Crestron MPC-M10/20/25 Media Presentation Controller MPC Media Presentation Controller™: MPC-M10/20/25 Purpose The purpose of this addendum is to provide additional information not supplied with the original MPC-M10/20/25 Operations & Installation Guide (Doc. 6701B). Specifically, this addendum provides for additional “Available Accessories” in the MPC-M10/20/25 “Specifications” table, which appeared on page 7. Specifications In the “Specifications” section, the “Available Accessories” information should read as follows: Available Accessories Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com C2N-MNETGW infiNET Gateway C2N-VEQ4 4-Channel Volume/EQ Module CLS-C6(M) iLux Integrated Lighting System CLW-DIM Series Wall Mount Dimmers CLW-DIM1RF infiNET Dimmer CLW-SW Series Wall Mount Switches CLW-SW1RF infiNET Switch CNSP-XX Custom Serial Interface Cable IRP2 IR Probe MP-B10 Media Presentation Button Panel B10 MP-B20 Media Presentation Button Panel B20 MP/MPC/IPAC_FRONT_LABEL(BLANK, ENGRAVED)-B-T Set of custom engravable backlit labels, white on black MP/MPC/IPAC_FRONT_LABEL(BLANK, ENGRAVED)-W-T Set of custom engravable backlit labels, black on white Addendum #1 for DOC. 6701B 09.08 Specifications subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project