Catalogue TechSupply
www.speakercraft.com
Version 6.0 - 28.2.2008
In-Ceiling & In-Wall Speakers
AIM is the finest sounding in-ceiling speaker system ever created!
Unique in concept and revolutionary in design, the Theater In Motion Experience is the most dramatic
advancement in custom audio since we invented the inwall speaker over twenty years ago. Mounted
flush in the ceiling these speakers automatically drop down to a 15o , 30o or 45 ̊ angle and then
rotate to aim toward any position in the room. Utilizing a remote control and multiple presets , the
system can be configured to a variety of seating positions and configurations. This makes the TIME
speaker an In-Ceiling and In-Room loudspeaker in the same package. Why choose between the two
when you can have both?
TIME
In-Ceiling Speaker Systems
2 - SpeakerCraft design improvements, specifications and prices may change without notice
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
8” TIME - In - Ceiling Speakers
TIME Five
• Motorized in-ceiling speaker descends from 15° to 45° and Rotates 270°
• 8” Kevlar Cone Woofer
• 1” Aluminum/Magnesium Dome Tweeter
• Timbre-Matched to AIM Five
• Fully Programmable
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch settings
• Frequency Response: 33Hz - 20kHz ±2dB
• Diameter x Depth: 29.5 x 28 cm
• Cut-out Diameter: 24.6 cm
Product
TIME Five
Article
09-7374
TIME Controller
• Can be controlled via IR and RS232
• Features rich hand-held IR remote control (included)
• Single rack design
• Dimensions (H x W x D): 5.4 x 43.8 x 25.4 cm
Product
TIME Controller
Article
09-7377
©TechSupply SA - 28.02.08 - v6.0
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AIM is the finest sounding in-ceiling speaker system ever created!
Speakercraft were the first company to introduce a pivoting speaker. They patented the design and
will defend our right to be the only company to offer our dealers this superior technology. The
SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering
efforts in this industry’s history, has led to the creation of the patented AIM series of fully directional
in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining
discretely recessed behind a flush-mounted grille.
If listening position or tastes change, the speaker can be easily aimed in another direction with a
simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made
quality make the AIM series one of the most exceptional loudspeakers ever.
AIM
In-Ceiling Speaker Systems
4 - SpeakerCraft Front-Mounted
Treble Switch
WavePlaneTM
Tweeter Baffle
Front-Mounted
Bass Switch
8” Woofer
Independently
Pivots & Rotates
up to 30°
Heat Sink Dissipates
Voice Coil Heat for
Increased
Woofer Performance
1” Tweeter
Independently
Pivots up to 30°
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
8” AIM - In - Ceiling Speakers
AIM8 Five
• Pivoting and Rotating 8” Kevlar Cone Woofer
• Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Accu-Grille dramatically reduces unwanted acoustic reflections
• Timbre-Matched to AIM7 Five and TIME Five
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 150 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch settings
• Frequency Response: 33Hz - 20kHz ±2dB
• Diameter x Depth: 29.2 x 14.7 cm
• Cut-out Diameter: 24.8 cm
Product
AIM 8 Five
Article
09-6507
AIM8 Four
• Pivoting and Rotating 8” Aluminum/Magnesium Cone Woofer
• Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Accu-Grille dramatically reduces unwanted acoustic reflections
• Timbre-Matched to AIM7 Four, CRS8/6 Four, AIM7 MT Four and MT8/6 Four, MT8 Four
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 150 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch settings
• Frequency Response: 35Hz - 20kHz ±2dB
• Diameter x Depth: 29.2 x 14.7 cm
• Cut-out Diameter: 24.8 cm
Product
AIM 8 Four
Article
09-6502
AIM8 Three
• Pivoting and Rotating 8” Aluminum Cone Woofer
• Pivoting 1” Aluminum Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Accu-Grille dramatically reduces unwanted acoustic reflections
• Timbre-Matched to AIM7 Three, CRS8/6 Three, AIM MT Three, MT8/6 Three and AIM LCR Three
• Efficiency: 89dB 1W/1m
• Power Recommendations: 5 - 150 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch settings
• Frequency Response: 37Hz - 20kHz ±2dB
• Diameter x Depth: 29.2 x 14.7 cm
• Cut-out Diameter: 24.8 cm
Product
AIM 8 Three
Article
09-6503
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
8“ AIM - In-Ceiling Speakers
AIM8 Two
• Pivoting and Rotating 8” Resin Reinforced Fiberglass Cone Woofer
• Pivoting 1” Treated Silk Dome Tweeter
• Front mounted switch allows for up to ±3dB of Treble adjustment
• Timbre-Matched to CRS8 Two, CRS Two, MT8 Two and MT Two
• Efficiency : 89dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±2dB
• Diameter x Depth : 29.2 x 14.7 cm
• Cut-out Diameter : 24.8 cm
Product
AIM8 Two
Article
09-6508
AIM8 One
• Pivoting and Rotating 8” Injection Molded Polypropylene Cone Woofer
• Pivoting 1” Treated Silk Dome Tweeter
• Timbre-Matched to CRS8 One, CRS One, MT8 One and MT One
• Efficiency : 88dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±2dB
• Diameter x Depth : 29.2 x 14.7 cm
• Cut-out Diameter : 24.8 cm
Product
AIM8 One
Article
09-6509
7“ AIM - In-Ceiling Speakers
AIM7 Five
• Independently Pivoting and Rotating 7” Kevlar Cone Woofer
• Independently Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted separate Bass and Treble switches allow for up to ±3dB adjustment
• Accu-Grille dramatically reduces unwanted acoustic reflections
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 150 watts (undistorted)
• Impedance : 8/6/4Ω depending on switch settings
• Frequency Response : 35Hz - 20kHz ±3dB
• Diameter x Depth : 25 x 13.1 cm
• Cut-out Diameter : 21 cm
6 - SpeakerCraft Product
AIM7 Five
Article
09-7329
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
7” AIM - In - Ceiling Speakers
AIM7 Four
• Independently Pivoting and Rotating 7” Aluminum/Magnesium Cone Woofer
• Independently Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted separate Bass and Treble switches allow for up to ±3dB adjustment
• Accu-Grille dramatically reduces unwanted acoustic reflections
• Efficiency: 92dB 1W/1m
• Power Recommendations: 5 - 150 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch settings
