Product Catalogue v16.1
p. 1
Product Catalogue
v16.1
Boiling and Chilled Water
Water Heating
Hand Dryers
Space Heating
p. 2
Introduction
Hyco has been established for over 25 years
and is a leading player in the UK electric
water heating market as well as specialising
in hand dryers and space heating. We are
a manufacturer and distributor to many
of the UK’s leading electrical wholesalers
and plumbers merchants.
Quality and Innovation
Specification
Hyco has a specification team working
nationally with architects, mechanical
and electrical consulting engineers and
contractors to ensure the correct product
is selected right from the project
design stage.
Customer Service
Hyco is committed to customer satisfaction
and our sales and technical teams are always
on hand to offer advice and support on any
issue from installation to arranging delivery
of urgent orders direct to site to arrive at the
start of the next working day.
Technical Support
Hyco provides comprehensive pre
and post sales technical support to end
users, installers, architects and distributors.
Our Technical Sales team will help ensure
that customers get the right product
every time.
Stock Availability
We have high stock availability and offer
free next day delivery on most orders.
p. 3
The new Zen Boiling and Chilled Tap range,
the Zen Font and the Omega Wall Mounted
Boiling Water Heater demonstrate Hyco’s
commitment to quality products, energy
efficiency, continuous innovation and UK
based design and assembly.
Contents
Boiling and Chilled Water
Zen Boiling and Chilled Tap Range
Zen Solo Boiling Water Tap
Zen Spa 2 in 1 Boiling and Chilled Tap
Zen Life 3 in 1 Boiling Tap with Hot and Cold Mixer
Zen Ice 2 in 1 Cold Drinks Station
Zen Font with Drain
Omega Wall Mounted Boiling Water Heater
Microboil Wall Mounted Boiling Water Heater
Sapphire Stainless Steel Water Cooler Floor Standing
Sapphire Water Cooler Floor Standing Hot and Cold
Drinking Water Filters
8 - 11
12
14
16
18
20
22
24
26
28
30
p. 4
Water Heating
Energy Related Products (ErP) Ratings
Speedflow Unvented Undersink 5 – 15 litre
Speedflow Accessories
Powerflow Unvented Multipoint 30 – 90 litre
Thermostatic Mixing Valve
Everlast Unvented 90 – 600 litre
Rho Instantaneous 4.4 and 6.0 kW
Aquila Instantaneous 9.6 kW
Instantaneous Performance Charts
Taps: Non-Concussive, Mixer, Infrared
Wave Instantaneous Handwash, Manual and Automatic
Handyflow Oversink Vented 5 litre
Handyflow Undersink Vented 5 litre
33
34
36
38
40
42
44
46
48
50
52
54
56
Hand Dryers and Hair Dryers
Jetstream Blade
Jetstream Ellipse
Jetstream Curve
Jetstream Slimline
60
62
64
66
Jetstream Arc
Tornado
Cyclone
Hurricane
68
70
72
74
Topaz Digital Hair Dryer
Opal Holster Style Hair Dryer
Jade Traditional Hair Dryer
76
78
80
Space Heating
Fixed Heating
Accona Panel Heater
Scirocco Convector Heater
Maestro Air Curtain
Novara PTC High Level Heater
Mistral Bathroom Fan Heater
Zephyr Downflow Fan Heater – High Level
Arezzo Downflow Fan Heater – Low Level
84
86
88
90
92
94
96
Aztec Industrial Fan Heater
Fiji Fan Heater
Riviera Oil Filled Radiator
p. 5
Portable Heating
98
100
102
Frost Protection
Sahara Tubular Heaters
Sahara Tubular Heater Guards
Mojave Frost Protector 400 W
Inca Frost Protector 200 W
104
106
108
110
Towel Rails
Alize S Shape
Aquilo Ladder Style
112
114
Quartz Infrared
Sun Prince Indoor Halogen
Quartz Controller
Sun King Outdoor Halogen
116
118
120
p. 6
Product Category
Boiling and Chilled
Water
p. 7
Boiling and Chilled Water
Zen Boiling and Chilled Tap Range
p. 8
Usage
The Zen Boiling and Chilled Tap Range delivers elegant practical
solutions for your domestic or commercial kitchen, providing
tailored combinations of boiling water for tea and coffee making,
high quality cold drinking water and kitchen hot and cold mixer
tap capabilities.
100°C or 98°C
Filtered Cold
Hot & Cold Mixer
Filtered Chilled
Sparkling
Boiling and Chilled Tap Options
Product codes in the table are for Zen taps with 3 litre boiling water tank.
For 6 litre tank models replace 3L with 6L in the product code.
Product
Product Code
Boiling Water
Temperature
(°C)
Filtered
Cold
(Ambient)
Filtered
Chilled*
Hot & Cold
Mixer
Zen Solo SOLO3L100 100
SOLO3L98 98
Zen Spa
SPA3L100
SPA3L98
SPA3L100C
SPA3L98C
100
98
100
98
Zen Life
LIFE3L100
LIFE3L98
100
98
Zen Ice
ICESOLO
ICESOLOC
ICESPAC
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*Upgrade to sparkling on any of the filtered chilled Zen Spa or Zen Ice models
Boiling and Chilled Water
Zen Boiling Range
Features and Benefits
Energy Efficiency
One of the most energy efficient boiling water taps available. Innovative
aerogel insulation around the boiling water tank keeps energy losses
to a minimum. The Zen tap with 3 litre boiling water tank has energy
losses of 15 W (0.36 kWh/day) for the 98°C models and 17 W
(0.42 kWh/day) for the 100°C models.
Smart Technology
Algorithms learn and predict boiling water usage. On when you need it,
off when you don’t, increasing energy efficiency.
Ready Profile
User Profile
p. 9
12am
6am
12pm
6pm
12am
Tank Capacity
The capacity of the boiling water tank is 3 litres as standard or 2 x 3 litre
tanks to provide 6 litre capacity.
Safety Features
Safety lock mechanism on boiling side.
Cool touch insulated tap.
Designed and assembled in the UK
At our head office in West Yorkshire.
Warranty
At Hyco we take pride in the design, quality and innovation of our products.
The full Zen range is covered by a 2 year parts or replacement warranty.
Boiling and Chilled Water
Zen Solo
In stock now
See page 12
Features and Benefits
p. 10
• Dedicated boiling water tap
•Instant true boiling 100°C
or 98°C water ideal for a wide range of kitchen uses
• Cool touch insulated tap
• Safety lock
• 3 and 6 litre capacity
100°C or 98°C
Zen Spa
Coming soon
See page 14
100°C or 98°C
Filtered Cold
Filtered Chilled
Features and Benefits
•Boiling and chilled tap
•2 in 1 hot and cold
drinks station
• Instant true boiling 100°C
or 98°C water ideal for a wide range of kitchen uses
• High quality cold (ambient),
chilled or sparkling
drinking water
• Filter included
• Safety lock on boiling side
Sparkling
Boiling and Chilled Water
Zen Life
Coming soon
See page 16
100°C or 98°C
Hot & Cold Mixer
p. 11
Features and Benefits
• Elegant 3 in 1 tap
• Instant true boiling 100°C
or 98°C water ideal for a wide range of kitchen uses
• Standard sink hot and cold mixer
• Safety lock on the boiling side
• The only tap you need
in your kitchen
• Perfect for retro-fit applications as well as new kitchens
Zen Ice
Coming Soon
See page 18
Filtered Cold
Filtered Chilled
Sparkling
Features and Benefits
•Cold drinks station
• Includes Zen range tap,
undersink chiller and drinking
water filter
Boiling and Chilled Water
Zen Solo
Boiling Water Tap
3 and 6 litre boiling water tank
Usage
A Zen Solo boiling water tap is a stylish, modern, time and space
saving addition to any kitchen replacing the need for a traditional
kettle, counter top or wall mounted boiling water unit.
p. 12
Instant boiling water is ideal for a wide range of kitchen uses
including tea and coffee making, providing a quick start for boiling
rice, pasta and vegetables and soaking oven dishes.
Features and Benefits
• Dedicated boiling water tap
•Choice of two temperature
models provide instant true
boiling 100°C or near boiling
98°C water
•Time saving – provides instant
hot water so no waiting for
the kettle to boil
•Space saving – frees up worktop
space by eliminating the need
for a kettle
•Energy saving – no energy
wasted boiling more water
than is required
•Innovative aerogel insulation
• Smart technology algorithms
learn and predict usage: on when you need it, off when you don’t
• Low energy losses
- see table below
•Designed and assembled
in the UK
• Polished chrome 360° swivel tap
• Cool touch insulated tap
• Status ring on base of tap
to indicate ready or heating (green/red LED)
• Safety lock
• Flow rate 2 l/m
• 3 litre tank as standard
or 2 x 3 litre tanks to provide
6 litre capacity
• Power rating 1.55 kW for
3 litre model and 2 x 1.55 kW
for 6 litre model
•Supplied with expansion vessel
and pressure relief valve
• Zen font and drain available soon
(see page 20)
• If you are in a hard scale area
you may need a scale filter
(see page 30)
Product codes in the table are for Zen taps with 3 litre tank.
For 6 litre tank models replace 3L with 6L in the product code.
Product Code
Temperature
(°C)
Heat Up Time
(mins)
Standing Loss
(kWh/day)*
SOLO3L100
100
14
0.42
17 W
SOLO3L98
98
13
0.36
15 W
*The standing loss for the 6 litre model which comprises 2 x 3L tanks will be double the value in the table
Boiling and Chilled Water
Outer Casing
Tap-polished chrome finish
Tank-durable high impact PC/ABS
Water Tank
Stainless steel
Thermostat
Electronic to control water
up to boiling point
Intended for connection
to the mains water supply.
Minimum water pressure 1 bar.
Insulation
Highly efficient
aerogel thermal insulation
Maximum water pressure 4.2 bar.
If higher than this a pressure
reducing valve may be required.
Initial Draw off
20 cups/13 mugs
based on 167ml cup
and 250ml mug.
Double draw off
for 6 litre model.
Supplied expansion vessel
and pressure relief valve must
be fitted.
Safety
Overheat temperature protection
(manual re-set).
Safety lock mechanism.
Supplied expansion vessel and
pressure relief valve must be fitted.
IP Rating
IPX1
Installation
This appliance must be installed
in a frost free environment.
Height
(mm)
ZEN Solo Tap 288
Electrical Connection
Installation must comply with
current IEE wiring regulations.
Supplied with a pre-wired
(1m) BS plug.
Approvals
CE
WRAS (98°C model only)
Standard Warranty
2 years parts or
replacement warranty.
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
152
49
1.1
–
181
220
4.3
7.3
(all models)
ZEN Solo
3L Tank
459
p. 13
Plumbing
Must be installed by a suitably
qualified person.
Heating Element
Stainless steel
Product Code
Required hole diameter
for mounting tap 32mm
– fits in a standard sink.
Sink/counter top up
to 50mm thick.
Boiling and Chilled Water
Zen Spa
Coming soon
2 in 1 Boiling and Chilled Tap
3 and 6 litre boiling water tank
Usage
The Zen Spa is a 2 in 1 hot and cold
drinks station from one simple, stylish
tap. Instant true boiling 100°C or 98°C
is available alongside filtered cold,
chilled or even sparkling water.
In home environments a Zen Spa
replaces the need for a kettle and
provides high quality cold (ambient)
drinking water to suit modern lifestyle
requirements.
p. 14
In office environments a Zen Spa replaces the traditional need
for a wall mounted boiling water unit and separate floor standing
chiller. The Zen Spa can be installed over a sink or with the stylish,
tempered glass design Zen Font.
Features and Benefits
• All of the features and benefits
of the Zen Solo plus cold
(ambient) or chilled drinking
water from a single tap
•Filtered cold (ambient) drinking
water models connect directly
to the incoming water supply
• Filtered chilled drinking
water models include
an undersink chiller
•High quality taste and odour
drinking water filter supplied
with all models (F1T). If you are
in a hard scale area you may
need to upgrade to a scale filter
(see page 30).
• Upgrade to sparkling water
chiller unit if desired
• Filtered cold (ambient) typically
for domestic use. Filtered chilled
typically for commercial use.
Zen Spa Options
Product Code
98 °C Boiling
SPA3L100
SPA3L98
Filtered Cold
Yes
Yes
Yes
SPA3L100C
SPA3L98C
100 °C Boiling
Filtered Chilled
Yes
Yes
Yes
Yes
Yes
Product codes in the table are for Zen Spa taps with 3 litre tank, for 6 litre tank models
replace 3L with 6L in the product code. Add suffix ‘G’ to any filtered chilled model
to provide sparkling water.
Product Code
Temperature
(°C)
Heat Up Time
(mins)
Standing Loss
(kWh/day)*
SPA3L100
SPA3L100C
100
14
0.42
17 W
SPA3L98
SPA3L98C
98
13
0.36
15 W
* Standing loss figures are for the boiling tank only. The standing loss for the 6 litre model
which comprises 2 x 3L tanks will be double the value in the table
Boiling and Chilled Water
Boiling Specification
** Undersink chiller unit has
the same specification as
the Zen Ice, please see page 18.
Outer Casing
Tap-polished chrome finish
Tank-durable high impact PC/ABS
Required hole diameter
for mounting tap 32mm
– fits in a standard sink.
Sink/counter top up
to 50mm thick.
p. 15
Water Tank
Stainless steel
Installation
This appliance must be installed
in a frost free environment.
Plumbing
Must be installed by a suitably
qualified person.
Heating Element
Stainless steel
Intended for connection
to the mains water supply.
Thermostat
Electronic to control water
up to boiling point
Minimum water pressure 1 bar.
Insulation
Highly efficient
aerogel thermal insulation
Maximum water pressure 4.2 bar.
If higher than this a pressure
reducing valve may be required.
Initial Draw off
20 cups/13 mugs
based on 167ml cup
and 250ml mug.
Double draw off
for 6 litre model.
Supplied expansion vessel
and pressure relief valve must
be fitted.
Safety
Overheat temperature protection
(manual re-set).
Safety lock mechanism.
Supplied expansion vessel and
pressure relief valve must be fitted.
IP Rating
IPX1
Electrical Connection
Installation must comply with
current IEE wiring regulations.
Supplied with a pre-wired
(1m) BS plug.
Approvals
CE
Standard Warranty
2 years parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
ZEN Spa Tap
320
224
56
1.6
–
459
181
220
4.3
7.3
(all models)
ZEN Spa 3L
Tank
Boiling and Chilled Water
Zen Life
Coming soon
Boiling Water Tap with Hot and Cold Mixer
3 and 6 litre boiling water tank
Usage
The Zen Life is a practical and stylish
choice when considering the design
and requirements of any kitchen
environment.
The elegant 3 in 1 tap provides instant
true boiling 100°C or 98°C water
alongside hot and cold mixer tap
capabilities.
It is perfect for retro-fit applications as well as new kitchens.
This is the only tap you need in your kitchen and is ideal
for a range of domestic and commercial applications.
p. 16
Features and Benefits
• Creates a clutter free
and simplified design within
any kitchen or office environment
•Instant true boiling 100°C
or 98°C water ideal for a wide range of kitchen uses
• Designed and assembled
in the UK
• Time, space and energy saving
• Straight-forward operation
with safety lock on the boiling water side
•Innovative aerogel insulation
on boiling water tank
minimises losses
• Boiling water tank has smart technology algorithms that learn and predict usage
• Cool touch insulated tap
with 360° swivel function
• Boiling water status ring
on base of tap to indicate ready or heating (green/red LED)
• Power rating 1.55 kW for 3 litre
model and 2 x 1.55 kW
for 6 litre model
• Standard sink hot and cold mixer supplied from your existing
hot and cold water supply
• Elongated mixer lever for ease
of use
• Consider installing a Speedflow
to provide hot water for dish
washing if there is no central
heating system nearby
• If you are in a hard scale area
you may need a scale filter
(see page 30)
Zen Life Options
Product Code
98°C Boiling Water
LIFE3L100
LIFE3L98
100°C Boiling Water Hot and Cold Mixer
Yes
Yes
Yes
Yes
Product codes in the table are for Zen Life taps with 3 litre tank, for 6 litre tank models replace
3L with 6L in the product code
Product Code
Temperature
(°C)
Heat Up Time
(mins)
Standing Loss
(kWh/day)*
LIFE3L100
100
14
0.42
17 W
LIFE3L98
98
13
0.36
15 W
*The standing loss for the 6 litre model which comprises 2 x 3L tanks will be double the value in the table
Boiling and Chilled Water
Outer Casing
Tap – polished chrome finish
Tank – durable high impact PC/ABS
Water Tank
Stainless steel
Required hole diameter
for mounting tap 32mm
– fits in a standard sink.
Sink/counter top up
to 50mm thick.
Thermostat
Electronic to control water
up to boiling point
Intended for connection
to the mains water supply.
Minimum water pressure 1 bar.
Insulation
Highly efficient
aerogel thermal insulation
Maximum water pressure 4.2 bar.
If higher than this a pressure
reducing valve may be required.
Initial Draw off
20 cups/13 mugs
based on 167ml cup
and 250ml mug.
Double draw off
for 6 litre model.
Supplied expansion vessel
and pressure relief valve must
be fitted.
Safety
Overheat temperature protection
(manual re-set).
Safety lock mechanism.
Supplied expansion vessel and
pressure relief valve must be fitted.
IP Rating
IPX1
Electrical Connection
Installation must comply with
current IEE wiring regulations.
Supplied with a pre-wired
(1m) BS plug.
Approvals
CE
Standard Warranty
2 years parts or
replacement warranty.
Installation
This appliance must be installed
in a frost free environment.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
ZEN Life Tap
365
286
54
2.5
–
459
181
220
4.3
7.3
(all models)
ZEN Life 3L
Tank
p. 17
Plumbing
Must be installed by a suitably
qualified person.
Heating Element
Stainless steel
Boiling and Chilled Water
Zen Ice
Coming soon
Cold Drinks Station
with Undersink Chiller
Usage
p. 18
Elegant cold drinks station supplying your choice of filtered
cold, chilled and sparkling water. Ideal for use with the Zen Font
in many domestic and commercial applications including office
kitchens and canteens.
Features and Benefits
• Stylish and practical Zen range
tap included to be counter mounted (suitable to fill sports
bottles/ carafes)
• Instant high quality filtered
drinking water
• High quality taste and odour
drinking water filter supplied
with all models (F1T)
(see page 30)
• Filter cartridges are simple
and quick to change
• Undersink chiller unit
can provide chilled water
adjustable to your chosen
temperature - choose a ‘C’ model
• Upgrade the chiller to provide
sparkling water if you desire
- choose a ‘CG’ model
• Zen Solo single outlet
tap provides any one
of cold (ambient), chilled
and sparkling options.
• Zen Spa double outlet tap will provide any two of cold (ambient), chilled or sparkling
water options.
• Plumbed in system gives reduced
costs over bottle fed coolers
• Aluminium heat exchanger
• Zen Solo single outlet tap
and filter available without
a chiller unit to connect direct
to mains cold water supply
for a lower cost filtered cold
(ambient) only drinking
water option
Zen Ice Options
Product Code
Undersink
Chiller Included
ICESOLO
ICESOLOC
ICESOLOCG
Yes
Yes
ICESPAC
ICESPACG
Yes
Yes
Product Code
Chiller Unit
C model
CG model
Filtered Cold
(Ambient)
Yes
Filtered
Chilled
Sparkling
Yes
Yes
Yes
Yes
Yes
Yes
Power
(kW)
Chill Capacity
(litres/hour)
Current
(amps)
0.155
0.155
25
25
0.6
0.6
Boiling and Chilled Water
Under sink Chiller Specification
** Zen Solo and Zen Spa Tap
dimensions can be found on pages
13 and 15.
Installation
Chilling requires the ambient
temperature to be between
10°C and 40°C.
Outer Casing
Metal
Plumbing
Must be installed by a suitably
qualified person.
Minimum water pressure 1 bar.
Maximum water pressure 3 bar.
If higher than this a pressure
reducing valve is required.
Maintenance
Sanitise every 6 months.
Change filter approximately
every 6 months.
Electrical Connection
Supplied with a pre-wired (1.5m)
black kettle lead cable BS plug.
See product instructions for full
maintenance requirements.
Approvals
CE
Refrigerant Type
R134A
Standard Warranty
2 years parts or
replacement warranty.
Sparkling Option
Supplied with a regulator
and initial gas cylinder.
IP Rating
IP20
Product Code
Chiller Unit
C model
CG model
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
440
440
180
180
330
330
19
19.5
p. 19
Capacity
150 glasses per hour
(based on 167ml glass)
Boiling and Chilled Water
Zen Font with Drain
Coming Soon
Usage
The Zen Font provides a stylish, sleek solution for installing
a Zen tap where access to a sink is unavailable or not desired.
p. 20
Features and Benefits
•Stunning tempered glass design
• High quality chrome grille
and stainless steel drain bowl
•Surround comes in two
contemporary glass finishes,
black or white
•Special order colours available
at additional cost
• Font with integrated drain
allows easy disposal of waste water
• Access to a drain is required
• Easy to clean
• Low maintenance
• Most suitable for use with
the Zen Solo, Zen Spa and Zen Ice
Product Code
Colour
Drain
ZENFB
Black
Yes
ZENFW
White
Yes
190
Boiling and Chilled Water
190
6
332
6
332
Font
Tempered glass
Drain Bowl
Stainless Steel
Grille
Chrome - diameter 125mm
Installation
Required hole diameter
for mounting tap 32mm
Sink/ counter top up
to 50mm thick.
Plumbing
Standard sink trap size,
34mm waste pipe.
Standard Warranty
2 years parts or
replacement warranty.
Product Code
Height*
(mm)
Length
(mm)
Width
(mm)
Weight
(kg)
ZENFB
66
332
190
0.1
ZENFW
66
332
190
0.1
* Height in the table includes the drain, excluding the drain, the height is 28mm.
p. 21
Required hole diameter for
mounting the bowl 127mm.
Boiling and Chilled Water
Omega
Coming Soon
Wall Mounted Boiling
Water Heater
3 and 5 litre
p. 22
Usage
The Omega is a practical, stylish wall mounted unit that
provides instant near-boiling water for preparing hot drinks
in the workplace. The sleek, ergonomic design with curved
lines gives a contemporary look whilst the robust, durable
design specification, featuring a long life ceramic valve,
makes it an essential appliance in the work environment.
Features and Benefits
• Designed and assembled
in the UK
•2.85 kW gives fast heat up time
and high recovery rate
•Time saving – provides instant
hot water so no need to wait
for the kettle to boil
•Space saving – frees up worktop
space by eliminating the need
for a kettle
•Energy saving – no energy
wasted boiling more water
than is required
•Status ring on base of control
valve to indicate ready or heating
(green/ red LED)
• Robust, heavy duty ceramic
control valve
• Cool touch control valve and
water outlet reduce heat losses
• Simple to use and easy to install
• Durable, high impact and easy
to clean white ABS case
• Sophisticated electronics maintain a constant supply
of hot water- even when
the unit is automatically re-filling after heavy usage
• 1 year on-site warranty
as standard
• 3 year on-site warranty available on request at additional cost
• It is highly recommended
that a filter system is fitted
to protect against scale build up. Units may need
to be de-scaled regularly. Scale damage is not
covered by warranty.
Product Code
Capacity
(litres)
Initial Draw Off
(Cups / Mugs)*
Heat Up Time
(mins)
OMEG3
3
18 / 12
6
OMEG5
5
30 / 20
10
*Initial draw off based on 167ml cup and 250ml mug
Boiling and Chilled Water
Outer Casing
Easy clean high impact
Polycarbonate/ ABS
Plumbing
Must be installed by a suitably
qualified person.
Heating Element
2.85 kW incoloy- sheathed
type element
Minimum water pressure 1 bar.
Maximum water pressure 10 bar.
Water Tank
Stainless steel
Insulation
EPP (expanded polypropylene)
Filter System
Optional extra - highly
recommended.
See page 30 for filter options.
p. 23
Water Connection
Inlet/ Outlet 2 x 1/2” BSP
female adapter.
1 x tundish recommended.
Thermostat
Electronic to control water
up to boiling point
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (1.5m),
to the bottom left.
IP Rating
IPX0
Recovery Rate
Recovery rate 175 cups per hour
for all models based on 167ml
cup size.
Installation
Install over a draining board,
or work top fitted with a drip tray.
At least 110mm clearance must
be left above and below the unit
to allow later removal of the jacket
for service.
Maintenance
It is recommended the unit
is descaled every 6 months.
Approvals
CE
Standard Warranty
1 year on-site warranty
as standard.
3 year on-site warranty available
at additional cost.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)*
Weight (kg)
Empty Full
OMEG3
500
331
253
7
10
OMEG5
500
331
253
7
12
*Depth includes front control. Distance of water outlet from wall is 180mm.
Boiling and Chilled Water
Microboil
Wall Mounted Boiling
Water Heater
3, 6, 8, 16 and 25 litre
p. 24
Usage
Provides instant near-boiling water for preparing
hot drinks in the workplace.
Features and Benefits
• Time saving – provides instant
hot water so no need to wait
for the kettle to boil
•Space saving – frees up
worktop space by eliminating
the need for a kettle
•Energy saving – no energy
wasted boiling more water
than is required
•Sophisticated electronics
maintain a constant supply
of hot water – even when the unit is automatically re-filling
after heavy usage
• Stylish and compact design
•Available in white or stainless
steel finish
• Simple to use and easy
to install
• Heavy duty catering style
chrome tap with lock-on option
•1 year on-site warranty
as standard
•3 year on-site warranty available
on request at additional cost
•For stainless steel models add
suffix ‘SS’ to the product code
e.g. MBS3SS
• It is highly recommended that
a filter system is fitted to protect
against scale build up. Units may
need to be de-scaled regularly.
Scale damage is not covered by
the warranty.
Product Code
Capacity
(litres)
Initial Draw Off
(Cups / Mugs)*
Heat Up Time
(mins)
MBS3
3
18 / 12
7
MBS6
6
38 / 25
14
MBS8
8
50 / 33
19
MBS16
16
100 / 66
38
MBS25
25
156 / 103
59
Boiling and Chilled Water
Plumbing
Must be installed by a suitably
qualified person.
Heating Element
2.4 kW, Incoloy-sheathed
type element
Minimum water pressure 1 bar.
Maximum water pressure
10.0 bar.
Thermostat
Electronic to control water
up to boiling point
Water Connection
Inlet/ Outlet 2 x 1/2” BSP male.
Fittings required (not supplied):
2 x 15mm compression to 1/2”
BSP female adapter.
1 x tundish recommended.
Water Tank
Copper
5 year corrosion guarantee
Electrical Connection
Installation must comply
with current IEE regulations.
Insulation
Polystyrene
Filter System
Optional extra
– highly recommended.
The product should be
connected to the fixed wiring
of the property via a double
pole fused spur with a minimum
break capacity of 13 amps.
See page 30 for filter options.
IP Rating
IPX0
Recovery Rate
Recovery rate 150 cups per hour
for all models based on 167ml
cup size.
Installation
Install over a draining board,
or work top fitted with a drip tray.
At least 40mm clearance must be
left above the unit to allow later
removal of the jacket for service.
Cable pre-wired (1.5m)
to the bottom left.
Maintenance
It is recommended the unit
is descaled every 6 months.
Approvals
CE, KIWA
Standard Warranty
1 year on-site warranty
as standard.
3 year on-site warranty
available at additional cost.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
MBS3
370
269
153
5.6
8.6
MBS6
420
312
171
7.2
14.8
MBS8
510
312
171
8.7
17.2
MBS16
545
364
218
10.8
28.8
MBS25
550
414
264
12.3
37.8
*Depth excludes the tap, for depth including tap add 90mm.
p. 25
Outer Casing
White powder coated steel
or stainless steel (SS)
Boiling and Chilled Water
Sapphire Stainless
Steel Water Cooler
Floor standing
Illustrated with optional
BREEAM kit fitted
p. 26
Usage
Ideal for high usage public areas, such as schools,
gyms and office areas.
Features and Benefits
•Instant high quality chilled
drinking water
• Plumbed in system gives reduced
costs over bottle fed coolers
• Elegant stylish design
• Stainless steel sink top
and cabinet
•Push button bubbler and sports
bottle/carafe filler included
• Direct chill technology
• High quality taste and odour
drinking water filter supplied
(F1T) (see page 30)
•Filter cartridges are simple
and quick to change
•Chilled water temperature
adjustable
• Optional BREEAM compliance kit
• Wall mounted water cooler available upon request
Product Code
Power
(kW)
Chill Capacity
(litres/hour)
Current
(amps)
SAP25SS
0.3
25
1.3
Boiling and Chilled Water
Outer Casing
Stainless steel
Plumbing
Must be installed by a suitably
qualified person.
Minimum water pressure 1 bar.
Maximum water pressure 3 bar,
if higher than this a pressure
reducing valve is required.
Capacity
150 glasses per hour
(based on 167ml glass)
BREEAM Compliance
BREEAM compliant when
fitted with optional BREEAM kit.
Kit comprises stainless steel side
panels and top panel as illustrated.
Water Connection
15mm push-fit.
Electrical Connection
Installation must comply
with current IEE regulations.
Cooler has adjustable foot
and can be bolted to the floor.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (1.5m),
entry to the back of the unit.
Refrigerant Type
R134A
Maintenance
Sanitise every 3 to 6 months.
IP Rating
IP23
Replace filter approximately
every 6 months.
Installation
Cooler must be positioned
60 – 70mm from the wall
to allow adequate ventilation.
See product instructions for full
maintenance requirements.
Ensures cooler securely fixed
to the wall and protects against
vandalism.
Approvals
CE
Chilling requires the ambient
temperature to be between
10°C and 45°C.
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
SAP25SS
960
340
325
25
BREEAM Kit
930
320
100
2
p. 27
Cooling Coil
Stainless steel
Boiling and Chilled Water
Sapphire Water Cooler
Floor standing
Hot and Cold
p. 28
Usage
Ideal for use in office areas and waiting areas
where there is moderate use.
Features and Benefits
•Instant high quality chilled
drinking water together with
filtered hot water for tea and
coffee making
•Plumbed in system gives reduced
costs over bottle fed coolers
• Compressor cooling
• Low noise design
• Unique child-lock for hot water
•Power on indicator light
•Leak detecting valve
• High quality taste and odour
drinking water filter supplied
(F1T) (see page 30)
• Filter cartridges are simple
and quick to change
• On/off switch for each
of the heating and cooling
functions
• Removable drip tray
Product Code
Power
(kW)
Chill Capacity
(litres/hour)
Current
(amps)
SAP02HC
0.58
2
2.5
Boiling and Chilled Water
300mm
1110mm
1110mm
1110mm
1110mm
300mm
395mm
Outer Casing
Easy clean, high impact plastic
395mm
Plumbing
Must be installed by a suitably
qualified person.
Working pressure 1-4 bar (supplied
with pressure reducing valve).
Heating Capacity
500 W>=90°C, 5 litres
per hour (30 glasses)
Hot tank capacity 1.1 litres
Electrical Connection
Supplied with a pre-wired (1.5m)
BS plug, entry at the back
of the unit.
Cooling Capacity
85 W<=10°C, 2 litres
per hour (10 glasses)
Cold tank capacity 3.3 litres
Maintenance
Sterilise the water tank every
3-6 months.
Replace filter approximately
every 6 months.
Refrigerant type
R134A/35g
See product instructions for
full maintenance requirements.
IP Rating
IPXO
Installation
Unit must be positioned
100 – 200mm from the wall
to allow adequate ventilation.
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Chilling requires the ambient
temperature to be between
18°C and 38°C.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
SAP02HC
1110
300
395
16
p. 29
Heating Element and Hot tank
Food grade steel
Boiling and Chilled Water
Drinking Water Filters
Taste and odour, scale
F1T and F2ST
F3SST and F4SST
Usage
A water filter is often fitted with our boiling and chilled water
products to provide high quality, great tasting drinking water.
There are two general types of filter available.
p. 30
Taste and odour carbon block filters help to improve the taste
of drinking water by removing some of the chlorine present in UK
mains water; these filters are ideal for cold/ chilled water feeds.
Scale inhibiting filters are strongly recommended for use with
boiling water products, particularly when installed in areas where
scale is a known issue. This type of filter also offers chlorine
reduction and helps to improve the taste.
Features and Benefits
•Quick and easy to change filters
• Automatic water shut off head
• Choice of filters to suit a variety of applications
• High capacity filters available
for heavy commercial use
• All filter models reduce chlorine,
improving taste and odour
•F2ST, F3SST and F4SST models
inhibit scale build up, reducing
service costs associated
to scale removal
• Does not remove important
minerals from water, unlike
most reverse osmosis or iron exchange units
• Integral mounting bracket
• All filters are WRAS approved
• Check system is suitable for
the water quality in your area
• Scale maps of the UK are readily
available online, please refer
to these for information
regarding water quality
in your area
• For help choosing the most
appropriate filter please contact
our sales team
• Some products are supplied with
a filter - please check relevant
product page
Product
Code
Function
Taste & Odour
Improvement
Scale
Use With
Reduction
F1T
Chlorine reduction in
cold water systems
Yes
No
Zen Ice, Any
cold supply
F2ST
As F1T plus scale
Yes
control (up to 300 ppm)
in moderate hard water
areas for low throughput
products*
Yes
Omega
Microboil
F3SST
F4SST
As F1T plus scale
Yes
control (up to 600ppm)
in high hard water areas
for high throughput
products*
Yes
Omega
Microboil
Zen Boiling
Taps
*ppm = parts per million CACO3
Boiling and Chilled Water
Installation
Wall mounting bracket integral
to the filter system.
Flush filter for 5 minutes prior
to use.
Maintenance
F1T and F2ST: Replace cartridge
after 6 months or when capacity
is reached, whichever is sooner.
F3SST and F4SST: Replace cartridge
after 12 months or when capacity
is reached, whichever is sooner.
If the water flow rate becomes slow
this is an indication that the filter
cartridge needs replacing.
Fitting a filter does not negate
the need to service and descale
your unit at regular intervals.
F1T replacement filter cartridge
only: F1TCAR
F2ST replacement filter cartridge
only: F2STCAR
F3SST replacement filter cartridge
only: F3SSTCAR
F4SST replacement filter cartridge
only: F4SSTCAR
Approvals
WRAS
Standard Warranty
Filters are warranted for defects
in material and workmanship only.
Plumbing
F1T and F2ST
1/4” push fit
F1T and F2ST: 6 months
F3SST and F4SST: 12 months
F3SST and F4SST
3/8” push fit
F2ST, F3SST and F4SST supplied
with adaptors to facilitate
connection to 15mm copper pipe.
Product Code
Particle Filtration
(micron)
Flow Rate
(l/m)
Capacity
(L)
F1T
1
1.9
5,678
F2ST
1
1.9
5,678
F3SST
5
3.7
12,000
F4SST
5
6.5
25,000
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
F1T
240
65
80
0.64
F2ST
240
65
80
0.64
F3SST
290
80
110
0.74
F4SST
490
80
110
1.24
p. 31
Replacement Cartridges
Product codes in the data tables
are for the full filter system
including the head.
For replacement cartridges
add suffix ‘CAR’ to the required
product code:
p. 32
Product Category
Water Heating
ErP Ratings
Such ratings provide transparency
of efficiency and a comparable
benchmark for water heating
products, as standardised
European Energy Labels
are used. This catalogue contains the
energy class for relevant water
heating products. The full
energy label and product fiche
information for each of these
products can be found
on our website.
hyco.co.uk
p. 33
The Energy Related Products (ErP)
Directive and Energy Labelling
Directive require that from
September 2015 all water heaters
in scope meet minimum energy
performance criteria and have
energy labels which provide
the energy rating of the product. The classifications range from
A++; this being the most efficient
and coded in green to a rating
of G; this being less efficient
and coded in red.
Water Heating
Speedflow
Unvented Water Heater
5, 10 and 15 litre
Glass Lined or Stainless Steel Tank
p. 34
Usage
Ideal for use in cloakrooms and kitchens in offices, shops,
student accommodation and domestic premises which have been
extended and there is no central hot water system near by.
One unit located under the kitchen sink is often used
to supply hot water for light dishwashing in the kitchen sink
and handwashing in the cloakroom basin.
Selection Guide (approximate depending on usage).
1 basin: SF05K, 1 – 2 basins: SF10K, 2 – 3 basins: SF15K
Features and Benefits
• Supplies hot water
for up to 3 basins
• Can be used with regular
taps including mixers
• Mains pressure flow rates
• 2.0 kW element as standard
• 1.2 kW element available for
10 and 15 litre models for restricted load applications
• Neon element on indicator
• Glass lined steel tank as standard
•Stainless steel tank available for
the 10 and 15 litre models. Add
suffix SS to the product code.
• External temperature control with frost protection setting
•Accessories may be needed to
comply with the Water Regulations.
Pressure reducing valve required
for pressures above 4.2 bar and
expansion vessel and check valve
required if cold water draw off
nearby. Kits available separately
(see Speedflow Accessories).
• Optional thermostatic mixing
valve available (see page 40)
• Not suitable for hair wash basins
in hairdressing salons
Product Code
Capacity
(litres)
Power
(kW)
Heat Up Time Standing Loss
(kWh/day)
(mins)*
SF05K
5
2.0
12
0.51
SF10K, SF10KSS
SF10K12, SF10K12SS
10
2.0
1.2
23
38
0.63
SF15K, SF15KSS
SF15K12, SF15K12SS
15
2.0
1.2
35
57
0.71
*Approximate heat up time from 10°C to 75°C
Water Heating
Outer Casing
Easy clean, high impact plastic
Heating Element
Stainless steel flange type
Water Tank
Glass lined steel as standard.
Stainless steel tank
optional upgrade.
Anode
Replaceable grey magnesium
(inspect annually)
Insulation
High density polyurethane foam
Safety
Overheat temperature
protection (manual reset).
Supplied pressure relief valve
must be fitted in every case
(set at 6 bar).
Frost protection if power on.
Optional thermostatic mixing valve
to maintain hot water supplied to
user at constant, safe temperature.
IP Rating
IPX4
Installation
Site above or below the sink, but
inlet and outlet must be at the top.
Floor standing or wall mounted.
It is recommended that flexible
hoses are used for connection to
facilitate future maintenance.
Access to the thermal cut-out and
element is located at base of unit.
Minimum water pressure 0.5 bar.
Maximum water pressure 4.2 bar.
Water Connection
Inlet/ Outlet 2 x 1/2” BSP male
(100mm apart centre to centre).
Fittings required (not supplied):
2 x 15mm compression to 1/2”
BSP female adapter.
Electrical Connection
Installation must comply with
current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (1.5m).
Approvals
CE, WRAS
Standard Warranty
Glass Lined Tank
1 year parts or replacement
warranty.
Stainless Steel Tank
3 year tank warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
SF05K
320
280
245
5.5
10.5
SF10K, SF10KSS
SF10K12, SF10K12SS
410
310
280
6.8
16.8
SF15K, SF15KSS
SF15K12, SF15K12SS
530
310
280
8.3
23.3
p. 35
Thermostat
Bulb type adj. to 75°C
E setting approx. 50°C
Plumbing
Must be installed by a suitably
qualified person.
Water Heating
Speedflow Accessories
Unvented Water Heater
5, 10 and 15 litre
Depending on the details of the Speedflow installation,
additional accessories may be needed to comply
with the Water Regulations.
See diagrams on the opposite page.
SF3 Kit
Expansion vessel and check valve
2 litre expansion vessel set at 3.5 bar
p. 36
SF4 Kit
Expansion vessel, check valve
and pressure reducing valve
SF5 Kit
Pressure reducing valve
Set at 3 bar
* All SF kit components WRAS approved
Accessory
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
Expansion
vessel
225
120
120
1.0
Check
valve
65
25
25
0.1
Pressure
reducing
valve
73
64
46
0.3
Water Heating
Diagram A
Pressure is below 4.2 bar and hot water expansion
can be accommodated in the pipework
Pressure
relief
valve
Hot
Nearest cold
draw off
Service valve
Cold
T piece
Cold water mains
To drain
Speedflow
Length of pipework
required for expansion
5 litres
10 litres
15 litres
1.4m
2.8m
4.2m
* No accessories needed
Diagram B
Pressure is below 4.2 bar and hot water expansion
cannot be accommodated in the pipework
Hot
Cold
Pressure
relief
valve
Nearest cold
draw off
Service valve
Check valve
Cold water mains
To drain
Speedflow
* Accessory SF3 needed
Diagram C
Pressure is above 4.2 bar and hot water expansion
cannot be accommodated in the pipework
Hot
Cold
Pressure
relief
valve
T piece
Expansion
vessel
Nearest cold
draw off
Check valve
Pressure
reducing
valve
Service valve
Cold water mains
To drain
Speedflow
* Accessory SF4 needed
Diagram D
Pressure is above 4.2 bar and hot water expansion
can be accommodated in the pipework
Hot
Cold
Pressure
relief
valve
T piece
Nearest cold
draw off
Pressure
reducing
valve
Service valve
Cold water mains
To drain
Speedflow
Length of pipework
required for expansion
5 litres
10 litres
15 litres
1.4m
2.8m
4.2m
* Accessory SF5 needed
p. 37
T piece
Expansion
vessel
Water Heating
Powerflow
30L
Unvented Water Heater
30, 50 and 90 litre
50L & 90L
p. 38
Usage
Suitable for hand washing and dishwashing where a number
of hot water outlets are required such as kitchens, schools,
restaurants, washrooms and offices. The ideal solution for light
industrial, commercial and light domestic hot water requirements.
Selection Guide (approximate depending on usage)
3 – 5 basins: PF30LC-1, 4 – 6 basins: PF50LC-1,
6 – 10 basins or 1 bed/1 shower: PF90LC-1
Features and Benefits
• Can be used with regular taps, including mixers
• Mains pressure flow rates
• 3.0 kW element as standard
• 1.0 kW element available for restricted load applications
• Stainless steel tank
• External temperature control
• Neon element on indicator
• 3 year tank warranty, 1 year
on electrical components
• Slimline profile
– depth from 295mm
• Highly efficient
thermal insulation
• Comprehensive range
of safety features
•Comes complete with
unvented accessory kit
• Optional thermostatic
mixing valve available
• Cable pre-wired (1.5m)
Product Code
Capacity
(litres)
Power
(kW)
Heat Up Time
(mins)*
Standing Loss
(kWh/day)
PF30LC-1
PF30LC1KW
30
3.0
1.0
21
63
0.93
PF50LC-1
PF50LC1KW
50
3.0
1.0
40
120
1.16
PF90LC-1
PF90LC1KW
90
3.0
1.0
86
258
1.25
*Heat up time from 13°C to 60°C
Water Heating
Access to the thermal cut-out and
element is located at base of unit.
Heating Element
Stainless steel incoloy
Unvented Accessory Kit
Supplied kit must be fitted.
Contains expansion vessel
with fixing bracket (5L for
PF30LC-1 and PF50LC-1, 8L
for PF90LC-1), inlet group,
flexible hose and 2 tundishes.
Thermostat
Capillary type adjustable to 65°C
Water Tank
Stainless steel
Anode
Replaceable grey magnesium
anode (inspect annually)
Insulation
High density polyurethane
foam (CFC free)
Safety
Overheat temperature
protection (manual reset).
Factory fitted temperature
and pressure relief valve
(set at 7 bar 90°C).
Pressure reducing valve
(set at 3 bar).
Pressure relief valve at 6 bar.
Optional thermostatic mixing valve
to maintain hot water supplied to
user at constant, safe temperature.
IP Rating
IPX4
Installation
Must be installed vertically with
inlet/outlet connections at base.
Space required above and below
unit to allow maintenance 400mm.
Plumbing
Must be installed by a suitably
qualified person.
Minimum water pressure 0.8 bar.
Maximum water pressure
to pressure reducing valve 12 bar.
Working water pressure 3 bar.
Water Connection
Inlet/outlet connection 1/2” BSP
male. (100mm apart centre to
centre) Fittings required (not
supplied): 2 x 15mm compression
to 1/2” BSP female adapter.
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a suitably rated isolating switch
with a contact separation of
at least 3mm in all poles.
Approvals
CE, WRAS, KIWA
Standard Warranty
1 year parts or replacement
warranty. 3 year tank warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
PF30LC-1
PF30LC1KW
620
380
295
9
39
PF50LC-1
PF50LC1KW
915
380
295
13
63
PF90LC-1
PF90LC1KW
930
540
385
24
114
p. 39
Outer Casing
Easy clean, high impact plastic
Water Heating
Thermostatic Mixing Valve
Unvented Accessory
TMV15-1
p. 40
Usage
For use with the Speedflow or Powerflow unit or larger unvented
cylinders, where maintaining water supply at a safe and constant
temperature is necessary. Ideal for use in many applications
including schools, hospitals, public washrooms, restaurants
and office and commercial kitchens.
Delivers safe hot water to basins, baths and showers.
Features and Benefits
• Allows water to be stored
at high temperatures and blended with cold water
to a pre-set outlet temperature
• Maintains water supply at
a safe and constant temperature
•Allows extension of effective
capacity by mixing high
temperature water with cold
to achieve the pre-set
temperature level
•Allows water to be safely
stored above 60°C
• Failsafe design
• Temperature setting
range 35 – 46°C
• Temperature accuracy ± 2°C
•Lockable control knob
with unique key to prevent
unauthorised temperature
adjustment
Product Code
Temperature
Setting Range (°C)
Cold Water
Connection (BSP)
Failsafe
TMV15-1
35 - 46
15mm
compression
Yes
Water Heating
Installation
Install on the hot outlet
of the water heater, with a separate
feed from the cold mains supply.
Water Connection
Hot & Cold inlet 2 x 15mm
compression.
Mixed Outlet 1 x 15mm
compression.
Fittings required
(not supplied): none.
Maximum inlet temperature 85°C.
Maximum inlet pressure ratio
(H/C or C/H) 5:1.
Minimum temp difference between
the inlet hot water and the outlet
mixed water for fail safe 10°C.
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
TMV15-1
115
140
37
0.5
p. 41
Plumbing
Must be installed by a suitably
qualified person.
Water Heating
Everlast Direct
Unvented Water Heater
90 to 600 litres
p. 42
Usage
The Everlast Direct is a large capacity unvented water heater
suitable for small flats and houses or much larger requirements
such as hotels, sports centres or nursing homes.
Features and Benefits
• Available in capacities
from 90 to 600 litres
• Mains pressure for high
flow rates
• 2 year warranty on the controls
• High quality duplex
stainless steel tank
• Reliable and flexible siting
due to external expansion
• 25 year tank guarantee
Product Code
(and litres)
Re - Heat Time Standing Loss Height
(minutes)*
(kWh/day)
(mm)
Diameter
(mm)
Weight (kg)
Empty Full
EVL90DR
69
0.96
EVL120DR
103
1.11
760
545
21
111
940
545
26
146
EVL150DR
137
EVL180DR
171
1.26
1140
545
33
183
1.40
1320
545
38
218
EVL210DR
EVL250DR
205
1.48
1510
545
41
251
221
1.76
1760
545
46
296
EVL300DR
308
2.03
1980
545
55
355
EVL400DR
345
2.80
1505
690
64
464
EVL500DR
447
3.25
1830
690
80
580
EVL600DR
564
3.90
2205
690
96
696
*Re-heat time is for 70% of the contents of the cylinder. Where cylinders are fitted
with multiple immersion heaters, performance is for lower 3 kW heater.
Water Heating
Outer Casing
Steel
Installation
Floor standing
Heating Element
Incoloy, immersion type:
1 x 3.0 kW 90 litres
2 x 3.0 kW > 90 litres <400 litres
Ensure floor can take
cylinder weight full.
Titanium:
3 x 3.0 kW > 400 litres
Thermostat
Rod type adjustable to 65°C
Water Tank
High quality duplex
stainless steel vessel
No sacrificial anode avoids
the need for regular inspection.
Insulation
Injected polyurethane foam
Cylinder Kit Contents
Cold water inlet set.
15 x 22mm tundish.
Temperature and pressure relief
valve (set at 7 bar 90°C).
Expansion vessel and bracket
12, 18 or 24 litre depending
on capacity.
Immersion heater(s).
Minimum flow rate required 20 l/m
Minimum water pressure 1.5 bar.
Maximum water pressure to
pressure reducing valve 15 bar.
Working water pressure 3 bar.
All cylinder connections
are 22mm compression.
Cylinder diameter excludes
external pipework.
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a suitably rated isolating switch
with a contact separation of at
least 3mm in all poles.
Approvals
CE, WRAS
Standard Warranty
2 year warranty on all controls.
25 year tank warranty.
Expansion relief valve set at 6 bar.
Pressure reducing valve
set at 3 bar.
Selection Guide
(approximate depending on usage)
Application
Suggested Product
1 bed / 1 shower
90 litre / 120 litre
2 bed / 1 bath / 1 shower
150 litre / 180 litre
3 bed / 1 bath / 2 showers
180 litre
4 bed / 1 bath / 2 showers
180 litre / 210 litre
4 bed / 1 bath / 3 showers
250 litre
5 Bed / 2 bath / 2 showers
300 litre
Large Domestic Dwellings
/ Commercial Applications
300 litre - 600 litre
p. 43
Safety
Overheat temperature protection
85°C (manual reset).
Plumbing
Must be installed by a suitably
qualified person.
Water Heating
Rho
Instantaneous Inline
Water Heater
Thermostatic and Non Thermostatic
4.4 and 6.0 kW
p. 44
Usage
Suitable for handwashing at a single sink. Confirm that the
flow rate and temperature performance is adequate for your
application using the chart and tables provided.
Features and Benefits
Thermostatic Model Only
• Supplies hot water
to a single outlet
•Bare wire heating system
gives fast heat up time
• Heats the water instantly
as it flows through the unit
• Energy efficient
– no standing heat losses
• 4.4 or 6.0 kW power rating
• Compact space saving design
•Intended for use with spray
head taps with removable
M22/M24 nozzles
•Compatible taps
available separately
•External electronic
thermostatic control accurate
to the nearest degree
•Blue LED temperature display
•Energy saving – only uses the
power required to deliver
the chosen temperature
• Heating power adjusted
electronically to compensate for
temperature, flow rate and water
pressure variations
•Temperature factory set at 38°C
and can be adjusted by the user
between 30°C and 48°C
•After power off/on the unit
will recall the last usage
outlet temperature
Product Code
Power
(kW)
Thermostatic
Max Flow Rate
Standing Loss
(l/m) handwash* (kWh/day)
IN44
IN44T
4.4
No
Yes
2.4
0.0
IN60
IN60T
6.0
No
Yes
3.3
0.0
*Flow rates based on incoming water supply temperature of 12°C, handwash at 38°C
Water Heating
Outer Casing
Easy clean high impact ABS
Heating Element
Bare-wire heating system
(3 nickel chrome heating elements)
Controls (Thermostatic Model only)
Temperature display (°C)
Power on/off button
The temperature display will
flash if the set temperature
cannot be reached.
Taps and Tap Spray Nozzles
Intended for use with spray head
taps with removable M22/M24
nozzles. Compatible taps available.
Important – the supplied tap
spray nozzle must be fitted
in the tap for best performance.
4.4 kW: 2.0 l/m, 6.0 kW: 2.5 l/m,
other flow rates available on
request.
Safety
Overheat temperature protection
80°C. Thermostatic model – water
temperature controlled to maintain
user selected temperature
between 30°C and 48°C as water
pressure conditions vary.
IP Rating
IPX4
Installation
This appliance must be installed
in a frost free environment.
Plumbing
Must be installed by a suitably
qualified person.
Minimum flow rate 2.0 l/m.
Minimum water pressure 1 bar.
Maximum water pressure 7.5 bar.
Water resistivity ≥ 1300 Ωcm.
Water Connection
Inlet/Outlet 2 x 1/2” BSP male
(40mm apart centre to centre).
Fittings required (not supplied):
2 x 15mm compression to 1/2”
BSP female adapter.
Suitable for use with pre-heated
water e.g. solar heating systems
subject to maximum inlet water
temperature 60°C.
Electrical Connection
Installation must comply
with current IEE regulations.
Single phase. Fuse rating guide
19 amps for 4.4 kW
and 27 amps for 6.0 kW.
The product should be connected
to the fixed wiring of the property
via a suitably rated isolating switch
with a contact separation
of at least 3mm in all poles.
Cable pre-wired (0.7m).
Approvals
CE, WRAS
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty
IN44
IN44T
140
190
80
1.56
IN60
IN60T
140
190
80
1.56
p. 45
+/- controls allow the user
to set the required temperature
The heater should be located
as close as practical to the hot
water outlet to avoid unnecessary
heat losses through the pipework.
Water Heating
Aquila
Instantaneous Inline
Water Heater
Thermostatic, 9.6 kW
p. 46
Usage
Suitable for hand washing at up to 2 basins, or for a single light
shower, or light dishwashing. Confirm that the flow rate and
temperature performance is adequate for your application using
the chart and tables provided.
Features and Benefits
•Supplies hot water to one or two
outlets depending on application
•Bare wire heating system gives
fast heat up time
•Heats the water instantly
as it flows through the unit
•Energy efficient
– no standing heat losses
•Energy saving – only uses the
power required to deliver the
chosen temperature
•External electronic
thermostatic control accurate
to the nearest degree
• 9.6 kW power rating
• Slimline design
•Heating power adjusted
electronically to compensate
for temperature, flow rate
and water pressure variations
•LED temperature display
•Temperature factory set at 38°C
and can be adjusted by the user
between 30°C and 60°C
• One programmable
memory setting
•After power off/on the unit will recall the last usage
outlet temperature
• Suitable for use with spray
head taps with removable
M22/M24 nozzles
– taps available separately
Product Code Power
(kW)
Thermostatic Max Flow Rate
(l/m) handwash*
Standing Loss
(kWh/day)
IN96T
Yes
0.0
9.6
Handwash or Shower
5.2
Dishwash
3.6
*Flow rates based on incoming water supply temperature of 12°C, hand wash or shower
at 38°C, dish wash at 50°C
Water Heating
Outer Casing
Easy clean high impact ABS
Heating Element
Bare-wire heating system
(2 nickel chrome heating elements)
Memory – save selected
temperature.
Touch screen arrow keys allow
the user to set the required
temperature.
Touch screen power on/off control.
The temperature display will flash
if the set temperature cannot
be reached.
Flow Dial
Increase/decrease maximum
water flow rate.
Safety
Overheat temperature protection
75°C (manual reset).
Water temperature electronically
controlled to maintain user
selected temperature between
30°C and 60°C as water pressure
conditions vary.
Plumbing
Must be installed by
a suitably qualified person.
Minimum flow rate 2.5 l/m.
Minimum water pressure 1 bar.
Maximum water pressure 7.5 bar.
Water resistivity ≥ 1300 Ωcm.
Water Connection
Inlet/Outlet 2 x 1/2” BSP male
(100mm apart centre to centre).
Fittings required (not supplied):
2 x 15mm compression to 1/2”
BSP female adapter.
Suitable for use with pre-heated
water e.g. solar heating systems
subject to maximum inlet water
temperature 60°C.
Electrical Connection
Installation must comply
with current IEE regulations.
Single phase, fuse rating guide
42 amps. The product should
be connected to the fixed wiring
of the property via suitably rated
isolating switch with a contact
separation of at least 3mm
in all poles.
IP Rating
IPX4
Approvals
CE, WRAS
Installation
This appliance must be installed
in a frost free environment.
Standard Warranty
1 year parts or replacement
warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty
IN96T
380
230
90
2.02
p. 47
Control Screen (from left to right)
Temperature display (°C)
Actual flow rate display (l/m)
Heating power display (%)
The heater should be located
as close as practical to the hot
water outlet to avoid unnecessary
heat losses through the pipework.
Water Heating
Instantaneous Inline
Water Heater
Temperature Performance Charts
Delivered Temperature (°C)
Incoming Water Supply Temp 17°C
Water Flow Rate (l/m)
p. 48
Delivered Temperature (°C)
Incoming Water Supply Temp 12°C
Water Flow Rate (l/m)
Delivered Temperature (°C)
Incoming Water Supply Temp 7°C
Water Flow Rate (l/m)
Handwash or shower at 38°C
Kitchen sink at 50°C
Max Temp 48°C Min flow rate
2.0 l/m (IN44T and IN60T)
Max Temp 60°C Min flow rate
2.5 l/m (IN96T)
Water Heating
Selection Guide
Check the flow rate and water temperature will be adequate
for your application using the chart and tables provided.
Take into account that the incoming water supply temperature
will be lower in winter than summer.
Temperature Rise
Temperature rise from ambient for an instantaneous water heater (TR)
TR = kW rating x 14.3 / flow rate l/m
Temperature/Flow Rate
Maximum temperature increase from ambient incoming water supply
temperature at a flow rate of:
IN44T
IN60T
2.0
31°C
43°C
2.5
25°C
34°C
3.0
21°C
28.5°C
IN96T
45°C
4.0
34°C
5.0
27°C
Application
Recommended temperature for hand washing or shower 38°C.
Recommended temperature for a kitchen sink 50°C.
Rho and Aquila Instantaneous water heaters are intended for use with
spray head taps with removable M22/M24 nozzles. A tap spray nozzle
must be fitted in the tap to control the water flow rate and to provide
best performance and energy and water efficiency.
Product Code Power
(kW)
Application
Water Flow Rate
for best performance
(l/m)
IN44T
4.4
Handwashing at a single sink
2.0
IN60T
6.0
Handwashing at a single sink
2.5
IN96T
9.6
Handwashing at up
to 2 basins or
Light dishwashing at
a single sink or
Light shower
2.0 per basin
3.0 per sink
4.0 - 4.5
p. 49
Flow Rate
(l/m)
Water Heating
Taps
Non-Concussive, Single Level Mixer
Automatic Infrared
Usage
This range of taps is ideal for use with Hyco Rho and Aquila
instantaneous water heaters to provide optimum handwashing
performance in washroom settings and for use with Hyco
Speedflow and Powerflow water heaters.
p. 50
Features and Benefits
•Sprayhead range of taps all with
removable M22/M24 nozzles
•Reduce water consumption by up
to 50% compared to traditional
taps by controlling the flow rate
•Save energy by up to 50%
compared to traditional taps
by reducing the amount of hot
water required per handwash
• Where the taps are used with
a Speedflow or Powerflow water
heater an optional thermostatic
mixing valve is recommended
(see page 40)
•Hyco Rho and Aquila
instantaneous water heaters
are only intended for use with
spray head taps of this type.
If traditional taps which do not
control the water flow rate are
used then optimum performance
will not be achieved.
•All taps supplied complete
with a choice of three tap spray nozzles – 2.0, 2.5
or 3.0 l/m
• Other flow rates available
on request
Product Code
Description
Reach
(mm)
TAPNC
Non-concussive tap
150
TAPSLM
Single lever
mixer tap
160
TAPIFR
Automatic touch
free tap
150
Tap Spray Nozzle Options
Product Code
Max Flow Rate
(l/m)
Best suited
to water heater
Colour Code
Identification
IN-TSN-2.0
2.0
4.4 kW Rho
White/Black
IN-TSN-2.5
2.5
6.0 kW Rho
White/Green
IN-TSN-3.0
3.0
9.6 kW Aquila
White/Lilac
Water Heating
Non-Concussive Tap
Simple ‘push tap’ operation.
Tap functions for a period of time
and then closes automatically.
Prevents vandalism and continuous
running and saves water.
Use for hot or cold water – blue
and red identification rings
supplied with each tap.
WRAS approved
p. 51
Single Lever Mixer Tap
Simple manual operation by lifting
the control lever up and down.
Rotating the control lever
clockwise or anti-clockwise
reduces or increases the mixed
water temperature.
Automatic Infrared (Touch Free) Tap
Hygienic no touch
automatic operation.
Dual mains or battery
powered operation.
Complete with cable for
connection to the power supply.
Usage timer prevents vandalism
and continuous running
and saves water.
Mixer lever gives option
to dispense hot and cold
water if required.
WRAS approved
Standard Warranty
1 year parts or replacement
warranty for all tap models.
Product Code
Height
(mm)
Diameter
(mm)
Reach
(mm)
Weight
(kg)
TAPNC
140
50
150
0.8
TAPSLM
160
50
160
1.0
TAPIFR
140
50
150
1.7
Water Heating
Wave
Instantaneous Hand Wash
3.0 kW, Manual and Automatic
Usage
Designed for light handwashing at a single basin.
p. 52
Features and Benefits
Manual Unit
•Unlimited hot water for light
hand washing at a single
washroom basin
• Designed and assembled
in the UK
• Stylish and compact
ergonomic design
•Energy efficient – heats water
instantly at point of use so
no long pipe runs and no
standing heat losses
• 3.0 kW element
•Cost effective hot water
for handwashing
• Integral inlet tap and swivel
200mm spray arm
•Optimised spray head
to prevent splashing
• Durable easy to clean cover
• Simple to install and use
•Separate on/off and temperature and flow rate control
•No need to re-calibrate flow
rate every usage
•Correct temperature instantly
achieved every time
Automatic Unit
•Automatic no touch
operation
•Manual temperature
and flow rate control
Product Code
Power
(kW)
On/ Off
Control
Max Flow Rate
Standing Loss
(l/m) Handwash* (kWh/day)
HW30M
3.0
Manual
1.6
0.0
HW30A
3.0
Auto
1.6
0.0
*Flow rate based on incoming water supply temperature of 12°C, handwash at 38°C
Water Heating
Outer Casing
Easy clean, high impact
Polycarbonate/ABS
Wall mounted. Base assembly
is secured to the wall by two fixing
screws. Full fixing pack supplied.
Heating Element
Copper-sheathed coil
Plumbing
Must be installed by a suitably
qualified person.
Minimum water pressure 1.0 bar.
Maximum water pressure 6.0 bar.
Controls
On/Off:
HW30M Rotary switch
HW30A Automatic
no touch operation
Water Connection
Inlet 1 x 15mm compression.
Outlet 1 x Push fit chrome plated
brass spray arm 200mm (8”).
Temperature Selection:
HW30M and HW30A Rotary dial
Safety
Self re-setting thermal
cut-out set at 60°C.
ONLY USE THE FITTINGS
SUPPLIED SO THAT THE UNIT
IS NOT PRESSURISED.
Fittings required
(not supplied): none.
Manual resettable cut-out
set at 90°C.
Pressure relief valve to prevent
high-pressure build up.
Temperature stabilised – unit
maintains consistent outlet
temperature as water pressure
conditions vary.
Electrical Connection
Installation must comply
with current IEE regulations.
This product should be connected
to the fixed wiring of the property
via a double pole fused spur with
a minimum break capacity
of 13 amps.
Approvals
CE, WRAS
IP Rating
IPX4
Installation
The appliance must be installed
in a frost free environment.
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height*
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty
HW30M
170
240
100
1.5
HW30A
170
240
100
1.5
*Dimensions excluding spout.
p. 53
Water Container
Glass reinforced nylon
Water Heating
Handyflow Oversink
Vented Point of Use
Water Heater
5 litre
p. 54
Usage
Ideal for occasional use light dishwashing at a single kitchen sink
in the workplace, for example portable buildings, offices, shops,
workshops, garages and other small commercial premises.
Features and Benefits
•Open outlet heater to supply
hot water to a single sink
•Ideal when economy and ease
of installation are the key priorities
•Stylish design and slimline
profile – depth only 7” (180mm)
•Comes complete with tap
and chrome spout
•Thermal cut-out can be re-set
rather than requiring
to be replaced
•2.0 kW element
•External temperature control
with frost protection setting
• Neon element on indicator
• Wall fixing bracket included
and cable pre-wired (1m)
– saves time on installation
• No need for expansion vessel, relief valve or reducing valve
Product Code
Capacity
(litres)
Power
(kW)
Heat Up Time
(mins)*
Standing Loss
(kWh/day)
HF05LM
5
2.0
12
0.32
*Heat up time from 10°C to 75°C
Water Heating
Outer Casing
Easy clean, high impact plastic
Heating Element
Copper-sheathed type element
Minimum water pressure 0.3 bar.
Maximum water pressure 8.0 bar.
Water Connection
Inlet valve/tap 1 x 15mm
compression.
Outlet 1 x chrome plated brass
spray arm.
Fittings required
(not supplied): none.
Water Tank
Polypropylene
Insulation
High density polystyrene
CFC free
ONLY USE THE FITTINGS
SUPPLIED SO THAT THE UNIT
IS NOT PRESSURISED.
Spout
Length 10” (250mm)
Safety
Open outlet non-pressurised
system, supplied tap and spout
must be used.
Safety re-settable thermal cut out.
Frost protection setting when
power is switched on.
Heating Cycle
It is normal for the spout on this
type of unit to drip slightly during
the heating cycle, caused by the
water expanding as it heats up.
IP Rating
IP24
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (1m).
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Installation
Must be sited above a sink using
the wall fixing bracket supplied,
with the spout and tap located
at the bottom of the unit.
Product Code
HF05LM
Height
(mm)
Width
(mm)
Depth
(mm)
Empty Full
400
270
180
3.5
Weight (kg)
8.2
p. 55
Thermostat
Capillary type adjustable
to approx. 80°C
E setting approx. 55°C
Plumbing
Must be installed by a suitably
qualified person.
Water Heating
Handyflow Undersink
Vented Point of Use
Water Heater
5 litres
p. 56
Usage
Ideal for occasional use light dishwashing at a single kitchen sink
in the workplace, for example portable buildings, offices, shops,
workshops, garages and other small commercial premises.
Features and Benefits
•Open outlet heater to supply
hot water to a single sink
•Ideal when economy and ease
of installation are the key priorities
•Stylish design and slimline
profile – depth only 7” (180mm)
•Can be installed in an
under-sink cupboard giving
less visual impact than
the Handyflow Oversink
•Comes complete with vented
mixer tap and hoses
•Thermal cut-out can be
re-set rather than requiring
to be replaced
• 2.0 kW element
• External temperature control with frost protection setting
• Neon element on indicator
•Cable pre-wired (1m)
– saves time on installation
•No need for expansion vessel,
relief valve or reducing valve
Product Code
Capacity
(litres)
Power
(kW)
Heat Up Time
(mins)*
Standing Loss
(kWh/day)
HF05MVC
5
2.0
12
0.32
*Heat up time from 10°C to 75°C
Water Heating
Outer Casing
Easy clean, high impact plastic
Installation
Must be sited below a sink, with
the inlet and outlet connections
at the top of the unit.
Heating Element
Incoloy-sheathed coil
Plumbing
Must be installed by a suitably
qualified person.
Thermostat
Capillary type adjustable
to approx. 80°C
E setting approx. 55°C
Minimum water pressure 0.5 bar.
Maximum water pressure 8.0 bar.
Water Tank
Polypropylene
Insulation
High density polystyrene
CFC free
Safety
Open outlet non-pressurised
system, vented mixer tap must
be used.
ONLY USE THE FITTINGS
SUPPLIED SO THAT THE UNIT
IS NOT PRESSURISED.
Safety re-settable thermal cut out.
Frost protection setting when
power is switched on.
Electrical Connection
Installation must comply
with current IEE regulations.
Heating Cycle
It is normal for the vented tap
on this type of unit to drip slightly
during the heating cycle, caused by
the water expanding as it heats up.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
IP Rating
IP24
Cable pre-wired (1m).
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight (kg)
Empty Full
HF05VC
400
270
180
3.5
8.2
p. 57
Water Connection
Cold water connection 1 x 15mm
compression.
Outlet 1 x vented tap (supplied).
Fittings required
(not supplied): none.
p. 58
Product Category
Hand Dryers
and Hair Dryers
p. 59
Hand Dryers
Jetstream Blade
1.9 kW Automatic Hand Dryer
Energy Efficient
p. 60
Usage
Suitable for many public washroom applications including
restaurants, shops and shopping centres, office buildings,
pubs, motorway services, factories and supermarkets.
Features and Benefits
• High speed giving fast
drying times
• Saves energy relative
to traditional hand dryers
from reduced drying times
• Modern stylish design
• Automatic double side blades
•Hygienic automatic
operation reduces the risk
of spreading germs
•2 power output settings 800
and 1900 W provide a low power rating option to increase energy efficiency
•‘Auto heating’ setting allows
energy saving by automatically
switching off the element if the
ambient temperature is above
25°C (automatic/all time heating)
•Blue Dry Zone LED indicator
gives visible indication to
ensure hands are placed
in the warm air stream
•Dust filter and drip tray
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
JETB190W
White
1.9
70
90
10
Hand Dryers
Outer Casing
Easy clean high impact ABS
Heating Element
1100 W (on/off setting)
LED Display
The hand dryer will display
the current temperature of the
room when in standby mode.
Motor
800 W
Carbon Brush
25,000 RPM
When operated a 10 second
countdown will be displayed.
Current
8 amps
Electrical Connection
Installation must comply
with current IEE Regulations.
Air Speed
90 m/s
Operation
Touch free automatic.
Cable pre-wired (1.2m).
Safety
Overheat temperature protection.
Safety timer prevents continuous
running.
IP Rating
IPX1
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
JETB190W
687
300
225
10.8
p. 61
Installation
Full fixing pack supplied.
Cable entry to the left
of the unit.
Hand Dryers
Jetstream Ellipse
1.6 kW Automatic Hand Dryer
Energy Efficient
p. 62
Usage
Suitable for many public washroom applications including
restaurants, shops and shopping centres, office buildings,
pubs, motorway services, factories and supermarkets.
Features and Benefits
•High speed giving fast
hand drying times
•Saves energy relative
to traditional hand dryers
from reduced drying times
• Modern stylish design
•Hygienic automatic
operation reduces the risk
of spreading germs
• 1.6 kW power rating
•Option to reduce power rating
to 0.8 kW on installation
to increase energy efficiency
• Dry Zone LED indicator gives
visible indication to ensure
hands are placed in the
warm air stream
•Dual colour LED sensor indicator
(green: on, red: off)
•Durable metal vandal
resistant case
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
JET1600
White
1.6
77
10 - 15
100
JET1600BSS
Brushed SS 1.6
77
10 - 15
100
Hand Dryers
Outer Casing
JET1600 – white enamel steel
JET1600BSS – brushed stainless
steel
Installation
Full fixing pack supplied.
Cable entry to the left
at the base of the unit.
Heating Element
450 – 900 W (adjustable)
Electrical Connection
Installation must comply
with current IEE Regulations.
Current
7 amps
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Class I
Air Speed
75 – 100 m/s (adjustable)
Approvals
CE
Air Volume
87 – 116 m3/h (adjustable)
Standard Warranty
1 year parts or
replacement warranty.
Operation
Touch free automatic.
Safety
Overheat temperature protection.
Safety timer prevents continuous
running.
IP Rating
IPX1
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
JET1600
287
205
180
5.8
JET1600BSS
287
205
180
5.8
p. 63
Motor
350 – 700 W (adjustable)
Carbon Brush
12,000 – 18,000 RPM (adjustable)
Hand Dryers
Jetstream Curve
1.8 kW Automatic Hand Dryer
Usage
p. 64
Suitable for many public washroom applications including
restaurants, shops and shopping centres, office buildings,
pubs, motorway services, factories and supermarkets.
Features and Benefits
•High speed giving fast
hand drying times
• Saves energy relative
to traditional hand dryers
from reduced drying times
• Modern stylish 'curve' design
•Hygienic automatic
operation reduces the risk
of spreading germs
• 1 power output setting 1.8 kW
• Blue Dry Zone LED indicator
gives visible indication
to ensure hands are placed
in the warm air stream
• Stainless steel case
• Available in white, silver
or brushed stainless steel finish
• Easy clean, vandal resistant, durable casing
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
JETC18W
White
1.8
78
10 - 15
80
JETC18S
Silver
1.8
78
10 - 15
80
JETC18BSS
Brushed SS 1.8
78
10 - 15
80
Hand Dryers
Outer Casing
Stainless steel
Installation
Full fixing pack supplied.
Cable entry bottom left
at the base of the unit.
Heating Element
1200 W
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Current
8 amps
Air Speed
80 m/s
Cable (1m) supplied not fitted.
Class I
Operation
Touch free automatic.
Safety
Overheat temperature protection.
Safety timer prevents
continuous running.
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
IP Rating
IPX1
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
JETC18W
325
280
170
5.4
JETC18S
325
280
170
5.4
JETC18BSS
325
280
170
5.4
p. 65
Electrical Connection
Installation must comply
with current IEE Regulations.
Motor
600 W
Carbon brush
Dual ball bearings
20,000 RPM
Hand Dryers
Jetstream Slimline
1.0 kW Automatic Hand Dryer
Energy Efficient
p. 66
Usage
Suitable for many public washroom applications including
restaurants, shops and shopping centres, office buildings, pubs,
motorway services, factories and supermarkets. The slimline
profile makes this hand dryer particularly suitable for restricted
space applications such as portable buildings.
Features and Benefits
•High speed giving fast
hand drying times
• Saves energy relative
to traditional hand dryers
from reduced drying times
•Modern compact design
with slimline profile
– depth only 100mm (4”)
•Hygienic automatic
operation reduces the
risk of spreading germs
•Low 1.0 kW power rating
•Option to reduce power rating
to 0.35 kW on installation
to increase energy efficiency
•Durable white steel vandal
resistant case
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
JETS10W
White
1.0
78
70
10 - 15
Hand Dryers
Outer Casing
White epoxy on steel
Installation
Full fixing pack supplied.
Cable entry bottom left
at base of the unit.
Heating Element
325 – 500 W (adjustable)
and on/off function both
set on installation
Electrical Connection
Installation must comply
with current IEE Regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Current
4.3 amps
Class I
Approvals
CE
Air Speed
45 – 70 m/s (adjustable)
Standard Warranty
1 year parts or
replacement warranty.
Air Volume
71 – 102 m3/h (adjustable)
Operation
Touch free automatic.
Safety
Overheat temperature protection.
Safety timer prevents continuous
running.
IP Rating
IP23
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
JETS10W
216
276
100
3.8
p. 67
Motor
350 – 500 W (adjustable)
set on installation
Carbon brush
Dual Ball bearings
29,000 RPM
Hand Dryers
Jetstream Arc
1.1 kW Automatic Hand Dryer
Energy Efficient
p. 68
Usage
Suitable for many public washroom applications including
restaurants, shops and shopping centres, office buildings,
pubs, motorway services, factories and supermarkets.
Features and Benefits
• Exceptional value for money
• High speed giving fast hand drying times
•Saves energy relative
to traditional hand dryers
from reduced drying times
• Modern stylish design
•Hygienic automatic
operation reduces the risk
of spreading germs
• Low 1.1 kW power rating
• Option to reduce power rating to 0.65 kW by switching off the
heating element to increase
energy efficiency
•Durable, easy clean,
white ABS case
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
JET11W
White
1.1
72
90
10 - 15
Hand Dryers
Outer Casing
White ABS casing
Installation
Full fixing pack supplied.
Cable entry bottom right
at the base of the unit.
Heating Element
450 W (on/off setting)
Electrical Connection
Installation must comply
with current IEE Regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Current
5 amps
Air Speed
90 m/s
Class II
Operation
Touch free automatic.
Approvals
CE
Safety
Overheat temperature protection.
Standard Warranty
1 year parts or
replacement warranty.
Safety timer prevents
continuous running.
IP Rating
IPX1
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
JET11W
260
250
180
3.2
p. 69
Motor
650 W
Carbon brush
24,000 – 27,000 RPM
Hand Dryers
Tornado
2.3 or 2.5 kW Automatic Hand Dryer
Traditional, Hand and Face
Usage
Suitable for many public washroom applications including
restaurants, shops and shopping centres, office buildings,
pubs, motorway services, factories and supermarkets.
p. 70
Features and Benefits
• Traditional high powered
hand dryer
•Hygienic automatic
operation reduces the risk
of spreading germs
•Easy clean stainless steel
vandal resistant case
• Classic look
•Well suited to high
traffic situations
•The chrome nozzle can
be rotated for hand and
face drying
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
TOR23W
White
2.3
75
20
30
TOR23BSS
Brushed SS 2.3
75
20
30
TOR25W
White
2.5
75
20
30
TOR25BSS
Brushed SS 2.5
75
20
30
Hand Dryers
Outer Casing
Stainless steel
Installation
Full fixing pack supplied.
Cable entry bottom left
at the base of the unit.
Heating Element
1800 W
Electrical Connection
Installation must comply
with current IEE Regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Current
10 amps
Operation
Touch free automatic.
Class I
Safety
Overheat temperature
protection.
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Safety timer prevents
continuous running.
IP Rating
IPX1
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
TOR23W
235
275
210
4.4
TOR23BSS
235
275
210
4.4
TOR25W
235
275
210
5.7
TOR25BSS
235
275
210
5.7
p. 71
Motor
500 W
Carbon brush
7,500 RPM
Hand Dryers
Cyclone
1.6 kW Automatic Hand Dryer
Traditional
p. 72
Usage
Suitable for a wide number of applications including schools,
offices, restaurants and shops.
Features and Benefits
• Traditional style hand dryer
•Low air speed makes the hand
dryer suitable for young
school children
• Stylish design in ivory white
• 1.6 kW power rating
• Metal vandal resistant case
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
HD1600
Ivory
1.6
73
12
White
30
Hand Dryers
Outer Casing
White metal case
Installation
Full fixing pack supplied.
Cable entry bottom right
at the base of the unit.
Heating Element
1500 W
Electrical Connection
Installation must comply
with current IEE Regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Current
7 amps
Air Speed
12 m/s
Cable pre-wired (1m).
Air Volume
181 m3/h
Class I
Approvals
CE
Operation
Touch free automatic.
Standard Warranty
1 year parts or
replacement warranty.
Safety
Overheat temperature
protection.
Safety timer prevents
continuous running.
IP Rating
IPX1
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
HD1600
206
268
150
3.5
p. 73
Motor
100 W
Carbon brush
2850 RPM
Hand Dryers
Hurricane
1.8 kW Automatic Hand Dryer
Traditional
p. 74
Usage
Suitable for a wide number of applications including schools,
offices, restaurants and shops.
Features and Benefits
•Traditional high
powered hand dryer
•Low air speed makes the hand
dryer suitable for young
school children
• Stylish design in ivory white
•Hygienic automatic
operation reduces the risk
of spreading germs
• 1.8 kW power rating
• Metal vandal resistant case
Product Code
Finish
Power
(kW)
Sound Level Dry Time
(dB)
(seconds)
Air Speed
(m/s)
HD1800
Ivory
1.8
73
18
White
25
Hand Dryers
Outer Casing
Die cast aluminium
Enamel coated
Installation
Full fixing pack supplied.
Cable entry bottom right
at the base of the unit.
Heating Element
1600 W
Electrical Connection
Installation must comply
with current IEE Regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Current
8 amps
Air Speed
18 m/s
Cable pre-wired (1m).
Class I
Air Volume
147 m3/h
Approvals
CE
Operation
Touch free automatic.
Standard Warranty
1 year parts or
replacement warranty.
Safety
Overheat temperature
protection.
Safety timer prevents
continuous running.
IP Rating
IPX1
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
HD1800
263
245
195
3.4
p. 75
Motor
200 W
Carbon brush
5600 RPM
Hair Dryers
Topaz
1.5 kW Digital Hair Dryer
p. 76
Usage
Designed for hotels and similar light commercial applications.
Not suitable for heavy usage applications such as public
swimming baths and sports facilities.
Features and Benefits
•Automatic hair dryer switching
on when the handgrip is removed
from the holder
•Ideal for hotel room en-suites
where vandalism is unlikely
•Five selectable heat settings,
60°C default air temperature
Constant temperature between 40°C and 80°C
• LCD display screen
• Extendable hose (up to 1.5m)
• Incorporates shaver socket
• IP24 splashproof
• Wall mounted
Product Code
Finish
Power
(kW)
Heat Settings
Air Volume
(m3/h)
HD15015
White
1.5
5
87
Hair Dryers
Outer Casing
White ABS
Installation
Supplied with fixing brackets
which must be used.
Site according to the IP rating.
Electrical Connection
Installation must comply
with current IEE regulations.
Controls
Temperature display (°C)
with default setting 60°C.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
+/- controls allow the user
to change the temperature.
Unit automatically shuts off
if left unattended.
Cable pre-wired (1.25m), entry
in the middle of the base
of the unit.
Current
6.5 amps
Approvals
CE
Air Speed
17 m/s
Safety
Overheat temperature protection.
Standard Warranty
1 year parts or
replacement warranty.
Safety timer prevents continuous
running (18 minutes).
IP Rating
IP24
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
Excluding Hose
270
205
110
2.3
Including Hose
580
205
110
2.3
p. 77
Operation
The hair dryer will start
automatically when the nozzle
is removed from the base and
stop when it is replaced.
Hair Dryers
Opal
1.4 kW Holster Style Hair Dryer
p. 78
Usage
Designed for hotels and similar light commercial applications.
Not suitable for heavy usage applications such as public
swimming baths and sports facilities.
Features and Benefits
• Automatic hair dryer
•Ideal for hotel rooms where
vandalism is unlikely
•Spring loaded start switch
protects the dryer from
unintended operation
•Three heat settings, 0.5, 1.0
and 1.4 kW
• Extendable lead (up to 1.4m)
• Wall mounted
Product Code
Finish
Power
(kW)
Heat Settings
Air Volume
(m3/h)
HD190I
White
1.4
1
96
Hair Dryers
Outer Casing
White ABS
Sound Level
60 dB
Spring loaded start switch prevents
unintended operation.
IP Rating
IPX0
Installation
Supplied with fixing brackets
which must be used.
Site according to the IP rating.
Electrical Connection
Installation must comply with
current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (0.6m), entry
in the middle of the base
of the unit.
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
HD190I
320
250
150
2.3
p. 79
Safety
Overheat temperature protection.
Hair Dryers
Jade
0.7 kW Traditional Hair Dryer
p. 80
Usage
Designed for hotels and similar light commercial applications.
Not suitable for heavy usage applications such as public
swimming baths and sports facilities.
Features and Benefits
•Automatic hair dryer
switching on when the handgrip is removed
from the holder
• Ideal for hotel room
en-suites where vandalism is unlikely
• One heat setting
• Extendable hose
(up to 1.4m)
• Incorporates shaver socket
• Wall mounted
Product Code
Finish
Power
(kW)
Heat Settings
Air Volume
(m3/h)
HD700
White
0.7
1
43
Hair Dryers
Outer Casing
White ABS
Installation
Supplied with fixing brackets
which must be used.
Site according to the IP rating.
Electrical Connection
Installation must comply
with current IEE regulations.
Current
3 amps
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Air Speed
14 m/s
Sound Level
75 dB
Safety
Overheat temperature protection.
Safety timer prevents continuous
running (12 minutes).
IP Rating
IP21
Cable pre-wired (1.35m), entry
at the top left of the unit.
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
Excluding Hose
297
200
90
2.2
Including Hose
600
200
90
2.2
p. 81
Operation
The hair dryer will start
automatically when the nozzle
is removed from the base and
stop when it is replaced.
p. 82
Product Category
Space Heating
p. 83
Space Heating
Accona
Panel Heater
0.5, 1.0, 1.5 and 2.0 kW
p. 84
Usage
Ideal for a wide range of fixed installation heating applications
in the home and office environment.
Features and Benefits
Timer Model Features
• Stylish curved design
panel heaters
• Available in 0.5, 1.0, 1.5
and 2.0 kW
• 7 day LCD timer and standard non-timer models available (0.5 kW model timer only)
• Element on neon indicator
• Wall mounted – secure bracket included
•7 day LCD electronic timer
– choose from pre-set schedules
or create your own
•2 user set temperature settings:
peak for whilst the room is
occupied and off peak (typically
night or frost protection)
• Peak temperature range
21 - 30°C, off peak temperature range 5 - 17°C
• Time delayed start up
and shut down
• Integrated child lock
Standard Model Features
• Mechanical thermostat and power on/off switch
Product Code
Power
(kW)
Timer
Current
(amps)
AN500T
0.5
Yes
2.2
AN1000
AN1000T
1.0
No
Yes
4.3
AN1500
AN1500T
1.5
No
Yes
6.5
AN2000
AN2000T
2.0
No
Yes
9
Space Heating
Outer Casing
Metal
Installation
Wall mounting kit included
and must be used.
Controls
Standard model
– adjustable thermostat
and on/off switch.
Timer model
– digital controls and screen.
Electrical Connection
Installation must comply
with current IEE regulations.
2.0 kW model has three columns
of louvres.
Cable pre-wired (1.5m), white cable,
entry to the top right of the unit.
Safety
Overheat temperature protection.
Class I
IP Rating
IPX0
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
AN500T
440
444
98
4.4
AN1000
AN1000T
440
580
98
5.1
AN1500
AN1500T
440
700
98
6.2
AN2000
AN2000T
440
855
98
7.4
p. 85
Louvres
0.5, 1.0 and 1.5 kW models
have two columns of louvres.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Space Heating
Scirocco
Convector Heater
2.0 kW
p. 86
Usage
Ideal for a wide range of fixed installation or portable heating
applications in the home and office environment.
Features and Benefits
• Floor standing or wall mountable
• Timer version includes
a 24 hour segment timer
• Neon element on indicator
• Wall mounting kit and
feet provided
•Thermostat
• 3 heat settings
(0.75, 1.25 and 2.0 kW)
• Non-timer model available
in 2 sizes, Y-classic
and YM-modern
Product Code
Power
(kW)
Model
Timer
Current
(amps)
SC2000Y
2.0
Classic
No
9
SC2000YM
2.0
Modern
No
9
SC2000YST
2.0
Classic
Yes
9
Space Heating
Outer Casing
Metal
Installation
Wall mounting kit included.
Feet included for optional floor
mounting.
Timer model only:
24 hour segment timer,
15 minute interval time slots.
Switch to select on all the time
or timed operation.
Push segments out for the time
interval heater is to be timed on.
Push segments in for the time
interval heater is to be timed off.
Electrical Connection
Cable pre-wired (1.5m), white cable
entry to the bottom left of the unit
with a BS plug.
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Safety
Overheat temperature protection.
IP Rating
IPX0
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
SC2000Y
370
580
110
3.0
SC2000YM
335
530
110
3.0
SC2000YST
370
580
110
3.0
*Dimensions excluding feet. Including feet add 55mm to height and 40mm to depth
p. 87
Controls
All models:
adjustable thermostat
and on/off switch.
Power setting switches.
Space Heating
Maestro
Air Curtain
3.0 kW
p. 88
Usage
Over door fan heater designed for installation above doorways
to reduce heat loss from buildings such as shops, restaurants
and offices.
Features and Benefits
• Stylish design over door
fan heater
• 3 heat settings 1.5 and 3.0 kW, and fan only option
• Easy to install, with a robust
fast fitting wall bracket
• Cable pre-wired
• Wall or ceiling mounted
• Neon power on indicator
Product Code
Power
(kW)
Timer
Current
(amps)
MAC3X
3.0
No
13
Space Heating
Outer Casing
Powder coated steel
Controls
Power/fan on/off switch.
Two temperature setting switches.
Airflow
254 m3/h
Sound Level
60 dB
IP Rating
IPX0
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a suitably rated isolating
switch with a contact separation
of at least 3mm in all poles.
Cable pre-wired (1.5m),
entry to the back of the unit
located centrally.
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
MAC3X
205
630
105
5.2
p. 89
Safety
Overheat temperature protection.
Installation
Wall mounting kit included
for wall or ceiling mounting.
Space Heating
Novara
PTC High Level Heater
2.0 kW
p. 90
Usage
This heater is typically used in commercial settings and is ideal
for a wide range of fixed installation heating applications.
Features and Benefits
• High level heater with positive
temperature coefficient
(PTC) element
• Fan assisted heating
•3 heat settings
– cool, 1.0 and 2.0 kW
•Manual or remote
control operation
•Remote control included
(requires 2 x AAA batteries
not included)
• Run on timer
• Neon power on indicator
•LED display indicating selected
power and timer settings
• Wall mounting kit included
Product Code
Power
(kW)
Timer
Current
(amps)
NV2000
2.0
Yes
9
Space Heating
Outer Casing
ABS
Installation
Wall mounting kit included,
1.8m minimum height restriction.
Controls
Power on/off switch.
Electrical Connection
Installation must comply
with current IEE regulations.
Timer selection switch.
Timer runs for up to 7.5 hours
in 0.5 hour intervals.
Safety
Overheat temperature protection.
Cable pre-wired (1.5m),
black cable, entry to the
top right of the unit.
Class II
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
NV2000
200
515
120
2.3
p. 91
IP Rating
IPX0
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Space Heating
Mistral
Bathroom Fan Heater
1.8 kW
p. 92
Usage
Designed to cope with humidity and ideal for occasional
heating of bathrooms.
Features and Benefits
• Stylish slimline design bathroom, fan heater
•Splashproof
• Element on neon indicator
•Thermostat
• Cable pre-wired
• Wall mounted – fittings included
• Removable and washable dust
air filters
Product Code
Power
(kW)
Timer
Current
(amps)
MS180
1.8
No
8
Space Heating
Outer Casing
Metal front plate and louvres
with plastic back plate.
Installation
Wall mounting kit included.
Electrical Connection
Installation must comply
with current IEE regulations.
Controls
Thermostat control knob
IP Rating
IP24
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (1.5m),
entry to the back of the unit,
located to the right.
Class II
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
MS180
410
285
115
2.8
p. 93
Safety
Overheat temperature protection.
Space Heating
Zephyr
Downflow Fan Heater
High Level
2.0 kW
p. 94
Usage
Ideal for providing occasional heating in small spaces
such as bathrooms, kitchens and en suites.
Features and Benefits
• Practical downflow fan heater
• Pull cord operation
• Element on neon indicator
• Wall mounted
•2 power levels 1.0 and 2.0 kW
– set at installation
•In 2.0 kW mode thermostat
reduces output to 1.0 kW when the room is warm and steps
back up to 2.0 kW when required
• Internal thermostat
– set at installation
• Minimum installation
height 1.8m from the floor
Product Code
Power
(kW)
Timer
Current
(amps)
DF20
2.0
No
9
Space Heating
Outer Casing
ABS
Installation
Wall mounting kit included
and must be used.
Controls
Pull cord on/off operation.
Neon indicator to show
when in operation.
Power level selection
and thermostat under
the main cover.
The unit has to be fitted
at least 1.8m from the floor.
Safety
Overheat temperature protection.
IP Rating
IP21
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (0.9m),
white cable, entry to the
bottom right of the unit.
Class II
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
DF20
240
235
125
1.4
p. 95
Electrical Connection
Installation must comply
with current IEE regulations.
Space Heating
Arezzo
Downflow Fan Heater
Low Level
2.0 kW
p. 96
Usage
Ideal for providing occasional heating in small spaces
such as bathrooms, kitchens and en suites.
Features and Benefits
•Practical design
downflow fan heater
• External thermostat
• Element on neon indicator
• Wall mounted
• 3 power levels fan only,
1.0 and 2.0 kW
– adjustable by a control
to the front of the unit
• Power on/off control
on the front of the unit
• Maximum installation height 1.8m from the floor
Product Code
Power
(kW)
Timer
Current
(amps)
DF20LL
2.0
No
9
Space Heating
Outer Casing
ABS
Installation
Wall mounting kit included
and must be used.
Controls
Adjustable on/off
thermostatic control.
Must be fitted no higher
than 1.8m from the floor.
Adjustable power level
control knob.
Safety
Overheat safety protection.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
IP Rating
IP23
Cable pre-wired (1.4m),
white cable, entry to the
bottom right of the unit.
Class II
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
DF20LL
245
240
130
1.6
p. 97
Electrical Connection
Installation must comply
with current IEE regulations.
Space Heating
Aztec
Industrial Fan Heater
2.0 kW
p. 98
Usage
Portable heater for industrial buildings, workshops or use
in a garage. Ideal for drying out newly plastered walls or as
a source of heat for builders and trades people working indoors
on new builds or refurbishment work.
Features and Benefits
• Thermostatically controlled
portable fan heater
• Heavy duty steel element
• Robust heavy duty construction
• 2.0 kW output
• 3 heat settings
(1.0 kW/ 2.0 kW/ fan only)
• Integrated carry handle
Product Code
Power
(kW)
Timer
Current
(amps)
IFH2000
2.0
No
9
Space Heating
Outer Casing
Stainless steel metal case
and metal stand.
Electrical Connection
Supplied with a pre-wired
(1.45m) black flex BS plug,
cable entry to the right
of the heater.
Controls
Function switch including
off, cool blow, half heat and
full heat output.
Class I
Safety
Overheat temperature protection.
IP Rating
IPX4
p. 99
Approvals
CE
Thermostat dial.
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
IFH2000
293
245
225
8.1
Space Heating
Fiji
Fan Heater
2.0 kW
p. 100
Usage
Portable heater for home and office use.
Features and Benefits
• Thermostatically controlled portable fan heater
• Stylish letterbox design
• 2.0 kW output
• 3 heat settings
(1.0 kW/ 2.0 kW/ fan only)
• Neon element on indicator
• Overheat protection
Product Code
Power
(kW)
Timer
Current
(amps)
FH-201Z
2.0
No
9
Space Heating
Outer Casing
Durable easy clean ABS
Electrical Connection
Supplied with a pre-wired
(1.35m) white flex BS plug,
cable entry to the back centre
of the heater.
Controls
Function switch including
off, cool blow, half heat
and full heat output.
Class II
Thermostat dial.
Safety
Overheat temperature protection.
IP Rating
IP20
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
p. 101
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
FH-201Z
130
270
280
1.4
Space Heating
Riviera
Oil Filled Radiator
0.7, 1.5 and 2.0 kW
p. 102
0.7 kW model
1.5 and 2.0 kW model
Usage
Portable heater for home and office use.
Features and Benefits
• Oil filled radiator providing
a silent gentle heating solution
•Neon element on indicator
•Moulded handle
2.0 kW model
• Three power settings
(800, 1200 and 2000 W), adjustable thermostatic control
• 24 hour segment timer
• 9 fins
• Floor standing with
smooth rolling castors
for easy movement
• Tip over protection
• Cord cable storage
0.7 kW model
• Single power setting
(700 W), adjustable
thermostatic control
• 7 fins
• Floor standing on
stationary feet
1.5 kW model
• Three power settings
(600, 900 and 1500 W), adjustable thermostatic control
• 7 fins
• Floor standing with
smooth rolling castors
for easy movement
• Tip over protection
• Cord cable storage
Product Code
Power
(kW)
Timer
Current
(amps)
RAD07Y
0.7
No
3
RAD15Y
1.5
No
6.5
RAD20TY
2.0
Yes
9
Space Heating
* Line diagram for 1.5 and 2.0 kW models only.
Electrical Connection
Supplied with a pre-wired (1.9m)
black flex BS plug, cable entry
to the right of the heater.
Controls
Thermostat dial.
2.0 kW model only:
24 hour segment timer with
15 minute interval time slots.
Switch to select on all the time
or timed operation.
Push segments out for the time
interval heater is to be timed on.
Push segments in for the time
interval heater is to be timed off.
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Safety
Overheat temperature protection.
IP Rating
IPX0
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
RAD07Y
380
310
100
3.6
RAD15Y
690
385
160
9.8
RAD20TY
690
465
160
11.8
*Depth excluding feet, depth including feet 240mm for 1.5 and 2.0 kW versions
and 140mm for 0.7 kW version.
p. 103
Outer Casing
Metal
Space Heating
Sahara
Tubular Heater
1, 2, 3 and 4ft
Usage
p. 104
Ideal for heating a small space or area that needs to be protected
from frost, tubular heaters can be used in a number of settings
such as green houses, conservatories, workshops and caravans
to provide a gentle background heat.
Features and Benefits
• Energy efficient heater
providing ambient heating
and frost protection
•Helps reduce condensation
and damp
• Gentle background heat
• IP55 waterproof
•Robust end fixing brackets
(no flimsy plastic clips)
•Available in 1, 2, 3 and 4ft
•Guards are available for all sizes
• Quick and easy installation
• Easy to use
• Internal thermostat
Product Code
Size
(ft)
Power
(W)
Current
(amps)
TH01B
1
45
0.2
TH02B
2
80
0.35
TH03B
3
135
0.6
TH04B
4
180
0.8
Space Heating
Outer Casing
White coated steel tube,
white plastic end caps
and brackets.
Electrical Connection
Supplied with a pre-wired
(1.3m) white cable BS plug,
cable entry to the left
of the unit.
Controls
None
Class I
Safety
Overheat temperature protection.
Approvals
CE
IP Rating
IP55
Standard Warranty
1 year parts or
replacement warranty.
Installation
Wall or floor mounting kit
included and must be used.
p. 105
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
TH01B
55
305
55
1.0
TH02B
55
610
55
1.5
TH03B
55
915
55
2.0
TH04B
55
1222
55
2.5
Space Heating
Sahara
Tubular Heater Guard
1, 2, 3 and 4ft
p. 106
Usage
Ideal for protecting tubular heaters which can get very hot
to touch. Guards should be used to protect people or objects
coming into contact with the hot surfaces.
Features and Benefits
• Stylish curved design
• Available in 1, 2, 3 and 4ft
• Strong, robust and rigid
• Quick and easy installation
• Fittings provided
Product Code
Size
(ft)
THG01
1
THG02
2
THG03
3
THG04
4
Space Heating
Installation
Easy to install with wall
fixings included.
Outer Casing
Powder coated pressed steel
Standard Warranty
1 year parts or
replacement warranty.
p. 107
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
THG01
220
305
100
0.6
THG02
220
610
100
0.9
THG03
220
915
100
1.3
THG04
220
1222
100
1.8
Space Heating
Mojave
Frost Protector
400 W
p. 108
Usage
Ideal for providing frost protection and low levels
of heating in dry environments.
Features and Benefits
•Compact low-powered
convector heater
• Wall mounted –
bracket provided
• Simple and easy to use,
with a single control
• Neon power on indicator
Product Code
Power
(kW)
Timer
Current
(amps)
FW400H
0.4
No
1.7
Space Heating
Outer Casing
Metal with plastic end caps.
Controls
Adjustable, on/off thermostat
IP Rating
IPX0
Installation
Wall mounting kit included
and must be used.
Electrical Connection
Supplied with a pre-wired
(1.5m) white cable BS plug,
cable entry to the top right.
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
FW400H
250
270
100
0.4
p. 109
Safety
Overheat temperature protection.
Space Heating
Inca
Frost Protector
200 W
p. 110
Usage
Provides low levels of heating for an area needing to be protected
from frost, such as changing rooms, caravans, cloakrooms,
workshops or conservatories.
Features and Benefits
•Small and compact
– space saving vertical design
•Heavy duty steel element
•Thermostat
• Strong and durable
•To be used as a supplementary
heat source
Product Code
Power
(kW)
Timer
Current
(amps)
CH-200
0.2
No
0.9
Space Heating
Outer Casing
Powder coated steel with integral
pressed steel guard.
Safety
Overheat temperature protection.
IP Rating
IPX4
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Installation
Wall mounting kit included
and must be used.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
CH-200
300
125
70
0.4
p. 111
Controls
Variable thermostat control knob.
Electrical Connection
Supplied with a pre-wired
(1.5m) white cable BS plug,
cable entry to the bottom
right of the heater.
Space Heating – Towel Rails
Space Heating
Alize
S Shaped Towel Rail
50 and 80 W
p. 112
Usage
For use in bathrooms, to provide dry, warm towels.
Features and Benefits
• Traditional s shaped design
• Available in 50 W (chrome)
and 80 W (white)
• Both models provide
the same level of heat output
• Rapid heat up
• Robust mounting
brackets included
• Lightweight and easy to install
Product Code
Power
(W)
Finish
Current
(amps)
AL80SW
80
White
0.3
AL50SC
50
Chrome
0.2
Space Heating – Towel Rails
Space Heating
Electrical Connection
Installation must comply
with current IEE regulations.
Controls
None
Safety
Overheat temperature protection.
IP Rating
IPX4
Installation
Wall mounting kit included
and must be used.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur
with a minimum break capacity
of 13 amps.
Cable pre-wired (1.5m), white
cable entry to the bottom right
of the towel rail.
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
AL80SW
645
500
110
1.6
AL50SC
645
500
110
1.6
p. 113
Outer Casing
AL80SW – white enamel
coated steel
AL50SC – chrome plated steel
Space Heating
Aquilo
Ladder Style Towel Rail
100 W
p. 114
Usage
For use in bathrooms, to provide dry, warm towels.
Features and Benefits
• Stylish and modern curved ladder design
• Stainless steel easy clean finish
• Rapid heat up
• Robust mounting
brackets included
• Lightweight and easy to install
Product Code
Power
(kW)
Timer
Current
(amps)
AQ100LC
100
No
0.4
Space Heating
Outer Casing
Stainless steel
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a double pole fused spur with
a minimum break capacity
of 13 amps.
Safety
Overheat temperature
protection.
IP Rating
IPX4
Cable pre-wired (1.5m), white
cable entry to the bottom right
of the towel rail.
Installation
Wall mounting kit included
and must be used.
Class I
Approvals
CE
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
AQ100LC
860
530
110
2.9
p. 115
Controls
None
Space Heating
Sun Prince Quartz
Indoor Halogen Infrared Heater
1.0, 1.5, 2.0, 3.0, 4.0 and 4.5 kW
p. 116
Usage
Ideal for heating applications in draughty or tall buildings such
as garages, warehouses, factories and similar difficult to heat
situations where convection heating would be impractical.
Features and Benefits
• Allows heating of targeted areas
• Quartz halogen lamps operate
at a very high temperature,
converting almost all the
electrical energy into short
wavelength infrared radiation
• Stylish and robust construction
• Silent operation
• Heaters are single, double
or triple chassis depending
on number of lamps included
(see table below)
•Lamps made from high
temperature resistant quartz
glass and last an average
of 7000 hours
• Gold and ruby lamps available
•Instantaneous cost
effective heating
•Wall mounted
– secure bracket included
• Lamps must not be handled
with bare hands
• Suitable for indoor use only
Product Code
Power
(kW)
Lamp Colour*
Lamp Qty x W
SP1000HL
1.0
Gold
1 x L1000CGL
SP1500HL
1.5
Ruby
1 x L1500CL
SP2000HL
2.0
Gold
1 x L2000CGL
SP3000HL
3.0
Ruby
2 x L1500CL
SP4000HL
4.0
Gold
2 x L2000CGL
SP4500HL
4.5
Ruby
3 x L1500CL
*Gold lamps are available for SP1500H, SP3000H and SP4500H at an extra cost
Space Heating
Heat Requirements
Estimate total amount of wattage
required using the formula below.
Floor Area x Watts/M2 Required
(M2)
(See table below)
Outer Casing
Grey powder coated steel chassis,
chrome plated safety guard.
IP Rating
IPX0
Installation
Wall mounting kit included
and must be used.
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a suitably rated isolating switch
with a contact separation of at
least 3mm in all poles.
Highly
Insulated
150
200
250
Insulated
175
225
250
Un Insulated
200
250
275
Class I
Light
Cladding
250
300
300
Approvals
CE
Badly
Insulated
/ Damp
300
300
300
Optional soft start controllers
are available.
Standard Warranty
1 year parts or
replacement warranty
(excluding lamps).
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
SP1000HL
198
474
141
3.09
SP1500HL
198
474
141
3.09
SP2000HL
198
474
141
3.09
SP3000HL
398
474
141
5.35
SP4000HL
398
474
141
5.35
SP4500HL
598
474
141
7.57
p. 117
Watts / M2 Required
Heavy
Light
Spot
Work
Work
Heating
Space Heating
Quartz Controller
Soft Start
3.0 kW
p. 118
Usage
Soft start heating controllers are designed to work alongside
all makes of quartz halogen infrared heater.
Features and Benefits
•Save energy by ensuring that
halogen heaters are only on
when you need them to be
•Can control up to 3.0 kW
of Quartz heating load
•Protect switchgear from high
inrush currents when the lamps
are first switched on from cold
•PIR or Push button
models available
• Weatherproof for outdoor use
• Run time adjustment
from 1 – 99 minutes
•Temperature adjustment
– the unit will not operate
if ambient temperature above threshold
• Easy to install
•Push Button model – once activated will remain on for
pre-set time or can be turned
off by pushing the button
•PIR model – automatically
activated by motion from up
to 5m and will remain on for
the pre-set time, continuous
movement will reset the timer
Product Code
Power
(kW)
Operating Temp
(°C)
Current
(amps)
QZC-PB3
Up to 3.0 kW
2 to 60
6
QZC-PIR3
Up to 3.0 kW
2 to 60
6
Space Heating
Outer Casing
ABS
Installation
Wall mounting kit included
and must be used.
Switching Capacity
3.0 kW maximum
13 amps
Electrical Connection
Installation must comply
with current IEE regulations.
The product should be connected
to the fixed wiring of the property
via a suitably rated isolating switch
with a contact separation of at
least 3mm in all poles.
Lamp On-Time
1 – 99 minutes
Gland Diameter
20mm
Class I
Approvals
CE
IP Rating
IP65
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
QZC-PB3
100
100
60
0.5
QZC-PIR3
100
100
60
0.5
p. 119
Current Consumption
(control circuit)
2.0 W (10mA max)
Space Heating
Sun King Quartz
Outdoor Halogen Infrared Heater
1.5 kW
Usage
Ideal for heating outdoor domestic and commercial applications,
such as patios, beer gardens and smoking areas.
p. 120
Features and Benefits
• Allows heating of targeted area
•Quartz halogen lamps operate at a very high temperature, converting almost all the
electrical energy into short
wavelength infrared radiation
•Stylish, lightweight
aluminium construction
• Silent operation
•Lamps made from high
temperature resistant quartz
glass and last an average
of 7000 hours
• Gold lamp
• Weatherproof for outdoor use
• Side reflectors for added heat output and efficiency
•Instantaneous cost
effective heating
• Wall mounted – secure
bracket included
•Lamps must not be
handled with bare hands
Product Code
Power
(kW)
Timer
Current
(amps)
SK1500
1.5
Gold
1 x L1500A
Space Heating
Outer Casing
Aluminium chassis and grille.
Installation
Wall mounting kit included
and must be used.
Controls
Optional soft start controllers
are available.
Mount 2.0m from the floor
and 1.5m from the side of the wall.
See instructions for the angling
guidelines.
IP Rating
IP24
Electrical Connection
Supplied with a pre-wired (1.8m)
BS plug, cable entry is central
to the back plate of the unit.
Class I
Standard Warranty
1 year parts or
replacement warranty.
Product Code
Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
SK1500
100
455
130
1.0
p. 121
Approvals
CE
Stockists
Hyco products are available nationally through
most electrical wholesalers and plumbers merchants.
Contact our sales team for details of your
nearest stockist.
Warranty
Warranty details for each product are provided
on the relevant product page.
p. 122
Most Hyco products are covered by a standard
1 year parts or replacement warranty. Our Zen boiling
and chilled tap range benefits from a 2 year parts
or replacement warranty.
If there is a manufacturing defect we will send spare
parts or collect, repair and return the unit or at our
discretion we may supply a replacement product.
Our Omega and Microboil boiling water units
come with a 1 year on-site warranty as standard.
A 3 year on-site warranty is available on request
at additional cost. We will arrange for a service
engineer to rectify any manufacturing defect.
For our water heating products scale
and frost damage are not covered by warranty.
We will be happy to quote on any product for other
warranty options including on-site and greater than
1 year – where required these must be taken
out at time of purchase.
Full details of our guarantee policy can be found
on our website.
Contact Us
If you or your customer are unfortunate enough
to experience a problem you should first contact
our service department on 01924 225 200 before
taking any further action.
Experience has shown that issues can often
be resolved without the need to return
or un-install the product.
Spare Parts
Spare parts are available through our stockists.
For help or advice on spare parts please contact
our customer services team. customer services team.
p. 123
Product Specification
We aim to ensure that all the information in this
catalogue is accurate at the date of publication.
However, we reserve the right to change
specifications at any time without notice.
Trademarks
The terms 'Aquila', 'Handyflow', 'Hyco', 'Jetstream',
'Microboil', 'Powerflow', 'Rho', 'Speedflow', 'Wave'
'Zen', 'Zen Spa', 'Zen Life' and 'Zen Ice' are
all registered trademarks.
Branding, Design & Print
United by Design
www.unitedbydesign.co
hyco.co.uk
p. 124
Hyco Manufacturing Ltd
Normandy Court
Express Way
Castleford
WF10 5NR
T 01924 225 200
F 01924 225 210
E sales@hyco.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising