Vi2300A Mini Ethernet Extender over UTP Installation

Add to My manuals
2 Pages

advertisement

Vi2300A Mini Ethernet Extender over UTP Installation | Manualzz

Vi2300A Mini Ethernet Extender over UTP Installation Manual

The MaxiiCopper Model Vi2300A Mini is a revolutionary data transmission device that extends full-duplex high-speed Ethernet over existing UTP infrastructures. It extends 10BaseT signals up to 3,000 feet (914m) and

100BaseT up to 2,100 feet (640m). It employs MaxiiCopper innovative and unique Ethernet extension technology that is designed to take full advantage of high-bandwidth networking cables and maintain a full-duplex of 10 or 100 Mb/s Ethernet connection up to the maximum range with minimum transmission error and latency.

The Vi2300A can connect multiple remote network devices, such as

Mega-pixel IP cameras or VoIP to a central LAN switching fabric with ease.

Its dual-rate capability feature provides an easy way to balance the best possible network throughput and long-reach distance design. The Vi2300A is a transceiver device that needs to be deployed on the camera side. It can be used in conjunction with a Vi2301A or Vi25xx Extended Midspan. It is equipped with LEDs to provide link status and data rate. No IP setting or configurations are required and it is completely transparent to the corporate

IP network and higher layer protocols. The UTP cable needs to be point to point without any branches. Multiple segments can be joined together using

UTP couplers.

IP Camera

Ethernet Extenders

WARNING! - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. This apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on the apparatus.

WARNING! - This apparatus is a Class I product. This product must be connected to a mains socket outlet thru an AC to DC Power supply.

WARNING! - The main plug is used as the disconnect device and should remain readily operable.

.

Application Drawing

Cat-5

Vi2300A

Important Safety Warning

- Read these instructions.

- Keep these instructions.

- Follow all instructions.

- Heed all warnings.

- Do not use this apparatus near water.

- Clean only with a dry cloth.

- Install in accordance with the manufacturer’s instructions.

- This installation should be made by a qualified service person and should

conform to all local codes.

- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage

wiring.

- To reduce the risk of fire or electrical shock, do not expose these products

to rain, moisture, dripping or splashing.

- No objects filled with liquids, such as vases, shall be placed on Vigitron

equipment.

- DO NOT install the unit in a place where the operating ambient tempera

ture exceeds 75° C.

- Make sure that the external power supply output voltage is in the recom

mended range.

- Do not install near any heat sources such as radiators, heat registers,

stoves or other apparatus (including DVRs) that produce heat.

- Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long

periods of time.

- Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as a power

supply cord or plug is damaged, liquid has been spilled, or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

- The mains plug is used as the disconnect device and shall remain readily

operable.

CAUTION

NVR

Data

Network Switch

Cat-5

IP Camera-end Installation

Vi2301A

- If you like to power the unit using a local power supply, connect a 12VDC

power supply to the power connector of the Vi2300A. A power adapter

connector is provided to simplify connection.

- When using PoE, the camera has to be powered by PoE also.

- Connect the IP camera RJ45 connector to the “Standard Ethernet” port

of Vi2300A using a standard Cat5/6 cable of maximum 100 m in length.

- Connect one end of the long UTP cable to the “Extended Ethernet” RJ45

connector of Vi2300A.

The link LED on the 10/100 connector should be “ON” to indicate proper connection between the camera and Vi2300A.

Ethernet Switch/NVR-end Installation

- If you like to power the unit using a local power supply, connect a 12VDC

power supply to the power connector of the Vi2301A. A power adapter

connector is provided to simplify connection.

- When using PoE, the camera has to be powered by PoE also.

- Connect the RJ45 connector of the Ethernet switch to the “Standard

Ethernet” port of Vi2301A using a standard Cat5/6 cable of maximum

328 feet (100 m) in length.

- Connect one end of the long UTP cable to the “Extended Ethernet” RJ45

connector of Vi2301A.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER. NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The link LED on the 10/100 Ethernet connector should be “ON” to indicate proper connection between the switch and Vi2301A. While the Link LED,

Orange for 100BaseT and Green for 10BaseT, in a steady state will indicate confirmed connection between extenders.

The Smart Choice for Transmission Solutions

www.vigitron.com

Technical Specifications*

Electrical

Ethernet Interface Standard 10/100BaseT

Ethernet Rate

UTP**

Auto selectable 10/100 Mb/s

100 Ohm, 3000 feet (914 m) at 10BaseT

2,100 feet (640 m) at 100BaseT

Connectors Ethernet Interface RJ-45 Connector

Extended Interface RJ-45 Connector

Power IEC380-8 inlet

Environmental

Humidity 0 to 95%, non-condensing

Operating: -40°C to +75°C

Storage: -40°C to +80°C

Temperature

Mechanical

Dimensions

Weight

0.975in x 1.76in x 2.2 in. (HxWxL)

24.7 x 44.7 x 55.5 mm

0.15 lbs., 67 g

Material Aluminum

Accessories

12 VDC with non-polarized connector (Optional)

*Specifications subject to change without notice.

**Distance figures are obtained using in house testing mirroring installations. Factors such as cabling, connections,

use of power and environmental conditions may affect actual distances and should be taken into consideration.

RoHS

Drawings

TM

Vi2300

Ethernet & PoE Extender over UTP

Power

2"

Top View

Made in U.S.A.

Status LEDs

10/100 Traffic Link

LED Name

Power

Color

RED

Status

OFF

ON

Function

Power is OFF

Power is ON

Traffic

(Extended Side) YELLOW

10/100 BaseT

(Extended Side) ORANGE

OFF No Traffic

FLASHING Traffic

ON

ON

Connection is OK, 10BaseT Mode

Connection is OK, 100BaseT Mode

(Standard Side)

(Standard Side)

OFF No connection

FLASHING Connection is OK with Traffic

OFF

ON

No connection

Connection is OK

Limited Lifetime Warranty

Vigitron, Inc. warrants that all Vigitron products (“Product”), if used in accordance with these instructions, will be free of defects in material and workmanship for lifetime defined as the duration period of time until product end of life is announcement. After which Vigitron will continue to provide warranty services for a period of 3 years. Period covering valid warranty will be determined by proof of purchase in the form of an invoice from an authorized Vigitron dealer.

Warranty will only be provided for as long as the original end user purchaser owns the product. Warranty is not transferrable. At Vigitron's option, defective product will be repaired, replaced or substituted with a product of equal value. This warranty does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or maintained not conforming to Product manual instructions, has been modified, or serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an approved agent will void this warranty. Vigitron, Inc. shall not under any circumstances be liable to any person for any incidental, indirect or consequential damages, including damages resulting from use or malfunction of the product, loss of profits or revenues or costs of replacement goods. The maximum liability of

Vigitron, Inc. under this warranty is limited to the original purchase price of the

Product only.

0.97"

Left View Right View

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • [email protected] • www.vigitron.com

© Copyright 2013 Vigitron, Inc.

Manual_Vi2301A

advertisement

Related manuals

Download PDF

advertisement