Plug In Craftsman LED Worklight I.S.
10/5/06
9:37 AM
Page 1
Maintenance
Before performing any maintenance, ALWAYS unplug worklight. Remove dirt and grime as soon as
it accumulates. Use a soft, damp cloth and a mild soap, if needed. Be sure not to get the electrical
plug wet. NEVER submerge any part of the worklight in any solution to clean it. DO NOT USE
solvents such as gasoline, turpentine, etc. to clean unit. Aerosols and other chemicals may fog
the clear polycarbonate lens.
One Year Full Warranty on Worklight
If this product fails due to a defect in material or workmanship within one year from the date of
purchase, RETURN IT TO YOUR NEAREST SEARS STORE OR CRAFTSMAN OUTLET IN
THE UNITED STATES, and it will be replaced free of charge. This warranty applies for only
90 days from the date of purchase if this Craftsman Worklight is used for commercial or rental
purposes. This warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Assembly or operation questions? Call 1-800-334-6871
www.craftsman.com 9/2006
Printed in China
325-1584
Owner’s Instructions
Caution: Read all instructions and warnings before operating.
SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS!
3.
2.
1.
ALWAYS make certain that the power source conforms to the
requirements on the fixture.
This fixture MUST ALWAYS BE USED in accordance with all
electrical and safety codes and ordinances, including the most
recent National Electric Code (NEC) and with the Occupational
Safety and Health Ace (OSHA) Volume 1 on General Industry
Standards and interpretations.
DO NOT handle this fixture or try to plug it in when your hands
are wet or damp or when you are standing on a wet or damp
surface or in water.
NOTE: To avoid serious injury or death from electrical
shock or fire:
4.
DO NOT disassemble fixture. The fixture does not have any user
serviceable parts.
LED Work Light
Model No. 73903
5.
FIXTURE IS NOT WATERPROOF and is not intended for use in showers, saunas, or in
potentially wet locations. ALWAYS keep this fixture away from sinks, tubs, showers, etc.
NEVER ATTEMPT TO PICK UP PLUGGED-IN APPLIANCES WHEN THEY FALL INTO
WATER BECAUSE FATAL ELECTROCUTION COULD RESULT.
This fixture IS ONLY FOR USE ON 110-120V AC circuits.
Page 2
6.
This fixture is intended for use as a general indoor lighting. DO NOT use in potentially
dangerous locations, such as flammable or explosive atmospheres.
9:37 AM
7.
NEVER operate the light with the clear protective lens removed.
10/5/06
8.
KEEP OUT OF REACH OF CHILDREN.
Plug In Craftsman LED Worklight I.S.
9.
10. KEEP AWAY from excessive heat or flame.
11. DO NOT short the positive-negative terminals together.
12. DO NOT look directly into the light.
Operation
1. Plug power cord into any 110-120V AC standard wall outlet.
2. Depress switch in the handle one time to turn on the LED lights.
3. Depress switch a second time to turn off the LED lights
Hanging Utility Light
1. Hanging hook can rotate 360°.
">