• Frequency Response: 37Hz - 20kHz ±3dB
• Diameter x Depth: 25 x 13.1 cm
• Cut-out Diameter: 21 cm
Product
AIM 7 Four
Article
09-7328
AIM7 Three
• Pivoting and Rotating 7” Aluminum Cone Woofer
• Pivoting 1” Aluminum Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Accu-Grille dramatically reduces unwanted acoustic reflections
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 125 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch settings
• Frequency Response: 40Hz - 20kHz ±3dB
• Diameter x Depth: 25 x 13.1 cm
• Cut-out Diameter: 21 cm
Product
AIM 8 Three
Article
09-7327
AIM7 Two
• Pivoting and Rotating 7” Resin Reinforced Fiberglass Cone Woofer
• Pivoting 1” Treated Silk Dome Tweeter
• Front mounted switch allows for up to ±3dB of Treble adjustment
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 125 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±3dB
• Diameter x Depth: 25 x 13.1 cm
• Cut-out Diameter: 21 cm
Product
AIM 7 Two
Article
09-7326
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
5“ AIM - In-Ceiling Speakers
AIM5 Three
• Pivoting and Rotating 51⁄4” Aluminum Cone Woofer
• Pivoting 3⁄4” Aluminum Dome Tweeter
• Timbre-Matched to all ... Three speakers
• Front Mounted Bass & Treble Equalization Switches
• Efficiency : 89dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch settings
• Frequency Response: 50Hz - 20kHz ±2dB
• Diameter x Depth : 20.8 x 11.5 cm
• Cut-out Diameter : 16.9 cm
Product
AIM5 Three
Article
09-7340
AIM5 One
• Pivoting and Rotating 51⁄4” Injection Molded Polypropylene Cone Woofer
• Pivoting 3⁄4” Treated Silk Dome Tweeter
• Timbre-Matched to AIM8 One, CRS8 One, CSS6 One, AIM7 MT One, TIME One, AIM Monitor 1,
AIM Monitor LCR 1 and AIM LCR 3
• Front Mounted Treble Equalization Switch
• Efficiency : 88dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±2dB
• Diameter x Depth : 20.8 x 11.5 cm
• Cut-out Diameter : 16.9 cm
8 - SpeakerCraft Product
AIM5 One
Article
09-7341
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AIM7 Five
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
Custom Round Series (CRS) speakers are specifically designed for in-ceiling applications. The series
contains a variety of five-inch, six-inch and eight-inch two-way in-ceiling speakers. Several of these
models incorporate our exclusive WavePlaneTM tweeter baffle. The WavePlaneTM aids in high
f requency forward radiation and overall speaker tonal balance. Many speakers in this series include
pivoting tweeters which allow the user to direct high frequencies toward a desired listening area.
Most CRS speakers also come equipped with the ability to adjust woofer and/or tweeter volume
levels. Offering superb sound quality, outstanding features, and a lifetime warranty, the Custom
Round Series has become the industry’s most popular line of in-ceiling speakers.
CRS
Custom Round Series
Standard Co-Axial
WavePlaneTM Technology
• No Tweeter Baffle
• Uneven Forward Dispersion
which causes distortion
• 95% Solid Plane for Tweeter
• 80% Open Area for Woofer
• Even dispersion, less distortion
• Not available on other brands
10 - SpeakerCraft Our speakers sound
much better off-axis !
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
8“ CRS In-Ceiling Speakers
CRS8 Four
• 8” Aluminum/Magnesium Cone Woofer, Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 150 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch position
• Frequency Response: 36Hz - 20kHz ±2dB
• Diameter x Depth: 30.3 x 11.5 cm
• Cut-out Diameter: 24.8 cm
Product
CRS 8 Four
Article
09-6512
CRS8 Three
• 8” Aluminum Cone Woofer, Pivoting 1” Aluminum Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 125 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch position
• Frequency Response: 38Hz - 20kHz ±2dB
• Diameter x Depth: 30.3 x 11.5 cm
• Cut-out Diameter: 24.8 cm
Product
CRS 8 Three
Article
09-6506
CRS8 Two
• 8” Glass Composite Cone Woofer, Pivoting 1” Silk Dome Tweeter
• Front mounted switch allows for up to ±3dB of Treble adjustment
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±2dB
• Diameter x Depth: 30.3 x 11.5 cm
• Cut-out Diameter: 24.8 cm
Product
CRS 8 Two
Article
09-6513
CRS8 One
• 8” Polypropylene Cone Woofer, Pivoting 1” Silk Dome Tweeter
• Efficiency: 89dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±2dB
• Diameter x Depth: 30.3 x 11.5 cm
• Cut-out Diameter: 24.8 cm
Product
CRS 8 One
Article
09-6514
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
6” CRS In-Ceiling Speakers
CRS Four
• 6 1⁄2“ Aluminum/Magnesium Cone Woofer with Dual Voice Coil and Rubber Surround
• Pivoting 1“ Aluminum/Magnesium Dome Tweeter with Neodymium Magnet
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Efficiency : 90dB 1W/1m
• Power Recommendations: 5 - 150 watts (undistorted) on 8/6/4Ω depending on switch position
• Frequency Response : 37Hz - 20kHz ±2dB
• Diameter x Depth: 24.9 x 10.4 cm
• Cut-out Diameter : 21 cm
Product
CRS Four
Article
09-3495
CRS Three
• 6 1⁄2” Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround
• Pivoting 1” Liquid Cooled Aluminum Dome Tweeter with Neodymium Magnet
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Efficiency : 90dB 1W/1m
• Power Recommendations : 5 - 125 watts (undistorted) on 8/6/4Ω depending on switch position
• Frequency Response : 40Hz - 20kHz ±2dB
• Diameter x Depth : 24.9 x 9.7 cm
• Cut-out Diameter : 21 cm
Product
CRS Three
Article
09-3496
CRS Two
• 6 1⁄2” Glass Composite Cone Woofer with Rubber Surround
• Pivoting 1” Liquid Cooled Silk Dome Tweeter with Neodymium Magnet
• Front mounted switch allows for up to ±3dB of Treble adjustment
• Efficiency : 92dB 1W/1m
• Power Recommendations: 5 - 120 watts (undistorted) on 8Ω
• Frequency Response : 40Hz - 20kHz ±2dB
• Diameter x Depth :24.9 x 9.7 cm
• Cut-out Diameter :21 cm
Product
CRSTwo
Article
09-3497
CRS One
• 6 1⁄2” Polypropylene Cone Woofer with Rubber Surround
• Pivoting 1”Liquid Cooled Silk Dome Tweeter with Neodymium Magnet
• Efficiency : 92dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted) on 8Ω
• Frequency Response : 40Hz - 20kHz ±2dB
• Diameter x Depth : 24.9 x 9.7 cm
• Cut-out Diameter : 21 cm
12 - SpeakerCraft Product
CRS One
Article
09-3498
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
5“ CRS In-Ceiling Speakers
5.5R
• 5 1⁄4” Aluminum Cone Woofer
• 1” Aluminum Dome Tweeter
• Efficiency: 89dB 1W/1m
• Power Recommendations: 5-100 watts (undistorted)
• Frequency Response: 50Hz - 20kHz
• Impedance: 8Ω
• Diameter x Depth: 21.5 x 8.3 cm
• Cut-out Diameter: 17.2 cm
Product
CRS 5.5R
Article
09-6553
5.2R
• 5 1⁄4” Polypropylene Cone Woofer with Urethane Surround
• 1⁄2”
Liquid Cooled Polyamide Dome Tweeter
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 50 watts (undistorted)
• Frequency Response: 55Hz - 20kHz
• Impedance: 8Ω
• Diameter x Depth: 21.5 x 8.3 cm
• Cut-out Diameter: 17.2 cm
Product
CRS 5.2R
Article
09-3500
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
CSS Custom Square In-Ceiling Speaker
Simple solutions are often the most effective. In response to requests from the field , we have
taken the technology from our Award Winning Custom Round Series in-ceiling speakers and created
a line of square ceiling speakers. Since esthetics are such a large part of the appeal of flush mounted
loud speakers , the new CSS 6 series will offer yet an other appearance option .
The CSS 6 One and CSS 6 Three both feature six inch woofers and coaxially mounted tweeters .
They are identical to their round counter parts in the CRS series with regards to drivers and sonic
performance.
As with the CRS series, the CSS product features our innovative Wave PlaneTM technology.
CSS
Custom Square Speaker
14 - SpeakerCraft Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
6” CSS - In - Ceiling Speakers
CSS6 Three
• 6 1⁄2” Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround
• Pivoting 1” Liquid Cooled Aluminum Dome Tweeter with Neodymium Magnet
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Timbre-Matched to AIM8 Three, CRS8 Three, MT8 Three and MT Three
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 125 watts (undistorted)
• Impedance: 8/6/4Ω depending on switch position
• Frequency Response: 40Hz - 20kHz ±2dB
• Dimensions (L x H x D): 22.3 x 22.3 x 10.2 cm
• Cut-out: 18.1 x 18.1 cm
Product
CSS6 Three
Article
09-7119
CSS6 One
• 6 1⁄2” Polypropylene Cone Woofer with Butyl Rubber Surround
• Pivoting 1”Liquid Cooled Silk Dome Tweeter with Neodymium Magnet
• Timbre-Matched to AIM8 One, CRS8 One, MT8 One and MT One
• Efficiency: 92dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 50Hz - 20kHz ±2dB
• Dimensions (L x H x D): 22.3 x 22.3 x 9.6 cm
• Cut-out: 18.1 x 18.1 cm
Product
CSS6 One
Article
09-7120
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AIM DT speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and
walk-in closets are all places where music would be welcome but the cost of the speakers and the
installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to
address this challenge. No need to have a separate amplifier for a mono signal, no circuit to blend
both channels together, no cancellation from simply throwing a “Y” cord into the mix, just hook up
both the left and right channels and let it rock.
Now we proudly announce two new DT products to the line, the AIM 7 DT and AIM 8 DT. These both
offer the ingenuity of the original DT models with the addition of being able to pivot the entire
speaker and aim it toward the listening area. Think of the applications you can now address and truly
make it a “whole house” system.
AIM DT
Dual Tweeter Speaker Systems
All In-Ceiling Speakers Feature:
• Aluminum Grilles
• 100% weather-resistant
• Paint masks included
• No mounting brackets required
• Optional Sound Enclosures and New Construction Brackets available
• Exclusive SpeakerCraft WavePlaneTM technology aids in high frequency dispersion (on equipped models)
16 - SpeakerCraft Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
8” AIM DT In - Ceiling Speakers
AIM8 DT Three
• 8” Pivoting Aluminum Cone Woofer
• Dual 1” Aluminum Dome Tweeters
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 45Hz - 20kHz
• Diameter x Depth: 29.1 x 14.7 cm
• Cut-out Diameter: 24.8 cm
Product
AIM DT Three
Article
09-7854
AIM8 DT One
• 8” Pivoting Polypropylene Cone Woofer
• Dual 1” Silk Dome Tweeters
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 80 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 48Hz - 20kHz
• Diameter x Depth: 29.1 x 14.7 cm
• Cut-out Diameter: 24.8 cm
Product
AIM8 DT One
Article
09-7855
DT8 Zero
• 8” Polypropylene Cone Woofer with Dual Voice Coil and Urethane Surround
• Dual 1⁄2” Liquid Cooled Polyamide Dome Tweeters
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 70 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 55Hz - 20kHz ± 4dB
• Diameter x Depth: 30.3 x 9.9 cm
• Cut-out Diameter: 24.8 cm
Product
DT8 Zero
Article
09-7856
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
6-7” AIM DT In-Ceiling Speakers
AIM7 DT Three
• 7” Pivoting Aluminum Cone Woofer
• Dual 1” Aluminum Tweeters
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 60 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 55Hz - 20kHz
• Diameter x Depth: 24.9 x 12.1 cm
• Cut-out Diameter: 21 cm
Product
AIM7 DT Three
Article
09-7147
AIM7 DT One
• 7” Pivoting Polypropylene Cone Woofer
• Dual 1” Silk Dome Tweeters
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 60 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 55Hz - 20kHz
• Diameter x Depth: 24.9 x 10.8 cm
• Cut-out Diameter: 21 cm
Product
AIM7 DT One
Article
09-7857
DT6 Zero
• 61⁄2” Polypropylene Cone Woofer with Dual Voice Coil and Rubber Surround
• Dual 1⁄2” Liquid Cooled Polyamide Dome Tweeters
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 60 watts (undistorted)
• Impedance: 8Ω
• Frequency response: 60Hz - 20kHz ± 4dB
• Diameter x Depth: 24.9 x 8.9 cm
• Cut-out Diameter: 21 cm
18 - SpeakerCraft Product
DT6 Zero
Article
09-3505
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AIM Wide
Ceiling speakers have become the first choice for the majority of consumers who are interested in
home theater or multi-room installations. At SpeakerCraft, we have addressed this demand in a
variety of different models. The new AIM WIDE was originally intended for creating a diffused rear
sound field in a home theater. However, it has become clear that customers are just as interested in
using them for high-performance multi-room installations.
The AIM WIDE has the same footprint and woofers as the AIM 8. However, the rest of the speaker is
a huge departure from that familiar format. A unique dual mid-tweeter module is mounted directly
over the woofer with two 2-inch dome midrange drivers and two 1-inch dome tweeters facing 70
degrees off access from each other. The result is ultra-wide dispersion with tremendous fidelity.
You will find numerous applications for all three AIM WIDE models. Imagine them in your next
installation.
AIM Wide
Wide angle system
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
8” AIM Wide In-Ceiling Speakers
AIM Wide Five
• Dual 3⁄4” Pivoting Aluminum Dome Tweeters
• Dual 2” Midrange Kevlar Cone Woofers
• 8” Pivoting Kevlar Cone Woofer
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 150 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 33Hz - 20kHz
• Diameter x Depth : 29.1 x 16.6 cm
• Cut-out Diameter : 24.8 cm
Product
AIM Wide Five
Article
09-7858
AIM Wide Three
• Dual 3⁄4” Pivoting Aluminum Dome Tweeters
• Dual 2” Midrange Aluminum Cone Woofers
• 8” Pivoting Aluminum Cone Woofer
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 150 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 37Hz - 20kHz
• Diameter x Depth : 29.1 x 16.6 cm
• Cut-out Diameter : 24.8 cm
Product
AIM Wide Three
Article
09-7859
AIM Wide One
• Dual 3⁄4” Silk Dome Tweeters
• Dual 2” Midrange IMG Cone Woofers
• 8” Pivoting IMG Cone Woofer
• Efficiency : 88dB 1W/1m
• Power Recommendations : 5 - 125 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 40Hz - 20kHz
• Diameter x Depth : 29.1 x 16.6 cm
• Cut-out Diameter : 24.8 cm
20 - SpeakerCraft Product
AIM Wide One
Article
09-7860
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AccuFit Series
The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions
in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall,
unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of
sound enclosures to address many of these situations but there are space restrictions that negate
this option.
The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have
the proper amount of air space to deliver the best sound performance regardless of the installation
environment. This new line of technically advanced speakers will fit just about any installation
N
ew
pr
od
uc
t
application.
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AccuFit CRS
Enclosed speaker
AccuFit CRS7 In-Ceiling Speakers
AccuFit CRS7 Three
• 3⁄4” Pivoting Aluminum Dome Tweeter
• 7” Aluminum Cone Woofer
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 90 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 60Hz - 20kHz
• Diameter x Depth: 25.1 x 7 cm
09-7861
pr
AccuFit CRS7 Three
Article
N
ew
Product
od
uc
t
• Cut-out Diameter: 21 cm
AccuFit CRS7 One
• 3⁄4” Pivoting Silk Dome Tweeter
• 7” Polypropylene Cone Woofer
• Efficiency : 90dB 1W/1m
• Power Recommendations : 5 - 90 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 65Hz - 20kHz
• Diameter x Depth: 25.1 x 7 cm
22 - SpeakerCraft pr
09-7862
ew
AccuFit CRS7 One
Article
N
Product
od
uc
t
• Cut-out Diameter: 21 cm
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AccuFit Series
The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions
in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall,
unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of
sound enclosures to address many of these situations but there are space restrictions that negate
this option.
The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have
the proper amount of air space to deliver the best sound performance regardless of the installation
environment. This new line of technically advanced speakers will fit just about any installation
N
ew
pr
od
uc
t
application.
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AccuFit DT
Enclosed Stereo speaker
AccuFit DT7 In-Ceiling Speakers
AccuFit DT7 Three
• Dual 3⁄4” Aluminum Dome Tweeters
• 7” Aluminum Cone Woofer
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 90 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 60Hz - 20kHz
• Diameter x Depth: 25.1 x 7 cm
09-7452
pr
AccuFit DT7 Three
Article
N
ew
Product
od
uc
t
• Cut-out Diameter: 21 cm
AccuFit DT7 One
• Dual 3⁄4” Silk Dome Tweeters
• 7” Polypropylene Cone Woofer
• Efficiency : 90dB 1W/1m
• Power Recommendations : 5 - 90 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 65Hz - 20kHz
• Diameter x Depth: 25.1 x 7 cm
24 - SpeakerCraft pr
09-7453
ew
AccuFit DT7 One
Article
N
Product
od
uc
t
• Cut-out Diameter: 21 cm
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AccuFit Series
AccuFit CRS7 One / Three; AccuFit DT7 One / Three
Overall Diameter : 252 mm
Cut-out Diameter : 210 mm
72 mm
69 mm
78 mm
Coupe :
Ceilling
AccuFit Ultra Slim One / Three
Overall Diameter : 252 mm
Cut-out Diameter : 210 mm
52 mm
50 mm
58 mm
Coupe :
Ceilling
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AccuFit Ultra Slim Series
The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions
in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall,
unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of
sound enclosures to address many of these situations but there are space restrictions that negate
this option.
The AccuFit Ultra Slim series of shallow depth full enclosed architectural speakers ensures that the
drivers have the proper amount of air space to deliver the best sound performance regardless of
the installation environment. This new line of technically advanced speakers will fit just about any
t
installation application.
od
pr
ew
N
Ultra Slim enclosed speaker
uc
AccuFit Ultra Slim
26 - SpeakerCraft Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AccuFit Ultra Slim In - Ceiling Speakers
AccuFit Ultra Slim Three
• 3⁄4” Aluminum Dome Tweeter
• Two 3” Cumstom Aluminum Cone Woofers
• Two 3” Cumstom Aluminum Cone Midrange Drivers
• Efficiency: 90dB 1W/1m
• Power Recommendations: 60 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 90Hz - 20kHz
• Diameter x Depth: 25.2 x 5.1 cm
pr
09-7372
ew
AccuFit Ultra Slim Three
Article
N
Product
od
uc
t
• Cut-out Diameter: 21 cm
AccuFit Ultra Slim One
• 3⁄4” Pivoting Silk Dome Tweeter
• Two 3” Cumstom Polypropylene Cone Woofers
• Two 3” Cumstom Polypropylene Cone Midrange Drivers
• Efficiency: 89dB 1W/1m
• Power Recommendations: 60 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 90Hz - 20kHz
• Diameter x Depth: 25.2 x 5.1 cm
pr
09-7373
ew
AccuFit Ultra Slim One
Article
N
Product
od
uc
t
• Cut-out Diameter: 21 cm
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AccuFit Ultra Slim In-Ceiling Speakers
AccuFit Ultra Slim Three
28 - SpeakerCraft Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
In-Wall Home Theater Speaker
As built in higher performance home theaters are installed around the world, we are finding that
more customers are demanding front channel speakers with greater fidelity and higher sound
pressure levels than ever before. And, here is our answer. The AIM Cinema Monitors are bigger,
better and badder than anything in the category.
These speakers utilize the equivalent of an AIM LCR on a pivoting sub-baffle for the mid-bass, midrange and high frequencies. Below that are two high performance 6-inch woofers on a separate
stationary sub-baffle to increase output and extend the low frequencies. Available in models ONE,
THREE and FIVE, now the incredible impact and dynamics necessary in today’s home theater are
available in a package that still mounts entirely in the wall.
AIM Cinema
In-Wall Home Theater Speaker
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AIM Cinema In-Wall Speakers
AIM Cinema Five
• Two 6” Paper cone woofers with Kevlar fibers
• Two 5” Pivoting Kevlar Cone Woofers with Phasing Cones
• Pivoting 1” Aluminum Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass, Middle and Treble adjustment
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 200 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 35Hz - 20kHz ±3dB
• Dimensions : H 77.7 x W 23.5 x D 10.2 cm
pr
09-7863
ew
AIM Cinema Five
Article
N
Product
od
uc
t
• Wall Cut-out Dimensions : H 73.1 x W 19.1 cm
AIM Cinema Three
• Two 6” Paper cone woofers with Kevlar fibers
• Two 5” Pivoting Aluminum Cone Woofers with Phasing Cones
• Pivoting 1” Aluminum Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass, Middle and Treble adjustment
• Efficiency : 86dB 1W/1m
• Power Recommendations : 5 - 175 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 39Hz - 20kHz ±3dB
• Dimensions : H 77.7 x W 23.5 x D 10.2 cm
pr
09-7864
ew
AIM Cinema Three
Article
N
Product
od
uc
t
• Wall Cut-out Dimensions : H 73.1 x W 19.1 cm
AIM Cinema One
• Two 6” Paper cone woofers with Kevlar fibers
• Two 5” Pivoting Injection Molded Graphite Cone Woofers with Phasing Cones
• Pivoting 1” Silk Dome Tweeter
• Front mounted switche allow for up to ±3dB of Bass adjustment
• Efficiency : 85dB 1W/1m
• Power Recommendations : 5 - 125 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 40Hz - 20kHz ±3dB
• Dimensions : H 77.7 x W 23.5 x D 10.2 cm
30 - SpeakerCraft od
pr
09-7865
ew
AIM Cinema One
Article
N
Product
uc
t
• Wall Cut-out Dimensions : H 73.1 x W 19.1 cm
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
Pivotating In-Wall Home Theater Speaker
Building on the award winning AIM series of fully pivoting ceiling speakers, the new in-wall AIM LCR
series dramatically improves flexibility of in-wall applications. With a dual woofer and a single dome
tweeter configuration, the in-wall AIM pivots side to side or up and down (depending on vertical or
horizontal installation) by 17°. The pivoting tweeters can be angled an additional 30°. This allows
physical tow-in or vertical adjustments while remaining completely flush in the wall. This proprietary
feature sets the AIM LCR apart from all other in-wall offerings in the industry.
The In-wall AIM LCR will be available in two models with the same driver configuration. The AIM LCR
One features two 51⁄4 inch injection molded graphite cone woofers with phasing plugs and a single
1 inch silk dome tweeter. The AIM LCR Three upgrades to dual 51⁄4 inch aluminum cone woofers with
phasing plugs and a single aluminum dome tweeter.
With the number of flat panel displays and full in-wall home theaters being installed today, the inwall AIM LCR is a perfect solution for the entire front sound stage left, center and right.
AIM LCR
Pivotating In-Wall Home Theater Speaker
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AIM LCR In-Wall Speakers
AIM LCR 5
• Pivoting Woofer Baffle
• Two 51⁄4” Kevlar Cone Woofers with Phasing Cones
• Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Efficiency : 91dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 48Hz - 20kHz ±3dB
• Dimensions : H 40.8 x W 24.2 x D 10.2 cm
• Wall Cut-out Dimensions : H 36.2 x W 19.1 cm
Product
AIM LCR 5
Article
09-7866
AIM LCR 3
• Pivoting Woofer Baffle
• Two 51⁄4” Aluminum/Magnesium Cone Woofers with Phasing Cones
• Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted switches allow for up to ±3dB of Bass and Treble adjustment
• Efficiency : 90dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted)
• Impedance : 8/6Ω depending on switch settings
• Frequency Response : 50Hz - 20kHz ±3dB
• Dimensions : H 40.8 x W 24.2 x D 10.2 cm
• Wall Cut-out Dimensions : H 36.2 x W 19.1 cm
Product
AIM LCR 3
Article
09-7139
AIM LCR 1
• Pivoting Woofer Baffle
• Two 51⁄4” Injection Molded Graphite Cone Woofers with Phasing Cones
• Pivoting 1” Silk Dome Tweeter
• Efficiency : 89dB 1W/1m
• Power Recommendations : 5 - 80 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 55Hz - 20kHz ±3dB
• Dimensions : H 40.8 x W 24.2 x D 10.2 cm
• Wall Cut-out Dimensions : H 36.2 x W 19.1 cm
32 - SpeakerCraft Product
AIM LCR 1
Article
09-7138
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AIM LCR In-Wall Speakers
AIM LCR3 Five
• Pivoting Woofer Baffle
• Two 3” Kevlar Cone Woofers with Phasing Cones
• Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted switche allow for up to ±3dB of Treble adjustment
• Efficiency: 86dB 1W/1m
• Power Recommendations: 5-60 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 60Hz - 20kHz
• Dimensions: H 25.4 x W 14.6 x D 7.3 cm
• Wall Cut-out Dimensions: H 22.9 x W 12.1 cm
Product
AIM LCR3 Five
Article
09-7867
AIM LCR3 Three
• Pivoting Woofer Baffle
• Two 3” Aluminum Cone Woofers with Phasing Cones
• Pivoting 1” Aluminum Dome Tweeter
• Front mounted switche allow for up to ±3dB of Treble adjustment
• Efficiency: 86dB 1W/1m
• Power Recommendations: 5 - 60 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 78Hz - 20kHz ±3dB
• Dimensions: H 25.4 x W 14.6 x D 7.3 cm
• Wall Cut-out Dimensions: H 22.9 x W 12.1 cm
Product
AIM LCR3 Three
Article
09-7868
AIM LCR3 One
• Pivoting Woofer Baffle
• Two 3” Injection Molded Graphite Cone Woofers with Phasing Cones
• Pivoting 1” Silk Dome Tweeter
• Efficiency: 85dB 1W/1m
• Power Recommendations: 5 - 60 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 80Hz - 20kHz ±3dB
• Dimensions: H 25.4 x W 14.6 x D 7.3 cm
• Wall Cut-out Dimensions: H 22.9 x W 12.1 cm
Product
AIM LCR3 One
Article
09-7869
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
Dipole In-Wall Home Theater Speaker
Creating a diffused sound field for rear channel surround has become critical to mimic the array of
speakers along the side and back walls of a traditional movie theater. The new AIM Cinema DiPole
does this in a very elegant format.
Each speaker has two 51⁄4 inch drivers and two 1-inch dome tweeters placed 50 degrees off-axis from
each other. Two switchable settings allow the speaker to operate in either a bipole configuration or
in opposite polarity as a dipole to create the desired null at the listening area. In the second position
there is a circuit to boost bass response, which would normally be lost in the cancellation through the
opposite output from the two woofers.
The drivers are mounted in a baffle that has been carefully molded with graceful curves and angles
to avoid any sharp reflections. The result is a piece of acoustic artwork that is impressive in both its
style and its performance. Available in three models, the AIM Cinema DiPole is destined to become
a classic.
AIM Dipole
Dipole In-Wall Home Theater Speaker
34 - SpeakerCraft Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AIM Dipole In-Wall Speakers
AIM Dipole Five
• Two 51⁄4” Kevlar Cone Woofers with Phasing Cones
• Two Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted Bipole, Diole, QFX, Beam Stiring, Bass and Treble adjustment Switches
• Efficiency: Bipole 89dB 1W/1m / Dipole 82dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 48Hz - 20kHz ±3dB
• Dimensions: H 44.3 x W 23.5 x D 8.3 cm
• Wall Cut-out Dimensions: H 39.8 x W 19.1 cm
Product
AIM Dipole Five
Article
09-7870
AIM Dipole Three
• Two 51⁄4” Aluminum Cone Woofers with Phasing Cones
• Two Pivoting 1” Aluminum Dome Tweeter
• Front mounted Bipole, Diole, QFX, Bass and Treble adjustment Switches
• Efficiency: Bipole 90dB 1W/1m / Dipole 82dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 50Hz - 20kHz ±3dB
• Dimensions: H 44.3 x W 23.5 x D 8.3 cm
• Wall Cut-out Dimensions: H 39.8 x W 19.1 cm
Product
AIM Dipole Three
Article
09-7871
AIM Dipole One
• Two 51⁄4” Injection Molded Graphite Cone Woofers with Phasing Cones
• Two Pivoting 1” Silk Dome Tweeter
• Front mounted Bipole, Diole, QFX adjustment Switches
• Efficiency: Bipole 89dB 1W/1m / Dipole 81dB 1W/1m
• Power Recommendations: 5 - 80 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 55Hz - 20kHz ±3dB
• Dimensions: H 44.3 x W 23.5 x D 8.3 cm
• Wall Cut-out Dimensions: H 39.8 x W 19.1 cm
Product
AIM Dipole One
Article
09-7872
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AccuFit Shallow Speaker
The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions
in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall,
unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of
sound enclosures to address many of these situations but there are space restrictions that negate
this option.
The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have
the proper amount of air space to deliver the best sound performance regardless of the installation
environment. This new line of technically advanced speakers will fit just about any installation
uc
t
application.
36 - SpeakerCraft pr
ew
N
Shallow speakers
od
AccuFit IW7
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AccuFit IW7 In-Wall Speakers
AccuFit IW7 Three
• 7” Aluminum Cone Woofer
• 1” Pivoting Aluminum Dome Tweeter
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 55Hz - 20kHz ±3dB
• Dimensions: H 36.8 x W 25.1 x D 7 cm
pr
09-7873
ew
AccuFit IW7 Three
Article
N
Product
od
uc
t
• Wall Cut-out Dimensions: H 32.4 x W 20.6 cm
AccuFit IW7 One
• 7” Injection Molded Graphite Cone Woofer
• 3⁄4” Pivoting Silk Dome Tweeter
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 90 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 60Hz - 20kHz ±3dB
• Dimensions: H 36.8 x W 25.1 x D 7 cm
pr
09-7874
ew
AccuFit IW7 One
Article
N
Product
od
uc
t
• Wall Cut-out Dimensions: H 32.4 x W 20.6 cm
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
Pivotating In-Wall Speaker
Building on the succes of the AIM LCR, the AIM7 MT series is also an in-wall speaker with a fully
pivoting baffle allowing the installer to toe-in the left and right speaker for better stereo imaging.
They feature seven-inch woofers , a substantial improvement over the six-inch driver in the original
MT6, as well as an offset, independently pivoting tweeter. They play louder, deeper and with more
authority than the MT6 and at the exact same price.
AIM7 MT
Pivotating In-Wall Speaker
38 - SpeakerCraft Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AIM7 MT In-Wall Speakers
AIM7 MT Four
• 7” Aluminum/Magnesium Cone Woofer with Dual Voice Coil and Rubber Surround
• Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front Mounted Switches Allow for up to ± 3dB of Bass and Treble Equalization
• Timbre-Matched to AIM8/7 Four, CRS8/6 Four and MT8 Four
• Efficiency: 92dB 1W/1m
• Power Recommendations: 5 - 150 watts (undistorted)
• Impedance: 8/6Ω depending on switch position
• Frequency Response: 37Hz - 20kHz ±3dB
• Dimensions: H 36.9 x W 25.1 x D 10.2 cm
• Wall Cut-out Dimensions: H 33.1 x W 21 cm
Product
AIM7 MT Four
Article
09-7418
AIM7 MT Three
• 7” Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround
• Pivot ing 1” Aluminum Dome Tweeter
• Front Mounted Switches Allow for up to ± 3dB of Bass and Treble adjustment
• Timbre-Matched to AIM8/7 Three, TIME Three, CRS8/6 Three, MT8 Three and AIM LCR 3
• Efficiency: 91dB 1W/1m
• Power Recommendations: 5 - 125 watts (undistorted)
• Impedance: 8/6Ω depending on switch position
• Frequency Response: 40Hz - 20kHz ±3dB
• Dimensions: H 36.9 x W 25.1 x D 10.2 cm
• Wall Cut-out Dimensions: H 33.1 x W 21 cm
Product
AIM7 MT Three
Article
09-7419
AIM7 MT Two
• 7” Glass Composite Cone Woofer with Rubber Surround
• Pivoting 1” Silk Dome Tweeter
• Front mounted Switch allows for up to ± 3dB of Treble adjustment
• Timbre-Matched to AIM8 Two, CRS8 Two, AIM7 Two and MT8 Two
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 125 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±3dB
• Dimensions: H 36.9 x W 25.1 x D 10.2 cm
• Wall Cut-out Dimensions: H 33.1 x W 21 cm
Product
AIM7 MT Two
Article
09-7420
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
AIM7 MT In-Wall Speakers
AIM7 MT One
• 7” Polypropylene Cone Woofer with Rubber Surround
• Pivoting 1” Silk Dome Tweeter
• Timbre-Matched to AIM8 One, TIME One, CRS8/6 One, CSS6 One, MT8 One and AIM LCR 1
• Efficiency: 92dB 1W/1m
• Power Recommendations : 5 - 100 watts (undistorted)
• Impedance : 8Ω
• Frequency Response: 40Hz - 20kHz ±3dB
• Dimensions : H 36.9 x W 25.1 x D 10.2 cm
• Wall Cut-out Dimensions : H 33.1 x W 21 cm
40 - SpeakerCraft Product
AIM7 MT One
Article
09-7421
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
HIGH FIDELITY
SpeakerCraft created the MT series, the first truly high-end in-wall speaker. Using inwall speakers
for critical listening or as front channels in a home theater system was not a thought that many had
considered. In developing the series, SpeakerCraft engineers virtually re-invented the in-wall speaker,
solving the many problems that have traditionally been inherent in their design.
A very unique innovation in the series is the “Uni-Pivot” midrange and tweeter unit. It holds both a
tweeter and midrange that can be directed together as one toward the sweet spot in any listening
area. The “Uni-Pivot” design smooths out the frequency response and crossover transition. We have
won awards with this design and were not only the first to incorporate the world’s first pivoting
midrange/tweeter array, but it still remains the best sounding today.
On some models, additional refinement of frequency balance can be achieved by pressing the front
mounted buttons. The bass, midrange and treble on these models can be independently adjusted up
to 6dB, allowing the listener to fine-tune the speaker to any environment.
MT In-Wall Speakers
Mirror Image Technology, In-Wall Speaker Systems
AcoustaCellTM System
In developing the 8-inch MT series, we didn’t stop with the speaker. We realized the biggest problem
with in-wall speakers is not the speaker, it’s the wall. No other manufacturer has ever addressed
the problem of the wall cavity so thoroughly as SpeakerCraft. The end result was the creation of a
precision sonic chamber designed to enhance the speakers.
AcoustaCellTM, the revolutionary wall dampening system, is a blend of sound absorbing materials
that blocks sound passing through drywall, dampens drywall resonance, stops standing waves, blocks
Helmholtz resonance and dissipates back waves.
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
8” MT In-Wall Speakers
MT8 Four
• Include AcoustaCellTM 8 System
• 8” Aluminum/Magnesium Cone Woofer with Phasing Dome
• 21⁄2” Aluminum/Magnesium Dome Uni-Pivot Midrange
• 1” Aluminum/Magnesium Dome Uni-Pivot Tweeter
• Front mounted buttons allow for up to ±3dB of Bass, Midrange & Treble adjustment
• Timbre-Matched to AIM8 Four, CRS8 Four, CRS Four and MT Four
• Efficiency : 90dB 1W/1m
• Power Recommendations : 5 - 200 watts (undistorted)
• Impedance : 8/6/4Ω depending on button settings
• Frequency Response : 38Hz - 22kHz ±2dB
• Dimensions : H 42.2 x W 27 x D 10 cm
• Wall Cut-out Dimensions : H 38.5 x W 23.2 cm
Product
MT8 Four
Article
09-7094
MT8 Three
• Include AcoustaCellTM 8 System
• 8” Aluminum Cone Woofer
• 21⁄2” Aluminum Dome Uni-Pivot Midrange
• 1” Aluminum Dome Uni-Pivot Tweeter
• Front mounted buttons allow for up to ±3dB of Bass, Midrange & Treble adjustment
• Timbre-Matched to AIM8 Three, CRS8 Three, CRS Three and MT Three
• Efficiency : 90dB 1W/1m
• Power Recommendations : 5 - 200 watts (undistorted)
• Impedance : 8/6/4Ω depending on button settings
• Frequency Response : 39Hz - 20kHz ±2dB
• Dimensions : H 42.2 x W 27 x D 9.6 cm
• Wall Cut-out Dimensions : H 38.5 x W 23.2 cm
42 - SpeakerCraft Product
MT8 Three
Article
09-7095
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
8” MT In-Wall Speakers
MT8 Two
• Does Not Include AcoustaCellTM 8 System
• 8” Glass Composite Cone Woofer
• 21⁄2” Glass Composite Cone Uni-Pivot Midrange
• 1” Glass Composite Dome Uni-Pivot Tweeter
• Front mounted buttons allow for up to ±3dB of Bass, Midrange & Treble adjustment
• Timbre-Matched to AIM8 Two, CRS8 Two, CRS Two and MT Two
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 125 watts (undistorted)
• Impedance: 8/6/4Ω depending on button settings
• Frequency Response: 40Hz - 20kHz ±2dB
• Dimensions: H 42.2 x W 27 x D 9.6 cm
• Wall Cut-out Dimensions: H 38.5 x W 23.2 cm
Product
MT8 Two
Article
09-7096
MT8 One
• Does Not Include AcoustaCellTM 8 System
• 8” Polypropylene Cone Woofer
• 21⁄2” Polypropylene Cone Uni-Pivot Midrange
• 3⁄4”
Treated Silk Dome Uni-Pivot Tweeter
• Timbre-Matched to AIM8 One, CRS8 One, CRS One and MT One
• Efficiency: 90dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±2dB
• Dimensions: H 42.2 x W 27 x D 10.2 cm
• Wall Cut-out Dimensions: H 38.5 x W 23.2 cm
Product
MT8 One
Article
09-7097
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
6” MT In-Wall Speakers
MT6 Four
• 61⁄2” Aluminum/Magnesium Cone Woofer with Dual Voice Coil and Filleted Rubber Surround
• Pivoting 1” Aluminum/Magnesium Dome Tweeter
• Front mounted buttons allow for up to ±3dB of Bass and Treble adjustment
• Timbre-Matched to AIM8 Four, CRS8 Four, CRS Four and MT Four
• Efficiency: 90dB 1W/1m
• Power Recommendations : 5 - 150 watts (undistorted)
• Impedance : 8/6/4Ω depending on switch position
• Frequency Response: 37Hz - 20kHz ±2dB
• Dimensions : H 31.1 x W 20.8 x D 8.1 cm
• Wall Cut-out Dimensions : H 27.3 x W 17.2 cm
Product
MT Four
Article
09-3511
MT6 Three
• 61⁄2” Aluminum Cone Woofer with Dual Voice Coil and Filleted Rubber Surround
• Pivoting 1” Aluminum Dome Tweeter
• Front mounted buttons allow for up to ±3dB of Bass and Treble adjustment
• Timbre-Matched to AIM8 Three, CRS8 Three, CRS Three and MT Three
• Efficiency : 90dB 1W/1m
• Power Recommendations : 5 - 125 watts (undistorted)
• Impedance : 8/6/4 Ω depending on switch position
• Frequency Response : 40Hz - 20kHz ±2dB
• Dimensions : H 31.1 x W 20.8 x D 8 cm
• Wall Cut-out Dimensions : H 27.3 x W 17.2 cm
Product
MT Three
Article
09-3512
MT6 Two
• 61⁄2” Glass Composite Cone Woofer with Filleted Rubber Surround
• Pivoting 1” Silk Dome Tweeter
• Front mounted buttons allow for up to ±3dB of Treble adjustment
• Timbre-Matched to AIM8 Two, CRS8 Two, CRS Two and MT Two
• Efficiency : 92dB 1W/1m
• Power Recommendations : 5 - 120 watts (undistorted)
• Impedance : 8Ω
• Frequency Response : 40Hz - 20kHz ±2dB
• Dimensions : H 31.1 x W 20.8 x D 7.8 cm
• Wall Cut-out Dimensions : H 27.3 x W 17.2 cm
44 - SpeakerCraft Product
MT Two
Article
09-3513
Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
6” MT In-Wall Speakers
MT6 One
• 61⁄2” Polypropylene Cone Woofer with Filleted Rubber Surround
• Pivoting 1” Silk Dome Tweeter
• Timbre-Matched to AIM8 One, CRS8 One, CRS One and MT8 one
• Efficiency: 92dB 1W/1m
• Power Recommendations: 5 - 100 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 40Hz - 20kHz ±2 dB
• Dimensions: H 31.1 x W 20.8 x D 7.8 cm
• Wall Cut-out Dimensions: H 27.3 x W 17.2 cm
Product
MT One
Article
09-3514
MT8 Four
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
Satellite Speaker
There are certain situations where the use of in-wall or in-ceiling speakers are simply not feasible. The
Multiple Dwelling Unit or MDU is a perfect example. Sound transference into an adjoining unit, code
restrictions that prevent cutting into the wall or ceiling surface or the use of concrete or brick in the
construction process are all reasons that make a flush-mounted speaker unworkable.
The SpeakerCraft MDU speaker allows for great sound reproduction in these situations with an
elegant and functional solution. The speaker is mounted to the ceiling via a standard J-box or
attached directly to the ceiling joist. The multi-pivot bracket allows the speaker to be aimed at
the listening area from any position in the room. The ported cabinet houses a 4 inch woofer and
a 3/4 inch dome tweeter that deliver a smooth and open sonic presentation. Matched to any of our
freestanding subwoofers, the MDU will fill any room in a condo, town home or apartment with an
incredible musical experience.
AIM MDU
Pivotating Satellite Speaker
46 - SpeakerCraft Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker
AIM MDU Box Speakers
AIM MDU
• 4” Injection Molded Graphite Cone Woofer
• 1” Silk Dome Tweeter
• Efficiency: 87dB 1W/1m
• Power Recommendations: 5 - 60 watts (undistorted)
• Impedance: 8Ω
• Frequency Response: 78Hz - 20kHz ±3dB
• Dimensions: H 12.2 x W 18.6 x D 11 cm
• Height with the multi-pivot bracket: H 22.7 cm
Product
AIM MDU
Article
09-6515
Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD
Order form
quantity
article number
description
price
Total :
Authorized dealer
client nb.
company
tel
contact
fax
address
mobile
zip/ city
e-mail
web site
VAT nb.
date and signature
tel +41 21 922 8000 •
fax +41 21 922 8002
• [email protected]
•
www.techsupply.ch
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement