Craftsman | 973.11133 | Owner's Manual | Craftsman 973.11133 Owner's Manual

Owner's Manual
Variable Speed / Reversible
3/8 in. CORDLESS DRILELDRIVER
Model No.
973.111330
Save this manual for
future reference
_, CAUTION:
Read and follow all
Safety Rules and Operating Instructions before first use of this
product.
Customer Help Line: 1-800-932-3188
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
972000-720
6-OO
• Safety
• Features
• Operation
• Maintenance
• Parts List
®
-I
_Wetrardy_.:_
........................................................................................................................2
• i.. Intro_lu_ion.anc[P_lu, ct Specificet_Ol_
...........................................................................................................2
• RulesFor Safe OperalJon.............................................................................................................................3-5
ImportantSafety RulesFor BatteryTools................................................................................................4
B. ImportantSafety instructionsFor Charger...............................................................................................4
.- C, ImportantInformationFor RechargingHot Batteries............................................................................... 5
•
•
Accessories....................................................................................................................................................6
Features .........................................................................................................................................................6
•
•
Operation...................................................................................................................................................7-12
Maintenance.................................................................................................................................................13
•
•
BatteryPackRemoval and PreperationFor Recycling.................................................................................. 13
ExplodedV'.,ewandRepelr Pads Llet............................................................................................................. 15
•
PartsOrdedngI Ser,.,ice................................................................................................................................. 16
FULL ONE YEAR WARRANTY
ON CRAFTSMAN
3/8 In. DRILL-DRIVER
If this CRAFTZMRN 3/8 in. Drill-Driver fails to give complete setlefactfon within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED _rATES, and Sears will repair it, free
of charge.
If this €IIIIFIIMIIN
3/8 in. Ddll-Ddver Is used for commercial or rental purposes, this warranty applies for only gO
days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other righte which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman E_ates, IL 60178
Your drill-driver has many features for making drilling
operations more pleasant and enjoyable. Safety,
pedormance and dependability have been given top
pdodty in the design of this drill-ditver making it easy
to maintain and operate,
SPECIFICATIONS:
Chuck Capacity
Motor
3/8 in.
10.8 Volt DC
Charger Retlng
120 Volts, 60 Hz, AC Only
No Load Speed
A
CAU'nON:
Camfolly read through this entire
owner's manual pefom using your new drilldriver. Pay close attention to the Rules For Safe
Operation, Warnings and Cautions. If you use
your ditli-ditver properly and only for what it is
intended, you will enjoy years of safe, ral[able
service.
Switch
Charge Rate
Clutch
Maximum Torque
0 - 600 RPM
Variable Speed / Revemibte
3-5 Houm
6 Position
100 in. Ibs.
Thepurpose
ofsafety
symbols
Istoattract
your
attention
topossible
dangers,
Thesafety
symbols,
and
theexplanations
withthem,
deserve
yourcareful
attention
and understanding.
The safety warnings do
not by themselves eliminate any danger, The Instructions
proper a©old<mt prevention measures.
SYMBOL
,A
or warnings
they give are not substitutes
for
MEANING
SAFETY ALERT SYMBOL:
Indicateswamingor caution.May be usedin conjunctionwithothersymbolsor pictographs.
&
&
NOTE:
_
WARNING: Failureto obeya safetywarningcan resultin sedousinjuryto yourselfor to others.
Alwaysfoltowthe safety precautionsto reducethe dskof fire, eldctdcshockandpersonalinjury.
CAUllON:
Failure to obey a safety warning may result in properly damage or personal injury to
yourself or to others. Always follow the safety precautions to reduce the dsk of tire, electric shock
and pemonai injury.
Advises you of information or instructions vital to the operation or maintenance
B
B
B
or serious personal _nJury. Save owner's manual
and review frequently for continuing safe
operation, and instructing others who may use
this toot.
M
WEAR PROPER APPAREL. Do not wear Icose
clothing or jewelry that can get caught in tool's
moving parts and cause personal iniury. Rubber
gloves and nonskid footwear are recommended
when working outdoors, Wear protective hair
covering to contain long hair and keep it from
being drawn into nearby air vents,
manual carefully. Learn its applications and
limitations as well as the specific potential
hazards related to this tool.
M
ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses have only impact-resistant lenses;
they are NOT safety glasses.
GUARD AGAINST ELECTRICAL SHOCK by
preventing body contact with grounded surfaces.
For example: Pipes, radiators, ranges, refdgeratot e_ures.
M
PROTECT YOUR LUNGS. Wear a face mask or
dust mask if operation is dusty,
M
PROTECT YOUR HEARING. Wear headng
protectionduringextendedpadedsof operation,
M
SECURE WORK. Use clamps or a vise to hold
work. It's safer than using your hand and it frees
both bends to operate tool.
KNOW YOUR POWER TOOL
attachment to do the job of a heavy duty tool.
Don't use tool for purpose not intended - for
example - A circutar saw should never be used
for cuffing tree limbs or logs.
Read owner's
KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
AVOID DANGEROUS
ENVIRONMENT,
Don_
use power tool in damp or wet locations or
expose to rain. Keep work area waif lit.
KEEP CHILDREN AND VISITORS AWAY. All
visitors should wear safety glasses and be kept a
safe distance from work area. Do not let visitors
contact tool or extension cord.
n
DON'T OVERREACH. Keep proper footing and
balance at all times. Do not use on a ladder or
unstable support,
M
MAIN-LAIN TOOLS WiTH CARE. Keep tools
sharp at all times, and clean for best and safest
pedormance. Follow instructions for lubr;coting
and changing accessories.
m
REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking to see that
keys and adjusting wrenches are removed from
tool before turning it on,
STORE IDLE TOOLS. When not in use tools
should be stored in a dry and high or locked-up
place - out of the reach of children.
B
USE RIGHT TOOL. Don't force small tool or
WARNING:
Do not attempt to operate this tool
until you have read thoroughly and understand
completely all instructions, safety rules, etc.
contained in this manual. Failure to comply can
reautt in accidents involving tire, electdc shock,
READ ALL INSTRUCTIONS
m
of the equipment.
DON'T FORCE TOOL. It will do thejob better
and safer at the rate forwhichit was designed.
RULES FOR SAFE OPERATION (Continued)
•
•
NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could
ignite flammable liquids, gases, or fumes.
n
KEEP HANDLES DRY, CLEAN, AND FREE
FRO• OIL AND GREASE. Always use a clean
cloth when cleaning, Never use brake fluids,
gasoline, petroleum-based products or any
strong solvents to clean your tool.
m
STAY ALERT. Watch what you are doing and
use common sense. DO not operate tool when
you are tired. Do not rush.
m
BATTERIES
explode.
•
•
DO not touch metal parts when d tilling into a wall;
grasp only the insulated handle(s) or plastic
housing when using this tool, Make sure hidden
electrical wiring, water pipes, and mechanical
hazards are not in the path of the bit when
dhlling into a wall.
m
INSPECT
SECURE WORK before applying power. NEVER
hold workpiece in your hand or across your legs.
WHEN SERVICING
CRAFTSMAN
USE ONLY IDENTICAL
REPLACEMENT
PARTS.
IMPORTANT SAFETY INSTRUCTIONS
CHARGER
FOR
SAVE THESE INSTRUCTIONS.
This manual
contains impodant safety and operating
instructions for battery charger item number
9-11070 (976790-001).
•
Before using battery charger, read all instructions
and cautionary markings in this manual, on
battery charger, and product using battery
charger.
_1.
WARNING:
To reduce risk of injury, charge only
nickeJ-cadmium type recha_geable batteries.
Other types of batteries may burst causing
personal injury and damage.
FOR and remove all nails from lumber
Do notexpose chargerto rainor snow.
IMPORTANT SAFETY RULES FOR BA'I-rERY
TOOLS
Use of an attachment not recommended or sold
by the battery charger manufacturer may result
in a risk of fire, electric shock, or injury to
persons.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible
hazards when not using your battery tool or
when changing accessories.
USE ONLY THE CHARGER PROVIDED WITH
YOUR BA'i-FERY TOOL. DO not substitute any
other charger. Use of another charger could
cause batteries to explode causing possible
serious injury.
Under extreme usage or temperature conditions,
battery leakage may occur. It liquid comes in
contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets in your eyes, flush them
with clean water for at least t0 minutes, then
seek immediate medical attention.
•
before drilling.
•
DO NOT CHARGE BATTERY TOOL IN A
DAMP OR WET LOCATION.
If carrying your battery tool at your side, make
sure it is not running and your finger is not on the
switch. Avoid accidental starting.
DRUGS, ALCOHOL, MEDICATION. Do not
operate tool while under the influence of drugs.
alcohol, or any medication.
DRILLING OR DRIVING SCREWS INTO
ELECTRICAL WIRING IN WALLS, CEILINGS.
OR OTHER AREAS CAN CAUSE THE BIT OR
CHUCK TO BECOME ELECTRICALLY
LIVE.
They may
•
DO NOT USE TOOL IF SWITCH DOES NOT
TURN IT ON AND OFF. Have defective switches
replaced by an authorized service center.
NEAR RRE OR HEAT.
Your batten/tool should be charged in a location
where the temperature is more than 5O°F but
less than 100°F.
CHECK DAMAGED PARTS. Before further use
of the tool. a guard or other part that is damaged
should be carefully checked to determine that it
will operate propecly and pedorm its intended
function, Check for alignment of moving pads.
binding of moving parts, breakage of pads,
mounting, and any other conditions that may
affect its operation. A guard or other part that is
damaged should be properly repaired or
replaced by an authorized service center unless
indicated elsewhere in this instruction manual
DO NOT PLACE BATTERY TOOLS OR 1HEIR
To reduce risk of damage to charger body and
cord._oull by charger body rather than cord when
disconnecting charger.
m
Make sure cord is located so that it will not be
stepped on, tnpped over, or otherwise subjected
to damage or stress.
RULES
FOR
SAFE
OPERATION
(Continued)
• Anextortion
cord
shouM
notbeused unless
•
absolutely necessary. Use of improper
extenalon cord could resuh in a risk of fire and
electric shock, if extension cord must be used,
mske s.ure:
a.
Tnst plrm on plug of extension cord are the
same number, size and shape Its those of
plug on charger.
b.
That extension cord is properly wired and in
good electrical ccad_on; and
c.
That wire size is large enough for AC
ampere rating of charger as specified
below:
Cord Length (Feet) 25'
50'
100'
Cord Size (AWG)
16
16
16
Note: AWG = American Wire Gage
DO NOT OPERATE
CHARGER
WITH A
Do not operate charger ff it has i'l)c_Jved a
sharp blow. been dropped, or otherwise
damaged in any way; take It to a qualified
servtcettlan.
•
Do not disassemble charger; take it to a
qualified serviceman when service or rapalr is
required. Incorrect reassembly may result In a
risk of electric shcck or fire.
•
To reduce risk of electric sho_k, unplug charg(
from outlet before attempting any maiotensnc_
or cleaning. Turning off controls will not reduc_
this risk.
•
Do not use charger
•
Disconnect charger from power supply when
not in use.
•
SAVE THESE INSTRUCTIONS.
Refer to then
frequently and use them to instruct others whq
may use this tool. If you loan someone this tc,
loan them these instructions also.
outdcors.
DAMAGEO CORD OR PLUG, If damaged,
have replaced immediately by a qualified
sePAceman.
Look for this symbol to point out important safety precautions.
safety is involved.
It means attention!!! Your
SAVE THESE INSTRUCTIONS
IMPORTANT
INFORMATION
FOR
RECHARGING
HOT BA1TERIES
When using your drill-driver continuously, the batteries in your battery pack will become hot. You should let a h_
battery pack coof down for approximately 30 minutes before attempting to recharge.
Note: This situation only occurs when continuous use of your drill causes the batteries to beeome hot. It does
not occur under normal circumstances. Refer to "CHARGING BATTERY PACK" for normal recharging of
betteri'-_. If the chsrger does no*_chsrge your b_ttenj pack under normal circumstances, rstum both the batten
pack and charger to your nearest Sears repair center for electrical check.
,_
WARNING:
The opera, on of any power toot can resu_ in foreign objects being thrown k_to your eyes,
which can result in severe eye damage. Before beginning power tool operation, always we
safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shidids, avalledio at Sears Retail Stores.
The
following
recommended
accessories
are currently available
at Sears Retail Stores,
•
6-Pc. Extra Length Magnite Power Bit Set
•
High Speed Bits (For Wood or Metal)._3/4
•
30-Pc. Power Scmwddver/Nutdriver
Set and Case
•
Keyles,s Chuck (Item No. _-20988)
•
17-Pc. Power ScrewditvedNutddver
Set and Case
_kWARNING:
KNOW YOUR
See Figure 1.
in. Max.
The use of attachmentsor accessoriesnotlisted mightbe hazardous.
DRILL-DRIVER
Before attempting to use any tcof familiarize yourself
with all operating features and safety requirements,
WRIST STRAP
See Figure 1.
A wriststrapis providedto reducethe chancesof
droppingyour drill-driver.P_aceone handthroughthe
wriststrap when canyingtoot.
LEVEL
BATrERY
PACK
KEYI.£SS
CHUCK
FORWARD
• REVERSE
SELECTOR
SWITCH
TRIGGER
RED
UGHT
BA'ri'ERY
CHARGER
CHARGING
STAND
BA'n'ERYPACK
SHOWN_TOOL
WRISt'St_LP
Fig. 1
_L
WARNING:
If any parts are missing, do not operate tool until the missing parts are replaced. Failure to do so
could result in poSSible serious personal injury.
A
,_
WARNING: Alwayswear safety gogglesor
safelygla_es with skle shieldswhenoperating
tools. Failureto do an couldresultIn objects
beingthrownInto youreyes, resultingin possible
sadous injury.
WARNING: Do notallowferniliadty with your
drillto make youcarein_s.Renlemberthat a
carelessfractionof 8 secondis sufficientto inflict
severe injury,
•
Connect charger to power supply.
•
Place battery pack in charging stand. Align raised
rib on battery pack with groove in charging stand.
See F/gum 1.
•
Press down on battery pack to be sure contacts on
battery pack engage propelly with contacts in
charging stand.
•
When propedy connected, the red light on charging
stand will turn on.
• Ne_ _she_r doesn_xct_ge baaery
ppck,rctum
hattery
back.
charg_rand.andshaft toyour
CHARGING BA'rrERY PACK
nearest Sears Reppir Center for elec_ceJ check.
"l_e batteryl_ickfortlgstool has hae_ shlpbad in a
lowchargecondl_m to preventpossibleproblems.
Therefore,yo,Jshouldcharge It at least3 to 5 houm
pdorto usa.
•
Note: Batterieswill not rsashfullchargetha flrcttirne
they arecharged.Allowsaveral cycles(drilling
fcllowedby recharging)tor thamto bacome fulty
charged.
•
The battery pack will become slightly warm to the
touch while charging. This is normal and does not
Indlc_e a problem.
time is
•
Do not place charger in an area of extreme heat or
cold. It will work best at normal room temperature.
•
When battades become fully charged, unplug
charger from power supply.
req,Jred
toba_=ycharged.
Am_rnurn
charge
_rneo_
5
hours
_sreq_red
torecharge
acompl_ d_charged
tool.
TO CHARGE
• Charge batterypack onlywith the chargerand
chargingstandprovided.
• Meb sum powor 8upply 18 norms! houeo
voJtage, 120 voR8, SOHz, AC only.
Nter nom_ usage, 3 to 5 hours of _
SWITCH
See Figure 2,
TO tum your drill ON, depress the switch tdgger. To
turn it OFF, release the switch trigger.
SELECTOR
CENTER PosmoN
(LOCK)
SWITCH
TRIGGER
VARIABLE
Fig. 2
SPEED
This tool has a vadable speed switch that delivers
higher speed and torque with increased tdgger
pressure. Speed is controlled by the amount of switch
trigger depression.
Note: You might hear a whistling or ringing noise from
the switch during use. DO not be concerned, this is a
normal part of the switch function.
TO INSTALL
•
•
BATTERY
DE
TO RELEASE
BATrlENT PACK
•
PACK
Lock switch tdgger on your drill by placing the
direction of rotation selector in center position.
See Figure 2.
HES
_
Place battery pack in your drill, Align raised rib
inside ddll with groove on battery pack. See
Figure 3,
Fig. 3
Make sure the latches on each side of your
battery pack snap in place and battery pack Is
secured in dhll before beginning operation.
CAU'rlON:
When placing battery pack in your
ddll, be sure raised r_b inside ddll aligns with
groove on battery pack and latches snap in place
properly. Improper assembly of battery pack can
cause damage to intema_ components.
TO REMOVE
BATTERY
PACK
•
Lock sw_tch trigger on your ddll by placing the
direction of rotation selector in center position.
See Figure 2.
•
Locate latches on end of battery pack and
depress to rsiease battery pack from your drill.
See Figure 3.
•
Remove battery pack from your drill.
SWITCH
LOCK
KEYLESS
See Figure 4.
See Figure 5.
The switch thgger can be locked in the OFF position.
This feature can be used to prevent the possibility of
accidental starting when not in use. To lock switch
trigger, place the direction of rotation selector in
center position.
Your new drifthas a keyless chuck. As the name implies,
you can hand tighten or release drill bits in the chuck
jaws. Grasp and hold the collar of the chuck with one
hand. Rotate the chuck body with your other hand. The
arrows on the chuck indicate which direction to rotate
the chuck body in order to LOCK (tighten) or UNLOCK
(release) the drill bit.
SELECTOR
CHUCK
(RELEASE)
CHUCK BODY
DRILL BIT
Loc.), /__/ /
CENTER POSITION
FORWARD
/
SWITCH
TRIGGER
-,,4,-,
_
Fig. 4
REVERSIBLE
See F/gum 4.
This tool has the feature of being reversible. The
direction of rotation is controlled by a selector located
above the switch trigger. With the drift held in normal
operating position, the direction of rotation selector
should be positioned to the left of the switch for
ddllthg. The ddlling direction is reversed when the
selector is to the right of the switch. When the selector
is in center position, the switch trigger is locked.
To stop, release switch trigger and allow the chuck to
come to a complete stop.
LOCK
(TIGHTEN)
CHUCK
COLLAR
Fig. 5
_1
WARNING:
Do not hold chuck body with one
hand and use power of the driit to tighten chuck
jaws on drill bits. Chuck body could slip ir_ your
hand or your hand could sfip and come in contact
with rotating drift bit. This could cause an
accident resulting in sehous personal injury.
_k
WARNING:
Battee/tools are always in
operating condition. Therefore, switch should
always be locked when not in use or carrying at
your side.
INSTALLING
BITS
REMOVING
See Figure 6.
See Figure 6.
•
•
Lock the switch trigger by placing the direction of
rotation selector in center position. See Figure 2.
•
Loosen the chuck jaws from dnll bit.
•
To loosen: grasp and ho_dthe collar of the chuck
with one hand, while rotating chuck body with y_Jr
other hand, Note: Rotate chuck body in the
direction of the arrow marked UNLOCK to loosen
chuck jaws.
•
DO not use a wrench to tighten or loosen the
chuck jaws.
•
Remove ddl] bit from chuck jaws.
•
•
Lock the SWitCh trigger by placing the direction of
rotation selector in center position, See Figure 2.
Open or clor,e chuck jaws to a point where the
opening is sligh_y larger than the bit size you intend
to use, Also, raise the front of your drill slightly to
keep the bit from fol_ing out of the chuck jaws.
Insert drill bit into chuck the full length of the jaws
as shown in Figure 6.
CHUCKJAWS
CHUCKBODY
BITS
ADJUSTABLE
DRILL BIT
TO ADJUST
RIGHT
_k
TORQUE
Identify the six torque indicator settings located on
the front of your ddll. See Figure 8.
•
Rotate eqjusting dng to the desired seffing.
Fig. 6
• 11ghton
thechuck
jawsonddllbit.
•
CLUTCH
•
CHUCK COLLAR
•
TORQUE
Your dhll is equipped with an adjustable torque clutch
for driving different types of screws into different
matehels. The proper setting depends on the type of
matorlal and the size of screw you are using.
TO tighten the chuck jaws on ddll bit; grasp and
hold the collar of the chuck with one hand, while
rotating the chuck body with your other hand.
Note: Rotate the chuck body io the direction of
the arrow marked LOCK to tighten chuck jaws.
Do not use a wrench to tighten or loosen the
chuck jaws.
1
2
For driving small screws.
For driving screws into soft material.
3
For driving screws into soft and herd
matohels.
4
5
For ddving screws In hard wood.
For driving large screws.
• ,1!1
Forheavyddlling.
TODECREASE
TO_OUE
WARNING:
Do not insert drill bit into check jaws
and tighten as shown in figure 7. This could cause
dnll bit to he thrown from ditlLresulting in possible
serious personal injury or damage to the chuck.
TORQUE
TO INCREASE
Fig. 7
10
,U)JIJ$11NG
RING
_
WARNING:
Always wear safety goggles or
safety glasses with side shields when operating
tools. Failure to do so could result in objects
being thrown into your eyes, resulting in possible
sedous injury,
Move the drill bit into the workpiece applying only
enough pressure to keep the bit cutting. DO not force
or apply side pressure to elongate a hole.
_L
DRILLING
See Figure 9.
WARNING:
Be prepared for binding or bit
breakthrough. When these situations occur, drill
has a tendency to grab and kick opposite to the
direction of rotation and could cause loss of
control when breaking through material. If not
prepared, this loss of control can result in
possible serious injury.
When drilling metals, use a light oil on toe drill bit to
keep it from overheating. The oil will prolong the life of
the bR and increase the drilling action.
If the bit jams in work,piece or it the drill stalls, release
switch trigger immediately. Remove the bit from the
workpiece and determine the reason for jamming.
LEVEL
DRILLING
See Figure 10.
A convenient feature provided with your dritl is a level
It is recessed in the motor housing on top of your drill.
It can be used to keep drill bit level during drilling
operations.
When ddllinghard smoothsurfacesuse a center
punchto markdesiredhole location.Thiswill prevent
the drillbitfrom slippingoffcenter as the hole is
started. However,the lowspeed featureallows
startingholes withoutcenter punchingif desired.To
accomplishthis, simplyoperate your ddllat a low
speed untilthe hole is started.
The mater_l to be drilled shouldbe secured in a vise
or with clampsto keep it from tumlogas the dditbit
rotates.
Holdtoolfirmly andplace the bit at the pointto be
drilled.Depressthe switchtriggertostart tool
Fig. 10
11
CHUCK
REMOVAL
•
See Figures 11, 12, and 13.
The chuck must be removed in order to use some
accessodes. To remove:
•
Lock the switch tdgger by placing the direction of
rotation selector in center position,
•
Insert a5/16inchorlargerallenwmnch(haxkey
wrench) intc the chuck of your drill and tighten tha
chuck jaws securely.
•
Tap the a,an wretch sharply with a mallet in a
c_ockwise direction. See Figure 11. This will
loosen the screw in the chuck for easy removal
Insert allen wrench in chuck and tighten chuck
jaws securely. Tap sharply with a mallet in a
counterclockwise direction. This will loosen chuck
on the spindle, n can now be unscrewed by hand.
See Figure 13.
MALLET
KETLESS CHUCK
Fig, 13
TO RETIGHTEN
A LOOSE
CHUCK
The chuck may become loose on spindle and develop
a wobble. Also, the chuck screw may become loose
causing the chuck jaws to bind and prevent them from
closing. To tighten, follow these steps:
ALLEN
WRENCH
•
•
Lock the switch tdgger by placing the direction of
rotetion selector in center position.
•
Insert allen wrench into chuck and tighten chuck
jaws securely, Tap allen wrench sharply with a
mallet in a clockwise direction, This will tighten
chuck on the spindle,
•
Open the chuck jaws and remove allen wrench.
•
"Rghten the chuck screw, Note: The chuck screw
has left hand threads.
Fig. 11
Open chuck jaws and remove allen wrench.
Remove the chuck screw by turning d in a clockwise direction. See Figure 12, Note: The screw
has loft hand threads,
Fig. 12
12
A
WARNING: When servicing,use onlyidentical
Craftsmanreqtacementparts. Use of any other
pert may createa hazardor cause product
damage,
Only the parts shown on pads list, page fifteen, are
intended to be repaired or reptaced by the customer,
All other parts should be replaced by a qualified
se n.'ice technician at an authorized service facility.
Avoid using solvents when cJeantng plastic parts.
Most plastics are susceptible to darnege from various
types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil,
grease, etc.
_
_
Do not abuse power tools. Abusive practices can
damage tool as well as workplace.
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based
products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damnge, weaken or
destroy plastic.
BATTERIES
Your ddit's pettei'y peck is equipped with 9 nickstcadmium rechergeable bettedes. Length of service
from each charging wilt depend on the type of work
you are po_ng.
The batteries in this too4have been designed to
provide maximum trouble free life. However, like ait
batteries, they will eventually wear out. Do not
disassemble battary pec_ and attempt to reqtaca the
pettedee. HandUng of these hettades, especially when
wearing dnge and jewelry, could resuR in a serious
bum.
recycta o_ dispose of properly.
This product contains nickelcadmium batteries. Lecal, state or
_
o pfe_tve
reeources,
pid_me
federal
laws rmtur_
may prohibit
disposal
of
nickel-cadmium battehes in ordinary
trash.
Consult your local waste authority for information
regarding available recy_ing and/or disposal options.
WARNING:
Do not attempt to modify this tool or
create accessopes not recommended for use
w_h this tool. Any such alteration or modification
is misuse and could result in a hazardous
COndition leading to possible sedous personal
injury.
To obtain the longest possible battery life, we suggest
the following:
•
Store and charge your batteries in a cool area,
Temperatures above normal room temperature
will shorten battery life,
•
Never store batteries in a dischergeq condition,
Recharge them immediately after they are
discharged.
•
All hettbaes gradually lose thstr charge. The
higher the temperature the quicker they _
their
charge. If you store your tool for idng periods of
time without using it, recharge the batteries every
month or two. This practice will protorig battery
life.
BAI"I'ERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
_
WARNING:
Upon removal, cover the battery
pack's terminals with heavy duty adhesive tape.
Do not attempt to destroy or disassemble battery
peck or remove any of its components. Nickelcadmium better;as must be recycled or disposed
of properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these wamings could result in fire
and/orseridus
13
injury.
14
CRAFTSMAN 3/8 In. CORDLESS DRILL-DRIVER
- MODEL NO. 973.111330
[
number in all correspondence regarding your 3/8 in. CORDLESS DRILL-DRIVER or when ordering
The
model
repair
pads.number will be found on a plate attached to the motor housing. Always mention the model
SEE BACK PAGE FOR PARTS ORDERING
2
INSTRUCTIONS
\
4
PARTS LIST
Key
NO.
Part
Number
Description
1
616478-OO3
Screw (Speoial) ........................................................
1
2
973094-001
Chuck (Item No. _o20988) ........................................
1
Quart.
3
• 9-11015
Battery Pack (Includes P,att No. 981482-001 ) ......... 1
4
* _-11070
Charger w/Charging Stand
(Includes Part No. 976790-001 ) ..............................
977385-001
972000-720
• Can
Be Purchased
Carrying Case - Not Shown ....................................
Owner's Manual
Thru
RSOS
(Retail
18
Special
Order
System)
1
1
J
In U.S.A. or Canada
for in-home major brand repair service:
Call 24 hours a day, 7 days a week
1-800-4-MY-HOME
_" (1-800-469-4663)
Para pedir servicio de reparacibn a domicilio- 1-800-676-5811
Au Canada pour tout le service ou les pi_ces - 1-800-469 4663
For the repair or replacement parts you need:
Call 6 a.m. - 11 p.m. CST, 7 days a week
Parts Direct _
1-800-366-PART
(1-800-366-7278)
Para ordenar piezas con entrega a domicUio- 1-800-659-7084
For the location of a Sears Service Center in your area:
Call 24 hours a day, 7 days a week
1-800-488-1222
To purchase or inquire about a Sears Maintenance Agreement:
Call 7 a.m. - 5 p.m. CST, Monday - Saturday
1-800-827-6655
Download PDF