Craftsman Harmonic Balancer Puller Owner's Manual

Craftsman Harmonic Balancer Puller Owner's Manual
 | CRAFTSMAN
To Remove Harmonic Balancer:
Before removing harmonic balancer, it may be
necessary to first remove the radiator.
1. Remove the retaining bolt from the balancer.
2. Carefully choose the proper size bolts that fit the holes
in the balancer. This kit includes:
o er black oxide-plated 3/8-24 x 2-in. fine pitch
olts
* Three zinc-plated 5/16-18 x 2-in. coarse pitch
bolts
o Three yellow-plated M8-1.25 x 80mm metric bolts
o ho black oxide-plated 3/8-16 4-in. coarse pitch
olts
3. Insert bolts through the slots in the puller, making
sure that the washer head rests on the FLAT side of
the casting.
4. Carefully thread the bolts into the balancer evenly.
5. Select the flat or pointed cap, as needed, and fit over
the end of the large center forcing screw. Turn forcing
screw slowly until balancer is removed.
в
[947626 |
To Remove Steering Wheel:
1.
2.
. Turn the large forcing PE
slowly until the wheel i
DO NOT use a hammer to remove the steering wheel.
Damage to the wheel can result.
Select the bolts included that EXACTLY match the
hole diameter and pitch with those on the steering
wheel. If the bolts do not match, do not use this
puller.
. Check for alignment marks on the wheel and shaft. If
there are no marks, make them on the wheel before
removing it to help ease re-alignment during assembly.
. Insert bolts through puller casting
the washer head of the bolt is
seated on the FLAT side of the
and screw into wheel. Make sure
casting. |
e wheel 15 re 53496 47626
Ere eras
other rights which vary from state to state.
FULL UNLIMITED WARRANTY ON CRAFTSMAN HAND TOOLS
If this Craftsman Hand Tool ever fails to provide complete satisfaction,
RETURN IT TO THE NEAREST SEARS STORE OR OTHER
CRAFTSMAN OUTLET and it will be replaced, free of charge.
This warranty gives you specific legal rights, and you may also have
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
NOTE: Always wear safety
glasses or eye shields.
CONTENTS MADE IN USA
Sold by Sears, Roebuck and Co
Hoffman Estates, IL 60179
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement