Solid State 2004 PRICE
TRADE PRICE LIST
JULY 200
2004
TRADE PRICE LIST
Specialist
Electrical
JULY Installation
2004
Company
This price list applies to all orders placed for delivery on or after 1st July 2004 and supercedes all previous
Solid State price lists.
Prices shown are our current trade prices in pounds (£) Sterling. Trade discounts may apply - contact
ourSales office for details.
Standard carriage is free on orders over £300.00 nett goods. Standard carriage on orders less than
£300.00 nett goods will be charged at £8.50 (UK mainland only). Carriage charges for other areas are
available on request.
An inspection and restocking charge of 15% will be made on returns (minimum £5.00 per consignment).
Minimum invoice value = £20.00 + VAT. VAT is charged extra at the current rate.
All goods supplied and services provided are subject to our standard Conditions of Sale, copies of which
are available on request.
Errors and omissions excepted. Every effort has been made to ensure the accuracy of this price list but no
responsibility can be accepted by Solid State for any mistakes.
Orders can be placed by telephone, fax or email using the details shown below:-
01257 463018
01257 462038
[email protected]
www.solidstatesecurity.co.uk
solidstatesecurity
Visit our website at
page 2
www.
.co.uk
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONTENTS
CONVENTIONAL FIRE ALARM EQUIPMENT
CFP Standard 2-8 Zone Conventional Fire Panels (to EN54-2/4) .......................................................................... 4
CFP Economy 2-8 Zone Conventional Fire Panels (to EN54-2/4) .......................................................................... 4
CFP LPCB Approved 2-8 Zone Conventional Fire Panels (to EN54-2/4) ................................................................ 4
EFP Single Zone Conventional Fire Panels (to BS5839-4) ...................................................................................... 5
FP 2-14 Zone Conventional Fire Panels (to BS5839-4) .......................................................................................... 5
MFP 4-28 Zone Conventional Fire Panels (to BS5839-4)........................................................................................ 5
FP Automatic Extinguisher Panels .......................................................................................................................... 5
Fire Alarm Ancillaries (remote indicators, relays, device isolators and sounder circuit extenders) .................. 6
24V Power Supplies.................................................................................................................................................. 6
Electromagnetic Door Retainers ............................................................................................................................ 6
24V VRLA Battery Packs .......................................................................................................................................... 6
Manual Call Points .................................................................................................................................................. 6
E Range (Aurora) Conventional Smoke & Heat Detectors .................................................................................... 7
Series C60 (Apollo) Conventional Smoke & Heat Detectors ................................................................................ 7
Series C100 (System Sensor) Conventional Smoke & Heat Detectors .................................................................. 7
Series C120 (Nittan) Conventional Smoke & Heat Detectors ................................................................................ 7
Beam Detectors ........................................................................................................................................................ 7
Bells, Sirens, Sounders, Strobes & Beacons ............................................................................................................ 8
Vibrating pads .......................................................................................................................................................... 8
CFP AlarmSense 2-8 Zone Two-Wire Fire Panels (to EN54-2/4) & Ancillaries ...................................................... 9
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
AFP 1-2 Loop Analogue Addressable Fire Panels (to EN54-2/4) ........................................................................ 10
FireFinder 1-4 Loop Networkable Analogue Addressable Fire Panels (to EN54-2/4) ........................................ 10
XP95 Analogue Addressable Peripherals ..............................................................................................................11
Xplorer Analogue Addressable Peripherals ........................................................................................................ 12
Nittan Analogue Addressable Peripherals .......................................................................................................... 12
System Sensor Analogue Addressable Peripherals .............................................................................................. 12
VOICE ALARM SYSTEMS
AVAC Voice Alarm System .................................................................................................................................... 13
PA/VA Systems ........................................................................................................................................................ 13
FIRE TELEPHONE SYSTEMS
SigTEL Fire Telephone System .............................................................................................................................. 14
800 SERIES CONVENTIONAL CALL SYSTEM
Disabled Persons Toilet Alarms ............................................................................................................................ 15
800 Series Conventional Call System............................................................................................................15/16/17
800 Series Stainless Steel Call System .................................................................................................................. 18
C-Call Waiting Room Call System.......................................................................................................................... 18
ADDRESSABLE CALL SYSTEMS
Quantec Addressable Call System .................................................................................................................... 19/20
INDUCTION LOOP EQUIPMENT
PDA Range Induction Loop Equipment and Ancillaries ................................................................................ 21/22
INFRARED ASSISTIVE LISTENING SYSTEMS
Infrared assistive listening system..........................................................................................................................23
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 3
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
CFP 2-8 ZONE EN54 FIRE PANELS
CFP STANDARD 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
CFP702-4
NEW
NEW
CFP702-4U
CFP Standard 2 zone panel, unbranded code entry version, does not extend
£118.45
CFP702-4K
CFP Standard 2 zone panel, C-TEC branded keyswitch version, does not extend
£139.05
CFP702-4KU CFP Standard 2 zone panel, unbranded keyswitch version, does not extend
CFP704-4
NEW
• Fully compliant with EN54-2/4
plastic lid and enclosure
• Four conventional sounder circuits
CFP704-4U
CFP Standard 4 zone panel, unbranded code entry version, does not extend
CFP Standard 4 zone panel, C-TEC branded keyswitch version, does not extend
including zone test, non-latching
zones, programmable delays and
coincidence (dependent on model purchased)
• Access code and keyswitch variants
NEW
CFP708-4U
CFP Standard 8 zone panel, unbranded code entry version, does not extend
£226.60
CFP708-4K
CFP Standard 8 zone panel, C-TEC branded keyswitch version, does not extend
£247.20
• Please note: unbranded CFP standard
panels are now available
CFP Standard 8 zone panel, C-TEC branded code entry version, does not extend £226.60
CFP708-4KU CFP Standard 8 zone panel, unbranded keyswitch version, does not extend
£247.20
CFP 8 zone repeater panel, C-TEC branded code entry version, max 8 per system
£172.24
NEW
CFP760U
CFP 8 zone repeater panel, unbranded code entry version, max 8 per system
£172.24
CFP760K
CFP 8 zone repeater panel, C-TEC branded keyswitch version, max 8 per system
£180.88
NEW
CFP760KU
CFP 8 zone repeater panel, unbranded keyswitch version, max 8 per system
£180.88
CFP761
CFP network driver card, one required per repeater system, fit at main
£60.34
CFP762
CFP relay output card, provides reset, fault, aux & remote relay outputs
£40.99
CFP763
CFP relay output per zone card, as CFP762 plus 8 output per zone relays
£63.19
CFP754/Z
CFP 4 Zone Fire Alarm Starter Kit (Apollo version)
includes CFP704-4 panel, 2 x 1.2AHr batteries, C60 heat detector/base,
C60 smoke detector/base, manual call point, 2 x sounders
£291.26
CFP754/W
CFP 4 Zone Fire Alarm Starter Kit (System Sensor version)
includes CFP704-4 panel, 2 x 1.2AHr batteries, C100 heat detector/base,
C100 smoke detector/base, manual call point, 2 x sounders
£279.96
CFP754/N
CFP 4 Zone Fire Alarm Starter Kit (Nittan version)
includes CFP704-4 panel, 2 x 1.2AHr batteries, C120 heat detector/base,
C120 smoke detector/base, manual call point, 2 x sounders
£294.76
• Four CFP ranges are available:
CFP standard (4 wire) range
CFP economy (4 wire) range
CFP LPCB approved (4 wire) range
CFP AlarmSense (2 wire) range - see page 9
£169.95
CFP760
NEW
• Ancillary connections for up to eight
two-wire repeaters per system and
optional CFP relay boards
£169.95
CFP704-4KU CFP Standard 4 zone panel, unbranded keyswitch version, does not extend
aux. fire outputs
• Wide range of engineering functions
£149.35
NEW
• Class change and alert inputs
• Auxiliary fault, reset, remote and
£139.05
CFP Standard 4 zone panel, C-TEC branded code entry version, does not extend £149.35
CFP704-4K
CFP708-4
• Attractive flush or surface mountable
CFP Standard 2 zone panel, C-TEC branded code entry version, does not extend £118.45
CFP ECONOMY 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
Include all CFP standard features except coincidence, zone delay and non-latching zone facilities.
CFP Economy panels are not compatible with CFP repeaters or CFP relay boards.
CFP702E-4
CFP Economy 2 zone panel, code entry version, does not extend (unbranded)
£105.00
CFP702E-4K
CFP Economy 2 zone panel, keyswitch version, does not extend (unbranded)
£110.00
CFP704E-4
CFP Economy 4 zone panel, code entry version, does not extend (unbranded)
£130.00
CFP704E-4K
CFP Economy 4 zone panel, keyswitch version, does not extend (unbranded)
£135.00
CFP708E-4
CFP Economy 8 zone panel, code entry version, does not extend (unbranded)
£190.00
CFP708E-4K
CFP Economy 8 zone panel, keyswitch version, does not extend (unbranded)
£195.00
CFP LPCB APPROVED 2-8 ZONE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
Include all CFP standard features except coincidence and non-latching zone facilities.
CFP702-4/LPC
CFP LPCB approved 2 zone panel, code entry only
LPCB approved to EN54-2/4, does not extend
£154.06
CFP704-4/LPC
CFP LPCB approved 4 zone panel, code entry only
LPCB approved to EN54-2/4, does not extend
£194.23
CFP708-4/LPC
CFP LPCB approved 8 zone panel, code entry only
LPCB approved to EN54-2/4, does not extend
£294.65
CFP ALARMSENSE 2-8 ZONE TWO WIRE CONVENTIONAL FIRE PANELS (TO EN54-2/4)
Include all standard CFP features.
Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.
See our separate listing on page 9
page 4
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
FP/MFP 1-28 ZONE BS FIRE PANELS
EFP SINGLE ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)
EFP panels are not compatible with FP repeaters or FP relay modules.
FF380-2
EFP1 single zone panel, does not extend
FF380X
EFPX expansion loom and terminals for EFP1
BF378M
MINIMU miniature EOL module (for head out monitoring on EFP1)
BF378
Electronic Monitoring Unit (for head out monitoring on EFP1)
£85.43
£2.71
£8.44
£16.55
FP 2-14 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)
FF382-2
FP 2 zone panel, does not extend
£130.93
FF384-2
FP 4 zone panel, extends to 6 zones
£200.43
FF386-2
FP 6 zone panel, does not extend
£234.96
FF388-2
FP 8 zone panel, extends to 14 zones
£366.33
FF390-2
FP 10 zone panel, extends to 14 zones
£400.88
FF392-2
FP 12 zone panel, extends to 14 zones
£435.41
FF394-2
FP 14 zone panel, does not extend
£469.94
FF387Z-2
FP 2 zone extender pcb kit, use to extend FP panels
• Non-latching “class change” input
BF378M
MINIMU miniature EOL module (for head out monitoring on EFP/FP)
• Latching fire and non-latching fault
BF378
Electronic Monitoring Unit (for head out monitoring on EFP/FP)
£16.55
FF374FR
FP fault relay module
£33.07
FF374DFR
FP fire relay module
£33.07
FF374DT
FP sounder delay module
£33.07
FF374X
FPX expansion loom and terminals for use with FP 2-14 zone panels
FF396-2
FP 10 zone repeater panel
£125.06
FF398-2
FP 20 zone repeater panel
£187.62
FF379
Bezel for FP2
FF385
Bezel for FP4 / FP6 / FP Repeaters
£27.61
FF387
Bezel for FP8 / FP10 / FP12 / FP14
£33.12
• Fully compliant with BS5839-4
• Lift-off lid for easy first fix and
straightforward maintenance
• Robust metal enclosure with
heavy duty base connections
• Optional head removal facility
(fitted as standard to MFP panels)
outputs (via expansion loom)
• Short circuit = fire facility
(selectable on a zone by zone basis for
retro-installations)
• Ancillary connections for repeater
panels and other system add-ons
including expansion looms, fault
relays, sounder extender kits, etc
£34.54
£8.44
£10.99
£25.11
MFP 4-28 ZONE CONVENTIONAL FIRE PANELS (TO BS5839-4)
FF504
MFP 4 zone microprocessor panel, extends to 12 zones
£231.18
FF508
MFP 8 zone microprocessor panel, extends to 12 zones
£333.52
FF512
MFP 12 zone microprocessor panel, does not extend
£435.84
FF516
MFP 16 zone microprocessor panel, extends to 28 zones
£633.46
FF520
MFP 20 zone microprocessor panel, extends to 28 zones
£735.80
FF524
MFP 24 zone microprocessor panel, extends to 28 zones
£838.13
FF528
MFP 28 zone microprocessor panel, does not extend
£940.47
FF501Z
MFP 4 zone extender pcb kit, use to extend MFP panels
£102.32
FF574X
MFPX expansion loom and terminals
FF596
MFP 8 zone repeater panel, extends to 28 zones
FF596R
MFP 8 zone repeater extender kit, use to extend MFP repeaters
£41.55
FF596T
Repeater transmitter pcb kit, one required per repeater system
£166.46
FF385
Bezel for MFP4 / MFP8 / MFP12 / MFP Repeaters
£27.61
FF387
Bezel for MFP16 / MFP20 / MFP24 / MFP28
£33.12
£10.99
£185.19
FP AUTOMATIC EXTINGUISHER PANELS
FP AUTOMATIC EXTINGUISHER PANELS
FF383H
FP automatic extinguisher panel (contact our Sales Desk for a list of features)
FF385
Bezel for FP automatic extinguisher panel
£27.61
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£358.97
page 5
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
FIRE ALARM ANCILLARIES
REMOTE INDICATORS, RELAYS, DEVICE ISOLATORS AND SOUNDER CIRCUIT EXTENDERS
BF318
Remote LED indicator, supplied on a single gang plate
£5.68
Ideal for connecting to hidden or out of sight detectors or directly to a sounder circuit
BF376
24V 5A relay on a plate, supplied on a single gang plate
£17.18
Ideal for operating door retaining magnets, rollershutter doors & other ancillary devices.
BF367
Auxiliary device isolator, supplied on a single gang plate
£23.74
Allows a 24V d.c. output from a fire panel to be remotely isolated, ideal for preventing
autodiallers, rollershutter doors, etc., from accidentally triggering during routine maintenance
NEW
BF366
24V 5A isolatable relay on a plate, supplied on a single gang plate
£35.00
Combines the functions of the BF376 5A relay and BF367 device isolator in one unit.
FF502P
Four zone monitored sounder extender, supplied on a double gang plate
£41.55
Provides four extra sounder circuits with open and closed circuit fault monitoring,
two trigger inputs and one fault output
• A range of durable, reliable and
cost-effective fire alarm ancillaries,
suitable for use with virtually all makes
of fire alarm panel. The range includes:-
24V POWER SUPPLIES
BF375P
24V 250mA unregulated door release PSU, supplied on a double gang plate
£41.33
BF375PK
24V 250mA unregulated door release PSU kit
Includes one BF375P and one BF345/1H electromagnetic door retainer
£82.00
BF375M
24V 1A regulated general purpose boxed PSU
£77.96
BF377
24V 2A unregulated door release boxed PSU
BF368EN
24 3A regulated boxed PSU to EN54/4
• The BF318 remote LED indicator
• The BF376 24V 5A relay on a plate
• The BF367 auxiliary device isolator
£66.21
£175.00
• The BF366 isolatable 24V 5A relay on a plate
BF375PE
24V 250mA unregulated double gang door release psu c/w detector circuit
• The FF502P four zone sounder extender
BF375PEK
24V 250mA double gang automatic door release system
£186.15
Includes 1 x BF375PE double gang door release psu c/w detector circuit kit,
2 x Apollo C60 optical detectors /bases and 1 x electromagnetic door retainer
BF345/1H
24 V d.c. electromagnetic door retainer
£43.12
BF345/2H
240 V a.c. electromagnetic door retainer
£42.82
• Four 24V d.c. power supplies including a
250mA door release PSU, a 1A general
purpose PSU, a 2A door release PSU and
an EN54 compliant 3A switch mode PSU.
£46.35
FIRE ALARM ACCESSORIES
24V BATTERY PACKS
BC283/2
24V 1.2 AHr VRLA battery pack (2 x 12V including link wire)
BC284/2
24V 2.1 AHr VRLA battery pack (2 x 12V including link wire)
£25.72
£28.82
BC285/2
24V 2.8 AHr VRLA battery pack (2 x 12V including link wire)
£29.45
BC287/2
24V 3.3 AHr VRLA battery pack (2 x 12V including link wire)
£39.54
BC286/2
24V 7.0 AHr VRLA battery pack (2 x 12V including link wire)
£40.30
BC288/4
24V 10.0 AHr VRLA battery pack (4 x 6V including link wires)
£59.61
BC289/2
24V 24.0 AHr VRLA battery pack (2 x 12V including link wire)
£111.40
MANUAL CALL POINTS
BF370R
‘KAC’ surface mounting smash glass fire call point, 470Ω
BF370RF
‘KAC’ flush mounting smash glass fire call point, 470Ω
BF370/R
‘KAC’ IP55 Rainproof fire call point
£37.77
BF370/W
‘KAC’ IP67 Waterproof fire call point
£59.63
BF371
Spare glass for ‘KAC’ fire call points
£0.54
BF370KRK
Test key for ‘KAC’ fire call points
£0.55
BF370FR
FR1 surface mounting smash glass fire call point, 470Ω
£6.56
BF370FFR
FR1 flush mounting smash glass fire call point, 470Ω
£6.01
BF371F/CX
Spare glass for FR1 fire call point
£0.42
BF370FRK
Test key for FR1 fire call point
£0.55
BF370FC
Protective cover for FR1 fire call point
£3.05
BF370MR
‘No Break’ surface mounting fire call point, 470Ω
£8.21
BF370MFR
‘No Break’ flush mounting fire call point, 470Ω
£7.50
BF370MKRK Pack of 10 spare reset keys for ‘No Break’ fire call points
page 6
BF370MC
Protective cover for ‘No Break’ fire call point
BF372
KY1/SC/C yellow extinguishant release surface call point
£6.46
£6.01
£3.65
£3.01
£17.37
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
NEW
NEW
SERIES E (AURORA) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302EH
S300 E Range fixed temperature heat detector, no base
£13.00
BF303EH
S400 E Range rate of rise heat detector, no base
£13.00
BF316EH
S100 E Range optical smoke detector, no base
£22.00
BF308E
ASB100 E Range standard base
£5.00
BF308ED
ASB100R E Range standard base with diode
£5.70
SERIES C60 (APOLLO) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302Z1H
Series C60 grade 1 heat detector, no base
£13.50
BF302Z2H
Series C60 grade 2 heat detector, no base
£13.50
BF302Z3H
Series C60 grade 3 heat detector, no base
£13.50
BF302Z1HIS Series C60 grade 1 intrinsically safe heat detector, no base
£60.00
BF302Z2HIS Series C60 grade 2 intrinsically safe heat detector, no base
£60.00
BF303Z1H
Series C60 range 1 heat detector, no base
£13.50
BF303Z2H
Series C60 range 2 heat detector, no base
£13.50
BF315ZH
Series C60 combined optical and heat detector, no base
£56.75
BF316ZH
Series C60 optical smoke detector, no base
£28.00
BF317ZH
Series C60 ionisation smoke detector, no base
£28.00
BF317ZH1
Series C60 integrating ionisation smoke detector, no base
£30.00
BF317ZHIS
Series C60 intrinsically safe ionisation smoke detector, no base
£68.57
BF308Z
Series C60 base
BF308ZD
Series C60 base with diode
BF308ZIS
Series C60 intrinsically safe base
£10.00
BF308ZR
Series C60 base with relay
£27.00
£5.47
£6.42
SERIES C100 (SYSTEM SENSOR) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302WH
Series C100 fixed temperature thermal detector, no base
£16.00
BF303WH
Series C100 rate of rise thermal detector, no base
£16.00
BF316WH
Series C100 optical smoke detector, no base
£23.00
BF317WH
Series C100 ionisation smoke detector, no base
£22.00
BF308W
Series C100 24V detector base ONLY
BF308WD
Series C100 24V detector base with diode
£6.46
BF308WR
Series C100 24V detector base with resistor
£6.46
£4.80
BF308WRD
Series C100 24V detector base with diode and resistor
BF308WL
Series C100 12V latching relay base
£10.25
£7.48
BF308WNL
Series C100 12V non latching relay base
£10.25
BF309W
Series C100 test magnet
£3.00
SERIES C120 (NITTAN) CONVENTIONAL SMOKE & HEAT DETECTORS
BF302N1H
Series C120 grade 1 58oC heat detector, no base
£17.00
BF302N2H
Series C120 grade 2 66oC heat detector, no base
£17.00
BF302N3H
Series C120 grade 3 74 C heat detector, no base
£17.00
BF302NEH
Series C120 fixed temperature 70oC heat detector, no base
£17.00
BF303NEH
Series C120 rate of rise heat detector, no base
£17.00
BF316NH
Series C120 optical smoke detector, no base
£28.00
BF317NH
Series C120 ionisation smoke detector, no base
£28.00
BF308N
Series C120 24V standard base
BF308NSD
Series C120 24V standard base with diode
o
£5.47
£6.42
BF308N12VR Series C120 12V relay base
£20.25
BEAM DETECTORS
BF369BD
Fireray 2000 12-24V optical beam detector, 10-100m range
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£441.54
page 7
solidstatesecurity.co.uk
CONVENTIONAL FIRE ALARM EQUIPMENT
BELLS, SIRENS, SOUNDERS, STROBES & BEACONS
BF330CSR
24V red Vantage fire siren c/w shallow base
£17.40
BF330CDR
24V red Vantage fire siren c/w deep base
£17.40
BF330SR
24V red polarised fire siren, internal (shallow)
£17.91
BF330DR
24V red polarised fire siren, weatherproof (deep)
£19.46
£13.50
NEW
BF331CR
24V red Vara conventional bedhead sounder
NEW
BF331CW
24V white Vara conventional bedhead sounder
£13.50
BF331R
24V red polarised bedhead sounder
£13.61
BF331W
24V white polarised bedhead sounder
£13.61
BF332C
24V Vector conventional base sounder
£17.40
BF332
24V Squashni base ceiling sounder
£17.91
BF333CSR
24V red Vantage-Combi fire siren/beacon c/w shallow base
£41.34
BF333CDR
24V red Vantage-Combi fire siren/beacon c/w deep base
£41.34
BF333F
24V Flashni sounder/beacon combined
£41.33
BF336
24V polarised fire bell, internal
£13.72
BF336/W
24V polarised fire bell, weatherproof
£25.32
BF340/1
24V polarised red 1W fire strobe
£21.75
BF340/3
24V polarised red 3W fire strobe
£21.75
VIBRATING PADS
NEW
BF363
24V vibrating pad c/w locking jack plug (requires 1 x BF364)
£45.00
Designed for use under pillows, etc, to warn the hard of hearing of a fire condition
NEW
BF364
Single gang locking jack socket for use with BF363
£32.00
Can be connected to a standard 24V (max. 27V) fire alarm sounder circuit
page 8
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
TWO-WIRE FIRE ALARM EQUIPMENT
CFP/ALARMSENSE TWO-WIRE FIRE PANELS & ANCILLARIES
CFP ALARMSENSE 2-8 ZONE TWO-WIRE FIRE PANELS (TO EN54-2/4)
Include all standard CFP features (see page 4).
Zone circuits designed for use with AlarmSense call points, AlarmSense detectors & AlarmSense sounders only.
CFP702-2
CFP AlarmSense 2 zone two-wire panel, code entry only
includes 2 AlarmSense zone circuits, does not extend
£153.98
CFP704-2
CFP AlarmSense 4 zone two-wire panel, code entry only
includes 4 AlarmSense zone circuits, does not extend
£194.16
CFP708-2
CFP AlarmSense 8 zone two-wire panel, code entry only
includes 8 AlarmSense zone circuits, does not extend
£294.58
CFP760
CFP 8 zone repeater panel, up to 8 per system, code entry
£172.24
CFP761
CFP network driver card, one required per repeater system, fit at main
£60.34
CFP762
CFP relay output card, provides reset, fault, aux & remote relay outputs
£40.99
CFP763
CFP relay output per zone card, as CFP762 plus 8 output per zone relays
CFP754/2W
CFP 4 zone two-wire fire alarm starter kit (AlarmSense version)
£63.19
£431.42
Includes CFP704-2 panel, 2 x 1.2AHr batteries, AlarmSense call point, AlarmSense
heat detector/base, AlarmSense smoke detector/base, 2 x AlarmSense sounders
ALARMSENSE DETECTORS, CALL POINTS & SOUNDERS for use with CFP two-wire fire panels only
NEW
BF302ASH
AlarmSense standard heat detector
BF302ASHH
AlarmSense high temperature heat detector
£20.86
£22.41
BF316ASH
AlarmSense optical smoke detector
£32.51
BF316ASHI
AlarmSense integrating optical smoke detector
£31.38
BF308AS
AlarmSense base
£15.68
BF330ASBS
AlarmSense base sounder
£35.81
BF330ASR
AlarmSense sounder c/w red cap
£38.25
BF370ASS
AlarmSense surface mounting manual call point
£32.68
BF316ASHC
AlarmSense optical smoke detector / base / sounder combination
£65.51
BF316ASHIC
AlarmSense integrating optical smoke detector / base / sounder combination
£66.20
BF302ASHC
AlarmSense standard heat detector / base / sounder combination
£62.41
BF302ASHHC
AlarmSense high temperature heat detector / base / sounder combination
£63.79
BF318AS
AlarmSense remote indicator
£10.61
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 9
solidstatesecurity.co.uk
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
AFP 1-2 LOOP EN54 FIRE PANELS
AFP 1-2 LOOP ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
• Fully compliant with EN54 parts 2 & 4
• Compatible with Apollo XP95, Xplorer,
System Sensor or Nittan protocols
• 16 zonal alarm LEDs, expandable to 32
• Four separately programmable
conventional sounder circuits
• Alert, reset, ‘class change’ & silence inputs
• Auxiliary fire, fault, remote, pre-alarm,
AFP701E/X
AFP economy 1 loop panel, does not extend, (XP95/Xplorer) plastic lid
AFP701/X
AFP 1 loop panel, extends to 2 loop, (XP95/Xplorer) plastic lid
£526.50
AFP701/XM
AFP 1 loop panel, extends to 2 loop, (XP95/Xplorer) metal lid
£616.50
AFP702/X
AFP loop driver card (XP95/Xplorer)
£135.00
AFP701E/W
AFP economy 1 loop panel, does not extend (System Sensor) plastic lid
£378.00
AFP701/W
AFP 1 loop panel, extends to 2 loop, (System Sensor) plastic lid
£526.50
AFP701/WM AFP 1 loop panel, extends to 2 loop, (System Sensor) metal lid
£616.50
AFP702/W
AFP loop driver card (System Sensor)
£135.00
AFP701E/N
AFP economy 1 loop panel, does not extend (Nittan) plastic lid
£378.00
AFP701/N
AFP 1 loop panel, extends to 2 loop, (Nittan) plastic lid
£526.50
AFP701/NM AFP 1 loop panel, extends to 2 loop, (Nittan) metal lid
£616.50
AFP702/N
AFP loop driver card (Nittan)
£135.00
AFP703
AFP 16 zone extension LED kit (all protocols)
£180.00
AFP707
AFP upload/download software & lead (all protocols)
Compatible with Windows 95/98/2000
AFP710
AFP 16 zone fully functional repeater (all protocols), plastic lid
(not compatible with AFP economy panels)
AFP711
AFP network driver card, one per repeater system (all protocols)
fit at AFP master (not compatible with AFP economy panels)
AFP709
AFP printer kit including printer, lead and socket
AFP385
AFP flush mounting bezel, fits all AFP variants
reset and 24V outputs
• Programmable delay and phased
evacuation facilities
• Intuitive Windows 95/98/2000 PC uploaddownload programming software
• Up to 15 repeaters per system (not
available on AFP economy panels)
£378.00
£80.00
£490.00
£91.00
£342.15
£27.61
The warranty on our AFP range of products is invalid unless properly installed and commissioned
in line with BS5839 Pt 1 2002 by a suitably qualified and approved engineer or organisation.
FIREFINDER 1-4 LOOP NETWORKABLE FIRE PANELS
FIREFINDER 1-4 LOOP NETWORKABLE ANALOGUE ADDRESSABLE FIRE PANELS (TO EN54-2/4)
112-0018
SP2 1 loop networkable panel, extends to 2 loops (XP95)
112-0019
SP2 1 loop networkable panel c/w printer, extends to 2 loops (XP95)
£975.00
112-0020
SP2 1 loop networkable panel c/w network interface, extends to 2 loops (XP95) £1,145.00
112-0021
SP2 2 loop networkable panel, does not extend (XP95)
£1,025.00
112-0022
SP2 2 loop networkable panel c/w printer, does not extend (XP95)
£1,270.00
112-0023
SP2 2 loop networkable panel c/w network interface, does not extend (XP95) £1,195.00
£1,220.00
112-0065
SP2 1 loop networkable panel c/w printer and network interface (XP95)
£1,390.00
112-0066
SP2 2 loop networkable panel c/w printer and network interface (XP95)
£1,440.00
112-0024
SP4 1 loop networkable panel c/w zonal LEDs (XP95)
£1,520.00
112-0025
SP4 2 loop networkable panel c/w zonal LEDs (XP95)
£1,595.00
112-0026
SP4 3 loop networkable panel c/w zonal LEDs (XP95)
£1,772.00
112-0027
SP4 4 loop networkable panel c/w zonal LEDs (XP95)
£1,847.00
159-0010
16 Input board kit
£83.00
• Large backlit, graphic LCD display
159-0012
8 x 1A relay output kit
£83.00
• Programmable via front panel or PC
159-0013
8 x 5A relay output kit
• Up to 64 Network Nodes
159-0016
Panel printer
• Network panel access selectable by
326-0008
Paper for 159-0016 panel printer, supplied in boxes of 10 rolls
159-0053
Network interface
159-0069
4 plus 4 bell monitor board
£167.00
159-0071
8 way bell monitor board
£167.00
158-0014
SP2 flush mount bezel
158-0005
SP4 flush mount bezel
159-0073
SmartGraphics, Windows based graphics package (includes dongle)
322-0008
FireFinder laptop comms cable
159-0044
LCD repeater
• Designed to comply with EN54 parts 2 & 4
• Compatible with Apollo XP95, Xplorer,
Series 90 & Discovery protocols
• 1 to 32 loop capability
detector group, loop, panel, or global
• Ultrafast RS422 peer to peer communications
• Single point network programming
(anywhere on the network)
• Optional SmartGraphics based device
indication, system control and system logs
page 10
£83.00
£208.00
£33.00
£208.00
£74.00
£84.00
£2,667.00
£12.00
£520.00
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
APOLLO XP95 ANALOGUE ADDRESSABLE PERIPHERALS
NEW
BF302XPH
BF303XPH
BF314XPH
BF316XPH
BF317XPH
BF308XP
BF308XPC
BF308XPR
BF369XBD
BF308XP/20
AFP735
BF308XPI
AFP735DD
AFP730
AFP730I
AFP730D
AFP730MS
AFP732
AFP732I
AFP732D
AFP733
AFP733I
AFP733D
AFP734
AFP734I
AFP736
AFP736I
AFP736D
AFP737
AFP737I
AFP737D
AFP738
BF370XP
BF370XP/W
BF370XPG/5
BF330XRWL
BF330XR
55000-400
55000-401
55000-885
55000-600
55000-500
45681-210
38531-771
45681-242
55000-265
45681-321
55000-700
45681-211
55000-802
55000-818
55000-847
55000-803
55000-875
55000-823
55000-852
55000-826
55000-819
55000-849
55000-804
55000-813
55000-845
55000-810
55000-843
55000-810
55000-809
55000-841
55000-821
55000-832
55000-905
55000-950
39117-217
55000-259
45681-261
standard temperature heat detector, no base
high temperature heat detector, no base
multisensor, no base
optical smoke detector, no base
ionisation smoke detector, no base
standard base c/w XPERT card
blank XPERT Card
standard base with relay c/w XPERT card
loop powered beam detector
isolating base (isolates up to 20 devices)
isolator, needs BF308XPI base
isolator base (for use with AFP735)
dual isolator, DIN style
input output unit (includes back box)
input output unit, with isolator (includes back box)
input output unit, DIN style
input output unit, mains switching
sounder control unit (includes back box)
sounder control unit with isolator (includes back box)
sounder control unit, DIN style
output unit (includes back box)
output unit with isolator (includes back box)
output unit, DIN style
zone monitor (includes back box)
zone monitor with isolator (includes back box)
switch monitor (includes back box)
switch monitor with isolator (includes back box)
switch monitor, DIN style
switch monitor plus (includes back box)
switch monitor plus with isolator (includes back box)
switch monitor plus, DIN style
mini switch monitor with interrupt (no back box required)
manual addressable call point
waterproof IP67 manual addressable call point
spare glass for manual addressable call point, pack of 5
loop powered sounder c/w white lid for stand alone use
loop powered sounder for use with BF308XP or BF308XPI bases
£42.00
£42.00
£58.33
£43.00
£43.00
£5.00
£0.53
£27.00
£839.00
£32.00
£35.00
£6.50
£77.14
£72.87
£91.67
£87.14
£127.78
£105.33
£111.42
£114.29
£68.75
£84.72
£78.57
£74.66
£90.27
£66.25
£79.17
£80.56
£73.75
£90.69
£87.50
£50.51
£43.75
£156.70
£3.58
£61.11
£58.89
BF330XR/I
45681-262 loop powered sounder for use with BF308XP/20 isolating bases
£61.11
NEW FOR 2004: The AVAC XP95 compatible analogue addressable voice alarm system - see page 13
C-TEC MANUFACTURED XP95 COMPATIBLE ANALOGUE ADDRESSABLE LOOP POWERED SOUNDERS
NEW
NEW
Introducing our new range of C-TEC
manufactured XP95 and Xplorer
compatible loop powered
sounders and sounder/beacons!
NEW
NEW
BF330CASR
BF330CASW
BF330CADR
BF330CADW
BF333CASR
BF333CASW
BF333CADR
BF333CADW
BF330CR
BF330CRLIDW
BF330CRLIDR
24V red Vantage loop powered sounder c/w shallow base
24V white Vantage loop powered sounder c/w shallow base
24V red Vantage loop powered sounder c/w deep base
24V white Vantage loop powered sounder c/w deep base
24V red Vantage-Combi loop powered sounder/beacon c/w shallow base
24V white Vantage-Combi loop powered sounder/beacon c/w shallow base
24V red Vantage-Combi loop powered sounder/beacon c/w deep base
24V white Vantage-Combi loop powered sounder/beacon c/w deep base
24V white Vector loop powered base sounder
Optional white lid for BF330CR (required for stand alone use)
Optional red lid for BF330CR (required for stand alone use)
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£48.50
£48.50
£49.50
£49.50
£71.30
£71.30
£72.30
£72.30
£36.55
£4.13
£4.13
page 11
solidstatesecurity.co.uk
ANALOGUE ADDRESSABLE FIRE ALARM EQUIPMENT
APOLLO XPLORER ANALOGUE ADDRESSABLE PERIPHERALS
BF302XHB
BF302XHBL
BF303XHB
BF303XHBL
BF316XHB
BF316XHBL
AFP733X
AFP735X
AFP736X
BF370X
59000-405
59000-406
59000-415
59000-416
59000-605
59000-606
59000-810
59000-700
59000-820
59000-910
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
Xplorer
standard heat detector c/w base
standard heat detector c/w LED driver base
high temperature heat detector c/w base
high temperature heat detector c/w LED driver base
optical detector c/w standard base
optical detector c/w LED driver base
output unit (includes back box)
isolator unit (includes back box)
switch monitor unit (includes back box)
manual call point c/w back box
£
£
£
£
£
£
£
£
£
£
35.97
41.11
35.97
41.11
40.69
42.36
32.53
15.26
33.78
39.73
NITTAN ANALOGUE ADDRESSABLE PERIPHERALS
BF302NPH
ST-H-AS heat detector, no base
£39.90
BF316NPH
ST-P-AS optical smoke detector, no base
£43.00
BF317NPH
ST-I-AS ionisation smoke detector, no base
£43.00
BF308NP
STB-4 addressable base
AFP741
SCI-4 short circuit isolator (boxed)
£4.75
£44.00
BF308NP/20 SCI-3 short circuit isolator base, will accept heat, optical & ion detectors
£32.00
BF370NP
ST-NCP-AS manual call point, back box not included
£43.00
BF370NPBB
Back box for ST-NCP-AS
BF371
Spare glass for ST-NCP-AS, one only
AFP742
MCM-AS3 zone monitor module, c/w back box
£88.00
AFP743
NAM-AS2 input module, c/w back box
£53.20
AFP744
OCM-AS2 output module, c/w back box
£74.57
AFP745
SCM-AS3 sounder output module, c/w back box
£94.00
BF330NC
ST-WMS-AS wall mounted loop sounder, white c/w cap
£59.55
BF330NB
ST-BMS-AS base mounted loop sounder, white c/w STB-4 base
£60.60
BF330NBH
ST-VMS-AS bedhead loop sounder, fits standard single gang back boxes
£60.60
£1.50
£0.54
SYSTEM SENSOR ANALOGUE ADDRESSABLE PERIPHERALS
BF302WPH
5251HTEM 78o fixed temperature heat detector, no base
£44.00
BF303WPH
5251REM rate of rise heat detector, no base
£44.00
BF316WPH
2251EM optical smoke detector, no base
£42.50
BF317WPH
1251E ionisation smoke detector, no base
£43.00
BF308WP
B501 standard base
BF308WPR
B524RTE mounting base with relay
£5.00
£35.00
BF309W
MO2-24 test magnet
BF316WFH
FTX-P1 ‘Filtrex’ optical smoke detector, no base
£3.00
BF316WFF
RF-FTX spare filters for ‘Filtrex’ optical smoke detector, pack of 6
£80.00
BF308WF
B501B-FTX base for ‘Filtrex’ optical smoke detector
£45.00
£315.00
BF308WPI
B5241EFT isolating base (isolates up to 25 detectors)
£18.50
AFP726
M500XE isolator module, back box not included
£32.00
AFP720
M500ME monitoring module, back box not included
£51.50
AFP721
M503ME micro monitor unit
£38.00
AFP722
M500CHE control module, back box not included
£66.00
AFP724
M512ME conventional zone module, back box not included
£90.00
AFP725
SMB500 enclosure, surface mount
AFP727
M501ME mini monitor module
£42.00
BF370WP
M500KAC manual call point
£43.00
BF370WPBB
SR3T manual call point, back box
BF370WPW
M500KACW weatherproof call point, back box included
£6.20
£4.50
BF370WPG/10
E-G/10 glass for BF370WP, pack of 10
BF370WPTT
ETT-P terminal tray for flush call point
£7.97
BF330WR
EMA24ALR loop powered sounder, red, base not included
£55.00
BF330WW
EMA24ALW loop powered sounder, white, base not included
£55.00
£5.25
BF330WBASED ESBR deep base for loop powered sounder, red
page 12
£177.98
£2.51
BF330WBASEW DBS24ALW low profile loop powered sounder, white
£58.00
BF330WBASEWL DBS24ALWLW low profile loop powered sounder, lid included
£58.50
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
VOICE ALARM SYSTEMS
AVAC VOICE ALARM SYSTEM
AVAC MODULES, AMPLIFIERS & ANCILLARIES
VA403
Master AVAC dual 60W amplifier, charger & PSU
£1,100.75
includes fire alarm interface, fire microphone, paging and BGM connections
VA403H
Master AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp. £1,275.00
VA402
Slave AVAC dual 60W amplifier, charger & PSU
includes fire alarm interface, fire microphone, paging and BGM connections
£795.00
includes local paging and BGM connections
VA402H
Slave AVAC dual 60W amplifier, charger & PSU c/w ‘hotswap’ standby amp.
£930.00
includes local paging and BGM connections
A new low-cost, high quality modular
voice alarm system purposely designed to
simplify the provision of a fully BS5839-8
compliant voice alarm system. In one
compact wall-mounting enclosure, the
AVAC comprises:-
VA405
FM1 Fireman's microphone (max. 1 per system)
£450.00
VA406
Line level paging microphone (max. 1 per system)
£250.00
LOUDSPEAKERS (TO BS 5839-8)
VA420
5” 6W ceiling speaker c/w steel fire dome & ceramic terminal block
£29.40
VA421
6.5” 6W ceiling speaker c/w steel fire dome & ceramic terminal block
£39.95
VA422
6W wall mounting speaker in metal cabinet c/w ceramic terminal block
£45.95
• Conventional and analogue (Apollo
VA423
8W wall mounting bi-directional metal speaker c/w ceramic terminal block
£59.95
XP95/Discovery) fire alarm interfaces
VA429
8” 10W ceiling speaker c/w steel fire dome & ceramic terminal block
£49.95
• A high-quality digital message store
VA430
6W round wall/ceiling speaker in metal cabinet c/w ceramic terminal block
£29.95
containing programmable Evacuate,
Alert and Test messages
Speakers for special applications - column, horn, sound projection, spherical suspension, etc are available to special order. Please contact our technical department for details.
• A prioritised mixer.
• Two x 60-Watt rms Class D amplifiers
(plus an optional standby amplifier)
• An EN54-4 compliant switch mode
AVAC TESTING EQUIPMENT
LOADMASTER
Louspeaker line tester
PNGN
Pink noise generator
£137.85
£61.90
power supply and battery charger
• Three balanced line level inputs for the
(optional) connection of a fire mic,
paging/public address equipment and a
background music source
• Space for 2 x 7Ahr VRLA batteries
typically providing at least 24 hours
standby and 30 mins alarm running time
• A slave line level output allowing the
connection of up to 10 slave AVAC
amplifiers.
TOTAL CAPABILITY PA/VA SYSTEMS
From a shop unit with a 100W single alarm zone system to an international airport with 250 alarm zones and many thousands of speakers, C-TEC
have the equipment and experience to provide a fully compliant and cost-effective VA/PA solution.
Our equipment (ask for our separate voice alarm pack for details) is installed all over the world in theatres, multi-screen cinemas, international
airports, shopping centres, high rise buildings, offices, hotels, leisure centres, football stadia, exhibition centres, railway stations and theme parks.
We are fully conversant with the relevant standards, in particular BS5839-8, BS EN 60849, BS7827 and EN54.
Please contact our sales desk should you require any further information.
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 13
solidstatesecurity.co.uk
FIRE TELEPHONE SYSTEM
SIGTEL FIRE TELEPHONE SYSTEM
SIGTEL FIRE TELEPHONE SYSTEM
• A hard-wired emergency telephone
system designed to help firefighters and
emergency personnel communicate fast
and effectively in large and complex sites
• Required in all phased evacuation sites
and sports stadia
• Meets and exceeds the requirements
of BS5839-9 (Emergency Voice
Communication Systems)
• Modular control system can be easily
distributed to save wiring costs
BTHS1-E
Red telephone handset with key (LED on base of handset)
£211.82
BTHS1-EH
Red telephone handset with handle (LED on base of handset)
£211.82
BT-BEZ
Red flush bezel for BTHS1-E or BTHS1-EH
BTHS
Red desk mount telephone handset
£116.62
BCCU-16
16 line master control unit c/w fault display, needs BLC2 line cards & batteries
£952.00
BSCU-16
16 line slave control unit c/w fault display, needs BLC2 line cards & batteries
£595.00
AFP385
Grey flush bezel for BCCU-16 or BSCU-16
£27.61
BLC2
Line Card, 2 Way (2 lines per card - up to 8 cards per BCCU-16/BSCU-16)
£59.50
£14.28
BC286/2
24V 7AHr VRLA battery pack
BSVMM
Message card for BCCU (optional)
£40.30
BSVMM/C
Custom message card for BCCU (optional)
BECU-32
Desk control unit c/w handset & display, 32 line
£1,428.00
BECU-64
Desk control unit c/w handset & display, 64 line
£2,142.00
BECU-128
Desk control unit c/w handset & display, 128 line
£2,856.00
BECUWMB
Wall mount bracket for BECU
BFITT
Fire telephone tester
£238.00
£599.00
£14.50
£120.00
BCatCON
Adaptor box (for conversion of FP200 to CAT5)
£22.19
BXSB
Xenon strobe, blue, 12V
£30.00
BSDM
Xenon strobe driver module, 12V
£15.00
• Small footprint dial unit and compact
wall-mounting exchanges save valuable
space in crowded control rooms.
• Fully monitored hardware & software
• Optional BFITT line tester allows cable
faults to be checked and cleared
prior to equipment connection
• Suitable for use in many other
emergency voice communication
applications, including disabled refuge
systems & stadium marshalling systems
page 14
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
DISABLED PERSONS TOILET ALARMS
800 SERIES DISABLED PERSONS TOILET ALARMS / SINGLE ZONE CALL SYSTEMS
NC951
Standard disabled persons toilet alarm kit (plastic version)
£102.50
Includes NC941 call controller, NC807C ceiling pull, NC806CS overdoor light &
sounder, NC809DBB button reset point (braille) & NC949 Disabled WC sticker
NC951/SS
Standard disabled persons toilet alarm kit (stainless steel version)
£154.00
Includes NC941/SS call controller, NC807C plastic ceiling pull, NC806CS/SS overdoor
light & sounder, NC809DB/SS button reset point & NC949 Disabled WC sticker
NC950
Economy single zone call system (plastic version)
£75.00
Includes NC941 call controller, NC807C ceiling pull & NC949 Disabled WC sticker
NC950/SS
Economy single zone call system (stainless steel version)
£130.00
Includes NC941/SS call controller, NC807C plastic ceiling pull & NC949 Disabled WC sticker
• Standard kits include everything required
for a compliant and reliable disabled
persons toilet alarm (except cables & fixings)
• Optional 0.3AHr battery back-up kit
typically provides 24 hours stand-by
NC941B
0.3AHr battery backup kit
NC949
Spare disabled WC sticker (1 off)
£48.50
£1.00
All of the parts contained in the kits listed above can also be purchased separately if desired.
In addition, systems can be expanded to include multi-zone indicator panels and/or additional
calling devices, sounders, etc. Refer to our full 800 Series Call System listing below for details
800 SERIES CALL SYSTEM
800 SERIES SINGLE ZONE EMERGENCY INDICATOR PANELS
Capable of indicating standard and emergency calls
NEW
NC941
Single zone call controller c/w 12V 250mA PSU & reset button
NC941/SS
Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button
NC941B
0.3AHr battery backup kit,
for use with NC941 and NC941/SS single zone call controllers
NC941R
Single zone call controller c/w 12V PSU, rechargeable battery & reset button
Coming soon - please contact our sales desk for availability details.
£70.00
£126.00
£48.50
£80.00
• Tried, trusted and respected
• Ideal for use in all types of private,
commercial, residential and public sector
buildings
• Hundreds of applications - suitable for
use in hotels, leisure centres, nursing
homes, shops, offices, GP surgeries, etc
• 12V d.c. system - simple to install, easy to
use and highly reliable - standard six core
security cable ideal for most installations
• Wide range of indicator panels covering
1 to 90 zones
800 SERIES 4-12 ZONE EMERGENCY INDICATOR PANELS
Capable of indicating standard and emergency calls
NC944
Four zone call controller c/w mute/reset button, requires 12V PSU
NC944/SS
Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU
£55.00
£151.33
NC930
12V 250mA PSU, powers up to 2 x four zone call controllers
NC930/SS
12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers
£50.00
NC941B
0.3AHr battery backup kit, for use with NC930 and NC930/SS 12V PSUs
£48.50
NC925B1
12V 1A white boxed PSU, powers up to 3 x four zone call controllers
£55.24
AC284
2.1AHr backup battery, for use with NC925B1 12V PSU
£124.40
£9.57
• Extensive range of ancillaries including
ceiling pulls, wall-mounting call points,
monitoring points, water resistant alert
points, overdoor lights, remote sounders
and relays
800 SERIES 10-60 ZONE EMERGENCY INDICATOR PANELS
Capable of indicating standard and emergency calls
£198.72
NC812KE
10 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
• Attractive compact design
NC811KE
10 Zone Emergency repeater panel
£149.01
• Two levels of call - standard (constant tone)
NC822KE
20 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£270.50
NC821KE
20 Zone Emergency repeater panel
£220.78
NC832KE
30 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£342.26
NC831KE
30 Zone Emergency repeater panel
£292.54
NC842KE
40 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£414.04
NC841KE
40 Zone Emergency repeater panel
£364.32
• Stainless steel versions of many
NC852KE
50 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£485.82
components now available
NC851KE
50 Zone Emergency repeater panel
£436.10
NC862KE
60 Zone Emergency master panel c/w 12V PSU, backup battery & mute button
£557.57
NC861KE
60 Zone Emergency repeater panel
£507.88
and emergency (intermittent tone)
(dependent on items purchased)
• No limit to system size - components
can be mixed to meet the layout and
call communication requirements of
virtually any building
Larger Emergency master and repeater panels available to order, add per 10 zones
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£71.76
page 15
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
800 SERIES 10-60 ZONE STANDARD INDICATOR PANELS
Capable of indicating standard calls ONLY
NC810K
10 Zone Standard master panel c/w 12V PSU & reset button
£160.31
NC811K
10 Zone Standard repeater panel
£135.46
NC820K
20 Zone Standard master panel c/w 12V PSU & reset button
£225.56
NC821K
20 Zone Standard repeater panel
£200.71
NC830K
30 Zone Standard master panel c/w 12V PSU & reset button
£290.82
NC831K
30 Zone Standard repeater panel
£265.95
NC840K
40 Zone Standard master panel c/w 12V PSU & reset button
£356.07
NC841K
40 Zone Standard repeater panel
£331.21
NC850K
50 Zone Standard master panel c/w 12V PSU & reset button
£421.30
NC851K
50 Zone Standard repeater panel
£396.46
NC860K
60 Zone Standard master panel c/w 12V PSU & reset button
£486.55
NC861K
60 Zone Standard repeater panel
£461.70
Larger Standard master and repeater panels available to order, add per 10 zones
£65.25
800 SERIES OVERDOOR LIGHTS AND SOUNDERS
Can be used to increase call indication levels
NC806C
Overdoor light
NC806CS
Overdoor light & sounder
£15.52
£24.39
NC806C/SS
Overdoor light, s/steel
£43.23
NC806CS/SS Overdoor light & sounder, s/steel
£49.30
NC887D
Switchable sounder
£19.93
NC888D
Remote sounder
£8.86
800 SERIES STANDARD CALL POINTS
Generate standard calls only
NC807C
Ceiling pull unit, no on-board reset, no remote socket
£15.52
NC802DB
Standard call point, button reset, with remote socket
£19.93
NC802DM
Standard call point, magnetic reset, with remote socket
£19.93
NC917L
Standard call push with protruding button, no on-board reset, no remote socket
£15.22
NC802DEWM
Master water resistant alert point, magnetic reset, no remote socket
£83.11
NC802DEWS
Slave water resistant alert point, up to 10 per master
£69.30
NC802DEM/SS
Stainless steel call point, magnetic reset, no remote socket
£95.80
800 SERIES STANDARD MONITORING POINTS
Generate standard calls only
NC894DKB
Isolatable monitoring point, button reset, no remote socket
£28.52
NC894DKM
Isolatable monitoring point, magnetic reset, no remote socket
£28.52
800 SERIES EMERGENCY CALL POINTS
Generate standard and/or emergency calls (as shown)
page 16
NC802DEB-1/2
Emergency call point, button reset, with remote socket
can generate standard and emergency calls
£29.09
NC802DEM
Emergency call point, magnetic reset, with remote socket
can generate standard and emergency calls
£29.09
NC802DEWM Master water resistant alert point, magnetic reset, no remote socket
can generate standard or emergency calls (not both)
£83.11
NC802DEWS
Slave water resistant alert point, max. 10 per master
£69.30
NC802DEM/SS
Stainless steel call point, magnetic reset, no remote socket
can generate standard or emergency calls (not both)
£95.80
NC804DE
Emergency call / reset point, button reset, no remote socket
can generate emergency calls only
£26.57
NC809DEM
Emergency call / reset point, magnetic reset, no remote socket
can generate emergency calls only
£26.57
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
800 SERIES INFRARED CALL POINTS & CEILING RECEIVERS
Generate standard and/or emergency calls when triggered by a compatible infrared transmitter
NC302RXC
NC302RXCS
NC802DERB
NC802DERM
NC302RT
Infrared master ceiling receiver, no on-board reset, no remote socket
Infrared slave ceiling receiver, up to 3 per master
Infrared call point, button reset, with remote socket
Infrared call point, magnetic reset, with remote socket
Test infrared receiver
£37.00
£25.00
£40.80
£40.80
£50.00
800 SERIES INFRARED TRANSMITTERS
For use with infrared call points & ceiling receivers
NC312RXA
NC312RXCA
NC312RXC
NC312BM
Infrared transmitter, push/pull for emergency call
Infrared transmitter, push for standard call / pull for emergency
Infrared transmitter, push for standard call only
Battery module for 800 Series infrared transmitter
£80.00
£80.00
£80.00
£6.00
800 SERIES RESET POINTS
Can be used to reset devices which do not have an onboard reset facility
NC809DB
NC809DB/SS
NC809DM
NC899IRR
Button reset point
Button reset point, s/steel
Magnetic reset point
Keyswitch reset point
£8.86
£43.60
£8.86
£22.50
800 SERIES MAGNETIC RESET KEYS
For use with all magnetic call points, monitoring points and reset points
NC803M/10
NC803M/50
10 x magnetic reset keys
50 x magnetic reset keys
£28.50
£135.00
800 SERIES ANCILLARY CALLING DEVICES
Generate standard calls via a call point’s remote socket
NC805C/6
NC805C/14
NC805D
NC805P
NC805AS
NC805MD
NC805DSP
1.8m (6ft) tail call lead
4.2m (14ft) tail call lead
1.2-3.6m (4-12ft) tail call lead
Hand/foot pneumatic pad, requires 1 x NC805AS
Remote air switch for NC805P
Portable movement detector
Double remote jack socket, allows two ancillary calling devices to be connected
£10.14
£11.40
£15.52
£14.80
£35.36
£304.34
£7.90
MISCELLANEOUS 800 SERIES DEVICES
NC899KD
NC884DE
NC885
NC889
NC889ERM
Area isolator, can be used to isolate areas/zones
Emergency 5:1 input expander, can be used to provide area/zonal indication
Standard 5:1 input expander, can be used to provide area/zonal indication
Call latch module, can trigger a standard call from a n/o or n/c switch
Multi-purpose call latch module, can trigger a standard and/or an emergency
£29.09
£16.74
£10.22
£10.22
£16.12
call from a n/o or n/c switch (includes confidence LED and on-board magnetic reset)
NEW
NC883D
NC848/50
NC947
12V relay unit, can be used to switch sirens, strobes, etc.
50 x anti-tamper screws, can be used to secure s/steel devices in high risk environments
Anti-tamper Allen key, for use with anti-tamper screws
£31.04
£80.00
£6.70
800 SERIES DATALOGGING AND PAGING EQUIPMENT
DP800KPD
DP800KD
DP830K
DP874DA
Datalogger c/w software & printer
Datalogger c/w software, no printer
30 zone interface kit, one required per 30 zones on DP800KPD or DP800KD
Transmitter for alphanumeric pagers
£883.10
£525.00
£38.68
£820.00
DP877A
DP874B/4
DP875/4
Alphanumeric pager (group 1), for other pager groups add B,C,D,E,F,G or H to the code £290.00
Tone only UHF paging transmitter, supplied with one tone-only pager
£485.43
Extra tone-only pager
£195.00
Must be used in conjunction with a DP800KPD or DP800KD datalogger
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 17
solidstatesecurity.co.uk
CONVENTIONAL CALL SYSTEMS
800 SERIES STAINLESS STEEL DEVICES
800 SERIES STAINLESS STEEL DEVICES
• New stainless steel versions of some of
our most popular 800 Series devices
• High quality brushed stainless steel
finish - ideal for use in hospitals, clinics
and many other prestigious private or
public sector applications
NC941/SS
Single zone call controller, s/steel, c/w 12V 250mA PSU & reset button
£126.00
NC944/SS
Four zone call controller, s/steel, c/w mute/reset button, requires 12V PSU
£151.33
NC930/SS
12V 250mA PSU, s/steel, powers up to 2 x four zone call controllers
£124.40
NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket
£95.80
NC802DES/SS Stainless steel slave call point
£89.00
NC809DB/SS Stainless steel button reset point
£43.60
NC806C/SS
£43.23
NC806CS/SS Overdoor light & sounder, s/steel
£49.30
NC848/10
10 x anti-tamper screws
£16.00
NC848/50
50 x anti-tamper screws
£80.00
NC947
Anti-tamper Allen key, for use with anti-tamper screws
NC951/SS
Standard disabled persons toilet alarm kit (stainless steel version)
£6.70
£154.00
Includes NC941/SS call controller, NC807C plastic ceiling pull, NC806CS/SS overdoor
light & sounder, NC809DB/SS button reset point & NC949 disabled WC sticker
• Optional anti-tamper screws available
for use in high-risk environments
• Compatible with our full range of 800
Overdoor light, s/steel
NC950/SS
Economy single zone call system (stainless steel version)
£130.00
Includes NC941/SS call controller and NC807C plastic ceiling pull
Series Call System devices
C-CALL WAITING ROOM CALL SYSTEM
C-CALL SELF-RESETTING DISPLAY PANELS
• Attractive slimline indicator panels with
NC905KT
2 zone self-resetting display panel incl. labels (state names when ordering)
£93.21
NC906KT
4 zone self-resetting display panel incl. labels (state names when ordering)
£186.42
NC907KT
6 zone self-resetting display panel incl. labels (state names when ordering)
£279.63
NC925C
Double insulated PSU, one required per system
NC903
2 x spare display panel labels (state names when ordering)
£24.85
£3.68
C-CALL RECEPTION PANELS
personalised self-adhesive labels
NC911K
10 zone reception panel
£135.46
• Available in self-resetting or manual
NC921K
20 zone reception panel
£200.71
reception reset formats
• Durable desk and wall mounting call
pushes with call confirmation LEDs
• Simple to install - four core security
cable is ideal for most installations
C-CALL MANUAL RECEPTION RESET PANELS
NC912K-5
5 zone resettable reception panel c/w psu
£160.31
NC912K-10
10 zone resettable reception panel c/w psu
£225.56
NC912K-15
15 zone resettable reception panel c/w psu
£290.82
• Easily expandable with no limit to
system size
C-CALL CALL PUSHES, OVERDOOR LIGHTS & REMOTE SOUNDERS
• Optional overdoor lights and remote
sounders available for increased call
indication levels
• Low voltage, low current systems with
optional back-up battery
• Logical operation
page 18
NC917L
C-Call call push (latching or non-latching)
£15.22
NC915L
C-Call desk push/4ft lead (latching or non-latching), requires NC920
£19.54
NC920
C-Call wall socket, for use with NC915L desk push
NC806C
Overdoor light
NC888D
Remote sounder
£4.97
£15.52
£8.86
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
ADDRESSABLE CALL SYSTEMS
QUANTEC ADDRESSABLE CALL SYSTEM
QUANTEC NETWORK CONTROLLERS, DISPLAYS, INSTALLATION AIDS
QT601-2
Quantec controller
AFP385
Flush bezel for Quantec controller
£325.00
£27.61
QT707
Quantec upload/download PC programming software c/w lead
£80.00
Compatible with Windows 95/98/2000/XP
QT608C
Quantec corridor display, with controls
£149.00
QT608CD
Quantec corridor display, no controls
£149.00
QT603
Quantec network splitter
£20.45
QUANTEC OVERDOOR LIGHTS & SOUNDERS
• Multiple call levels - standard call,
help required (assist), emergency
and optional infrared staff attack
QT606
Quantec overdoor light
QT606A
Quantec addressable overdoor light
£18.45
£42.00
QT688
Quantec addressable sounder
£41.00
• Up to 256 network devices per system
QUANTEC QT602 RANGE CALL POINTS (WITH REMOTE SOCKETS)
• New-look Quantec Controller is now
QT602
Quantec call point, button reset
£36.50
QT602S
Quantec call point, button reset with sounder
£41.50
QT602R
Quantec call point, button reset with infrared receiver
£59.50
QT602RS
Quantec call point, button reset with sounder & infrared receiver
£64.50
QT602M
Quantec call point, magnetic reset
£36.50
QT602SM
Quantec call point, magnetic reset with sounder
£41.50
QT602RM
Quantec call point, magnetic reset with infrared receiver
£59.50
QT602RSM
Quantec call point, magnetic reset with sounder & infrared receiver
£64.50
QT602D
Slave call point
£22.00
programmable via a sophisticated
upload/download PC program or by its
front panel controls
• Up to 45 custom place names per system
• Flexible call routing - allows the system to
be tailored to suit a building’s exact
operational needs
• Full monitoring of all network devices
• Free built-in 500 event datalogger
• Wide range of system components
including call points, ceiling pulls,
monitoring points, infrared ceiling
receivers, displays, remote sounders,
overdoor lights and pagers
• Staff presence, call accept, manual
and automatic call divert facilities
• Coming soon : a new range of
stainless steel Quantec devices (some
of which are pictured below) and a
new-look infrared transmitter
QUANTEC QT609 RANGE CALL POINTS (NO REMOTE SOCKETS)
QT609
Quantec call point, button reset
£36.00
QT609S
Quantec call point, button reset with sounder
£41.00
QT609R
Quantec call point, button reset with infrared receiver
£59.00
QT609RS
Quantec call point, button reset with sounder & infrared receiver
£64.00
QT609M
Quantec call point, magnetic reset
£36.00
QT609SM
Quantec call point, magnetic reset with sounder
£41.00
QT609RM
Quantec call point, magnetic reset with infrared receiver
£59.00
QT609RSM
Quantec call point, magnetic reset with sounder & infrared receiver
£64.00
QUANTEC CEILING PULLS
QT607
Quantec ceiling pull unit
£16.00
QUANTEC MONITORING POINTS
QT604
Quantec monitoring point, button reset
£36.90
QT604M
Quantec monitoring point, magnetic reset
£36.90
QUANTEC MAGNETIC RESET KEYS
NC803M/10
Pack of 10 magnetic reset keys
£28.50
NC803M/50
Pack of 50 magnetic reset keys
£135.00
QUANTEC INFRARED CEILING RECEIVERS
QT302RX
Quantec master infrared ceiling receiver
£99.00
QT302RXS
Quantec slave infrared ceiling receiver
£80.00
QT302RT
Quantec test infrared ceiling receiver
£50.00
QUANTEC RADIO RECEIVERS
QT322RX
Quantec radio receiver (compatible with QT332RXA transmitters only)
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£150.00
page 19
solidstatesecurity.co.uk
ADDRESSABLE CALL SYSTEMS
QUANTEC TRANSMITTERS
QT312RXA
Infrared transmitter (push for attack/pull for attack)
£80.00
QT312RXAP Infrared transmitter (pull for attack only/no pull)
£80.00
QT312RXCA Infrared transmitter (push for call/pull for attack)
£80.00
QT312RXC
Infrared transmitter (push for call only/no pull)
£80.00
QT332RXA
Dual action radio/infrared transmitter (push for attack/pull for attack)
£90.00
QT312BM
Battery module for infrared transmitters
£6.00
QUANTEC ANCILLARY CALLING DEVICES
Generate standard calls via a call point’s remote socket
NC805C/6
1.8m (6ft) tail call lead
£10.14
NC805C/14
4.2m (14ft) tail call lead
£11.40
NC805D
1.2-3.6m (4-12ft) tail call lead
£15.52
NC805P
Hand/foot pneumatic pad, requires 1 x NC805AS
£14.80
NC805AS
Remote air switch for NC805P
£35.36
NC805MD
Portable movement detector
£304.34
NC805DSP
Double remote jack socket, allows two ancillary calling devices to be connected
£7.90
QUANTEC PRINTERS
QT600P
Quantec printer kit incl. printer, lead & wall socket
QT600S
Quantec printer/paging wall socket
£342.15
£17.22
QUANTEC PAGING EQUIPMENT
page 20
DP874QA
Transmitter for alphanumeric pagers, 400m range
incl. transmitter, lead and wall socket
£841.71
DP876D
Display pager aerial, up to 1500m range
£95.00
DP876B
Mounting bracket for DP876D
£25.00
DP876F
15 metre low loss cable for DP876D
DP877QA
32 character alphanumeric display pager, group A
£70.00
£290.00
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
INDUCTION LOOP EQUIPMENT
PDA RANGE INDUCTION LOOP EQUIPMENT
NEW
PORTABLE INDUCTION LOOP KITS (approx. 1.2m2 coverage)
PL1/K1
Portable induction loop kit (supplied in a cardboard storage/carry case)
£149.95
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.
PL1/K2
Portable induction loop kit with AFILS tester (supplied in a cardboard storage/carry case)
£237.47
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker,
AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.
PL1/K3
Portable induction loop kit (supplied in a robust plastic storage/carry case)
£198.17
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger and sticker.
PL1/K4
Portable induction loop kit with AFILS tester (supplied in a robust plastic storage/carry case)
£290.35
Includes PL1 amplifier c/w battery & integral microphone, plugtop charger, sticker,
AHHM/H combined FoSmeter H magnetic field strength meter/loop listener and headphones.
PL1/BATT
TEAR-P
Replacement battery for PL1 amplifier
Spare ‘AFILS available’ sticker
£12.35
£1.00
1.5m2 COUNTER INDUCTION LOOP AMPLIFIER KITS
ML1/K
ML1 counter induction loop kit
£60.61
c/w ML1 wall-mounting double gang loop amplifier, AMT mic. and TX2 counter loop
NEW
PDA102C
PDA102 counter induction loop kit
£140.73
c/w PDA102 free-standing loop amplifier, AMT microphone and TX121 counter loop
20m2 MINI INDUCTION LOOP AMPLIFIER
ML1
• The widest range of audio-frequency
induction loop equipment in the UK
• Allows hearing aid users to participate
fully in general conversation and
other social/work related activities
• No audio experience required C-TEC’s loop systems can be fitted by
any competent electrician
• Extensive range of induction loop
testing equipment now available
including pink noise generators,
magnetic field strength meters and
loop listening devices
• Can be used to help building managers
and service providers comply with
BS8300, the Disability Discrimination
Act, the Care Standards Act and the
English Tourism Council’s National
Accessibility Scheme
£53.00
50m2 INDUCTION LOOP AMPLIFIERS & KITS
• Fully compliant with AFILS standards
BS-EN60118-4 (formerly BS6083) and
BS7594
• Available in a variety of cost-effective
kit formats suitable for use in ticket
offices, meeting rooms, lecture
theatres, nursing homes, GP surgeries,
churches and shops
Mini 20m2 wall-mounting double gang induction loop amplifier
DL50
DL50/K
50m2 Domestic induction loop amplifier
DL50 50m2 Domestic induction loop amplifier kit
£85.00
£98.00
PDA102L
PDA102 50m2 Small room loop kit (tie/desk mic version)
c/w DL50 free-standing loop amplifier, AMT tie/desk mic., APS scart lead & loop cable
NEW
£120.10
c/w PDA102 free-standing loop amplifier, AMT tie/desk microphone and loop cable
NEW
PDA102R
NEW
PDA102S
PDA102 50m2 Small room loop kit (omni-directional plated mic. version) £135.10
c/w PDA102 free-standing loop amplifier, APM plated microphone and loop cable
PDA102 50m2 TV lounge loop kit
£120.10
c/w PDA102 free-standing loop amplifier, Scart lead and APL connection plate and loop cable
120m2 INDUCTION LOOP AMPLIFIERS & KITS
PDA200E
AKM1
PDA200E 120m2 wall-mounting induction loop amplifier
PDA200E 120m2 Meeting/seminar room loop kit
£177.00
£213.45
c/w PDA200E amplifier, APM omni-directional mic plate
AKL1
PDA200E 120m2 Lecture room loop kit
£278.38
c/w PDA200E amplifier, AMT tie/desk mic, AML lectern mic, 2 x APJ plate
AKT1
PDA200E 120m2 TV / music lounge loop kit
£267.47
c/w PDA200E amplifier, AMH handheld mic, APS scart lead, APJ plate, APL plate
AKR1
PDA200E 120m2 Waiting room loop kit
£213.45
c/w PDA200E amplifier, APL plate
AKU1
PDA200E 120m2 Retail unit loop kit
£238.45
c/w PDA200E amplifier, AML lectern mic, APJ plate
AKW1
PDA200E 120m2 Place of worship loop kit 1
£274.90
c/w PDA200E amplifier, AML lectern mic, APJ plate, APL plate
AKW2/L
PDA200E 120m2 Place of worship loop kit 2 (lavalier mic. version)
£500.60
c/w PDA200E amplifier, AMR/L lavalier radio mic, APQM plate/, 2 x APXM plate
AKW2/H
PDA200E 120m2 Place of worship loop kit 2 (handheld mic. version)
£500.60
c/w PDA200E amplifier, AMR/H handheld radio mic, APQM plate, 2 x APXM plate
AKH1/L
PDA200E 120m2 Health and fitness club loop kit (lavalier mic. version)
£464.15
c/w PDA200E amplifier, AMR/L lavalier radio mic, APQM plate, APL plate
AKH1/H
PDA200E 120m2 Health and fitness club loop kit (handheld mic. version) £464.15
c/w PDA200E amplifier, AMR/H handheld radio mic, APQM plate, APL plate
Please note: Loop cable is not included in the above ‘AK’ range kits. We recommend you use 1mm2 single core cable such
as C-TEC’s LOOP2/B or LOOP2/W cable which is available in 100m reels (see overleaf for pricing details).
Also available, the AKM2 induction loop kit for elevators - contact our sales desk/technical dept. for details
£224.68
PROFESSIONAL (120m2 to 550m2) INDUCTION LOOP AMPLIFIERS
PDA200
120m2 free standing induction loop amplifier
PDA800
400m2 free standing induction loop amplifier
£288.69
£369.71
PDA500
220m2 rack mount induction loop amplifier
£392.16
PDA1000
550m2 rack mount induction loop amplifier
£448.73
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
page 21
solidstatesecurity.co.uk
INDUCTION LOOP EQUIPMENT
PDA RANGE OUTREACH PLATE AUDIO INPUT EXTENSION SYSTEM
CAN BE USED TO INCREASE THE NUMBER OF AUDIO INPUTS ON AN INDUCTION LOOP SYSTEM*
* A separate 12V PSU may be required when connecting outreach plates to amplifiers other than the PDA200E, ML1 or PDA102
Outreach plates should be wired using Belden 8723 audio cable - see induction loop cable section below for details.
APJ
3.5mm mono jack plate, for connection of AMT, AMH, AML or AMD microphones
£36.45
APL
Line level audio plate, for connection of APS SCART lead/other line level audio feeds
£36.45
APQM
6.35mm stereo jack plate, for connection of AMR/L & AMR/H radio microphone kit
£36.45
APQL
6.35mm stereo jack plate, for connection of line level feeds from mixing desks, etc
£36.45
APXM
XLR mic level plate, for connection of AMP microphone
£36.45
APXL
XLR line level plate, for connection of line level feeds from mixing desks, etc
£36.45
APM
Omni-directional plated microphone, for wall/ceiling/desk mounting
£36.45
API
AFILS active indicator light
£36.45
APS
SCART to double phono lead (for use with APL plate)
£3.57
PDA RANGE MICROPHONES
APM
Omni-directional plated microphone, for wall/ceiling/desk mounting
£36.45
For direct connection to ML1, PDA102, PDA200E or an outreach chain
AMT
AMH
AML
AMD
AMP
Tie/desk microphone for ML1, PDA102, PDA200E, PL1 or APJ outreach plate
Handheld microphone for ML1, PDA102, PDA200E, PL1 or APJ outreach plate
Lectern microphone for ML1, PDA102, PDA200E, PL1 or APJ outreach plate
Desktop microphone for ML1, PDA102, PDA200E, PL1 or APJ outreach plate
Professional handheld microphone
£3.48
£14.00
£25.00
£43.09
£138.25
For PDA200E or APXM outreach plate (requires AXLR lead)
AMR/L
Levalier radio microphone c/w mic, receiver, transmitter, psu
£214.25
For PDA200E or APQM outreach plate
AMR/H
Handheld radio microphone c/w mic, receiver, transmitter, psu
£214.25
For PDA200E or APQM outreach plate
INDUCTION LOOP TEST EQUIPMENT
RXTI2
PNGN
AHHM
AMPN
Induction loop test receiver requires 2 x AAA batteries & walkman type headphones £58.79
Pink noise generator requires 1 x PP3 battery and AL1, AL2 or AL3 connection lead
£61.90
FoSmeter magnetic field strength meter - requires 1 x PP3 battery
£92.86
FoSmeter+ combined pink noise generator & magnetic field strength meter £123.81
requires 1 x PP3 battery and AL1, AL2 or AL3 connection lead
AHHM/H
FoSmeter H combined magnetic field strength meter & loop listener
£80.00
requires 1 x PP3 battery & 32Ω headphones such as C-TEC’s HEAD1 headphones
HEAD1
AL1
AL2
AL3
32Ω headphones for use with AHHM/H
3.5mm jack to 3.5mm jack lead (connects PNGN to APJ outreach plate)
3.5mm jack to double phono lead (connects PNGN to APL outreach plate or DL50)
3.5mm jack to pre-cut bare ended lead
£22.20
£7.50
£7.50
£7.50
INDUCTION LOOP CABLE & MISCELLANEOUS OTHER AFILS ANCILLARIES
Loop cable is included in all ML1/K, DL50/K and PDA102 range induction loop kits.
For PDA200E/AK Range kits we recommend LOOP2/B or LOOP2/W cable.
For other PDA range loop amplifiers, call our technical dept. for advice on what cable you should use.
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
page 22
LOOP1/B
LOOP1/W
LOOP2/B
LOOP2/W
LOOP3/B
LOOP3/W
LOOP4/B
LOOP4/W
FLAT1005
FLAT2005
FLAT3005
TAPE
BELDEN/10
BELDEN/25
APT
AXLR
LEST
TEAR10
100m reel 0.5mm2 single core black loop cable
100m reel 0.5mm2 single core white loop cable
100m reel 1.0mm2 single core black loop cable
100m reel 1.0mm2 single core white loop cable
100m reel 1.5mm2 single core black loop cable
100m reel 1.5mm2 single core white loop cable
100m reel 2.5mm2 single core black loop cable
100m reel 2.5mm2 single core white loop cable
100m x 0.5mm2 insulated copper tape (flat loop cable for under carpets)
100m x 1.0 mm2 insulated copper tape (flat loop cable for under carpets)
100m x 1.5mm2 insulated copper tape (flat loop cable for under carpets)
50m white synthetic fibre tape (used to protect flat loop cable)
10m Belden 8723 four core screened cable for use with outreach plates
25m Belden 8723 four core screened cable for use with outreach plates
Loop connector plate (for the termination of induction loop cable)
XLR to XLR lead (used to connect AMP mic to APXM outreach plate)
100V line (i.e PA system output) to 0db (775mV line level) convertor
Pack of 10 self-adhesive ‘induction loop fitted’ stickers
£21.67
£21.67
£35.40
£35.40
£50.55
£50.55
£83.77
£83.77
£71.81
£88.81
£105.81
£9.48
£17.33
£43.33
£36.45
£12.15
£25.49
£9.11
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
solidstatesecurity.co.uk
INFRARED ASSISTIVE LISTENING SYSTEMS
INFRARED ASSISTIVE LISTENING SYSTEMS
NEW
MODULATORS / RADIATORS
SI30
0.5W modulator/radiator, 2.3/2.8MHz
£240.88
Mono/stereo operation, coverage 80m2 mono, 40m2 stereo
Requires NT20-1-UK or NT20-4-UK PSU
SZI30
Slave 0.5W radiator
£173.88
Coverage 80m2 mono, 40m2 stereo; daisychain to SI30 to increase coverage
Requires NT20-1-UK or NT20-4-UK PSU
NT20-1-UK 24VDC/200mA Plug in mains PSU for one SI30 or SZI30
£81.28
NT20-4-UK 24VDC/500mA Plug in mains PSU for up to four SI30/SZI30s (needs KKY20-015)
• Ideal for use in areas where the
installation of an audio-frequency
induction loop system is impractical
KKY20-015 4 way ‘octupus’ cable for use with NT20-4-UK
SZI1015-T
£161.11
£28.71
2W radiator/modulator, 2.3MHz
£958.50
Mono only, coverage 400m2, requires NT1015 PSU
• Modulators/radiators transmit sound
via invisible light beams to one or
more infrared receivers
SZI1015
• ‘Line of sight’ operation means no
‘spillover’ of the sound signal into
neighbouring rooms
NT1015
2W slave radiator
£871.00
Mono only, coverage 400m2, daisychain to SZI1015-T to increase coverage
Requires NT1015 PSU
NEW
Mains PSU for one SZI1015-T or SZI1015
£166.66
ATTACHMENTS / CABLES FOR MODULATORS & RADIATORS
• Ideal for persons with mild or
moderate hearing loss
GZG1029
Swivel joint for mounting SI30 or SZI1015-T
£92.52
GZP10
Mounting plate for wall or ceiling mounting SI30, SZI30, SZI1015-T or SZI1015
£46.26
• Special RI150/L ‘neck loop’ receiver
converts the infrared signal into a
mini-induction loop field that can be
picked up by any hearing aid with a
telecoil / ‘T’ position
IZM20
Cluster mounting kit for up to 4 rotatable SI30/SZI30s
£30.31
• Receivers also available for use by
the non-hearing impaired
KR20-7
Each SI30/SZI30 will require a IZK20 mounting clamp
IZK20
Mounting clip for SI30 / SZI30
£15.95
KR20-015
0.15m IR extension cable for SI30 / SZI30 when used with IZM20
£12.78
3.5mm mono jack to 3.5mm mono jack
7m IR extension cable for SI30/SZI30
£22.33
3.5mm mono jack to 3.5mm mono jack
NEW
RECEIVERS
RI150/L
Infared receiver with neck induction loop for hard of hearing, mono
£140.38
c/w BA151 rechargeable accupack
RI150
Stethoset infrared receiver for able hearing, mono
£106.86
c/w BA151 rechargeable accupack
HDI302
Professional Stethoset receiver for able hearing, mono or stereo
£279.16
c/w BA151 rechargeable accupack
BA151
L151-10
NT92-UK
Spare Rechargable accupack for RI150/L, RI150, HDI302
Charger for up to 10 receivers (RI150-T; RI150, HDI302), needs NT92-UK PSU
200mA plug-in mains PSU for L151-10 charger
Solid State Security Ltd, Hartfield House, 54 Chorley Road, Hilldale, Parbold, Wigan WN8 7AS
01257 463018
01257 462038
[email protected]
£15.92
£288.74
£51.05
page 23
solidstatesecurity.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement