Solid-state Relay G3R-I/O
Solid-state Relay
G3R-I/O
Compact SSRs for I/O Interface with
High Dielectric Strength Requirements
High-speed models with optimum input ratings for a
variety of sensors are available.
Input Modules and Output Modules that can be
used for the G2R are available.
Using a coupler approved by VDE 0884 and
assuring an I/O dielectric strength of 4 kV.
Incorporating an easy-to-see monitoring indicator.
Approved by UL, CSA, and TÜV with -UTU Version.
RCE
Ordering Information
Input Module
Isolation
Photocoupler
Indicator
Yes
Response speed
---
Logic level
Rated input
Supply voltage
Supply current
4 to 32 VDC
0.1 to 100 mA
Model
voltage
100 to 240 VAC
G3R-IAZR1SN
High-speed
g s eed
(1 kHz)
kH )
5 VDC
G3R-IDZR1SN
Low-speed
o s eed
(10 Hz)
H )
5 VDC
12 to 24 VDC
G3R-IDZR1SN-1
12 to 24 VDC
Output Module
Isolation
Phototriac
Indicator
Yes
Zero cross
function
Yes
Applicable output
load
2 A at 75 to 264 VAC
Rated input
5 to 24 VDC
No
Photocoupler
Note:
---
Accessories (Order Separately)
Model
P2RF-05-E
Number of poles
1 pole (G2R: 1 pole usage)
Connecting Socket Attaching Plate
Model
P2R-P
188
Applicable Socket
P2R-05A
G3R-OA202SZN
G3R-OA202SLN
2 A at 4 to 60 VDC
G3R-ODX02SN
1.5 A at 40 to 200
VDC
G3R-OD201SN
When ordering a TÜV approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU.
Track/Surface Mounting Sockets
Model
G3R-I/O
G3R-I/O
I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark indication
Specification
AC IN
Input module, AC input
DC IN
Input module, DC input
AC OUT
Output module, AC output
DC OUT
Output module, DC output
Mark attached to the top of the product
Specifications
Ratings
Input Module
Input
Model
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-IAZR1SN
100 to 240 VAC
60 to 264 VAC
15 mA max.
60 VAC max.
20 VAC min.
G3R-IDZR1SN
5 VDC
4 to 6 VDC
8 mA max.
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
5 VDC
4 to 6 VDC
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
G3R-IDZR1SN-1
Output
Model
Logic level supply voltage
G3R-IAZR1SN
4 to 32 VDC
Logic level supply current
0.1 to 100 mA
G3R-IDZR1SN
G3R-IDZR1SN-1
Output Module
Input
Model
G3R-OA202SZN
Rated voltage
5 to 24 VDC
Operating voltage
4 to 32 VDC
G3R-OA202SLN
G3R-ODX02SN
Input current
15
5 mA max.
a
( t 25°C)
(at
Must operate
voltage
Must release
voltage
4 VDC max.
1 VDC min.
8 mA max.
G3R-OD201SN
Output
Model
G3R-OA202SZN
Load voltage
Load current (see note)
Inrush current
75 to 264 VAC
0.05 to 2 A
30 A (60 Hz, 1 cycle)
G3R-ODX02SN
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
G3R-OD201SN
40 to 200 VDC
0.01 to 1.5 A
8 A (10 ms)
G3R-OA202SLN
Note:
The minimum current value is measured at 10°C min.
189
G3R-I/O
G3R-I/O
Characteristics
Input Module
Item
G3R-IAZR1SN
G3R-IDZR1SN
G3R-IDZR1SN-1
Operate time
20 ms max.
0.1 ms max.
15 ms max.
Release time
20 ms max.
0.1 ms max.
15 ms max.
Response frequency
10 Hz
1 kHz
10 Hz
Output ON voltage drop
1.6 V max.
Leakage current
5 µA max.
Insulation resistance
100 MΩ min. between input and output
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
1,000 m/s2
Ambient temperature
Operating: –30°C to 80°C (with no icing)
Storage: –30°C to 100°C (with no icing)
Approved standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Operating: 45% to 85%
Weight
Approx. 18 g
Output Module
Item
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX025N
Operate time
1/2 of load power source cycle + 1 ms max.
1 ms max.
Release time
1/2 of load power source cycle + 1 ms max.
2 ms max.
Response frequency
20 Hz
100 kHz
Output ON voltage drop
1.6 V max.
Leakage current
1.5 mA max.
Insulation resistance
100 MΩ min. between input and output
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
1,000 m/s2
Ambient temperature
Operating: –30°C to 80°C (with no icing)
Storage: –30°C to 100°C (with no icing)
Approved standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Operating: 45% to 85%
Weight
Approx. 18 g
190
G3R-OA201SN
2.5 V max.
1 mA max.
G3R-I/O
G3R-I/O
Engineering Data
Load Current vs. Ambient Temperature
Characteristics
G3R-ODX02SN (4 to 60 VDC)
G3R-OA202SZN/OA202SLN
4-point mounting (see note 1)
4-point mounting (see note 1)
2
2
Single-point
mounting
1
0.7
0.5
2
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
Load current (A)
16-point mounting (see note 2)
1.5
1.4
Load current (A)
Load current (A)
G3R-OD201SN (40 to 200 VAC)
0
20 30 40 55 60
80
100
–30 –20
Ambient temperature (°C)
Note:
1.1
1
Single-point
mounting
16-point mounting
(see note 2)
0.6
0.5
0.5
–30 –20
4-point mounting (see note 1)
1.5
0
20
40 55 60
80
100
–30 –20
Ambient temperature (°C)
0
20
40 55 60
80
100
Ambient temperature (°C)
1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3R-OA202SZN/OA202SLN
G3R-ODX02SN
G3R-OD201SN
10
10
9
9
8
8
20
10
10
30 50 100 200
500 1000
5000
Inrush current (A)
Inrush current (A)
Inrush current (A)
30
7
6
5
4
3
7
6
5
4
3
2
2
1
1
0
10
Energizing time (ms)
30 50
100
300 500 1000 2000
Energizing time (ms)
0
10
30 50
100
300 500 1000 2000
Energizing time (ms)
Operation
Precaution of Mounting Output Modules
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
G3R
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
ÉÉÉÉ
G3R
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
É
ÉÉ
É
ÉÉ
É
ÉÉ
É
ÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉ
É
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉÉ
ÉÉ
G3R
191
G3R-I/O
G3R-I/O
Dimensions
Note:
All units are in millimeters unless otherwise indicated.
G3R
Terminal Arrangement/
Internal Connections
(Bottom View)
1
5.2
3
(+)
4
9.6
0.5
29 max.
1
13 max.
5
28 max.
(–)
17.4
4.75
4
Load
5
7.5
3
4.7
Input
0.5 4.75
4
10
1
5
(–)
(+)
2
20
Connecting Sockets
Connecting Socket Attaching Plates
P2RF-05
G3RZ Relay
4 dia.
4.2-dia. hole
71.5 max.
P2RF-05 Socket
58.5 *
M3 (M3 x16) or
3.2-dia. hole
19.5 max.
30 max.
54 max.
* Indicates a value when using the PFP-jN
Supporting Rail.
The value is 67.5 when using the PFP-jN2.
G3RZ Relay
P2RF-05-E
59 max.
48 max.
M3.5 screw
3.2-dia. hole
PFRF-05-E
Socket
3.5-dia.
hole
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
Indicates a value when using the PFP-jN
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the PFP-jN2.
*** Indicates a value when using the PFP-jN
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the PFP-jN2.
61 max.
P2R-05A
**
14.5 max.
G3RZ Relay
35.5 max.
P2R-05A Socket
Five, 3x1.5-dia. hole
(Panel thickness must
be 1.6 to 2.0 mm.)
36 max.
192
G3R-I/O
G3R-I/O
14.5 max.
P2R-05P
Five, 1.6-dia. hole
G3RZ Relay
35.5 max.
P2R-05P Socket
36 max.
Dimensional tolerance is ±0.1.
14 max.
Five, 1.6-dia. hole
P2R-057P
G3RZ Relay
32 max.
P2R-057P Socket
41 max.
Socket Mounting Plate
Use the Socket Mounting Plate when arranging several Sockets in a row.
R2.25
10 ellipses
Square hole
193
G3R-I/O
G3R-I/O
G70A I/O Block Base
Ordering Information
Classification
Output
Input
Note:
Internal I/O circuit common
Rated voltage
Model
NPN (+ common)
24 VDC
G70A-ZOC16-3
PNP (– common)
24 VDC
G70A-ZOC16-4
NPN/PNP
110 VDC max., 240 VAC max.
(see note)
G70A-ZIM16-5
Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
Dimensions
Note:
All units are in millimeters unless otherwise indicated.
G70A-ZOC16 (Output)
234
64
+0.2
35.3 –0
75
28.6
M3.5
9.2 19.6
20.7
34.2
48.7
G70A-ZIM16 (Input)
234
48.7
10.2
35.3 +0.2
–0
75
M3.5
9.2 19.6
20.7
34.2
54
194
G3R-I/O
G3R-I/O
Installation
Terminal Arrangement/Internal Connection
G70A-ZOC16-3 (NPN)
–
+
–
+
Connector Terminal
Arrangement
(Top View)
G70A-ZOC16-4 (PNP)
–
+
–
+
Connector Terminal
Arrangement
(Top View)
195
G3R-I/O
G3R-I/O
G70A-ZIM16-5 (NPN/PNP)
1A1
–
+
–
+
COM.
2A1
1A2
3A1
2A2
4A1
3A2
5A1
4A2
6A1
5A2
7A1
6A2
8A1
7A2
9A1
8A2
10A1
9A2
11A1
10A2
12A1
11A2
13A1
12A2
14A1
13A2
15A1
14A2
16A1
15A2
16A2
Connector Terminal
Arrangement
(Top View)
Precautions
Refer to pages 11 to 19 for general precautions.
Protective Element
Connection
Since the SSR does not incorporate an overvoltage absorption
component, be sure to connect an overvoltage absorption component when using the SSR under an inductive load.
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K091-E1-1A
196
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement