The
natural light is virtually glare-free.
Perfect task lamp
Supplied with 7-pound, 7-inch diameter metal base for the bench. In addition, it comes with clamping unit for positioning vertically or horizontally to the top or side of any edge. Supplied: white reflector and 35 watt bright halogen white light. Unit Weight: 8
pounds. UL listed, 115 VAC.
Description
Arm Length
Cat. No.
Flexible-Arm™ Natural-Light™ Light
20-inches
3095
Flexible-Arm™ Natural-Light™ Light
31-inches
3096
2X Magnifier Lamp
Magnifier Lamp is the ideal tool to view objects at two times magnification in
bright light, with high-contrast and a sharply defined focus. Designed specifically for lab and plant applications requiring precise work. Useful in inspection,
electronics, quality control, sample examination, and biological analysis.
Magnifies large area
Large viewing area (4 x 2½ inches) is easy on the eyes. Highly polished
optical glass 2X lens provides a crisp and distinct image with vivid enhancement of surface details. Sliding shutter cover protects lens from dust
and scratches when not in use.
Bright light makes examination easy
Supplied with a 60-watt incandescent bright bulb to light the exact area to
be viewed. Brilliant light beam closely resembles daylight for optimal color
detection and clarity. Convenient front handle provides fingertip control
to raise, lower, and pivot the magnifier wherever desired. Extension is 31
inches. Clamps vertically or horizontally to the top or side of any edge. ULand CSA-listed.
116
Description
Cat. No.
2X Magnifier Lamp
3357
Hands-Free™ Fold-up Magnifiers
Hands-Free™ Magnifiers allow two-handed examination of objects. They provide a
sharp, crisp, distinct image with vivid enhancement of details. Some sizes provide
battery-powered brilliant illumination for precision work (batteries supplied).
Illuminated Microscope
Cat. No.
Magnification
Lens Diameter
Lighted
Pocket Microscope magnifies view. An indispensable tool
for anyone who needs to see things at high magnification
in bright light, with true color, high contrast, and a sharply
defined focus. Handheld unit is perfect for inspection,
quality control, field use, electronics, metal analysis,
clinical observation, cloth/paper examination, and plant
studies. Adjustable light source directs the bright bulb
onto the exact area to be examined. An adjustable focus
control knob produces a rock-solid view.
3430
2.5 X
45/8 inches
YES
Rugged microscopes
3431
2.5 X
2½ X 3½ inches
YES
3432
3.0 X
3 X 3 inches
NO
3433
3.5 X
3½ X 2 inches
NO
3434
5.0 X
5 X 1¼ inches
NO
Case is chemical- and shock-resistant ABS plastic. Zoom
microscope comes with snap-on microscope slide holder
accessory. Supplied: batteries and a vinyl carrying case
(model 3356 only). Pocket-sized units measure 5½ x 1½
x 7/8 inches and weigh only 3 ounces.
3435
7.0 X
7 X 7/8 inches
NO
3436
10.0 X
10 X ½ inches
YES
Magnifiers have perfect focus with zero distortion
Designed specifically for use in quality control, labs, food, electronics, manufacturing,
and universities. White ruler markings in both inches and millimeters on the lower
panel assist in making measurements. All-glass optics assure perfect focus with
zero distortion. Magnifiers fold twice for compact storage.
Description
Cat. No.
Illuminated Microscope 30X
3355
Illuminated Microscope
(60X to 100X with snap-on slide holder)
3356
Illuminated Magnifier
Powerful lighted magnifiers provide perfect-focus, highly-defined
view of surface details and illuminate uniformly. Units feature
state-of-the-art LED lamps and provide bright, even light.
Superior LED lamp-life is nearly 20 times that of conventional
incandescent illumination and virtually eliminates bulb
replacement. Lamps low-power consumption and highefficiency also improves battery life and performance. Supplied:
replaceable batteries.
Magnification
Cat. No.
Illuminated Magnifier 2X with 4X spot
(Large size, 2¾ x 2¾ inches window)
3350
Illuminated Dual Magnifier 3X with 10X
(Medium size, 1¾ x 1¾ inch window)
3351
Magnifier with adjustable focus 8X
(Small size, 1 inch diameter, not illuminated)
3352
117
Scientific
Technical Pen
Assortment
Record results in lab notebooks, fill in charts, draw
graphs, mark recording paper, and produce diagrams.
Pen’s unique, long leg lays
flat against rulers and flexible curves for accurate alignment. This precision
pen is perfectly balanced to feel good in your hand. Instant writing, long
storage time, and dry-out prevention are ensured by an airtight ring seal in
the cap. Pen responds the moment it is touched to paper.
Permanent Marking Pen
Assortment
Long lasting, no bleeding
Produce precise lines of 0.3-mm width. Perfect marking
pens for lab samples, microscope slides, photographic
slides, glass and plastic beakers, and plastic sample bags.
Writes on all surfaces including glass, film, wood, plastic,
metal, rubber, and porcelain. Unique stainless-steel long
leg allows precise writing in a limited space. Instant writing,
long storage time, and dry-out prevention are assured by
an airtight ring seal cap.
Smooth-flowing, fade-proof ink is a patented formulation. Instant-drying
ink eliminates smearing and bleeding. Extra-large ink reservoir assures
half-mile write out. Colors are ultra-black (opaque black for making superb
photocopies), vivid red, blue, and green.
Narrow 0.2 mm lines
Perfect and precise lines are drawn at first stroke with the long-legged,
highly polished stainless-steel point tube. Durable wear-free plastic tip
glides smoothly across a page. Tip stays sharp—won’t mush up. Narrow
line is sharp, precise, clear, and constant. Line sizes are 0.2 mm and 0.4
mm. Order an assortment and a pack of your favorite color.
Permanent ink dries in a split second and is waterproof and
fade proof. Colors are opaque black, vivid red, blue, and
green. Thinnest permanent line ever developed is sharp,
precise, and clear.
Cat. No.
Color & Quantity
Size
Cat. No.
Size
Color
# In Pack
0.2 and 0.4 mm
Red, Blue, Green and Black
12
3050
6 black, 2 red, 2 blue, 2 green
0.3 mm
3040
3051
Black/ 6 pack
0.3 mm
3041
0.2 mm
Black
6
Black
6
6
3052
Red/ 6 pack
0.3 mm
3042
0.4 mm
3053
Blue/ 6 pack
0.3 mm
3043
0.2 mm
Red
3054
Green/ 6 pack
0.3 mm
3044
0.4 mm
Red
6
3045
0.2 mm
Blue
6
3046
0.4 mm
Blue
6
3047
0.2 mm
Green
6
3048
0.4 mm
Green
6
Hand Tally Counter
Easy-to-use, four-digit unit records up to 9999. Numbers instantly
and automatically return to zero with a twist of the reset knob.
Hundreds of lab applications provide opportunities to: count blood
samples, take surveys, inventory items, total drops of liquid,
receive lab samples, and tally biomedical events.
Long-lasting metal construction
For ease in viewing, large white numerals appear on a black background. A
protective window seals out dust, dirt, and humidity. The rugged, heavy-duty
chrome-finished case has a hinged finger loop for a sure grip. Finger pressure on
the key produces an audible click that signals the count. This feature provides the
assurance of a registered count without looking at the counter. Metal construction
is designed for reliability, long life, and hard use. Unique engineering provides a
smooth, tactile feel. Compact unit is ideal for carrying in the pocket. Size: 1¾-inch
diameter by 11/8 -inch width,. Weight: 3 ounces.
118
Description
Cat. No.
Hand Tally Counter
3125
Counter-Pen™
Co
Touch-Counter™
™ is a combination
Coun
Counter-Pen
mark
marker and digital counter designed
ed
for the
th lab and plant. Each time
me a
black mark is made with
th the felttippe
tomatically sounds
tipped pen, it automatically
a beep,
bee andd LCD displays the count.
Use itit to count cell growths on petri
dishe
s, inventory parts, and tally
dishes,
samp
sampless received.
Cut counting time in half
Touch-Counter™ is a combination
nation
marker and digit counter designed
esigned
for the lab and plant. Each time an
item is touched, it is automatically
atically
marked by the felt-tip pen and
counted by the built-in digital
al
counter. Use it to count sample
mple
bottles, cell growths, and too receive//
inventory/ship supplies.
One-touch operation saves time
Operation is simple: Touch an item
it andd it is
i marked
k d andd counted
t d
simultaneously. Impossible to make an error, even when interrupted. Marks
hold your place and counter holds your total. Durable aluminum unit has an
audible click, zero reset knob, and a 9999-digit counter. Touch-Counter™ is 7 x
2 x 1½ inches in length. Weight: 6 ounces. Spring-actuated ink reservoir valve
seals felt tip when not in use and prevents ink dry-out.
Description
Touc
und, and count occur
Touch, sound,
simu
usly. Impossible to make
simultaneously.
an er
error, even when interrupted—
marks hold yourr place and counter
holds your total. Durable ABS plastic
/visual
unit provides audio/visual
counts to 99999 with reset key, on/
off switch, and pen cap. Size: 6 x 2/3
inches. Weight: 1 ounce.
Cat. No.
Touch-Counter
™
3130
Supplied with black disposable pen.
Disposable 5-Pen Pack
™
3131
Package contains 5 each: black
Disposable 5-Pen Pack™
Description
3132
Package contains one each: black, red, blue, green, and yellow.
Cat. No.
Counter-Pen
™
3133
Digital KeyChain Counter
with Wrist Strap
Digital Counter
Lightweight counter reads to 99,999. Water-resistant, O-ringsealed and shock-resistant ABS plastic case is ideal for lab
and plant use. Tactile click keys provide positive action.
Completely electronic
Easy-to-read LCD and solid-state construction eliminate gear
and miscount problems associated with mechanical counters.
Fail-safe design eliminates accidentally resetting. Size: 25/8 x
12/3 x 5/6 inches. Weight: 1 ounce. Battery powers unit for over 2
years of continuous operation.
Key-Chain/Wrist-Strap/
Carabiner Digital Counter
is designed for ease-ofuse and fail-safe counting.
Features include display
count to 99,999, two year
constant use battery, waterresistant O-ring-sealed with
shock-resistant ABS plastic
case, key click for count
confirmation, and recessed
no-accident reset.
Eliminates gear and
miscount problems associated with mechanical counters. Diameter is 17/8
inches by ½ inches. Weight: less than an ounce.
Description
Cat. No.
Description
Cat. No.
Digital Counter
3127
Digital Key-Chain Counter/Wrist Strap
3129
119
Mini-Dolly Folding Cart
Aluminum
Fold-Up Cart
This is the ideal platform cart to move chemicals,
carboys, computer paper, filing boxes, and
scientific equipment. Eliminates lifting required
by high-shelf carts. Cart ingeniously folds to a
compact size for easy storage.
Sturdy aluminum alloy construction permits
this lightweight cart to be used for loads
up to 330 pounds. Move your heaviest lab
chemicals, drums, and cases of glassware
with this cart.
Easy rolling
Weighs only 20 pounds, but handles up to 265
pounds. Large nonskid platform (17¾ x 25½
inches) holds materials firmly. Plastic guard on
four sides protects your walls. Supplied elastic
cords with quick hooks secure the load.
Adjustable height
Folds up for easy storage to a compact
briefcase size. Handle adjusts to two heights
(27 inches and 33 inches) to accommodate all
users. Platform extends for longer loads from
18 inches to 25½ inches. Width is 16 inches.
Supplied bungee cords keep items from
slipping. Large, solid rubber wheels make
this cart extremely easy to push. Rubber
bumpers on all four corners protect walls from
accidental nicks. Weight: 18 pounds.
120
Description
Cat. No.
Aluminum Fold-Up Cart
3081
Aluminum
Fold-Up Hand Truck
Move cartons, chemicals, and gas cylinders
easily. Aluminum alloy construction allows this
lightweight unit (only 15 pounds) to move loads
up to 220 pounds. Supplied bungee cords
hold materials firmly in place.
Store in a drawer
Folds to a compact size for easy storage.
Height of handle is 28 inches (lower position)
and 42 inches (extended). Flip-down platform
size: 14 inches wide by 9½ inches. Big,
smooth-rolling, solid-rubber, 6½ inch diameter
tires make it easy to move heavy loads.
Description
Cat. No.
Aluminum Fold-Up Hand Truck
3082
Super-glide wheels swivel for complete
maneuverability. Easy-grip handle is 34½ inches
long and ensures a firm hold. Constructed of highimpact ABS plastic and chrome-plated steel for
durability.
Description
Cat. No.
Mini-Dolly Folding Cart
3080
Traceable® Digital Calipers
Designed for the lab
Traceable® Calipers make length/diameter measurements three ways—outside, inside, and
depth. Digital display measures to 8-inches (200mm). At the touch of a key units switch from
inches to millimeters.
Zeroes at any point
Key instantly sets unit to zero when jaws are at any position. This permits, without
calculations, setting a Floating Zero™ or reference point to read “greater than or less than
results with a minus sign displayed”. Ergonomic design precision calipers are ideal for
measuring the outside diameter of stoppers, the inside diameter of tubing, and the depth
of vials. Depth bar extends from the end of caliper. Fine adjustment thumb roller improves
reading speeds and position-holding lock screw sets length. Easy-to-read jumbo digital
display is 1/3 -inch-high. No lubrication is ever required on the ultra-smooth slide bar. Made of
durable acid-resistant, stainless-steel or strong, composite carbon fiber. To assure accuracy
an individually serial-numbered Traceable® Certificate is provided from our ISO 17025
calibration laboratory accredited by A2LA. It indicates traceability to standards provided by
NIST (National Institute of Standards and Technology).
Traceable® Digital Caliper Specifications Chart
Cat. No.
3415
3416
3417
8”/200mm
4”/100mm
Stainless-steel
Material
6”/150mm
Measuring range
3415
3418
Carbon Fiber
6”/150mm
Resolution
0.0005 inch/0.01mm
0.01 inch/0.1mm
Accuracy
±0.001 inch or ±0.03mm
±0.01 inch or ±0.2mm
Depth Bar
Yes
No
Thumb roller/Lock screw
Yes
No
Non-metallic/non-conductive
No
Yes
Dimensions
Weight
3417
9 x 3 inches
11 x 3 inches
7 x 2½ inches
9½ x 3 inches
5 ounces
6 ounces
1 ounce
2 ounces
3418
Traceable® SpatulaBalance™
Unique spatula both scoops material and instantly displays weight. Balance
with digital display is located in the easy-grip handle. The weighing range is
0 to 300.0 grams and 0 to 10.580 ounces. Readability is 0.1 gram and 0.005
ounce. Level position repeatability is 0.1 gram and accuracy is ±0.2 g or
0.25%. Three position soft-touch keys in the handle tares (sets to zero), hold
(freezes the display), and changes grams/ounces. LCD indicates low battery.
Scoop design eliminates spilling
Markings on see-through scoop are graduated from 5 to 30 milliliters in 5
milliliter increments for weighing liquids with ease. Scoop detaches from
balance for effortless dishwasher-safe cleaning. Chemical/corrosionresistant ABS plastic construction allows transferring materials without
sticking. SpatulaBalance™ transfers and weighs crystals, granulated material,
solids, liquids, precipitates, and chemicals.
To assure accuracy an individually serial-numbered Traceable ® Certificate
is provided from our ISO 17025 calibration laboratory accredited by A2LA.
It indicates traceability to standards provided by NIST (National Institute of
Standards and Technology). Supplied: two batteries for over a year of usage.
Scoop holds 32 milliliters/1.1 fluid ounces and scoop volume is 32 cubic
centimeters/1.95 cubic inches. Size: 9 x 2 x 1 inches. Weight: 3 ounces.
Description
Cat. No.
Traceable SpatulaBalance
®
™
3475
121
Metric Converter
Change lab measurements to U.S.
or metric in an instant with this
handy workhorse
Metric Converter provides fast and accurate
answers for 126 types of metric conversions.
Simply enter a number, press an arrow,
and read the exact metric or U.S. answer
with decimal point in place. Converts
length, area, volume, weight, liquid, energy,
and temperature. Also performs English
(Imperial) conversions and has all routine
calculator functions.
Easy-to-use, easy-to-read
Raised keys make the metric converter a joy
to use, even for large fingers. It has an automatic, flip-open, LCD cover that converts to
a bench top stand, rubberized side grips for
easy handling, and a bright and vivid ½-inchhigh eight-digit LCD that is easy to read. The
converter is ultra-lightweight, just 2 ounces,
and has a super-compact size, only 3 x 3¾ x
½ inches—this makes it perfect for carrying
in a pocket.
Description
Cat. No.
Metric Converter
1000
Compact-Sized
Metric Converter
Big Digit Solar-Powered
Calculator
Compact-Sized Metric Converter replaces
cumbersome factor handbooks. Unit provides fast and accurate answers for 126
types of metric conversions. Simply enter
a number, press an arrow, and read the
exact metric or U.S. answer with decimal
point in place.
Environmentally friendly, never
again buy a battery
Performs conversion functions
Converts length, area, volume, weight, liquid,
energy, and temperature. Also performs
English (Imperial) conversions and has all
routine calculator functions.
Raised keys, large digits (½-inch-high), and a
bright, vivid eight-digit LCD make the metric
converter easy to read and use. Supplied:
1.5 V alkaline battery and protective case.
Ultra-lightweight, just 1 ounce, and supercompact size, only 4¼ x ½ x 2½ inches,
make it perfect for carrying anywhere.
Description
Cat. No.
Compact-Sized Metric Converter
1001
Calculator displays the entire answer to 12 digits
Twelve digits end rounding errors and confusing scientific notation. Oversized, raised keys
and jumbo digits (½-inch-high) make it easy on the fingers and eyes. Simple to use. Functions include arithmetic calculation, percent, memory, floating decimal, ratios, and grand
totals. Tough ABS plastic case is drop-proof and chemical-resistant. Supplied: solar panel
and silver-oxide battery. Size: 4½ x 2½ x 5/8 inches. Weight: 3 ounces.
122
Cat. No.
12-Digit Computer
6029
Over-sized keys and jumbo digits make it
easy on the fingers and eyes. Performs all
arithmetic operations (add, subtract, multiply,
divide), and features memory, percent, and
floating decimal point. Supplied: attractive,
protective case design. Size: 4¼ x 23/8 x ¼
inches. Weight: 2 ounces.
Easy to use, easy to read
12-Digit Computer
Description
Large digit calculator is solar-powered, saves
batteries, and it’s ideally priced. Half-inchhigh digits allow effortless readings.
Description
Cat. No.
Big Digit Solar-Powered Calculator
6023
Scientific Calculator
Solar Desktop Calculator
Scientific calculator performs 99% of the lab’s routine and not-soroutine calculations. It does all arithmetic operations (add, subtract,
multiply, divide). It performs over 50 functions, including science,
math, common/hyperbolic trigonometric, logs/natural logs, powers,
roots, reciprocals, factorials, percentages, hexadecimals, random
number generation, and degree/decimal conversion. Statistical
features include standard deviation, mean, sum of squares, sum of
data, and much more. Three-key memory and forever-memory store
data when the unit is off. Automatic power-down function conserves
battery life. Answers are shown on a 10-digit numerical, 2-digit
exponent display.
Solar Desktop unit is a big-digit desktop calculator which features
arithmetic functions (add, subtract, multiply, divide), percent, 3-key
memory, square root, and floating decimal point.
Solar-powered unit can be read in any light. Performs chain calculations. Digit height is ¾ inches. Large 8- or 12-digit display is angled to
eliminate reflected glare. Oversized keys and perfect spacing are easy
on the fingers. Tough ABS plastic case is ideal for rough lab use. Feet
protect the unit from spills. Supplied complete with instructions. Size:
4½ x 6½ x 3/16 inches. Weight: 4 ounces.
Easy-to-carry pocket size, easy-to-use raised keys
Handy pocket size makes it ideal to carry with you. Rugged case
protects the unit. Raised keys make the calculator perfect for
oversized fingers. Large, vivid display is easy to read. Size: 5 x 3 x ½
inches. Weight: 1½ ounces.
Description
Cat. No.
Scientific Calculator
6024
Description
Cat. No.
Solar Desktop Calculator (8-digits)
6031
Solar Desktop Calculator (12-digits)
The 12-digit unit permits calculating numbers as large as 999,999,999,999
and as small as .000000000001 without confusing scientific power notations
or symbols.
6032
Clipboard/Calculator with Traceable® Timer
Perfect for keeping notes
Clip securely holds forms, notes, and schedules. Attached pen is always at the ready. Opening in
back allows unit to be hung on the wall. Eight-digit, solar-powered calculator performs 99% of the
lab’s routine calculations. Functions are: add, subtract, multiply, divide, chain calculation, constants,
powers, reciprocal values, percent calculations, square root, and memory.
Two models
Supplied as two different models, one with a quartz-crystal accurate Traceable ® timer, and the other
with a retractable tape measure (60 inches and 150 centimeters). Timer model may be programmed
in the countdown mode, in one-second increments, from 100 hours to 1 second. At zero, a loudbeeping alarm sounds for 60 seconds or may be silenced manually. In the stopwatch mode, it times
from 1 second to 99 hours. Also has a time-out feature in both up and down counting. Big-digit,
1
/3 -inch-high display is easy to read.
To assure accuracy an individually serial-numbered Traceable ® Certificate is
provided for timing. It indicates traceability to standards provided by NIST (National
Institute of Standards and Technology). Size: 14 x 9 inches. Weight: 11 ounces.
Description
Cat. No.
Clipboard with Calculator and Traceable Timer
3421
Clipboard with Calculator with Measuring Tape
3422
®
123
Traceable® Certificate assures accurate lab tests
All Traceable® products are provided with a Traceable® Calibration Certificate from our ISO 17025 calibration laboratory. Timer, thermometer, hygrometer, barometer,
gauge pressure, differential pressure, balance, conductivity cell, conductivity solution, conductivity meter, pH solution, salinity meter, dissolved oxygen meter, and
caliper Certificates are accredited by the American Association for Laboratory Accreditation (A2LA).
A2LA is widely recognized internationally through bilateral and multilateral agreements and through its participation in the International Laboratory Accreditation
(ILAC) and Multilateral Recognition Arrangement (MRA). Through Control Company’s A2LA Accreditation, Traceable® Certificates are internationally recognized by
accreditation agencies, governments, industrial companies, biomedical companies, universities, and hospitals in over 75 countries throughout Europe, the Middle East,
North America, South America, Asia, and Africa.
Traceable® Certificate indicates the product is traceable to standards provided by the National Institute of Standards and Technology (NIST), a U.S. Government
agency within the Commerce Department. The Traceable® Certificate complies with ANSI/NCSL Z540-1.
Accredited by A2LA (The American
Association for Laboratory Accreditation)
ation)
dedicated to "one test accepted
everywhere, one accreditation
accepted everywhere".
A2LA is your assurance of
internationally recognized
technical laboratory competence.
A2LA is recognized by ILAC
and MRA.
ificate
le® Cert
Traceab
Conforms to universally
u
recognized
ISO
IS 17025 Standard, a
requirement for any
ISO 9000 quality facility
Establishes
with reference
Estab
numbers
number the unbroken chain
oof traceability to NIST
Displays
Displ
serial number for
total product identification
Displays catalog number
for complete product reference
Spells out test uncertainty
Spell
ratio and confidence level
Calls out the test equipment
used for calibration
Indicates Calibration
Due Date
Reports environmental conditions
at the time of measurement
Specifies Calibration
Date when the unit
was tested
Spells out test uncertainty ratio
and confidence level
Signed by the
Technical Manager
Lists specific conditions that may
affect product accuracy
Supplied from our ISO 9001
quality facility certified by DNV
Provides
measurement test
results for your specific unit
Go to
www.control3.com/technical.htm
www.contro
for calibration
c
information
Signed by the Quality Manager
Control Company • 4455 Rex Road • Friendswood, Texas 77546 • USA
Control Company • Drawer 58307 • Houston, Texas 77258 • USA
Email [email protected] • www.control3.com
Telephone 281 482-1714 • Fax 281 482-9448
ISO 9001 Quality Certified by DNV • ISO 17025 Calibration
Laboratory Accredited by A2LA • ISO Guide 34 Certified Reference
Material Producer Accredited by A2LA
Printed in U.S.A.
Traceable® is a registered trademark of Control Company
Specifications subject to change without notice.
©Control
Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement