Knives and Replacement Blades, Replacement Blades, Blade

Knives and Replacement Blades, Replacement Blades, Blade
Enclosed is the updated
C Section of your
Wallace Hardware Catalog.
Please remove the old section
and replace with this new one
dated November 2016.
Visit us on the web at
www.wallacehardware.com
Table of Contents
Category
Page
Hand & Power Tools...................................................................................... 1-418
Hammers and Mallets......................................................................................................................1-12
Hammers................................................................................................................................................................1-11
Mallets................................................................................................................................................................. 11-12
Mauls, Axes and Wedges...............................................................................................................12-17
Mauls...................................................................................................................................................................12-13
Axes.....................................................................................................................................................................13-15
Wedges............................................................................................................................................................... 15-16
Peavies and Hooks..............................................................................................................................................16-17
Wrecking, Claw, Pry and Digging Bars......................................................................................... 17-23
Nail Pullers and Claw Bars.................................................................................................................................. 17-18
Wrecking Bars.................................................................................................................................................... 19-20
Pry Bars............................................................................................................................................................. 20-22
Digging Bars...................................................................................................................................................... 22-23
Chisels.......................................................................................................................................... 23-27
Wood Chisels.....................................................................................................................................................23-25
Brick Chisels............................................................................................................................................................26
Floor Chisels........................................................................................................................................................... 26
Cold Chisels.............................................................................................................................................................27
Punches and Nail Sets................................................................................................................. 28-30
Punches............................................................................................................................................................. 28-29
Nail Sets.................................................................................................................................................................. 30
Planes and Files........................................................................................................................... 30-37
Planes................................................................................................................................................................ 30-32
Files....................................................................................................................................................................32-37
Knives and Replacement Blades..................................................................................................37-49
Utility Knives...................................................................................................................................................... 37-42
Snap-Off Knives................................................................................................................................................. 42-44
Flooring Knives....................................................................................................................................................... 44
Replacement Blades..........................................................................................................................................45-49
Hand Saws and Replacement Blades.......................................................................................... 49-62
Hand Saws.........................................................................................................................................................49-59
Hand Saw Blades.............................................................................................................................................. 60-62
Cutters, Snips and Pliers..............................................................................................................62-90
Cutters and Nippers.......................................................................................................................................... 62-69
HVAC Tools............................................................................................................................................................. 70
Snips.................................................................................................................................................................. 70-75
Pliers.................................................................................................................................................................. 75-90
Wrenches.....................................................................................................................................90-121
Adjustable Wrenches and Sets......................................................................................................................... 90-92
Open End and Box End Wrenches and Sets......................................................................................................92-93
Combination Wrenches and Sets...................................................................................................................... 93-97
1/4" Socket Wrenches and Accessories............................................................................................................ 97-101
3/8" Socket Wrenches and Accessories.........................................................................................................102-107
Table of Contents
Category
Page
1/2" Socket Wrenches and Accessories...........................................................................................................107-114
3/4" Socket Wrenches and Accessories.................................................................................................................115
Hex Keys and Sets........................................................................................................................................... 115-119
Pipe Wrenches................................................................................................................................................. 119-121
Screwdrivers and Nutdrivers......................................................................................................121-135
Screwdrivers....................................................................................................................................................121-133
Nutdrivers....................................................................................................................................................... 133-135
Tool Sets....................................................................................................................................135-136
Home and Shop Tool Sets.............................................................................................................................. 135-136
Routers and Router Bits............................................................................................................. 136-141
Routers.................................................................................................................................................................. 136
Router Bits and Accessories............................................................................................................................136-141
Rotary Tools and Accessories.................................................................................................... 141-154
Rotary Tools and Saws.................................................................................................................................... 141-142
Bits, Cutters and Grinders...............................................................................................................................142-154
Power Sanders, Grinders and Accessories............................................................................... 154-163
Power Sanders................................................................................................................................................154-155
Power Grinders......................................................................................................................................................156
Wheels, Cups and Brushes............................................................................................................................. 157-163
Power Saws, Blades and Accessories......................................................................................163-202
Circular Saws and Blades............................................................................................................................... 163-172
Jigsaws and Blades......................................................................................................................................... 172-181
Reciprocating Saws......................................................................................................................................... 181-194
Compound Miter Saws and Blades....................................................................................................................... 194
Cut-Off Saws and Blades................................................................................................................................ 194-195
Table Saws and Blades.................................................................................................................................. 195-196
Chainsaws and Chains...................................................................................................................................196-202
Drills, Bits and Accessories......................................................................................................202-252
Augers, Hand Drills and Bits......................................................................................................................... 202-203
Power Screwdrivers...................................................................................................................................... 203-204
Power Drills and Drivers................................................................................................................................ 204-213
Drill Accessories.............................................................................................................................................213-220
Drill Bits......................................................................................................................................................... 220-243
Hole Saws......................................................................................................................................................244-252
Insert Bits and Nutsetters........................................................................................................ 252-268
Single End Insert Bits..................................................................................................................................... 252-261
Double End Insert Bits................................................................................................................................... 261-264
Nutsetters and Bit Accessories..................................................................................................................... 264-268
Power Hammers and Fasteners.............................................................................................. 268-269
Power Hammers............................................................................................................................................268-269
Air Compressors and Attachments.......................................................................................... 269-285
Air Compressors and Parts............................................................................................................................269-273
Air Hoses, Guns and Fittings......................................................................................................................... 273-285
Pulleys and Belts......................................................................................................................285-288
Pulleys........................................................................................................................................................... 285-286
Table of Contents
Category
Page
V-Belts........................................................................................................................................................... 286-288
Soldering Tools, Welders and Supplies................................................................................... 288-294
Soldering Guns and Irons..............................................................................................................................288-289
Welders and Welding Supplies..................................................................................................................... 289-294
Pipe Bending and Cutting Hardware.......................................................................................295-299
Pipe Bending Hardware....................................................................................................................................... 295
Pipe Cutting Hardware..................................................................................................................................295-299
Bolt Threading and Extraction Tools....................................................................................... 299-305
Bolt Threading Hardware..............................................................................................................................299-303
Extraction Tools.............................................................................................................................................304-305
Vises and Clamps...................................................................................................................... 305-311
Vises..................................................................................................................................................................... 305
Clamps............................................................................................................................................................ 305-311
Concrete and Masonry Tools.................................................................................................... 311-328
Concrete Finishing Tools................................................................................................................................. 311-317
Flooring Finishing Tools..................................................................................................................................317-319
Masonry Finishing Tools................................................................................................................................ 319-326
Drywall Finishing Tools................................................................................................................................. 326-328
Measuring and Marking Tools................................................................................................. 328-362
Levels and Replacement Parts......................................................................................................................328-338
Marking Tools................................................................................................................................................338-345
Measuring Tapes and Rules..........................................................................................................................345-355
Squares and Straight Edges..........................................................................................................................355-362
Nailers, Staplers and Fasteners............................................................................................... 362-384
Hammer Tackers, Staplers and Fasteners.................................................................................................... 362-370
Power Nailers, Staplers, Fasteners and Accessories....................................................................................370-382
Fuels, Batteries, Lubricants and Parts...........................................................................................................382-384
Sawhorses and Accessories............................................................................................................384
Sawhorses and Sawhorse Brackets..................................................................................................................... 384
Safety Kits, Apparel and Equipment........................................................................................ 384-404
Safety Kits......................................................................................................................................................384-386
Safety Apparel and Equipment..................................................................................................................... 386-404
Carpenter Bags, Aprons and Belts........................................................................................... 404-412
Tool Boxes and Totes....................................................................................................................................404-406
Carpenter Toolbelts and Bags...................................................................................................................... 406-409
Work Belts, Suspenders and Aprons............................................................................................................. 409-410
Tool Holders....................................................................................................................................................410-412
Magnets and Magnetic Tools.................................................................................................... 412-416
Magnets.......................................................................................................................................................... 412-415
Magnetic Tools................................................................................................................................................415-416
Industrial Strapping, Wraps and Tensioners............................................................................. 416-418
Steel Strapping and Accessories.................................................................................................................... 416-417
Plastic Strapping and Accessories.................................................................................................................. 417-418
Stretch Wraps, Poly Foam and Twine....................................................................................................................418
Hand & Power Tools
Hammers and Mallets, Hammers, Curve
Claw Hammers
Hammers and Mallets, Hammers, Curve
Claw Hammers
STANLEY CURVED CLAW STEEL HANDLE
HAMMERS
PLUMB CURVED CLAW STEEL HANDLE
HAMMERS
Heat treated, high carbon steel head for greater durability. Rim-tempered face
helps reduce chipping. Fully polished and laser marked head attached to a
chromed and shot-blasted tubular steel shaft. Rubber grip has a textured
surface for better grip and comfort. Flared grip end to help prevent the
hammer from slipping. Curved claw. 16 ounce.
Solid steel black body. Hi-Viz orange grip.
ITEM #
264377
DESC
ITEM #
341185
391301
SP UOM PRICE
[email protected] EA
19.26
A
CV.ACX
51-126 CURVED CLAW 1PC NAIL HAMMER
16OZ STEEL
DESC
SS16CN CURVED HAMMER 16OZ STAINLESS
STEEL
SS20CN CLAW HAMMER CURVE 20 OZ
STAINLESS STEEL
SP UOM PRICE
[email protected] EA
23.11
A
CH.VHX
[email protected] EA
25.86
A
CY.HEX
PLUMB CURVED CLAW FIBERGLASS
HANDLE HAMMERS
Premium hammer with Permabond handle to head construction. Cushion grip.
Octagon Face.
STANLEY CURVED CLAW GRAPHITE
HANDLE HAMMERS
Graphite core provides strength and durability. Has the
feel of wood but with overstrike protection. Rim
tempered end. High carbon, polished steel head is
precision balanced. New ribbed grip handle allows air to cool hand and
channel sweat away. Patented head-to-handle construction. Flared grip to
prevent hammer from slipping off hand.
ITEM #
163791
DESC
SP
[email protected]
51-505 CURVE CLAW HAMMER 16OZ
UOM
EA
A
PRICE
19.23
CV.RVX
ITEM #
305456
11-403N FA572 CLAW HAMMER 13 OZ
DESC
SP
[email protected]
308145
11402N FA57 CLAW HAMMER 16 OZ
[email protected]
308137
11400N FA571 CLAW HAMMER 20 OZ
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
19.47
CV.HEX
18.41
CO.AVX
18.76
CV.CEX
PLUMB CURVED CLAW WOOD HANDLE
HAMMERS
Hickory handle. Curved claw. Full polished head and striking face. Factory
balanced. Octagon face.
ITEM #
345377
STANLEY CURVED CLAW WOOD
HANDLE HAMMERS
DESC
SP
[email protected]
11436 CLAW HAMMER 16OZ HAMMER
UOM
EA
A
PRICE
18.58
CV.CAX
High carbon tool steel. Fully heat treated. Hardwood handle with triple
wedging system. Rim beveled and crowned striking surface.
ESTWING CLAW NAIL HAMMER
ITEM #
397490
Nylon vinyl shock reduction grip. Curved claw solid
steel hammer. The head and handle are fully polished and forged in one
piece. Smooth face. 16 oz. 13 inch overall length.
DESC
51-713 CURVED CLAW NAIL HAMMER 13OZ
W/WOOD HDL
SP UOM PRICE
[email protected] EA
7.76
A
E.ARX
ITEM #
334537
STANLEY CURVED CLAW WOOD
HANDLE HAMMERS
High carbon steel head with black finish and polished bell face. Handle is
stained wood.
ITEM #
368636
365130
DESC
51-613 CURVE CLAW NAIL HAMMER 7OZ
W/WOOD HDL
51-616 CURVE CLAW NAIL HAMMER 16OZ
W/WOOD HDL
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
7.45
A
E.EAX
[email protected] EA
7.95
A
E.YAX
DESC
E3-16C CLAW HAMMER 16OZ
SP
[email protected]
UOM
EA
A
PRICE
29.49
LZ.AVX
ESTWING FRAMING NAIL CLAW
HAMMER
Nylon vinyl shock reduction grip. Solid steel framing hammer has a longer
handle for more striking power. The head and handle are fully polished and
forged in one piece. Smooth face. 22 oz. 16 inch overall length.
ITEM #
535176
DESC
E3-22C CLAW HAMMER- CURVED LONG HDL
22OZ
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
43.40
A
OL.XLX
1
Hand & Power Tools
Hammers and Mallets, Hammers, Curve
Claw Hammers
Hammers and Mallets, Hammers, Curve
Claw Hammers
ESTWING CLAW NAIL HAMMER
GREAT NECK SHEFFIELD COMPACT
DESIGN MINI CLAW HAMMER
Leather grip. Solid steel head and handle are forged in
one piece. Smooth face. 16 oz. 12.5 inch overall length.
ITEM #
334618
DESC
E16C CLAW HAMMER 16OZ
SP
[email protected]
UOM
EA
A
PRICE
38.58
LA.HEX
Sheffield Compact Design Mini Claw Hammer. 8 oz.
Magnetic nail groove for convenience. Drop forged
steel for strength and durability. Compact design for hard to reach places.
Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
ITEM #
237205
GREAT NECK 16 OZ. FIBERGLASS
HANDLE CLAW HAMMER
DESC
58550 MINI CLAW HAMMER 8OZ
SP
[email protected]
UOM
EA
A
PRICE
9.77
E.AXZ
Fiberglass provides extra strength Drop forged construction.
ITEM #
578797
DESC
SP
[email protected]
HG16C CLAW HAMMER 16OZ NEON
UOM
EA
A
PRICE
13.47
H.YLX
Sheffield Solid Steel Curved Claw Hammer. Solid one piece design for added
power. Anti-slip and anti-vibration handle. Drop forged steel for strength and
durability. Ergonomic rubber grip overlay with Sheffield Oval-Grip pattern.
GREAT NECK 8 OZ. CLAW HAMMER
Fully mirror polished head, drop forged. Octagon
shaped neck. Smooth face.-8 oz head. Color/Finish: Fire finished hardwood
handle.
ITEM #
125512
DESC
SP
[email protected]
M8C WOOD CLAW HAMMER 8OZ
UOM
EA
A
PRICE
6.07
O.EHX
GREAT NECK CURVED CLAW WOOD
HANDLE HAMMER
Fully mirror polished head. Drop forged, fine finished hardwood handle.
Octagon shaped neck. Forged and Heat treated to ANSI Spec. Requirements.
13 oz.
ITEM #
165425
DESC
M13C CLAW HAMMER DROP FORGED WOOD
HDL 13OZ
ITEM #
237167
DESC
58551 CURVED CLAW HAMMER 16OZ
STEEL
GREAT NECK SHEFFIELD FIBERGLASS 16
OZ. CURVED CLAW HAMMER
Sheffield Fiberglass 16 oz. Curved Claw Hammer. Fiberglass handle for
reduced vibration and lighter feel. Fully polished head to resist rust.
Ergonomic rubber grip overlay with Sheffield Oval-Grip pattern.
ITEM #
237183
DESC
58560 CURVED CLAW HAMMER 16OZ
FIBERGLASS
SP UOM PRICE
[email protected] EA
19.09
A
CZ.OZX
HOWARD BERGER 8 OZ. CLAW
HAMMER WITH WOODEN HANDLE
16 oz. Our highest quality. Contractor Series. Patented
laser notched anti-slip hickory handle. Drop forged fully polished head.
DESC
SP UOM PRICE
[email protected] EA
17.38
A
CX.OCX
SP16C CLAW HAMMER 16OZ W/WOOD
HANDLE
HOWARD BERGER 8 OZ. CLAW HAMMER WITH WOODEN HANDLE
ITEM #
236233
DESC
SP
HOWARD BERGER 16 OZ. CLAW
HAMMER
Drop forged. Hardwood hickory handle. Highly mirror polished. 16 oz.
Drop-forged steel head. Wooden handle.
ITEM #
578770
ITEM #
236292
DESC
MV16C CLAW HAMMER W/WOOD HANDLE
SP UOM
[email protected] EA
A
PRICE
8.94
E.CEX
UOM PRICE
4.55
A
L.HXZ
96618 CLAW HAMMER WOOD HANDLE 8OZ [email protected] EA
GREAT NECK CURVED CLAW WOOD
HANDLE HAMMER
2
SP UOM PRICE
[email protected] EA
30.97
A
CA.OAX
SP UOM PRICE
[email protected] EA
8.08
A
V.HVX
GREAT NECK CLAW HAMMER
ITEM #
107816
GREAT NECK SHEFFIELD SOLID STEEL
CURVED CLAW HAMMER
DESC
SP
UOM PRICE
7.89
A
V.EAX
96612 CLAW HAMMER WOOD HANDLE 16OZ [email protected] EA
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Hammers and Mallets, Hammers, Curve
Claw Hammers
Hammers and Mallets, Hammers, Curve
Claw Hammers
HOWARD BERGER 16 OZ. STEEL CLAW
HAMMER
VAUGHAN 19-OZ CALIFORNIA FRAMER
Drop-forged. Steel head. Tubular steel handle.
ITEM #
236306
DESC
SP
UOM PRICE
11.95
A
R.YAX
96600 CLAW HAMMER STEEL HANDLE 16OZ [email protected] EA
HOWARD BERGER 16 OZ. CLAW
HAMMER
DESC
SP UOM PRICE
[email protected] EA
10.49
A
R.XYX
96616 CLAW HAMMER FBRGLS HANDLE
16OZ
STANLEY ANTIVIBE GRAY FIBERGLASS
HAMMER
Features a forged high carbon steel head for maximum durability. Fiberglass
handle absorbs shocks and vibrations from the end user. Its diamond
patterned handled grip features a flared end to help prevent the hammer from
slipping from hand during use.
ITEM #
231401
231428
DESC
51-625 CURVE CLAW HAMMER 16OZ GRAY
FIBERGLASS
51-627 RIP CLAW HAMMER 20OZ GRAY
FIBERGLASS
SP UOM PRICE
[email protected] EA
12.60
A
Y.RXZ
[email protected] EA
13.56
A
CX.OZX
STANLEY FIBERGLASS JACKETED
NAILING HAMMER
Fiberglass core adds strength and provides the feel of wood. Yellow-colored
shaft for easy product visibility. Exclusive rim temper reduces incidences of
chipping or spalling. Curved claw, smooth face. Overall length: 13 inches.
ITEM #
446440
446491
DESC
51-621 NAILING HAMMER JACKETED 16OZ
FIBERGLASS
51-624 NAILING HAMMER JACKETED 20OZ
FIBERGLASS
SP UOM PRICE
[email protected] EA
12.51
A
Y.EXZ
[email protected] EA
13.38
A
CX.CRX
VAUGHAN 23-OZ CALIFORNIA FRAMER
Fully polished head and claws. Octagon neck, hatchet
eye. Extra-large striking face white hickory handle.
Triple wedged into eye. Dimensions: Overall Length
End to End: 17.25 in. Overall Width Side to Side: 1.63 in. Overall Depth Front to
Back: 6.25 in. Overall Product Weight: 2.14 Pounds.
ITEM #
145343
DESC
SP
UOM
CF1 CALIFORNIA FRAMING HAMMER 23 OZ [email protected] EA
www.wallacehardware.com
ITEM #
522767
DESC
SP UOM PRICE
27.42
A
LX.RLX
CF2HC CALIF. FRAMING HAMMER MF-19 OZ [email protected] EA
Hammers and Mallets, Hammers, Rip Claw
Hammers
Drop-forged steel head. Fiberglass handle.
ITEM #
236330
Polished forged head. Best grade 16 inch curved
hickory handle for comfort and leverage. Extra large
milled face. Dimensions: Overall Length End to End: 16
in. Overall Width Side to Side: 1.5 in. Overall Depth Front to Back: 5.88in.
Overall Product Weight: 1.86 Pounds.
A
PRICE
29.42
LZ.CLX
STANLEY FATMAX 28 OZ. STEEL
HAMMER
Patented Anti-Vibe? technology minimizes vibration and shock at impact.
Forged, 1-piece steel construction for increased strength and durability. Slipresistant handle for a secure grip and added comfort. Precision balanced
heads for user comfort and control.
ITEM #
169227
DESC
FMHT51295 FATMAX 1PC STEEL HAMMER
28OZ
SP UOM PRICE
[email protected] EA
32.57
A
LE.HRX
STANLEY STEEL HANDLE RIP CLAW
FRAMER HAMMERS
Anti Vibe steel rip claw hammer. One piece double forged steel head and
handle for superior swing and greater durability. Patented tuning fork design
reduces harmful vibrations three times more than the leading one-piece
forged steel hammer. Unique grip design for both framers and nail hammers.
Patented ergonomic handle designed for multiple grip positions. Rubber grip
molded directly onto shaft. Specially textured handle grip for improv
ITEM #
237892
DESC
SP UOM PRICE
24.48
A
CA.OZX
FMHT51293 FAT MAX 1PC 20 OZ RC HAMMER [email protected] EA
STANLEY TOOLS FATMAX XTREME ANTIVIBE RIP
CLAW NAILING HAMMER
Patented torsion control grip technology reduces the effects of
torque on wrists and elbows. Patented AntiVibe technology
minimizes vibration and shock at impact. Precision balanced - feel
the difference. Forged, one-piece steel construction for increased
strength and durability.
ITEM #
467812
DESC
51-163 SMOOTHNAILING HAMMER RC
ANTIVIBE 16OZ
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
26.68
A
LX.CAX
3
Hand & Power Tools
Hammers and Mallets, Hammers, Rip Claw
Hammers
Hammers and Mallets, Hammers, Rip Claw
Hammers
STANLEY STEEL ANTIVIBE FRAMING
HAMMER
STANLEY WOOD HANDLE RIP CLAW
HAMMERS
Antivibe III high carbon polished steel head. Smooth face. Rip claw. Patented
shank materials designed to reduce vibrational energy generated during
repetitive hammering. Comfort-grip is designed to reduce slip and feel
comfortable, as well as secure multiple grip positions.
Wood Handle Nail Hammer. High-carbon, steel head. Fully heat treated and
polished bell face. Hickory handle.
ITEM #
124842
DESC
SP
[email protected]
51-177 FRAMING HAMMER AVX 22OZ
UOM
EA
A
PRICE
32.56
LV.VZX
One piece double forged steel head and handle for superior swing and
greater durability. Patented tuning fork design reduces harmful vibrations
three times more than the leading one-piece forged steel hammer. Unique
grip design for both framers and nail hammers. Patented ergonomic handles
designed for multiple grip positions. Rubber grip molded directly onto shaft.
Specially textured handle grip for improved performance even when wet.
DESC
51-944 RIP CLAW HAMMER 20OZ
SP
[email protected]
UOM
EA
A
PRICE
28.26
LC.OCX
Graphite core provides strength and durability. Has the "feel" of wood but with
overstrike protection. Rim tempered end. High carbon, polished steel head is
precision balanced. New ribbed grip handle allows air to cool hand and
channel sweat away. Patented head-to-handle construction. Flared grip to
prevent hammer from slipping off hand.
DESC
51-508 RIP CLAW HAMMER 20OZ
SP
[email protected]
UOM
EA
A
PRICE
22.56
CH.LOX
Fiberglass handle bonded with polyester resin for strength and balance.
Design eliminates possibility of head flying off. Rim Tempered face reduces
chipping. Contoured vinyl grip. Ripping Claw.
4
DESC
Patented torsion control grip technology reduces the effects of torque on
wrists and elbows. AntiVibe technology minimizes vibration and shock at
impact. Magnetic nail start feature for extended reach and one-handed nailing
capability. Forged, one-piece steel construction .
ITEM #
124818
51-853 RIP HAMMER 16OZ STEEL
DESC
SP
[email protected]
124826
51-855 RIP HAMMER 20OZ STEEL
[email protected]
124834
51-167 FRAMING HAMMER AVX 22OZ
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
21.87
CR.RZX
28.83
LC.YRX
32.33
LV.LXZ
Forged steel head designed for larger striking surface and better overall
balance. Rim-tempered edge helps reduce chipping. Checker face design to
provides nail grip. Specially designed magnetic nail starter for one-hand nail
setting. Contoured hand-grip provides better control and prevents hammer
from slipping. Hickory handle. 22 oz. 18 in. overall length.
ITEM #
446424
DESC
51-402 FRAMING HAMMER 22OZ HICK AXE
HANDLE
SP UOM PRICE
[email protected] EA
28.06
A
LC.HOX
PLUMB STEEL HANDLE RIP CLAW
HAMMERS
STANLEY FIBERGLASS HANDLE RIP
CLAW HAMMERS
ITEM #
305332
SP UOM PRICE
[email protected] EA
11.93
A
A.YHX
STANLEY WORKS FATMAX FRAMING
HAMMER
STANLEY GRAPHITE HANDLE RIP CLAW
HAMMERS
ITEM #
163821
DESC
51-716 RIP CLAW NAIL HAMMER 16OZ
W/WOOD HDL
STANLEY ANTIVIBE FATMAX RIP
HAMMER
STANLEY STEEL HANDLE RIP CLAW
HAMMERS
ITEM #
099317
ITEM #
486493
SP UOM PRICE
20.91
A
CE.HZX
51-518 RIP CLAW HAMMER 16OZ FIBERGLASS [email protected] EA
Solid steel hammers for ultimate strength. Full polished head that will never
come off. Cushion grip for positive hole. Well balanced for extra power with
less fatigue. Steel handle. Red handle for easy identification. Anti-Shock grip.
ITEM #
150983
151009
DESC
SS22RCFN RIP HAMMER 22OZ CHECKER
FACE SS
SS28RCFN RIP HAMMER 28OZ CHECKER
FACE SS
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
29.62
A
LZ.VXZ
[email protected] EA
32.65
A
LV.ECX
www.wallacehardware.com
Hand & Power Tools
Hammers and Mallets, Hammers, Rip Claw
Hammers
Hammers and Mallets, Hammers, Rip Claw
Hammers
PLUMB STEEL HANDLE RIP CLAW
HAMMERS
ESTWING STEEL HANDLE RIP CLAW
HAMMERS
Solid steel hammers for ultimate strength. Full polished head that will never
come off. Cushion grip for positive hole. Well balanced for extra power with
less fatigue. Steel handle. Red handle for easy identification. Anti-Shock grip.
Plain face.
Full polished, straight claw, leather grip. Steel handle.
ITEM #
334634
E16S RIPPING HAMMER 16OZ
SP
[email protected]
ITEM #
391328
334642
E20S RIPPING HAMMER 20OZ
[email protected]
341177
391344
DESC
SP UOM PRICE
22.94
A
CH.OXZ
[email protected] EA
25.68
A
CY.CHX
[email protected] EA
29.62
A
LZ.VXZ
DESC
SS16RN RIP HAMMER 16OZ STAINLESS STEEL [email protected] EA
SS20RN RIP HAMMER 20OZ STAINLESS
STEEL
SS22RN RIP HAMMER 22OZ STAINLESS
STEEL
UOM
EA
A
EA
A
PRICE
38.58
LA.ERX
43.59
OL.CEX
ESTWING STEEL HANDLE RIP CLAW
HAMMERS
Full polished, straight claw, nylon-vinyl grip, milled face. Steel handle.
PLUMB FIBERGLASS HANDLE RIP CLAW
HAMMERS
ITEM #
331023
This is a premium hammer with Permabond handle to head construction.
Cushion grip. Bell Face.
ITEM #
305782
11415N FA57R CLAW HAMMER 16 OZ
DESC
SP
[email protected]
305693
11414N FA571R CLAW HAMMER 22 OZ
[email protected]
UOM
EA
A
EA
A
PRICE
19.32
CV.ERX
23.13
CH.VAX
PLUMB FIBERGLASS HANDLE RIP CLAW
HAMMERS
High-luster, full polished finish. Octagon shaped neck. Virtually unbreakable
fiberglass handle. Contoured handle for increased comfort and reduced
fatigue. Enlarged handle base for butting material. New grip material reduces
handle slickness. Factory balanced for maximum striking power. Permabond
construction between head and handle.
ITEM #
288403
DESC
SP UOM PRICE
21.86
A
CR.RYX
11420N NAIL HAMMER RIP 20 OZ FIBERGLASS [email protected] EA
ESTWING STEEL HANDLE RIP CLAW
FRAMING HAMMERS
DESC
SP UOM PRICE
[email protected] EA
43.16
A
OZ.AZX
E3-22SMR RIP CLAW HAMMER MF STEEL
HANDLE 22IN
ESTWING STEEL HANDLE RIP CLAW
HAMMERS
Full polished, straight claw, nylon-vinyl grip. Steel handle.
ITEM #
334553
E3-16S RIPPING HAMMER 16OZ
DESC
SP
[email protected]
334561
E3-20S RIPPING HAMMER 20OZ
[email protected]
UOM
EA
A
EA
A
PRICE
29.49
LZ.AVX
33.77
LR.CEX
GREAT NECK FIBERGLASS HANDLE
STRAIGHT HAMMER
Fiberglass provides extra strength. Drop forged construction.
ITEM #
578800
HG16S STRAIGHT HAMMER 16OZ
DESC
256013
HG20S RIP HAMMER 20OZ FIBERGLASS
165468
HG24S HAMMER W/FGL HDL 24OZ
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
13.95
A.XVX
15.91
Y.LRX
18.12
CX.RVX
All steel construction. Exclusive nylon-vinyl deep
cushion grip. Length: 16" approx.
ITEM #
348392
E3-22S FRAME HAMMER SF 22OZ
DESC
SP
[email protected]
348406
E3-28S FRAME HAMMER SF 28OZ
[email protected]
334588
E3-22SM FRAME HAMMER MF 22OZ
[email protected]
334596
E3-28SM FRAME HAMMER MF 28OZ
[email protected]
www.wallacehardware.com
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
39.36
OX.VAX
42.42
OL.AEX
41.13
OC.AEX
44.17
OV.LCX
GREAT NECK 16 OZ. RIPPING HAMMER
Our highest quality. Contractor Series. Patented laser
notched anti-slip hickory handle. Drop forged fully
polished head.
ITEM #
107824
DESC
SP16R RIP HAMMER 16OZ W/WOOD
HANDLE
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
17.38
A
CX.OCX
5
Hand & Power Tools
Hammers and Mallets, Hammers, Rip Claw
Hammers
HOWARD BERGER 16 OZ. RIP HAMMER
WITH FIBERGLASS HANDLE
GREAT NECK MAGNETIC TACK HAMMER
5 oz. Drop forged construction. Magnetized, polished
head. Wood handle.
Drop-forged. Steel head. Rip head. Fiberglass handle.
ITEM #
236349
DESC
96617 RIP HAMMER FBRGLS HANDLE 16OZ
Hammers and Mallets, Hammers, Tack
Hammers
SP UOM
[email protected] EA
A
PRICE
9.79
E.HEX
ITEM #
175528
DESC
SP
[email protected]
MTH5 TACK HAMMER
UOM
EA
A
PRICE
7.47
V.OYX
Hammers and Mallets, Hammers, Ball Peen
Hammers
VAUGHAN 10 OZ LITTLE PRO-INCH
PROFESSIONAL RIP HAMMER
STANLEY GRAPHITE HANDLE BALL
PEEN HAMMERS
Fully polished head, smooth face. Handle is white
straight grain hickory for strength. Triple zone heat treating gives precise
temper to striking face for accurate power blows. Extra large, crowned striking
face for accurate power blows. Computer designed for superior balance to
reduce fatigue.
Heat-treated high-carbon steel head for superior strength and durability. Rim
Tempered process around the striking face minimizes chipping from off-center
strikes. Patented head-to-handle assembly for a permanent fit. Molded jacket
over graphite handle means maximum overstrike protection. Limited lifetime
warranty.
ITEM #
522732
ITEM #
486515
DESC
#9 RIPPING HAMMER-10 OZ
SP
[email protected]
UOM
EA
A
PRICE
18.63
CV.XZZ
Genuine hickory handle. Drop forged head.
Hollow-core fiberglass handle. Contoured slip-resistant
grip. Straight claw ripping hammer. Generic Dimensions: -14" length.
Dimensions: Overall Length End to End: 14". Overall Width Side to Side: 1.25".
Overall Depth Front to Back: 5.75". Overall Product Weight: 1.8 Pounds.
145300
SP UOM PRICE
[email protected] EA
25.23
A
CY.LRX
GREAT NECK WOOD HANDLE BALL
PEEN HAMMER
VAUGHAN 20-OZ STRAIGHT CLAW
HAMMER
ITEM #
522740
DESC
54-716 BALL PEEN HAMMER 16OZ JACKETED
GRAPHITE
DESC
FS999 RIPPING HAMMER-20 OZ FIBERGLASS
FS999ML RIPPING HAMMER ML - 20 OZ
FIBERGLASS
SP UOM PRICE
[email protected] EA
27.74
A
LX.AEX
[email protected] EA
32.74
A
LV.RLX
Hammers and Mallets, Hammers, Tack
Hammers
STANLEY WOOD HANDLE MAGNETIC
TACK HAMMERS
ITEM #
359009
BP12 BALL PEEN HAMMER 12OZ
DESC
SP
[email protected]
359017
BP16 BALL PEEN HAMMER 16OZ
[email protected]
359025
BP24 BALL PEEN HAMMER 24OZ
[email protected]
359033
BP32 BALL PEEN HAMMER 32OZ
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
VAUGHAN 16 OZ BALLPEIN HAMMER WOOD
HANDLE
Forged head, black finish. Polished face, clear
lacquered hickory handle. Magnetic tip. 3-3/4" head. 10-1/2" overall length.
Handle is fitted to head by a steel wedge inserted under 3,
000 lbs of hydraulic pressure. Handle is wedged into the eye
with wood and steel wedges. High carbon steel head.
Dimensions: Overall Product Weight: 1.36 Pounds. Made in
USA.
ITEM #
301175
ITEM #
522775
6
DESC
54-304 MAGNETIC TACK HAMMER W/HICK
HDL 5OZ
SP UOM PRICE
[email protected] EA
11.83
A
Y.XLX
PRICE
9.77
E.HVX
12.58
H.OLX
13.64
A.XCX
17.01
CX.XZZ
DESC
TC016 BALL PEIN HAMMER-12 OZ
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
14.35
CX.HYX
www.wallacehardware.com
Hand & Power Tools
Hammers and Mallets, Hammers, Ball Peen
Hammers
VAUGHAN 24-OUNCE COMMERCIAL
BALL PEIN HAMMER
FISKARS 14" HATCHET
Polished face, bevel, and pein. Head finished in rust
resistant black paint. Compression wedge hickory handle. Concentrically
ground, polished striking head and pein. Made in the USA.
ITEM #
145394
DESC
TC224 BALL PEEN HAMMER 24 OZ
Hammers and Mallets, Hammers, Rigster
Hatchets and Hammers
SP
[email protected]
UOM
EA
A
PRICE
17.48
CO.CVX
Ideal for chopping kindling and small- to medium-sized
logs. Chops deeper with each swing to get more done faster. Perfected
balance and power-to-weight ratio increases swing speed to multiply power,
much like an aluminum baseball bat.Shock-absorbing FiberComp? handle is
lightweight yet stronger than steel to prevent overstrike damage. Textured
non-slip grip reduces hand strain and improves control.
ITEM #
501446
DESC
378501-1002 X7 SOFTGRIP HATCHET 14"
Hammers and Mallets, Hammers, Rigster
Hatchets and Hammers
SP UOM
[email protected] EA
A
PRICE
34.99
LH.EAX
APEX TOOLS PLUMB RIGSTER HATCHET
Fully polished head. Checkered face. Sharp cutting
edge. Hickory handle. Permabond construction between head and handle. 28
oz. head and 18 inch in length.
ITEM #
396540
DESC
SP UOM PRICE
[email protected] EA
28.66
A
LC.AZX
11559P PLUMB RIGSTER HATCHET
CHECKERED FACE
Hammers and Mallets, Hammers, Drywall
Hammers
GOLDBLATT WOOD HANDLE DRYWALL
HAMMERS
Checkered head. Properly rounded and checkered 13
ounce head. Hickory handle. Wedge shaped blade.
Made of steel.
ITEM #
547581
VAUGHAN 28-OZ RIG BUILDERS
HATCHET
DESC
G05164 CHECKERHEAD HAMMER 12OZ
SP UOM
[email protected] EA
A
PRICE
31.82
LC.LCX
Wood handle. Drop forged high carbon steel. Large,
milled, crowned face. 3-1/2" blade. 28 oz. head, 17" hickory handle.
ITEM #
522813
DESC
RB-RIG BUILDERS HATCHET-28 OZ
SP
[email protected]
UOM
EA
A
PRICE
37.20
LH.YHX
Hammers and Mallets, Hammers, Shingler
Hammers
VAUGHAN 22-OZ CARPENTERS HALF
HATCHET
ESTWING STEEL HANDLE SHINGLER'S
HAMMERS
Half hatchet. Hickory handle. Full polished head. 3.5"
Cut. Handle Material: Wooden. Hammer Type: Hatchet. Generic Dimensions:
1.5" H x 6.25" W x 13.88" D, 1.88 lbs.
For cutting and applying shingles. For use with both Metric and Standard
shingles. Full polished, nylon-vinyl grip. Milled head. Replaceable blade and
gauge. 1-13/16" cutting edge. 12-1/2" overall length.
ITEM #
522848
ITEM #
334685
DESC
SH2 CARPENTERS HALF HATCHET-22 OZ
www.wallacehardware.com
SP UOM
[email protected] EA
A
PRICE
25.14
CA.YXZ
DESC
E3-CA SHINGLERS HAMMER
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
42.33
OL.HAX
7
Hand & Power Tools
Hammers and Mallets, Hammers, Brick
Hammers
Hammers and Mallets, Hammers, Brick
Hammers
PLUMB FIBERGLASS HANDLE BRICK
HAMMERS
VAUGHAN 24-OUNCE BRICKLAYERS
HAMMER
Forged head. Polished face, chamfer, bit and back.
Fiberglass handle with comfortable cushion grip. Permabond. 1-1/16" Wide Bit.
12-1/4" Length.
Bricklayer's Hammer has highly polished striking head,
sides and blade. Square, flat face with beveled edges.
Available with select, 11-1/2" flame-treated hickory
handle, double wedged and epoxy sealed. Steel Eagle solid steel handle with
patented Shock-Blok plug in head, or fiberglass handle with shock absorbing,
hollow core and cushion grip.
ITEM #
354716
094080
DESC
11422 FAB15 BRICK HAMMER
15 OZ
11421 BRICK HAMMER 24OZ
FIBERGLASS
INFO
1-1/16" WIDE
BIT\LINE121/4"" LENGTH"
1-1/8" WIDE
BIT\LINE13""
LENGTH"
SP UOM PRICE
[email protected] EA
26.44
A
LX.CLX
[email protected] EA
A
26.40
CY.YCX
ITEM #
145351
DESC
BL24 BRICK HAMMER 24 OZ
SP
[email protected]
UOM
EA
A
PRICE
29.24
LC.YAX
PLUMB BRICK/PROSPECT FIBERGLASS
HANDLE HAMMERS
GREAT NECK BRICK HAMMER
Fiberglass handled prospecting pick. Forged head. Polished face, chamfer
and back. Fiberglass handle with cushion grip. Permabond handle attachment.
Known as the Rock Hound hammer. Overall length is 12-1/2 inches.
Ideal for cutting and setting brick, stone, and masonry. Made of high grade
hardened and tempered steel for strength and durability with a chisel edge
rust resistant finish. An ergonomic rubber grit handle prevents slippage. 20 oz.
ITEM #
544280
ITEM #
165472
DESC
SP
[email protected]
11423 PROSPECT HAMMER 16 OZ
UOM
EA
A
PRICE
26.05
CY.HEX
Forged head. Durable black enamel finish. Sharp
cutting bit. Strong hickory handle with Permabond
process. 24 oz. head. 11" overall length.
DESC
11491P BRICK HAMMER 24 OZ
SP
[email protected]
UOM
EA
A
PRICE
22.62
CH.CZX
ITEM #
336408
E3-20BLC MASON HAMMER 20OZ
DESC
SP
[email protected]
348414
E3-24BLC MASON HAMMER 24OZ
[email protected]
UOM
EA
A
EA
A
PRICE
35.84
LH.HRX
37.87
LY.OZX
GOLDBLATT BRICK HAMMER
Made of high grade forged hammer steel. Use to set
and cut bricks, masonry, tile and concrete blocks.
Comfortable hardwood handle is carefully fitted.
8
DESC
UOM
EA
A
PRICE
17.62
CX.VRX
Straight head. Used in arc welding.
ITEM #
354643
DESC
SP UOM PRICE
5.76
A
V.LXZ
22023 CHIPPING HAMMER STRAIGHT HEAD [email protected] EA
Hammers and Mallets, Hammers, Dead
Blow Hammers
Fully polished. Nylon-vinyl grip.
G01153 BRICK HAMMER 16OZ
SP
[email protected]
HOT MAX CHIPPING HAMMER
ESTWING STEEL HANDLE MASON
HAMMERS
ITEM #
364975
DESC
BR20 BRICK HAMMER
Hammers and Mallets, Hammers, Chipping
Hammers
PLUMB WOOD HANDLE BRICK
HAMMERS
ITEM #
375845
*
NEW
SP
[email protected]
UOM
EA
A
PRICE
25.87
CH.LEX
ESTWING STEEL HANDLE DEAD BLOW
HAMMERS
One-piece hot cast polyurethane construction. Steel
cannister and rod are welded together for strength and
safety. Fully encased in polyurethane. Comfortable
vinyl grip. Power from within through movement of
hundreds of steel shot for maximum power and control. 2" or 51mm. 4-1/8" or
105mm head length. 12-3/4" overall length. Weight is 27 ozs.
ITEM #
562149
DESC
27E DEAD BLOW HAMMER
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
34.60
LR.AXZ
www.wallacehardware.com
Hand & Power Tools
Hammers and Mallets, Hammers, Drilling
Hammers
GRAINTEX DRILL HAMMER
VAUGHAN & BUSHNELL SOLID STEEL
HAND DRILLING HAMMER
Drop forged head. Epoxy bonded. Heat treated and
tempered. 10.5" handle.
DESC
ITEM #
320633
10-109 HAMMER DRILL 4LB 10INFB
SP
[email protected]
320641
10-111 HAMMER DRILL 4LB 10IN
[email protected]
UOM
EA
A
EA
A
PRICE
15.01
CX.LCX
10.34
CX.CYX
The right hammer for striking star drills, cold chisels,
brick chisels and punches. Broad, polished striking
faces with generous bevels.
ITEM #
565666
59210 HAMMER DRILL 4LB 10IN
Drilling hammers are used to strike cold chisels,
punches,star drills, brick chisels, and hardened nails. They are designed to
deliver heavy blows with limited swing in tight spaces. Chamfered edges with
10-1/2 inch hickory handle.
SP
[email protected]
565665
59211 HAMMER DRILL 4LB 10INFB
[email protected]
DESC
SP UOM PRICE
[email protected] EA
10.75
A
H.LOX
HD-2 DRILLING HAMMER 2LB W/10-1/2IN
HICKORY HDLE
AMES JACKSON HAND DRILL HAMMER
4 pound double face hammer head. Used with chisels,
punches, star drills and hardened nails. Permits heavy blows with limited
swing. 10.5 inch hickory handle for strength and durability.
DESC
1197100 DRILLING HAMMER HICKORY 10.5IN
HDL 4LB
SP UOM PRICE
[email protected] EA
15.93
A
CZ.ROX
STANLEY FATMAX ANTIVIBE
ENGINEERING HAMMER
Ideal for striking wood, metal or stone. Antivibe technology minimizes
vibration and shock at impact. Exclusive rim temper reduces incidences of
chipping at impact. Forged, one-piece steel construction for strength and
durability. Slip-resistant handle for a secure grip and comfort. Precision
balanced. Overall length: 15 inches.
DESC
SP UOM PRICE
56-004 ENGINEERING HAMMER ANTIVIBE 3LB [email protected] EA 35.07
A
LH.CRX
www.wallacehardware.com
PRICE
15.14
CZ.OAX
16.49
CL.VXZ
Cross peen (or blacksmith) hammers are used to strike,
shape, and bend unhardened metal. Also used to
shape block, brick, and stone. Chamfered edges. 16
inch hickory handle.
ITEM #
366633
DESC
HB-2 CROSS PEEN HAMMER 2LB W/16IN
HICKORY HDLE
HB-3 CROSS PEEN HAMMER 3LB W/16IN
HICKORY HDLE
SP UOM PRICE
[email protected] EA
11.05
A
H.VOX
[email protected] EA
13.06
A
A.AXZ
Hammers and Mallets, Hammers, Engineers
Hammer
PYTHON 3 LB. ENGINEER HAMMER
Drop forged and hardened carbon steel head for superior wear and long
service life. Double faced head with polished and chamfered edges to prevent
chipping. Genuine American hickory handle absorbs shock. Double wedge
assembly for permanent head-handle.
ITEM #
320668
ITEM #
446750
UOM
EA
A
EA
A
SEYMOUR WOOD HANDLE CROSS PEEN
HAMMER
573043
ITEM #
126969
DESC
Hammers and Mallets, Hammers, Cross
Peen Hammers
SEYMOUR WOOD HANDLE DRILLING
HAMMERS
ITEM #
366668
Hammers and Mallets, Hammers, Drilling
Hammers
DESC
10-126 HAMMER ENGINEERS W/WOOD
HANDLE 3LB
SP UOM PRICE
[email protected] EA
26.93
A
CX.LOX
SEYMOUR MIDWEST ENGINEERS
HAMMER
Engineers hammers (short handle sledges) are used to
strike stone, concrete, metal, and wood. Often used to drive stakes and rods
or move timbers. Chamfered edges. 16 inch hickory handle.
ITEM #
366579
DESC
HE-2 ENGINEER HAMMER 2LB W/16IN
HICKORY HANDLE
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
11.05
A
H.ORX
9
Hand & Power Tools
Hammers and Mallets, Hammers, Sledge
Hammer
Hammers and Mallets, Hammers, Sledge
Hammer
AMES JACKSON FIBERGLASS ENGINEER
HAMMER
GRAINTEX FIBERGLASS SLEDGE
HAMMER
Features a 16-inch blue fiberglass handle and a 4-pound double face forged
steel hammer head, perfect for heavy hammering or demolition work. Makes
driving spikes or wedges easier. Great choice for personal or professional use.
Drop forged head. Heat treated and tempered. Epoxy bonded. Fiberglass
handle with rubber grip.
ITEM #
320285
10-120 HAMMER SLGE 2LB 16INFG
320293
10-125 HAMMER SLGE 3LB 16INFG
320307
10-128 HAMMER SLDGE 4LB 16INFG
320315
11-101 HAMMER SLDGE 6LB 36INFG
320323
11-104 HAMMER SLDGE 8LB 36INFG
320331
11-108 HAMMER SLDGE 10LB 36IN
AMES JACKSON SLEDGE HAMMER
320366
11-113 HAMMER SLGE 12LB 36INFG
3 lb. engineer hammer with 16 in. hickory handle. Steel head. Perfect for
heavy hammering or demolition work.
320374
11-116 HAMMER SLGE 16LB 36INFG
320382
11-118 SLEDGE HAMMER 20LB 36IN
FIBERGLASS HDL
ITEM #
284912
ITEM #
366587
DESC
SP UOM PRICE
1197000 SLEDGE HAMMER DF FBGL 16IN HDL [email protected] EA 19.17
4LB
A
CV.OEX
DESC
1196300 SLEDGE HAMMER 16IN HARDWPPD
HDL 3LB
SP UOM PRICE
[email protected] EA
14.98
A
CX.ARX
DESC
SP UOM PRICE
[email protected] EA
12.75
A
A.ELX
[email protected] EA
14.16
A
Y.VZX
[email protected] EA
15.88
A
CX.RLX
[email protected] EA
26.95
A
CH.YHX
[email protected] EA
32.43
A
LC.RLX
[email protected] EA
37.60
A
LE.CEX
[email protected] EA
40.93
A
LH.OHX
[email protected] EA
35.22
A
OV.HOX
[email protected] EA
39.63
A
OY.XAX
GRAINTEX WOOD HANDLE SLEDGE
HAMMER
Drop forged head. Heat treated and tempered. Epoxy bonded. Hickory handle.
SEYMOUR STRUCTRON FIBERGLASS
HANDLE SLEDGE HAMMERS
ITEM #
320390
10-122 HAMMER SLGE 2LB 16INWD
SP
[email protected]
Drop forged, heat treated steel head with milled face. Chamfered edges. 36
inch double-injected fiberglass handle.
320439
10-130 HAMMER SLGE 4LB 16INWD
[email protected]
320447
11-102 HAMMER SLGE 6LB 36INHIC
[email protected]
320455
11-106 HAMMER SLGE 8LB 36INHIC
[email protected]
320498
11-110 HAMMER SLGE 10LB 36INWD
[email protected]
320609
11-114 HAMMER SLGE 12LB 36INWD
[email protected]
320617
11-117 HAMMER SLGE 16LB 36INWD
[email protected]
320625
11-120 HAMMER SLGE 20LB 36INWD
[email protected]
ITEM #
572551
DESC
SH-6FG SLEDGE HAMMER 6LB W/36IN
FIBERGLASS HANDLE
SP UOM PRICE
[email protected] EA
34.17
A
LO.XCX
DESC
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
20.51
Y.CVX
14.99
Y.YZX
28.49
CY.XEX
36.53
LV.VOX
40.41
LE.VXZ
28.04
LH.RVX
44.68
OV.HOX
39.63
OY.XAX
AMES JACKSON SLEDGE HAMMER
Double faced sledge hammer features a 36-inch fiberglass handle. The
hammer is used for general sledging operations in striking wood, concrete,
metal and stone. Traditional hickory will not splinter and will last for years to
come.
ITEM #
572578
572586
10
DESC
SP UOM PRICE
31.42
LO.RYX
35.87
LR.RLX
1198800 SLEDGE HAMMER DBL FACE 36IN
[email protected] EA
HDL 8LB
A
1199300 SLEDGE HAMMER DF FBGL 36IN HDL [email protected] EA
10LB
A
SEYMOUR SMART BUY DOUBLE FACE
SLEDGE HAMMER
Promotional quality. Chamfered edges. 36 inch hickory handle.
ITEM #
210064
DESC
SH-8P SLEDGE HAMMER DB FACE 8LB
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
25.95
CH.VHX
www.wallacehardware.com
Hand & Power Tools
Hammers and Mallets, Hammers, Sledge
Hammer
AMES TRUE TEMPER SLEDGE HAMMER
This double faced sledge hammer is proudly Made in the USA. It features a 36
inch hickory handle for maximum strength and shock resistance. The head is
forged from high-carbon steel and tempered for long life. The striking face is
heat-treated for the hardness to withstand many years of heavy blows.
ITEM #
301523
301531
301558
360953
366617
366625
DESC
1113091100 SLEDGE HAMMER SLIP EYE 6LB
TRUE AMER
1113091300 SLEDGE HAMMER SLIP EYE 8LB
TRUE AMER
1113091500 SLEDGE HAMMER SLIP EYE 10LB
TRUE AMER
1113091700 SLEDGE HAMMER SLIP EYE 12LB
TRUE AMER
1199700 SLEDGE HAMMER DF HICKORY 36IN
HDL 16LB
1199900 SLEDGE HAMMER HICKORY 36IN
HDL 20LB
SP UOM PRICE
[email protected] EA
26.61
A
LX.LCX
[email protected] EA
29.56
A
LZ.LZX
[email protected] EA
34.45
A
LR.XRX
[email protected] EA
39.86
A
LY.OHX
[email protected] EA
47.33
A
OV.ROX
[email protected] EA
56.85
A
VC.RXZ
Hammers and Mallets, Hammers, Sledge
Hammer
AMES RAZOR BACK FIBERGLASS
HANDLE ENGINEER HAMMER
Forged steel hammer head. Features a 15" solid core fiberglass handle.
Patented head to handle connection has a reinforced steel pin for improved
safety. Great for concrete, tile & drywall demolition.
ITEM #
415252
415253
415254
415255
415256
415257
DESC
3111000 SLEDGEHAMMER DBL FACE #4 15"
FBRGLS HDLE
3112000 SLEDGEHAMMER DBL FACE#6 34"
FBRGLS HDLE
3113000 SLEDGEHAMMER DBLE FACE#8
34"FBRGLS HD
3115000 SLEDGEHAMMER DBLE FACE#10
34"FBRGLS H
3116000 SLEDGEHAMMER DBLE FACE#12
34"FBRGLS H
3117000 SLEDGEHAMMER DBLE FACE#16
34"FBRGLS H
SP UOM PRICE
[email protected] EA
31.10
A
LO.HEX
[email protected] EA
43.55
A
OZ.LRX
[email protected] EA
47.29
A
OR.CZX
[email protected] EA
56.00
A
VL.HZX
[email protected] EA
62.22
A
VE.AEX
[email protected] EA
68.45
A
EX.VOX
Hammers and Mallets, Mallets, Rubber Head
Mallets
STANLEY WOOD HANDLE RUBBER
MALLETS
JMK/IIT 3 LB. SLEDGE HAMMER
Tough rubber head molded to a lacquered handle.
Drop forged, high impact ABS handle. Soft cushion TPR
rubber grip for a firm, comfortable hold. 3 lb. head. 1/2" length.
ITEM #
127728
467820
DESC
32912 HAMMER SLDGE ABS BLK 3LB
1196900 SLDGE HAMMR 4# DR 16" HICKORY
HNDL JKSN
SP UOM PRICE
[email protected] EA
17.13
A
CX.CAX
[email protected] EA
15.47
A
CZ.HEX
DESC
SP
[email protected]
565661
59235 HAMMER SLDGE 4LB 16INFG
[email protected]
565664
59246 HAMMER SLDGE 8LB 36INHIC
[email protected]
565662
59247 HAMMER SLDGE 8LB 36INFG
[email protected]
www.wallacehardware.com
UOM
EA
A
EA
A
EA
A
EA
A
SP UOM PRICE
13.63
A
CX.OHX
Professional quality. Wood handle.
Polished faces with generous bevels. Rust resistant powder coat
finish on both sides.
59234 HAMMER SLDGE 4LB 16INWD
DESC
57-522 RUBBER MALLET 18OZ W/WOOD HDL [email protected] EA
GREAT NECK WOOD HANDLE RUBBER
MALLET
VAUGHAN & BUSHNELL SUPERSTEEL DOUBLE
FACED SLEDGE HAMMER
ITEM #
565663
ITEM #
390259
PRICE
15.18
CZ.VCX
17.51
CO.CHX
30.00
LZ.ERX
36.74
LH.RLX
ITEM #
256056
RM8 RUBBER MALLET 8OZ
DESC
SP
[email protected]
175536
RM16 RUBBER MALLET 16OZ
[email protected]
256048
RM32 RUBBER MALLET 32OZ
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
EA
A
PRICE
2.52
C.VRX
4.03
L.OHX
5.94
O.EXZ
11
Hand & Power Tools
Hammers and Mallets, Mallets, Plastic Tip
Mallets
Mauls, Axes and Wedges, Mauls, Splitting
Mauls
STANLEY WOOD HANDLE PLASTIC TIP
HAMMERS
AMES TRUE TEMPER LICKETY SPLITTER
MAUL
Replaceable tips are made of tough plastic that won't mar finely finished
surfaces. Handles are made of hickory and securely locked in oval eye body.
Lacquered handle. Plastic tips are replaceable. 12" handle.
The Lickety Splitter wood splitter cuts wood fast and easily with its heftyhitting 12-pound head. This tool has a durable design, featuring a 34-inch steel
handle with a molded polypropylene cover for ultimate strength. It also has
rubber hand grip for comfortable hand placement. Eye size is 1 inch x 1.375
inches.
ITEM #
486566
DESC
SP UOM PRICE
[email protected] EA
21.89
A
CR.HLX
57-594 SOFT FACE HAMMER 80Z W/12IN
HANDLE
Mauls, Axes and Wedges, Mauls, Splitting
Mauls
ITEM #
439355
DESC
1113090800 MAUL LICKETY SPLITTER 12LB
TRUE AMER
SP UOM PRICE
[email protected] EA
47.46
A
OR.LOX
AMES TRUE TEMPER LARGE EYE MAUL
SEYMOUR SMART BUY SPLITTING
MAULS
8-pound maul with 36 inch hardwood handle and handle guard for overstrike
protection. Used for splitting wood in conjunction with woodsplitting wedges
by first making a notch with the splitting edge and then driving the wedge into
the wood with the maul's striking face.
Promotional quality, sledge eye head. 36 inch hickory handle.
ITEM #
210137
DESC
SM-6P MAUL SPLITTING STEEL 6LB
SP
[email protected]
UOM
EA
A
PRICE
25.95
CH.VHX
ITEM #
439304
DESC
SP UOM PRICE
32.90
A
LV.ALX
1113090600 SPLIT MAUL 8LB TRUE AMERICAN [email protected] EA
AMES TRUE TEMPER LARGE EYE MAUL
6 lb. 36 inch hickory handle with handle guard.
ITEM #
439398
AMES TRUE AMERICAN 6 LB TRUE
AMERICAN? WOODSPLITTER MAUL
Large-eye. Used to split wood logs. Durable design provides extra strength
and durability. Drop-forged steel head. Red fiberglass handle.
ITEM #
828562
DESC
1113216000 WOOD SPLITTER MAUL 6LB RED
FGL HNDL
SP UOM PRICE
[email protected] EA
35.78
A
LR.AXZ
The True American axe eye wood splitter maul is proudly made in the USA.
The hickory handle absorbs shock before it reaches the user. Utilize tool for
splitting wood in conjunction with woodsplitting wedges by first making a
notch with splitting edges and then driving the wedge with the maul's striking
head. The maul has a 36-inch hickory handle length and 6-pound head weight
to withstand frequent use by a user.
439428
Wood splittling maul. Drop forged, heat treated steel. Epoxy bonded.
ITEM #
320951
13-100 MAUL SPLIT 6LB 36INFGHD
SP
[email protected]
320994
13-104 MAUL SPLIT 8LB 36INFGHD
[email protected]
321001
13-102 MAUL SPLIT 6LB 36INHIC
[email protected]
321028
13-106 MAUL SPLIT 8LB 36INHIC
[email protected]
12
DESC
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
25.90
CH.LHX
28.28
CA.AEX
24.60
CR.ERX
27.05
CA.XYX
SP UOM PRICE
29.80
LZ.EVX
AMES TRUE TEMPER AXE EYE MAUL
ITEM #
439401
GRAINTEX WOOD SPLITTING MAUL
DESC
1113100200 WOOD SPLIT MAUL 6LB HICK HDL [email protected] EA
TA
A
DESC
1113115100 TA WOOD SPLIT MAUL 6LB 36IN
HICK HDL
1113115200 TA WOOD SPLIT MAUL 8LB 36IN
HICK HDL
SP UOM PRICE
[email protected] EA
29.59
A
LZ.OLX
[email protected] EA
37.43
A
LA.LOX
VAUGHAN & BUSHNELL SPLIT MAUL
ITEM #
565674
59268 MAUL SPLIT 6LB 36INHIC
DESC
SP
[email protected]
565673
59269 MAUL SPLIT 6LB 36INFGHD
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
PRICE
29.10
LC.AZX
31.27
LO.ECX
www.wallacehardware.com
Hand & Power Tools
Mauls, Axes and Wedges, Mauls, Splitting
Mauls
Mauls, Axes and Wedges, Axes, Camp Axe
SEYMOUR BOYS CAMP AXE
AMES RAZORBACK FIBERGLASS SUPER
SPLITTER
Boys (house) single bit axes are lighter duty axes used
to cut saplings, split kindling, trim branches, and prune trees. Single bit 1.25 lb.
head. 14 inch hickory handle.
Provides more splitting force with less weight, reducing fatigue. The #4 forged
steel head is attached to a 33 inch fiberglass handle that ensures maximum
control, strength, and durability. The balanced head provides for an easy and
effective swing.
ITEM #
221627
ITEM #
415260
DESC
4114000 SUPER SPLITTER #4 33" FBRGLS
HDLE
DESC
SP UOM PRICE
[email protected] EA
22.39
A
CE.LOX
AX-B1 AXE SB BOYS CAMP 14IN WD HDLE
1.25LB
SP UOM PRICE
[email protected] EA
43.55
A
OZ.LRX
GRAINTEX BOYS CAMP AXE
Drop forged head. Epoxy bonded. Heat treated and tempered. Hickory handle.
AMES RAZORBACK FIBERGLASS
HANDLE WOOD SPLITTING MAUL
ITEM #
320714
Constructed with a 34-inch fiberglass handle and forged steel head. It has an
exclusive sleek design with additional functionality, safety and control. The
handle features a two piece overstrike slip eye connection, TPE over mold for
better control, and non-slip rounded and flared end for more precision and
safety. This is a great tool for professional and personal use. Utilize tool for
splitting wood in conjunction with wood splitting wedges by first making a
notch with splitting edges and then driving the wedge with the maul's striking
head.
ITEM #
415258
DESC
SP UOM PRICE
[email protected] EA
43.55
A
OZ.LRX
3118000 SPLITTING MAUL, #8 34"
FIBERGLASS HANDLE
DESC
12-105 AXE BOYS 2.5LB 28INHIC
SP
[email protected]
UOM
EA
A
GRAINTEX CAMP AXE
Fully polished head. Epoxy bonded. Heat treated and
tempered. 14" handle.
ITEM #
320676
12-100 AXE CAMP 1.25LB 15INFG
DESC
SP
[email protected]
320684
12-103 AXE CAMP 1.25LB 15INWD
[email protected]
Mauls, Axes and Wedges, Axes, Camp Axe
JMK/IIT FIBERGLASS CAMP AXE
DESC
18005 AXE CAMP FBGL 2LB
SP
[email protected]
UOM
EA
A
EA
A
PRICE
13.55
Y.XOX
12.85
A.EHX
AMES TRUE TEMPER CAMP AXE
2lb. Drop forged. High impact cushioned rubber grip.
Fully polished. Plastic coated fiberglass handle.
ITEM #
334766
PRICE
21.20
CV.XVX
UOM
EA
A
PRICE
18.49
CX.AZX
Forged heat-treated head for the ultimate in durability
and safety. Ideal for digging up roots and breaking up hard soil and clay. 1.25
pound camp axe with fiberglass handle. Versatile tool useful for camping,
gardening and hunting.
ITEM #
126640
DESC
SP
UOM PRICE
17.04
A
CL.ACX
1216000 CAMP AXE 1.25 BLK FIBERGLASS [email protected] EA
AMES TRUE TEMPER WOOD BUDDY
MINER'S AXE
The 20-inch hickory handle and 3.5-pound axe head provide an effective
swing. Use for trimming branches, pruning trees, splitting and cutting wood.
Durable tool with a hickory handle that absorbs shock, has an integrallymolded handle guard, and overstrike protection.
ITEM #
273341
DESC
11-905 MINERS AXE 3-1/2LB
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
27.66
LC.CLX
AMES TRUE TEMPER CAMP AXE
1.25 pound forged steel head. 14 in. hickory handle. It
is used to chop small pieces of wood and clear branches from trees and
shrubs.
ITEM #
439312
DESC
1113115400 CAMP AXE 1.25LB TRUE
AMERICAN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
17.65
A
CO.OCX
13
Hand & Power Tools
Mauls, Axes and Wedges, Axes, Camp Axe
Mauls, Axes and Wedges, Axes, Boys Axe
LANSKY FIREFIGHTER'S BATTLE AXE
AMES TRUE TEMPER BOYS AXE
Designed to be the multi-purpose "sidearm" of choice
for professional and volunteer firefighters alike. It has
1075 Tool steel blade, load bearing to 600 lbs. Handle
is insulated up to 10,000 volts. Leather sheath. It also
acts as a pry bar, gas valve wrench, hose wrench and
impact tool.
2.25 lb. single bit Boys axe. 28 inch hickory handle.
ITEM #
384666
DESC
AX-911 BATTLE AXE FIRE FIGHTERS
SP
[email protected]
ITEM #
439371
UOM
EA
A
PRICE
74.26
VY.ECX
DESC
1113100100 BOYS AXE SC 2.25LB 28IN HICK
HDL TA
SP UOM PRICE
[email protected] EA
27.05
A
LX.OYX
Mauls, Axes and Wedges, Axes, Single Bit
Axe
SEYMOUR SMART BUY MICHIGAN
SINGLE BIT AXE
VAUGHAN & BUSHNELL CAMP AXE
Single bit. 3.5 lb. head. Promotional quality. 36 inch hickory handle.
ITEM #
565667
DESC
59301 AXE CAMP 1.25LB 15INFG
SP
[email protected]
565668
59302 AXE CAMP 1.25LB 15INWD
[email protected]
UOM
EA
A
EA
A
PRICE
12.82
Y.RVX
12.61
Y.VAX
ESTWING 13-1/2" FORGED HUNTERS
AXE
DESC
EBHA HUNTERS AXE
SP
[email protected]
DESC
SP UOM PRICE
[email protected] EA
25.95
A
CH.OXZ
AX-3P AXE MICHIGAN SB 3.5LB W/36IN
WOOD HDLE
SEYMOUR MICHIGAN SINGLE BIT AXE
Single bit. 3.5 lb. head. Promotional quality. 36 inch hickory handle.
Hand sharpened edge; Cut and maintain tree stand
area; Gut hook designed to field dress large game.
ITEM #
357377
ITEM #
210072
ITEM #
221430
UOM
EA
A
PRICE
73.53
EV.LVX
DESC
SP UOM PRICE
34.47
LO.LCX
AX-3 AXE MICHIGAN SB 3.5LB W/36IN WOOD [email protected] EA
HDLE
A
ESTWING 14" CAMPERS AXE
SEYMOUR PULASKI AXE
Fully-forged in one piece with the handy tent stake
puller notch and Estwing?s patented Shock Reduction
grip. Each axe comes with a durable nylon sheath.
Forged in the USA.
Pulaski axes combine a single bit axe blade with a mattock
blade. This blade combination makes it ideal for firefighting
and for a variety of landscaping applications. Single bit. 3.5
lb. head. 36 inch hickory handle.
ITEM #
357376
DESC
EO-25A 14IN ORANGE CAMPERS AXE
SP
[email protected]
UOM
EA
A
PRICE
41.79
OX.AOX
AMES RAZORBACK FIBERGLASS
HANDLE COMPACT AXE
14
DESC
4222000 COMPACT AXE, #1.25,
14"FIBERGLASS HAN
DESC
AX-P3 SINGLE BIT AXE PULASKI 3-1/2LB 36IN
HIC
SP UOM PRICE
[email protected] EA
35.67
A
LV.VYX
GRAINTEX SINGLE BIT AXE
A versatile wood cutting and shaping tool. It features a #1.25 forged steel
carbon head with a 14-inch fiberglass handle for ultimate strength and
durability. This high performance axe is well balanced for efficient impact.
ITEM #
415266
ITEM #
371904
SP UOM PRICE
[email protected] EA
24.88
A
CY.XZZ
Single bit axe. Heat treated and tempered. 36" handle.
ITEM #
320854
12-108 AXE SB 3.5LB 36INFG HDL
DESC
SP
[email protected]
320919
12-110 AXE SB 3.5LB 36INHIC HD
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
PRICE
25.53
CH.XLX
26.08
CH.VZX
www.wallacehardware.com
Hand & Power Tools
Mauls, Axes and Wedges, Axes, Single Bit
Axe
Mauls, Axes and Wedges, Axes, Double Bit
Axe
AMES TRUE TEMPER SINGLE BIT
MICHIGAN AXE
GRAINTEX DOUBLE BIT AXE
3.5-pound single bit axe features a 36 inch hickory handle.
ITEM #
320935
ITEM #
439339
Double bit axe. Heat treated and tempered. 36" handle.
DESC
SP UOM PRICE
[email protected] EA
30.75
A
LO.CYX
1113090100 SGL BIT AXE 3.5LB HICK HDL
TRUE AMER
DESC
12-115 AXE DB 3.5LB 36INFG HDL
SP
[email protected]
AMES TRUE AMERICAN SINGLE BIT
MICHIGAN AXE
SEYMOUR MICHIGAN DOUBLE BIT AXE
3.5 Lb. Splitting Axe. Used to chop wood and clear branches from trees and
scrubs. Fiberglass handle. Forged steel axe head. Splitting Axe. Handle: Fiberglass. Dimensions: Handle length: 34 inches. Overall Length: Top to
Bottom: 34 inches. Overall Width - Side to Side: 8 inches. Overall Depth - Front
to Back: 1.5 inches. Overall Product Weight: 5.7 lbs.
ITEM #
221589
ITEM #
828561
DESC
1113214000 AXE MICH SB 3.5LB FGLS HNDL
34IN RED
SP UOM PRICE
[email protected] EA
32.39
A
LV.VYX
AMES RAZORBACK SINGLE BIT
MICHIGAN AXE
DESC
DESC
SP UOM PRICE
378541-1002 X25 SPLITTN SOFTGRIP AXE
[email protected] EA
59.99
28"
A
VH.VXZ
378841-1002 X27 SUPER S LITTING SOFTGRIP [email protected] EA 69.99
AXE 36"
A
EO.HLX
ITEM #
565670
59309 AXE SB 3.5LB 36INFG HDL
SP
[email protected]
565671
59319 AXE SB 3.5LB 36INHIC HD
[email protected]
www.wallacehardware.com
SP UOM
[email protected] EA
A
PRICE
32.37
LC.AXZ
AMES TRUE TEMPER DAYTON DOUBLE
BIT AXE
ITEM #
439347
DESC
SP UOM PRICE
[email protected] EA
35.45
A
LR.HOX
1113090300 DBL BIT AXE 3.5LB HICK HDL
TRUE AMER
ITEM #
565672
59313 AXE DB 3.5LB 36INFG HDL
DESC
SP
[email protected]
565677
59317 AXE DB 3.5LB 36INHIC HDL
[email protected]
UOM
EA
A
EA
A
PRICE
32.64
LV.EVX
34.02
LE.EAX
Mauls, Axes and Wedges, Wedges, Splitting
Wedges
AMES TRUE TEMPER TORPEDO SPLITTING
WEDGE
VAUGHAN & BUSHNELL SINGLE BIT
SPLITTING AXE
DESC
DESC
AX-DB3 AXE DB 36IN WOOD HDLE 3.5LB
VAUGHAN & BUSHNELL DOUBLE BIT
SPLITTING AXE
Ideal for splitting medium- to large-sized logs. Designed for maximum
efficiency to give you more one-strike splits. Perfected balance and power-toweight ratio increases swing speed to multiply power, much like an aluminum
baseball bat. Shock-absorbing FiberComp? handle is lightweight yet stronger
than steel to prevent overstrike damage. Textured non-slip grip reduces hand
strain and improves control.
501448
Double bit. 3.5 lb. 36 inch hickory handle.
SP UOM PRICE
[email protected] EA
37.33
A
LA.ECX
4112000 AXE MICHIGAN SINGLEBIT#3.5
33"FBRGLS
FISKARS SPLITTING AXE
ITEM #
501447
PRICE
29.39
CY.REX
The 3.5 pound double bit axe with 36-inch hickory handle has an integrally
molded handle guard for overstrike safety.
Features a 33-inch fiberglass handle and a #3.5 forged steel head. This axe is
ideal for trimming branches, pruning trees, and splittling wood. The durable
fiberglass handle will last for years to come.
ITEM #
415259
UOM
EA
A
UOM
EA
A
EA
A
PRICE
29.01
LC.ACX
31.88
LO.YHX
Perfect for efficient wood splitting with each strike by projecting
force in four directions. 7 inch length and 4 pound head weight for
durability. Forged steel wedge for durability.
ITEM #
118966
DESC
24-142 SPLITTING WEDGE SCN 4LB
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
15.28
CZ.ERX
15
Hand & Power Tools
Mauls, Axes and Wedges, Wedges, Splitting
Wedges
AMES TRUE TEMPER WOOD SPLITTING
WEDGE
OREGON WEDGE - FOR FALLING
The wood splitting wedge is drop-forged steel that is used to split wood logs.
This tool features square heads for striking and driving into the log. The 3pound wedge is durable and painted black. 3-pound forged heat-treated steel
for the ultimate in durability and safety. Used for splitting wood logs. Use with
a sledge hammer or maul to drive into wood log. Durable design to withstand
industrial use.
ITEM #
273325
DESC
11319 SPLITTING WEDGE 3LB
Mauls, Axes and Wedges, Wedges, Splitting
Wedges
SP
[email protected]
UOM
EA
A
For falling - not for splitting. Plastic wedge helps to
control direction of tree fall. Prevents saw binding in
cut.
ITEM #
312274
DESC
23565 WEDGE FOR FALLING
SP
[email protected]
UOM
EA
A
PRICE
6.69
V.VZX
UOM
EA
A
PRICE
14.73
CZ.XAX
PRICE
10.41
H.YXZ
AMES TRUE TEMPER WOOD SPLITTING
WEDGE
Square head splitting wedge. 4lb. head. 1.625 inches wide.
ITEM #
439363
DESC
SP UOM PRICE
13.01
A
CX.LVX
VAUGHAN & BUSHNELL SPLITTING
WEDGE
1113091900 WOOD SPLITTING WEDGE 4LB TA [email protected] EA
ITEM #
565669
AMES TRUE TEMPER WOOD SPLITTING
WEDGE
DESC
SP
[email protected]
59278 WEDGE WOOD SPLIT 5LB
5-pound forged heat-treated steel for the ultimate in durability and safety.
Used for splitting wood logs. Use with a sledge hammer or maul to drive into
wood log. Durable design to withstand industrial use.
ITEM #
375799
DESC
1132600 WOOD SPLITTING WEDGE 5LB
SP
[email protected]
UOM
EA
A
PRICE
16.17
CL.OCX
GRAINTEX BLASTER WOOD SPLITTING
WEDGE
BARON MFG. HANDLE SOLID SOCKET
PEAVIE
Heat treated and tempered. Drop forged. Grade #45
steel construction. Ideal for splitting logs with efficiency
and precision. Strong and durable.
ITEM #
320846
DESC
13-114 WEDGE WOOD SPLIT 4LB
SP
[email protected]
UOM
EA
A
PRICE
28.69
Y.YLX
UOM
EA
A
EA
A
PRICE
11.42
H.RCX
13.58
Y.XAX
GRAINTEX SQUARE HEAD WOOD
SPLITTING WEDGE
Wood splitting wedge. Square head.
ITEM #
320730
13-116 WEDGE WOOD SPLIT 4LB
SP
[email protected]
320838
13-117 WEDGE WOOD SPLIT 5LB
[email protected]
16
DESC
Mauls, Axes and Wedges, Peavies and
Hooks, Peavies
Peavies solid socket, driven pick with professional hardwood handle. Duckbill
hooks are drop forged high carbon steel with the bill ground to a fine point.
Features a drawn carbon steel socket, and a pick forged from high carbon
steel before being driven into handle. Socket held securely in place with
special retaining tab forged into pick. Handle turned from select white
mountain hickory or rock maple, air dried to 18? moisture contact and
precision fitted. Heads are painted, handles are clear lacquer finished. Note:
not to be used as a wedge or prybar. Load must be applied in direction of
handle brand mark. Flexing handle in a perpendicular direction of grain may
cause handles fracture and result in personal injury.
ITEM #
445770
4080015 PEAVY 2-1/4X3FT
DESC
SP
[email protected]
445789
4080017 PEAVY 2-1/2 X4FT
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
PRICE
74.39
ER.EXZ
88.34
RH.XAX
www.wallacehardware.com
Hand & Power Tools
Mauls, Axes and Wedges, Peavies and
Hooks, Cant Hooks
Mauls, Axes and Wedges, Peavies and
Hooks, Log Lifter Hook
BARON MFG. HARDWOOD HANDLE
CANT HOOK
BARON MFG. 2-1/4' X 3-1/2' LOG LIFTER
Cant 7/16"x7/8" duckbill hooks are drop forged with the
bills ground to a fine point. Clasps and extension toe
rings are ductile iron castings for long lasting service.
Handles are White Mountain Hickory, air dried to 18
degree moisture content, then precisioned cut to an exact fit. Heads are
painted; handles are clear lacquered finished. For log sizes 6" to 16" long.
NOTE: Not to be used as a wedge or pry bar. Load must be applied in direction
of handle brand mark. Flexing handle in a perpendicular direction of grain may
cause handle fraction and result in personal injury.
ITEM #
445703
DESC
4080005 CANT HOOK 2-1/4X3FT
SP
[email protected]
445738
4080006 CANT HOOK 2-1/4X3-1/2FT
[email protected]
445746
4080007 CANT HOOK 2-1/4X4FT
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
73.02
EZ.VEX
76.25
EH.YXZ
82.76
RL.AEX
Log jacks dual purpose cant/jack professional quality 21/4"x3-1/2' hardwood handle. Easily converts into a Cant
hook by removing the lifting brace. Duckbill hook
7/16"x7/8"x8" drop forged steel. Handle made from top
quality Mountain Hickory, air dried to 18? moisture content.
Ideal for log sizes 3 to 12". Weight: 11 lbs.
ITEM #
445754
DESC
SP
[email protected]
4080022 LOG JACK 2-1/4X3-1/2FT
UOM
EA
A
PRICE
74.39
ER.EXZ
Wrecking, Claw, Pry and Digging Bars, Nail
Pullers and Claw Bars, Nail Pullers
JMK/IIT NAIL PULLER
12", single end nail puller. 5/8" stock size.
ITEM #
574325
Mauls, Axes and Wedges, Peavies and
Hooks, Skid Tong Hook
BARON MFG. OPEN SKID TONG WITH
GRAB HOOK
ITEM #
390879
390887
390895
DESC
4080048 SKIDDING TONG W/ 3/8IN SWVL
GRAB HOOK 16
4080049 SKIDDING TONG W/ 3/8IN SWVL
GRAB HOOK 20
4080051 SKIDDING TONG W/ 3/8IN SWVL
GRAB HOOK 32
SP UOM PRICE
[email protected] EA
64.53
A
VY.XCX
[email protected] EA
120.29
A
YC.OVX
[email protected] EA
148.26
A
CZL.EYX
SP
[email protected]
UOM
EA
A
PRICE
4.91
L.AYX
GREAT NECK TACK PULLER
Has a rustproof plated blade firmly imbedded in a
tough plastic handle and smoothly polished back and
face. The full 1/4-inch thick heavy duty shank lifts tacks,
small nails, and brads.
ITEM #
830437
Forged from round steel to position additional steel at critical stress areas.
Points are fine ground to assure long lasting sharpness. Tongs 3/4 in. and 1 in.
are supported by special tong shut; tongs 1-1/4" use screw pin anchor
shackles. Specially shaped to grab and hold poles and logs for skidding and
dragging operations, not for lifting. Painted blue. NOTE: Designed for pulling
or dragging. Skidding tongs are not load rated and should not be used for
overhead lifting. Do not heat points to sharpen them. Swivel grab.
DESC
50100 NAIL PULLER 12IN
DESC
TL4C TACK LIFTER
SP
[email protected]
UOM
CD
A
PRICE
3.72
L.LOX
STANLEY WORKS 11-INCH NAIL PULLER
Double-end puller features 90 degree and 30 degree
offset claws. Fully sharpened claw tips. Heat-treated for
durability. Limited Lifetime Warranty.
ITEM #
446548
DESC
55-035 NAIL PULLER 11IN N
SP
[email protected]
UOM
EA
A
PRICE
15.27
CZ.VAX
UOM
EA
A
PRICE
17.28
CL.YZX
VAUGHAN BEAR CLAW NAIL PULLER
Forged, tempered steel with flat claw for easy wedging
and minimal wood damage. Rocker head gives
excellent leverage. Rust resistant finish.
ITEM #
145386
www.wallacehardware.com
DESC
BC12 NAIL PULLER 11-3/4IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
17
Hand & Power Tools
Wrecking, Claw, Pry and Digging Bars, Nail
Pullers and Claw Bars, Claw Bars
Wrecking, Claw, Pry and Digging Bars, Nail
Pullers and Claw Bars, Claw Bars
STANLEY WORKS STEEL CLAW BAR
STANLEY PRECISION CLAW BAR
Ideal for precision nail pulling and prying. Polished,
beveled claws for precise penetration. Ergonomic grip
provides a better grip and protects from extreme temperatures. Forged, highcarbon spring steel for extreme strength and durability. Flat striking face
allows claw to be driven under deeply embedded nails. Tempered for safety
and heat treated for durability.
Ideal for precision nail pulling and prying. Polished,
beveled claws for precise penetration. Flat striking face
allows claw to be driven under deeply embedded nails. Forged, high-carbon
alloy steel for long life. Tempered to help reduce chipping.
ITEM #
474639
DESC
FMHT55008 FAT MAX 10IN CLAW BAR
SP
[email protected]
UOM
EA
A
ITEM #
446580
DESC
SP
[email protected]
55-114 CLAW BAR 10IN
PRICE
11.88
A.AYX
UOM
EA
A
PRICE
13.40
CX.LHX
STANLEY PRECISION CLAW BAR
STANLEY NAIL CLAW BAR
Heat-treated forged steel. Special extracting claw has beveled nail slot.
Length - 10-1/4". Stock size: 9/16".
ITEM #
301892
DESC
55-033 NAIL CLAW BAR 10-1/4IN
SP
[email protected]
UOM
EA
A
PRICE
9.67
H.LHX
Ideal for precision nail pulling and prying. Polished,
beveled claws for precise penetration. Flat striking face allows claw to be
driven under deeply embedded nails. Forged, high-carbon alloy steel for long
life. Tempered to help reduce chipping.
ITEM #
446688
DESC
SP
[email protected]
55-115 CLAW BAR 12IN
UOM
EA
A
PRICE
17.22
CO.LXZ
GREAT NECK NAIL CLAW
STANLEY BOSTITCH CLAW BAR
Drop forged construction. Comfortable rubber grip.
Made of forged, high carbon spring steel for extreme strength and durability.
Flat striking surface and polished beveled claws. Great for demolition, roofing,
flooring and framing. Ergonomic grip provides a better grip and protects from
extreme temperatures.
ITEM #
301280
ITEM #
237965
DESC
55-508 CLAW BAR 12IN BOSTITCH
SP
[email protected]
UOM
EA
A
PRICE
15.49
CZ.RAX
DESC
SP UOM PRICE
4.94
A
L.YCX
NC11 NAIL CLAW RUBBER GRIP -DROP FORGED [email protected] EA
Wrecking, Claw, Pry and Digging Bars, Nail
Pullers and Claw Bars, Utility Bars
STANLEY FATMAX UTILITY BAR
STANLEY RIPPING CHISEL
4-in-1 tool for prying, splitting, board bending and striking jobs. 2.5 lbs. - fits
easily in the hammer loop. One piece forged steel bar for increased durability.
Two-tiered jaws for grabbing common dimensional lumber & decking. Beveled
nail slot for pulling and prying nails. Textured grip for excellent comfort &
control, even when wet. Tempered steel that prevents chipping. 15" L.
Handyman. Carbon steel/offset pattern. Beveled nail
slots on both claws. Cutting edges ? 1-13/16", 1-1/2".
Stock size: 11/16".
ITEM #
301868
DESC
SP UOM PRICE
8.06
A
R.CXZ
55-818 RIPPING CHISEL 18IN OFFSET PATTERN [email protected] EA
ITEM #
108758
DESC
55-119 UTILITY BAR FATMAX 2.5LB
SP
[email protected]
STANLEY PRECISION CLAW PRY BAR
OLYMPIA UTILITY MINI BAR
Double ended nail puller. Forged high-carbon steel.
Heat treated for durability. Polished, beveled claws
allow precision nail pulling and prying. Flat striking face allows claw to be
driven under deeply embedded nails.
7 inch utility bar. Durable steel design corrosion
resistant finish. Claw head striking tip. 1.75 inch L x 1.00
inch W x 6.89 inch H.
ITEM #
280615
18
DESC
55-113 PRECISION CLAW BAR 8IN
SP
[email protected]
UOM
EA
A
PRICE
11.31
A.EYX
ITEM #
338389
DESC
76-482 UTILITY MINI BAR 7IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
UOM
CD
A
PRICE
25.46
CY.VOX
PRICE
2.59
C.EVX
www.wallacehardware.com
Hand & Power Tools
Wrecking, Claw, Pry and Digging Bars,
Wrecking Bars, Wrecking Bars
STANLEY RIPPING BAR
Forged Hexagonal Steel. High carbon steel for extra strength. Chisel end
beveled. Claw and chisel end polished, claw slotted.
ITEM #
264385
DESC
SP UOM PRICE
[email protected] EA
7.08
A
E.VXZ
55-118 RIPPING BAR 18IN FORGED
HEXAGONAL STEEL
STANLEY FATMAX WRECKING BARS
Cross-sectional. Larger than 3/4" hex bar. Flat "U"
shaped prying end. Provides lifting without damaging surfaces. Forged
recesses for better grip. Tri-Lobe cross section for greater comfort. Additional
slot specifically for pulling nails. Hi-visibility yellow paint.
ITEM #
124850
DESC
55-101 WRECKING BAR 14IN FATMAX
SP
[email protected]
124869
55-102 WRECKING BAR 24IN FATMAX
[email protected]
124877
55-104 WRECKING BAR 36IN FATMAX
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
9.27
R.YAX
14.80
CZ.CRX
17.85
CO.VOX
STANLEY BOSTITCH SPRING STEEL
WRECKING BAR
Ideal for heavy duty demolition work. Heat-treated 3/4" diameter spring steel
for extreme strength and durability. Low weight for ease of use. Precision
ground edge for better penetration. Flat striking surface. Slotted claw and
beveled ends.
ITEM #
237922
237930
DESC
SP UOM PRICE
15.97
A
CL.CZX
55-502 WRECKING BAR SPRING STEEL 36IN [email protected] EA
19.52
A
CV.AXZ
55-501 WRECKING BAR SPRING STEEL 24IN [email protected] EA
AMES TRUE TEMPER GOOSENECK
WRECKING BAR
DESC
11-730 BAR WRECKING GOOSENECK
www.wallacehardware.com
AMES TRUE TEMPER GOOSENECK
WRECKING BAR
Made of quality steel for longevity. 3/4 in bar stock. This tool is used to lever,
remove nails, pry boards, and generally break things. It also has a single
curved end and flattened points with a small slot on both ends for removing
nails.
ITEM #
301817
1170500 WRECKING BAR GOOSENECK 24IN [email protected] EA
DESC
SP
UOM PRICE
8.59
A
R.VRX
[email protected] EA
10.56
A
H.AZX
[email protected] EA
12.03
A
Y.XEX
301825
1171000 WRECKING BAR 30IN
301833
1171600 WRECKING BAR GOOSENECK 36IN
GREAT NECK WRECKING BAR
High grade, heat treated hex shank steel. Nail pulling claws and chisel ends.
5/8" Hex Shank.
ITEM #
301809
WR18 WRECKING BAR 18IN
DESC
SP
[email protected]
125555
WR12 WRECKING BAR 1/2X12IN
[email protected]
125547
WR24 BAR WRECKING BAR 3/4X24IN
[email protected]
125539
WR30 BAR WRECKING BAR 3/4X30IN
[email protected]
125520
WR36 WRECKING BAR 3/4X36IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
7.34
V.LOX
5.75
O.VCX
15.64
Y.CXZ
19.95
CZ.HLX
19.07
CZ.LXZ
JMK/IIT WRECKING BARS
12" heavy duty. High grade, heat treated hex shank
steel. Nail pulling claws and chisel ends. 1/2" Hex
Shank.
ITEM #
301795
DESC
50250 BAR WRECKING HD 12IN
SP
[email protected]
UOM
EA
A
PRICE
4.94
L.YLX
UOM
EA
A
EA
A
EA
A
PRICE
8.52
E.HXZ
11.45
H.RZX
24.20
CY.AEX
GRAINTEX WRECKING BAR
Made of quality steel for longevity. 3/4 in bar stock. This tool is used to lever,
remove nails, pry boards, and generally break things. It also has a single
curved end and flattened points with a small slot on both ends for removing
nails.
ITEM #
574295
Wrecking, Claw, Pry and Digging Bars,
Wrecking Bars, Wrecking Bars
SP
[email protected]
UOM
EA
A
PRICE
28.90
LZ.XHX
Drop forged, heat tempered.
ITEM #
321850
15-102 BAR WRECKING 24IN
DESC
SP
[email protected]
321915
15-104 BAR WRECKING 36IN
[email protected]
321923
15-105 BAR WRECKING 48INX1IN
[email protected]
1-800-776-0976 NOVEMBER
2016
19
Hand & Power Tools
Wrecking, Claw, Pry and Digging Bars,
Wrecking Bars, Wrecking Bars
Wrecking, Claw, Pry and Digging Bars, Pry
Bars, Pry Bars
VAUGHAN 5-1/2" MINI PRY BAR
STANLEY BOSTITCH MOULDING BAR
Double polished hammer faces. Double Utility Bar.
Chrome Finished. For prying and lifting boards,
loosening nails. Rocker head. Heads are drop forged
and perfectly heat treated for extra strength. This Pry
Bar has a Unique angle & length that allows a user to remove nails much
easier.
Designed for the professional or serious do-it-yourselfer. 10" moulding bar is
made of forged, high carbon spring steel for extreme strength, durability and
tempered for safety. Flat striking surface and beveled claws. Ergonomic grip
provides a better grip and protects from extreme temperatures.
ITEM #
522864
DESC
222 MINI BAR-5-1/2IN
SP
[email protected]
UOM
EA
A
ITEM #
237949
DESC
SP
[email protected]
55-506 MOULDING BAR 10IN
UOM
EA
A
PRICE
3.79
L.AEX
PRICE
12.01
Y.LVX
OLYMPIA FLAT PRY BAR - GORILLA BAR
VAUGHAN 15" ORIGINAL SUPERBAR
Original SuperBar is an essential tool for homeowners
and tradesmen. "Shepherd's Crook" rocker head
design for maximum prying power; 21" length provides
excellent leverage. Useful for prying molding, scraping and pulling nails.
Forged, spring tempered steel for heavy duty use. Three beveled nail slots;
polished, sharp blades for easy insertion.
ITEM #
522899
B215 SUPERBAR-15IN
DESC
SP
[email protected]
522910
B215L SUPERBAR-21IN
[email protected]
UOM
EA
A
EA
A
PRICE
12.33
Y.LHX
14.49
CX.AYX
15 inch. Industrial. The one bar that does it all-and
more. Use for: ripping bar, utility bar, wrecking bar, Ttype wrecking bar, nail puller. Leverage power
increased over 50%. Wider, flatter claw for better control. Resists sink into
support surface and prevents sideways roll. Oval shaped shank with rounded
edge and large circumference. High grade, one-piece forged steel
construction. Heat treated for strength and durability.
ITEM #
481424
STANLEY BOARD BENDER
20
DESC
93-310 BOARD BENDER 5/8IN STEEL BAR
SP UOM
[email protected] EA
A
UOM
EA
A
PRICE
4.49
L.REX
Extra long length for extra reach and more leverage.
Tightly radiused bend angle for precise positioning. Extra long tongue for
better grip and longer reach for hard-to-get-at places. Arch in center of bar
gives more swing during nail pulling-no need for a wood block. Works as a
panel lift: position pry end under panel, press down radiused end with foot,
hands-free operation. 15-1/2" Length, Blade Width Is 1-3/4".
295507
DESC
55-525 PRY BAR 15IN SUPER
WONDER BAR
55-526 WONDER BAR 21IN
INFO
SP UOM
15-1/2" LENGTH [email protected] EA
A
21" LENGTH
[email protected] EA
A
PRICE
11.65
A.HRX
14.47
CX.YLX
STANLEY WONDER BAR PRY BAR
Designed by builders to straighten deck and joist boards
faster and easier. Extra heavy duty, 5/8" high carbon steel
bar for extra strength and durability. Cushioned handle
designed for kneeling to maintain pressure - frees both
hands for nailing.
ITEM #
099325
SP
[email protected]
STANLEY SUPER WONDER PRY BAR
ITEM #
490482
Wrecking, Claw, Pry and Digging Bars,
Wrecking Bars, Board Benders
DESC
64-495 UTILITY BAR 15IN
Forged tool steel for extra toughness. Contoured bar
has polished and beveled cutting edges and nail slots on both ends. Ideal for
pulling nails, prying, lifting, scraping . Overall length - 12-1/2". Blade Width: 13/8".
PRICE
50.04
OH.ALX
ITEM #
301876
DESC
55-515 PRY BAR 12-3/4IN 13-3/8IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
6.70
E.XVX
www.wallacehardware.com
Hand & Power Tools
Wrecking, Claw, Pry and Digging Bars, Pry
Bars, Pry Bars
Wrecking, Claw, Pry and Digging Bars, Pry
Bars, Pry Bars
STANLEY PRECISION MOLDING PRY
BAR
GREAT NECK MINI PRY BAR
Nail puller - chisel scraper. Forged high-carbon steel. Heat treated for
durability. Tempered for safety. Polished, beveled claw allows precision nail
pulling and prying. Flat striking face allows claw to be driven under deeply
embedded nails.
ITEM #
301302
MIB5 MINI PRY BAR
SP
[email protected]
830844
MIB7 MINI PRY BAR 7IN
[email protected]
ITEM #
280658
5". Double ended pry bar. Heat treated for strength and durability.
DESC
SP
[email protected]
55-116 PRECISION MOLDING BAR 8IN
UOM
EA
A
DESC
UOM
EA
A
EA
A
PRICE
11.46
A.RCX
PRICE
4.06
L.VLX
3.55
L.CXZ
JMK/IIT FLAT PRY BAR
STANLEY WONDER BAR PRY BAR
Made of the finest tempered steel with nickel plated
finish. Convenient size. Individually carded. 7/8" blade width. 7" overall.
18" flat pry with curve. Drop forged, heat treated steel construction. Bar and
claw angle allows closer use near walls. Wide, flat claw base resists sink and
sideway roll. Black micro sanding finish adds strength and resists rust. Meets
or exceeds ANSI specs.
ITEM #
389803
ITEM #
127760
DESC
SP
[email protected]
55-045 PRY BAR/ WONDER BAR 7IN
UOM
EA
A
PRICE
4.33
O.LRX
GREAT NECK VERSABAR PRY BAR
15". Forged in one piece. Hardened & tempered for added strength and longer
durability.
ITEM #
350478
DESC
CVB15 VERSABAR PRY BAR 15IN
SP
[email protected]
UOM
EA
A
PRICE
5.87
O.VEX
DESC
SP
[email protected]
50206 FLAT PRY BAR W/CRV 18IN
UOM
EA
A
PRICE
7.42
V.OAX
STANLEY PRECISION MOLDING BAR
Ideal for reducing material damage when prying
molding and trim. Polished flat surface and beveled
claws for precise penetration. Forged, high-carbon spring steel for extreme
strength and durability. Tempered to help reduce chipping. Heat treated.
ITEM #
446742
DESC
55-117 MOLDING BAR 10IN N
SP
[email protected]
UOM
EA
A
PRICE
13.40
CX.CHX
HYDE WONDER BAR PRY BAR
Quality high carbon steel tool to pry off mouldings, open boxes, scrape,
pull out nails. Tool is 9-1/2". Card packaged.
ITEM #
382329
DESC
45600 BAR PRY / SCRAPER
SP
[email protected]
UOM
EA
A
PRICE
7.99
R.XCX
Forged alloy steel. Enameled. Bevel ground edges. 1-1/4" x 15". Heavy-duty.
DESC
GCVB15 PRY BAR HEAVY DUTY 15IN
www.wallacehardware.com
Adjustable jaws slide and clamp to fit onto objects for straightening and
prying. Crow bar end with nail puller slot. Striking hammer head surface slot.
Striking hammer head surface for striking. Large claw on head that adjusts for
leverage in pulling nails.
ITEM #
377457
HOWARD BERGER PRY BAR
ITEM #
236942
APEX CRESCENT ADJUSTABLE PRY
BAR/NAIL PULLER
SP
[email protected]
UOM
EA
A
PRICE
4.35
L.EOX
377376
377473
377384
DESC
SP UOM PRICE
32.42
A
LV.OVX
[email protected] EA
26.74
A
LX.LZX
[email protected] EA
37.40
A
LA.VAX
[email protected] EA
33.22
A
LE.XEX
DB16 PRY BAR ADJUSTABLE 16IN FLAT BLACK [email protected] EA
DB18X INDEXING PRY BAR CRESCENT 18IN
FLAT BLACK
DB24 PRY BAR ADJUSTABLE 24IN FLAT
BLACK
DB30X INDEXING PRY BAR CRESCENT 30IN
FLAT BLACK
1-800-776-0976 NOVEMBER
2016
21
Hand & Power Tools
Wrecking, Claw, Pry and Digging Bars, Pry
Bars, Pry Bars
APEX CRESCENT INDEXING BULL BAR
The double fork design provides balanced lift on both
sides of the nail. Boards are removed faster, cleaner
and with less effort. Rugged indexing joint allows for maximum flexibility and
increased leverage. Patent-pending center nail puller offering better balance
and more leverage. Precision tips designed for fast access between boards
and reduced damage for reclaiming materials. Gripping teeth on forks assist in
preventing board slippage. Dimensions: 44in x 5.5in x 2in (L x W x H).
ITEM #
381403
DESC
Wrecking, Claw, Pry and Digging Bars, Pry
Bars, Pry Bars
WILDE TOOL 3-PC HANDLE PRY BAR
SET
Square Stock Steel, Bent Tip black oxide finish. It's of
durable quality and highly efficient. Handle Type. Set
consists of 1 ea: 7", 12" 18".
ITEM #
525567
DESC
SP
A
SP UOM PRICE
[email protected] EA
103.56
A
HY.XRX
DKB44X INDEXING BULL BAR -CRESCENT
44IN
APEX CRESCENT FLAT PRY BAR
WILDE TOOL JIMMY PRY BAR
Precision ground ends for nail pulling with less material
damage. Nail slot in end and center for access to pulling nails. Durable high
visibility. Red finish is corrosion-resistant.
Natural finish. Made in the USA.
ITEM #
377279
FB13 PRY BAR FLAT CRESCENT 13IN RED
DESC
377287
FB15 PRY BAR FLAT CRESCENT 15IN RED
377252
FB7 PRY BAR FLAT CRESCENT 7IN RED
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
9.75
H.OZX
13.96
CX.VEX
6.49
V.AYX
UOM
HPB3-SQ.B/CC SET 3-PC HANDLE PRY BAR [email protected] EA
ITEM #
525571
JB2032.NP/HT PRY BAR JIMMY 5/8" X 16"
DESC
525572
JB2832.NP/HT PRY BAR JIMMY 7/8" X 30"
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
33.85
LE.VEX
PRICE
10.82
A.COX
23.29
CH.ECX
APEX CRESCENT MOLDING NAIL
REMOVAL PRY BAR
Striking face has ground surface for precision nailing. Precision ground ends
for nail pulling with less material damage. Nail slot in both claw and pry ends
for access to pulling. Durable high visibility red finish is corrosion-resistant.
ITEM #
377317
377368
377309
DESC
MB10 MOLDING PRY BAR CRESCENT 10IN
RED
MB12 MOLDING PRY BAR CRESCENT 12IN
RED
MB8 MOLDING PRY BAR CRESCENT 8IN RED
SP UOM PRICE
[email protected] EA
15.14
A
CZ.VCX
[email protected] EA
18.40
A
CO.HZX
[email protected] EA
11.06
A
A.OZX
Square Stock Steel, Bent Tip black oxide finish. It's of
durable quality and highly efficient. Handle type.
HPB12-7.B/HT PRY BAR W/ HANDLE 12"
525569
HPB16-18.B/HT PRY BAR W/ HANDLE 25"
525570
HPB20-28.B/HT PRY BAR W/ HANDLE 36"
22
DESC
ITEM #
525523
DESC
LB832.NP/HT LINE UP BAR 1/4" X 16"
SP
[email protected]
UOM
EA
A
PRICE
8.97
R.HEX
Wrecking, Claw, Pry and Digging Bars,
Digging Bars, Digging Bars
WILDE TOOL HANDLE PRY BAR
ITEM #
525568
WILDE TOOL LINE-UP PRY BAR
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
9.72
H.OCX
14.67
CZ.XOX
20.87
CE.RYX
PYTHON BY GARDEX POST HOLE
DIGGING BAR
Forged high carbon steel. Heat treated. Straight handle. 1" x 69" shank.
Tamper head and chisel point.
ITEM #
321818
DESC
15-112 BAR DIG POSTHOLE 17LB
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
37.76
LE.LEX
www.wallacehardware.com
Hand & Power Tools
Wrecking, Claw, Pry and Digging Bars,
Digging Bars, Digging Bars
Wrecking, Claw, Pry and Digging Bars,
Digging Bars, Crow Bars
GRAINTEX SAN ANGELO DIGGING BAR
GRAINTEX WEDGE POINT CROWBAR
Heat treated carbon steel. Flat chisel and pencil point. 1" hex .
1" x 1/4" x 60". Rounded handle & wedge point. High carbon steel. Heat
tempered.
ITEM #
321753
321745
15-108 CHISEL BAR 14LB
DESC
SP
[email protected]
15-111 BAR DIGGING 17LB
[email protected]
UOM
EA
A
EA
A
PRICE
27.70
LO.EYX
28.92
LV.HYX
ITEM #
321834
DESC
15-113 BAR CROW PINCH PT 18LB
SP
[email protected]
UOM
EA
A
PRICE
34.96
OX.HEX
AMES TRUE TEMPER SAN ANGELO BAR
60 inches long and weighs 14 pounds. This heavy-duty San Angelo bar is dropforged, heat treated carbon steel. Made of quality material that provides for
strength for clearing rocks and roots from postholes and ditches.
ITEM #
284874
30664 BAR SAN ANGELO 14LB
DESC
SP
[email protected]
284882
1160300 BAR SAN ANGELO 72IN 17LB
[email protected]
UOM
EA
A
EA
A
PRICE
35.12
LR.RVX
36.77
LH.ACX
AMES
Drop forged, high grade steel hex bar. Heat treated. 14 lbs. 60" L x 1"" W hex
shank diamond point and 1-1/8"" chisel point."
ITEM #
334863
DESC
11-743 SLATE BAR
SP
[email protected]
Wrecking, Claw, Pry and Digging Bars,
Digging Bars, Crow Bars
UOM
EA
A
PRICE
30.83
LO.LEX
AMES TRUE TEMPER WEDGE POINT
CROW BAR
The wedge point crow bar is 60-inch long straight heat treated carbon steel
bar. The long handle is utilized to pry and move heavy objects with its wedge
point. The typical uses for an 18-pound wedge point bar include breaking up
clay, concrete, and other hard materials.
ITEM #
334812
DESC
INFO
1160200 CROW BAR PINCH POINT 60"-160IN 18LB
3/8""
SHANK
DIA."
SP UOM PRICE
[email protected] EA
49.07
A
OH.CZX
Chisels, Wood Chisels, Wood Chisels
STANLEY FATMAX SHORT SERIES
WOOD CHISEL
Professional Contractor Grade. Cutlery grade steel. Blades have polished
finish. Crown shaped steel cap centers blow. Blade-3" long. 1/4" X 7-29/32".
ITEM #
328421
AMES TRUE TEMPER PINCH POINT
CROW BAR
302007
295426
The Pinch Point crow bar is a 48-inch long straight heat-treated steel for
maximum strength. This long hand tool is utilized to pry and lever heavy
objects. The typical uses for a pinch point crow bar include breaking up clay,
concrete, and other hard materials.
ITEM #
334839
DESC
1161400 CROW BAR PINCH POINT 10LB
www.wallacehardware.com
SP UOM
[email protected] EA
A
PRICE
34.95
LR.VZX
302023
302031
302058
302066
295442
DESC
16-973 WOOD CHISEL 1/4IN
FATMAX
16-975 WOOD CHISEL 1/2IN
FATMAX
16-974 WOOD CHISEL 3/8IN
WIDE FATMAX
16-977 WOOD CHISEL 3/4IN
FATMAX
16-978 WOOD CHISEL 1IN
FATMAX
16-979 WOOD CHISEL 11/4IN FATMAX
16-980 WOOD CHISEL 11/2IN FATMAX
16-981 WOOD CHISEL 2IN
WIDE FATMAX
1-800-776-0976 NOVEMBER
2016
INFO
1/4" X 7-29/32"""
SP UOM PRICE
[email protected] EA
11.00
A
A.VXZ
1/2" X 7-1/16"""
[email protected] EA
10.52
A
A.XCX
[email protected] EA
11.02
A
A.VLX
3/4" X 7-19/32""" [email protected] EA
10.91
A
A.LCX
1" X 7-19/32"""
[email protected] EA
11.77
A
A.YVX
1-1/4" X 7-19/32""" [email protected] EA
13.78
A
CX.VCX
1-1/2" X 7-23/32""" [email protected] EA
14.57
A
CZ.XYX
2" X 77.7"""
[email protected] EA
17.37
A
CO.LHX
23
Hand & Power Tools
Chisels, Wood Chisels, Wood Chisels
STANLEY BI-MATERIAL SHORT SERIES
WOOD CHISEL
SHEFFIELD WOOD CHISEL
Hardened and tempered chrome carbon steel blade for superior edge
retention. Short series blade for strength and control during use. Lacquered
for greater corrosion protection. Ergonomically designed impact resistant bimaterial handle made from polypropylene and TPR. Dual purpose packaging
enables the customer to evaluate product. Plastic hang card with snap-off, fulllength blade guard which protects working edges of blade when not in
ITEM #
264393
264407
265314
265322
265330
265349
DESC
SP UOM PRICE
[email protected] EA
6.91
A
E.LZX
16-308 CHISEL 1/2IN BI-MATERIAL
[email protected] EA
7.71
A
E.ACX
16-312 CHISEL 3/4IN W/ BI-MATERIAL HANDLE [email protected] EA 8.54
A
R.VAX
16-316 CHISEL 1IN W/ BI-MATERIAL HANDLE
[email protected] EA
9.37
A
H.CLX
16-320 CHISEL 1-1/4IN W/ B-MATERIAL
[email protected] EA
10.35
HANDLE
A
H.ALX
16-324 CHISEL 1-1/2IN W/ BI-MATERIAL
[email protected] EA
11.14
HANDLE
A
A.OZX
16-304 CHISEL 1/4IN BI-MATERIAL
High impact plastic handle. Drop forged blade for
strength and durability. Precision ground for sharpness.
ITEM #
830011
WC25 WOOD CHISEL 1/4IN
SP
[email protected]
150207
WC50 WOOD CHISEL 1/2IN
[email protected]
150215
WC75 WOOD CHISEL 3/4IN
[email protected]
150223
WC100 WOOD CHISEL 1IN
[email protected]
150231
WC125 WOOD CHISEL 1-1/4IN
[email protected]
150258
WC150 WOOD CHISEL 1-1/2IN
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
PRICE
4.53
L.RZX
4.28
L.VYX
4.53
L.RCX
4.68
L.HVX
5.71
O.OAX
7.83
V.RXZ
ITEM #
237345
237337
237310
237299
237272
237264
DESC
58421 WOOD CHISEL WITH ACETATE HANDLE
1/4IN
58422 WOOD CHISEL WITH ACETATE HANDLE
3/8IN
58423 WOOD CHISEL WITH ACETATE HANDLE
1/2IN
58424 WOOD CHISEL WITH ACETATE HANDLE
5/8IN
58425 WOOD CHISEL WITH ACETATE HANDLE
3/4IN
58426 WOOD CHISEL WITH ACETATE HANDLE
1IN
SP UOM PRICE
[email protected] EA
15.06
A
A.YOX
[email protected] EA
14.44
A
A.EHX
[email protected] EA
13.95
A
A.LAX
[email protected] EA
14.93
A
A.ARX
[email protected] EA
14.17
A
A.OLX
[email protected] EA
14.76
A
A.RHX
GREAT NECK WOOD CHISEL
ITEM #
107913
9101C WOOD CHISEL DYI 1/4IN
DESC
SP
[email protected]
108103
9103C WOOD CHISEL DYI 1/2IN
[email protected]
108189
9105C WOOD CHISEL DYI 3/4IN
[email protected]
108200
9106C WOOD CHISEL DYI 1IN
[email protected]
108340
9107C WOOD CHISEL DYI 1-1/4IN
[email protected]
108359
9108C WOOD CHISEL DYI 1-1/2IN
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
PRICE
10.07
R.CXZ
10.65
R.OCX
10.77
R.OLX
11.26
R.RLX
12.61
H.VAX
13.71
A.CVX
IRWIN MARPLES HIGH IMPACT CHISEL
Fully-forged steel core for unbeatable strength and durability. Extra-large
strike cap withstands repetitive hammer strikes and can be hit from multiple
angles. Split-proof acetate handle for reinforced toughness. High quality
hardened steel blade for superior performance and edge retention.
NICHOLSON WOODCHUCK CHISEL /
RASP COMBO
Steel strike plate to protect against breakage or "mushrooming". Oversize,
impact resistant acetate handle. Edge teeth for removal of materials in
confined areas. Forged steel to retain rasp and chisel sharpness longer.
ITEM #
094129
WC12CMN CHISEL RASP WCHK 1/2IN
094102
WC34CMN CHISEL RASP W/HANDLE 3/4IN
094110
WC1CMN RASP CHISEL WDCHK 1IN
24
Sheffield Wood Chisel. High carbon steel blade for strength and durability.
Tapered blade for balance. High impact acetate handle. Steel end cap for
striking power. Ergonomic rubber grip overlay with Sheffield Oval-Grip pattern.
High carbon steel blade for strength and durability. 3-Inch blade is
precision ground for accuracy. Comes with a high impact acetate
handle. Limited lifetime warranty.
GREAT NECK WOOD CHISEL
DESC
Chisels, Wood Chisels, Wood Chisels
DESC
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
9.53
H.LZX
10.97
A.OCX
11.18
A.VHX
ITEM #
388017
388025
388033
388041
388068
388076
DESC
SP UOM PRICE
[email protected] EA
13.05
A
A.YLX
[email protected] EA
13.60
A
Y.OXZ
[email protected] EA
14.87
A
CX.CRX
[email protected] EA
15.95
A
CX.YXZ
1819359 HIGH IMPACT CHISEL 1-1/2IN [email protected] EA
19.20
MARPLES
A
CO.CLX
1819360 HIGH IMPACT CHISEL 2IN - MARPLES [email protected] EA 25.04
A
CH.CLX
1819232 HIGH IMPACT CHISEL 1/4INMARPLES
1819234 HIGH IMPACT CHISEL 1/2INMARPLES
1819356 HIGH IMPACT CHISEL 3/4IN MARPLES
1819357 HIGH IMPACT CHISEL 1IN - MARPLES
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Chisels, Wood Chisels, Wood Chisels
IRWIN MARPLES CONSTRUCTION
CHISEL
GREAT NECK 3 PC. WOOD CHISEL SET
This all-purpose, bevel-edge chisel has a large strike cap and split-proof
handle withstands repetitive hammer strikes. Ergonomic handle design with
ProTouch Grip is durable enough to withstand jobsite abuse. High-carbon
steel blade delivers superior performance and edge retention, and stays sharp
to the last inch. IRWIN Tools Marples chisels have been the industry leader for
woodworkers for nearly 200 years.
DESC
Chisels, Wood Chisels, Wood Chisel Sets
ITEM #
531340
1768772 MS500 CHISEL 1/4IN
SP
[email protected]
531405
1768774 MS500 CHISEL 1/2IN
[email protected]
531413
1768776 MS500 CHISEL 3/4IN
[email protected]
531421
1768777 MS500 CHISEL 1IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
9.35
R.OYX
10.07
R.AZX
11.23
H.RAX
12.18
A.OZX
Chisels, Wood Chisels, Wood Chisel Sets
STANLEY 3 PC. FATMAX SHORT SERIES WOOD
CHISEL SET
High impact black molded plastic handles. Includes
sizes: 1/2", 3/4", 1".
ITEM #
108391
DESC
203K WOOD CHISEL SET ECON 3PC
SP
[email protected]
DESC
SP UOM
[email protected] EA
A
16-970 WOOD CHISEL SET 3PC FATMAX
Sheffield 3 Piece High Impact Acetate Wood Chisel Set. High carbon steel
blade for strength and durability. Tapered blade for balance. High impact
acetate handle. Steel end cap for striking power. Ergonomic rubber grip
overlay with Sheffield Oval-Grip pattern.
ITEM #
237221
PRICE
30.65
LO.CZX
STANLEY 3 PC. BI-MATERIAL CHISEL SET
DESC
58420 WOOD CHISEL SET 3PC ACET
SP
[email protected]
DESC
16-300 CHISEL SET 3PC BI-MATERIAL
SP
[email protected]
UOM
ST
A
DESC
www.wallacehardware.com
DESC
1819362 HIGH IMPACT CHISEL CLAM 3PC
SP UOM
[email protected] CD
A
PRICE
42.43
LY.XZZ
PRICE
24.36
CA.VCX
IRWIN MARPLES 3 PIECE CHISEL SET
Full size rugged, shock absorbing handles with no-roll feature.
Durable precision ground cutting edges. Blades are uniformly
hardened for full length use. Heat-treated steel blades, lacquer
coated blades resist rust. Set includes: 1/2", 3/4", 1".
16-150 WOOD CHISEL SET 3PC
PRICE
40.15
LO.ACX
IRWIN MARPLES HIGH IMPACT CHISEL
SET
ITEM #
388084
STANLEY 3 PC. WOOD CHISEL SET
ITEM #
389579
UOM
ST
A
Set includes 3 chisels: 1 in., 3/4 in. and 1/2 in. All chisels
feature a steel core with split proof acetate handle. A
multi-angle strike cap is on end of the handle.
Hardened and tempered chrome carbon steel blade for superior
edge retention. Short series blade for strength and control during
use. Lacquered for corrosion protection. Ergonomically designed,
bi-material handle is impact resistant. Blade guard protects
working edges of blade when not in use. Blade guard can be
mounted to wall for home storage. Sizes: 1/2, 3/4, and 1 inch.
ITEM #
264350
PRICE
13.34
H.YCX
SHEFFIELD 3 PIECE HIGH IMPACT
ACETATE WOOD CHISEL SET
Short series. Professional Contractor Grade. High quality steel.
Durable storage case sets on work area for easy selection.
ITEM #
389889
UOM
CD
A
SP
[email protected]
UOM
EA
A
PRICE
12.11
Y.CZX
This all-purpose, bevel-edge chisel has a large strike cap and splitproof handle withstands repetitive hammer strikes. Ergonomic
handle design with ProTouch Grip is durable enough to withstand
jobsite abuse. High-carbon steel blade delivers superior performance
and edge retention, and stays sharp to the last inch. IRWIN Tools
Marples chisels have been the industry leader for woodworkers for nearly 200
years.
ITEM #
531448
DESC
1768781 MS500 3PC - WAL - 1/2IN; 3/4IN;
1IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
34.98
A
LO.YCX
25
Hand & Power Tools
Chisels, Brick Chisels, Brick Chisels
Chisels, Brick Chisels, Brick Chisels
STANLEY MASON'S CHISEL
STANLEY CONCRETE CHISEL
One-piece hardened, quenched and tempered chrome vanadium steel.
Powder coat finish. Use for cutting and splitting hard stone, brick and
concrete.
Ideal for cutting through and breaking up concrete.
Durable bull point that cuts fast and lasts long. Ergonomic, bi-material hand
guard helps protect from overstrike, reduces slipping and absorbs vibrations.
One-piece construction forged for strength. 1 inch heat-treated tip allows for
additional sharpening. Hardened, quenched and tempered for long life and
durability. Powder-coated finish for easy visibility.
ITEM #
303828
16-294 MASON'S CHISEL 1-3/4INX8-1/2IN
DESC
303836
16-295 MASON'S CHISEL 2-3/4INX8-1/2IN
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
6.11
V.RXZ
7.66
E.HOX
STANLEY BRICK SET WITH HAND
GUARD
303968
DESC
16-329 CONCRETE CHISEL W/ HAND GUARD
3/4IN
SP UOM PRICE
[email protected] EA
11.46
A
A.HAX
STANLEY MASONRY CHISEL
One-piece hardened, quenched and tempered chrome vanadium steel.
Powder coat finish. Use for cutting and splitting brick and concrete. Ergonomic
Bi-material hand guard.
ITEM #
303933
ITEM #
446106
DESC
SP UOM PRICE
10.67
A.CLX
11.98
Y.XEX
16-327 BRICK SET 3X8-1/2 W/BI-MATERIAL HDL [email protected] EA
GUARD
A
16-328 BRICK SET 4X8-1/2 W/BI-MATERIAL HDL [email protected] EA
GUARD
A
Ideal for cutting hard stone, brick and concrete.
Ergonomic, bi-material hand guard helps protect from
overstrike, reduces slipping and absorbs vibrations. One-piece construction
forged for strength. 1 inch heat-treated tip allows for additional sharpening.
Hardened, quenched and tempered for long life and durability. Powder-coated
finish for easy visibility.
ITEM #
446203
DESC
16-334 MASONS CHISEL W/ HAND GUARD 23/4IN
SP UOM PRICE
[email protected] EA
11.46
A
A.HAX
Chisels, Floor Chisels, Floor Chisels
GOLDBLATT BRICKLAYER SET WITH
BEVEL EDGE
STANLEY FLOOR CHISEL WITH HAND
GUARD
Designed for scoring, cutting and trimming bricks and
blocks. Length 7"- 4" wide blade.
ITEM #
547239
DESC
G01134 BRICK SET 4IN
SP
[email protected]
UOM
EA
A
PRICE
15.31
CX.LCX
STANLEY WORKS BRICK SET
26
DESC
16-296 CHISEL BRICK SET 3INX8-1/2IN
SP
[email protected]
UOM
EA
A
ITEM #
304026
DESC
16-331 FLOOR CHISEL 3X11 W/BI-MATERIAL
HAND GUARD
SP UOM PRICE
[email protected] EA
11.37
A
A.EHX
STANLEY FLOOR CHISEL
Cutting edge is hardened to 52-58 HRC and is ground to a precise
angle for efficient cutting and durability. Striking edge hardened to
42 HRC and has chamfered edges to help resist chipping. Used for
cutting and splitting brick and concrete. One-piece construction
forged from chrome vanadium steel. Yellow powder-coated finish. 3
in. x 8.5 in.
ITEM #
446068
With hand guard. Used for cutting, prying or ripping of hardwood flooring and
nails. Designed with offset blade. Shorter bite for increased leverage.
Ergonomic bi-material hand guard.
Used for cutting, prying or ripping of hardwood flooring and nails. Designed
with offset blade. Shorter bite for increased leverage.
ITEM #
303801
DESC
16-293 FLOOR CHISEL 3INX11IN
SP
[email protected]
UOM
EA
A
PRICE
9.68
H.OLX
PRICE
7.85
E.YHX
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Chisels, Cold Chisels, Cold Chisels
Chisels, Cold Chisels, Cold Chisels
STANLEY COLD CHISEL WITH HAND
GUARD
WILDE TOOL COLD CHISEL
One-piece tempered and hardened construction. Powder coat finish. Bimaterial hand guard. For cutting/shaping wrought iron, cast iron, steel, brass,
bronze, copper, aluminum, bolts, nuts and rivets.
ITEM #
304034
DESC
SP UOM PRICE
[email protected] EA
10.85
A
A.CAX
16-332 COLD CHISEL 1X12 W/BI-MATERIAL
HAND GUARD
Hardened, quenched and tempered to precise
specifications. Hand ground cutting edge.
ITEM #
525513
525514
525515
525516
525517
525518
STANLEY COLD CHISEL
525519
One-piece tempered and hardened construction. Powder coat finish. For
cutting/shaping wrought iron, cast iron, steel, brass, bronze, copper,
aluminum, nuts and rivets.
ITEM #
303550
16-286 COLD CHISEL 3/8INX5-9/16IN
DESC
SP
[email protected]
303623
16-287 COLD CHISEL 1/2INX6IN
[email protected]
303631
16-288 COLD CHISEL 5/8INX6-3/4
[email protected]
303674
16-289 COLD CHISEL 3/4INX6-7/8
[email protected]
303712
16-290 COLD CHISEL 7/8INX8IN
[email protected]
303739
16-291 COLD CHISEL 1INX12IN
[email protected]
303798
16-292 FLAT COLD CHISEL 1-1/4INX12IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
3.45
L.ROX
3.70
L.HYX
3.80
L.AHX
4.63
O.VAX
5.75
V.OAX
7.32
E.ECX
6.15
V.RYX
DESC
SP UOM PRICE
[email protected] EA
4.12
A
O.XYX
CC1232.NP/HT CHISEL COLD 3/8" X 5-1/4"
[email protected] EA
4.19
A
O.CEX
CC1632.NP/HT CHISEL COLD 1/2" X 6"
[email protected] EA
4.79
A
O.RXZ
CC2032.NP/HT CHISEL COLD 5/8" X 6-1/2" [email protected] EA
6.03
A
V.EVX
CC2432.NP/HT CHISEL COLD 3/4" X 7"
[email protected] EA
6.54
A
V.YCX
CC2832.NP/HT CHISEL COLD 7/8" X 7-1/2"
[email protected] EA
8.64
A
R.EXZ
CCL3232.NP/HT CHISEL LONG COLD 1" X 12" [email protected] EA
11.73
A
A.ALX
CC832.NP/HT CHISEL COLD 1/4" X 4-3/4"
Chisels, Cold Chisels, Cold Chisel Sets
STANLEY 3 PC. COLD CHISEL SET
3 Piece. One-piece forged chrome vanadium
construction. Hardened, quenched and tempered. Powder coat finish. For
cutting & shaping wrought iron, cast iron, steel, brass, bronze, copper,
aluminum, bolts, nuts and rivets. Set includes: 1/2" x 6", 5/8" x 6-3/4", 3/8" x 59/16".
ITEM #
303917
DESC
16-298 CHISEL COLD KIT 3PC
SP
[email protected]
UOM
KT
A
PRICE
10.18
H.RAX
JMK/IIT 4 PC. COLD CHISEL SET
Hexagonal shanks. Heat treated steel. Chrome plated. Vinyl
grips. Set includes: 3/8" x 5" x 5/16" Hex, 1/2" x 5-3/4" x 7/16" Hex,
5/8" x 6" x 1/2" Hex and 3/4" x 7" x 5/8" Hex.
GREAT NECK FLAT COLD CHISEL
Drop forged steel. Heat treated for strength and durability. 5/16" bit width. 5"
length x 1/4" Diameter.
ITEM #
360074
501C FLAT COLD CHISEL 5X1/4IN
193100
504C FLAT COLD CHISEL 5/5/16IN
360082
505C FLAT COLD CHISEL 6X3/8IN
360090
511C FLAT COLD CHISEL 6X5/8IN
193119
518C FLAT COLD CHISEL 7X3/4IN
360112
DESC
527C FLAT COLD CHISEL 8X7/8IN
www.wallacehardware.com
INFO
SP UOM
5/16" HEX" [email protected] CD
A
3/16" HEX" [email protected] CD
A
7/16" HEX" [email protected] CD
A
1/2" HEX" [email protected] CD
A
5/8" HEX" [email protected] CD
A
3/4" HEX" [email protected] CD
A
PRICE
2.75
C.REX
2.88
C.HLX
3.35
C.YZX
4.43
L.RZX
6.23
O.HCX
6.83
V.CXZ
ITEM #
338230
DESC
21320 WOOD CHISEL SET 4PC
SP
[email protected]
UOM
ST
A
PRICE
11.14
R.EAX
WILDE TOOL COLD CHISEL SET
5-pc Cold Chisel set in clear, sturdy, zipper seal hang-up vinyl. Set
includes 1 ea: CC1032, CC1232, CC1632, CC2032, CC2432.
ITEM #
525512
DESC
CC5.NP/VP SET 5-PC COLD CHISEL
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
19.77
CV.AHX
27
Hand & Power Tools
Punches and Nail Sets, Punches, Pin Punch
STANLEY PIN PUNCH
One-piece forged, tempered tool steel construction. Hardened and tempered.
Powder coat finish. Use for starting drill holes.
ITEM #
303429
DESC
16-229 STARTER PUNCH 3/32INX5-1/2IN
303437
16-230 PIN PUNCH 1/16INX6IN
303445
16-231 PIN PUNCH 1/8INX6IN
303461
16-233 PIN PUNCH 3/16INX6IN
303488
16-234 PIN PUNCH 1/4INX6IN
303518
16-235 PIN PUNCH 5/16INX6IN
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
3.06
L.OVX
2.80
L.CZX
2.24
C.RAX
2.22
C.RYX
2.78
L.CXZ
2.30
C.HVX
Punches and Nail Sets, Punches, Center
Punch
STANLEY CENTER PUNCH
One-piece forged, tempered tool steel construction. Hardened and tempered.
Powder coat finish. Use for marking metal or making indentations for starting
drill holes.
ITEM #
303380
16-227 CENTER PUNCH 1/4INX4IN
DESC
SP
[email protected]
303399
16-228 CENTER PUNCH 5/16INX4-1/2IN
[email protected]
UOM
EA
A
EA
A
PRICE
2.20
C.RZX
3.52
L.RHX
VERMONT AMERICAN CENTER PUNCH
WILDE TOOL PIN PUNCH
Ideal for centering drill bits. Hardened and tempered steel for long life.
Ground point stays sharp. Double-knurled shank for easy gripping. 3-1/2" long,
point diameter: 1/16".
High Carbon Molybdenum Steel for strength and
durability. Polished finish. It's of durable quality and
highly efficient.
ITEM #
525531
PP232.NP/HT PUNCH PIN 1/16" X 4-1/4"
DESC
525533
PP332.NP/HT PUNCH PIN 3/32" X 4-3/4"
525562
PP432.NP/HT PUNCH PIN 1/8" X 5"
525564
PP532.NP/HT PUNCH PIN 5/32" X 5-1/4"
525565
PP632.NP/HT PUNCH PIN 3/16" X 5-1/2"
525566
PP832.NP/HT PUNCH PIN 1/4" X 7"
ITEM #
371173
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
5.87
V.VCX
5.87
V.VCX
4.12
O.XYX
4.12
O.XYX
4.12
O.XYX
4.45
O.OEX
Punches and Nail Sets, Punches, Prick Punch
STANLEY PRICK PUNCH
DESC
14990 CENTER PUNCH 3-1/2IN
SP
[email protected]
UOM
CD
A
PRICE
3.02
C.YRX
WILDE TOOL CENTER PUNCH
High Carbon Molybdenum Steel for strength and
durability. Polished finish. It's of durable quality and
highly efficient.
ITEM #
525524
PC832.NP/HT PUNCH CENTER 1/4" X 4-1/4"
DESC
525525
PC1232.NP/HT PUNCH CENTER 3/8" X 5"
525526
PC1632.NP/HT PUNCH CENTER 1/2" X 6"
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
4.95
O.HLX
4.36
O.LAX
5.36
V.XOX
Used for marking metal. One-piece construction forged
from tempered tool steel for strength. Hardened and tempered for long life.
Powder coat finish for increased visibility. 3/8" x 5-1/2".
ITEM #
303526
DESC
SP
[email protected]
16-236 PRICK PUNCH 3/8INX5-1/2IN
UOM
EA
A
PRICE
2.78
L.CXZ
WILDE TOOL LONG TAPER PUNCH
High Carbon Molybdenum Steel for strength and
durability. Polished finish. It's of durable quality and
highly efficient.
GREAT NECK PRICK PUNCH
5 1/2" prick punch. Drop forged steel. Heat treated for strength and durability.
ITEM #
315176
28
DESC
334C PRICK PUNCH 5IN
SP
[email protected]
UOM
CD
A
PRICE
3.18
C.AHX
ITEM #
525511
525530
DESC
SP UOM PRICE
6.63
A
V.YAX
[email protected] EA
7.30
A
E.VYX
PLT632.NP/HT PUNCH LONG TAPER 3/16" X 9" [email protected] EA
PLT1032.NP/HT PUNCH LONG TAPER 5/16" X
11"
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Punches and Nail Sets, Punches, Center
Punch
Punches and Nail Sets, Punches, Punch and
Chisel Sets
WILDE TOOL SOLID PUNCH
JMK/IIT 14 PIECE COLD CHISEL/PUNCH
SET
High Carbon Molybdenum Steel for strength and
durability. Polished finish. It's of durable quality and
highly efficient.
ITEM #
525527
PS432.NP/HT PUNCH SOLID 1/8" X 4-1/2"
DESC
525528
PS832.NP/HT PUNCH SOLID 1/4" X 6"
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
4.12
O.XYX
5.03
O.HAX
Punches and Nail Sets, Punches, Leather
Punch
Premium-quality tools made of drop forged highcarbon steel, heat treated. Finely finished from their mat-black hex-shafts to
polished steel working ends. Use on cold metal to flatten, indent, groove,
reduce thickness, remove trash, cut rods, bars & sheets. 5 flat cold chisels; 8
round flat-end punches (4 tapered, 4 constant dia.), 1 pointed center punch.
Rubberized roll-up pouch keeps them organized, evenly oiled and dry for
stowing and trans
ITEM #
127809
DESC
21010 PUNCH/CHISEL SET 14PC
SP
[email protected]
UOM
ST
A
PRICE
33.97
LX.CHX
JMK/IIT REVOLVING LEATHER PUNCH
Heavy duty hole punch tool. Heat treated forged steel. Punches
clean, neat holes in leather and other soft materials.
ITEM #
232882
DESC
SP
[email protected]
90250 PUNCH LEATHER REVOLVING
UOM
CD
A
PRICE
7.37
V.OVX
Punches and Nail Sets, Punches, Punch Kits
STANLEY 6 PC. PUNCH KIT
DESC
16-226 PUNCH KIT 6 PC
SP
[email protected]
UOM
KT
A
PP5.NP/VP SET 5-PC PIN PUNCH
www.wallacehardware.com
SP
[email protected]
UOM
KT
A
PRICE
26.55
CY.YOX
WILDE TOOL PUNCH AND CHISEL SET
5-Piece Punch & Chisel Set in a clear, sturdy, zipper seal hang-up
vinyl pouch. Set consists of 1 ea: 3/8" & 5/8" Cold Chisels, 3/8" Center
Punch, 3/16" Pin Punch, and 3/16" Solid Punch.
5-pc Pin Punch Set in a clear, sturdy, zipper seal hangup vinyl pouch. Set consists of 1 ea PP332, PP432,
PP532, PP632, PP832.
DESC
DESC
16-299 PUNCH & CHISEL KIT 12PC
PRICE
13.36
CX.XEX
WILDE TOOL PIN PUNCH SET
ITEM #
525563
12 Piece. One-piece forged, tempered tool steel construction.
Hardened and tempered. Powder coat finish. Set includes: 1/4"
x 4" Center Punch, 5/16" x 4-1/2" Center Punch, 3/32" x 5-1/2"
Starter Punch, 1/16" x 6" Pin Punch, 1/8" x 6" Pin Punch, 5/32" x
6" Pin Punch, 3/16" x 6" Pin Punch, 1/4" x 6" Pin Punch, 5/16" x
6" Pin Punch, 3/8" x 5-9/16" Cold Chisel, 1/2" x 6" Cold Chisel, 3/4" x 6-7/8"
Cold Chisel.
ITEM #
303925
6 Piece. One-piece forged, tempered tool steel
construction. Hardened and tempered. Powder coat
finish. Set includes: 1/16", 1/8", 5/32", 3/16", 1/4", 5/16"
all are 6" in length.
ITEM #
303364
STANLEY 12 PC. PUNCH & CHISEL KIT
SP
[email protected]
UOM
EA
A
PRICE
17.26
CL.YAX
ITEM #
525520
K5.NP/VP SET 5-PC PUNCH AND CHISEL
DESC
525521
K8.NP/VR SET 8-PC PUNCH AND CHISEL
525522
K12.NP/VR SET 12-PC PUNCH AND CHISEL
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
17.35
CO.XEX
42.49
OC.YEX
60.24
VE.LYX
29
Hand & Power Tools
Punches and Nail Sets, Nail Sets, Nail Sets
Punches and Nail Sets, Nail Sets, Nail Sets
STANLEY CONTRACTOR'S NAIL SET
GREAT NECK NAIL SET
Contractor Grade. Cushioned grip is designed for a non-slip grip in all
weather conditions. Shock absorbing ribbed grip for precision hold. 25%
longer length makes it easy to set nail in hidden and "hard-to-reach"
areas. Color coded by tip size makes it easy to locate. Full-hardened;
precision-milled steel for extra long life. Long beveled tip for easier nail
head alignment. Designed by and for the pro. Lifetime warranty.
Made of heat treated alloy steel. Accurately sets nails for molding.
ITEM #
486574
486582
486590
DESC
SP UOM PRICE
58-911 NAIL SET -1/32IN TIP YELLOW CUSHION [email protected] EA 3.84
GRIP
A
L.AYX
58-912 SET NAIL - 2/32IN TIP GRAY CUSHION [email protected] EA 3.84
GRIP
A
L.AYX
58-913 SET NAIL - 3/32IN TIP RED CUSHION
[email protected] EA
3.89
GRIP
A
L.YVX
ITEM #
107832
NS1C NAIL SET 1/32IN
DESC
SP
[email protected]
107840
NS2C NAIL SET 2/32IN
[email protected]
107859
NS3C NAIL SET 3/32IN
[email protected]
UOM
CD
A
CD
A
CD
A
PRICE
2.16
C.LHX
2.16
C.LHX
2.20
C.LAX
GREAT NECK 3 PC. NAIL SET
Contains sizes 1/32", 2/32", 3/32". Made of heat
treated alloy steel. Accurately sets nails for molding.
ITEM #
107905
STANLEY SQUARE HEAD NAIL SET
DESC
NSK NAIL SET 3PC
SP
[email protected]
Hardened and tempered alloy steel nail set has square head to prevent rolling.
Round knurled body with black phosphate finish. Tips are cupped and
chamfered. Overall length: 4".
ITEM #
303178
58-111 NAIL SET 4X1/32IN STEEL
DESC
SP
[email protected]
303186
58-112 NAIL SET4X 2/32IN STEEL
[email protected]
303194
58-113 NAIL SET 4X3/32IN STEEL
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
1.94
C.VRX
1.94
C.VRX
1.94
C.VHX
UOM
CD
A
PRICE
5.14
L.YZX
GREAT NECK NAIL SET
4/32 carded. Made of heat treated alloy steel.
ITEM #
107867
DESC
SP
[email protected]
NS4C NAIL SET 4/32IN
UOM
CD
A
PRICE
2.20
C.OCX
Planes and Files, Planes, Block Planes
STANLEY 3 PC. CONTRACTOR'S NAIL SET
Contractor Grade. 3 Piece set. Cushioned grip is designed for a nonslip grip in all weather conditions. Shock absorbing ribbed grip for
precision hold. 25% longer length makes it easy to set nails in hidden
and "hard-to-reach" areas. color coded by tip size makes it easy to
locate. Long beveled tip for easier nail head alignment. Fullhardened, precision-milled steel for extra long life. Designed by and for the
pro. Lifetime warranty. One each:
ITEM #
342505
DESC
SP
[email protected]
58-930 NAIL SET 3PC CUSHION GRIP
UOM
EA
A
PRICE
8.22
R.CAX
30
DESC
ITEM #
317152
DESC
SP UOM
[email protected] EA
A
12-960 LOW ANGLE BLOCK PLANE 6-1/4IN
PRICE
50.95
OA.ALX
Cast iron bottom plane has tempered tool steel cutter
positioned at 21 deg. angle. Adjust cutter endwise by
rotating steel adjusting screw. Bottom and sides are milled and ground.
Stained hardwood knob.
Assortment of 3 nail sets. One each of 1/32", 2/32", and 3/32".
Skin carded.
58-230 NAIL SET 3PC STEEL
Contractor's grade. Tempered tool steel cutter
positioned at 12 deg. angle planes easily across
hardwood?adjusted endwise with knurled screw. Adjust mouth for coarse or
fine work. Cast iron bottom. Finger grips in side. Plane length?6". Cutter width:
1-3/8".
STANLEY BLOCK PLANE
STANLEY 3 PC. NAIL SET
ITEM #
303216
STANLEY BLOCK PLANE
SP
[email protected]
UOM
EA
A
PRICE
5.26
O.YRX
ITEM #
317160
DESC
12-220 BLOCK PLANE 1-5/8IN-7IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
27.50
LX.YZX
www.wallacehardware.com
Hand & Power Tools
Planes and Files, Planes, Block Planes
Planes and Files, Planes, Trimming Planes
STANLEY BLOCK PLANE
STANLEY TRIMMING PLANE
Hand adjustable. Cast iron bottom is milled. Tempered
tool steel cutter adjusts by loosening wheel and moving
cutter endwise. Blue finish with cast-in finger rest. Red
finished lever.
Small, light plane, handy for modeling, sculpture, odds
and ends of light work. Sides and trimmings are
durable nickel finish. Individually carded.
ITEM #
317209
DESC
SP
[email protected]
12-247 BLOCK PLANE 1-5/8IN WD
UOM
EA
A
PRICE
19.16
CV.EYX
Hardened and tempered. 1 9/16" blade. Machined and
polished die cast body. Plastic handle.
DESC
C2 PLANE BLOCK 6-1/2IN
SP
[email protected]
UOM
EA
A
PRICE
20.20
CZ.YAX
UOM
EA
A
PRICE
8.00
R.CXZ
DESC
58452 MINI BLOCK PLANE 3IN
Sturdy metal alloy framed and molded handle allow for
heavy removal. Contoured handle and grip for comfortable control. Furnished
with regular flat cut blade. Individually carded. 11-1/4" L x 1-5/8" W.
ITEM #
317268
3 inches. Hardened and tempered 1-inch width cutter
for smooth and accurate cutting. Die cast, accurately
machined, body for strength. Painted to resist rust.
Miniature adjustable plane for models and cabinets. Contoured shape for easy
grip.
SP
[email protected]
UOM
EA
A
PRICE
7.07
V.CYX
DESC
SP UOM
[email protected] EA
A
SP
[email protected]
UOM
EA
A
PRICE
14.50
CX.YHX
STANLEY SURFORM SHAVER
Lightweight, one handed tool works on pull stroke for
curved surfaces, precision work, arts and crafts. Furnished with clip-on type
regular cut blade plus one extra blade. Individually carded. 7-1/4" L x 1-5/8" W.
Sheffield Adjustable Block Plane. Low angle blade for
precision work. Hardened and tempered 1-5/8'' width cutter for longer life.
Cast iron body for strength. Machine polished to resist rust. Accepts Sheffield
replacement blade 58472.
58450 BLOCK PLANE ADJUSTABLE 7IN
DESC
21-296 PLANE BLADE REGULAR CUT
Planes and Files, Planes, Surform Shavers
ITEM #
377449
SHEFFIELD ADJUSTABLE BLOCK PLANE
ITEM #
237736
SP
[email protected]
STANLEY SURFORM PLANE
SHEFFIELD BLOCK PLANE
ITEM #
237787
DESC
12-101 TRIMMING PLANE 1IN X 3-1/2IN
Planes and Files, Planes, Surform Planes
GREAT NECK 6-1/2" BLOCK PLANE
ITEM #
125989
ITEM #
389919
DESC
SP
[email protected]
21-115 SHAVER SURFORM 7-1/4IN
UOM
EA
A
PRICE
3.92
L.YZX
Planes and Files, Planes, Plane Blades
PRICE
26.68
CE.AOX
STANLEY SURFORM TOOLS SANDING BLADES
SHEFFIELD ADJUSTABLE 9'' BENCH
PLANE
Sheffield Adjustable 9'' Bench Plane. Dual wood
handles for precision work. Hardened, tempered 2'' width cutter for longer
life. Cast iron, machine polished body for strength and to resist rust.
Ergonomic rubber grip overlay with Sheffield Oval-Grip pattern. Accepts
Sheffield replacement blade 58470.
ITEM #
237779
DESC
58453 BLOCK PLANE ADJUSTABLE 9IN
www.wallacehardware.com
SP UOM
[email protected] EA
A
PRICE
55.69
OZ.XVX
Carbide Grit. Fits Surform tools for sanding wood, plastic, paint, varnish.
Outlast sandpaper, won't rip or tear. No sharpening or adjusting.
Lacquer coated to resist corrosion. Steel blade coated with tungsten
carbide grit 10" L x 1-5/8" W. For plane and file type Surform tools. Flat
style. 10" Half-round Regular Cut.
ITEM #
317322
317284
21-299 REGULAR CUT 10IN REPL 10" HALFBLADE -HALF ROUND
ROUND
DESC
SP UOM PRICE
[email protected] EA
5.07
A
O.AXZ
21-293 FLAT REPLACEMENT
BLADE -STANDARD CUT 10IN
[email protected] EA
A
1-800-776-0976 NOVEMBER
2016
INFO
REGULAR
CUT"
10" FLATREGULAR
CUT"
4.91
O.HVX
31
Hand & Power Tools
Planes and Files, Planes, Plane Blades
Planes and Files, Files, Mill Bastard File
STANLEY SURFORM POCKET TYPE
PLANE BLADE
NICHOLSON AMERICAN PATTERN MILL
BASTARD FILE
Versatile one handed speed cutting and trimming tool. Fits in apron or
overalls pocket. Die cast zinc alloy body. Furnished with all purpose cutting
blade. 5-1/2" L x 1-5/8" W.
Bastard cut. For sharpening mill or circular saws. Also for draw filing and
finishing metals. All sizes tapered slightly in width. Two square edges. Single
cut on sides and edges.
ITEM #
317349
ITEM #
365823
21687N MILL BASTARD FILE 6IN
SP
[email protected]
365831
21694N MILL BASTARD FILE 8IN
[email protected]
365858
21701N MILL BASTARD FILE 10IN
[email protected]
329940
08354N MILL BASTARD FILE 6IN
[email protected]
329959
08497N MILL BASTARD FILE 8IN
[email protected]
329967
08642N MILL BASTARD FILE 10IN
[email protected]
329975
08737N MILL BASTARD FILE 12IN
[email protected]
355127
21825N MILL BASTARD FILE 6IN
[email protected]
355135
21832N MILL BASTARD FILE 8IN
[email protected]
355143
21839N MILL BASTARD FILE 10IN
[email protected]
306177
21842N FILE MILL BASTARD 12IN
[email protected]
DESC
SP
[email protected]
21-399 POCKET PLANE 6IN PLANE TYPE
UOM
EA
A
PRICE
6.37
V.HYX
STANLEY SURFORM POCKET TYPE
REPLACEMENT BLADE
Tool steel 5-1/2" x 1-5/8". All purpose cut. For straight cuts on hardwood, end
grain, plywood, chipboard, plaster, metal, plastics, etc. Individually carded.
Fits #21-399.
ITEM #
317357
DESC
SP UOM PRICE
[email protected] EA
3.62
A
L.HOX
21-398 POCKET FINE CUT REPLACEMENT
BLADE 5-1/2
DESC
UOM
CD
A
CD
A
CD
A
EA
A
EA
A
EA
A
EA
A
CD
A
CD
A
CD
A
CD
A
PRICE
6.20
V.RYX
7.18
E.VXZ
9.22
H.XOX
5.10
O.ARX
6.14
V.RVX
7.88
E.YRX
12.96
Y.AOX
5.38
V.XVX
5.84
V.OYX
7.47
E.RLX
12.32
Y.LRX
SIMONDS AMERICAN PATTERN MILL
BASTARD FILE
Used for sharpening saws, farm tools, axes and various other edged tools. In
machine shops it is used as a general purpose file as well as draw filing, lathe
work and finishing operation on hard materials.
STANLEY SURFORM SHAVER REPLACEMENT
BLADES
Regular cut with edge cut feature. All purpose blade for use on
woods, vinyl, plaster, linoleum, autobody filler and soft metals.
Carded two per card. Fits #21-115.
ITEM #
377465
DESC
21-515 BLADES SURFORM 1PK
SP
[email protected]
UOM
CD
A
ITEM #
333301
73-143000 MILL BASTARD FILE 6IN
DESC
SP
[email protected]
333336
73-147500 MILL BASTARD FILE 10IN
[email protected]
PRICE
2.73
L.XYX
UOM
EA
A
EA
A
PRICE
6.63
V.OEX
10.24
R.HOX
Planes and Files, Planes, Plane Files
GREAT NECK MILL BASTARD FILE
STANLEY SURFORM FILE
Metal alloy body for long, smooth strokes on flat surfaces. Comfortable
contoured handle. Ribbed section on front of body permits comfortable twohand use of tools. Furnished with regular flat cut blade. Individually carded.
15-3/4" L x 1-5/8" W.
ITEM #
317276
32
DESC
21-295 FLAT FILE-REGULAR CUT BLADE
SP
[email protected]
UOM
EA
A
PRICE
12.88
Y.ACX
Sheffield Mill Bastard File. Rectangular shape. Steel alloy for strength and
durability. Comfortable ergonomic grip rubber handle.
ITEM #
329487
58913 MILL BASTARD FILE 6IN
DESC
SP
[email protected]
329517
58911 MILL BASTARD FILE 8IN
[email protected]
329533
58910 MILL BASTARD FILE 10IN
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
EA
A
PRICE
4.90
L.YXZ
6.63
O.YXZ
7.58
V.VYX
www.wallacehardware.com
Hand & Power Tools
Planes and Files, Files, Mill Bastard File
Planes and Files, Files, Multi-Kut File
STANLEY SINGLE-CUT FLAT MILL
BASTARD FILE
SIMONDS BLACK MAXI-SHARP MULTKUT FLAT FILE
Flat file tapered in width and thickness for general material removal. Singlecut mill pattern for light removal of material. Bastard teeth spacing for generalpurpose tool sharpening and material smoothing.
Obtain almost any required finish simply by changing the feed pressure. MultiKut flat files are single-cut coarse tooth files that taper toward the point in
width. Simonds exclusive Multi-Kut design features a diamond pattern "double
chip-braker" allowing for fast stock removal while leaving a smooth finish.
Specially treated with a black oxide coating. Files last longer due to increased
resistance to loading and rust. Without Handle.
ITEM #
446211
446238
446262
DESC
SP UOM PRICE
3.87
L.YVX
4.53
O.VZX
5.90
V.VHX
22-170 FLAT MILL BASTARD FILE - SINGLE CUT [email protected] EA
6IN
A
22-171 FLAT MILL BASTARD FILE - SINGLE CUT [email protected] EA
8IN
A
22-172 FLAT MILL BASTARD FILE -SINGLE CUT [email protected] EA
10IN
A
VERMONT AMERICAN PATTERN FLAT
MILL BASTARD FILE
DESC
60114 FILE MILL BASTARD 6IN
DESC
78-243600 FILE MULTI-KUT 10IN
SP
[email protected]
SP
[email protected]
UOM
CD
A
PRICE
5.21
O.LYX
PRICE
20.13
CO.CYX
10" American pattern, flat file. Leaves smooth finish. Rectangular shape,
tapered point in width.
ITEM #
309761
DESC
07917N FILE FLAT MAGICUT 10IN
SP
[email protected]
Planes and Files, Files, Flat Bastard File
NICHOLSON AMERICAN PATTERN FLAT
BASTARD FILE
UOM
EA
A
PRICE
13.43
CX.CAX
Planes and Files, Files, Round Bastard File
Flat files are used by machinists, machinery builders, repair men and others
who require rapid removal of metal. They are rectangular in cross section and
taper slightly towards point in width. Double cut on both sides, single cut on
both edges. Without Handle.
DESC
UOM
EA
A
NICHOLSON FLAT MAGICUT FILE
Single cut for general purpose use. Without Handle.
ITEM #
341630
ITEM #
397253
ITEM #
306185
21862N FILE BASTARD FLAT 8IN
SP
[email protected]
338818
03566N FLAT BASTARD FILE 8IN
[email protected]
330027
03665N FLAT BASTARD FILE 10IN
[email protected]
338826
03764N FLAT BASTARD FILE 12IN
[email protected]
UOM
CD
A
EA
A
EA
A
EA
A
PRICE
9.10
R.HYX
9.38
H.CHX
11.68
A.ARX
16.02
CL.XOX
GREAT NECK ROUND BASTARD FILE
Sheffield round bastard file. Use on circular openings and concave surfaces.
Steel alloy for strength and durability. Comfortable ergonomic grip rubber
handle.
ITEM #
329495
58914 ROUND BASTARD FILE 6IN
DESC
SP
[email protected]
329509
58912 ROUND BASTARD FILE 8IN
[email protected]
UOM
EA
A
EA
A
PRICE
4.58
L.HLX
5.92
O.ECX
SIMONDS AMERICAN PATTERN FLAT
BASTARD FILE
VERMONT AMERICAN ROUND BASTARD
FILES
Used primarily by machinists, in factories or whenever rapid stock removal is
desired. This double cut file features the exclusive Simonds "Wavy Tooth"
design. It has cut edges and tapers toward the point for detail work. Without
Handle.
American pattern mill file bastard cut. Rectangular shape. Double cut for
circular openings or concave surfaces. Without Handle.
ITEM #
339083
73-232000 FLAT BASTARD FILE 8IN
DESC
SP
[email protected]
339091
73-234000 FILE BASTD FLAT 10IN
[email protected]
www.wallacehardware.com
UOM
EA
A
EA
A
PRICE
11.84
H.REX
14.58
Y.VYX
ITEM #
341665
60124 FILE ROUND BASTARD 6IN
DESC
SP
[email protected]
341673
60126 FILE ROUND BASTARD 8IN
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
CD
A
CD
A
PRICE
5.66
O.EAX
6.91
V.OHX
33
Hand & Power Tools
Planes and Files, Files, Round Bastard File
STANLEY SINGLE-CUT ROUND BASTARD
FILE
Round file tapered in width and thickness for enlarging round holes for cutting
a scalloped edge. Single-cut mill pattern for light removal of material. Bastard
teeth spacing for general purpose tool sharpening and material smoothing.
ITEM #
446289
DESC
SP UOM PRICE
[email protected] EA
3.66
A
L.AOX
22-307 ROUND BASTARD FILE - SINGLE CUT
6IN
Planes and Files, Files, Half Round Bastard
File
NICHOLSON AMERICAN PATTERN HALF
ROUND BASTARD FILES
Rounded on one side. Flat on the other. Used on concave and convex as well
as flat surfaces. Backs of all half round bastard files are double cut. Carded
without handle.
ITEM #
306207
21857N FILE BASTARD H-R 8IN
DESC
SP
[email protected]
306193
21858N FILE BASTARD H-R 10IN
[email protected]
UOM
CD
A
CD
A
PRICE
13.27
CX.XCX
16.48
CL.VEX
NICHOLSON ROUND BASTARD FILES
Bastard cut. American pattern. Single cut. Principle use is to file circular
openings or concave surfaces. Files 6" and longer are double cut. Tapered
slightly toward point.
ITEM #
330140
DESC
11904 BASTARD FILE ROUND 8IN
SP
[email protected]
355763
21846NN FILE BASTARD ROUND 6IN
[email protected]
355771
21853 BASTARD FILE ROUND 8IN
[email protected]
306215
21854 FILE BASTARD ROUND 10IN
[email protected]
UOM
EA
A
CD
A
CD
A
CD
A
PRICE
6.94
E.LRX
6.37
V.ACX
7.28
E.ECX
9.05
R.AVX
SIMONDS HALF ROUND NEEDLE FILES
Used by jewelers, die-makers and other fine detail craftsmen. Plastic handles
can be attached to make detail filing more comfortable. Filing becomes safer
by eliminating finger "cramping" and scratches or cuts to fingers due to
slipping. Without Handle.
ITEM #
339105
Planes and Files, Files, Half Round Bastard
File
DESC
SP UOM
[email protected] CD
A
PRICE
5.63
O.OVX
Sheffield 8 inch half round bastard file. Steel alloy for strength and durability.
Comfortable ergonomic grip rubber handle.
34
DESC
58921 HALF ROUND BASTARD FILE 8IN
PRICE
19.75
CO.XVX
Planes and Files, Files, Slim Taper File
ITEM #
446270
DESC
22-306 SLIM TAPER FILE - SINGLE CUT 6IN
SP UOM
[email protected] EA
A
PRICE
2.61
L.XLX
GREAT NECK SLIM TAPER FILE
GREAT NECK HALF ROUND BASTARD
FILE
ITEM #
329541
UOM
EA
A
Triangle-shape file gradually tapered in width and thickness for cutting angles
less than 90 degrees. Single-cut mill pattern for light removal of material.
Bastard teeth spacing for general purpose tool sharpening and material
smoothing.
Constructed of alloy tool steel; precision cut for long
life; includes durable plastic handle.
HHR8C HALF ROUND FILE W/HANDLE 8IN
SP
[email protected]
STANLEY SINGLE-CUT SLIM TAPER FILE
GREAT NECK 8 INCH HALF ROUND FILE
WITH HANDLE
ITEM #
830356
DESC
83-527500 FILE HALF RD 6-1/4IN
SP
[email protected]
UOM
EA
A
PRICE
6.98
V.CXZ
Sheffield 6 inch sxtra slim taper file. Use for sharpening and filing gullets
between saw teeth. Steel alloy for strength and durability. Comfortable
ergonomic grip rubber handle.
ITEM #
329525
DESC
58915 SLIM TAPER FILE 6IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
4.48
L.RZX
www.wallacehardware.com
Hand & Power Tools
Planes and Files, Files, Slim Taper File
Planes and Files, Files, Handy File
NICHOLSON SLIM TAPER FILE
NICHOLSON HANDY FILE
Single cut. Edges set and cut for filing gullets between saw teeth. For filing
hand, rip and wood saws.
8" handy file. American pattern Handy file. One size is single cut for tool
sharpening and smoothing metal surfaces. Reverse side is double-cut for
general filing and rapid stock removal. Rectangular shape. 1 cut edge 1 safe
edge. Length measured exclusive of handle. Carded.
ITEM #
329673
14224M FILE TAPER SLIM 6IN
DESC
SP
[email protected]
315036
14290M FILE TAPER SLIM 8IN
[email protected]
355747
21866N FILE TAPER SLIM 6IN
[email protected]
UOM
EA
A
EA
A
CD
A
PRICE
4.71
O.ERX
7.01
E.OCX
4.68
O.ELX
ITEM #
306223
DESC
06601N FILE HANDY 8IN
SP
[email protected]
UOM
CD
A
PRICE
10.28
H.HEX
Planes and Files, Files, Rasp File
Planes and Files, Files, Extra Slim Taper File
NICHOLSON 4-IN-1 RASP
NICHOLSON X-SLIM TAPER SAW FILES
American pattern slim taper file. Made for filing saws with 60 degree angle
teeth. Triangular shape. Single cut. Edges set and cut for filing gullets between
saw teeth. Tapers slightly towards the point. Carded.
ITEM #
329614
DESC
14599M FILE TAPER X-SLIM 5IN
SP
[email protected]
354724
14665M FILE TAPER X-SLIM 6IN
[email protected]
355739
21873N FILE TAPER X-SLIM 6IN
[email protected]
UOM
EA
A
EA
A
CD
A
PRICE
4.69
O.EZX
5.01
O.HYX
5.31
V.XZZ
8" long. American pattern rasp, 4-in-hand, formerly shoe rasp. For the
homeowner, home craftsman, boat builder and mechanic. Half round shape.
Has file selection and rasp section on both flat sides and helf-round side.
Carded. Without Handle.
ITEM #
355755
DESC
SP
[email protected]
21860NN RASP/FILE SHOE 4N1 8IN
UOM
CD
A
PRICE
11.13
A.OYX
UOM
EA
A
PRICE
10.44
R.YRX
GOLDBLATT POCKET DRYWALL RASP
NICHOLSON XX-SLIM TAPER
American pattern taper file, double extra-slim. Made for filing saws with 60
degree angle teeth. Triangular shape. Single cut. Edges set and cut for filing
gullets between saw teeth. Tapers slightly towards the point. For all fine
smooth saw filing.
ITEM #
329738
15024N FILE TAPER X-SLIM 6IN
DESC
SP
[email protected]
306266
21874N FILE TAPER XX SLIM 6IN
[email protected]
UOM
EA
A
CD
A
PRICE
5.04
O.ALX
5.42
V.XAX
DESC
SP
[email protected]
UOM
CD
A
DESC
www.wallacehardware.com
DESC
60110 RASP/FILE SHOE 8IN
SP
[email protected]
UOM
CD
A
PRICE
8.15
E.LCX
NICHOLSON WOOD RASPS
8" half round wood rasp bastard cut. American pattern wood rasp, half-round,
bastard cut. Used by woodworkers, hobbyist and plumbers. Half-round shape.
Single cut file teeth on edges. For use on wood and soft metals. Boxed.
Single cut for handsaws. Triangular. Without handle.
60136 FILE DBL E X TRA SLIM 7IN
SP
[email protected]
PRICE
5.71
O.RVX
VERMONT AMERICAN XX-SLIM TAPER
FILE
ITEM #
341703
DESC
G05026 DRYWALL POCKET RASP
VERMONT AMERICAN SHOE RASP
ITEM #
341622
Single cut for handsaws. Triangular.
60132 FILE E X TRA SLIM TAPR 6IN
ITEM #
318752
4-IN-1. Half round. Extremly versatile. Has file section and rasp section on both
sides.
VERMONT AMERICAN EXTRA-SLIM
TAPER FILE
ITEM #
341681
Drywall pocket rasp, ergonomic soft-grip design has
unique edge guides for ease of use, smooths cut edges
of drywall for smooth matching edges during hanging.
SP
[email protected]
UOM
CD
A
PRICE
6.50
V.CVX
ITEM #
354732
DESC
19394N RASP WOOD ROUND HALF 8IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
14.34
CX.YEX
35
Hand & Power Tools
Planes and Files, Files, File Handles
Planes and Files, Files, File Handles
NICHOLSON PLASTIC UNIVERSAL SAW
HANDLE
STANLEY BI-MATERIAL FILE HANDLE
Interchangeable file handle. Bi-material handle
reduces vibrations. Ergonomic, slip-resistant design for comfort. Hanger
opening for easy storage. Includes 3 inserts that fit most files.
The Nicholson Universal handle is an adjustable file
handle that requires no inserts and allows the user to
work with a full line of hand files
ITEM #
458171
DESC
SP UOM PRICE
12.77
A
Y.HEX
ITEM #
446300
DESC
SP
[email protected]
22-311 FILE HANDLE BI-MATERIAL 4.5IN
21474U NICHOLSON UNIVERSAL FILE HANDLE [email protected] EA
UOM
EA
A
PRICE
2.44
C.YXZ
Planes and Files, Files, File Sets
NICHOLSON FILE HANDLE - WOODEN
STANLEY 5-PIECE FILE SET
Made from close grain hardwood with nickel-plated
ferrules. Wax finish. Handles have strong metal ferrules.
Ideal for most sharpening and material removal needs.
Round, flat and triangle files for filing flat, round and less than 90-degree
angles. Includes: 1 each: 8 in. mill bastard file, 6 in. round file, 6 in. slim taper
file, 8 in. 4-in-1 file, and 1 interchangeable handle.
ITEM #
306444
108383
306452
108405
108413
DESC
21476N FILE HANDLE WOOD
#0
21485N FILE HANDLE WOOD
#1
21494N FILE HANDLE WOOD
#2
21503N FILE HANDLE WOOD
#3
21511N FILE HANDLE WOOD
#4
INFO
5-1/4" X 1-1/2"""
SP UOM PRICE
[email protected] EA
3.00
A
L.LAX
4-7/8" X 1-5/16""" [email protected] EA
2.46
A
C.ARX
4-1/2" X 1-3/16""" [email protected] EA
2.18
A
C.RZX
3-1/8" X 1-1/16""" [email protected] EA
2.10
A
C.RXZ
3-1/4" X 15/16""" [email protected] EA
1.86
A
C.VCX
NICHOLSON FILE HANDLE AND INSERTS
Interchangeable cushion inserts designed to fit most
popular files. Handle is made of strong high-impact material. Contoured to fit
hand for straight lathe and draw filing. Non-slip textured finish for easier grip.
Carded file handle and 4 inserts. Handle is red plastic.
ITEM #
375926
DESC
21474N FILE HANDLE W/INSERTS
SP
[email protected]
UOM
CD
A
PRICE
3.90
L.YVX
SEYMOUR MIDWEST/LINK FILE HANDLE
Short ferrule. 3-1/2 inches x 13/16 inches (size #00), bore 1/8 inch for chain
saws.
ITEM #
114936
114944
114952
114960
114987
36
DESC
3155900 FILE
HANDLE 00 31/2IN
3156100 FILE
HANDLE 01 31/2IN
3156200 FILE
HANDLE 02 4IN
3156300 FILE
HANDLE 03 41/4IN
3156500 FILE
HANDLE 05 5IN
ITEM #
446394
DESC
SP
[email protected]
22-314 FILE SET 5PC
UOM
ST
A
Planes and Files, Files, Chain Saw Files
OREGON CUTTING CHAIN FILE
Have consistent tooth height to remove metal faster, smoother and in more
quantity than other files. Oregon files have fewer teeth per inch which means
filing won't get trapped and the file literally cleans itself. A special heattreating process provides excellent stay-sharp. Two pack.
ITEM #
312150
23577 CHAIN SAW FILE 5/32IN
DESC
SP
[email protected]
312169
23575 CHAIN SAW FILE 7/32IN
[email protected]
PRICE
5.65
O.AVX
5.65
O.AVX
Two premium Oregon files with handy sharpening guide. Eliminates
guesswork, keeps chain at peak cutting efficiency. Filing guide
inscribed with angle indicates to maintain proper file position.
SP UOM PRICE
[email protected] EA
1.49
A
X.YXZ
3-1/2" X 13/16"" BORE
5/32"""
[email protected] EA
A
1.59
X.YRX
ITEM #
312193
25894 GUIDE FILE W/5/32IN FILE
SP
[email protected]
3-15/16" X 1"" BORE 3/16"""
[email protected] EA
A
[email protected] EA
A
1.59
X.YHX
1.68
C.XOX
312207
25892 GUIDE FILE W/7/32IN FILE
[email protected]
[email protected] EA
A
2.12
C.OXZ
5" X 1-5/16"" BORE 3/8"""
UOM
CD
A
CD
A
OREGON CUTTING CHAIN FILES WITH GUIDE
INFO
3-1/2" X 13/16"" BORE 1/8""
FOR CHAIN SAWS"
4-3/8" X 1-3/64"" BORE
7/32"""
PRICE
18.90
CV.RVX
DESC
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
PRICE
9.19
R.CLX
9.19
R.CAX
www.wallacehardware.com
Hand & Power Tools
Planes and Files, Files, Chain Saw Files
Planes and Files, Files, Sure Sharp Stones
OREGON FILE GUIDE
JMK/IIT CHAINSAW SHARPENING KIT
File guide with 3/16 inch file. Includes: 1 premium round file, clearly marked
guide and file handle, guide holds file and indicates sharpening angles,
eliminates guesswork.
Contains all the tools needed for professional maintenance of
your chain and guide bar, all in a sturdy practical pouch.
ITEM #
459631
DESC
SP
[email protected]
25896 FILE GUIDE WITH 3/16" FILE
UOM
EA
A
PRICE
9.18
R.LVX
NICHOLSON CHAIN SAW FILE
01590 CHAINSAW FILE 6INX1/8IN
DESC
SP
[email protected]
377694
01630 CHAINSAW FILE 6INX5/32IN
[email protected]
377686
01765 CHAINSAW FILE 8INX3/16IN
[email protected]
UOM
CD
A
CD
A
CD
A
PRICE
3.40
L.EHX
3.38
L.EVX
3.38
L.EVX
DESC
SP
[email protected]
333255
02147N CHAINSAW FILE 8INX1/4IN
[email protected]
UOM
EA
A
EA
A
UOM
EA
A
PRICE
13.56
H.YAX
Metal. Retractable blade knife has button to project and release blades to 3
positions: full, half and one quarter out. Lightweight die cast handle is in two
sections providing blade storage. Furnished with 11-921 heavy duty blades.
Individually carded. Handle length: 6 in.
Round Knurl Cut. American Pattern tooth type. Round double cut file cut for
more aggressive sharpening.
02144N CHAINSAW FILE 6INX1/8IN
SP
[email protected]
STANLEY UTILITY RETRACTABLE KNIFE
ITEM #
302368
NICHOLSON CHAIN SAW FILE
ITEM #
333298
DESC
29510 SHARPENER CHAINSAW
Knives and Replacement Blades, Utility
Knives, Retractable Knives
Round smooth chain saw file is smooth-feeling and fast cutting. For
sharpening round hooded type teeth. Carded without handles.
ITEM #
377708
ITEM #
010480
DESC
SP UOM PRICE
3.92
L.YVX
10-099 RETRACTABLE UTILITY KNIFE-CLASSIC [email protected] EA
99
A
PRICE
1.16
X.AYX
1.45
C.CXZ
STANLEY UTILITY RETRACTABLE KNIFE
NICHOLSON 3-PACK CHAIN SAW FILE
American pattern round chainsaw file. Knurl cut, more aggresive sharpening. 3
pack.
ITEM #
141097
02229B CHAINSAW FILE 8X3/16IN 3PK
DESC
SP
[email protected]
141089
02228B CHAINSAW FILE 8X5/32IN 3PK
[email protected]
141100
02230B CHAINSAW FILE 8X7/32IN 3PK
[email protected]
UOM
PG
A
PG
A
PG
A
PRICE
3.58
L.RYX
3.60
L.HXZ
3.58
L.RYX
Metal. Quick Change. Front loading with retractable blade and automatic
blade storage magazine. Three blade positions. Furnished with 11-921 heavy
duty blades. Individually carded. Handle length: 6".
ITEM #
353930
264180
DESC
10-499 RETRACTABLE UTIL KNIFE QUICK
CHANGE 6-3/8
10-499-1 SLIDE BUTTON REPLACE (A3443301)
SP UOM PRICE
[email protected] EA
6.17
A
V.RVX
[email protected] EA
2.81
A
L.CZX
Planes and Files, Files, Sure Sharp Stones
OREGON REPLACEMENT STONES
Electric Sure Sharp Replacement Stones. Heavy-duty,
long-life stones. Packed in convenient thru-pack.
Important accessory for the Electric Sure Sharp.
DESC
STANLEY UTILITY RETRACTABLE KNIFE
ITEM #
312258
28840 STONES SURE SHARP 5/32IN
SP
[email protected]
312266
28841 STONE SURE SHARP 7/32IN
[email protected]
www.wallacehardware.com
UOM
EA
A
EA
A
PRICE
7.65
E.CAX
7.65
E.COX
Metal. Interlocking nose prevents nose spread. Three position retractable
blade. Furnished with 3 each #11-921 heavy duty blades. Individually carded.
ITEM #
385549
DESC
SP
UOM PRICE
5.91
A
V.VZX
10-079 RETRACTABLE UTILITY KNIFE 5-7/8IN [email protected] EA
1-800-776-0976 NOVEMBER
2016
37
Hand & Power Tools
Knives and Replacement Blades, Utility
Knives, Retractable Knives
STANLEY UTILITY RETRACTABLE KNIFE
WITH HIGH VISIBILITY
STANLEY UTILITY RETRACTABLE KNIFE
Metal. High visibility fluorescent orange and green color makes it easy to find
in tool box, cabinet, or pouch. Interlock nose design secures blade safely
between knife halves, even in the most demanding applications. Contoured
handle with diagonal ribs for a positive, non-slip grip. Furnished with three 11921 Heavy Duty utility blades.
ITEM #
486124
DESC
10-179 RETRACTABLE UTIL KNIFE -HIGH VIS 57/8IN
SP UOM PRICE
[email protected] CD 5.26
A
O.YRX
STANLEY SELF-RETRACTING UTILITY
KNIFE
Great for opening cartons. Spring loaded design automatically retracts blade.
ITEM #
457973
Knives and Replacement Blades, Utility
Knives, Retractable Knives
DESC
SP UOM PRICE
[email protected] EA
7.49
A
E.HLX
10-189C SELF-RETRACTING SAFETY BLD
UTILITY KNIFE
Strong, durable construction combines a cast metal
core with bi-material soft panels for a sure grip. Blade changes with the push
of a button, no tools required. Curved handle design for comfort, control and
balance. Swing-out blade storage for easy blade access. Integrated string
cutter and retractable slide. Large hang hole for pegboard storage.
ITEM #
350427
SP UOM
[email protected] EA
A
Blade wiper removes excess dirt and protects knife. Blade clamp eliminates
blade wobble, gives more control. Ergonomic design for ease of use. Soft
touch panels/grips allow better control, less slips. Pop-up blade dispenser for
easier access and faster changeover. Supplied with FatMax blades. Push
button blade change-no tools needed.
DESC
SP
DESC
SP UOM PRICE
[email protected] EA
8.68
A
R.EZX
10-989 SWIVEL LOCK KNIFE RETRACTABLE
UTILITY 7IN
STANLEY UTILITY RETRACTABLE KNIFE DYNAGRIP
Metal. Contractor Grade. Cushion grip surface for comfort. Non-slip grip even
with gloved hands. Patented Interlock nose to secure blade. Resistance to
slipping even on angled surface. Additional comfort in extreme temperatures.
ITEM #
486132
DESC
10-779 RETRACTABLE UTIL KNIFE - DYNAGRIP
5-3/8IN
UOM PRICE
11.86
A
Y.XZZ
10-778 RETRACTABLE UTILITY KNIFE 6-5/8IN [email protected] EA
Aluminum. Contractor Grade swivel lock. Body handle
swivels open for quick easy blade change. Interlocking nose for maximum
durability. 3 blades in handle. Carded. 7" length. Contractor Grade Swivel Lock
ITEM #
563919
PRICE
9.92
H.VHX
STANLEY FATMAX RETRACTABLE
UTILITY KNIFE
ITEM #
144274
STANLEY UTILITY RETRACTABLE KNIFE
DESC
10-788 INSTANT CHANGE KNIFE 6-5/8IN
IRWIN STANDARD SAFETY KNIFE
Self-retracting spring action returns blade safely into
the housing when not in use. Interlocking nose reduces blade wobble.
Ergonomic grip fits comfortably in the hand. Two blade positions - 2mm
extension for box cutting and full extension for general use. Tool-free entry.
Includes 1 Irwin Bi-Metal utility blade.
ITEM #
284084
DESC
SP
UOM
2088600 SAFETY KNIFE SELF-RETRACTING [email protected] EA
A
PRICE
8.44
E.HVX
SP UOM PRICE
[email protected] EA
9.13
A
R.YRX
STANLEY QUICKSLIDE UTILITY KNIFE
IRWIN UTILITY RETRACTABLE KNIFE
Ideal for cutting string, nylon and rope. Great for multipurpose cutting, camping and outdoor activities. Spine lock button for ease
and security. Easy blade change. Interlock nose prevents spreading.
Optimized cutting angle for reduced fatigue. Smooth, three position slide
exposes variable blade lengths. Features inside storage for up to 5 blades.
Includes 6 Irwin Blue Blade Bi-Metal utility blades.
ITEM #
002801
ITEM #
284386
38
DESC
10-813 QUICKSLIDE SPORT UTILITY KNIFE
SP UOM
[email protected] EA
A
PRICE
20.77
CE.HVX
DESC
2082101 RETRACTABLE UTILITY KNIFE
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
5.36
O.EHX
www.wallacehardware.com
Hand & Power Tools
Knives and Replacement Blades, Utility
Knives, Retractable Knives
IRWIN UTILITY RETRACTABLE KNIFE
Pro Touch. Quick change mechanism allows for easy blade removal without
opening the knife. Smooth, three position slide provides increased durability
for frequent use. Easy tool-free entry with push button operation opens the
knife and exposes replacement blades. Features inside storage for up to 5
blades. Includes 6 Irwin Blue Blade Bi-metal utility blades.
ITEM #
284351
DESC
SP
[email protected]
1774106 RETRACTABLE UTILITY KNIFE
UOM
EA
A
PRICE
16.16
CX.HZX
Knives and Replacement Blades, Utility
Knives, Retractable Knives
SHEFFIELD DIE CAST ZINC
RETRACTABLE UTILITY KNIFE
Retractable blade. Heavy die cast zinc handle. Blade locks in 9 positions. 2
extra blades in casing. Made in USA.
ITEM #
106763
12242 UTILITY KNIFE DIE CAST ZINC
DESC
SP
[email protected]
106879
12243 UTILITY KNIFE COMFORT GRIP
[email protected]
UOM
EA
A
EA
A
PRICE
5.75
O.VCX
3.98
L.OEX
IRWIN HI-VIS RETRACTABLE UTILITY
KNIFE
SHEFFIELD SELF RETRACTING UTILITY
KNIFE
High-visibility orange color makes for easy spotting on the job site. Smooth,
three-position slide exposes variable blade lengths. Screw permanently
captured in casing to prevent loss. Features inside storage for up to 5 blades.
Includes three unbreakable Blades.
Sheffield Self Retracting Utility Knife. Spring loaded safety blade automatically
retracts. Does not lock in the open position. Heavy duty metal case. 3 blades
stores in handle. Accepts all standard utility blades.
ITEM #
529982
DESC
2082300 HI VIS RETRACTABLE UTIL KNIFE
SP UOM
[email protected] CD
A
PRICE
7.17
V.HCX
ITEM #
106720
12233 UTILITY KNIFE SELF RETRACTABLE
DESC
335525
42070 KNIFEUTILITY-TOP SLIDE
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
3.55
L.CXZ
6.92
E.OXZ
GREAT NECK UTILITY RETRACTABLE
KNIFE
WISS UTILITY RETRACTABLE KNIFE
Professional Utility Knife Made of cast zinc. Accepts standard utility blades.
Storage for extra blades in housing. Blade locks in 9 positions. Hang hole for
storage. Carded.
Retractable utility knife with 11 positions. Quick change
blade release and reload. Magazine blade storage
holds 3 blades, not included. Comfort grip for ease of use and slip protection.
Safety string cutter with recessed blade.
ITEM #
562564
K15C UTILITY RETRACTABLE KNIFE
DESC
SP
[email protected]
162191
K15PC RETRACTABLE KNIFE HI-VISIBLE
[email protected]
UOM
CD
A
EA
A
PRICE
6.61
O.YLX
3.18
C.AEX
SHEFFIELD PLASTIC UTILITY KNIFE
Sheffield Plastic Utility Knife. Retractable blade. High
impact plastic handle. Blade locks in 9 positions. 2 extra blades in casing.
Made in USA.
ITEM #
106887
12244 UTILITY KNIFE HVY DUTY PLASTIC
DESC
SP
[email protected]
106895
12245 MINI UTILITY KNIFE
[email protected]
www.wallacehardware.com
UOM
EA
A
EA
A
PRICE
3.33
C.YRX
2.28
C.OEX
ITEM #
210218
345431
DESC
WK500V UTILITY KNIFE QUICK CHANGE
COMP-GRIP
66-0330 UTILITY KNIFE - RETRACTABLE
W/BLADES
SP UOM PRICE
[email protected] EA
11.06
A
A.ORX
[email protected] CD 3.80
A
L.YLX
HOWARD BERGER RETRACTABLE
UTILITY KNIFE
Heavy-duty. Solid cast metal. Professional. Safety orange.
ITEM #
236519
310433
DESC
SP
UOM PRICE
4.69
L.AXZ
22.60
A
CE.CEX
79005 UTILITY KNIFE RETRACTABLE H-D
[email protected] CD
ORANGE
A
20353SSRK1 RETRACTABLE KNIFE W/BLADES [email protected] EA
1-800-776-0976 NOVEMBER
2016
39
Hand & Power Tools
Knives and Replacement Blades, Utility
Knives, Retractable Knives
Knives and Replacement Blades, Utility
Knives, Fixed Blade Knives
WISS AUTO-RETRACTING UTILITY KNIFE
STANLEY UTILITY FIXED BLADE KNIFE
Blade retracts automatically the moment it loses
contact with the material being cut, even when the user
is still holding the blade slider forward in the open
position.
Swivel-Lock. Exclusive interlocking front end.
Ergonomically designed. Aluminum die cast.
ITEM #
361461
588962
DESC
ITEM #
340448
SP UOM PRICE
[email protected] EA
9.79
A
H.OZX
[email protected] EA
3.12
A
L.OHX
WKAR1 UTILITY KNIFE AUTO RETRACTABLE
10-175 UTILITY KNIFE HOMEOWNERS
RETRACTABLE
DESC
SP UOM PRICE
[email protected] EA
5.82
A
V.OYX
10-399 FIXED BLADE KNIFE 6IN HANDLE
SWIVEL LOCK
STANLEY FATMAX FIXED BLADE UTILITY
KNIFE
Ergonomic design for ease of use. Soft touch panels/grips allow better control,
less slips. Blade clamp eliminates blade wobble, gives more control. Pop-up
blade dispenser for easier access and faster changeover. Cartridge holds up
to 5 blades. Supplied with FatMax blades. Dual blade position in nose
increases versatility.
STANLEY QUICKSLIDE KNIFE
The STANLEY STHT10828 QuickSlide Knife features a
renovated design that is slimmer and more compact
than the previous model. This new design includes a
carabineer and bottle opener. It allows for easy blade
change and slide operation for quick and easy loading
with its simple, die-cast design. Includes 1 blade.
ITEM #
292277
*
NEW
DESC
STHT10828 QUICKSLIDE KNIFE
ITEM #
144398
SP
[email protected]
UOM
EA
A
DESC
SP
[email protected]
10-780 UTILITY KNIFE FIXED BLADE
UOM
EA
A
PRICE
10.24
H.RAX
PRICE
6.29
V.AZX
IRWIN UTILITY FIXED BLADE KNIFE
Knives and Replacement Blades, Utility
Knives, Fixed Blade Knives
Optimized cutting angle for reduced fatigue. Features inside storage for up to
5 blades. Includes 3 Irwin Blue Blade Bi-metal utility blades.
ITEM #
284378
DESC
2081101 FIXED UTILITY KNIFE
SP
[email protected]
UOM
EA
A
PRICE
5.11
O.VCX
STANLEY UTILITY FIXED BLADE KNIFE
Contractor Grade. Extra heavy duty knife die-cast in two sections?provides
blade storage. Has bright aluminum finish; handy hang hole. Furnished with 11921 heavy duty blades and blade guard. Handle length: 5-1/2".
ITEM #
302376
DESC
10-209 FIXED BLADE 199 UTILITY KNIFECLASSIC
SP UOM PRICE
[email protected] EA
4.77
A
O.RXZ
IRWIN UTILITY FIXED BLADE KNIFE
PRO TOUCH ergonomic grip. Optimized cutting angle for reduced fatigue.
Easy tool-free entry. Features inside storage for up to 5 blades. Includes 6
Irwin Blue Blade Bi-Metal utility blades.
ITEM #
284343
DESC
1774103 FIXED UTILITY KNIFE
SP
[email protected]
UOM
EA
A
PRICE
13.05
A.AHX
STANLEY UTILITY FIXED BLADE KNIFE
Lightweight handle in two sections providing blade storage. Gray enamel
finish. Furnished with 3 each No. 11-911 light duty blades. Individually carded.
Handle length: 5-1/2".
ITEM #
302384
40
DESC
10-299 FIXED BLADE INTERLOCK UTILITY
KNIFE
SP UOM PRICE
[email protected] EA
2.85
A
L.CVX
SHEFFIELD FIXED BLADE UTILITY KNIFE
Sheffield Fixed Blade Utility Knife. Fixed blade for more
cutting power. Heavy duty die cast handle. Accepts standard utility blades.
Includes 1 blade.
ITEM #
125733
DESC
12262 FIXED BLADE UTILITY KNIFE
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
3.18
C.AZX
www.wallacehardware.com
Hand & Power Tools
Knives and Replacement Blades, Utility
Knives, Fixed Blade Knives
Knives and Replacement Blades, Utility
Knives, Folding Lockback Knives
HYDE UTILITY FIXED BLADE KNIFE
SHEFFIELD LOCK BACK UTILITY KNIFE
Angle Offset head for increased leverage. Die cast
aluminum alloy construction. Pivots open for blade storage. 1 heavy blade
included.
One-hand opening, blue. This innovative and useful tool combines the best
features of a lockback knife with a utility knife. Features a sturdy aluminum
handle, fold out blade housing. The blade is changed easily using patented
snap lock and sliding mechanism. Uses standard utility blades.
ITEM #
326933
DESC
SP
[email protected]
42080 KNIFE UTILITY ANGLE HEAD
UOM
EA
A
PRICE
9.99
H.RHX
Knives and Replacement Blades, Utility
Knives, Folding Lockback Knives
IRWIN FOLDING LOCKBACK UTILITY
KNIFE
DESC
12113 LOCK BACK UTILITY KNIFE
SP
[email protected]
UOM
EA
A
PRICE
16.54
Y.HOX
AMERICAN SAFETY RAZOR FOLDING UTILITY
KNIFE
Folds to pocket size. Quick and easy blade change. Comes with 6
blades and a blade guard dispenser.
Folding lockback features quick change button, wire
stripper notch, wide thumb ledge, integral belt clip and
rugged industrial design. Includes 1 Irwin blue blade.
ITEM #
117250
ITEM #
103179
DESC
ITEM #
322547
SP
DESC
65-0203 FOLDING UTILITY KNIFE
SP
[email protected]
UOM
CD
A
PRICE
7.61
E.HLX
SP
[email protected]
UOM
CD
A
PRICE
8.59
E.XRX
SP
[email protected]
UOM
EA
A
PRICE
10.49
R.XVX
UOM PRICE
15.76
A
CX.ECX
2089100 UTILITY KNIFE LOCKBACK FOLDING [email protected] EA
HOWARD BERGER FOLDING UTILITY KNIFE
Includes 5 replacement blades. Folds to fit in pocket.
SHEFFIELD ELLIPTIC FOLDING
LOCKBACK UTILITY KNIFE
ITEM #
236527
Sheffield Elliptic Folding Lockback Utility Knife. Oval
shaped handle for comfort. Manufactured of anodized
aluminum for lightweight strength. Handle trimmed
with hardwood. Replaceable utility knife blade.
ITEM #
237450
DESC
58132 FOLDING LOCKBACK UTILITY KNIFE
ELLIPTIC
SP UOM PRICE
[email protected] EA
10.13
A
E.AVX
OLYMPIA TURBO KNIFE
Smooth annodized aluminum red body. Fixed blade in
sliding carriage. Belt clip. Locks in open or closed
position. Includes 5 blades.
ITEM #
121290
SHEFFIELD QUICK CHANGE LOCK BACK
UTILITY KNIFE
Sheffield Quick Change Lock Back Utility Knife with
Blade Storage. Patented folding lockback utility knife holds 5 blades in handle
compartment. Blade changing is easy with no tool required. Heavy duty
construction for contractor use. Convenient belt clip.
ITEM #
267937
DESC
12119 QUICK CHANGE LOCK BACK UTILITY
KNIFE
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
20.13
A
CZ.YRX
DESC
79202 UTILITY KNIFE FOLDING 6IN
DESC
33-132 TURBOKNIFE RED/YELLOW
IRWIN FOLDING UTILITY KNIFE
Patented BladeLock technology keeps blade locked in place. Blade storage
that holds up to two additional blades. Liner lock for quick one-handed
operation. Wire stripper for built-in convenience. 3 blades included.
ITEM #
388149
DESC
1858318 FK100 FOLDING UTILITY KNIFE
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] CD
A
PRICE
15.33
CX.XAX
41
Hand & Power Tools
Knives and Replacement Blades, Utility
Knives, Folding Lockback Knives
IRWIN FOLDING UTILITY KNIFE
Patented BladeLock technology keeps blade locked in place. Blade storage
that holds up to two additional blades. Liner lock for quick one-handed
operation. Wire stripper for built-in convenience. 1 blade included.
ITEM #
388122
DESC
1858319 FK150 FOLDING UTILITY KNIFE
SP UOM
[email protected] CD
A
PRICE
18.19
CZ.YEX
Patented BladeLock technology keeps blade locked in place. Blade storage
that holds up to two additional blades. Liner lock for quick one-handed
operation. Wire stripper for built-in convenience. 3 blades included.
DESC
1858320 FK250 FOLDING UTILITY KNIFE
APEX FOLDING POCKET KNIFE
Titanium coated stainless steel blade. Titanium is 3x
stronger than steel for a longer life. Blade features
piercing tip with serrated and straight cutting edges for
maximum cutting abilities. Full metal frame for
increased durability. Spring assisted opening. Dual
thumb studs and thumb hole for quick, easy opening. Slim, ergonomic handle
designed for maximum comfort. Reversible belt clip.
ITEM #
361522
IRWIN FOLDING UTILITY KNIFE
ITEM #
388130
Knives and Replacement Blades, Utility
Knives, Folding Lockback Knives
SP UOM
[email protected] CD
A
PRICE
21.97
CV.VZX
*
NEW
DESC
SP UOM PRICE
[email protected] EA
18.69
A
CV.CVX
WKFP1 FOLDING POCKET KNIFE
SPRNG ASSTD OPEN
Knives and Replacement Blades, Utility
Knives, Utility Pocket Knives
STANLEY POCKET KNIFE
Chrome plated pocket knife has safety lock feature. Accepts 11-040 or 11-041
steel blades. Individually carded. Overall length: 4-1/4 in.
AMERICAN SAFETY RAZOR FOLDING
UTILITY KNIFE
ITEM #
374547
Folds to pocket size. Quick and easy blade change.
Comes with 6 blades and a blade guard dispenser.
ITEM #
322555
DESC
65-0214 UTILITY KNIFE - AUTOLOAD
SP
[email protected]
UOM
CD
A
PRICE
9.84
H.ECX
Utility knife in gold color is a multi-use tool that
includes built in bottle opener, screwdriver, wire stripper and pipe reamer. It
has secure locking mechanism and easy to open and close. It features
ergonomic rubberized grip for comfort and has a bi-metal blade.
DESC
10771FLK1 LENOX TRADESMAN KNIFE
SP
[email protected]
UOM
EA
A
PRICE
8.67
R.EAX
Knives and Replacement Blades, Snap-Off
Knives, Snap-Off Knives
STANLEY UTILITY SNAP-OFF KNIFE DYNAGRIP
AMERICAN SAW LENOX TRADESMAN
KNIFE
ITEM #
425636
DESC
10-049 POCKET KNIFE
SP
[email protected]
UOM
EA
A
PRICE
19.65
CO.LHX
25mm / 1 in. snap-off blades to help resist snapping and durability. Thumb dial
blade release for easy blade change. Eight segments with eight shape tips.
Rubber DynaGrip panels for secure, comfortable grip. Yellow ABS plastic body.
ITEM #
264199
264202
DESC
SP UOM PRICE
13.76
CX.ECX
6.10
A
V.RVX
10-425 SNAP-OFF KNIFE DYNAGRIP YELLOW [email protected] EA
ABS PLS
A
11-325T HD SUPER QUICK POINT BLADE 10PK [email protected] EA
STANLEY 18MM SNAP-OFF KNIFE
With plastic handle. 4 inch closed and 6.5 inch open length. Quick change
mechanism. Belt clip. Includes (1) one inch blade. Uses any standard utility
blade.
Stainless barrel is rust resistant. Up to 20kg/50 lbs. push back force. Push
button cartridge release stores up to 6 spare blades. Push button blade clamp
reduces blade wobble for more precise cutting control. Bi-material slider.
Blade wiper removes excess debris, to prolong the life of the knife.
Removable blade snapper for faster and safer removal of a worn segment.
Instant blade replacement.
ITEM #
512544
ITEM #
309087
SHEFFIELD FOLDING LOCKBACK
UTILITY KNIFE
42
DESC
9883 SHEFFIELD FOLDING LOCK BACK
KNIFE
SP UOM PRICE
[email protected] EA
10.04
A
E.AZX
DESC
10-481 SNAP OFF KNIFE 18MM FATMAX
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
12.42
Y.VRX
www.wallacehardware.com
Hand & Power Tools
Knives and Replacement Blades, Snap-Off
Knives, Snap-Off Knives
Knives and Replacement Blades, Snap-Off
Knives, Snap-Off Knives
HYDE UTILITY SNAP-OFF KNIVES MAXXGRIP
STANLEY WORKS 18MM RETRACTABLE
POCKET CUTTER
Reversible blades for use in left or right hand. Cut cardboard, foil, paper,
wallcovering, etc. Retractable blades with auto-lock control. Built-in blade
breakers. 3 blades included. Metal with soft grip.
Light-duty, retractable cutter with Quick-Point Snap-Off Blades. Blade sections
snap off providing a fresh, sharp cutting point. Length: 6 in.
ITEM #
773611
DESC
SP
[email protected]
42027 KNIFE SNAP-OFF MX-GP 9MM
UOM
EA
A
PRICE
4.44
O.VHX
HYDE UTILITY SNAP-OFF KNIVES
Blue plastic holder has push button project and retract blade with 12 snap-off
super sharp cutting points. Built into end of handle is a removable holder to
snap off point. Blister packaged card contains 2 extra blades packed under
knife. 10 per box.
ITEM #
382264
DESC
SP
[email protected]
42045 KNIFE UTILITY SNAP-OFF
UOM
EA
A
PRICE
3.95
L.YAX
AMERICAN SAFETY RAZOR STAINLESS
STEEL SNAP-OFF KNIFE
DESC
SP
[email protected]
65-0300 SNAP-OFF KNIFE S S 13 PT
UOM
CD
A
66-0397 SNAP-OFF KNIFE ERGO 8 PT
SP
[email protected]
322369
66-0395 SNAP-OFF KNIFE ERGO 13 PT
[email protected]
SP
UOM PRICE
1.50
A
C.CEX
[email protected] EA
0.87
A
X.RLX
442062
3508 13 PT BREAK AWAY KNIFE
Knives and Replacement Blades, Snap-Off
Knives, Snap-Off Knife Displays
AMERICAN SAFETY RAZOR NEON SNAPOFF 8 PT KNIFE
Autolock slider locks blade instantly for safety and
convenience. Internal blade storage for 2 spare blades.
Tough ABS body with stainless steel track is contoured
to fit the hand. Bucket packed. 25 Per Bucket.
322415
DESC
66-0456 SNAP-OFF KNIFE
NEON 8 PT
66-0455 SNAP-OFF KNIFE 13
PT
INFO
SP UOM PRICE
25 PER BUCKET [email protected] EA
1.05
A
X.AXZ
75 PER BUCKET [email protected] EA
0.67
A
X.ECX
HOWARD BERGER UTILITY SNAP-OFF
KNIFE BUCKET
Autolock slider locks blade instantly for safety and
convenience. Tough ABS body is contoured to fit the hand
with ergonomic handle, stainless steel track and internal
blade storage. Includes 3 blades.
ITEM #
587427
DESC
PRICE
3.44
L.ROX
AMERICAN SAFETY RAZOR SMARTGRIP
ERGO SNAP-OFF KNIFE
DESC
10-143P SNAP-OFF KNIFE QUICK POINT 18MM [email protected] EA
ITEM #
322466
Durable stainless steel body and blade. Safety cap covers blade when stored.
Cap can be used to snap off blade segments. Pocket clip provides convenient
pocket storage. Textured slide grip.
ITEM #
322598
ITEM #
446041
Large plastic handle. Plastic wrapped and bar-coded
for individual sale. Large knife with 7 snap-off points.
UOM
CD
A
CD
A
PRICE
3.94
O.XZZ
3.54
L.HXZ
ITEM #
733989
733997
DESC
GK7-25 UTILITY KNIFE
SNAP-OFF BLD BUCKET
25PC
GK13-50 UTILITY KNIFE
SNAP-OFF BLD BUCKET
50PC
INFO
SP UOM PRICE
LARGE KNIFE WITH 7 [email protected] BK
20.95
SNAP-OFF POINTS
A
CL.LAX
SMALL KNIFE WITH [email protected]
13 SNAP-OFF POINTS
BK
A
24.63
CV.VOX
GREAT NECK SNAP BLADE KNIFE
For light duty cutting of paper, vinyl, leather. End of blade snaps off easily to
provide a new cutting edge. Locking slide. Pocket clip.
ITEM #
562572
DESC
SBK SNAP BLADE KNIFE
www.wallacehardware.com
SP
[email protected]
UOM
CD
A
PRICE
1.49
X.AHX
1-800-776-0976 NOVEMBER
2016
43
Hand & Power Tools
Knives and Replacement Blades, Snap-Off
Knives, Hobby Knives
Knives and Replacement Blades, Flooring
Knives, Lineoleum Knives
XCELLITE PRECISION KNIFE SET
IRWIN LINOLEUM KNIFE
2-piece light and medium knife set with 10 asst. blades. Great for
hobbies and art.
Hardwood handle for increased durability. Hooked
blade for cutting on the pull.
ITEM #
530107
ITEM #
228648
DESC
SP
[email protected]
XNS100 KNIFE SET PRECISION
UOM
ST
A
PRICE
15.15
CZ.VAX
Knives and Replacement Blades, Snap-Off
Knives, Carton Cutters
Metal frame construction holds single edge razor
blade. Blade retracts for safety. 1 blade included.
Carded.
DESC
42005 CUTTER CARTON
SP
[email protected]
UOM
CD
A
PRICE
5.71
O.YXZ
Knives and Replacement Blades, Flooring
Knives, Carpet Knives
STANLEY UTILITY TWIN BLADE KNIFE
Stanley Bostitch twin blade knife is ideal for all roofing,
flooring and general contracting applications. Allows users to alternate
between two blades without carrying more than one knife. It has interlocking
blade sliders to ensure that only one blade is extended at a time. Comes
complete with two hook blades. Holds up to nine blades.
HYDE CARTON CUTTER
ITEM #
218944
DESC
1774108 LINOLEUM KNIFE
SP
[email protected]
UOM
EA
A
PRICE
1.82
C.VXZ
ITEM #
237817
DESC
SP UOM PRICE
[email protected] EA
12.59
A
Y.ELX
10-501 UTILITY TWIN BLADE KNIFE W/ 2 HK
BLDS
Knives and Replacement Blades, Flooring
Knives, Lineoleum Knives
HYDE VINYL KNIVES
STANLEY CARPET KNIVES
Heavy 2-1/2" long point swedged blade. Finest high
carbon steel. Hardwood handle. Individually packaged.
ITEM #
382248
DESC
20450 KNIFE LINOLEUM 2-1/2 IN
SP
[email protected]
UOM
EA
A
PRICE
8.05
R.XEX
Contractor Grade. Angular designed handle. Retractable double edge blade.
11-525 blades stored in handle. Individually carded. Overall length: 6-1/2"
Metal.
ITEM #
328413
DESC
SP UOM PRICE
8.66
A
R.ECX
10-525 RETRACTABLE CARPET KNIFE 6-1/2IN [email protected] EA
HYDE LINOLEUM KNIVES
Blades are finest chrome vanadium cutlery steel, hardened, tempered and
honed. Individually carded. Blade is 2-1/2 in. long.
ITEM #
382221
DESC
20250 KNIFE FLOORING 2-1/2 IN
SP
[email protected]
UOM
EA
A
PRICE
6.28
V.ACX
HYDE DRYWALL KNIFE
Cuts floor covering and drywall material. Long Point. High carbon cutlery steel
blades; hardened, tempered and honed. Hardwood handles with choice of
finish.
ITEM #
335517
44
DESC
20350 KNIFE FLOORING 2-1/2 IN
SP
[email protected]
UOM
EA
A
PRICE
7.37
E.REX
IRWIN CARPET KNIFE
Ideal for cutting and installing carpet. The knife handle
has a 19 Degree angle built in to allow for an optimum cutting angle with out
over extending the wrist. The new Irwin carpet utility knife features a 1/2 turn
thumb screw that allows for tool-free access to blades and for blade changes.
It features a trigger grip for cutting on the pull and the will store up to 10
blades. The knife comes with the Irwin double sided carpet blade.
ITEM #
530042
DESC
1774107 CARPET KNIFE
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
11.34
H.HEX
www.wallacehardware.com
Hand & Power Tools
Knives and Replacement Blades,
Replacement Blades, Utility Knife Blades
Knives and Replacement Blades,
Replacement Blades, Utility Knife Blades
STANLEY MITEY KNIFE BLADES
STANLEY CARBIDE UTILITY KNIFE
BLADES
For use with Mitey-knife #10-039. Three blades per
card. 1-1/8".
ITEM #
368164
DESC
SP
[email protected]
11-031 MITEY KNIFE BLADE 3/CD
UOM
CD
A
PRICE
2.29
C.HOX
Designed to deliver increased blade life, maintain firstcut sharpness, and offer snap resistance. High power laser technology is used
to deposit tungsten carbide powder on to the edge of every blade; diamond
wheels then grind a sharp finished angle to create a durable and long lasting
edge while maintaining a flexible steel blade body. 5 pk.
ITEM #
329983
DESC
SP
[email protected]
11-800R CARBIDE UTILITY BLADE 5PK
STANLEY UTILITY KNIFE BLADES
Pointed razor type knife blade made of tough carbon
steel. Regular duty blade fits Stanley 10-199, 10-299, 10-599 knives. #11-921
heavy duty, blade also fits Stanley 10-499 knife. #11-931 for use in 10-199 knife.
Five blades per card. Regular.
ITEM #
302406
302414
DESC
INFO
SP
UOM PRICE
1.30
X.YAX
0.86
X.RVX
11-911 BLADES 1991 5/CD
REGULAR
[email protected] CD
REGULAR DUTY UTILITY
A
11-921 UTILITY BLADES 1992 HVY HEAVY-DUTY [email protected] CD
DUTY 5/CD
A
STANLEY UTILITY KNIFE BLADES
UOM
EA
A
PRICE
4.24
O.LCX
AMERICAN SAFETY RAZOR UTILITY
KNIFE BLADES
2-Notch utility blades. .025" heavy gauge high carbon knife steel for rugged
use. Rounded corners for safety. Fits all standard utility knives. 5 pack carded.
ITEM #
345458
DESC
SP UOM PRICE
[email protected] CD 0.86
A
X.REX
66-0341 UTILITY BLADES - REFILL HEAVY
DUTY
HYDE UTILITY KNIFE BLADES
Pointed razor type knife blade made of tough carbon
steel. Regular duty blade fits Stanley knives 10-199, 10-299, 10-599. Also fits
Stanley 11-921 heavy duty knife. 400 blades per box.
Best grade steel, super sharp to fit utility knives. Blades heavy duty .025"
thick, 2-1/2" wide. 5 blades per card and 10 cards per box.
ITEM #
577227
ITEM #
382280
DESC
11-921B UTILITY BLADES 1992 HEAVY DUTY
400CT
SP UOM PRICE
[email protected] BX
53.50
A
VX.LOX
SP
[email protected]
UOM
CD
A
PRICE
1.62
C.LOX
IRWIN UTILITY BI-METAL KNIFE BLADES
STANLEY FATMAX BLADE
Features patented Bi-Metal technology. Blue blades.
Sharp, strong and long lasting.
DESC
DESC
42100 BLADES KNIFE UTILITY
ITEM #
213888
11-700 FATMAX BLADE 5PK
SP
[email protected]
213896
11-700L FATMAX BLADE 50PK
[email protected]
UOM
PG
A
PG
A
PRICE
1.70
C.LHX
11.85
A.YVX
ITEM #
284394
2084100 UTILITY BLADES BI-METAL 5PK
DESC
284408
2084200 UTILITY BLADES BI-METAL 20PK
284416
2084400 UTILITY BLADE BI-METAL 100PK
SP UOM
[email protected] PG
A
[email protected] PG
A
[email protected] PG
A
PRICE
2.15
C.VOX
8.65
E.HEX
32.38
LC.EYX
STANLEY UTILITY KNIFE BLADES
LENOX UTILITY BI-METAL KNIFE BLADES
Contractor Grade. Extra heavy duty utility blade for
cutting thick, dense sheet materials. For use with fixed blade knives only. Fits
knife #10-209. 5 per card.
Shatter resistant - Safer than carbon blades. Up to 3X
the life of Carbon Steel Blades. Fits standard utility knives. Great for Drywall,
Metal Scoring and all regular uses.
ITEM #
575100
ITEM #
391565
DESC
SP
UOM PRICE
1.28
A
X.YHX
11-931 UTILITY BLADES (1991) EXTRA HD 5/CD [email protected] CD
www.wallacehardware.com
DESC
20350-GOLD5C BI-METAL BLADE 5PK
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
PG
A
PRICE
3.73
L.VHX
45
Hand & Power Tools
Knives and Replacement Blades,
Replacement Blades, Utility Knife Blades
Knives and Replacement Blades,
Replacement Blades, Utility Knife Blades
SHEFFIELD MIDGET UTILITY KNIFE
BLADES
STANLEY 3 PACK DRYWALL UTILITY
BLADES
Sheffield Midget Utility Knife Blades. 5 Pack. Finest cutlery steel. Fits Sheffield
mini utility knives 12116, 12125 and 12121.
Cuts and scores drywall, ceiling tile, wallboard and
similar materials. Length: 2-7/16 in.
ITEM #
107026
DESC
12851 MINI BLADES 5/CD
SP
[email protected]
UOM
CD
A
PRICE
1.71
C.XLX
ITEM #
445835
DESC
SP
UOM
PRICE
1.58
C.LOX
11-937 UTILITY BLADES DRYWALL ASB 3PK [email protected] PG
A
GREAT NECK PROFESSIONAL UTILITY BLADES
5 Blades - .025 Steel. Industrial Quality. Made In U.S.A.
IRWIN BI-METAL SAFETY KNIFE BLADES
5 per pack.
ITEM #
256323
DESC
11P UTILITY KNIFE BLADES 5PK
SP
[email protected]
UOM
EA
A
PRICE
1.69
C.XLX
ITEM #
530018
DESC
2088100 BI-METAL SAFETY BLADES - 5CT
SHEFFIELD UTILITY KNIFE BLADES
SP UOM
[email protected] CD
A
PRICE
2.39
C.RXZ
Sheffield Utility Knife Blades. 5 Pack. Finest cutlery
steel. Fits all standard utility knives.
ITEM #
125563
DESC
SP
[email protected]
12850 UTILITY KNIFE BLADES 5PC
UOM
CD
A
PRICE
1.71
C.XZZ
Knives and Replacement Blades,
Replacement Blades, Hook Blades
IRWIN BI-METAL UTILITY BLADES
STANLEY UTILITY KNIFE HOOK BLADES
Welded bi-metal for sharp edge and flexible body. Stay
sharper 3X longer than traditional carbon blades.
Both ends of blade are razor sharp to cut full thickness
on one stroke. Fits most utility knives to cut linoleum, roofing material,
cartons, etc., without damage. Five blades per card.
ITEM #
388114
DESC
SP UOM PRICE
[email protected] CD 19.80
A
CO.XCX
2084300 UTILITY KNIFE BLADE BI-METAL
50PK
IRWIN 4-POINT CARBON BLADES
1764983 CARBON BLADES 4 POINT 5PK
388106
1764985 CARBON BLADES 4 POINT 50PK
46
DESC
DESC
11-961 BLADES 1996 HOOK 5
SP
[email protected]
UOM
CD
A
PRICE
4.05
O.XEX
STANLEY UTILITY KNIFE HOOK BLADES
Snaps on the score for sharp tip. Four notches for full
blade extension. Twice the life of traditional carbon
blades.
ITEM #
388092
ITEM #
302422
Large hook blade. Similar to 11-961, but with deeper
hook for cutting thicker materials. 5 per card.
SP UOM
[email protected] CD
A
[email protected] CD
A
PRICE
1.86
C.LVX
16.81
CZ.XEX
ITEM #
486140
DESC
11-983 HOOK BLADES LARGE 5PK
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
4.23
O.CYX
www.wallacehardware.com
Hand & Power Tools
Knives and Replacement Blades,
Replacement Blades, Hook Blades
Knives and Replacement Blades,
Replacement Blades, Hook Blades
STANLEY REPLACEMENT UTILITY
BLADES
STANLEY 3 PACK ROOFING UTILITY
BLADES
50 pack, carbon steel hook replacement blades. Edge protection blade for
cutting and trimming roofing materials, linoleum, carpet fabric, cartons, and
sheet materials. Blade shape helps prevent damage to whatever is beneath
material being cut. Fits most standard utility knives. Deep hook for cutting
thicker material.
Cuts shingles, felt paper and similar materials. Length
1-7/8 in.
ITEM #
381314
DESC
ITEM #
445843
DESC
SP
UOM
11-939 UTILITY BLADES ROOFING ASB 3PK [email protected] PG
A
SP UOM PRICE
[email protected] PG
26.70
A
CY.YOX
FMHT11146L HOOK UTILITY BLADE 1.875IN
STEEL 50PK
PRICE
5.50
V.LRX
IRWIN HOOK BLADES
5 per pack.
AMERICAN SAFETY RAZOR UTILITY
KNIFE HOOK BLADES
.025" deep hook blades. Carbon steel. Used to cut carpeting and linoleum
without damage to surfaces beneath. Can be used in all standard utility
knives.
ITEM #
361496
61-0142 DEEP HOOK BLADES
DESC
SP
[email protected]
322628
61-0100 UTILITY BLADE - DEEPHOOK
[email protected]
UOM
CD
A
BX
A
PRICE
3.83
L.YLX
39.37
OX.XOX
Best grade steel, super sharp to fit utility knives. Blades
heavy duty .025 inch, 64mm thick, 2-1/2 inch, 64mm wide. 5 hook blades per
card.
DESC
42200 BLADES KNIFE UTILITY
SP
[email protected]
UOM
PG
A
PRICE
2.66
L.XZZ
DESC
SP
[email protected]
530034
2087102 HOOK BLADES 100CT
[email protected]
UOM
CD
A
CD
A
PRICE
2.88
C.AYX
36.70
LE.XAX
Knives and Replacement Blades,
Replacement Blades, Pocket Knife Blades
Replacement blades for #10-049 pocket knife. Cutlery stainless steel
sheepfoot blade designed for heavy cutting and carving. Individually blister
packed. 2-1/2".
ITEM #
334979
DESC
11-040 SHEEPFOOT BLADE
SP
[email protected]
UOM
CD
A
PRICE
3.09
L.OZX
STANLEY UTILITY / POCKET KNIFE
BLADES
SHEFFIELD HOOK UTILITY KNIFE
BLADES
Sheffield hook utility knife blades. 5 Pack. Finest cutlery steel. Fits all standard
utility knives.
ITEM #
107077
DESC
12852 HOOK UTILITY KNIFE BLADES 5/CD
256331
UHK5 UTILITY HOOK BLADE
www.wallacehardware.com
2087100 HOOK BLADES 5CT T
STANLEY UTILITY / POCKET KNIFE
BLADES
HYDE UTILITY KNIFE HOOK BLADES
ITEM #
368318
ITEM #
530026
SP UOM
[email protected] CD
A
1[email protected] EA
A
PRICE
2.69
C.EHX
4.65
L.HRX
Replacement blades for #10-049 pocket knife. The utility blade is made from
cutlery stainless steel. It's designed for doing most any job well. Individually
carded. 2-1/2".
ITEM #
374563
DESC
11-041 UTILITY BLADE FOR 10-049 KNIFE
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
3.25
L.VEX
47
Hand & Power Tools
Knives and Replacement Blades,
Replacement Blades, Carpet Knife Blades
Knives and Replacement Blades,
Replacement Blades, Snap-Off Knife Blades
STANLEY CARPET KNIFE BLADES
AMERICAN SAFETY RAZOR SNAP-OFF
KNIFE BLADE REFILL
High carbon steel blade has double cutting edge.
Designed with single slot to fit Stanley 10-515 carpet knife. Five blades per
card. Blade length is 2-1/4".
ITEM #
336394
DESC
SP
[email protected]
11-525 CARPET KNIFE BLADES 5/CARD
UOM
CD
A
PRICE
1.87
C.VCX
SP UOM
[email protected] CD
A
PRICE
2.89
L.CHX
8 cutting points per blade. Fits standard 18mm snap-off utility knives. Made
from finest cutlery steel. 5 per card. 10 - 9mm Wide Blades.13 Snaps Per Blade.
ITEM #
361569
DESC
66-0372 REFILL SNAPOFF BLADES
INFO
SP UOM PRICE
10 - 9MM
[email protected] CD 2.20
WIDEBLADES\LINE1
A
C.RHX
3 SNAPS PER BLADE
AMERICAN SAFETY RAZOR CARPET
SLITTER BLADES
.017" square corner double edge blades. 10 per pack.
ITEM #
322636
DESC
61-0138 EACH CARPET BLADE SLITR D-E
High carbon steel. Fits all standard breakaway or snap-off 13 point,
9mm knives. 5 blades.
IRWIN CARPET KNIFE BLADES
Two cutting edges. Fits most carpet knives. 5 blade
pack. Durable carbon steel construction.
ITEM #
530115
DESC
1777341 CARPET BLADES 5CT
AMERICAN SAFETY RAZOR SNAP-OFF KNIFE
BLADE REFILL
SP
[email protected]
UOM
CD
A
PRICE
2.86
C.YRX
ITEM #
361585
DESC
66-0378 REFILL SNAP-OFF BLADES
SP
[email protected]
UOM
CD
A
PRICE
1.62
C.LVX
Knives and Replacement Blades,
Replacement Blades, Snap-Off Knife Blades
HYDE UTILITY SNAP-OFF KNIVES
BLADES
STANLEY UTILITY SNAP-OFF KNIFE
BLADES
Several sharp cutting points per blade fits into Stanley Quick point snap off
knives. Three blades per card. 3-1/2 in. blade length.
ITEM #
588989
095133
DESC
11-300 BLADES 9MM QUICK POINT 3/CARD
11-301 SNAP OFF BLADES QUIK POINT
18MM
SP UOM PRICE
[email protected] CD
1.58
A
C.LCX
[email protected] EA
2.24
A
C.HXZ
HYDE UTILITY SNAP-OFF KNIFE BLADES
Extra blades are blister packaged on cards, 5 blades each with 13
cutting points on each blade to make a total of 130 cutting points
counting last point on blades. Knife and blades are displayed on
attractive red, white and blue compact blister packaged cards
following the Hyde traditional and distinctive eye and buy appeal
format. 10 per box.
ITEM #
382299
48
DESC
42345 BLADES KNIFE UTILITY
SP
[email protected]
UOM
CD
A
Snap-off blades for use with Hyde snap-off knives
42028, 42030, 42047 and most other 18mm knives.
Comes with 5 blades/40 points.
ITEM #
301655
DESC
42330 BLADES SNAP-OFF 18 MM
SP
[email protected]
UOM
CD
A
PRICE
3.21
L.ECX
Knives and Replacement Blades,
Replacement Blades, Blade Dispensers
AMERICAN SAFETY RAZOR BLADE DISPENSER
High carbon steel. Fits all standard utility knives. 2 notch. 100 in
tray box.
PRICE
2.51
C.YOX
ITEM #
322342
DESC
66-0240 UTILITY BLADE DISPENSER
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
10.12
H.AYX
www.wallacehardware.com
Hand & Power Tools
Knives and Replacement Blades,
Replacement Blades, Blade Dispensers
STANLEY UTILITY KNIFE BLADE DISPENSERS
STANLEY SHARPTOOTH HAND SAWS FATMAX
Contains 100 utility knife blades. Wall display dispenses
blades one at a time for safety and convenience.
ITEM #
333506
DESC
SP UOM PRICE
[email protected] PG
13.82
A
CX.OYX
11-921A UTILITY BLADES W/DISPENSER 1992
100/PK
Hand Saws and Replacement Blades, Hand
Saws, Short Cut Saws
Cuts 50% faster than conventional saws. Induction hardened teeth stays sharp
3 to 5 times longer than standard teeth. Ergonomically designed handle for
better grip and improved comfort. Welded handle to eliminate loose screws.
Reusable blade guard for blade protection. United States Design Patent
D442458 has been granted for the ornamental appearance of the handle.
ITEM #
264210
264229
STANLEY UTILITY KNIFE HOOK BLADE
DISPENSERS
DESC
SP UOM PRICE
[email protected] EA
12.75
A
Y.RCX
[email protected] EA
24.11
A
CA.EVX
20-526 SHARPTOOTH SAW 15IN BLD X 12PT
CUT
20-527 SHARPTOOTH SAW 20IN BLD X 12PT
CUT
Holds 100 of #11-961 Stanley hook blades.
ITEM #
351636
DESC
11-961A HOOK BLADES 1996 100CT
SP
[email protected]
UOM
EA
A
PRICE
70.49
EO.AEX
+20% thicker blade for straigher cuts and to reduce binding. Sharp tooth saw
technology cuts 50% faster than conventional saws. 9 teeth per inch. 65%
thicker handle for the ultimate grip and comfort. Ideal for cutting all types of
wood and plastic. Patent pending.
STANLEY WORKS UTILITY BLADES WITH
DISPENSER
ITEM #
489239
Engineered for general-purpose cutting. Precision-honed edge for
consistent and extended cutting life. Fits most standard utility
knives. Limited lifetime warranty.
ITEM #
445827
DESC
DESC
20-045 HANDSAW 15INX9PTS FATMAX
SP
[email protected]
UOM
EA
A
PRICE
17.02
CL.YLX
SP UOM PRICE
9.25
H.CXZ
11-921L UTILITY BLADES W/DISPENSER H-DUTY [email protected] PG
50PK
A
Hand Saws and Replacement Blades, Hand
Saws, Short Cut Saws
STANLEY SHORT CUT HAND SAWS
Contractor Grade. Aggressive tooth design cuts wood 50% faster than
conventional saws. Induction hardened teeth stay sharp longer than nonhardened teeth. Tell-sell storage sleeve. 20" blade length.
ITEM #
575178
STANLEY SHORT CUT HAND SAWS FATMAX
DESC
SP
[email protected]
15-087 HEAVY DUTY SAW 20INX9 PTS
UOM
EA
A
STANLEY SHORT CUT TOOL BOX HAND
SAWS
Delivers clean cuts faster and a compact blade for easier storage. Hardwood
handle with special square/mitre feature.
ITEM #
351172
DESC
15-334 HANDSAW 15INX9PTS 15INX9 PT
SP UOM
[email protected] EA
A
PRICE
16.33
CL.LAX
PRICE
25.29
CY.LRX
STANLEY UTILITY SAWS
STANLEY CROSSCUT SHORTCUT HAND
SAWS
Each tooth is precision-set and bevel-ground with three distinct cutting angles.
Comfortable hardwood handles.
ITEM #
358045
DESC
15-335 PANEL SAW 20INX8PTS
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
21.15
CR.CZX
Contractor grade. Short Cut Mini. 12 pt. inductionhardened teeth stay sharp longer than non-hardened teeth. Aggressive tooth
design cuts wood 50% faster. 10" blade is ideal for access in tight spaces and
cutting a variety of materials such as plastic pipe, particle board, and wood.
Lifetime Warranty.
ITEM #
336297
DESC
20-221 SHORT CUT SAW FINE FINISH
10INX12PPI
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
12.56
A
Y.ERX
49
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Fast Cut Saws
Hand Saws and Replacement Blades, Hand
Saws, Panel Saws
STANLEY FAST CUT SAWS
GREAT NECK PANEL SAW
Aggressive Tooth Fast Cutting Saw. Fast cuts on both
the push and pull stroke. Precision-ground, razor-sharp teeth. Handle molded
for comfortable grip. Special handle design allows for back of saw to be used
for marking 45 and 90 degree angles. 15" saw fits conveniently in tool box.
15". 8 Pt. High carbon steel blade. Precision set teeth. High impact ABS handle
doubles as a 45 & 90 degree square.
ITEM #
486167
DESC
SP UOM PRICE
[email protected] EA
11.42
A
A.EAX
15-579 GENERAL PURPOSE SAW W/PLS HDL
15INX9PTS
STANLEY THRIFTY HAND SAWS
Handle surrounds blade for lower center of gravity?maximizes cutting
performance, more blade security.
ITEM #
329215
DESC
15-726 HANDSAW 26INX8 PT
SP
[email protected]
UOM
EA
A
PRICE
7.93
E.YRX
ITEM #
175714
DESC
PL15 HAND SAW 15INX8PT
SP
[email protected]
UOM
EA
A
PRICE
9.30
E.VHX
Hand Saws and Replacement Blades, Hand
Saws, Rip Cut Saws
GREAT NECK 26" RIP CUT SAW
26" 8 pt. high carbon steel blade. Precision set teeth. High impact ABS handle.
ITEM #
256226
DESC
PL26S RIP CUT HANDSAW 8PT 26IN
SP
[email protected]
UOM
EA
A
PRICE
11.87
R.YAX
GREAT NECK WOOD HANDLE
STANDARD SAW
26" 8 pt blade. High carbon steel blade. Precision set teeth. Carved select
hardwood handle. Unique handle design allows for superior cutting angle.
Packed in individual sleeves.
ITEM #
256196
DESC
C26S FAST CUT HANDSAW 8PT 26IN
SP
[email protected]
UOM
EA
A
PRICE
23.87
CV.XOX
NICHOLSON HANDSAWS
DESC
NS503N HANDSAW QUICKCUT 15X8PT
SP
[email protected]
UOM
EA
A
Unique handle design eliminates binding and delivers full blade strokes for an
efficient cut. Patented universal tooth grind delivers coarse saw speed with a
fine cut finish. Comfortable grip handle. Blade profile has tapered-pitch nose
for improved clearance and stability. 0.85 mm blade with water-based lacquer
coating for speed and control.
ITEM #
531162
1773465 UNIVERSAL HANDSAW 15IN
SP
[email protected]
531189
1773466 UNIVERSAL HANDSAW 20IN
[email protected]
50
UOM
EA
A
EA
A
DESC
SP
UOM PRICE
15.69
A
Y.OCX
58280 TOOLBOX SAW SHEFFIELD 15INX9PT [email protected] EA
PRICE
7.22
E.VRX
IRWIN UNIVERSAL CROSSCUT SAW
DESC
Sheffield Aggressive Tooth Tool Box Saw. Precision ground and set teeth for
smooth and accurate cutting. Tri-bevel tooth design for more efficient cutting.
High carbon steel for strength and durability. Heat treated teeth for longer life.
Oversized hardwood handle for comfort and efficiency.
ITEM #
220337
Quickcut. Economy. Good "value-to-cost" performance
handsaws.
ITEM #
164240
SHEFFIELD AGGRESSIVE TOOTH TOOL
BOX SAW
PRICE
22.84
CE.RCX
26.18
CH.YXZ
SHEFFIELD AGRESSIVE TOOTH HAND
SAW
Sheffield 15'' Aggressive Tooth Handsaw. Precision ground and set teeth for
smooth and accurate cutting. Tri-bevel tooth design for more efficient cutting.
High carbon steel for strength and durability. Heat treated teeth for longer life.
Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
ITEM #
220175
DESC
58200 TOOLBOX SAW SHEFFIELD 15IN
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
18.02
CX.RYX
www.wallacehardware.com
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Miter Saws
Hand Saws and Replacement Blades, Hand
Saws, Miter Saws and Boxes
STANLEY BACK SAWS
GREAT NECK MITER BOX & SAW
Induction hardened teeth keep cutting edge sharper 3 to 5 times longer than
conventional blades. Contoured molded handle with textured finger grips for
comfort.
14" Back Saw and 12" Plastic Mitre Box with Ruler
Edge.
ITEM #
304417
DESC
17-202 BACK SAW 14IN 13TPI FATMAX
SP
[email protected]
UOM
EA
A
PRICE
14.75
CZ.OLX
ITEM #
335193
DESC
SP
[email protected]
BSB14 MITRE BOX 12IN W/SAW 14IN
UOM
EA
A
PRICE
14.50
A.RLX
Hand Saws and Replacement Blades, Hand
Saws, Miter Boxes
SHEFFIELD MITRE BACK SAW
Sheffield Mitre Back Saw. Reinforced steel back saw
for accurate cutting. Precision ground teeth for smooth, easy cutting. 3" Depth
cut. Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
ITEM #
220302
DESC
SP UOM PRICE
[email protected] EA
20.32
A
CL.XEX
58210 MITRE BACK SAW SHEFFIELD
14INX16PT
Hand Saws and Replacement Blades, Hand
Saws, Miter Saws and Boxes
GREAT NECK PLASTIC MITER BOX
High impact polystyrene construction for rigidity and
durability. Ruler scale for quick measurments. 45 and
90 degree angles. 12" x 4" x 2-1/4".
ITEM #
335150
DESC
PMB12 MITRE BOX 12IN PLASTIC
SP
[email protected]
UOM
EA
A
PRICE
6.85
O.YZX
Hand Saws and Replacement Blades, Hand
Saws, Pull Saws
STANLEY CLAMPING MITER BOX & SAWS
SHEFFIELD DOUBLE EDGE PULL SAW
Uniquely designed honeycomb base and cam shaped pins
secure work for accurate cuts. Hassle free - just twist cam
pint to securely hold material to base while cutting. Cuts
miters on 45 degree and 90 degree, face angle 45 degree,
and all new 22-1/2 degree angle (for octagonal shapes)
popularly used on architectural details such as bay windows. Molded-in
storage compartments to hold cam pins and pencil.
Sheffield Double Edge Pull Saw. 10" Graduated medium rip cut / extra fine
cross cut blade. Works with inter-changeable handle and blades. Perfect for
dovetails, moldings, particle board, plywood, and flush cuts. Handle can be
reversed for use in tight spaces. Ergonomic rubber grip handle with Sheffield
Oval-Grip pattern.
ITEM #
341819
DESC
SP UOM PRICE
20.80
A
CR.XZZ
DESC
58242 PULL SAW DOUBLE SIDED
10INX18PT
SP UOM PRICE
[email protected] EA
29.52
A
CH.ECX
20-600 CLAMPING MITRE BOX W/ 14IN SAW [email protected] EA
STANLEY MITER BOX & SAWS
Patented new storage system, holds all Stanley 12IN x
14IN backsaws. Finger button allows easy release of
saw from storage cavity. 90 degree and 45 degree
miter slots as well as 22-1/2 degree slots for octagon shapes. Holes in base for
fastening to a work bench. Front lip butts up against work table to reduce
slippage. Miter box made from lightweight, high impact ABS plastic interior is
open to allow cuttings to fall through.
ITEM #
350435
ITEM #
237132
DESC
19-800 SAW STORAGE MITRE BOX WITH 14IN
SAW
www.wallacehardware.com
SHEFFIELD HEAVY DUTY PULL SAW
Sheffield Heavy Duty Pull Saw. 13 inch Rip and coarse cut blade for medium to
coarse cut. Works with interchangeable handle and blades. Perfect for
framing, treated lumber, log, and timbers. Handle can be reversed for use in
tight spaces. Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
ITEM #
237140
DESC
58241 PULL SAW HVY DUTY 13INX9PT
SP UOM PRICE
[email protected] EA
12.46
A
Y.VRX
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
26.56
CE.HRX
51
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Pull Saws
SHEFFIELD ALL PURPOSE PULL SAW
Sheffield All Purpose Pull Saw. 10-1/2 inch Cross cut blade for fine to medium
cut. Works with interchangeable handle and blades. Perfect for plywood,
particle board, molding, and 2x4's. Handle can be reversed for use in tight
spaces. Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
ITEM #
237159
DESC
SP
UOM
58240 PULL SAW ALL PURPOSE 9INX17PPI [email protected] EA
A
PRICE
18.97
CZ.LRX
Cuts on pull stroke. Pulling motion prevents binding and provides better
control. Micro-thin blade and precision-ground teeth provide clean cuts. The
light weight and natural flow of the pulling motion result in less fatigue than
with push-stroke saws. Made for aggressive cross-cutting and ripping, with a
flexible blade that makes good flush cuts. Perfect for cleaning out 90-degree
circular saw cuts and bird's mouth rafter cut.
DESC
213101 PULL SAW 12IN GC
SHEFFIELD DOUBLE EDGE WALLBOARD
SAW
Sheffield Double Edge Wallboard Saw. 6'' blade length. Bevel ground 3 sided
teeth for versatile cuts. Hardened and tempered steel for strength and
durability. Double edge design for easier, faster cutting. Pointed tip for plunge
cuts. Oversized ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
ITEM #
220744
DESC
SP
UOM PRICE
7.56
A
V.VYX
58231 WALLBOARD SAW DOUBLE EDGE 6IN [email protected] EA
STANLEY WALLBOARD SAWS
IRWIN PULL SAW
ITEM #
531030
Hand Saws and Replacement Blades, Hand
Saws, Jab Saws
SP
[email protected]
UOM
EA
A
Cushion grip, contractor grade wallboard saw. Non-slip grip. Blade and teeth
are fully hardened and tempered for maximum durability, strength and
flexibility. Specially designed teeth to make clean, quick cuts with no clogging.
Full lifetime warranty, Made in U.S.A.
ITEM #
342858
DESC
SP UOM PRICE
[email protected] EA
7.47
A
E.RAX
15-556 WALLBOARD SAW 6IN CUSHION
GRIP
PRICE
27.52
CA.AXZ
STANLEY WALLBOARD SAWS
Designed especially for plasterboard ? make cut-outs for electric outlets, etc.
Self-starting (point-sharpened for plunge cuts). Hardwood handle. Individually
carded. 6" blade length.
IRWIN DOUBLE EDGE PULL SAW
Cuts on pull stroke. Pulling motion prevents binding and provides better
control. Micro-thin blade and precision-ground teeth provide clean cuts. The
light weight and natural flow of the pulling motion result in less fatigue than
with push-stroke saws. Made for utility ripping and cross-cutting. Perfect for
flush-cutting door shims and remodeling work.
ITEM #
531049
DESC
213103 PULL SAW DBL BLADE
SP
[email protected]
UOM
EA
A
PRICE
28.04
CY.CHX
ITEM #
368121
DESC
SP UOM PRICE
[email protected] EA
3.41
A
L.EHX
15-206 WALLBOARD SAW 6IN WOOD
HANDLE
GREAT NECK DOUBLE EDGE
WALLBOARD SAW
Hardened and tempered 6" steel blade with sharpened teeth on both edges.
Easily cuts through wallboard and synthetic building materials. Large heavy
duty rubber grip handle.
ITEM #
106526
DESC
SP
[email protected]
4932 DBL EDGE WALLBOARD SAW 6IN
UOM
EA
A
PRICE
6.71
O.YZX
IRWIN DOVETAIL PULL SAW
Cuts on pull stroke. Pulling motion prevents binding and provides better
control. Micro-thin blade and precision-ground teeth provide clean cuts. The
light weight and natural flow of the pulling motion result in less fatigue than
with push-stroke saws. Made for flush-cutting dowels and fine detail cuts.
Perfect for trim detail work, such as around windows and door frames.
ITEM #
531073
52
DESC
213104 PULL SAW DOVETAIL
SP
[email protected]
UOM
EA
A
PRICE
20.01
CO.RAX
GREAT NECK WALLBOARD SAW
Hardwood handle. For wallboards and sheet rock. Easily makes cutouts for
switches & outlets. Pointed blade for plunge cuts.
ITEM #
543225
DESC
WL6C WALLBOARD SAW 6IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
4.77
L.HAX
www.wallacehardware.com
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Jab Saws
Hand Saws and Replacement Blades, Hand
Saws, Jab Saws
HOWARD BERGER WALLBOARD SAW
GOLDBLATT UTILITY JAB SAW
Self-starting pointed blade for plunge cuts and close quarter works. 6"
blade. Deluxe rubber grip handle. Heavy-duty.
Dual ground tooth design makes fast clean cuts. Thin blade design reduces
friction and is great for cutting in tight areas. For use on drywall, wood and
plastic. Comfort grip cushioned handle.
ITEM #
236608
DESC
92130 WALLBOARD SAW H-D RUBBER GRIP
6IN
SP UOM PRICE
[email protected] EA
7.89
A
V.HLX
ITEM #
365211
DESC
G05183 WALLBOARD SAW W/ CUSHION
HANDLE 6IN
SP UOM PRICE
[email protected] EA
5.04
A
O.ORX
IRWIN DRYWALL JAB SAW
Rigid (1.2mm) blade. Bi-Ground teeth. Hardwood handle. Blade Thickness
1.2mm. Blade Size 6-1/2".
HYDE MAXXGRIP JAB SAWS
One of the fastest and strongest multi-saws on the market: cut quickly through
drywall, wood, Masonite? and plywood. Sharp point penetrates drywall
without drilling. Rubberized handle is ergonomically designed for comfort and
safety. Double-ground high carbon steel teeth cut in both directions (pushing
and pulling). Wide tooth-set reduces binding and friction.
ITEM #
335452
DESC
09016 SAW PRO JAB MAXXGRIP 6 IN
SP
[email protected]
UOM
EA
A
PRICE
5.75
V.OZX
The FatMax jabsaw's sharp tooth design can cut 50%
faster than traditional tooth designs. Cuts on both push and pull strokes. The
sharpened tip can easily cut punches through drywall. For durability, the
blades are hardened and tempered. Cuts through wood, plastic and drywall.
Non-slip comfort grip. Handle structure designed for strength and durability.
DESC
20-556 JAB SAW 6IN BLADE 9 PTS PER INCH
FATMAX
SP UOM PRICE
[email protected] EA
11.48
A
A.RVX
Sharp Tooth. Cuts 50% faster than conventional saws.
Cuts on both the push and pull stroke. Sharpened tip
easily punches through drywall. Induction hardened
teeth stay sharp 3 to 5 times longer than standard
teeth. Blade can cut through cement board. Ideal for
drywall, wood and plastic. Ergonomic non-slip grip to maximize comfort and
use. Composite handle design for strength and durability. 12" total length.
Blade is 1" x 6-1/4".
DESC
G20556 DRYWALL JAB SAW 6IN
www.wallacehardware.com
SP UOM PRICE
5.05
O.OYX
Thick-body blade is exceptionally rigid for better cut control. Tri-Ground Teeth
are aggressive for fastest, smoothest cutting. Ergonomic handle with
ProTouch rubberized grip provides comfort and control. For roughing in
drywall, cutting out HVAC, plumbing, and electrical openings or cutting ceiling
tile openings.
DESC
2014100 SPECIALTY SAW IRWIN PREM PRO
DRYWALL
SP UOM PRICE
[email protected] EA
16.94
A
CZ.EAX
IRWIN STANDARD UTILITY SAW
11-1/2" Blade Length. 10 Point Tooth Count. Thick-Body
(1mm) blade. Aggressive Tri-Ground teeth. Hardwood handle.
ITEM #
531219
DESC
2014200 SPECIALTY SAW-IRWIN PROF
TOOLBOX
SP UOM PRICE
[email protected] EA
16.43
A
CZ.LOX
Hand Saws and Replacement Blades, Hand
Saws, Keyhole Saws
GOLDBLATT JABSAWS
ITEM #
182605
DESC
2014102 SPECIALTY SAW IRWIN DRYWALL/JAB [email protected] EA
SAW
A
IRWIN PROTOUCH DRYWALL JAB SAW
ITEM #
531197
STANLEY FATMAX JABSAW
ITEM #
163910
ITEM #
531120
SP
[email protected]
UOM
EA
A
PRICE
11.13
H.VLX
STANLEY KEYHOLE SAWS
Comfortable, lightweight pistol grip handle with one
each wood cutting and metal cutting blades. Cuts into
places where hacksaw cannot reach or cut. Cuts curves, circles frets in wood,
nails, metal lath, composition and board. BX cable, conduit, etc. 6" and 8"
blade. 6 per box.
ITEM #
318213
DESC
15-275 4-WAY KEYHOLE SAW W/2 BLADES
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
6.38
V.AEX
53
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Keyhole Saws
GREAT NECK KEYHOLE SAW
Features a 4-in-1 saw blade that can be fitted securely
into the steel handle in the vertical cut position or the horizontal position by
simply snapping it into place.
ITEM #
830399
DESC
87 KEYHOLE SAW GREAT NECK
SP
[email protected]
UOM
CD
A
PRICE
5.51
O.LHX
GREAT NECK KEYHOLE SAW
DESC
SP
[email protected]
89 KEYHOLE SAW W/EXTRA BLADES
UOM
EA
A
PRICE
6.85
V.XOX
Sheffield Keyhole Saw. Solid steel blade for strength
and durability. 4 Positions: Top facing left or right, or
Side facing up or down. Includes: 24PPI blade for metal cutting & 18PPI blade
for wood cutting. Ergonomic rubber grip handle with Sheffield Oval-Grip
pattern.
DESC
SP UOM PRICE
[email protected] EA
8.41
A
V.YAX
58220 KEYHOLE SAW 4-POSITIONS
W/BLADES
Hand Saws and Replacement Blades, Hand
Saws, Compass Saws
STANLEY FATMAX COMPASS SAW
Used specifically for fine finish, plywood and hardwoods. Designed for precise
cutting including dovetails, miters, and tenons. Heavy duty screws for secure
blade to handle assembly. Solid, one-piece bi-material handle delivers
increased durability and comfort.
ITEM #
118354
DESC
SP
[email protected]
17-205 COMPASS SAW 9TPI 12IN
UOM
EA
A
PRICE
12.25
Y.VCX
GREAT NECK COMPASS SAW
Professional grade compass saw. 8 pt. high carbon steel blade. Genuine
hardwood handle.
ITEM #
368970
54
DESC
M212 COMPASS SAW 12IN
Sheffield Coarse Tooth Compass Saw. 12'' blade length, 8PPI. Precision
ground and set teeth for smooth and accurate cutting. Heat treated teeth for
strength and durability. Ergonomic rubber grip handle with Sheffield Oval-Grip
pattern.
ITEM #
220183
DESC
58201 COMPASS SAW SHEFIELD 12IN
SP
[email protected]
UOM
EA
A
PRICE
10.60
R.LYX
IRWIN DOVETAIL / JAMB SAWS
ProTouch. Wide-body blade (50mm). Reversible Flush-cut blade. Springloaded pin enables the blade to reverse for left or right cutting. Ergonomic
ProTouch handle.
SHEFFIELD KEYHOLE SAW
ITEM #
220876
SHEFFIELD COARSE TOOTH COMPASS
SAW
Hand Saws and Replacement Blades, Hand
Saws, Flush Cut Saws
Metal handle. 4 blade positions. Includes 2 Blades: 10
pt for wood cutting, 24 pt for metal cutting.
ITEM #
256269
Hand Saws and Replacement Blades, Hand
Saws, Compass Saws
SP
[email protected]
UOM
EA
A
PRICE
11.38
R.RYX
ITEM #
204382
DESC
2014450 DOVETAIL/JAMB SAW 10IN 14PT
SP UOM
[email protected] EA
A
PRICE
14.95
CX.CHX
STANLEY FLUSH CUT SAWS
Contractor Grade Flush Cut Saw. Flexible blade cuts
plugs or dowels flush. 23 point blade cuts quickly and cleanly on the pull
stroke. Double sided blade for convenient cutting to the left or right.
Comfortable handle contoured for maximum control. Excellent for trimming
through lap joints. 4-3/4" blade.
ITEM #
486248
DESC
20-331 FLUSH CUT PULL SAW BLADE 23PT
SP UOM
[email protected] EA
A
PRICE
12.81
Y.HEX
IRWIN MARATHON STANDARD COARSE
CUT SAW
M2 advanced tooth geometry and Tri-Ground teeth provide a fast, efficient
cut. Deep Gullets provide rapid removal of chips. Carpenter saw's 12-point,
extra-fine front teeth provide a rapid, smooth start. Tapered-Pitch nose
improves clearance and stability. Handsaw is designed for coarse cuts. 1mm
thick blade delivers rigidity and control. Tapered-Pitch nose improves
clearance and stability. Ergonomic hardwood handle provides comfort and
control.
ITEM #
531146
DESC
2011102 CARPENTER SAW 15IN COARSE 9PT
1MM BLD
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
17.70
A
CZ.ARX
www.wallacehardware.com
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Flush Cut Saws
IRWIN MARATHON STANDARD COARSE
CUT SAW
STANLEY 3-IN-1 SAW SET
M2 advanced tooth geometry and Tri-Ground teeth provide a fast, efficient
cut. Deep Gullets provide rapid removal of chips. Carpenter saw's 12-point,
extra-fine front teeth provide a rapid, smooth start. Tapered-Pitch nose
improves clearance and stability. Handsaw is designed for coarse cuts. 1mm
thick blade delivers rigidity and control. Tapered-Pitch nose improves
clearance and stability. Ergonomic hardwood handle provides comfort and
control.
ITEM #
531154
Hand Saws and Replacement Blades, Hand
Saws, Multi Saws
DESC
2011104 CARPENTER SAW 20IN COARSE 9PT
1MM BLD
SP UOM PRICE
[email protected] EA
21.47
A
CV.RHX
Ergonomically designed handle made with glass-filled,
high-strength nylon to support six different blade positions. No tools required
for blade change. Integrated blade storage; the turn knob allows the user to
conveniently store all three blades on the handle when not in use. Multipleposition handle allows access to tight corners 10 inches x 11 TPI. Universal
blade cuts on the pull stroke and is less likely to jam or bend. Cuts through
tree limbs, 2 x 4's and plastic pipes. 8 inch x 9 TPI Compass saw blade carves
patterns and shapes out of wood. 6 inch x 24 TPI Metal cutting blade cuts
through metal pipes and metal rods.
ITEM #
534951
DESC
20-092 MULTI-PURPOSE 3-N-1 SAW
SP
[email protected]
UOM
EA
A
PRICE
18.45
CV.XYX
Hand Saws and Replacement Blades, Hand
Saws, Pocket Saws
IRWIN PROTOUCH MULTI SAW
STANLEY POCKET SAWS
Handyman Folding. A versatile saw that accepts standard sabre and
reciprocating saw blades. Features extra blade storage in the handle. Plastic
handle. 8" long when closed.
ITEM #
351369
DESC
15-333 FOLDING POCKET SAW 6IN
SP
[email protected]
UOM
EA
A
PRICE
10.48
H.YAX
Includes blades for cutting both metal and wood. Spring-loaded pin holds
blade securely while making it easy to change. Ergonomic handle with
ProTouch rubberized grip provides comfort and control. Use for quick and
convenient cuts in PVC, wood, or metal, and flush-cutting screws or other
fasteners.
ITEM #
531316
DESC
2015100 SPECIALTY SAW IRWIN CUSHION
GRIP MULTI
SP UOM PRICE
[email protected] EA
12.65
A
A.VAX
LENOX FOLDING JAB & UTILITY SAW
Designed for cutting multiple materials. Includes
plaster and general purpose reciprocating blade (635R
& 636RP). Rubberized grip prevents hand fatigue
during use. Reinforced locking mechanism prevents
blade from pulling out or handle closing during use.
Aluminum construction maximizes strength of handle. Accommodates
hacksaw blade. Ideal for flush cutting applications or when a hacksaw is not
available. Applications: Drywall, plaster, wood and metal cutting.
ITEM #
060925
DESC
20997TFHS618636 FOLDING SAW
SP
[email protected]
UOM
EA
A
PRICE
32.97
LZ.CXZ
Hand Saws and Replacement Blades, Hand
Saws, Multi Saws
IRWIN COMBI-SAW
Primary uses - Gardening/pruning and metal cutting.
Contains both wood cutting and hacksaw blades.
ProTouch? Grip provides comfort and control.
ITEM #
531332
DESC
218HP300 COMBI-SAW 12"/317MM HRD PT
SP UOM
[email protected] EA
A
PRICE
14.57
Y.YRX
Hand Saws and Replacement Blades, Hand
Saws, Coping Saws
STANLEY COPING SAWS
STANLEY MULTI-SAWS
Contractor grade. Multi-Functional Cushion Grip. Ergonomic cushioned curved
handle. 6" blade length.
ITEM #
336300
DESC
20-220 MULTI SAW W/RECIP AND HACK
BLADES FATMAX
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
8.23
A
R.LVX
High carbon steel blade. Walnut stained hardwood
handle. Length is 6-3/8". 4-3/4" Depth.
ITEM #
368091
368083
DESC
15-104 COPING SAW 4-3/4
FATMAX
15-106 COPING SAW 6-3/4
FATMAX
1-800-776-0976 NOVEMBER
2016
INFO
SP UOM
4-3/4" DEPTH" [email protected] EA
A
6-3/4" DEPTH" [email protected] EA
A
PRICE
5.81
V.OHX
6.13
V.RCX
55
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Coping Saws
VERMONT AMERICAN COPING SAWS
Professional. For sawing in any position. 3/16" x 3/8"
steel frames plated for rust resistance and durable
hardwood handles. Saws are fully adjustable to cut on any curve in any
position. Furnished with 10-tooth per inch spring steel blades.
ITEM #
367435
DESC
SP
[email protected]
48573 COPING SAW DEPTH 4-3/4IN
UOM
EA
A
PRICE
7.79
V.AVX
4 3/4" Depth of cut. Nickel plated frame. 360 Degree
adjustable blade. Set Includes Assorted Blades: Fine For Thin Woods Medium - For Hard Woods And Plastics Coarse - For Rough
Cuts In Wood.
DESC
CP9 COPING SAW 4-3/4IN W/BLDS
STANLEY HIGH TENSION HACKSAWS FATMAX
One piece durable body for prolonged life, allowing for extra high 330 lb.
tension. Quick and easy blade change with pre-tensioning. Comes with a bimetal blade 24 tpi. Power load sliding tension, gives extra leverage. Thumbdial adjustable tension mechanism with quick change features allows for
tension memory, no resetting after each blade change. Ergonomically
designed contoured handle and front thumb grip to give better control.
ITEM #
264237
GREAT NECK COPING SAW
ITEM #
106577
Hand Saws and Replacement Blades, Hand
Saws, Hack Saws
SP
[email protected]
UOM
EA
A
PRICE
9.06
E.LHX
DESC
SP UOM PRICE
23.62
A
CA.CHX
20-531 H-TENSION HACKSAW 12IN FATMAX [email protected] EA
STANLEY HIGH TENSION HACKSAWS
Contractor Grade Adjustable tension holds blade at up
to 32,000 p.s.i. Blade storage in frame. Tension guide on handle lever. 3-7/8"
depth of throat. 12" blade length.
ITEM #
575216
DESC
15-113 HIGH TENSION HACKSAW 12IN
SP
[email protected]
SHEFFIELD HEAVY DUTY STEEL COPING
SAW
Sheffield Heavy Duty Steel Coping Saw. 360 Adjustable
blade for flexible cutting. Heavy duty steel frame for strength and durability.
Fully polished plating to resist rust. Includes 4 blades: 1 fine, 2 medium, and 1
coarse. Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
ITEM #
220663
DESC
SP UOM PRICE
[email protected] EA
9.25
A
E.VYX
58203 COPING SAW STEEL HVY DUTY
SHEFFIELD
Patented design. I-beam frame constructon. Frame
made from high impact polymer with steel core. Sloped nose for access into
tight, hard-to-reach places. 4" depth of cut. Ergonomic non-slip grip. Easy
open lever for quick and easy blade change. High tension blade for straight
accurate cuts. 12" fixed blade frame.
DESC
15-892K COMPOSITE HACKSAW 12IN
SP
[email protected]
IRWIN PROTOUCH COPING SAW
ITEM #
531227
DESC
2014400 SPECIALTY SAW IRWIN PREMIUM
PRO COPING
SP UOM PRICE
[email protected] EA
11.38
A
H.HAX
ITEM #
531251
531294
56
DESC
2014500 SPECIALTY SAW ACCES-IRWIN
COPING SAW
2014501 SPECIALTY SAW ACCES-IRWIN
COPING SAW
SP UOM PRICE
[email protected] EA
3.15
A
L.CZX
[email protected] EA
3.15
A
L.CZX
UOM
EA
A
PRICE
12.55
Y.ERX
STANLEY ADJUSTABLE FRAME
HACKSAWS
Handyman. Rigid steel frame adjusts for 8", 10" and 12" blades. Blade can be
positioned to cut in 4 directions. Molded vinyl handle. Furnished with 10"
flexible hard-edge blade. Depth of Throat: 3-7/8".
ITEM #
318523
DESC
STHT20139L HACKSAW 12IN 12IN
IRWIN COPING SAW REPLACEMENT
BLADES
Replacement blades for the ProTouch Coping Saw (#2014400). Coarse-tooth
blades. Carbon Material. 3-pack.
PRICE
28.86
LC.AZX
STANLEY COMPOSITE HACKSAWS
ITEM #
350338
Flat-bar frame has a 5 1/2-inch frame depth. DuraSteel pins hold blades
securely. High-speed blade delivers fast, smooth cuts. Ergonomic
handle with ProTouch rubberized grip provides comfort and control.
Use for cutting the curved profile on crown, base, or chair rail molding,
or as a supplement to power tools.
UOM
EA
A
SP
[email protected]
UOM
EA
A
PRICE
11.38
A.ERX
STANLEY FIXED FRAME HACKSAWS
Solid Frame. Sturdy all metal frame will not break apart, pivot-load blade
design, full grip protects knuckles. Blade length: 10". Depth of throat: 3-1/2".
ITEM #
366005
DESC
STHT20138 HACKSAW SOLID FRAME 12IN
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
7.07
E.LHX
www.wallacehardware.com
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Hack Saws
NICHOLSON FIXED FRAME HACKSAWS
LENOX HIGH TENSION HACKSAW
FRAMES
For DIY and home use. Sturdy steel frame with plastic
handle. 12" blade.
ITEM #
336041
DESC
SP
[email protected]
80950 HACKSAW -ECONOMY
Hand Saws and Replacement Blades, Hand
Saws, Hack Saws
UOM
EA
A
PRICE
7.76
E.AXZ
Hand hacksaw frame. Heavy-duty aluminum handle.
Rectangular steel crossbar. Blade storage. Converts to jab or compass saw.
Blade tensions to 28,000 psi. Steel tensioning nut. Fold away tension lever. 45
degree blade holder pins for flush cutting. Resists breakage. Length is 15-1/2";
width is 6"; uses 12" long blades. High tension.
ITEM #
391883
DESC
SP
[email protected]
12132-HT50 FRAME HACKSAW HT
GREAT NECK PROFESSIONAL HITENSION HACKSAW
Professional 4-1/4" Depth Cut. Hollow bar for blade storage. Accepts high
tension without damage. Extra storage aluminum die cast handle for
lightweight strength. Anchors for straight or 45 degree cut.
ITEM #
256307
DESC
245 HACKSAW FRAME
SP
[email protected]
UOM
EA
A
PRICE
14.81
A.HXZ
Professional 3-1/2" Depth Cut. Fits 10" and 12" Blades. Adjusts To 4 Cutting
Positions. Plated To Resist Rust. Heavy Duty Steel and l Hi-Impact Plastic Pistol
Grip Handle.
DESC
100 HACKSAW FRAME PISTOL GRIP
SP
[email protected]
PRICE
34.37
LZ.YAX
HOWARD BERGER ADJUSTABLE
HACKSAW
10" - 12" adjustable length. 3-1/2" clearance. Chrome. Cast zinc alloy handle.
ITEM #
236535
DESC
SP UOM PRICE
6.15
A
O.RLX
92148 HACK SAW ADJ MINI 10-12IN CHROME [email protected] EA
STANLEY MINI HACKSAWS
GREAT NECK PROFESSIONAL HACKSAW
FRAME
ITEM #
256285
UOM
EA
A
UOM
EA
A
PRICE
13.04
H.RYX
Contractor Grade Metal Mini-Hack Utlity Saw. Cast
aluminum handle is lightweight but built for durability.
Comfortable handle design. Supplied with a high performance, 10" bi-metal
blade goes all the way to end of handle.
ITEM #
486205
DESC
SP
UOM PRICE
4.46
A
O.OZX
15-809 MINI HACK UTILITY SAW 10IN METAL [email protected] EA
STANLEY MINI HACKSAWS
Uses regular hacksaw blades. For hard-to-get-at places and light
duty cutting. Durable molded frame offers maximum hand comfort. 83/4" length without blade.
GREAT NECK ECONOMY HACKSAW
FRAME
3 1/8" depth of cut. Uses 10" or 12" blades, 9/16" x 5/32" stock. Adjusts to 4
cutting positions. High impact pistol grip handle.
ITEM #
369039
DESC
50 ECONOMY HACKSAW FRAME
SP
[email protected]
UOM
EA
A
PRICE
7.71
V.VZX
ITEM #
487023
DESC
SP
[email protected]
20-807 MINI HACK SAW 10IN
UOM
EA
A
PRICE
4.31
O.LVX
LENOX HACKSAWS
Rugged heavy-duty aluminum handle. Includes BiMetal 10" (250mm) Lenox handsaw blade. 5 per box.
GREAT NECK FIXED HACKSAW FRAME
Economy Hacksaw Frame. 3 1/8" depth of cut. Fixed frame for 10" blades.
High impact pistol grip handle.
ITEM #
256277
DESC
55 FIXED FRAME HACKSAW 10IN
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
8.94
E.LEX
ITEM #
546836
DESC
20975-975 HACKSAW
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
11.86
H.YRX
57
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Hack Saws
LENOX HACKSAW FRAME
D-shaped handle with ergonomic grip and front hand
rest. Flush cutting with extra blade storage. Blade tension up to 20,000 PSI.
Includes 1 blade.
ITEM #
310441
DESC
SP
[email protected]
12131-88300 HACKSAW FRAME
UOM
EA
A
PRICE
23.96
CR.XHX
Hand Saws and Replacement Blades, Hand
Saws, Hack Saws
SHEFFIELD QUICK RELEASE HIGH
TENSION HACKSAW
Sheffield Quick Release High Tension Hacksaw. Quick release mechanism for
easy blade changes. Anchors for straight or 45 degree cut. High tension screw
for easy blade changes with hollow bar for blade storage. Die cast aluminum
handle for lightweight strength. Ergonomic rubber grip handle with Sheffield
Oval-Grip pattern.
ITEM #
220388
DESC
SP UOM
[email protected] EA
A
58251 HI-TENSION HACKSAW SHEFFIELD
PRICE
38.92
LO.XYX
GREAT NECK CLOSE QUARTER
HACKSAW
10" High. Speed Blade. 24 Teeth per Inch. Aluminum Frame. Textured
Ergonomic Grip.
ITEM #
175366
DESC
SP UOM PRICE
HF25 CLOSE QUARTER HACKSAW 24T ALUM [email protected] EA
6.64
A
O.YLX
SHEFFIELD HEAVY DUTY STEEL
ADJUSTABLE HACKSAW
Sheffield Heavy Duty Steel Adjustable Hacksaw. Heavy duty steel frame for
strength and durability. Accepts 10" and 12" blades. Adjusts to 4 cutting
positions. Includes 1 12" 24TPI hacksaw blade. Ergonomic rubber grip handle
with Sheffield Oval-Grip pattern.
ITEM #
220353
GREAT NECK MINI HACKSAW FRAME
Molded high impact plastic handle. Adjustable close quarter hacksaw frame.
Includes 10" standard hacksaw blade.
ITEM #
578703
DESC
HF10 MINI HACKSAW
SP
[email protected]
UOM
EA
A
DESC
SP UOM PRICE
[email protected] EA
16.21
A
Y.RCX
58250 ADJUSTABLE HACKSAW HVY DUTY
STEEL SHEFFIELD
PRICE
4.55
L.RLX
LENOX 12" MEDIUM TENSION HACKSAW
FRAME
GREAT NECK MIDGET HACKSAW FRAME
Designed for fine, close work with 6" x 1/4" hacksaw blade. Good for metal
cutting. Uses Great Neck #615C replacement blades.
ITEM #
165808
DESC
35C MIDGET HACKSAW FRAME
SP
[email protected]
UOM
CD
A
PRICE
3.12
C.AEX
SHEFFIELD TRUE CLOSE QUARTER
ADJUSTABLE HACKSAW
Lightweight aluminum beam achieves 20K PSI. Ergonomic and durable
aluminum handle for a confident grip in most work environments. Mount blade
at 45? for flush cutting applications.
ITEM #
387991
DESC
1805722 HACKSAW FRAME FRAME
SP
[email protected]
Hacksaws adjustable aluminum handle blade length 12
inches. Lightweight aluminum beam achieves 15K PSI;
durable aluminum handle for a confident grip in most
work environments; mount blade at 45 degrees for
flush cutting applications.
ITEM #
220825
ITEM #
388009
58
PRICE
18.21
CL.XYX
LENOX ADJUSTABLE HACKSAW FRAME
Sheffield True Close Quarter Adjustable Hacksaw. 10'' blade length. Adjustable
blade brace to fit any size, style, or type of hacksaw blade. Heavy gauge die
cast aluminum for strength and durability. Includes 10" carbon steel blade.
Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
DESC
UOM
EA
A
SP UOM PRICE
8.04
V.HYX
58252 QUARTER ADJUSTABLE HACKSAW 10IN [email protected] EA
SHEFFIELD
A
DESC
1805723 ADJUSTABLE HACKSAW FRAME
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
16.08
CX.HAX
www.wallacehardware.com
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saws, Hack Saws
Hand Saws and Replacement Blades, Hand
Saws, Pipe Saws
COBRA PRODUCTS MINI HACKSAW
LENOX PLASTIC PIPE HAND SAW
Mini hacksaw for cutting brass, copper, iron pipe, PVC,
steel and wood.
Heavy-duty aluminum handle. Carbon steel blade.
Tooth hardness Rc 64. 2-5/8" blade width. Spring tempered blade back.
ITEM #
856282
DESC
PST113 MINI HACKSAW
SP
[email protected]
UOM
EA
A
PRICE
9.80
E.AHX
Hand Saws and Replacement Blades, Hand
Saws, Bow Saws
NICHOLSON COMBINATION BOWSAW &
HACKSAW
Comes with 2 blades: Hacksaw and Bowsaw. Built-in hand safety guard. Full
throat makes cutting plastic pipe easy. Bowsaw cuts in both directions.
ITEM #
599875
DESC
80799 BOW HACK 12IN
SP
[email protected]
UOM
EA
A
PRICE
13.18
Y.YHX
ITEM #
391867
20985HSF12 HAND SAW PVC 12IN
SP
[email protected]
391832
20980HSF18 HAND SAW PVC 18IN
[email protected]
12" Bowsaw/Hacksaw Combination Saw with 2 Blades Included. Bow Saw for
Cutting Wood 12" Hacksaw Blade for Metal and Other Materials. Extra Heavy
Duty Frame with Textured Coated Grip.
DESC
PRICE
24.02
CR.XLX
26.94
CH.YRX
5-angle adjustment handle. 1 per sleeve.
ITEM #
691984
PST111 PVC SAW 13IN
DESC
SP
[email protected]
691992
PST112 PVC SAW 118IN
[email protected]
UOM
EA
A
EA
A
PRICE
13.63
A.CRX
17.07
CX.LZX
GREAT NECK PVC PIPE SAW
13". Cuts PVC, CPVC, ABS Wood, Drywall, and more.
Heat treated blade lasts up to 5 times longer than conventional.
DESC
PMPVC PVC PIPE SAW 13IN
SP
[email protected]
UOM
EA
A
PRICE
11.63
R.YXZ
Hand Saws and Replacement Blades, Hand
Saws, Cable Saws
GREAT NECK COMBINATION BOWSAW
& HACKSAW
15550 BOWSAW/HACKSAW COMBINATION
12IN
UOM
EA
A
EA
A
COBRA PVC SAW
ITEM #
106666
ITEM #
175579
DESC
SP UOM PRICE
[email protected] EA
8.57
A
E.XVX
COBRA PVC CABLE SAW
Stainless steel cable. 24" long. 1 per card.
ITEM #
691968
DESC
PST110 PVC CABLE SAW
SP
[email protected]
UOM
CD
A
PRICE
4.72
L.AOX
Hand Saws and Replacement Blades, Hand
Saws, Nest of Saws
JMK/IIT 12" BOW/HACKSAW
STANLEY NEST OF SAWS
Durable carbon steel construction. 4 teeth per inch
bow saw blade. 24 teeth per inch hacksaw blade. Can
be used as Bow or Hack saw.
4 piece set includes: pistol grip handle, 10" short cut
finish blade (12 point), 10" compass saw blade, 6" metal cutting blade. Perfect
for cutting curries, circles and trim work.
ITEM #
127817
DESC
56310 BOW/HACKSAW 12IN
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
7.42
V.OAX
ITEM #
589004
DESC
15-090 NEST OF SAWS-3BLD
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
14.01
CX.HZX
59
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saw Blades, Hack Saw Blades
Hand Saws and Replacement Blades, Hand
Saw Blades, Hack Saw Blades
GREAT NECK MIDGET HACKSAW BLADES
STANLEY BI-METAL HACKSAW BLADES
5 pack of 6" blades with pins for midget hacksaw
Bi-Metal Hacksaw Blades 15-600 Series. Made for the user who does
not compromise performance. Stanley Bi-Metal blades combine the
flexiblity of carbon steel backs with the cutting performance of high
speed steel. 1 blade per card.
ITEM #
369047
ITEM #
486191
15-632 BI-METAL HACKSAW BLADE 12IN X 18T [email protected] CD
486183
15-631 BI-METAL HACKSAW BLADE 12IN X24T
486175
15-630 BI-METAL HACKSAW BLADE 12IN X
32T
DESC
615C MIDGET HACKSAW REPL
BLADE 6IN 5PK
INFO
SP UOM PRICE
5 PER CARD [email protected] CD 3.16
A
C.ARX
STANLEY HACKSAW BLADES - 800 SERIES
High speed steel blades cut most metals including unhardened tool
steel and stainless. Individually carded. 1 blade per card.
ITEM #
329312
329304
329290
329258
329231
329223
DESC
15-808A HACKSAW BLADE 10INX18TPI HIGH
SPD STL
15-804A HACKSAW BLADE 10INX24TPI HIGH
SPD STL
15-802A HACKSAW BLADE 10INX32TPI HIGH
SPD STL
15-828A HACKSAW BLADE 12INX18 TPI HIGH
SPD STL
15-824A HACKSAW BLADE 12INX24 TPI HIGH
SPD STL
15-822A HACKSAW BLADE 12INX32 TPI HIGH
SPD STL
SP UOM PRICE
[email protected] CD 1.43
A
C.XYX
[email protected] CD 1.43
A
C.XAX
[email protected] CD 1.45
A
C.XYX
[email protected] CD 1.57
A
C.LCX
[email protected] CD 1.54
A
C.CHX
[email protected] CD 1.58
A
C.LOX
STANLEY HACKSAW BLADES - 900 SERIES
High carbon steel blades cut mild steel, cast iron, aluminum and
copper. 2 blades per card.
ITEM #
329347
329339
329320
329282
329274
60
DESC
SP UOM PRICE
15-908A HACKSAW BLADES 10INX18TPI
[email protected] CD 1.02
2/CARD
A
X.HAX
15-904A HACKSAW BLADES 10INX24TPI
[email protected] CD 0.97
2./CARD
A
X.HVX
15-902A HACKSAW BLADE 10INX32TPI
[email protected] CD 1.01
2/CARD
A
X.HAX
15-928A HACKSAW BLADE 12INX18TPI 2/CARD [email protected] CD 1.02
A
X.HYX
15-924A HACKSAW BLADE 12INX24TPI
[email protected] CD 1.02
2/CARD
A
X.HZX
DESC
SP
UOM PRICE
1.78
A
C.OEX
[email protected] CD 1.78
A
C.OEX
[email protected] CD 1.81
A
C.OAX
VERMONT AMERICAN HIGH CARBON
STEEL HACKSAW BLADES
Excellent for cutting most metals. Ideal blade for general use. Carded items
contain 2 blades per card.
ITEM #
348791
48231 HACKSAW BLD 10IN X 18T 2CD
DESC
SP
[email protected]
367761
48232 HACKSAW BLADE 10IN X 24T
[email protected]
367796
48236 HACKSAW BLADE 12IN X 18T
[email protected]
367818
48237 HACKSAW BLADE 12IN X 24T
[email protected]
367826
48238 HACKSAW BLADE 12IN X 32T
[email protected]
373907
48216 HACKSAW BLADE 12IN X 18T
[email protected]
373915
48217 HACKSAW BLADE 12IN X 24T
[email protected]
314889
48218 HACKSAW BLADE 12IN X 32T
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
EA
A
EA
A
EA
A
PRICE
1.25
X.AXZ
1.29
X.HYX
1.39
X.ALX
1.39
X.AOX
1.39
X.AOX
0.75
X.VRX
0.75
X.VRX
0.72
X.VRX
VERMONT AMERICAN BIMETAL
HACKSAW BLADES
For finest sawing performance. High speed steel cutting edges welded to alloy
spring steel backs. Bimetal blades are shatterproof.
ITEM #
334332
322164
334340
322172
322180
322199
124427
DESC
UOM
CD
A
48261 HACKSAW BLADE 10IN 24T
[email protected] CD
A
48262 HACKSAW BLADE 10IN X 32T
[email protected] CD
A
48265 HACKSAW BLADE 12IN 18T
[email protected] CD
A
48266 HACKSAW BLADE 12IN 24T
[email protected] CD
A
48267 HACKSAW BLADE 12IN 32T
[email protected] CD
A
48256 HACK SAW BLADE 24T REVERSE 12IN [email protected] EA
A
48260 HACKSAW BLADE 10IN X 18T
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
PRICE
2.05
C.LHX
2.05
C.LVX
2.05
C.LHX
1.99
C.CYX
1.99
C.CYX
1.99
C.CYX
1.79
C.CZX
www.wallacehardware.com
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saw Blades, Hack Saw Blades
LENOX BI-METAL HACKSAW BLADE
APEX NICHOLSON SHATTERPROOF
HACKSAW BLADE
Bi-metal construction. Spring steel back, virtually unbreakable. Shock
resistant. High heat resistance.
ITEM #
546852
DESC
20150-S018HE HACKSAW BLADE 10INX18T
546860
20151-S024HE HACKSAW BLADE 10INX24T
546879
20152-S032HE HACKSAW BLADE 10INX32T
391778
20154-S218HE HACKSAW BLADE 12INX18T
391786
20155-S224HE HACKSAW BLADE 12INX24T
391794
20156-S232HE HACKSAW BLADE 12INX32T
310468
20144-V218HE HACK BLADE 12INX18T
310476
20145-V224HE HACK BLADE 12INX24T
310484
20146-V232HE HACK BLADE 12INX32T
391808
20116-218HE HACKSAW BLADE 12X18T
391816
20117-224HE HACKSAW BLADE 12X24T
391824
20118-232HE HACKSAW BLADE 12X32T
SP
[email protected]
UOM
CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
Hand Saws and Replacement Blades, Hand
Saw Blades, Hack Saw Blades
PRICE
2.26
C.EOX
2.26
C.ELX
2.28
C.EOX
2.39
C.RXZ
2.39
C.RXZ
2.39
C.RXZ
23.00
CE.LHX
23.00
CE.VLX
23.00
CE.VLX
2.25
C.ELX
2.26
C.ELX
2.28
C.EOX
Solid high carbon steel. Tempered to provide hard edge with flexible back.
Specially hardened to induce toughness. Economy blade for sawing light to
medium-hard materials. A good balance of wear resistance, mechanical shock
absorbing properties. Virtually unbreakable.
ITEM #
455067
DESC
532045
63103 HACKSAW BLADE SS1018 10INX18TPI
CARBON
63112 HACKSAW BLADE SS1024 10INX24TPI
CARBON
63145 HACKSAW BLADE SS1218 12INX18TPI
CARBON
63158 HACKSAW BLADE SS1224 12INX24TPI
CARBON
63256 HACKSAW BLADE SS1218 FLEX 2/CD
532053
63268 HACKSAW BLADE SS1224 FLEX 2/CD
532029
63280 HACKSAW BLADE SS1232 FLEX
2/CARD
455075
455083
455091
SP
UOM PRICE
[email protected] EA
0.58
A
X.VZX
[email protected] EA
0.58
A
X.VZX
[email protected] EA
0.61
A
X.VHX
[email protected] EA
0.61
A
X.VHX
[email protected] CD 1.32
A
C.XCX
[email protected] CD 1.32
A
C.XCX
[email protected] CD 1.32
A
C.XCX
APEX NICHOLSON BI-METALOY
HACKSAW BLADE
SHEFFIELD COARSE CUT HI-SPEED
STEEL HACKSAW BLADES
Sheffield 12" Coarse Cut Hi-Speed Steel Hacksaw Blades. 18TPI. 2 pc Pack.
Flexible steel to resist breakage. Molybdenum steel for strength and
durability. Lasts 5X longer than carbon blades. Hardened teeth stay sharper
longer. Fits Sheffield branded and other common hacksaw frames.
ITEM #
220485
DESC
58290 HACKSAW BLADES STEEL 12IN
SP
[email protected]
220558
58291 HACKSAW BLADES STEEL 12IN
[email protected]
UOM
EA
A
EA
A
PRICE
4.28
L.ELX
4.28
L.EVX
Molybdenum alloy tool steel edge. Tough flexible high carbon steel backing.
Lasts twice as long as high-speed steel. Lasts up to ten times longer than
carbon steel. Operates 20% to 50% faster. High tooth hardness and shock
resistance.
ITEM #
455105
455113
455121
455148
455156
455164
DISSTON REMGRIT 12 IN. CARBIDE GRIT HACK SAW
BLADE
Carbide particles bonded to a steel blade. This saw cuts extremely
abrasive materials with no teeth to chip or dull. Carbide grit offers the
greatest wear and heat resistance. The blade cuts on both strokes. Ideal
for materials that other saws will not cut. Size: 12 in. x 34 in. x 0.025 in.
Dimension: 0.01 x 0.01 x 14.75 in. Item weight - 0.06 lbs.
ITEM #
523895
DESC
SP
531979
531987
531995
532002
532010
DESC
62635 HACKSAW BLD NF1018 10INX18TPI
BIMETALOY
62659 HACKSAW BLD NF1024 10INX24TPI
BIMETALOY
62706N HACKSAW BLD NF12 12INX14TPI
BIMETALOY
62723 HACKSAW BLD NF1218 12INX18TPI
BIMETALOY
62749 HACKSAW BLD NF1224 12INX24TPI
BIMETALOY
62776NHACKSAW BLD NF1232 12INX32TPI
BIMETALOY
62826N HACKSAW BLADE NF1218 BIMETAL
2/CD
62832N HACKSAW BLADE NF1224 BIMETAL
2/CD
62839 HACKSAW BLADE NF1232 BIMETAL
2/CD
62811N HACKSAW BLADE NF1018 BIMETAL
2/CD
62830 HACKSAW BLADE NF1024 BIMETAL
2/CD
SP
UOM PRICE
[email protected] EA
1.43
A
C.XYX
[email protected] EA
1.43
A
C.XYX
[email protected] EA
1.53
A
C.CRX
[email protected] EA
1.53
A
C.CRX
[email protected] EA
1.53
A
C.CRX
[email protected] EA
1.53
A
C.CRX
[email protected] CD 3.04
A
L.OLX
[email protected] CD 3.04
A
L.OLX
[email protected] CD 3.04
A
L.OLX
[email protected] CD 2.70
A
L.XRX
[email protected] CD 2.70
A
L.XRX
UOM PRICE
4.79
A
O.LXZ
GH12 HACKSAW BLADE-MEDIUM GRIT 12IN [email protected] EA
www.wallacehardware.com
1-800-776-0976 NOVEMBER
2016
61
Hand & Power Tools
Hand Saws and Replacement Blades, Hand
Saw Blades, Rod Saw Blades
ARTU TUNGSTEN CARBIDE GRITTED
ROD SAW BLADE
STANLEY COPING SAW BLADES
Saws through brick, cast metals, ceramic tile, cement backerboard,
composites, fiberglass, flagstone/slate, glass, hardened steel, stranded cable,
laminates, marble, PVC, and reinforced cement. Cuts tough materials that
other blades won't scratch. Never needs resharpening. Cuts, contours, angles,
and circles. Works in any direction - fits where other blades can't. A long
lasting edge - no teeth to dull or chip.
ITEM #
169633
DESC
01740 ROD SAW BLADE 12IN
SP
[email protected]
UOM
CD
A
PRICE
5.57
O.CXZ
Replacement blade for item #49074 coping saw. Great for irregular cuts. Cut
curves in a number of materials easily. Cuts tile, stone, marble and more. Use
wet or dry. Steel.
DESC
49094 ROD SAW BLADE 6IN
Strong and flexible blades of high carbon steel, heat treated and
tempered for strength. Medium turns in wood 1/8 inches to 1-1/2 inch
thick and soft material. 1-14/4 inches to 1/4 inches thick. 4 blades per
card.
ITEM #
588997
486159
DESC
15-061 COPING SAW BLADES 6-1/2INX15TPI
4/CD
15-059 COPING SAW BLADES 6-1/2INX20TPI
(4)
SP UOM PRICE
[email protected] CD 2.57
A
C.YOX
[email protected] CD 2.57
A
C.YOX
Cutters, Snips and Pliers, Cutters and
Nippers, Rebar Cutters
MD BUILDING ROD SAW BLADE
ITEM #
305049
Hand Saws and Replacement Blades, Hand
Saw Blades, Coping Saw Blades
SP
[email protected]
UOM
EA
A
PRICE
3.44
L.XAX
HK PORTER REBAR CUTTER AND
BENDER
Rugged contractor's tool. Shear-cut blades. Mounts easily on most flat
surfaces to enhance leverage and increase safety. Cuts and bends to 90 or
180 degrees. Approximate weight 31 lbs. 52" length. 5/8" maximum capacity.
ITEM #
094153
DESC
0590RBJN REBAR CUTTER/BNDR 52IN
SP UOM
[email protected] EA
A
PRICE
414.70
OCV.OZX
DISSTON REMGRIT 12 IN. CARBIDE GRIT ROD SAW
BLADE
Carbide particles bonded to an alloy steel rod. This saw cuts extremely
abrasive materials with no teeth to chip or dull. Carbide grit offers the
greatest wear and heat resistance. Ideal for materials that other saws will
not cut. Rod design gets into tight areas and cuts on both strokes. The
blade fits any standard hack frame. Size: 12 in. x 0.100 in. Dimension: 0.01 x
0.01 x 14.75 in. Item weight - 0.06 lbs.
ITEM #
523909
DESC
GG12 ROD SAW BLADE-MEDIUM GRIT 12IN
SP UOM
[email protected] EA
A
PRICE
4.31
L.AZX
Hand Saws and Replacement Blades, Hand
Saw Blades, Pipe Saw Blades
LENOX REPLACEMENT BLADES
10 Teeth per inch. 1 per pack/5 per box.
ITEM #
391859
20982-HSB-12 HANDSAW BLADE 12IN
SP
[email protected]
391840
20981-HSB18 HANDSAW BLADE 18IN
[email protected]
62
DESC
UOM
EA
A
EA
A
PRICE
11.84
H.YLX
15.08
Y.YAX
Cutters, Snips and Pliers, Cutters and
Nippers, Bolt Cutters
H.K. PORTER POWER LINK BOLT
CUTTERS
18 inch. The unique Powerlink geometry was
developed using advanced computer-aided design to
create a double compound action system with greater
efficiency than traditional bolt cutters. Together with special engineered HKP
center cut blades, Powerlink bolt cutters deliver superior cutting power and
industry leading blade durability. Tubular steel handles and forged Powerlinks
deliver ultimate toughness, allowing the tool to stand up in the harshest
working environments. It's the perfect solution for production facilities,
maintenance and repair operations, utilities, construction sites, oil and gas
operations, and more.
ITEM #
468673
0090MCD 18" POWER LINK BOLT CUTTER
DESC
468681
0190MCD 24" POWER LINK BOLT CUTTER
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
66.68
EX.YXZ
86.16
RE.COX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Bolt Cutters
Cutters, Snips and Pliers, Cutters and
Nippers, Cable Cutters
CRESCENT HEAVY DUTY BOLT CUTTER
STANLEY CABLE CUTTERS
General plant maintenance tool. Drop forged, precision ground, alloy tool.
Steel jaws, center cut blades cuts soft, medium or hard materials. Lockplate
keeps jaws from loosening. Steel handles with rubber grips.
The MaxSteel Line of Pliers provides up to 45% less cutting effort with up to
33% longer cutting edge. The dual durometer bi-material grips provide a
comfortable and secure grip. High leverage design for heavy usage. Drop
forged from high carbon, alloy steel for long life and durablity.
ITEM #
018430
DESC
SP
[email protected]
0390MC CUTTER CENTER CUT 36IN
UOM
EA
A
PRICE
184.40
COY.HZX
ITEM #
264644
DESC
89-874 CABLE CUTTER 8.5IN FATMAX
SP
[email protected]
UOM
EA
A
PRICE
14.52
CX.YAX
GREAT NECK MIDGET BOLT CUTTER
Forged steel construction. Short cutting edge to
accomodate chain link. Vinyl grips for firm hold. 8 inch
length.
ITEM #
207519
BC8 MINI BOLT CUTTER 8IN
DESC
SP
[email protected]
205745
BC14 BOLT CUTTER 14IN
[email protected]
205761
BC18 BOLT CUTTER 18IN
[email protected]
205788
BC24 BOLT CUTTER 24IN
[email protected]
207527
BC30 BOLT CUTTER 30IN
[email protected]
CHANNELLOCK CUTTING PLIERS
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
10.02
E.YCX
18.97
CX.YOX
23.87
CO.HEX
33.42
CY.LEX
41.00
LO.RLX
Made in the USA. Cable cutter. Cuts up to 4/0 aluminum and 2/0
copper. Not for steel or ACSR. Laser heat-treated cutting edges last
longer. Only Channellock uses a knife and anvil style cutting edge to
ensure perfect mating and superior cutting edge life. Channellock
uses a high-carbon C1080 steel for superior performance on the job
and electronic coating for ultimate rust prevention. Channellock Blue grips for
comfort.
ITEM #
396370
DESC
911 CABLE CUTTER 9.5IN
SP
[email protected]
UOM
EA
A
PRICE
31.65
LO.AXZ
OLYMPIA POWERGRIP BOLT CUTTER
Heat treated, drop forged alloy steel jaws. Heat treated handles with rubber
grips. Center cut, compound action jaws. For soft and medium hard metals
only.
ITEM #
545791
39-114 BOLT CUTTER POWERGRIP 14IN
DESC
545805
39-118 BOLT CUTTER POWERGRIP 18IN
545813
39-124 BOLT CUTTER POWERGRIP 24IN
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
34.90
LC.OEX
42.86
LE.HCX
66.68
VX.AXZ
Cutters, Snips and Pliers, Cutters and
Nippers, Rope Cutters
H.K. PORTER CABLE & WIRE ROPE
CUTTERS
DESC
0690TN CUTTER CABLE/ROPE 7-1/2
www.wallacehardware.com
Special high-leverage design. Cable-gripping shear-type jaws cut up to 4/0
aluminum, up to 2/0 soft copper, up to 100-pair, 24-gauge communication
cable. Makes clean efficient cuts. Compact, only 9-1/2" long. Can be carried in
tool pouch. Ideal for working in confined spaces. Tough, comfortable, red
plastic-dipped handles. Not designed for cutting steel or ACSR.
ITEM #
340650
DESC
63050 CABLE CUTTER HI-LEVERAGE 91/2IN
SP UOM PRICE
[email protected] EA
45.56
A
OX.OHX
KLEIN TOOLS NM CABLE RIPPER
Top-quality, pocket size cutter. Shear-cut blades. Excellent cutter for 3/16"
hard wire rope or cable. 1/2" soft wire rope or cable, piano wire, or aircraft
cable. Formed steel. Shear cut jaw design.
ITEM #
208167
KLEIN TOOLS CABLE CUTTERS
SP
[email protected]
UOM
EA
A
PRICE
40.26
OX.VZX
An easy-to-use cable ripper. Slits the outer jacket of Romex cable
(all sizes) and other nonmetallic (type NM) sheathed cable.
Measures conductor wire gauge from 8 to 14 AWG. Romex is a
registered trademark of Southwire Company.
ITEM #
384577
DESC
SP UOM PRICE
6.05
V.XOX
74017 CABLE RIPPER L- STYLE W/GAUGE F/14-6 [email protected] EA
AWG
A
1-800-776-0976 NOVEMBER
2016
63
Hand & Power Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Cable Cutters
Cutters, Snips and Pliers, Cutters and
Nippers, End Cut Nippers
KLEIN TOOLS BX AND ARMORED CABLE
CUTTER
CRESCENT PRO SERIES SOLID JOINT
END CUTTING NIPPERS
Cuts BX and 3/8" armored cable. Eliminates burrs.
Does not nick cable. Easily cuts 3/8'' flexible conduit
and #10, 12, and 14 armored cables with up to 4 wires with a couple of turns of
the handle. Depth of cut adjusts between standard MC and reduced diameter
MC.
Co-molded grips. Precision manufactured from forged alloy tool steel. Handles
with carefully designed leverage ratio to blades makes easier cutting.
Carefully designed throat clearance and rivet size. Laser hardened edges.
ITEM #
458163
DESC
SP UOM
[email protected] EA
A
53725 BX AND ARMORED CABLE CUTTER
ITEM #
117579
PRICE
49.95
OZ.OXZ
DESC
SP UOM PRICE
[email protected] EA
26.63
A
LX.CYX
728CVN NIPPERS CUTTING SLD JT END CH
GRIP 8-1/4
CHANNELLOCK LITTLE CHAMP? END
CUTTING PLIER
WISS FLIP JOINT CABLE CUTTER
3 tools in one: Cable cutter, sheath knife, and wire stripper. Cushion grip. 8 in.
4". CHANNELLOCK? end cutting pliers provide powerful
cutting capabilities on the job. Made in the USA.
ITEM #
208197
ITEM #
301312
DESC
SP UOM PRICE
25.31
A
CY.OCX
0890CSFW FLIP JOINT CABLE CUTTER, WISS [email protected] EA
Cutters, Snips and Pliers, Cutters and
Nippers, End Cut Nippers
Drop forged of high grade steel. Fine polished finish. Blue dipped plastic
comfort grips.
ITEM #
301248
The MaxSteel Line of Pliers provides up to 45% less
cutting effort with up to 33% longer cutting edge. The dual durometer bimaterial grips provide a comfortable and secure grip. High leverage design for
heavy duty usage. Drop forged from high carbon, alloy steel for long life and
durablity.
DESC
89-875 END CUTTER PLIER 6.5IN FATMAX
SP UOM PRICE
[email protected] EA
30.57
A
LZ.YZX
CHANNELLOCK END CUTTING NIPPERS
STANLEY END CUTTING PLIERS
ITEM #
264636
DESC
E42S 4" HL END CUTTING PLIER LITTLE
CHAMP
SP UOM
[email protected] EA
A
PRICE
13.02
Y.YCX
DESC
357 END CUTTER PLIER 7IN
SP
[email protected]
UOM
EA
A
PRICE
25.29
CY.XCX
GREAT NECK END NIPPER PLIER
Ergonomic double-molded grips. Precision drop forged
head for flush cutting and pulling.
ITEM #
165514
DESC
ENP6C END NIPPER PLIER 6IN
SP
[email protected]
UOM
CD
A
PRICE
11.51
R.HXZ
CRESCENT END CUTTING NIPPERS
Width of blades, clearance in threat, leverage ratio of
handles to blades, size of rivet and angle of cutting edges have been carefully
designed to produce a top quality tool. Cushion grip. Module display pack.
ITEM #
370886
DESC
727CVN NIPPERS END CUT 7-1/4IN
SP
[email protected]
UOM
CD
A
PRICE
23.52
CH.HAX
GREAT NECK END NIPPER HOBBY PLIER
Drop forged steel. Heat treated for strength and
durability. Polished head. Spring action. Vinyl grips.
ITEM #
105961
64
DESC
HEN4C END NIPPER PLIERS 4-1/2IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
4.41
L.RLX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Fence Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Fence Tools
CRESCENT MULTI-PURPOSE FENCE
TOOL
CHANNELLOCK FENCE TOOL
For wood and steel posts on ranch or farm. Heavy-duty lock-joint construction
with oval faced jaws. Start and pull point on one jaw with corrugated hammer
head on the other. Pulls staples, lifts lugs, and splices wires-wire stretcher
behind joint. Solid drop forged carbon steel blades. Heat treated, milled face
design. Non-slip coated green handles.
ITEM #
102164
DESC
SP
[email protected]
DFT10 FENCE TOOL DIAMOND 10IN
UOM
EA
A
DESC
SP
[email protected]
UOM
EA
A
PRICE
14.25
A.LCX
JMK/IIT FENCE PLIERS/WIRE CARRIER
DESC
SP
UOM PRICE
22.52
A
CO.OHX
46420 FENCE PLIER/WIRE CARRIER 10.5IN [email protected] EA
DESC
SP UOM PRICE
23.52
CE.HZX
2078901 FENCE PLIERS W/PRO TOUCH GRIPS [email protected] EA
10-1/4
A
CRESCENT HEAVY DUTY FENCE TOOL
Has corrugated hammer head, two wire cutters, two
staple grips in nose and wire grip between handles for stretching wire. Cutter
capacity: 7/32". Cushion gripped.
DESC
1936-10CVSMN FENCE TOOL HVY DUTY 10IN
www.wallacehardware.com
PRICE
35.12
LR.VXZ
6 tools in 1. Includes gas shutoff valve, pry bar to open
windows or doors, spanner wrench to loosen or tighten
hose couplings, tool steel punch to shatter safety glass, pliers with laser
treated cutting edges to cut cables and aggressive cross-hatch teeth to twist
and pull all manner of material. 26 ounces, small enough to slip in your
pocket. Overall length is 10.46". Made in USA.
ITEM #
306045
DESC
88 RESCUE TOOL LINEMEN 11IN
SP
[email protected]
UOM
EA
A
PRICE
59.30
VZ.EYX
WISS METAL WIZZ MULTI-PURPOSE
CUTTERS
ITEM #
370436
10-1/4 inch. Constructed from durable nickel chromium
steel. Machined jaws for maximum gripping strength.
Anti-pinch, non-slip ProTouch Grips provide comfort,
control, and less hand fatigue. This is the only tool you
need to work on metal and wood posts.
ITEM #
377716
UOM
EA
A
Fully chrome plated blades are serrated to prevent slipping; will cut curves or
straight. The bright yellow vinyl grips protect the hands making cutting easier.
With thumb operated closing latch.
IRWIN VISE-GRIP FENCING PLIERS
ITEM #
530360
SP
[email protected]
Cutters, Snips and Pliers, Cutters and
Nippers, Metal Cutters
Ergonomic handles for comfortable grip.
ITEM #
378895
DESC
85 FENCE TOOL PLIER 10.5IN
CHANNELLOCK RESCUE TOOL
The heavy-duty 10" Fence Pliers are chrome plated
with a polished head. The Pliers have vinyl grips and
drop forged steel.
FE10 FENCE PLIER HD 10IN
ITEM #
312789
PRICE
17.44
CO.CZX
GREAT NECK HEAVY DUTY FENCE PLIER
ITEM #
165522
Made in the USA. Fence tool. Staple starter and puller. Hammer on
jaw. Wire stretcher, splicers and 2 cutters. Channellock Blue grips
for comfort.
SP UOM PRICE
[email protected] EA
28.06
A
LC.OHX
DESC
MPC-3 METAL WIZZ CUTTERS 9IN
SP
[email protected]
UOM
EA
A
PRICE
14.81
CZ.CRX
APEX CRESCENT COMPOUND ACTION
CUTTING SET
Quick change, multi-functional blades for added
versatility. Compound action design delivers more
power with less effort. Blades coated to resist rust and corrosion. Quickrelease lock for easy one-hand operation. Dual material grips provide added
comfort and durability.
ITEM #
051713
DESC
CMTS4 SWITCHBLADE MULTI- PURPOSE
CUTTER CRESCENT
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
30.36
A
LO.ECX
65
Hand & Power Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
KLEIN TOOLS MULTI-PURPOSE
ELECTRICIAN'S TOOL
KLEIN TOOLS KATAPULT WIRE
STRIPPER/CUTTER
Two wire cutters-one at tip, the other halfway back near stripping holes
double the utility of this tool. Crimps 7-8 mm insulated and non-insulated
terminals, lugs and splices. Cuts and strips 8-22 AWG solid and 10-26 AWG
stranded wire. Cleanly shears bolts. Pivot nut adjusts tension. Left- and righthand wire-looping holes near tip. Full-sized, plastic-covered cushioned
handles for comfort. Wire cutter in nose and below pivot. Crimping
Cuts and strips 8-22 AWG wire with ease. Compound
action stripping: grip and strip via single-action squeezing motion. Precision
machined stripping holes easily remove insulation without damaging the wire.
Remove up to 1 inch in length of the insulation layer (jacket layer) in a single
step. Tension loaded wire-grip gently holds the cable while retaining cable
geometry. Recoil spring design returns tool to ready position upon cycle
completion. Cast alloy chassis with heavy-duty Ecoat finish for corrosion
resistance and durability.
ITEM #
331406
DESC
1001 ELECTRICIANS TOOL - MP 8-22 AWG
SP UOM
[email protected] EA
A
PRICE
37.72
LE.CEX
ITEM #
384569
DESC
SP UOM PRICE
44.67
A
LY.HAX
11063W WIRE STRIPPER KATAPULT 8-22 AWG [email protected] EA
CRESCENT 5-IN-1 TOOL
Stripper, wire cutter, bolt cutter, pliers and crimper all
in one scissor action tool. Plier nose permits wire pulling and looping. Cuts
bolts through No. 10, leaving perfect lead thread. Crimps insulated and noninsulated solderless terminals. Lifetime pivot bearing and red cushion handle
grips.
KLEIN TOOLS MULTI-PURPOSE WIRE
STRIPPER/CUTTER
Strips six standard wire sizes without nicking wire. Scissors action of 1/2 in. (13
mm) wide cutter makes clean cuts with little effort. Serrated nose jaws to
bend, shape, or pull wire; holes for looping wire ends. Spring-loaded for selfopening action. Comfortable, plastic-covered handles.
ITEM #
384550
DESC
1011 WIRE STRIPPER & CUTTER MULTIPURPOSE
SP UOM PRICE
[email protected] EA
19.55
A
CO.XVX
ITEM #
228605
DESC
SP
[email protected]
WS19H CUTTER/CRIMPER/STRP WIRE
UOM
EA
A
PRICE
25.80
CY.OHX
CHANNELLOCK WIRE STRIPPER
Made in the USA. Strips wire with no damage to
conductor. Crimps insulated and non insulated wire.
Cuts and strips AWG 10-22. Cuts bolt sizes: 10-24, 6-32,
8-32, 10-32, 4-40. Lean plier nose pulls and loops wire.
Precision ground cutters. Laser etched marking for
lasting indication of wire gauges. Channellock Blue grips for comfort.
ITEM #
385522
DESC
908 WIRE STRIPPER 8.25IN
KLEIN TOOLS KLEIN-KURVE WIRE
STRIPPER/CUTTER
SP
[email protected]
UOM
EA
A
Cuts, strips and loops 8-16 AWG Solid and 10-18 AWG
Stranded wire. Precision shear-type blades for clean
cuts on solid and stranded copper wire. Easy-to-read
markings on both sides. Curved handles help reach into
confined areas. Wire looping and bending holes. Coil spring provides fast selfopening action. Precision-ground stripping holes. Strong-gripping serrated
nose; for easy bending, shaping, and pulling of wire. Screw-shearing holes.
Handy closure lock for convenient storage. Double-dipped comfort grips.
10-24 AWG. Gauge wheel sets to 8 wire sizes. Wire looping
hole. Finest hardened spring steel construction with precisionground cutting edges. Double-insulated cushioned handles.
Strip solid or stranded copper or aluminum wires. Packed in
clamshell with exposed handles.
ITEM #
384585
ITEM #
819379
66
DESC
SP UOM PRICE
29.86
CY.YCX
11054 WIRE STRIPPER & CUTTER F/8-16 &10-18 [email protected] EA
AWG
A
PRICE
21.06
CE.AOX
NSI ADJUSTABLE WIRE STRIPPER
DESC
SP UOM PRICE
2.28
C.HVX
TL-ADJ5 10-24 AWG WIRE WIRE STRIPPER ADJ [email protected] EA
5IN
A
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
NSI CABLE JACKET RIPPER
KLEIN TOOLS 6" WIRE STRIPPER
CUTTER
Cuts outer jacket off flat and round non-metallic cable.
Nickel-plated finish. 6-14 AWG wire gauge.
ITEM #
819360
DESC
TL-RCR INSULATED JACKET RIPPER FOR NM
CABLES
SP UOM PRICE
[email protected] EA
1.52
A
C.CHX
Easy to read wire gauge markings on both sides.
Hardened steel with precision-ground stripping holes. Narrow nose fits in tight
places. Hole for looping wire. Yellow handles indicate solid wire. Compact
lightweight design is easy to store. New wider handle grips with cushion
ridges provide more comfort and greater torque. Spring loaded action for selfopening. Strips wire quickly, cleanly and evenly from left or right. Strips solid
wire AWG gauge
ITEM #
159875
NSI WIRE STRIPPER
DESC
SP UOM PRICE
[email protected] EA
7.07
A
E.OCX
TL-WS6 PRO 10-20 AWG PRO O WIRE
STRIPPER 6IN
UOM
EA
A
PRICE
20.36
CO.EAX
Hardened steel with precision-ground stripping holes. Narrow nose easily fits
into tight places. Strong-gripping serrated nose; for easy bending, shaping
and pulling of wire. 6-32 and 8-32 screw shearing holes. Handy closure lock.
Double dipped comfort grips. Easy to read markings on both sides. Curved
handles help reach into confined areas. Coil spring provides fast selfoperating action. Holes for looping and bending wire. Precision shear-t
ITEM #
159867
DESC
11055 WIRE STRIPPER/CUTTER
SP
[email protected]
UOM
EA
A
PRICE
29.86
CY.YCX
KLEIN TOOLS CABLE STRIPPER/CUTTER
STANLEY WIRE STRIPPER
Cuts and strips wire from 10-26 gauge. Adjustable slide
stop and hole for bending and looping wire. Comfortable vinyl grips for
comfort only. Carded.
ITEM #
328448
SP
[email protected]
KLEIN TOOLS 7-1/8" WIRE
STRIPPER/CUTTER
10-20 AWG. Pliers nose. Wire looping holes. Spring and lock.
Finest hardened spring steel construction with precisionground cutting edges. Double-insulated cushioned handles.
Strip solid or stranded copper or aluminum wires. Packed in
clamshell with exposed handles.
ITEM #
819387
DESC
11045 WIRE STRIPPER/CUTTER
DESC
SP
[email protected]
84-213 WIRE STRIPPER & CUTTER 5IN
UOM
EA
A
PRICE
5.67
V.OLX
12/2 and 14/2 stripping slots quickly remove outer
jacket of Type NM-B non-metallic-sheathed cable. Stripping holes easily
remove insulation on 12 and 14 AWG lead wire. Precision staggered blades for
square, clean cuts on solid copper wire. Narrow nose fits into tight places.
Precision shear-type blades for square, clean cuts on solid copper wire.
Curved handles help reach into confined areas. Strong-gripping serrated nose;
for easy bending, shapin
ITEM #
150924
DESC
K1412 CABLE STRIPPER/CUTTER
SP
[email protected]
UOM
EA
A
PRICE
37.36
LV.YCX
KLEIN TOOLS WIRE STRIPPER/CUTTER
KLEIN TOOLS KLEIN-KURVE NM CABLE
STRIPPER/CUTTER
Compact, lightweight wire-stripping and cutting tool.
Narrow nose fits into tight places. Hardened steel with
precision ground stripping holes. Do not use for cutting
steel wire or bolts. Spring-loaded action for self-opening. Precision-ground
stripping holes for easy removal of insulation. Easy-to-read wire gauge
markings on both sides for stripping in either direction. Black-oxide finish
resists corrosion. Color-coded handle: red indicates strande
Exclusive QTR-TURN technology quickly removes outer jacket of type NM
cable. Stripping holes easily remove insulation on 12 and 14 AWG lead wire.
Strong-gripping serrated nose for easy bending, shaping and pulling of wire.
Wire looping and bending holes. 6-32 and 8-32 screw-shearing holes. Curved
handles help reach into confined areas. Double dipped comfort grips. QTRTURN is a trademark of Stride Tools Incorporated. Handle color is yellow and
blue. 7-3/4 inches overall length.
ITEM #
331414
ITEM #
381624
DESC
11046 WIRE STRIPPER/ CUTTER (16-26 AWG
STRD)
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
21.45
A
CV.OXZ
DESC
SP UOM PRICE
36.35
A
LV.LVX
K1412-3 DUAL STRIPPER FOR 12/3 &14/3 CABLE [email protected] EA
1-800-776-0976 NOVEMBER
2016
67
Hand & Power Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
GARDNER BENDER AUTOMATIC WIRE
STRIPPER
GARDNER BENDER ALL PURPOSE
CRIMP STRIPPER
Strips 8 to 22 gauge wire.
Cuts and strips wire from 10 to 22 gauge, crimps both insulated and noninsulated terminals. Cuts bolts up to 10-24 in size.
ITEM #
727490
DESC
TL-AWS AUTOMATIC WIRE STRIPPER
SP
[email protected]
UOM
EA
A
PRICE
12.57
Y.HOX
IRWIN VISE-GRIP MULTI-TOOL STRIPPER
8 inch. Features durable nickel chromium steel
construction. The ProTouch grips provide extra comfort and reduce hand
fatigue. Induction hardened cutting edge stays sharp longer. Strips and cuts
10-22 AWG. Pliers-style nose allows pulling and looping in wire. Cuts bolts to
size and leaves perfect lead thread. Crimps insulated, non-insulated terminals.
Meets or exceeds all ANSI standards.
ITEM #
530425
DESC
SP UOM PRICE
[email protected] EA
17.64
A
CZ.EYX
2078309 MULTI TOOL
STRIPPER/CUTTER/CRIMPER
IRWIN VISE-GRIP SELF-ADJUSTING WIRE
STRIPPER
8 inch. Features durable nickel chromium steel construction. The ProTouch
grips provide extra comfort and reduce hand fatigue. Strips wire from 10-24
AWG. Adjustable stopper controls the length of the core strip. Swivel knob
micro-adjusts for gauges smaller than 20 AWG. Wire crimper crimps 10-22
AWG insulated, 10-22 AWG non-insulated and 7-9mm ignition terminals. Wire
cutter extends versatility.
ITEM #
530433
DESC
ITEM #
727431
DESC
GARDNER BENDER CIRCUIT ALERT WIRE
STRIPPER
Built-in voltage detector senses AC voltage from 50600 V AC. Audible and visual alerts indicate the presence of voltage. Cuts and
strips solid and stranded wire. Stainless steel body. Ergonomic, cushioned
handles. Cuts and rethreads bolt sizes 6-32, 8-32 and 10-32. CUL listed.
ITEM #
673226
DESC
SP UOM PRICE
[email protected] PG
29.05
A
CY.CLX
GST-55M CRCUIT ALRT WRE STRPER 1018AWG
GARDNER BENDER 8" MULTIFUNCTION
TOOL
Precision ground 8" multifunction tools. Hardened spring steel wire stripper
and cutter, Pliers and wire looper crimper, bolt cutter and rethreader.
ITEM #
720224
DESC
GS-370 WIRE STRIPPER/MULTI TOOL 1/CD
SP UOM PRICE
[email protected] EA
31.72
A
LC.LHX
2078300 SELF-ADJ OVAL/ /FLAT WIRE
STRIPPER 8IN
SP UOM PRICE
[email protected] CD 7.59
A
V.ROX
GS-366 MULTI-PURPOSE CRIMP/STRIP TOOL
1/CD
SP UOM
[email protected] CD
A
PRICE
13.52
A.LEX
GARDNER BENDER PREMIUM NM
CABLE RIPPER
GARDNER BENDER 8" LIGHT DUTY
CRIMPER
Crimp insulated or non-insulated terminals. Cuts copper and aluminum wire.
Tapered nose for cutting in tight locations. 8" length.
4 in. length. Designed for 12/2 & 14/2 NM Cable. Slits outer covering of Romex
(all sizes, both old and new) and other non-metallic (NM) sheathed cable. Wire
gauge on handle checks and strips #6 to #14 AWG.
ITEM #
654752
ITEM #
800335
68
DESC
GS-388 CRIMPER LIGHT DUTY 1/CD
SP
[email protected]
UOM
CD
A
PRICE
10.15
R.OLX
DESC
CR-1000 PREMIUM NM CABLE RIPPER
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
5.98
O.HYX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
Cutters, Snips and Pliers, Cutters and
Nippers, Wire Strippers
GARDNER BENDER PRO GRADE WIRE
STRIPPER
GARDNER BENDER 4-IN-1 STRIPPER
WITH LOCK
Stainless steel blade resists corrosion. Dual GRIP is
easier on wrists. Double bevel cutting blades for superior nick resistance. Over
molded ergonomic handles for comfort. Laser etched permanent markings.
Precision ground plier nose for gripping and pulling. Wire looping holes
designed in blade. Cuts and rethreads bolts. Limited Lifetime Warranty. 6 3/4"
in length. Symmetric handle.
These pliers that can be used to strips solid or stranded wire feature a locking
mechanism and spring return. Cut and strip copper or aluminum 10-20 AWG
solid and stranded wire. Built-in locking mechanism. Holes in the side of jaws
are intended for looping solid wire. Spring return. Use pliers to tighten or
loosen small nuts. Comfortable high-leverage handle.
ITEM #
800354
DESC
GESP-55 ARMR EDGE WRE STRPER10-18AWG
STNLSS 1/
SP UOM PRICE
[email protected] PG
27.22
A
CH.LAX
GARDNER BENDER PRO GRADE 3-IN-1
WIRE STRIPPER/CRIMPER/CUTTER
tainless steel blade resists corrosion. Dual GRIP is easier on wrists. Double
bevel cutting blades for superior nick resistance. Over molded ergonomic
handles for comfort. Laser etched permanent markings. Precision ground plier
nose for gripping and pulling. Wire looping holes designed in blade. Cuts and
rethreads bolts. Crimps insulated and non-insulated terminals and coaxial "F"
connectors. Limited Lifetime Warranty. 8 1/4" in length. Symmetric handle.
ITEM #
800355
DESC
GESP-70 ARMR EDGE WRE STRPER 8-24AWG
STNLSS 1/
SP UOM PRICE
[email protected] PG
32.92
A
LX.AYX
GARDNER BENDER TERMINAL AND CRIMPING
TOOL KIT
Contains 1 GS-70 multi-tool crimps, cuts, strips and re-threads. 99
piece terminal assortment: -24 ring terminals -20 spade connectors
-26 butt splices -9 pigtail connectors -5 pair of disconnects -5 pair of
bullet connectors -1 plastic storage case.
ITEM #
800365
DESC
SP UOM PRICE
17.29
A
CX.HRX
GK-35 TOOL KIT TERMINAL & CRIMPING 1/KIT [email protected] EA
ITEM #
800374
ITEM #
800372
DESC
GPS-3228 CUTTING PLIERS CURVED
DIAGONAL 8" 1/CD
www.wallacehardware.com
SP UOM PRICE
[email protected] CD 20.32
A
CL.RZX
SP UOM PRICE
13.04
A.CLX
GARDNER BENDER LONG NOSE WITH
CUTTER AND CRIMPER
Serrated jaws for gripping and stripping. Wire cutting station. Wire stripping
station. Crimping station. Long, rounded nose for forming and looping wires.
High leverage, comfortable grip handle. Cut copper and aluminum solid or
stranded wire. Strip 14-16 AWG wire. Crimp non-insulated terminals from 14-18
AWG.
ITEM #
800378
DESC
GS-385 LONG NOSE W/CUTTER & CRIMPER
1/CD
SP UOM PRICE
[email protected] CD 9.56
A
E.YEX
GARDNER BENDER 5 IN 1 AUTOMATIC
WIRE STRIPPER AND CRIMPER
Cut and strip 10-26 AWG copper or aluminum wire, solid or stranded. Crimps
10-22 AWG insulated terminals and 4-22 AWG non-insulated terminals. Crimp
7-8 mm ignition terminals. Comfortable high-leverage handle design.
Automatic jaw-loaded wire stripper self-adjusts.
ITEM #
800380
GARDNER BENDER ANGLED DIAGONAL
PLIERS
These pliers feature an angled head that is ideal for cutting mild steel wires,
screws, bolts and wires in tight locations. 13 degree angled head for superior
positioning and grip clearance. Diagonal cutting surface for flush cuts,
reducing exposure of sharp tips. Induction hardened blades. Machined rivet
pivot for wobble free handles. High leverage, comfortable grip handle.
Precision-machined and induction-hardened knives strengthen cutters and
provide consistent performance when cutting aluminum, copper and mediumhard steel wire.
DESC
GS-360 WRE STRPER W/LCK 10-20AWG SOLID [email protected] EA
OR STRAND
A
DESC
GS-394 AUTOMATIC STRIPPER & CRIMPER
1/CD
SP UOM PRICE
[email protected] CD 17.15
A
CX.AYX
GARDNER BENDER CIRCUIT ALERT
VOLTAGE SENSING CRIMPER/STRIPPER
Wire Range 8-20 AWG. Includes Volt Detection Module. Includes Wire Stripper.
Includes Crimper. Includes Bolt Cutter/Rethread. Includes Wire Loop Holes.
Includes Wire Cutter.
ITEM #
800391
DESC
GST-70M CRCUIT ALRT WRE STRPER 820AWG
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
34.74
A
LZ.ARX
69
Hand & Power Tools
Cutters, Snips and Pliers, HVAC Tools,
Crimpers
Cutters, Snips and Pliers, HVAC Tools, Hand
Seamers
WISS AIR CONDITIONING CRIMPERS
WISS HAND NOTCHER
5-Blade. New heating, ventilating and air conditioning tools. Finest quality
steel for sharp edge and long life. Treated industrial finish prevents rust.
Cushion grip handles for all weather comfort and grip.
Cuts 30 degree V shaped cut in sheet metal. Gives
clean notch without slipping at corners and take-off
tabs. Non-slip cushion grips for superior comfort and
control.
ITEM #
399590
DESC
WC5S CRIMPER 5-BLADE
SP
[email protected]
UOM
CD
A
PRICE
24.98
CA.AOX
ITEM #
454761
Cutters, Snips and Pliers, HVAC Tools, Hand
Seamers
DESC
SP UOM PRICE
[email protected] EA
38.88
A
LY.RHX
WHN1 HAND NOTCHER - 13/16IN THROAT
DEPTH
MALCO HAND SEAMER
Precise vee-notched depth graduations on jaws are in
1/4 increments. Jaws are drop forged, high impact
steel. Hardened steel handles resist abuse. Powerful
compound leverage design. Tool also features rust
resistant nickel plating. Non-slip vinyl grips with hand stops provide added
comfort and control.
ITEM #
002305
S2R SEAMER HAND 3IN JAWS
DESC
INFO
3" JAWS"
002356
S6R SEAMER HAND 6IN JAWS
6" JAWS"
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
66.74
VZ.VYX
94.93
RO.LYX
WISS STRAIGHT HANDLE HAND SEAMER
Cutters, Snips and Pliers, HVAC Tools,
Channel Folding Tool
WISS FOLDING TOOL
Ideal for folding channels and making longer uniform folds. Sight holes to help
assume proper depth alignment.
ITEM #
336521
WF12 FOLDING TOOL 12IN
DESC
336513
WF18 FOLDING TOOL 18IN
454753
WF24 FOLDING TOOL 24IN HVAC TOOL WISS
SP UOM PRICE
[email protected] EA
13.54
A
CX.LRX
[email protected] EA
17.05
A
CL.HYX
[email protected] EA
22.40
A
CH.CXZ
Used to bend and flatten sheet metal. Optimal handle
span for maximum power and comfortable operating
range. Non-slip cushion grips. 9" tool length. 1/4"-1-1/4"
jaw/throat depth. 3-1/4" jaw/throat width. Peg hook
packaging.
ITEM #
336440
WS3 HAND SEAMER 3IN
DESC
SP
[email protected]
336475
WS6 HAND SEAMER 6IN
[email protected]
UOM
EA
A
EA
A
PRICE
32.90
LV.RLX
51.53
OA.RAX
STANLEY STRAIGHT PATTERN SNIPS
WISS OFFSET HANDLE HAND SEAMER
Max Steel. Serrated cutting edges to prevent slippage
when cutting. Double overwind spring for longer life. High leverage,
compound cutting design cuts up to 18 gauge steel. Use also for cutting
aluminum, vinyl, siding, screening, cardboard, leather, copper and plastic.
Cushion grips. Hang hole. Exceeds ANSI standards for cutting performance
and durability.
Used to bend and flatten sheet metal. Optimal handle
span for maximum power and comfortable operating
range. Non-slip cushion grips. 9 in. tool length. 1/4-1-1/4
in. jaw/throat depth. 3-1/4 in. jaw/throat width. Peg hook
packaging.
ITEM #
336467
70
DESC
WS4 HAND SEAMER OFFSET 3IN
Cutters, Snips and Pliers, Snips, Straight
Snips
SP
[email protected]
UOM
EA
A
PRICE
43.19
OL.HOX
ITEM #
168831
DESC
14-569 STRAIGHT SNIP 7IN ALL PURPOSE
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
13.51
CX.LYX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Snips, Straight
Snips
APEX WISS STRAIGHT PATTERN SNIPS
Cuts straight and wide curves (when trimming light
gauge stock). For plumbing, heating, air conditioning
and roofing trades. Blades individually hand edged for maximum cutting
efficiency. Flat face guides tool along straight line. Blades of finest quality
steel hot drop forged for sharp edge, long life. Rust resistant blades. Cushion
handle for comfort and better grip. Cuts low carbon cold rolled steel.
ITEM #
546402
370495
370509
370525
DESC
INFO
A13N STRAIGHT PATTERN SNIPS 1-3/4" CUT"
7IN
A12N SNIPS STRAIGHT 8-1/4IN 2IN
CUT
A-11N SNIPS STRAIGHT 10IN 21/4IN CUT
A-9N SNIPS STRAIGHT 12-1/2IN
3IN CUT
SP UOM PRICE
[email protected] EA
15.62
A
CZ.AEX
[email protected] EA
19.58
A
CV.AVX
[email protected] EA
18.66
A
CO.YHX
[email protected] EA
25.11
A
CA.YOX
Cutters, Snips and Pliers, Snips, Straight
Snips
STANLEY WORKS TOOLS STRAIGHT
LONG CUT SNIPS
The Stanley FMHT73561 FatMax Straight Long Cut
Snips cuts up to 18ga (1.2mm) cold-rolled steel or 23ga
(0.7mm) stainless steel. The flush hardware helps
prevent catching on materials while cutting, and an
auto release mechanism provides for fast one handed operation. An induction
hardened cutting edge stay sharp longer (compared to non-induction
hardened blades), and the compact blade is designed for notching or trimming
heavy stock. These snips have a slip-resistant grip for comfort and control.
ITEM #
172534
*
NEW
DESC
FMHT73561 FM STRAIGHT LONG CUT
SNIPS
SP UOM PRICE
[email protected] EA
21.19
A
CR.VOX
CHANNELLOCK
GREAT NECK TIN SNIP
ITEM #
301319
608TS 8" TINNER SNIP, STRAIGHT CUT
Vinyl grip handles. Drop forged construction. Heat
treated for strength and durability. Polished heads.
301320
612TS 12" TINNER SNIP, STRAIGHT CUT
301321
610TS 10" TINNER SNIP, STRAIGHT CUT
ITEM #
165735
DESC
T10SC TIN SNIPS 10IN
SP
[email protected]
165743
T12SC TIN SNIPS 12IN
[email protected]
UOM
CD
A
CD
A
PRICE
8.70
E.CLX
12.11
H.CRX
IRWIN PROSNIP WIDE-CURVE SNIPS
Polished, high alloy, forged blades?serrated for extra
grip. Compound leverage. Positive lock safety latch. Comfortable grips. Steel
handles. Fast, easy cutting action. Tinner snips, straight cuts and wide curves.
ITEM #
361054
361062
361089
DESC
SP UOM PRICE
22007 TINNER SNIPS -FLAT BLD/WIDE CURVE [email protected] EA 14.97
7IN
A
Y.YAX
22010 TINNER SNIPS -FLAT BLD/WIDE CURVE [email protected] EA 18.58
10IN
A
CL.OAX
22012 TINNER SNIPS- FLAT BLD/WIDE CURVE [email protected] EA 23.41
12-3/4IN
A
CE.RCX
Cuts up to 22-gauge cold-rolled steel or 26-gauge stainless steel. Durable
fully-polished steel blades are forged to stay sharp for long cutting life. Laser
etched blade marking scale helps to make quick precise cuts. Large handle
rings and double dipped grips for comfort.
DESC
FMHT73992 FM 12IN TIN SNIPS
www.wallacehardware.com
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
17.02
CL.AXZ
25.49
CY.CHX
22.62
CH.XCX
Just Added
Combination snips straight pattern "maxsteel" 10 inch
Made of forged alloy (chrome-molybdenum) with
chrome plated hardware. Serrated cutting edges
prevent slippage when cutting. Slip-resistant grip.
Exceeds ANSI standards for cutting performance and
durability.
ITEM #
237486
*
NEW
DESC
SP UOM PRICE
17.80
A
CO.ACX
FMHT73571 FAT MAX 10IN TIN SNIP [email protected] EA
Cutters, Snips and Pliers, Snips, Duckbill
Snips
WISS DUCKBILL SNIPS
STANLEY WORKS FATMAX 12-IN ALLPURPOSE TIN SNIP
ITEM #
169204
DESC
SP
[email protected]
UOM
EA
A
PRICE
21.19
CR.VOX
Features the advantage of cutting moderately tight
curves to the left or right in light stock as well as cutting straight. Very popular
with the home craftsman and with professional artisans for light duty metal
cutting because of their great versatility. Cushion grip handles for comfort and
better grip.
ITEM #
029122
DESC
V10N SNIP DUCKBILL 10-1/4IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
19.94
CE.XAX
71
Hand & Power Tools
Cutters, Snips and Pliers, Snips, Duckbill
Snips
Cutters, Snips and Pliers, Snips,
Combination Snips
IRWIN PROSNIP TIGHT-CURVE SNIPS
WISS LIGHTWEIGHT ALUMINUM SNIPS
Polished, high alloy, forged blades?serrated for extra
grip. Compound leverage. Positive lock safety latch. Comfortable grips. Steel
handles. Fast, easy cutting action, tight curves and straight cuts.
Heavy duty performance with the comfort and
convenience of a lightweight tool. They will comfortably
cut light gauge sheet metal, such as cold rolled steel up to 22 gauge and
stainless steel up to 26 gauge, as well as vinyl and aluminum siding, vinyl
flooring, roofing materials, and much more. Replaceable, precision-ground
blades ensure consistent cutting performances. Quick and easy blade
replacement. Full 3" blade length for easier cutting. Extende
ITEM #
361097
361100
361119
DESC
SP UOM PRICE
15.88
CX.ARX
19.42
CO.XLX
24.15
CR.EXZ
23007 TINNER SNIP -TIGHT CURVE/DUCKTAIL [email protected] EA
BLD 7IN
A
23010 TINNER SNIPS-TIGHT
[email protected] EA
CURVE/DUCKTAIL BLD 10IN
A
23012 TINNER SNIPS-TIGHT CRV/DUCKTAIL
[email protected] EA
BLD 12-3/4
A
Cutters, Snips and Pliers, Snips,
Combination Snips
DESC
SP
[email protected]
UOM
EA
A
PRICE
29.51
LZ.LVX
WISS MULTIMASTER SNIPS
3-1/2" blade length. For right or left pattern cuts.
MC14A SNIPS ALUM 14IN
DESC
W12L SNIP LIGHT WT ALUM 1IN
Cutters, Snips and Pliers, Snips, Aviation
Snips
MALCO TOOLS COMBINATION METAL
SNIPS
ITEM #
534358
ITEM #
102393
SP
[email protected]
UOM
EA
A
PRICE
54.48
OR.OLX
The Wiss MultiMaster combines the long cut of tinners
snips with the strength of compound action. This compound action multiplies
the force of the hand by five times. It is great for making long, fast cuts in
several types of material including: paper, plastic, sheet metal, aluminum,
vinyl siding, and screening. The Wiss MultiMaster cuts up to 20 gauge steel.
Features non-slip, serrated jaws and non-slip textured grips. 10-1/2", 3" cutting
capacity blades.
ITEM #
330582
MALCO COMBINATION CUT ALUMINUM
SNIP
DESC
M300 MULTI-MASTER SNIP
SP
[email protected]
UOM
EA
A
PRICE
18.59
CO.YAX
Original andy classic handle feel. Easy blade
replacement. Full 3" cutting length. Pressure fit blades now standard.
Aluminum handed snip signals the return of a classic. Snug rounded handle
loops that characterized the original are now complimented by new pressure
fit, non riveted, inset blades.
CHANNELLOCK AVIATION SNIP
ITEM #
002291
Cuts straight and left curves. Easiest in left hand. Cut Legnth 1-1/4 inch. Cuts
18ga cold rolled steel and 22ga stainless.
534293
DESC
MC12A SNIP COMBO ALUM
12IN
MC12RB BLADES FOR MC12
INFO
9" LENGTH
SP UOM PRICE
[email protected] EA
49.14
A
OL.HRX
[email protected] EA
25.15
A
CR.HZX
ITEM #
301315
DESC
610AL 10" AVIATION SNIP, STANDARD, LEFT
CUT
SP UOM PRICE
[email protected] EA
20.44
A
CE.OHX
WISS LIGHTWEIGHT ALUMINUM
HANDLE SNIP
22 gauge low carbon steel. Half the weight of
comparable forged snips. Sleek head design allows
material to easily flow over snip while cutting. Handle
rings designed for added comfort and greater cutting leverage. Easy and quick
blade replacement. Blade length 3-1/4 in. Peg hook packaging.
ITEM #
336505
72
DESC
W14L SNIP LT WEIGHT ALUMINUM HANDLE
14IN
SP UOM PRICE
[email protected] EA
35.89
A
LR.YVX
CHANNELLOCK AVIATION SNIPS
10". Cuts wide left and right, curved and straight. Grips designed for durability
and comfort. High tensile steel handles. 8:1 Compound Action for maximum
cutting power with minimum effort. Forged alloy steel blades for durability and
strength. Long lasting double overwind spring. Can be used in either hand.
Cut Length 1-3/8 inch. Cuts 18ga cold rolled steel and 22ga stainless.
ITEM #
301316
DESC
610AS 10" AVIATION SNIP, STANDARD,
STRAIGHT CUT
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
20.44
A
CE.OHX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Snips, Aviation
Snips
Cutters, Snips and Pliers, Snips, Aviation
Snips
CHANNELLOCK AVIATION SNIPS
DEWALT AVIATION SNIPS
10". Cuts straight and right curves. Grips designed for durability and comfort.
High tensile steel handles. 8:1 Compound Action for maximum cutting power
with minimum effort. Forged alloy steel blades for durability and strength.
Long lasting double overwind spring. Easiest in right hand. Cut Length 1-1/4
inch. Cuts 18ga cold rolled steel and 22ga stainless.
Right pouch. Patented flush hardware allows smooth
access from pouch. 25% larger pivot bolt than leading
competitors for longer tool life. Internal locking mechanism with auto release.
Forged chrome molybdenum alloy is stronger than WISS cast steel snips (30%
- 50% stronger) providing longer cutting life.
ITEM #
301317
ITEM #
381101
DESC
SP UOM PRICE
20.44
CE.OHX
610AR 10" AVIATION SNIP, STANDARD, RIGHT [email protected] EA
CUT
A
CHANNELLOCK BULLDOG AVIATION
SNIPS
10". Forged alloy steel blades for durability and strength. Can be used in either
hand. Cuts straight on heavy duty material, thick or multiple layers, seams,
notch cuts, etc. Precision serrations for clean material finish and optimum
cutting performance. 8:1 Compound Action for maximum cutting power with
minimum effort. Long lasting double overwind spring. High tensile steel
handles. Serrated blades. Grips designed for durability and comfort. Cut
length: 7/8 inch. Cuts 16ga cold rolled steel, and 18ga stainless.
ITEM #
301318
DESC
DESC
SP UOM PRICE
14.25
A
CX.HEX
DWHT70281 AVIATION SINGLE SNIP -RIGHT [email protected] EA
STANLEY FATMAX STRAIGHT CUT
AVIATION SNIPS
Cuts up to 18ga (1.2mm) cold-rolled steel or 22ga (0.7mm) stainless steel. Auto
Release Mechanism for fast one handed operation. Induction hardened cutting
edge stays sharp longer 1/4" blade markings for quick precise cuts.
ITEM #
240513
DESC
SP UOM PRICE
[email protected] EA
17.80
A
CO.EYX
FMHT73756 FM STRAIGHT CUT AVIATION
SNIPS
SP UOM PRICE
[email protected] EA
21.13
A
CE.AYX
610BS 10"AVIATION SNIP BULLDOG SNIP
STRAIGHT CU
WISS STRAIGHT CUT AVIATION SNIP
DEWALT AVIATION SNIPS
Left pouch. Patented flush hardware allows smooth
access from pouch. 25% larger pivot bolt than leading competitors for longer
tool life. Internal locking mechanism with auto release. Forged chrome
molybdenum alloy is stronger than WISS cast steel snips (30% - 50% stronger)
providing longer cutting life.
ITEM #
381098
DESC
SP
UOM
DWHT70280 AVIATION SINGLE SNIP -LEFT [email protected] EA
A
Left/right/straight cutting action. 10-1/2 in. overall
length. Safety latch, ergonomic handle design to
reduce hand fatigue.
ITEM #
370500
DESC
M3X SNIP AVIATION EDGE STRAIGHT CUT
SP UOM
[email protected] EA
A
PRICE
21.41
CR.OEX
PRICE
14.25
CX.ARX
WISS METALMASTER COMPOUND
ACTION SNIP
STANLEY AVIATION SNIPS
Max steel. Serrated cutting edges to prevent slippage
when cutting. Double overwind spring for longer life.
High leverage, compound cutting design cuts up to 18
gauge steel. Use also for cutting aluminum, vinyl siding, screening, cardboard,
leather, copper and plastic. Chrome plated hardware. Forged alloy steel
construction for strength. One handed handle. Slip-resistant bi-material palm
cushion grip. Hang hole in handle. Interactive "Try Me" packaging.
ITEM #
169080
DESC
14-563 AVIATION SNIP STRAIGHT CUT
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
11.72
A.ALX
Blade design for left and straight cuts. Wear resistant molybdenum steel
blades are made to stand up to the tremendous pressures created by the
compound lever action. Compound cutting action allows the cutting of
material up to 18 gauge carbon steel. Non-slip grips provide superior control
and comfort. 1-3/8-Inch Cut Capacity 9-3/4-Inch Straight and Left Cut
Compound Action Snip. Red.
ITEM #
370452
M-1R SNIP METALMASTER 9-3/4IN L
DESC
SP
[email protected]
370460
M-2R SNIP METALMASTER 9-3/4IN R
[email protected]
370479
M-3R SNIP METALMASTER 9-3/4IN S
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
EA
A
PRICE
18.56
CO.YEX
18.56
CO.YEX
18.56
CO.YEX
73
Hand & Power Tools
Cutters, Snips and Pliers, Snips, Aviation
Snips
Cutters, Snips and Pliers, Snips, Offset Snips
IRWIN OFFSET SNIPS
GREAT NECK AVIATION SNIP
Vinyl grip handle. Drop forged, heat treated chrome
vanadium. Carded.
ITEM #
578568
DESC
TA10L AVIATION SNIP LEFT CUT
SP
[email protected]
578576
TA10R AVIATION SNIP RIGHT CUT
[email protected]
578584
TA10S AVIATION SNIP STRAIGHT CUT
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
9.42
E.VAX
9.42
E.VAX
9.42
E.VOX
Hot Drop forged steel blades for a sharper cutting
edge and greater strength. The ergonomically designed ProTouch grips and
long-life spring increase the leverage and optimize each cut. Equipped with
multiple pivot pins that provide compound cutting action. Also cuts at a
sharper angle, distancing your hands from sharp, jagged work surfaces.
ITEM #
305944
DESC
2073212 PRO OFFSET SNIPS 9IN CUTS STRG
& ANGLE
SP UOM PRICE
[email protected] EA
20.50
A
CO.YOX
IRWIN VISE-GRIP OFFSET SNIPS
IRWIN UTILITY SNIPS
Compound cutting action with textured grips and E-Z
close latch. Great for cutting sheet metal, vinyl, plastic, rubber and many other
applications. Multi-purpose snips with compound cutting leverage. Pro-Touch
Grips provide superior comfort, resists twisting.
ITEM #
361011
361038
372455
DESC
2073111 AVIATION SNIPS
10IN CUTS LEFT & STRG
2073112 AVIATION
SNIPS 10IN CUTS RIGHT
& STRG
2073113 AVIATION SNIPS
10IN CUTS STRG & WIDE
INFO
SP UOM
RED GRIPS CUTS LEFT [email protected] EA
OR STRAIGHT
A
GREEN GRIPS CUTS
[email protected] EA
RIGHT OR STRAIGHT
A
PRICE
18.31
CL.LXZ
18.31
CL.VZX
UTILITY SNIP YELLOW [email protected] EA
GRIPS
A
18.31
CL.LXZ
Hot-drop forged steel blades are stronger, with a
sharper cutting edge. Serrated cutting edges hold
material for reduced slippage and longer cuts. Multiple
pivot pins and a long-life spring provide lasting
compound cutting leverage to deliver more cutting force. Pro-Touch Grips
provide superior comfort and resist twisting. E-Z close latch keeps snips
closed when not in use. These snips cut tight circles and tight curves that
rotate to the left.
ITEM #
530530
DESC
SP UOM PRICE
[email protected] EA
20.79
A
CO.YOX
2073211 SNIPS SL OFFSET STRAIGHT AND
LEFT
IRWIN VISE-GRIP EXTRA CUT MULTISNIPS
STANLEY AVIATION SNIPS
ITEM #
169243
*
NEW
169251
NEW
DESC
SP UOM PRICE
17.80
CO.OLX
17.80
CO.ACX
FMHT73557 FM RIGHT CUT AVIATION [email protected] EA
SNIPS
A
FMHT73755 FM LEFT CUT AVIATION
[email protected] EA
SNIPS
A
Cutters, Snips and Pliers, Snips, Offset Snips
WISS OFFSET SNIPS
The new offset blades keep the material away from
hands. Color coded for easy blade identification; red grips circle left, green
grips circle right.
ITEM #
301582
M-6R 9-1/4IN L METALMASTER SNIP
SP
[email protected]
301590
M-7R 9-1/4IN R METALMASTER SNIP
[email protected]
74
DESC
UOM
EA
A
EA
A
PRICE
21.55
CR.LXZ
21.86
CR.ORX
11-3/4 inch. Compound cutting action with textured grips and E-Z close latch.
Great for cutting sheet metal, vinyl, plastic, rubber and many other
applications. Multi-purpose snips with compound cutting leverage. Pro-Touch
Grips provide superior comfort, resists twisting.
ITEM #
530549
DESC
21304ZR SNIPS 304 11-3/4IN EXTRACUT
SP UOM
[email protected] EA
A
PRICE
21.13
CV.CHX
Cutters, Snips and Pliers, Snips, Turbo
Shears
MALCO TURBO SHEARS HD
Attaches to cordless (14.4V or higher) or corded drill.
Cam driven accessory allows user to cut 18 gauge
galvanized steel and most other common metals. Wider
oepning jaws navigate over profiles and through seams.
ITEM #
193771
DESC
TSHD SHEAR TURBO HD F/DRILLS
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
132.36
AZ.LVX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Snips, Turbo
Shears
Cutters, Snips and Pliers, Pliers, Diagonal
Cutting Pliers
MALCO TURBO SHEARS
The rugged but inexpensive Turboshear cuts straight
and to the left and makes fast cuts in material thickness
up to 20-gauge galvanized steel. Cutting applications
include both ferrous and non-ferrous sheet metals,
metal roofing/building panels, vinyl, steel mesh,
ductwork, even the thick metal of furnace jackets, equipment enclosures or
automotive body panels. An offset design keeps both hands away from work
surface.
ITEM #
192953
DESC
SP
[email protected]
TS1 SHEAR TURBO METAL F/DRILLS
UOM
EA
A
PRICE
71.77
VH.AVX
STANLEY TOOLS FATMAX ANGLED
CUTTING PLIERS
High-leverage pivot design uses less energy to cut than traditional cutting
pliers. Induction hardened cutting jaws engineered to stay sharp longer than
non-induction hardened jaws. Angled head design cuts flush against any
surface. Forged high-quality carbon steel provides a durable cutting edge.
Meets ANSI specifications. Slip-resistant bi-material handle for a comfortable
grip. Limited Lifetime Warranty.
ITEM #
264571
264652
DESC
SP UOM PRICE
[email protected] EA
14.03
A
CX.HXZ
[email protected] EA
15.75
A
CL.CZX
89-861 ANGLED DIAGONAL CUTTING PLIER
8IN FATMAX
89-862 ANGLED DIAGONAL CUTTING PLIER
10IN FATMX
NSI DIAGONAL CUTTING PLIERS
6-3/8 in. Designed and Shaped For Wire Cutting In
Light Places. Wire Cutter Nose (Cu/Al). Heat-Treated
Drop-Forged Steel. Cushioned Insulated Handles.
Cutters, Snips and Pliers, Pliers, Pipe
Crimpers
ITEM #
835579
DESC
TL-DC DIAGONAL CUTTERS 6-1/2IN
WISS 5-BLADE CRIMPER
For crimping round metal pipe to create a male fitting.
Crimps heavier gauge pipe up to 22 gauge galvanized.
Non-slip cushion grips for superior comfort and control.
10 in. length.
ITEM #
336432
DESC
WC5L CRIMPER 5-BLADE 1-5/8IN
SP
[email protected]
UOM
EA
A
PRICE
25.66
CY.LCX
4 inch. Drop forged steel. Heat treated for strength and
durability. Polished head. Spring action. Vinyl grips.
DESC
HLD4C DIAGONAL PLIERS 4IN
www.wallacehardware.com
SP
[email protected]
PRICE
6.46
V.YRX
Used for cutting hard wire. Machined jaws, induction hardened cutting edge.
DESC
84-027 DIAGONAL PLIER 6IN BI-MATERIAL
SP UOM
[email protected] EA
A
PRICE
5.67
V.OLX
STANLEY TOOLS FATMAX DIAGONAL
CUTTING PLIERS
Forged high-quality carbon steel provides a durable cutting edge. Meets ANSI
specifications. Slip-resistant bi-material handle for a comfortable grip. Limited
Lifetime Warranty. Slim head design allows access into tight spaces. Induction
hardened cutting jaws engineered to stay sharp longer than non-induction
hardened jaws.
GREAT NECK MINI DIAGONAL CUTTING
PLIERS
ITEM #
105988
UOM
EA
A
STANLEY BI-MATERIAL DIAGONAL
PLIERS
ITEM #
125393
Cutters, Snips and Pliers, Pliers, Diagonal
Cutting Pliers
SP
[email protected]
UOM
CD
A
PRICE
4.41
L.EYX
ITEM #
264598
264563
DESC
89-858 DIAGONAL CUTTING PLIER 6.5IN
FATMAX
89-859 DIAGONAL CUTTING PLIER 7.5IN
FATMAX
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
11.00
A
A.VXZ
[email protected] EA
12.10
A
Y.OXZ
75
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Diagonal
Cutting Pliers
CRESCENT DIAGONAL CUTTING PLIERS
9" ProSeries. Compound Action. Co-molded grips. Compound leverage design
that increases cutting power by 50%. Chrome vanadium steel. Heat treated
joint rivet for smooth and consistent operation. Induction hardened edges for
long cutting life. 1/3 lighter than standard pliers, reduces fatigue.
ITEM #
210234
DESC
PS5429C PLIER DIAG CA 9IN
SP
[email protected]
UOM
EA
A
PRICE
21.25
CR.XHX
STANLEY TOOLS DIAGONAL PLIERS
Fixed joint design used for cutting. Individually
sharpened blades cut soft and hard wire. Oil-resistant dipped handle allows
for a comfortable grip. Drop-forged steel is strong and durable. Meets ANSI
specifications.
ITEM #
264717
264741
264768
DESC
SP UOM PRICE
5.30
A
V.XZZ
84-105 DIAGONAL CUTTING PLIER 6IN FATMAX [email protected] EA 6.56
A
V.YEX
84-108 DIAGONAL CUTTING PLIER 7IN
[email protected] EA
7.40
A
E.RLX
84-104 DIAGONAL CUTTING PLIER 5IN FATMAX [email protected] EA
6" diagonal cutting solid joint pliers. Designed for
general wire cutting, flush cutting or in confined spaces. Standard jaw.
Electronically induction hardened and hand-honed. Long cutting edges for
harder wires. Round joint design. Made of drop-forged alloy steel. Individually
tested for strength and cutting ability. Polished head. Red non-slip cushion
handle grips. 13/16" nose length. 3/4" nose width. 7/16" maximum thickness. 6"
length.
DESC
SP UOM
[email protected] CD
A
9336CVN PLIER DIAG CUSHION GRIP 6IN
KLEIN TOOLS HIGH-LEVERAGE
DIAGONAL CUTTING PLIERS
Angled head design for easy work in confined spaces. High-leverage design.
Rivet is closer to the cutting edge for 36% greater cutting power than other
plier designs.
ITEM #
331295
DESC
D248-8 DIAGONAL CUTTING PLIERS 8IN
SP UOM
[email protected] EA
A
PRICE
39.77
LR.ECX
KLEIN TOOLS DIAGONAL CUTTING
PLIERS
High-leverage design provides a 36% greater mechanical cutting and gripping
advantage than regular 7" and 8" heavy-duty diagonal cutters. Standard-bevel
cutting knives. Plastic-dipped handles hand form style. Overall length is 8",
13/16" jaw length, 1-3/16" jaw width, 7/16" jaw thickness.
ITEM #
159883
DESC
SP UOM PRICE
[email protected] EA
38.23
A
LE.VYX
D228-8 DIAGONAL CUTTING PLIERS 81/16IN
KLEIN TOOLS HEAVY-DUTY ALLPURPOSE DIAGONALCUTTING PLIERS
CRESCENT DIAGONAL CUTTING PLIERS
ITEM #
500658
Cutters, Snips and Pliers, Pliers, Diagonal
Cutting Pliers
6" custom US-made tool steel. Induction hardened cutting knives for long life.
Hot-riveted joint ensures smooth action and no handle wobble. Short jaws and
beveled cutting edges permit close cutting of wire. Plastic-dipped handles for
comfort and ease of identification. Heavier design for all-purpose use.
Tapered nose for easy working in confined areas.
ITEM #
384968
DESC
D252-6 PLIER DIAGONAL CUTTING TAPERED
NOSE 6IN
SP UOM PRICE
[email protected] EA
40.38
A
LR.YLX
PRICE
15.07
CZ.ORX
IRWIN VISE-GRIP DIAGONAL CUTTING
PLIERS
Designed to cut heavy gauge wire with ease. Heavy
duty drop-forged steel, durable cutting edge with red vinyl cushion grips.
Irwin Vise-Grip Diagonal Cutting Pliers
6 inch. Features durable nickel chromium steel construction. The ProTouch
grips provide extra comfort and reduce hand fatigue. Induction hardened
cutting edge stays sharper, longer. Meets or exceeds ANSI specifications.
ITEM #
370894
ITEM #
530409
CRESCENT DIAGONAL CUTTING PLIERS
76
DESC
5427CVN PLIERS DIAGONAL CUT 7IN
SP
[email protected]
UOM
EA
A
PRICE
18.71
CV.XCX
DESC
2078306 DIAGONAL CUTTING PLIER 6IN
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
15.14
CX.CEX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Diagonal
Cutting Pliers
Cutters, Snips and Pliers, Pliers, Diagonal
Cutting Pliers
IRWIN VISE-GRIP DIAGONAL CUTTING
PLIERS
CHANNELLOCK LITTLE CHAMP? SIDE
CUTTING PLIER
Durable nickel chromium steel construction. ProTouch grips provide extra
comfort and reduces hand fatigue. Induction hardened cutting edge stays
sharper, longer. Meets or exceeds ANSI specifications.
4". The CHANNELLOCK? side cutting plier offers
professionals clean, precise cuts. Made in the USA.
ITEM #
298751
DESC
SP UOM
[email protected] EA
A
2078308 DIAGONAL CUTTING PLIERS 8IN
PRICE
19.64
CO.XYX
DESC
350540
D65C DIAGONAL CUTTING PLIER 6-1/2IN
165506
D75C DIAGONAL PLIER 7-1/2IN
SP UOM
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
PRICE
5.50
O.LVX
6.66
O.YLX
6.93
V.XOX
Made in the USA. High leverage. Lap joint diagonal. Laser heattreated cutting edges last longer. Only Channellock uses a knife and
anvil style cutting edge to ensure perfect mating and superior cutting
edge life. Channellock uses a high-carbon C1080 steel for a superior
performance on the job and electronic coating for ultimate rust
prevention. Channellock Blue grips for comfort.
DESC
338 DIAG LAP JOINT PLIER 8IN
ITEM #
168424
58499 DIAGONAL CUT PLIER 6-1/2IN
DESC
SP
[email protected]
168432
58500 DIAGONAL CUT PLIER 7-1/2IN
[email protected]
UOM
EA
A
EA
A
PRICE
6.05
O.ECX
7.52
V.VLX
HOWARD BERGER DIAGONAL PLIERS
CHANNELLOCK CUTTING PLIERS
ITEM #
164208
SP UOM PRICE
[email protected] EA
27.99
A
LC.XVX
Sheffield Easy Cut Diagonal Pliers. Hardened and
tempered for easy cutting. Drop forged steel for strength and durability.
Chrome finished to resist rust. Ergonomic rubber grip overlay with Sheffield
Oval-Grip pattern.
Ergonomic double-molded grips. Extra sharp honed
cutting edges. Grooved joints. Top quality drop forged
construction.
D55C DIAGONAL PLIER 5-1/2IN
DESC
E41S 4" HL DIAG CUTTING PLIER LITTLE
CHAMP
SHEFFIELD EASY CUT DIAGONAL PLIERS
GREAT NECK DIAGONAL CUTTING PLIER
ITEM #
165492
ITEM #
301311
SP
[email protected]
UOM
EA
A
PRICE
23.91
CH.YAX
Heavy-duty drop forged chrome alloy steel fully polished. Tapered
nose, stand and bevel edges. Insulated cushion grips.
ITEM #
236918
95503 DIAGONAL PLIER 6-1/2IN
DESC
SP
[email protected]
236926
95504 DIAGONAL PLIER 8IN
[email protected]
UOM
EA
A
EA
A
PRICE
3.69
L.CYX
5.79
O.VOX
Cutters, Snips and Pliers, Pliers, Long Nose
Pliers
CHANNELLOCK DIAGONAL CUTTING
PLIERS
NSI LONG NOSE PLIERS
Not all cutting edges are the same -- only
CHANNELLOCK? uses precision machined knife and
anvil style cutting edges to ensure perfect mating and
superior cutting edge life. The CHANNELLOCK? knife and anvil cutters ensure
proper cutting edge alignment, resulting in a clean cut every time. Most
manufacturers use two sharp edges which can become misaligned, losing
their cutting effectiveness. Experience the difference for yourself.
ITEM #
537926
DESC
E337 HL DIAGONAL CUTTING PLIER 7IN
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
23.72
CH.AVX
For long reach twisting and positioning wires in tight
places. Wire cutter (CU/AL). Non-insulated crimping
stations. Heat-treated forged steel, construction with
precision ground edges for cutting copper and aluminum. Double insulated
cushioned handles.
ITEM #
835587
377511
DESC
SP UOM PRICE
[email protected] EA
6.88
A
E.LAX
PSX200C LONG NOSE PLIER CRESCENT X2 [email protected] EA
20.10
A
CE.XYX
TL-LNP LONG NOSE PLIERS 6-1/2IN
1-800-776-0976 NOVEMBER
2016
77
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Long Nose
Pliers
Cutters, Snips and Pliers, Pliers, Long Nose
Pliers
STANLEY LONG NOSE PLIERS MAXSTEEL
CRESCENT LONG NOSE PLIERS PROSERIES
The MaxSteel line of pliers provides up to 45% less cutting effort with up to a
33% longer cutting edge. The dual durometer bi-material grips provide a
comfortable and secure grip. Slim design for reaching into tight places. High
leverage design for heavy usage. Drop forged from high carbon, alloy steel for
long life and durabilty.
Co-molded grips. Compound leverage design that increases cutting power.
Chrome vanadium steel. Heat treated joint rivet for smooth consistent
operation. Induction hardened edges for long cutting life. 1/3 lighter than
standard pliers.
ITEM #
264520
264555
DESC
SP UOM PRICE
89-869 LONG NOSE PLIERS W/CUTTER 6.5IN [email protected] EA
11.52
A
A.AXZ
89-870 LONG NOSE PLIERS 8IN FATMAX
[email protected] EA
12.40
A
Y.OHX
ITEM #
210277
DESC
PS6549C PLIER LONG NOSE CA 9IN
SP
[email protected]
UOM
EA
A
PRICE
21.19
CR.XRX
KLEIN TOOLS 6" STANDARD LONGNOSE PLIERS - SIDE-CUTTING
STANLEY LONG NOSE PLIERS
Strong, tempered alloy steel pliers for wire loop
forming and gripping fine work. Tapered jaws for
working in tight places. Side cutting feature has finely honed edges?cuts most
types of wire. Precision balance with bonded vinyl grips for proper feel.
ITEM #
323888
DESC
84-102 LONG NOSE PLIERS 8IN
SP
[email protected]
UOM
EA
A
PRICE
8.18
R.LZX
Custom US-made tool steel. Hot-riveted joint ensures smooth action and no
handle wobble. Slim head design for working in confined areas. Plastic-dipped
handles for comfort and ease of identification. Journeyman style available for
some models. The state-of-the-art, dual-material handles provide a better grip
without sacrificing tool strength or durability. Induction hardened, long-lasting
cutting knives. Knurled jaws for sure wrapping and looping. Curved handles
provide greater tool control.
ITEM #
384593
DESC
SP UOM PRICE
33.55
LZ.OHX
D203-6 LONG NOSE PLIERS SIDE CUTTERS 6- [email protected] EA
5/8IN
A
STANLEY LONG NOSE PLIERS
IRWIN VISE-GRIP LONG NOSE PLIERS
Forged steel construction. Hand ground cutting edges.
Rust-resistant finish. Double dipped handles for comfortable use. Machined
jaws for gripping. Chrome-nickel steel for tough, durable, hardened cutting
edge.
6 inch. Features durable nickel chromium steel
construction. The ProTouch grips provide extra comfort and reduce hand
fatigue. Machined jaws provide maximum gripping strength. Induction
hardened cutting edge stays sharp longer. These pliers feature a superior long
reach design for work in confined areas.
ITEM #
264911
DESC
84-101 LONG NOSE PLIER 6IN
SP
[email protected]
UOM
EA
A
PRICE
6.51
V.YEX
ITEM #
530220
DESC
2078216 LONG NOSE PLIERS 6IN
SP
[email protected]
UOM
EA
A
PRICE
15.14
CX.CEX
APEX CRESCENT LONG NOSE PLIER
VISE-GRIP LONG NOSE PLIERS
6-5/8 in. Designed for reaching confined areas. Polished head. Red, non-slip,
cushion-grip handles.
Durable nickel chromium steel construction. Pro Touch grips provide extra
comfort and reduces hand fatigue. Induction hardened cutting edge stays
sharper, longer. Machined jaws for maximum gripping strength. Meets or
exceeds ANSI specifications.
ITEM #
398535
340898
78
DESC
6546CVSMLN SOLD JT PLIER LONG NOSE
SIDE CUT 6-5/8
D203-8N LONG NOSE PLIERS -HD SIDE
CUTTING 8-7/16
SP UOM PRICE
[email protected] CD 19.65
A
CV.AYX
[email protected] EA
45.31
A
OX.LXZ
ITEM #
298743
DESC
2078218 LONG NOSE PLIERS 8IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
16.95
CZ.OXZ
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Long Nose
Pliers
IRWIN VISE-GRIP END CUTTING PLIERS
8 inch. Features durable nickel chromium steel construction. The ProTouch
grips provide extra comfort and reduce hand fatigue. Induction hardened
cutting edge stays sharp longer. Wide throat clearance allows semi-flush
cutting of nails and rivets.
ITEM #
530352
2078318 END CUTTER 8IN
DESC
SP
[email protected]
117544
6547CVN CHAIN NOSE PLIER 7-1/2IN
[email protected]
UOM
EA
A
EA
A
PRICE
21.30
CV.ERX
22.78
CH.LHX
Cutters, Snips and Pliers, Pliers, Long Nose
Pliers
CHANNELLOCK LITTLE CHAMP? LONG
NOSE PLIER
5" with side cutter. CHANNELLOCK? Long Nose Pliers
are engineered to operate in tight spaces. A narrow nose profile provides
extra precision and serrated jaws allow for maximum grip. Made in the USA.
ITEM #
301313
DESC
SP UOM PRICE
31.78
A
LO.YXZ
E47S 5" HL LONG NOSE PLIER LITTLE CHAMP [email protected] EA
CHANNELLOCK LITTLE CHAMP? SNIPE
NOSE CLIPPER
SHEFFIELD SECURE GRIP 6 1/2'' LONG
NOSE PLIERS
6". CHANNELLOCK? Long Nose Pliers are engineered
to operate in tight spaces. A snipe nose profile provides extra precision in
confined spaces. Made in the USA.
Sheffield Secure Grip 6 1/2'' Long Nose Pliers. Precision machined and heat
treated jaws for secure grip. Hardened and tempered for easy cutting. Drop
forged steel for strength and durability. Chrome finished to resist rust
Ergonomic rubber grip overlay with Sheffield Oval-Grip pattern.
ITEM #
221120
530484
DESC
58502 LONG NOSE PLIERS 6-1/2IN
2078702 2PC PLIER SET-6" SLP JNT + 6IN
LONG NOSE
SP UOM PRICE
[email protected] EA
5.95
A
O.VRX
[email protected] EA
20.41
A
CO.RAX
ITEM #
301314
DESC
SP
380032
DESC
DESC
SP
[email protected]
HLS4C LONG NOSE CUT PLIER 4-1/2IN
318 LONG NOSE PLIER HVY DUTY SIDE
CUTTER 8.38IN
5 1/2" length. Ergonomic double-molded grips.
Precision drop forged head.
CHANNELLOCK LONG NOSE PLIERS
Made in the USA. With side cutter. Crosshatch pattern on jaws grips
work tightly. Only Channellock uses a knife and anvil style cutting
edge to ensure perfect mating and superior cutting edge life. Laser
heat-treated cutting edges last longer. Channellock uses high-carbon
C1080 steel for superior performance on the job and electronic
coating for ultimate rust prevention. Channellock Blue grips for comfort.
ITEM #
301353
DESC
326 LONG NOSE PLIER W/CTR 6IN
www.wallacehardware.com
SP
[email protected]
PRICE
7.83
V.REX
GREAT NECK LONG NOSE PLIER
SP UOM PRICE
[email protected] EA
24.30
A
CA.LHX
[email protected] EA
30.67
A
LO.XRX
317 LONG NOSE PLIER 8IN
UOM
CD
A
Long nose, side cutting pliers. Made of drop forged
steel with plastic coated handles. Measures 4-1/2
inches and is excellent for hobby and electronics work.
CHANNELLOCK LONG NOSE PLIERS
ITEM #
301442
A
PRICE
29.21
LC.YHX
GREAT NECK LONG NOSE PLIERS
ITEM #
106038
Slender, perfectly mated jaws with no side wobble
provides a firm grip on fine work in tight places. Sharp,
hand honed, side cutters. Beautiful, high-polished
forged steel. Blue dipped plastic comfort grips.
UOM
E50S 6" SNIPE NOSE PLIER LITTLE CHAMP [email protected] EA
UOM
EA
A
PRICE
23.67
CH.HYX
ITEM #
165530
LN55C LONG NOSE PLIER 5-1/2IN
DESC
SP
[email protected]
350559
LN65C LONG NOSE PLIER 6-1/2IN
[email protected]
165549
LN8C LONG NOSE PLIER 8IN
[email protected]
UOM
CD
A
CD
A
CD
A
PRICE
5.21
O.XOX
5.75
O.OAX
9.03
E.LXZ
SHEFFIELD SECURE GRIP LONG NOSE
PLIERS.
Sheffield Secure Grip 6 1/2'' Long Nose Pliers. Precision machined and heat
treated jaws for secure grip. Hardened and tempered for easy cutting. Drop
forged steel for strength and durability. Chrome finished to resist rust
Ergonomic rubber grip overlay with Sheffield Oval-Grip pattern.
ITEM #
168475
DESC
58503 LONG NOSE PLIER 8IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
7.59
V.VRX
79
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Long Nose
Pliers
HOWARD BERGER LONG NOSE PLIERS
STANLEY LONG NOSE BENT PLIERS MAXSTEEL
Heavy-duty drop-forged chrome alloy steel fully polished. 1/2"
sharpened area for wire cutting. Durable cushioned matte grips.
Spring loaded handle.
ITEM #
236861
DESC
95502 LONG NOSE PLIER 8IN
SP
[email protected]
UOM
EA
A
Cutters, Snips and Pliers, Pliers, Bent Nose
Pliers
PRICE
5.45
O.CAX
The MaxSteel line of pliers provides up to 45% less cutting effort with up to a
33% longer cutting edge. The dual durometer bi-material grip provides a
comfortable and secure grip. Pilers are drop forged from high carbon, alloy
steel for long life and durabilty .
ITEM #
264539
DESC
89-871 BENT LONG NOSE PLIERS W/CUTTER
6.4IN
SP UOM PRICE
[email protected] EA
12.01
A
Y.CHX
GREAT NECK HOBBY PLIERS
Great Neck Hobby Plier. Drop forged steel. Heat
treated for strength and durability. Polished head.
Spring action. Vinyl grips.
DESC
GREAT NECK BENT NOSE PLIERS
ITEM #
106003
HLF4C FLAT NOSE PLIERS 4-1/2IN
SP
[email protected]
106011
HLN4C LONG NOSE PLIERS 4-1/2IN
[email protected]
UOM
CD
A
CD
A
PRICE
7.83
V.REX
4.41
L.RLX
4 1/2" Bent Nose hobby plier. Drop forged steel. Heattreated for strength and durability. Polished head.
Spring action vinyl grips.
ITEM #
105953
DESC
HBN4C BENT NOSE PLIERS 4-1/2IN
SP
[email protected]
UOM
EA
A
PRICE
7.83
V.REX
Cutters, Snips and Pliers, Pliers, Needle
Nose Pliers
STANLEY NEEDLE NOSE PLIERS
JMK/IIT BENT NOSE PLIERS
Forged steel construction. Hand ground cutting edges.
Rust-resistant finish. Double dipped handles for
comfortable use. Machined jaws for gripping. Chrome-nickle steel for tough,
durable, hardened cutting edge.
Drop forged, heat treated steel. Hardened and tempered. Matte cushion high
visibility neon handles provide a non slip grip and makes them easy to locate.
Precision machined jaws. Polished head.
ITEM #
264792
ITEM #
127965
DESC
84-096 NEEDLE NOSE PLIER 5IN
SP
[email protected]
UOM
EA
A
PRICE
5.30
V.XVX
DESC
46510 LONG NOSE PLIER 11IN
SP
[email protected]
UOM
EA
A
PRICE
8.78
E.LCX
Cutters, Snips and Pliers, Pliers, Snap Ring
Pliers
GREAT NECK 4-1/2" SNIPE NOSE PLIERS
IRWIN TOOLS SNAP RING PLIERS
Needle or snipe nose pliers, for hobbies and
electronics work. Measures 4-1/2 inches long and have
spring action, blue vinyl handles.
ITEM #
106046
80
DESC
HSN4C SNIPE NOSE PLIERS 4-1/2IN
SP
[email protected]
UOM
CD
A
PRICE
7.83
V.REX
Snap ring pliers that combine two tools into one for
internal or external use. Four interchangeable tips for
ease in moving from one project to the next. ProTouch
grip for comfort and reduced hand fatigue.
ITEM #
002771
DESC
2078900 PLIER SNAP RING 6-1/2
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
11.32
H.EZX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Slip Joint
Pliers
STANLEY SLIP JOINT PLIERS
Forged steel construction. Hand ground cutting edges. Rust-resistant finish.
Double dipped handles for comfortable use. Machined jaws for gripping.
Chrome-nickel steel for tough, durable, hardened cutting edge.
ITEM #
264938
84-097 SLIP JOINT PLIER 6IN
DESC
SP
[email protected]
264946
84-098 SLIP JOINT PLIER 8IN
[email protected]
UOM
EA
A
EA
A
PRICE
4.46
O.ORX
5.75
V.OEX
Cutters, Snips and Pliers, Pliers, Slip Joint
Pliers
GREAT NECK SLIP JOINT COMBINATION
PLIER
Drop forged, steel plated construction. Ergonomic double-molded grips.
Precision milled jaws.
ITEM #
165581
SJ5C SLIP JOINT PLIER 5IN
DESC
SP
[email protected]
543160
SJ6C SLIP JOINT PLIER 6IN
[email protected]
241946
SJ8C SLIP JOINT PLIER 8IN
[email protected]
165573
SJ10C SLIP JOINT PLIER 10IN
[email protected]
UOM
CD
A
CD
A
CD
A
EA
A
PRICE
5.02
L.YAX
4.36
L.ECX
5.63
O.LHX
7.98
V.HVX
CRESCENT COMBINATION PLIERS
Drop-forged from carbon steel and accurately machined for best gripping and
turning of round objects such as pipes, rods, studs, pins and connections.
Curved jaws combination with machined gripping teeth and wire cutter.
Forged from carbon steel and accurately machined, hardened and tempered.
Bright plated finish. Red non-slip cushion handle grips. Carded. 1" jaw
opening.
ITEM #
306347
DESC
H28VN PLIERS COMBINATION 8IN
SP
[email protected]
446904
84-646 SLIP JOINT PLIER FATMAX 8IN
[email protected]
UOM
CD
A
EA
A
PRICE
7.54
E.HXZ
10.79
A.OEX
VISE-GRIP SLIP JOINT PLIERS
Durable nickel chromium steel construction. ProTouch
grips provide extra comfort and reduces hand fatigue. Machined jaws for
maximum gripping strength. Induction hardened cutting edge stays sharper,
longer. Meets or exceeds ANSI specifications.
ITEM #
298778
2078406 SLIP JOINT PLIERS 6IN
DESC
SP
[email protected]
211311
2078408 SLIP JOINT PLIERS 8IN
[email protected]
UOM
EA
A
EA
A
PRICE
7.44
E.XRX
8.82
R.CLX
WILDE TOOL ANGLE NOSE PLIERS
Knurled. Full polish. All purpose pliers.
ITEM #
086940
DESC
7G.NP/CC KNURLED PLIERS 6-3/4IN
SP
[email protected]
UOM
CD
A
PRICE
17.67
CO.LYX
SHEFFIELD SECURE GRIP SLIP JOINT
PLIERS
Sheffield Secure Grip Slip Joint Pliers. Precision machined and heat treated
jaws for secure grip. Drop forged steel for strength and durability. Chrome
finished to resist rust. Ergonomic rubber grip handle with Sheffield Oval-Grip
pattern.
ITEM #
168378
DESC
58505 SLIP JOINT PLIER 6IN
SP
[email protected]
UOM
EA
A
PRICE
5.29
O.CZX
APEX COMBINATION SLIP JOINT PLIER
Designed for gripping and turning round objects, such as pipes, rods and pins.
Curved-jaws combination with machined gripping teeth and wire cutter.
Forged from carbon steel and accurately machined, hardened and tempered.
Knurled handles. Bright, plated finish. 2 position jaws. 1 in. jaw capacity. Size:
6.5 in. Carded.
Angle nose slip joint pliers. 3 size adjustments. 1/2 in.
jaw opening width. Red vinyl grips. Lifetime warranty. Made in the USA.
Clamshell pack.
ITEM #
398543
ITEM #
086460
DESC
H26VN SLIP JOINT PLIER COMBINATION 61/2IN
www.wallacehardware.com
SP UOM PRICE
[email protected] CD 6.73
A
E.CXZ
WILDE TOOL IGNITION PLIERS
DESC
G250P.NP/CS IGNITION PLIERS 5IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
10.25
H.HCX
81
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Slip Joint
Pliers
WILDE TOOL ANGLE NOSE SLIP JOINT
PLIERS
CHANNELLOCK SLIP JOINT PLIERS
Angle nose slip joint pliers. 3 adjustments. 3/4 in. jaw opening. All purpose
type pliers. Polished finish with red vinyl grip handles. Lifetime warranty. Made
in the USA.
ITEM #
086983
G251FP.NP/BB ANGLE NOSE PLIERS 6-3/4IN
086649
G251FP.NP/CC ANGLE NOSE PLIERS 6-3/4IN
087076
G271FP.NP/CC ANGLE NOSE PLIERS 10IN
DESC
SP UOM PRICE
[email protected] EA
15.58
A
CZ.HLX
[email protected] CD 17.50
A
CO.CRX
[email protected] CD 21.69
A
CR.OCX
WILDE TOOL SLIP JOINT PLIERS
Staight nose slip joint pliers. 2 adjustments. Lobster claw jaws. Recessed nut
and bolt system. Polished finish with red vinyl grip handles. Lifetime warranty.
Made in the USA.
ITEM #
086150
G262FP.NP/CC SLIP JOINT PLIERS 6IN
SP
[email protected]
086967
G262FP.NP/BB SLIP JOINT PLIERS 6IN
[email protected]
086177
G263FP.NP/CC SLIP JOINT PLIERS 8IN
[email protected]
086975
G263FP.NP/BB SLIP JOINT PLIERS 8IN
[email protected]
DESC
UOM
CD
A
EA
A
CD
A
EA
A
PRICE
13.46
CX.CLX
12.59
Y.VRX
15.03
CZ.OXZ
14.13
CX.ROX
WILDE TOOL 90? NOSE PIPE WRENCH
PLIERS
10" Smooth jaw. Smooth jaw. Polished. All Wilde pliers are drop-forged, heattreated, and assembled by an American professional in Hiawatha, Kansas
U.S.A. Wilde pliers are industrial grade and carry a Lifetime Warranty.
ITEM #
087114
DESC
SP UOM
[email protected] CD
A
G297P.NP/CC PIPE WRENCH PLIERS 10IN
PRICE
24.41
CA.OEX
CHANNELLOCK SLIP JOINT PLIER WITH
WIRE CUTTING SHEAR
82
DESC
524 4.5" SLIP JOINT PLIER WITH SHEAR
Channellock uses high-carbon C1080 steel for superior performance
on the job and electronic coating for ultimate rust prevention. Wire
cutting shear. PermaLock fastener eliminates nut and bolt failure.
Cannellock Blue grips for comfort.
ITEM #
311022
DESC
SP
[email protected]
526 SLIP JOINT PLIER 6IN
UOM
EA
A
PRICE
11.79
A.ARX
Cutters, Snips and Pliers, Pliers, Cutter and
Plier Sets
STANLEY 3-PIECE BI-MATERIAL PLIER
SET
Machined jaws. Cutting pliers feature induction
hardened cutting edges for long life. Includes: 6"
Diagonal, 6" Long Nose, 6" Slip Joint.
ITEM #
125415
DESC
SP
[email protected]
84-056 PLIER SET 3PC BI-MATERIAL
UOM
ST
A
PRICE
15.50
CZ.AEX
WILDE TOOL 12-PIECE PLIERS DISPLAY
Includes 4 each: G251FP.NP/BB - 6-3/4" Angle Nose Slip
Joint Pliers-Flush Fastener-Polished-Gripped,
G262FP.NP/BB - 6-1/2" Slip Joint Pliers- Flush FastenerPolished-Gripped, and G263FP.NP/BB - 8" Slip Joint
Pliers- Flush Fastener-Polished-Gripped. Lifetime
warranty. Made in the USA.
ITEM #
087041
DESC
DB71-3F/DB DISPLAY BOX 12PC
SP
[email protected]
UOM
DS
A
PRICE
169.18
CLH.LXZ
Cutters, Snips and Pliers, Pliers, Linesman
Pliers
KLEIN TOOLS SIDE CUT PLIERS
High Leverage Ne-Type. Our most popular side cutting pliers. Smooth, streamlined nose with knurled jaws. High-leverage design provides 46% greater
cutting and gripping power. Blue plastic dipped handles. Combination
polished and black-oxide finish. Overall length is 9-1/4". Jaw length is 1-7/16".
Jaw width is 1-7/32". Jaw thickness is 5/8". Knife length is 23/32".
Designed from high-carbon C1080 steel and coated for
ultimate rust prevention. The permalock fastener
eliminates nut and bolt failure. The serrated jaw allows
the user for firm grip and the wire cutting shear allows
the user to cut wire on the jobsite with ease.
ITEM #
459992
Cutters, Snips and Pliers, Pliers, Slip Joint
Pliers
SP UOM
[email protected] EA
A
PRICE
13.50
CX.CEX
ITEM #
340634
DESC
D213-9NE SIDE-CUT PLIERS 9-1/4IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
48.69
OL.VRX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Linesman
Pliers
STANLEY LINESMAN'S PLIERS
Forged steel construction. Hand Ground cutting edges.
Rust-resistant finish. Double dipped handles for comfortable use. Machined
jaws for gripping. Chrome-nickle steel for tough, durable, hardened cutting
edge.
ITEM #
264776
331384
264784
DESC
SP UOM PRICE
[email protected] EA
7.52
A
E.HOX
D2000-9NE SIDE CUTTING PLIERS 9IN 2000S [email protected] EA 62.75
A
VC.AOX
84-113 LINESMAN PLIERS 8IN
[email protected] EA
8.77
A
R.RHX
84-112 LINESMAN PLIERS 7IN
CRESCENT LINESMAN'S SIDE CUTTING
PLIERS
Keen edged cutters and spring tempered handles. Polished heads, gunmetal
handles. Cushion grip. Module display pack.
ITEM #
370851
508CVN PLIERS SIDE CUTTING 8IN
DESC
SP
[email protected]
264474
89-863 LINEMAN PLIERS 7.5IN
[email protected]
264482
89-864 LINEMAN PLIERS 8.5IN
[email protected]
264490
89-865 LINEMAN PLIERS 9.5IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
24.60
CA.VCX
14.57
CZ.COX
15.45
CZ.HYX
16.55
CL.ELX
STANLEY BI-MATERIAL LINESMANS
PLIERS
Machined jaws help grip items securely. Used for bending, grasping and
cutting hard wire. Limited lifetime warranty. 8" size.
ITEM #
125385
DESC
SP UOM
[email protected] EA
A
84-029 LINEMAN PLIER 8IN BI-MATERIAL
PRICE
7.99
R.CVX
Cutters, Snips and Pliers, Pliers, Linesman
Pliers
CRESCENT LINESMAN'S PLIERS PROSERIES
Co-molded grips. Compound Action. Compound leverage design that
increases cutting power by 50%. Chrome vanadium steel. Heat treated joint
rivet for smooth and consistent operation. Induction hardened edges for long
cutting life. 1/3 lighter than standard pliers, reduces fatigue.
ITEM #
210323
331392
DESC
SP UOM PRICE
[email protected] EA
21.19
A
CE.YXZ
[email protected] EA
59.79
A
OY.ARX
PS20509C PLIER LINESMAN CA 9IN
D213-9ST IRONWORKERS PLIERS -SQUARE
NOSE 9IN
CRESCENT PIVOT PRO COMPOUND
ACTION DIAGONAL PLIER
Unique pivot action design requires 40% less force to
cut; Unlike standard pliers that pivot on the center-bolt only, additional
leverage can be applied; providing more leverage and force to the cutting
edge; Forged steel body for strength and durability edge; Induction hardened
cutting edge for long life; Dual material grips for added comfort and durability.
ITEM #
454796
DESC
SP UOM PRICE
[email protected] EA
25.06
A
CY.COX
CCA5428 LINESMAN PLIER COMPOUND
ACTION DIAG 8IN
KLEIN TOOLS HD HIGH-LEVERAGE SIDE
CUT PLIERS
Quickly and easily pulls 1/8" or 1/4" flat steel fish tape without damaging the
tape. High-leverage design. Rivet is closer to the cutting edge for 46% greater
cutting and gripping power than other plier designs. Streamlined design with
sure-gripping, cross-hatched knurled jaws.
ITEM #
331686
DESC
SP
UOM PRICE
54.08
A
OR.XEX
D213-9NETP SIDE-CUTTING PLIERS 9-1/2IN [email protected] EA
CRESCENT PIVOT PRO COMPOUND ACTION
LINESMAN PLIER
Unique pivot action design requires 40% less force to cut; Unlike
standard pliers that pivot on the center-bolt only, additional
leverage can be applied; providing more leverage and force to the
cutting edge; Forged steel body for strength and durability;
Induction hardened cutting edge for long life; Dual material grips for added
comfort and durability and Linesman Pliers include machined, cross-check jaw
pattern for gripping.
Durable nickel chromium steel construction. ProTouch grips provide extra
comfort and reduces hand fatigue. Induction hardened cutting edge stays
sharper, longer. Machined jaws for maximum gripping strength. Meets or
exceeds ANSI specifications.
ITEM #
454788
ITEM #
298735
DESC
CCA20509 LINESMAN PLIER COMPOUND
ACTION 9IN
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
30.07
A
LZ.YRX
VISE-GRIP LINEMAN'S PLIERS
DESC
2078209 LINEMANS PLIERS 9.5IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
19.64
CO.XYX
83
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Linesman
Pliers
SHEFFIELD EASY CUT LINESMAN'S
PLIERS
CHANNELLOCK LINEMAN'S PLIERS
Hardened and tempered for easy cutting. Drop forged steel for strength and
durability. Chrome finished to resist rust. Ergonomic rubber grip overlay with
Sheffield Oval-Grip pattern.
ITEM #
168440
530417
Cutters, Snips and Pliers, Pliers, Linesman
Pliers
DESC
SP UOM PRICE
[email protected] EA
7.59
A
V.VCX
[email protected] EA
17.19
A
CZ.EOX
58501 LINESMAN CUT PLIER 7IN
2078208 N. AMERICAN LINEMANS PLIER
8IN
Improved high leverage pliers. Moving the rivet closer
to the cutter is less force required for cutting. Round
nose, laster-treated cutting edges last longer.
ITEM #
364649
DESC
SP UOM PRICE
[email protected] EA
30.65
A
LO.XVX
368 LINEMANS PLIERS- HI LEVERAGE
8.38IN
Cutters, Snips and Pliers, Pliers, Box Joint
Pliers
HOWARD BERGER LINEMAN'S PLIERS
CHANNELLOCK BOX JOINT PLIER
Heavy duty drop-forged chrome alloy steel fully polished. Insulated
cushion grips.
Made in the USA. Box joint diagonal. Laser heattreated cutting edges last longer. Only Channellock
uses a knife and anvil style cutting edge to ensure
perfect mating and superior cutting edge life.
Channellock uses a high-carbon C1080 steel for
superior performance on the job and electronic coating for ultimate rust
prevention. Channellock Blue grips for comfort.
ITEM #
236888
95505 LINESMAN PLIER 7IN
DESC
SP
[email protected]
301256
348 LINEMENS PLIER RD NOSE 8.5
[email protected]
236896
95509 LINESMAN PLIER 8IN
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
6.05
O.RCX
31.19
LO.VEX
6.75
V.XCX
GREAT NECK LINESMAN'S PLIERS
ITEM #
165557
E6C ELECTRICAL PLIER 6IN
SP
[email protected]
165565
E7C ELECTRICAL PLIER 7IN
[email protected]
241938
E8C ELECTRICAL PLIER 8IN
[email protected]
UOM
CD
A
CD
A
CD
A
PRICE
8.45
E.XCX
8.45
V.YCX
9.28
E.VRX
GREAT NECK LINESMAN AND
ELECTRICIAN PLIERS
84
DESC
UOM
EA
A
PRICE
21.36
CR.XRX
Forged steel construction. Hand ground cutting edges. Rust-resistant finish.
Double dipped handles for comfortable use. Machined jaws for gripping.
Chrome-nickel steel for tough, durable, hardened cutting edge.
ITEM #
264679
125407
264695
DESC
SP UOM PRICE
[email protected] EA
6.75
A
E.XYX
84-024 GROOVE JT PLIER 10IN [email protected] EA
8.68
MATERIAL
A
R.RLX
84-111 GROOVE JOINT PLIER 12IN FATMAX [email protected] EA
10.80
A
A.LZX
84-020 GROOVE JOINT PLIER 16IN FATMAX [email protected] EA
19.11
A
CV.ERX
84-109 GROOVE JOINT PLIER 8IN FATMAX
STANLEY GROOVE JOINT PLIERS
Forged steel construction. Hand ground cutting edges. Rust-resistant finish.
Double dipped handles for comfortable use. Machined jaws for gripping.
Chrome-nickel steel for tough, durable, hardened cutting edge.
4-3/4 inch spring action, vinyl grip handles. For hobbies
and electronics work.
HLE4C ELECTRIC PLIER 4-3/4IN
SP
[email protected]
Cutters, Snips and Pliers, Pliers, Groove Joint
Pliers
264709
ITEM #
105996
DESC
436 DIAG BOX JOINT PLIER 6IN
STANLEY GROOVE JOINT PLIERS
Great Neck Linesman's/Electrician's Plier. Ergonomic
double-molded grips. Precision drop forged head.
DESC
ITEM #
301221
SP
[email protected]
UOM
CD
A
PRICE
7.83
V.REX
ITEM #
323977
DESC
84-110 GROOVE JOINT PLIERS 10IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
9.67
H.ORX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Groove Joint
Pliers
CRESCENT TONGUE AND GROOVE
PLIER
VISE-GRIP GROOVELOCK PLIERS
Versatile utility pliers, ideal for objects of all shapes and sizes. They are forged
from alloy steel and precision machined for long life and durability. The unique
tooth design allows for better grip and increases torque transfer with less
effort. Self-locking jaw opening adjustment. Black-oxide finish. Straight jaw
design. Pocket-sized for increased access an portability. Professional dipped
grips for easy cleaning and a secure grip. Angled teeth allow for a stronger
grip on materials. Finish protects against corrosion.
ITEM #
117529
Cutters, Snips and Pliers, Pliers, Groove Joint
Pliers
DESC
RT24CVS PLIER 5IN MINI TONGUE&GROOVE
SNG HNDL
SP UOM PRICE
[email protected] EA
8.40
A
R.VCX
Press and slide button quickly adjusts lower jaw. Allpurpose jaw grips on round, flat, square and hex shapes. ProTouch grips
provide extra comfort and reduces hand fatigue. Multi-groove ratcheting
system provides precise jaw positioning to grip any type of surface. Lifetime
guarantee.
ITEM #
298700
2078108 GROOVELOCK PLIER 8IN
DESC
SP
[email protected]
298719
2078110 GROOVELOCK PLIER 10IN
[email protected]
298727
2078112 GROOVELOCK PLIER 12IN
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
18.35
CL.LOX
22.02
CV.RAX
26.42
CH.RCX
VISE-GRIP GROOVE JOINT PLIERS
Durable nickel choromium steel construction. ProTouch grips provide extra
comfort and reduces hand fatigue. Right angle teeth grip in all directions for
maximum bite. Meets or exceeds ANSI specifications. 2" jaw capacity.
CRESCENT UTILITY PLIERS
Multiple rib joint. Drop forged from alloy steel. Clean, sharp teeth give firm
grip. Chrome plated. Cushion grips.
ITEM #
370711
R27CV PLIER TONGUE & GROOVE 7IN
DESC
364827
R210CV PLIER TONGUE & GROOVE 10IN
369438
R212CV PLIER TONGUE & GROOVE 12IN
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
11.41
A.RXZ
13.23
Y.YEX
15.51
CZ.HXZ
CHANNELLOCK TONGUE AND GROOVE
PLIERS
Non-slip design. Reinforcing flange practically eliminates stress breakage.
Channellock Blue comfort grips are only for hand comfort and improved
appearance. They are not recommended or warranted for dielectric
properties.
ITEM #
311200
DESC
424 TONGUE/GROOVE PLIER 4.5IN
308730
426 TONGUE/GROOVE PLIER 6.5IN
362646
420 TONGUE/GROOVE PLIER 9.5IN
308749
430 TONGUE & GROOVE PLIER 10IN
301469
440 TONGUE/GROOVE PLIER 12IN
164232
442 TONGUE & GROOVE JAW PLIER 12IN
301450
460 TONGUE & GROOVE PLIER 16IN
www.wallacehardware.com
SP
UOM PRICE
[email protected] EA
16.76
A
CL.RXZ
[email protected] EA
14.49
A
CX.AYX
[email protected] EA
16.59
A
CL.VHX
[email protected] EA
17.26
A
CL.YAX
[email protected] EA
19.59
A
CV.HOX
[email protected] EA
19.89
A
CV.YEX
[email protected] EA
32.53
A
LV.VRX
ITEM #
298786
DESC
2078510 GROOVE JOINT PLIERS 10IN
SP
[email protected]
UOM
EA
A
PRICE
14.24
Y.RAX
IRWIN 6 INCH GROOVELOCK PLIERS
A simple push of a button adjusts the lower jaw twice faster than
traditional groove joint pliers. Multi-Groove Ratcheting System has
twice the groove positions of other groove joint pliers, for precise
positioning to grip any type of surface. Anti-pinch, non-slip ProTouch
Grips provide comfort, control, and less hand fatigue. Right angle
teeth grip in all directions for maximum bite. Metal Injection Molding process
for precision parts delivers strength and exceptional performance.
ITEM #
530131
4935351 GROOVELOCK PLIER 6IN
236616
95517 SLIP GROOVE PLIER 8IN
530166
4935320 GROOVE JOINT STRAIGHT JAW
PLIER 8IN
95518 SLIP GROOVE PLIER 10IN
236624
530158
DESC
4935321 GROOVE JOINT STRAIGHT JAW
PLIER 10IN
SP UOM PRICE
[email protected] EA
16.33
A
CX.YVX
[email protected] EA
6.58
A
O.YXZ
[email protected] EA
11.67
A
H.ALX
[email protected] EA
7.32
A
V.OEX
[email protected] EA
14.45
A
Y.RAX
IRWIN 10 INCH GROOVELOCK STRAIGHT JAW
PLIERS
Multi-groove ratcheting system allows for precise positioning. Twice
the groove positions of traditional groove joint pliers. Two times faster
press and slide button quickly adjusts lower jaw. Protouch grips are
anti-pinch and non-slip for comfort and control. Less hand fatigue.
ITEM #
530123
DESC
SP UOM PRICE
22.33
CV.YHX
4935096 STRAIGHT JAW GROOVELOCK PLIER [email protected] EA
10IN
A
1-800-776-0976 NOVEMBER
2016
85
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Groove Joint
Pliers
GREAT NECK MULTI-GROOVE PLIER
SHEFFIELD SECURE GRIP GROOVE
JOINT PLIERS
Chrome plated drop forged steel. Ergonomic doublemolded grips. Polished head and milled jaws.
ITEM #
165603
305405
350486
303232
165611
165638
DESC
W65C GROOVE
JOINT PLIER 61/2IN
GL10 GRIPLOCK
PLIER 9.5IN
W80C GROOVE
JOINT PLIER 8IN
GL12 GRIPLOCK
PLIER 12IN
W100C GROOVE
JOINT PLIER 10IN
W120C GROOVE
JOINT PLIER 12IN
INFO
SP UOM PRICE
[email protected] CD 6.36
A
O.HVX
9-1/2" LENGTH CAPACITY: 11/4""\LINE5 ADJUST
[email protected] EA
A
[email protected] CD
A
[email protected] EA
A
[email protected] CD
A
[email protected] CD
A
12" LENGTH CAPACITY 21/4""\LINE6 ADJUSTMENT
13.67
CX.LAX
7.42
V.OCX
18.34
CO.HYX
9.42
E.VOX
12.02
R.YZX
STANLEY FATMAX GROOVE JOINT
PLIERS
446920
DESC
SP UOM PRICE
84-647 GROOVE JOINT PLIER FATMAX 8IN [email protected] EA
13.02
A
Y.YXZ
84-648 GROOVE LOCK PLIER FATMAX 10IN [email protected] EA
14.39
A
CZ.CVX
Made in the USA. Smooth jaws for non-marring surfaces
(PVC pipe, chromes, etc). Undercut tongue & groove
design won't slip. Patented reinforcing edge minimizes
stress breakage. Smooth jaw for use on plated fixtures.
PermaLock fastener eliminates nut and bolt failure.
Channellock Blue grips comfort.
86
DESC
415 SMOOTH JAW PLIER 10IN
ITEM #
168394
384976
168408
384984
168416
DESC
SP UOM PRICE
[email protected] EA
7.59
A
V.VRX
[email protected] EA
61.41
A
VX.YVX
[email protected] EA
10.58
A
R.LCX
[email protected] EA
76.28
A
EX.AEX
[email protected] EA
15.28
A
A.YAX
58504 GROOVE JOINT PLIER 8IN
D504-10B KLAW PUMP PLIER QUICK
ADJUSTABLE 10IN
58506 GROOVE JOINT PLIER 10IN
D504-12B KLAW PUMP PLIER QUICK
ADJUSTABLE 12IN
58507 GROOVE JOINT PLIER 12IN
10 in. smooth jaw pliers. Comfort grip handle. Tongue and groove
adjustment. Angled nose.
ITEM #
856371
DESC
PST211 SMOOTH JAW PLIERS 10IN
SP
[email protected]
UOM
EA
A
PRICE
15.86
Y.EXZ
Cutters, Snips and Pliers, Pliers, Groove Joint
Plier Sets
CHANNELLOCK SMOOTH JAW PLIER
ITEM #
385514
Sheffield Secure Grip Groove Joint Pliers. Secure Grp Groove Joint Pliers. Drop
forged steel for strength and durability. Chrome finished to resist rust.
Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
COBRA SMOOTH JAW PLIERS
Revolutionary push-lock technology ensures jaw stays
in place once put in position. Optimized jaw geometry for multiple gripping
applications and increased accessibility. Induction hardened teeth for
strength. Bi-material handles for comfort, grip and control. 17 locking
positions. Limited lifetime warranty.
ITEM #
446912
Cutters, Snips and Pliers, Pliers, Groove Joint
Pliers
SP
[email protected]
CRESCENT DURA-PLIERS SET
Laminated box joint construction. Made in the USA.
Laminated and riveted. "Ply" construction. Multiple jaw
positions. Box joint construction. Textured air cushioned grips. Set contains 8"
and 10" pliers.
UOM
EA
A
PRICE
18.17
CO.RZX
ITEM #
345091
DESC
LB810 DURA-PLYERS SET-8IN & 10IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
21.23
CR.XYX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Groove Joint
Plier Sets
Cutters, Snips and Pliers, Pliers, Locking
Pliers
VISE-GRIP GROOVELOCK PLIER SET
IRWIN VISE-GRIP LOCKING PLIERS
2 pc. Groovelock clamshell set. 8" & 10". Press and slide button
quickly adjusts lower jaw. All purpose jaw grips on round, flat,
square and hex shapes. More groove positions provide the
optimum hand location for a better grip on the work piece.
ProTouch grips provide extra comfort and reduces hand fatigue.
Ratcheting action allows GrooveLock to be adjusted fom the open position up
to the work piece by pushing the handle up-no need to press button. An
5 inches long with 1-1/8 inch Jaw capacity. Curved jaw
puts pressure on four points of any style nut or bolt head ideal for applications
that requires maximum torque. Self-energizing lower jaw delivers 3X more
gripping power than traditional locking pliers, with no slipping or stripping.
Fast Release is 2x easier to open, has a no-trigger release, and offers one
hand operation. Anti-pinch, No-slip ProTouch grip provides comfort and
leverage while reducing vibrations and hand fatigue. Hex key adjusting screw
adjusts pressure, draws materials together and provides a controlled release.
Ideal for clamping, tightening, twisting and turning. High-grade heat-treated
alloy steel construction for maximum toughness and durability. Hardened
teeth grip from any angle.
ITEM #
290424
442259
DESC
2078709 PLIERS SET 8IN & 10IN
R200SET2 TONGUE & GROOVE PLIER SET10IN & 7IN
SP UOM PRICE
[email protected] ST
34.90
A
LO.VXZ
[email protected] ST
22.03
A
CR.HCX
DESC
SP
6 inch slip joint and 10 inch groove joint pliers. Constructed from
durable nickel chromium steel; induction-hardened cutting edge
stays sharper, longer. Machined jaws for maximum gripping
strength. anti-pinch, non-slip ProTouch Grips provide comfort,
control, and less hand fatigue. Right angle teeth grip in all
directions - maximum bite - No slip jaw action. Rust-resistant finish. Backed by
the IRWIN Tools VISE-GRIP lifetime guarantee.
DESC
SP UOM PRICE
19.80
A
CO.LHX
2078701 2PC PLIER SET-6"SLIP JNT +10" GRV [email protected] EA
Wire cutter. Curved jaw puts tremendous pressure on four points of any style
nut or bolt head. ProTouch grips provide control and comfort. Use for turning,
cutting, tightening, clamping and twisting. High-grade alloy steel, heat-treated
for maximum toughness and durability. 0" - 1-1/4" Jaw Adjustment.
ITEM #
302708
DESC
9T FAST RELEASE PLIERS
CURVED JAW LOCKING 5IN
360996
7T CURVED JAW LOCKING
PLIERS-FAST RELEASE 7IN
334448
5T CURVED JAW LOCKING
PLIERS-FAST RELEASE 10IN
INFO
0" - 1-1/4""
JAW
ADJUSTMENT"
0" - 1-5/8""
JAW
ADJUSTMENT"
0" - 1-7/8""
JAW
ADJUSTMENT"
CHANNELLOCK 2-PC TONGUE & GROOVE PLIER
SET
VISE-GRIP CURVED JAW LOCKING
PLIERS
Both of these pliers feature Channellock's patented undercut
tongue-and-groove design which assures strongest, no slip jaw
action, the patented PermaLock fastener which eliminates nut
and bolt failures and the distinctive Channellock Blue comfort
grips. Both of these pliers have an electronic coating to prevent rusting.
Made of the finest quality high-grade alloy steel.
Finished in bright nickel plating. 5/16" Jaw Thickness 15/8" Jaw Adjustment.
ITEM #
468851
DESC
GS-1 2PC TONGUE/GROOVE SET 6.5" (426)
9.5"(420
www.wallacehardware.com
UOM PRICE
16.90
A
CZ.EZX
4935581 PLIER LCKING 5CR FAST RELEASE [email protected] EA
VISE-GRIP CURVED JAW LOCKING
PLIERS - PROTOUCH
IRWIN VISE-GRIP PLIER SET
ITEM #
530476
ITEM #
530557
SP UOM PRICE
[email protected] EA
30.35
A
LZ.ALX
ITEM #
322962
322954
DESC
4935578 CURVED
JAW PLIERS 7IN
4935576 CURVED
JAW PLIERS 10IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
16.41
A
CX.YVX
[email protected] EA
A
17.35
CZ.HXZ
[email protected] EA
A
17.12
CZ.AHX
INFO
SP UOM
5/16" JAW THICKNESS [email protected] EA
5/8"" JAW ADJUSTMENT"
A
3/8" JAW THICKNESS 1-7/8"" [email protected] EA
JAW ADJUSTMENT"
A
PRICE
15.77
CX.ROX
15.80
CX.EYX
87
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Locking
Pliers
Cutters, Snips and Pliers, Pliers, Locking
Pliers
VISE-GRIP LOCKING PLIERS
Curved Jaws With Wire Cutter. Made of the finest
quality high-grade alloy steel. Finished in bright nickel plating. 1/4" Jaw
Thickness 15/16" Jaw Adjustment.
ITEM #
302678
321842
322938
322946
DESC
1002L3 CURVED
JAW PLIERS 4IN
902L3 CURVED
JAW PLIERS 5IN
702L3 CURVED
JAW PLIERS 7IN
502L3 CURVED
JAW PLIERS 10IN
INFO
1/4" JAW THICKNESS 15/16""
JAW ADJUSTMENT"
1/4" JAW THICKNESS 1-1/4""
JAW ADJUSTMENT"
5/16" JAW THICKNESS 1-5/8""
JAW ADJUSTMENT"
3/8" JAW THICKNESS 1-7/8""
JAW ADJUSTMENT"
SP UOM PRICE
[email protected] EA
13.34
A
A.YXZ
[email protected] EA
14.91
A
Y.YVX
[email protected] EA
15.30
A
CX.LXZ
[email protected] CD 15.57
A
CX.OAX
CRESCENT CURVED JAW LOCKING
PLIERS
Maximum jaw opening per ASME specs. Patented angled tooth pattern for
better grip. Nickel-plated finish resists rust and corrosion. Compound action
for powerful non-slip locking grip. Long nose with wire cutter gets to hard-toreach spots. Versatile curved jaw also features integral wire cutter. Locking
"C" clamps are faster and easier to use. Multi-screw adjusted. 1-1/4" Jaw
Capacity.
ITEM #
500496
DESC
C5CV LOCKING PLIERS
CURVED 5IN
INFO
SP UOM PRICE
1-1/4" JAW CAPACITY" [email protected] EA
10.41
A
H.AEX
VISE-GRIP LARGE JAW LOCKING PLIERS
Vise-Grip large jaw locking pliers. The unique jaw shape of the Large Jaw
Locking Plier opens to 3-1/8" (79mm). Built of high grade steel construction
and locks onto work without slipping. Easy locking and quick-release action.
Carded.
ITEM #
581216
VISE-GRIP STRAIGHT JAW LOCKING
PLIERS
Made of the finest quality high-grade alloy steel. Finished in bright nickel
plating. 5/8" Jaw Thickness 1-1/2" Jaw Adjustment.
ITEM #
322970
322989
DESC
102L3 STRAIGHT
JAW PLIER 10IN
302L3 STRAIGHT
JAW PLIERS 7IN
INFO
SP UOM
5/8" JAW THICKNESS 1-1/2"" [email protected] EA
JAW ADJUSTMENT"
A
7/16" JAW THICKNESS 1-1/8"" [email protected] EA
JAW ADJUSTMENT"
A
PRICE
15.55
CX.OHX
15.30
CX.VXZ
500518
500534
DESC
12L3 LARGE JAW PLIER
12IN
C7CV LOCKING PLIERS
CURVED 7IN
C10CVN LOCKING
PLIERS CURVED 10IN
INFO
SP UOM PRICE
[email protected] EA
24.62
A
CR.RXZ
1-5/8" JAW CAPACITY" [email protected] EA
12.29
A
Y.LYX
1-7/8" JAW CAPACITY" [email protected] EA
12.53
A
Y.VEX
SHEFFIELD QUICK RELEASE CURVED
JAW LOCKING PLIERS
Sheffield Quick Release Curved Jaw Locking Pliers. Milled jaws for gripping
power. Drop forged steel for strength and durability. Chrome plated to resist
rust. Built in wire cutter. Ergonomic rubber grip handle with Sheffield Oval-Grip
pattern.
ITEM #
168505
DESC
58522 CURVE JAW LOCKING PLIER 10IN
VISE-GRIP LONG NOSE LOCKING PLIERS
With Wire Cutter. Made of the finest quality high-grade
alloy steel. Each tool is heat-treated for maximum
durability and finished in bright nickel plating. A
squeeze of the hand puts one ton of controlled
pressure between the jaws. 1/8" Jaw Tip-1/4" Thickness
Base; 1-3/4" Jaw Tip-3/4" Adjustment Base.
ITEM #
302651
306355
312894
88
DESC
1602L3 LONG
NOSE PLIERS
4IN
1402L3 LONG
NOSE PLIERS
6IN
1502L3 LONG
NOSE PLIERS
9IN
INFO
1/8" JAW TIP-1/4"" THICKNESS
BASE; 1-3/4"" JAW T
SP UOM
[email protected] EA
A
PRICE
16.16
Y.EYX
CRESCENT STRAIGHT JAW LOCKING
PLIERS
SP UOM PRICE
[email protected] EA
15.12
A
CX.VAX
1/8" JAW TIP-5/16""
[email protected] EA
THICKNESS BASE; 2-1/4"" JAW
A
16.05
CX.HXZ
3/16" JAW TIP-13/32
[email protected] EA
THICKNESS BASE; 3"" JAW TIPA
19.50
CO.XAX
Maximum jaw opening per ASME specs. Multi Screw adjusted. Patented
angled tooth pattern for better grip. Nickel plated finish resists rust and
corrosion. Compound action for powerful non-slip locking grip. Long nose with
wire cutter. Versatile curved jaw also features integral wire cutter. Locking "C"
clamps are faster and easier to use than standard clamps. 1-5/16" Jaw
Capacity.
ITEM #
500461
500488
DESC
C7SV LOCKING PLIERS
STRAIGHT 7IN
C10SV LOCKING PLIERS
STRAIGHT 10IN
1-800-776-0976 NOVEMBER
2016
INFO
1-5/16" JAW
CAPACITY"
1-3/4" JAW
CAPACITY"
SP UOM PRICE
[email protected] EA
11.06
A
A.OZX
[email protected] EA
11.68
A
A.ACX
www.wallacehardware.com
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Locking
Pliers
Cutters, Snips and Pliers, Pliers, Locking
Pliers
GREAT NECK CURVED JAW LOCKING
PLIER
SHEFFIELD LONG NOSE LOCKING PLIER
Gripping heads are drop forged alloy steel. Jaws heat treated and polished for
strength. Teeth milled coarse for better gripping action.
ITEM #
578622
DESC
C7WC CURVED JAW LOCKING PLIER 7IN
578614
C10WC CURVED JAW LOCKING PLIER 10IN
SP UOM
[email protected] CD
A
[email protected] EA
A
PRICE
7.15
V.LCX
8.49
V.YZX
Sheffield Long Nose Locking Plier. Gripping heads are drop forged alloy steel.
Jaws heat treated and polished for strength. Teeth milled coarse for better
gripping action.
ITEM #
168513
DESC
58520 LONG NOSE LOCKING PLIER 6-1/2IN
SP UOM
[email protected] EA
A
PRICE
11.73
R.AYX
GREAT NECK CURVED JAW LOCKING
PLIER
Gripping heads are drop forged alloy steel. Jaws heat treated and polished for
strength. Teeth milled coarse for better gripping action.
GREAT NECK STRAIGHT JAW LOCKING
PLIER
Gripping heads are drop forged alloy steel. Jaws heat treated and polished for
strength. Teeth milled coarse for better gripping action. 7" Straight Jaw.
ITEM #
165646
DESC
INFO
SP UOM PRICE
7" STRAIGHT JAW" [email protected] CD 7.12
A
V.CHX
S7SC LOCKING PLIER
STRAIGHT JAW 7IN
ITEM #
256366
S5P LOCKING PLIER 5IN
DESC
388165
11T 10CR LOCKING PLIER FAST RELEASE
388173
13T LOCKING PLIER 7CR FAST RELEASE
SP UOM
[email protected] EA
A
[email protected] CD
A
[email protected] CD
A
PRICE
7.42
V.ORX
17.64
CL.XEX
17.36
CZ.AHX
IRWIN LONG NOSE FAST RELEASE
LOCKING PLIER
GREAT NECK STRAIGHT JAW LOCKING
PLIER
Gripping heads are drop forged alloy steel. Jaws heat treated and polished for
strength. Teeth milled coarse for better gripping action. 10" Lever Jaw.
ITEM #
165654
DESC
INFO
SP UOM PRICE
10" LEVER JAW" [email protected] EA
8.49
A
V.YZX
C10S LOCKING PLIER
STRAIGHT JAW 10IN
2x easier to open, has a no-trigger release, and offers one hand operation.
Includes convenient wire cutter. Long, straight nose provides easy access in
narrow, hard-to-reach places. Ideal for precision work and hobbies. The noslip ProTouch grip provides comfort and leverage while reducing vibrations
and hand fatigue. Ideal for tightening, clamping, twisting and turning. Turn
screw to adjust pressure and fit work. Stays adjusted for repetitive use.
Constructed of high-grade heat-treated alloy steel for maximum toughness
and durability. Hardened teeth are designed to grip from any angle.
ITEM #
388181
388203
CRESCENT LONG NOSE LOCKING
PLIERS
Maximum jaw opening per ASME specs. Patented angled tooth pattern for
better grip. Nickel-plated finish resists rust and corrosion. Compound action
for powerful non-slip grip. Long nose with wire cutter gets to hard-to-reach
spots. Versatile curved jaw also features integral wire cutter. Locking "C"
clamps are faster and easier to use. 2-1/4" Jaw Capacity.
ITEM #
500550
500569
DESC
C6NV LOCKING PLIER
LONG NOSE 6IN
W/WIRE CUTTER
C9NV LOCKING PLIER
LONG NOSE 9IN
W/WIRE CUTTER
DESC
14T 6LN LOCKING PLIER LONG NOSE FAST
RELEASE
15T 9LN LOCKING PLIER FAST RELEASE
SP UOM PRICE
[email protected] CD 17.89
A
CL.LOX
[email protected] CD 21.78
A
CV.AYX
IRWIN FAST RELEASE LOCKING PLIERS
SET
INFO
SP UOM PRICE
2-1/4" JAW CAPACITY" [email protected] EA
11.67
A
A.AZX
Two-piece set is 2x easier to open, has a no-trigger
release, and offers one hand operation. The no-slip
ProTouch grip provides comfort and leverage while reducing vibrations and
hand fatigue. Ideal for tightening, clamping, twisting and turning. Turn screw
to adjust pressure and fit work. Stays adjusted for repetitive use. Hardened
teeth are designed to grip from any angle.
2-7/8" JAW CAPACITY" [email protected] EA
A
ITEM #
388238
www.wallacehardware.com
14.61
CX.YHX
DESC
77T LOCKING PLIER SET FAST RELEASE10WR/6LN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] CD 34.03
A
LZ.ALX
89
Hand & Power Tools
Cutters, Snips and Pliers, Pliers, Locking
Pliers
Wrenches, Adjustable Wrenches and Sets,
Adjustable Wrenches
GREAT NECK LONG NOSE LOCKING
PLIER
STANLEY ADJUSTABLE WRENCHES
Gripping heads are drop forged alloy steel. Jaws heat treated and polished for
strength. Teeth milled coarse for better gripping action.
ITEM #
578630
DESC
SP UOM PRICE
[email protected] EA
7.20
A
V.LOX
V65GC STRAIGHT LONG NOSE LOCKKING
PLIER 6IN
WILDE TOOL SLIP JOINT WATER PUMP
PLIERS
10 in. Angle Nose Slip Joint Water Pump Pliers with Grip Tight Clip. Grip tight
clip for positive alignment. Deep milled pipe wrench style teeth. 2-1/8 in. jaw
opening. 7 adjustments. Red vinyl form-fitted grips. Drop forged and heat
treated. Hand polished and oiled for rust prevention. Adjustable nut and bolt
system. All Wilde pliers are drop-forged, heat-treated, and assembled by an
American professional in Hiawatha, Kansas U.S.A. Wilde pliers are industrial
grade and carry a Lifetime Warranty.
ITEM #
086959
DESC
SP UOM
[email protected] CD
A
G253P.NP/CC WATER PUMP PLIERS 10IN
PRICE
18.23
CO.HCX
Stanley adjustable wrenches provide the versatility for
more general applications. Protective chrome plating
and satin finish provide quality appearance and long life.
ITEM #
323993
87-367 ADJUSTABLE WRENCH 6IN
SP
[email protected]
324000
87-369 ADJUSTABLE WRENCH 8IN
[email protected]
324019
87-471 ADJUSTABLE WRENCH 10IN
[email protected]
324027
87-473 ADJUSTABLE WRENCH 12IN
[email protected]
ITEM #
380024
DESC
960 ELECTRICAL LOCKNUT PLIERS 8.5IN
ITEM #
395226
370703
369446
371386
SP UOM
[email protected] EA
A
PRICE
17.91
CO.VHX
90
DESC
68215 3PC MINI LOCKING PLIER SET
SP UOM PRICE
12.59
A
Y.VYX
AC26VS ADJUSTABLE WRENCH 6IN CHROME [email protected] EA 13.96
A
CX.ELX
AC28VS ADJUSTABLE WRENCH CRESCENT
[email protected] EA
14.46
8IN
A
CX.AHX
AC210VS ADJUSTABLE WRENCH CRESCENT [email protected] EA 18.08
10IN
A
CO.EYX
AC212VS ADJUSTABLE WRENCH 12IN
[email protected] EA
26.34
CHROME
A
CY.RHX
AC115 ADJUSTABLE WRENCH 15IN CHROME [email protected] EA 70.09
A
EL.YAX
Dual LEDs in the handle light the work area from both sides of wrench. Handy
on and off button recessed in handle for ease of operation. Automatic battery
saver turns LEDs off after 3 minutes. Dual material handle provides added
comfort and durability. Extra wide jaw opens to 1-5/16 inch.
DESC
SP UOM PRICE
[email protected] EA
23.65
A
CH.YLX
ACL29VS ADJUSTABLE E WRENCH 9IN LED
LIGHTS
IRWIN VISE GRIP ADJUSTABLE WRENCH
Heat treated carbon steel for strength and durability.
All are resistant to rust thanks to a chrome finish, and
feature a firm yet comfortable grip. This set includes a 4
inch curved jaw, 5 inch C-clamp with swivel pads, and a
5 inch long nose. All are locking pliers.
ITEM #
512548
DESC
AC24VS ADJUSTABLE WRENCH 4IN CHROME [email protected] EA
CRESCENT LIGHTED ADJUSTABLE
WRENCH
ITEM #
394173
GREAT NECK 3 PIECE MINI LOCKING
PLIER SET
PRICE
6.47
V.AZX
8.11
R.CLX
10.03
H.EZX
14.47
CX.YLX
Crestoloy alloy steel wrenches are drop forged and
completely heat treated for toughness. Gripping jaws are electronically
induction hardened for wear resistance. Sides of head are polished and entire
wrench is chromium plated. Module display pack.
369462
Fits most popular UL locknut sizes (metal, PVC or plastic). Thin profile for
confined spaces. Handle lock for easy storage. Spring loaded handles. Handle
shape allows both right-handed and left-handed use of the tool. Made in the
USA.
UOM
EA
A
EA
A
EA
A
EA
A
CRESCENT ADJUSTABLE WRENCHES
369454
CHANNELLOCK ELECTRICAL LOCKNUT
PLIERS
DESC
SP
[email protected]
Inch and metric scales. Extra wide jaw capacity. ProTouch Grips.
UOM
EA
A
PRICE
16.41
Y.ACX
ITEM #
530174
2078606 ADJUSTABLE WRENCH 6IN
DESC
SP
[email protected]
530182
2078608 ADJUSTABLE WRENCH 8IN
[email protected]
298794
2078610 ADJUSTABLE WRENCH 10IN
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
EA
A
PRICE
14.45
Y.RAX
15.80
CX.EYX
18.31
CL.LXZ
www.wallacehardware.com
Hand & Power Tools
Wrenches, Adjustable Wrenches and Sets,
Adjustable Wrenches
Wrenches, Adjustable Wrenches and Sets,
Adjustable Wrenches
APEX CRESCENT X6 PASS-THRU
ADJUSTABLE WRENCH SET
SHEFFIELD SECURE GRIP ADJUSTABLE
WRENCH
Universal design fits 6 fastener types (hex, square,
12pt, E-torx, partially rounded hex, spline). Includes 10 universal combo
sockets that fit both standard and metric fasteners: 3/8 in. (10mm), 7/16 in.
(11mm), 15/32 in. (12mm), 1/2 in. (13mm), 9/16 in. (14mm), 19/32 in. (15mm), 5/8
in. (16mm), 11/16 in. (17mm), 23/32 in. (18mm), 3/4 in. (19mm). Sockets are
clearly marked for easy identification. For pipe work, the jaw reverses. Simply
back the jaw out, turn it around and re-insert. Serrations on the inside edge
form a deep tooth pattern that hold pipe tight and reduce slipping. Corrosion
resistant black-phosphate finish. Packaged in a convenient storage tray.
Sheffield Secure Grip Adjustable Wrench. Milled jaws for gripping power. Drop
forged steel for strength and durability. Chrome plated to resist rust. Hang
hole for convenient storage. Ergonomic rubber grip handle with Sheffield
Oval-Grip pattern.
ITEM #
381446
DESC
SP UOM PRICE
[email protected] EA
35.35
A
LR.LCX
CPTAW8 ADJUSTABLE WRENCH 8IN
W/SOCKET SET BLK PHP
221082
221090
221104
DESC
SP UOM PRICE
[email protected] EA
7.39
A
V.OEX
58531 ADJUSTABLE WRENCH SHEFFIELD 8IN [email protected] EA 11.97
A
H.XOX
58532 ADJUSTABLE WRENCH SHEFFIELD 10IN [email protected] EA 15.62
A
Y.CAX
58533 ADJUSTABLE WRENCH SHEFFIELD 12IN [email protected] EA 16.21
A
Y.ELX
58529 ADJUSTABLE WRENCH SHEFFIELD 6IN
OLYMPIA HEX NUT WRENCH
GREAT NECK ADJUSTABLE WRENCH
Drop forged, professional quality. Clamshell packaged.
DESC
ITEM #
221074
ITEM #
350575
AW6C ADJUSTABLE WRENCH 6IN
SP
[email protected]
350567
AW8C ADJUSTABLE WRENCH 8IN
[email protected]
165476
AW10C ADJUSTABLE WRENCH 10IN
[email protected]
165484
AW12C ADJUSTABLE WRENCH 12IN
[email protected]
256358
AW15B ADJUSTABLE WRENCH 15IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
6.27
O.RCX
8.30
V.HAX
11.03
R.VYX
13.83
A.XEX
22.13
CL.AZX
Features single handed operation. Ergonomically
contoured and rubber-cushioned handles provide comfortable grip while
special cam action mechanism increases gripping pressure as the load applied
on the handle increases. Laminated metal construction, made of professional
all-grade high strength C1045 forged steel. Hardened and tempered jaws that
prevent slipping and will not round out the corners of nuts and bolts.
ITEM #
121304
01-150 HEX NUT WRENCH 8IN
DESC
SP
[email protected]
121312
01-151 HEX NUT WRENCH 10IN
[email protected]
UOM
EA
A
EA
A
PRICE
7.65
V.RAX
10.49
R.LRX
CHANNELLOCK ADJUSTABLE WRENCH
Long jaws for better grip. Measurement scales on wrench are handy for sizing
nuts, pipe and tube diameters. Greater jaw capacity for supporting larger nuts
and bolts. Thinner jaws for greater access in tight spaces. Vanadium steel
construction.
HOWARD BERGER ADJUSTABLE WRENCHES
Drop-forged heat treated carbon steel. Hang hole for convenient
storage.
ITEM #
236756
DESC
98646 ADJUSTABLE WRENCH 6IN
SP
[email protected]
236764
98648 ADJUSTABLE WRENCH 8IN
[email protected]
www.wallacehardware.com
UOM
EA
A
EA
A
ITEM #
379972
PRICE
5.99
O.EHX
7.15
V.LEX
379980
379999
380008
DESC
SP UOM PRICE
19.57
A
CV.HCX
808W ADJUSTABLE WRENCH 8IN CHROME [email protected] EA
21.60
A
CR.LVX
810W ADJUSTABLE WRENCH 10IN CHROME [email protected] EA
26.29
A
CY.HZX
812W ADJUSTABLE WRENCH 12IN CHROME [email protected] EA
37.72
A
LA.ORX
806W ADJUSTABLE WRENCH 6IN CHROME [email protected] EA
1-800-776-0976 NOVEMBER
2016
91
Hand & Power Tools
Wrenches, Adjustable Wrenches and Sets,
Adjustable Wrenches
CHANNELLOCK ADJUSTABLE WRENCH
Same capacity as a 12" wrench. Longer jaws grip better
avoiding slippage or nut round off. Measurement scales
(inches on front mm. on reverse) are handy for sizing
nuts, pipe and tube diameters. Great jaw capacity
supports larger nuts and bolts. Thinner jaws for greater
access in tight spaces. Precise jaw design grips tight the first time every time.
4 thread knurl and non-protruding jaws provide greater capacity; minimal
head width improves performance in confined spaces. Code Blue grips are
designed for durability and comfort.
ITEM #
385557
DESC
8WCB ADJUSTABLE WRENCH 8IN
SP
[email protected]
UOM
EA
A
PRICE
33.52
LE.LXZ
Wrenches, Adjustable Wrenches and Sets,
Adjustable Wrench Sets
APEX CRESCENT FLIP AND GRIP MULTI
TOOL
6-Tools-In-1: 1 - Ratcheting wrench (3/8 in. 5/8 in. capacity), 2 - Knife (smooth
and serrated edges), 3 - #2 Phillips? screwdriver, 4 - 3/16 in. slotted
screwdriver, 5 - Bottle opener, can opener, and wire stripper. Versatile:
Adjustable jaw fits over 40 fasteners. Speed: Unique spring-loaded jaw design
ratchets on fasteners making projects faster and easier. Portable: Collapsible
head allows for compact storage and pocket portability.
ITEM #
381438
DESC
SP UOM PRICE
23.40
A
CH.AHX
CFWMT FLIP & GRIP WRENCH MULTI-TOOL [email protected] EA
IRWIN VISE-GRIP ADJUSTABLE WRENCH SET
CHANNELLOCK 6" SLIM JAW
ADJUSTABLE WRENCH
WideAzz Jaw Opening of 1.34" and Code Blue Grip for Comfort. Xtra Slim 3/16"
Jaws. Allows access to previously impossible to reach areas. Extra Wide
Opening. Longer jaws grip better, Thinner jaws give greater access in tight
spaces. 4 thread knurl & non-protruding jaws provide greater capacity;
minimal head width improved performance in confined spaces. Handles BIG
jobs even in small places. Xtra Slim Jaws are 40% Thinner than a regular
wrench of the same size, and have the same jaw capacity as a 10-Inch wrench.
Strong, reliable, and versatile.
ITEM #
537861
6SWCB ADJUSTABLE WRENCH 6IN
DESC
SP
[email protected]
537888
8SWCB ADJUSTABLE WRENCH 8IN
[email protected]
UOM
EA
A
EA
A
PRICE
35.51
LR.HXZ
37.80
LA.VLX
Wrenches, Adjustable Wrenches and Sets,
Adjustable Wrench Sets
APEX 2-PIECE COLLAPSIBLE
RATCHETING WRENCH
92
DESC
CFW2 FLIP/GRIP WRENCH SET 2PC
ITEM #
530190
SP
[email protected]
UOM
ST
A
PRICE
32.86
LV.YCX
DESC
SP UOM PRICE
[email protected] EA
29.69
A
LX.OXZ
2078700 ADJUSTABLE WRENCH SET-6IN
+10IN-2PC
Wrenches, Adjustable Wrenches and Sets,
Ratcheting Adjustable Wrenches
APEX CRESCENT 8" RATCHETING
ADJUSTABLE WRENCH
Moveable jaw works on any 4 or 6 point fastener up to
1-1/4". Smooth ratcheting action is intuitive and easy to use. Unique handle
design accommodates a wide variety of hand sizes and shapes. Ratcheting
on/off switch allows wrench to also be used as a traditional adjustable wrench.
Handle size and shape promotes proper use of tool.
ITEM #
377244
The Crescent Flip & Grip seeks to provide you with all
the ability to tackle 50+ fasteners with just 2 wrenches.
Adjustable jaw fits a range of fastener sizes for a variety of projects. Unique,
spring-loaded jaw design ratchets on fasteners making projects faster and
easier. Collapsible head allows for compact storage and pocket portability.
Locking pivot helps reach around obstacles and into tight spaces. 8 in. wrench
accommodates fasteners in the following range: 1/2-3/4 in. and 12-19mm. 6 in.
wrench accommodates fasteners in the following range: 1/4-7/16 in. and 611mm.
ITEM #
390984
Durable chrome vanadium construction is super sturdy.
ProTouch grip provides maximum torque and comfort and is slip
resistant. Wrenches have English and metric scales, extra-wide
capacity, and a hang hole for easy wall storage. Backed by the
IRWIN Tools VISE-GRIP lifetime guarantee. 6 inch and 10 inch
wrenches.
DESC
ATR28 RATCHETING WRENCH ADJUSTABLE
CRESCENT 8IN
SP UOM PRICE
[email protected] EA
18.88
A
CV.VCX
Wrenches, Open End and Box End Wrenches
and Sets, Open End Wrenches
GREAT NECK SAE PROFESSIONAL OPEN
END WRENCH
Drop forged construction. Hang tab package.
ITEM #
186562
DESC
OE3C OPEN END WRENCH 1/2INX9/16IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
3.92
L.OZX
www.wallacehardware.com
Hand & Power Tools
Wrenches, Open End and Box End Wrenches
and Sets, Open End Wrenches
GARDNER BENDER LOCKNUT WRENCH
GREAT NECK COMBINATION WRENCH
Locknut wrench solves the problem of tight spaces and fits the majority of UL
locknuts. Etched markings allow for easy identification; clearly marked tighten
and loosen ends make usage a breeze. Thin design allows easy maneuvering
in tight locations while durable steel construction makes it strong enough to
get the job done. Hooked tip latches onto locknut and maximizes turning
leverage.
DESC
ITEM #
800428
LNW-500 LOCKNUT WRENCH 1/2"
SP
[email protected]
800429
LNW-750 LOCKNUT WRENCH 3/4"
[email protected]
UOM
EA
A
EA
A
PRICE
8.80
E.VAX
9.15
E.HXZ
Wrenches, Open End and Box End Wrenches
and Sets, Open End Wrench Set
GREAT NECK 6 PIECE OPEN END WRENCH SET
Reuseable Metal Storage Clip. Drop Forged Construction. Set includes
sizes: 1/4" x 5/16" 3/8" x 7/16" 1/2" x 9/16" 5/8" x 3/4" 3/4" x 7/8" 15/16" x
1".
ITEM #
186589
DESC
OE66K OPEN END WRENCH SET 6PC
SP
[email protected]
UOM
ST
A
PRICE
17.26
CX.LVX
GREAT NECK 6 PIECE METRIC OPEN
END WRENCH SET
Reuseable Metal Storage Clip. Drop Forged Construction. Set includes: 6mm x
8mm 7mm x 9mm 10mm x 11mm 12mm x 14mm 13mm x 15mm 17mm x 19mm.
ITEM #
186465
DESC
MM66K METRIC WRENCH SET OE 6PC
Wrenches, Combination Wrenches and Sets,
Combination Wrenches
SP
[email protected]
UOM
ST
A
PRICE
17.01
CX.XYX
Wrenches, Combination Wrenches and Sets,
Combination Wrenches
Fully polished and chrome plated for rust resistance and easy cleaning. Heat
treated and tempered alloy steel for strength and uniform hardness. Hang tab
package.
ITEM #
159905
CO25C COMBINATION WRENCH 1/4IN
DESC
SP
[email protected]
159913
CO56C COMBINATION WRENCH 5/16IN
[email protected]
159921
CO1C COMBINATION WRENCH 3/8IN
[email protected]
159948
CO2C COMBINATION WRENCH 7/16IN
[email protected]
159956
CO3C COMBINATION WRENCH 1/2IN
[email protected]
159964
CO4C COMBINATION WRENCH 9/16IN
[email protected]
159972
CO5C COMBINATION WRENCH 5/8IN
[email protected]
159980
CO6C COMBINATION WRENCH 11/16IN
[email protected]
159999
CO7C COMBINATION WRENCH 3/4IN
[email protected]
160008
CO78C COMBINATION WRENCH 7/8IN
[email protected]
160016
CO8C COMBINATION WRENCH 15/16IN
[email protected]
160024
CO10C COMBINATION WRENCH 1IN
[email protected]
160032
C116C COMBINATION WRENCH 1-1/16IN
[email protected]
160040
C118C COMBINATION WRENCH 1-1/8IN
[email protected]
160059
C125C COMBINATION WRENCH 1-1/4IN
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
GREAT NECK METRIC COMBINATION
WRENCH
Fully polished and chrome plated for rust resistance and easy cleaning. Heat
treated and tempered alloy steel for strength and uniform hardness. Hang tab
package.
ITEM #
163678
CO7MC METRIC COMBINATION WRENCH 7MM [email protected] EA
FULLER COMBINATION WRENCHES
163686
CO8MC METRIC COMBINATION WRENCH 8MM
Forged from durable carbon steel, for strength and long lasting performance.
Designed with a raised panel, and plated to maintain its appearance even
during heavy use.
160067
C10MC METRIC COMBINATION WRENCH 10MM
160075
C11MC METRIC COMBINATION WRENCH 11MM
ITEM #
399892
160083
C12MC METRIC COMBINATION WRENCH 12MM
160091
C13MC METRIC COMBINATION WRENCH 13MM
DESC
420-1361 PRO COMB WRENCH 7/16IN
www.wallacehardware.com
SP
[email protected]
UOM
CD
A
PRICE
1.99
C.ERX
PRICE
3.26
C.YVX
3.30
C.YVX
3.30
C.YRX
3.67
L.CVX
3.84
L.LAX
4.16
L.VLX
4.50
L.RYX
4.98
L.YEX
6.00
O.VAX
6.85
V.XOX
8.08
V.HVX
9.06
E.OLX
8.20
V.ACX
9.47
E.HVX
12.36
H.OZX
DESC
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
3.30
A
C.YRX
[email protected] EA
3.55
A
L.CXZ
[email protected] CD 4.04
A
L.OAX
[email protected] CD 4.04
A
L.VXZ
[email protected] CD 4.28
A
L.EVX
[email protected] CD 4.28
A
L.EVX
93
Hand & Power Tools
Wrenches, Combination Wrenches and Sets,
Combination Wrenches
GREAT NECK METRIC COMBINATION WRENCH
(continued)
ITEM #
160105
C14MC METRIC COMBINATION WRENCH 14MM [email protected] CD
DESC
SP UOM PRICE
4.65
A
L.HRX
[email protected] CD 4.86
A
L.YXZ
[email protected] CD 5.02
A
L.YAX
[email protected] CD 5.02
A
L.YAX
[email protected] CD 5.75
A
O.VCX
[email protected] CD 6.12
A
O.RVX
[email protected] CD 6.36
A
O.HAX
[email protected] CD 6.49
A
O.AEX
160113
C15MC METRIC COMBINATION WRENCH 15MM
160121
C16MC METRIC COMBINATION WRENCH 16MM
160148
C17MC METRIC COMBINATION WRENCH 17MM
160156
C18MC METRIC COMBINATION WRENCH 18MM
163708
C20MC COMBINATION WRENCH 20MM
160172
C21MC COMBINATION WRENCH 21MM
160180
C22MC COMBINATION WRENCH 22MM
Wrenches, Combination Wrenches and Sets,
Combination Wrenches
APEX CRESCENT METRIC COMBINATION
WRENCH
Chrome Vanadium alloy steel wrenches. Delivers long lasting durability. 12point combination. Sizes stamped on both sides for easy reading. Full polish.
Nickel chrome plated for long lasting protection.
ITEM #
393991
394009
394017
394033
394041
394068
394076
394084
394092
APEX CRESCENT SAE COMBINATION
WRENCH
394106
Chrome Vanadium alloy steel wrenches. Delivers long lasting durability. 12point combination. Sizes stamped on both sides for easy reading. Full polish.
Nickel chrome plated for long lasting protection.
ITEM #
393436
393452
393479
393487
393495
393509
393886
393894
393908
393916
393924
393932
393959
393967
393975
393983
94
DESC
CCW0 COMBINATION WRENCH 1/4IN SAE
POLISHED
CCW1 COMBINATION WRENCH 5/16IN SAE
POLISHED
CCW3 COMBINATION WRENCH 3/8IN SAE
POLISHED
CCW4 COMBINATION WRENCH 7/16IN SAE
POLISHED
CCW5 COMBINATION WRENCH 1/2IN SAE
POLISHED
CCW6 COMBINATION WRENCH 9/16IN SAE
POLISHED
CCW7 COMBINATION WRENCH 5/8IN SAE
POLISHED
CCW8 COMBINATION WRENCH 11/16IN SAE
POLISHED
CCW9 COMBINATION WRENCH 3/4IN SAE
POLISHED
CCW10 COMBINATION WRENCH 13/16IN SAE
POLISHED
CCW11 COMBINATION WRENCH 7/8IN SAE
POLISHED
CCW12 COMBINATION WRENCH 15/16 SAE
POLISHED
CCW13 COMBINATION WRENCH 1IN SAE
POLISHED
CCW14 COMBINATION WRENCH 1-1/16 SAE
POLISHED
CCW15 COMBINATION WRENCH 1-1/8 SAE
POLISHED
CCW16 COMBINATION WRENCH 1-1/4 SAE
POLISHED
SP UOM PRICE
[email protected] EA
2.70
A
L.XOX
[email protected] EA
2.70
A
L.XCX
[email protected] EA
2.68
A
L.XCX
[email protected] EA
2.99
A
L.LVX
[email protected] EA
3.35
A
L.EOX
[email protected] EA
4.04
A
L.YZX
[email protected] EA
4.41
A
O.LHX
[email protected] EA
4.99
A
O.HCX
[email protected] EA
5.44
A
V.XVX
[email protected] EA
6.31
A
V.HZX
[email protected] EA
6.69
A
E.XOX
[email protected] EA
7.78
A
E.AOX
[email protected] EA
9.41
A
H.XHX
[email protected] EA
10.52
A
H.YRX
[email protected] EA
11.54
A
A.REX
[email protected] EA
13.67
A
CX.LRX
394114
394122
394130
394149
394157
394165
DESC
CCW18 COMBINATION WRENCH 7MM METRIC
POLISHED
CCW19 COMBINATION WRENCH 8MM METRIC
POLISHED
CCW20 COMBINATION WRENCH 9MM METRIC
POLISHED
CCW21 COMBINATION WRENCH 10MM METRIC
POLISHED
CCW22 COMBINATION WRENCH 11MM METRIC
POLISHED
CCW23 COMBINATION WRENCH 12MM
METRIC POLISHED
CCW24 COMBINATION WRENCH 13MM
METRIC POLISHED
CCW25 COMBINATION WRENCH 14MM
METRIC POLISHED
CCW26 COMBINATION WRENCH 15MM
METRIC POLISHED
CCW27 COMBINATION WRENCH 16MM
METRIC POLISHED
CCW28 COMBINATION WRENCH 17MM METRIC
POLISHED
CCW29 COMBINATION WRENCH 18MM
METRIC POLISHED
CCW30 COMBINATION WRENCH 19MM
METRIC POLISHED
CCW31 COMBINATION WRENCH 20MM
METRIC POLISHED
CCW32 COMBINATION WRENCH 21MM
METRIC POLISHED
CCW33 COMBINATION WRENCH 22MM
METRIC POLISHED
SP UOM PRICE
[email protected] EA
2.68
A
L.XOX
[email protected] EA
2.70
A
L.XOX
[email protected] EA
2.70
A
L.XOX
[email protected] EA
2.68
A
L.XCX
[email protected] EA
3.02
A
L.LRX
[email protected] EA
3.04
A
L.LAX
[email protected] EA
3.04
A
L.LAX
[email protected] EA
3.94
A
L.YRX
[email protected] EA
4.28
A
O.LCX
[email protected] EA
4.76
A
O.EAX
[email protected] EA
4.76
A
O.EAX
[email protected] EA
5.10
A
O.HYX
[email protected] EA
5.66
A
V.OXZ
[email protected] EA
5.78
A
V.OAX
[email protected] EA
6.13
A
V.REX
[email protected] EA
6.36
A
V.HZX
Wrenches, Combination Wrenches and Sets,
Combination Wrench Sets
FULLER 9 PC. COMBINATION WRENCH
SET
Set includes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8",
11/16", and 3/4". Chrome vanadium steel for strength
and durability with a raised panel finish. Heat treated
for consistent hardness. 12 point box end for snug fit and precision broached
jaws for sure gripping. Thin walled construction for access in cramped
quarters. Lifetime guarantee.
ITEM #
361712
DESC
426-1372 SET WRENCH COMB 9PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
ST
A
PRICE
17.95
CO.ARX
www.wallacehardware.com
Hand & Power Tools
Wrenches, Combination Wrenches and Sets,
Combination Wrench Sets
Wrenches, Combination Wrenches and Sets,
Ratcheting Combination Wrenches
GREAT NECK 5 PIECE COMBINATION
WRENCH SET
APEX/GEAR WRENCH RATCHETING
COMBINATION WRENCH
Reuseable Metal Storage Clip. Drop Forged. Set includes sizes: 3/8", 7/16",
1/2", 9/16", 5/8".
Fine toothed ratcheting box end wrench design for access to tight spots. All
metal construction, fully hardened nickel-chrome plated mirror finish.
ITEM #
301035
ITEM #
362425
9010D GEAR WRENCH 5/16IN
SP
[email protected]
362468
9012D GEAR WRENCH 3/8IN
[email protected]
362476
9014 GEAR WRENCH 7/16IN
[email protected]
362557
9016D GEAR WRENCH 1/2IN
[email protected]
362654
9018D GEAR WRENCH 9/16IN
[email protected]
362689
9020 GEAR WRENCH 5/8IN
[email protected]
362808
9022 GEAR WRENCH 11/16IN
[email protected]
362840
9024 GEAR WRENCH 3/4IN
[email protected]
362859
9028D GEAR WRENCH 7/8IN
[email protected]
DESC
COW5C COMBINATION WRENCH SET 5PC
SP UOM
[email protected] ST
A
PRICE
8.45
E.XCX
GREAT NECK 9 PIECE COMBINATION
WRENCH SET SAE
Fully polished and chrome plated for rust resistance
and easy cleaning; Heat treated and tempered alloy
steel for strength and uniform hardness; Compact
convenient storage tray; Sizes Include: 1/4", 5/16", 3/8",
7/16", 1/2", 9/16", 5/8", 11/16", 3/4".
ITEM #
830496
DESC
DESC
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
11.31
A.VYX
12.25
Y.LAX
13.09
Y.AYX
14.97
CZ.OLX
16.00
CL.XCX
17.87
CO.EVX
18.71
CV.LYX
18.71
CV.CEX
25.73
CY.EXZ
SP UOM PRICE
27.42
A
CR.LRX
4928 COMBINATION WRENCH SET SAE 9PC [email protected] ST
APEX/GEAR WRENCH RATCHETING
COMBINATION WRENCH
Fine toothed ratcheting box end wrench design for access to tight spots. All
metal construction, fully hardened nickel-chrome plated mirror finish.
APEX CRESCENT 10 PC COMBINATION
WRENCH SET
ITEM #
362905
9108DGEAR WRENCH 8MM
SP
[email protected]
362956
9109 GEAR WRENCH 9MM
[email protected]
362972
9110D GEAR WRENCH 10MM
[email protected]
362980
9111 GEAR WRENCH 11MM
[email protected]
362999
9112 GEAR WRENCH 12MM
[email protected]
363006
9113D GEAR WRENCH 13MM
[email protected]
363014
9115D GEAR WRENCH 15MM
[email protected]
APEX CRESCENT 10 PC COMBINATION
WRENCH SET
363022
9116D GEAR WRENCH 16MM
[email protected]
363030
9118D GEAR WRENCH 18MM
[email protected]
12-point Metric wrench set includes: 8, 9, 10, 11, 12, 13, 14, 15, 17,
19mm and storage rack. Meets ANSI and ASME specifications.
Guaranteed forever.
363073
9119 GEAR WRENCH 19MM
[email protected]
12-point SAE wrench set includes: 1/4" 5/16", 11/32", 3/8", 7/16",
1/2", 9/16", 5/8", 11/16", 3/4" and storage rack. Meets ANSI and
ASME specifications. Guaranteed forever.
ITEM #
394416
ITEM #
394424
DESC
CCWS2 COMBINATION WRENCH SET SAE
10PC
DESC
CCWS3 COMBINATION WRENCH SET MM
10PC
www.wallacehardware.com
SP UOM PRICE
[email protected] ST
19.98
A
CV.YRX
DESC
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
11.31
A.EHX
11.31
A.EHX
12.25
Y.LAX
13.18
Y.YZX
14.12
CX.HXZ
15.08
CZ.VOX
16.99
CL.AZX
17.87
CO.EVX
20.74
CE.HLX
20.74
CE.HLX
SP UOM PRICE
[email protected] ST
19.98
A
CV.YRX
1-800-776-0976 NOVEMBER
2016
95
Hand & Power Tools
Wrenches, Combination Wrenches and Sets,
Ratcheting Combination Wrench Sets
Wrenches, Combination Wrenches and Sets,
Ratcheting Combination Wrench Sets
APEX CRESCENT X6 7PC COMBINATION
WRENCH SET
APEX CRESCENT 4-IN-1 DOUBLE BOX
RATCHETING SET
Provides the innovation of the X6 design in the box end
allowing you to grip 6 different types of fasteners and the
convenience of ratcheting in the open end. This set includes
the following sizes: 8, 10, 12, 13, 14, 15 and 17mm.
Innovative stepped box-ends deliver excellent access
and clearance without sacrificing strength. Works with
a wide range of sizes and can be easily moved from job to job. Smooth profile
and unbroken surface allows more torque to be applied comfortably. Able to
tackle the following sizes: 8, 10, 12, 13, 14, 15, 17, 19 mm. Metric Black.
ITEM #
377236
DESC
SP UOM PRICE
[email protected] ST
30.23
A
LO.LVX
CX6RWM7 COMBINATION WRENCH SET
7PC
ITEM #
386642
386634
DESC
SP UOM PRICE
26.57
LX.CVX
26.57
LX.CVX
CX6DBM2 RATCHET WRENCH SET X6
[email protected] ST
DOUBLE BOX 2PC
A
CX6DBS2 RATCHET WRENCH SET X6 DOUBLE [email protected] ST
BOX 2PC
A
APEX CRESCENT X6 7PC COMBINATION
WRENCH SET
Provides the innovation of the X6 design in the box end
allowing you to grip 6 different types of fasteners and the
convenience of ratcheting in the open end. This set includes
the following sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 11/16".
ITEM #
377228
APEX/GEAR WRENCH SAE
COMBINATION RATCHETING SET
DESC
SP UOM PRICE
CX6RWS7 COMBINATION WRENCH SET 7PC [email protected] ST
30.23
A
LO.XCX
4 piece. Combines the speed of a ratchet and the
access capabilities of a wrench. Set includes sizes 13/16, 7/8, 15/16 and 1
inches.
ITEM #
362387
DESC
9309D SAE FLAT GEAR WRENCH 4PC
SP
[email protected]
UOM
ST
A
PRICE
107.47
AC.VRX
APEX QUADBOX DOUBLE BOX
RATCHETING WRENCH SET
13 pc. SAE. 4 sizes in one wrench. Surface drive on box end provides offcorner loading for better grip and reduced fastener rounding. Quadbox design
has 2 fastener sizes in each box end. Reversing levers on both sizes for fast
easy access. Contains: Quadbox ratcheting wrench, 5/16 inch, 3/8 inch, 7/16
inch, 1/2 inch and Quadbox ratcheting wrench, 9/16 inch, 5/8 inch, 11/16 inch
and 3/4 inch. 1/4 inch drive bit adapter, 10 bits: #1, #2, #3 Phillips, 5/32 inch,
7/32 inch, 1/4 slotted, and T-15, T-20, T-25 and T-27 Torx.
ITEM #
361488
DESC
85200 SAE QUADBOX SET 13PC
SP
[email protected]
UOM
ST
A
PRICE
69.89
EL.YHX
APEX QUADBOX DOUBLE BOX
RATCHETING WRENCH SET
13 piece set. Metric. 8 sizes from two reversible double box ratcheting
socketing wrenches for superior versatility. 12 point double box ratcheting
socketing wrench sizes: 8mm, 10mm, 12mm, 13mm, 16mm, 17mm, 18mm and
19mm. 4 dedicated recessed reversing levers for change of direction. Thin
profile head, all metal construction. Also includes bit drive adapter and 10 bits.
Bits included are: #1, #2, #3 Phillips, 5/32 inch, 7/32 inch, 1/4 inch slotted, T-15,
T-20, T-25 and T-27 Torx.
ITEM #
361526
96
DESC
85210D METRIC QUADBOX SET 13PC
SP
[email protected]
UOM
ST
A
PRICE
69.89
EL.YHX
APEX/GEAR WRENCH SAE
COMBINATION RATCHETING WRENCH
SET
7 piece. Set of full polish, fine-toothed combination
ratcheting wrenches. Combines the speed of a ratchet and the access
capabilities of a wrench. Includes sizes: 5/16, 3/8, 7/16, 1/2, 9/1", 5/8 and 3/4
inches.
ITEM #
362042
DESC
9317 SAE GEAR WRENCH SET 7PC
SP
[email protected]
UOM
ST
A
PRICE
70.76
EL.YRX
APEX/GEAR WRENCH METRIC
COMBINATION RATCHETING WRENCH
SET
4 piece. Set of fine full polish, fine toothed combination ratcheting?wrenches.
Combines the speed of a ratchet and the access capabilities of a wrench.
Includes sizes 21, 22, 24 and 25 mm.
ITEM #
362395
DESC
9413 MET FLAT GEAR WRENCH 4PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
ST
A
PRICE
106.78
AX.YVX
www.wallacehardware.com
Hand & Power Tools
Wrenches, Combination Wrenches and Sets,
Ratcheting Combination Wrench Sets
APEX/GEAR WRENCH METRIC
COMBINATION RATCHETING WRENCH
SET
CHANNELLOCK SAE RATCHETING
WRENCH SET
7 piece. Set of full polish, fine-toothed combination
ratcheting wrenches. Combines the speed of a ratchet and the access
capabilities of a wrench. Includes sizes: 8, 10, 12, 14, 15 and 18 mm.
ITEM #
362069
DESC
SP
[email protected]
9417 MET GEAR WRENCH SET 7PC
UOM
ST
A
PRICE
71.26
EL.YRX
DESC
SP
[email protected]
9700 SAE FLEX GEAR WRENCH 7PC
UOM
ST
A
PRICE
123.99
YO.YZX
APEX/GEAR WRENCH METRIC FLEX
COMBINATION RATCHETING WRENCH
SET
7 piece. Flex combination ratcheting wrench set in a
wrench rack. Provides greater access in tight spaces.
DESC
SP
[email protected]
9900D MET FLEX GEAR WRENCH 7PC
UOM
ST
A
PRICE
123.99
YO.XAX
CHANNELLOCK METRIC RATCHETING
WRENCH SET
Heat-treated for greater durability. Electronic coating
for ultimate rust prevention. 4 sizes in each wrench.
Hollow sockets excel over deep socket designs.
2 Includes ratchet sizes: 8mm x 10mm, 16mm x 17mm, 12mm x 13mm, 18mm x
19mm
2 12 point socket
ITEM #
336599
DESC
841M METRIC RATCHET WRENCH SET
www.wallacehardware.com
2 Includes ratchet sizes: 5/16" x 3/8", 7/16" x 1/2", 9/16" x 5/8", 11/16" x 3/4".
2 12 point socket
ITEM #
336580
DESC
841S RATCHETING WRENCH SET 4N1
SP
[email protected]
UOM
ST
A
PRICE
37.43
LA.CVX
GREAT NECK 1/4" DRIVE SAE SOCKET
7 piece. Flex combination ratcheting wrench set in a
wrench rack. Provides greater access in tight spaces.
ITEM #
362271
Heat-treated for greater durability. 4 sizes in each
wrench. Hollow sockets excel over deep socket
designs.
Wrenches, 1/4" Socket Wrenches and
Accessories, Standard Sockets
APEX/GEAR WRENCH SAE FLEX
COMBINATION RATCHETING WRENCH
SET
ITEM #
362077
Wrenches, Combination Wrenches and Sets,
Ratcheting Combination Wrench Sets
SP
[email protected]
UOM
ST
A
PRICE
37.43
LA.CVX
6 Point Chrome vanadium steel construction. Great
Neck sockets feature Posi-grip No Slip design. The socket wall design
provides superior gripping power without rounding the fastener points.
Torque is applied to the walls of the fastener head.
ITEM #
162396
14S SOCKET 1/4IN 6PT 1/4 DRIVE
DESC
SP
[email protected]
162418
516S SOCKET 5/16IN 6PT 1/4IN DRIVE
[email protected]
162442
716S SOCKET 7/16IN 6PT 1/4IN DRIVE
[email protected]
161187
150S SOCKET 1/2IN 6PT 1/4IN DRIVE
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
1.35
X.AXZ
1.35
X.AXZ
1.35
X.AXZ
1.35
X.AXZ
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
APEX 1/4 INCH DRIVE SOCKET
6 pt.
ITEM #
505625
CDS1 SOCKET 3/16IN 6 PT 1/4IN DRIVE
DESC
SP
[email protected]
505633
CDS2 SOCKET 7/32IN 6 PT 1/4IN DRIVE
[email protected]
505668
CDS3 SOCKET 1/4IN 6 PT 1/4IN DRIVE
[email protected]
505692
CDS4 SOCKET 9/32IN 6 PT 1/4IN DRIVE
[email protected]
505773
CDS5 SOCKET 5/16IN 6 PT 1/4IN DRIVE
[email protected]
505803
CDS6 SOCKET 11/32IN 6 PT 1/4IN DRIVE
[email protected]
505196
CDS7 SOCKET 3/8IN 6PT1/4IN DRIVE
[email protected]
505218
CDS8 SOCKET 7/16IN 6PT 1/4IN DRIVE
[email protected]
1-800-776-0976 NOVEMBER
2016
97
Hand & Power Tools
Wrenches, 1/4" Socket Wrenches and
Accessories, Standard Sockets
APEX 1/4 INCH DRIVE SOCKET (continued)
ITEM #
505226
DESC
CDS9 SOCKET 1/2IN 6PT 1/4IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
1.01
X.HZX
Wrenches, 1/4" Socket Wrenches and
Accessories, Metric Sockets
APEX 1/4 INCH DRIVE METRIC DEEP SOCKET
6 pt.
APEX 1/4 INCH DRIVE STANDARD DEEP SOCKET
ITEM #
505943
6 pt.
505978
505986
505994
ITEM #
505250
505269
505285
505374
505455
505552
505560
505595
505609
505617
DESC
SP UOM PRICE
[email protected] EA
1.35
A
C.XLX
CDDS1 DEEP SOCKET 3/16IN 6PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS2 DEEP SOCKET 7/32IN 6PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS3 DEEP SOCKET 1/4IN 6PT 1/4IN DRIVE
[email protected] EA
1.35
A
C.XLX
CDDS4 DEEP SOCKET 9/32IN 6PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS5 DEEP SOCKET 5/16IN 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS6 DEEP SOCKET 11/32IN 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS7 DEEP SOCKET 3/8IN 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS8 DEEP SOCKET 7/16IN 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS9 DEEP SOCKET 1/2IN 6 PT 1/4IN DRIVE
[email protected] EA
1.35
A
C.XLX
CDDS0 DEEP SOCKET 5/32IN 6PT 1/4IN DRIVE
Wrenches, 1/4" Socket Wrenches and
Accessories, Metric Sockets
GREAT NECK 1/4" DRIVE METRIC
SOCKET
6 Point. Chrome vanadium steel construction. Great
Neck sockets feature Posi-grip No Slip design. The socket wall design
provides superior gripping power without rounding the fastener points.
Torque is applied to the walls of the fastener head.
ITEM #
163546
4MMS SOCKET 6PT 4MM 1/4IN DRIVE
SP
[email protected]
162477
7MMS SOCKET 6PT 1/4IN DRIVE
[email protected]
162485
8MMS SOCKET 6PT 1/4IN DRIVE
[email protected]
162493
10MMS SOCKET 6PT 1/4IN DRIVE
[email protected]
163562
12MMS SOCKET 6PT 12MM 1/4IN DRIVE
[email protected]
98
DESC
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
1.35
X.AXZ
1.35
X.AXZ
1.35
X.AXZ
1.35
X.AXZ
1.35
X.AXZ
506001
506028
506036
506052
506079
506087
DESC
SP UOM PRICE
[email protected] EA
1.35
A
C.XLX
CDDS12 DEEP SOCKET 5MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS13 DEEP SOCKET 6MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS14 DEEP SOCKET 7MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS15 DEEP SOCKET 8MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS16 DEEP SOCKET 9MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS17 DEEP SOCKET 10MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XCX
CDDS18 DEEP SOCKET 11MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS19 DEEP SOCKET 12MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS20 DEEP SOCKET 13MM 6 PT 1/4IN DRIVE [email protected] EA 1.35
A
C.XLX
CDDS11 DEEP SOCKET 4MM 6 PT 1/4IN DRIVE
APEX 1/4 INCH DRIVE SOCKET
6 pt. 4mm.
ITEM #
505838
CDS11 SOCKET 4MM 6 PT 1/4IN DRIVE
DESC
SP
[email protected]
505846
CDS12 SOCKET 5MM 6 PT 1/4IN DRIVE
[email protected]
505854
CDS13 SOCKET 6MM 6 PT 1/4IN DRIVE
[email protected]
505870
CDS14 SOCKET 7MM 6 PT 1/4IN DRIVE
[email protected]
505889
CDS15 SOCKET 8MM 6 PT 1/4IN DRIVE
[email protected]
505897
CDS16 SOCKET 9MM 6 PT 1/4IN DRIVE
[email protected]
505900
CDS17 SOCKET 10MM 6 PT 1/4IN DRIVE
[email protected]
505919
CDS18 SOCKET 11MM 6 PT 1/4IN DRIVE
[email protected]
505927
CDS19 SOCKET 12MM 6 PT 1/4IN DRIVE
[email protected]
505935
CDS20 SOCKET 13MM 6 PT 1/4IN DRIVE
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
1.01
X.HZX
www.wallacehardware.com
Hand & Power Tools
Wrenches, 1/4" Socket Wrenches and
Accessories, Ratchets
GREAT NECK 1/4" DRIVE QUICK
RELEASE RATCHET
CRESCENT 1/4 INCH DRIVE SPINNER HANDLE
Professional quality. Chrome vanadium steel. Push button quick release. 5 1/2"
Length.
ITEM #
163597
DESC
SP
UOM PRICE
17.75
A
CX.EOX
RS014 QUICK RELEASE RATCHET 1/4IN DRIVE [email protected] EA
GREAT NECK 1/4" DRIVE REVERSING
RATCHET
DESC
SP
[email protected]
RA14 REVERSIBLE RATCHET 1/4X5-1/2IN
UOM
EA
A
Dual material handle for improved comfort and performance. Chrome
plated blades provide corrosion resistance and easy cleaning. Hang
hole can be used to hang on wall or with an additional driver to create a
T-handle.
ITEM #
506176
DESC
SP
[email protected]
CRW4 SPINNER HANDLE 1/4IN DRIVE
UOM
EA
A
PRICE
3.73
L.AOX
CRESCENT 1/4 INCH DRIVE FLEX
HANDLE/BREAKER BAR
Chrome plated high carbon steel. 5 1/2" length Knurled spinner ring.
ITEM #
163589
Wrenches, 1/4" Socket Wrenches and
Accessories, Spinner Handles
PRICE
6.49
O.ACX
Chrome vanadium alloy steel for maximum strength. Nickel chrome plated for
long lasting protection.
ITEM #
506249
DESC
CRW5 FLEX HANDLE 1/4IN
SP
[email protected]
UOM
EA
A
PRICE
6.81
E.CRX
APEX ROTO RATCHET SET
Wrenches, 1/4" Socket Wrenches and
Accessories, Drive Extensions
2 pc. Cushion Grip. 1/4" and 3/8" drive.
ITEM #
361593
DESC
SP
[email protected]
81223 ROTO RATCHET SET 2PC W/
UOM
EA
A
PRICE
79.01
EY.AZX
GREAT NECK EXTENSION
Great Neck 1/4" Drive 2" extension bar. Heat treated chrome vanadium steel
for strength and durability.
APEX DRIVE QUICK RELEASE RATCHET
1/4 in. drive. 72 tooth ratchet requires only a 5 degree
swing. Full polish for comfort. Chrome vanadium alloy steel for maximum
strength.
ITEM #
506109
506117
EX214 EXTENSION 2IN 1/4IN DRIVE
DESC
SP
[email protected]
161179
EX614 EXTENSION 6IN 1/4IN DRIVE
[email protected]
DESC
SP UOM PRICE
CRW0 RATCHET 72T QUICK REL POLISH HDL [email protected] EA 8.89
1/4 DR
A
R.RHX
CRW1 RATCHET 72T QUICK REL DUAL MTL HDL [email protected] EA 10.26
1/4DR
A
H.HXZ
Wrenches, 1/4" Socket Wrenches and
Accessories, Spinner Handles
GREAT NECK 1/4" DRIVE SPINNER
HANDLE
Chrome plated high carbon steel shaft. Molded mechanic's style handle.
ITEM #
162507
ITEM #
161160
DESC
2100 SPINNER 1/4IN DRIVE 6IN
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
UOM
EA
A
EA
A
PRICE
2.67
C.RXZ
2.94
C.HVX
APEX 1/4 INCH DRIVE EXTENSION BAR
Chrome Vanadium alloy steel. Long lasting durability. Nickel chrome
plated for long lasting protection.
ITEM #
506133
CDTA6 2IN EXTENSION 1/4IN DRIVE
DESC
SP
[email protected]
506168
CDTA7 6IN EXTENSION 1/4IN DRIVE
[email protected]
PRICE
3.18
C.AZX
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
PRICE
2.03
C.ELX
2.35
C.HRX
99
Hand & Power Tools
Wrenches, 1/4" Socket Wrenches and
Accessories, Universal Joints
GREAT NECK 1/4" DRIVE UNIVERSAL
JOINT
Wrenches, 1/4" Socket Wrenches and
Accessories, Drive Adapters
APEX ADAPTER
1/4 in. F x 3/8 in. M.
Heat treated for strength and durability.
ITEM #
162515
DESC
UJ14 UNIVERSAL JOINT 1/4IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
4.41
L.RLX
CDTA16 UNIVERSAL JOINT T 1/4IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
2.16
C.RVX
1/4" to 1/4" X 2" OAL. Ball retention design for quick-change
applications. Forged socket body. Square Drive: 1/4". Overall Length:
2". Lock Type: Ball.
Maximum operation angle of 45 degrees. Made of chrome
vanadium alloy steel for long lasting durability. Nickel chrome
plated for long lasting protection. Hang tag pack.
DESC
DESC
CDTA0 1/4IN F X 3/8IN M ADAPTER
IRWIN IMPACT SOCKET ADAPTER
APEX 1/4 INCH DRIVE SOCKET UNIVERSAL
JOINT
ITEM #
506265
ITEM #
506257
SP UOM
[email protected] EA
A
PRICE
3.39
L.EZX
ITEM #
388629
388637
388661
DESC
SP UOM PRICE
3.15
L.XHX
4.12
L.HCX
5.50
O.RCX
1837571 IMPACT SOCKET ADAPTER 1/4 TO 2IN [email protected] CD
OAL
A
1837572 IMPACT SOCKET ADAPTER 1/4 -3/8 TO [email protected] CD
2IN
A
1837573 IMPACT SOCKET ADAPTER 1/4-1/2
[email protected] CD
X2IN
A
Wrenches, 1/4" Socket Wrenches and
Accessories, Socket Sets
APEX CRESCENT 1/4" DRIVE TORX BIT SOCKET
Chrome Vanadium alloy steel socket base for long lasting durability.
Nickel chrome plated socket base for long lasting protection.
CHANNELLOCK 16 PC. ULTRA ACCESS
SOCKET SET
ITEM #
402622
402623
402626
402627
402628
402629
DESC
SP UOM PRICE
[email protected] EA
1.68
A
C.LAX
[email protected] EA
1.68
A
C.LAX
[email protected] EA
1.68
A
C.LAX
[email protected] EA
1.68
A
C.LRX
[email protected] EA
1.68
A
C.LAX
[email protected] EA
1.68
A
C.LRX
CDTS0 1/4" DRIVE, T-10 INTERNAL TORX
SOCKET
CDTS1 1/4" DRIVE, T-15 INTERNAL TORX
SOCKET
CDTS2 1/4" DRIVE, T-20 INTERNAL TORX
SOCKET
CDTS3 1/4" DRIVE, T-25 INTERNAL TORX
SOCKET
CDTS4 1/4" DRIVE, T-27 INTERNAL TORX
SOCKET
CDTS5 1/4" DRIVE, T-30 INTERNAL TORX
SOCKET
Wrenches, 1/4" Socket Wrenches and
Accessories, Drive Adapters
GREAT NECK 1/4" DRIVE ADAPTER
Heat Treated. Plastic hang tab package.
ITEM #
160474
100
DESC
AD438 ADAPTERS 3/8MALE X1/4F
SP
[email protected]
UOM
EA
A
PRICE
2.08
C.LVX
Unique Pass-Thru Designed Socket and Ratchet offers
Ultra versatility. 13 sockets equal 26 sizes of SAE &
Metric and 47 fastener size in all low profile design for tight spaces, including
HEX, 12 PT, EXTERNAL TORX, SPLINE, AND SQUARE. Socket extension for
deep access. Quick Release Ratchet for standard sockets.
ITEM #
537780
DESC
39100 ULTRA ACRESS SOCKET SET 16PC
SP UOM
[email protected] ST
A
PRICE
46.21
OV.HEX
GREAT NECK 85 PC. S.A.E. & METRIC
SOCKET SET
Includes a nylon zipper case. Ideal for cars, boats,
recreational vehicles and more. Set contains: 3/8" drive
reversible ratchet and accessories, ratcheting screwdriver, 1/4" & 3/8" drive
sockets in SAE and metric sizes, 2-1/4" bit holder, 3/8" drive spark plug socket,
5/8", 3/8" drive 3" extension, 3/8" (F) x 1/4" male adapter, 8 metric keys in
holder, 8 SAE hex keys in holder, 20 screwdriver bits in various sizes.
ITEM #
165816
DESC
HM85 SOCKET SET SAE & METRIC 85PC
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] ST
A
PRICE
43.08
LE.ERX
www.wallacehardware.com
Hand & Power Tools
Wrenches, 1/4" Socket Wrenches and
Accessories, Socket Sets
Wrenches, 1/4" Socket Wrenches and
Accessories, Socket Sets
GREAT NECK SOCKET SET
APEX CRESCENT 10 PC SOCKET SET
40 piece. 1/4" and 3/8" drive socket set. Inch and
metric sizes. Triple chrome plated rustproof, drop
forged ratchet. Set contains: 3/8" drive, 3" extension;
1/4" x 3/8" adapter, 1/4" drive, 6" nut driver; spin disc,
blow mold plastic case. SAE sizes: 3-3.
1/4" drive, 6-point standard SAE socket set includes: 5/32", 3/16",
7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" and storage rack.
Meets ANSI and ASME specifications. Guaranteed forever.
ITEM #
338001
DESC
SP UOM
[email protected] EA
A
PSO40 SOCKET SET 1/4IN & 3/8IN 40PC
PRICE
13.78
A.CZX
GREAT NECK 9 PIECE METRIC SOCKET
SET
1/4 inch drive. 6 Point. Chrome vanadium steel construction. Includes socket
holder strip for storage. Features Posi-grip no slip design. Includes sizes: 5, 6,
7, 8, 9, 10, 11 and 13mm.
ITEM #
186449
186457
DESC
914M SOCKET SET
1/4IN DRIVE 9PC
914SA SOCKET SET
1/4IN DRIVE 9PC
INFO
SP UOM
CONTAINS 5,6,7,8,9,10,11, [email protected] ST
13 MM SIZES
A
CONTAINS: 3/16"
[email protected] ST
A
PRICE
7.47
V.VOX
7.47
V.VOX
ITEM #
394246
DESC
SP UOM PRICE
8.03
A
R.XOX
CSAS8 SOCKET SET 6PT SAE 1/4IN DRIVE 10PC [email protected] ST
APEX CRESCENT 10 PC SOCKET SET
1/4" drive, 6-point standard Metric socket set includes: 4, 5, 6, 7, 8, 9,
10, 11, 12, 12, 13mm and storage rack. Meets ANSI and ASME
specifications. Guaranteed forever.
ITEM #
394254
DESC
CSAS9 SOCKET SET 6PT 1/4IN DRIVE MM
10PC
SP UOM PRICE
[email protected] ST
8.03
A
R.XOX
APEX CRESCENT 12 PC TORX BIT
SOCKET SET
1/4" drive, set includes: T10, T15, T20, T25, T27, T30. 3/8" drive includes: T40,
T45, T47, T50, T55, T60 and storage rack. Meets ANSI and ASME
specifications. Guaranteed forever.
ITEM #
394564
DESC
CBSS2 TORX BIT SOCKET SET 1/4 & 3/8 DRIVE
12PC
SP UOM PRICE
[email protected] ST
15.18
A
CZ.LEX
APEX CRESCENT 20 PC SOCKET WRENCH SET
1/4" drive, 6-point deep SAE/Metric socket wrench set includes:
1/4" drive, 72-Tooth quick-release ratchet, 1/4" drive, 3" extension,
1/4" drive, 6-Pt sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8",
7/16", 1/2"; 5, 6, 7, 8, 9, 10, 11, 12, 13mm and storage rack. Meets
ANSI and ASME specifications. Guaranteed forever.
ITEM #
394203
APEX CRESCENT 10 PC SOCKET SET
1/4" drive, 6-point deep SAE socket set includes: 5/32",
3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2"
and storage rack. Meets ANSI and ASME specifications.
Guaranteed forever.
ITEM #
394262
DESC
SP UOM PRICE
11.99
A
Y.CRX
CSAS10 SOCKET SET 6PT 1/4IN DRIVE SAE 10PC [email protected] ST
1/4" drive, 6-point deep Metric socket set includes: 4, 5,
6, 7, 8, 9, 10, 11, 12, 13mm and storage rack. Meets ANSI
and ASME specifications. Guaranteed forever.
DESC
SP UOM PRICE
11.99
A
Y.XHX
CSAS11 SOCKET SET 6PT 1/4IN DRIVE MM 10PC [email protected] ST
www.wallacehardware.com
SP UOM PRICE
[email protected] ST
19.98
A
CV.YRX
CHANNELLOCK 1/4" DRIVE SAE SOCKET
SET
Set includes: (9) 6 pt. Standard Sockets: 3/16, 7/32, 1/4,
9/32, 5/16, 11/32, 3/8, 7/16, 1/2 inch, (7) 6 pt. Deep
Sockets: 1/4. 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 inch, (1) 3
inch (76 mm) Extension. (1) 6 inch (152 mm) Extension, (1) Universal Joint, (1)
Spinner Handle, (1) Quick Release 45 gear teeth ratchet, Durable steel storage
case with molded inlay.
APEX CRESCENT 10 PC SOCKET SET
ITEM #
394270
DESC
CSWS1 SOCKET WRENCH SET SAE/MM 1/4
DRIVE 20PC
ITEM #
301323
DESC
34211 21PC 1/4" DR SAE SET, SOCKET SET
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
36.77
LH.REX
101
Hand & Power Tools
Wrenches, 3/8" Socket Wrenches and
Accessories, Standard Sockets
GREAT NECK 3/8" DRIVE-6 POINT SAE
SOCKET
Wrenches, 3/8" Socket Wrenches and
Accessories, Standard Sockets
APEX CRESCENT SOCKET DRIVE
Chrome vanadium steel construction. Great Neck
sockets feature Posi-grip No Slip design. The socket
wall design provides superior gripping power without rounding the fastener
points. Torque is applied to the walls of the fastener head.
ITEM #
160873
SK10 SOCKET 3/8IN 6PT 3/8IN DRIVE
DESC
SP
[email protected]
160881
SK11 SOCKET 7/16IN 6PT 3/8IN DRIVE
[email protected]
160903
SK12 SOCKET 1/2IN 6PT 3/8IN DRIVE
[email protected]
160911
SK13 SOCKET 9/16IN 6PT 3/8IN DRIVE
[email protected]
160954
SK16 SOCKET 3/4IN 6PT 3/8IN DRIVE
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
2.33
C.OAX
2.33
C.OAX
2.33
C.OHX
2.45
C.VEX
2.69
C.RXZ
3/8" drive, 5/16", 12-point SAE standard length socket.
Surface drive technology reduces fastener rounding.
Chrome Vanadium alloy steel for long lasting durability.
Nickel chrome plated for long lasting protection. Length:
3.50". Width: .63". Height: 1.69". Mechanics hand tool.
Meets ANSI and ASME specifications. All sockets on hang tag holder.
Guaranteed forever.
ITEM #
388866
CDS24 SOCKET 5/16IN 12PT 3/8IN DRIVE
DESC
388874
CDS25 SOCKET 3/8IN 12 PT 3/8IN DRIVE
388939
CDS26 SOCKET 7/16IN 12PT 3/8IN DRIVE
389129
CDS27 SOCKET 1/2IN 12PT 3/8IN DRIVE
389137
CDS28 SOCKET 9/16IN 12PT 3/8IN DRIVE
389153
CDS29 SOCKET 5/8IN 12PT 3/8IN DRIVE
389161
CDS30 SOCKET 11/16IN 12PT 3/8IN DRIVE
389188
CDS31 SOCKET 3/4IN 12PT 3/8IN DRIVE
389218
CDS32 SOCKET 13/16IN 12PT 3/8IN DRIVE
389226
CDS33 SOCKET 7/8IN 12PT 3/8IN DRIVE
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
1.35
C.XCX
1.34
C.XLX
1.35
C.XZZ
1.34
X.YZX
1.34
C.XZZ
1.54
C.CRX
1.54
C.CRX
1.54
C.CEX
1.69
C.LAX
1.69
C.LAX
GREAT NECK DEEP WALL SOCKET
3/8" Drive. 6 Point. Chrome vanadium steel
construction. Great Neck sockets feature Posi-grip No Slip design. The socket
wall design provides superior gripping power without rounding the fastener
points. Torque is applied to the walls of the fastener head.
ITEM #
161098
DESC
161101
SK20 DEEP WELL SOCKET 3/8 IN 6PT 3/8IN
DRIVE
SK21 SOCKET 7/16IN 6PT 3/8IN DRIVE
161128
SK22 SOCKET 1/2IN 6PT 3/8IN DRIVE
161136
SK23 SOCKET 9/16IN 6PT 3/8IN DRIVE
161144
SK24 SOCKET 5/8IN 6PT
161152
SK25 SOCKET 11/16IN 6PT 3/8IN DRIVE
161209
SK26 SOCKET 3/4IN 6PT 3/8IN DRIVE
161217
SK27 SOCKET 7/8IN 6PT 3/8IN DRIVE
SP UOM PRICE
[email protected] EA
3.43
A
L.XOX
[email protected] EA
3.43
A
L.XOX
[email protected] EA
3.43
A
L.XCX
[email protected] EA
3.43
A
L.XOX
[email protected] EA
4.16
A
L.VHX
[email protected] EA
4.41
A
L.RLX
[email protected] EA
4.77
A
L.AOX
[email protected] EA
4.98
A
L.YAX
APEX CRESCENT SOCKET DRIVE
3/8" drive, 3/8", 6-point SAE deep length socket. Surface drive
technology reduces fastener rounding. Chrome Vanadium alloy steel
for long lasting durability. Nickel chrome plated for long lasting
protection. Mechanics hand tool. Meets ANSI and ASME
specifications. All sockets on hang tag holder. Guaranteed forever.
ITEM #
389862
389870
389897
389900
389927
389951
389978
389986
389994
102
DESC
SP UOM PRICE
2.03
A
C.ELX
CDDS26 DEEP SOCKET 7/16IN 6PT 3/8IN DRIVE [email protected] EA 2.01
A
C.EXZ
CDDS27 DEEP SOCKET 1/2IN 6PT 3/8IN DRIVE [email protected] EA 2.01
A
C.VYX
CDDS28 DEEP SOCKET 9/16IN 6PT 3/8IN DRIVE [email protected] EA 2.01
A
C.VYX
CDDS29 DEEP SOCKET 5/8IN 6PT 3/8IN DRIVE [email protected] EA 2.36
A
C.HZX
CDDS30 DEEP SOCKET 11/16IN 6PT 3/8IN
[email protected] EA
2.36
DRIVE
A
C.HZX
CDDS31 DEEP SOCKET 3/4IN 6PT 3/8IN DRIVE [email protected] EA 2.36
A
C.HRX
CDDS32 DEEP SOCKET 13/16IN 6PT 3/8IN
[email protected] EA
2.36
DRIVE
A
C.HYX
CDDS33 DEEP SOCKET 7/8IN 6PT 3/8IN DRIVE [email protected] EA 2.36
A
C.HYX
CDDS25 DEEP SOCKET 3/8IN 6PT 3/8IN DRIVE [email protected] EA
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Wrenches, 3/8" Socket Wrenches and
Accessories, Metric Sockets
GREAT NECK 3/8" DRIVE-6 POINT
METRIC SOCKET
APEX CRESCENT SOCKET DRIVE
Chrome vanadium steel construction. Great Neck
sockets feature Posi-grip No Slip design. The socket wall design provides
superior gripping power without rounding the fastener points. Torque is
applied to the walls of the fastener head.
DESC
ITEM #
163600
SK7M SOCKET 7MM 6PT 3/8IN DRIVE
SP
[email protected]
163619
SK8M SOCKET 8MM 6PT 3/8IN DRIVE
[email protected]
163627
SK9M SOCKET 9MM 6PT 3/8IN DRIVE
[email protected]
160989
SK10M SOCKET 10MM 6PT 3/8IN DRIVE
[email protected]
161012
SK13M SOCKET 13MM 6PT 3/8IN DRIVE
[email protected]
161020
SK14M SOCKET 14MM 6PT 3/8IN DRIVE
[email protected]
161039
SK15M SOCKET 15MM 6PT 3/8IN DRIVE
[email protected]
161063
SK18M SOCKET 18MM 6PT 3/8IN DRIVE
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
2.33
C.OAX
2.33
C.OAX
2.33
C.OAX
2.33
C.OAX
2.33
C.OAX
2.57
C.ELX
2.69
C.RXZ
3.43
L.XOX
GREAT NECK DEEP WALL METRIC
SOCKET
3/8" Drive. 6 Point. Chrome vanadium steel construction. Great Neck sockets
feature Posi-grip No Slip design. The socket wall design provides superior
gripping power without rounding the fastener points. Torque is applied to the
walls of the fastener head.
ITEM #
161225
161268
161276
161284
169234
161306
DESC
2032 WALL METRIC SOCKET 10MM 3/8IN
DRIVE 6PT
2035 WALL METRIC SOCKET 13MM 3/8IN
DRIVE 6PT
2036 WALL METRIC SOCKET 14MM 3/8IN
DRIVE 6PT
2037 WALL METRIC SOCKET 15MM 3/8IN
DRIVE 6PT
2039 DEEP WALL METRIC SOCKET
3/8INVDRIVE 18MM
2141 SOCKET 19MM 6PT 3/8IN DRIVE
www.wallacehardware.com
Wrenches, 3/8" Socket Wrenches and
Accessories, Metric Sockets
SP UOM PRICE
[email protected] EA
2.82
A
C.RHX
[email protected] EA
2.80
A
C.REX
[email protected] EA
3.92
A
L.OZX
[email protected] EA
3.92
A
L.OZX
[email protected] EA
4.53
A
L.RYX
[email protected] EA
3.92
A
L.OZX
3/8" drive, 9mm, 12-point Metric standard length socket.
Surface drive technology reduces fastener rounding.
Chrome Vanadium alloy steel for long lasting durability.
Nickel chrome plated for long lasting protection. Length:
3.50". Width: .71lb. Height: 1.69". Mechanics hand tool.
Meets ANSI and ASME specifications. All sockets on hang tag holder.
Guaranteed forever.
ITEM #
389250
CDS39 SOCKET 9MM 12 PT 3/8IN DRIVE
DESC
389269
CDS40 SOCKET 10MM 12 PT 3/8IN DRIVE
389277
CDS41 SOCKET 11MM 12 PT 3/8IN DRIVE
389285
CDS42 SOCKET 12MM 12 PT 3/8IN DRIVE
389293
CDS43 SOCKET 13MM 12 PT 3/8IN DRIVE
389307
CDS44 SOCKET 14MM 12 PT 3/8IN DRIVE
389315
CDS45 SOCKET 15MM 12 PT 3/8IN DRIVE
389323
CDS46 SOCKET 16MM 12 PT 3/8IN DRIVE
389331
CDS47 SOCKET 17MM 12 PT 3/8IN DRIVE
389358
CDS48 SOCKET 18MM 12 PT 3/8IN DRIVE
389382
CDS49 SOCKET 19MM 12 PT 3/8IN DRIVE
389390
CDS51 SOCKET 21MM 12 PT 3/8IN DRIVE
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
1.35
C.XLX
1.34
C.XZZ
1.35
C.XLX
1.35
C.XLX
1.35
C.XCX
1.35
C.XLX
1.54
C.CRX
1.54
C.CRX
1.54
C.CRX
1.54
C.CRX
1.54
C.CRX
1.69
C.LAX
APEX CRESCENT SOCKET DRIVE
3/8" drive, 9mm, 6-point Metric deep length socket. Surface drive
technology reduces fastener rounding. Chrome Vanadium alloy steel
for long lasting durability. Nickel chrome plated for long lasting
protection. Mechanics hand tool. Meets ANSI and ASME
specifications. All sockets on hang tag holder. Guaranteed forever.
ITEM #
389412
CDDS39 DEEP SOCKET 9MM 6PT 3/8IN DRIVE
DESC
389420
CDDS40 DEEP SOCKET 10MM 6PT 3/8IN DRIVE
389447
CDDS41 DEEP SOCKET 11MM 6PT 3/8IN DRIVE
389455
CDDS42 DEEP SOCKET 12MM 6 PT 3/8IN DRIVE
389463
CDDS43 DEEP SOCKET 13MM 6PT 3/8IN DRIVE
389471
CDDS44 DEEP SOCKET 14MM 6PT 3/8IN DRIVE
389498
CDDS45 DEEP SOCKET 15MM 6PT 3/8IN DRIVE
389501
CDDS46 DEEP SOCKET 16MM 6PT 3/8IN DRIVE
389528
CDDS47 DEEP SOCKET 17MM 6PT 3/8IN DRIVE
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
2.03
A
C.EOX
[email protected] EA
2.01
A
C.EXZ
[email protected] EA
2.03
A
C.EOX
[email protected] EA
2.03
A
C.ELX
[email protected] EA
2.01
A
C.EXZ
[email protected] EA
2.03
A
C.ELX
[email protected] EA
2.36
A
C.HZX
[email protected] EA
2.36
A
C.HYX
[email protected] EA
2.36
A
C.HZX
103
Hand & Power Tools
Wrenches, 3/8" Socket Wrenches and
Accessories, Metric Sockets
APEX CRESCENT SOCKET DRIVE (continued)
ITEM #
389536
389544
DESC
SP UOM PRICE
CDDS48 DEEP SOCKET 18MM 6PT 3/8IN DRIVE [email protected] EA 2.36
A
C.HZX
CDDS49 DEEP SOCKET 19MM 6PT 3/8IN DRIVE [email protected] EA 2.36
A
C.HZX
Wrenches, 3/8" Socket Wrenches and
Accessories, Spark Plug Sockets
Wrenches, 3/8" Socket Wrenches and
Accessories, Star Sockets
GREAT NECK 3/8" DRIVE STAR SOCKET
T-55 Star Socket. Heat treated for strength and
durability.
ITEM #
166855
2017 SOCKET 3/8IN DRIVE W/SCREW T40
DESC
168068
2020 SOCKET 3/8IN DRIVE W/SCREW T55
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
3.55
L.CXZ
3.55
L.CXZ
GREAT NECK SPARK PLUG SOCKET
3/8" Drive Neoprene insert. Chrome vanadium
contruction. 13/16" Socket.
APEX CRESCENT 3/8" DRIVE HEX BIT SOCKET
ITEM #
161322
Chrome Vanadium alloy steel socket base for long lasting durability.
Nickel chrome plated socket base for long lasting protection.
161314
DESC
SPS38 SPARK PLUG SOCKET
3/8IN
SPS58 SPARK PLUG SOCKET
5/8IN
INFO
SP UOM PRICE
13/16" SOCKET" [email protected] EA
3.43
A
L.XOX
5/8" SOCKET" [email protected] EA
2.94
A
C.HVX
GREAT NECK UNIVERSAL SPARK PLUG
SOCKET
3/8" Drive. Neoprene Insert Heat treated for strength and durability.
ITEM #
163511
DESC
SP UOM PRICE
[email protected] EA
6.61
A
O.YLX
USP58 SPARK PLUG SOCKET UNIVERSAL
5/8IN
GREAT NECK SWIVEL HEAD SPARK
PLUG SOCKET
ITEM #
402634
CHBS0 3/8" DRIVE, 1/8" HEX BIT SOCKET
DESC
402635
CHBS1 3/8" DRIVE, 5/32" HEX BIT SOCKET
402639
CHBS2 3/8" DRIVE, 3/16" HEX BIT SOCKET
402640
CHBS3 3/8" DRIVE, 7/32" HEX BIT SOCKET
402641
CHBS4 3/8" DRIVE, 1/4" HEX BIT SOCKET
402642
CHBS5 3/8" DRIVE, 5/16" HEX BIT SOCKET
402643
CHBS6 3/8" DRIVE, 3/8" HEX BIT SOCKET
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
1.68
C.LAX
1.68
C.LAX
1.68
C.LRX
1.68
C.LAX
1.68
C.LAX
2.01
C.ELX
2.35
C.HZX
3/8" Drive. Vinyl dipped t-handle for comfort. Neporene insert for easy spark
plug removal.
ITEM #
163481
DESC
SP UOM PRICE
7.47
A
V.VOX
US58 SPARK PLUG SOCKET UNIVERSAL 5/8IN [email protected] EA
APEX CRESCENT 3/8" DRIVE METRIC HEX BIT
SOCKET
Chrome Vanadium alloy steel socket base for long lasting durability.
Nickel chrome plated socket base for long lasting protection.
APEX CRESCENT SPARK PLUG SOCKETS
3/8" drive, 5/8" fastener size. Chrome Vanadium alloy
steel sockets. Surface Drive(R) technology reduces - fastener rounding. 6point. Nickel chrome plated finish. Meets ANSI and ASME specifications. All
sockets on hang tag holder.
ITEM #
402644
ITEM #
389234
402646
394181
389242
104
DESC
CSPS0 SPARK PLUG SOCKET 5/8IN 3/8IN
DRIVE
CSPS1 SPARK PLUG SOCKET 3/4IN
CSPS2 SPARK PLUG SOCKET 13/16IN 3/8IN
DRIVE
SP UOM PRICE
[email protected] EA
2.70
A
L.XOX
[email protected] EA
2.70
A
L.XEX
[email protected] EA
2.70
A
L.XOX
402645
402636
402637
402638
DESC
SP UOM PRICE
[email protected] EA
1.68
A
C.LRX
CHBS8 3/8" DRIVE, 5MM HEX BIT SOCKET
[email protected] EA
1.68
A
C.LRX
CHBS9 3/8" DRIVE, 6MM HEX BIT SOCKET
[email protected] EA
1.68
A
C.LAX
CHBS10 3/8" DRIVE, 7MM HEX BIT SOCKET [email protected] EA
1.68
A
C.LAX
CHBS11 3/8" DRIVE, 8MM HEX BIT SOCKET [email protected] EA
1.68
A
C.LAX
CHBS12 3/8" DRIVE, 10MM HEX BIT SOCKET [email protected] EA
1.68
A
C.LAX
CHBS7 3/8" DRIVE, 4MM HEX BIT SOCKET
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Wrenches, 3/8" Socket Wrenches and
Accessories, Ratchets
Wrenches, 3/8" Socket Wrenches and
Accessories, Ratchets
GREAT NECK 3/8" DRIVE QUICK
RELEASE RATCHET
APEX CRESCENT QUICK RELEASE DUAL
MATERIAL RATCHET
Professional quality. Chrome vanadium steel. Push
button quick release. 8" length.
3/8" Drive quick release, dual material ratchet. 72
Tooth for 5? of access. Chrome vanadium alloy steel for long lasting durability.
Nickel chrome plated for long lasting protection. Head width: 2". Overall
length: 10.74". Meets ANSI and ASME specifications. Guaranteed forever.
ITEM #
163465
DESC
RS038 RATCHET PRO 3/8IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
18.73
CZ.CZX
ITEM #
389714
DESC
SP UOM PRICE
11.54
A.ERX
CRW7 RATCHET 3/8IN DR 72 TOOTH DUAL MTL [email protected] EA
HDL
A
GREAT NECK 3/8" DRIVE RATCHET
Reversible Ratchet. Chrome plated high carbon steel 8" length. Knurled
spinner ring.
ITEM #
161330
DESC
SP
[email protected]
RA38 RATCHET HD 8IN 3/8IN DRIVE
UOM
EA
A
PRICE
10.65
R.CYX
GREAT NECK 3/8" DRIVE EXTENSION
BAR
10" Extension Bar. Heat treated chrome vanadium steel for strength and
durability.
ITEM #
160423
EX30 EXTENSION BAR 3IN
SP
[email protected]
GREAT NECK 3/8" DRIVE FLEX HANDLE
160431
EX38 EXTENSION BAR 6IN 3/8 DRIVE
[email protected]
9 1/2" Flex Handle. Heat treated for strength and durability. Chrome plated.
160458
EX308 EXTENSION 10IN 3/8 DRIVE
[email protected]
ITEM #
160415
DESC
FL38 HANDLE 8-1/2FLEX 3/8IN DRIVE
SP
[email protected]
UOM
EA
A
DESC
UOM
EA
A
EA
A
EA
A
PRICE
3.79
L.LRX
3.96
L.OAX
6.00
O.EZX
UOM
EA
A
EA
A
EA
A
PRICE
2.35
C.HRX
3.37
L.EOX
5.40
V.XVX
PRICE
10.04
E.YEX
APEX CRESCENT EXTENSION BAR
APEX CRESCENT FLEX HANDLE
BREAKER BAR
3/8" Drive, Flex Handle, 10" Breaker Bar. Chrome vanadium alloy steel breaker
bar. Offers long lasting durability. Nickel chrome plated for long lasting
durability. Overall length: 11.81"
ITEM #
389722
DESC
CRW15 BREAKER BAR 10IN 3/8IN DRIVE FLEX
HDL
SP UOM PRICE
[email protected] EA
10.26
A
H.ROX
APEX CRESCENT QUICK RELEASE
RATCHET
3/8" Drive, 3" Extension. Chrome vanadium alloy steel
for long lasting durability. Nickel chrome plated for long
lasting protection. Overall length: 5.32". Meets ANSI
and ASME specifications. Guaranteed forever.
ITEM #
389730
CDTA8 EXTENSION 3IN 3/8IN DRIVE
DESC
SP
[email protected]
389749
CDTA9 EXTENSION 6IN 3/8IN DRIVE
[email protected]
389757
CDTA10 EXTENSION 10IN 3/8IN DRIVE
[email protected]
APEX CRESCENT 3 PC EXTENSION BAR SET
3/8" Drive quick release ratchet. 72 Tooth for 5? of access. Chrome vanadium
alloy steel for long lasting durability. Nickel chrome plated for long lasting
protection. Head width: 2". Overall length: 10.24". Meets ANSI and ASME
specifications. Guaranteed forever.
3/8" drive: 3", 6", and 10" extension. Meets ANSI and ASME
specifications. Guaranteed forever.
ITEM #
389552
ITEM #
394459
DESC
CRW6 RATCHET 3/8IN DR 72 TOOTH POLISH
HDL
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
10.11
A
H.EZX
DESC
SP UOM PRICE
10.26
A
H.HAX
CDTA15 EXTENSION BAR SET 3/8IN DRIVE 3PC [email protected] ST
1-800-776-0976 NOVEMBER
2016
105
Hand & Power Tools
Wrenches, 3/8" Socket Wrenches and
Accessories, Universal Joints
GREAT NECK 3/8" DRIVE UNIVERSAL
JOINT
GREAT NECK 3/8" DRIVE ADAPTER
3/8" (F) x 1/4" (M). Heat treated chrome vanadium
construction for strength and durability.
3/8" Drive. Heat treated for strength and durability.
ITEM #
160466
DESC
SP
[email protected]
UJ38 UNIVERSAL JOINT 3/8IN DRIVE
UOM
EA
A
PRICE
4.90
L.AZX
DESC
SP
[email protected]
CDTA17 UNIVERSAL JOINT 3/8IN DRIVE
ITEM #
163449
UOM
EA
A
PRICE
4.70
O.ECX
APEX CRESCENT 3/8" DRIVE TORX BIT SOCKET
Chrome Vanadium alloy steel socket base for long lasting durability.
Nickel chrome plated socket base for long lasting protection.
402631
402632
402633
402624
402625
DESC
AD25 ADAPTOR 1/4MALEX3/8FEM
SP
[email protected]
UOM
EA
A
PRICE
2.33
C.OAX
SP
[email protected]
UOM
EA
A
PRICE
2.45
C.VZX
3/8"F x 1/2"M Adapter. 3/8" Drive. Heat Treated for
strength. Plastic hang tab package.
3/8" Drive universal joint. Maximum operation angle of 45?.
Chrome vanadium alloy steel for long lasting durability. Nickel
chrome plated for long lasting protection. Overall length: 4.33".
Meets ANSI and ASME specifications. Guaranteed forever.
ITEM #
402630
ITEM #
163570
GREAT NECK 3/8" DRIVE ADAPTER
APEX CRESCENT UNIVERSAL JOINT
ITEM #
389781
Wrenches, 3/8" Socket Wrenches and
Accessories, Drive Adapters
DESC
SP UOM PRICE
[email protected] EA
2.01
A
C.ELX
[email protected] EA
2.01
A
C.EOX
[email protected] EA
2.01
A
C.ELX
[email protected] EA
2.01
A
C.ELX
[email protected] EA
2.01
A
C.ELX
[email protected] EA
2.01
A
C.EOX
CDTS6 3/8" DRIVE, T-40 INTERNAL TORX
SOCKET
CDTS7 3/8" DRIVE, T-45 INTERNAL TORX
SOCKET
CDTS8 3/8" DRIVE, T-47 INTERNAL TORX
SOCKET
CDTS9 3/8" DRIVE, T-50 INTERNAL TORX
SOCKET
CDTS10 3/8" DRIVE, T-55 INTERNAL TORX
SOCKET
CDTS11 3/8" DRIVE, T-60 INTERNAL TORX
SOCKET
Wrenches, 3/8" Socket Wrenches and
Accessories, Drive Adapters
DESC
AD38 ADAPTOR 3/8FEMX1/2MALE
APEX CRESCENT ADAPTER
3/8" Drive F x 1/2" Drive M adapter. Chrome vanadium alloy steel
for long lasting durability. Nickel chrome plated for long lasting
protection. Overall length: 3.74". Meets ANSI and ASME
specifications. Guaranteed forever.
ITEM #
389773
DESC
CDTA2 ADAPTER 3/8IN F X 1/2IN M
SP
[email protected]
UOM
EA
A
PRICE
2.66
C.YZX
Wrenches, 3/8" Socket Wrenches and
Accessories, Socket Sets
APEX CRESCENT 7 PC HEX BIT SOCKET
SET
3/8" drive, SAE set includes: 1/8", 1/2", 5/32", 3/16",
7/32", 1/4", 15/16", 3/8" and storage rack. Meets ANSI and ASME specifications.
Guaranteed forever.
ITEM #
394467
DESC
SP UOM PRICE
13.67
CX.CRX
CBSS0 HEX BIT SOCKET SET SAE 3/8IN DRIVE [email protected] ST
7PC
A
APEX CRESCENT ADAPTER
APEX CRESCENT 9 PC SOCKET SET
3/8" Drive F x 1/4" Drive M adapter. Chrome vanadium alloy
steel for long lasting durability. Nickel chrome plated for long
lasting protection. Overall length: 3.39". Meets ANSI and ASME
specifications. Guaranteed forever.
3/8" drive, 6-point standard SAE socket set includes: 1/4", 5/16", 3/8",
7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and storage rack. Meets ANSI and
ASME specifications. Guaranteed forever.
ITEM #
389765
106
DESC
CDTA1 ADAPTER 3/8IN F X 1/4IN M
SP
[email protected]
UOM
EA
A
PRICE
2.13
C.RCX
ITEM #
394289
DESC
SP UOM PRICE
12.08
A
Y.XHX
CSAS4 SOCKET SET 12PT 3/8IN DRIVE SAE 9PC [email protected] ST
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Wrenches, 3/8" Socket Wrenches and
Accessories, Socket Sets
APEX CRESCENT 9 PC SOCKET SET
3/8" drive, 6-point standard Metric socket set includes: 9, 10, 11, 12, 13,
14, 15, 17, 19mm and storage rack. Meets ANSI and ASME
specifications. Guaranteed forever
ITEM #
394297
DESC
SP UOM PRICE
12.08
A
Y.XHX
CSAS5 SOCKET SET 12PT 3/8IN DRIVE MM 9PC [email protected] ST
Wrenches, 3/8" Socket Wrenches and
Accessories, Socket Sets
CHANNELLOCK 3/8" DRIVE SAE SOCKET
SET
Set includes: (7) 6 pt. Standard Sockets: 3/8, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4 inch, (7) 6 pt. Deep Sockets: 3/8,
7/16, 1/2, 9/16, 5/8, 11/16, 3/4 inch, (1) 3 inch (76 mm)
Extension, (1) 6 inch (152 mm) Extension, (1) 5/8 inch Spark Plug Socket, (1)
Quick Release 45 gear teeth ratchet, Durable steel storage case with molded
inlay.
ITEM #
301324
DESC
SP
UOM
38181 18PC 3/8" DR SAE SET, SOCKET SET [email protected] EA
A
PRICE
45.27
OV.XOX
APEX CRESCENT 9 PC SOCKET SET
3/8" drive, 6-point deep SAE socket set includes: 1/4",
5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and
storage rack. Meets ANSI and ASME specifications. Guaranteed forever.
ITEM #
394300
DESC
SP UOM PRICE
16.09
A
CL.XAX
Wrenches, 1/2" Socket Wrenches and
Accessories, Standard Sockets
CSAS6 SOCKET SET 6PT 3/8IN DRIVE SAE 9PC [email protected] ST
APEX CRESCENT 7 PC HEX BIT SOCKET
SET
GREAT NECK 1/2" DRIVE-6 POINT DEEP
WALL SOCKET
3/8" drive, Metric set includes: 3, 1, 5, 6, 7, 8, 10mm
and storage rack. Meets ANSI and ASME specifications. Guaranteed forever.
Chrome vanadium steel construction. Great Neck
sockets feature Posi-grip No Slip design. The socket
wall design provides superior gripping power without
rounding the fastener points. Torque is applied to the walls of the fastener
head.
ITEM #
394491
DESC
CBSS1 HEX BIT SOCKET SET MM 3/8IN DRIVE
7PC
SP UOM PRICE
[email protected] ST
13.67
A
CX.CRX
ITEM #
160490
SK30 SOCKET 3/8IN 6PT-12 DR
SP
[email protected]
160512
SK32 SOCKET 1/2IN 6PT 1/2IN DRIVE
[email protected]
160520
SK33 SOCKET 9/16IN 6PT 1/2IN DRIVE
[email protected]
160547
SK35 SOCKET 11/16IN 6PT 1/2IND
[email protected]
160555
SK36 SOCKET 6PT 3/4-1/2IN DRIVE
[email protected]
160563
SK37 SOCKET 6PT 13/16-1/2IN DRIVE
[email protected]
160598
SK39 SOCKET 6PT 15/16-1/2 DRIVE
[email protected]
160601
SK40 SOCKET 6PT 1IN-1/2 DRIVE
[email protected]
APEX CRESCENT 20 PC SOCKET WRENCH SET
160628
SK41 SOCKET 6PT 1-1/16-1/2IN DRIVE
[email protected]
3/8" drive, 12-point SAE/Metric socket wrench set includes: 3/8"
drive, 72-Tooth quick-release ratchet, 3/8" drive, 3" extension, 3/8"
drive, 12-Pt sockets: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4",
13/16",; 9, 10, 11, 12, 13, 14, 15, 17, 19mm and storage rack. Meets
ANSI and ASME specifications. Guaranteed forever.
160636
SK42 SOCKET 6PT 1-1/8 1/2IN DRIVE
[email protected]
160644
SK43 SOCKET 6PT 1-1/4 1/2IN DRIVE
[email protected]
APEX CRESCENT 9 PC SOCKET SET
3/8" drive, 6-point deep Metric socket set includes: 9,
10, 11, 12, 13, 14, 15, 17, 19mm and storage rack. Meets
ANSI and ASME specifications. Guaranteed forever
ITEM #
394319
ITEM #
394211
DESC
CSAS7 SOCKET SET 6PT 3/8IN DRIVE MM 9PC
DESC
CSWS7 SOCKET WRENCH SET SAE/MM 3/8IN
DRIVE 20PC
www.wallacehardware.com
SP UOM PRICE
[email protected] ST
16.09
A
CL.XAX
DESC
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
3.55
L.CXZ
3.55
L.CXZ
3.55
L.CXZ
3.55
L.CXZ
3.92
L.OZX
3.92
L.OZX
4.16
L.VEX
4.41
L.RLX
4.65
L.HRX
5.02
L.YAX
5.63
O.OVX
SP UOM PRICE
[email protected] ST
23.98
A
CH.YEX
1-800-776-0976 NOVEMBER
2016
107
Hand & Power Tools
Wrenches, 1/2" Socket Wrenches and
Accessories, Standard Sockets
GREAT NECK 1/2" DRIVE 6 PT DEEP
IMPACT SOCKET
APEX CRESCENT SOCKET DRIVE
OEM 1/2" Drive Deep Impact Socket. Constructed of high impact grade chrome
moly steel. Chamfered end for quick engagement. OEM sockets feature Posigrip No Slip design. The socket wall design provides superior gripping power
without rounding the fastener points. Torque is applied to the walls of the
fastener head.
ITEM #
534013
DESC
6513 DEEP IMPACT SOCKET 5/8IN
160776
SK50 DEEP WELL SOCKET 6P 1/2IN-1/2
DRIVE
SK51 SOCKET 6PT 9/16IN 1/2IN DRIVE
WELL
SK52 SOCKET 6PT 5/8-1/2 DRIVE DEEP
WELL
SK53 SOCKET 11/16IN 1/2IN DRIVE
DEEP WELL
SK54 SOCKET 6PT 3/4IN 1/2IN DRIVE
DEEP WELL
SK55 SOCKET 6PT 13/16IN 1/2IN DRIVE
DEEP WELL
SK56 SOCKET 6PT 7/8IN 1/2IN DRIVE
DEEP WELL
SK57 SOCKET 6PT 15/16IN 1/2IN DRIVE
DEEP WELL
SK58 SOCKET 1IN 6PT 1/2IN DRIVE
160784
SK59 SOCKET 6PT 1-1/16IN 1/2 DRIVE
163392
SK60 SOCKET DPWL 6PT 1-1/8IN
163406
SK61 DEEP WELL SOCKET SAE 6PT 11/4
160792
160806
160814
160822
160830
160849
160857
160865
Wrenches, 1/2" Socket Wrenches and
Accessories, Standard Sockets
INFO SP UOM PRICE
[email protected] EA
6.90
A
V.CXZ
[email protected] EA
4.16
A
L.VHX
[email protected] EA
4.41
A
L.RLX
[email protected] EA
4.41
A
L.RLX
[email protected] EA
4.65
A
L.HRX
[email protected] EA
4.90
A
L.YXZ
[email protected] EA
5.14
A
O.XEX
[email protected] EA
5.39
A
O.CYX
[email protected] EA
6.24
A
O.HCX
[email protected] EA
7.10
A
V.LCX
[email protected] EA
12.00
A
H.CLX
[email protected] EA
12.73
A
H.EZX
1-1/4"" [email protected] EA
16.28
A
Y.RZX
1/2" drive, 7/16", 12-point SAE standard length socket. Surface drive
technology reduces fastener rounding. Chrome Vanadium alloy
steel for long lasting durability. Nickel chrome plated for long
lasting protection. Mechanics hand tool. Meets ANSI and ASME
specifications. All sockets on hang tag holder. Guaranteed forever.
ITEM #
390348
CDS53 SOCKET 7/16IN 12PT 1/2IN DRIVE
DESC
390356
CDS54 SOCKET 1/2IN 12PT 1/2IN DRIVE
390364
CDS55 SOCKET 9/16IN 12PT 1/2IN DRIVE
390380
CDS56 SOCKET 5/8IN 12PT 1/2IN DRIVE
390402
CDS57 SOCKET 11/16IN 12PT 1/2IN DRIVE
390410
CDS58 SOCKET 3/4IN 12PT 1/2IN DRIVE
390437
CDS59 SOCKET 13/16IN 12PT 1/2IN DRIVE
390445
CDS60 SOCKET 7/8IN 12PT 1/2IN DRIVE
390461
CDS61 SOCKET 15/16IN 12PT 1/2IN DRIVE
390518
CDS62 SOCKET 1IN 12PT 1/2IN DRIVE
390526
CDS63 SOCKET 1-1/16IN 12PT 1/2IN DRIVE
390534
CDS64 SOCKET 1-1/8IN 12PT 1/2IN DRIVE
391069
CDS66 SOCKET 1-1/4IN 12PT 1/2IN DRIVE
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
2.03
C.ELX
2.03
C.ELX
2.03
C.ELX
2.03
C.EOX
2.03
C.EOX
2.01
C.ELX
2.03
C.EOX
2.36
C.HZX
2.35
C.HRX
2.70
L.XOX
2.70
L.XOX
2.91
L.CAX
3.39
L.EZX
APEX CRESCENT SOCKET DRIVE
1/2" drive, 7/16", 6-point SAE deep length socket. Surface drive
technology reduces fastener rounding. Chrome Vanadium alloy steel
for long lasting durability. Nickel chrome plated for long lasting
protection. Mechanics hand tool. Meets ANSI and ASME
specifications. All sockets on hang tag holder. Guaranteed forever.
ITEM #
390003
APEX 1/4" SHANK 1/2" MAGNETIC
SQUARE DRIVE SOCKETS
390119
For SAE hex nuts. 1/4" broached opening. Overall length: 7/8". Nose end
diameter: 3/8". Drive end diameter: 1/2". Fixed magnet.
ITEM #
385530
DESC
MX-1108 SOCKET MAGNETIC 1/4IN
SP
[email protected]
UOM
EA
A
PRICE
14.53
Y.RAX
390127
390135
390143
390151
390178
390186
390194
390208
108
DESC
SP UOM PRICE
2.85
A
L.CRX
CDDS56 DEEP SOCKET 1/2IN 6PT 1/2IN DRIVE [email protected] EA 2.85
A
L.CRX
CDDS57 DEEP SOCKET 9/16IN 6PT 1/2IN DRIVE [email protected] EA 2.85
A
L.CVX
CDDS58 DEEP SOCKET 5/8IN 6PT 1/2IN DRIVE [email protected] EA 2.85
A
L.CRX
CDDS59 DEEP SOCKET 11/16IN 6PT 1/2IN DRIVE [email protected] EA 3.04
A
L.OCX
CDDS60 DEEP SOCKET 3/4IN 6PT 1/2IN DRIVE [email protected] EA 3.02
A
L.LRX
CDDS61 DEEP SOCKET 13/16IN 6PT 1/2IN DRIVE [email protected] EA 3.02
A
L.LAX
CDDS62 DEEP SOCKET 7/8IN 6PT 1/2IN DRIVE [email protected] EA 3.39
A
L.EOX
CDDS63 DEEP SOCKET 15/16IN 6PT 1/2IN
[email protected] EA
3.37
A
L.EOX
CDDS64 DEEP SOCKET 1IN 6PT 1/2IN DRIVE
[email protected] EA
4.04
A
O.XEX
CDDS55 DEEP SOCKET 7/16IN 6PT 1/2IN DRIVE [email protected] EA
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Wrenches, 1/2" Socket Wrenches and
Accessories, Standard Sockets
APEX CRESCENT SOCKET DRIVE (continued)
ITEM #
390216
390305
390321
DESC
SP UOM PRICE
CDDS65 DEEP SOCKET 1-1/6IN 6PT 1/2IN DRIVE [email protected] EA 4.73
A
O.EAX
CDDS66 DEEP SOCKET 1-1/8IN 6PT 1/2IN DRIVE [email protected] EA 4.73
A
O.EZX
CDDS67 DEEP SOCKET 1-1/4IN 6PT 1/2IN DRIVE [email protected] EA 6.09
A
V.RXZ
1/2 inch drive. 6-point impact socket. Corrosion resistant black
oxide coating. Laser markings or easy size identification. For
use with impact drivers. Exceeds ASME specifications.
ITEM #
538221
CIMS4 IMPACT SOCKET 7/16IN 6 PT 1/2IN DR
538299
CIMS5 IMPACT SOCKET 1/2IN 6 PT 1/2IN DRIVE
538302
CIMS6 IMPACT SOCKET 9/16IN 6 PT 1/2IN DR
538310
CIMS7 IMPACT SOCKET 5/8IN 6 PT 1/2IN DRIVE
538329
CIMS8 IMPACT SOCKET 11/16IN 6 PT 1/2IN DR
538337
CIMS9 IMPACT SOCKET 3/4IN 6 PT 1/2IN DRIVE
538469
CIMS10 IMPACT SOCKET 13/16IN 6 PT 1/2IN DR
538477
CIMS11 IMPACT SOCKET 7/8IN 6 PT 1/2IN DRIVE
538663
CIMS20 DEEP IMPACT SOCKET 7/16IN 1/2DR
6PT
CIMS21 DEEP IMPACT SOCKET 1/2IN 1/2DR 6
PT
CIMS22 DEEP IMPACT SOCKET 9/16IN 1/2DR
6PT
CIMS23 DEEP IMPACT SOCKET 5/8IN 1/2DR 6
PT
CIMS24 DEEP IMPACT SOCKET 11/16IN 1/2DR
6PT
CIMS25 DEEP IMPACT SOCKET 3/4IN 1/2DR 6
PT
CIMS26 DEEP IMPACT SOCKET 13/16IN 1/2DR
6PT
CIMS27 DEEP IMPACT SOCKET 7/8IN 1/2DR 6
PT
538698
538701
538728
538736
538744
538752
GREAT NECK 1/2" DRIVE 6 PT DEEP
WELL METRIC SOCKETS
Great Neck Deep Wall Metric Socket. 1/2" Drive 6 Point. Chrome vanadium
steel construction. Great Neck sockets feature Posi-grip No Slip design. The
socket wall design provides superior gripping power without rounding the
fastener points. Torque is applied to the walls of the fastener head.
ITEM #
186295
2092 SOCKET DPWL 12MM 1/2INDRV
DESC
186376
2099 DEEP WELL SOCKET 19MM 1/2INDRV
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
4.53
L.RYX
4.65
L.HRX
SP UOM PRICE
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
1/2'' Drive. 6 Point. Chrome vanadium steel
construction. Great Neck sockets feature Posi-grip No
Slip design. The socket wall design provides superior gripping power without
rounding the fastener points. Torque is applied to the walls of the fastener
head.
ITEM #
163341
2070 SOCKET 10MM 6PT 1/2IN DRIVE
SP
[email protected]
163368
2071 SOCKET 11MM 6PT 1/2IN DRIVE
[email protected]
160687
2075 SOCKET 15MM 6PT 1/2IN DRIVE
[email protected]
160709
2077 SOCKET 17MM 6PT 1/2IN DRIVE
[email protected]
160717
2078 SOCKET 18MM 6PT 1/2IN DRIVE
[email protected]
160725
2080 SOCKET 19MM 6PT 1/2IN DRIVE
[email protected]
160768
2085 SOCKET 24MM 6PT 1/2IN DRIVE
[email protected]
DESC
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
2.33
C.OAX
2.33
C.OAX
2.33
C.OAX
3.18
C.AZX
2.57
C.ELX
3.18
C.AZX
4.16
L.VHX
GREAT NECK 1/2" DRIVE METRIC
SOCKET
6 Pt Deep Well. 1/2" Drive. Chrome vanadium steel construction. Great Neck
sockets feature Posi-grip No Slip design. The socket wall design provides
superior gripping power without rounding the fastener points. Torque is
applied to the walls of the fastener head.
ITEM #
186279
186325
186368
186384
186406
186414
www.wallacehardware.com
DESC
GREAT NECK 1/2" DRIVE METRIC
SOCKET
APEX CRESCENT IMPACT SOCKET
538671
Wrenches, 1/2" Socket Wrenches and
Accessories, Metric Sockets
DESC
2090 DEEP WELL SOCKET 10MM 1/2IN DRIVE
6PT
2095 DEEP WELL SOCKET 15MM 1/2IN DRIVE
6PT
2098 DEEP WELL SOCKET 18MM 1/2IN DRIVE
6PT
2102 DEEP WELL SOCKET 20MM 1/2IN DRIVE
6PT
2104 DEEP WELL SOCKET 22MM 1/2IN DRIVE
6PT
2105 DEEP WELL SOCKET 23MM 1/2IN DRIVE
6PT
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
4.77
A
L.AOX
[email protected] EA
4.53
A
L.RYX
[email protected] EA
5.02
A
L.YAX
[email protected] EA
5.02
A
L.YAX
[email protected] EA
6.24
A
O.HCX
[email protected] EA
6.49
A
O.AEX
109
Hand & Power Tools
Wrenches, 1/2" Socket Wrenches and
Accessories, Metric Sockets
Wrenches, 1/2" Socket Wrenches and
Accessories, Metric Sockets
GREAT NECK 1/2" DRIVE METRIC SOCKET (continued)
APEX CRESCENT SOCKET DRIVE (continued)
ITEM #
186422
ITEM #
391905
DESC
SP UOM PRICE
[email protected] EA
6.49
A
O.AEX
2106 DEEP WELL SOCKET 24MM 1/2IN DRIVE
6PT
391913
DESC
SP UOM PRICE
3.04
A
L.LAX
CDDS80 DEEP SOCKET 21MM 6PT 1/2IN DRIVE [email protected] EA 3.39
A
L.EZX
CDDS78 DEEP SOCKET 19MM 6PT 1/2IN DRIVE [email protected] EA
APEX CRESCENT SOCKET DRIVE
1/2" drive, 12mm, 12-point Metric standard length socket. Surface
drive technology reduces fastener rounding. Chrome Vanadium
alloy steel for long lasting durability. Nickel chrome plated for long
lasting protection. Mechanics hand tool. Meets ANSI and ASME
specifications. All sockets on hang tag holder. Guaranteed forever.
ITEM #
391093
CDS72 SOCKET 12MM 12PT 1/2IN DRIVE
DESC
391107
CDS73 SOCKET 13MM 12PT 1/2IN DRIVE
391115
CDS74 SOCKET 14MM 12PT 1/2IN DRIVE
391123
CDS75 SOCKET 15MM 12PT 1/2IN DRIVE
391158
CDS76 SOCKET 16MM 12PT 1/2IN DRIVE
391166
CDS77 SOCKET 17MM 12PT 1/2IN DRIVE
391174
CDS78 SOCKET 18MM 12PT 1/2IN DRIVE
391182
CDS79 SOCKET 19MM 12PT 1/2IN DRIVE
391190
CDS80 SOCKET 20MM 12PT 1/2IN DRIVE
391204
CDS81 SOCKET 21MM 12PT 1/2IN DRIVE
391212
CDS82 SOCKET 22MM 12PT 1/2IN DRIVE
391220
CDS84 SOCKET 24MM 12 PT 1/2IN DRIVE
391239
CDS87 SOCKET 27MM 12PT 1/2IN DRIVE
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
APEX CRESCENT IMPACT SOCKET
1/2" drive 6-point impact socket.
PRICE
2.03
C.EOX
2.03
C.EOX
2.03
C.EOX
2.03
C.EOX
2.03
C.EOX
2.03
C.EOX
2.36
C.HZX
2.36
C.HYX
2.36
C.HYX
2.70
L.XEX
2.70
L.XOX
2.91
L.LXZ
3.39
L.EAX
538493
538507
538531
538558
538566
538647
538655
DESC
CIMS12 IMPACT SOCKET 12MM 1/2IN DRIVE 6
PT
CIMS13 IMPACT SOCKET 13MM 1/2IN DRIVE 6
PT
CIMS14 IMPACT SOCKET 14MM 1/2IN DRIVE 6
PT
CIMS15 IMPACT SOCKET 15MM 1/2IN DRIVE 6
PT
CIMS16 IMPACT SOCKET 17MM 1/2IN DRIVE 6
PT
CIMS17 IMPACT SOCKET 18MM 1/2IN DRIVE 6
PT
CIMS18 IMPACT SOCKET 19MM 1/2IN DRIVE 6
PT
CIMS19 IMPACT SOCKET 21MM 1/2IN DRIVE 6
PT
SP UOM PRICE
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
[email protected] EA
2.42
A
C.AVX
APEX CRESCENT DEEP IMPACT SOCKET
1/2" drive 6-point impact socket.
APEX CRESCENT SOCKET DRIVE
1/2" drive, 13mm, 6-point Metric deep length socket. Surface drive
technology reduces fastener rounding. Chrome Vanadium alloy steel
for long lasting durability. Nickel chrome plated for long lasting
protection. Mechanics hand tool. Meets ANSI and ASME
specifications. All sockets on hang tag holder. Guaranteed forever.
ITEM #
391247
CDDS72 DEEP SOCKET 13MM 6PT 1/2IN DRIVE
391255
CDDS73 DEEP SOCKET 14MM 6PT 1/2IN DRIVE
391263
CDDS74 DEEP SOCKET 15MM 6PT 1/2IN DRIVE
391743
CDDS75 DEEP SOCKET 16MM 6PT 1/2IN DRIVE
391875
CDDS76 DEEP SOCKET 17MM 6PT 1/2IN DRIVE
391891
CDDS77 DEEP SOCKET 18MM 6PT 1/2IN DRIVE
110
ITEM #
538485
DESC
SP UOM PRICE
[email protected] EA
2.85
A
L.CRX
[email protected] EA
2.85
A
L.CRX
[email protected] EA
2.85
A
L.CRX
[email protected] EA
2.85
A
L.CRX
[email protected] EA
3.04
A
L.OCX
[email protected] EA
3.04
A
L.LRX
ITEM #
538760
538779
538787
538809
538817
538833
538841
538868
DESC
CIMS28 DEEP IMPACT SOCKET 12MM 1/2IN DR
6PT
CIMS29 DEEP IMPACT SOCKET 13MM 1/2IN DR
6PT
CIMS30 DEEP IMPACT SOCKET 14MM 1/2IN DR
6PT
CIMS31 DEEP IMPACT SOCKET 15MM 1/2IN DR
6PT
CIMS32 DEEP IMPACT SOCKET 17MM 1/2IN DR
6PT
CIMS33 DEEP IMPACT SOCKET 18MM 1/2IN DR
6PT
CIMS34 DEEP IMPACT SOCKET 19MM 1/2IN DR
6PT
CIMS35 DEEP IMPACT SOCKET 21MM 1/2IN DR
6PT
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
[email protected] EA
4.06
A
O.CXZ
www.wallacehardware.com
Hand & Power Tools
Wrenches, 1/2" Socket Wrenches and
Accessories, Spark Plug Sockets
Wrenches, 1/2" Socket Wrenches and
Accessories, Ratchets
GREAT NECK 1/2" DRIVE SPARK PLUG
SOCKET
GREAT NECK 1/2" DRIVE REVERSING
RATCHET
Great Neck 13/16" Spark Plug Socket. 1/2" Drive Neoprene insert. Chrome
vanadium contruction. 6 Points.
Chrome plated high carbon steel. 10" Length. Knurled spinner ring.
ITEM #
162590
DESC
SPS51 SPARK PLUG SOCKET 5/8IN
INFO
SP UOM PRICE
6 POINTS [email protected] EA
3.55
A
L.CXZ
1/2" drive, 5/8"" fastener size. Chrome Vanadium alloy
steel sockets. Surface Drive(R) technology reduces - fastener rounding. 6point. Nickel chrome plated finish. Meets ANSI and ASME specifications. All
sockets on hang tag holder.
391085
DESC
SP UOM PRICE
[email protected] EA
14.20
A
A.OVX
RA12 RATCHET REVSIBABLE HANDLE 10IN
1/2IN
GREAT NECK 1/2" DRIVE FLEX SOCKET
HANDLE
APEX CRESCENT SPARK PLUG SOCKETS
ITEM #
391077
ITEM #
163430
SP UOM PRICE
CSPS3 SPARK PLUG SOCKET 5/8IN 1/2IN DRIVE [email protected] EA 3.24
A
L.VRX
CSPS4 SPARK PLUG SOCKET 13/16IN 1/2IN
[email protected] EA
3.24
DRIVE
A
L.VRX
10" Flex Handle. Heat treated for strength and durability. Chrome plated.
ITEM #
163422
162523
DESC
SP UOM PRICE
[email protected] EA
12.00
A
H.CLX
[email protected] EA
15.06
A
A.YOX
FL12 FLEX HANDLE SOCKET 10IN 1/2IN
DRIVE
BB18 BREAKER BAR 1/2IN DRIVE 18IN
DESC
Wrenches, 1/2" Socket Wrenches and
Accessories, Torque Wrenches
APEX CRESCENT QUICK RELEASE
RATCHET
1/2" Drive quick release ratchet. 72 Tooth for 5? of access. Chrome vanadium
alloy steel for long lasting durability. Nickel chrome plated for long lasting
protection. Head width: 2". Overall length: 12.28". Meets ANSI and ASME
specifications. Guaranteed forever.
ITEM #
391921
GREAT NECK 1/2" DRIVE TORQUE WRENCH
DESC
SP UOM PRICE
[email protected] EA
16.86
A
CL.EYX
CRW12 RATCHET 1/2IN DR 72 TOOTH POLISH
HDL
1/2" Drive Torque Wrench with Adapter. Pivot handle type torque
wrench assures accurate readings. 0-150 ft. lbs, 0-20 M/Kgs. Quick
release head.
ITEM #
162531
DESC
TQ150 TORQUE WRENCH 1/2IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
19.34
CZ.VHX
Wrenches, 1/2" Socket Wrenches and
Accessories, Ratchets
GREAT NECK 1/2" DRIVE QUICK
RELEASE RATCHET
Professional quality. Chrome vanadium steel. Push button quick release. 10
1/2" Length.
ITEM #
169250
DESC
RS012 RATCHET PRO 1/2IN DRIVE
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
24.11
CV.OCX
APEX CRESCENT FLEX
HANDLE/BREAKER BAR
1/2" Drive, Flex Handle, 18" Breaker Bar. Chrome vanadium alloy steel breaker
bar. Offers long lasting durability. Nickel chrome plated for long lasting
durability. Overall length: 19.29"
ITEM #
391980
DESC
CRW16 BREAKER BAR 18IN 1/2IN DRIVE FLEX
HDL
SP UOM PRICE
[email protected] EA
13.48
A
CX.XRX
JMK-IIT BREAKER BAR
Used to break loose stubborn nuts and bolts. 1/2 in. x 18 in.
ITEM #
361941
DESC
54300 BREAKER BAR 18INX1/2IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
16.35
Y.HCX
111
Hand & Power Tools
Wrenches, 1/2" Socket Wrenches and
Accessories, Ratchets
Wrenches, 1/2" Socket Wrenches and
Accessories, Drive Extensions
APEX CRESCENT QUICK RELEASE DUAL
MATERIAL RATCHET
GREAT NECK 1/2" DRIVE EXTENSION
BAR
1/2" Drive quick release, dual material ratchet. 72 Tooth
for 5? of access. Chrome vanadium alloy steel for long lasting durability. Nickel
chrome plated for long lasting protection. Head width: 2". Overall length:
12.78". Meets ANSI and ASME specifications. Guaranteed forever.
Great Neck 1/2" Drive 5" Extension Bar. Heat treated chrome vanadium steel
for strength and durability.
ITEM #
391948
DESC
1/2" Drive, 3" Extension. Chrome vanadium alloy steel
for long lasting durability. Nickel chrome plated for long
lasting protection. Overall length: 5.32". Meets ANSI
and ASME specifications. Guaranteed forever.
DESC
SP
[email protected]
UOM
EA
A
PRICE
3.39
L.EOX
APEX CRESCENT EXTENSION BAR
1/2" Drive, 5" Extension. Chrome vanadium alloy steel
for long lasting durability. Nickel chrome plated for long
lasting protection. Overall length: 7.32". Meets ANSI and ASME specifications.
Guaranteed forever.
ITEM #
391964
DESC
CDTA12 EXTENSION 5IN 1/2IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
4.04
O.XLX
DESC
CIMSA3 EXTENSION SOCKET IMPACT 1/2- DR.
5IN
SP UOM PRICE
[email protected] EA
6.41
A
V.AYX
1/2" Drive, 10" Extension. Chrome vanadium alloy steel
for long lasting durability. Nickel chrome plated for long lasting protection.
Overall length: 12.28". Meets ANSI and ASME specifications. Guaranteed
forever.
112
DESC
CDTA13 EXTENSION 10IN 1/2IN DRIVE
PRICE
4.90
L.AZX
Great Neck 1/2" Drive. 10" Extension Bar. Heat treated chrome vanadium steel
for strength and durability.
DESC
EX105 EXTENSION 10IN 1/2IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
6.85
V.XHX
Wrenches, 1/2" Socket Wrenches and
Accessories, Universal Joints
GREAT NECK 1/2" DRIVE UNIVERSAL
JOINT
Heat treated for strength and durability.
ITEM #
162574
DESC
UJ12 UNIVERSAL JOINT 1/2IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
5.02
L.YAX
APEX CRESCENT UNIVERSAL JOINT
ITEM #
393428
DESC
CDTA18 UNIVERAL JOINT 1/2IN DRIVE
SP
[email protected]
UOM
EA
A
PRICE
5.44
V.XVX
APEX TOOL GROUP LLC
APEX CRESCENT EXTENSION BAR
ITEM #
391972
UOM
EA
A
1/2" Drive universal joint. Maximum operation angle of 45?.
Chrome vanadium alloy steel for long lasting durability. Nickel
chrome plated for long lasting protection. Overall length: 5.04".
Meets ANSI and ASME specifications. Guaranteed forever.
APEX TOOL GROUP LLC
ITEM #
538892
SP
[email protected]
GREAT NECK 1/2" DRIVE EXTENSION
BAR
ITEM #
162566
APEX CRESCENT EXTENSION BAR
CDTA11 EXTENSION 3IN 1/2IN DRIVE
DESC
EX12 EXTENSION BAR 5IN 1/2IN DRIVE
SP UOM PRICE
[email protected] EA
18.49
A
CO.HEX
CRW13 RATCHET 1/2IN DR 72 TOOTH DUAL
MTL HDL
Wrenches, 1/2" Socket Wrenches and
Accessories, Drive Extensions
ITEM #
391956
ITEM #
162558
SP
[email protected]
UOM
EA
A
PRICE
5.40
V.XVX
ITEM #
538906
DESC
SP UOM PRICE
9.27
A
H.XAX
CIMSA4 JOINT UNIVERSAL IMPACT 1/2IN DRIVE [email protected] EA
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Wrenches, 1/2" Socket Wrenches and
Accessories, Drive Adapters
APEX CRESCENT ADAPTER
APEX CRESCENT 3 PC UNIVERSAL JOINT &
ADAPTER SET
3/4"F x 12"M. Chrome vanadium steel for maximum strength.
Nickel chrome plated for long lasting protection.
ITEM #
524212
DESC
CDTA5 ADAPTER 3/4IN F X 12IN M
SP
[email protected]
UOM
EA
A
Wrenches, 1/2" Socket Wrenches and
Accessories, Drive Adapters
1/4" and 3/8" drive universal joints, and 3/8" F 1/4" M adapter.
Meets ANSI and ASME specifications. Guaranteed forever.
PRICE
7.09
E.VLX
ITEM #
394440
DESC
CDTA14 ADAPTER SET UNIVERSAL 3PC
SP
[email protected]
UOM
ST
A
PRICE
8.89
R.HVX
GREAT NECK 1/2" DRIVE ADAPTER
Great Neck 1/2"F x 3/8"M Adapter. 1/2" Drive. Heat
Treated for strength. Plastic hang tab package.
ITEM #
160482
DESC
AD50 ADAPTERS 1/2FEMX3/8MALE
SP
[email protected]
UOM
EA
A
PRICE
3.24
C.YLX
GREAT NECK 1/2" DRIVE ADAPTER
ITEM #
538876
Quality checked. Lifetime warranty. Chrome Vanadium
steel. Hardened. Forged and heat treated to ANSI Spec.
Requirements.
ITEM #
163414
DESC
AD75 ADAPTOR 1/2IN FX3/4INM
SP
[email protected]
UOM
EA
A
CDTA3 ADAPTER 1/2IN F X 3/8IN M
SP UOM PRICE
7.52
A
E.HXZ
APEX TOOL GROUP LLC
1/2" Drive F x 3/8" Drive M adapter. Chrome vanadium alloy
steel for long lasting durability. Nickel chrome plated for long
lasting protection. Overall length: 3.74". Meets ANSI and ASME
specifications. Guaranteed forever.
DESC
DESC
CIMSA1 ADAPTER INCREASE MPACT 1/2- 3/4IN [email protected] EA
PRICE
4.65
L.HRX
APEX CRESCENT ADAPTER
ITEM #
391999
APEX TOOL GROUP LLC
SP
[email protected]
UOM
EA
A
PRICE
2.66
C.YZX
ITEM #
538884
DESC
CIMSA2 ADAPTER REDUCING IMPACT 1/23/8
SP UOM PRICE
[email protected] EA
5.34
A
V.XAX
Wrenches, 1/2" Socket Wrenches and
Accessories, Socket Sets
APEX CRESCENT ADAPTER
GREAT NECK 1/2" & 3/8" DRIVE SOCKET
SET
1/2" Drive F x 3/4" Drive M adapter. Chrome vanadium alloy steel
for long lasting durability. Nickel chrome plated for long lasting
protection. Overall length: 4.21". Meets ANSI and ASME
specifications. Guaranteed forever.
ITEM #
393401
DESC
CDTA4 ADAPTER 1/2IN F X 3/4IN M
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
Contains both 1/2" and 3/8" drive sockets.
PRICE
4.76
O.EAX
ITEM #
268011
DESC
SCS52 SOCKET SET 52PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
ST
A
PRICE
23.58
CO.YLX
113
Hand & Power Tools
Wrenches, 1/2" Socket Wrenches and
Accessories, Socket Sets
Wrenches, 1/2" Socket Wrenches and
Accessories, Socket Sets
APEX CRESCENT 8 PC. IMPACT SOCKET SET
APEX CRESCENT 8 PC SOCKET SET
1/2" drive 6-point impact sockets. Includes SAE sizes: 7/16", 1/2", 9/16",
5/8", 11/16", 3/4", 13/16" and 7/8". Comes in handy storage rack.
1/2" drive, 12-point standard Metric socket set includes: 12, 13, 14, 15, 17,
18, 19, 21mm and storage rack. Meets ANSI and ASME specifications.
Guaranteed forever
ITEM #
394378
ITEM #
394335
DESC
SP UOM PRICE
[email protected] ST
20.12
A
CE.LEX
CIMS0 IMPACT SOCKET SET 6PT 1/2IN DRIVE
SAE 8PC
SP UOM PRICE
13.67
A
CX.ORX
APEX CRESCENT 8 PC SOCKET SET
APEX CRESCENT 8 PC. DEEP IMPACT
SOCKET SET
1/2" drive 6-point impact sockets. Includes SAE sizes:
7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" and 7/8". Comes in handy storage
rack.
ITEM #
394394
DESC
CSAS1 SOCKET SET 12PT 1/2IN DRIVE MM 8PC [email protected] ST
DESC
CIMS2 IMPACT SOCKET SET 6PT 1/2IN DRIVE
SAE 8PC
SP UOM PRICE
[email protected] ST
24.15
A
CA.COX
1/2" drive, 6-point Deep Socket SAE set includes: 1/2",
9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16" and storage
rack. Meets ANSI and ASME specifications. Guaranteed
forever.
ITEM #
394343
DESC
SP UOM PRICE
20.12
A
CE.CZX
CSAS2 SOCKET SET 6PT 1/2IN DRIVE SAE 8PC [email protected] ST
APEX CRESCENT 8 PC IMPACT SOCKET SET
APEX CRESCENT 8 PC DEEP SOCKET
SET
1/2" drive, 6-point Metric socket set includes: 12, 13, 14, 15, 17, 18, 19,
21mm and storage rack. Meets ANSI and ASME specifications.
Guaranteed forever.
1/2" drive, 6-point deep Metric SAE socket set includes:
12, 13, 14, 15, 17, 18, 19, 21mm and storage rack. Meets ANSI and ASME
specifications. Guaranteed forever.
ITEM #
394386
DESC
CIMS1 IMPACT SOCKET SET 6PT 1/2IN DRIVE
MM 8PC
SP UOM PRICE
[email protected] ST
20.12
A
CE.LEX
ITEM #
394351
DESC
CSAS3 SOCKET SET 6PT 1/2IN DRIVE MM
6PC
SP UOM PRICE
[email protected] ST
20.12
A
CE.CZX
APEX CRESCENT 12 PC SOCKET WRENCH SET
APEX CRESCENT 8 PC IMPACT DEEP
SOCKET SET
1/2" drive, 12-point SAE socket wrench set includes: 1/2" drive, 72Tooth quick-release ratchet, 1/2" drive, 3" extension, 1/2" drive, 12-Pt
sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" and storage rack.
Meets ANSI and ASME specifications. Guaranteed forever.
1/2" drive, 6-point Metric socket set includes: 12, 13, 14,
15, 17, 18, 19, 21mm and storage rack. Meets ANSI and
ASME specifications. Guaranteed forever.
ITEM #
394408
DESC
CIMS3 IMPACT SOCKET SET 6PT 1/2IN DRIVE
MM 8PC
SP UOM PRICE
[email protected] ST
24.15
A
CA.COX
1/2" drive, 12-point standard SAE socket set includes: 1/2", 9/16", 5/8",
11/16", 3/4", 13/16", 7/8", 15/16" and storage rack. Meets ANSI and ASME
specifications. Guaranteed forever.
114
DESC
CSWS12 SOCKET WRENCH SET SAE 1/2IN
DRIVE 12PC
SP UOM PRICE
[email protected] ST
31.99
A
LO.YEX
CHANNELLOCK 1/2" DRIVE STANDARD
SOCKET SET
APEX CRESCENT 8 PC SOCKET SET
ITEM #
394327
ITEM #
394238
DESC
CSAS0 SOCKET SET 12PT 1/2IN DRIVE SAE
8PC
SP UOM PRICE
[email protected] ST
13.67
A
CX.ORX
6 pt. Standard sockets: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,
13/16, 7/8, 15/16, 1, 1 1/16, 1 1/8, 1 1/4", 5" (127mm)
extension, 15" (381mm) flex handle, quick release 45 gear teeth ratchet; Dyna
drive torque system offers 20% more torque, eliminates slippage, and
prevents damage to fasteners; Durable steel storage case with molded inlay.
ITEM #
301322
DESC
32161 16PC 1/2" DR SAE SET, SOCKET SET
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
67.93
EC.XHX
www.wallacehardware.com
Hand & Power Tools
Wrenches, 3/4" Socket Wrenches and
Accessories, Standard Sockets
Wrenches, 3/4" Socket Wrenches and
Accessories, Ratchets
APEX CRESCENT 12 PT SOCKET
APEX CRESCENT DRIVE RATCHET
3/4 in. drive. Chrome vanadium steel for maximum strength.
Nickel chrome plated for long lasting protection.
3/4 in. Chrome vanadium steel for maximum strength.
Nickel chrome plated for long lasting protection.
ITEM #
524131
ITEM #
524239
524247
524255
524263
524271
524298
524301
524328
524336
524344
524352
524379
524387
524395
524409
524417
SP UOM PRICE
[email protected] EA
5.40
A
V.CLX
CDS92 3/4IN DRIVE 12PT SOCKET 15/16IN [email protected] EA
5.40
A
V.CLX
CDS93 3/4IN DRIVE 12PT T SOCKET 1IN
[email protected] EA
5.62
A
V.OXZ
CDS94 3/4IN DRIVE 12PT T SOCKET 1-1/16IN [email protected] EA
5.62
A
V.OXZ
CDS95 3/4IN DRIVE 12PT SOCKET 1-1/8IN
[email protected] EA
6.09
A
V.REX
CDS97 3/4IN DRIVE 12PT T SOCKET 1-1/4IN [email protected] EA
6.56
A
V.YHX
CDS98 3/4IN DRIVE 12PT T SOCKET 1-5/16IN [email protected] EA
7.44
A
E.EYX
CDS99 3/4IN DRIVE 12PT T SOCKET 1-3/8IN [email protected] EA
8.81
A
R.HOX
CDS100 3/4IN DRIVE 12PT SOCKET 1-7/16IN [email protected] EA
8.81
A
R.HOX
CDS101 3/4IN DRIVE 12PT T SOCKET 1-1/2IN [email protected] EA
8.96
A
R.AVX
CDS102 3/4IN DRIVE 12PT SOCKET 1-5/8IN [email protected] EA
11.19
A
A.EVX
CDS103 3/4IN DRIVE 12PT SOCKET 1-11/16N [email protected] EA
11.19
A
A.EVX
CDS104 3/4IN DRIVE 12PT SOCKET 1-3/4IN [email protected] EA
11.95
A
Y.COX
CDS105 3/4IN DRIVE 12PT SOCKET 1-13/16IN [email protected] EA
12.70
A
Y.RYX
CDS106 3/4IN DRIVE 12PT SOCKET 1-7/8IN [email protected] EA
13.44
A
CX.LRX
CDS107 3/4IN DR. 12PT SOCKET 2IN
[email protected] EA
14.19
A
CX.AVX
DESC
SP
[email protected]
CRW19 3/4IN DRIVE RATCHET HANDLE
DESC
CDS91 3/4IN DRIVE 12PT SOCKET 7/8IN
Wrenches, 3/4" Socket Wrenches and
Accessories, Ratchets
APEX CRESCENT FLEX HANDLE
DESC
CRW23 3/4IN DRIVE FLEX X HANDLE 19IN
524190
CRW24 3/4IN DRIVE SLIDING T BAR 18IN
www.wallacehardware.com
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
47.61
OR.OEX
Wrenches, 3/4" Socket Wrenches and
Accessories, Drive Extensions
APEX CRESCENT EXTENSION BAR
3/4 in. drive. Chrome vanadium steel for maximum
strength. Nickel chrome plated for long lasting protection.
ITEM #
524158
CRW20 3/4IN DRIVE EXTENSION BAR 4IN
DESC
524166
CRW21 3/4IN DRIVE EXTENSION BAR 8IN
524174
CRW22 3/4IN DRIVE EXTENSION BAR 16IN
SP UOM
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
PRICE
11.54
A.ALX
14.93
CZ.VXZ
20.39
CE.ERX
Wrenches, 3/4" Socket Wrenches and
Accessories, Socket Sets
APEX CRESCENT 20 PC SAE/MM SOCKET SET
Provides the innovation of the X6 design in the box end allowing
you to 6 different types of fasteners, the convenience of every
pass-thru socket replacing one deep and standard socket and
clearance of the low-profile ratchet and socket combined. This set
includes the following sizes: 10, 11, 12, 13, 14, 15, 17, 18 and 19mm
& 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8 inch.
ITEM #
377201
DESC
CX6PT20 RATCHET & SOCKET CRESCENT X6
PASS THRU
SP UOM PRICE
[email protected] EA
40.42
A
OX.RYX
Wrenches, Hex Keys and Sets, Hex Keys
EKLIND HEX KEYS
3/4 in. drive. Chrome vanadium steel for maximum
strength. Nickel chrome plated for long lasting protection.
ITEM #
524182
UOM
EA
A
PRICE
35.47
LH.XAX
25.16
CY.LXZ
The keys are manufactured from quality 8650 alloy
steel Identification size and USA stamped on each key.
Black Oxide Finish.
ITEM #
387649
15132 SHORT HEX L KEY 1/2IN
DESC
SP
[email protected]
198064
15610 LONG HEX L KEY 5MM
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
PRICE
4.49
L.AEX
0.91
X.EHX
115
Hand & Power Tools
Wrenches, Hex Keys and Sets, Hex Key Sets
Wrenches, Hex Keys and Sets, Hex Key Sets
EKLIND 9 PC. LONG ARM METRIC HEX-L KEY SETS
EKLIND 13 PC. BALL LONG ARM HEX L KEY SETS
In plastic holder. Metric Long sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm.
In plastic holder. Turns 360 degrees at up to 25 degree angle. Inch
sizes: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16",
7/32", 1/4", 5/16", 3/8".
ITEM #
576417
DESC
SP
[email protected]
10609 LONG HEX KEY SET 9PC
UOM
EA
A
PRICE
14.69
Y.CVX
ITEM #
305065
DESC
13213 BALL HEX L KEY SET 13PC
SP
[email protected]
UOM
CD
A
PRICE
28.04
CH.AXZ
EKLIND 9 PC. SHORT ARM METRIC HEX-L KEY
SETS
EKLIND 7 PC. BALL LONG ARM HEX L KEY SETS
In plastic holder. Metric sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm.
In plastic holder. Turns 360 degrees at up to 25 degree angle. Inch
sizes: 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4".
ITEM #
576395
DESC
SP
[email protected]
10509 SHORT HEX KEY SET 9PC
UOM
EA
A
PRICE
11.73
H.CRX
EKLIND INCH SIZE 18 PC. COMBINATION HEX-L
KEY SETS
DESC
SP UOM
[email protected] EA
A
10018 COMBINATION HEX KEY SET 18PC
DESC
13207 BALL HEX L KEY SET 7PC
SP
[email protected]
PRICE
9.65
R.XOX
Includes sizes:5/64, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4 inches. Plastic
holder with size markings organizes keys. Black oxide finish. Meets
ANSI and Federal Specifications.
10207 LONG HEX KEY SET 7PC
DESC
SP
[email protected]
397385
10213 LONG HEX KEY SET 13PC
[email protected]
UOM
EA
A
ST
A
PRICE
13.97
A.VXZ
In plastic holder. Turns 360 degrees at up to 25 degree angle. Metric
sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10.
ITEM #
305111
DESC
13609 BALL HEX L KEY SET 9PC
SP
[email protected]
EKLIND 7 PIECE LONG HEX KEY SET
ITEM #
576387
UOM
CD
A
EKLIND 9 PC. BALL LONG ARM HEX L METRIC KEY
SETS
18 piece combination set. Short Arm Sizes: .050, 1/16", 5/64", 3/32",
7/64", 1/8", 5/32", 3/16", 7/32". Long Arm Sizes: 1/16", 5/64", 3/32",
1/8", 9/64", 5/32", 3/16", 1/4", 5/16".
ITEM #
397172
ITEM #
305103
PRICE
6.59
V.XOX
15.33
Y.ORX
UOM
CD
A
PRICE
23.31
CV.ELX
EKLIND 5-IN-1 LARGE FOLD-UP HEX KEY
SETS
Hex sizes: 3/16" - 3/8"; 3-3/8" - 5" key length
ITEM #
378739
DESC
SP UOM PRICE
12.63
A
H.ERX
20511 5-N-1 HEX KEY SET 3/16-,3/8,3-3/8, 5IN [email protected] EA
EKLIND 7 PIECE SHORT HEX KEY SET
Includes: 5/64, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4 inch keys.
Plastic holder with marked size holes.
EKLIND 8-IN-1 SMALL FOLD-UP HEX KEY
SETS
Hex sizes:.050" - 5/32"; 1-3/4" - 2-3/4" key length
ITEM #
397180
576379
116
DESC
INFO
10107 SHORT HEX KEY SET
SIZES: 5/64"
7PC
10111 SHORT HEX KEY SET 11PC SIZES: 0.50"
SP UOM PRICE
[email protected] EA
4.06
A
L.VOX
[email protected] EA
6.69
A
V.XAX
ITEM #
378704
DESC
20811 8-N-1 FOLD UP HEX KEY KEY SET .0505/32IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
5.80
A
O.VHX
www.wallacehardware.com
Hand & Power Tools
Wrenches, Hex Keys and Sets, Hex Key Sets
EKLIND 8-IN-1 EXTRA LONG FOLD-UP
HEX KEY SETS
EKLIND 7-IN-1 TORX KEY SETS
Medium fold-up. Includes: T-10, T-15, T-20, T-25, T-27,
T-30, and T-40.
8 key. Key lengths: 3-1/2"-5". Hex widths: 3/32"-1/4".
ITEM #
340103
DESC
20812 HEX KEY 3/32-1/4IN
Wrenches, Hex Keys and Sets, Hex Key Sets
SP
[email protected]
UOM
EA
A
PRICE
11.73
H.CRX
ITEM #
340111
DESC
22571 7-N-1 TORX KEY SET 1
SP
[email protected]
EKLIND 9-IN-1 SMALL FOLD-UP HEX KEY
SETS
GREAT NECK 8-IN-1 FOLDING HEX KEY
SET
9 keys. Small. Key lengths: 1-3/4"-2-7/8". Hex widths:
.050-3/16"
8 Piece Folding Hex Key Set- Star Sizes: T9, T10,T15,
T20, T25, T27, T30, T40. Chrome Vanadium Steel.
ITEM #
340081
DESC
SP
[email protected]
20912 9-N-1 HEX KEY SET .050-3/16IN
UOM
EA
A
PRICE
7.07
V.LOX
ITEM #
329363
DESC
58783 FOLDING HEX KEY SET 8PC TORX
EKLIND 9-IN-1 MEDIUM FOLD-UP HEX
KEY SETS
GREAT NECK 9-IN-1 FOLDING HEX KEY
SET
Hex sizes: 5/64" - 1/4"; 2" - 3-7/8" key length
SAE Sizes: 5/64'', 3/32'', 7/64'', 1/8'', 9/64'', 5/32'',
3/16'', 7/32'', 1/4''. Chrome Vanadium Steel.
ITEM #
378720
DESC
SP UOM PRICE
8.96
A
E.ORX
20911 9-N-1 HEX KEY SET 5/64-1/4-2IN-3-7/8IN [email protected] EA
ITEM #
329371
DESC
58782 FOLDING HEX KEY SET SAE 9PC
EKLIND 7-IN-1 SMALL METRIC FOLD-UP
HEX KEY SETS
GREAT NECK 8-IN-1 FOLDING HEX KEY
SET
Hex sizes: 1.5mm - 6mm; 3 1-3/4" - 3-1/4" key length.
8 Piece Folding Hex Key Set- Metric Sizes: 1.5, 2, 2.5,
3, 4, 5, 6, 8mm. Chrome Vanadium Steel.
ITEM #
378712
DESC
21171 M17 HEX KEY SET 1.5-6MM
SP
[email protected]
UOM
EA
A
PRICE
7.31
V.OAX
DESC
www.wallacehardware.com
SP
[email protected]
SP UOM
[email protected] EA
A
PRICE
8.57
E.XYX
SP
[email protected]
PRICE
7.96
V.RHX
UOM
EA
A
SP UOM
[email protected] EA
A
PRICE
7.96
V.ROX
SAE Sizes: 1/16'', 5/64'', 3/32'', 1/8'', 5/32'', 3/16'', 1/4'', 5/16'', 3/8''.
Chrome Vanadium Steel.
Metric hex key sizes: 3-10mm.
21151 M15 HEX KEY SET 3-10MM
DESC
58781 FOLDING HEX KEY SET METRIC 8PC
PRICE
17.41
CX.ROX
GREAT NECK L-TYPE 9-PIECE S.A.E. HEX KEY SET
EKLIND 6-IN-1 LARGE METRIC FOLD-UP
HEX SETS
ITEM #
340138
ITEM #
329398
UOM
EA
A
UOM
EA
A
PRICE
13.42
A.LXZ
ITEM #
329428
DESC
58785 L-TYPE HEX KEY SET SAE 9PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
9.67
E.RAX
117
Hand & Power Tools
Wrenches, Hex Keys and Sets, Hex Key Sets
Wrenches, Hex Keys and Sets, Hex Key Sets
GREAT NECK L-TYPE 9-PIECE METRIC HEX KEY
SET
KLEIN TOOLS 9-IN-1 FOLDING HEX KEY
SETS
Metric Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm. Chrome Vanadium
Steel.
Tough, heat-treated chrome-nickel alloy steel. Hex-key
ends are square-cut for a secure full-depth fit and
maximum contact with the hex socket. Helps prevent
slippage and stripping of the socket. Holder serves as a handle. Folding hex
keys can be used straight-out or at a right angle for extra leverage. Nine-Key
Set: sizes 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" and 1/4". Handle
length 4-1/4", Key lengths 1-3/4" to 3-1/2".
ITEM #
329401
DESC
SP
[email protected]
58784 L-TYPE HEX KEY SET METRIC 9PC
UOM
EA
A
PRICE
9.67
E.RAX
ITEM #
340669
DESC
70591 FOLDING HEX KEY SET ( 9 KEY INCH
SET)
SP UOM PRICE
[email protected] EA
13.04
A
A.RYX
GREAT NECK L-TYPE STAR DRIVE HEX KEY SET
9-piece. Includes Sizes: T10, T15, T20, T25, T27, T30, T40, T45 and
T50. Chrome Vanadium Steel.
ITEM #
329436
DESC
SP
[email protected]
58786 L-TYPE HEX KEY SET TORX 9PC
UOM
EA
A
JMKIIT 25 PIECE BALL HEX KEY
WRENCH SET
PRICE
13.59
A.XRX
Industrial strength. Ball head design allows for turning
of hard to reach fasteners from up to a 30 degree
angle. SAE hex sizes: 1/20, 1/16, 5/64, 3/32, 7/64, 1/8,
9/64, 5/32, 3/16, 7/32, 1/4 and 3/8 inches. Metric sizes:
1.3, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, and 10mms. Soft grip organizer.
ITEM #
378917
DESC
85600 BALL HEX KEY WRENCH SET 25PC
KLEIN TOOLS 5-IN-1 FOLDING HEX KEY
SETS
Tough, heat-treated chrome-nickel alloy steel. Hex-key
ends are square-cut. Helps prevent slippage and
stripping of the socket. Holder serves as a handle.
Folding hex keys can be used straight-out or at a right angle for extra
leverage. Five-Key Set sizes: 3/16", 7.32", 1/4", 5/16" and 3/8". Handle length is
5-1/4", Key lengths 3" to 4-5/8".
ITEM #
340685
DESC
70579 FOLDING HEX KEY SET ( 5 KEY INCH
SET)
SP UOM PRICE
[email protected] EA
15.87
A
CX.EAX
Wrenches meet or exceed ANSI/ASME B18.3
specifications. Chamfered hex key edges to give better
fit and reduce stripped fasteners. Black oxide finish
resists rust. Durable caddy keeps keys organized and
has marked slots for each key. Backed by a limited
lifetime warranty. Includes: -22 piece hex key set includes 3/8'', 5/16'', 1/4'',
7/32'', 3/16'', 5/32'', 9/64'', 1/8'', 7/64'', 3/32'', 5/64'', 1/16'', 0.05'', 1.5mm, 2mm,
2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm.
KLEIN TOOLS 8-IN-1 FOLDING HEX KEY
SETS
ITEM #
340677
118
DESC
SP UOM PRICE
8.56
A
E.HCX
70581 FOLDING HEX KEY SET( 8 KEY INCH SET) [email protected] EA
PRICE
12.55
H.OCX
STANLEY LONG ARM HEX KEY SET
ITEM #
445851
Tough, heat-treated chrome-nickel alloy steel. Hex-key
ends are square-cut for a secure full-depth fit and
maximum contact with the hex socket. Helps prevent
slippage and stripping of the socket. Holder serves as a handle. Folding hex
keys can be used straight-out or at a right angle for extra leverage. Eight-Key
Set: sizes .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64" and 5/32". Handle
length is 3-1/16", Key lengths 1-1/2" to 2-3/8".
SP UOM
[email protected] ST
A
DESC
SP UOM PRICE
13.89
CX.RZX
85-753 HEX KEY SET LONG ARM SAE/METRIC [email protected] ST
22PC
A
GREAT NECK 9PC METRIC HEX KEY SET
Metric Short Arm Hex Key Set with Holder. Hardened and
Tempered for Strength. Chrome Molybdemum Steel. Sizes: 1.5,
2, 2.5, 3, 4, 5, 6, 8, 10mm.
ITEM #
830860
DESC
SP UOM PRICE
6.73
A
O.YLX
HK9MS HEX KEY SET SHORT ARM METRIC 9PC [email protected] ST
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Wrenches, Hex Keys and Sets, Hex Key Sets
Wrenches, Hex Keys and Sets, Hex T-Keys
GREAT NECK 9 PIECE FOLDING HEX KEY
SET
EKLIND 5 PC. METRIC HEX T-KEY
SERVICE KITS
Includes sizes 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",
7/32", 1/4". Hardened & tempered chrome vanadium
steel. Black oxide plated handle. Folds for easy
transportation.
5 Piece. Set includes: 2.5mm, 3mm, 4mm, 5mm and 6mm.
ITEM #
830453
ITEM #
340189
DESC
SP
[email protected]
HEK9C FOLDING HEX KEY SET 9PC
UOM
ST
A
PRICE
5.63
O.LHX
DESC
PRICE
20.73
CO.CEX
Wrenches, Pipe Wrenches, Pipe Wrenches
Chrome vanadium. Fits 6 type of bolts and nuts : 4
point square, 6 point square, 12 point hex. External
star. Spline. Partially rounded 6 point hex. 1/4,1/2,7/16,
5/8,3/8,9/16,5/16,11/16,8,10,11,13,14,16,17.
Comes in both metric and SAE sizes for a wide range of
applications. It is constructed from hardened tempered
chrome molybdenum steel. The hex keys come in two
convenient holders that are wall mountable. Metric hex keys
range from 1 MM to 10 MM, SAE range from 1/16 in. to 3/8 in.
68216 25PC HEX KEY SET
SP UOM
[email protected] EA
A
JMKIIT SPLINE DISC WRENCH
GREAT NECK 25 PC. HEX KEY SET
ITEM #
512547
DESC
35195 METRIC T-HDL HEX KEY KIT 9IN
SP
[email protected]
ITEM #
372870
UOM
EA
A
PRICE
21.39
CL.HAX
304735
DESC
84900 SPLINE DISC
WRENCH SAE & MM
31005 HD PIPE WRENCH
8IN
INFO
SP UOM PRICE
[email protected] EA
13.84
A
A.LZX
1" PIPE CAPACITY" [email protected] EA
28.80
A
CA.VRX
Wrenches, Hex Keys and Sets, Hex T-Keys
JMK/IIT 8 PIECE T-HANDLE HEX KEY SET
Carbon steel, heat treated. SAE sizes: 3/32", 7/64",
1/8", 9/64", 5/32", 3/16", 7/32" and 1/4". 6" arm with
vinyl coated comfort grip. Lifetime warranty.
ITEM #
128074
DESC
SP
[email protected]
85300 T HDLE HEX KEY 8PC W/PCH
UOM
ST
A
PRICE
9.90
E.AEX
APEX CRESCENT SELF-ADJUSTING PIPE
WRENCH
EKLIND 8 PC. HEX T-KEY
12 inch. Self-adjusting, head design instantly grips and
releases pipes, and other types of fasteners providing fast, ratcheting action.
5/8? ? 1 ?? jaw capacity. Ideal for most surfaces including black, galvanized,
PVC and copper pipe, as well as nuts, bolts and couplings. Unique angled
tooth configuration for ratcheting applications and better gripping.
Cushion Grip. Set includes: 3/32", 7/64", 1/8", 9/64",
5/32", 3/16", 7/32" and 1/4".
ITEM #
381519
ITEM #
375640
53168 T-HDL HEX KEY KIT -CG 6IN
DESC
SP
[email protected]
375705
53198 T-HDL HEX KEY KIT -CG 9IN
[email protected]
UOM
EA
A
EA
A
PRICE
33.15
LC.XVX
36.47
LO.CEX
EKLIND 8 PC. HEX T-KEY SERVICE KIT
DESC
304743
CPW12 QUICK ADJUSTABLE PIPE
WRENCH 12IN
31010 HD PIPE WRENCH 10IN
304751
31015 HD PIPE WRENCH 12IN
304778
31020 HD PIPE WRENCH 14IN
304786
31025 HD PIPE WRENCH 18IN
304794
31030 HD PIPE WRENCH 24IN
8 piece. Sets include: 3/32",7/64", 1/8", 9/64", 5/32",
3/16", 7/32" and 1/4".
ITEM #
340154
DESC
33168 T-HDL HEX KEY KIT 6IN
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
INFO
1-1/2" PIPE
CAPACITY"
2" PIPE
CAPACITY"
2" PIPE
CAPACITY"
2-1/2" PIPE
CAPACITY"
3" PIPE
CAPACITY"
SP UOM PRICE
[email protected] EA
23.44
A
CH.AYX
[email protected] EA
37.80
A
LV.XZZ
[email protected] EA
43.55
A
LH.RYX
[email protected] EA
48.82
A
OC.XZZ
[email protected] EA
70.55
A
VZ.AHX
[email protected] EA
111.68
A
HX.YCX
PRICE
24.10
CE.OXZ
1-800-776-0976 NOVEMBER
2016
119
Hand & Power Tools
Wrenches, Pipe Wrenches, Pipe Wrenches
Wrenches, Pipe Wrenches, Pipe Wrenches
IRWIN VISE-GRIP ALUMINUM QUICK
ADJUST PIPE WRENCH
IRWIN VISE-GRIP CAST ALUMINUM PIPE
WRENCH
The IRWIN Vise-Grip Quick-Adjusting Pipe Wrench was
designed by the professional seeking to enhance the speed and convenience
of pipe wrench use, while ensuring durability and comfort. One-handed tool
adjustment. Innovative pipe wrench designed to quickly adjust to work
surfaces and fit in confined spaces. The industrial grade 11-Inch tool has a pipe
range of a traditional 14-Inch tool with 40-Percent less weight. Quickadjusting, moveable jaw with 2-1/4-Inch jaw capacity.
14 inch. Heavy-duty cast aluminum housing is 40% lighter than cast iron. The Ibeam handle's wide design provides better weight distribution. Drop-forged
jaw is heat-treated to resist distortion or breakage. Hardened teeth provide
tremendous bite. Easy-spin adjusting nut is heat-treated for durability.
Hammer head provides flat surface for hammering.
ITEM #
530506
277819
201103
385794
385808
385816
DESC
INFO
274001SM PIPE WRENCH 11IN
QUICK ADJUST
31090 ALM PIPE WRENCH 810
10IN
47057 ALM PIPE WRENCH 812
12IN
31095 ALM PIPE WRENCH 814
14IN
31100 ALM PIPE WRENCH 818
18IN
31105 ALM PIPE WRENCH 824
24IN
1-1/2" PIPE
CAPACITY"
2" PIPE
CAPACITY"
2" PIPE
CAPACITY"
2-1/2" PIPE
CAPACITY"
3" PIPE
CAPACITY"
SP UOM PRICE
[email protected] EA
32.66
A
LZ.OLX
[email protected] EA
59.13
A
OH.RHX
[email protected] EA
71.35
A
VE.EXZ
[email protected] EA
79.69
A
EX.RXZ
[email protected] EA
99.30
A
RO.XEX
[email protected] EA
158.29
A
CXZ.EXZ
ITEM #
530522
DESC
SP UOM PRICE
58.48
A
OY.YHX
2074114 PIPE WRENCH 14IN CAST ALUMINUM [email protected] EA
JMK/IIT STEEL PIPE WRENCHES
Heavy duty. Drop forged steel. Hardened and tempered. Accurately machined
jaws and adjustment nut. Heavy duty enamel finish. Malleable handles.
ITEM #
543268
86200 HD PIPE WRENCH 14IN
DESC
SP
[email protected]
150126
86250 WRENCH PIPE HD 18IN
[email protected]
OLYMPIA ALUMINUM PIPE WRENCH
UOM
EA
A
EA
A
PRICE
12.30
H.LVX
22.06
CL.YAX
Cast aluminum alloy handles. Heavy duty enamel finish.
Accurately machined, drop forged, steel jaw and
adjustment nut.
ITEM #
310417
01-614 PIPE WRENCH 14IN ALUMINUM
DESC
310425
01-636 PIPE WRENCH 36IN ALUMINUM
SP UOM
[email protected] EA
A
[email protected] EA
A
PRICE
17.95
CX.HXZ
90.49
EV.XRX
IRWIN VISE-GRIP CAST IRON PIPE
WRENCH
OLYMPIA TOOLS ALUMINUM PIPE
WRENCHES
Body is aluminum. Jaws are drop forged. Lighter
weight than the regular pipe wrenches.
ITEM #
329819
01-618 PIPE WRENCH 18IN ALUMINUM
DESC
329851
01-624 PIPE WRENCH 24IN ALUMINUM
SP
[email protected]
UOM
EA
A
[email protected] EA
A
PRICE
29.49
CH.VZX
44.95
LR.YEX
14 inch. Constructed from the highest grade cast iron, forged and heat treated
to ensure maximum durability. Unique hammer head design provides a flat
surface for hammering. Easy-spin adjusting nut is heat-treated for durability.
Wide I-beam handle design provides better weight distribution. Drop-forged
jaw is heat-treated to resist distortion or breakage.
GREAT NECK STEEL PIPE WRENCH
ITEM #
530514
8". Heavy duty professional quality. Precision milled moveable jaws. Quality
steel construction. Perfectly balanced.
DESC
SP
[email protected]
274102 PIPE WRENCH 14IN CAST IRON
UOM
EA
A
PRICE
32.53
LZ.LVX
ITEM #
106054
PW8 PIPE WRENCH 8IN
SP
[email protected]
JMK/IIT STEEL PIPE WRENCHES
106070
PW10 PIPE WRENCH 10IN
[email protected]
Heavy duty. Drop forged steel. Hardened and tempered. Accurately machined
jaws and adjustment nut. Heavy duty enamel finish. Malleable handles.
106089
PW14 PIPE WRENCH 14IN
[email protected]
106097
PW18 PIPE WRENCH 18IN
[email protected]
106100
PW24 PIPE WRENCH 24IN
[email protected]
ITEM #
150096
120
DESC
86150 WRENCH PIPE HD 10IN
SP
[email protected]
UOM
EA
A
PRICE
9.84
E.HYX
DESC
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
6.59
O.AZX
7.81
V.EXZ
13.34
H.RAX
16.40
Y.VEX
26.59
CE.VRX
www.wallacehardware.com
Hand & Power Tools
Wrenches, Pipe Wrenches, Pipe Wrenches
COBRA ADJUSTABLE WRENCH
10 in. cast iron wrench.
ITEM #
856355
DESC
SP
[email protected]
PST185 CAST IRON WRENCH 10IN
UOM
EA
A
PRICE
10.41
R.LVX
Screwdrivers and Nutdrivers, Screwdrivers,
Stubby Slotted Tip
GREAT NECK 1/4"X1-1/2"SLOTTED
SCREWDRIVER
Square Shank Slotted Screwdriver is manufactured with chrome vanadium
steel for strength and durability. It features a square shank that provides
additional turning capabilities with a precision ground sandblasted tip for a
more secure fit. A full size highest quality acetate handle ensures comfort and
extra gripping power. The screwdriver is color coded for easy tip identification.
ITEM #
106119
COBRA ADJUSTABLE WRENCH
DESC
SP UOM PRICE
[email protected] EA
3.79
A
L.LRX
A22SC SCREWDRIVER SQUARE 1-1/2X1/4IN
CHROME
14" aluminum pipe wrench.
ITEM #
856541
DESC
SP UOM
[email protected] EA
A
PST390 PIPE WRENCH 14IN ALUMINUM
PRICE
25.11
CE.XVX
Screwdrivers and Nutdrivers, Screwdrivers,
Stubby Slotted Tip
Ergonomically designed tri-lobular handle design provides maximum tip
torque. Slip-resistant rubber grip, high strength nylon handle core overmolded onto bar for more torque handling and impact resistance. Precision
machined and sand blasted tip grips fastener securely and resists slip out.
Lacquer coated bar resists rust. Heat-treated tip for durability. Tip
identification symbol molded onto side of handle. 4" overall length, 1.6" blade
DESC
62-552 SCREWDRIVER 1/4IN STANDARD
FATMAX
Dual material handle designed for improved comfort
and performance. Chrome plated blade provides corrosion resistance and
easy cleaning. Black oxide tip provides a strong and durable construction with
blasted tip to reduce slippage. Includes a hang hole for easy storage and can
be used with an additional driver to create a T-Handle. The sizes of the driver
are laser etched on the blade for quick and easy reference.
ITEM #
451401
STANLEY FATMAX STUBBY FLATHEAD
SCREWDRIVER
ITEM #
125334
APEX CRESCENT SLOTTED
SCREWDRIVER
SP UOM PRICE
[email protected] EA
2.85
A
L.COX
DESC
SP UOM PRICE
2.66
A
L.XLX
CSD41V SLOTTED SCREWDRIVER 1/4X1-1/4IN [email protected] CD
Screwdrivers and Nutdrivers, Screwdrivers,
Stubby Phillips Tip
GREAT NECK "AA SERIES" PHILLIPS
HEAD SCREWDRIVERS
High carbon steel blades. Nickel plated. Color coded (Phillips has red flutes).
Packaged with plastic hang tabs.
ITEM #
106453
DESC
RA22C SCREWDRIVER #2 1-1/2X1/4IN
GREAT NECK PROFESSIONAL ROUND
SHANK SCREWDRIVERS
Large tough super shock and wear resistant hi-impact
clear amber handles with black fluted embossed inlay.
Polished blades manufactured of chrome vanadium steel with precision
ground tips. Round shank. Slotted screwdriver. 1-1/2"x1/4". Carded.
High carbon steel blade, nickel plated; Top quality
extruded shock resistant handle; Precision ground tip.
ITEM #
829838
ITEM #
829846
DESC
SP
UOM PRICE
3.43
A
L.XOX
G22C SLOTTED SCREWDRIVER 1-1/2INX1/4IN [email protected] CD
UOM
EA
A
PRICE
2.28
C.OEX
GREAT NECK PHILLIPS SCREWDRIVER
237108
www.wallacehardware.com
SP
[email protected]
DESC
GR22C #2 PHILLIPS SCREWDRIVER 11/2X1/4IN
58725 STUBBY SLOTTED SCREWDRIVER
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] CD 3.30
A
C.YRX
[email protected] EA
2.91
A
C.HOX
121
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Stubby Phillips Tip
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Slotted Tip
APEX CRESCENT PHILLIPS HEAD
SCREWDRIVER
APEX CRESCENT SLOTTED
SCREWDRIVER
Dual material handle designed for improved comfort
and performance. Chrome plated blade provides corrosion resistance and
easy cleaning. Black oxide tip provides a strong and durable construction with
blasted tip to reduce slippage. Includes a hang hole for easy storage and can
be used with an additional driver to create a T-Handle. The sizes of the driver
are laser etched on the blade for quick and easy reference.
Dual material handle designed for improved comfort
and performance. Chrome plated blade provides corrosion resistance and
easy cleaning. Black oxide tip provides a strong and durable construction with
blasted tip to reduce slippage. Includes a hang hole for easy storage and can
be used with an additional driver to create a T-Handle. The sizes of the driver
are laser etched on the blade for quick and easy reference.
ITEM #
451681
ITEM #
451428
DESC
SP UOM PRICE
3.04
A
L.LAX
CSDP41V PHILLIPS SCREWDRIVER #2X1-1/4IN [email protected] CD
DESC
SP
UOM PRICE
3.41
A
L.EVX
CSD44V SLOTTED SCREWDRIVER 1/4INX4IN [email protected] CD
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Slotted Tip
APEX CRESCENT SLOTTED
SCREWDRIVER
Dual material handle designed for improved comfort and performance.
Chrome plated blade provides corrosion resistance and easy cleaning. Black
oxide tip provides a strong and durable construction with blasted tip to reduce
slippage. Includes a hang hole for easy storage and can be used with an
additional driver to create a T-Handle. The sizes of the driver are laser etched
on the blade for quick and easy reference.
ITEM #
451363
DESC
SP UOM PRICE
3.04
A
L.LAX
CSD33V SLOTTED SCREWDRIVER 3/16INX3IN [email protected] CD
APEX CRESCENT SLOTTED
SCREWDRIVER
Dual material handle designed for improved comfort
and performance. Chrome plated blade provides corrosion resistance and
easy cleaning. Black oxide tip provides a strong and durable construction with
blasted tip to reduce slippage. Includes a hang hole for easy storage and can
be used with an additional driver to create a T-Handle. The sizes of the driver
are laser etched on the blade for quick and easy reference.
ITEM #
451436
APEX CRESCENT SLOTTED
SCREWDRIVER
163872
DESC
CSD46V SLOTTED SCREWDRIVER 1/4INX6IN
60-004 SCREWDRIVER 1/4IN STANDARD BLD
7-5/8IN
SP UOM PRICE
[email protected] CD 4.01
A
O.XCX
[email protected] EA
1.83
A
C.VXZ
Dual material handle designed for improved comfort
and performance. Chrome plated blade provides corrosion resistance and
easy cleaning. Black oxide tip provides a strong and durable construction with
blasted tip to reduce slippage. Includes a hang hole for easy storage and can
be used with an additional driver to create a T-Handle. The sizes of the driver
are laser etched on the blade for quick and easy reference.
ITEM #
451398
DESC
SP UOM PRICE
[email protected] CD
3.28
A
L.VHX
CSD36V SLOTTED SCREWDRIVER
3/16INX6IN
STANLEY FLAT HEAD SCREWDRIVERS
Standard Blade. Full size vinyl grip. Alloy steel blade. Tips fully cross ground
for more secure fit. Chrome plated for corrosion resistance. 13-3/8" long. 8"
blade length. 3/8" blade diameter.
ITEM #
486922
122
DESC
66-092 STD SCREWDRIVER VINYL GRIP STD
BLADE 8IN
SP UOM PRICE
[email protected] EA
9.56
A
H.LYX
APEX CRESCENT SLOTTED
SCREWDRIVER
Dual material handle designed for improved comfort
and performance. Chrome plated blade provides corrosion resistance and
easy cleaning. Black oxide tip provides a strong and durable construction with
blasted tip to reduce slippage. Includes a hang hole for easy storage and can
be used with an additional driver to create a T-Handle. The sizes of the driver
are laser etched on the blade for quick and easy reference.
ITEM #
451444
DESC
CSD56V SLOTTED SCREWDRIVER
5/16INX6IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] CD
5.12
A
O.AZX
www.wallacehardware.com
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Slotted Tip
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Slotted Tip
STANLEY FATMAX STANDARD
SCREWDRIVERS
STANLEY STANDARD FLUTED LIGHT
BLADE CABINET TIP SCREWDRIVERS
Ergonomically designed tri-lobular handle design provides maximum tip
torque. Slip-resistant rubber grip, high strength nylon handle core overmolded onto bar for more torque handling and impact resistance. Precision
machined and sand blasted tip grips fastener securely and resists slip out.
Lacquer coated bar resists rust. Heat-treated tip for durability. Tip
identification symbol molded onto side of handle.
Ergonomic handle for comfortable grip. Alloy steel nickel protected baldes for
long life. Hardened tips for non-slip fit. 3/16" Blade Dia., 3/16" Tip Width.
ITEM #
125296
DESC
ITEM #
163864
DESC
SP UOM PRICE
1.90
A
C.VEX
60-003 SCREWDRIVER 3/16 CABINET TIP 6-5/8 [email protected] EA
SP UOM PRICE
[email protected] EA
4.37
A
O.OXZ
62-553 SCREWDRIVER 1/4X4 STANDARD
FATMAX
KLEIN TOOLS CABINET TIP
SCREWDRIVERS
GREAT NECK PROFESSIONAL SQUARE
SHANK SCREWDRIVER
Large tough super shock and wear resistant hi-impact clear amber handles
with black fluted inlay. Polished blades manufactured of chrome vanadium
steel with precision ground tips. Square shank. Slotted screwdriver. 1/4"x4".
Carded.
Cushion-Grip handle resists slippage. Grip resists oil, gas and water.
Exceptionally strong, made of carefully heat-treated and tempered steel.
Bolster on blade at handle provides added strength and rigidity. Deep-ribbed
design. Internal flanges inside handle provide solid, twist-resistant blade
anchor. Meets or exceeds ASME/ANSI specs. Perfect for electrical and
telephone work. Narrow tip permits blade access where space is limited.
ITEM #
830402
ITEM #
342882
125237
DESC
SP UOM PRICE
4.65
A
L.HRX
[email protected] EA
4.24
A
O.LZX
G44SC SQUARE SHANK SCREWDRIVER 4X1/4IN [email protected] CD
62-555 SCREWDRIVER 5/16X6 STANDARD
FATMAX
STANLEY FLAT HEAD SCREWDRIVERS
Square Blade. Standard Tip. Full-size rubber grip. Boron steel blade. Bolstered
blade for maximum strength. Tips fully cross ground for more secure fit.
Chrome-plated for corrosion resistance. Carded.
ITEM #
486884
DESC
66-093 STD SCREWDRIVER VINYL GRIP SQ
BLD 4IN
SP UOM PRICE
[email protected] EA
7.64
A
E.HLX
DESC
601-6 SCREWDRIVER 3/16INX6IN
SP
[email protected]
UOM
EA
A
PRICE
12.61
A.VCX
APEX CRESCENT MECHANIC'S
SCREWDRIVER
Round shaft. Wide tip easily turns damaged heads. Tapered, torque-enhancing
cushion grip handle. Interlocks with durable core, provides a powerful and
comfortable grip.
ITEM #
574473
DESC
2143-6 SCREWDRIVER MECHANICS 6IN
SP
[email protected]
UOM
EA
A
PRICE
7.41
E.RCX
KLEIN TOOLS KEYSTONE TIP
SCREWDRIVERS
Cushion grip handle allows for greater torque and comfort. Patented Tip-Ident
quickly identifies the type of screwdriver and tip orientation. Premium chrome
plated for smooth feel and corrosion resistance. Internal flanges inside handle
provide solid, twist-resistant blade anchor. Special heat-treated shafts.
Precision-machined tip for exact fit. Meets or exceeds applicable ASME/ANSi
specs. Built to handle the tough jobs with ease.
ITEM #
309176
309060
309079
DESC
602-12 SCREWDRIVER HD ROUND SHANK
3/8X12IN
600-4 SCREWDRIVER HD SQUARE SHANK
1/4INX4IN
600-6 SCREWDRIVER HD SQUARE SHANK
5/16X6IN
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
29.88
A
CY.YLX
[email protected] EA
14.80
A
Y.AHX
[email protected] EA
17.89
A
CZ.YOX
STANLEY CABINET TIP FATMAX
SCREWDRIVER
Ergonomically designed tri-lobular handle design provides maximum tip
torque. Slip-resistant rubber grip, high strength nylon handle core overmolded onto bar for more torque handling and impact resistance. Precision
machined and sand blasted tip grips fastener securely and resists slip out.
Lacquer coated bar resists rust. Heat-treated tip for durability. Tip
identification symbol molded onto side of handle.
ITEM #
125318
DESC
62-554 SCREWDRIVER 3/16X4 CABINET TIP
FATMX
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
3.67
A
L.HEX
123
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Slotted Tip
GREAT NECK PROFESSIONAL ROUND
SHANK SCREWDRIVERS
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Slotted Tip
SHEFFIELD SLOTTED SCREWDRIVER
Large tough super shock and wear resistant hi-impact
clear amber handles with black fluted embossed inlay.
Polished blades manufactured of chrome vanadium
steel with precision ground tips. Round shank. Slotted screwdriver. 1/8"x3".
Carded.
ITEM #
829900
DESC
G10C SLOTTED SCREWDRIVER 3INX1/8IN
829714
G43C SLOTTED SCREWDRIVER 4INX3/16IN
829811
G44C SLOTTED SCREWDRIVER 4INX1/4IN
829692
G63C SLOTTED SCREWDRIVER 6INX3/16IN
829803
G64C SLOTTED SCREWDRIVER 6INX1/4IN
830046
G66C SLOTTED SCREWDRIVER 6INX5/16IN
829757
G88C SLOTTED SCREWDRIVER 3/8INX8IN
SP UOM
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
PRICE
2.94
C.HLX
3.67
L.CAX
4.07
L.VEX
4.16
L.VHX
4.65
L.HRX
6.98
V.CVX
8.32
V.AVX
Sheffield 1/8'' x 3'' Slotted Screwdriver. CR-V steel shaft for strength and
durability. Magnetic tip. Ergonomic rubber grip handle with Sheffield Oval-Grip
pattern.
ITEM #
237051
58701 SLOTTED SCREWDRIVER 1/8X3IN
SP
[email protected]
237035
58703 SLOTTED SCREWDRIVER 1/4X4IN
[email protected]
UOM
EA
A
EA
A
PRICE
2.20
C.OXZ
3.72
L.LXZ
KLEIN TOOLS KEYSTONE TIP
SCREWDRIVER
Built to handle tough jobs with ease. Hex bolster reinforces shank for hard use
and allows wrench assisted turning. Cushion-grip handle allows for greater
torque and comfort. Patented Tip-Ident quickly identifies the type of
screwdriver and screwdriver tip orientation.
ITEM #
439886
384844
DESC
602-4 SCREWDRIVER 1/4 KEYSTONE TIP 4IN
SHANK
602-6 SCREWDRIVER ROUND SHANK CUSH
GRIP 5/16X6IN
SP UOM PRICE
[email protected] EA
14.02
A
Y.OVX
[email protected] EA
17.15
A
CZ.VOX
KLEIN TOOLS CABINET-TIP
SCREWDRIVER
GREAT NECK "AA SERIES"
SCREWDRIVER
Slotted. High carbon steel blades. Nickel plated. Color coded (Slotted has blue
flutes). Packaged with plastic hang tabs.
DESC
DESC
ITEM #
106127
AA43C SCREWDRIVER CAB 4X3/16IN
SP
[email protected]
106372
AA44C SCREWDRIVER 4X1/4IN
[email protected]
106399
AA63C SCREWDRIVER ELEC 6X3/16
[email protected]
106402
AA64C SCREWDRIVER 6X1/4IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
1.84
C.XAX
1.74
C.XCX
2.31
C.OHX
1.96
C.CEX
Cushion-grip handle for greater torque and comfort. Premium chrome-plated
for smooth feel and corrosion resistance. Internal flanges inside handle
provide solid, twist-resistant blade anchor. Special heat-treated shafts.
Precision-machined tip for exact fit. Meets or exceeds applicable ASME / ANSI
specifications. Narrow cabinet tip permits blade access where space is limited.
Patented Tip-Ident? quickly identifies the screwdriver type and tip orientation.
ITEM #
439924
439908
DESC
601-4 SCREWDRIVER 3/16IN CABINET TIP 4IN
RD SHANK
601-8 SCREWDRIVER 3/16IN CABINET TIP 8IN
RD SHANK
SP UOM PRICE
[email protected] EA
11.69
A
H.AXZ
[email protected] EA
13.65
A
Y.CXZ
KLEIN TOOLS CABINET-TIP
SCREWDRIVER
Starts and drives screws with one hand when working in hard-to-reach
spaces. Cushion-Grip handle provides superior torque and comfort with nonslip grip.
Cushion-grip handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion
resistance. Internal flanges inside handle provide solid,
twist-resistant blade anchor. Special heat-treated
shafts. Precision-machined tip for exact fit. Meets or exceeds applicable ASME
/ ANSI specifications. Crank-action handle spins screws fast with one hand.
Saves time and effort, especially on long-threaded screws in switch plates,
light fixtures, etc.
ITEM #
384534
ITEM #
384992
KLEIN TOOLS 1/4" SLOTTED SCREWHOLDING SCREWDRIVER
124
DESC
32215 SCREWDRIVER SLOTTD SCREW
HOLDING 1/4IN
SP UOM PRICE
[email protected] EA
12.40
A
A.LRX
DESC
SP UOM PRICE
15.78
CX.ELX
670-6 ROTARY SCREWDRIVER CUSHION GRIP [email protected] EA
3/16INX6IN
A
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Phillips Tip
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Phillips Tip
KLEIN TOOLS PROFILATED PHILLIPS TIP
SCREWDRIVERS
CRESCENT PHILLIPS HEAD
SCREWDRIVERS
Precision-machined tip provides accurate fit and torque without slippage.
Premium chrome-plated for smooth feel and corrosion resistance. Tip-Ident?
quickly identifies the screwdriver type and tip orientation. Internal flanges
inside handle provide solid, twist-resistant blade anchor. Cushion-Grip handle
for greater torque and comfort. Special heat-treated shafts. Meets or exceeds
applicable ASME / ANSI specifications.
Rubber Grip. Round blades. Ergonomic, high efficiency, high torque handle.
Cushioned rubber cover for comfort and slippage control. Tool steel shafts for
strength and durability. Bright zinc plated blade to prevent corrosion. #1 Pt - 4"
Blade - 8-1/4" Overall Length.
ITEM #
308943
308978
DESC
SP UOM PRICE
11.18
A
H.VRX
[email protected] EA
12.91
A
A.RCX
603-3 SCREWDRIVER - CUSHION GRIP #1 3IN [email protected] EA
603-4 SCREWDRIVER-ROUND SHANK # 2
4IN
Full-size rubber grip handle. Baron steel blade. Precision machined black
oxide tip. Chrome-plated for corrosion resistance. Phillips tip identification.
Rubber Grip.
486914
DESC
65-902 PHPS SCREWDRIVER 2 POINT X 4IN
VINYL GRIP
65-903 PHPS SCREWDRIVER 3 POINT X 6IN
VINYL GRIP
SP UOM PRICE
[email protected] EA
5.88
A
V.VXZ
[email protected] EA
9.32
A
H.CZX
STANLEY PHILLIPS HEAD
SCREWDRIVERS
Ergonomic handle for comfortable grip. Alloy steel nickel protected blades for
long life. Hardened tips for non-slip fit. #1 Pt.
ITEM #
163848
163856
DESC
60-001 SCREWDRIVER #1PT PHILLIPS
HEAD 7-5/8
60-002 SCREWDRIVER #1 PT PHILLIPS
HEAD 7-5/8IN
INFO SP UOM
#1 PT [email protected] EA
A
#2 PT [email protected] EA
A
PRICE
1.83
C.VXZ
1.82
C.OAX
STANLEY FATMAX PHILLIPS
SCREWDRIVERS
125210
125164
125156
DESC
INFO
SP UOM
62-559 SCREWDRIVER 7-1/2"OVERALL LENGTH [email protected] EA
#1X3 PHILLIPS FATMAX
A
62-560 SCREWDRIVER 3-1/2"OVERALL LENGTH [email protected] EA
#2 PHILLIPS FATMAX
A
62-561 SCREWDRIVER 9"OVERALL LENGTH
[email protected] EA
#2X4 PHILLIPS FATMAX
A
62-562 SCREWDRIVER 11"OVERALL LENGTH
[email protected] EA
#3X6 PHILLIPS FATMAX
A
www.wallacehardware.com
INFO
#1 PT - 4" BLADE - 8-1/4""
OVERALL LENGTH"
SP UOM PRICE
[email protected] CD 3.17
A
L.OEX
Dual material handle designed for improved comfort
and performance. Chrome plated blade provides corrosion resistance and
easy cleaning. Black oxide tip provides a strong and durable construction with
blasted tip to reduce slippage. Includes a hang hole for easy storage and can
be used with an additional driver to create a T-Handle. The sizes of the driver
are laser etched on the blade for quick and easy reference.
ITEM #
451703
PRICE
3.23
L.VZX
2.76
L.XAX
3.66
L.HRX
5.15
O.YOX
DESC
SP UOM
[email protected] CD
A
CSDP56V PHILLIPS SCREWDRIVER #3X6IN
PRICE
5.61
V.LEX
CRESCENT PHILLIPS HEAD
SCREWDRIVERS
Rubber Grip. Round blades. Ergonomic, high efficiency, high torque handle.
Cushioned rubber cover for comfort and slippage control. Tool steel shafts for
strength and durability. Bright zinc plated blade to prevent corrosion. #2 Pt 4" Blade - 8-7/8" Overall Length.
ITEM #
348767
106518
Ergonomic tri-lobular handles. Slip-resistant rubber grip for user comfort. High
strength nylon handle core over molded onto bar helps increase
torque/impact resistance. Precision machined - sand blasted and heat treated
tips. Lacquer coated bar resists rust. 7-1/2"overall Length, 3"x3/16" Blade.
ITEM #
125202
DESC
CSDP34V
SCREWDRIVER
3/16X4
APEX CRESCENT PHILLIPS HEAD
SCREWDRIVER
STANLEY PHILLIPS HEAD
SCREWDRIVERS
ITEM #
486906
ITEM #
348643
DESC
CSDP44V
SCREWDRIVER #2
DURA
RA44C
SCREWDRIVER #2
4X1/4IN
INFO
#2 PT - 4" BLADE - 8-7/8""
OVERALL LENGTH"
SP UOM PRICE
[email protected] CD 3.72
A
L.AXZ
[email protected] EA
A
1.64
X.YEX
GREAT NECK ALL AMERICAN #1
SCREWDRIVER
Extruded high impact plastic handle. High carbon steel
blade. Nickel plated. Plastic hang tab package.
ITEM #
106461
DESC
RA33C SCREWDRIVER #1 3X3/16IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
1.80
C.XAX
125
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Phillips Tip
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Phillips Tip
GREAT NECK PHILLIPS SCREWDRIVER
KLEIN TOOLS PHILLIPS SCREWDRIVER
No. 0 Point Phillips Screwdriver measures 2-1/2 inches
and features nickel plated high carbon steel blades,
and high impact clear amber handles with black flutes
embossed inlay.
Cushion-Grip handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion
resistance. Internal flanges inside handle provide solid,
twist-resistant blade anchor. Special heat-treated
shafts. Precision-machined tip for exact fit. Meets or
exceeds applicable ASME / ANSI specifications. Crank-action handle spins
screws fast with one hand. Saves time and effort, especially on long-threaded
screws in switch plates, light fixtures, etc.
ITEM #
830895
829870
829951
830178
DESC
SP UOM PRICE
[email protected] EA
2.94
A
C.HVX
GR33C #1 PHILLIPS SCREWDRIVER 3INX3/16IN [email protected] CD 3.79
A
L.LOX
GR44C #4 PHILLIPS SCREWDRIVER 4INX1/4IN [email protected] CD 4.04
A
L.OAX
GR66C 3PT PHILLIPS SCREWDRIVER 6X5/16IN [email protected] CD 8.57
A
E.XYX
G0PC SCREWDRIVER PHILLIP HEAD #0
ITEM #
385018
DESC
SP UOM PRICE
16.00
CX.RZX
682-6 ROTARY SCREWDRIVER CUSHION GRIP [email protected] EA
PHILLIPS #2
A
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Square Tip
FULLER PRO 300 FLAT HEAD
SCREWDRIVERS
KLEIN TOOLS #2 PHILLIPS SCREWHOLDING SCREWDRIVER
Starts and drives screws with one hand when working in hard-to-reach
spaces. Cushion-Grip handle provides superior torque and comfort with nonslip grip.
ITEM #
384542
439916
DESC
Pocket screwdriver with clip. Chrome vanadium steel blade for strength and
durability. One piece, shatter-proof handle. Extra large fluted handles for
maximum comfort and torque. 1/8 in. tip width. 3-1.2 in. blade length.
ITEM #
349747
DESC
110-0301B POCKET SCREWDRIVER
SP
[email protected]
UOM
EA
A
PRICE
1.67
C.OXZ
SP UOM PRICE
12.40
A.LRX
16.36
CX.YCX
32216 SCREWDRIVER PHPS SCREW HOLDING [email protected] EA
#2X7IN
A
603-10 SCREWDRIVER #2 PH PROFILATED RD [email protected] EA
SHANK 10IN
A
GREAT NECK SQUARE TIP
SCREWDRIVER
Color coded plastic handles. #2 Robertson square tip.
ITEM #
370282
KLEIN TOOLS PROFILATED PHILLIPS-TIP
SCREWDRIVER
Cushion-Grip handle for greater torque and comfort. Premium chrome-plated
for smooth feel and corrosion resistance. Internal flanges inside handle
provide solid, twist-resistant blade anchor. Special heat-treated shafts.
Precision-machined tip for exact fit. Meets or exceeds applicable ASME / ANSI
specifications. Patented Tip-Ident? quickly identifies the screwdriver type and
tip orientation. Tip is precision-machined to provide a more consistent
geometric symmetry than conventional Phillips-tip screwdrivers. Provides
accurate fit and torque without slippage.
ITEM #
384852
384860
126
DESC
603-6 SCREWDRIVER ROUND SHANK CUSH
GRIP #3 6X11
603-7 SCREWDRIVER RD SHK CUSH GRIP #2
7X11-5/16IN
SP UOM PRICE
[email protected] EA
17.15
A
CZ.VOX
[email protected] EA
14.44
A
Y.ROX
DESC
CRO2 SQUARE TIP #2 SCREWDRIVER
SP
[email protected]
UOM
EA
A
PRICE
4.41
L.RLX
UNITED STATES HARDWARE MOBILE
HOME SCREWDRIVER
No. 2 square head.
ITEM #
153885
DESC
S-916C SCREWDRIVER #2 SQUARE HEAD
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] CD
A
PRICE
9.45
E.AYX
www.wallacehardware.com
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Standard Star Tip
Screwdrivers and Nutdrivers, Screwdrivers,
Screwdriver Sets
STANLEY PRO-DRIVER STAR DRIVER
SCREWDRIVER
GARDNER BENDER INSULATED SCREWDRIVER
SET
High performance meets or exceeds ANSI standards. Ergonomic tri-lobular
handle offers more torque and comfort. Bar molded into handle for greater
torque. Lacquer coated bar. Sand blasted and heat treated tip. Slip-resistant
grip.
Set includes 1 ea. #2 Phillips & 1 ea. 3/16" Std.
ITEM #
125342
DESC
SP UOM PRICE
62-565 SCREWDRIVER T20X4 FATMAX STAR [email protected] EA
4.25
A
O.LCX
Ergonomically designed tri-lobe handle provides maximum tip torque. Durable
bi-material handle with comfort grip. Rugged handle resists job site
environment and heavy-duty use. Magnetic tips for secure grip on fasteners.
Overall length: 7-1/2 inches.
DESC
62-564 TORX TIP SCREWDRIVER T15 X 3IN
SP UOM
[email protected] EA
A
PRICE
4.03
O.CZX
Sheffield T15 x 3'' Star Driver. CR-V steel shaft for strength and durability.
Magnetic tip. Ergonomic rubber grip handle with Sheffield Oval-Grip pattern.
DESC
SP
UOM
58740 TORX SCREWDRIVER T15X3IN STAR [email protected] EA
A
PRICE
3.67
L.CAX
Screwdrivers and Nutdrivers, Screwdrivers,
Screwdriver Sets
HOWARD BERGER 2 PIECE POCKET
SCREWDRIVER SET
Magnetic. Contains: 1 slotted and 1 phillips. Pocket clip. Ideal for
small repairs.
ITEM #
236357
DESC
79162 SCREWDRIVER SET POCKET MINI
2PC
SP UOM PRICE
[email protected] ST
1.85
A
C.XYX
DESC
www.wallacehardware.com
ITEM #
155233
DESC
SP UOM PRICE
20.36
A
CE.VYX
66-565 SCREWDRIVER SET 6PC VINYL GRIP [email protected] EA
Features 6 of the most popular sizes. Heat treated alloy steel
ensures long life. Large, comfortable ergonomic handles.
Includes: 4" and 6" standard; 3" and 6" cabinet; 1pt. and 2 pt.
Phillips.
ITEM #
163902
DESC
SP
UOM PRICE
7.38
A
E.EZX
60-060 SCREWDRIVER SET STANDARD 6PC [email protected] ST
STANLEY 6 PC. JEWELERS
SCREWDRIVER SETS
Six precision screwdrivers feature swivel-head handles.
Bright plated shafts fluted for better grip. Hardened
and tempered steel blades with blued finish to resist
corrosion. Plastic storage case to index tools. Set contains: #0 and #1 point
phillips; 1.4mm, 1.8mm, 2.3mm and 3.0mm slotted.
ITEM #
310301
DESC
66-039 SCREWDRIVER SET 6PC
SP
[email protected]
UOM
EA
A
PRICE
6.43
V.AEX
Contains 0 point and 1 point phillips tip screwdrivers, and 1.4mm,
2.0mm, 2.4mm and 3.0mm slotted screwdrivers. Features
swiveled handles. Tough plastic shafts and soft cushion grip allow
for greater comfort. Plastic storage cases to index tools included.
The two most popular sizes. Heat treated alloy steel
ensures long life. Large, comfortable, ergonomic
handles. 4" Standard and 2 pt. Phillips.
60-020 SCREWDRIVER SET STANDARD
FLUTED 2PC
Full size vinyl grip handles. Alloy steel blades. Precision cold
formed black oxide Phillips tip. Chrome plated for corrosion
resistance. Includes: 4" and 6" Standard, 3" and 6" Cabinet, 1
pt. and 2 pt. Phillips.
STANLEY 6 PC. PRECISION SCREWDRIVER SETS
STANLEY 2 PC. SCREWDRIVER SETS
ITEM #
163899
SP UOM PRICE
[email protected] EA
15.25
A
Y.EXZ
STANLEY 6 PC. SCREWDRIVER SETS
SHEFFIELD STAR DRIVER
ITEM #
237027
DESC
SCE-3262 INS SCRWDRVR SET 2PC #2 PHLPS
& 3/16"
STANLEY 6 PC. SCREWDRIVER SETS
STANLEY FATMAX STAR SCREWDRIVER
ITEM #
446777
ITEM #
800463
SP UOM PRICE
[email protected] ST
2.25
A
C.HCX
ITEM #
172588
DESC
SP
UOM
66-052 PRECISION SCREWDRIVER SET 6PC [email protected] EA
1-800-776-0976 NOVEMBER
2016
A
PRICE
5.08
O.AZX
127
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Screwdriver Sets
CRESCENT 4 PC. DURA-DRIVER
SCREWDRIVER SETS
HILLMAN EYEGLASS REPAIR KIT
Includes 1 screwdriver, 1 magnifier, standard and
metric screws and storage bag.
Ergo handles. Set includes: 2 pt. x 4" Phillips, 1 pt. x 4"
Phillips, 1/4" x 4" straight, 3/16" x 3" straight.
ITEM #
344842
Screwdrivers and Nutdrivers, Screwdrivers,
Screwdriver Sets
DESC
SP
[email protected]
CSD4PC SCREWDRIVER SETDURA- 4PC
UOM
ST
A
PRICE
12.44
Y.OCX
ITEM #
103624
DESC
701310 EYEGLASS REPAIR KIT
SP
[email protected]
UOM
CD
A
PRICE
2.75
C.OVX
CRESCENT 6 PC. PRECISION
SCREWDRIVER SET
Crescent brand 6-piece precision screwdriver set is
designed to be used for jewelry repair, electronics repair
and other detail work. Set includes both slotted and
Phillips drivers.
ITEM #
228524
DESC
SP
UOM PRICE
14.70
A
CZ.XVX
SDPS6 SCREWDRIVER SET PRECISION 6PC [email protected] ST
Cushion-Grip handles for superior torque and comfort.
Patented Tip-Ident? quickly identifies the type of screwdriver and the tip
orientation so you can easily engage the screwdriver tip with the screw.
Precision-machined tip for exact fit. Double wings inside handle provide solid,
twist-resistant blade anchor. Includes one Phillips-tip, two keystone-tip and
one cabinet-tip screwdrivers.
GREAT NECK SCREWDRIVER SET
6 piece set with storage rack. 1 each of the following sizes: 4"
x 1/4", 6" x 3/16", 6" x 1/4", 4" x 1/4"no. 2 pt., 4" x 3/16", 3" x
3/16" No. 1 pt. High carbon steel blades, nickel plated. Color
coded: Phillips has Red flutes, Slotted has Blue flutes.
ITEM #
162132
DESC
AAR6 SCREWDRIVER SET 6 PC
SP
[email protected]
KLEIN TOOLS 4-PIECE CUSHION-GRIP
SCREWDRIVER SET
UOM
ST
A
PRICE
9.01
E.LYX
ITEM #
384879
DESC
85105 SCREWDRIVER SET CUSHION GRIP
4PC
SP UOM PRICE
[email protected] ST
53.04
A
OE.ORX
GREAT NECK SCREWDRIVER SETS
6 piece precision screwdriver set. Swivel handles. Nickel plated.
1 each of: 0.8mm - 1/32", 1.8mm-5/64", 3mm-1/8", 1.2mm-3/64",
2.4mm-3/32", 3.5mm-9/64". Comes in a see-thru case.
ITEM #
175463
DESC
SP UOM
[email protected] EA
A
GP6C SCREWDRIVER SET PRECISION 6PC
PRICE
2.74
C.RXZ
Set includes the following: Small hook, small 90 pick, small
complex probe, and small 180 hook. Each hook and pick
features four sided high torque acetate handles which are
highly impact and solvent resistance. The custom alloy steel
blades are heat treated for exceptional strength and durability. The blades are
zinc plated for superior corrosion resistance. The products in this set are
useful on small fuses, wire plugs, and "O"'rings. Made in USA.
KLEIN TOOLS 7-PIECE CUSHION GRIP
SCREWDRIVER SET
General-purpose selection of the most frequently used
screwdrivers. Includes: three cabinet-tip, two Phillips-tip
and two keystone-tip styles.
ITEM #
331236
128
DESC
85076 SCREWDRIVER SET 7PC
SP
[email protected]
CHANNELLOCK 4PC HOOK & PIC SET
PROFESSIONAL SCREWDRIVER SET
UOM
ST
A
PRICE
89.57
EY.HCX
ITEM #
537799
DESC
HP-4A HOOK & PICK SET 4PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
ST
A
PRICE
12.16
Y.CVX
www.wallacehardware.com
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Screwdriver Sets
Screwdrivers and Nutdrivers, Screwdrivers,
Screwdriver Sets
CHANNELLOCK 6 PC. SCREWDRIVER
SET
CHANNELLOCK 5 PC. PROFESSIONAL
PRECISION TORX SCREWDRIVER SET
Four sided high torque acetate handles. Acetate
handles highly impact resistant and exceptional solvent
resistance. High polished alloy steel blades that are
heat treated for exceptional strength and durability.
Precision machined vapor blast tips. Made in USA. Channellock's SD-6A 6
piece screwdriver set includes: Phillips sizes #1x3", #2x4", #2x6", Slotted sizes
1/4x4", 1/4x6", 3/16x3". Each screwdriver features four sided high torque
acetate handles which are highly impact and solvent resistance. The high
polished alloy steel blades are heat treated for exceptional strength and
durability. The blades are nickel chrome finished for superior corrosion
resistance and feature precision machined vapor blasted tips, preventing
flaking or chipping. Made in USA.
Custom Heat-Treated Alloy Steel Blade. Nickel Chrome
Finish for Exceptional Corrosion Resistance. Precision
Machined Vapor Blast Tip for Precise Fit. Designed with
a high acetate handle for improved control. Made in the
USA.
ITEM #
537837
SD-6A SCREWDRIVER SET 6PC
DESC
SP
[email protected]
537810
SD-10A SCREWDRIVER SET 10PC
[email protected]
UOM
ST
A
ST
A
PRICE
39.18
LY.VRX
67.83
EC.XZZ
SP
UOM
SD-5A PRECISION SCREWDRIVER SET 5PC [email protected] ST
A
PRICE
18.06
CO.EAX
Perfect for all types of work applications including auto,
construction, electrical, home repair, mechanical, and
plumbing the Channellock TP-5A professional torx
screwdriver set is made directly in the USA and will
provide the user with 5 torx screwdrivers. The TP-5A includes Channellock
T051AB T5 x 1-1/2-inch Screwdriver, T062AB T6 x 2-inch Screwdriver, T072AB
T7 x 2-inch Screwdriver, T082AB T8 x 2-1/2-inch Screwdriver, T092AB T9 x 21/2-inch Screwdriver.
DESC
TP-5A PRECISION TORX SET 5PC
www.wallacehardware.com
UOM
ST
A
PRICE
16.98
CL.HZX
JMK/IIT FLIPOVER SCREWDRIVER
DISPLAY
DESC
64901 SCREWDRIVER FLIPOVER 6N1
SP
[email protected]
UOM
EA
A
PRICE
3.72
L.LEX
CB ENTERPRISES 6-IN-1 SCREWDRIVER
Approximately 7 inches long. Red plastic handle that
holds 6 tips/tools. Double ended drivers: #1 & #2
Phillips: 3/16 inches & 1/4 inches slotted. 1/4 inch & 5/16
inch nut drivers. 12 piece.
ITEM #
444580
DESC
SP
UOM PRICE
5.75
A
O.YRX
7544D 6-IN-1 SCREWDRIVER DISPLAY (12PCS) [email protected] EA
Screwdrivers and Nutdrivers, Screwdrivers,
Ratcheting Screwdrivers
CHANNELLOCK 5 PC. PROFESSIONAL
PRECISION TORX SCREWDRIVER SET
ITEM #
537845
SP
[email protected]
Screwdrivers and Nutdrivers, Screwdrivers,
Screwdriver Displays
ITEM #
128260
Built with a high torque acetate handle the Channellock
professional screwdriver set is made directly in the USA
and will provide the user with 5 screwdrivers for more precise screwing of
screws for all different types of work applications including auto, construction,
electrical, home repair, mechanical, and plumbing. The SD-5A includes
Channellock P000AB #000 x 1-1/2-inch Screwdriver, P002AB #00 x 2-inch
Screwdriver, S332AB 3/32-inch x 2-inch Screwdriver, S182AB 1/8-inch x 2-1/4inch Screwdriver, P021AB #0 x 2-1/2-inch Screwdriver. Made in USA.
DESC
DESC
TS-5A TORX SET 5PC
Chrome plated tube with 1/4" and 5/16" Nut drivers on opposite sides. High
visibility Orange and Green handles make them easy to locate. For the most
popular Slotted, Phillips and Hex fasteners. Spring loaded steel ball bearings
hold bits in place. 12 pack display.
CHANNELLOCK 5 PC. PROFESSIONAL
PRECISION PROFESSIONAL
SCREWDRIVER SET
ITEM #
537829
ITEM #
537853
SP
[email protected]
UOM
ST
A
PRICE
11.38
A.EZX
CHANNELLOCK MULTI-BIT RATCHETING
SCREWDRIVER
Ratcheting action for fast, easy, two-way operation. 28tooth ratchet. 225 lbs of torque. Comfort grip with storage in handle.
ITEM #
336548
DESC
131CB RATCHET SCREWDRIVER 13N1
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
36.33
LH.OCX
129
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Ratcheting Screwdrivers
STANLEY STUBBY RATCHETING MULTIBIT SCREWDRIVER
CB ENTERPRISES 6-IN-1 SCREWDRIVER
Magnetic bit holder for speedy and secure changeover of bits. Durable bimaterial handle with comfort grip. Includes six chrome vanadium bits with
internal bit storage for easy access to bits-end cap carries six bits. Threeposition switch enables clockwise and counter-clockwise ratcheting and
locked position. Includes: 1/8 in. standard, 3/16 in. standard, 1/4 in. standard, 1
pt. Phillips, and two 2 pt. Phillips.
ITEM #
446807
DESC
DESC
3518 6-IN-1 SCREWDRIVER RED
SP
[email protected]
UOM
EA
A
PRICE
5.66
V.XVX
A multi purpose 11-in-1 screwdriver/nutdriver.
DESC
SP UOM PRICE
[email protected] EA
34.40
A
LZ.YOX
32558 RATCHETING SCREW- DRIVER HVY
DUTY CUSH GRP
STANLEY MULTIBIT RATCHETING
SCREWDRIVER SET
20 pc. Three-position switch enables clockwise and
counter-clockwise ratcheting and locked position. Bit storage in handle for
quick and easy access. Ergonomically designed handle. Magnetic bit holder
for speedy and secure changeover of bits. Includes: 14 screwdriver bits, 6
nutdrivers, storage rack.
DESC
ITEM #
442127
KLEIN TOOLS 11-IN-1 SCREWDRIVER
High-torque ratcheting mechanism for tough applications. Interchangeable
shaft holds 6 universal tips; converts to 3 nut driver sizes and 1 hex driver. 3way ratcheting mechanism for forward, reverse and locked positions. Nut
drivers are heat-treated for added strength and improved torque. CushionGrip handle provide superior torque and comfort. Contains: 3/16" and 1/4"
slotted, #1 and #2 Phillips, 1/4", 5/16", and 3/8" nut drivers, #1 and #2 squarerecess, 3/8" hex driver.
ITEM #
446785
Approximately 7" long. Red plastic handle that holds 6
tips/tools. Double ended drivers: #1 & #2 phillips: 3/16"
& 1/4" slotted. 1/4" & 5/16" nut drivers. Packed/10.
SP UOM PRICE
[email protected] EA
7.22
A
E.EAX
66-358 STUBBY MULTI-BIT RATCHETING
SCREWDRIVER
KLEIN TOOLS RATCHETING MULTI-BIT
SCREWDRIVER/NUT DRIVER
ITEM #
384887
Screwdrivers and Nutdrivers, Screwdrivers,
Multi-Bit Screwdrivers
SP
UOM PRICE
16.67
A
CL.YCX
ITEM #
002194
DESC
32500 11-N-1 SCREWDRIVER /NUTDRIVER
SP UOM
[email protected] ST
A
PRICE
26.39
CH.EYX
KLEIN TOOLS CONDUIT-FITTING AND
REAMING SCREWDRIVER
Hooded-blade design keeps tip from slipping out of screws, especially when
tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged
use. Reams and smoothes 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) thin-wall
conduit ends to protect wire and permit correct installation of fittings. Reams
both the inside and outside of the conduit at the same time. Longer cushiongrip handle provides comfort and more torque fo
ITEM #
331198
62-574 MULTIBIT SCREWDRIVER SET 20PC [email protected] ST
DESC
SP UOM PRICE
[email protected] EA
47.88
A
OC.YLX
85191 CONDUIT-FITTING & REAMING
SCREWDRIVER
Screwdrivers and Nutdrivers, Screwdrivers,
Multi-Bit Screwdrivers
VERMONT AMERICAN 7" MAGNETIC
SCREWDRIVER SETS
CHANNELLOCK 6-N-1SCREWDRIVER
Swap easily between 6 different tips. High torque 3sided code Blue grips. Not magnetic.
ITEM #
385506
130
DESC
61CB SCREWDRIVER 6-N-1
SP
[email protected]
7 piece RV and mobile home magnetic screwdriver set contains: square recess
#1 and #2, 5/32" clutch, Phillips #2 and 6-8 slotted insert bits with hand driver.
High impact acetate handle. Comfortable grip and compartment for bit
storage.
UOM
EA
A
PRICE
7.04
E.LYX
ITEM #
366927
DESC
15493 SCREWDRIVER SET MAG 7IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
13.49
A.LVX
www.wallacehardware.com
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Multi-Bit Screwdrivers
STANLEY 6-WAY C-GRIP
SCREWDRIVERS
AMERICAN SAW LENOX SCREWDRIVER
All-in-one screwdriver with 6 tips: #1 and #2 Phillips, 1/4" and 3/16" Slotted,
1/4" and 5/16" Nut Driver. Convenient and space saving, ideal for kitchen
drawer or car. Ergonomically designed bi-material handle for superb comfort.
Tri-lobe shape fits hand comfortably. Soft, diamond textured handle provides a
firm grip for extra torque without strain. Bar is chrome plated for rust
resistance. Attach wrench to bolster nut for additional leverage and
ITEM #
264431
DESC
68-012 6-WAY SCREWDRIVER COMFORT
GRIP
SP UOM PRICE
[email protected] EA
4.79
A
O.RXZ
Ergonomic, high efficiency, high torque handle.
Cushioned rubber cover for comfort and slippage control. Industrial strength
S2 steel bits provides longest service without breakage. Includes: #1 Phillips x
3/16" slotted, #2 Phillips x 9/32" slotted, 1/4" x 5/16" and 7/16" Nutdrivers.
DESC
Lenox 9-in-1 Screwdriver is ideal for anyone who deals
with a variety of different fasteners on a routine basis,
like electricians and maintenance workers. The walls
on the nut drivers are 25% thicker than traditional nut drivers that reduce
stripping and provides a longer life. The tool has a size 1 Phillips bit, size 2
Phillips bit, 3/16-Inch slot bit, 1/4-Inch slot bit, size 2 square drive, size 3 square
drive, 1/4-Inch nut driver, 5/16-Inch nut driver and a 3/8-Inch nut driver. It
features a slip resistant, ergonomic grip that maximizes the amount of torque.
It has an overall length of 6-1/4 inches and the handle of the screwdriver is
blue in color.
ITEM #
425635
DESC
SP
[email protected]
23932 LENOX 9N1 SCREWDRIVER
UOM
EA
A
PRICE
15.29
CX.OLX
JMK/IIT 6-N-1 SCREWDRIVER
COOPER 7-IN-1 SCREWDRIVER
ITEM #
125431
Screwdrivers and Nutdrivers, Screwdrivers,
Multi-Bit Screwdrivers
SP
UOM PRICE
8.16
A
R.CLX
Non slip cushion grip handle for better comfort and a secure hold. Bit stoarge
in handle. Sandblasted Chrome Vanadium steel bits. Stong magnetic bit
holder. Includes: Flat 3/16" & 1/4", Phillips #1 & #2, Star Drive Sd15 & Sd20 Bits.
ITEM #
128244
DESC
SP
[email protected]
64041 SCREWDRIVER CUSH 6-N-1
UOM
EA
A
CMBD7P SCREWDRIVER CUSHION GRIP 7N1 [email protected] EA
PRICE
3.75
L.CAX
HOWARD BERGER 6-N-1 SCREWDRIVER
Heavy duty. Chrome plated for longer life. Industrial
tool steel bits, heat-treated, tempered, stress relieved.
Bits include: 3/16 slotted, 9/32 slotted, #1 Phillips, #2
Phillips, 1/4" nutdriver, and 5/16 nutdriver.
IRWIN 8-N-1 SCREWDRIVERS
8-in-1 multi-tool stubby screwdriver. Contains the
following 8 bits: T25 torx, T20 torx, T15 torx, #1 phillips,
#2 phillips, 3/16" flat, 1/4" flat, and 1/4" nut-setter. Ergonomic ProTouch? grip
provides maximum torque and comfort with slip resistant grip. Internal storage
keeps bits and nut setters locked in place and close at hand. Screwdriver tip is
magnetized.
ITEM #
238163
DESC
4935586 8-N-1 MULTI-TOOL STUBBY
SCREWDRIVER
SP UOM PRICE
[email protected] EA
6.98
A
V.RAX
ITEM #
733970
DESC
79161 SCREWDRIVER 6 IN 1HEAVY DUTY
SP
[email protected]
UOM
EA
A
PRICE
4.35
L.EAX
SHEFFIELD 5-IN-1 SCREWDRIVER
Sheffield 5 in 1 Screwdriver. Includes bit sizes 3/16'', 1/4'', #1 and #2 Phillips,
shaft works as 1/4'' nut driver. Ergonomic rubber grip handle with Sheffield
Oval-Grip pattern.
ITEM #
237116
DESC
58760 SCREWDRIVER 5N1
SP
[email protected]
UOM
EA
A
PRICE
6.00
O.ELX
IRWIN 9-N-1 SCREWDRIVERS
GREAT NECK 6-IN-1 SCREWDRIVER
Ergonomic ProTouch grip provides maximum torque and comfort. Slip
resistant grip. Internal storage keeps bits and nut setters locked in place and
close at hand. 9 bits and nut setters for use on a variety of fasteners and nuts.
Screwdriver features: 1/4" Standard 3/16" Standard, #1
Pt. Phillips, #2 Pt. Phillips, 1/4" Nut Driver, 5/15" Nut Driver. Heavy-duty
mechanic's style grip. Hi-impact black plastic handle. Tips store in handle.
ITEM #
102636
ITEM #
830879
DESC
2051100CD SCREWDRIVER 9-N-1 MULTITOOL
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
14.57
A
Y.EAX
DESC
SD4BC SCREWDRIVER 6-N-1
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
7.34
V.ORX
131
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Multi-Bit Screwdrivers
Screwdrivers and Nutdrivers, Screwdrivers,
Multi-Bit Screwdrivers
STANLEY FATMAX RATCHETING MULTIBIT SCREWDRIVER
VERMONT AMERICAN MULTI-BIT
MAGNETIC SCREWDRIVER SETS
3-position ratcheting mechanism enables clockwise,
counter clockwise and locked ratcheting positions. Quick release magnetic bit
holder provides for fast and secure bit change capability. Convenient bit
storage. Bi-material textured handle for higher torque. Kit includes: 6 chrome
vanadium bits stored inside the handle for easy access.
Professional. Hexagon shank allows a wrench to be
used for controlled torque. Includes: 3-4,6-8 slotted,
No. 1 and No. 2 Phillips.
ITEM #
446858
DESC
SP
[email protected]
UOM
CD
A
PRICE
12.49
H.EZX
MEGAPRO 15-N-1 SCREWDRIVER
Cushion-Grip handle for greater torque and comfort. End of handle is marked
to quickly identify tool. Features 5/16" & 1/4" nut drivers, #1 and #2 Phillips,
1/4" & 3/16" slotted, T10 & T15 TORX?, and #1 and #2 square-recess. The
following replacement bits are available: see Cat. No. 32482 (#1 Phillips &
3/16" Slotted), Cat. No. 32483 (#2 Phillips & 1/4" Slotted), Cat. No. 32484 (#1
Square & #2 Square), and Cat. No. 32485 (T10 Torx? & T15 Torx?).
DESC
SP UOM
[email protected] EA
A
32477 SCREWDRIVER/NUT DRIVER 10-N-1
Our Original bit load driver is our most popular. Loaded with 7 double end
professional quality bits, this assortment provides the 14 most popular tips for
driving screws. The shaft opening serves as a 1/4" hex driver. Alloy steel shaft.
Palm saver cap. Patented pullout bit cartridge makes it easy to find, change
and store bits. Handle is made from engineered nylon/ABS resin, Triax 1120.
ITEM #
456862
DESC
151NAS 15N1 ORIGINAL L MULTI-BIT
SCREWDRIVER
SP UOM PRICE
[email protected] EA
24.99
A
CL.HAX
PRICE
23.77
CE.AEX
MEGAPRO TAMPER-PROOF 15-N-1
SCREWDRIVER
KLEIN TOOLS SCREWDRIVER/NUT
DRIVER
Cushion grip handle allows for greater torque and comfort. Patented tip-ident
quickly identifies the type of screwdriver and screwdriver tip orientation.
Premium chrome plated for smooth feel and corrosion resistance. Internal
flanges inside handle provide solid, twist resistant blade anchor. Special heattreated shafts. Precision-machined tip for exact fit. Features 5/16" & 1/4" nut
drivers, #1 and #2 Phillips, 1/4" & 3/16" slotted.
ITEM #
211591
DESC
15511 SCREWDRIVER SET W/4 BITS
SP UOM PRICE
[email protected] EA
11.02
A
A.VRX
69-189 FATMAX 6 BIT RATCHETING
SCREWDRIVER
KLEIN TOOLS 10-IN-1
SCREWDRIVER/NUT DRIVER
ITEM #
439851
ITEM #
363057
DESC
32557 SCREWDRIVER/NUT DRIVER MULTIBIT 10N1
SP UOM PRICE
[email protected] EA
24.45
A
CR.OXZ
This 15 in 1 is a must for all commercial/industrial tradesmen i.e. electricians,
locksmiths, telephone technicians, maintenance personnel, etc. The
Tamperproof assortment includes the most popular security bits, including
Spanners, Hex Pins and Torx Pins. The shaft opening serves as a 1/4" hex
driver. EZ guide collar. Palm saver cap. Patented pullout bit cartridge makes it
easy to find, change and store bits. Handle is made from engineered
nylon/ABS resin, Triax 1120.
ITEM #
456866
DESC
151TP 15N1 TAMPER PROOF F MULTI-BIT
SCREWDRIVER
SP UOM PRICE
[email protected] EA
34.99
A
CA.CAX
KLEIN TOOLS STUBBY MULTI-BIT
SCREWDRIVER/NUT DRIVER
MEGAPRO 13-N-1 RATCHETING
SCREWDRIVER
Interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes.
Compact design features standard 1-1/4" shaft allowing easy access to tight
work spaces. Cushion-Grip handle provide greater torque and comfort.
Contains: 3/16" and 1/4" slotted, #1 and #2 Phillips, 1/4" and 5/16" nut drivers.
Patented pullout bit cartridge makes it easy to find, change and store bits.
Handle is made from engineered nylon/ABS resin, Triax 1120. Shaft opening
serves as a 1/4-Inch hex driver. Alloy steel shaft. Palm saver cap keeps you
from getting blisters on your hand.
ITEM #
384895
ITEM #
456867
132
DESC
SP UOM PRICE
17.36
CZ.EHX
32561 STUBBY SCREWDRIVER & NUT DRIVER [email protected] EA
W/CUSH GRIP
A
DESC
211R2C36RD 13N1 1 RATCHETING MULTIBIT
SC
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
38.99
A
LX.EXZ
www.wallacehardware.com
Hand & Power Tools
Screwdrivers and Nutdrivers, Screwdrivers,
Multi-Bit Screwdrivers
MEGAPRO 8-N-1 SCREWDRIVER
Made from Triax ABS resin with S2 steel bits. Rugged, durable and premium
quality.
ITEM #
456863
456864
456865
DESC
SP UOM PRICE
[email protected] EA
13.99
A
H.ERX
[email protected] EA
13.99
A
H.ERX
[email protected] EA
13.99
A
H.ERX
8N1NAS 8N1 MULTI-BIT T SCREWDRIVER
8N1NAS-NGR/BK 8N1 1 MULTIBIT
SCREWDRIVER N
8N1NAS-NOR/BK 8N1 1 MULTIBIT
SCREWDRIVER N
Screwdrivers and Nutdrivers, Nutdrivers,
Nutdrivers
GREAT NECK NUT DRIVER
Ergonomic color coded rubber grip handle. Plated finish to resist rust. SAE
sizes.
ITEM #
329452
58766 NUT DRIVER 5/16IN
DESC
SP
[email protected]
329460
58767 NUT DRIVER 3/8IN
[email protected]
UOM
EA
A
EA
A
Screwdrivers and Nutdrivers, Nutdrivers,
Nutdrivers
GREAT NECK PROFESSIONAL NUT
DRIVER
Highest quality transparent handle with red fluting. Hollow chrome plated
shaft. Color coded handles in accordance with accepted standards. Blades
have hollow shafts and are chrome plated.
ITEM #
126039
ND3C NUT DRIVER 3/16IN
DESC
SP
[email protected]
126055
ND5C NUT DRIVER 1/4IN
[email protected]
126063
ND7C NUT DRIVER 5/16IN
[email protected]
126098
ND8C NUT DRIVER 11/32IN
[email protected]
126101
ND9C NUTDRIVER 3/8IN
[email protected]
126128
ND10C NUT DRIVER 7/16IN
[email protected]
126136
ND11C NUT DRIVER 1/2IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
5.26
O.CLX
5.51
O.LXZ
5.63
O.LHX
5.63
O.OVX
5.63
O.VCX
6.24
O.HCX
6.49
O.AEX
PRICE
4.65
L.HOX
4.21
L.EXZ
CHANNELLOCK 5/16" NUT DRIVER
3-Inch Blade, 7-1/2-Inch Overall Nutdrivers with full hollow shafts. High torque,
3-sided Code Blue grips. Laser etched steel caps for easy identification.
Nutdrivers made to A.N.S.I. standards in China.
ITEM #
379964
GREAT NECK PRO NUT DRIVER
DESC
N516CB NUTDRIVER HOLLOW SHAFT 5/16IN
CODE BLUE
SP UOM PRICE
[email protected] EA
6.24
A
V.RYX
Rubber grip. Highest quality transparent handle with rubber grip for increased
comfort and torque. Semi-hollow chrome plated shaft. Heat treated hardened
steel. Red 2-15/16" Shaft Length.
ITEM #
368245
368253
368288
368296
DESC
ND5RG PRO NUT
DRIVER 1/4IN
ND7RG PRO NUT
DRIVER 5/16IN
ND9RG PRO NUT
DRIVER 3/8IN
ND10R PRO NUT
DRIVER 7/16IN
INFO
RED 2-15/16" SHAFT
LENGTH"
YELLOW 2-15/16" SHAFT
LENGTH"
BLUE 2-15/16" SHAFT
LENGTH"
BROWN 3-1/4" SHAFT
LENGTH"
SP UOM PRICE
[email protected] EA
5.39
A
O.COX
[email protected] EA
5.39
A
O.COX
[email protected] EA
5.88
A
O.VAX
[email protected] EA
6.49
A
O.AEX
KLEIN TOOLS NUT DRIVER
Cushion-Grip handle for greater torque and comfort. Full hollow shaft that
facilitates work on stacked circuit boards or other long bolt applications.
Internal flanges provide solid, twist-resistant shaft anchor. Premium chromeplated for smooth feel and corrosion resistance. Hex Size: 1/4-Inch; Overall
Length: 9-3/4-Inch; Shank Length: 6-Inch.
ITEM #
899372
www.wallacehardware.com
DESC
64614INS NUT DRIVER 1/4 INSULATED
CUSHION GRIP
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
28.99
A
CY.OZX
133
Hand & Power Tools
Screwdrivers and Nutdrivers, Nutdrivers,
Nutdrivers
Screwdrivers and Nutdrivers, Nutdrivers,
Nutdriver Sets
OLYMPIA TOOLS RATCHET NUT DRIVER
KLEIN TOOLS 4-PIECE NUT DRIVER SET
14-in-1 self adjusting ratchet driver replaces 14 SAE/Metric nut
drivers. Quick adjustable 3-position ratcheting. Quick
adjustable thumb button; adjustable socket tip. Fits metric and
SAE nut size: 5/16-Inch, 11/32-Inch, 13/32-Inch, 7/16-Inch, 15/32Inch, 1/2-Inch, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM.
3" hollow shafts make it possible to work on stacked
circuit boards or other long bolt applications. Patented
Tip-Ident? quickly identifies nut driver hex orientation
and size by color coding the handle ends so you can easily engage the nut
driver with the fastener. Cushion-Grip handles for superior torque and comfort.
Chrome-plated shafts help prevent corrosion. Internal flange provide solid,
twist-resistant shaft anchor. Set contains 1/4", 5/16", 3/8" and 9/16" drivers.
ITEM #
471240
384909
384917
384925
439878
DESC
76-408 SELF ADJUSTING TURBO DRIVER
630-5/16 NUT DRIVER CUSH GRIP 3IN 5/16IN
HEX
630-3/8 NUT DRIVER CUSH GRIP 3IN 3/8IN
HEX
630-1/2 NUT DRIVER CUSH GRIP 3IN 1/2IN
HEX
630-7/16 NUT DRIVER HOLLOW SHANK
7/16X3IN
SP UOM PRICE
[email protected] EA
21.93
A
CO.VLX
[email protected] EA
11.33
A
H.EZX
[email protected] EA
11.67
A
H.HAX
[email protected] EA
14.08
A
Y.OYX
[email protected] EA
13.18
A
A.HYX
Screwdrivers and Nutdrivers, Nutdrivers,
Nutdriver Sets
GREAT NECK NUT DRIVER SET
6-piece professional nut driver set, SAE. Color coded
handles. Ergonomic rubber gripped handles for
comfort. Plated finish to resist rust. Includes sizes:
3/16'', 1/4'', 5/16'', 11/32'', 3/8'', 7/16''.
ITEM #
329479
DESC
58764 NUT DRIVER SET 6-PC
SP
[email protected]
UOM
EA
A
PRICE
28.27
CR.HAX
ITEM #
384933
DESC
SP UOM
[email protected] ST
A
633 NUTDRIVER SET CUSHION GRIP 4PC
PRICE
47.61
OC.HVX
CHANNELLOCK 7PC PROFESSIONAL SAE
HOLLOW SHAFT NUT DRIVER SET
Made exclusively in the USA the Channellock ND-7A
Professional SAE Hollow Shaft Nut Driver set includes N316AB
3/16-inch x 3-1/4-inch Nut Driver, N140AB 1/4-inch x 3-1/4-inch
Nut Driver, N516AB 5/16-inch x 3-1/4-inch Nut Driver, N132AB
11/32-inch x 3-1/4-inch Nut Driver, N380AB 3/8-inch x 3-1/4-inch Nut Driver,
N716AB 7/16-inch x 4-inch Nut Driver, N120AB 1/2-inch x 4-inch Nut Driver and
features color coded handles for easy identification for auto, construction,
electrical, home repair, mechanical, and plumbing applications. Each
screwdriver features an acetate handle and a nickel chrome finish for
additional corrosion resistance.
ITEM #
537802
DESC
ND-7A SAE NUTDRIVER SET 7PC
SP
[email protected]
UOM
ST
A
PRICE
76.40
EH.VZX
KLEIN TOOLS 7-PIECE CUSHION-GRIP NUTDRIVER SET
Set Contains: 630-3/16, 630-1/4, 630-5/16, 630-11/32, 6303/8, 630-7/16, and 630-1/2. Color-coded handle end for quick
and easy identification. Standard length for most applications.
Fits over long bolts and studs. Klein offers a lifetime warranty
on material defects and workmanship for the normal life of the product.
ITEM #
384526
DESC
631 NUT DRIVER SET CUSHION GRIP 7PC
SP UOM
[email protected] ST
A
PRICE
79.66
EO.CZX
VERMONT AMERICAN 8 PC. 1/4" POWER
DRIVING SOCKET SET
Ideal for driving hex head screws, nuts and bolts. Most
popular 1/4" square drive sockets and socket adapter
for all-around nutdriving. Also used with Multi-Bit
screwdriver for hand driving applications. Contents:
3/16", 1/4", 9/32", 5/16", 11/32", 3/8", and 7/16". Display packaged.
ITEM #
371246
134
DESC
15524 NUTDRIVING SET 8PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
7.15
V.VLX
www.wallacehardware.com
Hand & Power Tools
Screwdrivers and Nutdrivers, Nutdrivers,
Nutdriver Sets
Tool Sets, Home and Shop Tool Sets,
Mechanics Tool Sets
APEX CRESCENT QUICK-CONVERT THANDLE NUT DRIVER SET
CRESCENT 128 PC MECHANIC'S TOOL
SET
Quick conversion design, simply pull shaft and rotate handle. Universal design
fits 6 fastener types (hex, square, 12-point, E-torx, partially rounded hex,
spline). Color coded for easy identification. Corrosion resistant, polished
chrome shafts. Dual material cushion grip holds up well against oil and grease
for comfortable non-slip grip. Includes 7 universal drivers: 3/16 in. (4.5 mm), 1/4
in. (6 mm), 5/16 in. (8 mm), 11/32 in. (9 mm), 3/8 in. (10 mm), 7/16 in. (11 mm), 1/2
in. (13 mm).
Set includes a 3/8-Inch quick release ratcheting drive
ratchet, 12 point sockets in SAE and Metric. 12 Combination wrenches in SAE
and Metric. 3/8-Inch drive, 3-Inch and 6-Inch extensions and 2 spark plug
sockets. All included in a durable and portable storage case.
ITEM #
538167
DESC
CNDS7V CRESCENT SET 7PC
SP
[email protected]
UOM
ST
A
ITEM #
144258
DESC
CRESCENT 170 PC MECHANIC'S TOOL
SETS
CRESCENT 70 PIECE MECHANICS TOOL SET
Includes a wide assortment of SAE and Metric tools for almost
any task. 1/4-inch and 3/8-inch quick-release ratcheting drives.
SAE and metric sockets and combination wrenches. Chrome
vanadium finish for durability and long-lasting good looks. Set
comes in a durable folding plastic storage case.
Wide selection of standard and deep sockets in the
most common SAE and metric sizes; meets stringent new ANSI and ASME
specifications. Includes: (3) ratchet drivers and extenders, (22) 1/4 inches
sockets, (23) 3/8 inches sockets, (10) 1/2 inches sockets, 8 inches adjustable
wrench, 10 inches tongue and groove pliers, 8 inches long nose pliers, (1)
magnetic bit driver and 40 assorted bits, (4) magnetic screwdrivers, (1) set of
metric and sae hex keys and a tri fold plastic carrying case.
ITEM #
210919
ITEM #
114065
APEX TOOL GROUP LLC
DESC
SP
[email protected]
UOM
ST
A
PRICE
149.13
CZL.HOX
Set features 72-tooth ratchet drives for a 5 degree
swing that's perfect for tight spaces. Convenient, quick-release button
operation and 3/8" drive 12-point sockets increase fastener contact area for
maximum torque. Durable storage case has raised-letter ID for each tool
location. Tools lock firmly in place and stay organized, even if the case gets
knocked around. All tools meet stringent new ANSI and ASME specifications
and come with a full satisfaction guarantee. Imported.
DESC
SP
UOM PRICE
122.59
A
YL.CHX
CTK148MP MECHANICS TOOL SET W/CASE [email protected] ST
SP UOM
[email protected] ST
A
PRICE
75.65
EH.RXZ
DESC
SP UOM PRICE
[email protected] ST
36.23
A
LA.XRX
CTK42 SCREWDRIVER SET RATCHETING
CRESCENT 42PC
STANLEY 170 PC MECHANIC'S TOOL SET
Includes 1/4", 3/8" and 1/2 drive tools. Quick release
ratchet for easy operation. Full polish chrome plating for anti-corrosion
protection and easy cleaning. Chrome Vanadium steel sockets and ratchets.
Metric and inch measurements. Folding case for easy storage. Includes: 1/2 in.
Drive: 72 tooth quick release drive 5 in. Extension Sockets: 1/2 in., 9/16 in., 3/4
in., 7/8 in., 15mm, 17mm, 18mm, 19mm, 21mm 3/8 in. Drive: 72 tooth quick
release dri
ITEM #
215570
www.wallacehardware.com
DESC
CTK70MP MECHANICS TOOL SET 70PC
QUICK CHANGEABLE SCREWDRIVER WITH TELESCOPIC
SHAFT, RATCHET FUNCTION, MAGNETIC BIT HOLDER,
ERGONOMIC FOR MAXIMUM COMFORT. ALL SOCKETS
AND BITS PERFECT FOR INDUSTRIAL APPLICATION. HANDY BLOW-MOLDED
CASE.
ITEM #
324817
CRESCENT 148 PC MECHANIC'S TOOL
SET
ITEM #
117145
PRICE
93.30
HC.LZX
PRICE
26.91
LX.OVX
Tool Sets, Home and Shop Tool Sets,
Mechanics Tool Sets
CTK170MP MECHANICS TOOLS SET
SP UOM
[email protected] ST
A
CTK128MP2 MECHANIC TOOL SET 128PC
DESC
96-011 MECHANIC TOOL SET 170PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
ST
A
PRICE
119.80
AY.YCX
135
Hand & Power Tools
Tool Sets, Home and Shop Tool Sets,
Mechanics Tool Sets
CRESCENT 30-PIECE 12 POINT
FRACTIONAL, METRIC, STANDARD AND
DEEP SOCKET SET WITH CASE
PORTER CABLE ROUTER
12 point sockets: 5/16", 7/16", 1/2", 9/16", 5/8", 11/16",
3/4", 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm,
19mm. 12 point deep sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 12mm, 13mm,
14mm, 16mm, 17mm. All tools meet stringent new ANSI and ASME
specifications. Durable plastic storage case.
ITEM #
390224
Routers and Router Bits, Routers, Fixed Base
Routers
DESC
SP UOM PRICE
CTK30SET TOOL SET PROFESSIONAL 30PC [email protected] ST
45.12
A
OV.LXZ
6.5 Amp AC/DC. 22,000 RPM. 1/4 inch collett. Precision
machined aluminum motor housing and base. Accurate
micrometer depth-to-cut adjustment. 100% sealed ball
bearings. Includes: 3-1/2 inch Router motor, Base #1001,
1/4 inch collet #42154, collet wrenches #42157, and
operating manual. 120 VAC, 25-60 Hz/ 120 VDC. 8-1/4 lbs. 7/8 peak
horsepower.
ITEM #
116416
DESC
100 ROUTER PORTER CABLE
SP
[email protected]
UOM
EA
A
PRICE
199.95
CHA.OLX
DEWALT 1-3/4 HP FIXED BASE ROUTER
1-3/4 HP (maximum motor HP), 11.0 Amp motor
provides the power to rout smoothly. Micro-fine depth
adjustment ring provides precise depth adjustments in
1/64" increments and adjusts vertically for a constant
switch/cordset location. Adjustable, tool-free steel
motor cam lock. Quick release motor latches for fast and easy motor pack
removal for bit and base changes. Detachable cordset. Sub-base concentricity
gauge included to ensure bit concentricity
CRESCENT 84 PIECE MECHANIC'S TOOL
SET
1/4 in. drive and 3/8 in. drive 6 and 12 point SAE/Metric.
72-tooth ratchet requires only a 5 degree swing. Large quick-release button
for easy operation. Sockets feature Surface Drive technology to virtually
eliminate fastener rounding. Chrome vanadium steel. Magnetic bit driver with
dual material grip for increased leverage.
ITEM #
394432
DESC
CTK84CMP MECHANIC'S TOOL SET SAE/MM
84PC
SP UOM PRICE
[email protected] ST
60.79
A
VE.ALX
Tool Sets, Home and Shop Tool Sets, Home
and Travel Tool Sets
GREAT NECK 99 PIECE HOME TOOL
CHEST SET
This set is a exceptional value. All the tools needed for
general household and automotive repairs neatly organized in a sturdy 4
drawer case. The set Includes: Pliers, Locking Pliers, Mini Pliers, Combination
Wrenches, Screwdrivers, Crimping Tool and Terminals, Sockets, Hex Keys,
Circuit Tester, Utility Knife, 3/8" Drive Ratchet, 1/4" and 3/8" Drive Sockets,
Socket Accessories, 1/4" Drive Spinner Handle, 21 Screwdriver Bits, and more.
ITEM #
512553
136
DESC
HM99 99PC TOOL CHEST
SP
[email protected]
UOM
EA
A
PRICE
147.56
AZ.CRX
ITEM #
293849
DESC
DW616K FIXED BASE ROUTER 1-3/4IN
SP UOM
[email protected] EA
A
PRICE
174.08
CEZ.VOX
BOSCH COLT PALM GRIP ROUTER KIT
Variable-speed palm-grip router kit; soft-start and quicklock systems. 5.6 amp motor with 15,000 - 35,000 rpm;
depth adjustment system and finger support pockets.
Aluminum construction and soft-grip. Includes palm
router, drop-forged collet and shaft wrenches, collet,
fixed base, straight-edge guide, case. 11.8 pounds; 1-year warranty.
ITEM #
377740
DESC
SP UOM PRICE
[email protected] EA
134.76
A
CLX.OLX
PR20EVSK PALM ROUTER KIT ELECTRONIC
VAR-SPEED
Routers and Router Bits, Router Bits and
Accessories, Router Bits
VERMONT AMERICAN C3 DYANITE BEVEL
TRIMMING BIT
Carbide Gold series. For fast smooth 22 degree bevel trim
cuts. Features a shielded compact ball bearing pilot. 1/4"
shank. 1-3/4" overall length.
ITEM #
380210
DESC
85420M BIT LAM 22 DEG BEVEL
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
27.95
CH.HXZ
www.wallacehardware.com
Hand & Power Tools
Routers and Router Bits, Router Bits and
Accessories, Router Bits
Routers and Router Bits, Router Bits and
Accessories, Router Bits
VERMONT AMERICAN COVE FILLET BITS
VERMONT AMERICAN STRAIGHT BITS
Silver series. 3/16 inch Cove and Fillet, 1/2 inch Bearing,
Double Flute, 3/16 inch Radius, 1/4 inch Shank, Carbide
Tip Router Bit, 2-1/8 inch Overall Length, Outer
Diameter = 1 inch , Cutting Length = 1/2 inch and Radius
= 3/16 inch.
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4"
shank diameter. 1/8" Overall Diameter, 5/16" Cutting Edge Length, 2" Overall
Length, 1 Flute.
ITEM #
302821
302910
23142 ROUTER BIT 3/16R COVE
DESC
SP
[email protected]
23143 ROUTER BIT 1/4R COVE
[email protected]
UOM
EA
A
EA
A
PRICE
28.40
CH.YEX
31.04
CY.RLX
ITEM #
301698
301728
301736
301744
301752
301760
301841
301884
VERMONT AMERICAN CARBIDE TIPPED
ROUNDOVER/BEADING BIT
Silver series. Bits made from a specially formulated grade of carbide that
produces superior durability and sharp cutting edges. Carbide tipped for longlasting performance. Heat treated shanks and bodies for added durability. Bits
available in 1/4" shank diameter. 5/8" Overall Diameter, 5/16" Cutting Edge, 2"
Overall Length, 1/2" Bearing Diameter, 1/16" Radius.
ITEM #
302511
302538
302589
302600
302619
302635
302643
302686
DESC
INFO
SP UOM PRICE
[email protected] EA
26.35
A
CR.RZX
[email protected] EA
26.59
DIAMETER
A
CR.YLX
23131 ROUTER BIT
7/8" OVERALL
[email protected] EA
27.25
3/16R 3/16R
DIAMETER
A
CH.CAX
23132 ROUTER BIT 1/4R 1" OVERALL DIAMETER [email protected] EA 27.97
A
CA.XEX
23133 ROUTER BIT
1-1/8" OVERALL
[email protected] EA
28.22
5/16R 5/16R
DIAMETER
A
CA.LCX
23134 ROUTER BIT 3/8R 1-1/4" OVERALL
[email protected] EA
28.63
DIAMETER
A
CH.YEX
23135 ROUTER BIT 1/2R 1-1/2" OVERALL
[email protected] EA
30.63
DIAMETER
A
CY.EAX
23136 ROUTER BIT
1-3/4" OVERALL
[email protected] EA
41.10
5/8R
DIAMETER
A
LR.CRX
23129 ROUTER BIT
5/8" OVERALL
1/16R 1/16R
DIAMETER
23130 ROUTER BIT 1/8R 3/4" OVERALL
301922
301981
INFO
1/8" OVERALL
DIAMETER
3/16" OVERALL
DIAMETER
1/4" OVERALL
DIAMETER
1/4" OVERALL
DIAMETER
5/16" OVERALL
DIAMETER
3/8" OVERALL
DIAMETER
1/2" OVERALL
DIAMETER
1/2" OVERALL
DIAMETER
5/8" OVERALL
DIAMETER
3/4" OVERALL
DIAMETER
SP UOM PRICE
[email protected] EA
13.43
A
A.VHX
[email protected] EA
15.79
A
CX.CYX
[email protected] EA
16.01
A
CX.XYX
[email protected] EA
15.63
A
Y.AXZ
[email protected] EA
15.90
A
CX.CLX
[email protected] EA
15.90
A
CX.CLX
[email protected] EA
16.82
A
CX.HXZ
[email protected] EA
20.16
A
CL.AOX
[email protected] EA
16.03
A
CX.LXZ
[email protected] EA
15.81
A
CX.CXZ
VERMONT AMERICAN CARBIDE TIPPED
1-1/32" OGEE BIT
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting performance. Heat treated
shanks and bodies. 1-1/32" overall diameter, 5/8" cutting edge, 1/4" shank
diameter, 1-7/8" overall length, 1/4" radius.
ITEM #
302457
DESC
23127 ROUTER BIT 1-1/32IN
SP
[email protected]
UOM
EA
A
PRICE
24.80
CE.RHX
VERMONT AMERICAN MORTISING BITS
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4" shank diameter. 1/2"
Overall Diameter, 1/2" Cutting Edge Length, 2" Overall Length.
ITEM #
302074
302082
302090
www.wallacehardware.com
DESC
23100 ROUTER BIT
1/8IN X 5/16
23101 ROUTER BIT
3/16IN X 1/2
23102 ROUTER BIT
1/4IN X 5/8
23103 ROUTER BIT 1/4IN
X 1IN
23104 ROUTER BIT
5/16IN X 1IN
23105 ROUTER BIT
3/8IN X 1IN
23106 ROUTER BIT
1/2IN X 1IN
23107 ROUTER BIT 1/2 X
1-1/4
23108 ROUTER BIT
5/8IN X 1IN
23109 ROUTER BIT
3/4IN X 1IN
DESC
23110 ROUTER BIT 1/2IN
X 1/2
23111 ROUTER BIT 5/8IN
X 1/2
23112 ROUTER BIT 3/4 X
25/32
1-800-776-0976 NOVEMBER
2016
INFO
1/2" OVERALL
DIAMETER
5/8" OVERALL
DIAMETER
3/4" OVERALL
DIAMETER
SP UOM PRICE
[email protected] EA
13.22
A
A.EVX
[email protected] EA
17.83
A
CZ.OEX
[email protected] EA
18.85
A
CL.XEX
137
Hand & Power Tools
Routers and Router Bits, Router Bits and
Accessories, Router Bits
Routers and Router Bits, Router Bits and
Accessories, Router Bits
VERMONT AMERICAN DOVETAIL BITS
VERMONT AMERICAN COREBOX BITS
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4"
shank diameter. 3/8" Outer Diameter, 3/8" Cutting Length, 1-3/4" Overall
Length, 9 Degree Angle.
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4"
shank diameter. 1/4" Outer Diameter, 3/8" Cutting Length, 1-9/16" Overall
Length, 1/8" Radius.
ITEM #
302139
ITEM #
302295
302201
302236
DESC
INFO
SP UOM PRICE
14.80
Y.ORX
11.41
H.LZX
18.86
CZ.YLX
23113 ROUTER BIT 3/8 3/8" OUTER DIAMETER [email protected] EA
X 9 DEG
A
23114 ROUTER BIT 1/2 X 1/2" OUTER DIAMETER [email protected] EA
15 DEG
A
23115 ROUTER BIT 9/16 9/16" OUTER DIAMETER [email protected] EA
X 7.5DG
A
302325
302333
302341
302430
DESC
23121 ROUTER BIT 1/4IN
1/4IN
23122 ROUTER BIT
3/8IN 3/8IN
23123 ROUTER BIT
1/2IN 1/2IN
23124 ROUTER BIT
5/8IN 5/8IN
23125 ROUTER BIT
3/4IN 3/4IN
INFO
SP UOM
1/4" OUTER DIAMETER [email protected] EA
A
3/8" OUTER DIAMETER [email protected] EA
A
1/2" OUTER DIAMETER [email protected] EA
A
5/8" OUTER DIAMETER [email protected] EA
A
3/4" OUTER DIAMETER [email protected] EA
A
PRICE
11.58
H.OLX
13.99
A.AVX
14.34
Y.LRX
21.06
CO.OCX
23.04
CV.ERX
VERMONT AMERICAN RABBETING BITS
Silver series is made from a specially formulated grade of
carbide that produces superior durability and sharp cutting
edges. Carbide tipped for long lasting performance. Heat
treated shanks and bodies. 23117 produces a rabbet width
of 3/8", 23118 produces a rabbet width of 1/2". 1/2" cutting
length, 1/2" shank diameter, 2-1/8" overall length, 1/2" bearing diameter. 1-1/4"
Outer Diameter.
ITEM #
302252
302260
DESC
23117 ROUTER BIT 3/8IN
X 1/2
23118 ROUTER BIT 1/2IN
X 1/2
INFO
1-1/4" OUTER
DIAMETER"
1-1/2" OUTER
DIAMETER"
SP UOM PRICE
[email protected] EA
27.00
A
CH.CYX
[email protected] EA
29.45
A
CA.HVX
VERMONT AMERICAN OVOLO BIT
Silver series is made from a specially formulated grade of
carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4" shank
diameter, 1" outer diameter, 9/16" cutting length, 1-13/16"
overall length, 1/4" radius.
ITEM #
302473
DESC
23128 ROUTER BIT 1/4IN 1/4IN
SP
[email protected]
VERMONT AMERICAN V-GROOVE
SURFACE FORMING BITS
VERMONT AMERICAN COVE BITS
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4" shank diameter. 7/16"
Outer Diameter, 9/16" Cutting Length, 1-25/32" Overall Length, 60 Degree
Angle.
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4"
shank diameter. 1" Outer Diameter, 1/2" Cutting Length,
2-1/8" Overall Length, 1/2" Bearing Diameter, 1/4" Radius.
ITEM #
302279
ITEM #
302724
302287
138
DESC
23119 ROUTER BIT
7/16X60 DEGREES
23120 ROUTER BIT 1/2
X 90 DEG
INFO
SP UOM
7/16" OUTER DIAMETER [email protected] EA
A
1/2" OUTER DIAMETER [email protected] EA
A
PRICE
15.92
CX.XRX
13.34
A.VOX
302759
DESC
INFO
23139 ROUTER BIT 1/4R 1" OUTER DIAMETER
COVE
23140 ROUTER BIT 3/8R 1-1/4" OUTER
COVE
DIAMETER
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
PRICE
18.74
CL.CXZ
SP UOM PRICE
[email protected] EA
25.10
A
CE.AHX
[email protected] EA
27.19
A
CH.OCX
www.wallacehardware.com
Hand & Power Tools
Routers and Router Bits, Router Bits and
Accessories, Router Bits
Routers and Router Bits, Router Bits and
Accessories, Router Bits
VERMONT AMERICAN OGEE BITS
VERMONT AMERICAN BULL NOSE BITS
Silver series is made from a specially formulated grade of
carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4" shank
diameter. 1-1/4" Outer Diameter, 1/2" Cutting Length, 21/8" Overall Length, 1/2" Bearing Diameter, 3/16" Radius.
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4"
shank diameter. 7/8" Outer Diameter, 3/4" Cutting Length, 2" Overall Length,
1/8" Radius.
ITEM #
302961
302988
DESC
23145 ROUTER BIT 3/16R
OGEE
23146 ROUTER BIT 1/4R
OGEE
INFO
1-1/4" OUTER
DIAMETER
1-1/2" OUTER
DIAMETER
SP UOM PRICE
[email protected] EA
33.09
A
LC.XRX
[email protected] EA
38.88
A
LV.EAX
ITEM #
303143
DESC
INFO
SP UOM PRICE
29.53
CA.RHX
23156 ROUTER BIT 1/8R 7/8" OUTER DIAMETER [email protected] EA
BULL
A
VERMONT AMERICAN CHAMFER BIT
VERMONT AMERICAN ROMAN OGEE BITS
Silver series is made from a specially formulated grade of
carbide that produces superior durability and sharp cutting
edges. Carbide tipped for long lasting performance. Heat
treated shanks and bodies. 1/4" shank diameter. 1-1/8" Outer
Diameter, 1/2" Cutting Length, 2-1/8" Overall Length, 1/2"
Bearing Diameter, 5/32" Radius.
ITEM #
303062
303070
DESC
23149 ROUTER BIT 5/32R
5/32R
23150 ROUTER BIT 1/4R
ROMAN
INFO
1-1/8" OUTER
DIAMETER
1-1/2" OUTER
DIAMETER
SP UOM PRICE
[email protected] EA
29.70
A
CA.YXZ
[email protected] EA
33.18
A
LC.CZX
VERMONT AMERICAN COVE AND BEAD
BITS
303097
DESC
INFO
23151 ROUTER BIT 1/8R 1" OUTER DIAMETER
COVE
23152 ROUTER BIT 3/16R 1-1/4" OUTER
COVE
DIAMETER
ITEM #
303127
DESC
23155 ROUTER BIT 45 DEG DEG
SP
[email protected]
UOM
EA
A
VERMONT AMERICAN CT FLUSH TRIM
BIT
SP UOM PRICE
[email protected] EA
32.85
A
LX.HZX
[email protected] EA
35.45
A
LZ.EHX
ITEM #
122564
DESC
SP UOM
[email protected] EA
A
23159 ROUTER BIT FLUSH TRIM 1/2IN X 1IN
Silver series is made from a specially formulated grade of
carbide that produces superior durability and sharp cutting
edges. Carbide tipped for long lasting performance. Heat
treated shanks and bodies. 1/4" shank diameter. 1-1/8"
Outer Diameter, 1/2" Cutting Length, 2-1/8" Overall Length,
1/2" Bearing Diameter, 1/8" Radius.
DESC
23153 ROUTER BIT
1/8R
INFO
1-1/8" OUTER DIAMETER
www.wallacehardware.com
PRICE
10.13
R.VAX
VERMONT AMERICAN CT FLUSH TRIM
BIT
Carbide tipped for lasting performance. 1/4" heat-treated shank. 9/16" cutting
length. 3/8" diameter bit. Bearing tip for smoother cuts.
ITEM #
122572
DESC
23160 ROUTER BIT TRIM 3/8IN X 9/16IN
SP
[email protected]
VERMONT AMERICAN CLASSICAL BITS
ITEM #
303100
PRICE
24.76
CE.YAX
Carbide tipped for lasting performance. 1/2" heat-treated shank. 1" cutting
length. 1/2" diameter bit. Bearing tip for smoother cuts.
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4"
shank diameter. 1" Outer Diameter, 15/32" Cutting Length, 2-1/8" Overall
Length, 1/2" Bearing Diameter, 1/8" Radius.
ITEM #
303089
Silver series is made from a specially formulated grade of
carbide that produces superior durability and sharp cutting
edges. Carbide tipped for long lasting performance. Heat
treated shanks and bodies. 1-3/8" outer diameter, 1/2"
cutting length, 1/4" shank diameter, 2-3/16" overall length,
1/2" bearing diameter, 45 degree angle.
UOM
EA
A
PRICE
8.25
E.LHX
VERMONT AMERICAN C-T 1" STRAIGHT
CUT BIT
Carbide tipped straight cut bit. 1/4" heat-treated shank. 1" cutting length. 1/2"
diameter.
SP UOM PRICE
[email protected] EA
35.45
A
LZ.EHX
ITEM #
122580
DESC
23161 ROUTER BIT STG 1/2 2 X 1IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
9.98
R.LYX
139
Hand & Power Tools
Routers and Router Bits, Router Bits and
Accessories, Router Bits
VERMONT AMERICAN C-T 1/4" PILOT
PANEL BIT
VERMONT AMERICAN COVE BITS
Carbide tipped pilot panel bit. 1/4" heat-treated shank. 3/4" cutting length.
Pilot points for easy starts.
ITEM #
122599
Routers and Router Bits, Router Bits and
Accessories, Router Bits
DESC
SP
[email protected]
23162 ROUTER BIT PILOT PANEL 1/4IN
UOM
EA
A
PRICE
10.60
R.HXZ
Silver series is made from a specially formulated grade
of carbide that produces superior durability and sharp
cutting edges. Carbide tipped for long lasting
performance. Heat treated shanks and bodies. 1/4"
shank diameter. 1-1/2" cove, 1/2" bearing, 2-7/16" overall length, double flute,
1/4" shank.
ITEM #
302813
DESC
23141 ROUTER BIT 1/2R COVE
SP
[email protected]
UOM
EA
A
PRICE
28.20
CH.YEX
UOM
EA
A
PRICE
33.32
LC.XRX
BOSCH PILOT PANEL BIT
Single flute pilot panel bit with drill-through point are
for window and door cutouts in abrasive materials,
plywood and paneling.
ITEM #
003042
85244 BOSCH PANEL PILOT BIT 1/4IN
DESC
SP
[email protected]
003158
85245 BOSCH PANEL PILOT BIT 3/8IN
[email protected]
010499
85246 BOSCH PANEL PILOT BIT 1/2IN
[email protected]
UOM
CD
A
CD
A
CD
A
PRICE
14.73
Y.LCX
15.25
Y.EOX
16.94
CX.EYX
VERMONT AMERICAN COVE FILLET BITS
Silver series.3/8 inch Cove and Fillet,1/2 inch Bearing,
Double Flute,3/8 inch Radius,1/4 inch Shank,Carbide Tip
Router Bit,25/16 inch Overall Length,Outer Diameter =
13/8 inch ,Cutting Length = 21/32 inch and Radius = 3/8
inch.
ITEM #
302937
VERMONT AMERICAN CARBIDE TIPPED
SILVER SERIES KEYHOLE BIT
DESC
23144 ROUTER BIT 3/8R COVE
SP
[email protected]
For making keyhole slots for picture frames, shelves,
mirrors, cabinets, support fixtures and other wall
hangings.
ITEM #
302244
DESC
23116 ROUTER BIT 3/8IN 3/8IN
SP
[email protected]
UOM
EA
A
PRICE
15.02
Y.VHX
VERMONT AMERICAN 6 PC ROUTER BIT
SET
This 6 pc set includes the following:1/4 in., 3/8 in., 1/2 in. Straight, 3/8 in.
roundover, 5/32" Roman Ogee, 1/4 in. Corebox--1 hex key and one 1/2 in.
replacement bearing.
VERMONT AMERICAN CARBIDE TIPPED
SILVER SERIES EDGEBEAD BITS
ITEM #
458007
DESC
23000 ROUTER BIT SET 6PC
SP
[email protected]
1/2".
ITEM #
302449
DESC
23126 ROUTER BIT 1/2IN 1/2IN
SP
[email protected]
UOM
EA
A
PRICE
22.95
CV.RXZ
VERMONT AMERICAN BIT
REPLACEMENT BALL BEARING
3/16".
Precision ball bearings. Prevents burning and marring.
Precision engineered. Fits all Ball Bearing Router bits.
140
DESC
23138 ROUTER BIT 3/16IN 3/16IN
SP
[email protected]
UOM
EA
A
PRICE
32.20
LX.OEX
PRICE
57.12
OR.OEX
Routers and Router Bits, Router Bits and
Accessories, Bit Ball Bearings
VERMONT AMERICAN CARBIDE TIPPED
SILVER SERIES EDGEBEAD BITS
ITEM #
302716
UOM
ST
A
ITEM #
303259
DESC
23165 REPLACEMENT PARTS BB SET
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
PG
A
PRICE
15.27
Y.REX
www.wallacehardware.com
Hand & Power Tools
Routers and Router Bits, Router Bits and
Accessories, Biscuits
VERMONT AMERICAN BISCUITS
SKIL/BOSCH 21 2.5-AMP MULTI-X
OSCILLATING TOOL KIT
For joints where strength is critical. Made from compressed
hardwood. Biscuits swell in joints for maximum strength. 50 per
bag.
ITEM #
387428
17-141 NO.0 GAUGE BISCUITS
DESC
SP
[email protected]
387436
17-142 NO.10 GAUGE BISCUITS
[email protected]
353892
17-143 BISCUITS NO.20 50/BAG
[email protected]
UOM
BG
A
BG
A
BG
A
Rotary Tools and Accessories, Rotary Tools
and Saws, Oscillating Tools
PRICE
6.19
O.AEX
6.19
O.HAX
6.19
O.HAX
2.5-amp tool has ample power for heavier applications.
Variable-speed dial for matching speed to application and material. Constant
electronics circuitry maintains speed under load. Durable accessory holder
make it easy to change and position accessories using Allen wrench. Small
enough to reach into corners and other tight spaces.
ITEM #
377619
DESC
GOP40-30B OSCILLATING MULTI-TOOL
KIT
SP UOM PRICE
[email protected] EA
201.78
A
CAX.CRX
Rotary Tools and Accessories, Rotary Tools
and Saws, Rotary Tools
DREMEL UNIVERSAL ADAPTER
DREMEL CORDLESS ROTARY KIT
W/CASE
7.2V. Two speeds, 10,000 and 20,000 rpm to match
proper speed required. Removable battery pack. 3 hour charger with LED light
shows proper charging. compact and lightweight. Includes 15 genuine Dremel
accessories.
ITEM #
014494
DESC
SP
[email protected]
7700-1/15 ROTARY KIT W/CASE
UOM
KT
A
PRICE
48.91
VO.RHX
The Multi-Max Universal Adapter allows the owners of
other oscillating tool brands to use genuine Dremel
brand oscillating accessories on their oscillating tool.
Allows Multi-Max accessories (excluding Multi-Flex?) to
fit all current oscillating tools from Fein?, Rockwell?,
Bosch?, Craftsman?, Ridgid?, and more.
ITEM #
037249
DESC
MM300 ADAPTER UNIVERSAL DREMEL
SP
[email protected]
UOM
EA
A
PRICE
1.08
X.RAX
DREMEL ROTARY KIT W/CASE
Variable speed from 5,000 to 35,000 rpm. Lightweight
design for comfort during prolonged use. Comfort grip
housing for easier handling and better tool control.
"Dovetail" feature for Dremel-exclusive attachments.
Click-and-set on/off switch allows precise speed selection. 24 attachments.
ITEM #
037230
DESC
3000-1/24 MULTI ROTARY KIT W/ CUTTER &
ACCESS
SP UOM PRICE
[email protected] KT
75.87
A
RH.HVX
Rotary Tools and Accessories, Rotary Tools
and Saws, Engravers
DREMEL ELECTRIC ENGRAVER
DESC
290-01 ENGRAVER
www.wallacehardware.com
Double-sided, short offset blade for flush cuts. For use at any
speed. Cutting width/depth: 1-3/4" x 1-3/8". High Speed Steel.
ITEM #
456152
700000 OSCILLATING UNIV OFFSET SHORT
456160
700001 OSCILLATING UNIV OFFSET MEDIUM
456217
700002 OSCILLATING UNIV OFFSET WIDE
DUO
710000 OSCILLATING JAPAN OFFSET SHORT
456225
7200 strokes per minute. 115V. Carbide point. Stroke
adjustment dial. Clam Shell. Includes a replaceable carbide
steel engraver point.
ITEM #
304174
SPYDER DOUBLE SIDED OSCILLATING BLADE
SP
[email protected]
UOM
EA
A
456306
720000 OSCILLATING SCRAPER OFFSET
RIGID
720001 OSCILLATING SCRAPER FLEXIBLE
456322
730000 OSCILLATING GROUT FLAT CARBIDE
456349
740000 OSCILLATING RASP NONAGON
CARBIDE
456233
PRICE
19.05
CH.XCX
DESC
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
20.79
A
CO.ARX
[email protected] EA
20.79
A
CO.ARX
[email protected] EA
25.98
A
CH.OLX
[email protected] EA
20.79
A
CO.ARX
[email protected] EA
13.50
A
Y.XZZ
[email protected] EA
13.50
A
Y.XZZ
[email protected] EA
31.18
A
LX.HYX
[email protected] EA
26.00
A
CH.OZX
141
Hand & Power Tools
Rotary Tools and Accessories, Rotary Tools
and Saws, Oscillating Tools
ROCKWELL SONICRAFTER OSCILLATION
MULTI-TOOL WITH HYPERLOCK
ROTOZIP SABRE CUT ZIP BIT
Includes: (1) 4.0 amp Sonicrafter Multi-tool, (1) Sanding
Pad, (26) Sanding Sheets, (4) 1-3/8" Standard Wood End
Cut Blade, (1) 3-1/8" HSS Semicircle Saw Blade, (1) Rigid Scraper Blade and (1)
Rockwell Hard Carrying Case.
ITEM #
111577
DESC
SP UOM PRICE
[email protected] EA
157.39
A
CLE.YCX
RK5141K F50 SONICRAFTER OSCILLATING
TOOL
32-Piece. Hyperlock tool-free blade holding system offers 1 ton of holding
force for quick and reliable blade changes. Universal fit system holds all major
brands of blades. Variable speed (11,000 to 20,000-OPM) offers maximum
control across a variety of applications. Powerful 3.5-amp motor maintains
speed of cut under load. 10-ft cord minimizes the need for extension cords. 4
degree oscillation angle.
DESC
RK5132K OSCILLATING MULTI-TOOL
SP
[email protected]
1/8 inch sabre cut wood bit. For a reliable sabre cut in wood or fiberglass. For
RotoZip rotary tools. 4 bits per pack.
ITEM #
137731
SC4 BIT ZIP SABRECUT 1/8IN
DESC
SP
[email protected]
261637
TC1 BIT ZIP TILECUT 1/8IN 1PK
[email protected]
UOM
PG
A
EA
A
PRICE
9.16
E.HZX
8.56
E.OYX
ROTO ZIP GUIDE POINT STEEL
DRYWALL ZIP BIT
ROCKWELL SONICRAFTER OSCILLATING
TOOL KIT
ITEM #
111590
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Cutting Bits
UOM
EA
A
PRICE
109.32
AH.VEX
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Collets and Mandrels
Zip bits cleanly slice through virtually any commonly used building material up
to 1" thick. Cuts drywall with a guidpoint end that follows around, instead of
cutting through, an obstacle like an outlet box.
ITEM #
137812
DESC
SP
[email protected]
GP8 ZIP GUIDE POINT BIT 1/8IN
UOM
PG
A
PRICE
11.36
H.CEX
ROTO ZIP OUTLET STEEL ZIP BIT
Zip bits cleanly slice through virtually any commonly used building material up
to 1" thick. This is the original zip bit designed for slower, more controlled cuts
in drywall.
ITEM #
137804
DESC
SP
[email protected]
ZB8 BIT ZIP OUTLET 1/8IN 8PC
UOM
PG
A
PRICE
10.55
R.RVX
DREMEL COLLET
Collet for Moto-Tools Nos. 245 , 250, Series 3 and
later; 260; 270; 280, Series 2 and later; Nos. 275, 285, 370, 380 & 395; MotoFlex Tools 232 & 332; Chainsaver tools 241 & 246; Nos. 225 & 90199 Flexible
Shaft Attachments.
ITEM #
362565
DESC
SP
[email protected]
480 COLLET 1/8IN
UOM
EA
A
PRICE
2.93
C.AEX
ROTO ZIP DURACUT CARBIDE ZIP BIT
Zip bits cleanly slice through virtually any commonly used building material up
to 1" thick. For long, fast, lateral cuts through: Cement board, plaster and
stucco.
ITEM #
137782
DESC
XB-DC1 BIT ZIP DURACUT 1/4IN
SP
[email protected]
UOM
PG
A
PRICE
18.44
CZ.RXZ
DREMEL MANDREL
Use with 409, 411, 412, 413, 420, 423E, 425, 426, 429, 456, EZ471SA,
EZ472SA, EZ473SA, 511E, 512E, 540 and 541.
ITEM #
362255
142
DESC
402 MANDREL
SP
[email protected]
UOM
EA
A
PRICE
2.96
C.ARX
DREMEL MULTI-PURPOSE CUTTING BIT
Cuts hardwood up to 3/8 inch and softwood up to 5/8 inches. Also cuts plastic,
fiberglass, drywall, laminate, aluminum and vinyl siding. 1/8 inch shank.
ITEM #
096024
DESC
561CUTTING BIT 1/8X1/8IN MULT-PURPOSE
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
4.64
L.YLX
www.wallacehardware.com
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Cutting Bits
DREMEL DRYWALL CUTTING BIT
DREMEL TUNGSTEN CARBIDE CUTTER
BIT
Gives fast clean cuts in drywall. 1/8 inch shank.
ITEM #
309680
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Cutters
DESC
SP UOM
[email protected] EA
A
560 DRYWALL CUTTING BIT 1/8IN X 1/8IN
PRICE
3.45
L.CHX
Use for shaping, smoothing and material removal. Use on hardened steel,
stainless steel, cast iron, nonferrous metals, fired ceramics, plastics,
hardwoods and other hard materials. Not for use with floor tile.
ITEM #
096040
DESC
9901 CUTTER CARBIDE TUNGSTEN
SP
[email protected]
DREMEL DIAMOND POINT TAPER BIT
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use
on jade, ceramic, glass, hardened steel, semi-precious stones and other hard
materials. Bits are covered with diamond particles. Bit diameter-5/64". Shank
diameter-3/32".
ITEM #
309699
DESC
SP UOM
[email protected] EA
A
7134 DIAMOND TAPER POINT BIT 3/32IN
PRICE
6.68
V.LXZ
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Cutters
UOM
EA
A
DREMEL TUNGSTEN CARBIDE CUTTER
BIT
Use for shaping, smoothing and material removal. Use on hardened steel,
stainless steel, cast iron, nonferrous metals, fired ceramics, plastics,
hardwoods and other hard materials. Not for use with floor tile.
ITEM #
309702
DESC
9903 CUTTER CARBIDE TUNGSTEN
SP
[email protected]
UOM
EA
A
DREMEL 1/32" ENGRAVING CUTTER, 3/32"
SHANK
DREMEL ENGRAVING CUTTER, 1/16"X3/32"
SHANK
A high-speed cutter designed for precision engraving. Ideal for
detail engraving, carving and routing in wood, fiberglass,
ceramics, plastic, jewelry and soft metals. 2 Pack.
For detail engraving, carving and routing. For wood, fiberglass,
plastic and soft materials. Not for use with hardened materials.
Use higher speeds for hard woods, slower speeds for metals. 2
pack.
ITEM #
439452
DESC
105-2PK ENGRAVING CUTTER 1/32X3/32IN
2PACK
SP UOM PRICE
[email protected] PG
4.39
A
L.HRX
DREMEL 1/16" BALL ENGRAVING
CUTTER
High speed cutter designed for precision engraving. Ideal for detail engraving,
carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft
metals. 1/16" point x 3/32" shank. One pack.
ITEM #
362107
DESC
113 ENGRAVING CUTER 1/16INX3/32IN 1PK
SP UOM
[email protected] EA
A
PRICE
1.88
C.AEX
DREMEL HIGH SPEED CUTTER
Made of high quality steel. All have 1/8" shanks. Can be
used for shaping and hollowing most metals, plastics and woods. 3/8".
ITEM #
362220
DESC
199 HIGH SPEED CUTTER
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
5.89
O.HCX
PRICE
11.00
R.YLX
ITEM #
439460
DESC
106-2PK ENGRAVING CUTTER 1/16X3/32IN
SP UOM
[email protected] CD
A
PRICE
11.00
R.YLX
PRICE
4.39
L.HRX
DREMEL 5/16" CARVING/ENGRAVING
CUTTER, 1/8" SHANK
High speed cutters can be used for shaping, hollowing, grooving, slotting,
making tapered holes in soft metals, plastics, and wood. 2 Pack.
ITEM #
439479
DESC
115-2PK ENGRAVING CUTTER 5/16X1/8IN
2PACK
SP UOM PRICE
[email protected] PG
8.74
A
E.EXZ
DREMEL 1/4" CARVING/ENGRAVING
CUTTER, 1/8" SHANK
High speed cutters can be used for shaping, hollowing, grooving, slotting,
making tapered holes in soft metals, plastics, and wood. 2 Pack.
ITEM #
439495
DESC
125-2PK ENGRAVING CUTTER 1/4INX1/8IN
2PACK
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
8.74
A
E.EXZ
143
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Cutters
DREMEL 3/16" CARVING/ENGRAVING
CUTTER, 1/8" SHANK
DREMEL GRINDING STONE
High speed cutters can be used for shaping, hollowing, grooving, slotting,
making tapered holes in soft metals, plastics, and wood. 2 Pack.
ITEM #
439509
DESC
SP UOM PRICE
[email protected] PG
8.80
A
E.EXZ
192-2PK ENGRAVING CUTTER 3/16X1/8IN
2PACK
DREMEL 1/8" CARVING/ENGRAVING
CUTTER, 1/8" SHANK
DESC
194-2PK HI SPEED CUTTER 1/8IN 2PACK
Aluminum oxide for ferrous metals. Use on metals,
castings, welded joints, rivets and rust. Ideal for sharpening, de-burring and
general purpose grinding of most materials. 1/8 inch shank. Orange/Brown.
ITEM #
362778
DESC
8193 GRINDING STONE 5/8X1/8
ALUMINUM OXIDE
INFO
SP UOM PRICE
5/8" X 1/8""" [email protected] EA
2.93
A
C.AEX
DREMEL GRINDING STONE
High speed cutters can be used for shaping, hollowing, grooving, slotting,
making tapered holes in soft metals, plastics, and wood. 2 Pack.
ITEM #
439517
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Grinding Stones
SP
[email protected]
UOM
PG
A
PRICE
8.80
E.EXZ
DREMEL 7/32" CARVING/ENGRAVING
CUTTER, 1/8" SHANK
Aluminum oxide for ferrous metals. Use on metals,
castings, welded joints, rivets and rust. Ideal for
sharpening, de-burring and general purpose grinding of most materials. 1/8
inch shank. Orange/Brown.
ITEM #
362816
DESC
8215 GRINDING STONE 1X1/8IN ALUMINUM
OXIDE
SP UOM PRICE
[email protected] EA
2.93
A
C.AEX
High speed cutters can be used for shaping, hollowing, grooving, slotting,
making tapered holes in soft metals, plastics, and wood. 2 Pack.
DREMEL SILICON CARBIDE GRINDING
STONES
ITEM #
439525
For nonferrous materials. Designed to work well on stone, glass, ceramics,
porcelain and nonferrous materials 1/8 inch shank. Blue/Green.
DESC
196-2PK HI SPEED CUTTER 1/8IN 2PACK
SP
[email protected]
UOM
PG
A
PRICE
8.80
E.EXZ
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Grinding Stones
DREMEL GRINDING STONE
Aluminum oxide for ferrous metals. Use on metals, castings, welded joints,
rivets and rust. Ideal for sharpening, de-burring and general purpose grinding
of most materials. 1/8 inch shank. Orange/Brown.
ITEM #
362670
DESC
932 GRINDING STONE OXIDE ALUMINUM
SP UOM
[email protected] EA
A
PRICE
2.96
C.ARX
DREMEL GRINDING STONE
Aluminum oxide for ferrous metals. Use on metals, castings, welded joints,
rivets and rust. Ideal for sharpening, de-burring and general purpose grinding
of most materials. 1/8 inch shank. Orange/Brown.
ITEM #
362697
144
DESC
952 STONE GRINDING OXIDE ALUM
SP
[email protected]
UOM
EA
A
PRICE
2.96
C.ARX
ITEM #
362832
DESC
83322 GRINDING STONE 1/8X1/8 SILICON
CARBIDE
SP UOM PRICE
[email protected] EA
2.93
A
C.AEX
DREMEL SILICON CARBIDE GRINDING
STONES
For nonferrous materials. Designed to work well on stone, glass, ceramics,
porcelain and nonferrous materials 1/8 inch shank. Blue/Green.
ITEM #
362875
DESC
85422 GRINDING STONE 1/8 X25/32 SILICON
CARBIDE
SP UOM PRICE
[email protected] EA
2.93
A
C.AEX
DREMEL CHAIN SAW SHARPENING
STONE
Precision ground for quick, easy sharpening of chain saw blades. Each
package contains 2 stones.
ITEM #
095826
DESC
SP
UOM PRICE
5.32
A
O.OZX
454 CHAIN SAW SHARPENING 3/16IN X 1/8IN [email protected] EA
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Grinding Stones
DREMEL CHAIN SAW SHARPENING
STONE
VERMONT AMERICAN GRINDING POINTS
Precision ground for quick, easy sharpening of chain saw blades. Each
package contains 2 stones.
ITEM #
095745
513334
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Grinding Stones
DESC
SP UOM PRICE
5.33
O.ORX
5.29
O.OZX
453 CHAIN SAW SHARPENING STONE 5/32IN X [email protected] EA
1/8IN
A
455 CHAIN SAW SHARPENING STONE 7/32IN X [email protected] EA
1/8IN
A
For use with all electric drills. Made of aluminum oxide
abrasive in a vitrified bond for fast cutting. Grinding points are
mounted on 1/4" plated steel shanks. Individual self-selling
display card. 1-1/4" x 1/4".
ITEM #
323489
DESC
SP
[email protected]
16706 GRIND POINT POINTED EDGE
UOM
CD
A
PRICE
3.39
L.CZX
VERMONT AMERICAN ROUND BALL GRINDING
POINT
For grinding and shaping metal. Aluminum oxide for fast metal
removal. 1/4" shank fits die grinder and all drills. 3/4" diameter
thickness.
ITEM #
323497
DESC
16708 ROUND BALL GRIND POINT
SP
[email protected]
VERMONT AMERICAN GRINDING POINTS
UOM
EA
A
PRICE
3.39
L.CZX
For use with all electric drills. Made of aluminum oxide abrasive in a
vitrified bond for fast cutting. Grinding points are mounted on 1/4"
plated steel shanks. Individual self-selling display card. 3/4" x 1-1/4" .
ITEM #
323500
VERMONT AMERICAN GRINDING POINTS
DESC
16710 GRIND POINT-CYLINDER
SP
[email protected]
UOM
CD
A
PRICE
3.29
L.XLX
For use with all electric drills. Made of aluminum oxide abrasive in a
vitrified bond for fast cutting. Grinding points are mounted on 1/4"
plated steel shanks. Individual self-selling display card. 3/4" x 1-1/8"
ITEM #
323454
DESC
16701 GRIND POINT RD PT TREE
SP
[email protected]
UOM
CD
A
PRICE
3.29
L.XLX
VERMONT AMERICAN GRINDING POINTS
For use with all electric drills. Made of aluminum oxide abrasive in a
vitrified bond for fast cutting. Grinding points are mounted on 1/4"
plated steel shanks. Individual self-selling display card. 11/16" x 1-1/4"
ITEM #
323462
DESC
16702 GRIND POINT POINTED TREE
SP
[email protected]
UOM
CD
A
DESC
www.wallacehardware.com
SP
[email protected]
UOM
CD
A
ITEM #
323519
DESC
16711 GRIND POINT-WHEEL
SP
[email protected]
UOM
CD
A
PRICE
3.39
L.CZX
DREMEL GRINDING STONE
For use with all electric drills. Made of aluminum oxide abrasive in a
vitrified bond for fast cutting. Grinding points are mounted on 1/4"
plated steel shanks. Individual self-selling display card. 11/16" x 7/8"
16703 GRIND POINT PT CYLINDER
For use with all electric drills. Made of aluminum oxide abrasive in
a vitrified bond for fast cutting. Grinding points are mounted on
1/4" plated steel shanks. Individual self-selling display card. 1" x
3/8".
PRICE
3.39
L.XYX
VERMONT AMERICAN GRINDING POINTS
ITEM #
323470
VERMONT AMERICAN GRINDING POINTS
Aluminum oxide for ferrous metals. Use on metals, castings, welded joints,
rivets and rust. Ideal for sharpening, de-burring and general purpose grinding
of most materials. 1/8 inch shank. Orange/Brown.
PRICE
3.39
L.CZX
ITEM #
439533
DESC
953-2PK GRINDING STONE ALUMINUM OXIDE
2PACK
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
4.39
A
L.HRX
145
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Sanders
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Polishers
DREMEL SANDING FLAPWHEEL
DREMEL FELT POLISHING TIP
Flapwheels grind and polish flat or contoured surfaces.
They are used most effectively as a finishing sander
after heavier surface sanding and material removal is
complete.
3/8" diameter. Ideal for polishing in corners and hardto-get-at places. Fits Mandrel No. 401.
ITEM #
309656
DESC
ITEM #
362433
For rough shaping and smoothing wood and fiberglass,
removing rust from metal surfaces, shaping rubber surfaces. Sander bands are
easily replaceable on drums.
563684
SP
[email protected]
UOM
EA
A
SP UOM PRICE
[email protected] EA
7.24
A
V.EZX
504 SANDER FLAPWHEEL 3/16IN X 1/8IN
80GRIT
DREMEL SANDING BANDS
ITEM #
362263
DESC
422 POLISHING TIP 3/8IN
DESC
SP UOM PRICE
[email protected] EA
4.01
A
L.ELX
430 DRUM SANDING MANDREL 1/4IN- COARSE [email protected] EA 3.96
A
L.EXZ
407 DRUM SANDER 1/2IN
PRICE
2.98
C.AZX
DREMEL POLISHING WHEEL
Polishing wheel is impregnated with a silicon carbide abrasive and lubricant,
eliminating the need for a polishing compound. Designed for light stock
removal and high luster polishing. Works on a variety of surfaces such as steel,
aluminum, brass, silver, hard plastics, gold and other metals.
ITEM #
309664
DESC
SP
[email protected]
520 POLISHING WHEEL 1IN X 1/8IN
UOM
EA
A
PRICE
2.32
L.LAX
DREMEL SANDING BANDS
For rough shaping and smoothing wood and fiberglass,
removing rust from metal surfaces, shaping rubber
surfaces. Sander bands are easily replaceable on
drums.
ITEM #
362298
362522
563692
563706
DESC
408 SANDER BANDSCOARSE 1/2IN 60 GRIT
432 FINE SANDING BANDS
1/2IN 120 GRIT
431 COARSE SANDING
BANDS 1/4IN 60 GRIT
438 FINE SANDING BANDS
1/4IN 120 GRIT
INFO
1/2" DIA. SANDER
BAND
1/2" DIA. SANDER
BAND
1/4" DIA. SANDER
BAND
1/4" DIA. SANDER
BAND
DREMEL FELT POLISHING WHEELS
Fits Mandrel No. 401. Ideal for polishing large areas.
SP UOM PRICE
[email protected] PG
2.96
A
C.ARX
[email protected] PG
2.96
A
C.ARX
[email protected] PG
2.96
A
C.ARX
[email protected] PG
2.96
A
C.ARX
ITEM #
362514
DESC
429 FELT POLISHING WHEEL 1IN
SP
[email protected]
DREMEL POLISHING COMPOUND
Flapwheels grind and polish flat or contoured surfaces. They
are used most effectively as a finishing sander after heavier
surface sanding and material removal is complete.
Used to remove dull oxidized film and light imperfections
on metals and plastics. Apply with cloth or felt polishing
accessories and nylon bristle brushes.
ITEM #
303666
ITEM #
309648
146
DESC
SP UOM PRICE
[email protected] EA
7.24
A
V.EZX
PRICE
2.98
C.AZX
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Polishing Compound
DREMEL SANDING FLAPWHEEL
502 SANDER FLAPWHEEL 3/8IN X 1/8IN
80GRIT
UOM
EA
A
DESC
421 POLISHING COMPOUND
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
2.98
C.AZX
www.wallacehardware.com
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Shaping Wheels
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Cut-Off Wheels
DREMEL CUT/SHAPE CARBIDE WHEEL
DREMEL CUT-OFF WHEEL
Ideal for cutting, grooving and trimming all kinds of
materials including metal, wood, fiberglass, plastics
and ceramics. Can be used to cut screws and rusted
bolts, make slots in screw heads, trim castings and
more.
Cut-off, groove and trim metals, woods and ceramics.
Use with Mandrel 402. Dimensions: 1-1/4" diameter x
1/16" thick.
ITEM #
309672
DESC
SP UOM PRICE
[email protected] EA
13.39
A
CO.CHX
543 CARBIDE CUTTING/ SHAPING WHEEL 11/4IN
ITEM #
095966
DESC
540 CUTOFF WHEEL 1-1/4IN X 1/8IN
SP
[email protected]
UOM
PG
A
PRICE
4.61
L.YXZ
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Cut-Off Wheels
DREMEL WOOD & PLASTIC CARBIDE
WHEEL
DREMEL CUT-OFF WHEEL
Emery wheel for slicing and cutting off metal, plastic,
15/16" diameter, .025 in. thick. 36 per vial.
ITEM #
362301
DESC
409 CUT OFF WHEEL .025
SP
[email protected]
UOM
PG
A
PRICE
6.18
O.AYX
DREMEL HEAVY-DUTY CUT-OFF WHEEL
Emery, heavy duty, 15/16" diameter, .04" thick. 36 per vial. Use with mandrel
402. Makes it easy to cut or slot bolts and screws. Use on sheet metal, thin
wood and plastic. Cuts only along its edge.
ITEM #
563668
DESC
420 CUT OFF WHEEL HEAVY DUTY
SP
[email protected]
UOM
PG
A
PRICE
6.70
V.LZX
Wheel is not designed to cut materials like tile and
metal. Can cut hard and soft wood, plywood,
composites, and laminate flooring. Can also cut
drywall, PVC, and plastic. Up to 3/4-Inch Depth of Cut3-Inch cutting wheels to power through up to 3/4-Inch oak. Two-type cutting
wheel: traditional flat wheel and a domed flush cut wheel. Cutting guides that
help cutting common household materials.
ITEM #
470759
DESC
SM500 CARBIDE WHEEL MULTI-PURPOSE
SP UOM
[email protected] EA
A
PRICE
10.69
R.RAX
DREMEL/SKIL METAL CUTTING WHEEL
Cuts a wide range of metals - both ferrous and
nonferrous - including copper pipe, conduit, coated
wire shelving, thin sheet metal, threaded rod, sheet
aluminum and more. 3.5 inch diameter wheel.
ITEM #
334567
DESC
US510-01 METAL CUTTING WHEEL 3.5 IN
DIAMETER
SP UOM PRICE
[email protected] EA
1.36
A
C.LZX
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Brushes
DREMEL FIBERGLASS CUT-OFF WHEELS
DREMEL CARBON STEEL BRUSHES
Fiberglass reinforced, 1-1/4" diameter, .045 in. thick. 36
per vial.
ITEM #
362484
DESC
426 CUT OFF WHEEL FIBERGLASS
www.wallacehardware.com
SP
[email protected]
Versatile brush for removing rust and corrosion, polish
metal surfaces. De-burr and blend surface junctures, clean electrical
components.
UOM
PG
A
PRICE
8.96
E.RVX
ITEM #
362549
DESC
INFO SP UOM PRICE
2.96
A
C.ARX
443 CARBON STEEL BRUSH 1/8IN X 1/8IN 1/8"" [email protected] EA
1-800-776-0976 NOVEMBER
2016
147
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Brushes
DREMEL BRISTLE BRUSH
SPYDER NYLON BRUSH RECIPROCATING SAW
ATTACHMENT
Use for light de-burring, cleaning, polishing of
silverware, jewelry and other precious metals. Can be
used with polishing compound.
ITEM #
563676
362530
362506
DESC
Durable nylon brush. Tough cleaning power. Won't scratch
surfaces. Use on grout, carpet, tile, & more. Gets rid of stubborn
layers of grime.
403-02 3/4 IN NYLON BRISTLE BRUSH
[email protected] EA
(2PK)
A
442 CARBON STEEL BRUSH 1/2IN X 1/8IN 1/2"" [email protected] EA
ITEM #
456853
INFO SP UOM PRICE
5.37
O.ORX
2.96
A
C.ARX
428 CLEANING/POLISHING BRUSH 3/4IN 3/4"" [email protected] EA 2.96
A
C.ARX
DREMEL STAINLESS STEEL BRUSHES
Stainless steel brushes do not cause 'after-rust' when
used on stainless steel or other corrosive-resistant
materials. Use it on pewter, aluminum, stainless steel and other materials. 3/4"
x 1/8".
ITEM #
095850
DESC
SP
UOM
530 STAINLESS STEEL BRUSH 3/4IN X 1/8IN [email protected] EA
A
PRICE
3.90
L.VEX
DREMEL BRASS BRUSHES
DESC
SP UOM PRICE
[email protected] EA
3.85
A
L.VOX
535 BRASS WHEEL SHAPE BRUSH 3/4IN X
1/8IN
Includes 3 sheets of sandpaper.
DESC
500010 SANDER W/ 3 SHEETS SANDPAPER
SP UOM
[email protected] EA
A
Nonagon-shaped hook-and-loop sandpaper. Includes 4
x 40 grit, 4 x 80 grit, 4 x 120 grit, 4 x 180 grit and 4 x 240 grit. Size: 3-1/8" x 31/8". Silicon Carbide.
ITEM #
457043
148
DESC
750001 OSCILLATING PAD NON ASST PAPER
20PC
SP UOM PRICE
[email protected] PG
18.71
A
CL.VHX
SKIL GENERAL PURPOSE ROTARY TOOL
BIT SET
SP
[email protected]
UOM
EA
A
DESC
687 SET BIT 52PC GENERAL PURPOSE
SP
[email protected]
UOM
EA
A
PRICE
17.74
CZ.CHX
Just Added
Bit display rack for Rockhard bits. Display rack holds twelve
tubs. No bits or tubs come with display rack.
Carbon Steel Wire Bristles. Fit any reciprocating saw and makes
clean-up and surfact prep a snap. Removes flaking paint, rust,
scratches, dirt and small imperfections. Use on concrete, metal,
stone and wood surfaces.
DESC
PRICE
6.82
V.EZX
PRICE
12.50
A.OZX
SPYDER WIRE BRUSH RECIPROCATING SAW
ATTACHMENT
400002 WIRE BRUSH
UOM
EA
A
SPYDER DOUBLE SIDED OSCILLATING
NONAGON SANDPAPER
ITEM #
362638
ITEM #
456845
SP
[email protected]
Consists of: 3 Grinding stones, 952, 8193, 85422; 1
Dressing stone, 415; 1 Wire brush, 428; 1 Felt polishing wheel, 429; 2 High
speed cutters, 191, 194; 1 Drum sander band, 408; 2 Fine sander bands, 432; 2
Mandrels, 401, 402; 36 Cut-off wheels, 409.
SPYDER CORNER SANDING PAD
ITEM #
456837
DESC
400004 NYLON BRUSH
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Bit Sets
Brass brushes are non-sparking and sofer than steel,
so they will not scratch other metals. Use on gold,
copper, brass and other precious metals. 3/4" x 1/8"
ITEM #
096008
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Brushes
PRICE
6.82
V.EZX
ITEM #
856500
*
NEW
1-800-776-0976 NOVEMBER
2016
DESC
SP UOM PRICE
0.01
A
X.XLX
ROCKHARD TOOLS BIT DISPLAY RACK [email protected] DS
www.wallacehardware.com
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Grout Removal Blades
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Rotary Files
DREMEL GROUT REMOVAL BLADE
VERMONT AMERICAN VALUED ROTARY FILES
Remove wall and floor grout to free a broken tile.
For filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum sales.
Can be used with all electric drills.
ITEM #
345504
DESC
SP
[email protected]
MM500 GROUT REMOVAL BLADE 1/8
UOM
EA
A
PRICE
14.98
CV.HOX
DREMEL GROUT REMOVAL BLADE
DESC
16674 ROTARY FILE 1/2IN X 7/8IN
SP
[email protected]
UOM
CD
A
PRICE
4.19
L.EAX
VERMONT AMERICAN VALUED ROTARY FILES
Remove wall and floor grout to free a broken tile.
ITEM #
352306
ITEM #
332364
DESC
SP
[email protected]
MM501 GROUT REMOVAL BLADE 1/16
UOM
EA
A
PRICE
14.98
CV.HOX
For filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum sales.
Can be used with all electric drills.
ITEM #
332402
DESC
16676 ROTARY FILE 1/2IN X 7/8IN
SP
[email protected]
UOM
CD
A
PRICE
4.19
L.EAX
SPYDER GROUT OUT REMOVAL TOOL
VERMONT AMERICAN VALUED ROTARY FILE
Fits all reciprocating saws. Carbide grip edge. 1/16 in.
ITEM #
353922
DESC
SP
UOM PRICE
9.45
R.OXZ
100227 SPYDER GROUT OUT REMOVAL TOOL- [email protected] CD
1/16IN
A
SPYDER GROUT OUT REMOVAL TOOL
DESC
SP
UOM PRICE
9.45
R.OXZ
100231SPYDER GROUT OUT REMOVAL TOOL - [email protected] CD
3/16IN
A
SP
[email protected]
UOM
CD
A
PRICE
4.05
L.VLX
ITEM #
314625
DESC
16672 ROTARY FILE 1/2IN X 7/8IN
SP
[email protected]
UOM
CD
A
PRICE
4.15
L.EOX
VERMONT AMERICAN VALUED ROTARY FILES
For filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum sales.
Can be used with all electric drills.
Fits all reciprocating saws. Carbide grip edge. 1/16 in. and
3/16 in.
DESC
100234 SPYDER GROUT OUT MULTIPACK
REMOVAL TOOL
www.wallacehardware.com
DESC
16671 ROTARY FILE 1/2IN X 7/8IN
For filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum sales.
Can be used with all electric drills.
SPYDER GROUT OUT REMOVAL TOOL
MULTIPACK
ITEM #
354120
ITEM #
314617
VERMONT AMERICAN VALUED ROTARY FILES
Fits all reciprocating saws. Carbide grip edge. 3/16 in.
ITEM #
354112
For filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum
sales. Can be used with all electric drills.
SP UOM PRICE
[email protected] CD 13.65
A
Y.CXZ
ITEM #
314633
DESC
16677 ROTARY FILE 1/2IN X 7/8IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
3.99
L.VLX
149
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Rotary Files
VERMONT AMERICAN VALUED ROTARY RASP
For rasping and filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum sales.
Can be used with all electric drills.
ITEM #
314641
DESC
16680 ROTARY RASP 1/4IN X 7/8IN
SP
[email protected]
UOM
CD
A
PRICE
4.05
L.VHX
VERMONT AMERICAN VALUED ROTARY RASP
For rasping and filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum
sales. Can be used with all electric drills.
ITEM #
314668
DESC
16681 ROTARY RASP 5/8IN X 1-1/8
SP
[email protected]
UOM
CD
A
PRICE
4.05
L.VLX
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Rotary Files
VERMONT AMERICAN 1/2"X7/8" CONE
ROTARY FILE
For rasping or filing wood or soft metal. Special alloy
steel is hardened and tempered for long life. Precision
cutting edges will not clog or load up. 1/4" shank fits all
drills. Carded.
ITEM #
373370
DESC
16678 ROTARY FILE 1/2INX7/8IN
SP
[email protected]
UOM
CD
A
PRICE
4.00
L.RXZ
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Oscillating Blades
IMPERIAL BLADES ONE-FIT FAST WOOD HCS
BLADE
For rasping and filing wood and metal. Special alloy tool steel is used to
manufacture these fast, accurate Valued rotary rasps and files.
Individually display-packaged on eye-catching cards for maximum sales.
Can be used with all electric drills.
ONE-FIT anchor to ensure proper fit on every oscillating tool. 1-1/4
inch blade width. Constructed with high carbon steel. The coarse
tooth saw blade has larger teeth for aggressive cutting. It is
designed for cutting wood, drywall and other soft material. This
blade will cut through a few nails but is mainly used for softer applications.
Almost as fast as a reciprocating saw, they can be used for cutting under the
kick plate when installing new kitchen flooring, undercutting door jambs or
flush cutting tongue-and-groove. They have a flush-cut design to allow the
operator to lay the blades flat on surfaces perpendicular to the cut. Made in
the USA.
ITEM #
332437
ITEM #
459658
VERMONT AMERICAN VALUED ROTARY RASP
DESC
16682 ROTARY RASP 5/8IN X 1-3/8
SP
[email protected]
UOM
CD
A
PRICE
4.19
L.RXZ
459666
DESC
SP UOM PRICE
9.95
A
H.VCX
[email protected] PG
26.95
A
LX.VAX
IBOA200-1 FAST WOOD HCS BLADE 1-1/4IN1PK [email protected] PG
IBOA200-3 FAST WOOD HCS BLADE 1-1/4IN
3PK
VERMONT AMERICAN VALUED ROTARY RASP
For rasping and filing wood and metal. Individually display-packaged
on eye-catching cards for maximum sales. Can be used with all electric
drills.
ITEM #
314676
DESC
16684 ROTARY RASP 5/8IN X 1-3/8
SP
[email protected]
UOM
CD
A
PRICE
4.05
L.VLX
VERMONT AMERICAN VALUED ROTARY RASPS
For rasping and filing wood and metal. Individually display-packaged
on eye-catching cards for maximum sales. Can be used with all
electric drills. 5/8" Diameter.
IMPERIAL BLADES ONE-FIT JAPANESE
PRECISION HCS BLADE
ONE-FIT anchor to ensure proper fit on every oscillating tool. 1-1/4
inch blade width. Constructed with high carbon steel. The Japanese
precision style oscillating blade uses extremely sharp teeth for
making precision cuts through wood. This 1 1/4-Inch blade and "J"
tooth design, allows you to make flush cuts with ease on a cut-by-cut basis.
Made in the USA.
ITEM #
459674
459682
459690
ITEM #
314684
150
DESC
16686 ROTARY RASP 5/8IN DIA
SP
[email protected]
UOM
CD
A
PRICE
4.19
L.RXZ
DESC
SP UOM PRICE
11.95
A
A.YXZ
IBOA220-3 PRECISION HCS BLADE 1-1/4IN 3PK [email protected] PG 29.95
A
LZ.OCX
IBOA220-10 PRECISION HCS BLADE 1-1/4IN
[email protected] PG
89.95
10PK
A
RY.HCX
IBOA220-1 PRECISION HCS BLADE 1-1/4IN 1PK [email protected] PG
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Oscillating Blades
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Oscillating Blades
IMPERIAL BLADES ONE-FIT FAST WOOD HCS
BLADES
IMPERIAL BLADES ONE-FIT UNIVERSAL BM TIN
STORM BLADE
ONE-FIT anchor to ensure proper fit on every oscillating tool
Constructed with high carbon steel. 2-1/2 inch blade width.
The coarse tooth saw blade has larger teeth for aggressive
cutting. It is designed for cutting wood, drywall and other soft
material. This blade will cut through a few nails but is mainly used for softer
applications. Almost as fast as a reciprocating saw, they can be used for
cutting under the kick plate when installing new kitchen flooring, undercutting
door jambs or flush cutting tongue-and-groove. They have a flush-cut design
to allow the operator to lay the blades flat on surfaces perpendicular to the
cut. Made in the USA.
ONE-FIT anchor to ensure proper fit on every oscillating tool.
Constructed with bi-metal materials. 1-1/4 blade width. The industryleading, titanium coated Bi-Metal STORM blade in our line of
premium blades is designed for wood, metal and PVC. Our highest
quality titanium-coated, high speed steel blade is specifically designed for allpurpose applications. Popular uses for this blade: Cutting through nail-laden
wood, deck screws, sheet metal, etc. Made in the USA.
ITEM #
459704
459771
459712
DESC
IBOA250-1 FAST WOOD HCS BLADE 2-1/2IN
1PK
IBOA250-3 FAST WOOD HCS BLADE 2-1/2IN
3PK
SP UOM PRICE
[email protected] PG
10.95
A
A.OLX
[email protected] PG
29.95
A
LO.LXZ
IMPERIAL BLADES ONE-FIT JAPANESE
PRECISION HARDWOOD HCS BLADE
ONE-FIT anchor to ensure proper fit on every oscillating tool.
Constructed with high carbon steel. 2-1/2 inch blade width.
The Japanese precision style oscillating blade uses extremely
sharp teeth for making precision cuts through wood. This 2
1/2-inch blade and J tooth design, allows you to make flush cuts with ease on
a cut-by-cut basis. Made in the USA.
ITEM #
459720
459739
DESC
SP UOM PRICE
12.95
A
Y.REX
IBOA270-3 PRECISION HCS BLADE 2-1/2IN 3PK [email protected] PG 32.95
A
LE.XVX
IBOA270-1 PRECISION HCS BLADE 2-1/2IN 1PK [email protected] PG
ITEM #
459763
DESC
SP UOM PRICE
14.95
CZ.ORX
32.95
LE.XVX
IBOAT330-1 UNIV BM TIN STORM BLADE 1-1/4 [email protected] PG
1PK
A
IBOAT330-3 UNIV BM TIN STORM BLADE 1/1/4 [email protected] PG
3PK
A
IMPERIAL BLADES ONE-FIT WOOD WITH NAILS
BI-METAL TIN STORM BLADE
ONE-FIT anchor to ensure proper fit on every oscillating tool.
Constructed with bi-metal materials. 1-1/4 inch blade width.
Longest-life blades with special titanium-coated, bi-metal teeth.
Stepped shape for sawing flush to the surface. Can be simply
plunged into the material at any point, no clearance necessary behind the
work piece. Wood teeth, bi-metal, for all wooden materials up to 2-inch, also
with nails, plasterboard, all plastics and fiberglass reinforced plastics. Saw
blade with high cutting speed, extremely powerful with extra-long service life.
Ideal for all crafts including general contracting, flooring, tile and bathroom
renovation. Made in the USA.
ITEM #
459798
459801
459828
DESC
SP UOM PRICE
13.95
CX.OYX
29.95
LZ.OCX
84.95
RE.AOX
IBOAT336-1 WOOD W/NAILS BM STORM BLD [email protected] PG
1-1/4 1PK
A
IBOAT336-3 WOOD W/NAILS BM STORM BLD [email protected] PG
1-1/4 3PK
A
IBOAT336-10 WOOD W/NAILS BM STORM BLD [email protected] PG
1-1/4 10PK
A
IMPERIAL BLADES ONE-FIT WOOD WITH
NAILS BI-METAL TIN STORM BLADE
ONE-FIT anchor to ensure proper fit on every oscillating tool.
Constructed with bi-metal materials. 2-1/2 inch blade width.
Longest-life blades with special titanium-coated, bi-metal
teeth. Stepped shape for sawing flush to the surface. Can be
simply plunged into the material at any point, no clearance necessary behind
the work piece. Wood teeth, bi-metal, for all wooden materials up to 2-Inch ,
also with nails, plasterboard, all plastics and fiberglass reinforced plastics.
Saw blade with high cutting speed, extremely powerful with extra-long service
life. Ideal for all crafts including general contracting, flooring, tile and
bathroom renovation. Made in the USA.
IMPERIAL BLADE ONE-FIT BI-METAL BLADE WITH
NAILS
ONE-FIT anchor to ensure proper fit on every oscillating tool.
Constructed with bi-metal materials. 1-1/4 inch blade width. The
universal bi-metal saw blade is made with the industry's highest
quality material. This blade is made to cut larger framing nails,
bolts, sheet metal, etc. Made in the USA.
ITEM #
459747
DESC
IBOA300-1 WOOD W/NAILS BM 1-1/4IN 1PK
459755
IBOA300-3 WOOD W/NAILS BM 1-1/4IN 3PK
www.wallacehardware.com
SP UOM
[email protected] PG
A
[email protected] PG
A
PRICE
9.95
H.VCX
26.95
LX.XAX
ITEM #
459836
459844
DESC
IBOAT337-1 WOOD W/NAILS BM STORM BLD
2-1/2 1PK
IBOAT337-3 WOOD W/NAILS BM STORM BLD
2-1/2 3PK
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
14.95
A
CZ.CVX
[email protected] PG
32.95
A
LV.EZX
151
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Oscillating Blades
IMPERIAL BLADES ONE-FIT UNIVERSAL BI-METAL
TIN STORM BLADES
ONE-FIT anchor to ensure proper fit on every oscillating tool.
Constructed with bi-metal materials. 1-3/4". The industry-leading,
titanium coated Bi-Metal STORM blade in our line of premium
blades is designed for wood, metal and PVC. Our highest quality
titanium-coated, high speed steel blade is specifically designed for all-purpose
applications. Popular uses for this blade: Cutting through nail-laden wood,
deck screws, sheet metal, etc. Made in the USA.
ITEM #
459852
459860
459879
DESC
IBOAT340-1 UNIV BM STORM BLD 1-3/4 1PK
IBOAT340-3 UNIV BM TIN STORM BLADE
1/3/4IN 3PK
IBOAT340-10 UNIV BM TIN STORM BLADE 13/410PK
SP UOM PRICE
[email protected] PG
15.95
A
CZ.AZX
[email protected] PG
34.95
A
LR.ERX
[email protected] PG
109.95
A
AE.LCX
IMPERIAL BLADE ONE-FIT 90 DEGREE
REACH BLADE
ONE-FIT anchor to ensure proper fit on every
oscillating tool. Constructed with bi-metal materials. 2
blade width. Every oscillating multi-tool has faced impossible-to-reach cuts on
one project or another. The patented REACH blade will allow you to use your
tool like never before, bringing almost any cut within your reach. Cut
everything from sub-flooring under toe kicks to rusted tabs hidden inside
mechanical boxes. Made in the USA.
ITEM #
459887
DESC
IBOA391-1 PLUNGE CUT BLADE 2IN 90
DEGREE 1PK
SP UOM PRICE
[email protected] PG
19.95
A
CE.VEX
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Oscillating Blades
IMPERIAL BLADES 3-PC BLADE PACK
Set of 3 popular sizes of blades for your oscillating
multi-tool; Includes 1 each of the following One Fit
blades: IBOA 133 1-1/4" deep wood HCS blade, IBOA
150 2-1/2" standard wood HCS blade, IBOA 338 1-3/4"
universal biimetal blade.
ITEM #
459357
*
NEW
DESC
IBOAV1-3 ONE FIT VARIETY 3 PACK
BLADES
IMPERIAL BLADES ONE-FIT VARIETY 6
PACK BLADES
ONE-FIT anchor to ensure proper fit on every oscillating
tool. All blades constructed with bi-metal materials. Our
newest variety 6-pack of titanium-coated, bi-metal teeth
give the blades longer life and comes with a carrying
case. These bi-metal blades are optimized for wood, metal and PVC. Our
highest quality titanium coated high speed steel blade is specifically designed
for various applications. Popular uses for this blade: Cutting through nail-laden
wood, deck screws, sheet metal, etc. Included are: (2)#IBOAT340,
(2)#IBOAT330, (2)#IBOAT336 and a carrying case. Made in the USA.
ITEM #
459917
DESC
SP UOM PRICE
59.95
A
VE.ERX
IBOATV-6 ONE FIT VARIETY PACK STORM 6PC [email protected] PG
IMPERIAL BLADES ONE-FIT SEGMENTED
HSS TIN STORM BLADE
OME-FIT anchor to ensure proper fit on every
oscillating tool. Constructed with high speed steel. 31/8 blade width. This is a high-speed steel flat saw blade is segmented on one
side. The high-speed steel material is rigid, allowing the blade to cut through
harder wood and sheet metal up to 1mm thick as well as carbon fiber,
fiberglass, and nails. Made in the USA.
ITEM #
459925
IMPERIAL BLADES ONE-FIT VARIETY 3
PACK BI-METAL BLADES
DESC
IBOAT410-1 SEGMENT HSS SAW BLADE 3-1/8
1PK
ONE-FIT anchor to ensure proper fit on every
oscillating tool. All blades constructed with bi-metal
materials. The variety 3-pack of titanium-coated, bi-metal teeth give the
blades longer life. These bi-metal blades are optimized for wood, metal and
PVC. Our highest quality titanium coated high speed steel blade is specifically
designed for various applications. Popular uses for this blade: Cutting through
nail-laden wood, deck screws, sheet metal, etc. Blades included are:
(1)#IBOAT340, (1)#IBOAT330, and (1)#IBOAT336. Made in the USA.
IMPERIAL BLADE ONE-FIT SEGMENT
CARBIDE BLADE
ITEM #
459895
ITEM #
459968
152
DESC
SP UOM PRICE
32.95
A
LV.EZX
IBOATV-3 ONE FIT VARIETY PACK STORM 3PC [email protected] PG
SP UOM PRICE
[email protected] PG
24.95
A
CA.EOX
SP UOM PRICE
[email protected] PG
24.95
A
CA.EYX
ONE-FIT anchor to ensure proper fit on every
oscillating tool. 2-1/2 blade width. Great for grout and
groove cutting. Coated with a carbide grit. The segmented carbide blade gives
you the ability to cut out damaged tile grout, scoring grooves in plaster,
porous concrete, and similar construction materials. Made in the USA.
DESC
IBOA610-1 SEGMENT CARBIDE BLADE 2-1/2IN
1P
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
24.95
A
CA.YRX
www.wallacehardware.com
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Oscillating Blades
IMPERIAL BLADE ONE-FIT TRIANGULAR
CARBIDE GRIT BLADE
DREMEL 3 BLADE MULTIPACK
ONE-FIT anchor to ensure proper fit on every
oscillating tool. Great for quick sanding of mortar.
Coated with a carbide grit. The carbide RASP is best
utilized for coarse grinding, rasping, or aggressive material removal over large
areas. Applications include wood, hardened adhesives, thinset, and masonry.
Made in the USA.
ITEM #
459976
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Scraper Blades
DESC
(MM422, MM440, MM450) multimax oscillating tool
accessory. Includes MM450-3" wood and drywall
blade, MM440-3/4" wood blade and MM422-3/4" wood
and metal blade.
ITEM #
345466
DESC
MM491 CUTTING ASSORTMENT PACK
SP
[email protected]
UOM
PG
A
PRICE
28.74
CA.XYX
SP UOM PRICE
[email protected] PG
24.95
A
CY.OZX
IBOA620-1 TRIANGULAR RASP CARBIDE
BLADE 1PK
DREMEL FLUSH CUT WOOD BLADE
IMPERIAL BLADES ONE-FIT SEGMENTED
DIAMOND GRIT BLADE
ONE-FIT anchor to ensure proper fit on every oscillating
tool. Durable diamond coating that allows for longer and
consistent cutting or grinding. Coated with a diamond grit.
Diamond blade will remove tough grout from between tiled
surfaces. Efficient shape allows aggressive grinding without damaging the tile.
Long-lasting blade enables continuous work on large projects. For commercial
applications such as cutting out marble and trass concrete joints. Also for
sinking ducts in plaster, brick, pumice and honeycomb stone as well as
autoclave aerated concrete. These premium, long lasting blades are designed
specifically for harder grouts. Made in the USA.
ITEM #
459984
DESC
SP UOM PRICE
44.95
OV.AOX
IBOA730-1 SEGMENT BOOT DIAMOND BLADE [email protected] PG
1PK
A
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Scraper Blades
Lightweight and compact, easy to use for long periods of time in tight
spaces. Operates at very high speeds for quick results and smooth
finishes. Perfect for work demanding precision and control.
ITEM #
345296
DESC
MM600 RIGID SCRAPER BLADE
SP
[email protected]
UOM
EA
A
PRICE
10.72
R.HXZ
Flexible scrapers are used for hard to reach areas and removal
of soft materials such as caulk.
DESC
MM610 FLEXIBLE SCRAPER BLADE
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
12.77
A.XVX
DESC
MM422 WOOD/METAL FLUSH CUT BLADE
SP UOM
[email protected] EA
A
PRICE
6.81
R.HXZ
DREMEL WOOD AND METAL FLUSH CUT BLADE
Use to tackle numerous tasks such as sanding wood, removing
caulk, removing tile grout, cutting drywall, scraping stuck vinyl
flooring, making flush cuts in wood trim, cutting copper pipe and
removing window glaze, to name a few. Quick fit accessory change
system provides accessory changes twice as fast as similar
oscillating tool systems. Flush cut blades are used to make precise cuts to
allow for installation of flooring or wall trim. May be used on non-ferrous
metals, wood, plastic, drywall and other soft materials.
DREMEL FLEXIBLE SCRAPER BLADE
ITEM #
345490
UOM
EA
A
Use to tackle numerous tasks such as sanding wood, removing
caulk, removing tile grout, cutting drywall, scraping stuck vinyl
flooring, making flush cuts in wood trim, cutting copper pipe and
removing window glaze, to name a few. Quick fit accessory change
system provides accessory changes twice as fast as similar
oscillating tool systems. Flush cut blades are used to make precise cuts to
allow for installation of flooring or wall trim. May be used on non-ferrous
metals, wood, plastic, drywall and other soft materials.
Use the rigid scraper blade for removing stuck vinyl flooring, carpeting
and carpeting pad.
ITEM #
345474
SP
[email protected]
DREMEL WOOD AND METAL FLUSH CUT BLADE
ITEM #
345318
DREMEL RIGID SCRAPER BLADE
DESC
MM411 WOOD FLUSH CUT BLADE 3/8
PRICE
12.77
A.XVX
ITEM #
345512
DESC
MM422B WOOD/MTL FLUSH CUT BLADE
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] PG
A
PRICE
38.30
LV.CZX
153
Hand & Power Tools
Rotary Tools and Accessories, Bits, Cutters
and Grinders, Scraper Blades
Power Sanders, Grinders and Accessories,
Power Sanders, Belt Sanders
DREMEL FLUSH CUT WOOD BLADE
SKIL 6 AMP BELT SANDER
Lightweight and compact, easy to use for long periods of time in
tight spaces. Operates at very high speeds for quick results and
smooth finishes. Perfect for work demanding precision and control.
Patented pressure control technology alerts user when
too much/too little pressure is applied. Auto track
system keeps belt centered on track. Micro filtration system captures and
contains fine dust particles. Clear view dust canister removes the guesswork
of when to empty the dust container. Single lever belt changes.
ITEM #
345326
DESC
SP
[email protected]
MM440 WOOD FLUSH CUT BLADE 3/4
UOM
EA
A
PRICE
13.84
A.HCX
Lightweight and compact, easy to use for long periods of time in
tight spaces. Operates at very high speeds for quick results and
smooth finishes. Perfect for work demanding precision and control.
SP
[email protected]
UOM
EA
A
DESC
SP UOM
[email protected] PG
A
MM440B WOOD FLUSH CUT BLADE 3/4IN
PRICE
31.92
LX.XYX
DESC
MM450 WOOD/DRYWALL SAW BLADE 3IN
Includes 8 detail attachments: finger, slot, outside
corner, inside corner, concave, flex, extended Delta, 3
position nose detail; 32 pieces of sandpaper; Octo
sander and carry bag. Dust canister keeps work area clean. Toolless
attachment system saves time by changing attachments quickly and easily. 3
position nose detail maximizes the use of abrasive when sanding in corners.
Built-in worklight brightens poorly lit areas. 8 Amp, 120V, 60 Hz.
ITEM #
003859
The Dremel multi-max can tackle numerous tasks such
as sanding wood, removing caulk, removing tile grout,
cutting drywall, scraping stuck vinyl flooring, making
flush cuts in wood trim, cutting copper pipe and removing window glaze, to
name a few. Quick fit accessory change system provides accessory changes
twice as fast as similar oscillating tool systems. Ideal for making precise cuts in
wood, plaster, drywall material. Applications include cutting openings in
flooring for venting, repairing damaged flooring and cutting openings for
electrical boxes.
SP UOM
[email protected] EA
A
PRICE
11.07
R.YHX
DESC
7302-02 FINISHING SANDER OCTO
SP
[email protected]
ITEM #
329843
DESC
BDEQS300 1/2 IN SHEET SANDER
SP
[email protected]
DEWALT 1/4" SHEET PALM SANDER
Dust sealed switch for increased durability. Dual plane
counter-balanced low-vibration design reduces fatigue.
2.0 Amp motor moves at 13,500 opm, providing a
superior finish. Sealed 100% ball-bearing construction
provides longer life. 1/16" orbit diameter. 2.3 lbs.
Includes Kit box, Dust Bag and Sandpaper Punch.
154
SP
UOM PRICE
22.36
A
CV.XHX
PRICE
47.27
VL.LXZ
Compact size maximizes user control. Filtered Dust
Collection keeps work area clean. Soft grip body
provides comfort for prolonged sanding. Multi-Purpose. ideal for material
removal and surface preparation. Dust Sealed Switch protects internal
components.
The Dremel multi-max can tackle numerous tasks such as sanding wood,
removing caulk, removing tile grout, cutting drywall, scraping stuck vinyl
flooring, making flush cuts in wood trim, cutting copper pipe and removing
window glaze, to name a few. Quick fit accessory change system provides
accessory changes twice as fast as similar oscillating tool systems. Ideal for
making precise cuts in wood, plaster, drywall material. Applications include
cutting openings in flooring for venting, repairing damaged flooring and
cutting openings for electrical boxes.
DESC
UOM
EA
A
BLACK & DECKER 1/4" SHEET SANDER
DREMEL WOOD/DRYWALL SAW BLADE
ITEM #
345415
PRICE
61.17
EV.RLX
SKIL OCTO MULTI-FINISHING SANDER
DREMEL WOOD/DRYWALL SAW BLADE
ITEM #
345385
DESC
7510-01 BELT SANDER 3X18IN
Power Sanders, Grinders and Accessories,
Power Sanders, Palm Sanders
DREMEL FLUSH CUT WOOD BLADE
ITEM #
345334
ITEM #
374083
ITEM #
293814
DESC
D26441K SHEET PALM SANDER 1/4IN
MM450B WOOD/DRYWL SAW BLADE BULK [email protected] PG
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
UOM
EA
A
PRICE
34.89
OC.CRX
PRICE
59.28
EL.YOX
www.wallacehardware.com
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Power Sanders, Palm Sanders
Power Sanders, Grinders and Accessories,
Power Sanders, Orbital Sanders
SKIL SHEET SANDER
SKIL BOSCH RANDOM ORBIT SANDER
Pressure control technology warns user when
excessive pressure is applied. Micro-filtration captures
and contains fine dust particles. Clear view dust
canister removes guess work of when to empty canister. Built-in vacuum
adapter for maximum dust collection. Soft-grip design for added comfort and
control. Dust sealed switch for extended tool life.
The Bosch ROS10 5" single speed palm-grip random
orbit sander kit comes with everything you need to get
started sanding right out of the box. The easy to
remove, see through dust canister keeps dust and particles contained making
less to clean up and the micro filtration system keeps particles down to 2
microns in diameter out of the air. The random orbit sanding action allows for
a combination of pad orbit and rotation delivery for a well-blended, ultrasmooth finish with a fast removal rate, making it an ideal choice for your wood
finishing needs.
ITEM #
374075
DESC
7292-02 SHEET SANDER 1/4IN
SP
[email protected]
UOM
EA
A
PRICE
35.45
OC.REX
Power Sanders, Grinders and Accessories,
Power Sanders, Orbital Sanders
ITEM #
454222
DESC
ROS10 RANDOM ORBIT SANDER 5IN
SP
[email protected]
UOM
EA
A
PRICE
68.81
RC.VZX
OLD WORLD 10" RANDOM ORBITAL
WAXER/POLISHER
3000 OPM / RPM provides power to get the job done
fast and efficiently. Random orbital motion mimics hand
polishing, ensuring a gentle swirl-free finish.
Permanent magnet motor provides quiet operation.
Easily maneuver around your vehicle with over 4' of cord. Comfortable grip for
more precise control while right angle handle provides extended reach. One
applicator bonnet and one polishing bonnet are included. Weighs: 6.1.
ITEM #
333565
DESC
SP
[email protected]
PKCOVB WAXER/POLISHER ORB 10IN
UOM
EA
A
PRICE
39.95
OX.HOX
BOSCH VARIABLE SPEED RANDOM
ORBIT SANDER KIT
120-Volt. Durable and compact twist-off dust canister
shows dust level and easily detaches. Features
microfilter system for optimal filtering of fine dust and trapping small particles.
Hook-and-loop disc attachment contains over 35,000 long-life hooks ensure
from grip of the disc. The variable speed dial allows you to match the speed to
work piece and task. Anti-spillback canister design minimizes dust spillback
into sander.
ITEM #
377732
MAKITA 5" RANDOM ORBITAL SANDER
KIT
DESC
ROS20VSK RANDOM ORBIT SANDER KIT
5IN
SP UOM PRICE
[email protected] KT
96.50
A
AR.CRX
Smooth and fast sanding with 3.0 Amp motor (12,000
OPM). Large 1/8" random orbit action. Pad control
system. Efficient through-the-pad dust collection system for a cleaner
environment. Dust-sealed switch. Rubberized grip for improved operator
comfort and control. Uses quick change 5" (8-hole) hook-and-loop abrasive
paper. Oversized sealed ball bearing construction.
ITEM #
306150
DESC
BO5030K SANDER RANDOM ORBITAL KIT
5IN
SP UOM PRICE
[email protected] EA
83.26
A
HV.OVX
Features a 3.0 Amp motor that spins the pad at 12,000
OPM. Shorter height allows the user to get closer to
work piece. Rubber over-mold in all of the critical areas
of the sander for comfortable use. Separate counterweight design reduces
vibration for decreased user fatigue. Dust-sealed switch to protect against
dust ingestion for longer switch life. Improved dust collection and interfacing
with vacuum locking system. Dust bag has patented one-hand locking system.
SKIL RANDOM ORBIT SANDER
2.4 Amp motor. Random orbit action. Pad break. Micro
filter canister. Soft-Grip. Dust sealed switch. Ballbearing construction. 5" disc size. 3 sanding discs.
Carrying case.
ITEM #
273597
DESC
7492-02 RANDOM SANDER ORBIT W/BAG &
DISC 5IN
www.wallacehardware.com
DEWALT RANDOM ORBIT SANDER
W/BAG
SP UOM PRICE
[email protected] EA
47.27
A
VL.LXZ
ITEM #
291448
DESC
DWE6421K 5IN RANDOM ORBIT H&L SANDER
W/BAG
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
71.93
A
RV.LZX
155
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Power Grinders, Angle Grinders
Power Sanders, Grinders and Accessories,
Power Grinders, Angle Grinders
MAKITA 4-1/2" ANGLE GRINDER
MAKITA 4-1/2" ANGLE GRINDER
Extra large paddle switch for easy operation right or
left handed. Lock on button. 6.4 AMP motor,. Spindle
lock. Double insulated. Specs: 4-1/2" grinding wheel, 3-1/2" wire cup brush, 41/2" sanding disc, 10,000 RPM no load speed, 5/8" spindle thread, 10-7/8"
overall length, 3.9 lbs. net weight. 6.4 amps.
Switch is located on top of motor housing. Small
circumference barrel grip for easy handling. High
power-to-weight ration; 5 AMP. Labyrinth construction
seals motor and bearings from contamination. Shaft
lock for easy wheel changes. Side handle can be
installed on either side of tool. Double insulated. Standard Equipment: 1 EA. 41/2" Grinding wheel, Lock nut wrench. Side handle. Lock nut. Inner flange.
Wheel guard. Specifications: Grinding wheel 4-1/2".
ITEM #
332828
DESC
9557PB ANGLE GRINDER 4-1/2IN
SP
[email protected]
UOM
EA
A
PRICE
95.16
AV.YRX
ITEM #
243078
DESC
GA4530 ANGLE GRINDER 4-1/2IN
SP
[email protected]
UOM
EA
A
PRICE
70.04
RL.EVX
SKIL 4-1/2" ANGLE GRINDER
Powerful 6 amp motor, tool-less guard adjustment,
heavy duty metal gear housing for added durability.
Compact grip design for comfort and control.
ITEM #
032778
DESC
9295-01 ANGLE GRINDER 4-1/2IN
BLACK & DECKER GRINDER
SP
[email protected]
UOM
EA
A
PRICE
35.52
OC.HLX
DEWALT 4-1/2" ANGLE GRINDER
4-1/2" (115MM) heavy duty mini grinder. 10,000 rpm.
Ball bearing construction. 3 position side handle.
Convenient paddle switch. Standard equipment: Depressed center wheel,
spanner wrench, guard assembly, clamp nut, side handle, grinding wheel
backing flange. Horsepower: .54, AMP: 6.0 AC/DC, Watts out: 700, RPM: 10,
000. Spindle thread: 5/8" - 11". 6 amp.
ITEM #
395382
DESC
SP UOM PRICE
73.36
RE.VYX
DWE4011 ANGLE GRINDER 7.0AMP 12,000RPM [email protected] EA
4-1/2IN
A
Flexible - power of corded. Freedom of cordless. The
world's first battery that automatically changes voltage
when you change tools. Brake engages when trigger is
released, stopping speeds of 1.5 seconds with standard
grinding wheel. Kickback brake engages when a pinch,
stall, or bind-up event is sensed. E-clutch activates in less than a tenth of a
second when a pinch/stall is detected, shutting down the motor. 9,000 RPM
speed allows the use of 4-1/2" to 6" wheels.
ITEM #
329567
*
NEW
329948
NEW
DESC
SP UOM PRICE
346.75
OXY.EYX
34.18
OX.ELX
DCG414T1 FLEXVOLT 60V GRINDER 1 [email protected] KT
BATT KIT
A
PCE810 4-12 IN 6.0 AMP SM ANGLE
[email protected] EA
GRINDER
A
Power Sanders, Grinders and Accessories,
Power Grinders, Bench Grinders
SKIL TOOL BENCH GRINDER
PORTER CABLE 4-1/2" ANGLE GRINDER
11,000 RPM for high speed material removal. Durable
6-amp motor powers through jobsite tasks with ease.
Cast metal gear housing increases jobsite durability
and tool longevity. Three position adjustable side
handle allows greater control in multiple positions. Soft grip handle improves
user comfort and control. 1 free wheel.
Sharpen a variety of materials with this 6 in. bench
grinder. Built-in LED lights and adjustable tool rests
ensure accurate results. Features built-In LED work
lights over wheels keep work piece lit. Cast-Iron base with pre-drilled holes for
quick and easy mounting to a bench top. Medium and coarse wheels for a
variety of materials. Eye shields for increased safety. Rubber feet for increased
stability.
ITEM #
329649
ITEM #
054666
156
DESC
PC60TAG SMALL ANGLE GRINDER W/1 FREE
WHEEL
SP UOM PRICE
[email protected] EA
34.18
A
OX.ELX
DESC
3380-01 BENCH GRINDER 6IN W/LIGHT
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
56.70
EC.EZX
www.wallacehardware.com
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Grinding Wheels
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Grinding Wheels
VERMONT AMERICAN
JMK/IIT GRINDING WHEEL
DEPRESSED CENTER. LONG LASTING, TRIPLEREINFORCED GRINDING WHEELS FOR SMALL AND
LARGE GRINDERS. IDEAL FOR FAST CUTOFF AND
STOCK REMOVAL TASKS. TYPE 27, THREADED HUBS
FOR 7" AND 9" GRINDERS. IDEAL FOR WELDERS,
AUTOMOTIVE AND MACHINE SHOPS, AND INDUSTRIAL USERS. DURABLE
ALUMINUM OXIDE FOR FAST METAL REMOVAL. IDEAL FOR WELD GRINDING,
SURFACE CONDITIONING, NOTCHING, CUTOFF AND STOCK REMOVAL. A24R
GRIT.
Metal & Steel grinding wheel. 115mm - 4-1/2". 13.300
max RPM.
ITEM #
354066
17373 WHEEL GRIND METAL 4IN
DESC
SP
[email protected]
394556
17453 WHEEL GRIND METAL 4IN
[email protected]
347140
17458 WHEEL GRIND METAL 4-1/2
[email protected]
374504
17468 WHEEL GRIND METAL 7IN
[email protected]
UOM
CD
A
EA
A
EA
A
EA
A
PRICE
4.05
L.ECX
2.29
C.VLX
2.45
C.VAX
7.55
V.RYX
ITEM #
296163
DESC
80050 WHEEL GRINDING 4-1/2IN
SP
[email protected]
UOM
EA
A
PRICE
1.37
X.ACX
GREAT NECK GRINDING WHEEL
36 assorted grinding wheels. All purpose industrial
quality. Each with 1/4" arbor. Coarse and fine grits.
Consists of 6 each of the following: 1" x 1", 1" x 1-1/2", 2"
x 1/2", 2" x 1/4", 2" x 2-1/2", 3" x 1/2".
ITEM #
102679
DESC
36GWE GRINDING WHEEL (36 PER DISP)
SP UOM
[email protected] DS
A
PRICE
91.89
EV.YXZ
VERMONT AMERICAN MASONRY
GRINDING WHEELS
Depressed Center. Long-lasting, triple-reinforced
grinding wheels for small and large grinders. Ideal for
fast cutoff and stock removal tasks. Type 27 threaded
hubs for 7" and 9" grinders. Ideal for welders,
automotive and machine shops, and industrial users. Silicone carbide grain for
general applications in concrete, stone or other masonry products. C24P grit.
ITEM #
354074
371432
DESC
17372 WHEEL GRIND MASONRY 4IN
17457 WHEEL GRIND MASNY 4-1/2
SP
[email protected]
[email protected]
UOM
CD
A
EA
A
PRICE
3.79
L.ORX
2.45
C.VYX
HOT MAX HUBLESS GRINDING WHEEL
Type 27. 4" diameter. 1/4" thickness. 5/8" arbor. 13,700
max RPM.
ITEM #
354430
354457
354465
354473
MAKITA GRINDING WHEELS FOR METAL
DESC
22008 GRINDING WHEEL HUBLESS
4INX1/4INX5/8IN
22009 GRINDNG WHEEL HBLS TP-27
4INX1/8INX5/8IN
22010 GRINDNG WHEEL HBLS TP27 41/2INX1/4INX7/8IN
22011 GRINDING WHEEL HUBLESS
5INX1/4INX7/8IN
SP UOM PRICE
[email protected] EA
1.80
A
C.OLX
[email protected] EA
1.80
A
C.OLX
[email protected] EA
2.23
A
C.RXZ
[email protected] EA
2.76
A
L.XCX
For metal polishing and general flat grinding.
Aluminum oxide abrasive grains are evenly distributed
to give a smooth surface. Non-threaded hub.
HOT MAX GRINDING WHEELS WITH HUB
ITEM #
373567
373575
373583
373605
373613
DESC
741402-8-1 GRINDNG WHEEL 24GRIT 4IN X
5/8IN
741402-9-1 GRINDNG WHEEL 24GRIT 4IN X
1/4IN
741405-2-1 GRINDNG WHEEL 36GRIT 4IN X
3/16IN
741423-0-1 GRINDNG WHEEL 24GRIT 4-1/2IN X
1/4IN
741424-8-1 GRINDNG WHEEL 36GRIT 4-1/2IN X
1/4IN
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
6.87
A
V.LYX
[email protected] EA
6.87
A
V.LYX
[email protected] EA
6.87
A
V.LYX
[email protected] EA
12.79
A
H.YZX
[email protected] EA
13.97
A
A.HOX
Type 27. 7" diameter. 1/4" thickness. 5/8" - 11 NC arbor.
8,500 max RPM.
ITEM #
354481
354503
DESC
22012 GRINDING WHEEL TYPE-27
7INX1/4INX5/8IN
22013 GRINDNG WHEEL TP27 4-1/2INX1/4IN X
5/8IN-11
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
5.92
A
V.OCX
[email protected] EA
4.41
A
O.LCX
157
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Grinding Wheels
HOT MAX BENCH GRINDING WHEEL
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Grinding Wheels
GATOR FINISHING PRODUCTS
GRINDING WHEEL
Use for metal grinding.
Metal grinding wheel for angle grinders.
2 4" x 1/8" x 5/8"
ITEM #
373753
373761
373842
373869
DESC
SP UOM PRICE
9.43
R.ARX
9.43
A
R.ARX
[email protected] EA
9.43
A
R.ARX
[email protected] EA
12.07
A
A.HYX
26000 BENCH WHEEL 36GRIT 6IN X 3/4IN X
[email protected] EA
1IN
A
26001 BENCH WHEEL 60GRIT 6IN X 3/4IN X 1IN [email protected] EA
26002 BENCH WHEEL 80GRIT 6IN X 3/4IN X
1IN
26003 BENCH WHEEL 36GRIT 6IN X 1IN X 1IN
ITEM #
345571
9603 METAL GRINDING WHEEL 4 X 1/8 X 5/8 IN [email protected] EA
345601
9605 METAL GRINDING WHEEL 4 X 1/4 X 5/8 IN
345717
9613 METAL GRINDNG WHEEL 4-1/2 X 1/8 X 7/8
IN
9615 METAL GRINDNG WHEEL 4-1/2 X 1/4 X 7/8
IN
9619 METAL GRINDNG WHEEL 4-1/2 X 1/4 X 5/8
IN
9649 METAL GRINDNG WHEEL 7 X 1/4 X 5/8 IN
345733
345806
345989
HOT MAX BENCH WHEEL REDUCING
BUSHING
For 1 inch wide wheel.
ITEM #
373893
DESC
SP UOM PRICE
3.55
L.EAX
26009 BENCH WHEEL REDUCE BUSHING F/1IN [email protected] EA
WIDE WHEEL
A
Type 27. 7" diameter. 1/8" thickness. 5/8"-11NC arbor.
8,500 max RPM.
DESC
Masonry grinding wheel for angle grinders.
2 4" x 1/8" x 5/8"
345598
345709
345725
345741
345865
158
VERMONT AMERICAN WIRE CUP BRUSH
DESC
16830 CUP BRUSH 3IN
SP
[email protected]
UOM
CD
A
PRICE
24.38
CE.LAX
MAKITA WIRE CUP BRUSH
Knit-type wire cup brush. 4" diameter. 5/8" - 11" Arbor
for use in Makita Grinders: 9005B, 9503BHZ,
9505BHZ.
GATOR FINISHING PRODUCTS
GRINDING WHEEL
ITEM #
345563
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Wire Cups
ITEM #
334138
SP UOM PRICE
[email protected] EA
7.49
A
E.VRX
26033 GRINDING WHEEL TP-27
7INX1/8INX5/8IN-11
SP UOM PRICE
1.89
A
C.COX
[email protected] EA
1.89
A
C.COX
[email protected] EA
2.05
A
C.LXZ
[email protected] EA
2.05
A
C.LXZ
[email protected] EA
5.65
A
O.ORX
[email protected] EA
5.95
A
O.EVX
5/8" - 11 arbor. Heavy duty aggressive cleaning.
Industrial duty. Knot wire.
HOT MAX GRINDING WHEEL WITH HUB
ITEM #
356433
DESC
ITEM #
579068
DESC
9602 MASONRY GRINDING WHEEL 4 X 1/8 X
5/8 IN
9604 MASONRY GRINDING WHEEL 4 X 1/4 X
5/8 IN
9612 MASONRY GRIND WHEEL 4-1/2 X 1/8 X 7/8
IN
9614 MASONRY GRIND WHEEL 4-1/2 X 1/4 X 7/8
IN
9618 MASONRY GRIND WHEEL 4-1/2 X 1/4 X 5/8
IN
9648 MASONRY GRIND WHEEL 7 X 1/4 X 5/8 IN
SP UOM PRICE
[email protected] EA
1.89
A
C.COX
[email protected] EA
1.89
A
C.COX
[email protected] EA
2.05
A
C.LXZ
[email protected] EA
2.05
A
C.LXZ
[email protected] EA
5.65
A
O.ORX
[email protected] EA
5.25
A
O.CVX
DESC
SP UOM PRICE
39.07
A
LV.VLX
743208-0A WIRE CUP BRUSH KNOT STYLE 4IN [email protected] EA
VERMONT AMERICAN WIRE CUP BRUSH
5/8" - 11 arbor. Heavy duty aggressive cleaning.
Industrial duty. Crimped wire.
ITEM #
334189
DESC
16831 CUP BRUSH 3IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
23.92
CE.XZZ
www.wallacehardware.com
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Wire Cups
VERMONT AMERICAN WIRE CUP BRUSH
DICO 2-1/2" MANDREL MOUNTED CUP
BRUSH
Uses only the highest quality wire available.
Manufactured by using advanced metering and flange
crimping techniques for balanced, true-running tools.
Ideal for removing rust, scale, or paint. Wire hardened
and tempered for long life. Precision balanced to
eliminate vibration. 1/4" shank fits all drills. Valued brand.
ITEM #
300969
16781 CUP BRUSH COARSE 2IN
DESC
SP
[email protected]
300985
16783 CUP BRUSH COARSE 3IN
[email protected]
300993
16784 CUP BRUSH FINE 3IN
[email protected]
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Wire Cups
UOM
CD
A
CD
A
CD
A
PRICE
4.63
L.YLX
6.09
O.ACX
6.65
V.CRX
Nylon brushes have abrasive impregnated in them, so
are great for stripping paint, and removing rust,
corrosion & weld scale. Also for preparing plastic,
fiberglass, and metal for primer. Nyalox brushes last up
to 10x longer than wire brushes - they hold their shape and won't rust or shed
bristles. As bristles wear, new abrasive is exposed, renewing the brush. Ideal
for working on large flat surfaces. Grit is color coded. Gray-coarse, orangemedium and blue-fine. Made in USA.
ITEM #
018562
DESC
7200010 CUP BRUSH 2-1/2IN 120G
SP
[email protected]
UOM
EA
A
PRICE
7.54
V.HCX
HOT MAX MOUNTED END BRUSHES
Crimped wire. Carbon steel. 3/4" coarse wire, 1/4"
round shank.
DICO 2-1/2" MANDREL MOUNTED CUP
BRUSH
ITEM #
354597
Nylon brushes have abrasive impregnated in them, so are
great for stripping paint, and removing rust, corrosion &
weld scale. Also for preparing plastic, fiberglass, and metal
for primer. Nyalox brushes last up to 10x longer than wire
brushes - they hold their shape and won't rust or shed bristles. As bristles
wear, new abrasive is exposed, renewing the brush. Ideal for working on large
flat surfaces. Grit is color coded. Gray-coarse, orange-medium and blue-fine.
Made in USA.
ITEM #
018554
DESC
SP
[email protected]
7200005 CUP BRUSH 2-1/2IN 80G
UOM
EA
A
PRICE
7.54
V.HCX
DESC
SP UOM PRICE
3.84
L.HYX
22019 END BRUSH CRIMP WIRE 3/4"D 1/4IN RD [email protected] EA
SHNK
A
HOT MAX MOUNTED CUP BRUSHES
Crimped wire. Carbon steel. 2-1/2" coarse wire, 1/4" hex
shank.
ITEM #
354619
DESC
22020 CUP BRUSH CRIMP WIRE 2-1/2" DIA
SP UOM
[email protected] EA
A
PRICE
3.96
L.AOX
HOT MAX CUP BRUSHES
Single row knotted wire. Carbon steel. 3" coarse wire,
5/8"-11NC arbor.
DICO 2-1/2" MANDREL MOUNTED CUP
BRUSH
ITEM #
354627
Nylon brushes have abrasive impregnated in them, so
are great for stripping paint, and removing rust,
corrosion & weld scale. Also for preparing plastic, fiberglass, and metal for
primer. Nyalox brushes last up to 10x longer than wire brushes - they hold
their shape and won't rust or shed bristles. As bristles wear, new abrasive is
exposed, renewing the brush. Ideal for working on large flat surfaces. Grit is
color coded. Gray-coarse, orange-medium and blue-fine. Made in USA.
ITEM #
018570
DESC
7200007 CUP BRUSH 2-1/2IN 240G
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
7.54
V.HCX
DESC
SP UOM PRICE
8.86
A
R.OZX
22021 CUP BRUSH COARSE 3INDIA 5/8IN-11NC [email protected] EA
HOT MAX CUP BRUSHES
Crimped wire. Carbon steel. 3" coarse wire. 5/8"-11NC
arbor.
ITEM #
356778
DESC
SP UOM PRICE
6.80
A
V.ARX
26060 CUP BRUSH CRIMP WIRE COARSE 3IN [email protected] EA
1-800-776-0976 NOVEMBER
2016
159
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Wire Brushes
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Wire Brushes
DICO 4" NYALOX FLAP BRUSH
VERMONT AMERICAN WIRE WHEEL BRUSH
Nylon brushes have abrasive impregnated in them, so are great
for stripping paint, and removing rust, corrosion & weld scale.
Also for preparing plastic, fiberglass, and metal for primer.
Nyalox brushes last up to 10x longer than wire brushes - they
hold their shape and won't rust or shed bristles. As bristles
wear, new abrasive is exposed, renewing the brush. 1/4 inch shank. 2,500 rpm
max. Ideal for working on edges, ends and trim. Grit is color coded. Graycoarse, orange-medium and blue-fine. Made in USA.
Uses only the highest quality wire available. Manufactured by
using advanced metering and flange crimping techniques for
balanced, true-running tools. Ideal for removing rust, scale, or
paint. Wire hardened and tempered for long life. Precision
balanced to eliminate vibration. 1/4" shank fits all drills. Valued
brand.
ITEM #
386758
7200033 FLAP BRUSH 4IN 80G
DESC
SP
[email protected]
386766
7200045 FLAP BRUSH 4IN 120G
[email protected]
386774
7200039 FLAP BRUSH 4IN 240G
[email protected]
UOM
CD
A
CD
A
CD
A
PRICE
9.56
E.YHX
9.56
E.YHX
9.56
E.YHX
ITEM #
332445
16788 WIRE WHEEL FINE 2IN
DESC
SP
[email protected]
323403
16787 WIRE WHEEL COARSE 2IN
[email protected]
301000
16789 WIRE WHEEL COARSE 2-1/2
[email protected]
301043
16792 WIRE WHEEL FINE 3IN
[email protected]
301027
16791 WIRE WHEEL COARSE 3IN
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
PRICE
3.95
L.VHX
3.63
L.LYX
4.48
L.ACX
4.99
O.CLX
4.49
L.ACX
VERMONT AMERICAN WIRE WHEEL
BRUSH
5/8" - 11 arbor. .020 wire. Heavy duty aggressive
cleaning. Industrial duty. Stringer Bead Knot.
ITEM #
334197
DESC
16835 WIRE WHEEL 4IN
SP
[email protected]
UOM
CD
A
PRICE
24.26
CE.OXZ
VERMONT AMERICAN WIRE WHEELS
BRUSHES
16797 WIRE WHEEL COARSE 4IN
DESC
SP
[email protected]
323438
16798 WIRE WHEEL FINE 4IN
[email protected]
30 piece display. Counter display contains 6 each of the
following: Circular wire brush with arbor 1/12", 2", 2-1/2",
3", dia. Circular wire cup brush 2" dia.
ITEM #
102695
Ideal for removing rust, scale, or paint. 1/2" arbor hole
for bench grinders.
ITEM #
323411
GREAT NECK WIRE WHEEL ASSORTMENT
UOM
CD
A
CD
A
DESC
WB30D ASST WHEEL WIRE 30PC
SP
[email protected]
UOM
DS
A
PRICE
84.82
VY.OEX
PRICE
5.52
O.VAX
5.73
O.EYX
VERMONT AMERICAN WIRE WHEEL
DICO 4" NYALOX WHEEL BRUSH
Ideal for removing rust, scale or paint. Brass-coated,
hardened steel wire reduces wire breakage for longer
life. Precision-balanced to eliminate vibration. 1/2" or
5/8" knockout arbor for bench grinders.
Nylon brushes have abrasive impregnated in them, so
are great for stripping paint, and removing rust,
corrosion & weld scale. Also for preparing plastic,
fiberglass, and metal for primer. Nyalox brushes last up
to 10x longer than wire brushes - they hold their shape and won't rust or shed
bristles. As bristles wear, new abrasive is exposed, renewing the brush. 1/4
inch shank. 2,500 rpm max. Ideal for getting into crevices and contours. Grit is
color coded. Gray-coarse, orange-medium and blue-fine. Made in USA.
ITEM #
332461
16800 WIRE WHEEL FINE 5IN
SP
[email protected]
323446
16801 WIRE WHEEL COARSE 6IN
[email protected]
332488
16802 WIRE WHEEL FINE 6IN
[email protected]
160
DESC
UOM
CD
A
CD
A
CD
A
PRICE
8.82
E.ROX
8.91
E.ROX
9.90
R.LCX
ITEM #
018481
DESC
7200036 WHEEL BRUSH 4IN 80G
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
9.16
E.HOX
www.wallacehardware.com
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Wire Brushes
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Wire Brushes
DICO 4" NYALOX WHEEL BRUSH
DICO 8-PIECE PREP DISC KIT
Nylon brushes have abrasive impregnated in them, so
are great for stripping paint, and removing rust,
corrosion & weld scale. Also for preparing plastic,
fiberglass, and metal for primer. Nyalox brushes last up
to 10x longer than wire brushes - they hold their shape and won't rust or shed
bristles. As bristles wear, new abrasive is exposed, renewing the brush. 1/4
inch shank. 2,500 rpm max. Ideal for getting into crevices and contours. Grit is
color coded. Gray-coarse, orange-medium and blue-fine. Made in USA.
Contains 1 of each: fine, medium & coarse prep discs,
flap wheels of 36, 80 & 120 grit, a buff-it and a stripper disc. Each are 2 inches.
Clamshell packaging.
ITEM #
018538
DESC
7200042 WHEEL BRUSH 4IN 240G
SP
[email protected]
UOM
EA
A
PRICE
9.16
E.HOX
DICO 4" NYALOX WHEEL BRUSH
Nylon brushes have abrasive impregnated in them, so
are great for stripping paint, and removing rust,
corrosion & weld scale. Also for preparing plastic,
fiberglass, and metal for primer. Nyalox brushes last up
to 10x longer than wire brushes - they hold their shape
and won't rust or shed bristles. As bristles wear, new abrasive is exposed,
renewing the brush. 1/4 inch shank. 2,500 rpm max. Ideal for getting into
crevices and contours. Grit is color coded. Gray-coarse, orange-medium and
blue-fine. Made in USA.
ITEM #
018503
DESC
7200048 WHEEL BRUSH 4IN 120G
SP
[email protected]
UOM
EA
A
PRICE
9.16
E.HOX
ITEM #
049999
ITEM #
386715
7200015 WHEEL BRUSH 3IN 80G
SP
[email protected]
386731
7200018 WHEEL BRUSH 3IN 240G
[email protected]
386723
7200021 WHEEL BRUSH 3IN 120G
[email protected]
7200025 END BRUSH 3/4IN 80G
DESC
SP
[email protected]
386790
7200029 END BRUSH 3/4IN 120G
[email protected]
386804
7200027 END BRUSH 3/4IN 240G
[email protected]
www.wallacehardware.com
UOM
CD
A
CD
A
CD
A
PRICE
5.71
O.EHX
5.71
O.EHX
5.71
O.EHX
PRICE
36.33
LZ.HCX
DESC
UOM
CD
A
CD
A
CD
A
PRICE
7.31
V.EHX
7.31
V.EHX
7.31
V.EHX
HOT MAX MOUNTED WIRE WHEEL
Crimped wire. Carbon steel. 1-1/2" coarse wire, 1/4" hex
shank.
354554
ITEM #
386782
UOM
EA
A
Nylon brushes have abrasive impregnated in them, so are great for
stripping paint, and removing rust, corrosion & weld scale. Also for
preparing plastic, fiberglass, and metal for primer. Nyalox brushes
last up to 10x longer than wire brushes - they hold their shape and
won't rust or shed bristles. As bristles wear, new abrasive is
exposed, renewing the brush. 1/4 inch shank. 2,500 rpm max. Ideal for getting
into crevices and contours. Grit is color coded. Gray-coarse, orange-medium
and blue-fine. Made in USA.
354546
Nylon brushes have abrasive impregnated in them, so are great
for stripping paint, and removing rust, corrosion & weld scale.
Also for preparing plastic, fiberglass, and metal for primer.
Nyalox brushes last up to 10x longer than wire brushes - they
hold their shape and won't rust or shed bristles. As bristles wear,
new abrasive is exposed, renewing the brush. 1/4 inch shank. 2,500 rpm max.
Ideal for spot work and getting into hard to reach areas. Grit is color coded.
Gray-coarse, orange-medium and blue-fine. Made in USA.
SP
[email protected]
DICO 3" NYALOX WHEEL BRUSH
ITEM #
354538
DICO 3/4" NYALOX END BRUSH
DESC
7500049 ABRASIVE WHEEL KIT
354589
DESC
22015 WIRE WHEEL CRIMP COARSE 1-1/2IND
1/4IN H22016 WIRE WHEEL CRIMPED COARSE 2IND
1/4IN HX SHK
22017 WIRE WHEEL CRIMP COARSE 3IND 1/4IN
HX SHK
22018 WIRE WHEEL CRIMPED FINE 3IND 1/4IN
HEX SHNK
SP UOM PRICE
[email protected] EA
3.41
A
L.VYX
[email protected] EA
3.67
A
L.RHX
[email protected] EA
4.55
A
O.LEX
[email protected] EA
4.06
A
L.YRX
HOT MAX WIRE WHEELS
Twist knot. Carbon steel. 4" twist knot with 5/8"-11NC
arbor.
ITEM #
356816
DESC
26086 WIRE WHEEL TWIST KNOT 4IN 5/8IN11NC ARBR
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
12.13
A
A.AVX
161
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Felt Bobs
DICO FELT BOB KIT
VERMONT AMERICAN BUFFING AND
POLISHING PAD
4 piece kit. 1/4 inch shaft assorted shapes in medium and hard
density. Great for woodworking, metal crafts, jewelry and fine detail
work. Sizes to fit all Dremel-style motors. Can be used on all
surfaces.
ITEM #
050016
DESC
SP
[email protected]
7500066 MM FELT BOB KIT 50-4PC
UOM
EA
A
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Buffing Wheels
PRICE
11.60
H.LEX
One full inch of prefectly balanced pile, with hi-polish's
unique round-up contour-long a favorite in auto and
marine finishing. Half virgin wool and half man-made
fiber, for use in compounding and buffing. Made for easy mounting on sanders
and polishers.
ITEM #
300853
DESC
SP
[email protected]
16904 BUFFING PAD 7IN
UOM
CD
A
PRICE
10.49
R.EZX
DICO PRODUCTS HARDFELT KIT
Available in hard & medium density Kit has 3 different
cylinders 2 conical 1 cone 2 olives clam shelled Use
with Dico compounds and rouges.
ITEM #
050008
DESC
7500077 MM HARD FELT KIT
SP
[email protected]
UOM
EA
A
PRICE
11.59
H.LVX
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Buffing Wheels
VERMONT AMERICAN MUSLIN
POLISHING BUFF
DESC
17542 BUFF MUSLIN 4IN
Includes flexible backer pad, polishing bonnet and
aluminum oxide sanding disc. 5" Diameter.
ITEM #
371483
DESC
SP
[email protected]
16983 POLISHING KIT 5IN
UOM
CD
A
PRICE
6.91
V.OHX
DICO SPIRAL SEWN BUFFING WHEEL
Ideal for buffing jewelry and other fine material.
Concentrically sewn sections for added strength. 1/2"
arbor hole fits most bench grinders.
ITEM #
371548
VERMONT AMERICAN POLISHING AND
SANDING KIT
SP
[email protected]
UOM
CD
A
PRICE
4.55
L.AOX
Coarse cutting action. Sewn in a continuous spiral from the
center to the face. Dependable, well-balanced, long wearing
wheels for general shop use. Carefully selected, high grade
cotton sheeting assembled to give maximum cutting action.
Blister pack. 1" hole size packaged with Dico toothed flanges for
1/2" spindle.
ITEM #
018104
DESC
7000146 SPIRAL BUFF 4IN MM
SP
[email protected]
UOM
EA
A
PRICE
8.00
E.XZZ
VERMONT AMERICAN BUFFER
The buffer heads the hi-polish product line with a
professional quality polishing unit. Durable and deep 1"
pile made of natural wool and synthetic fabric. Rounded
contours for precision balance. Attaches easily to 1/4",
3/8" and 1/2" standard power drills. Even after repeated
use, it cleans thoroughly in soap and water and retains its resilience for multipurpose applications.
Used for light cutting and coloring. A superior grade of
fine cotton sheeting held together with two or four circles of lock stitch
sewing. Gives a resilient, cushioned effect when in use. Blister pack. 1" hole
size package with Dico toothed flanges for 1/2" spindle.
ITEM #
300691
ITEM #
018317
7000149 CUSHION BUFF 4IN MM
SP
[email protected]
018341
7000186 CUSHION BUFF 6IN
[email protected]
162
DESC
16901 THE BUFFER 5-1/2IN
SP
[email protected]
UOM
CD
A
PRICE
10.49
R.LYX
DICO CUSHION SEWN BUFFING WHEEL
DESC
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
PRICE
7.54
V.HCX
7.54
V.HCX
www.wallacehardware.com
Hand & Power Tools
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Buffing Wheels
DICO FLANNEL BUFFING WHEEL
Power Saws, Blades and Accessories,
Circular Saws and Blades, Electric Circular
Saws
DEWALT 7-1/4" CIRCULAR SAW
For use with rouge to color gold, silver, and other precious
metals. Discs of soft flannel joined by two or four circles of
lockstitch sewing. Follows intricate contours easily and will not
scratch. Recommended for all final coloring operations. This
extra soft wheel will give you the most brilliant finish of all
buffs. Made of the finest combed flannel to create an extra soft nap.
Powerful 15 AMP AC/DC motor. Lightweight at 10.9 lbs.
Newly designed high strength, low friction, ribbed
aluminum shoe. 50 degree bevel capacity. Carbide saw
blade included.
ITEM #
061573
7000103 FLANNEL BUFF 4IN MM
SP
[email protected]
ITEM #
334235
061557
7000169 FLANNEL BUFF 6IN
[email protected]
DESC
UOM
EA
A
EA
A
PRICE
6.19
O.AHX
7.54
V.HCX
Power Sanders, Grinders and Accessories,
Wheels, Cups and Brushes, Backer Pads
VERMONT AMERICAN SANDING
ATTACHMENT
Consists of a flexible molded rubber backing pad and
1/4" arbor that fits all electric drills and polishers.
Designed to fit and properly support polishing bonnets
as well as abrasive sanding discs. Display packaged. 5".
ITEM #
309850
DESC
16986 BACKER PAD 5IN
SP
[email protected]
PRICE
4.29
L.REX
SP UOM PRICE
140.19
A
CLE.CHX
BLACK & DECKER 7-1/4" CIRCULAR SAW
Powerful 12 Amp motor ideal for most cutting
applications. Easy to use bevel adjustment allows for
accurate 0-45 degree angled cuts. Depth Adjustments
adjusts up to 2-5/16" at 90 degrees. Ergonomic handle for maximum comfort
and control. An 18 tooth carbide blade provides smooth and fast cutting ideal
for tough, everyday jobs.
ITEM #
329800
UOM
CD
A
DESC
DWE575 CIRCULAR SAW NEXT GEN 7-1/4IN [email protected] EA
DESC
CS1014 CIRCULAR SAW 12.0 7-1/4IN
SP
[email protected]
UOM
EA
A
PRICE
67.07
EY.AYX
PORTER CABLE 7-1/4" CIRCULAR SAW
15 AMP, 5600 RPM motor delivers power and torque
through the toughest applications. 9.5-pound
lightweight saw improves fatigue and user handling.
55-Degree bevel capacity with stops at 22.5 and 45-Degrees provide quick
and accurate bevel adjustments. Cast Magnesium shoe provides an accurate
and lightweight construction. Sturdy kit box provides a reliable solution for
storing the saw, blade, wrench and rip fence.
ITEM #
329622
VERMONT AMERICAN BACKER PAD
For use with abrasive discs and polishing bonnets.
Flexible rubber pad allows flat or contour sanding
without gouging. 1/4" shank arbor fits all drills
ITEM #
371475
DESC
16987 BACKER PAD 6IN
SP
[email protected]
SP UOM
[email protected] EA
A
PRICE
91.02
AC.LHX
SKIL/BOSCH 7-1/4" CIRCULAR SAW
UOM
CD
A
PRICE
5.35
O.OLX
15 amp motor. High strength composite footplate.
Powerful blower - bevel quadrant vents clears dust.
High strength and lightweight magnesium upper and
lower guards. Anti-snag lower guard. Adjustable bevel
and depth levers. High contract bevel and depth scales. Removable end cap
for easy, serviceable brushes. On-tool wrench storage. Fast and easy blade
changes. Heavy duty 22 amp switch. Includes 24 tooth carbide blade and
work bag.
ITEM #
210978
www.wallacehardware.com
DESC
PC15TCSM CIRCULAR SAW H-D 7-1/4IN
DESC
CS10 CIRCULAR SAW BOSCH 7-1/4IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
147.30
COC.ELX
163
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Electric Circular
Saws
Power Saws, Blades and Accessories,
Circular Saws and Blades, Electric Circular
Saws
SKIL 7-1/4" 2.3 HP CIRCULAR SAW
SKIL 7-1/4 IN. SKILSAW? WITH LASER
2 point line of site helps cut straight lines. Safety Lock
guarded trigger minimizes accidental starts. Patented
anti-snag lower guard. Rear view depth adjustment
quickly assures desired cut depth. Ergonomic front,
rear handles for comfort. 18 tooth carbide blade and blade wrench included.
5/8" round arbor, 7-1/4" blade diameter, 6 ft. cord length. 1-15/16" depth of cut
at 45 degree, and 2-7/16" at 90 degree. 3 speed. 4,600 No load RPM. 2.3 HP.
12A r
Laser Cutline Guide for accurate cuts. 51? Bevel Adjust
w/Positive Stop at 45 degrees for increased accuracy.
Power-on indicator lets you know when the tool is
plugged in. Safety Lock / Guarded Trigger minimizes
accidental starts. Wide foot plate for stability when
cutting. Anti-snag lower guard reduces snags when making narrow cut-offs.
Ball bearing motor construction for twice the life, compared to previous
model. Rear view depth adjustment for clear visibility & quick cut-depth
changes. On-tool wrench storage for quick and easy blade changes.
ITEM #
126160
DESC
SP
[email protected]
5480-01 CIRCULAR SAW 7-1/4IN
UOM
EA
A
PRICE
64.50
EH.EYX
ITEM #
445622
DESC
5680-02 SKILSAW 2.5HP 7-1/4IN/LASER 24T
BLADE
SP UOM PRICE
[email protected] EA
90.39
A
AX.HXZ
MAKITA 7-1/4" CIRCULAR SAW
15 AMP heavy duty hi-tech motor; 5,800 RPM. Cuts 23/8" at 90 degrees and 1-3/4" at 45 degrees. Comes
with complete carbide tipped blade. Heavy gauge
aluminum wrap-around base. Shaft lock for easy blade
replacement with one wrench.
SKIL 7-1/4" CIRCULAR SAW
Powerful 2-1/8 HP, 10.0 amps motor. Lateral lock off
button. Blade wrench storage. Built-in scales and
cutting guide. Zero adjust foot plate. Double insulated.
6 foot 2-wire cord and plug. Includes: super sharp hard
tooth combination blade and blade wrench.
ITEM #
302015
DESC
SP
[email protected]
5580-01 CIRCULAR SAW 7-1/4IN
ITEM #
303879
UOM
EA
A
PRICE
75.68
RH.EHX
DESC
5007F CIRCULAR SAW 7-1/4IN
SP
[email protected]
UOM
EA
A
PRICE
149.34
COZ.OVX
SKIL SAWSQUATCH WORM DRIVE SAW
WITH DIABLO BLADE
Largest Dual-Field motor uses a unique copper winding pattern resulting in
increased surface area that keeps the motor cooler. Magnesium components
decrease the weight while increasing durability. Well-balanced design for easy
handling. Includes a Freud Diablo 40T carbide blade.
ITEM #
455202
DESC
SP UOM
SPT70WM-22 WORM DRIVE SAW 10-1/4IN [email protected] EA
A
PRICE
408.70
OHC.EZX
SKIL 7-1/4" CIRCULAR SAW
15 amps provides power to cut through 3/4" plywood
and other dense materials. Left blade design gives
users the clearest line of sight for easy, accurate
cutting. Improved spindle lock allows for quick and
easy blade change. Magnesium upper and lower guard. On-tool wrench
storage. Clear viewing area of cut line. Anti-snag lower guard will not hang up
when making bevel cuts. Includes 24 tooth carbide blade, blade wrench. 5/8"
arbor size. 9 ft. cord. 10 lbs.
SKIL SIDEWINDER MAGNESIUM
CIRCULAR SAW
ITEM #
037281
ITEM #
455199
164
DESC
CS5 CIRCULAR SAW 7-1/4IN
SP
[email protected]
UOM
EA
A
PRICE
147.30
COC.ELX
7-1/4 inch all magnesium saw with magnesium motor
housing stabilizes drive train. Best-in-class torque improves productivity and
speed of cut. Dual-Field motor is especially designed for saws by providing
increased cooling to extend tool life. Dust blower clears the line of cut for
increased accuracy. 15 amp. 24T blade.
DESC
SPT67WM-22 MAGNESIUM CIRCULAR SAW
7-1/4IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
147.10
A
COC.OVX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Electric Circular
Saws
SKIL PROFESSIONAL SIDEWINDER
CIRCULAR SAW
DESC
SP UOM PRICE
120.65
CXH.HCX
SPT67W-01 PROFESSIONAL CIRCULAR SAW- [email protected] EA
LT WT 15AMP
A
SKIL MAGNESIUM SIDEWINDER
CIRCULAR SAW
Lightest weight professional circular saw in its class at 8.6 lbs. 56 degree
bevel with positive stop at 45 degree allows you to complete a variety of cuts.
15 amp motor ensures power for demanding cuts. Dual-Field motor dissipates
heat, allowing the motor to stay cool and last longer. 10 foot cord minimizes
hanging on sheet materials.
ITEM #
472735
SKIL CIRCULAR SAW RIP FENCE
For circular saw models: #5510, #551, #534, #574, #576,
#559, #5125, #5150, #5250 and #5350.
15 amp. 7-1/4 inch magnesium Sidewinder circular saw.
8.6 lbs. 56 degree bevel with positive stop at 45 degrees. Dual-Field motor
dissipates heat allowing the motor to stay cool and last longer. 10 ft. cord
minimizes hanging on sheet materials.
ITEM #
455210
Power Saws, Blades and Accessories,
Circular Saws and Blades, Rip Fences
DESC
SP UOM PRICE
[email protected] EA
133.27
A
CLC.CEX
SPT67WL-01 SIDEWINDER SAW 7-1/4IN
15AMP
ITEM #
374822
SP
[email protected]
UOM
EA
A
PRICE
8.82
E.ECX
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
DEWALT 7-1/4" 24T FRAMING CARBIDE
THIN KERF CIRCULAR SAW BLADE
Tougher tungsten carbide stays sharper longer.
Specially formulated anti-stick coating minimizes
friction and gum-up for smoother cuts. Thin kerf for fast
and smooth cutting action. Ribbed heat vents allow
blade to run cooler, reducing blade flexing and binding. All blades feature 5/8inch arbor with diamond knock-out.
ITEM #
232831
ROCKWELL COMPACT CIRCULAR SAW
DESC
95100 RIP FENCE CIRCULAR SAW
DESC
DW3578B10 CIRCULAR SAW BLADE 7-1/4IN
24T
SP UOM PRICE
[email protected] EA
8.40
A
H.EXZ
4-1/2". Includes: (1) Compact circular saw, (1) 24T
Carbide-tipped blade, (1) parallel guide, (1) vacuum
adapter and (1) hex key.
ITEM #
111575
DESC
RK3441K COMPACT CIRCULAR SAW
SP
[email protected]
UOM
EA
A
PRICE
116.62
YO.OXZ
Power Saws, Blades and Accessories,
Circular Saws and Blades, Cordless Circular
Saws
BLACK & DECKER CIRCULAR SAW
Flexible - power of corded. Freedom of cordless. The
world's first battery that automatically changes voltage
when you change tools. 7-1/4" full size blade for corded
capacity. Electronic brake stops the blade after trigger
is released. Bevel cut capacity up to 57 degrees with
stops at 22.5 and 45. Brushless motor is maximized for run time and durability;
5800 RPM for quality cuts with speed.
ITEM #
329565
*
NEW
DESC
DCS575T1 FLEXVOLT 60V CIRCULAR
SAW 1 BATT KIT
www.wallacehardware.com
VERMONT AMERICAN "KROME KING"
CUTOFF/RIP CIRCULAR SAW BLADES
The most popular combination blade style for allpurpose cutting. Crosscuts, rips and miters all woods at
moderate cutting speed and smoothness of cut. 5/8"
arbor. Steel circular saw blades.
ITEM #
370061
25227 SAW BLADE CUTOFF 6-1/2IN 36T
DESC
370126
25230 SAW BLADE CUTOFF 7-1/4IN 40T
370150
25233 SAW BLADE CUTOFF/RIP 8IN 44T
380326
25235 SAW BLADE CUTOFF/RIP 9IN 44T
380334
25236 SAW BLADE CUTOFF/RIP10IN 44T
SP UOM
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
PRICE
9.68
R.CXZ
9.50
R.XHX
11.40
H.LRX
12.09
H.RVX
16.45
CX.ELX
SP UOM PRICE
[email protected] KT
346.75
A
OXY.EYX
1-800-776-0976 NOVEMBER
2016
165
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
VERMONT AMERICAN STANDARD
CUTOFF/RIP STEEL CIRCULAR SAW
BLADES
VERMONT AMERICAN CARBIDE
CIRCULAR SAW BLADES
Fast cut, chisel tooth. Workhorse of the construction
trade. Crosscuts and rips in solid wood, plywood,
particle board, chipboard and other heavy-duty sawing.
5/8" Arbor.
Super sharp edges for quality cuts. Made from highquality steel, hardened and tempered for long life.
Easily resharpened. 5/8" Arbor.
ITEM #
371750
DESC
26492 SAW BLADE 7-1/4IN 40T
SP
[email protected]
UOM
EA
A
PRICE
3.89
L.VEX
VERMONT AMERICAN 7-1/4" 24T FASTCUT RIP CARBIDE CIRCULAR SAW
BLADE
ITEM #
374008
27167 SAW BLADE 6-1/2IN 20T
DESC
SP
[email protected]
333557
26482 SAW BLADE 7-7-1/4IN 16T
[email protected]
371637
27170 SAW BLADE 7-1/4IN 20T
[email protected]
347388
26484 SAW BLADE 7-1/4IN 20T
[email protected]
114588
27191 SAW BLADE CIRCULAR 7-1/4 24T
[email protected]
374024
27173 SAW BLADE 8IN 20T
[email protected]
314498
27175 SAW BLADE 9IN 28T
[email protected]
374032
27176 SAW BLADE 10IN 28T
[email protected]
340790
27196 FRAMING SAW BLADE10IN X 40T
[email protected]
UOM
CD
A
EA
A
CD
A
EA
A
CD
A
CD
A
CD
A
CD
A
CD
A
PRICE
14.35
Y.XZZ
8.00
E.CRX
9.54
E.YRX
7.65
V.AHX
9.36
E.AHX
13.77
A.AZX
24.82
CE.RYX
23.33
CV.HOX
23.90
CV.YAX
Workhorse of the construction trade. Crosscuts and
rips in solid wood, plywood, particle board, chipboard
and other heavy-duty sawing. ATB tooth grind. For frame and crosscut cutting.
7,900 maximum RPM. 5/8-inch round diamond arbor.
ITEM #
399078
DESC
26491 SAW BLADE 7-1/4IN 24T
SP
[email protected]
UOM
EA
A
PRICE
7.24
V.EOX
VERMONT AMERICAN "LASER X2"
CARBIDE-TIPPED CIRCULAR SAW
BLADES
Unique V-face tooth design provides twice the cutting
points for less splintering and finer finish. Cuts as fast
as a 20-tooth and smooth as a 40-tooth. Stable and true running. Crosscut and
rip in solid wood, plywood, particle board and chipboard. 5/8" Arbor.
ITEM #
340758
VERMONT AMERICAN CARBIDE
CIRCULAR SAW BLADES
DESC
26930 SAW BLADE 7-1/4IN 20T
SP
[email protected]
UOM
CD
A
PRICE
16.33
CX.OZX
5/8" Arbor. Smooth cut combination blade. Dyanite
Carbide lasts up to 5X longer. Fully hardened body
adds stability and eliminates distortion and bending.
Large tips provide longer life and more resharpenings. Precision sharpened
and balanced.
ITEM #
314544
166
DESC
27256 SAW BLADE 10IN 40T
SP
[email protected]
UOM
CD
A
PRICE
53.94
OV.XYX
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
VERMONT AMERICAN TITANIUM 10X
CIRCULAR SAW BLADE
VERMONT AMERICAN "KROME KING"
MASTER COMBINATION CIRCULAR SAW
BLADES
Titanium Carbide teeth provide exceptional hardness
and durability. Up to 100 times more durable than
conventional carbide blades. Diamond grit wheel
sharpened teeth are up to 3 times sharper than
conventional teeth. 600 grit diamond wheel sharpened. Clear anti-stick
coating, reduces friction and binding. Thin kerf plate provides minimal weight
and blade resistance. "J" shaped expansion slots control heat around the
perimeter. Round
ITEM #
165913
27815 BLADE TITANIUM 7-1/4IN 18T
DESC
SP
[email protected]
347094
27817 BLADE TITANIUM 7-1/4IN 24T
[email protected]
310352
27818 BLADE TITANIUM 7-1/4IN 24T
[email protected]
165921
27821 BLADE TITANIUM 7-1/4IN 40T
[email protected]
168300
27823 BLADE TITANIUM 8-1/4IN 24T
[email protected]
165948
27829 BLADE TITANIUM 10IN 24T
[email protected]
168319
27831 BLADE TITANIUM 10IN 40T
[email protected]
165964
27833 BLADE TITANIUM 10IN 60T
[email protected]
168343
27838 BLADE TITANIUM 12IN 60T
[email protected]
165972
27839 BLADE TITANIUM 12IN 80T
[email protected]
347221
27819 BLADE TITANIUM7-1/4IN 24T
[email protected]
UOM
CD
A
CD
A
EA
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
EA
A
PRICE
14.28
Y.XZZ
14.09
Y.XZZ
13.40
A.REX
23.91
CE.VXZ
23.24
CE.XZZ
33.49
LC.VXZ
39.10
LV.RAX
52.30
OZ.VOX
67.65
VO.ERX
78.64
EX.XVX
13.69
A.REX
Smoothest cutting combination blade style. Crosscuts,
miters and rips in all woods. Cuts smoother and slightly
slower but runs cooler than other combination styles. The best combination
blade choice for smooth crosscuts. 5/8" arbor.
ITEM #
369837
25207 SAW BLADE COMB 6-1/2IN 48T
DESC
SP
[email protected]
369896
25213 SAW BLADE COMB 8IN 48T
[email protected]
314455
25215 SAW BLADE COMB 9IN 64T
[email protected]
314463
25216 SAW BLADE COMB 10IN 64T
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
PRICE
10.53
R.RZX
13.25
A.OHX
16.70
CX.ERX
15.38
Y.AVX
UOM
CD
A
PRICE
9.63
R.CRX
VERMONT AMERICAN CIRCULAR SAW
BLADES
"Krome King". Special Purpose. Crosscut. For cutting
across the grain on all woods under 1-1/4". 5/8" arbor.
ITEM #
370398
DESC
25290 SAW BLADE CROSCUT 7-1/4
SP
[email protected]
VERMONT AMERICAN CIRCULAR SAW
BLADES
VERMONT AMERICAN CIRCULAR SAW
BLADES
Micro edge technology combines scalpel sharp teeth
with a micro kerf. Cuts with less drag and resistance
than standard circular saw blades. 13/32"/10mm Round
Arbor, 10,400 Max Rpm.
ITEM #
151408
151084
151076
DESC
26121 SAW BLADE 5-3/8IN 18T
26152 SAW BLADE CARBIDE 61/2IN 24T
26151 SAW BLADE CARBIDE 61/2IN 18T
www.wallacehardware.com
INFO
13/32"/10M
M ROUND
ARBOR
5/8" ROUND
ARBOR
5/8" ROUND
ARBOR
SP UOM PRICE
[email protected] CD 17.28
A
CZ.XZZ
[email protected] CD
A
[email protected] CD
A
22.53
CV.LXZ
19.67
CL.VZX
"Krome King". Smooth, clean-cutting on plywood,
paneling and veneer 3/4" and under. Less splintering
than combination style blades. Also for cutting Celotex
and plastics. 5/8" arbor.
ITEM #
369926
25267 SAW BLADE PLYWOOD 6-1/2 150T
DESC
369950
25270 SAW BLADE PLYWOOD 7-1/4IN 150T
314471
25273 SAW BLADE PLYWOOD 8IN 200T
388653
25276 SAW BLADE PLYWOOD 10IN 200T
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] CD
10.15
A
R.VYX
[email protected] CD
10.08
A
R.OXZ
[email protected] CD
12.51
A
H.YHX
[email protected] CD
16.70
A
CX.HZX
167
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
VERMONT AMERICAN CIRCULAR SAW
BLADES
VERMONT AMERICAN DIAMOND
ABRASIVE SAW BLADE
"Krome King". Thin Rim. Plywood/Paneling. Makes
satin smooth finish cuts in plywood, paneling and
veneers 3/4" and under. Also for laminates and
Plexiglass used in cabinets, furniture and other fine
work. Practically eliminates splintering and the need for sanding. 5/8" arbor.
Lasts longer and cuts faster than standard abrasive
blades. Cuts more materials.
ITEM #
306843
DESC
25350 SAW BLADE PLYWD 7-7-1/4IN 200T
SP UOM
[email protected] CD
A
26131 BLD CARB 18T 51/2IN10MM
ITEM #
245658
INFO
13/32"/10MM ROUND
ARBOR
SP UOM PRICE
[email protected] CD 17.29
A
CZ.CRX
272728
272736
189588
VERMONT AMERICAN
566705
Super sharp edges for quality cuts. Made from high
quality steel, hardened and tempered for long life.
Easily resharpened. 5/8" arbor."
189677
DESC
SP
UOM PRICE
4.45
A
L.HYX
26494 PLYWOOD SAW BLADE 7-1/4IN 150T [email protected] EA
Finest alloy steel, heat treated and tempered and
tempered for long life. Precision-sharpened teeth for
smooth, fast cuts. For cutting by friction in corrugated
sheet roofing, black iron, furnace pipe and steel bar
stock. Not designed for cutting aluminum, brass, copper or other nonferrous
metals. 5/8" ARBOR.
168
DESC
25306 SAW BLADE STL CTR 7-1/4IN 18T
PRICE
23.49
CV.AEX
DESC
14015 SAW BLADE 5-3/8IN 20TPI
FRAMING/RIPPING
14017 SAW BLADE 5-3/8IN 24TPI
FRAMING/RIPPING
14027 SAW BLADE 5-1/2IN 18TPI
FRAMING/RIPPING
14020 SAW BLADE 6-1/2IN 18TPI
FRAMIING/RIPPING
14029 SAW BLADE 6-1/2IN 24TPI
FRAMING/RIPPING
14130 SAW BLADE 7-1/4IN 24TPI - DECK
BLADE
14053 SAW BLADE 8-1/4IN 40TPI F/TRIM &
FINISH
SP UOM PRICE
[email protected] CD 16.08
A
CX.HLX
[email protected] CD 17.72
A
CL.XRX
[email protected] CD 16.08
A
CX.HLX
[email protected] CD 17.08
A
CZ.OAX
[email protected] CD 17.47
A
CZ.REX
[email protected] CD 18.91
A
CL.RCX
[email protected] CD 35.57
A
LV.CAX
IRWIN "MARATHON" PORTABLE PRO
SAW BLADES
Every other tooth is thinner for faster cuts. Construction
grade carbide teeth for long life. Reinforced shoulder
for added durability. Heat vent & expansion slot design
reduces vibration for longer life and straighter cuts.
VERMONT AMERICAN KROME KING
STEEL CUTTER CIRCULAR SAW BLADES
ITEM #
322563
UOM
EA
A
Ultra thin kerf for more cuts per charge. Face ground
carbide teeth for fast, clean cuts. Aggressive hook angle
for fast cuts. Construction grade carbide teeth for longer
life.
390267
ITEM #
321885
SP
[email protected]
IRWIN "MARATHON" SAW BLADE
Micro edge technology combines scalpel sharp teeth
with a micro kerf. Cuts with less drag and resistance
than standard circular saw blades. 13/32"/10mm Round
Arbor, 10400 Max Rpm, 18 Scalpel Sharp Teeth, Narrow
Blade Kerf.
DESC
DESC
29277 SAW BLADE DIAMOND 7IN
PRICE
14.40
Y.LCX
VERMONT AMERICAN MICRO EDGE
SAW BLADES
ITEM #
306894
ITEM #
162612
SP
[email protected]
UOM
CD
A
PRICE
11.16
H.XEX
ITEM #
287911
326615
398136
390283
596515
DESC
24021 SAW BLADE 6-1/2IN 20TPI
FRAMING/RIPPING
14028 SAW BLADE 7-1/4IN 18TPI
FRAMING/RIPPING
14030 SAW BLADE 7-1/4IN 24TPI
FRAMING/RIPPING
24030 SAW BLADE 7-1/4IN 24TPI
FRAMING/RIPPING
14031 SAW BLADE 7-1/4IN 40TPI F/TRIM &
FINISH
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
16.99
A
CZ.LOX
[email protected] CD 15.24
A
CX.ORX
[email protected] CD 14.57
A
Y.HLX
[email protected] EA
6.85
A
E.LVX
[email protected] CD 27.79
A
CA.EOX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
IRWIN "MARATHON" LARGE DIAMETER
SAW BLADES
IRWIN "SPRINT" SAW BLADES
For general purpose use when crosscutting and
trimming in all woods, paneling, plywood and
chipboard. Alternate top bevel grind. 5/8" ARBOR.
Teeth are ground with #400 grit diamond for a smooth
finish cut. Construction grade carbide teeth for longer
life. Precision balanced for accurate smooth cuts. Thin
kerf for fast cuts and longer motor life.
ITEM #
398055
398144
326712
164666
272787
326763
210544
122084
249270
DESC
14050ZR SAW BLADE 8-1/4 24TPI GENERAL
PURPOSE
14070 SAW BLADE 10IN 40TPI GENERAL
PURPOSE
14074 SAW BLADE 10IN 60TPI F/TRIM &
FINISH
14233 SAW BLADE 10IN 24TPI
FRAMING/RIPPING
14076 SAW BLADE 10IN 80TPI F/TRIM &
FINISH
14080 SAW BLADE 12IN 40TPI GENERAL
PURPOSE
14082 SAW BLADE 12IN 72TPI F/TRIM &
FINISH
14083 SAW BLADE 12IN 80TPI F/TRIM &
FINISH
14084 SAW BLADE 12IN 100TPI F/TRIM &
FINISH
SP UOM PRICE
[email protected] CD 21.79
A
CV.EOX
[email protected] CD 36.55
A
LV.OHX
[email protected] CD 58.84
A
OY.LOX
[email protected] CD 33.28
A
LZ.CAX
[email protected] CD 76.73
A
EC.CEX
[email protected] CD 58.63
A
OY.XYX
[email protected] CD 77.79
A
EC.ARX
[email protected] CD 84.73
A
ER.VYX
[email protected] CD 96.41
A
RV.LHX
299278
299162
570990
396583
299170
299189
299286
396605
DESC
UOM
EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
[email protected] EA
A
15230ZR SAW BLADE 7-1/4IN 40TPI F/WOOD [email protected] EA
A
15530ZR SAW BLADE 7-1/4IN 60TPI F/WOOD [email protected] EA
A
15070 SAW BLADE 10IN 24TPI CLASSIC
[email protected] EA
F/WOOD
A
15370 SAW BLADE 10IN 60TPI CLASSIC
[email protected] EA
F/WOOD
A
SP
[email protected]
PRICE
10.20
R.YVX
14.11
Y.RVX
7.57
E.CEX
7.57
E.XEX
5.92
O.YEX
12.64
A.VLX
20.00
CO.RXZ
17.70
CL.XVX
35.42
LV.XYX
DESC
SP UOM PRICE
12.93
A
A.RLX
15702ZR SAW BLADE 7-1/4IN 6T FIBER CEMENT [email protected] EA
IRWIN WELDTEC SAW BLADE
7-1/4" saw blade with Carbide teeth are welded not
brazed. 30% stronger tooth bond. Longest life and
durability. Patent pending tooth design. Every other
tooth is ground thinner for fast cuts. 5/8" Arbor.
ITEM #
117269
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
25.29
A
CR.ARX
IRWIN "FIBERCUT" SAW BLADE
ITEM #
178608
Irwin classic saw blades. Precision ground teeth for
smooth, accurate cuts. Corrosion resistant coating
helps prevent rusting. Professional performance for an
economic price.
15120 SAW BLADE 6-1/2IN 24TPI CLASSIC
F/WOOD
15220 SAW BLADE 6-1/2IN 30TPI CLASSIC
F/WOOD
15030 SAW BLADE 7-1/4IN 16TPI CLASSIC
F/WOOD
15130 SAW BLADE 7-1/4IN 24TPI CLASSIC
F/WOOD
25130 SAW BLADE 7-1/4IN 24TPI WOOD
DESC
15270 SAW BLADE 10IN 40TPI CLASSIC
F/WOOD
Designed for cutting single sheet fiber cement board.
C4 Carbide tips for maximum cutting life. 6-tooth blade
cutting concept ideal for single board cutting. Unique
shoulder design for consistent chip removal. Square top
tooth grind for heavy-duty cutting. Hardened and
tempered blade body for longer life.
IRWIN "SPRINT" SAW BLADE
ITEM #
299251
ITEM #
396591
DESC
SP
UOM PRICE
15.91
CX.RCX
24035 SAW BLADE MTH 7-1/4IN 24T WELDED [email protected] EA
CRB
A
1-800-776-0976 NOVEMBER
2016
169
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
IRWIN STEEL CIRCULAR SAW BLADES
IRWIN 12" 60T MARPLES MITER/TABLE
WOODWORKING SAW BLADE
Precision ground teeth for smooth, accurate cuts.
Heavy gauge, high carbon steel for extended life.
Chisel Tooth Combination: 5/8" Diamond Arbor.
ITEM #
272779
272752
272760
272744
119040
272795
272809
272817
DESC
INFO
11040ZR SAW BLADE CHISEL TOOTH
7-1/4IN 26TPI STEEL COMBINATION: 5/8"
DIAMOND ARBOR"
11140 SAW BLADE 7- STANDARD
1/4IN 40TPI
COMBINATION; 5/8"
STANDARD -STEEL
DIAMOND ARBOR"
11240 SAW BLADE 7- MASTER COMBINATION;
1/4IN 60TPI MASTER - 5/8" DIAMOND ARBOR"
STEEL
11840 SAW BLADE 71/4IN 140TPI
PLYWOOD/OSB/PLS
11830 VINYL SIDING
SAW BLADE 7-1/4IN
120TPI
11170 SAW BLADE
10IN 40TPI
STANDARD- STEEL
11270ZR SAW BLADE
10IN 80TPI MASTERSTEEL
11870 SAW BLADE
10IN 180TPI
PLYWOOD/OSB/PLS
SP UOM PRICE
[email protected] CD 3.92
A
L.RZX
[email protected] CD
A
3.65
L.VAX
[email protected] CD
A
8.92
E.YEX
[email protected] CD
A
6.57
V.OAX
[email protected] CD
A
11.63
H.YLX
[email protected] CD
A
11.70
H.AVX
[email protected] CD
A
11.82
H.AZX
PLYWOOD/OSB/VENEER/P [email protected] CD
LASTIC; 5/8" ARBOR"
A
11.99
H.YZX
PLYWOOD/OSB/VENEER/P
LASTIC; 5/8" DIAMOND
ARBOR"
STANDARD
COMBINATION; 5/8"
ARBOR"
STANDARD
COMBINATION; 5/8"
ARBOR"
MASTER COMBINATION;
5/8" ARBOR"
1" arbor. 10? hook, fine cross-cutting blade. Extrasharp, oversized carbide teeth are re-sharpenable for
long life. Precision tensioned for flawless cuts. Heatresistant, non-stick coating reduces gummimg for easy
cleanup and truer, clearer cuts.
ITEM #
081167
081434
DESC
1807383 TABLE SAW BLADE MARPLES 60T
12IN
1807384 TABLE SAW BLADE MARPLES 80T
12IN
SP UOM PRICE
[email protected] CD 79.19
A
EO.AEX
[email protected] CD 92.14
A
RO.AZX
IRWIN FIBER CEMENT CIRCULAR SAW
BLADE
Polycrystalline Diamond tipped teeth provides up to 15
times longer life compared to standard carbide fiber
cement blade. Less dust.
ITEM #
366501
DESC
4935473 SAW BLADE 7-1/4 4TPI PCD FIBER
CEMENT
SP UOM PRICE
[email protected] EA
67.24
A
VZ.CYX
IRWIN METAL CUTTING CIRCULAR SAW
BLADE
For ferrous steel. Durable metal cutting carbide tips for
a smooth and fast cut. Designed to reduce wear,
withstand impacts and provide longer life. Stabilized for
smooth and accurate cuts. Anti-kickback design
reduces dust and sparks for a safer cut. Diamter: 7-1/4" Arbor diam: 5/8". 48T.
IRWIN 10" 40T MARPLES MITER/TABLE
WOODWORKING SAW BLADE
5/8" arbor. 15? hook, general purpose blade. Extrasharp, oversized carbide teeth are re-sharpenable for
long life. Precision tensioned for flawless cuts. Heatresistant, non-stick coating reduces gummimg for easy cleanup and truer,
clearer cuts.
ITEM #
081116
081124
081159
DESC
1807367 TABLE SAW BLADE MARPLES 40T
10IN
1807369 TABLE SAW BLADE MARPLES 60T
10IN
1807370 TABLE SAW BLADE MARPLES 80T
10IN
SP UOM PRICE
[email protected] CD 57.23
A
OA.YLX
[email protected] CD 70.18
A
VH.XVX
[email protected] CD 86.72
A
EA.COX
ITEM #
366455
SP UOM PRICE
47.52
OC.LOX
IRWIN METAL CUTTING CIRCULAR SAW
BLADE
For thin steel. The durable metal cutting carbide tips
are designed for a smooth and fast cut. Designed to
reduce wear, withstand impacts and provide longer life.
Stabilized for smooth and accurate cuts. Anti-kickback
design reduces dust and sparks for smooth and safer cut. 10", 5/8" arbor.
ITEM #
366528
170
DESC
4935555 CUTTING BLADE 7-1/4 48T FERROUS [email protected] EA
STEEL
A
DESC
4935561 BLADE 10IN 80T COMB FERROUS
STEEL 5/8IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
82.53
A
EZ.OLX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
IRWIN FIBER CEMENT CIRCULAR SAW
BLADE
OMEGA 14" SEGMENTED DIAMOND
BLADE
Polycrystalline Diamond tipped teeth provides up to 15
times longer life compared to standard carbide fiber
cement blade. Less dust.
Provides best cutting performance, faster cutting
speed and better blade life for cutting of block, brick,
refractory, concrete, paver and stone. 1 in.-20mm
arbor. For use on high speed saw and walk behind
saw. Wet or dry cutting. Max RPM 5,500.
ITEM #
366498
DESC
SP UOM PRICE
[email protected] EA
107.57
A
HL.CZX
4935624 SAW BLADE 6TPI PCD FIBER
CEMENT
ITEM #
049565
DESC
MP14 SEGMENTED DIAMOND BLADE
(CONCRETE)14IN
SP UOM PRICE
[email protected] EA
85.59
A
EO.VYX
OMEGA 10 IN. CONTINUOUS RIM
DIAMOND BLADE
Provides best cutting performance, faster cutting
speed and better blade life for cutting of ceramic tile,
porcelain tile, marble and granite. 5/8 arbor. For use on
tile saw. Wet cutting. Max RPM 6,100.
ITEM #
049549
DESC
CT10 TILE DIAMOND BLADE 10IN
SP
[email protected]
UOM
EA
A
PRICE
43.49
LH.CAX
Provides best cutting performance, faster cutting
speed and better blade life for cutting of brick, block,
refractory, concrete, paver and stone. 7/8-20mm-5/8
arbor. For use with angle grinder. Wet or dry cutting.
Max RPM 15,000.
OMEGA 4" CONTINUOUS RIM DIAMOND
BLADE
Provides best cutting performance, faster cutting
speed and better blade life for cutting of ceramic tile,
marble and granite. 7/8-20mm-5/8 arbor. For use on
angle grinder and small tile saw. Wet or dry cutting.
Max RPM 15,000.
ITEM #
049166
CT40 TILE DIAMOND BLADE 4IN
DESC
SP
[email protected]
049131
CT45 TILE DIAMOND BLADE 4.5IN
[email protected]
049263
CT70 TILE DIAMOND BLADE 7IN
[email protected]
OMEGA 4" SEGMENTED DIAMOND
BLADE
UOM
EA
A
EA
A
EA
A
ITEM #
048127
MP40 SEGMENTED DIAMOND BLADE 4IN
DESC
048550
MP45 SEGMENTED DIAMOND BLADE 4.5IN
049085
MP70 SEGMENTED DIAMOND BLADE 7IN
SP UOM PRICE
[email protected] EA
8.59
A
E.OHX
[email protected] EA
10.75
A
R.HLX
[email protected] EA
18.99
A
CZ.AHX
PRICE
8.59
E.OHX
10.75
R.HLX
18.99
CZ.AHX
OMEGA 14" EMERGENCY CUT-OFF
BLADE
OMEGA 10" SEGMENTED DIAMOND
BLADE
Provides best cutting performance, faster cutting
speed and better blade life for cutting of brick, block,
refractory, concrete, paver and stone. 7/8-5/8 arbor.
For use on Masonry saw and tile saw. Wet or dry cutting. Max RPM 6,100.
1"-20mm arbor. 5,460 max RPM. Dry/wet cutting. Used
for cutting metals, ductile iron, wood, PVC, masonry
and building materials. Ideal for emergency and
demolition work. Extremely fast cutting. Innovative
vacuum braze technology for maximum cutting performance.
ITEM #
049115
ITEM #
049638
DESC
MP10 SEGMENTED BLADE 10IN
www.wallacehardware.com
SP
[email protected]
UOM
EA
A
PRICE
53.16
OZ.LOX
DESC
SP UOM
MRC14 EMERGENCY CUT-OFF BLADE 14IN [email protected] EA
1-800-776-0976 NOVEMBER
2016
A
PRICE
206.75
CLY.LZX
171
Hand & Power Tools
Power Saws, Blades and Accessories,
Circular Saws and Blades, Circular Saw
Blades
OMEGA 4" DIAMOND TURBO BLADE
ITEM #
047228
TB40 TURBO DIAMOND BLADE 4IN
SP
[email protected]
047597
TB45 TURBO DIAMOND BLADE 4.5IN
[email protected]
047600
TB70 TURBO DIAMOND BLADE 7IN
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
8.59
E.OHX
10.75
R.HLX
18.99
CZ.AHX
DISSTON REMGRIT 7" CARBIDE GRIT
CIRCULAR SAW BLADE
1/2"-5/8" arbor size. Medium Grit, 178mm. Blades cut
extremely hard abrasive materials. The cutting edge of
tungsten carbide particles bonded to alloy steel back.
The blade has high heat and abrasion resistance, no
teeth to dull or chip resists snagging smooth cutting greater wear resistance.
Dimension: 0.01 x 0.01 x 8.5 in. Item weight - 0.56 lbs.
ITEM #
523682
DESC
GC700 CIRCULAR SAW BLADE -MEDIUM GRIT
7IN
SP UOM PRICE
[email protected] EA
99.24
A
RZ.CRX
Power Saws, Blades and Accessories,
Jigsaws and Blades, Electric Jigsaws
DEWALT HEAVY DUTY JIGSAW KIT
DESC
SP UOM PRICE
DW317K VS ORBITAL JIGSAW KIT 4.5AMPS [email protected] EA
124.81
A
CZZ.VOX
SKIL VARIABLE SPEED CORDED JIGSAW
172
DESC
4395-01 JIGSAW VSB SPEED 5.5AMP
DESC
SP UOM PRICE
[email protected] EA
62.56
A
EZ.ARX
4495-02 ORBITAL JIGSAW W/LASER VAR
SPEED 6AMPS
SKIL BOSCH 120-VOLT TOP-HANDLE
JIGSAW KIT
120-Volt Top-Handle Jigsaw features a precisionmachined plunging mechanism for enhanced accuracy
and a low-vibration design for smooth operation. This
powerful 6.5-amp jigsaw comes equipped with an ergonomic top handle and
a two-finger trigger to provide versatility and comfort. It offers four orbital
settings and varied cutting capacities for wood, aluminum, and steel. For
added convenience, it includes a no-mar overshoe, an anti-splinter insert, a
blade, a bevel wrench, and a carrying case.
ITEM #
377627
DESC
JS365 TOP HANDLE JIGSAW 6.5AMP
SP
[email protected]
UOM
EA
A
PRICE
144.08
CLA.RVX
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
VERMONT AMERICAN ALL-PURPOSE
JIGSAW BLADES
SP
[email protected]
ITEM #
360333
30012 JIGSAW BLADE 6T 3-3/8IN
DESC
SP
[email protected]
360341
30013 JIGSAW BLADE 10T 3-3/8IN
[email protected]
UOM
CD
A
CD
A
PRICE
1.55
X.YHX
1.55
X.YHX
VERMONT AMERICAN STANDARD
HOLLOW GROUND JIGSAW BLADE
Keyless T/U Shank. Powerful 5.5 Amp motor. Skil stable
foot design for more controlled starts. 4-posistion
orbital cut control for fast or smooth cuts. Custom
molded rest design to prevent blade from damaging
material.
ITEM #
336491
ITEM #
445606
Standard Hard and Wet Wood. 1/4" universal shank. Prescision-ground teeth
for faster, rough contour and straight line sawing. Good in hard and wet wood.
Alloy steel blades for strength and long life. 3-3/8" overall length. 2 blades per
card.
Variable speed orbital action. 4.5 Amps, 0-1300 SPM.
100% ball and roller bearings. Four position Orbital
action. 1" stroke. Includes heavy gauge steel carrying
case, Allen wrench and assorted blades.
ITEM #
539449
SKIL 6 AMP ORBITAL JIGSAW W/LASER
Built-in laser guide for accurate cutting. 4-position
orbital cut control for fast or smooth cuts. Custom
molded tool rest design to prevent blade from
damaging material. Tool-less blade change for quick
and easy blade changes. Tool-less foot adjustment for
easy angle changes.
Provides best cutting performance, faster cutting
speed and better blade life for cutting of brick, block,
refractory, concrete, paver and stone. 7/8"-20mm-5/8"
arbor, for use on angle grinder, dry-wet cutting, max
RPM 15,000.
DESC
Power Saws, Blades and Accessories,
Jigsaws and Blades, Electric Jigsaws
1/4" universal shank. Hollow-ground, alloy steel blade for fine finish cuts.
Precision-sharpened teeth for smooth, fast cuts. Use in all wood, plastics,
laminates and nonferrous metals. 3-1/8" overall length. 2 blades per card.
UOM
EA
A
PRICE
60.45
EO.YAX
ITEM #
374318
DESC
30016 JIGSAW BLADE 3-1/8IN 10T
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
2.70
C.HCX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
VERMONT AMERICAN CARBON STEEL
JIGSAW
VERMONT AMERICAN STANDARD
METAL CUTTING JIGSAW BLADES
Made from premium carbon steel, precision-filed and set for maximum cutting
performance. Precision ground teeth for faster, smoother cutting. All-purpose
and specialty blades to handle most cutting jobs. Fits all jigsaws using 1/4"
universal shank. 4-1/8" overall length. 8 teeth per inch. Fast cutting in wood
and plastic up to 3". 1 blade per card.
1/4" universal shank. 2-3/4" overall length. 2 per card. Cuts Thick Metal /
Plastic Up To 3/8".
ITEM #
314234
360376
DESC
SP
[email protected]
30001 JIGSAW BLADE 4-1/8IN 8TPI
UOM
CD
A
PRICE
2.65
C.HLX
ITEM #
374326
360384
371564
VERMONT AMERICAN STANDARD
HOLLOW-GROUND REVERSE TOOTH JIGSAW BLADE
1/4" universal shank. Hollow-ground, reverse-tooth blade for chip-free top
surfaces on paneling, laminates and wood. Precision-sharpened teeth for
smooth, fast cuts. 3-1/8" overall length. 2 blades per card.
ITEM #
371556
DESC
30018 JIGSAW BLADE 12T 3-1/8IN
SP
[email protected]
UOM
CD
A
PRICE
3.23
L.XVX
371661
361283
DESC
30015 JIGSAW
BLADE 13T 2-3/4IN
30027 JIGSAW
BLADE 19T 2-3/4IN
30030 BLADE
JIGSAW 2-3/4IN
10T
INFO
SCROLL CUTS IN WOOD UP
TO 1/8""
SMOOTH SCROLL CUTS IN
WOOD UP TO 1/2""
SCROLL CUTS IN WOOD UP
TO 3/4""
SP UOM PRICE
[email protected] CD 1.86
A
C.CHX
[email protected] CD 3.57
A
L.LAX
[email protected] CD 1.84
A
C.CEX
SP
[email protected]
UOM
CD
A
[email protected] CD
A
[email protected] CD
A
[email protected] CD
A
PRICE
2.21
C.OYX
2.21
C.OYX
2.21
C.OAX
2.23
C.VCX
Industrial Wood and Plastic Cutting. 1/4" universal shank. For superior, allpupose cutting in wood and plastic. 3-5/8" overall length. 1 blade per card.
Fast Cuts In Wood Or Plastic Up To 2".
ITEM #
314803
VERMONT AMERICAN STANDARD
SCROLL SAWING JIGSAW BLADES
ITEM #
360368
INFO
CUTS THICK METAL /
PLASTIC UP TO 3/8""
CUTS ALUMINUM / METAL
UP TO 1/4""
CUTS THIN METAL /
PLASTIC UP TO 3/16""
CUTS SHEET METAL
UNDER 1/16""
VERMONT AMERICAN BIMETAL JIGSAW
BLADES
314811
1/4" universal shank. For cutting contour and irregular shapes. Premium alloy
steel blades for long life. 2-3/4" overall length. 2 blades per card. Scroll Cuts In
Wood Up To 1/8".
DESC
30024 JIGSAW
BLADE 12T 2-3/4IN
30025 JIGSAW
BLADE 17T 2-3/4IN
30026 JIGSAW
BLADE 21T 2-3/4IN
30032 JIGSAW
BLADE 36T 2-3/4IN
DESC
30062 JIGSAW
BLADE 6T 3-5/8IN
30063 JIGSAW
BLADE 10T 3-5/8IN
INFO
FAST CUTS IN WOOD OR
PLASTIC UP TO 2""
CUTS WOOD AND PLASTIC
UP TO 3/4""
SP UOM PRICE
[email protected] CD 2.89
A
C.ALX
[email protected] CD 2.89
A
C.AEX
VERMONT AMERICAN METAL CUTTING
BIMETAL JIGSAW BLADES
1/4" universal shank. For precision cutting in ferrous and non-ferrous metal. 23/4" overall length. 1 blade per card. Cuts Thick Metal Up To 3/8".
ITEM #
314838
314846
314854
DESC
30074 JIGSAW BLADE
12T 2-3/4IN
30075 JIGSAW BLADE
17T 2-3/4IN
30076 JIGSAW BLADE
21T 2-3/4IN
INFO
CUTS THICK METAL UP
TO 3/8""
CUTS IRON / METAL UP
TO 1/4""
CUTS THIN METAL UP
TO 3/16""
SP UOM PRICE
[email protected] CD 3.02
A
C.YXZ
[email protected] CD 2.95
A
C.AZX
[email protected] CD 2.93
A
C.AZX
VERMONT AMERICAN JIGSAW BLADES
1/4" universal shank. For flushcutting and straight line sawing of hard and soft
wood over 1/2". The 6" length is also a pruning saw with fleam teeth. 2 per
card. Flush Cuts In Wood 1/2" And Up.
VERMONT AMERICAN CARBIDE TIPPED
U-SHANK JIGSAW BLADES
ITEM #
371602
371742
DESC
30021 JIGSAW
BLADE 8T 6IN
2/CD
30031 JIGSAW
BLADE 6T 6IN
2/CD
INFO
FLUSH CUTS IN WOOD 1/2"
AND UP"
SP UOM PRICE
[email protected] CD 3.32
A
L.CZX
Carbide teeth for heavy-duty use. Cuts stainless steel and other abrasive
materials up to 7/32'. 2-3/4" long. Fits all jigsaws using 1/4" universal shank. 1
blade per card.
FLUSH CUTS AND PRUNING
IN WOOD 3/4" AND UP"
[email protected] CD
A
ITEM #
314242
www.wallacehardware.com
2.54
C.ROX
DESC
30002 JIGSAW BLADE 2-3/4IN 24TPI
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
15.45
Y.HZX
173
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
VERMONT AMERICAN ISO-TEMP
JIGSAW BLADES
LENOX BI-METAL JIGSAW BLADES
1/4" universal shank. 3-1/8" long. Ultra-thin blades create less drag and
increase speed, yielding more cuts per battery charge. High carbon steel jig
saw blades are precision filed and set for maximum cutting performance in
ferrous and non-ferrous metals. Teeth are precision ground for fast, smooth
cuts. 2 per card. Fast Cuts In Wood Up To 2".
ITEM #
371572
371580
371599
DESC
30350 JIGSAW
BLADE-WOOD-6T
30355 JIGSAW
BLADE-WOOD12T
30356 JIGSAW
BLADE-WOOD10T
Bi-metal. 2 per pack. For cast iron, fiberglass, ceramic
tile, hard plaster. Medium carbide grit.
ITEM #
745731
DESC
20320-GT300J JIG SAW BLADE 3IN
SP
[email protected]
INFO
FAST CUTS IN WOOD UP TO
2""
SCROLL FOR WOOD AND
NON-FERROUS METALS
SP UOM PRICE
[email protected] CD 3.68
A
L.OEX
[email protected] CD 3.68
A
L.OEX
LENOX BI-METAL JIGSAW BLADE
SMOOTH CUTS IN WOOD UP
TO ?
[email protected] CD
A
Bi-metal. 2 per pack. Fast, smooth cuts in wood, plastic
and composition material 3/16" to 1-1/2" thick, 4" long.
3.68
L.OXZ
ITEM #
162280
DESC
UOM
PG
A
PRICE
6.30
V.LEX
SP UOM PRICE
7.06
A
V.HOX
20313-BT450S J-SAW BLADE BOSCH 4IN 10T [email protected] PG
VERMONT AMERICAN ISO-TEMP
JIGSAW BLADE
Cordless-Iso Temp. Extra toughening process. High speed steel. For metal
cutting. 1/4" shank, cordless jigsaw blades. 24 teeth. 3-1/8" long. Cuts metal up
to 1/4". 2 per card.
LENOX BI-METAL JIGSAW BLADES
ITEM #
348813
Bi-Metal. 2 per pack. For steels: 3/32" - 1/4" thick. Non-ferrous metal: 3/32" 3/8" thick. 3" length.
DESC
SP
[email protected]
30365 JIGSAW BLADE METAL 24T
UOM
CD
A
PRICE
3.68
L.OEX
ITEM #
745758
DESC
20321-BT314J JIG SAW BLADE 14T 3IN
SP
[email protected]
UOM
PG
A
PRICE
3.78
L.ELX
VERMONT AMERICAN JIGSAW BLADES
1/4" universal shank. For all-purpose cuts in wood, plastic, laminates, brass
copper and aluminum. High speed steel blade No. 30023 also cuts steel. 2
blades per card. 3-1/8"l, Cuts Wood And Plywood Up To 2".
ITEM #
397105
DESC
INFO
3-1/8"L
30019 JIGSAW BLADE 10T 3-1/8IN
397113
30023 JIGSAW BLADE 10T 2-3/4IN 2-3/4"L
SP UOM PRICE
[email protected] CD
2.59
A
C.RZX
[email protected] CD
2.57
A
C.REX
LENOX BI-METAL JIGSAW BLADES
Bi-Metal. 2 per pack. For stainless steel, structural steel: 1/16" - 3/16" thick.
ITEM #
745766
DESC
20322-BT318J JIG SAW BLADE 18T 3IN
SP
[email protected]
UOM
CD
A
PRICE
3.78
L.ELX
SP UOM
[email protected] CD
A
PRICE
3.74
L.ECX
LENOX BI-METAL JIGSAW BLADES
VERMONT AMERICAN PLASTERDRYWALL SCROLL JIGSAW BLADE
Bi-Metal. 2 per pack. For stainless steel, sheet metal:
1/8" thick. Non-ferrous metal: 1/4" thick.
1/4" universal shank. For fast cutting in plaster, plaster board and drywall. 35/8" overall length. 2 cards per blade.
ITEM #
371645
174
DESC
30029 JIGSAW BLADE 8T 3-5/8IN
SP
[email protected]
UOM
CD
A
PRICE
3.09
C.YVX
ITEM #
745774
DESC
20323-BT324J JIG SAW BLADE 24T 3IN
1-800-776-0976 NOVEMBER
2016
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
DISSTON REMGRIT CARBIDE GRIT JIG SAW BLADE
WITH T-SHANK
LENOX BI-METAL JIGSAW BLADES
Coarse Grit, 76mm. Cuts extremely hard abrasive materials. Cutting
edge of tungsten carbide particles is permanently bonded to an alloy
steel back. Blades are high heat and abrasion resistance. Dimensions:
0.1 x 5.9 x 1.9 inches.
ITEM #
523747
523755
DESC
SP UOM PRICE
3.55
L.ORX
3.75
L.EXZ
GJ10BL SCROLL JIG SAW BLADE-CRSE GRIT 2- [email protected] EA
7/8IN
A
GJ14BL T-SHANK JIG SAW BLADE-CRSE GRIT
[email protected] EA
3IN
A
Bi-Metal. 2 per pack. Ground teeth for clean contour cuts in wood, plastic and
composition material: 3/8" - 1-1/2" thick.
ITEM #
745812
DESC
20334-BT416JC JIG SAW BLADE 6T 4IN
SP
[email protected]
LENOX BI-METAL JIGSAW BLADES
ITEM #
745820
DESC
20335-BT450J JIG SAW BLADE 10T 4IN
SP
[email protected]
UOM
PG
A
PRICE
7.11
V.HZX
SP UOM
[email protected] PG
A
PRICE
7.11
V.HZX
SP
[email protected]
PRICE
7.11
V.HZX
Coarse (Scroll) Grit, 73mm. Cuts extremely hard abrasive materials.
Cutting edge of tungsten carbide particles is permanently bonded to
an alloy steel back. Blades are high heat and abrasion resistance.
Dimensions: 0.1 x 5.9 x 1.9 inches.
DESC
SP
PRICE
7.11
V.HZX
Bi-Metal. 2 per pack. Ground teeth for fast, smooth cuts in wood, plastic and
composition material: 3/16" - 1-1/2" thick.
DISSTON REMGRIT 2-7/8" CARBIDE GRIT JIG SAW
BLADES WITH UNIVERSAL SHANK
ITEM #
523739
UOM
PG
A
UOM PRICE
3.55
A
L.ORX
GJ4BL JIG SAW BLADE-MEDIUM GRIT 2-7/8I [email protected] EA
LENOX BI-METAL JIGSAW BLADES
Bi-Metal. 2 per pack. Ground teeth for chip-free cutting
in formica, laminate and plastic: 3/16" - 1-1/2" thick.
LENOX BI METAL JIGSAW BLADE
Bi-Metal. 2 per pack. Ground teeth for fine contour cutting in wood, veneer,
laminate and plastic: 1/16" - 1/2" thick.
ITEM #
745723
DESC
SP UOM
[email protected] PG
A
20333-BT320JC JIG SAW BLADE 20T 3IN
ITEM #
745839
DESC
20336-BT450JR JIG SAW BLADE 10T 4IN
PRICE
5.11
O.VOX
LENOX BI-METAL JIGSAW BLADE
LENOX BI-METAL JIGSAW BLADES
Bi-Metal. 2 per pack. For wood, nail-embedded wood: 1/4" - 2" thick. All steels:
1/8" - 1/2" thick. Soft metals: 1/8" - 1" thick.
ITEM #
745871
DESC
SP
[email protected]
20328-BT480J JIG SAW BLADE 4-1/2IN
UOM
PG
A
PRICE
5.08
O.OYX
LENOX BI-METAL JIGSAW BLADES
Bi-Metal. 2 per pack. Ground teeth for fast, clean
cutting in wood, plastic and composition material: 3/8" 2" thick.
ITEM #
745855
DESC
20337-BT456J JIG SAW BLADE 4-1/2IN
UOM
CD
A
SPYDER DOUBLE SIDED U SHANK
JIGSAW BLADE
Bi-Metal. 2 per pack. For non-ferrous material: 1/16" 5/16".
Fits jig saws that take U-shank blades. Designed to create extreme radius
cuts. For fast & smooth splinter-free cuts.
ITEM #
745898
DESC
20330-BT518J JIG SAW BLADE 5-1/4IN
www.wallacehardware.com
SP
[email protected]
UOM
PG
A
PRICE
4.17
L.HYX
ITEM #
456942
DESC
300013 DBL SIDED JIGSAW 2 PC 4.5IN WD U
SHANK
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
7.39
A
V.YOX
175
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
SPYDER DOUBLE SIDED U SHANK
JIGSAW BLADE
SPYDER SKELETON JIGSAW BLADE
Fits jig saws that take U-shank blades. Designed to create extreme radius
cuts. For fast & smooth splinter-free cuts.
ITEM #
456950
DESC
SP UOM PRICE
300014 DBL SIDED JIGSAW 2 PC 4IN U SHANK [email protected] PG 4.62
A
O.XAX
ITEM #
457000
DESC
SP UOM PRICE
[email protected] PG
6.38
A
V.LRX
300020 SKELETON JIGSAW ASST 2 PC T
SHANK
SPYDER SKELETON JIGSAW BLADE
SPYDER DOUBLE SIDED U SHANK
JIGSAW BLADE
Fits jig saws that take U-shank blades. Designed to create extreme radius
cuts. For fast & smooth splinter-free cuts.
ITEM #
456969
Cut 100% straight without losing your cool. Made in Germany using patented
laser technology. Features a parallel-cut, open framework design that helps
dissipate frictional heat.
DESC
SP UOM PRICE
300015 DBL SIDED JIGSAW ASST 2PC COMBO [email protected] PG 6.32
USHANK
A
V.LCX
Cut 100% straight without losing your cool. Made in Germany using patented
laser technology. Features a parallel-cut, open framework design that helps
dissipate frictional heat.
ITEM #
457019
DESC
SP UOM PRICE
[email protected] PG
6.38
A
V.LRX
300021 SKELETON JIGSAW 2PC HARD/SOFT
WD USHK
SPYDER SKELETON JIGSAW BLADE
SPYDER SKELETON JIGSAW BLADE
Cut 100% straight without losing your cool. Made in Germany using patented
laser technology. Features a parallel-cut, open framework design that helps
dissipate frictional heat.
ITEM #
456888
DESC
300012 SKELETON JIGSAW 2PC LAM/SYN T
SHANK
SP UOM PRICE
[email protected] PG
6.38
A
V.LRX
Cut 100% straight without losing your cool. Made in Germany using patented
laser technology. Features a parallel-cut, open framework design that helps
dissipate frictional heat.
ITEM #
457027
DESC
SP UOM PRICE
[email protected] PG
6.38
A
V.LRX
300022 SKELETON JIGSAW 2 PC HARD/SOFT
WD TSHK
SPYDER 8 PIECE JIGSAW BLADE SET
SPYDER SKELETON JIGSAW BLADE
Cut 100% straight without losing your cool. Made in Germany using patented
laser technology. Features a parallel-cut, open framework design that helps
dissipate frictional heat.
ITEM #
456977
DESC
300016 SKELETON JIGSAW 2PC LAM/SYN
USHANK
SP UOM PRICE
[email protected] PG
6.38
A
V.LRX
Cut 100% straight without losing your cool. Made in Germany using patented
laser technology. Features a parallel-cut, open framework design that helps
dissipate frictional heat.
176
DESC
300019 SKELETON JIGSAW ASST 2 PC U
SHANK
ITEM #
457035
DESC
SP
UOM PRICE
24.02
A
CR.XLX
300037 JIGSAW VAR PACK 8 PC TSHK 2 EA [email protected] PG
LENOX BI-METAL JIGSAW BLADE
SPYDER SKELETON JIGSAW BLADE
ITEM #
456985
Double-sided blades pivot on a dime to deliver extraordinary
tight radius cuts. Cuts with unmatched precision, speed and
cleanliness - less frictional heat. Blades for wood & multisurface in a variety of teeth per inch sizes.
SP UOM PRICE
[email protected] PG
6.38
A
V.LRX
Bi-Metal. 2 per pack. For fast, rough cutting in wood
and composition material: 3/8" - 2" thick.
ITEM #
745863
DESC
20329-BT486J JIG SAW BLADE 4-1/2IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
PG
A
PRICE
4.15
L.HZX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
LENOX EUROPEAN STYLE JIGSAW
BLADES
LENOX U-SHANK JIG SAW BLADES
Lenox super sharp to cut without deflection. Ground to precision sharpness for
straighter cuts and a smoother finish. Designed for optimal performance in
wood cutting, including hardwoods. 2 pack. Fast, Rough Wood Cutting, Milled
Teeth, Hcs.
5 each per vinyl pouch. English only. Fine, contour
cutting in wood, veneer, laminate, and plastic 1/16" to
1/2" thick. 20 teeth per inch. Bi-Metal.
ITEM #
344559
DESC
20311-BT320SC J-SAW BLADE BOSCH 20T
SP UOM
[email protected] EA
A
PRICE
5.11
O.VOX
ITEM #
793639
793647
793655
701114
793612
LENOX T-SHANK JIG SAW BLADES
Super sharp to cut without deflection. Ground to precision sharpness for
straighter cuts and a smoother finish. Designed for optimal performance in
wood cutting, including hardwoods. 2 pack. Fast, Rough Wood Cutting, Milled
Teeth, Hcs.
ITEM #
701483
701491
701505
701521
701130
701149
701157
701165
701173
701122
DESC
INFO
FAST, ROUGH WOOD
CUTTING, MILLED TEETH,
HCS
VERY FAST, CLEAN WOOD
CUTTING, FLEAM GROUND
TEET
20752-CT450S JIG CLEAN SMOOTH WOOD
SAW BLADE 4IN
CUTTING, FLEAM GROUND
10T
TEETH, H
20753-CT450SR
DOWN CUTTING, NO TOP
JIG SAW BLADE
SPLINTERS, FLEAM GROUND
10DTPI
TEE
20301-BT314S JIG THICK METAL CUTTING
SAW BLADE T(>3/32")
20750-CTS406S
JIG SAW BLADE 4IN
6T
20751-CT456S JIG
SAW BLADE 4IN 6T
SHANK 14T
20302-BT318S JIG
SAW BLADE TSHANK 18T
20754-CT320SC
JIG SAW BLADE TSHANK 20T
20303-BT324S JIG
SAW BLADE TSHANK 24T
20803-BT332S JIG
SAW BLADE TSHANK 32T
20300-GT300S JIG
SAW BLADE
3INXGRIT
INFO
FAST, ROUGH WOOD
CUTTING, MILLED TEETH, HCS
SP UOM PRICE
[email protected] PG
4.41
A
L.YVX
VERY FAST, CLEAN WOOD
CUTTING, FLEAM GROUND
TEET
CLEAN SMOOTH WOOD
CUTTING, FLEAM GROUND
TEETH, H
DOWN CUTTING, NO TOP
SPLINTERS, FLEAM GROUND
TEE
SCROLL CUTTING IN WOOD,
LAMINATES, FLEAM GROUND
[email protected] PG
A
4.44
L.YVX
[email protected] PG
A
4.44
L.YVX
[email protected] PG
A
4.44
O.XZZ
[email protected] PG
A
4.44
L.YHX
VERY THIN METAL CUTTING
(<1/16")
[email protected] PG
A
3.76
L.ECX
SP UOM PRICE
[email protected] PG
4.41
A
L.YVX
[email protected] PG
A
4.44
L.YHX
[email protected] PG
A
4.41
L.YVX
[email protected] PG
A
4.44
L.YHX
[email protected] PG
A
3.74
L.VYX
MEDIUM METAL CUTTING
(1/16"-1/4"")
[email protected] PG
A
3.76
L.VYX
SCROLL CUTTING IN WOOD
& LAMINATES. FLEAM
GROUND
THIN METAL CUTTING,
(<1/8")MILLED TEETH
[email protected] PG
A
4.44
L.YVX
[email protected] PG
A
3.74
L.ECX
VERY THIN METAL, (<1/16")
[email protected] PG
A
3.79
L.ECX
CERAMIC & TILE CUTTING,
CARBIDE GRIT
[email protected] PG
A
6.35
V.LCX
www.wallacehardware.com
793620
DESC
20755 CTS406J
JIG SAW BLADE
6T 4IN
20756 CT456J
JIG SAW BLADE
6T 4IN
20757-CT450J
JIG SAW BLADE
10T 4IN
20758-CT450JR
JIG SAW BLADE
100T
20759-CT320JC
JIG SAW BLADE
20TPI
20609-BT332J
JIG SAW BLADE
32TPI
IRWIN T-SHANK JIGSAW BLADES
Wood Cutting: Precision ground teeth for fast smooth cutting in hard and soft
wood, plastics, laminate particle board and plywood. Metal cutting: Fully
hardened teeth for cutting ferrous and non-ferrous metals, aluminum and
sheet steel. 3" T-shank, 5/32 Carbide Tpi Grit No Tooth Blade.
ITEM #
208086
207969
207977
207993
208043
207950
208078
208035
208094
DESC
3072300 JIGSAW BLADE T-SHANK
3IN
3072314 JIGSAW BLADE T-SHANK
10TPI 3IN MILLED
3072320 JIGSAW BLADE T-SHANK
20TPI 3IN MILLED
3072336 JIGSAW BLADE T-SHANK
36TPI 3IN MILLED
3072406 JIGSAW BLADE T-SHANK
6TPI 4IN FLEAM
3072410 JIGSAW BLADE T-SHANK
10TPI 4IN MILLED
3072412 JIGSAW BLADE T-SHANK
10TPI 4IN FLEAM
3072410D JIGSAW BLADE DOWN
CUT 10TPI 4IN FLEAM
3072001 JIGSAW BLADE T-SHANK
6PC
1-800-776-0976 NOVEMBER
2016
INFO
SP UOM
3" T-SHANK [email protected] EA
A
3" T-SHANK [email protected] EA
A
3" T-SHANK [email protected] EA
A
3" T-SHANK [email protected] EA
A
4" T-SHANK [email protected] EA
A
4" T-SHANK [email protected] EA
A
4" T-SHANK [email protected] EA
A
4" T-SHANK [email protected] EA
A
6 PIECE SET [email protected] AS
A
PRICE
9.97
R.RVX
4.48
O.XCX
4.44
L.YRX
4.42
L.YEX
4.44
L.YRX
4.44
L.YRX
4.44
L.YRX
4.44
L.YRX
11.07
H.OAX
177
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
IRWIN U-SHANK JIGSAW BLADES
VERMONT AMERICAN 5 PC. BI-METAL
U-SHANK JIGSAW BLADE SET
Wood Cutting: Precision ground teeth for fast smooth cutting in hard and soft
wood, plastics, laminate particle board and plywood. Metal cutting: Fully
hardened teeth for cutting ferrous and non-ferrous metals, aluminum and
sheet steel. 3" Shank, 5/32" Carbide Grit Blade.
ITEM #
207934
207802
207829
207888
207918
207799
207926
207896
207942
DESC
3071300 JIGSAW BLADE USHANK 3IN
3071314 JIGSAW BLADE U-SHANK
10TPI 3-1/4
3071320 JIGSAW BLADE USHANK 20TPI 3-1/4IN
3071336 JIGSAW BLADE USHANK 36TPI 3-1/4IN
3071406 JIGSAW BLADE USHANK 6TPI 4IN
3071410 JIGSAW BLADE U-SHANK
10TPI 4IN MILLED
3071412 JIGSAW BLADE U-SHANK
10TPI 4IN FLEAM
3071410D JIGSAW BLADE DOWN
CUT 10TPI 4IN FLEAM
3071001 JIGSAW BLADE U-SHANK
6PC
INFO
3" SHANK
3-1/4" BLADE
3-1/4" BLADE
3-1/4" BLADE
4" BLADE
4" BLADE
4" BLADE
4" BLADE
6 PIECE SET
SP UOM PRICE
[email protected] EA
10.11
A
R.HZX
[email protected] EA
4.50
A
L.YRX
[email protected] EA
4.44
A
L.YRX
[email protected] EA
4.42
A
L.YEX
[email protected] EA
4.44
A
L.YRX
[email protected] EA
4.44
A
L.YRX
[email protected] EA
4.44
A
L.YRX
[email protected] EA
4.42
A
L.YEX
[email protected] AS
11.07
A
H.OAX
Contains one each of 30074 thick metal cutting, 30075
iron / metal cutting, 30076 thin metal cutting, 30062
fast wood cutting and 30063 wood / plastic cutting
blades.
ITEM #
157937
DESC
30084 JIG SAW BLADE SET 5PC
SP
[email protected]
ITEM #
332496
DESC
30045 JIGSAW BLADE SET 3PC
SP
[email protected]
UOM
CD
A
PRICE
10.42
R.HOX
1/4" universal shank.
ITEM #
596906
DESC
30085 JIGSAW BLADE SET 7PC
SP
[email protected]
UOM
ST
A
PRICE
18.78
CZ.YEX
VERMONT AMERICAN 10 PC. STANDARD
JIGSAW BLADE SET
1/4" shank. Contains 10 blades. 2 each of #30012, #30013, 1 each of #30015,
#30016, #30024, #30025, #30026, and #30030.
ITEM #
307106
VERMONT AMERICAN 3 PC. BI-METAL JIGSAW
BLADE SET
PRICE
14.88
Y.VHX
VERMONT AMERICAN 7 PC. BI-METAL
JIGSAW SET
VERMONT AMERICAN 3 PC. BI-METAL
JIGSAW BLADE SET
Industrial. Assorted bimetal blades for cutting wood,
plastic, ferrous and nonferrous metals. Item no. of
blades included: 30074, 30075, and 30076.
UOM
ST
A
DESC
30039 JIGSAW BLADE SET 10PC
SP
[email protected]
UOM
CD
A
PRICE
10.75
R.YVX
Assorted bimetal blades for cutting wood, plastic, ferrous and nonferrous metals. Contains 3 blades. Includes 1 ea. #30062, #30063,
and #30076.
ITEM #
314862
DESC
30083 JIGSAW BLADE SET 3PC
SP
[email protected]
UOM
EA
A
PRICE
9.18
E.AHX
VERMONT AMERICAN 12 PC. JIGSAW BLADE
SET
1/4" shank. Contains 5 blades. 1 each of #30012, #30013, #30015, #30026,
and #30030.
Set includes: (1) #30015 Scroll/Thin Wood; (1) 30030
Scroll/Thick Wood; (1) #30016 Wood/Smooth Cut; (1) #30024
Thick Metal/Plastic; (1) #30025 Aluminum/Metal; (1) #30026
Thin Metal/Plastic; (1) #30018 Laminates/Smooth Cut; (1)
#30029 Plaster Cutting; (2) #30012 Wood/Fast Cut; (2) #30013
Compositions/Wood.
ITEM #
369063
ITEM #
348821
VERMONT AMERICAN 5 PC. STANDARD
JIGSAW BLADE SET
178
DESC
30034 JIGSAW BLADE SET 5PC
SP
[email protected]
UOM
CD
A
PRICE
4.67
L.YLX
DESC
30036 JIGSAW BLADE SET 12PC
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
11.60
H.VOX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
LENOX 5 PC. JIG/SABRE SAW BLADE
ASSORTMENT
ARTU TUNGSTEN CARBIDE JIG SAW BLADE
5-PC U SHANK MULTI-PURPOSE BLADE KIT Assorted high carbon
steel U shank jig blades. Contains 1 each of following blades:
456J 4" 6TPI for wood cutting 450J 4" 10TPI for smooth wood
cutting 324J 3-5/8" 24 TPI for thin metal cutting 320JC 3-5/8"
20TPI for laminate scroll cutting 318J 3-5/8" 18TPI for 1/16-1/4" metal cutting All
in blister pack
ITEM #
391751
DESC
20769-C543JA AST JIG/BLD UNIV
SP
[email protected]
UOM
PG
A
PRICE
9.76
R.EVX
5 piece T Shank multi-purpose kit. Includes 4565,4505, 3245,
320SC and 318S.
DESC
20764-C543SA JIG SAW KIT 5 PC
DESC
01637 JIGSAW BLADE F/ BOSCH 3IN
SP
[email protected]
UOM
CD
A
PRICE
4.72
L.RLX
ARTU TUNGSTEN CARBIDE JIG SAW BLADE
SP
[email protected]
UOM
KT
A
ITEM #
169609
PRICE
9.76
R.EVX
LENOX 7 PC JIGSAW BLADE ASSORTMENTS
DESC
01652 US JIG SAW BLADE 3IN
SP
[email protected]
UOM
CD
A
PRICE
4.72
L.RLX
ARTU TUNGSTEN CARBIDE JIG SAW BLADE
Cuts tough materials other blades won't even scratch. Never needs
resharpening. Outlasts conventional blades. Use to cut brick, cast iron
pipe, ceramic tile, composites, fiberglass, flagstone & slate, laminates,
marble, plywood, PVC & more. 1 blade per card.
ITEM #
457957
7 piece assortment contains a vinyl pouch and one each of
the following; 486J: 6 teeth per inch; 480J: 10 teeth per inch;
340JV: 10/14 teeth per inch; 450J: 10 teeth per inch; 314J: 14
teeth per inch; 318J: 18 teeth per inch; and 324J: 24 teeth per
inch.
ITEM #
582735
ITEM #
169595
Cuts tough materials other blades won't even scratch. Never needs
resharpening. Outlasts conventional blades. Use to cut brick, cast iron
pipe, ceramic tile, composites, fiberglass, flagstone & slate, laminates,
marble, plywood, PVC & more. 1 blade per card.
LENOX 5 PC JIGSAW KIT
ITEM #
701548
Cuts tough materials other blades won't even scratch. Never needs
resharpening. Outlasts conventional blades. Use to cut brick, cast iron
pipe, ceramic tile, composites, fiberglass, flagstone & slate, laminates,
marble, plywood, PVC & more. 1 blade per card.
DESC
01661 JIGSAW BLADE 3-5/8 TC GRIT USHANK
SP UOM PRICE
[email protected] EA
6.22
A
O.VRX
ARTU TUNGSTEN CARBIDE JIG SAW BLADE
DESC
SP UOM PRICE
20606-U743JA JIG SAW BLADES - ASSORTED [email protected] PG 17.34
A
CZ.ROX
Cuts tough materials other blades won't even scratch. Never needs
resharpening. Outlasts conventional blades. Use to cut brick, cast iron
pipe, ceramic tile, composites, fiberglass, flagstone & slate, laminates,
marble, plywood, PVC & more. 1 blade per card.
ITEM #
457965
DESC
SP
UOM PRICE
5.18
A
L.AZX
01666 JIGSAW BLADE 4IN TC GRIT T-SHANK [email protected] EA
JMK/IIT 14 PIECE JIGSAW BLADE SET
Universal fitting can be used with Black & Decker,
Hitachi, Ryobi & Skil as well as import brands. Metal
cutting: 2 x 14 tpi medium cut, non ferrous metals. 2 x
18 tpi medium cut, non ferrous metals. 2 x 24 tpi fine
cut, non ferrous metals. 2 x 32 tpi extra fine cut. Timber
and plastic cutting: 2 x 6 tpi fast cut. 2 x 8 tpi medium cut. 2 x 10 tpi smooth
cut. Includes case.
Durable hardened steel. Extreme radius cuts. Clean. Woodworking. 2
pk. 4.5 In. (115MM).
ITEM #
128287
ITEM #
354201
DESC
19220 JIGSAW BLADE SET 14PC
www.wallacehardware.com
SP
[email protected]
UOM
ST
A
PRICE
7.52
V.VHX
SPYDER DOUBLE-SIDED JIG SAW BLADE
DESC
300002BLADE, JIGSAW CV, 2PC GL 4.5"
(115MM) DBL
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] CD 7.39
A
V.YOX
179
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
SPYDER DOUBLE-SIDED JIG SAW BLADE
DISSTON BLU-MOL XTREME CARBON JIGSAW
BLADE
Durable hardened steel. Tight radius cuts. Clean. Multi-surface. 2 pk.
3.94". (100MM).
ITEM #
354228
DESC
SP UOM PRICE
[email protected] CD 4.62
A
O.XAX
300004BLADE, JIGSAW CV, 2PC GL 3.94"
(100MM) 10
2-3/4" x 8TPI.
ITEM #
458619
458562
DESC
6453 WOOD CUTTING JIG SAW BLADE 23/4X8T 2PK
6412 WOOD CUTTING JIG SAW BLADE 31/8X6T 2PK
SP UOM PRICE
[email protected] PG
2.15
A
C.VOX
[email protected] PG
2.15
A
C.VOX
SPYDER DOUBLE-SIDED JIG SAW KIT
Consists of 3.94" and 4.5" jigsaws.
ITEM #
354198
DESC
SP UOM PRICE
6.32
A
V.LCX
300009 DBL SIDED JIGSAW KIT- 3108 /3101-KR [email protected] CD
DISSTON BLU-MOL XTREME HIGH SPEED JIGSAW
BLADE
2-3/4" x 21TPI.
ITEM #
458538
458554
DISSTON BLU-MOL XTREME CARBON JIGSAW
BLADE
458546
DESC
6415 METAL CUTTING JIG SAW BLADE 23/4X21T 2PK
6416 METAL CUTTING JIG SAW BLADE 23/4X32T 2PK
6454 METAL CUTTING JIG SAW BLADE 31/8X24T 2PK
SP UOM PRICE
[email protected] PG
2.36
A
C.EAX
[email protected] PG
2.36
A
C.EAX
[email protected] PG
2.41
A
C.RXZ
2-3/4" x 14TPI.
ITEM #
458740
458716
DESC
6406 SCROLL CUT JIG SAW BLADE 2-3/4X14T
2PK
6411 SCROLL CUT SAW BLADE 3-1/8X10T 2PK
SP UOM PRICE
[email protected] PG
2.15
A
C.VOX
[email protected] PG
2.15
A
C.VOX
DISSTON BLU-MOL XTREME BI-METAL JIGSAW
BLADE
3" x 14TPI.
ITEM #
458457
DISSTON BLU-MOL XTREME CARBON
JIGSAW BLADE
458465
3-1/8" x 10TPI.
ITEM #
458627
458678
180
DESC
6418 WOOD SMTH CUT T JIGSAW BLD 31/8X10T 2
6407 WOOD AP CUT SAW BLADE 3-1/2X10T
2PK
SP UOM PRICE
[email protected] PG
2.15
A
C.VOX
[email protected] PG
2.64
A
C.HRX
458503
458511
462969
DESC
6425 METAL CUTTING JIG G SAW BLADE 3X14T
2PK
6423 METAL CUTTING JIG G SAW BLADE 3X18T
2PK
6424 METAL CUTTING JIG SAW BLADE 3X24T
2PK
6970 METAL CUTTING JIG SAW BLADE 3X32T
2PK
6426 METAL CUTTING BI-METAL JIG SAW SET
3PC
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
3.54
A
L.ORX
[email protected] PG
3.54
A
L.ORX
[email protected] PG
3.54
A
L.ORX
[email protected] PG
3.54
A
L.ORX
[email protected] PG
3.86
A
L.EHX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Jigsaws and Blades, Jigsaw Blades
DISSTON BLU-MOL BI-METAL JIGSAW BLADES
Power Saws, Blades and Accessories,
Reciprocating Saws, Electric Reciprocating
Saws
3-1/2". 6 TPI. For cutting wood, metals, steel and stainless steel. Fit-Al?
shank takes the place of U-shank and T-shank.
BLACK & DECKER 8.5 AMP
RECIPROCATING SAW
ITEM #
458422
Powerful 8.5 Amp motor for fast efficient cutting. Quick Clamp? tool-free blade
change. Cuts wood, metal and plastic. Versatile for many applications.
Variable speed (0-2,400 SPM) provides fast, efficient cutting and control in
every application. Soft grips minimizes vibration for added comfort and
control. Lightweight - 6.8 lb. 1-1/8" stroke length improves cutting performance
and speed. 2 year warranty.
458430
458449
462942
DESC
6420 WOOD/METAL CUT JIG SAW BLADE 31/2X6T 2PK
6421 WOOD/METAL JIG SAW BLADE 31/2X10/14T 2PK
6422 WOOD/METAL CUT JIG SAW BLADE 31/2X12T 2PK
6437 WOOD & METAL CUT CARBON JIG SAW
SET 25PC
SP UOM PRICE
[email protected] PG
3.94
A
L.ROX
[email protected] PG
3.94
A
L.ROX
[email protected] PG
3.94
A
L.ROX
[email protected] PG
26.71
A
CH.ACX
DISSTON BLU-MOL XTREME CARBON JIGSAW
BLADES
DESC
DESC
SP UOM
[email protected] EA
A
RS500K RECIPROCATING SAW 8.5AMP
PRICE
77.00
RA.HEX
SKIL/BOSCH 10 AMP RECIPROCATING
SAW
3-5/8" x 8TPI.
ITEM #
458767
ITEM #
329789
SP UOM PRICE
2.24
C.VYX
6419 DRYWALL CUT JIG SAW BLADE 3-5/8X8T [email protected] PG
2PK
A
10 Amps of power. Dual LED lights illuminate the cutting zone. Saw hook
allows convenient saw storage between cuts. Tool-less blade change system.
Variable speed trigger improves cutting control. Ergonomic handle with soft
grip. Includes 1-1/8" reciprocating saw, 1 reciprocating all purpose blade, and 1
jobsite carrying bag.
ITEM #
213098
DISSTON BLU-MOL XTREME CARBON JIGSAW
BLADE
DESC
RS7 RECIPROCATING SAW 10 AMP
SP
[email protected]
UOM
EA
A
PRICE
117.20
CXV.RVX
6" x 6TPI.
ITEM #
458759
DESC
6434 WOOD ROUGH CUT JIG SAW BLADE
6X6T 2PK
SP UOM PRICE
[email protected] PG
3.45
A
L.OXZ
Power Saws, Blades and Accessories,
Reciprocating Saws, Electric Reciprocating
Saws
MAKITA VARIABLE SPEED
RECIPROCATING SAW
One of our most versatile saws. Variable speed (0-23000 SPM); 11.0 AMP.
Smooth 1-3/16" stroke length. Adjustable front shoe assembly . Ball and needle
bearing construction. Comes complete with carrying case. Double insulated.
ITEM #
348732
DESC
JR3050T RECIPRO SAW 11 AMP
SP
[email protected]
UOM
EA
A
PRICE
121.59
CXA.ERX
DEWALT RECIPROCATING SAW
4-position blade clamp allows for flush cutting and
increased versatility. Powerful 10.0 Amp motor
designed for heavy-duty applications. Keyless lever-action blade clamp for
quick and easy blade changes. 0-2,800 strokes per minute and 1-1/8-inch
stroke length deliver fast cutting. Variable speed trigger allows user to
instantly control speed from 0 to dialed setting.
ITEM #
457477
DESC
DWE304 RECIPROCATING SAW 10AMP
www.wallacehardware.com
SP UOM
[email protected] EA
A
PRICE
109.73
YH.YAX
SKIL VARIABLE SPEED RECIPROCATING
SAW
8 amp motor, E-Z lock blade clamp. Variable speed with On-Tool blade
storage. Textured soft-grip boot and adjustable pivoting shoe. Soft-Grip rear
handle. 3 blades. Carrying case.
ITEM #
273554
DESC
9216-01 VS RECIP SAW 9AMP
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
72.57
RV.HYX
181
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Electric Reciprocating
Saws
BLACK & DECKER RECIPROCATING SAW
SKIL 7.5 AMP VARIABLE SPEED
RECIPROCATING SAW
Powerful 7.5 Amp Motor for tough applications. ToolLess Blade change for easy blade changes. Heavy Duty
Metal Gear Housing for added durability. Counter
Balance for vibration control. Variable Speed Dial
adjusts speed to cut. Pivoting Foot for additional stability when cutting
through materials.
ITEM #
445649
Power Saws, Blades and Accessories,
Reciprocating Saws, Cordless Reciprocating
Saws
DESC
SP UOM PRICE
9206-02 RECIPROCATING SAW W/QUICK CHG [email protected] EA 66.52
7.5AMP
A
EY.OYX
Flexible - power of corded. Freedom of cordless. The
world's first battery that automatically changes voltage
when you change tools. Keyless lever-action blade
clamp for quick and easy blade changes. 0 - 3000 spm
and a 1 1/8" stroke length for fast and efficient cutting.
Variable speed trigger allows user to instantly control speed. LED light helps
to illuminate dark jobsite work areas.
ITEM #
329566
*
NEW
DESC
SP UOM PRICE
346.75
OXY.EYX
DCS388T1 FLEXVOLT 60V RECIP SAW [email protected] KT
1 BATT KIT
A
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
SKIL/BOSCH RECIPROCATING SAW
120-Volt 12-Amp ultra compact size-only 17.8-Inch long. This saw allows easy
cutting in challenging positions, especially overhead for less fatigue with lightweight design. Constant orbital action-Fast cutting in all types of materials
with orbital action. Fixed Foot - Provides robust and solid design for the
toughest applications; no loose foot issues during use. Soft ergonomic handle
- maximum comfort and gripping during cutting. Blade change system reinforced tool less blade system.
ITEM #
377643
DESC
SP UOM PRICE
[email protected] EA
152.86
A
COR.VYX
RS325 RECIPROCATING SAW COMPACT
12AMP
VERMONT AMERICAN STANDARD
GENERAL PURPOSE RECIPROCATING BLADES
For cutting used lumber, non-ferrous metals, abrasives and other materials up
to 3/4" thick. Hard-edge, carbon steel blade for long life. 6" length; 3/4" width;
Cuts materials up to 3/4". 1 per card.
ITEM #
304999
DESC
SP
[email protected]
30123 RECIPROCATING BLADE 8T
UOM
CD
A
PRICE
2.05
C.LCX
VERMONT AMERICAN STANDARD
WOOD CUTTING RECIPROCATING BLADES
Power Saws, Blades and Accessories,
Reciprocating Saws, Cordless Reciprocating
Saws
1" stroke length and 2,900 spm for fast cutting. Keyless
blade clamp allows quick blade change without touching blade or
reciprocating shaft. Electric brake minimizes risk of blade breakage when
exiting plunge cuts. Compact and lightweight (7.1 lbs). Pivoting shoe with open
top for maximum visibility. Blade can be reversed for flush and plunge cutting.
Variable speed with trigger lock for increased blade control. Includes: 1 hour
charger, 1
182
DESC
DC385K CDLS RECIP SAW 18V
ITEM #
306789
306797
306800
DEWALT 18V CORDLESS
RECIPROCATING SAW KIT
ITEM #
293733
Performs all kinds of general woodsawing jobs. Hardened carbon steel blades
for long life. 3/4" wide. 1 per card. 6" Length.
SP
[email protected]
UOM
EA
A
PRICE
267.48
LOA.ALX
DESC
INFO
SP UOM PRICE
[email protected] CD 2.55
A
C.ECX
[email protected] CD 2.65
A
C.EYX
30134 RECIPROCATING BLADE 6T 12" LENGTH." [email protected] CD 3.99
A
L.VXZ
30130 RECIPROCATING BLADE
6" LENGTH"
6T
30133 RECIPROCATING BLADE 3T 9" LENGTH"
VERMONT AMERICAN 9-1/2" WOOD
EATER RECIPROCATING BLADE
1 per card.
ITEM #
570532
DESC
30290 RECIPROCATING BLADE 6T
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
6.75
V.XHX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
VERMONT AMERICAN BI-METAL WOOD
CUTTING RECIPROCATING BLADES
VERMONT AMERICAN STANDARD
METAL CUTTING RECIPROCATING BLADES
Fast cutting in wood or nail embedded wood, nonferrous metal and other abrasive materials. 1 per card.
High speed steel for cutting ferrous and non-ferrous metals. 5/8" width. 1 per
card. Cuts Metal Up To 1/8".
ITEM #
347485
DESC
30223 RECIPROCATING BLADE 10T
SP
[email protected]
347493
30230 RECIPROCATING BLADE 6T
[email protected]
347515
30233 RECIPROCATING BLADE 6T
[email protected]
347523
30234 RECIPROCATING BLADE 6T
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
PRICE
3.19
C.YEX
3.69
L.LRX
6.25
O.AZX
7.05
V.OVX
ITEM #
330922
304980
330930
330949
306770
304972
VERMONT AMERICAN BI-METAL METAL
CUTTING RECIPROCATING BLADES
INFO
CUTS METAL UP TO 1/8"."
SP UOM PRICE
[email protected] CD 2.45
A
C.ECX
CUTS FERROUS METALS 3/16"
AND OVER; CUTS NON-FER
[email protected] CD
A
2.45
C.ECX
CUTS FERROUS METALS 1/8" 1/4""
[email protected] CD
A
2.45
C.VAX
CUTS FERROUS AND
NONFERROUS UP TO 1/8"."
[email protected] CD
A
2.45
C.ECX
CUTS FERROUS METALS 3/16"
AND OVER; CUTS NON-FER
[email protected] CD
A
2.75
C.REX
CUTS FERROUS METALS 1/8"1/4"""
[email protected] CD
A
2.79
C.RYX
VERMONT AMERICAN 3 PC XTEND
RECIPROCATING BLADES
Bi-metal reciprocating saw blades for cutting ferrous
and non-ferrous metals. 5/8" width. 1 per card. 4"
length; Cuts metal 1/8" and up
DESC
DESC
30102
RECIPROCATING
BLADE 36T
30106
RECIPROCATING
BLADE 14T
30107
RECIPROCATING
BLADE 18T
30108
RECIPROCATING
BLADE 24T
30110
RECIPROCATING
BLADE 18T
30111
RECIPROCATING
BLADE 24T
ITEM #
347426
30205 RECIPROCATING BLADE 10T
SP
[email protected]
347434
30206 RECIPROCATING BLADE 14T
[email protected]
347442
30207 RECIPROCATING BLADE 18T
[email protected]
347450
30208 RECIPROCATING BLADE 24T
[email protected]
347469
30209 RECIPROCATING BLADE 14T
[email protected]
347477
30210 RECIPROCATING BLADE 18T
[email protected]
330876
30211 RECIPROCATING BLADE 24T
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
PRICE
2.55
C.EVX
2.55
C.EVX
2.55
C.EVX
2.55
C.EVX
3.19
C.YEX
3.15
C.YEX
3.09
C.YXZ
10 times longer than HCS, 2 times longer than HSS. Flexible, spring steel
backs provide long blade life. Super-hard, high speed steel teeth for a sharp,
long-lasting cutting edge. Shatterproof - handles the toughest cutting jobs. Fits
all jigsaws using 1/4" universal shank. Progressive tooth means the tip of the
blade has few teeth whereas the shank end has many teeth. General Purpose
Application, Progressive Teeth Per Inch.
ITEM #
334308
DESC
INFO
30550
GENERAL PURPOSE
RECIPROCATING APPLICATION, PROGRESSIVE
BLADE 6IN
TEETH P
SP UOM PRICE
[email protected] CD 10.49
A
R.RLX
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. 1 per
card. For Rough Work In Wood, Fast Cutting 6" x 3/4" x
.050.
ITEM #
391492
www.wallacehardware.com
DESC
20573-S656R RECIP BLADE 6T 6IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
4.37
L.YCX
183
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. 8% cobalt edge. Tooth hardness of Rc 65-66. Precision
milled teeth. Angled tang. For Plaster, Plaster Board 6" x 3/4" x .050.
Bi-Metal construction. 8% cobalt edge. Tooth hardness of Rc 65-66. Precision
milled teeth. Angled tang. For Rough Work In Wood, Fast Cutting 12" x 3/4" x
.050.
ITEM #
391530
DESC
20571-S636RP RECIP BLADE 6T 6IN
SP
[email protected]
UOM
CD
A
PRICE
4.37
L.YCX
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
DESC
20561-S610R RECIP BLADE 10T 6IN
DESC
20586-S156R RECIP BLADE 6T 12IN
SP
[email protected]
SP
[email protected]
UOM
CD
A
PRICE
3.78
L.ELX
ITEM #
333034
DESC
20572-656R RECIP BLADE 6T 6IN
SP
[email protected]
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. For
Wood, Compositions, Plastic, Cast Aluminum, Light
Non-Ferrous Metals, Stainless Steel 8" x 3/4" x .050.
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. 5 per
vinyl pouch. For Plaster, Plaster Board 6" x 3/4" x .050.
DESC
20581-S810R RECIP BLADE 10/14T 8IN
SP
[email protected]
UOM
CD
A
PRICE
4.75
O.CRX
ITEM #
333093
DESC
20570-636RP RECIP BLADE 6T 6IN
SP
[email protected]
Bi-Metal construction. 8% cobalt edge. Tooth hardness of Rc 65-66. Precision
milled teeth. Angled tang. For Rough Work In Wood, Fast Cutting 9" x 3/4" x
.050.
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. 5 per
vinyl pouch. For Wood, All Composition Material 6" x
3/4" x .035.
ITEM #
398128
ITEM #
333085
184
DESC
UOM
PG
A
PRICE
19.84
CO.LOX
UOM
PG
A
PRICE
20.13
CO.ORX
UOM
PG
A
PRICE
16.83
CZ.CHX
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
20587-S956R RECIP BLADE 6T 9IN
PRICE
6.87
V.EAX
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. 5 per
vinyl pouch. For Rough Work In Wood, Fast Cutting 6" x
3/4" x .050.
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
ITEM #
391549
UOM
CD
A
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. For
Wood, Compositions, Plastic, Cast Aluminum & NonFerrous Metals 6" x 3/4" x .035.
ITEM #
398101
ITEM #
391506
SP
[email protected]
UOM
CD
A
PRICE
6.40
V.LHX
DESC
20560-606R RECIP BLADE 6T 6IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. 8% cobalt edge. Tooth hardness of Rc 65-66. Precision
milled teeth. Angled tang. 5 per vinyl pouch. For Wood, Compositions, Plastic,
Cast Aluminum & Non-Ferrous Metal 6" x 3/4" x .035.
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. 2 per
vinyl pouch. For Rough Work In Wood, Straight Cutting,
Demolition Work, Rescue Operations 9" x 7/8" x .062.
ITEM #
333409
DESC
20562-610R RECIP BLADE 10T 6IN
SP
[email protected]
UOM
PG
A
PRICE
16.70
CZ.COX
ITEM #
358614
DESC
20598-966R RECIP BLADE 6T 9IN
SP
[email protected]
UOM
PG
A
PRICE
11.09
H.OYX
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. 8% cobalt edge. Tooth hardness
of Rc 65-66. Precision milled teeth. Angled tang. 5 per
vinyl pouch. Wood, Compositions, Plastic, Cast
Aluminum, Light Non-Ferrous Metals, Stainless Steel 8"
x 3/4" x .050.
Bi-Metal construction. 8% cobalt edge. Tooth hardness of Rc 65-66. Precision
milled teeth. Angled tang. 5 per vinyl pouch. For All Woods, Plastic, Cast
Aluminum & Light Non-Ferrous Metal, Stainless Steel 12" x 3/4" x .050.
ITEM #
333778
DESC
20580-810R RECIP BLADE 10/14T 8IN
SP
[email protected]
UOM
PG
A
PRICE
21.00
CV.XZZ
Bi-Metal construction. 8% cobalt edge. Tooth hardness of Rc 65-66. Precision
milled teeth. Angled tang. 5 per vinyl pouch. For Rough Work In Wood, Fast
Cutting 9" x 3/4" x .050.
DESC
20582-956R RECIP BLADE 6T 9IN
DESC
SP
[email protected]
UOM
PG
A
PRICE
26.25
CH.EXZ
ITEM #
391514
DESC
20522-S318RC RECIP BLADE 18T 3IN
Bi-Metal construction. 8% cobalt edge. Tooth hardness of Rc 65-66. Precision
milled teeth. Angled tang. 5 per vinyl pouch. For Rough Work In Wood, Fast
Cutting 12" x 3/4" x .050.
ITEM #
333042
ITEM #
391522
www.wallacehardware.com
PRICE
32.13
LC.VLX
SP
[email protected]
UOM
CD
A
PRICE
3.45
L.OLX
SP
[email protected]
UOM
CD
A
PRICE
2.77
C.AHX
Bi-Metal construction. Metal Cutting . 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Contours-Metals Under 1/8" 3" x 1/4" x
.032.
Bi-Metal construction. Metal Cutting . 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Heavy Gage Metal 1/8" - 1/4", Conduit
& Tubing, Opening Wood Crates, Removing Wood
Siding or Shingles 4" x 3/4" x .035.
DESC
UOM
PG
A
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX WOOD CUTTING
RECIPROCATING SAW BLADES
20585-156R RECIP BLADE 6T 12IN
SP
[email protected]
20583-110R RECIP BLADE 10/14T 12IN
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX WOOD CUTTING
RECIPROCATING SAW BLADE
ITEM #
333077
ITEM #
333913
SP
[email protected]
UOM
PG
A
PRICE
32.13
LC.VLX
DESC
20553-S418R RECIP BLADE 18T 4IN
1-800-776-0976 NOVEMBER
2016
185
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADE
Bi-Metal construction. Metal Cutting. 8% cobalt edge. Tooth hardness of Rc
65-66. Precision milled teeth. Angled tang. For Heavy Gage Metal 1/4" - 1/2",
Hard Rubber, Fiber & Angle Iron 6" x 3/4" x .035.
Bi-metal construction. Application: structural steel, pipe, conduit, stainless
steel: 1/16"-3/16" thick. Non-ferrous metal: 1/16"-5/16".
ITEM #
391468
DESC
SP
[email protected]
20565-S614R RECIP BLADE 14T 6IN
UOM
CD
A
PRICE
3.78
L.ELX
DESC
20563-S818R RECIP BLADE 18T 8IN
DESC
ITEM #
333417
SP
[email protected]
20567-S618R RECIP BLADE 18T 6IN
UOM
CD
A
PRICE
3.78
L.ELX
DESC
20564-614R RECIP BLADE 14T 6IN (PK IS 5
BLDS)
Bi-Metal construction. Metal Cutting. 8% cobalt edge. Tooth hardness of Rc
65-66. Precision milled teeth. Angled tang. For Metal & Galvanized Pipe 18
Gauge And Under 6" x 3/4" x .035.
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Heavy Gage Metal 1/8" - 1/4", Conduit
& Tubing, Opening Wood Crates, Removing Wood
Siding or Shingles 6" x 3/4" x .035.
ITEM #
391484
ITEM #
333484
DESC
SP
[email protected]
20569-S624R RECIP BLADE 24T 6IN
UOM
CD
A
PRICE
3.78
L.ELX
DESC
20566-618R RECIP BLADE 18T 6IN (PK IS 5
BLDS)
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Heavy Gage Metal 1/8" - 1/4", Conduit
& Tubing, Opening Wood Crates, Removing Wood
Siding or Shingles 4" x 3/4" x .035.
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Pipe, Structural Steel, Stainless Steel,
Non-Ferrous Metal 5/32" And Thicker, Nail Embedded
6" x 3/4" x .032.
186
DESC
PRICE
4.72
O.CEX
SP UOM PRICE
[email protected] PG
16.59
A
CZ.XRX
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
20552-418R RECIP BLADE 18T 4IN
UOM
CD
A
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Heavy Gage Metal 1/4" - 1/2", Hard
Rubber, Fiber & Angle Iron 6" x 3/4" x .035.
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Heavy Gage Metal 1/8" - 1/4", Conduit
& Tubing, Opening Wood Crates, Removing Wood
Siding or Shingles 6" x 3/4" x .035.
ITEM #
333395
SP
[email protected]
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
ITEM #
391476
ITEM #
295604
SP
[email protected]
UOM
PG
A
PRICE
12.90
A.HCX
ITEM #
338796
DESC
20505-600RG RECIP BLADE CARB MASTER
GRIT
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] PG
16.59
A
CZ.XRX
SP UOM PRICE
[email protected] PG
14.40
A
Y.REX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. Metal Cutting. 8% cobalt edge. Tooth hardness of Rc
65-66. Precision milled teeth. Angled tang. For Heavy Gage Metal 1/8" - 1/2",
Situations Including Rescue Operations 6" x 3/4" x .050. 6" X 3/4" X .050.
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Hard To Cut Abrasive Materials,
Fiberglass, Ceramic Tiles, Cast Iron Pipe. Medium, TPI
Carbide Grit 8" x 3/4" x .042.
ITEM #
358576
208957
DESC
20592-650R RECIP BLADE
10/14T 6IN
20512-6066R BLADE RCP
7/8X6 6T
INFO
SP UOM
6" X 3/4"" X .050" [email protected] PG
A
6" X 7/8"" X .062" [email protected] PG
A
PRICE
8.32
E.EVX
8.46
E.RZX
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADE
DESC
20576-800RG RECIP BLADE MD 8IN
SP
[email protected]
UOM
PG
A
PRICE
18.65
CL.VOX
UOM
PG
A
PRICE
11.13
H.VLX
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
Shatter resistant. Bi-metal blades bend and resist
breaking and extend blade life. Designed to attack.
Unique blade geometry positions the blade for
optimum cutting performance. Long lasting. TUFF
TOOTH design is reinforced to cut stronger and longer.
ITEM #
292591
ITEM #
582743
DESC
SP UOM PRICE
[email protected] PG
6.85
A
V.ERX
20584-S110R RECIP BLADE BI METAL 10/14T
12IN
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Heavy Gage Metal 1/4" and Above,
Straight Cutting, Demolition and Rescue Work 9" x 7/8"
x .062.
ITEM #
358606
DESC
20597-960R RECIP BLADE 10T 9IN
SP
[email protected]
LENOX LAZER RECIPROCATING SAW
BLADES
Best for extreme metal cutting. Reinforced tooth design ensures high
performance. A wider, thicker body than conventional blades. Delivers whipfree cuts that stay straight and smooth. Lasts up to 45% longer than
competitors blades. Shatter resistant, bi-metal design provides the flexibility
and durability single-metal blades can't.
ITEM #
215031
24901-T6110R RECIP BLADE 6X10TPI
DESC
SP
[email protected]
215058
24902-T6114R RECIP BLADE 6X14TPI
[email protected]
215090
24903-T6118R RECIP BLADE 6X18TPI
[email protected]
215112
24905-T9110R RECIP BLADE 9INX10TPI
[email protected]
215171
24906-T9114R RECIP BLADE 9INX14TPI
[email protected]
215023
24907-T9118R RECIP BLADE 9INX18TPI
[email protected]
303275
20170-6110R RECIP BLADE 10T 6IN
[email protected]
358584
20172-6114R RECIP BLADE 14T 6IN
[email protected]
303305
20176-9110R RECIP BLADE 10T 9IN
[email protected]
303313
20178-9114R RECIP BLADE 14T 9IN
[email protected]
303321
20180-9118R RECIP BLADE 18T 9IN
[email protected]
www.wallacehardware.com
UOM
PG
A
PG
A
PG
A
PG
A
PG
A
PG
A
PG
A
PG
A
PG
A
PG
A
PG
A
PRICE
10.48
R.YRX
10.41
R.YRX
10.48
R.YRX
13.07
A.REX
12.98
A.REX
13.07
A.REX
23.86
CE.YZX
23.69
CE.AVX
29.82
CY.AXZ
29.40
CY.RXZ
29.61
CY.AXZ
LENOX BI-METAL METAL CUTTING
CARBIDE RECIPROCATING SAW BLADES
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Cast Iron, Fiberglass, Ceramic Tile,
Clay Pipe, Stone, Brick, Plaster, Marble 10" x 3/4" x
.050.
ITEM #
342009
DESC
20506-100RG RECIP BLADE CARB MASTER
GRIT
SP UOM PRICE
[email protected] PG
24.15
A
CR.XVX
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Heavy Gage Metal 1/8" - 1/4".
ITEM #
358592
DESC
20174-6118R RECIP BLADE 18T 6IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
PG
A
PRICE
23.69
CE.AVX
187
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
LENOX DEMOLITION RECIPROCATING BLADE
KIT
Bi-Metal construction. Metal Cutting. 8% cobalt edge. Tooth hardness of Rc
65-66. Precision milled teeth. Angled tang. Bulk packaging 50 per box. For
Thick Metal Cutting.
9 piece. Engineered to rip through a wide array of materials with
ease-including structural steel, lumber, pipe and nail embedded
wood. Wider and thicker to stand up to the brutal conditions in
demolition applications. Shatter resistant, bi-metal design
provides the flexibility and durability single-metal blades can't.
ITEM #
208434
208442
208450
208469
208477
208639
208868
208655
208876
208884
DESC
22760OSB414R RECIP
BLADE 3/4IN 14T
22759OSB418R RECIP
BLADE 3/4X4 18T
22750OSB656R RECIP
BLADE 3/4X6 6T
22756OSB614R RECIP
BLADE 3/4X6 14T
22751OSB618R RECIP
BLADE 3/4X6 18T
22757OSB624R RECIP
BLADE 3/4X6 24T
22753OSB810R RECIP
BLADE 3/4X8 10T
22754OSB818R RECIP
BLADE 3/4X8 18T
22752OSB956R RECIP
BLADE 3/4X9 6T
22755OSB156R RECIP
BLADE 3/4X12 6T
INFO
FOR THICK METAL
CUTTING
FOR MEDIUM METAL
CUTTING
FOR NAIL EMBEDDED
WOOD
FOR THICK METAL
CUTTING
FOR MEDIUM METAL
CUTTING
FOR THIN METAL
CUTTING
FOR WOOD AND
METAL CUTTING
FOR MEDIUM METAL
CUTTING
FOR NAIL EMBEDDED
WOOD
FOR NAIL EMBEDDED
WOOD
SP UOM PRICE
[email protected] EA
2.09
A
C.VXZ
[email protected] EA
2.09
A
C.OAX
[email protected] EA
3.15
A
L.CXZ
[email protected] EA
2.65
A
C.HRX
[email protected] EA
2.65
A
C.HRX
[email protected] EA
2.66
A
C.HRX
[email protected] EA
3.40
A
L.LHX
[email protected] EA
3.40
A
L.LHX
[email protected] EA
4.18
A
L.HYX
[email protected] EA
5.12
A
O.VLX
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
Bi-Metal construction. Metal Cutting. 8% cobalt edge. Tooth hardness of Rc
65-66. Precision milled teeth. Angled tang. For Heavy Gage Metal 1/8" - 1/4",
Conduit & Tubing, Opening Wood Crates, Removing Wood Siding or Shingles
8" x 3/4" x .035.
ITEM #
333883
DESC
20578-818R RECIP BLADE 18T 8IN
SP
[email protected]
UOM
PG
A
PRICE
21.00
CV.XZZ
ITEM #
060895
Bi-Metal construction. Metal Cutting. 8% cobalt edge.
Tooth hardness of Rc 65-66. Precision milled teeth.
Angled tang. For Metal & Galvanized Pipe 18 Gauge
And Under 6" x 3/4" x .035.
ITEM #
333867
188
DESC
ITEM #
208280
208361
208418
10833-800RDG RECIP BLADE 8X3/4
SP
[email protected]
UOM
EA
A
PRICE
18.71
CL.VHX
SP
[email protected]
UOM
PG
A
PRICE
16.59
CZ.XRX
Gold Series is made to last longer. Bi-metal , shatter resistant, Reinforced
tooth design. 5 Pack. For Wood Cutting.
208388
ITEM #
304190
DESC
20568-624R RECIP BLADE 24T 6IN
LENOX BI-METAL GOLD
RECIPROCATING BLADES
208329
Durable chrome alloy backing steel. Narrowed kerf edge removes a thinner
cross section of material for faster cutting. More cutting edges to remove
material. Industrial diamonds embedded in high strength nickel alloy braze.
Maintains sharpness longer than carbide grit blades. .042"W x 8"L.
SP UOM PRICE
36.85
A
LV.VRX
LENOX BI-METAL METAL CUTTING
RECIPROCATING SAW BLADES
208353
LENOX CAST IRON CUTTING
RECIPROCATING BLADE
DESC
121439KPE BLADE KIT BI-METAL RECIP 9PC [email protected] KT
208299
208396
208302
208310
DESC
21060656GR RECIP
BLADE BI-METAL 3/4X6 6T
21063-676GRC RECIP
BLADE 7/16X6 6T
21064-610GR RECIP
BLADE 3/4X6 10T
21067-614GR RECIP
BLADE 3/4X6 14T
21069-618GR RECIP
BLADE 3/4X6 18T
21072-624GR RECIP
BLADE 3/4X6 24T
21065-810GR RECIP
BLADE 3/4X8 10T
21070-818GR RECIP
BLADE 3/4X8 18T
21062-956GR RECIP
BLADE 3/4X9 6T
21061-156GR RECIP BLADE
3/4X12 6T
1-800-776-0976 NOVEMBER
2016
INFO
FOR WOOD
CUTTING
FOR WOOD
CUTTING
WOOD & METAL
CUTTING
FOR THICK METAL
CUTTING
FOR MEDIUM
METAL CUTTING
FOR THIN METAL
CUTTING
WOOD & METAL
CUTTING
FOR MEDIUM
METAL CUTTING
FOR NAIL
EMBEDDED WOOD
FOR NAIL
EMBEDDED WOOD
SP UOM PRICE
[email protected] PG
24.07
A
CR.CVX
[email protected] PG
25.17
A
CR.YZX
[email protected] PG
20.09
A
CO.VOX
[email protected] PG
19.95
A
CO.OXZ
[email protected] PG
20.20
A
CO.EXZ
[email protected] PG
20.09
A
CO.VOX
[email protected] PG
25.27
A
CR.YXZ
[email protected] PG
25.10
A
CR.HOX
[email protected] PG
31.18
A
LC.XZZ
[email protected] PG
38.49
A
LE.YZX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
LENOX DEMOLITION RECIPROCATING
BLADES
AMERICAN SAW LENOX GOLD
RECIPROCATING BLADE
Engineered to rip through a wide array of materials with ease-including
structural steel, lumber, pipe and nail embedded wood. Wider and thicker to
stand up to the brutal conditions in demolition applications. Shatter resistant,
bi-metal design provides the flexibility and durability single-metal blades can't.
Features high quality bi-metal construction for added durability. It has T2
technology based tooth with wear resistant titanium coating to dissipate heat
and to offer sharp quicker cuts. Blade is ideal for cutting thick and medium
metals.
ITEM #
303267
20370-6066R5 RECIP BLADE 6T 6IN
SP
[email protected]
ITEM #
425603
303283
20371-966R5 RECIP BLADE 6T 9IN
[email protected]
303291
20372-960R5 RECIP BLADE 10T 9IN
[email protected]
DESC
UOM
PG
A
PG
A
PG
A
PRICE
21.15
CV.CVX
27.92
CA.AEX
27.92
CA.RZX
DESC
21090966GR GOLD DEMO 5PK RECIP BLADE
9X7/8X062X6T
SP UOM PRICE
[email protected] PG
51.82
A
OV.YZX
AMERICAN SAW LENOX GOLD
RECIPROCATING BLADE
LENOX CAST IRON CUTTING
RECIPROCATING SAW BLADE
Features high quality bi-metal construction for added durability. It has T2
technology based tooth with wear resistant titanium coating to dissipate heat
and to offer sharp quicker cuts. Blade is ideal for cutting thick and medium
metals.
Dual Tang diamond grit. For cutting cast iron, tile, brick and natural stone.
.075" W x 9" L.
ITEM #
425604
ITEM #
060941
DESC
SP
[email protected]
1766338 RECIPROCATING BLADE 9IN
UOM
EA
A
PRICE
19.68
CO.LXZ
DESC
210999118GR GOLD RECIP BLADE
9X1X035X18 5 PK
SP UOM PRICE
[email protected] PG
37.22
A
LE.COX
IRWIN WOOD CUTTING RECIPROCATING
SAW BLADES
Roughing-in work and nail embedded wood. Use with materials 3/16" (5mm)
and thicker. 6TPI, available in 6", 9" and 12" blades.
AMERICAN SAW LENOX GOLD
RECIPROCATING BLADE
Features high quality bi-metal construction for added durability. It has T2
technology based tooth with wear resistant titanium coating to dissipate heat
and to offer sharp quicker cuts. Blade is ideal for cutting thick and medium
metals.
ITEM #
425601
DESC
SP UOM PRICE
[email protected] PG
37.22
A
LV.AYX
210989114GR GOLD RECIP BLADE
9X1X035X14 5PK
ITEM #
299383
299464
299405
299480
299324
DESC
372656 RECIPROCATING BLADE 6IN 6T BMETAL
372656P5 WOOD CUTTING RECIP BLADE 6IN
6T 5PK
372956 RECIPROCATING BLADE 9IN 6T BIMETAL
372956P5 WOOD CUTTING RECIP BLADE 9IN
6T 5PK
372156 WOOD CUTTING RECIP BLADE 12IN
6TPI
SP UOM PRICE
[email protected] CD 2.69
A
C.HYX
[email protected] PG
11.51
A
H.RHX
[email protected] CD 3.75
A
L.EXZ
[email protected] PG
16.89
A
CZ.LRX
[email protected] CD 4.67
A
O.CZX
AMERICAN SAW LENOX GOLD
RECIPROCATING BLADE
IRWIN WOOD CUTTING RECIPROCATING
SAW BLADES
Features high quality bi-metal construction for added durability. It has T2
technology based tooth with wear resistant titanium coating to dissipate heat
and to offer sharp quicker cuts. Blade is ideal for cutting thick and medium
metals.
Fast cutting for wood, composition material and plastic. Use with materials
3/16" (5mm) and thicker. 6 TPI, available in 6" only.
ITEM #
425602
DESC
21089960GR GOLD DEMO 5PK RECIP BLD
9X7/8X062X10T
www.wallacehardware.com
SP UOM PRICE
[email protected] PG
51.82
A
OV.YZX
ITEM #
299332
299448
DESC
SP UOM PRICE
2.38
C.EAX
10.95
H.VEX
372606 METAL & WOOD CUT RECIP BLADE 6IN [email protected] CD
6TPI
A
372606P5 METAL/WOOD CUT RECIP BLADE
[email protected] PG
6IN 6T 5PK
A
1-800-776-0976 NOVEMBER
2016
189
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
IRWIN METAL AND WOOD CUTTING
RECIPROCATING SAW BLADE
IRWIN SPECIALTY RECIPROCATING
BLADES
Metal and wood cutting cuts composition materials, plastic, pipe carbon steel
and stainless steel. Use with materials 1/8" and thicker. 10 TPI. Available in 6",
8" and 12".
Designed for Hardiplank, fiberglass & cement board.
Bi-metal contstruction for faster cutting and added
durability. Precision set teeth for faster, smoother cuts.
8% colbalt keeps teeth sharp longer. Designed For
Hardiplank, Fiberglass & Cement Board.
ITEM #
299340
299391
299472
299316
DESC
372610 METAL & WOOD CUT RECIP BLADE 6IN
10TPI
372810 RECIPROCATING BLADE 8IN 10T BIMETAL
372810P5 METAL & WOOD RECIP BLADE
8IN10T 5PK
372110 METAL & WOOD CUT RECIP BLADE 12IN
10TPI
SP UOM PRICE
[email protected] CD 2.25
A
C.EXZ
[email protected] CD 2.61
A
C.HVX
[email protected] PG
11.38
A
H.EYX
[email protected] CD 4.04
A
L.HXZ
ITEM #
238317
238341
238333
238376
IRWIN METAL CUTTING RECIPROCATING
SAW BLADE
DESC
372606C SPECIALTY
RECIP BLADE 6IN
6TPI CARBIDE
372645F SPECIALTY
RECIP BLADE 6IN
6TPI FLEAM
372803C SPECIALTY
RECIP BLADE 8IN
3TPI CARBIDE
372945F RECIP
BLADE 9IN 4/5TPI
FLEAM
INFO
DESIGNED FOR
HARDIPLANK, FIBERGLASS
& CEMENT BOA
DESIGNED FOR GENERAL
PURPOSE, WOOD & METAL
CUTTI
DESIGNED FOR
HARDIPLANK, FIBERGLASS
& CEMENT BOA
DESIGNED FOR PRUNING
AND FAST WOOD CUTTING
SP UOM PRICE
[email protected] CD 12.12
A
A.LAX
[email protected] CD
A
3.65
L.VXZ
[email protected] CD
A
8.94
E.YRX
[email protected] CD
A
8.32
E.EZX
Cuts all metals including nonferrous pipe conduit, stainless and sheet metals.
Use with materials 1/8" - 1/2" (3.2-13mm) thick. 14, 18 and 24 TPI available in
4", 6" and 8" blades.
ITEM #
299359
299367
299375
299456
238279
DESC
372614 METAL CUTTING RECIP BLADE 6IN
14TPI
372618 RECIPROCATING BLADE 18T 6IN BIMETAL
372624 RECIPROCATING BLADE 6IN 24TBIMETAL
372624P5 METAL CUTTING RECIP BLADE 6IN
24T 5PK
372818 METAL CUTTING RECIP BLADE 8IN
18TPI
SP UOM PRICE
[email protected] CD 2.04
A
C.ORX
[email protected] CD 2.04
A
C.ORX
[email protected] CD 2.38
A
C.EAX
[email protected] PG
10.42
A
R.YEX
[email protected] CD 3.09
A
L.XRX
IRWIN DEMOLITION RECIPROCATING
SAW BLADE
Use with 1/8" and thicker pipe, carbon steel, stainless steel and wood.
Electronic beam weld for stronger, longer lasting teeth. Bimetal construction
for faster cutting and added durability. Precision set teeth for faster, smoother
cuts. 8% cobolt keeps teeth sharper, longer.
ITEM #
366447
DESC
SP UOM PRICE
5.98
A
O.YZX
4935012 DEMOLITION RECIP BLADE 12IN 6TPI [email protected] EA
IRWIN DEMOLITION RECIPROCATING
SAW BLADE
Use with 1/8" and thicker pipe, carbon steel, stainless steel and wood.
Electronic beam weld for stronger, longer lasting teeth. Bimetal construction
for faster cutting and added durability. Precision set teeth for faster, smoother
cuts. 8% cobolt keeps teeth sharper, longer.
ITEM #
238260
299421
299499
299413
190
DESC
SP UOM PRICE
372666 DEMOLITION RECIP BLADE 6IN 6TPI [email protected] CD 4.40
B-METAL
A
L.YOX
372966 DEMOLITION RECIP BLADE 9IN 6T BI- [email protected] CD 5.40
METAL
A
O.RXZ
372966P5 DEMOLITION RECIP BLADE 9IN 6T [email protected] PG 24.44
5PK
A
CR.LYX
372960 DEMOLITION RECIP BLADE 9IN 10T
[email protected] CD 4.57
BI-METAL
A
O.XVX
IRWIN 11 PIECE RECIPROCATING BLADE KIT
With bonus blade bag. Features bi-metal, professional blades
designed for fast cuts and long cutting life. Kit consists of 1 9in., 6TPI, nail embedded wood cutting blade, 5 - 6in., 6TPI nail
embedded wood cutting blades, 1 - 8in., 18TPI metal cutting
blade and 4 - 6in., 14TPI metal cutting blades.
ITEM #
366609
DESC
4935496 RECIP KIT 11PC C
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
24.25
CR.CHX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
SKIL/BOSCH UGLY WOOD
RECIPROCATING BLADE
SKIL/BOSCH BI-METAL STRAIGHT
RECIPROCATING SAW BLADE
Pack of 5- 9" blades. 4-5 TPI, useful for very fast cutting in wood, pressure
treated lumber, wet wood, composition board and plywood. Also handy for
pruning.
1" blade width and thick kerf results in straighter cuts with less vibration.
Patent pending 2 x 2 tooth geometry cuts 30% faster in metal than standard
metal cutting blades. 7 x 1 x .05, 8+10 teeth per inch, 5 per package.
ITEM #
007250
ITEM #
248010
DESC
SP
[email protected]
94100 RECIP BLADE UGLY WOOD 9IN
UOM
EA
A
PRICE
4.64
L.YLX
DESC
RSM7X2 BLADE RECIP BIM 7IN 5PK
SP
[email protected]
UOM
PG
A
PRICE
17.76
CZ.CAX
SKIL/BOSCH BI-METAL RECIPROCATING
SAW BLADE
SKIL/BOSCH BI-METAL DRYWALL AND
PLASTER RECIPROCATING BLADE
Designed to cut tear-free in drywall and plasterboard. 6 x 3/4 x .05 6 teeth per
inch. 5 per package.
For wood with nails. Extra wide blade for straight cuts and low vibration in
wood and wood with nails. Exaggerated front tooth and taper-back design
makes for easier plunge cuts and easier starts in less accessible locations. 6
teeth per inch. 5 blades per package.
ITEM #
248088
ITEM #
248029
RHN66 BLADE RECIP BIMETAL 6IN
SP
[email protected]
248037
RHN96 BLADE RECIP 9IN 5PK
[email protected]
DESC
SP
[email protected]
RDW66 BLADE RS DRYWALL 6IN 5PK
UOM
PG
A
PRICE
12.79
A.XEX
Flush for heavy metal. Metal blades are color coded light blue for easy
identification. 5 degree tilt angle for faster cuts, longer life and overall
improved performance. 1" blade height and thicker body for straight cuts with
less vibration. Specs: 9/12 teeth per inch, Kerf 035", Length 10". Material bimetal. 5 per pack.
DESC
RFM10V BLADE RECIP 10IN 5PK
SP
[email protected]
UOM
PG
A
PG
A
PRICE
18.27
CZ.VLX
24.39
CE.LVX
SKIL/BOSCH RESCUE & DEMOLITION
RECIPROCATING SAW BLADES
SKIL/BOSCH BI-METAL RECIPROCATING
BLADES
ITEM #
205818
DESC
UOM
PG
A
PRICE
19.58
CL.OLX
Thicker and wider blade designed for maximum durability in rescue and
demolition applications. Bi-metal, highly flexible. Fluorescent coating "glows"
for high visibility in extreme conditions. Can be used for wood, metal, nonferrous metals, aluminum and plastic. 10-14 teeth per inch.
ITEM #
248096
RRD6V BLADE RCP BIMTL 6IN 5PK
DESC
SP
[email protected]
248126
RD12V BLADE RCP 10/14T 12IN 5
[email protected]
UOM
PG
A
PG
A
PRICE
19.82
CL.VAX
27.78
CH.VAX
DEWALT WOOD CUTTING
RECIPROCATING SAW BLADE
SKIL/BOSCH BI-METAL LIGHT MATERIAL
RECIPROCATING BLADE
A single blade designed to cut all light materials, (plywood, sheet metal,
plastic, veneers, asphalt, roofing, siding, fiberglass, and conduit), improving
accuracy and saving time with fewer blade changes. 14-18 teeth per inch.
Raker tooth pattern keeps blade in the cut, minimizing vibration. +6 degree
angle for fast cuts through the toughest material. Specially formulated antistick coating minimizes friction. Reinforced shoulder of tooth provides
increased durability when cutting through nails and other foreign objects. 6"
length, 6 TPI, Taper body.
ITEM #
247995
ITEM #
607614
DESC
RCTM6X2 BLADE RCP BIM 6IN 5PK
www.wallacehardware.com
SP
[email protected]
UOM
PG
A
PRICE
16.02
CX.XAX
DESC
DW4802B RECIP SAW BLADE 6IN 6TPI
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
1.58
C.VCX
191
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
DEWALT METAL CUTTING
RECIPROCATING SAW BLADE
JMK/IIT 10 PIECE RECIPROCATING
BLADE SET
Optimal tooth pattern helps increase speed and reduce vibration. Tooth
geometry is designed to wear more consistently. Specially formulated antistick coating minimizes friction for faster, smoother cuts. 6" length, 14 TPI,
straight body type.
Universal 1/2" shank. Set contents: 2 pc. 8" x 7 tpi
wood cutting, 4 pc. 6" x 7 tpi wood cutting, 2 pc. 6-1/2" x 18 tpi metal cutting, 2
pc. 6" x 24 tpi metal cutting.
ITEM #
618470
DESC
DW4808B RECIP SAW BLADE 6IN 14TPI
SP
[email protected]
UOM
EA
A
PRICE
1.41
C.LRX
ITEM #
128295
19700 SET BLADE RECIP 10PC
DESC
SP
[email protected]
456861
900404 REMODELING KIT
[email protected]
UOM
ST
A
EA
A
PRICE
8.78
E.LCX
35.66
LO.HZX
SPYDER 6" RECIPROCATING SAW BLADE
ARTU TUNGSTEN CARBIDE GRITTED
RECIPROCATING BLADES
Saws through brick, cast metals, ceramic tile, composites, fiberglass,
flagstones/slate, hardwood, laminates, marble, plaster, plywood, PVC,
reinforced cement. Cuts tough materials that other blades won't scratch.
Never needs resharpening. Tough and long lasting. Can cut all types of cast
metals and in awkward situations. Resistant to heat and abrasion. Fits all
popular makes of power tools.
ITEM #
169676
DESC
01806 RECIP BLADE 4IN
SP
[email protected]
119504
01810 RECIP BLADE 6IN
[email protected]
119512
01814 RECIP BLADE 8IN
[email protected]
169684
01818 RECIP BLADE 9IN
[email protected]
119520
01822 RECIP BLADE 12IN
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
PRICE
6.40
O.ERX
6.97
O.AHX
8.50
V.HLX
9.28
E.CRX
11.25
R.LEX
Univeral blade fits all reciprocating saws. 6" 7 TPI (bottom) 7 TPI (top)
wood blade. Additional reversed tooth configuration on top of the blade
enables cuts on both the push and pull motion for more efficient cuts.
Double edged, 1.23mm thick, bi-metal blade allows multi-directional cuts
without flipping your saw over, saving time and energy. Rounded tip with
teeth allows plunge cuts eliminating the need for pilot holes.
ITEM #
338109
338265
353418
353426
353566
353574
353582
353590
353604
353612
DISSTON REMGRIT CARBIDE GRIT RECIP SAW BLADE
6 x 3/4 x .032, coarse, 150 x 20 x 0,90mm. Cuts extremely hard
abrasive materials. The cutting edge of tungsten carbide particles is
permanently bonded to an alloy steel back. These blades have high heat
and abrasion resistance. There are no teeth to dull or chip and the
blades cut on both strikes. Resists snagging and are always smooth
cutters.
ITEM #
523828
169668
523852
192
DESC
SP UOM PRICE
GR24BL RECIP SAW BLADE-COARSE GRIT 6IN [email protected] EA 5.54
A
O.RYX
01800 RECIP BLADE SET 3PC
[email protected] CD 27.16
A
CE.XYX
GR26BL RECIP SAW BLADE-COARSE GRIT 8IN [email protected] EA 6.71
A
V.VHX
353620
353639
353647
353655
353663
353671
353795
353884
353914
DESC
200001 SPYDER 6IN 7TPI/7TPI RECIP SAW
BLAD
200002 SPYDER 3PK 6IN N 7TPI/7TPI RECIP
SAW BL
200003 SPYDER 6IN 7TPI/10TPI RECIP SAW
BLA
200004 SPYDER 6IN N 7TPI/10TPI RECIP SAW
B
200005 SPYDER 6IN N 10TPI/14TPI RECIP
SAW
200006 SPYDER 3PK 6IN N 10TPI/14TPI
RECIP SAW
200007 SPYDER 8IN 7TPI/7TPI RECIP SAW
BLAD
200008 SPYDER 3PK 8IN N 7TPI/7TPI RECIP
SAW BL
200009 SPYDER 8IN 7TPI/10TPI RECIP SAW
BLA
200010 SPYDER 3PK 8IN 7TPI/10TPI RECP
SAW BLAD
200011SPYDER 8IN 10TPI/14TPI RECIP SAW
BL
200012 SPYER 3PK 8IN IN 10TPI/14TPI RECIP
SAW
200013 SPYDER 10IN N 7TPI/7TPI RECIP SAW
BL
200014 SPYDER 3PK 10IN 7TPI/7TPI RECIP
SAW BLAD
200015 SPYDER 10IN 7TPI/10TPI RECIP SAW
BLA
200016 SPYDER 3PK 10IN N 7TPI/10TPI RECIP
SAW B
200017 SPYDER 10IN 10TPI/14TPI RECIP SAW
BL
200018 SPYDER 3PK 10IN 10TPI/14TPI RECIP
SAW BL
200096 SPYDER MULTI-3PK RECIP SAW
BLADE
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] CD 3.78
A
L.ELX
[email protected] CD 11.03
A
H.OEX
[email protected] CD 3.78
A
L.ELX
[email protected] CD 11.03
A
H.OEX
[email protected] CD 3.78
A
L.ELX
[email protected] CD 11.03
A
H.OEX
[email protected] CD 4.73
A
O.CEX
[email protected] CD 13.23
A
A.ALX
[email protected] CD 4.73
A
O.CEX
[email protected] CD 13.23
A
A.ALX
[email protected] CD 4.73
A
O.CEX
[email protected] CD 13.23
A
A.ALX
[email protected] CD 5.99
A
O.YZX
[email protected] CD 16.80
A
CZ.LXZ
[email protected] CD 5.99
A
O.YZX
[email protected] CD 16.80
A
CZ.LXZ
[email protected] CD 5.99
A
O.YZX
[email protected] CD 16.80
A
CZ.LXZ
[email protected] CD 14.91
A
Y.YVX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
SPYDER SCRAPER BLADE ATTACHMENT
SPYDER SCRAPER BLADE ATTACHMENT
MULTIPACK
For 4 in. scraping tasks on semi-tough materials. Fits all
reciprocating saws, insert as you would a standard blade.
Made from carbon steel that can be sharpened.
ITEM #
354155
DESC
108 SPYDER SCRAPER 4IN
SP
[email protected]
UOM
CD
A
Power Saws, Blades and Accessories,
Reciprocating Saws, Reciprocating Saw
Blades
2in., 4 in. and 6 in. blades. Fits all reciprocating saws,
insert as you would a standard blade. Made from
carbon steel that can be sharpened.
PRICE
11.03
H.OEX
ITEM #
354171
DESC
134 SPYDER SCRAPER MULTIPACK
SP
[email protected]
UOM
CD
A
PRICE
29.40
CY.RXZ
Power Saws, Blades and Accessories,
Reciprocating Saws, Bandsaw Blades
SPYDER SCRAPER BLADE ATTACHMENT
LENOX PORTABAND BAND SAW BLADE
6 in. blade, for large scraping projects with softer
materials. Fits all reciprocating saws, insert as you
would a standard blade. Made from carbon steel that
can be sharpened.
ITEM #
354163
DESC
137 SPYDER SCRAPER 6IN
SP
[email protected]
UOM
CD
A
PRICE
13.13
A.HEX
Long Lasting: High speed steel teeth provide a strong,
long lasting cutting edge. Shatter Resistant: Bi-metal
blades bend and resist breaking and extend blade life.
Exceptional Value: Professional performance and competitive pricing provide
extraordinary cost-per-cut value.
ITEM #
365505
365513
365521
SPYDER SCRAPER BLADE ATTACHMENT
DESC
38429 PORTABAND BLADE 38PW14-1 3'87/8X1/2X020
3843138PW181 PORTABAND BLADE 3'87/8X1/2X020
3843238PW241 PORTABAND BLADE 3'87/8X1/2X020
SP UOM PRICE
[email protected] EA
6.72
A
V.VAX
[email protected] EA
6.72
A
V.VAX
[email protected] EA
6.77
A
V.ELX
2 in. blade, for accurate, precision scraping and chiseling. Fits all
reciprocating saws, insert as you would a standard blade. Made from
carbon steel that can be sharpened.
ITEM #
354139
DESC
138 SPYDER SCRAPER 2IN
SP
[email protected]
UOM
CD
A
PRICE
9.18
R.CLX
VERMONT AMERICAN BENCH TOP
BANDSAW BLADES
Fits 59-1/2" machine models including B & D #94-11. Scroll cutting. Fine Scroll
Cutting In Plywoods, Thin Veneers, Plastics And Compositions. Gauge .012;
1/8" Width.
SPYDER 3-PACK RECIPROCATING SAW
ATTACHMENT STARTER KIT
ITEM #
347531
Kit includes: 1-1/16 in. + Spyder Grout-Out, 2 in. Spyder
scraper and 6 in. Spyder bore-blade. Grout-out tool has
a carbide-grit edge for removing any grout, including
urethane and epoxy. 2 in. scraper is made of carbon steel and can be
resharpened with any conventional sharpener. 6 in. Spyder bore-blade allows
you to plunge cut and cut both forward and backward with ease. Just insert
tools as you would a standard reciprocating saw blade.
ITEM #
354236
DESC
174 SPYDER STARTER KIT
www.wallacehardware.com
SP
[email protected]
UOM
CD
A
347620
347752
DESC
31142
BANDSAW
BLADE 1/8IN-15T
31147
BANDSAW
BLADE 1/4IN-6T
31158
BANDSAW
BLADE 3/8IN-6T
INFO
FINE SCROLL CUTTING IN
PLYWOODS, THIN VENEERS, P
SP UOM PRICE
[email protected] CD 12.95
A
H.AOX
WOOD CUTTING. GENERAL
PURPOSE, FAST CUTTING IN A
[email protected] CD
A
12.49
H.AOX
HARD WOOD CUTTING. HEAVYDUTY CUTTING IN ALL WOO
[email protected] CD
A
12.95
H.YXZ
PRICE
20.01
CO.OVX
1-800-776-0976 NOVEMBER
2016
193
Hand & Power Tools
Power Saws, Blades and Accessories,
Reciprocating Saws, Bandsaw Blades
Power Saws, Blades and Accessories, CutOff Saws and Blades, Cut-Off Wheels
VERMONT AMERICAN BENCH TOP
BANDSAW BLADES
GATOR FINISHING PRODUCTS CUT-OFF
BLADE
Fits 62" machine models including S-B POWER TOOLS #3104 and Sears #10324556. Scroll cutting. Wood cutting. General purpose, fast cutting in all woods,
plastics and compositions. Gauge: .012. 1/4" width.
Masonry cutting blade for angle grinders.
2 4-1/2" x 0.045" x 7/8"
ITEM #
347833
ITEM #
345547
583006
DESC
INFO
31187 BANDSAW
BLADE 1/4IN-6T
31265
FAST CUTTING IN ALL WOODS,
BANDSAW
PLASTICS AND COMPOSIT
BLADE 1/4IN-6T
SP UOM PRICE
[email protected] CD 13.49
A
A.CAX
[email protected] CD 14.95
A
Y.LRX
Power Saws, Blades and Accessories,
Compound Miter Saws and Blades, Electric
Compound Miter Saws
DEWALT HEAVY DUTY COMPOUND
MITER SAW
13.0 Amp. Electric brake. 4000 RPM. Ball bearing
construction. Stainless steel Miter scale pin with 9
positive stops. Precision miters 0-48 degrees, right and
left. 0-48 degrees bevel capacity. Head lock down,
carrying handle. Spindle lock. Includes 32 tooth carbide blade and blade
wrench. Automatically retracting lower guard. Capacity 6-5/8".
ITEM #
539481
DESC
DW715 COMPOUND MITER SAW 12IN
SP UOM
[email protected] EA
A
PRICE
371.26
OZC.VAX
Power Saws, Blades and Accessories, CutOff Saws and Blades, Cut-Off Wheels
GATOR FINISHING PRODUCTS CUT-OFF
BLADE
Masonry cutting blade for angle grinders.
2 4" x 0.045" x 5/8"
ITEM #
345520
345539
194
DESC
345555
DESC
SP UOM PRICE
1.89
C.CLX
1.89
C.CLX
9610 MASONRY CUTNG WHEEL 4-1/2 X .045 X [email protected] EA
7/8 IN
A
9611 METAL CUTTING WHEEL 4-1/2 X .045 X
[email protected] EA
7/8 IN
A
VERMONT AMERICAN ABRASIVE
MASONRY CUTTING CIRCULAR SAW
BLADES
Made of resinoid-bonded silicon carbide for cutting all
types of masonry, concrete, concrete block, brick,
limestone, sandstone, tile, cast iron and non-ferrous metals. The choice of
contractor, carpenters, repairmen, mechanics, farmers and home craftsmen.
ITEM #
357073
28001 MASNRY SAW BLADE 6-1/2IN
DESC
SP
[email protected]
362336
28003 MASONRY SAW BLADE 8IN
[email protected]
311553
28005 MASONRY SAW BLADE 10IN
[email protected]
334103
28052 SAW BLADE 7 7-1/4IN
[email protected]
321869
28020 MASONRY SAW BLADE 14IN
[email protected]
UOM
CD
A
CD
A
EA
A
EA
A
EA
A
PRICE
3.85
L.VLX
5.95
O.RYX
11.95
H.OYX
2.79
C.HVX
12.95
H.YHX
UOM
EA
A
EA
A
PRICE
2.75
C.HLX
4.89
O.XCX
VERMONT AMERICAN ABRASIVE METAL
CUTTING CIRCULAR SAW BLADES
Made of resinoid bonded aluminum oxide, this blade
deburrs, cleans, slots, nicks and cuts all types of metal,
including steel, bronze, brass, copper, aluminum, iron
and wire products.
ITEM #
347396
28077 SAW BLADE 7-1/4IN 7-1/4IN
DESC
SP
[email protected]
341312
28050 METAL SAW BLADE 7-7-1/4IN
[email protected]
CAMPBELL HAUSFELD CUTTING DISCS
SP UOM PRICE
1.89
C.CLX
1.89
A
C.CLX
9600 MASONRY CUTTING WHEEL 4 X .045 X
[email protected] EA
5/8 IN
A
9601 METAL CUTTING WHEEL 4 X .045 X 5/8 IN [email protected] EA
For use with cut off tools TL1035 and PL2535.
ITEM #
098760
DESC
MP2879 5 PC CUTTING DISCS
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
EA
A
PRICE
2.59
L.XHX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories, CutOff Saws and Blades, Cut-Off Wheels
HOT MAX CUT OFF WHEELS
GATOR FINISHING PRODUCTS CUT-OFF
BLADE
Type 1. 3" diameter. 1/16" thickness. 1/4" arbor. 25,000
max RPM.
ITEM #
354252
354279
354287
354295
354317
354325
354368
356271
356379
356387
356395
DESC
22001 CUT OFF WHEEL TP-1 3IN X 1/16IN X
1/4IN
22002 CUT OFF WHEEL TP-1 3IN X 1/16IN X
3/8IN
22003 CUT OFF WHEEL TP-1 3IN X 1/32IN X
3/8IN
22004 CUT OFF WHEEL TP-1 4IN X 1/16IN X
3/8IN
22005 CUT OFF WHEEL TP-1 4IN X 1/16IN X
5/8IN
22006 CUT OFF WHEEL 4-1/2IN X 1/16IN X
7/8IN
22007 CUT OFF WHEEL TP-1 14IN X 3/32IN X
1IN
26019 CUT OFF WHEEL TP-1 4-1/2IN X 1/8IN X
7/8IN
26021 CUT OFF WHEEL TP-I 7INX1/8IN 5/8INF/STEEL
26022 CUT OFF WHEEL TP-1 12IN X 3/32IN X
1IN
26025 CUT OFF WHEEL TP-1 7INX1/8 X5/8IN
F/MASONRY
Power Saws, Blades and Accessories, CutOff Saws and Blades, Cut-Off Wheels
Metal cutting blade for circular saws, chop saws and
gas powered saws. 6-1/" x 3/32" x /8".
SP UOM PRICE
[email protected] EA
1.57
A
C.CVX
[email protected] EA
1.57
A
C.CLX
[email protected] EA
1.57
A
C.CVX
[email protected] EA
1.80
A
C.LYX
[email protected] EA
1.80
A
C.LYX
[email protected] EA
2.00
A
C.VOX
[email protected] EA
5.68
A
V.CVX
[email protected] EA
2.00
A
C.VRX
[email protected] EA
2.23
A
C.ROX
[email protected] EA
6.06
A
V.VLX
[email protected] EA
2.57
A
C.AHX
ITEM #
346004
346063
346489
346527
346551
346675
346624
346632
347310
DESC
SP UOM PRICE
2.45
C.VZX
2.35
A
C.OYX
9651 METAL CUTOFF WHEEL 8 X 1/8 X 5/8 IN
[email protected] EA
3.39
A
L.XLX
9660 METAL CUTOFF WHEEL 10 X 1/8 X 5/8 IN [email protected] EA 5.29
A
O.CEX
9671 METAL CUTOFF WHEEL 12 X 1/8 X 1 IN
[email protected] EA
6.79
A
V.XEX
9675 METAL CHOP SAW BLADE 12 X 3/32 X 1 IN [email protected] EA 6.55
A
O.YCX
9680 MASNRY CUTOFF WHEEL 14 X 1/8 X 1 IN [email protected] EA 7.09
A
V.LOX
9681 METAL CUTOFF WHEEL 14 X 1/8 X 1 IN
[email protected] EA
7.09
A
V.LOX
9685 METAL CHOP SAW BLADE 14 X 3/32 X 1
[email protected] EA
7.25
IN
A
V.OZX
96316 METAL CUTOFF BLADE 6-1/2 X 1/8 X 5/8 [email protected] EA
IN
A
9641 METAL CUTOFF WHEEL 7 X 1/8 X 5/8 IN
[email protected] EA
Power Saws, Blades and Accessories, CutOff Saws and Blades, Chop Saw Blades
VERMONT AMERICAN METAL CHOP SAW
BLADE
For cutting metal. 1" arbor.
GATOR FINISHING PRODUCTS CUT-OFF
BLADE
Masonry cutting blade for circular saws, chop saws and
gas powered saws. For cutting metal, masonry, and
asphalt.
2 6-1/2" x 1/8" x 5/8"
ITEM #
345997
346039
346322
346497
346543
DESC
SP UOM PRICE
2.45
C.VHX
2.35
A
C.OYX
9650 MASNRY CUTOFF WHEEL 8 X 1/8 X 5/8 IN [email protected] EA 3.39
A
L.XLX
9660 MASNRY CUTOFF WHEEL 10 X 1/8 X 5/8 [email protected] EA 5.29
IN
A
O.LCX
9670 MASNRY CUTOFF WHEEL 12 X 1/8 X 1 IN [email protected] EA 6.79
A
V.COX
9630 MASNRY CUTOFF BLADE 6-1/2 X 1/8 X 5/8 [email protected] EA
IN
A
9640 MASNRY CUTOFF WHEEL 7 X 1/8 X 5/8 IN [email protected] EA
ITEM #
321788
SP
[email protected]
UOM
EA
A
PRICE
10.49
R.LOX
Power Saws, Blades and Accessories, Table
Saws and Blades, Electric Table Saws
ROCKWELL SLIDING EXTENSION TABLE
Accessory for the RK7241S. Offers large cutting
capacity for those without room for a permanent setup. Easily attached and removed from the saw and
folds for compact storage/transportation. Fixed rip cuts
up to 36-3/4" wide; sliding cross cuts up to 26-3/4" and
taper ripping up to 26-3/4" run. Table saw not included.
ITEM #
325899
www.wallacehardware.com
DESC
28043 METAL CHOP SAW BLADE 14IN
DESC
INFO
RW9189 TABLE OPTIONAL TABLE INCREASES
SLIDE
THE RIP CAPACITY TO 36F/RK7241S
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
169.81
A
COE.AEX
195
Hand & Power Tools
Power Saws, Blades and Accessories, Table
Saws and Blades, Scroll Saw Blades
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaws
VERMONT AMERICAN SCROLL SAW
BLADES
POULAN 16" GAS WOODSMAN CHAIN
SAW
For sawing wood, plastic and nonferrous metals.
Precision sharpened to cut fine intricate shapes. Plain
and pin end styles to fit most popular machines. .022
Gauge, .110 Width, 5" Plain End Type, 4 Blades Per
Card.
34 cc Super Clean engine performance system provides longer air filter life,
reduced fuel consumption and increased power. Primer bulb for easy starting.
Ideal for firewood or tough jobs around the yard. 10.5 lbs.
ITEM #
541893
541907
541915
541923
541885
DESC
30402 SCROLL
SAW BLADE 15T
5IN
30404 SCROLL
SAW BLADE 10T
5IN
30406 SCROLL
SAW BLADE 9T 5IN
30408 SCROLL
SAW BLADE 15T
5IN
30416 SCROLL
SAW BLADE 15T
INFO
.022 GAUGE, .110 WIDTH, 5"
PLAIN END TYPE
ITEM #
149241
DESC
P3816 CHAIN SAW 967146301 34CC 16IN
SP UOM PRICE
[email protected] CD 3.89
A
L.VXZ
.028 GAUGE, .187 WIDTH, 5" [email protected] CD
PLAIN END TYPE
A
4.09
L.ELX
.020 GAUGE, .093 WIDTH, 5" [email protected] CD
PLAIN END TYPE
A
.022 GAUGE, .110 WIDTH, 5" [email protected] CD
PIN END TYPE
A
3.99
L.VAX
3.39
L.XRX
.015 GAUGE, .150 WIDTH, 23/4" PIN END TYPE
4.09
L.EZX
[email protected] CD
A
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaws
SP UOM
[email protected] EA
A
PRICE
156.18
CVZ.LEX
POULAN PRO 18" GAS CHAIN SAW
Powered by a 42cc 2-cycle gas engine and is outfitted
with an 18" steel bar. Some beneficial features include an anti-vibe handle and
overmolded rear handle to lessen operator fatigue, automatic chain oiler,
effortless start system, and the super clean air filtration system. A carrying
case and extra chain are included with this model, which is backed by a 2-year
warranty.
ITEM #
149284
DESC
PP4218A GAS CHAIN SAW 967185102 42CC
18IN
SP UOM PRICE
[email protected] EA
189.54
A
CHE.XRX
POULAN 14" GAS CHAIN SAW
Perfect for light cutting. Super Clean engine
performance system provides longer air filter life, reduced fuel consumption
and increased power. 33cc/2.0 c.i. engine. 14"/35cm sprocket-nose guide bar.
Primer bulb for easy starting. Gear-driven automatic chain oiler. Vertical
cylinder design. wide handle spacing for better control. Chain Type: 91 VJP
Powerhead. Weight: 11.8 lbs. Shipping weight: 16 lbs. Fully assembled.
ITEM #
291579
DESC
SP UOM PRICE
134.46
CLV.CYX
P3314 CHAIN SAW 2CYCLE 952802026 33CC [email protected] EA
14IN
A
POULAN 18" GAS WILD THING CHAIN
SAW
Wild Colors and superb performance will help tame the toughest cutting tasks.
Super Clean engine performance system provides longer air filter life, reduced
fuel consumption and increased power. Gear-driven automatic chain oiler.
Fully assembled with case. Wide handle spacing for better control. 10.5 lbs.
ITEM #
149268
DESC
P4018 GAS CHAIN SAW 952802151 40CC
18IN
SP UOM PRICE
[email protected] EA
165.27
A
CEL.RVX
POULAN 16" GAS CHAIN SAW
POULAN PRO 20" GAS CHAIN SAW
DuraLife 35cc engine. Heavy duty forged crankshaft
and connection rod. Super clean air filter system. Effortless pull starting
system. Patented tool-less chain tensioning. Pro style chain. Automatic chain
oiler. 16" bar length. Reduced vibration handle. 11,8 lbs. powerhead weight.
Excellent all around medium duty chainsaw ideal for
general property management and firewood cutting. It features a 50 cc, 2cycle engine with Super Clean air filter system, aluminum professional style
clutch cover for more durability, automatic gear driven oil pump, tool-less
access to the air filter and spark plug, reduced vibration handle with effortless
pull starting system, a double post chain brake for added safety and an onboard locking wrench holder is built into the rear handle. 20" bar length. Fully
assembled. Includes carry case. 2 year limited warranty.
ITEM #
104124
DESC
SP UOM PRICE
172.86
A
CEY.RZX
PP3816A CHAIN SAW 9671996401 35CC 16IN [email protected] EA
ITEM #
104167
196
DESC
PP5020AV CHAIN SAW 966055201 50CC
20IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
235.78
A
LCH.HZX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaws
POULAN WEED EATER CHAINSAW
OREGON CUTTING BAR AND CHAIN COMBO
40cc two cycle engine. 18 inch bar. Automatic oiler.
Includes carring cse. Fully assembled.
ITEM #
225871
DESC
952802036 P4018WT 2 CYCL CHAINSAW
18IN BAR
SP UOM PRICE
[email protected] EA
169.82
A
CEA.VCX
MTD CHAINSAW
Introducing the go-to chainsaw for the suburban
homeowner. Our most versatile gas model features a
42cc engine and comes with a sprocket-tipped 16" bar
and low-kickback chain for trimming and pruning
medium to large-size branches. The RM4216 Rebel
chainsaw has an adjustable automatic oiler that keeps the chain in precision
condition, while the die-cast chassis and pro-grade components make this one
durable machine. Comes with comfort wrap handles and a handy storage
case.
ITEM #
225644
*
NEW
225646
NEW
225648
NEW
225643
NEW
225645
NEW
225647
NEW
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaw Chains
and Bars
DESC
41AY427S983 CHAINSAW REM 42CC
16" (W-CASE)
41AY469S983 CHAINSAW REM 46CC
18" (W-CASE)
41BY80AG983 CHAINSAW REM 51CC
18" (W-CASE)
41CY425S983 CHAINSAW REM 42CC
14" (NO CASE)
41CY429S983 CHAINSAW REM 42CC
18" (W-CASE)
41DY462S983 CHAINSAW REM 46CC
20" (W-CASE)
SP UOM PRICE
[email protected] CS
139.99
A
COL.XZZ
[email protected] CS
179.99
A
CEO.RXZ
[email protected] EA
219.99
A
LXV.XZZ
[email protected] CS
119.99
A
CZH.RXZ
[email protected] CS
159.99
A
CVC.RXZ
[email protected] CS
199.99
A
CRZ.AXZ
All combinations feature low-kick premium chain. Double guard bars
have original equipment for chainsaw manufacturers. Triligual
packaging. Made in U. S. A. Chain types color coded for easy
selection.
ITEM #
310662
27856 COMBO BAR & CHAIN 14IN
DESC
SP
[email protected]
310670
30159 COMBO BAR & CHAIN 18IN
[email protected]
310689
37977 COMBO BAR & CHAIN 20IN
[email protected]
310697
39272 COMBO BAR & CHAIN 18IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
38.49
LE.AEX
55.49
OH.HYX
56.49
OA.OAX
54.49
OR.HCX
OREGON XTENDER KIT
The cutting team. Bar and chain combination, renews your saw's
performance. Add 2" or more to your saw's cutting capacity. All
combinations features Oregon low-kick design premium chain. Bar
sizes: 12" to 20". The Xtender adds efficiency without straining motor.
All models features Guard Tip bar to help reduce kickback except for
the 18" which is Symmetrical-nose, not Guard tip.
ITEM #
312584
27859 BAR & CHAIN COMBO 14IN
DESC
SP
[email protected]
312312
27851 BAR & CHAIN COMBO 16IN
[email protected]
312320
27853 BAR & CHAIN COMBO 16IN
[email protected]
312290
27857 BAR & CHAIN COMBO 16IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
PRICE
38.49
LR.CXZ
49.95
OZ.ALX
49.95
OZ.ALX
43.49
LY.LAX
OREGON CHAIN SAW CHAIN
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaw Chains
and Bars
OREGON CUTTING POLE SAW CHAIN
8 in. chain fits Poulan and Remington brands pole saws. UL
classified low-kickback saw chain. Made in USA at ISO
certified facility. Advanced technology ensures tough, sharp
cutters. Smooth cutting.
ITEM #
512427
DESC
R34 CHAIN FOR POLE SAW 8IN R(90 MICROLITE)
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
12.87
A
A.HEX
Precision cutting chain, heat-treated, and hard-chromed cutter
chain. Unique cutter design cuts smooth and fast with
minimum kickback. Engineered for safety, performance, and
quality. Advanced technology ensures tough, sharp cutters.
Semi chisel.
ITEM #
512435
S40 CHAIN 10IN S(91 LOW PROFILE)
DESC
330906
S45 91SG-45C CHAIN 12IN
312576
S48 91VG-48C CHAIN 12IN
312479
S49 91VG-49C CHAIN 12/14IN
312487
S52 91VG-52C CHAIN 14IN
512478
S50 CHAIN 14IN S(91 LOW PROFILE)
312495
S53 91VG-53C CHAIN 14IN
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
15.33
A
CX.VLX
[email protected] EA
17.49
A
CZ.HEX
[email protected] EA
18.49
A
CL.EOX
[email protected] EA
18.95
A
CL.HXZ
[email protected] EA
19.95
A
CO.LHX
[email protected] EA
19.15
A
CL.YXZ
[email protected] EA
20.49
A
CO.AXZ
197
Hand & Power Tools
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaw Chains
and Bars
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaw Chains
and Bars
OREGON CHAIN SAW CHAIN (continued)
OREGON H, J & L- SERIES SAW CHAIN
ITEM #
312509
512486
310972
312517
312525
312533
312541
512494
493015
371157
512516
DESC
SP UOM PRICE
S54 91VG-54C CHAIN 14/16IN
[email protected] EA
20.95
A
CV.XZZ
S52-T CHAIN 14IN 2/PK S(91 LOW PROFILE) [email protected] PG
32.82
A
LZ.OLX
S55 CHAIN LOOP S91 16IN
[email protected] EA
21.49
A
CV.CZX
S56 91VG-56C CHAIN 16IN
[email protected] EA
21.49
A
CV.ORX
S57 91VG-57C CHAIN 16IN
[email protected] EA
21.95
A
CV.HZX
S59 91VG-59C CHAIN 16IN
[email protected] EA
22.49
A
CE.OVX
S60 91VG-60C CHAIN 18IN
[email protected] EA
22.95
A
CE.EAX
S56-T CHAIN 16IN 2/PK S(91 LOW PROFILE) [email protected] PG
35.20
A
LO.YOX
S62 91VG-62C CHAIN 18IN F/POUL
[email protected] EA
23.95
A
CE.AHX
S64 91VG-64C CHAIN 18IN
[email protected] EA
24.49
A
CR.EZX
S62-T CHAIN 18IN 2/PK S(91 LOW PROFILE) [email protected] PG
39.92
A
LH.CVX
The H, J & L-series (33,34, & 35 SL) chains are low-vibration
/ low-kickback chains which meet both the ANSI (U.S.) and
CSA (Canadian) low-kick requirements. These chains are
intended for homeowners or consumer users, but are an
excellent choice for anyone who cuts clean wood, uses a
saw that takes .325"-pitch cutting attachments, and wants the full measure of
safety afforded by a low-kickback chain. Patented steel.
ITEM #
310824
H72 CHAIN LOOP H33SL 18IN
DESC
SP
[email protected]
310832
H78 CHAIN LOOP H33SL 20IN
[email protected]
310840
J66 CHAIN LOOP J34SL 16IN
[email protected]
310905
J72 CHAIN LOOP J34SL 18IN
[email protected]
310913
J78 CHAIN LOOP J34SL 20IN
[email protected]
310948
L67 CHAIN LOOP L35SL 16IN
[email protected]
310956
L74 CHAIN LOOP L35SL 18IN
[email protected]
310964
L81 CHAIN LOOP L35SL 20IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
28.49
CY.LVX
30.95
LX.RHX
25.95
CH.RVX
28.49
CY.LVX
30.95
LX.AZX
26.49
CH.ERX
29.49
CY.OAX
31.95
LC.VAX
UOM
RE
A
PRICE
132.95
YX.OYX
OREGON D-SERIES SAW CHAIN
Oregon D-series (Vanguard) equals or beats competitive
chains in now-clear bucking, nose-buried bucking and
boring-while also meeting the ANSI low-kickback standard.
The new shape of speed and performance makes Vanguard
a chain for homeowners and professionals.
ITEM #
312371
D59 72SG-59C CHAIN 16IN
DESC
SP
[email protected]
312398
D60 72SG-60C CHAIN 16IN
[email protected]
084476
D66 CHAIN REPLACEMENT 18IN
[email protected]
312428
D70 72SC-70C CHAIN 20IN
[email protected]
310719
D72 CHAIN LOOP D72V 20IN
[email protected]
312444
D81 72SG-81C CHAIN 23/24IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
OREGON BULK CHAIN
25' Reel.
PRICE
23.49
CE.ACX
23.95
CE.AVX
26.49
CH.EAX
27.95
CA.VLX
28.49
CA.YOX
31.95
LC.HCX
The G-series (95VP) saw chain is part of a Micro-Lite
narrow-kerf cutting system that reqires less power from the
chain to cut than standard cutting systems. Patented steel.
G66 CHAIN LOOP G95VP 16IN
SP
[email protected]
310751
G72 CHAIN LOOP G95VP 18IN
[email protected]
198
DESC
UOM
EA
A
EA
A
DESC
S025U CHAIN LOW-PRFL .375
SP
[email protected]
OREGON BAR/CHAIN
ITEM #
312597
*
NEW
DESC
SP UOM PRICE
[email protected] EA
57.58
A
OA.HZX
584818 COMBO, 20IN BAR/ CHAIND72 ADVANCECUT
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chain Sharpeners
OREGON G-SERIES SAW CHAIN
ITEM #
310727
ITEM #
312355
NICHOLSON CHAIN SAW FILE
PRICE
25.95
CH.VRX
28.49
CA.AHX
Round smooth chain saw file is smooth-feeling and fast cutting. For
sharpening round hooded type teeth. Carded without handles.
ITEM #
377678
DESC
01888 CHAINSAW FILE 8INX7/32IN
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
CD
A
PRICE
3.38
L.EVX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chain Sharpeners
OREGON POWERSHARP STARTER KIT
Includes: the PowerSharp chain, PowerSharp guide bar and the BarMount Sharpener. PowerSharp chain features top-sharpening cutter
design that can be sharpened in seconds with the bar-mount
sharpener. PowerSharp guide bar has the alignment and latch pin holes
required for use with the bar-mount sharpener. Precise alignment
between the cutter and stone. PowerSharp chain stays sharp 3 times longer
compared to other Oregon 3/8 inch low-profile chain. Weather-resistant. 3/8
inch chain pitch. 50 dive lines. Gauge: .050 inch. Fits 14 inch Stihl chainsaw
models.
ITEM #
447897
DESC
541650 POWERSHARP KIT 14
BAR/SHARPENER/STONE/CHN
SP UOM PRICE
[email protected] KT
68.26
A
VR.VCX
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chain Sharpeners
OREGON POWERSHARP STARTER CHAINSAW
SHARPENING KIT
The PowerSharp kit is a precision sharpening system that sharpens on
the saw, on the job, in seconds. The PowerSharp bar-mounted
sharpener is made from durable and lightweight material and the large
spring loaded treaded foot allows users to apply controlled pressure
even against uneven surfaces. Unique top sharpening cutter provides
outstanding performance and the crescent-shaped sharpening stone is
designed to keep the unique PowerSharp saw chain sharp. The 16 inch guide
bar with twin guide holes to help secure the bar-mount sharpener in perfect
alignment with the chain, is designed with a slim symmetrical contour which is
lightweight, maneuverable and reversible for long life. Fit 16 inch Craftsman,
Poulan and Homelite chainsaw models.
ITEM #
447927
DESC
SP UOM PRICE
[email protected] KT
70.89
A
VA.LXZ
541656 POWERSHARP KIT 16
BAR/SHARPENER/STONE/CHN
OREGON POWERSHARP STARTER CHAINSAW
SHARPENING KIT
PowerSharp kit is a precision sharpening system that sharpens on the
saw, on the job, in seconds. The PowerSharp bar-mounted sharpener is
made from durable and lightweight material and the large spring loaded
treaded foot allows users to apply controlled pressure even against
uneven surfaces. Unique top sharpening cutter provides outstanding
performance and the crescent-shaped sharpening stone is designed to keep
the unique PowerSharp saw chain sharp. The 14 inch guide bar with twin guide
holes to help secure the bar-mount sharpener in perfect alignment with the
chain is designed with a slim symmetical contour which is lightweight,
maneuverable and reversible for long life. Fits 14 inch Craftsman, Poulan and
Homelite chainsaws.
ITEM #
447900
DESC
541652 POWERSHARP KIT 14
BAR/SHARPENER/STONE/CHN
SP UOM PRICE
[email protected] KT
68.26
A
VR.VCX
OREGON POWERSHARP CHAINSAW SHARPENING
KIT
The PowerSharp kit is a precision sharpening system that sharpens on
the saw, on the job, in seconds. The PowerSharp bar-mounted
sharpener is made from durable and lightweight material and the large
spring loaded treaded foot allows users to apply controlled pressure
even against uneven surfaces. Unique top sharpening cutter provides
outstanding performance and the crescent-shaped sharpening stone is
designed to keep the unique PowerSharp saw chain sharp. The 18 inch guide
bar with twin guide holes to help secure the bar-mounted sharpener in perfect
alignment wit the chain, is designed with a slim symmetrical contour which is
lightweight, maneuverable and reversible for long life. Fits 18 inch Craftsman,
Poulan and Homelite chainsaw models.
ITEM #
447935
DESC
SP UOM PRICE
[email protected] KT
73.51
A
VY.YAX
541662 POWERSHARP KIT 18
BAR/SHARPENER/STONE/CHN
OREGON POWERSHARP STARTER CHAINSAW
SHARPENING KIT
The PowerSharp kit is a precision sharpening system that sharpens on
the saw, on the job, in seconds. The PowerSharp bar-mounted
sharpener is made from durable and lightweight material and the large
spring loaded treaded foot allows users to apply controlled pressure
even against uneven surfaces. Unique top sharpening cutter provides
outstanding performance and the crescent-shaped sharpening stone is
designed to keep the unique PowerSharp saw chain sharp. The 16 inch guide
bar with twin guide holes to help secure the bar-mounted sharpener in perfect
alignment with the chain, is designed with a slim symmetrical contour which is
lightweight, maneuverable and reversible for long life. Fits 16 inch Stihl
chainsaw models.
ITEM #
447919
DESC
541655 POWERSHARP KIT 16
BAR/SHARPENER/STONE/CHN
www.wallacehardware.com
SP UOM PRICE
[email protected] KT
70.89
A
VA.LXZ
OREGON POWERSHARP SAW CHAIN AND
SHARPENING STONE
PowerSharp replacement chain for 14 inch chain on Homelite,
McCulloch and Remington saws. Contains replacement
PowerSharp chain and sharpening stone for bar-mount
sharpening system. Must use PowerSharp #539454 bar with
this chain. For 3/8 inch pitch low profile chain and .050 inch gauge cutting
systems. 50 drive links loop.
ITEM #
447943
DESC
PS50 POWERSHARP 14IN CHAIN & STONE
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
36.76
LV.YZX
199
Hand & Power Tools
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chain Sharpeners
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chain Sharpeners
OREGON POWERSHARP CHAINSAW CHAIN
AND SHARPENING STONE
OREGON POWERSHARP CHAINSAW CHAIN
AND SHARPENING STONE
The PowerSharp 14 inch replacement chain saw chain and
stone is part of the PowerSharp precision saw chain
sharpening system. The bar-mounted sharpener attaches
easily, and twin guide holes in the tip of the bar make
perfect alignment foolproof. The unique top-sharpening cutters contact the
stone and your chain is sharpened in a matter of seconds. Fits Craftsman,
Echo, Poulan and Homelite chainsaws. Works with Craftsman models
#315.3400, 315.3401 and 315.3402 and Poulan models #180, 210, 220 and
more.
Sharpening system features: 0.050 inch gauge construction.
The system includes an 18 inch L chain and a sharpening
stone for use with Craftsman, Poulan, Homelite and others.
Use with Craftsman #3407, 3411, 34094 and more, Homelite
#20, 3300, 20AV and more and Poulan #180, 200 and more. 62 drive links.
3/8 inch chain pitch.
ITEM #
447951
DESC
SP UOM
[email protected] EA
A
PS52 POWERSHARP 14IN CHAIN & STONE
ITEM #
448001
PRICE
36.76
LV.YZX
DESC
SP UOM
[email protected] EA
A
PS62 POWERSHARP 18IN CHAIN & STONE
PRICE
38.86
LR.VLX
Power Saws, Blades and Accessories,
Chainsaws and Chains, Grease Guns
OREGON GREASE GUN
Pre-loaded see-through gun delivers high-quality grease in measured
amounts. The simplest, most effective way to grease chain saw bar nose
bearings.
OREGON POWERSHARP SAW CHAIN AND
STONE
PowerSharp replacement chain for 16 inch chain on
McCulloch and Stihl saws. Contains replacement PowerSharp
chain and sharpening stone for bar-mount sharpening
system. Must use Power Sharp #539456 bar with this chain.
For 3/8 inch low pitch chain and .050 inch gauge cutting systems. 55 drive
links loop.
ITEM #
447978
DESC
PS55 POWERSHARP 16IN CHAIN & STONE
SP UOM
[email protected] EA
A
PRICE
37.81
LE.HXZ
ITEM #
312142
ITEM #
005712
005713
005715
PowerSharp 16 inch precision saw chain sharpening system
features a 16 inch bar length. It is designed for use with
Craftsman, Echo, Poulan and Homelite brand chainsaws and
is UL classified for safety. Works with Craftsman models
#315.3400 and #315.3401, Echo models #CS280 and #CS290 and Poulan
models #180, 210 and more. 16 inch bar length. 3/8 inch chain pitch. 56 drive
links.
200
DESC
SP UOM
[email protected] EA
A
UOM
EA
A
PRICE
10.49
H.XVX
DESC
LX-1153 PREM HVYDUTY DUAL LEVEG PISTL
GREASE
LX-1174 PUSHLUBE TRANSPARENT TUBE
GREASE
LX-1175 HANDYLUBER CRDLS GREASE GUN
12V 6-8K PSI
LX-1177 BATTERY, NI-CD 1500 MAH, 12V, DC
SP UOM PRICE
[email protected] EA
37.88
A
LZ.ALX
[email protected] EA
10.82
A
R.ELX
[email protected] EA
185.15
A
CXY.OZX
[email protected] EA
43.29
A
LR.XHX
Power Saws, Blades and Accessories,
Chainsaws and Chains, 2 Cycle Engine Oil
OREGON POWERSHARP CHAINSAW CHAIN
AND SHARPENING STONE
PS56 POWERSHARP 16IN CHAIN & STONE
SP
[email protected]
Just Added
005714
ITEM #
447994
DESC
26365 GUN GREASE
PRICE
37.81
LE.HXZ
MAXPOWER 2-CYCLE SYNTHETIC OIL
No smoke two-stroke oil is a premium synthetic air cooled 2
stroke oil which represents the newest generationin small engine
lubricating technology. it significantly increases performance by
virtually eliminating exhaust port blocking. 2.6 oz. size.
ITEM #
181501
381535
DESC
337126 2-CYCLE OIL 2.6OZ SYNTHETIC
33VP6818 VP FUEL MULTI- MIX GAS + OIL 2
CYC QT
1-800-776-0976 NOVEMBER
2016
SP UOM PRICE
[email protected] EA
2.75
A
C.AOX
[email protected] CN 10.77
A
H.XAX
www.wallacehardware.com
Hand & Power Tools
Power Saws, Blades and Accessories,
Chainsaws and Chains, 2 Cycle Engine Oil
Power Saws, Blades and Accessories,
Chainsaws and Chains, 2 Cycle Engine Oil
MAXPOWER PREMIUM 2-CYCLE ENGINE OIL
SPECTRUM 2-CYCLE OIL
Use for lawn mowers, gas trimmers, chain saws, snow blowers,
and all other 2 cycle engines.
Sta-Mix two cycle. 32:1 mix. For air cooled two stroke engines.
ITEM #
326720
337014 2-CYCLE OIL 2.6OZ PREMIUM
DESC
SP
[email protected]
326739
337010 2-CYCLE OIL 8OZ PREMIUM
[email protected]
326747
337011 2-CYCLE OIL 15.6OZ PREMIUM
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
1.54
C.XVX
2.46
C.RAX
6.92
V.HOX
OREGON 2-CYCLE ENGINE OIL
Universal mix. For all 2-cycle engines - weed trimmers, chainsaws, lawn
mowers, outboard motors, etc. Superior concentrated engine oil. Universal
mix. Sta-Mix.
ITEM #
695645
DESC
40092 OIL ENGINE 2CYCLE 1.8OZ
SP
[email protected]
UOM
EA
A
PRICE
2.18
C.VRX
DESC
SM3222SM 2-CYCLE OIL 32:1 4OZ
SP
[email protected]
Sta-Mix 50:1 Two Cycle Engine Lubricants meets or exceeds
manufacture's requirements for all ratios up to 50:1. For use in all
two cycle engines, and for unleaded fuel.
ITEM #
483850
SM5101SM 2-CYCLE OIL 50:1 6.4OZ
SP
[email protected]
149918
SM5102SM 2-CYCLE OIL 50:1 2.6OZ
[email protected]
100% virgin oil incorporated with improved additives especially
designed for today's high speed engines. Colored oil-you can
see at a glance that oil has been added to the fuel to protect
your engine. Designed to mix with either leaded or unleaded
gas which contains no alcohol. Six pack. Plastic bottles. 24 per case.
ITEM #
500445
SM4002SM 2-CYCLE OIL 40:1 3.2OZ
DESC
SP
[email protected]
576557
SM3248SM 2-CYCLE OIL 32:1 8OZ
[email protected]
576565
SM1648SM 2-CYCLE OIL 16:1 8OZ
[email protected]
UOM
EA
A
EA
A
EA
A
PRICE
0.75
X.EYX
1.21
X.YVX
1.21
X.YVX
UOM
EA
A
EA
A
POULAN WEEDEATER BAR AND CHAIN OIL
PRICE
1.16
X.YCX
0.68
X.EOX
100% virgin base stock oils are used to insure consistent
quality of this lubricant and guarantee performance. Antisling additives hold the oil on the guide bar and chain to
extend the life of your equipment and increase performance.
ITEM #
381578
DESC
SP
[email protected]
952030130 BAR & CHAIN OIL - GALLON
SPECTRUM BAR & CHAIN LUBE
2-cycle oil is designed to extend engine life and to provide
smokeless exhaust. This special blend also includes a fuel
stabilizer which extends the usable life of gasoline. 40:1.
SAVE-A-CHAIN bar and chain lubricant is designed to be
used in all brands of chain saws. 1 Gallon.
ITEM #
168793
952030133 OIL 2-CYL 40:1 3.2OZ
SP
[email protected]
168785
952030128 OIL 2 CYC 40:1 8OZ
[email protected]
www.wallacehardware.com
PRICE
0.75
X.EYX
SPECTRUM AMERICAN HERITAGE 2-CYCLE
ENGINE OIL
POULAN 2-CYCLE OIL
DESC
UOM
EA
A
Power Saws, Blades and Accessories,
Chainsaws and Chains, Bar and Chain Oil
SPECTRUM 2-CYCLE 50:1 OIL
DESC
ITEM #
152250
UOM
EA
A
EA
A
PRICE
1.20
C.XZZ
3.01
L.ECX
ITEM #
528552
DESC
BC3004CL BAR & CHAIN OIL GAL
1-800-776-0976 NOVEMBER
2016
SP
[email protected]
UOM
GL
A
UOM
GL
A
PRICE
9.25
A.LHX
PRICE
8.53
R.HLX
201
Hand & Power Tools
Power Saws, Blades and Accessories,
Chainsaws and Chains, Bar and Chain Oil
SPECTRUM LOGGER'S SPECIAL BAR AND
CHAIN OIL
MAXPOWER CHAIN SAW WRENCH
Well suited as a general purpose chain lubricant,
especially for the lubrication of today's modern high
speed direct drive chain saws. Oils are equally effective
with solid or roller nose guide bars and on sprockets and
chains where oil is applied by manual or automatic oilers or similar devices.
ITEM #
576581
DESC
BC300401 BAR & CHAIN OIL GAL
SP
[email protected]
UOM
GL
A
PRICE
8.99
H.XAX
DESC
SP
[email protected]
UOM
QT
A
PRICE
2.57
L.XLX
PARMAN ENERGY XTREME BAR & CHAIN OIL
New Hi-Tack Formula. Industrial Grade Lubricant for Commercial
Cutters and Industrial Applications. Xtreme Summergrade (green)
is formulated using medium base oils and is the grade most
commonly used throughout the year. Affords easy pumping yet is
thick enough to cling tenaciously to bar and chain in heavy
commercial cutting. This is an oem grade product suitable for homeowner or
commercial cutter.
ITEM #
376507
DESC
565870 BAR/CHAIN OIL SUMMERGRADE 30
1GALLON
SP UOM PRICE
[email protected] GL
10.65
A
R.HXZ
AP AUTO BAR & CHAIN OIL
ITEM #
152352
152361
202
DESC
POLY75012 POLYGUARD BAR & CHAIN OIL
QUART
POLY75106 POLYGUARD BAR & CHAIN OIL
GAL
ITEM #
235903
235911
DESC
4218 CHAINSAW
WRENCH 19MMX13MM
5889 CHAINSAW
WRENCH 19MMX10MM
INFO
GUIDE BAR NUT SIZE IS
1/2" (13MM)"
SP UOM PRICE
[email protected] EA
4.03
A
L.RYX
[email protected] EA
6.20
A
V.CRX
Drills, Bits and Accessories, Augers, Hand
Drills and Bits, Auger Bits
Special analysis; highly polished. Double spurs and cutters; medium fast screw
pitch. Heat treated and tempered. Open throat design prevents clogging and
binding. For all-around wood boring. Cutting head coated with protective red
plastic which peels off easily. 1/4" to 1" packed in self-selling Sellopak display
jacket with hang-up tab. 7-1/2" through 9-1/2" overall length.
Bar and chain lubricant. Top performance. 1 quart bottle. 12 quarts
per case. 30W.
BC301201 BAR & CHAIN OIL QT
Spark plug socket size is 3/4" (19mm). Guide Bar Nut
Size Is 1/2" (13mm).
IRWIN AUGER BITS
SPECTRUM SUPER LUBE BAR & CHAIN OIL
ITEM #
576573
Power Saws, Blades and Accessories,
Chainsaws and Chains, Chainsaw Wrenches
SP UOM PRICE
[email protected] EA
2.91
A
L.CAX
[email protected] EA
11.28
A
A.RLX
ITEM #
306932
43605 AUGER BIT 5/16IN 62T
DESC
SP
[email protected]
306967
43608 AUGER BIT 1/2IN 62T
[email protected]
306975
43609 AUGER BIT 9/16IN 62T
[email protected]
306983
43610ZR AUGER BIT 5/8IN 62T
[email protected]
307009
43612 AUGER BIT 3/4IN 62T
[email protected]
307041
43616 AUGER BIT 1IN 62T
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
13.11
A.AOX
13.15
A.ARX
13.43
Y.XEX
13.79
Y.OXZ
14.74
Y.YOX
18.28
CL.OCX
IRWIN DUAL AUGER WOOD BITS
Dual-purpose shank for hand braces and electric drills. Single cutter and spur
design and specially designed screw point for faster, cleaner boring in all
types of hardwood. Precision ground from a special-alloy, highest quality tool
steel. Heat treated full length. 8-1/2" overall height-boring depth 6".
ITEM #
335886
49904 AUGER BIT I-100 1/4IN
DESC
SP
[email protected]
335894
49905 AUGER BIT I-100 5/16IN
[email protected]
335908
49906 AUGER BIT I-100 3/8IN
[email protected]
335916
49907 AUGER BIT I-100 7/16IN
[email protected]
335924
49908 AUGER BIT I-100 1/2IN
[email protected]
335932
49909 AUGER BIT I-100 9/16IN
[email protected]
335940
49910 AUGER BIT I-100 5/8IN
[email protected]
335959
49911 AUGER BIT I-100 11/16IN
[email protected]
1-800-776-0976 NOVEMBER
2016
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
11.99
A.CEX
11.99
A.CEX
12.07
A.XEX
12.25
A.LCX
12.16
A.CXZ
12.16
A.LRX
12.22
A.OCX
13.00
A.EYX
www.wallacehardware.com
Hand & Power Tools
Drills, Bits and Accessories, Augers, Hand
Drills and Bits, Auger Bits
IRWIN DUAL AUGER WOOD BITS (continued)
ITEM #
335967
DESC
49912 AUGER BIT I-100 3/4IN
SP
[email protected]
335975
49913 AUGER BIT I-100 13/16IN
[email protected]
335983
49914 AUGER BIT I-100 7/8IN
[email protected]
335991
49915 AUGER BIT I-100 15/16IN
[email protected]
336009
49916 AUGER BIT I-100 1IN
[email protected]
UOM
EA
A
EA
A
EA
A
EA
A
EA
A
PRICE
13.14
A.HRX
14.74
Y.AZX
15.05
CX.LVX
16.22
CX.YOX
16.50
CZ.XRX
Drills, Bits and Accessories, Augers, Hand
Drills and Bits, Auger Bits
VERMONT AMERICAN POWER AUGER
BITS
1 per card.
ITEM #
396893
18670 AUGER BIT 1/4IN X 7-1/2IN
DESC
SP
[email protected]
396915
18672 AUGER BIT 3/8IN X 7-1/2IN
[email protected]
396958
18675 AUGER BIT 9/16IN X 7-1/2IN
[email protected]
396966
18676 AUGER BIT 5/8IN X 7-1/2IN
[email protected]
396982
18678 AUGER BIT 3/4IN X 7-1/2IN
[email protected]
397024
18682 AUGER BIT 1IN X 7-1/2IN
[email protected]
UOM
CD
A
CD
A
CD
A
CD
A
CD
A
CD
A
PRICE
15.22
Y.RLX
11.74
H.VLX
12.49
H.ELX
12.49
H.RCX
13.49
A.OAX
17.49
CX.RLX
IRWIN AUGER BITS
For use in drilling applications where small nails and
other foreign materials may be encountered. Single
twist type with single cutter and side lip. Hollow center
twist design for fast, continuous flow of chips. Heat
treated full length. Guaranteed consistent Rockwell hardness. Cutting head
can be sharpened time and again for quick clean boring and longer life.
ITEM #
396206
396214
396222
396230
396249
396257
396265
DESC
SP UOM PRICE
25.87
A
CH.LEX
3043005 AUGER BIT W/ WELDTEC 1/2INX17IN [email protected] EA 26.69
A
CH.HYX
3043007 AUGER BIT W/ WELDTEC 5/8INX17IN [email protected] EA 28.54
A
CY.XOX
3043009 AUGER BIT W/ WELDTEC 3/4INX17IN [email protected] EA 31.96
A
LC.OCX
3043011 AUGER BIT W/ WELDTEC 7/8INX17IN [email protected] EA 35.57
A
LO.HCX
3043013 AUGER BIT W/ WELDTEC 1INX17IN
[email protected] EA
38.11
A
LE.VCX
3043014 AUGER BIT W/ WELDTEC [email protected] EA
47.38
1/8INX17IN
A
OC.HRX
3043004 AUGER BIT W/ WELDTEC 3/8INX17IN [email protected] EA
Drills, Bits and Accessories, Augers, Hand
Drills and Bits, Bit Sharpeners
JMKIIT DRILL BIT SHARPENER
Quick and easy to use. Fits onto drill. 16 sizes. Built-in
drill bit guide ensures sharpening at correct angle.
ITEM #
372684
DESC
25960 DRILL BIT SHARPENER
SP
[email protected]
UOM
EA
A
PRICE
13.84
A.LZX
Drills, Bits and Accessories, Power
Screwdrivers, Electric Screwdrivers
DEWALT 6 AMP VSR CORDED DRYWALL
SCREWDRIVER
Drop forged in one piece from special analysis steel; heat treated full
length. Medium slow screw pitch. Easy reading size markings; positive
blade lock. Highly polished finish. In white plastic pouch clear front. hang
up hole. Instruction printed on back of pouch. 1 cutting: 7/8"?1-3/4"; 1
cutting: 1-3/4" ? 3". Large size with 2 cutters
Helical-cut steel, heat-treated gears for long life and
durability. Depth-sensitive "set and forget" nosepiece
for consistent fastener depth. Two-finger, rubber
trigger for increased comfort. Hi-speed transmission for production drywall
hanging. Lightweight with excellent ergonomics. Specifications: Amps: 6.0. No
Load Speed: 0-5300 rpm. Clutch: Standard. Torque (in/lbs). 60 in/lbs. Max
Fastener Size: #8. Tool Weight; 2.9 lbs.
ITEM #
306649
ITEM #
097128
IRWIN EXPANSIVE AUGER BITS
DESC
45002 DRILL PRESS ADJUSTABLE WOOD BIT
www.wallacehardware.com
SP UOM PRICE
[email protected] EA
50.17
A
OV.LYX
DESC
DW255 DRYWALL SCREWDRIVER 6AMP
1-800-776-0976 NOVEMBER
2016
SP UOM
[email protected] EA
A
PRICE
101.58
YX.RYX
203
Hand & Power Tools
Drills, Bits and Accessories, Power
Screwdrivers, Cordless Screwdrivers
BLACK & DECKER LITHIUM OFFSET
SCREWDRIVER
SKIL 12