Kathrein 2007
790–6000
catalogue 2007
790 – 6000 MHz
Base Station Antennas
for Mobile Communications
Photo on title page: Integration of active components in one antenna radome.
Catalogue Issue 01/2007
All data published in previous catalog issues hereby becomes invalid.
We reserve the right to make alterations in accordance with the requirements of our customers,
therefore for binding datas please check valid datasheets!
Please note:
As a result of more stringent legal regulations
and judgements regarding product liability, we are
obliged to point out certain risks that may arise
when products are used under extraordinary
operating conditions.
The mechanical design is based on the environmental
conditions as stipulated in ETS 300 019-1-4, which
include the static mechanical load imposed on an
antenna by wind at maximum velocity.
Extraordinary operating conditions, such as heavy
icing or exceptional dynamic stress (e.g. strain caused
by oscillating support structures), may result in the
breakage of an antenna or even cause it to fall to
the ground.
These facts must be considered during the site planning
process.
The details given in our data sheets have to be
followed carefully when installing the antennas and
accessories.
In addition, please use our information brochure
about mounting configurations.
The installation team must be properly qualified
and also be familiar with the relevant national safety
regulations.
“Quality leads the way”
As the world’s oldest and largest antenna manufacturer, we live up to claim “Quality
leads the way” on a daily basis. One of the fundamental principies is to always be on
the lookout for the best solution for our customers.
Our quality assurance system and our environmental management system apply to the
entire company and are certified by TÜV according to EN ISO 9001 and EN ISO 14001.
Internet: http://www.kathrein.de
KATHREIN-Werke KG . Phone +49 80 31 184-0 . Fax +49 80 31 184-494
Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . D-83004 Rosenheim . Germany
GSM 900
GSM-R
GSM 850
CDMA 800
XPol
VPol
XPol
GSM 1800
GSM 1900
PCS
XXPol Dual-band
VPol
XPol Multi-band /
Tri-Sector Pipe Antennas
XXPol 2-Multi-band
UMTS
XXPol Dual-band
XXXPol Triple-band
VPol Single-/Multi-band
XPol
WiMax 3.3 – 3.8 GHz
VPol
Omni
VPol
Indoor
VPol
RET
Electrical Accessories
Mechanical Accessories
Remote Electrical Tilt-System
Splitters / Tappers
Filter Products
Clamps, Downtilt Kits, ...
3
International Representatives
A current list of Kathrein’s International Representatives
can be found on our homepage
www.kathrein.de
The same list can also be found on the back of our catalogue.
4
List of available Catalogues for
Mobile Communication Antennas
and Accessories
790 – 2500 MHz Base Station Antennas
for Mobile Communications
27 – 512 MHz Base Station Antennas
for Mobile Communiations
Ground-to-Air Communication Antennas
Antennas for Trains and Buses
790 – 2500 MHz Filters, Combiners,
Amplifiers for Mobile Communications
68 – 470 MHz Filters, Combiners,
Amplifiers for Mobile Communications
The listed catalogues
are also available on CD-ROM
5
Summary of Types
The articles are listed by type number in numerical order.
Type No.
Page
730 ...
Page
735 ...
Type No.
Page
Type No.
Page
738 449
159 …
739 707
65
730 368
51
735 147
80
738 450
152 …
739 710
65
730 376
54
735 727
48
738 454
179
739 785
163
730 378
56
738 546
228 …
739 854
53
730 382
57
736 ...
738 908
241
739 927
60
730 677
51
736 347
157
730 691
52
736 349
158
739 ...
736 350
155
739 489
89
741 316
68
736 854
55
739 490
61
741 320
69
731 ...
731 651
228
732 ...
741 ...
736 801
210 ...
739 491
61
741 322
72
736 802
210 ...
739 494
62
741 324
74
736 803
210 ...
739 495
62
741 326
70
732 317
239
736 804
210 ...
739 496
63
741 327
73
732 318
239
736 805
210 ...
739 498
63
741 328
75
732 319
239
739 619
17
741 336
76
732 321
239
737 ...
739 620
17
741 344
77
732 322
239
737 190
165
739 622
19
741 573
173
732 327
239
737 303
211
739 623
27
741 622
31
732 689
54
737 304
211
739 624
33
741 623
60
732 691
52
737 305
211
739 630
33
741 717
14
737 306
211
739 632
19
741 785
15
737 307
211
739 633
23
741 790
167
733 ...
733 677
228 ...
737 308
211
739 634
29
741 984
102
733 678
228 ...
737 398
242
739 636
35
741 987
104
733 679
228 ...
737 547
53
739 637
35
741 988
103
733 680
228 ...
737 971
232
739 648
37
741 989
105
733 695
49 ...
737 972
231 …
739 649
41
741 990
106
733 736
49 ...
737 973
231 …
739 650
43
737 974
231 …
739 655
40
742 ...
737 975
231 …
739 658
38
742 033
229
734 ...
6
Type No.
734 304
80
737 976
232
739 660
41
742 034
229
734 318
81
737 978
231 …
739 662
45
742 035
229
734 330
81
739 664
39
742 036
229
734 360
236
738 ...
739 665
42
742 047
78
734 361
236
738 187
164
739 666
46
742 113
238
734 362
236
738 192
156
739 684
24
742 151
71
734 363
236
738 440
244
739 685
32
742 186
101
734 364
236
738 445
139
739 686
36
742 192
140
734 365
236
738 446
139 …
739 695
64
742 196
93
Summary of Types
The articles are listed by type number in numerical order.
Type No.
Page
Type No.
Page
Type No.
Page
Type No.
Page
742 210
88
782 10456
205
800 10426
99
860 10084
199
742 211
91
800 10428
94
860 10090
199
742 213
100
800 10431
166
860 10113
196
742 215
95
800 10046
143
800 10436
147
860 10118
192
742 218
86
800 10111
162
800 10457
150
742 219
87
800 10121
128
800 10465
171
742 222
121
800 10122
129
742 223
123
800 10123
130
850 …
742 224
125
800 10137
174
850 10002
742 225
127
800 10141
14
742 226
120
800 10147
742 233
114
742 234
800 …
K 61 ...
K 61 14 02
48
K 61 14 03
48 ...
228 ...
K 61 14 04
48 ...
850 10003
228 ...
K 61 14 05
48 ...
160 ...
850 10005
190 ...
K 61 33 5
243
800 10173
175
850 10006
230
K 61 33 6
243
115
800 10202
18
850 10007
233
742 235
117
800 10203
26
850 10010
111
K 63 ...
742 236
116
800 10204
34
850 10012
112
K 63 20 62 1
210
742 241
135
800 10207
20
850 10014
240
K 63 20 62 7
210
742 263
237
800 10213
44
850 10015
240
K 63 23 60 01
215
742 264
122
800 10247
92
850 10016
240
K 63 23 60 67
214
742 265
124
800 10248
172
850 10017
240
K 63 23 61 07
214
742 266
126
800 10249
176
K 63 23 61 57
214
742 270
132
800 10251
84
742 271
133
800 10270
109
860 10002
200
K 73 ...
742 272
134
800 10271
110
860 10006
193
K 73 22 67
50
742 290
142
800 10274
161
860 10007
198
K 73 45 64 7
49
742 351
85
800 10292
136
860 10017
212
742 352
118
800 10293
28
860 10018
212
K 75 ...
742 445
141
800 10294
30
860 10019
212
K 75 11 61
153
800 10302
16
860 10020
213
K 75 15 64 1
154
800 10303
25
860 10021
213
782 …
860 …
782 10147
203
800 10304
22
860 10022
213
782 10148
204
800 10305
21
860 10023
215
782 10253
205
800 10314
96
860 10025
191
782 10254
205
800 10360
108
860 10026
193
782 10255
205
800 10368
138
860 10030
201
782 10256
205
800 10375
107
860 10031
202
782 10429
206
800 10390
146
860 10046
197
782 10453
205
800 10414
97
860 10068
194
782 10454
205
800 10424
90
860 10078
199
782 10455
205
800 10425
98
860 10079
199
7
Antenna Designs:
Antenna Families
Harmony of Design and Technology
Omni
A-Panel
C-Panel
F-Panel
Eurocell Panel
8
Directional Antenna Designs:
Special Directional Antennas
For Particular Applications
Antennas for
The distinguishing features of these special versions,
e.g. parabolic panels or log. periodic antennas, are:
– tunnel use
– very small half-power beam width (high gain)
– railway use
– high sidelobe suppression
– micro cells (street use)
– also Dual-band and Multi-band versions
– high gain link for repeaters
– bidirectional horizontal pattern.
LogPer
ParPanel
BiDir
9
Antenna Designs:
Antenna Families / RET-system
Distinguishing features
Design
Compact size and elegant design are the distinguishing features of
Kathrein’s antenna families.
Radome
The radomes cover the internal antenna components. The fiberglass material guarantees optimum performance with regards to stability, strength, UV
resistance, painting and weather protection.
Environmental influences
Kathrein antenna designs are based on fundamental engineering knowledge
and also on our decades of practical experience, during which the various
constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental
conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regards to the following items:
– Low temperature:
–55 °C
– High temperature (dry): +60 °C
Great variety of
half-power beam width,
gain values,
electrical downtilt
According to the antenna type selected, customer can choose from different
half-power beam widths. Gain values up to 22.5 dBi and electrical
downtilts up to 15° for panel antennas are available. Downtilts are either
fixed or adjustable or even controlled by remote electrical tilt system (RET).
Low intermodulation
After many years of experience in the construction of antennas and after
products (typically –150 dBc) intensive research into the effects of intermodulation, we have been able to
optimize the material and technology used for antennas (the given value
refers to 3rd order products measured with 2 carriers of 20 W each).
Multi-band design
Depending on antenna family broad-band, multi-band, dual-band and
triple-band versions can be offered. Therefore the varity of antennas used
can be kept to a minimum.
Excellent grounding
The antennas are DC grounded according EN 50083-1.
Multi-functional
installation hardware
Depending on the type, the antennas are equipped with up to 3 attachment
points. Panels can be wall-mounted without any additional hardware. For
mast-mounting, stainless steel brackets and mechanical downtilt kits are
available. To assist the installation technicians in aligning the panels, an
azimuth adjustment tool can be supplied (see Mechanical Accessories).
MTBF Statement
Traditionally passive components like antennas cannot be well calculated
due to the lack of a sufficient number of components in the MTBF library.
Unfortunately this constraint results in a very inaccurate calculation. Thus
such results are technically questionable and unrealistic.
In essence, antennas are made out of mechnical parts that do not show any
failure rates. Only available failure rates can be calculated into an MTBF
value. Consequently such components cannot be listed in any MTBF library.
Remote Electical Tilt System Kathrein hereby states that RET devices, as far as the functionality and
AISG Compliancy
features are described within the AISG / 3 GPP standard, are compliant with
the standard.
10
Downtilting of Antennas:
Downtilt Possibilities
Mechanical downtilt
For further technical information please see “Mechanical Accessories”,
pages 231 and 239.
Electrical downtilt
Description of the adjustment mechanism (protective cap removed):
1
1
2
2
➀ Adjustment wheel with
twist-lock function.
➁ Downtilt spindle with integrated scale.
➀ Thread for fixing the protective cap or the RCU
(Remote Control Unit).
➁ Gearwheel for RCU power
drive.
To set the downtilt angle
exactly, you must look horizontally at the scale. The
lower edge of the gearwheel
must be used for alignment.
Manual adjustment procedure:
0° – max.°
max.° – 0°
Remove the protective cap.
Set downtilt angle by rotating
the adjustment wheel.
Screw on the protective cap
again.
For antennas without RET, the interface looks
different. In this case you just have to rotate the
adjustment wheel in order to set the downtilt.
Remote Electrical Tilt (RET) For further technical information please see “RET”, page 182...
11
Kathrein Antennas
Product Description (Type)
XXPol A-Panel 870–960/1710–1880 C 65°/ 60° 17/18dBi 2°–8°T/2°T
Polarization(s):
(X) Dual +45°/ –45°
(V) Vertical
Antenna Family
Frequency Range(s)
Integrated Combiner
Horizontal
Half-power Beam Width(s)
Gain Value(s)
Variable / Fixed Electrical Tilt(s)
12
GSM 900
XPol
Summary – Directional Antennas
Dual Polarization + 45°/ –45°
GSM 900 / GSM-R / GSM 850 / CDMA 800
Dual Polarization + 45°/ –45°
Type
Type No.
Height
[mm]
741 717
800 10141
741 785
800 10302
656
1296
2580
2254
XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol C-Panel
870–960
806–960
870–960
806–960
30°
30°
30°
33°
15.5dBi
18.5dBi
21dBi
21dBi
XPol A-Panel
806–960
65°
9dBi
739 619
XPol A-Panel
806–960
65°
12.5dBi
XPol C-Panel
XPol A-Panel
XPol A-Panel
XPol C-Panel
XPol C-Panel
XPol C-Panel
XPol A-Panel
XPol A-Panel
XPol C-Panel
806–960
806–960
806–960
806–960
806–960
806–960
806–960
806–960
806–960
65°
65°
65°
65°
65°
65°
65°
65°
65°
15.5dBi
15.5dBi
15dBi
15dBi
17.5dBi
16.3dBi
15dBi
15dBi
15dBi
XPol C-Panel
XPol A-Panel
XPol C-Panel
XPol A-Panel
XPol C-Panel
XPol A-Panel
XPol A-Panel
806–960
806–960
806–960
806–960
806–960
824–960
824–960
65°
65°
65°
65°
65°
65°
65°
17dBi
17dBi
17dBi
17dBi
17dBi
17dBi
16.5dBi
XPol A-Panel
XPol A-Panel
XPol C-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel
870–960
806–960
806–960
806–960
806–960
806–960
65°
65°
65°
65°
65°
65°
XPol A-Panel
XPol A-Panel
XPol A-Panel
806–960
806–960
824–960
XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol C-Panel
XPol A-Panel
XPol A-Panel
Connector
position
Page
bottom
bottom
bottom
rearside
14
14
15
16
256
bottom or top
17
739 620
656
bottom or top
17
6°T
6°T
0°–8°T
0°–10°T
12°T
0°–14°T
0°–14°T
800 10202
739 622
739 632
800 10207
800 10305
800 10304
739 633
739 684
800 10303
1294
1296
1296
1294
2254
1694
1296
1296
1294
bottom
bottom or top
bottom
bottom
rearside
rearside
bottom
bottom
rearside
18
19
19
20
21
22
23
24
25
3°T
6°T
6°T
9°T
0°–10°T
800 10203
739 623
800 10293
739 634
800 10294
741 622
739 685
1934
1936
1934
1936
1934
1936
1996
rearside
bottom or top
rearside
bottom
rearside
bottom
bottom
26
27
28
29
30
31
32
18dBi
18dBi
18dBi
18dBi
18dBi
17.5dBi
6°T
9°T
0°–7°T
739 630
739 624
800 10204
739 636
739 637
739 686
2580
2580
2254
2580
2580
2580
bottom or top
bottom or top
rearside
bottom
bottom
bottom
33
33
34
35
35
36
88°
88°
88°
13.5dBi
14dBi
13.5dBi
6°T
0°–14°T
739 648
739 658
739 664
1296
1296
1296
bottom or top
bottom
bottom
37
38
39
870–960
806–960
806–960
806–960
90°
88°
88°
88°
15.5dBi
15.5dBi
15.5dBi
15dBi
6°T
0°–10°T
739
739
739
739
1936
1936
1936
1996
bottom or top
bottom or top
bottom
bottom
40
41
41
42
806–960
806–960
806–960
806–960
88°
88°
88°
88°
17dBi
17dBi
17dBi
16dBi
2580
2254
2580
2580
bottom or top
rearside
bottom
bottom
43
44
45
46
6°T
0°–7°T
655
649
660
665
739 650
800 10213
739 662
739 666
13
800/900
X
30°
XPol A-Panel 870–960 30° 15.5dBi
Type No.
741 717
Frequency range
870 – 960 MHz
Polarization
30°
+45°, –45°
Gain
2 x 15.5 dBi
Horizontal:
Vertical:
30°
27°
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
3
dB
10
Half-power beam width
Copolar +45°/ –45°
0
Horizontal Pattern
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
27°
2 x 7-16 female
Connector position
10
Bottom
3
Weight
dB
Input
13 kg
0
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
330 N / 60 N / 470 N
Max. wind velocity
200 km/h
Height/width/depth
656 / 560 / 116 mm
Vertical Pattern
800/900
–45°
800/900
+45°
7-16
7-16
XPol A-Panel 806–960 30° 18.5dBi
800 10141
Frequency range
806–960
806 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 18 dBi
2 x 18.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
31°
15°
Horizontal:
Vertical:
Front-to-back ratio, copolar
> 25 dB
> 29 dB
Isolation
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
29°
14°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
10
3
0
Horizontal Pattern
14°
10
2 x 7-16 female
Bottom
22 kg
Frontal / Lateral / Rearside:
680 N / 130 N / 970 N
Max. wind velocity
200 km/h
Height/width/depth
1296 / 560 / 116 mm
14
29°
dB
Type No.
3
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 227)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
870 – 960
X
30°
XPol A-Panel 870–960 30° 21dBi
Type No.
741 785
Frequency range
870 – 960 MHz
Polarization
Gain
30°
+45°, –45°
2 x 21 dBi
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
30°
7°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
Input
Connector position
2 x 7-16 female
3
0
Horizontal Pattern
7°
10
Bottom
3
Weight
dB
Horizontal:
Vertical:
dB
10
Half-power beam width
Copolar +45°/ –45°
40 kg
0
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
1460 N / 280 N / 2090 N
Max. wind velocity
200 km/h
Height/width/depth
2580 / 560 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 227)
Vertical Pattern
870–960
–45°
870–960
+45°
7-16
7-16
15
806 – 960
X
33°
0°
XPol C-Panel 806–960 33° 21dBi 0°T
800 10302
Type No.
Frequency range
Polarization
Gain
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
+45°, –45°
2 x 20.2 dBi
2 x 20.4 dBi
2 x 20.8 dBi
Horizontal: 34°
Vertical:
8.5°
Horizontal: 33°
Vertical:
8.2°
Horizontal: 30°
Vertical:
7.5°
Sidelobe suppression for:
first sidelobe above horizon
sector 0°– 30° above horizon
> 15 dB
> 15 dB
> 15 dB
> 15 dB
> 15 dB
> 15 dB
Front-to-back ratio, copolar
> 24 dB
> 24 dB
> 24 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
> 25 dB
> 25 dB
> 25 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Half-power beam width
Copolar +45°/ –45°
Crosspolar ratio
Maindirection
0°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
52°
30°
7.5°
10
3
3
dB
dB
10
0
0
Horizontal Pattern
Vertical Pattern
824 – 894 MHz: +45°/ –45° Polarization
56°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
33°
8.2°
10
3
3
dB
dB
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern
Input
806 – 866 MHz: +45°/ –45° Polarization
Connector position
Weight
Wind load
58°
34°
8.5°
10
0
Horizontal Pattern
3
dB
3
16
Max. wind velocity
10
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
0
Packing size
Height/width/depth
2 x 7-16 female
Rearside, pointing downwards
30 kg
Frontal:
1275 N (at 150 km/h)
Lateral:
260 N (at 150 km/h)
Rearside: 1750 N (at 150 km/h)
200 km/h
2416 x 564 x 204 mm
2254 / 527 / 99 mm
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 227)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
65°
XPol A-Panel 806–960 65° 9dBi
739 619
Frequency range
806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 8.5 dBi
2 x 9 dBi
Horizontal:
Vertical:
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
70°
70°
Horizontal:
Vertical:
10
65°
68°
> 27 dB
> 27 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Isolation
0
Horizontal Pattern
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
68°
10
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
350 W (at 50 °C ambient temperature)
3
Input
2 x 7-16 female
Connector position
0
Vertical Pattern
Bottom or top
Weight
Wind load (at 150 km/h)
3
dB
Half-power beam width
Copolar +45°/ –45°
65°
125°
806–960
dB
Type No.
3 kg
Frontal / Lateral / Rearside:
40 N / 25 N / 90 N
Max. wind velocity
200 km/h
Height/width/depth
256 / 262 / 116 mm
806–960
–45°
806–960
+45°
7-16
7-16
XPol A-Panel 806–960 65° 12.5dBi
739 620
Frequency range
120°
806–960
806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12 dBi
2 x 12.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
68°
29°
Horizontal:
Vertical:
65°
27°
65°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
Connector position
Weight
Wind load (at 150 km/h)
27°
10
2 x 7-16 female
Bottom or top
6 kg
Frontal / Lateral / Rearside:
110 N / 60 N / 240 N
Max. wind velocity
200 km/h
Height/width/depth
656 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
3
dB
Input
Horizontal Pattern
0
Vertical Pattern
17
806 – 960
X
65°
0°
XPol C-Panel 806–960 65° 15.5dBi 0°T
800 10202
Type No.
Frequency range
Polarization
Gain
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
+45°, –45°
2 x 14.7 dBi
2 x 15 dBi
Horizontal: 67°
Vertical:
15.5°
Horizontal: 66°
Vertical:
14.8°
Sidelobe suppression for:
first sidelobe above horizon
sector 0°– 30° above horizon
> 15 dB
> 15 dB
> 15 dB
> 15 dB
> 14 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
> 20 dB
> 19 dB
> 11 dB
> 20 dB
> 19 dB
> 11 dB
> 20 dB
> 20 dB
> 11 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.4
< 1.3
Half-power beam width
Copolar +45°/ –45°
Crosspolar ratio
Maindirection
Sector
Sector
0°
±30°
±60°
2 x 15.3 dBi
Horizontal:
Vertical:
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
64°
14°
880 – 960 MHz: +45°/ –45° Polarization
120°
64°
14°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
824 – 894 MHz: +45°/ –45° Polarization
124°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
66°
14.8°
10
3
dB
3
dB
10
0
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern
Input
806 – 866 MHz: +45°/ –45° Polarization
2 x 7-16 female
Connector position
Bottom
Weight
127°
Wind load
67°
15.5°
3
Max. wind velocity
10
3
Packing size
dB
10
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
0
Height/width/depth
0
Horizontal Pattern
18
7.5 kg
Frontal:
Lateral:
Rearside:
220 N (at 150 km/h)
140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h
1436 x 292 x 138 mm
1294 / 259 / 99 mm
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
65°
XPol A-Panel 806–960 65° 15.5dBi
739 622
Frequency range
806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
65°
120°
806–960
68°
16°
Horizontal:
Vertical:
65°
15°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
Horizontal Pattern
50 Ω
VSWR
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Connector position
3
Bottom or top
Weight
Wind load (at 150 km/h)
10
2 x 7-16 female
dB
Input
15°
0
11 kg
Vertical Pattern
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
806–960
–45°
806–960
+45°
7-16
7-16
XPol A-Panel 806–960 65° 15dBi 6°T
739 632
Frequency range
120°
806–960
806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
68°
16°
Horizontal:
Vertical:
65°
15°
65°
10
3
dB
Type No.
0
6°, fixed
6°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
Horizontal Pattern
15°
10
3
2 x 7-16 female
Bottom
dB
Electrical tilt
0
Vertical Pattern
6° electrical downtilt
11 kg
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
19
806 – 960
X
65°
6°
XPol C-Panel 806–960 65° 15dBi 6°T
800 10207
Type No.
Frequency range
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 14.7 dBi
2 x 15 dBi
Horizontal: 65°
Vertical:
15.7°
Horizontal: 63°
Vertical:
14.6°
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
66°
16°
Electrical tilt
6°, fixed
6°, fixed
6°, fixed
Sidelobe suppression for:
first sidelobe above horizon
sector 0°–30° above horizon
> 13 dB
> 13 dB
> 14 dB
> 14 dB
> 16 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
Tpyically: > 20 dB
Typically: > 10 dB
Typically: > 20 dB
Typically: > 10 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.3
< 1.3
< 1.3
Cross polar ratio
Maindirection
Sector
0°
±60°
Typically: > 20 dB
Typically: > 10 dB
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
118°
63°
14.6°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
123°
65°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
15.7°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
Mechanical specifications
Input
806 – 866 MHz: +45°/ –45° Polarization
2 x 7-16 female
Connector position
Bottom
Weight
125°
66°
Wind load
16°
3
dB
3
Max. wind velocity
10
10
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
Packing size
7.5 kg
Frontal:
Lateral:
Rearside:
220 N (at 150 km/h)
140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h
1436 x 292 x 138 mm
0
Height/width/depth
0
Horizontal Pattern
20
1294 / 259 / 99 mm
Vertical Pattern
6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
806 – 960
X
65°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XPol C-Panel 806–960 65° 17.5dBi 0°–8°T
800 10305
Type No.
Frequency range
806 – 866 MHz
806–960
824 – 894 MHz
+45°, –45°
+45°, –45°
+45°, –45°
Average gain (dBi)
Tilt
16.8 ... 17 ... 16.7
0° ... 4° ... 8°
16.9 ... 17.1 ... 16.9
0° ... 4° ... 8°
17.2 ... 17.4 ... 17.1
0° ... 4° ... 8°
Half-power beam width
Copolar +45°/ –45°
Horizontal: 69°
Vertical:
9.1°
Horizontal: 67°
Vertical:
8.8°
Horizontal: 65°
Vertical:
8.5°
Electrical tilt
continuously adjustable
0°– 8°
0°– 8°
0°– 8°
Polarization
880 – 960 MHz
Vertical Pattern – sidelobe
0° ... 2° ... 4° ... 8° T
0° ... 2° ... 4° ... 8° T
0° ... 2° ... 4° ... 8° T
suppression for first sidelobe 17 ... 16 ... 15 ... 14 dB 17 ... 16 ... 15 ... 14 dB 20 ... 18 ... 17 ... 15 dB
above main beam
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Isolation, between ports
> 30 dB
> 30 dB
> 30 dB
Typically: 25 dB
Typically: > 10 dB
Typically: 25 dB
Typically: > 10 dB
Typically: 25 dB
Typically: > 10 dB
Cross polar ratio
Maindirection
Sector
0°
±60°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
122°
65°
8.5°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
130°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
67°
8.8°
3
dB
dB
3
Mechanical specifications
10
10
Input
0
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Connector position
Adjustment
mechanism
2 x 7-16 female
Rearside, pointing downwards
1x, Position bottom
continuously adjustable
Weight
135°
Wind load
69°
9.1°
3
dB
dB
3
Max. wind velocity
10
10
0
0
Horizontal Pattern
Packing size
Height/width/depth
16 kg
Frontal:
Lateral:
Rearside:
400 N (at 150 km/h)
260 N (at 150 km/h)
890 N (at 150 km/h)
200 km/h
2536 x 292 x 192 mm
2254 / 259 / 99 mm
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
21
806 – 960
X
65°
0° – 10°
set by hand or by optional RCU (Remote Control Unit)
XPol C-Panel 806–960 65° 16.3dBi 0°–10°T
800 10304
Type No.
Frequency range
Polarization
Average gain (dBi)
Tilt
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45
+45°, –45°
15.6 ... 15.8 ... 15.5
0° ... 5° ... 10°
15.7 ... 16.1 ... 15.7
0° ... 5° ... 10°
Half-power beam width
Copolar +45°/ –45°
Horizontal: 69°
Vertical: 12.5°
Electrical tilt
continuously adjustable
0° – 10°
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
Horizontal:
Vertical:
67°
12°
16 ... 16.3 ... 15.9
0° ... 5° ... 10°
Horizontal: 65°
Vertical:
11.5°
0° – 10°
0° – 10°
0° ... 3° ... 6° ... 10°T
0° ... 3° ... 6° ... 10°T
0° ... 3° ... 6° ... 10°T
15 ... 14 ... 12 ... 12 dB 15 ... 15 ... 15 ... 14 dB 15 ... 15 ... 15 ... 14 dB
> 25 dB
> 25 dB
> 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
122°
65°
11.5°
10
dB
3
dB
10
3
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
130°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
67°
12°
3
Input
0
Connector position
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Adjustment
mechanism
135°
69°
12.5°
Max. wind velocity
10
3
Packing size
dB
10
3
2 x 7-16 female
Rearside, pointing downwards
1x, Position bottom
continuously adjustable
Weight
Wind load
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Height/width/depth
13 kg
Frontal:
Lateral:
Rearside:
300 N (at 150 km/h)
195 N (at 150 km/h)
660 N (at 150 km/h)
200 km/h
1976 x 292 x 192 mm
1694 / 259 / 99 mm
0
0
Horizontal Pattern
22
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
65°
XPol A-Panel 806–960 65° 15dBi 12°T
739 633
Frequency range
806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 14.5 dBi
2 x 15 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
68°
17°
65°
120°
806–960
Horizontal:
Vertical:
65°
16°
10
3
dB
Type No.
0
12°, fixed
12°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 28 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
Horizontal Pattern
16°
10
3
2 x 7-16 female
Bottom
dB
Electrical tilt
0
Vertical Pattern
12° electrical downtilt
8 kg
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
806–960
–45°
806–960
+45°
7-16
7-16
23
806 – 960
X
65°
0°– 14°
set by hand or by optional RCU (Remote Control Unit)
XPol A-Panel 806–960 65° 15dBi 0°–14°T
739 684
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
Electrical tilt
continuously adjustable
806 – 960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
+45°, –45°
14.5 dBi
14.7 dBi
15 dBi
70°
16°
Horizontal: 68°
Vertical: 15.5°
0°– 14°
Vertical Pattern – sidelobe
suppression for sector 0°–30°
above main beam
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
806 – 866 MHz
Horizontal:
Vertical:
0°
±60°
Isolation, between ports
Horizontal:
Vertical:
0°– 14°
65°
15°
0°– 14°
14 dB
15 dB
15 dB
> 25 dB
> 25 dB
> 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65°
15°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
130°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
68°
15.5°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Adjustment
mechanism
70°
16°
3
0
Horizontal Pattern
24
3
dB
10
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
135°
2 x 7-16 female
Connector position
0
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Max. wind velocity
14 kg
Frontal:
Lateral:
Rearside:
230 N (at 150 km/h)
130 N (at 150 km/h)
500 N (at 150 km/h)
200 km/h
Packing size
1562 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
0
Vertical Pattern
0°– 14° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806 – 960
X
65°
0°– 14°
set by hand or by optional RCU (Remote Control Unit)
XPol C-Panel 806–960 65° 15dBi 0°–14°T
800 10303
Type No.
Frequency range
Polarization
Average gain (dBi)
Tilt
Half-power beam width
Copolar +45°/ –45°
806 – 866 MHz
806 – 960
824 – 894 MHz
+45°, –45°
+45°, –45°
14.5 ... 14.5 ... 14.2
0° ... 7° ... 14°
14.7 ... 14.7 ... 14.5
0° ... 7° ... 14°
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
69°
16°
880 – 960 MHz
+45°, –45°
Horizontal: 67°
Vertical: 15.5°
15 ... 15.1 ... 14.8
0° ... 7° ... 14°
Horizontal:
Vertical:
65°
15°
0°– 14°
0°– 14°
0°– 14°
Sidelobe suppression for
first sidelobe above horizon
0° ... 7° ... 14°
14 ... 14 ... 13 dB
0° ... 7° ... 14°
15 ... 15 ... 14 dB
0° ... 7° ... 14°
15 ... 15 ... 15 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
122°
65°
15°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
130°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
67°
15.5°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Adjustment
mechanism
69°
16°
3
Max. wind velocity
Packing size
dB
3
10
dB
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
135°
2 x 7-16 female
Connector position
0
Height/width/depth
10 kg
Frontal:
Lateral:
Rearside:
220 N (at 150 km/h)
140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h
1586 x 292 x 138 mm
1294 / 259 / 99 mm
0
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
25
806 – 960
X
65°
0°
XPol C-Panel 806–960 65° 17dBi 0°T
800 10203
Type No.
Frequency range
Polarization
Gain
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
+45°, –45°
2 x 16.5 dBi
Half-power beam width
Copolar +45°/ –45°
2 x 16.7 dBi
Horizontal: 68°
Vertical:
10.2°
Horizontal:
Vertical:
2 x 17 dBi
66°
10°
Horizontal: 65°
Vertical:
9.3°
Sidelobe suppression for:
first sidelobe above horizon
sector 0°–30° above horizon
> 17 dB
> 15 dB
> 17 dB
> 15 dB
> 17 dB
> 15 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
> 20 dB
> 18 dB
> 12 dB
> 20 dB
> 18 dB
> 12 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.4
< 1.3
Cross polar ratio
Maindirection
Sector
Sector
0°
±30°
±60°
> 20 dB
> 18 dB
> 12 dB
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
120°
65°
9.3°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
824 – 894 MHz: +45°/ –45° Polarization
127°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
66°
10°
10
3
Mechanical specifications
dB
3
dB
10
0
Input
0
Horizontal Pattern
Vertical Pattern
68°
10.2°
3
Height/width/depth
dB
3
Max. wind velocity
Packing size
10
10
Rearside
Weight
Wind load
130°
2 x 7-16 female
Connector position
806 – 866 MHz: +45°/ –45° Polarization
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
11 kg
Frontal:
Lateral:
Rearside:
340 N (at 150 km/h)
220 N (at 150 km/h)
750 N (at 150 km/h)
200 km/h
2066 x 292 x 192 mm
1934 / 259 / 99 mm
0
0
Horizontal Pattern
26
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
65°
XPol A-Panel 806–960 65° 17dBi
739 623
Frequency range
806 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
68°
10°
65°
120°
806–960
Horizontal: 65°
Vertical:
9.5°
10
3
dB
Type No.
0
≥ 15 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
2 x 7-16 female
Horizontal Pattern
9.5°
10
3
dB
Sidelobe suppression for
first sidelobe above horizon
0
Bottom or top
Vertical Pattern
12 kg
first null-fill below horizon
better or equal –25 dB
below maximum gain
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
806–960
–45°
806–960
+45°
7-16
7-16
27
806 – 960
X
65°
3°
XPol C-Panel 806–960 65° 17dBi 3°T
800 10293
Type No.
Frequency range
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.7 dBi
2 x 17 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 68°
Vertical:
10.2°
Horizontal:
Vertical:
66°
10°
Horizontal: 64°
Vertical:
9.3°
Electrical tilt
3°, fixed
3°, fixed
3°, fixed
Sidelobe suppression for:
first sidelobe above horizon
sector 0°–30° above horizon
> 15 dB
> 15 dB
> 15 dB
> 15 dB
> 15 dB
> 15 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
> 20 dB
> 17 dB
> 10 dB
> 20 dB
> 17 dB
> 10 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.4
< 1.3
Cross polar ratio
Maindirection
Sector
Sector
0°
±30°
±60°
> 20 dB
> 17 dB
> 10 dB
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
120°
64°
9.3°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
3° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
127°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
66°
10°
10
3
Mechanical specifications
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
3° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Input
10.2°
3
Height/width/depth
dB
3
Max. wind velocity
Packing size
10
10
Rearside
Weight
Wind load
130°
2 x 7-16 female
Connector position
68°
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
11 kg
Frontal:
Lateral:
Rearside:
340 N (at 150 km/h)
220 N (at 150 km/h)
750 N (at 150 km/h)
200 km/h
2066 x 292 x 192 mm
1934 / 259 / 99 mm
0
0
Horizontal Pattern
28
Vertical Pattern
3° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
65°
XPol A-Panel 806–960 65° 17dBi 6°T
739 634
Frequency range
806 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
68°
10°
65°
120°
806–960
Horizontal: 65°
Vertical:
9.5°
10
3
dB
Type No.
0
6°, fixed
6°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 14 dB
≥ 18 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation
> 32 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
Horizontal Pattern
9.5°
10
3
7-16 female
Bottom
dB
Electrical tilt
0
Vertical Pattern
6° electrical downtilt
12 kg
Frontal / Lateral / Rearside:
350 N / 200 N / 770 N
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
806–960
–45°
806–960
+45°
7-16
7-16
29
806 – 960
X
65°
6°
XPol C-Panel 806–960 65° 17dBi 6°T
800 10294
Type No.
Frequency range
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.7 dBi
2 x 17 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 68°
Vertical:
10.2°
Horizontal:
Vertical:
66°
10°
Horizontal: 64°
Vertical:
9.3°
Electrical tilt
6°, fixed
6°, fixed
6°, fixed
Sidelobe suppression for:
first sidelobe above horizon
sector 0°–30° above horizon
> 14 dB
> 14 dB
> 15 dB
> 14 dB
> 15 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
Typ. > 20 dB
Typ. > 10 dB
Typ. > 20 dB
Typ. > 10 dB
Typ. > 20 dB
Typ. > 10 dB
Cross polar ratio
Maindirection
Sector
0°
±60°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.4
< 1.3
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
120°
64°
9.3°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
127°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
66°
10°
10
3
Mechanical specifications
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Input
10.2°
3
Height/width/depth
dB
3
Max. wind velocity
Packing size
10
10
Rearside
Weight
Wind load
130°
2 x 7-16 female
Connector position
68°
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
11 kg
Frontal:
Lateral:
Rearside:
340 N (at 150 km/h)
220 N (at 150 km/h)
750 N (at 150 km/h)
200 km/h
2066 x 292 x 192 mm
1934 / 259 / 99 mm
0
0
Horizontal Pattern
30
Vertical Pattern
6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
824 – 960
X
65°
XPol A-Panel 824–960 65° 17dBi 9°T
741 622
Frequency range
824 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
68°
10°
65°
120°
824–960
Horizontal: 65°
Vertical:
9.5°
10
3
dB
Type No.
0
9°, fixed
9°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 14 dB
≥ 16 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation
> 32 dB
> 32 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
Horizontal Pattern
9.5°
10
3
2 x 7-16 female
Bottom
dB
Electrical tilt
0
Vertical Pattern
9° electrical downtilt
12 kg
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
824–960
–45°
824–960
+45°
7-16
7-16
31
806 – 960
X
65°
0° – 10°
set by hand or by optional RCU (Remote Control Unit)
XPol A-Panel 806–960 65° 16.5dBi 0°–10°T
739 685
Type No.
Frequency range
806 – 866 MHz
806–960
824 – 894 MHz
Polarization
+45°, –45°
+45°, –45
+45°, –45°
Gain
2 x 16 dBi
2 x 16 dBi
2 x 16.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
70°
10°
Horizontal:
Vertical:
0.5° – 10°
880 – 960 MHz
68°
10°
Horizontal:
Vertical:
0.5° – 10°
65°
9.5°
0.5° – 10°
Vertical Pattern – sidelobe
0° ... 3° ... 6° ... 10°T
0° ... 3° ... 6° ... 10°T
0° ... 3° ... 6° ... 10°T
suppression for
first sidelobe above main beam: 15 ... 14 ... 12 ... 12 dB 15 ... 15 ... 15 ... 14 dB 17 ... 17 ... 17 ... 17 dB
sector 0°–30° above main beam:
12 dB
13 dB
15 dB
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
> 25 dB
> 25 dB
> 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65°
9.5°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0.5°– 10° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
130°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
68°
10°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0.5°– 10° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Adjustment
mechanism
70°
10°
3
3
dB
10
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
135°
2 x 7-16 female
Connector position
0
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Max. wind velocity
18 kg
Frontal:
Lateral:
Rearside:
330 N (at 150 km/h)
200 N (at 150 km/h)
770 N (at 150 km/h)
200 km/h
Packing size
2262 x 287 x 165 mm
Height/width/depth
1996 / 262 / 116 mm
0
0
Horizontal Pattern
32
Vertical Pattern
0.5°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
800/900
X
65°
XPol A-Panel 870–960 65° 18dBi
Type No.
739 630
Frequency range
870 – 960 MHz
Polarization
65°
120°
+45°, –45°
Gain
2 x 18 dBi
Horizontal:
Vertical:
Sidelobe suppression for
first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB
65°
7°
3
0
Horizontal Pattern
Impedance
50 Ω
VSWR
< 1.3
7°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
3
2 x 7-16 female
Connector position
0
Bottom or top
Weight
dB
10
Input
Wind load (at 150 km/h)
dB
10
Half-power beam width
Copolar +45°/ –45°
Vertical Pattern
19 kg
first null-fill below horizon
better or equal –25 dB
below maximum gain
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
800/900
–45°
800/900
+45°
7-16
7-16
XPol A-Panel 806–960 65° 18dBi
739 624
Frequency range
120°
806–960
806 – 880 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 68°
Vertical:
7.5°
Horizontal:
Vertical:
65°
7°
65°
10
3
dB
Type No.
0
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation
> 30 dB
> 32 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Connector position
Weight
Wind load (at 150 km/h)
7°
10
2 x 7-16 female
Bottom or top
19 kg
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
3
dB
Input
Horizontal Pattern
0
Vertical Pattern
33
806 – 960
X
65°
0°
XPol C-Panel 806–960 65° 18dBi 0°T
800 10204
Type No.
Frequency range
806–960
824 – 894 MHz
806 – 866 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.4 dBi
2 x 17.6 dBi
2 x 17.8 dBi
Horizontal: 68°
Vertical:
8.5°
Horizontal: 66°
Vertical:
8.3°
Horizontal: 64°
Vertical:
7.8°
Sidelobe suppression for:
first sidelobe above horizon
sector 0°–30° above horizon
> 15 dB
> 15 dB
> 15 dB
> 15 dB
> 15 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
> 18 dB
> 16 dB
> 10 dB
> 19 dB
> 16 dB
> 10 dB
Half-power beam width
Copolar +45°/ –45°
Cross polar ratio
Maindirection
Sector
Sector
0°
±30°
±60°
> 20 dB
> 17 dB
> 11 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.4
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
120°
64°
7.8°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
824 – 894 MHz: +45°/ –45° Polarization
127°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
66°
8.3°
10
3
Mechanical specifications
dB
3
dB
10
0
Input
0
Horizontal Pattern
Vertical Pattern
Rearside
Weight
Wind load
130°
2 x 7-16 female
Connector position
806 – 866 MHz: +45°/ –45° Polarization
68°
12.5 kg
Frontal:
Lateral:
Rearside:
400 N (at 150 km/h)
260 N (at 150 km/h)
890 N (at 150 km/h)
8.5°
Max. wind velocity
10
3
3
Packing size
dB
10
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
Height/width/depth
200 km/h
2386 x 292 x 192 mm
2254 / 259 / 99 mm
0
0
Horizontal Pattern
34
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
65°
XPol A-Panel 806–960 65° 18dBi 6°T
739 636
Type No.
Frequency range
806–960
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Horizontal: 68°
Vertical:
7.5°
Horizontal:
Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 18 dB
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB
Impedance
50 Ω
10
< 1.3
3
< –150 dBc
0
500 W (at 50 °C ambient temperature)
Input
2 x 7-16 female
Connector position
Vertical Pattern
6° electrical downtilt
Bottom
Weight
Wind load (at 150 km/h)
0
Horizontal Pattern
7°
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
3
dB
VSWR
65°
7°
10
dB
806 – 880 MHz
Half-power beam width
Copolar +45°/ –45°
65°
120°
19 kg
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
806–960
–45°
806–960
+45°
7-16
7-16
XPol A-Panel 806–960 65° 18dBi 9°T
739 637
Frequency range
120°
806–960
806 – 870 MHz
870 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
65°
7.5°
65°
10
3
dB
Type No.
0
Electrical tilt
9°, fixed
Horizontal Pattern
Sidelobe suppression for
first sidelobe above horizon
better 18 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 32 dB
VSWR
7.5°
50 Ω
< 1.5
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
10
3
2 x 7-16 female
Bottom
dB
Impedance
0
Vertical Pattern
9° electrical downtilt
19 kg
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
35
806 – 960
X
65°
0° – 7°
set by hand or by optional RCU (Remote Control Unit)
XPol A-Panel 806–960 65° 17.5dBi 0°–7°T
739 686
Type No.
Frequency range
806–960
824 – 894 MHz
806 – 866 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45
+45°, –45°
Gain
2 x 17 dBi
2 x 17.2 dBi
2 x 17.5 dBi
Half-power beam width
Copolar +45°/ -45°
Horizontal: 70°
Vertical:
7.9°
Horizontal: 68°
Vertical:
7.7°
Electrical tilt
continuously adjustable
0° – 7°
0° – 7°
Horizontal:
Vertical:
65°
7.5°
0° – 7°
Vertical Pattern – sidelobe
0° ... 2° ... 4° ... 7° T
0° ... 2° ... 4° ... 7° T
0° ... 2° ... 4° ... 7° T
suppression for
first sidelobe above main beam: 17 ... 17 ... 17 ... 17 dB 18 ... 18 ... 18 ... 18 dB 18 ... 18 ... 18 ... 18 dB
sector 0°–30° above main beam: 14 ... 14 ... 14 ... 14 dB 15 ... 15 ... 15 ... 15 dB 17 ... 17 ... 17 ... 17 dB
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation
> 25 dB
> 25 dB
> 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
125°
65°
7.5°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 7° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
130°
806 – 960
–45°
806 – 960
+45°
7-16
7-16
68°
7.7°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Connector position
0
Horizontal Pattern
Vertical Pattern
0°– 7° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Weight
Wind load
135°
70°
7.9°
3
3
dB
10
10
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Max. wind velocity
2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
22 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
Packing size
2846 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
0
Horizontal Pattern
36
Vertical Pattern
0°– 7° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
88°
XPol A-Panel 806–960 88° 13.5dBi
739 648
165°
806–960
806 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 13 dBi
2 x 13.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
85°
16°
Horizontal:
Vertical:
Sidelobe suppression for
first sidelobe above horizon
≥ 16 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
88°
15°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
2 x 7-16 female
Bottom or top
10
3
dB
Frequency range
88°
0
Horizontal Pattern
15°
10
3
dB
Type No.
0
Vertical Pattern
8.3 kg
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N
Max. wind velocity
200 km/h
Height/width/depth
1296 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
806–960
–45°
806–960
+45°
7-16
7-16
37
806 – 960
X
88°
6°
XPol A-Panel 806–960 88° 14dBi 6°T
739 658
Type No.
Frequency range
Polarization
Gain
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45
+45°, –45°
2 x 13.3 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Electrical tilt
85°
17°
2 x 13.5 dBi
2 x 13.7 dBi
Horizontal: 85°
Vertical: 16.5°
Horizontal: 88°
Vertical:
15.5°
6° , fixed
6° , fixed
6° , fixed
Sidelobe suppression for
sector 0°– 30° above horizon
16 dB
16 dB
16 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
> 18 dB
> 14 dB
> 20 dB
> 14 dB
> 20 dB
> 14 dB
Cross polar ratio
Maindirection
Sector
0°
±60°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
88°
165°
15.5°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
806 – 960
–45°
806 – 960
+45°
7-16
7-16
824 – 894 MHz: +45°/ –45° Polarization
85°
160°
16.5°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
85°
Input
2 x 7-16 female
Connector position
Bottom
Weight
Wind load
160°
17°
Max. wind velocity
8.3 kg
Frontal:
Lateral:
Rearside:
230 N (at 150 km/h)
130 N (at 150 km/h)
500 N (at 150 km/h)
200 km/h
10
3
0
Horizontal Pattern
38
3
dB
10
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
Packing size
1425 x 302 x 172 mm
Height/width/depth
1296 / 262 / 116 mm
0
Vertical Pattern
6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
824– 960
X
88°
0°– 14°
set by hand or by optional RCU (Remote Control Unit)
XPol A-Panel 824–960 88° 13.5dBi 0°–14°T
739 664
Type No.
Frequency range
824–960
Polarization
Gain
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
13.5 dBi
13.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 85°
Vertical:
15.5°
Electrical tilt
continuously adjustable
0°–14°
Horizontal:
Vertical:
88°
15°
0°–14°
Vertical Pattern – sidelobe
0° ... 4° ... 8° ... 14° T 0° ... 4° ... 8° ... 14° T
suppression for first sidelobe 16 ... 16 ... 16 ... 16 dB 15 ... 16 ... 16 ... 16 dB
above main beam
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation
> 23 dB
> 23 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
88°
170°
15°
824 – 960
–45°
824 – 960
+45°
7-16
7-16
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
continuously adjustable
824 – 894 MHz: +45°/ –45° Polarization
Mechanical specifications
Input
2 x 7-16 female
Connector position
Adjustment
mechanism
85°
170°
Bottom
1x, Position bottom
continuously adjustable
Weight
15.5°
Wind load
14 kg
Frontal:
Lateral:
Rearside:
230 N (at 150 km/h)
130 N (at 150 km/h)
500 N (at 150 km/h)
10
Max. wind velocity
0
Horizontal Pattern
3
dB
3
dB
10
0
200 km/h
Packing size
1562 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
Vertical Pattern
0°– 14° electrical downtilt
continuously adjustable
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
39
870 – 960
X
90°
XPol A-Panel 870–960 90° 15.5dBi
Type No.
739 655
Frequency range
870 – 960 MHz
Gain
Half-power beam width
Copolar +45°/ –45°
+45°, –45°
2 x 15.5 dBi
Horizontal:
Vertical:
Sidelobe suppression for
first sidelobe above horizon
≥ 15 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 32 dB
90°
10°
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Connector position
Weight
Wind load (at 150 km/h)
10°
10
2 x 7-16 female
Bottom or top
14 kg
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
40
0
Horizontal Pattern
Impedance
Input
3
dB
Polarization
90°
170°
3
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
0
Vertical Pattern
first null-fill below horizon
better or equal –25 dB
below maximum gain
870–960
–45°
870–960
+45°
7-16
7-16
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
88°
XPol A-Panel 806–960 88° 15.5dBi
739 649
165°
806–960
806 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 85°
Vertical:
10.5°
Horizontal:
Vertical:
Sidelobe suppression for
first sidelobe above horizon
≥ 18 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
88°
10°
Max. power per input
600 W (at 50 °C ambient temperature)
10
2 x 7-16 female
3
0
Bottom or top
Vertical Pattern
17.1 kg
first null-fill below horizon
better or equal –25 dB
below maximum gain
Weight
Wind load (at 150 km/h)
0
10°
< –150 dBc
Connector position
3
Horizontal Pattern
Intermodulation IM3
(2 x 43 dBm carrier)
Input
10
dB
Frequency range
88°
dB
Type No.
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
806–960
–45°
806–960
+45°
7-16
7-16
XPol A-Panel 806–960 88° 15.5dBi 6°T
739 660
Frequency range
88°
165°
806–960
806 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 15.5 dBi
Horizontal: 85°
Vertical:
10.5°
Horizontal:
Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 18 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 30 dB
Impedance
VSWR
88°
10°
10°
50 Ω
< 1.3
< 1.3
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Connector position
Weight
Wind load (at 150 km/h)
3
0
Horizontal Pattern
Intermodulation IM3
(2 x 43 dBm carrier)
Input
10
10
3
2 x 7-16 female
Bottom
dB
Half-power beam width
Copolar +45°/ –45°
dB
Type No.
0
Vertical Pattern
6° electrical downtilt
17 kg
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N
Max. wind velocity
200 km/h
Height/width/depth
1936 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
41
806 – 960
X
88°
0° – 10°
set by hand or by optional RCU (Remote Control Unit)
XPol A-Panel 806–960 88° 15dBi 0°–10°T
739 665
Type No.
Frequency range
Polarization
Gain
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45
+45°, –45°
2 x 15 dBi
2 x 15 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 85°
Vertical: 10.5°
Horizontal: 85°
Vertical: 10.2°
Electrical tilt
continuously adjustable
0.5° – 10°
0.5° – 10°
2 x 15 dBi
Horizontal:
Vertical:
88°
10°
0.5° – 10°
Vertical Pattern – sidelobe
0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T
suppression for first sidelobe 16 ... 16 ... 17 ... 17 dB 16 ... 16 ... 17 ... 17 dB 16 ... 16 ... 18 ... 18 dB
above main beam
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation
> 25 dB
> 25 dB
> 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
88°
160°
10°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0.5°– 10° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
806 – 960
–45°
806 – 960
+45°
7-16
7-16
85°
160°
10.2°
Mechanical specifications
10
3
0
Input
dB
3
dB
10
Horizontal Pattern
2 x 7-16 female
Connector position
0
Vertical Pattern
0.5°– 10° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
85°
160°
18 kg
Frontal:
Lateral:
Rearside:
330 N (at 150 km/h)
200 N (at 150 km/h)
770 N (at 150 km/h)
10.5°
Max. wind velocity
10
3
0
Horizontal Pattern
42
3
dB
10
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
200 km/h
Packing size
2262 x 287 x 165 mm
Height/width/depth
1996 / 262 / 116 mm
0
Vertical Pattern
0.5°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
806 – 960
X
88°
XPol A-Panel 806–960 88° 17dBi
739 650
165°
806–960
806 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.7 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 85°
Vertical:
8.5°
Horizontal:
Vertical:
Sidelobe suppression for
first sidelobe above horizon
≥ 18 dB
Front-to-back ratio, copolar
> 25 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
88°
8°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
600 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
2 x 7-16 female
10
3
dB
Frequency range
88°
0
Horizontal Pattern
8°
10
3
dB
Type No.
0
Bottom or top
Vertical Pattern
22.6 kg
first null-fill below horizon
better or equal –25 dB
below maximum gain
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N
Max. wind velocity
200 km/h
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
806–960
–45°
806–960
+45°
7-16
7-16
43
806 – 960
X
88°
0°
XPol C-Panel 806–960 88° 17dBi 0°T
800 10213
Type No.
Frequency range
Polarization
Gain
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
+45°, –45°
2 x 16.5 dBi
2 x 16.6 dBi
Horizontal: 85°
Vertical:
8.7°
Horizontal: 85°
Vertical:
8.5°
Electrical tilt
0°, fixed
0°, fixed
0°, fixed
Sidelobe suppression for
first sidelobe above horizon
> 18 dB
> 18 dB
> 18 dB
Front-to-back ratio, copolar
> 28 dB
> 28 dB
> 27 dB
Isolation
> 30 dB
> 30 dB
> 30 dB
Typically: 20 dB
> 20 dB
> 15 dB
Typically: 20 dB
> 20 dB
> 15 dB
Half-power beam width
Copolar +45°/ –45°
Cross polar ratio
Maindirection
Sector
Sector
0°
±30°
±60°
Impedance
2 x 16.8 dBi
Horizontal:
Vertical:
88°
8°
Typically: 20 dB
> 17 dB
> 14 dB
50 Ω
VSWR
< 1.5
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
88°
162°
8°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
824 – 894 MHz: +45°/ –45° Polarization
85°
806 – 960
+45°
806 – 960
–45°
7-16
7-16
157°
8.5°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern
Input
806 – 866 MHz: +45°/ –45° Polarization
2 x 7-16 female
Connector position
Rearside
Weight
85°
Wind load
155°
8.7°
Max. wind velocity
10
17 kg
Frontal:
Lateral:
Rearside:
400 N (at 150 km/h)
260 N (at 150 km/h)
890 N (at 150 km/h)
200 km/h
10
0
Horizontal Pattern
44
3
Packing size
dB
3
dB
GSM 900
XPol
Compact Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
Height/width/depth
0
2400 x 292 x 192 mm
2254 / 259 / 99 mm
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
806 – 960
X
88°
6°
XPol A-Panel 806–960 88° 17dBi 6°T
739 662
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
Electrical tilt
806 – 866 MHz
806–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45
+45°, –45°
2 x 16.3 dBi
2 x 16.5 dBi
Horizontal: 85°
Vertical:
8.3°
Horizontal: 85°
Vertical:
7.9°
6° , fixed
6° , fixed
2 x 16.7 dBi
Horizontal:
Vertical:
6° , fixed
Sidelobe suppression for
first sidelobe above horizon
16 dB
16 dB
17 dB
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
Isolation
> 32 dB
> 32 dB
> 32 dB
> 23 dB
> 14 dB
> 23 dB
> 14 dB
> 23 dB
> 14 dB
Cross polar ratio
Maindirection
Sector
0°
±60°
88°
7.5°
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
500 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
88°
165°
7.5°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
806 – 960
–45°
806 – 960
+45°
7-16
7-16
85°
160°
7.9°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
85°
Input
Connector position
Weight
Wind load
160°
8.3°
Max. wind velocity
2 x 7-16 female
Bottom
21.4 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
10
0
Horizontal Pattern
3
dB
3
dB
10
Packing size
2721 x 302 x 172 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern
6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
45
806 – 960
X
88°
0° – 7°
set by hand or by optional RCU (Remote Control Unit)
XPol A-Panel 806–960 88° 16dBi 0°–7°T
739 666
Type No.
Frequency range
806 – 866 MHz
806–960
824 – 894 MHz
Polarization
+45°, –45°
+45°, –45
+45°, –45°
Gain
2 x 16 dBi
2 x 16.1 dBi
2 x 16.2 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 85°
Vertical:
8.2°
Electrical tilt
continuously adjustable
0° – 7°
Horizontal:
Vertical:
880 – 960 MHz
85°
8°
Horizontal:
Vertical:
0° – 7°
88°
7.5°
0° – 7°
Vertical Pattern – sidelobe
0° ... 2° ... 4° ... 7° T
0° ... 2° ... 4° ... 7° T
0° ... 2° ... 4° ... 7° T
suppression for first sidelobe 17 ... 17 ... 17 ... 17 dB 17 ... 17 ... 17 ... 17 dB 17 ... 17 ... 17 ... 17 dB
above main beam
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Typically: 25 dB
> 15 dB
Typically: 25 dB
> 15 dB
Typically: 25 dB
> 15 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
400 W (at 50 °C ambient temperature)
880 – 960 MHz: +45°/ –45° Polarization
88°
160°
7.5°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 7° electrical downtilt
824 – 894 MHz: +45°/ –45° Polarization
806 – 960
–45°
806 – 960
+45°
7-16
7-16
85°
160°
8°
Mechanical specifications
10
3
0
Input
dB
3
dB
10
Connector position
0
Horizontal Pattern
Vertical Pattern
0°– 7° electrical downtilt
806 – 866 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Weight
Wind load
85°
160°
8.2°
10
3
0
Horizontal Pattern
46
3
dB
10
dB
GSM 900
XPol
A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Max. wind velocity
2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
22 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
Packing size
2846 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
0
Vertical Pattern
0°– 7° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
GSM 900
VPol
Summary – Directional Antennas
Vertical Polarization
GSM 900 / GSM-R / GSM 850 / CDMA 800
Vertical Polarization – 800/900
Type
Type No.
Height
[mm]
Connector
position
Page
735 727
492
bottom
48
VPol Panel
870–960
20°
16.5dBi
VPol ParPanel
870–960
36°
20dBi
K 73 45 64 7
2250
bottom
49
VPol LogPer
790–960
51°
12dBi
K 73 22 67
300
bottom
50
VPol Panel
860–960
65°
9dBi
730 677
264
bottom or top
51
VPol Panel
VPol Panel
870–960
806–960
65°
65°
15.5dBi
15.5dBi
6°T
730 368
732 691
1294
1294
bottom
bottom
51
52
VPol Panel
VPol Panel
870–960
870–960
65°
65°
17dBi
17dBi
9°T
730 691
737 547
1934
1934
rearside
rearside
52
53
VPol Panel
870–960
65°
18dBi
739 854
2254
rearside
53
VPol Panel
VPol Panel
870–960
870–960
65°
65°
18.5dBi
18.5dBi
730 376
732 689
2574
2574
rearside
rearside
54
54
VPol F-Panel
872–960
90°
7.5dBi
736 854
262
bottom or top
55
VPol Panel
870–960
90°
17dBi
730 378
2574
rearside
56
VPol Panel
870–960
120°
16dBi
730 382
2574
rearside
57
6°T
Additional versions on request
47
870 – 960
V
20°
VPol Panel 870–960 20° 16.5dBi
735 727
Type No.
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Front-to-back ratio
Half-power Beam Width
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Weight
Wind load
7-16 female
870 – 960 MHz
< 1.3
16.5 dBi
50 Ω
Vertical
> 24 dB
H-plane: 20°/ E-plane: 33°
< –150 dBc
500 W (at 50 °C ambient temperature)
10 kg
Frontal:
500 N (at 150 km/h)
Lateral:
110 N (at 150 km/h)
Rearside: 715 N (at 150 km/h)
230 km/h
1062 x 562 x 275 mm
492 / 992 / 190 mm
Max. wind velocity
Packing size
Height/width/depth
Material:
Radiator: Aluminum.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: White.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
All metal parts of the antenna as well as
the inner conductor are DC grounded.
Accessories (order separately)
Type No.
K
K
K
K
61
61
61
61
14
14
14
14
Description
02
03
04
05
2
2
2
2
clamps
clamps
clamps
clamps
Remarks
Mast: 60 – 115 mm diameter
Mast: 115 – 210 mm diameter
Mast: 210 – 380 mm diameter
Mast: 380 – 521 mm diameter
33°
20°
10
0
Horizontal Pattern
48
3
dB
3
10
dB
GSM 900
VPol
Panel
Vertical Polarization
Half-power Beam Width
0
Vertical Pattern
K 61 14 03
Parabolic Panel
Vertical Polarization
Half-power Beam Width
870 – 960
GSM 900
VPol
V
36°
VPol ParPanel 870–960 36° 20dBi
K 73 45 64 7
Type No.
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Front-to-back ratio
Half-power Beam Width
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Weight
Wind load
7-16 female
870 – 960 MHz
< 1.3
20 dBi
50 Ω
Vertical
> 30 dB
Horizontal: 36°/ Vertical: 8°
< –150 dBc
500 W (at 50 °C ambient temperature)
30 kg
Frontal:
950 N (at 150 km/h)
Lateral:
600 N (at 150 km/h)
Rearside: 950 N (at 150 km/h)
200 km/h
2420 x 640 x 465 mm
2250 / 591 / 406 mm
Radiator: Weather-proof aluminum.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Due to the very sturdy antenna construction and
the protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
All metal parts of the antenna are DC grounded.
The inner conductor is coupled capacitively.
2360
Ice protection:
429
2250
Material:
2300
Max. wind velocity
Packing size
Height/width/depth
Accessories (order separately)
733 736
K 61 14 03
K 61 14 04
K 61 14 05
733 695
2
2
2
2
1
clamps
clamps
clamps
clamps
downtilt kit
∅ 11
Remarks
Mast: 50 – 125 mm diameter
Mast: 115 – 210 mm diameter
Mast: 210 – 380 mm diameter
Mast: 380 – 521 mm diameter
Downtilt angle: 0° – 10°
Use the downtilt kit together
with 2 clamps suitable for
the mast diameter.
∅13
140
Description
591
Type No.
406
36°
8°
10
3
0
Horizontal Pattern
3
dB
dB
10
0
Vertical Pattern
K 61 14 03
49
790 – 960
V
51°
VPol LogPer 790–960 51° 12dBi
K 73 22 67
Type No.
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Side-lobe supression
Front-to-back ratio
Half-power Beam Width
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Weight
Wind load
7-16 female
790 – 960 MHz
< 1.4
12 dBi
50 Ω
Vertical
> 25 dB
> 30 dB
Horizontal: 51°/ Vertical: 45°
< –150 dBc
500 W (at 50 °C ambient temperature)
6.3 kg
Frontal:
20 N (at 150 km/h)
Lateral:
260 N (at 150 km/h)
Rearside:
30 N (at 150 km/h)
200 km/h
1000 x 360 x 175 mm
300 / 155 / 785 mm
Max. wind velocity
Packing size
Height/width/depth
Material:
Radiator: Weather-proof aluminum.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Mounting:
The antenna can be mounted on tubular mast
with a diameter of 30 – 70 mm with supplied
clamps.
Ice protection:
Due to the very sturdy antenna construction and
the protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
All metal parts of the antenna as well as
the inner conductor are DC grounded.
51°
3
10
0
Horizontal Pattern
50
45°
3
dB
10
dB
GSM 900
VPol
Logarithmic periodic
Vertical Polarization
Half-power Beam Width
0
Vertical Pattern
Eurocell Panel
Vertical Polarization
Half-power Beam Width
900
GSM 900
VPol
V
65°
VPol Panel 860–960 65° 9dBi
Type No.
730 677
Frequency range
860 – 960 MHz
Polarization
65°
120°
Vertical
Gain
9 dBi
> 25 dB (890 – 960 MHz)
> 20 dB (860 – 890 MHz)
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
0
Horizontal Pattern
< –150 dBc
70°
350 W (at 50 °C ambient temperature)
Input
N female
Connector position
10
Bottom or top
Weight
Wind load (at 150 km/h)
3
1.2 kg
Frontal / Lateral / Rearside:
40 N / 25 N / 90 N
Max. wind velocity
230 km/h
Height/width/depth
264 / 258 / 103 mm
3
dB
Front-to-back ratio
H-plane: 65°
E-plane: 70°
dB
10
Half-power beam width
0
Vertical Pattern
VPol Panel 870–960 65° 15.5dBi
Type No.
730 368
Frequency range
870 – 960 MHz
Polarization
Gain
120°
65°
Vertical
15.5 dBI
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
Wind load (at 150 km/h)
3
0
Horizontal Pattern
< –150 dBc
500 W (at 50 °C ambient temperature)
13°
7-16 female
Bottom
6 kg
Frontal / Lateral / Rearside:
220 N / 140 N / 490 N
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
10
3
dB
Front-to-back ratio
H-plane: 65°
E-plane: 13°
dB
10
Half-power beam width
0
Vertical Pattern
51
800/900
V
65°
VPol Panel 806–960 65° 15.5dBi 6°T
Type No.
732 691
Frequency range
806 – 960 MHz
Polarization
120°
65°
Vertical
Gain
15.5 dBi
H-plane: 65°
E-plane: 13°
Electrical downtilt
6°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
0
Horizontal Pattern
< –150 dBc
13°
500 W (at 50 °C ambient temperature)
Input
7-16 female
Connector position
Bottom
Weight
6 kg
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
220 N / 140 N / 490 N
Max. wind velocity
200 km/h
Height/width/depth
1294 / 258 / 103 mm
10
3
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
6° electrical downtilt
VPol Panel 870–960 65° 17dBi
Type No.
730 691
Frequency range
870 – 960 MHz
Polarization
Gain
120°
65°
Vertical
17 dBi
Front-to-back ratio
H-plane: 65°
E-plane: 8.5°
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
3
0
Horizontal Pattern
< –150 dBc
500 W (at 50 °C ambient temperature)
8.5°
7-16 female
Rearside
10
9 kg
3
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
340 N / 220 N / 750 N
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
52
dB
10
Half-power beam width
dB
GSM 900
VPol
Eurocell Panel
Vertical Polarization
Half-power Beam Width
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Eurocell Panel
Vertical Polarization
Half-power Beam Width
870 – 960
GSM 900
VPol
V
65°
VPol Panel 870–960 65° 17dBi 9°T
Type No.
737 547
Frequency range
870 – 960 MHz
Polarization
120°
65°
Vertical
Gain
17 dBi
H-plane: 65°
E-plane: 8.5°
Electrical downtilt
9°, fixed
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
0
Horizontal Pattern
< –150 dBc
9°
500 W (at 50 °C ambient temperature)
Input
7-16 female
Connector position
Rearside
Weight
9 kg
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
340 N / 220 N / 750 N
Max. wind velocity
200 km/h
Height/width/depth
1934 / 258 / 103 mm
10
3
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
9° electrical downtilt
VPol Panel 870–960 65° 18dBi
Type No.
739 854
Frequency range
870 – 960 MHz
Polarization
Gain
120°
65°
Vertical
18 dBi
> 25 dB
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
3
0
Horizontal Pattern
< –150 dBc
400 W (at 50 °C ambient temperature)
7.5°
7-16 female
Rearside
10
10.5 kg
3
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
400 N / 260 N / 890 N
Max. wind velocity
180 km/h
Height/width/depth
2254 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
dB
Front-to-back ratio
H-plane: 65°
E-plane: 7.5°
dB
10
Half-power beam width
0
Vertical Pattern
53
870 – 960
V
65°
VPol Panel 870–960 65° 18.5dBi
Type No.
730 376
Frequency range
870 – 960 MHz
Polarization
120°
65°
Vertical
Gain
18.5 dBi
H-plane: 65°
E-plane: 6.5°
Front-to-back ratio
> 25 dB
Impedance
50 Ω
VSWR
0
Horizontal Pattern
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
500 W (at 50 °C ambient temperature)
Input
6.5°
7-16 female
Connector position
Rearside
Weight
10
12 kg
3
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
460 N / 300 N / 1020 N
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
dB
Max. power
3
dB
10
Half-power beam width
0
Vertical Pattern
VPol Panel 870–960 65° 18.5dBi 6°T
Type No.
732 689
Frequency range
870 – 960 MHz
Polarization
Gain
120°
65°
Vertical
18.5 dBi
Electrical downtilt
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
H-plane: 65°
E-plane: 6.5°
6°, fixed
> 25 dB
3
0
Horizontal Pattern
50 Ω
< 1.3
< –150 dBc
6.5°
500 W (at 50 °C ambient temperature)
7-16 female
10
Rearside
3
Weight
dB
10
Half-power beam width
dB
GSM 900
VPol
Eurocell Panel
Vertical Polarization
Half-power Beam Width
12 kg
0
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
460 N / 300 N / 1020 N
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
54
Vertical Pattern
6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
F-Panel
Vertical Polarization
Half-power Beam Width
872 – 960
GSM 900
VPol
V
90°
VPol F-Panel 872–960 90° 7.5dBi
Type No.
736 854
Frequency range
872 – 960 MHz
Half-power beam width
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
Vertical
7.5 dBi
H-plane: 90°
E-plane: 70°
> 20 dB
50 Ω
10
3
0
Horizontal Pattern
< 1.5
< –140 dBc
70°
350 W (at 50 °C ambient temperature)
N female
Bottom or top
10
1.5 kg
3
Wind load (at 150 km/h)
dB
Gain
180°
Frontal / Lateral / Rearside:
45 N / 20 N / 60 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
262 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
dB
Polarization
90°
0
Vertical Pattern
55
870 – 960
V
90°
VPol Panel 870–960 90° 17dBi
Type No.
730 378
Frequency range
870 – 960 MHz
Gain
Half-power beam width
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
180°
Vertical
17 dBi
H-plane: 90°
E-plane: 6.5°
> 23 dB
50 Ω
10
3
0
Horizontal Pattern
< 1.3
< –150 dBc
500 W (at 50 °C ambient temperature)
6.5°
7-16 female
Rearside
10
12 kg
3
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
460 N / 300 N / 1020 N
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
56
dB
Polarization
90°
dB
GSM 900
VPol
Eurocell Panel
Vertical Polarization
Half-power Beam Width
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Eurocell Panel
Vertical Polarization
Half-power Beam Width
870 – 960
GSM 900
VPol
V
120°
VPol Panel 870–960 120° 16dBi
Type No.
730 382
Frequency range
870 – 960 MHz
Polarization
Gain
120°
215°
Vertical
16 dBi
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
> 20 dB
50 Ω
3
0
Horizontal Pattern
< 1.3
< –150 dBc
500 W (at 50 °C ambient temperature)
6.5°
7-16 female
Rearside
10
12 kg
3
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
460 N / 300 N / 1020 N
Max. wind velocity
200 km/h
Height/width/depth
2574 / 258 / 103 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
dB
Front-to-back ratio
H-plane: 120°
E-plane: 6.5°
dB
10
Half-power beam width
0
Vertical Pattern
57
58
Dual Polarization + 45°/ –45° – 1800/1900
Type
Type No.
Height
[mm]
Connector
position
Page
XPol F-Panel
1710–1880
33°
19.5dBi
2°T
739 927
982
bottom
60
XPol F-Panel
1710–1880
33°
22dBi
2°T
741 623
1942
bottom
60
XPol F-Panel
XPol F-Panel
1710–1880
1710–1880
65°
65°
15.5dBi
15.5dBi
6°T
739 490
739 491
662
662
bottom or top
bottom
61
61
XPol F-Panel
XPol F-Panel
XPol F-Panel
1710–1880
1710–1990
1710–1990
65°
65°
65°
18dBi
18dBi
18dBi
2°T
6°T
739 494
739 495
739 496
1302
1302
1302
bottom or top
bottom
bottom
62
62
63
XPol F-Panel
1710–1990
65°
19.5dBi
2°T
739 498
1942
bottom
63
XPol F-Panel
1710–1990
90°
8dBi
739 695
174
bottom or top
64
XPol F-Panel
1710–1880
90°
16.5dBi
2°T
739 707
1302
bottom
65
XPol F-Panel
1710–1880
90°
17.5dBi
2°T
739 710
1902
bottom
65
59
GSM 1800
XPol
Summary – Directional Antennas
Dual Polarization + 45°/ –45°
GSM 1800 / GSM 1900 / PCS
1710–1880
X
33°
2°
XPol F-Panel 1710–1880 33° 19.5dBi 2°T
739 927
Type No.
Frequency range
1710 – 1880 MHz
Polarization
33°
+45°, –45°
Gain
2 x 19.5 dBi
+45°
Horizontal:
Vertical:
–45°
Horizontal:
Vertical:
33°
9°
33°
9°
3
dB
10
Half-power beam width
Copolar
0
Electrical tilt
Horizontal Pattern
above horizon for first sidelobe
better or equal 14 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
9°
10
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
3
Input
0
2 x 7-16 female
Vertical Pattern
Bottom
– 2° electrical downtilt
– first null-fill below horizon
better or equal –25 dB
below maximum gain
Connector position
Weight
Wind load (at 150 km/h)
dB
Sidelobe suppression
2°, fixed
7 kg
Frontal / Lateral / Rearside:
260 N / 95 N / 370 N
Max. wind velocity
200 km/h
Height/width/depth
982 / 262 / 59 mm
1710–1880
–45°
1710–1880
+45°
7-16
7-16
XPol F-Panel 1710–1880 33° 22dBi 2°T
741 623
Type No.
Frequency range
1710 – 1880 MHz
Polarization
33°
+45°, –45°
Gain
2 x 22 dBi
+45°
Horizontal:
Vertical:
–45°
Horizontal:
Vertical:
33°
5°
33°
5°
3
dB
10
Half-power beam width
Copolar
0
Electrical tilt
Sidelobe suppression
2°, fixed
above horizon for first sidelobe
better or equal 14 dB below maximum gain
Front-to-back ratio, copolar
> 30 dB
Isolation
> 30 dB
Impedance
VSWR
50 Ω
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
5°
10
3
2 x 7-16 female
Bottom
0
Vertical Pattern
2° electrical downtilt
11 kg
Frontal / Lateral / Rearside:
540 N / 210 N / 770 N
Max. wind velocity
200 km/h
Height/width/depth
1942 / 262 / 59 mm
60
Horizontal Pattern
dB
GSM 1800
XPol
F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
F-Panel
Dual Polarization
Half-power Beam Width
1710–1880
X
GSM 1800
XPol
65°
XPol F-Panel 1710–1880 65° 15.5dBi
Type No.
Frequency range
Polarization
Gain
739 490
65°
120°
1710 – 1880 MHz
+45°, –45°
2 x 15.5 dBi
Horizontal:
Vertical:
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
65°
13°
0
Horizontal Pattern
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Connector position
13°
2 x 7-16 female
10
Bottom or top
3
Weight
dB
Input
3
dB
10
Half-power beam width
Copolar +45°/ –45°
3.5 kg
0
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
150 N / 55 N / 120 N
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Vertical Pattern
1710–1880
–45°
1710–1880
+45°
7-16
7-16
XPol F-Panel 1710–1880 65° 15.5dBi 6°T
Type No.
Frequency range
Polarization
Gain
739 491
120°
1710 – 1880 MHz
65°
+45°, –45°
2 x 15.5 dBi
65°
14°
6°, fixed
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Input
2 x 7-16 female
Connector position
Bottom
Weight
3.5 kg
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
150 N / 55 N / 120 N
Max. wind velocity
200 km/h
Height/width/depth
662 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
3
0
Horizontal Pattern
14°
10
3
dB
Electrical tilt
Horizontal:
Vertical:
dB
10
Half-power beam width
Copolar +45°/ –45°
0
Vertical Pattern
6° electrical downtilt
61
1710–1880
X
65°
XPol F-Panel 1710–1880 65° 18dBi
Type No.
Frequency range
Polarization
Gain
739 494
65°
120°
1710 – 1880 MHz
+45°, –45°
2 x 18 dBi
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
65°
6.5°
0
Horizontal Pattern
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Input
Connector position
3
2 x 7-16 female
6.5°
10
Bottom or top
3
Weight
dB
Horizontal:
Vertical:
dB
10
Half-power beam width
Copolar +45°/ –45°
6 kg
0
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
310 N / 110 N / 250 N
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
Vertical Pattern
1710–1880
–45°
1710–1880
+45°
7-16
7-16
XPol F-Panel 1710–1990 65° 18dBi 2°T
Type No.
Frequency range
Polarization
Gain
739 495
120°
1710 – 1990 MHz
65°
+45°, –45°
2 x 18 dBi
Electrical tilt
Sidelobe suppression for
first sidelobe above horizon
Horizontal:
Vertical:
2°, fixed
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
Impedance
VSWR
65°
7°
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Connector position
Weight
Wind load (at 150 km/h)
7°
10
3
0
2 x 7-16 female
Vertical Pattern
Bottom
– 2° electrical downtilt
– first null-fill below horizon
better or equal –25 dB
below maximum gain
6 kg
Frontal / Lateral / Rearside:
310 N / 110 N / 250 N
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
62
0
Horizontal Pattern
50 Ω
< 1.4 (1710 – 1880 MHz)
< 1.5 (1880 – 1990 MHz)
Intermodulation IM3
(2 x 43 dBm carrier)
Input
3
dB
10
Half-power beam width
Copolar +45°/ –45°
dB
GSM 1800
XPol
F-Panel
Dual Polarization
Half-power Beam Width
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
F-Panel
Dual Polarization
Half-power Beam Width
1710–1990
X
GSM 1800
XPol
65°
XPol F-Panel 1710–1990 65° 18dBi 6°T
Type No.
Frequency range
Polarization
Gain
739 496
65°
120°
1710 – 1990 MHz
+45°, –45°
2 x 18 dBi
Horizontal:
Vertical:
Electrical tilt
6°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
VSWR
0
Horizontal Pattern
50 Ω
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Connector position
Weight
Wind load (at 150 km/h)
7°
< 1.4 (1710 – 1880 MHz)
< 1.5 (1880 – 1990 MHz)
Intermodulation IM3
(2 x 43 dBm carrier)
Input
3
10
3
dB
Impedance
65°
7°
dB
10
Half-power beam width
Copolar +45°/ –45°
0
2 x 7-16 female
Vertical Pattern
Bottom
– 6° electrical downtilt
– first null-fill below horizon
better or equal –25 dB
below maximum gain
6 kg
Frontal / Lateral / Rearside:
310 N 110 N / 250 N
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 49 mm
1710–1990
–45°
1710–1990
+45°
7-16
7-16
XPol F-Panel 1710–1990 65° 19.5dBi 2°T
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
739 498
120°
1710 – 1990 MHz
65°
+45°, –45°
2 x 19.5 dBi (1880 – 1990 MHz)
2 x 19 dBi (1710 – 1880 MHz)
Horizontal:
Vertical:
65°
5°
10
3
dB
Type No.
0
Electrical tilt
2°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 30 dB
Isolation, between ports
> 30 dB
VSWR
50 Ω
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Input
Connector position
Weight
Wind load (at 150 km/h)
5°
10
3
2 x 7-16 female
Bottom
dB
Impedance
Horizontal Pattern
0
Vertical Pattern
2° electrical downtilt
8.5 kg
Frontal / Lateral / Rearside:
480 N / 180 N / 380 N
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
63
1710 –1990
X
90°
XPol F-Panel 1710–1990 90° 8dBi
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
739 695
1710 – 1990 MHz
+45°, –45°
2 x 8 dBi
Horizontal:
Vertical:
Front-to-back ratio, copolar
> 20 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90°
55°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Input
Connector position
90°
170°
2 x 7-16 female
3
0
Horizontal Pattern
55°
10
Bottom or top
3
Weight
dB
Type No.
dB
GSM 1800
XPol
F-Panel
Dual Polarization
Half-power Beam Width
3 kg
0
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
20 N / 15 N / 30 N
Max. wind velocity
200 km/h
Height/width/depth
174 / 155 / 69 mm
64
Vertical Pattern
1710–1990
–45°
1710–1990
+45°
7-16
7-16
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
F-Panel
Dual Polarization
Half-power Beam Width
1710–1880
X
GSM 1800
XPol
90°
XPol F-Panel 1710–1880 90° 16.5dBi 2°T
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
+45°, –45°
2 x 16.5 dBi
Horizontal:
Vertical:
Electrical tilt
2°, fixed
Sidelobe suppression for
first sidelobe above horizon
≥ 14 dB
Front-to-back ratio, copolar
> 27 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
90°
7°
0
7°
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Connector position
Weight
Wind load (at 150 km/h)
3
Horizontal Pattern
Intermodulation IM3
(2 x 43 dBm carrier)
Input
90°
170°
1710 – 1880 MHz
dB
Frequency range
739 707
10
3
0
2 x 7-16 female
Bottom
6 kg
Frontal / Lateral / Rearside:
130 N / 110 N / 310 N
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 69 mm
dB
Type No.
Vertical Pattern
– 2° electrical downtilt
– first null-fill below horizon
better or equal –25 dB
below maximum gain
1710–1880
–45°
1710–1880
+45°
7-16
7-16
XPol F-Panel 1710–1880 90° 17.5dBi 2°T
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
Electrical tilt
Sidelobe suppression for
first sidelobe above horizon
739 710
+45°, –45°
2 x 17.5 dBi
Horizontal:
Vertical:
90°
5°
> 25 dB
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
200 W (at 50 °C ambient temperature)
Weight
Wind load (at 150 km/h)
0
Horizontal Pattern
≥ 14 dB
Isolation, between ports
Connector position
3
2°, fixed
Front-to-back ratio, copolar
Input
90°
170°
1710 – 1880 MHz
5°
10
3
0
2 x 7-16 female
Bottom
9 kg
Frontal / Lateral / Rearside:
190 N / 160 N / 470 N
Max. wind velocity
200 km/h
Height/width/depth
1902 / 155 / 69 mm
dB
Frequency range
dB
Type No.
Vertical Pattern
– 2° electrical downtilt
– first null-fill below horizon
better or equal –25 dB
below maximum gain
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
65
66
Summary – Directional Antennas
Dual-band
GSM 900 / GSM 1800
Dual-band 800/900 1800/2000 – Dual Polarization + 45°/ –45°
Type No.
Height
[mm]
Page
XXPol A-Panel
870–960/1710–1880
C
65°/65°
12.5/13dBi
741 316
656
68
XXPol A-Panel
XXPol A-Panel
XXPol A-Panel
870–960/1710–1880
870–960/1710–1880
824–960/1710–1880
C
65°/60°
65°/60°
65°/63°
15/16.5dBi
15/17dBi
14.5/16.5dBi
741 320
741 326
742 151
1296
1296
1296
69
70
71
XXPol A-Panel
XXPol A-Panel
870–960/1710–1880
870–960/1710–1880
C
65°/60°
65°/60°
17/18dBi
17/18.5dBi
741 322
741 327
1936
1936
72
73
XXPol A-Panel
XXPol A-Panel
870–960/1710–1880
870–960/1710–1880
C
65°/60°
65°/60°
18/19dBi
18/19.5dBi
741 324
741 328
2580
2580
74
75
XXPol A-Panel
XXPol A-Panel
XXPol A-Panel
870–960/1710–1880
870–960/1710–1880
870–960/1710–1880
C
65°/60°
65°/60°
65°/ 60°
17.5/17.5dBi
17.5/18dBi
17/18dBi
741 336
741 344
742 047
2580
2580
2580
76
77
78
C
C
0°–10°T/2°T
6°T
6°T
2°–8°T/2°T
GSM 1800
XXPol
Type
67
870 – 960
1710 –1880
X
X
65°
65°
C
XXPol A-Panel 870–960/1710–1880 C 65°/ 65° 12.5/13dBi
741 316
Type No.
Frequency range
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 12.5 dBi
2 x 13 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
65°
28°
Horizontal:
Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60°
19°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
250 W
150 W
(at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given
antenna gain values.
870 – 960 +45°/ –45° Polarization
120°
dB
3
3
870 – 960
+45°
1710 –1880
+45°
C
C
7-16
7-16
dB
10
10
870 – 960
–45°
1710 –1880
–45°
65°
28°
0
0
Horizontal Pattern
Vertical Pattern
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
Connector position*
2 x 7-16 female
Bottom or top
Weight
120°
60°
Wind load
19°
Max. wind velocity
0
Horizontal Pattern
68
3
dB
3
7 kg
Frontal:
Lateral:
Rearside:
110 N (at 150 km/h)
60 N (at 150 km/h)
240 N (at 150 km/h)
200 km/h
10
10
dB
GSM 1800
XXPol
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner
0
Vertical Pattern
Packing size
782 x 287 x 165 mm
Height/width/depth
656 / 262 / 116 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner
870 – 960
1710 –1880
X
X
65°
60°
C
GSM 1800
XXPol
XXPol A-Panel 870–960/1710–1880 C 65°/ 60° 15/16.5dBi
741 320
Type No.
Frequency range
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 16.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
65°
14°
Horizontal:
Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60°
8°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
250 W
150 W
(at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given
antenna gain values.
870 – 960 +45°/ –45° Polarization
120°
dB
3
3
1710 –1880
+45°
C
7-16
7-16
dB
10
870 – 960
+45°
C
14°
10
870 – 960
–45°
1710 –1880
–45°
65°
0
0
Horizontal Pattern
Vertical Pattern
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
Connector position*
2 x 7-16 female
Bottom or top
Weight
115°
60°
Wind load
8°
Max. wind velocity
Frontal:
Lateral:
Rearside:
220 N (at 150 km/h)
140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h
dB
0
Horizontal Pattern
3
dB
10
10
3
13 kg
0
Vertical Pattern
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
69
870 – 960
1710 –1880
X
X
65°
60°
XXPol A-Panel 870–960/1710–1880 65°/ 60° 15/17dBi
741 326
Type No.
Frequency range
900
870
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 15 dBi
2 x 17 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Front-to-back ratio, copolar
Isolation, between ports
65°
14°
Horizontal:
Vertical:
> 30 dB
60°
8°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1
> 30 dB (GSM 1800 – GSM 1800)
> 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
400 W
200 W
(at 50 °C ambient temperature)
870 – 960 +45°/ –45° Polarization
120°
65°
1710 –1880
–45°
870 – 960
–45°
870 – 960
+45°
1710 –1880
+45°
7-16
7-16
7-16
7-16
14°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
Connector position*
4 x 7-16 female
Bottom or top
Weight
115°
60°
Wind load
8°
Max. wind velocity
0
Horizontal Pattern
70
3
dB
3
13 kg
Frontal:
Lateral:
Rearside:
220 N (at 150 km/h)
140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h
10
10
dB
GSM 1800
XXPol
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
0
Vertical Pattern
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Integrated Combiner
824 – 960
1710 –1880
X
X
65°
63°
0°–10°
2°
C
GSM 1800
XXPol
XXPol A-Panel 824–960/1710–1880 C 65°/63° 14.5/16.5dBi 0°–10°T/2°T
742 151
Type No.
Frequency range
824–960
824 – 880 MHz 880 – 960 MHz
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14 dBi
2 x 14.5 dBi
2 x 16.5 dBi
Horizontal: 69°
Vertical: 14.5°
Horizontal: 65°
Vertical:
14°
Horizontal: 63°
Vertical:
8.5°
0°–10°
0°–10°
2°
Half-power beam width
Copolar +45°/ –45°
Electrical tilt
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
0° ... 6° ... 10°T 0° ... 6° ... 10°T
16 ... 13 ... 12 dB 17 ... 15 ... 13 dB
16 dB
> 30 dB
> 30 dB
> 27 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
250 W
150 W
(at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given
antenna gain values.
824 – 960 +45°/ –45° Polarization
130°
1710 –1880
–45°
65°
dB
3
3
C
7-16
7-16
0
0
Horizontal Pattern
Vertical Pattern
0°–10° electrical downtilt
continuously adjustable
120°
Mechanical specifications
Input
Adjustment
mechanism
8.5°
Max. wind velocity
10
3
dB
dB
10
Horizontal Pattern
Bottom
1x, Position bottom
continuously adjustable
Weight
63°
Wind load
0
2 x 7-16 female
Connector position
1710 –1880 +45°/ –45° Polarization
3
1710 –1880
+45°
dB
10
824 – 960
+45°
C
14°
10
824 – 960
–45°
14 kg
Frontal:
Lateral:
Rearside:
230 N (at 150 km/h)
130 N (at 150 km/h)
500 N (at 150 km/h)
200 km/h
Packing size
1422 x 287 x 165 mm
Height/width/depth
1296 / 262 / 116 mm
0
Vertical Pattern
2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
71
870 – 960
1710 –1880
X
X
65°
60°
C
XXPol A-Panel 870–960/1710–1880 C 65°/ 60° 17/18dBi
741 322
Type No.
Frequency range
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 18 dBi
Horizontal: 65°
Vertical:
9.5°
Horizontal: 60°
Vertical:
5.5°
> 15 dB
> 15 dB
Half-power beam width
Copolar +45°/ –45°
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
250 W
150 W
(at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given
antenna gain values.
870 – 960 +45°/ –45° Polarization
120°
65°
9.5°
870 – 960
–45°
1710 –1880
–45°
870 – 960
+45°
1710 –1880
+45°
10
C
C
7-16
7-16
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
Connector position*
2 x 7-16 female
Bottom or top
Weight
115°
60°
Wind load
5.5°
Max. wind velocity
0
Horizontal Pattern
72
3
dB
3
19 kg
Frontal:
Lateral:
Rearside:
330 N (at 150 km/h)
200 N (at 150 km/h)
770 N (at 150 km/h)
200 km/h
10
10
dB
GSM 1800
XXPol
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner
0
Vertical Pattern
Packing size
2057 x 287 x 165 mm
Height/width/depth
1936 / 262 / 116 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
870 – 960
1710 –1880
X
X
65°
60°
GSM 1800
XXPol
XXPol A-Panel 870–960/1710–1880 65°/ 60° 17/18.5dBi
741 327
Type No.
Frequency range
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 18.5 dBi
Horizontal: 65°
Vertical:
9.5°
Horizontal: 60°
Vertical:
5.5°
Half-power beam width
Copolar +45°/ –45°
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio, copolar
Isolation, between ports
> 15 dB
> 30 dB
> 30 dB
> 30 dB (GSM 900 – GSM 900)1
> 30 dB (GSM 1800 – GSM 1800)
> 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
400 W
200 W
(at 50 °C ambient temperature)
870 – 960 +45°/ –45° Polarization
120°
65°
9.5°
10
1710 –1880
–45°
870 – 960
–45°
870 – 960
+45°
1710 –1880
+45°
7-16
7-16
7-16
7-16
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
Connector position*
4 x 7-16 female
Bottom or top
Weight
115°
60°
Wind load
5.5°
Max. wind velocity
Frontal:
Lateral:
Rearside:
330 N (at 150 km/h)
200 N (at 150 km/h)
770 N (at 150 km/h)
200 km/h
dB
0
Horizontal Pattern
3
dB
10
10
3
19 kg
0
Vertical Pattern
Packing size
2057 x 287 x 165 mm
Height/width/depth
1936 / 262 / 116 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
73
870 – 960
1710 –1880
X
X
65°
60°
C
XXPol A-Panel 870–960/1710–1880 C 65°/ 60° 18/19dBi
741 324
Type No.
Frequency range
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 18 dBi
2 x 19 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
65°
7°
Horizontal:
Vertical:
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
60°
4°
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
250 W
150 W
(at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given
antenna gain values.
870 – 960 +45°/ –45° Polarization
120°
65°
7°
870 – 960
–45°
1710 –1880
–45°
10
870 – 960
+45°
1710 –1880
+45°
3
0
0
Horizontal Pattern
C
C
7-16
7-16
dB
3
dB
10
Vertical Pattern
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
Connector position*
Weight
115°
60°
Wind load
4°
Max. wind velocity
0
Horizontal Pattern
74
3
dB
3
2 x 7-16 female
Bottom or top
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
10
10
dB
GSM 1800
XXPol
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner
0
Vertical Pattern
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
870 – 960
1710 –1880
X
X
65°
60°
GSM 1800
XXPol
XXPol A-Panel 870–960/1710–1880 65°/ 60° 18/19.5dBi
741 328
Type No.
Frequency range
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 18 dBi
2 x 19.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Front-to-back ratio, copolar
Isolation, between ports
65°
7°
Horizontal:
Vertical:
> 30 dB
60°
4°
> 30 dB
> 30 dB (GSM 900 – GSM 900)1
> 30 dB (GSM 1800 – GSM 1800)
> 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
400 W
200 W
(at 50 °C ambient temperature)
870 – 960 +45°/ –45° Polarization
120°
65°
7°
10
1710 –1880
–45°
870 – 960
–45°
870 – 960
+45°
1710 –1880
+45°
7-16
7-16
7-16
7-16
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
Connector position*
Weight
115°
60°
Wind load
4°
Max. wind velocity
Bottom or top
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
dB
0
Horizontal Pattern
3
dB
10
10
3
4 x 7-16 female
0
Vertical Pattern
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
75
870 – 960
1710 –1880
X
X
65°
60°
6°
6°
C
XXPol A-Panel 870–960/1710–1880 C 65°/ 60° 17.5/17.5dBi 6°T
741 336
Type No.
Frequency range
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 17.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
65°
7°
Horizontal: 60°
Vertical:
6.5°
Electrical tilt
6°, fixed
6°, fixed
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
50 Ω
50 Ω
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Max. power per input
250 W
150 W
(at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given
antenna gain values.
870 – 960 +45°/ –45° Polarization
120°
65°
7°
3
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
C
7-16
7-16
Input
Connector position
60°
Weight
6.5°
0
Horizontal Pattern
76
3
dB
3
Wind load
10
10
0
Vertical Pattern
6° electrical downtilt
1710 –1880
+45°
Mechanical specifications
1710 –1880 +45°/ –45° Polarization
115°
870 – 960
+45°
C
dB
dB
3
870 – 960
–45°
1710 –1880
–45°
10
10
dB
GSM 1800
XXPol
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
Integrated Combiner
Max. wind velocity
2 x 7-16 female
Bottom
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
870 – 960
1710 –1880
X
X
65°
60°
6°
6°
GSM 1800
XXPol
XXPol A-Panel 870–960/1710–1880 65°/ 60° 17.5/18dBi 6°T
741 344
Type No.
Frequency range
870 –960
870 – 960 MHz
1710–1880
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
Gain
2 x 17.5 dBi
2 x 18 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
65°
7°
Horizontal: 60°
Vertical:
6.5°
Electrical tilt
6°, fixed
6°, fixed
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB (GSM 900 – GSM 900)1
> 30 dB (GSM 1800 – GSM 1800)
> 30 dB (GSM 900 – GSM 1800)
Impedance
50 Ω
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
50 Ω
< 1.5
< 1.5
< –150 dBc
< –150 dBc
400 W
200 W
(at 50 °C ambient temperature)
870 – 960 +45°/ –45° Polarization
120°
65°
7°
dB
3
3
0
0
Horizontal Pattern
1710 –1880
–45°
870 – 960
–45°
870 – 960
+45°
1710 –1880
+45°
7-16
7-16
7-16
7-16
dB
10
10
Vertical Pattern
6° electrical downtilt
Mechanical specifications
1710 –1880 +45°/ –45° Polarization
Input
115°
Connector position
60°
Weight
6.5°
dB
0
Horizontal Pattern
3
dB
10
10
3
Wind load
0
Vertical Pattern
6° electrical downtilt
Max. wind velocity
4 x 7-16 female
Bottom
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
77
870 – 960
1710 –1880
X
X
65°
60°
2°– 8°
2°
C
XXPol A-Panel 870–960/1710–1880 C 65°/ 60° 17/18dBi 2°–8°T/2°T
742 047
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
870900
–960
870 – 960 MHz
1800
1710–1880
1710 – 1880 MHz
+45°, –45°
+45°, –45°
2 x 17 dBi (–0.5 dB)
2 x 18 dBi (–0.5 dB)
Horizontal:
Vertical:
Electrical tilt
65°
7°
Horizontal:
Vertical:
2°– 8°, adjustable
2°, fixed
Sidelobe suppression for
first sidelobe above horizon
2° ... 4° ... 6° ... 8° T
20 ... 18 ... 17 ... 15 dB
2° T
17 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
Isolation, between ports
> 30 dB
> 30 dB
50 Ω
50 Ω
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
60°
6°
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Max. power per input
250 W
150 W
(at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given
antenna gain values.
870 – 960 +45°/ –45° Polarization
120°
65°
7°
870 – 960
–45°
1710 –1880
–45°
10
870 – 960
+45°
1710 –1880
+45°
3
0
0
Horizontal Pattern
Vertical Pattern
2°– 8° electrical downtilt
continuously adjustable
C
7-16
7-16
Mechanical specifications
Input
1710 –1880 +45°/ –45° Polarization
120°
C
dB
3
dB
10
Connector position
Adjustment
mechanism
60°
Weight
6°
0
Horizontal Pattern
78
3
dB
3
Wind load
10
10
dB
GSM 1800
XXPol
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Integrated Combiner
0
Vertical Pattern
2° electrical downtilt
Max. wind velocity
2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h
Packing size
2692 x 287 x 165 mm
Height/width/depth
2580 / 262 / 116 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Summary – Directional Antennas
Vertical Polarization
GSM 1800 / GSM 1900 / PCS
Vertical Polarization
VPol F-Panel
1710–1900
65°
10dBi
VPol F-Panel
1710–1900
65°
18dBi
VPol F-Panel
1710–1900
90°
8dBi
VPol F-Panel
1710–1900
90°
17.5dBi
2°T
2°T
Type No.
Height
[mm]
Connector
position
Page
734 304
182
bottom or top
80
735 147
1302
bottom
80
734 318
182
bottom or top
81
734 330
1942
bottom
81
GSM 1800
VPol
Type
Additional versions on request
79
F-Panel
Vertical Polarization
Half-power Beam Width
1710–1900
V
65°
VPol F-Panel 1710–1900 65° 10dBi
Type No.
Frequency range
734 304
120°
1710 – 1900 MHz
Polarization
65°
Vertical
Gain
10 dBi
> 25 dB
Impedance
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
< 1.3 (1710 – 1880 MHz)
< 1.5 (1880 – 1900 MHz)
< –150 dBc
55°
200 W (at 50 °C ambient temperature)
7-16 female
10
Bottom or top
Weight
Wind load (at 150 km/h)
0
Horizontal Pattern
1.3 kg
Frontal / Lateral / Rearside:
30 N / 5 N / 40 N
Max. wind velocity
200 km/h
Height/width/depth
182 / 155 / 36 mm
3
dB
VSWR
50 Ω
3
0
Vertical Pattern
VPol F-Panel 1710–1900 65° 18dBi 2°T
Type No.
Frequency range
Polarization
Gain
735 147
120°
1710 – 1900 MHz
65°
Vertical
18 dBi
Electrical downtilt
Side lobe suppression
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
H-plane: 65°
E-plane: 7°
2°, fixed
above horizon for first sidelobe
better or equal 14 dB below maximum gain
3
dB
10
Half-power beam width
0
Horizontal Pattern
> 25 dB
50 Ω
< 1.3 (1710 – 1880 MHz)
< 1.5 (1880 – 1900 MHz)
< –150 dBc
200 W (at 50 °C ambient temperature)
7-16 female
7°
10
3
dB
GSM 1800
VPol
Front-to-back ratio
H-plane: 65°
E-plane: 55°
dB
10
Half-power beam width
0
Connector position
Bottom
Vertical Pattern
Weight
4.6 kg
– 2° electrical downtilt
– first null-fill below horizon
better or equal to –25 dB
below maximum gain
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
260 N / 55 N / 310 N
Max. wind velocity
200 km/h
Height/width/depth
1302 / 155 / 36 mm
80
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
F-Panel
Vertical Polarization
Half-power Beam Width
1710–1900
V
90°
VPol F-Panel 1710–1900 90° 8dBi
Gain
Half-power beam width
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
Wind load (at 150 km/h)
Vertical
8 dBi
H-plane: 90°
E-plane: 55°
3
> 19 dB
GSM 1800
VPol
Polarization
90°
180°
1710 – 1900 MHz
dB
Frequency range
734 318
0
Horizontal Pattern
50 Ω
< 1.3 (1710 – 1880 MHz)
< 1.5 (1880 – 1900 MHz)
< –150 dBc
55°
200 W (at 50 °C ambient temperature)
7-16 female
10
Bottom or top
3
1.4 kg
0
Frontal / Lateral / Rearside:
30 N / 15 N / 40 N (at 150 km/h)
Max. wind velocity
200 km/h
Height/width/depth
182 / 155 / 49 mm
dB
Type No.
Vertical Pattern
VPol F-Panel 1710–1900 90° 17.5dBi 2°T
Polarization
Gain
Half-power beam width
Electrical downtilt
Sidelobe suppression
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
734 330
90°
180°
1710 – 1900 MHz
Vertical
17.5 dBi
H-plane: 90°
E-plane: 5°
3
2°, fixed
dB
Frequency range
0
Horizontal Pattern
above horizon for first sidelobe
better or equal 14 dB below maximum gain
> 23 dB
50 Ω
< 1.3 (1710 – 1880 MHz)
< 1.5 (1880 – 1900 MHz)
5°
< –150 dBc
10
200 W (at 50 °C ambient temperature)
3
7-16 female
dB
Type No.
0
Connector position
Bottom
Vertical Pattern
Weight
6.9 kg
– 2° electrical downtilt
– first null-fill below horizon
better or equal to –25 dB
below maximum gain
Wind load (at 150 km/h)
Frontal / Lateral / Rearside:
380 N / 180 N / 480 N
Max. wind velocity
200 km/h
Height/width/depth
1942 / 155 / 49 mm
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
81
82
Summary – Directional Antennas
Dual Polarization + 45°/ –45°
UMTS / GSM 1800 / GSM 1900/ PCS
Type
Type No.
0°–12°T 800 10251
0°–8°T 742 351
Height
[mm]
Page
1032
1304
84
85
XPol F-Panel
XPol F-Panel
1710–2170
1710–2170
33°
33°
20dBi
21dBi
XPol F-Panel
XPol F-Panel
1710–2170
1710–2180
45°
45°
19.5dBi
21.5dBi
0°–8°T
0°–6°T
742 218
742 219
1306
1946
86
87
XPol
XPol
XPol
XPol
XPol
XPol
XPol
XPol
XPol
XPol
XPol
XPol
XPol
XPol
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel IRT + ISB
F-Panel
F-Panel
F-Panel
F-Panel
1710–2170
1710–2170
1710–2200
1710–2170
1710–2200
1710–2170
1710–2200
1710–2200
1710–2200
1710–2200
1710–2200
1710–2200
1710–2170
1710–2170
65°
65°
65°
65°
65°
65°
65°
65°
65°
65°
65°
65°
65°
65°
9dBi
12dBi
15.5dBi
15.5dBi
15.5dBi
16dBi
18dBi
18dBi
18dBi
18dBi
18.3dBi
18.3dBi
19.5dBi
20.5dBi
0°T
2°T
6°T
0°–10°T
0°–12°T
0°T
6°T
0°–10°T
0°–10°T
0°–10°T
0°T
2°T
0°–6°T
0°T
742 210
739 489
800 10424
742 211
800 10247
742 196
800 10428
742 215
800 10314
800 10414
800 10425
800 10426
742 213
742 186
155
342
735
662
735
735
1302
1302
1302
1380
1302
1302
1942
2160
88
89
90
91
92
93
94
95
96
97
98
99
100
101
XPol
XPol
XPol
XPol
XPol
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel
1710–2170
1710–2170
1710–2200
1710–2200
1710–2170
88°
88°
88°
88°
88°
11.5dBi
14dBi
17dBi
17dBi
18dBi
0°T
0°–10°T
2°T
0°–8°T
0°–6°T
984
988
987
989
990
342
662
1302
1302
1942
102
103
104
105
106
65°
65°
65°
65°
15.5dBi
18dBi
18dBi
19.5dBi
0°–12°T
0°–10°T
0°–10°T
0°–6°T
10375
10360
10270
10271
1241
1823
2296
2945
107
108
109
110
741
741
741
741
741
Tri-Sector Pipe Antennas
XPol Tri-Sector
XPol Tri-Sector
XPol Tri-Sector
XPol Tri-Sector
Pipe
Pipe
Pipe
Pipe
1710–2170
1710–2170
1710–2170
1710–2170
Connector position: Please refer to page for details.
800
800
800
800
New Products
83
UMTS
XPol
Dual Polarization + 45°/ –45° – 1800/1900/2000
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
X
33°
0°– 12°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2170 33° 20dBi 0°–12°T
800 10251
Type No.
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 19.2 dBi
2 x 19.5 dBi
2 x 19.8 dBi
Horizontal: 36°
Vertical:
9.2°
Electrical tilt
continuously adjustable
0°– 12°
0°– 12°
0°– 12°
0° ... 6° ... 12° T
15 ... 17 … 17 dB
> 18 dB
0° ... 6° ... 12° T
15 ... 17 ... 17 dB
> 17 dB
0° ... 6° ... 12° T
15 ... 17 ... 17 dB
> 15 dB
> 30 dB
> 30 dB
> 30 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
Sidelobe suppression:
Vertical Pattern – first sidelobe above main beam
Horizontal Pattern
Front-to-back ratio, copolar
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±30°
Isolation, between ports
Horizontal:
Vertical:
1920 – 2170 MHz
Half-power beam width
Copolar +45°/ –45°
35°
9°
Horizontal: 33°
Vertical:
8.5°
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
36°
10
3
0
dB
dB
3
9.2°
10
0
Horizontal Pattern
Vertical Pattern
0°– 12° electrical downtilt
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
1850 – 1990 MHz: +45°/ –45° Polarization
35°
10
Mechanical specifications
3
0
Input
dB
dB
3
9°
10
Horizontal Pattern
Vertical Pattern
0°– 12° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
33°
8,5°
Max. wind velocity
0
Horizontal Pattern
84
3
Packing size
dB
3
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
10
2 x 7-16 female
Connector position
0
dB
UMTS
XPol
Frequency range
Height/width/depth
11.5 kg
Frontal:
Lateral:
Rearside:
460 N (at 150 km/h)
90 N (at 150 km/h)
460 N (at 150 km/h)
200 km/h
1336 x 337 x 112 mm
1032 / 299 / 69 mm
0
Vertical Pattern
0°– 12° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
X
33°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2170 33° 21dBi 0°–8°T
742 351
Frequency range
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 20.2 dBi
2 x 20.5 dBi
2 x 20.7 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 36°
Vertical:
7.4°
Horizontal: 35°
Vertical:
7.0°
Horizontal: 33°
Vertical:
6.7°
Electrical tilt
continuously adjustable
0°– 8°
0°– 8°
0°– 8°
Sidelobe suppression:
Vertical Pattern – first sidelobe above main beam
Horizontal Pattern
0° ... 4° ... 8° T
18 ... 17 … 16 dB
> 14 dB
0° ... 4° ... 8° T
18 ... 18 ... 17 dB
> 14 dB
0° ... 4° ... 8° T
18 ... 17 ... 16 dB
> 14 dB
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 30 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
> 30 dB
Cross polar ratio
Maindirection
Sector
0°
±30°
Isolation, between ports
1920 – 2170 MHz
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
UMTS
XPol
Type No.
1710 – 1880 MHz: +45°/ –45° Polarization
36°
10
3
0
dB
10
dB
3
7.4°
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
1850 – 1990 MHz: +45°/ –45° Polarization
35°
10
Mechanical specifications
10
3
0
Input
dB
dB
3
7°
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
33°
6.7°
Max. wind velocity
10
0
Horizontal Pattern
3
Packing size
dB
dB
3
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
10
2 x 7-16 female
Connector position
0
Height/width/depth
13.5 kg
Frontal:
Lateral:
Rearside:
570 N (at 150 km/h)
110 N (at 150 km/h)
570 N (at 150 km/h)
200 km/h
1589 x 322 x 108 mm
1304 / 299 / 69 mm
0
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
85
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
X
45°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2170 45° 19.5dBi 0°–8°T
742 218
Type No.
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 19 dBi
2 x 19.5 dBi
2 x 19.6 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 47°
Vertical:
7.3°
Electrical tilt
continuously adjustable
0°– 8°
Sidelobe suppression:
Vertical Pattern – first sidelobe above main beam
Horizontal Pattern
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±30°
Isolation, between ports
Horizontal:
Vertical:
1920 – 2170 MHz
45°
7°
Horizontal: 44°
Vertical:
6.7°
0°– 8°
0°– 8°
0° ... 2° ... 5° ... 8° T
0° ... 2° ... 5° ... 8° T
0° ... 2° ... 5° ... 8° T
17 ... 17 ... 15 ... 15 dB 18 ... 18 ... 17 ... 17 dB 18 ... 18 ... 15 ... 15 dB
> 18 dB
> 18 dB
> 18 dB
Copolar:
> 27 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 27 dB
Total power: > 25 dB
Typically: 18 dB
> 13 dB
Typically: 18 dB
> 13 dB
Typically: 18 dB
> 13 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
47°
7.3°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
1850 – 1990 MHz: +45°/ –45° Polarization
45°
7°
3
0
Input
dB
3
Mechanical specifications
10
dB
10
Horizontal Pattern
2 x 7-16 female
Connector position
0
Vertical Pattern
0°– 8° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
44°
10.2 kg
Frontal:
Lateral:
Rearside:
250 N (at 150 km/h)
110 N (at 150 km/h)
390 N (at 150 km/h)
6.7°
Max. wind velocity
10
3
0
Horizontal Pattern
86
3
Packing size
dB
10
dB
UMTS
XPol
Frequency range
Height/width/depth
200 km/h
1604 x 221 x 107 mm
1306 / 199 / 69 mm
0
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2180
X
45°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2180 45° 21.5dBi 0°–6°T
742 219
Frequency range
Polarization
Average gain (dBi)
Tilt
1710 – 1880 MHz
1710–2180
1850 – 1990 MHz
+45°, –45°
+45°, –45°
+45°, –45°
20.5 ... 20.5 ... 20.1
21 ... 21 ... 20.6
21.2 ... 21.4 ... 21
1920 – 2180 MHz
0° ... 3° ... 6°
0° ... 3° ... 6°
0° ... 3° ... 6°
Half-power beam width
Copolar +45°/ –45°
Horizontal: 48°
Vertical:
4.8°
Horizontal: 45°
Vertical:
4.6°
Horizontal: 44°
Vertical:
4.4°
Electrical tilt
continuously adjustable
0°– 6°
0°– 6°
0°– 6°
Sidelobe suppression:
Vertical Pattern – first sidelobe above main beam
Horizontal Pattern
Front-to-back ratio, copolar
total power
Cross polar ratio
Maindirection
Sector
0°
±30°
Isolation, between ports
UMTS
XPol
Type No.
0° ... 2° ... 4° ... 6°T
0° ... 2° ... 4° ... 6°T
0° ... 2° ... 4° ... 6°T
18 ... 18 ... 16 ... 16 dB 18 ... 18 ... 17 ... 16 dB 18 ... 18 ... 17 ... 16 dB
> 18 dB
> 18 dB
> 18 dB
> 30 dB
> 25 dB
> 27 dB
> 25 dB
> 25 dB
> 25 dB
Typically: 19 dB
> 13 dB
Typically: 18 dB
> 13 dB
Typically: 17 dB
> 13 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
48°
4.8°
3
0
dB
3
10
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2180
–45°
1710 – 2180
+45°
7-16
7-16
45°
4.6°
Mechanical specifications
3
0
Input
dB
3
10
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1920 – 2180 MHz: +45°/ –45° Polarization
Adjustment
mechanism
44°
4.4°
0
Horizontal Pattern
3
dB
dB
3
Max. wind velocity
Packing size
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
10
2 x 7-16 female
Connector position
Height/width/depth
14 kg
Frontal:
Lateral:
Rearside:
390 N (at 150 km/h)
180 N (at 150 km/h)
590 N (at 150 km/h)
200 km/h
2244 x 221 x 107 mm
1946 / 199 / 69 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
87
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2170
X
65°
0°
XPol F-Panel 1710–2170 65° 9dBi 0°T
742 210
Type No.
Frequency range
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 8.5 dBi
2 x 8.6 dBi
2 x 8.7 dBi
Horizontal:
Vertical:
70°
65°
Horizontal:
Vertical:
68°
65°
Horizontal:
Vertical:
65°
63°
Electrical tilt
0°, fixed
0°, fixed
0°, fixed
Front-to-back ratio, copolar
> 25 dB
> 30 dB
> 30 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
135°
70°
3
dB
dB
3
65°
10
10
0
0
Horizontal Pattern
Vertical Pattern
1850 – 1990 MHz: +45°/ –45° Polarization
130°
68°
1710 – 2170
+45°
7-16
7-16
65°
3
0
Mechanical specifications
dB
dB
3
1710 – 2170
–45°
10
10
Input
0
Horizontal Pattern
Vertical Pattern
Connector position*
2 x 7-16 female
Bottom or top
Weight
1920 – 2170 MHz: +45°/ –45° Polarization
127°
65°
0
Horizontal Pattern
88
3
Wind load
Max. wind velocity
1.5 kg
Frontal:
Lateral:
Rearside:
20 N (at 150 km/h)
15 N (at 150 km/h)
40 N (at 150 km/h)
200 km/h
Packing size
257 x 172 x 92 mm
Height/width/depth
155 / 155 / 69 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
dB
3
63°
10
10
dB
UMTS
XPol
Half-power beam width
Copolar +45°/ –45°
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2170
X
65°
2°
XPol F-Panel 1710–2170 65° 12dBi 2°T
739 489
Type No.
Frequency range
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 11.5 dBi
2 x 12 dBi
2 x 12 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
67°
32°
Horizontal:
Vertical:
65°
30°
Horizontal:
Vertical:
63°
28°
3°, fixed
2°, fixed
0°, fixed
Front-to-back ratio, copolar
> 30 dB
> 30 dB
> 27 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
UMTS
XPol
Electrical tilt
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
125°
67°
32°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Vertical Pattern
3° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
120°
65°
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
30°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern
2° electrical downtilt
Input
2 x 7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight
Wind load
115°
63°
28°
Max. wind velocity
dB
3
0
Horizontal Pattern
3
dB
10
10
Bottom
2 kg
Frontal:
Lateral:
Rearside:
35 N (at 150 km/h)
25 N (at 150 km/h)
80 N (at 150 km/h)
200 km/h
Packing size
444 x 172 x 92 mm
Height/width/depth
342 / 155 / 69 mm
0
Vertical Pattern
0° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
89
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2200
X
65°
6°
XPol F-Panel 1710–2200 65° 15.5dBi 6°T
800 10424
Type No.
Frequency range
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 15.2 dBi
2 x 15.5 dBi
2 x 15.7 dBi
66°
66°
64°
1920 – 2200 MHz
Horizontal Pattern:
Half-power beam width
Cross polar ratio
Sector
0°
±60°
> 30 dB
> 30 dB
> 30 dB
Typically: 19 dB
> 10 dB
Typically: 18 dB
> 10 dB
Typically: 18 dB
> 10 dB
Vertical Pattern:
Half-power beam width
13.1°
12.2°
11.1°
Electrical tilt
6°, fixed
6°, fixed
6°, fixed
Sidelobe suppression for first
sidelobe above main beam
> 15 dB
> 18 dB
> 18 dB
First null-fill below main beam
Typically: 25 dB
Typically: 25 dB
Typically: 25 dB
Impedance
50 Ω
VSWR
< 1.3
Isolation, between ports
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
250 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
125°
66°
13.1°
10
dB
3
dB
10
3
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
125°
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
66°
12.2°
10
dB
3
dB
10
Mechanical specifications
3
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
Input
120°
Height/width/depth
dB
3
Max. wind velocity
Packing size
10
10
3
Bottom
Weight
64°
11.1°
2 x 7-16 female
Connector position
Wind load
dB
UMTS
XPol
Front-to-back ratio, copolar
3.7 kg
Frontal:
Lateral:
Rearside:
75 N (at 150 km/h)
55 N (at 150 km/h)
180 N (at 150 km/h)
200 km/h
1000 x 172 x 95 mm
735 / 155 / 69 mm
0
0
Horizontal Pattern
90
Vertical Pattern
6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
X
65°
0°–10°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2170 65° 15.5dBi 0°–10°T
742 211
Frequency range
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14.7 dBi
2 x 15 dBi
2 x 15.2 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 69°
Vertical: 14.5°
Electrical tilt
continuously adjustable
0°– 10°
Horizontal:
Vertical:
1920 – 2170 MHz
67°
14°
Horizontal:
Vertical:
0°– 10°
64°
13°
0°– 10°
Vertical Pattern – sidelobe
0° ... 4° ... 8° ... 10°T
0° ... 4° ... 8° ... 10°T
suppression for first sidelobe 18 ... 16 ... 15 .... 15 dB 18 ... 18 ... 18 ... 18 dB
above main beam
0° ... 4° ... 8° ... 10°T
18 ... 18 ... 18 ... 16 dB
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.4
< 1.4
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
UMTS
XPol
Type No.
1710 – 1880 MHz: +45°/ –45° Polarization
130°
69°
14.5°
10
dB
3
dB
10
3
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
128°
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
67°
14°
Input
dB
dB
3
Mechanical specifications
10
10
3
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
64°
13°
Max. wind velocity
dB
3
dB
10
10
3
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
120°
2 x 7-16 female
Connector position
0
4.5 kg
Frontal:
Lateral:
Rearside:
65 N (at 150 km/h)
50 N (at 150 km/h)
160 N (at 150 km/h)
200 km/h
Packing size
924 x 172 x 92 mm
Height/width/depth
662 / 155 / 69 mm
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
91
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2200
X
65°
0°–12°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2200 65° 15.5dBi 0°–12°T
800 10247
Type No.
Frequency range
Polarization
Gain
per input
Half-power beam width
Copolar +45°/ –45°
Sidelobe suppression for first
sidelobe above main beam
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
1710–2200
1850 – 1990 MHz
+45°, –45°
+45°, –45°
+45°, –45°
0° ... 4° ... 8° ... 12° T
15.5 ... 15.4 ... 15.3 ...15.1 dBi
0° ... 4° ... 8° ... 12° T
15.6 ... 15.5 ... 15.4 ...15 dBi
0° ... 4° ... 8° ... 12° T
15.8 ... 15.7 ... 15.5 ...14.9 dBi
Horizontal: 67°
Vertical: 12.9°
Horizontal: 66°
Vertical: 12.3°
Horizontal: 64°
Vertical: 11.5°
0°– 12°
0°– 12°
0°– 12°
0° ... 4° ... 8° ... 12° T
> 14 ... 14 ... 14 ... 14 dB
0° ... 4° ... 8° ... 12° T
> 14 ... 14 ... 14 ... 14 dB
Copolar: > 27 dB
Copolar: > 27 dB
Copolar: > 27 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Isolation, between ports
1920 – 2200 MHz
0° ... 4° ... 8° ... 12° T
> 14 ... 14 ... 14 ... 14 dB
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
122°
67°
12.9°
10
dB
3
dB
10
3
0
0
Horizontal Pattern
Vertical Pattern
0°– 12° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
122°
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
66°
12.3°
Input
dB
dB
3
Mechanical specifications
10
10
3
0
Horizontal Pattern
Vertical Pattern
0°– 12° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
Adjustment
mechanism
64°
11.5°
Max. wind velocity
10
3
Packing size
dB
10
3
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
120°
2 x 7-16 female
Connector position
0
dB
UMTS
XPol
Electrical tilt continuously adjust.
1710 – 1880 MHz
Height/width/depth
4.5 kg
Frontal:
Lateral:
Rearside:
75 N (at 150 km/h)
55 N (at 150 km/h)
180 N (at 150 km/h)
200 km/h
1015 x 172 x 92 mm
735 / 155 / 69 mm
0
0
Horizontal Pattern
92
Vertical Pattern
0°– 12° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2170
X
65°
0°
XPol F-Panel 1710–2170 65° 16dBi 0°T
742 196
Frequency range
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 15.3 dBi
2 x 15.6 dBi
2 x 15.8 dBi
Horizontal: 67°
Vertical: 12.6°
Horizontal: 66°
Vertical: 11.8°
> 14 dB
> 16 dB
> 14 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Half-power beam width
Copolar +45°/ –45°
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
Horizontal:
Vertical:
64°
11°
UMTS
XPol
Type No.
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
125°
67°
12.6°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
1850 – 1990 MHz: +45°/ –45° Polarization
125°
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
66°
11.8°
dB
3
3
dB
10
10
0
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern
Input
1920 – 2170 MHz: +45°/ –45° Polarization
120°
Connector position
11.1°
3
dB
dB
3
Max. wind velocity
10
10
0
0
Horizontal Pattern
Bottom or top
Weight
Wind load
64°
2 x 7-16 female
Packing size
Height/width/depth
3.7 kg
Frontal:
Lateral:
Rearside:
75 N (at 150 km/h)
55 N (at 150 km/h)
180 N (at 150 km/h)
200 km/h
1000 x 172 x 95 mm
735 / 155 / 69 mm
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
93
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2200
X
65°
6°
XPol F-Panel 1710–2200 65° 18dBi 6°T
800 10428
Type No.
Frequency range
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.7 dBi
2 x 17.9 dBi
2 x 18.1 dBi
67°
65°
63°
1920 – 2200 MHz
Horizontal Pattern:
Half-power beam width
Cross polar ratio
Sector
0°
±60°
> 27 dB
> 33 dB
> 33 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Vertical Pattern:
Half-power beam width
6.7°
6.3°
5.8°
Electrical tilt
6°, fixed
6°, fixed
6°, fixed
Sidelobe suppression for first
sidelobe above main beam
> 14 dB
> 14 dB
> 15 dB
First null-fill below main beam
Typically: 25 dB
Typically: 25 dB
Typically: 25 dB
Impedance
50 Ω
VSWR
< 1.3
Isolation, between ports
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
124°
67°
6.7°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
124°
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
65°
6.3°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern
6° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
Input
118°
3
3
dB
10
10
Bottom
Weight
63°
5.8°
2 x 7-16 female
Connector position
Wind load
dB
UMTS
XPol
Front-to-back ratio, copolar
Max. wind velocity
6.6 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)
110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
0
Horizontal Pattern
94
Vertical Pattern
6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2200
X
65°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2200 65° 18dBi 0°–10°T
742 215
Type No.
Frequency range
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
1920 – 2200 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.7 dBi
2 x 17.9 dBi
2 x 18 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 67°
Vertical:
6.8°
Horizontal: 66°
Vertical:
6.5°
Horizontal: 65°
Vertical:
6.2°
Electrical tilt
continuously adjustable
0°– 10°
0°– 10°
0°– 10°
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
UMTS
XPol
Vertical Pattern – sidelobe
0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T
suppression for first sidelobe 18 ... 17 ... 17 ... 17 dB 18 ... 18 ... 17 ... 17 dB 18 ... 18 ... 17 ... 18 dB
above main beam
1710 – 1880 MHz: +45°/ –45° Polarization
127°
67°
6.8°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
125°
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
66°
6.5°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
120°
2 x 7-16 female
Connector position
0
65°
7.5 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)
110 N (at 150 km/h)
310 N (at 150 km/h)
6.2°
Max. wind velocity
dB
3
0
Horizontal Pattern
3
dB
10
10
200 km/h
Packing size
1574 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
95
Multi-band F-Panel
1710 –2200
X
Dual Polarization
65°
Half-power Beam Width
Integrated Remote Tilt
IRT
Adjust. Electrical Downtilt
0°– 10°
XPol F-Panel IRT 1710–2200 65° 18dBi 0°–10°T
800 10314
Type No.
A) Antenna specifications
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
1920 – 2200 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.7 dBi
2 x 17.9 dBi
2 x 18 dBi
Frequency range
Horizontal Pattern:
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
67°
66°
65°
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
7.1°
6.8°
6.6°
Vertical Pattern:
Half-power beam width
Electrical tilt
0°– 10°, continuously adjustable
Sidelobe suppression for first 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T
sidelobe above main beam
16 ... 16 ... 16 ... 16 dB 17 ... 17 ... 17 ... 17 dB 17 ... 17 ... 17 ... 17 dB
Impedance
50 Ω
VSWR
< 1.5
Isolation, between ports
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
120 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
127°
67°
7.1°
dB
3
3
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
in
IRT
out
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
125°
6.8°
3
dB
dB
3
Power consumption
Hardware interface1)
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
120°
6.6°
3
0
Horizontal Pattern
96
3
dB
10
10
0
10 ... 30 V
< 1 W (stand by)
< 8.5 W (motor activated)
2 x 8pin connector acc. IEC 60130-9;
according to AISG:
– IRT in (male): Control / Daisy chain in
– IRT out (female): Daisy chain out
Logical interface2)
HEX coded commands based on
HDLC protocol; according to AISG
Adjustment time
(full range)
40 sec.
Adjustment cycles
65°
8pin
8pin
male female
B) IRT specifications
Power supply
66°
dB
UMTS
XPol
Half-power beam width
> 50,000
1)
Tightning torque for fixing the connector must lie between
0.5 – 1.0 Nm.
2)
Please note: The SW of the unit, which is controlling the remote
tilt unit, has to be able to handle also an integrated remote tilt
unit, like Kathrein CCU with firmware 1.29 or higher and the
Kathrein PCA with software 2.2 or higher.
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band F-Panel
1710 –2200
X
Dual Polarization
Half-power Beam Width
65°
Integrated Remote Tilt + Smart Bias-T
Preliminary Issue
IRT + ISB
0°– 10°
Adjust. Electrical Downtilt
XPol F-Panel IRT 1710–2200 65° 18dBi 0°–10°T
800 10414
Type No.
A) Antenna specifications
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
1920 – 2200 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.7 dBi
2 x 17.9 dBi
2 x 18 dBi
67°
66°
65°
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
6.5°
6.2°
Frequency range
Half-power beam width
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
UMTS
XPol
Horizontal Pattern:
Vertical Pattern:
Half-power beam width
6.8°
Electrical tilt
0°– 10°, continuously adjustable
Sidelobe suppression for first 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T
sidelobe above main beam
18 ... 17 ... 17 ... 17 dB 18 ... 18 ... 17 ... 17 dB 18 ... 18 ... 17 ... 18 dB
Impedance
50 Ω
VSWR
< 1.5
Isolation, between ports
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
75 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
127°
67°
6.8°
10
10
1710 – 2200
–45°
3
dB
IRT
dB
3
1710 – 2200
+45°
0
0
Horizontal Pattern
ISB
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
125°
66°
3
Power supply
0
< 1 W (stand by)
< 8.5 W (motor activated)
Hardware interface
IRT supply and control via integrated smart Bias-T:
Input: 7-16 female (–45°)
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
120°
65°
6.2°
10
0
Horizontal Pattern
3
Modem carrier
frequency
2.176 MHz
Modem data rate
9.6 kB
Software interface
HEX coded commands based on
HDLC protocol; according to 3GPP
Adjustment time
(full range)
Adjustment cycles
40 sec.
> 50,000
dB
3
dB
10
10 ... 30 V
Power consumption
dB
10
dB
3
7-16
B) IRT + ISB specifications
6.5°
10
7-16
0
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
97
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2200
X
65°
0°
XPol F-Panel 1710–2200 65° 18.3dBi 0°T
800 10425
Type No.
Frequency range
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.9 dBi
2 x 18.1 dBi
2 x 18.3 dBi
67°
66°
64°
1920 – 2200 MHz
Horizontal Pattern:
Half-power beam width
Cross polar ratio
Sector
0°
±60°
> 30 dB
> 30 dB
> 30 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Vertical Pattern:
Half-power beam width
6.6°
6.2°
5.8°
Electrical tilt
0°, fixed
0°, fixed
0°, fixed
Sidelobe suppression for first
sidelobe above main beam
> 14 dB
> 15 dB
> 16 dB
First null-fill below main beam
Typically: 25 dB
Typically: 25 dB
Typically: 25 dB
Impedance
50 Ω
VSWR
< 1.4
Isolation, between ports
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
125°
67°
6.6°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
1850 – 1990 MHz: +45°/ –45° Polarization
125°
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
66°
6.2°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Input
Vertical Pattern
2 x 7-16 female
Connector position
1920 – 2200 MHz: +45°/ –45° Polarization
120°
64°
5.8°
3
0
Horizontal Pattern
98
3
dB
10
10
Bottom
Weight
Wind load
dB
UMTS
XPol
Front-to-back ratio, copolar
Max. wind velocity
6.6 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)
110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2200
X
65°
2°
XPol F-Panel 1710–2200 65° 18.3dBi 2°T
800 10426
Type No.
Frequency range
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.9 dBi
2 x 18.1 dBi
2 x 18.3 dBi
66°
65°
63°
1920 – 2200 MHz
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Sector
0°
±60°
> 28 dB
> 30 dB
> 33 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
UMTS
XPol
Horizontal Pattern:
Vertical Pattern:
Half-power beam width
6.6°
6.2°
5.8°
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for first
sidelobe above main beam
> 14 dB
> 15 dB
> 15 dB
First null-fill below main beam
Typically: 25 dB
Typically: 25 dB
Typically: 25 dB
Impedance
50 Ω
VSWR
< 1.4
Isolation, between ports
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
122°
66°
6.6°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
2° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
122°
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
65°
6.2°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern
2° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
Input
63°
5.8°
dB
3
3
dB
10
10
Bottom
Weight
Wind load
118°
2 x 7-16 female
Connector position
Max. wind velocity
6.6 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)
110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
0
Horizontal Pattern
Vertical Pattern
2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
99
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
X
65°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2170 65° 19.5dBi 0°–6°T
742 213
Type No.
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 19 dBi
2 x 19.2 dBi
2 x 19.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 67°
Vertical:
4.7°
Horizontal: 65°
Vertical:
4.5°
Horizontal: 63°
Vertical:
4.3°
Electrical tilt
continuously adjustable
0°– 6°
0°– 6°
0°– 6°
1920 – 2170 MHz
Vertical Pattern – sidelobe
0° ... 2° ... 4° ... 6° T
0° ... 2° ... 4° ... 6° T
suppression for first sidelobe 18 ... 17 ... 15 .... 15 dB 18 ... 18 ... 17 ... 15 dB
above main beam
0° ... 2° ... 4° ... 6° T
18 ... 18 ... 17 ... 15 dB
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
125°
67°
4.7°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
120°
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
65°
4.5°
3
Input
dB
dB
3
Mechanical specifications
10
10
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
63°
4.3°
3
0
Horizontal Pattern
100
3
dB
10
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
115°
2 x 7-16 female
Connector position
0
0
dB
UMTS
XPol
Frequency range
Max. wind velocity
10 kg
Frontal:
Lateral:
Rearside:
195 N (at 150 km/h)
160 N (at 150 km/h)
480 N (at 150 km/h)
200 km/h
Packing size
2214 x 172 x 92 mm
Height/width/depth
1942 / 155 / 69 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2170
X
65°
0°
XPol F-Panel 1710–2170 65° 20.5dBi 0°T
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
1710–2170
1850 – 1990 MHz
1920 – 2170 MHz
+45°, –45°
+45°, –45°
+45°, –45°
20 dBi
20.2 dBi
20.5 dBi
Horizontal: 65°
Vertical:
3.8°
Horizontal: 61°
Vertical:
3.5°
Copolar:
> 30 dB
Total power: > 28 dB
Copolar:
> 30 dB
Total power: > 28 dB
Copolar:
> 30 dB
Total power: > 27 dB
Typically: 25 dB
> 14 dB
Typically: 25 dB
> 14 dB
Typically: 25 dB
> 14 dB
Horizontal:
Vertical:
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
1710 – 1880 MHz
0°
±60°
67°
4°
Isolation, between ports
UMTS
XPol
742 186
Type No.
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
127°
67°
4°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
1850 – 1990 MHz: +45°/ –45° Polarization
120°
65°
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
3.8°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern
Input
7-16 female
Connector position
1920 – 2170 MHz: +45°/ –45° Polarization
Weight
Wind load
115°
Bottom
61°
9.5 kg
Frontal:
Lateral:
Rearside:
215 N (at 150 km/h)
185 N (at 150 km/h)
530 N (at 150 km/h)
3.5°
Max. wind velocity
dB
3
3
dB
10
10
200 km/h
Packing size
2271 x 172 x 92 mm
Height/width/depth
2160 / 155 / 69 mm
0
0
Horizontal Pattern
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
101
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Excellent Sidelobe Suppression
1710 –2170
X
88°
20 dB
XPol F-Panel 1710–2170 88° 11.5dBi
741 984
Type No.
Frequency range
1710–2170
1850 – 1990 MHz
1710 – 1880 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 11.3 dBi
2 x 11.5 dBi
2 x 11.6 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Sidelobe suppression
vertical sector ±45°
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
86°
28°
Horizontal:
Vertical:
87°
26°
Horizontal:
Vertical:
88°
26°
> 20 dB
> 20 dB
> 20 dB
Copolar:
> 23 dB
Total power: > 23 dB
Copolar:
> 23 dB
Total power: > 23 dB
Copolar:
> 23 dB
Total power: > 23 dB
Typically: 20 dB
> 18 dB
Typically: 25 dB
> 18 dB
Typically: 20 dB
> 15 dB
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
86°
155°
28°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
87°
160°
26°
10
Mechanical specifications
3
0
dB
3
dB
10
Input
0
Horizontal Pattern
Connector position*
Vertical Pattern
Wind load
88°
160°
Max. wind velocity
26°
10
3
0
Horizontal Pattern
102
3
dB
10
2 x 7-16 female
Bottom or top
Weight
1920 – 2170 MHz: +45°/ –45° Polarization
dB
UMTS
XPol
1920 – 2170 MHz
2 kg
Frontal:
Lateral:
Rearside:
35 N (at 150 km/h)
25 N (at 150 km/h)
80 N (at 150 km/h)
200 km/h
Packing size
444 x 172 x 92 mm
Height/width/depth
342 / 155 / 69 mm
* Inverted mounting:
Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
X
88°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2170 88° 14dBi 0°–10°T
741 988
Type No.
Frequency range
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 13.7 dBi
2 x 14 dBi
2 x 14.1 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 88°
Vertical: 14.7°
Electrical tilt
continuously adjustable
0° – 10°
Horizontal:
Vertical:
1920 – 2170 MHz
88°
14°
Horizontal:
Vertical:
0° – 10°
88°
13°
0° – 10°
Front-to-back ratio, copolar
total power
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
> 25 dB
> 25 dB
> 25 dB
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
UMTS
XPol
Vertical Pattern – sidelobe
0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T
suppression for first sidelobe 18 ... 18 ... 18 ... 18 dB 18 ... 18 ... 18 ... 18 dB 18 ... 18 ... 18 ... 18 dB
above main beam
1710 – 1880 MHz: +45°/ –45° Polarization
88°
160°
14.7°
10
dB
3
dB
10
3
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
88°
163°
14°
Mechanical specifications
10
10
Input
dB
dB
3
3
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
165°
13°
Max. wind velocity
10
Horizontal Pattern
dB
3
dB
10
3
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
88°
0
2 x 7-16 female
Connector position
0
4.2 kg
Frontal:
Lateral:
Rearside:
65 N (at 150 km/h)
50 N (at 150 km/h)
160 N (at 150 km/h)
200 km/h
Packing size
935 x 172 x 92 mm
Height/width/depth
662 / 155 / 69 mm
0
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
103
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2200
X
88°
2°
XPol F-Panel 1710–2200 88° 17dBi 2°T
741 987
Type No.
Frequency range
1710 – 1880 MHz
1920 – 2200 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 88°
Vertical:
6.9°
Horizontal: 88°
Vertical:
6.5°
Horizontal: 88°
Vertical:
6.2°
Electrical tilt
2°, fixed
2°, fixed
2°, fixed
Sidelobe suppression for
first sidelobe above horizon
> 16 dB
> 16 dB
> 16 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Half-power beam width
Copolar +45°/ –45°
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
> 30 dB
Impedance
50 Ω
VSWR
< 1.4
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
88°
160°
6.9°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
2° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
88°
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
162°
6.5°
10
3
0
dB
3
dB
10
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern
2° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
Input
6.2°
Max. wind velocity
3
0
Horizontal Pattern
104
3
dB
10
Bottom
Weight
163°
10
2 x 7-16 female
Connector position
Wind load
88°
dB
UMTS
XPol
1710–2200
1850 – 1990 MHz
6.5 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)
110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h
Packing size
1404 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern
2° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2200
X
88°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2200 88° 17dBi 0°–8°T
741 989
Frequency range
1710 – 1880 MHz
1710–2200
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 16.8 dBi
2 x 16.7 dBi
Horizontal: 88°
Vertical:
6.7°
Horizontal: 88°
Vertical:
6.5°
0°– 8°
0°– 8°
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
0°– 8°
88°
7°
1920 – 2200 MHz
Vertical Pattern – sidelobe
0° ... 2° ... 5° ... 8° T
0° ... 2° ... 5° ... 8° T
suppression for first sidelobe 18 ... 18 ... 16 .... 14 dB 20 ... 20 ... 18 ... 17 dB
above main beam
0° ... 2° ... 5° ... 8° T
18 ... 18 ... 18 ... 17 dB
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 24 dB
Total power: > 24 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
UMTS
XPol
Type No.
1710 – 1880 MHz: +45°/ –45° Polarization
88°
165°
7°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2200
–45°
1710 – 2200
+45°
7-16
7-16
88°
165°
6.7°
Mechanical specifications
10
3
0
Input
dB
3
dB
10
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1920 – 2200 MHz: +45°/ –45° Polarization
Adjustment
mechanism
165°
6.5°
Max. wind velocity
10
Horizontal Pattern
3
dB
3
dB
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
88°
0
2 x 7-16 female
Connector position
0
7.5 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)
110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h
Packing size
1574 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
105
Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
X
88°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XPol F-Panel 1710–2170 88° 18dBi 0°–6°T
741 990
Type No.
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17.7 dBi
2 x 18 dBi
2 x 18.2 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 88°
Vertical:
4.9°
Horizontal: 88°
Vertical:
4.7°
Horizontal: 88°
Vertical:
4.5°
Electrical tilt
continuously adjustable
0°– 6°
0°– 6°
0°– 6°
1920 – 2170 MHz
Vertical Pattern – sidelobe
0° ... 2° ... 4° ... 6° T
0° ... 2° ... 4° ... 6° T
0° ... 2° ... 4° ... 6° T
suppression for first sidelobe 17 ... 17 ... 17 ...17 dB 18 ... 18 ... 18 ...18 dB 18 ... 18 ... 18 ...18 dB
above main beam
Front-to-back ratio, copolar
total power
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between ports
> 25 dB
> 25 dB
> 25 dB
> 25 dB
> 25 dB
> 25 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
88°
165°
4.9°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2170
–45°
1710 – 2170
+45°
7-16
7-16
88°
165°
4.7°
Mechanical specifications
10
3
0
Input
dB
3
dB
10
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
165°
4.5°
10
3
Horizontal Pattern
106
3
dB
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
88°
0
2 x 7-16 female
Connector position
0
dB
UMTS
XPol
Frequency range
Max. wind velocity
9 kg
Frontal:
Lateral:
Rearside:
195 N (at 150 km/h)
160 N (at 150 km/h)
480 N (at 150 km/h)
200 km/h
Packing size
2214 x 172 x 92 mm
Height/width/depth
1942 / 155 / 69 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
0°
Tri-Sector Pipe Antenna
1710 –2170
Frequency Range
X
Dual Polarization
65°
Half-power Beam Width
Adjust. Electr. Downtilt 0°– 12°
120°
240°
1710 –2170 1710 –2170
X
X
65°
65°
0°– 12°
0°– 12°
set by hand or by optional RCUs (Remote Control Units)
XPol Tri-Sector Pipe 1710–2170 65° 15.5dBi 0°–12°T
Electrical datas
per sector
800 10375
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
+45°, –45°
+45°, –45°
+45°, –45°
0° ... 4° ... 8° … 12° T
15.4 ... 15.2 ... 15.0 ... 14.8
0° ... 4° ... 8° … 12° T
15.5 ... 15.4 ... 15.3 ... 14.9
0° ... 4° ... 8° … 12° T
15.7 ... 15.6 ... 15.4 ... 14.9
Frequency range
Gain
per Input (dBi)
Half-power beam width
Copolar +45°/ –45°
Horizontal: 67°
Vertical: 12.7°
Electrical tilt
continuously adjustable
0°– 12°
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation: Intrasystem
Isolation: Intersystem
Horizontal:
Vertical:
1920 – 2170 MHz
65°
12°
Horizontal: 62°
Vertical: 11.2°
0°– 12°
0°– 12°
0° ... 4° ... 8° … 12° T 0° ... 4° ... 8° … 12° T 0° ... 4° ... 8° … 12° T
16 ... 16 ... 15 ... 15 dB 18 ... 17 ... 17 ... 16 dB 18 ... 18 ... 16 ... 16 dB
Copolar: > 25 dB
Copolar: > 25 dB
Copolar: > 25 dB
Typically: 20 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
> 30 dB
> 40 dB
> 30 dB
> 40 dB
> 30 dB
> 40 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
250 W (at 50 °C ambient temperature)
compact
service area
Polarization
Tri-Sector
Pipe Antenna
Type No.
0°
7-16
7-16
+45°
1710 – 1880 MHz: +45°/ –45° Polarization
–45°
1710 – 2170
130°
67°
12.7°
7-16
–45°
+45°
1710 – 2170
10
3
+45°
240°
–45°
7-16
dB
3
dB
10
7-16
1710 – 2170
120°
7-16
0
0
Horizontal Pattern
Vertical Pattern
0°– 12° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
Mechanical specifications
Input
Connector position
125°
65°
12°
10
3
Weight
dB
3
dB
10
Adjustment
mechanism
Wind load
3 x 2 x 7-16 female
Bottom – inside service area
3 x 1, Position bottom
continuously adjustable
inside service area
32 kg
205 N (at 150 km/h)
0
0
Horizontal Pattern
Vertical Pattern
0°– 12° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Max. wind velocity
200 km/h
Natural frequency
45 – 47 Hz
Damping ratio
Mechanical interface
118°
62°
11.2°
10
3
Packing size
dB
3
dB
10
0
Height/ diameter
0.032
Flange connection 12 x 12M
at a graduated diameter of 208 mm
0°– 360° continuously adjustable
(for further details
see application note)
1395 x 315 x 330 mm
1241 / 230 and 280 mm
0
Horizontal Pattern
Vertical Pattern
0°– 12° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
107
0°
Tri-Sector Pipe Antenna
1710 –2170
Frequency Range
X
Dual Polarization
65°
Half-power Beam Width
Adjust. Electr. Downtilt 0°– 10°
120°
240°
1710 –2170 1710 –2170
X
X
65°
65°
0°– 10°
0°– 10°
set by hand or by optional RCUs (Remote Control Units)
XPol Tri-Sector Pipe 1710–2170 65° 18dBi 0°–10°T
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
+45°, –45°
+45°, –45°
+45°, –45°
17.2 ... 17.5 ... 17.2
0° ... 5° ... 10°
17.6 ... 17.8 ... 17.6
0° ... 5° ... 10°
17.8 ... 17.9 ... 17.4
0° ... 5° ... 10°
Horizontal: 63°
Vertical:
6.7°
Horizontal: 60°
Vertical:
6.4°
0°– 10°
0°– 10°
0°– 10°
0° ... 5° ... 10° T
17 ... 15 ... 15 dB
0° ... 5° ... 10° T
17 ... 17 ... 15 dB
0° ... 5° ... 10° T
17 ... 17 ... 15 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
> 30 dB
> 45 dB
> 30 dB
> 42 dB
> 30 dB
> 42 dB
Polarization
Average gain (dBi)
Tilt
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation: Intrasystem
Isolation: Intersystem
66°
7°
1920 – 2170 MHz
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
compact
service area
Frequency range
0°
7-16
7-16
–45°
1710 – 1880 MHz: +45°/ –45° Polarization
+45°
1710 – 2170
127°
66°
7-16
7°
+45°
–45°
1710 – 2170
10
3
–45°
240°
7-16
1710 – 2170
+45°
7-16
dB
3
dB
10
120°
7-16
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
Mechanical specifications
Input
Connector position
125°
63°
6.7°
10
3
Adjustment
mechanism
Weight
dB
3
dB
10
Wind load
3 x 2 x 7-16 female
Bottom – inside service area
3 x 1, Position bottom
continuously adjustable
inside service area
56 kg
320 N (at 150 km/h)
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Max. wind velocity
200 km/h
Natural frequency
19 – 21 Hz
Damping ratio
Mechanical interface
120°
60°
6.4°
10
3
0
Horizontal Pattern
108
3
Packing size
dB
10
dB
Tri-Sector
Pipe Antenna
Electrical datas
per sector
800 10360
Type No.
Height/ diameter
0.032
Flange connection 12 x 12M
at a graduated diameter of 208 mm
0°– 360° continuously adjustable
(for further details
see application note)
2030 x 400 x 400 mm
1823 / 230 and 280 mm
0
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
0°
Tri-Sector Pipe Antenna
1710 –2170
Frequency Range
X
Dual Polarization
65°
Half-power Beam Width
Adjust. Electr. Downtilt 0°– 10°
120°
240°
1710 –2170 1710 –2170
X
X
65°
65°
0°– 10°
0°– 10°
set by hand or by optional RCUs (Remote Control Units)
XPol Tri-Sector Pipe 1710–2170 65° 18dBi 0°–10°T
Electrical datas
per sector
800 10270
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
+45°, –45°
+45°, –45°
+45°, –45°
17.2 ... 17.5 ... 17.2
0° ... 5° ... 10°
17.6 ... 17.8 ... 17.6
0° ... 5° ... 10°
17.8 ... 17.9 ... 17.4
0° ... 5° ... 10°
Half-power beam width
Copolar +45°/ –45°
Horizontal: 66°
Vertical: 7°
Horizontal: 63°
Vertical: 6.7°
Horizontal: 60°
Vertical: 6.4°
Electrical tilt
continuously adjustable
0°– 10°
0°– 10°
0°– 10°
0° ... 5° ... 10° T
17 ... 15 ... 15 dB
0° ... 5° ... 10° T
17 ... 17 ... 15 dB
0° ... 5° ... 10° T
17 ... 17 ... 15 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
> 30 dB
> 45 dB
> 30 dB
> 42 dB
> 30 dB
> 42 dB
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation: Intrasystem
Isolation: Intersystem
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
0°
7-16
–45°
1710 – 1880 MHz: +45°/ –45° Polarization
7-16
+45°
1710 – 2170
127°
66°
7-16
7°
+45°
–45°
1710 – 2170
10
3
–45°
240°
+45°
7-16
dB
3
dB
10
7-16
1710 – 2170
120°
7-16
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
Mechanical specifications
Input
Connector position
125°
63°
6.7°
10
3
Weight
dB
3
dB
10
Adjustment
mechanism
Wind load
3 x 2 x 7-16 female
Bottom – inside service area
3 x 1, Position bottom
continuously adjustable
inside service area
70 kg
450 N (at 150 km/h)
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Max. wind velocity
200 km/h
Natural frequency
17.5 – 19 Hz
Damping ratio
Mechanical interface
120°
60°
6.4°
10
0
Horizontal Pattern
3
Packing size
dB
3
dB
10
Height/ diameter
0.032
Flange connection 12 x 12M
at a graduated diameter of 208 mm
0°– 360° continuously adjustable
(for further details
see application note)
2500 x 330 x 315 mm
2296 / 230 and 280 mm
0
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
109
Antenna
Average gain (dBi)
Tilt
1920 – 2170 MHz
Tri-Sector
Polarization
Tri-Sector
Pipe
Pipe Antenna
Frequency range
extended
service area
Type No.
0°
Tri-Sector Pipe Antenna
1710 –2170
Frequency Range
X
Dual Polarization
65°
Half-power Beam Width
Adjust. Electr. Downtilt 0°– 6°
120°
240°
1710 –2170 1710 –2170
X
X
65°
65°
0°– 6°
0°– 6°
set by hand or by optional RCUs (Remote Control Units)
XPol Tri-Sector Pipe 1710–2170 65° 19.5dBi 0°–6°T
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
+45°, –45°
+45°, –45°
+45°, –45°
18.7 ... 19.0 ... 18.7
0° ... 3° ... 6°
19.1 ... 19.3 ... 19.1
0° ... 3° ... 6°
19.3 ... 19.5 ... 19.3
0° ... 3° ... 6°
Half-power beam width
Copolar +45°/ –45°
Horizontal: 66°
Vertical:
4.7°
Horizontal: 63°
Vertical:
4.5°
Horizontal: 60°
Vertical:
4.3°
Electrical tilt
continuously adjustable
0°– 6°
0°– 6°
0°– 6°
0° ... 3° ... 6° T
17 ... 15 ... 15 dB
0° ... 3° ... 6° T
17 ... 17 ... 15 dB
0° ... 3° ... 6° T
17 ... 17 ... 15 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Typically: 25 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
Typically: 20 dB
Typically: > 10 dB
> 30 dB
> 45 dB
> 30 dB
> 42 dB
> 30 dB
> 42 dB
Polarization
Average gain (dBi)
Tilt
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio
(180° ± 30°)
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation: Intrasystem
Isolation: Intersystem
1920 – 2170 MHz
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
compact
service area
Frequency range
0°
7-16
1710 – 1880 MHz: +45°/ –45° Polarization
–45°
125°
66°
7-16
+45°
1710 – 2170
4.7°
3
Mechanical specifications
Input
63°
Connector position
4.5°
3
Weight
dB
dB
3
Adjustment
mechanism
10
10
Wind load
0
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
0
Horizontal Pattern
110
dB
445 N (at 150 km/h)
200 km/h
Damping ratio
10
3
64 kg
9.5 – 11 Hz
4.3°
3
3 x 1, Position bottom
continuously adjustable
inside service area
Natural frequency
60°
10
3 x 2 x 7-16 female
Bottom – inside service area
Max. wind velocity
Mechanical interface
115°
120°
7-16
Vertical Pattern
0°– 6° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
120°
+45°
7-16
0
7-16
1710 – 2170
–45°
240°
0
Horizontal Pattern
–45°
1710 – 2170
dB
dB
3
+45°
7-16
10
10
dB
Tri-Sector
UMTS
PipeXPol
Antenna
Electrical datas
per sector
800 10271
Type No.
Packing size
Height/ diameter
0.032
Flange connection 12 x 12M
at a graduated diameter of 208 mm
0°– 360° continuously adjustable
(for further details
see application note)
2605 x 330 x 315 mm
2472 / 230 and 280 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Additional Options
for Tri-Sector-Antennas
Accessories delivered with the Tri-Sector-Pipe Antenna:
1.
2.
3.
4.
Clamping ring for mounting the antenna on the customer-supplied base
Lightning conductor rod
Ring bolt as attachment possibility for lifting aid
Wrench (SW41 + SW27) for attaching the RCU
Optional Accessories:
1. 860 10025
2. 782 10352
3. 782 10353
4. 782 10354
5. 782 10355
6. 850 10010
7. 738 440
8. 737 306
9. 850 10111
10. 782 10xxx
Slimline Remote Control Unit (RCU), see page 169
Multipack TMA MPTMA-UMTS-12-AISG-6P with 12 dB
(equals 3*DTMA) and RET-Support
Multipack TMA MPTMA-UMTS-24-AISG-6P with 24 dB
(equals 3*DTMA) and RET-Support
Multipack TMA MPTMA-UMTS-12-CW-6P with 12 dB
(equals 3*DTMA) without RET-Support
Multipack TMA MPTMA-UMTS-24-CW-6P with 24 dB
(equals 3*DTMA) without RET-Support
Flexible Sealing Frame (Roxtec frame to seal connection
between the mast and the antenna, see below
Azimuth Adjustment Tool, see page 211
3-way power splitter for optional omni pattern
Inlay mounting plate kit for 3-way splitter and DTMA for
omni pattern
Double TMA optional for omni pattern (several types,
see page 188)
Tri-Sector
Pipe Antenna
The following components may be ordered separately
View inside service zone with MPTMA and Slimline
RCUs
Flexible Sealing Frame
Type No.
Outer diameter
Cable diameter (6x)
Cable diameter (3x)
850 10010
180 mm
15 – 42 mm
3.5 – 10.5 mm
Frame-Material
Hot-dip galvanized steel
Sealing-Material
Halogen free cross linkable compound on
ethylene-propylene rubber (EPDM)
Material of screws,
washers and nuts
Accessories
Required assembly tools
Weight
Packing size (L x W x H)
Stainless steel
Mounting lubricant
Wrench size 13 mm,
Socket wrench size 5 mm
2.7 kg
approx. 208 x 208 x 68 mm
For further information please refer to separate application
note under:
www.kathrein.de/en/mca/index-customerportal.htm
111
Tri-Sector Pipe Antennas
Mounting Hardware
TMA Service Area
Cylindrical shaped service area for installation of 3 DTMA’s
Purpose: for use with a Kathrein tri-sector pipe antenna
mounted on top of TMA service area
TMA Service Area
Type No.
Height/Diameter
Tri-Sector
UMTS
PipeXPol
Antenna
Wind load
Max. wind velocity
Dynamic stiffness
Logarithmic decrement of
structural damping
Mechanical interface
bottom and top
Required assembly tools
850 10012
1710 / 280 mm
325 N (at 150 km/h)
200 km/h
E · l = 3.6 · 10
12
Nmm2
δ = 0.03
Flange connection 12 x M12
at a graduated diameter of 208 mm
wrench size 19 mm
Natural air ventilation
Material
Cover
Material of screws
Packing size (L x W x H)
Weight netto/brutto
Hot-dip galanized steel
Aluminum, powdercoated color RAL 7035
Stainless steel
1850 x 314 x 327 mm
77.3 / 84.0 kg
For further information please refer to separate
application note under:
www.kathrein.de/en/mca/index-customerportal.htm
112
Summary – Directional Antennas
2-Multi-band
UMTS
Type
Type No.
Height
[mm]
Page
XXPol F-Panel
1710–2170
1710–2170
65°
65°
15dBi
15dBi
0°–10°T
0°–10°T
742 233
679
114
XXPol F-Panel
1710–2170
1710–2170
65°
65°
18dBi
18dBi
0°–8°T
0°–8°T
742 234
1304
115
XXPol F-Panel
1710–2180
1710–2180
65°
65°
18dBi
18dBi
0°–10°T
0°–10°T
742 236
1319
116
XXPol F-Panel
1710–2170
1710–2170
65°
65°
19.5dBi
19.5dBi
0°–6°T
0°–6°T
742 235
1959
117
XXPol F-Panel
1710–2180
1710–2180
88°
88°
16.5dBi
16.5dBi
0°–10°T
0°–10°T
742 352
1319
118
Connector position: Bottom
113
UMTS
XXPol 2-Multi
Dual Polarization + 45°/ –45° – 1800/1900/2000
2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
1710 –2170 1710 –2170
X
X
65°
65°
0°– 10°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
XXPol F-Panel 1710–2170/1710–2170 65°/65° 15/15dBi 0°–10°/0°–10°T
742 233
Type No.
Frequency range
1710 – 1880 MHz
Polarization
1920 – 2170 MHz
+45°, –45°; +45°, –45° +45°, –45°; +45°, –45° +45°, –45°; +45°, –45°
Gain
4 x 15 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
4 x 15.2 dBi
67°
14°
4 x 15.3 dBi
Horizontal: 65°
Vertical: 13.7°
0° – 10°
Horizontal:
Vertical:
0° – 10°
62°
13°
0° – 10°
Vertical Pattern – sidelobe
0° ... 4° ... 8° ... 10°T
0° ... 4° ... 8° ... 10°T
suppression for first sidelobe 16 ... 16 ... 15 .... 15 dB 16 ... 16 ... 16 ... 16 dB
above main beam
0° ... 4° ... 8° ... 10°T
16 ... 16 ... 16 ... 16 dB
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between inputs
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Typically: 20 dB
Typically: 10 dB
Typically: 20 dB
Typically: 10 dB
Typically: 20 dB
Typically: 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
250 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
130°
67°
14°
10
dB
3
dB
10
3
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
125°
1710 – 2170
+45°
1710 – 2170
–45°
1710 – 2170
+45°
1710 –2170
–45°
7-16
7-16
7-16
7-16
65°
13.7°
Input
dB
dB
3
Mechanical specifications
10
10
3
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
62°
13°
Max. wind velocity
10
3
Packing size
dB
10
3
Bottom
2 x, Position bottom
continuously adjustable
Weight
Wind load
120°
4 x 7-16 female
Connector position
0
dB
UMTS
XXPol 2-Multi
1710–2170
1850 – 1990 MHz
Height/width/depth
10.4 kg
Frontal:
Lateral:
Rearside:
300 N (at 150 km/h)
60 N (at 150 km/h)
300 N (at 150 km/h)
200 km/h
924 x 360 x 130 mm
679 / 323 / 71 mm
0
0
Horizontal Pattern
114
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
1710 –2170 1710 –2170
X
X
65°
65°
0°– 8°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XXPol F-Panel 1710–2170/1710–2170 65°/65° 18/18dBi 0°–8°/0°–8°T
742 234
Type No.
Frequency range
1710 – 1880 MHz
1920 – 2170 MHz
+45°, –45°; +45°, –45° +45°, –45°; +45°, –45° +45°, –45°; +45°, –45°
Gain
4 x 17.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
0° – 8°
66°
7°
4 x 17.7 dBi
4 x 17.8 dBi
Horizontal: 65°
Vertical:
6.7°
Horizontal: 64°
Vertical:
6.5°
0° – 8°
0° – 8°
Vertical Pattern – sidelobe
0° ... 2° ... 5° ... 8° T
0° ... 2° ... 5° ... 8° T
suppression for first sidelobe 17 ... 17 ... 15 .... 15 dB 20 ... 20 ... 18 ... 18 dB
above main beam
0° ... 2° ... 5° ... 8° T
20 ... 20 ... 18 ... 16 dB
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between inputs
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
UMTS
XXPol 2-Multi
Polarization
1710–2170
1850 – 1990 MHz
1710 – 1880 MHz: +45°/ –45° Polarization
130°
66°
7°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
125°
1710 – 2170
+45°
1710 – 2170
–45°
1710 – 2170
+45°
1710 –2170
–45°
7-16
7-16
7-16
7-16
65°
6.7°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Bottom
2 x, Position bottom
continuously adjustable
Weight
Wind load
120°
4 x 7-16 female
Connector position
0
64°
15.5 kg
Frontal:
Lateral:
Rearside:
570 N (at 150 km/h)
110 N (at 150 km/h)
570 N (at 150 km/h)
6.5°
Max. wind velocity
10
3
Packing size
dB
3
dB
10
Height/width/depth
200 km/h
1589 x 322 x 108 mm
1304 / 299 / 69 mm
0
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
115
2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
1710 –2180 1710 –2180
X
X
65°
65°
0°– 10°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
XXPol F-Panel 1710–2180/1710–2180 65°/65° 18/18dBi 0°–10°/0°–10°T
742 236
Type No.
Frequency range
1710 – 1880 MHz
Polarization
1920 – 2180 MHz
+45°, –45°; +45°, –45° +45°, –45°; +45°, –45° +45°, –45°; +45°, –45°
Gain
4 x 17.5 dBi
Half-power beam width
Copolar +45°/ –45°
Vertical Pattern – sidelobe
suppression for first sidelobe
above main beam
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
4 x 17.7 dBi
4 x 17.8 dBi
Horizontal: 64°
Vertical:
6.8°
Horizontal: 62°
Vertical:
6.5°
0° – 10°
0° – 10°
0° – 10°
0° ... 5° ... 10° T
17 ... 15 .... 15 dB
0° ... 5° ... 10° T
20 ... 18 ... 18 dB
0° ... 5° ... 10° T
20 ... 18 ... 16 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Total power: > 25 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
0°
±60°
Isolation, between inputs
65°
7°
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
130°
65°
7°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
125°
1710 – 2180
+45°
1710 – 2180
–45°
1710 – 2180
+45°
1710 –2180
–45°
7-16
7-16
7-16
7-16
64°
6.8°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 – 2180 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Bottom
2 x, Position bottom
continuously adjustable
Weight
Wind load
120°
4 x 7-16 female
Connector position
0
62°
16.5 kg
Frontal:
Lateral:
Rearside:
600 N (at 150 km/h)
120 N (at 150 km/h)
600 N (at 150 km/h)
6.5°
Max. wind velocity
10
3
3
Packing size
dB
10
dB
UMTS
XXPol 2-Multi
1710–2180
1850 – 1990 MHz
Height/width/depth
200 km/h
1574 x 360 x 130 mm
1319 / 323 / 71 mm
0
0
Horizontal Pattern
116
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
1710 –2170 1710 –2170
X
X
65°
65°
0°– 6°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XXPol F-Panel 1710–2170/1710–2170 65°/65° 19.5/19.5dBi 0°–6°/0°–6°T
742 235
Type No.
Frequency range
1710 – 1880 MHz
1920 – 2170 MHz
+45°, –45°; +45°, –45° +45°, –45°; +45°, –45° +45°, –45°; +45°, –45°
Gain
4 x 19 dBi
4 x 19.2 dBi
4 x 19.5 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 65°
Vertical:
4.6°
Horizontal: 64°
Vertical:
4.4°
Horizontal: 63°
Vertical:
4.2°
Electrical tilt
continuously adjustable
0° – 6°
0° – 6°
0° – 6°
Vertical Pattern – sidelobe
0° ... 2° ... 4° ... 6° T
0° ... 2° ... 4° ... 6° T
suppression for first sidelobe 17 ... 17 ... 14 .... 14 dB 17 ... 17 ... 15 ... 15 dB
above main beam
0° ... 2° ... 4° ... 6° T
17 ... 17 ... 15 ... 15 dB
Front-to-back ratio
Cross polar ratio
Maindirection
Sector
0°
±60°
Isolation, between inputs
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 25 dB
Copolar:
> 30 dB
Total power: > 24 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
UMTS
XXPol 2-Multi
Polarization
1710–2170
1850 – 1990 MHz
1710 – 1880 MHz: +45°/ –45° Polarization
130°
65°
4.6°
dB
3
3
dB
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
127°
1710 – 2170
+45°
1710 – 2170
–45°
1710 – 2170
+45°
1710 –2170
–45°
7-16
7-16
7-16
7-16
64°
4.4°
3
Input
dB
dB
3
Mechanical specifications
10
10
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1920 – 2170 MHz: +45°/ –45° Polarization
Adjustment
mechanism
63°
4.2°
10
3
Max. wind velocity
Packing size
dB
3
dB
10
Bottom
2 x, Position bottom
continuously adjustable
Weight
Wind load
124°
4 x 7-16 female
Connector position
0
Height/width/depth
18 kg
Frontal:
Lateral:
Rearside:
920 N (at 150 km/h)
190 N (at 150 km/h)
920 N (at 150 km/h)
200 km/h
2384 x 360 x 130 mm
1959 / 323 / 71 mm
0
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
117
2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
1710 –2180 1710 –2180
X
X
88°
88°
0°– 10°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
XXPol F-Panel 1710–2180/1710–2180 88°/88° 16.5/16.5dBi 0°–10°/0°–10°T
742 352
Type No.
Frequency range
1710 – 1880 MHz
1710–2180
1850 – 1990 MHz
1920 – 2180 MHz
Polarization
+45°, –45°; +45°, –45° +45°, –45°; +45°, –45° +45°, –45°; +45°, –45°
Gain (average)
Tilt
16.1 ... 16.3 ... 16.0 dBi 16.2 ... 16.4 ... 16.1 dBi 16.5 ... 16.7 ... 16.2 dBi
0° ... 5° ... 10°
0° ... 5° ... 10°
0° ... 5° ... 10°
Half-power beam width
Copolar +45°/ –45°
Horizontal: 88°
Vertical:
7.4°
Electrical tilt
continuously adjustable
0° – 10°
Horizontal:
Vertical:
90°
7°
Horizontal: 88°
Vertical:
6.5°
0° – 10°
0° – 10°
Vertical Pattern – sidelobe
0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T 0° ... 4° ... 8° ... 10° T
suppression for first sidelobe 18 ... 17 ... 16 ... 15 dB 18 ... 17 ... 16 ... 15 dB 17 ... 17 ... 16 ... 15 dB
above main beam
Copolar:
> 24 dB
Total power: > 24 dB
Copolar:
> 24 dB
Total power: > 24 dB
Copolar:
> 24 dB
Total power: > 24 dB
Typically: 15 dB
> 8 dB
Typically: 15 dB
> 7.5 dB
Typically: 15 dB
> 7 dB
Isolation: Intrasystem
> 30 dB
> 30 dB
> 30 dB
Isolation: Intersystem
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Cross polar ratio
Maindirection
Sector
0°
±60°
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz: +45°/ –45° Polarization
88°
155°
7.4°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0° – 10° electrical downtilt
1850 – 1990 MHz: +45°/ –45° Polarization
1710 – 2180
+45°
1710 – 2180
–45°
1710 – 2180
+45°
1710 –2180
–45°
7-16
7-16
7-16
7-16
90°
155°
7°
Mechanical specifications
10
3
0
Input
dB
3
dB
10
Horizontal Pattern
Vertical Pattern
0° – 10° electrical downtilt
1920 – 2180 MHz: +45°/ –45° Polarization
Adjustment
mechanism
Wind load
88°
6.5°
Horizontal Pattern
118
3
dB
10
3
Max. wind velocity
Packing size
10
Bottom
2 x, Position bottom
continuously adjustable
Weight
155°
0
4 x 7-16 female
Connector position
0
dB
UMTS
XXPol 2-Multi
Front-to-back ratio
Height/width/depth
16.5 kg
Frontal:
Lateral:
Rearside:
600 N (at 150 km/h)
120 N (at 150 km/h)
600 N (at 150 km/h)
200 km/h
1574 x 360 x 130 mm
1319 / 323 / 71 mm
0
Vertical Pattern
0° – 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Summary – Directional Antennas
Dual-band
UMTS
Type
XXPol A-Panel
806– 960
1710–2170
XXPol A-Panel
806– 960
1710–2170
XXPol A-Panel
824– 960
1710–2180
XXPol A-Panel
824–960
1710–2180
XXPol A-Panel
824– 960
1710–2180
XXPol A-Panel
824– 960
1710–2180
XXPol A-Panel
824– 960
1710–2180
XXPol A-Panel
824– 960
1710–2180
XXPol A-Panel
Type No.
Height
[mm]
Page
65°
60°
12dBi
14dBi
742 226
579
120
65°
60°
12dBi
14dBi
742 222
579
121
65°
65°
14dBi
17dBi
0°–14°T
0°–8°T
742 264
1316
122
65°
65°
14dBi
17dBi
0°–14°T
0°–8°T
742 223
1316
123
65°
65°
16dBi
18.5dBi
0°–10°T
0°–6°T
742 265
1916
124
65°
65°
16dBi
18.5dBi
0°–10°T
0°–6°T
742 224
1916
125
65°
65°
17dBi
18.5dBi
0°–7°T
0°–6°T
742 266
2516
126
65°
65°
17dBi
18.5dBi
0°–7°T
0°–6°T
742 225
2516
127
806–960
1710–2180
88°
88°
13.5dBi
16.5dBi
0°–12°T 800 10121
0°–10°T
1384
128
XXPol A-Panel
806–960
1710–2180
88°
88°
15.2dBi
18dBi
0°–10°T 800 10122
0°–6°T
1917
129
XXPol A-Panel
806–960
1710–2180
88°
88°
16.5dBi
18dBi
0°–7°T 800 10123
0°–6°T
2635
130
Connector position: Bottom
C
C
C
C
New Products
119
UMTS
XXPol Dual-b.
Dual Polarization + 45°/ –45° – 800/900 1800/1900/2000
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electr. Downtilt
806 – 960
1710 –2170
X
X
65°
60°
0°
0°
XXPol A-Panel 806–960/1710–2170 65°/ 60° 12/14dBi 0°/0°T
742 226
Type No.
Frequency range
806 – 866 MHz
806 –960
824 – 894 MHz
+45°, –45°
+45°, –45°
Polarization
Gain
Half-power beam width
Copolar +45°/ –45°
1710–2170
880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2170 MHz
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
2 x 11.1 dBi
2 x 11.4 dBi
2 x 11.8 dBi
2 x 12.8 dBi
2 x 13.3 dBi
2 x 13.6 dBi
Horizontal: 67°
Vertical:
34°
Horizontal: 66°
Vertical:
33°
Horizontal: 64°
Vertical:
30°
Horizontal: 66°
Vertical:
20°
Horizontal: 60°
Vertical:
18°
Horizontal: 60°
Vertical: 17.5°
Front-to-back ratio [dB] Copolar:
> 23 Copolar:
> 23 Copolar:
> 25 Copolar:
> 25 Copolar:
> 25 Copolar:
> 25
(180° ±30°)
[dB] Total power: > 20 Total power: > 20 Total power: > 22 Total power: > 22 Total power: > 22 Total power: > 22
Cross polar ratio
Maindirection
0°
Sector
±60°
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 16 dB
> 10 dB
Typically: 18 dB
> 10 dB
Typically: 20 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
Isolation: Intrasystem
> 45 dB (806 – 960 // 1710 – 2170 MHz)
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
< –150 dBc
Max. power per input
250 W (at 50 °C ambient temperature)
200 W (at 50 °C ambient temperature)
1710–2170
–45°
806 – 960
–45°
806 – 960
+45°
1710 – 2170
+45°
7-16
7-16
7-16
7-16
806 – 960 +45°/ –45° Polarization
125°
65°
33°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern
Input
Connector position*
1710 –2170 +45°/ –45° Polarization
120°
Weight
Wind load (at 150 km/h)
60°
4 x 7-16 female
Bottom or top
7.5 kg
Frontal / Lateral / Rearside:
100 N / 80 N / 180 N
18°
Max. wind velocity
3
0
Horizontal Pattern
120
3
dB
10
10
dB
UMTS
XXPol Dual-b.
Isolation: Intersystem
0
Vertical Pattern
200 km/h
Packing size
736 x 302 x 192 mm
Height/width/depth
579 / 262 / 139 mm
* Inverted mounting:
Connector position top: Change 3 drain hole screws.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electr. Downtilt
Integrated Combiner
806 – 960
1710 –2170
X
X
65°
60°
0°
0°
C
XXPol A-Panel 806–960/1710–2170 C 65°/ 60° 12/14dBi 0°/0°T
742 222
Type No.
Frequency range
806 – 866 MHz
806 –960
824 – 894 MHz
1710–2170
880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 11.1 dBi
2 x 11.4 dBi
2 x 11.8 dBi
2 x 12.5 dBi
2 x 13.3 dBi
2 x 13.6 dBi
Horizontal: 67°
Vertical:
34°
Horizontal: 66°
Vertical:
33°
Horizontal: 64°
Vertical:
30°
Horizontal: 66°
Vertical:
20°
Horizontal: 60°
Vertical:
18°
Horizontal: 60°
Vertical: 17.5°
Half-power beam width
Copolar +45°/ –45°
Front-to-back ratio [dB] Copolar:
> 23 Copolar:
> 23 Copolar:
> 25 Copolar:
> 25 Copolar:
> 25 Copolar:
> 25
(180° ± 30°)
[dB] Total power: > 20 Total power: > 20 Total power: > 22 Total power: > 22 Total power: > 22 Total power: > 22
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 25 dB
> 10 dB
Typically: 18 dB
> 10 dB
Typically: 18 dB
> 10 dB
Typically: 20 dB
> 10 dB
Isolation: Intrasystem
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
Intermodulation IM3
Max. power
< –150 dBc (2 x 43 dBm carrier)
< –150 dBc (2 x 43 dBm carrier)
250 W (at 50 °C ambient temperature)
200 W (at 50 °C ambient temperature)
Max. power
per combined input
450 W (at 50 °C ambient temperature)
Integrated combiner
The insertion loss is included in the given antenna gain values.
806 – 960
–45°
1710–2170
–45°
806 – 960
+45°
UMTS
XXPol Dual-b.
Cross polar ratio
Maindirection
0°
Sector
±60°
1710 – 2170
+45°
C
C
7-16
7-16
806 – 960 +45°/ –45° Polarization
125°
65°
33°
dB
3
3
dB
10
10
Mechanical specifications
0
0
Horizontal Pattern
Vertical Pattern
Input
Connector position*
1710 –2170 +45°/ –45° Polarization
120°
Weight
Wind load (at 150 km/h)
60°
2 x 7-16 female
Bottom or top
7.2 kg
Frontal / Lateral / Rearside:
100 N / 80 N / 180 N
18°
Max. wind velocity
dB
3
0
Horizontal Pattern
3
dB
10
10
0
Vertical Pattern
200 km/h
Packing size
736 x 302 x 192 mm
Height/width/depth
579 / 262 / 139 mm
* Inverted mounting:
Connector position top: Change 3 drain hole screws.
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
121
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
824 – 960
1710 –2180
X
X
65°
65°
0°– 14°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 824–960/1710–2180 65°/ 65° 14/17dBi 0°–14°/0°–8°T
742 264
Type No.
Frequency range
824–960
824 – 894 MHz
870 – 960 MHz
1710–2180
1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2180 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14 dBi
2 x 14 dBi
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal Pattern:
Half-power beam width
68°
65°
65°
65°
63°
Front-to-back ratio, copolar
> 26 dB
> 26 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
20 dB
> 10 dB
Typically:
20 dB
> 10 dB
Typically:
16 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10 dB
0°
±60°
Half-power beam width
16°
14.5°
7.8°
7.3°
6.8°
Electrical tilt
continuously adjustable
0°– 14°
0°– 14°
0°– 8°
0°– 8°
0°– 8°
Sidelobe suppression for first 0° ... 7° ... 14° T 0° ... 7° ... 14° T 0° ... 4° ... 8° T 0° ... 4° ... 8° T 0° ... 4° ... 8° T
sidelobe above main beam 14 ... 14 ... 13 dB 14 ... 14 ... 13 dB 14 ... 14 ... 14 dB 16 ... 16 ... 15 dB 15 ... 16 ... 15 dB
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Isolation: Intrasystem
> 30 dB
Isolation: Intersystem
> 50 dB (824 – 960 // 1710 – 2180 MHz)
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
Total power
< –150 dBc (2 x 43 dBm carrier)
500 W
1000 W
(at 50 °C ambient temperature)
250 W
500 W
824 – 960 +45°/ –45° Polarization
125°
65°
14.5°
824 – 960
–45°
824 – 960
+45°
1710 –2180
+45°
3
7-16
7-16
7-16
7-16
dB
dB
3
1710 – 2180
–45°
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
Mechanical specifications
Input
Adjustment
mechanism
120°
65°
10
0
Horizontal Pattern
122
3
Wind load
Max. wind velocity
dB
3
Bottom
2 x, Position bottom
continuously adjustable
Weight
7°
10
4 x 7-16 female (long neck)
Connector position
1710 –2180 +45°/ –45° Polarization
dB
UMTS
XXPol Dual-b.
Vertical Pattern:
0
16.5 kg
Frontal:
Lateral:
Rearside:
230 N (at 150 km/h)
180 N (at 150 km/h)
430 N (at 150 km/h)
200 km/h
Packing size
1615 x 302 x 192 mm
Height/width/depth
1316 / 262 / 139 mm
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Integrated Combiner
824 – 960
1710 –2180
X
X
65°
65°
0°– 14°
0°– 8°
C
Downtilt set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 824–960/1710–2180 C 65°/ 65° 14/17dBi 0°–14°/0°–8°T
742 223
Type No.
Frequency range
824–960
824 – 894 MHz
870 – 960 MHz
Polarization
+45°, –45°
Gain
Half-power beam width
Copolar +45°/ –45°
Electrical tilt continuously adjust.
1710–2180
1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2180 MHz
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
2 x 14 dBi
2 x 14 dBi
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
Horizontal: 68°
Vertical:
16°
Horizontal: 65°
Vertical: 14.5°
Horizontal: 65°
Vertical:
7.8°
Horizontal: 65°
Vertical:
7.3°
Horizontal: 63°
Vertical:
6.8°
0°– 14°
0°– 14°
0°– 8°
0°– 8°
0°– 8°
Front-to-back ratio, copolar
> 26 dB
> 26 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
20 dB
> 10 dB
Typically:
20 dB
> 10 dB
Typically:
16 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10 dB
0°
±60°
Isolation: Intrasystem
UMTS
XXPol Dual-b.
Vertical Pattern – sidelobe
0° ... 7° ... 14°T 0° ... 7° ... 14°T
0° ... 4° ... 8°T
0° ... 4° ... 8°T
0° ... 4° ... 8°T
suppression for first sidelobe 14 ... 14 ... 13 dB 14 ... 14 ... 13 dB 14 ... 14 ... 14 dB 16 ... 16 ... 15 dB 15 ... 16 ... 15 dB
above main beam
> 30 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power
250 W
(at 50 °C ambient temperature)
Max. power per combined input
Integrated combiner
200 W
450 W (at 50 °C ambient temperature)
The insertion loss is included in the given antenna gain values.
824 – 960 +45°/ –45° Polarization
125°
65°
14.5°
3
1710 –2180
+45°
C
7-16
7-16
dB
dB
3
824 – 960
+45°
C
10
10
824 – 960
–45°
1710 – 2180
–45°
0
0
Horizontal Pattern
Vertical Pattern
0°– 14° electrical downtilt
Mechanical specifications
Input
1710 –2180 +45°/ –45° Polarization
Adjustment
mechanism
120°
65°
10
0
Horizontal Pattern
3
Wind load
Max. wind velocity
dB
dB
3
Bottom
2 x, Position bottom
continuously adjustable
Weight
7.3°
10
2 x 7-16 female
Connector position
0
16.5 kg
Frontal:
Lateral:
Rearside:
230 N (at 150 km/h)
180 N (at 150 km/h)
430 N (at 150 km/h)
200 km/h
Packing size
1626 x 302 x 192 mm
Height/width/depth
1316 / 262 / 139 mm
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
123
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
824 – 960
1710 –2180
X
X
65°
65°
0°–10°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 824–960/1710–2180 65°/ 65° 16/18.5dBi 0°–10°/0°–6°T
742 265
Type No.
Frequency range
824–960
824 – 894 MHz
880 – 960 MHz
1710–2180
1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2180 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 15.5 dBi
2 x 16 dBi
2 x 17.8 dBi
2 x 18.2 dBi
2 x 18.3 dBi
Horizontal Pattern:
Half-power beam width
68°
65°
66°
65°
63°
Front-to-back ratio, copolar
> 27 dB
> 25 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
20 dB
> 10 dB
Typically:
20 dB
> 10 dB
Typically:
16 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
18 dB
> 10 dB
0°
±60°
Half-power beam width
10.5°
10°
5.2°
5.0°
4.7°
Electrical tilt
continuously adjustable
0.5°–9.5°
0.5°–9.5°
0°– 6°
0°– 6°
0°– 6°
Sidelobe suppression for first 0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T
sidelobe above main beam 16 ... 16 ... 17 dB 18 ... 18 ... 18 dB 14 ... 13 ... 13 dB 18 ... 17 ... 14 dB 18 ... 17 ... 14 dB
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Isolation: Intrasystem
> 30 dB
Isolation: Intersystem
> 50 dB (824 – 960 // 1710 – 2180 MHz)
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
Total power
< –150 dBc (2 x 43 dBm carrier)
500 W
1000 W
(at 50 °C ambient temperature)
250 W
500 W
824 – 960 +45°/ –45° Polarization
125°
65°
10°
824 – 960
–45°
824 – 960
+45°
1710 –2180
+45°
3
7-16
7-16
7-16
7-16
dB
dB
3
1710 – 2180
–45°
10
10
0
0
Horizontal Pattern
Vertical Pattern
0.5°–9.5° electrical downtilt
Mechanical specifications
Input
Adjustment
mechanism
120°
65°
5°
10
0
Horizontal Pattern
124
3
Max. wind velocity
dB
3
Bottom
2x, Position bottom
continuously adjustable
Weight
Wind load
10
4 x 7-16 female (long neck)
Connector position
1710 –2180 +45°/ –45° Polarization
dB
UMTS
XXPol Dual-b.
Vertical Pattern:
0
23 kg
Frontal:
Lateral:
Rearside:
340 N (at 150 km/h)
280 N (at 150 km/h)
640 N (at 150 km/h)
200 km/h
Packing size
2215 x 302 x 192 mm
Height/width/depth
1916 / 262 / 139 mm
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Integrated Combiner
824 – 960
1710 –2180
X
X
65°
65°
0°– 10°
0°– 6°
C
Downtilt set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 824–960/1710–2180 C 65°/ 65° 16/18.5dBi 0°–10°/0°–6°T
742 224
Type No.
Frequency range
824–960
1710–2180
824 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
1710 – 1880 MHz 1850 – 1990 MHz 1900 – 2180 MHz
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 15.5 dBi
2 x 16 dBi
2 x 17.8 dBi
2 x 18.2 dBi
2 x 18.3 dBi
Horizontal Pattern:
Half-power beam width
68°
65°
66°
65°
63°
Front-to-back ratio, copolar
> 27 dB
> 25 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
20 dB
> 10 dB
Typically:
20 dB
> 10 dB
Typically:
16 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10 dB
10.5°
10°
5.2°
5.0°
4.7°
0°
±60°
Vertical Pattern:
Half-power beam width
Electrical tilt continuously adjust.
0.5°– 9.5°
0°– 6°
Impedance
50 Ω
VSWR
< 1.5
Isolation: Intrasystem
UMTS
XXPol Dual-b.
Sidelobe suppression for first 0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T
sidelobe above main beam 16 ... 16 ... 17 dB 18 ... 18 ... 18 dB 15 ... 15 ... 15 dB 15 ... 15 ... 15 dB 16 ... 16 ... 15 dB
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power
250 W
200 W
(at 50 °C ambient temperature)
Max. power per combined input
Integrated combiner
450 W (at 50 °C ambient temperature)
The insertion loss is included in the given antenna gain values.
824 – 960 +45°/ –45° Polarization
125°
65°
10°
1710 –2180
+45°
C
C
7-16
7-16
dB
dB
3
0
Mechanical specifications
0
Horizontal Pattern
Vertical Pattern
0.5°–9.5° electrical downtilt
120°
Input
Adjustment
mechanism
5°
Max. wind velocity
dB
Horizontal Pattern
3
dB
10
0
Bottom
2x, Position bottom
continuously adjustable
Weight
65°
Wind load
10
2 x 7-16 female
Connector position
1710 –2180 +45°/ –45° Polarization
3
824 – 960
+45°
10
10
3
824 – 960
–45°
1710 – 2180
–45°
23 kg
Frontal:
Lateral:
Rearside:
340 N (at 150 km/h)
280 N (at 150 km/h)
640 N (at 150 km/h)
200 km/h
Packing size
2227 x 302 x 192 mm
Height/width/depth
1916 / 262 / 139 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
125
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
824 – 960
1710 –2180
X
X
65°
65°
0°–7°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 824–960/1710–2180 65°/ 65° 17/18.5dBi 0°–7°/0°–6°T
742 266
Type No.
Frequency range
824–960
824 – 894 MHz
880 – 960 MHz
1710–2180
1710 – 1880 MHz 1850 – 1990 MHz 1900 – 2180 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
2 x 17.8 dBi
2 x 18.2 dBi
2 x 18.5 dBi
Horizontal Pattern:
Half-power beam width
68°
65°
66°
65°
63°
Front-to-back ratio, copolar
> 28 dB
> 28 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
20 dB
> 10 dB
Typically:
20 dB
> 10 dB
Typically:
16 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10 dB
0°
±60°
Half-power beam width
8.1°
7.5°
5.2°
5.0°
4.7°
Electrical tilt
continuously adjustable
0.5°–7°
0.5°–7°
0°– 6°
0°– 6°
0°– 6°
Sidelobe suppression for first 0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T
sidelobe above main beam 16 ... 16 ... 14 dB 16 ... 16 ... 14 dB 13 ... 13 ... 13 dB 16 ... 15 ... 14 dB 15 ... 15 ... 15 dB
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Isolation: Intrasystem
> 30 dB
Isolation: Intersystem
> 50 dB (824–960 // 1710–2180 MHz)
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power per input
Total power
< –150 dBc(2 x 43 dBm carrier)
500 W
1000 W
(at 50 °C ambient temperature)
250 W
500 W
824 – 960 +45°/ –45° Polarization
125°
65°
7.5°
824 – 960
–45°
824 – 960
+45°
1710 –2180
+45°
3
7-16
7-16
7-16
7-16
dB
dB
3
1710 – 2180
–45°
10
10
0
0
Horizontal Pattern
Vertical Pattern
0.5°–7° electrical downtilt
Mechanical specifications
Input
Adjustment
mechanism
120°
65°
10
0
Horizontal Pattern
126
3
Wind load
Max. wind velocity
dB
3
Bottom
2x, Position bottom
continuously adjustable
Weight
5°
10
4 x 7-16 female (long neck)
Connector position
1710 –2180 +45°/ –45° Polarization
dB
UMTS
XXPol Dual-b.
Vertical Pattern:
0
26 kg
Frontal:
Lateral:
Rearside:
460 N (at 150 km/h)
380 N (at 150 km/h)
860 N (at 150 km/h)
200 km/h
Packing size
2815 x 302 x 192 mm
Height/width/depth
2516 / 262 / 139 mm
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Integrated Combiner
824 – 960
1710 –2180
X
X
65°
65°
0°– 7°
0°– 6°
C
Downtilt set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 824–960/1710–2180 C 65°/ 65° 17/18.5dBi 0°–7°/0°–6°T
742 225
Type No.
Frequency range
824–960
1710–2180
824 – 894 MHz
880 – 960 MHz
Polarization
+45°, –45°
+45°, –45°
1710 – 1880 MHz 1850 – 1990 MHz 1900 – 2180 MHz
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16.5 dBi
2 x 17 dBi
2 x 17.8 dBi
2 x 18.2 dBi
2 x 18.5 dBi
Horizontal Pattern:
Half-power beam width
68°
65°
66°
65°
63°
Front-to-back ratio, copolar
> 28 dB
> 28 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
20 dB
> 10 dB
Typically:
20 dB
> 10 dB
Typically:
16 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10 dB
7.5°
5.2°
5.0°
4.7°
0°
±60°
Vertical Pattern:
Half-power beam width
8.1°
Electrical tilt continuously adjust.
0.5°–7°
0°– 6°
Impedance
50 Ω
VSWR
< 1.5
Isolation: Intrasystem
UMTS
XXPol Dual-b.
Sidelobe suppression for first 0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T
sidelobe above main beam 16 ... 16 ... 14 dB 16 ... 16 ... 14 dB 15 ... 16 ... 16 dB 16 ... 16 ... 15 dB 16 ... 16 ... 15 dB
> 30 dB
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power
250 W
200 W
(at 50 °C ambient temperature)
Max. power per combined input
Integrated combiner
450 W (at 50 °C ambient temperature)
The insertion loss is included in the given antenna gain values.
824 – 960 +45°/ –45° Polarization
125°
65°
7.5°
3
dB
dB
3
0
Vertical Pattern
0.5°–7° electrical downtilt
C
7-16
7-16
Input
Adjustment
mechanism
5°
Max. wind velocity
0
Horizontal Pattern
3
dB
10
dB
3
Bottom
2x, Position bottom
continuously adjustable
Weight
65°
Wind load
10
2 x 7-16 female
Connector position
1710 –2180 +45°/ –45° Polarization
120°
1710 –2180
+45°
Mechanical specifications
0
Horizontal Pattern
824 – 960
+45°
C
10
10
824 – 960
–45°
1710 – 2180
–45°
26 kg
Frontal:
Lateral:
Rearside:
460 N (at 150 km/h)
380 N (at 150 km/h)
860 N (at 150 km/h)
200 km/h
Packing size
2826 x 302 x 192 mm
Height/width/depth
2516 / 262 / 139 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
127
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806 – 960
1710 –2180
X
X
88°
88°
0°– 12°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 806–960/1710–2180 88°/ 88° 13.5/16.5dBi 0°–12°/0°–10°T
800 10121
Type No.
Frequency range
Polarization
806 – 866 MHz
806–960
824 – 896 MHz
+45°, –45°
+45°, –45°
1710–2180
880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2180 MHz
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
13.4 ... 13.4 ... 13.1 13.6 ... 13.6 ... 13.4 13.9 ... 13.8 ... 13.5 16.4 ... 16.4 ... 16.2 16.4 ... 16.5 ... 16 16.4 ... 15.9 ... 15.3
0° ... 6° ... 12°
0° ... 6° ... 12°
0° ... 6° ... 12°
0° ... 5° ... 10°
0° ... 5° ... 10°
0° ... 5° ... 10°
Average gain (dBi)
Tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
±60°
88°
86°
88°
82°
85°
90°
> 23 dB
> 23 dB
> 23 dB
> 23 dB
> 23 dB
> 23 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
Typically:
20 dB
> 13 dB
avg. 19 dB
Typically:
17 dB
> 10 dB
avg. 17 dB
Typically:
16 dB
> 12 dB
avg. 19 dB
Typically:
15 dB
> 10 dB
avg. 19 dB
Half-power beam width
15.0°
14.5°
13.5°
7.1°
6.8°
6.5°
Electrical tilt
continuously adjustable
0.5°– 12.5°
0.5°– 12.5°
0.5°– 12.5°
0.5°– 10°
0.5°– 10°
0.5°– 10°
Min. sidelobe suppression for
0° ... 6° ... 12° T 0° ... 6° ... 12° T 0° ... 6° ... 12° T 0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 5° ... 10° T
first sidelobe above main beam: 16 ... 16 ... 16 dB 16 ... 16 ... 16 dB 14 ... 14 ... 13 dB 17 ... 17 ... 16 dB 17 ... 18 ... 16 dB 18 ... 16 ... 16 dB
average:
17 ... 17 ... 19 dB 17 ... 17 ... 19 dB 17 ... 16 ... 16 dB 20 ... 20 ... 18 dB 21 ... 22 ... 17 dB 20 ... 20 ... 16 dB
Impedance
50 Ω
VSWR
< 1.5
Isolation: Intrasystem
> 30 dB
Isolation: Intersystem
> 45 dB (806–960 // 1710–2180 MHz)
Intermodulation IM3
Max. power per input
Total power
< –150 dBc (2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
1000 W (at 50 °C ambient temperature)
806 – 960 +45°/ –45° Polarization
88°
250 W (at 50 °C ambient temperature)
500 W (at 50 °C ambient temperature)
806 – 960
–45°
806 – 960
+45°
1710 – 2180
–45°
1710 – 2180
+45°
7-16
7-16
7-16
7-16
165°
14°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0.5°– 12° electr. downtilt
1710 –2180 +45°/ –45° Polarization
Mechanical specifications
Input
165°
7°
Wind load
10
3
0
Horizontal Pattern
128
dB
3
Vertical Pattern
0.5°– 10° electr. downtilt
Bottom
2 x, Position bottom
continuously adjustable
Weight
10
0
4 x 7-16 female (long neck)
Connector position
Adjustment
mechanism
88°
dB
UMTS
XXPol Dual-b.
Vertical Pattern:
Max. wind velocity
21 kg
Frontal:
Lateral:
Rearside:
260 N (at 150 km/h)
210 N (at 150 km/h)
580 N (at 150 km/h)
200 km/h
Packing size
1716 x 304 x 204 mm
Height/width/depth
1384 / 262 / 149 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806 – 960
1710 –2180
X
X
88°
88°
0°– 10°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 806–960/1710–2180 88°/ 88° 15.2/18dBi 0°–10°/0°–6°T
800 10122
Type No.
Frequency range
Polarization
806 – 866 MHz
806–960
824 – 896 MHz
+45°, –45°
+45°, –45°
1710–2180
880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2180 MHz
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
14.7 ... 14.9 ... 14.7 15.0 ... 15.2 ... 15.0 15.0 ... 15.2 ... 15.0 17.7 ... 17.8 ... 17.7 17.7 ... 18.0 ... 17.6 17.6 ... 17.8 ... 17.4
0° ... 5° ... 10°
0° ... 5° ... 10°
0° ... 5° ... 10°
0° ... 3° ... 6°
0° ... 3° ... 6°
0° ... 3° ... 6°
Average gain (dBi)
Tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
±60°
88°
86°
88°
82°
85°
90°
> 23 dB
> 23 dB
> 23 dB
> 23 dB
> 23 dB
> 23 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
Typically:
20 dB
> 13 dB
avg. 19 dB
Typically:
17 dB
> 10 dB
avg. 17 dB
Typically:
16 dB
> 12 dB
avg. 19 dB
Typically:
15 dB
> 10 dB
avg. 19 dB
10°
9°
5.5°
5.2°
5°
Vertical Pattern:
10.5°
Electrical tilt
continuously adjustable
0°– 10°
0°– 6°
Min. sidelobe suppression for
0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T
first sidelobe above main beam 16 ... 16 ... 14 dB 16 ... 16 ... 16 dB 16 ... 16 ... 14 dB 18 ... 18 ... 16 dB 18 ... 18 ... 16 dB 18 ... 18 ... 16 dB
Impedance
50 Ω
VSWR
< 1.5
Isolation: Intrasystem
> 30 dB
Isolation: Intersystem
> 45 dB (806–960 // 1710–2180 MHz)
Intermodulation IM3
Max. power per input
Total power
< –150 dBc (2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
1000 W (at 50 °C ambient temperature)
806 – 960 +45°/ –45° Polarization
88°
250 W (at 50 °C ambient temperature)
500 W (at 50 °C ambient temperature)
806 – 960
–45°
806 – 960
+45°
1710 – 2180
–45°
1710 – 2180
+45°
7-16
7-16
7-16
7-16
165°
9°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 10° electr. downtilt
1710 –2180 +45°/ –45° Polarization
Mechanical specifications
Input
Connector position
Adjustment
mechanism
88°
165°
5°
Wind load
10
Horizontal Pattern
3
dB
dB
3
0
Vertical Pattern
0°– 6° electr. downtilt
Bottom
2 x, Position bottom
continuously adjustable
Weight
10
0
4 x 7-16 female (long neck)
Max. wind velocity
27 kg
Frontal:
Lateral:
Rearside:
340 N (at 150 km/h)
280 N (at 150 km/h)
640 N (at 150 km/h)
200 km/h
Packing size
2249 x 304 x 204 mm
Height/width/depth
1917 / 262 / 149 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
129
UMTS
XXPol Dual-b.
Half-power beam width
Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806 – 960
1710 –2180
X
X
88°
88°
0°– 7°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XXPol A-Panel 806–960/1710–2180 88°/ 88° 16.5/18dBi 0°–7°/0°–6°T
800 10123
Type No.
Frequency range
Polarization
Average gain (dBi)
Tilt
806 – 866 MHz
806–960
824 – 896 MHz
+45°, –45°
+45°, –45°
1710–2180
880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2180 MHz
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
16.1 ... 16.2 ... 16.1 16.3 ... 16.4 ... 16.3 16.5 ... 16.6 ... 16.5 17.8 ... 17.7 ... 17.4 18.0 ... 17.9 ... 17.4 17.9 ... 17.8 ... 17.3
0° ... 4° ... 7°
0° ... 4° ... 7°
0° ... 4° ... 7°
0° ... 3° ... 6°
0° ... 3° ... 6°
0° ... 3° ... 6°
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector
0°
±60°
±60°
86°
86°
86°
84°
85°
88°
> 25 dB
> 25 dB
> 25 dB
> 23 dB
> 23 dB
> 23 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
Typically:
20 dB
> 13 dB
avg. 19 dB
Typically:
16 dB
> 10 dB
avg. 16 dB
Typically:
16 dB
> 12 dB
avg. 17 dB
Typically:
15 dB
> 10 dB
avg. 18 dB
7.2°
6.9°
4.8°
4.5°
4.2°
Vertical Pattern:
Half-power beam width
7.3°
0.5°– 7°
0°– 6°
Min. sidelobe suppression for
0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T 0° ... 3° ... 6° T
first sidelobe above main beam 15 ... 14 ... 14 dB 15 ... 14 ... 14 dB 15 ... 14 ... 15 dB 18 ... 17 ... 16 dB 18 ... 17 ... 17 dB 18 ... 16 ... 17 dB
Impedance
50 Ω
VSWR
< 1.5
Isolation: Intrasystem
> 30 dB
Isolation: Intersystem
> 45 dB (806–960 // 1710–2180 MHz)
Intermodulation IM3
Max. power per input
Total power
< –150 dBc (2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
1000 W (at 50 °C ambient temperature)
806 – 960 +45°/ –45° Polarization
86°
250 W (at 50 °C ambient temperature)
500 W (at 50 °C ambient temperature)
806 – 960
–45°
806 – 960
+45°
1710 – 2180
–45°
1710 – 2180
+45°
7-16
7-16
7-16
7-16
165°
7.2°
10
3
0
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0.5°– 7° electr. downtilt
1710 –2180 +45°/ –45° Polarization
Mechanical specifications
Input
165°
4.5°
Wind load
10
3
0
Horizontal Pattern
130
dB
3
Vertical Pattern
0°– 6° electr. downtilt
Bottom
2 x, Position bottom
continuously adjustable
Weight
10
0
4 x 7-16 female (long neck)
Connector position
Adjustment
mechanism
85°
dB
UMTS
XXPol Dual-b.
Electrical tilt
continuously adjustable
Max. wind velocity
33 kg
Frontal:
Lateral:
Rearside:
470 N (at 150 km/h)
380 N (at 150 km/h)
860 N (at 150 km/h)
200 km/h
Packing size
2966 x 304 x 204 mm
Height/width/depth
2635 / 262 / 149 mm
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Summary – Directional Antennas
Triple-band
UMTS
Dual Polarization + 45°/ –45° – 800/900 1800/1900 2000
Type
Type No.
Height
[mm]
Page
XXXPol A-Panel
806– 960
1710–1880
1920–2170
66°
66°
65°
15dBi
16.5dBi
17dBi
0°–12°T
0°–8°T
0°–8°T
742 270
1498
132
XXXPol A-Panel
806– 960
1710–1880
1920–2170
67°
65°
65°
16.5dBi
17.5dBi
18dBi
0°–10°T
0°–6°T
0°–6°T
742 271
2058
133
XXXPol A-Panel
806– 960
1710–1880
1920–2170
66°
67°
65°
17.5dBi
17.5dBi
18dBi
0°–7°T
0°–6°T
0°–6°T
742 272
2628
134
XXXPol A-Panel
824– 960
1710–2170
1710–2170
65°
65°
65°
17dBi
17dBi
16.5dBi
0°–7°T
0°–8°T
0°–8°T
742 241
2628
135
XXXPol A-Panel
806–960
1710–2180
1710–2180
65°
65°
65°
17.5dBi
17.5dBi
17dBi
2694
136
2°–10°T 800 10292
0°–10°T
0°–10°T
UMTS
XXXPol
Connector position: Bottom
131
Triple-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806 – 960 1710 –1880 1920 –2170
X
X
X
66°
66°
65°
0°– 1 2 °
0°– 8°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XXXPol A-Panel 806–960/1710–1880/1920–2170 66°/ 66°/65° 15/16.5/17dBi 0°–12°/0°–8°/0°–8°T
742 270
Type No.
Frequency range
806 –960
1710 –1880
880 – 960 MHz
1920 –2170
806 – 866 MHz
824 – 894 MHz
1710 – 1880 MHz 1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 14.8 dBi
2 x 15 dBi
2 x 15.2 dBi
2 x 16.5 dBi
2 x 17.2 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 69°
Vertical: 14.3°
Horizontal: 68°
Vertical:
14°
Horizontal: 66°
Vertical: 13.3°
Horizontal: 66°
Vertical:
7.1°
Horizontal: 65°
Vertical:
6.5°
Electrical tilt
continuously adjustable
0.5°– 12°
0.5°– 12°
0.5°– 12°
0.5°– 8°
0°– 8°
Vertical Pattern – sidelobe
0° ... 6° ... 12° T 0° ... 6° ... 12° T 0° ... 6° ... 12° T 0° ... 4° ... 8° T 0° ... 4° ... 8° T
suppression for first sidelobe 13 ... 12 ... 10 dB 14 ... 14 ... 14 dB 16 ... 16 ... 16 dB 17 ... 16 ... 15 dB 17 ... 15 ... 13 dB
above main beam
Front-to-back ratio, copolar
> 27 dB
> 27 dB
> 27 dB
> 23 dB
> 23 dB
Cross polar ratio
Maindirection
Sector
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
0°
±60°
Isolation: Intrasystem
Isolation: Intersystem
> 50 dB (806 – 960 // 1710 – 1880 MHz)11
> 50 dB (806 – 960 // 1920 – 2170 MHz)11
> 30 dB (1710 – 1880 // 1920 – 2170 MHz)
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
< –150 dBc
< –150 dBc
< –150 dBc
Max. power per input
250 W
200 W
(at 50 °C ambient temperature)
200 W
806 – 960 +45°/ –45° Polarization
130°
66°
14°
10
3
dB
3
dB
10
0
0
Horizontal Pattern
125°
806 – 960
+45°
1920 – 2170 1920 – 2170
+45°
–45°
1710 –1880 1710–1880
+45°
–45°
66°
7.1°
dB
dB
3
7-16
Input
0
0
Horizontal Pattern
7-16
7-16 7-16
Vertical Pattern
0.5°– 8° electrical downtilt
1920 –2170 +45°/ –45° Polarization
Connector position
Adjustment
mechanism
Wind load
65°
6.5°
0
Horizontal Pattern
132
3
dB
3
Max. wind velocity
10
10
7-16
6 x 7-16 female
Bottom
3 x, Position bottom
continuously adjustable
Weight
120°
7-16
Mechanical specifications
10
10
3
806 – 960
–45°
Vertical Pattern
0.5°– 12° electrical downtilt
1710 –1880 +45°/ –45° Polarization
dB
UMTS
XXXPol
Intermodulation IM3
(2 x 43 dBm carrier)
0
25 kg
Frontal:
Lateral:
Rearside:
260 N (at 150 km/h)
210 N (at 150 km/h)
580 N (at 150 km/h)
200 km/h
Packing size
1819 x 304 x 204 mm
Height/width/depth
1498 / 262 / 149 mm
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Triple-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806– 960 1710 –1880 1920 –2170
X
X
X
67°
65°
65°
0°– 10°
0°– 6°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XXXPol A-Panel 806–960/1710–1880/1920–2170 67°/ 65°/65° 16.5/17.5/18dBi 0°–10°/0°–6°/0°–6°T
742 271
Type No.
Frequency range
806–960
806– 866 MHz
824– 894 MHz
1710–1880
880– 960 MHz
1920–2170
1710 – 1880 MHz 1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 16 dBi
2 x 16.1 dBi
2 x 16.3 dB
2 x 17.5 dBi
+45°, –45°
2 x 18 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 69°
Vertical:
11°
Horizontal: 68°
Vertical: 10.7°
Horizontal: 67°
Vertical:
9.8°
Horizontal: 65°
Vertical:
5.1°
Horizontal: 65°
Vertical:
4.8°
Electrical tilt
continuously adjustable
0°– 10°
0°– 10°
0°– 10°
0°– 6°
0°– 6°
Vertical Pattern – sidelobe
0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 3° ... 6° T
0° ... 3° ... 6° T
suppression for first sidelobe 15 ... 15 ... 13 dB 15 ... 15 ... 13 dB 15 ... 15 ... 13 dB 14 ... 15 ... 16 dB 14 ... 14 ... 14 dB
above main beam
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
> 24 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10 dB
Isolation: Intrasystem
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 50 dB (806– 960 // 1710 – 1880 MHz)11
> 50 dB (806– 960 // 1920 – 2170 MHz)11
> 30 dB (1710 – 1880 // 1920 – 2170 MHz)
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
< –150 dBc
< –150 dBc
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
250 W
200 W
(at 50 °C ambient temperature)
UMTS
XXXPol
Isolation: Intersystem
200 W
806– 960 +45°/ –45° Polarization
130°
67°
10°
dB
3
3
dB
10
10
806– 960
–45°
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1710 –1880 +45°/ –45° Polarization
125°
1920 –2170 1920 –2170
+45°
–45°
7-16
65°
806– 960
+45°
7-16
1710 –1880 1710–1880
+45°
–45°
7-16 7-16
7-16
7-16
5.1°
Mechanical specifications
10
3
Input
dB
3
dB
10
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1920 –2170 +45°/ –45° Polarization
Adjustment
mechanism
65°
4.8°
dB
3
0
Horizontal Pattern
3
dB
10
10
Bottom
3 x, Position bottom
continuously adjustable
Weight
Wind load
120°
6 x 7-16 female
Connector position
0
Max. wind velocity
33 kg
Frontal:
Lateral:
Rearside:
370 N (at 150 km/h)
300 N (at 150 km/h)
820 N (at 150 km/h)
200 km/h
Packing size
2391 x 304 x 204 mm
Height/width/depth
2058 / 262 / 149 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
133
Triple-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806– 960 1710 –1880 1920 –2170
X
X
X
66°
67°
65°
0°–7°
0°– 6°
0°– 6°
set by hand or by optional RCU (Remote Control Unit)
XXXPol A-Panel 806–960/1710–1880/1920–2170 66°/ 67°/65° 17.5/17.5/18dBi 0°–7°/0°–6°/0°–6°T
742 272
Type No.
Frequency range
806–960
806– 866 MHz
824– 894 MHz
1710–1880
880– 960 MHz
1920–2170
1710 – 1880 MHz 1920 – 2170 MHz
Polarization
+45°, –45°
+45°, –45°
+45°, –45°
+45°, –45°
Gain
2 x 17 dBi
2 x 17.2 dBi
2 x 17.5 dBi
2 x 17.5 dBi
+45°, –45°
2 x 18 dBi
Half-power beam width
Copolar +45°/ –45°
Horizontal: 69°
Vertical: 7.8°
Horizontal: 68°
Vertical: 7.4°
Horizontal 66°
Vertical: 7°
Horizontal: 67°
Vertical: 5.2°
Horizontal: 65°
Vertical: 4.8°
Electrical tilt
continuously adjustable
0.5°– 7°
0.5°– 7°
0.5°– 7°
0°– 6°
0°– 6°
Vertical Pattern – sidelobe
0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 3° ... 6° T
0° ... 3° ... 6° T
suppression for first sidelobe 15 ... 15 ... 14 dB 15 ... 15 ... 14 dB 15 ... 15 ... 15 dB 14 ... 14 ... 14 dB 14 ... 14 ... 14 dB
above main beam
Front-to-back ratio, copolar
> 25 dB
> 25 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Maindirection
Sector
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
18 dB
> 10 dB
Typically:
20 dB
> 10 dB
Isolation: Intrasystem
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Isolation: Intersystem
> 50 dB (806– 960 // 1710 – 1880 MHz)11
> 50 dB (806– 960 // 1920 – 2170 MHz)11
> 30 dB (1710 – 1880 // 1920 – 2170 MHz)
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
< –150 dBc
< –150 dBc
< –150 dBc
Max. power per input
250 W
200 W
(at 50 °C ambient temperature)
200 W
806– 960 +45°/ –45° Polarization
130°
66°
7.5°
dB
3
3
dB
10
10
806– 960
–45°
0
0
Horizontal Pattern
Vertical Pattern
0.5°–7° electrical downtilt
1710 –1880 +45°/ –45° Polarization
125°
67°
806– 960
+45°
1920 –2170 1920 –2170
+45°
–45°
7-16
7-16
1710 –1880 1710–1880
+45°
–45°
7-16 7-16
7-16
7-16
5.2°
Mechanical specifications
10
3
Input
dB
3
dB
10
Connector position
0
0
Horizontal Pattern
Vertical Pattern
0°– 6° electrical downtilt
1920 –2170 +45°/ –45° Polarization
Adjustment
mechanism
Weight
Wind load
120°
65°
4.8°
3
0
Horizontal Pattern
134
3
dB
10
10
dB
UMTS
XXXPol
Intermodulation IM3
(2 x 43 dBm carrier)
Max. wind velocity
6 x 7-16 female
Bottom
3 x, Position bottom
continuously adjustable
40 kg
Frontal:
480 N (at 150 km/h)
Lateral:
390 N (at 150 km/h)
Rearside: 1060 N (at 150 km/h)
200 km/h
Packing size
3027 x 304 x 204 mm
Height/width/depth
2628 / 262 / 149 mm
0
Vertical Pattern
0°– 6° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Triple-multiband A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
824 – 960 1710 –2170 1710 –2170
X
X
X
65°
65°
65°
0°–7°
0°– 8°
0°– 8°
set by hand or by optional RCU (Remote Control Unit)
XXXPol A-Panel 824–960/1710–2170/1710–2170 65°/ 65°/65° 17/17/16.5dBi 0°–7°/0°–8°/0°–8°T
742 241
Frequency range
824–960
824 – 894 MHz
880 – 960 MHz
+45°, –45°
+45°, –45°
2 x 16.5 dBi
2 x 17 dBi
1710–2170 1710–2170
1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2170 MHz
+45°, –45°
+45°, –45°
+45°, –45°
Polarization
Gain: 824–960 MHz
1710–2170 MHz (bottom)
2 x 16.5 dBi
2 x 16.8 dBi
1710–2170 MHz (top)
2 x 16 dBi
2 x 16.3 dBi
Half-power beam width
Horizontal: 68° Horizontal: 65° Horizontal: 65° Horizontal: 65°
Copolar +45°/ –45°
Vertical:
8.1° Vertical:
7.5° Vertical:
7.8° Vertical:
7.3°
Electrical tilt
0.5°–7°
0.5°–7°
0°– 8°
0°– 8°
continuously adjustable
Vertical Pattern – sidelobe
0° ... 4° ... 7° T 0° ... 4° ... 7° T 0° ... 4° ... 8° T 0° ... 4° ... 8° T
suppression for first sidelobe 16 ... 16 ... 14 dB 16 ... 16 ... 14 dB 14 ... 14 ... 14 dB 16 ... 16 ... 15 dB
above main beam
Front-to-back ratio, copolar
> 26 dB
> 26 dB
> 25 dB
> 25 dB
Cross polar ratio
Typically:
Typically:
Typically:
Typically:
Maindirection
0°
20 dB
20 dB
16 dB
18 dB
Sector
±60°
> 10 dB
> 10 dB
> 10 dB
> 10 dB
Isolation: Intrasystem
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Isolation: Intersystem
> 50 dB (824 – 960 // 1710 – 2170 MHz)11
> 38 dB (1710 – 2170 // 1710 – 2170 MHz)
Impedance
50 Ω
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
Intermodulation IM3
< –150 dBc
< –150 dBc
(2 x 43 dBm carrier)
Max. power per input
250 W
200 W
(at 50 °C ambient temperature)
2 x 17 dBi
2 x 16.5 dBi
Horizontal: 63°
Vertical:
6.8°
0°– 8°
0° ... 4° ... 8° T
15 ... 16 ... 15 dB
> 25 dB
Typically:
20 dB
> 10 dB
> 30 dB
50 Ω
< 1.5
UMTS
XXXPol
Type No.
824 – 960 +45°/ –45° Polarization
125°
65°
7.5°
dB
3
3
dB
10
10
824 – 960
–45°
0
0
Horizontal Pattern
Vertical Pattern
0.5°–7° electrical downtilt
1710 –1880 +45°/ –45° Polarization
125°
65°
1710 – 2170 1710 – 2170
+45°
–45°
7-16
7-16
824 – 960
+45°
1710 – 2170 1710–2170
+45°
–45°
7-16 7-16
7-16
7-16
7.8°
Mechanical specifications
10
3
Input
dB
3
dB
10
Connector position
0
0
Horizontal Pattern
Vertical Pattern
0°– 8° electrical downtilt
1920 –2170 +45°/ –45° Polarization
Adjustment
mechanism
Weight
Wind load
115°
63°
6.8°
dB
3
0
Horizontal Pattern
3
dB
10
10
Max. wind velocity
6 x 7-16 female
Bottom
3 x, Position bottom
continuously adjustable
34 kg
Frontal:
480 N (at 150 km/h)
Lateral:
390 N (at 150 km/h)
Rearside: 1060 N (at 150 km/h)
200 km/h
Packing size
3027 x 304 x 204 mm
Height/width/depth
2628 / 262 / 149 mm
0
Vertical Pattern
0°– 8° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
135
Triple-multiband A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
806 – 960 1710 –2180 1710 –2180
X
X
X
65°
65°
65°
2°– 10°
0°– 10°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
XXXPol A-Panel 806–960/1710–2180/1710–2180 65°/ 65°/65° 17.5/17.5/17dBi 2°–10°/0°–10°/0°–10°T
800 10292
Type No.
Frequency range
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input
1710–2180 1710–2180
1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
+45°, –45°
+45°, –45°
+45°, –45°
880–960 MHz
+45°, –45°
17.4...17.4...17.1
2°...6°...10°
Horizontal: 69°
Vertical:
7.8°
2.5°–9.5°
2°...6°...10°
Horizontal: 68°
Vertical:
7.6°
2.5°–9.5°
2°...6°...10°
Horizontal: 66°
Vertical:
7.1°
2.5°–9.5°
16.5...16.7...16.5
16.2...16.3...16.1
0°...5°...10°
Horizontal: 65°
Vertical:
7.4°
0°–10°
2° ... 6° ... 10° T
17 ... 16 ... 14 dB
2° ... 6° ... 10° T
17 ... 16 ... 14 dB
2° ... 6° ... 10° T
17 ... 16 ... 14 dB
0° ... 5° ... 10° T
16 ... 16 ... 16 dB
> 30 dB
Typically:
25 dB
> 10 dB
avg. 20 dB
> 30 dB
> 30 dB
Typically:
25 dB
> 10 dB
avg. 20 dB
> 30 dB
50 Ω
< 1.5
50 Ω
< 1.5
< –150 dBc
17.0...17.1...16.7
16.7...16.7...16.4
0°...5°...10°
Horizontal: 64°
Vertical:
7.2°
0°–10°
17.3...17.4...16.8
17.0...17.0...16.5
0°...5°...10°
Horizontal: 60°
Vertical:
6.8°
0°–10°
0° ... 5° ... 10° T
16 ... 17 ... 16 dB
0° ... 5° ... 10° T
16 ... 16 ... 14 dB
> 26 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
> 30 dB
> 26 dB
Typically:
18 dB
> 10 dB
avg. 16 dB
> 30 dB
50 Ω
< 1.5
< –150 dBc
50 Ω
< 1.5
> 30 dB
> 26 dB
Typically:
Typically:
25 dB
18 dB
> 10 dB
> 10 dB
avg. 17 dB
avg. 14 dB
> 30 dB
> 30 dB
> 36 dB (806–960 // 1710–2180 MHz)11
> 36 dB (1710–2180 // 1710–2180 MHz)
50 Ω
50 Ω
< 1.5
< 1.5
250 W (at 50 °C ambient temperature)
200 W (at 50 °C ambient temperature)
806 – 960 +45°/ –45° Polarization
125°
66°
7.5°
10
3
1710 – 2180
–45°
dB
3
dB
10
1710 – 2180
+45°
0
0
Horizontal Pattern
Vertical Pattern
2°– 10° electrical downtilt
1710 – 2180 1710 – 2180
+45°
–45°
806 – 960
–45°
806 – 960
+45°
1710 –1990 +45°/ –45° Polarization
7-16
120°
7.3°
dB
dB
3
Connector position
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
1920 –2180 +45°/ –45° Polarization
115°
3
dB
10
10
7-16
7-16
Weight
Wind load
Max. wind velocity
6 x 7-16 female
Bottom
3 x, Position bottom
continuously adjustable
36 kg
Frontal:
490 N (at 150 km/h)
Lateral:
400 N (at 150 km/h)
Rearside: 1090 N (at 150 km/h)
200 km/h
Packing size
3027 x 304 x 204 mm
Height/width/depth
2694 / 262 / 149 mm
0
0
Horizontal Pattern
136
Adjustment
mechanism
60°
6.6°
3
7-16 7-16
Mechanical specifications
Input
10
10
3
7-16
65°
dB
UMTS
XXXPol
Polarization
Average Gain: (dBi)
1710–2180 MHz (Syst. bottom)
1710–2180 MHz (Syst. top)
Tilt
Half-power beam width
Copolar +45°/ –45°
Electrical tilt
continuously adjustable
Vertical Pattern – sidelobe
suppression for first sidelobe
above main beam
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
0°
Sector
±60°
±60°
Isolation: Intrasystem
Isolation: Intersystem
806–960
824–894 MHz
+45°, –45°
17.0...17.1...17.0
806 – 866 MHz
+45°, –45°
16.8...17.0...16.8
Vertical Pattern
0°– 10° electrical downtilt
Mounting accessories are not included in the scope of delivery (see page 228 – 233)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
Summary – Directional Antennas
Vertical Polarization
Single-band and Multi-band – UMTS
Vertical Polarization
Type
Height
[mm]
Page
800 10368
299
138
1710–2180
12°
18.5dBi
806–960/1710–2170
806–960/1710–2170
65°
65°
5dBi
5dBi
738 445
738 446
310
310
139
139
VPol LogPer
806–2170
65°
11dBi
742 192
300
140
VPol F-Panel
1710–2170
65°
18dBi
742 445
1302
141
VVPol F-Panel
824–960
1710–2170
C
90°
82°
7dBi
7dBi
742 290
328
142
VVPol F-Panel
824–960
1710–2170
C
90°
82°
10dBi
11dBi
800 10046
662
143
VPol BiDir
VPol BiDir
0°–10°T
UMTS
VPol
VPol F-Panel
Type No.
137
Multi-band F-Panel
Vertical Polarization
Half-power Beam Width
Fixed Electrical Downtilt
1710 –2180
V
12°
0°
VPol F-Panel 1710–2180 12° 18.5dBi 0°T
800 10368
Type No.
Frequency range
1710 – 1880 MHz
1710–2180
1850 – 1990 MHz
1920 – 2180 MHz
Polarization
Vertical
Vertical
Vertical
Gain
18.1 dBi
18.4 dBi
18.7 dBi
13.3°
12.8°
12°
Horizontal Pattern:
Half-power beam width
Front-to-back ratio (180° ± 30°)
> 30 dB
> 30 dB
> 30 dB
Sidelobe suppression
> 18 dB
> 18 dB
> 17 dB
37°
36°
36°
Electrical tilt
0°, fixed
0°, fixed
0°, fixed
Sidelobe suppression for first
sidelobe above main beam
> 18 dB
> 18 dB
> 18 dB
Vertical Pattern:
Half-power beam width
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
< –150 dBc (2 x 43 dBm carrier)
Max. power
300 W (at 50 °C ambient temperature)
UMTS
VPol
1710 – 1880 MHz
37°
13.3°
10
dB
3
dB
10
3
0
0
Horizontal Pattern
Vertical Pattern
1850 – 1990 MHz
1710 – 2180
VPol
36°
12.8°
7-16
10
dB
3
dB
10
Mechanical specifications
3
0
0
Horizontal Pattern
Input
Vertical Pattern
Connector position
1920 – 2180 MHz
Weight
Wind load
36°
12°
Max. wind velocity
400 N (at 150 km/h)
25 N (at 150 km/h)
400 N (at 150 km/h)
200 km/h
0
Horizontal Pattern
442 x 852 x 124 mm
dB
dB
Packing size
138
9 kg
Frontal:
Lateral:
Rearside:
10
10
3
1 x 7-16 female
Side (see picture)
3
Height/width/depth
299 / 743 / 69 mm
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Multi-band Bidirectional Antenna
Vertical Polarization
Half-power Beam Width
806 – 960/1710 –2170
V
65°
VPol BiDir 806–960/1710–2170 65° 5dBi
Type No.
738 445
738 446
Input
1 x 7-16 female
1 x N female
Frequency range
806 – 960 MHz, 1710 – 2170 MHz
< 1.7 (806 – 824 MHz)
< 1.5 (824 – 960 / 1710 – 2170 MHz)
806 – 960 MHz: 5 dBi
1710 – 1880 MHz: 5.5 dBi
1880 – 2170 MHz: 6.5 dBi
Impedance
371 mm
Gain
50 Ω
Polarization
400 mm
VSWR
Vertical
Max. power (total)
200 W (at 50 °C ambient temperature)
Weight
0.8 kg
Wind load
Frontal:
Lateral:
Rearside:
200 km/h
Packing size
422 x 212 x 95 mm
Height/width/depth
310 / 55 / 190 mm
Material:
Radiator: Tin plated copper.
Reflector: Weather-proof aluminum.
Radome: High impact plastic, colour: Grey.
All screws and nuts: Stainless steel.
Mounting:
Wall mounting: No additional mounting kit
needed.
For pipe mast mounting use clamps 734 360 –
734 365 (see page 220) (order separately).
Ice protection:
The radiating system is protected by the radome.
Due to its very sturdy construction, the antenna
remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the
inner conductor are DC grounded.
8.5 mm
UMTS
VPol
Max. wind velocity
25 N (at 150 km/h)
65 N (at 150 km/h)
35 N (at 150 km/h)
3
dB
10
0
Typical Horizontal Pattern
139
Logarithmic Periodic
Vertical Polarization
Half-power Beam Width
806 – 2170
V
65°
VPol LogPer 806–2170 65° 11dBi
Type No.
742 192
Input
1 x 7-16 female
Connector position
Bottom
Frequency range
806 – 1000 MHz
1000 – 1700 MHz
1700 – 2170 MHz
VSWR
< 1.5
< 1.5
< 1.5
Gain
11 dBi
11.3 dBi
11.5 dBi
50 Ω
50 Ω
50 Ω
Impedance
Polarization
Vertical
Vertical
Vertical
Front-to-back ratio
> 25 dB
> 25 dB
> 23 dB
65°
55°
55°
50°
50°
45°
< –150 dBc
< –150 dBc
< –150 dBc
Half-power Beam Width
horizontal
vertical
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
300 W
250 W
200 W
(at 50 °C ambient temperature)
Weight
5.7 kg
Wind load
Frontal:
Lateral:
Rearside:
Max. wind velocity
200 km/h
Packing size
360 x 175 x 1000 mm
Height/width/depth
300 / 155 / 785 mm
Material:
Radiator: Weather-proof aluminum.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Mounting:
The antenna can be mounted on tubular mast with a
diameter of 30 – 70 mm with supplied clamps.
Ice protection:
Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the
antenna remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the inner
conductor are DC grounded.
806 – 1000 MHz
1700 – 2170 MHz
0
Horizontal Pattern
140
3
10
0
Vertical Pattern
3
45°
10
dB
3
10
dB
10
50°
55°
0
Horizontal Pattern
3
dB
65°
dB
UMTS
VPol
20 N (at 150 km/h)
260 N (at 150 km/h)
30 N (at 150 km/h)
0
Vertical Pattern
Multi-band F-Panel
Vertical Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 –2170
V
65°
0°– 10°
set by hand or by optional RCU (Remote Control Unit)
VPol F-Panel 1710–2170 65° 18dBi 0°–10°T
742 445
Type No.
Frequency range
1710 – 1880 MHz
1710–2170
1850 – 1990 MHz
1920 – 2170 MHz
Polarization
Vertical
Vertical
Vertical
Gain
17.5 dBi
17.9 dBi
18.1 dBi
Horizontal: 65°
Vertical:
6.7°
Horizontal: 63°
Vertical:
6.5°
Half-power beam width
Horizontal:
Vertical:
Electrical tilt
68°
7°
0°– 10°
0°– 10°
0°– 10°
continuously adjustable continuously adjustable continuously adjustable
Vertical Pattern – sidelobe
suppression for first sidelobe
above main beam
Front-to-back ratio
0° ... 5° ... 10° T
18 ... 16 .... 13 dB
0° ... 5° ... 10° T
18 ... 17 ... 14 dB
0° ... 5° ... 10° T
18 ... 17 ... 14 dB
> 25 dB
> 25 dB
> 25 dB
Impedance
50 Ω
50 Ω
50 Ω
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power
300 W (at 50 °C ambient temperature)
1710 – 1880 MHz
130°
68°
3
dB
dB
3
UMTS
VPol
7°
10
10
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
continuously adjustable
1850 – 1990 MHz
125°
1710 – 2170
VPol
65°
7-16
6.7°
10
3
Mechanical specifications
dB
3
dB
10
Input
0
0
Horizontal Pattern
Vertical Pattern
0°– 10° electrical downtilt
continuously adjustable
1920 – 2170 MHz
120°
Adjustment
mechanism
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
63°
6.5°
Max. wind velocity
6.8 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)
110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h
dB
0
Horizontal Pattern
3
dB
10
10
3
1 x 7-16 female
Connector position
Packing size
1574 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
0
Vertical Pattern
0°– 10° electrical downtilt
continuously adjustable
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 182 – 191
141
Dual-band F-Panel
Vertical Polarization
Half-power Beam Width
Integrated Combiner
824 – 960
1710 –2170
V
V
90°
82°
C
VVPol F-Panel 824–960/1710–2170 C 90°/82° 7/7dBi
742 290
Type No.
Frequency range
Polarization
824 – 960 MHz
1710 – 2170 MHz
Vertical
Vertical
Gain
7 dBi
Half-power beam width
Front-to-back ratio
Horizontal:
Vertical:
Horizontal:
Vertical:
> 18 dB
> 20 dB
50 Ω
50 Ω
Impedance
VSWR
7 dBi
90°
60°
82°
70°
< 1.7 (824 – 960 MHz) < 1.7 (1710 – 2170 MHz)
< 1.5 (870 – 960 MHz) < 1.5 (1710 – 1990 MHz)
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
100 W (at 50 °C ambient temperature)
UMTS
VPol
Max. power
< –150 dBc
824 – 960
824 – 960
VPol
90°
60°
180°
1710 – 2170
VPol
C
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input
Connector position*
1710 –2170
1 x 7-16 female
Bottom or top
Weight
82°
70°
170°
Wind load
Max. wind velocity
2.5 kg
Frontal:
Lateral:
Rearside:
30 N (at 150 km/h)
25 N (at 150 km/h)
70 N (at 150 km/h)
200 km/h
Packing size
444 x 172 x 92 mm
Height/width/depth
328 / 155 / 69 mm
10
0
Horizontal Pattern
142
3
dB
3
dB
10
* Inverted mounting:
Connector position top: Change drain hole screw.
0
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
Dual-band F-Panel
Vertical Polarization
Half-power Beam Width
Integrated Combiner
824 – 960
1710 –2170
V
V
90°
82°
C
VVPol F-Panel 824–960/1710–2170 C 90°/82° 10/11dBi
800 10046
Type No.
Frequency range
Polarization
Gain
824 – 960 MHz
1710 – 2170 MHz
Vertical
Vertical
10 dBi
Half-power beam width
Front-to-back ratio
Horizontal:
Vertical:
Intermodulation IM3
(2 x 43 dBm carrier)
82°
19°
> 20 dB
50 Ω
50 Ω
< 1.7 (824 – 960 MHz)
< 1.5 (870 – 960 MHz)
< 1.5
< –150 dBc
< –150 dBc
100 W (at 50 °C ambient temperature)
UMTS
VPol
Max. power
Horizontal:
Vertical:
> 18 dB
Impedance
VSWR
11 dBi
90°
33°
824 – 960
824 – 960
VPol
90°
1710 – 2170
VPol
180°
C
33°
7-16
10
3
dB
3
dB
10
0
0
Horizontal Pattern
Mechanical specifications
Vertical Pattern
Input
Connector position*
1710 –2170
1 x 7-16 female
Bottom or top
Weight
82°
Wind load
170°
19°
Max. wind velocity
4.4 kg
Frontal:
Lateral:
Rearside:
65 N (at 150 km/h)
50 N (at 150 km/h)
160 N (at 150 km/h)
200 km/h
Packing size
804 x 172 x 92 mm
Height/width/depth
662 / 155 / 69 mm
10
0
Horizontal Pattern
3
dB
3
dB
10
0
* Inverted mounting:
Connector position top: Change drain hole screw.
Vertical Pattern
Mounting accessories are not included in the scope of delivery (see page 236 – 239)
143
144
Summary – Directional Antennas
Dual Polarization + 45°/ –45°
WiMax
Dual Polarization + 45°/ –45°
Type
Type No.
Height
[mm]
Page
XPol S-Panel
3300–3800
65°
17.5dBi
800 10390
650
146
XPol S-Panel
3300–3800
88°
16dBi
800 10436
650
147
WiMax
XPol
New Products
145
S-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
3300 – 3800
X
65°
Preliminary Issue
0°
XPol S-Panel 3300–3800 65° 17.5dBi 0°T
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Electrical tilt
800 10390
3300 – 3800 MHz
+45°, –45°
2 x 17.5 dBi
Horizontal: 65°
Vertical: 7°
0°, fixed
Front-to-back ratio (180° ±30°)
> 25 dB
Isolation, between ports
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
< –150 dBc
Max. power per input
50 W (at 50 °C ambient temperature)
WiMax
XPol
Intermodulation IM3
(2 x 43 dBm carrier)
3300 – 3800
+45
3300 – 3800
–45
N
N
Mechanical specifications
Input
Connector position
146
2 x N-connector female
Bottom
Max. wind velocity
200 km/h
Height/width/depth
Approx. 650 / 85 / 40 mm
Mounting accessories are not included in the scope of delivery (see page 236)
S-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
3300 – 3800
X
88°
Preliminary Issue
0°
XPol S-Panel 3300–3800 88° 16.5dBi 0°T
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Electrical tilt
800 10436
3300 – 3800 MHz
+45°, –45°
2 x 16.5 dBi
Horizontal: 88°
Vertical: 7°
0°, fixed
Front-to-back-ratio (180° ±30°)
> 25 dB
Isolation, between ports
> 25 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
50 W (at 50 °C ambient temperature)
3300 – 3800
+45
3300 – 3800
–45
N
N
WiMax
XPol
Type No.
Mechanical specifications
Input
Connector position
2 x N-connector female
Bottom
Max. wind velocity
200 km/h
Height/width/depth
Approx. 650 / 85 / 40 mm
Mounting accessories are not included in the scope of delivery (see page 236)
147
148
Summary – Directional Antennas
Vertical Polarization
WiMax
Vertical Polarization
VPol S-Panel
3300–3800
65°
17.5dBi
Type No.
Height
[mm]
Page
800 10457
650
150
New Product
WiMax
VPol
Type
149
S-Panel
Vertical Polarization
Half-power Beam Width
Fixed Electrical Downtilt
3300 – 3800
V
65°
Preliminary Issue
0°
VPol S-Panel 3300–3800 65° 17.5dBi 0°T
Type No.
Frequency range
Polarization
Gain
Half-power beam width
800 10457
3300 – 3800 MHz
Vertical
17.5 dBi
Horizontal: 65°
Vertical: 7°
Electrical tilt
0°, fixed
Front-to-back-ratio (180° ±30°)
> 25 dB
Impedance
VSWR
50 Ω
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
50 W (at 50 °C ambient temperature)
3300 – 3800
vertical
WiMax
VPol
N
Mechanical specifications
Input
Connector position
150
N-connector female
Bottom
Max. wind velocity
200 km/h
Height/width/depth
Approx. 650 / 85 / 40 mm
Mounting accessories are not included in the scope of delivery (see page 236)
Summary – Omnidirectional Antennas
800/900/1800/2000
Vertical Polarization – 800/900
Type
Type No.
Connector Height
female
[mm]
Remarks
Page
VPol Omni
VPol Omni
870–960
806–960
360°
360°
2dBi
2dBi
738 450
K 75 11 61
N
N
180
348
indoor/outdoor 152
153
VPol Omni
890–960
360°
5dBi
K 75 15 64 1
N
715
154
VPol Omni
870–960
360°
8dBi
736 350
7-16
1543
155
VPol Omni
806–894
360°
11dBi
738 192
7-16
3237
156
VPol Omni
870–960
360°
11dBi
736 347
7-16
3033
157
VPol Omni
870–960
360°
10.5dBi
736 349
7-16
2954
158
5°T
Vertical Polarization – Dual-band
VPol Omni
870–960/1710–1880 360°
2dBi
738 449
N
216
indoor/outdoor 159
VPol Omni
824–960/1805–2170 360°
2dBi
800 10147
N
216
indoor/outdoor 160
870–960/ 360°/
1920-2170 360°
9dBi
10dBi
80010274
7-16
3033
separate
inputs
161
VVPol Omni 870–960/1710–1880 360°
1920–2170 360°
2dBi
2dBi
800 10111
N
493
separate
inputs
162
739 785
7-16
807
163
738 187
737 190
7-16
7-16
1568
1560
164
165
VVPol Omni
Vertical Polarization – 1800
1710–1880
360°
8dBi
VPol Omni
VPol Omni
1710–1880
1710–1880
360°
360°
11dBi
11dBi
6°T
Omni
VPol
VPol Omni
Vertical Polarization – 1800/2000
VPol Omni
1710–2700
360°
2 dBi
800 10431
N
115
indoor/outdoor 166
VPol Omni
1920–2170
360°
11 dBi
741 790
7-16
1387
167
New Product
151
Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use
870 – 960
V
VPol Omni 870–960 360° 2dBi
738 450
Type No.
Input
N female
Connector position
Bottom or top
Frequency range
870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
< –150 dBc
Polarization
Vertical
Max. power
100 W (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Height
180 mm
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as
the inner conductor and the mounting kit
are DC grounded.
Omni
VPol
Material:
78°
3
dB
10
0
Vertical Pattern
152
180 mm
Intermodulation IM3
(2 x 43 dBm carrier)
Omnidirectional Antennas
Vertical Polarization
806 – 960
V
VPol Omni 806–960 360° 2dBi
K 75 11 61
Type No.
Frequency range
806 – 960 MHz
Vertical
Gain
2 dBi
Impedance
50 Ω
VSWR
348 mm
Polarization
< 1.5
Intermodulation IM3
(2 x 37 dBm carrier)
< –150 dBc
Max. power
100 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with
the supplied mounting kit:
1. On the tip of a tubular mast of 40 – 54 mm
diameter (connecting cable runs inside the
mast).
2. Laterally at the tip of a tubular mast of
20 – 54 mm diameter (connecting cable runs
outside the mast).
Material:
Radiator: Brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Grounding:
All metal parts of the antenna as well as
the inner conductor and the mounting kit
are DC grounded.
78°
3
dB
10
Omni
VPol
0
Vertical Pattern
Mechanical specifications
Input
Bottom
Weight
0.74 kg
Radome diameter
Wind load
Max. wind velocity
Packing size
On the tip
Laterally at the tip
Brackets for side mounting (see page 241 – 243)
N female
Connector position
Height
21 mm
17 N (at 150 km/h)
200 km/h
455 x 112x 97 mm
348 mm
153
Omnidirectional Antennas
Vertical Polarization
890 – 960
V
VPol Omni 890–960 360° 5dBi
K 75 15 64 1
Type No.
Frequency range
890 – 960 MHz
Polarization
Vertical
Gain
5 dBi
Impedance
50 Ω
VSWR
< 1.5
< –150 dBc
Max. power
715 mm
Intermodulation IM3
(2 x 37 dBm carrier)
250 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached in two ways with
the supplied mounting kit:
1. On the tip of a tubular mast of 40 – 54 mm
diameter (connecting cable runs inside the
mast).
2. Laterally at the tip of a tubular mast of
20 – 54 mm diameter (connecting cable runs
outside the mast).
Material:
Radiator: Brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Grounding:
All metal parts of the antenna as well as
the inner conductor and the mounting kit
are DC grounded.
30°
3
dB
10
Omni
VPol
0
Vertical Pattern
Mechanical specifications
Input
N female
Connector position
Bottom
Weight
0.90 kg
Radome diameter
Wind load
Max. wind velocity
Packing size
On the tip
154
Laterally at the tip
Height
21 mm
20 N (at 150 km/h)
200 km/h
825 x 112 x 97 mm
715 mm
Brackets for side mounting (see page 241 – 243)
Omnidirectional Antennas
Vertical Polarization
870 – 960
V
VPol Omni 870–960 360° 8dBi
Type No.
736 350
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
8 dBi
Impedance
50 Ω
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
1543 mm
VSWR
< –150 dBc
Max. power
500 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass. Radome:
Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
13°
3
dB
10
0
Omni
VPol
Vertical Pattern
Mechanical specifications
Input
230
um
maximtop
mast
Bottom
Weight
5.5 kg
150
Radome diameter
Wind load
Max. wind velocity
Packing size
104
Brackets for side mounting (see page 241 – 243)
7-16 female
Connector position
Height
51 mm
130 N (at 150 km/h)
200 km/h
1846 x 148 x 112 mm
1543 mm
155
Omnidirectional Antennas
Vertical Polarization
806 – 894
V
VPol Omni 806–894 360° 11dBi
Type No.
738 192
Frequency range
806 – 894 MHz
Polarization
Vertical
Gain
11 dBi
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
500 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
3237 mm
Max. power
7°
3
dB
10
0
Omni
VPol
Vertical Pattern
Mechanical specifications
Input
230
um
maximtop
mast
7-16 female
Connector position
Bottom
Weight
8.5 kg
150
Radome diameter
Wind load
Max. wind velocity
Packing size
104
156
Height
51 mm
230 N (at 150 km/h)
180 km/h
3516 x 148 x 112 mm
3237 mm
Brackets for side mounting (see page 241 – 243)
Omnidirectional Antennas
Vertical Polarization
870 – 960
V
VPol Omni 870–960 360° 11dBi
Type No.
736 347
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
11 dBi
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
500 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
3033 mm
Max. power
7°
3
dB
10
0
Omni
VPol
Vertical Pattern
Mechanical specifications
Input
um
maximtop
mast
230
Connector position
Weight
150
Radome diameter
Wind load
Max. wind velocity
Packing size
104
Brackets for side mounting (see page 241 – 243)
Height
7-16 female
Bottom
8 kg
51 mm
210 N (at 150 km/h)
200 km/h
3316 x 148 x 112 mm
3033 mm
157
Omnidirectional Antennas
Vertical Polarization
Fixed Electrical Downtilt
870 – 960
V
5°
VPol Omni 870–960 360° 10.5dBi 5°T
Type No.
736 349
Frequency range
870 – 960 MHz
Polarization
Vertical
Gain
10.5 dBi
Electrical tilt
5°, fixed
Impedance
50 Ω
VSWR
< 1.5
< –150 dBc
Max. power
2954 mm
Intermodulation IM3
(2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
7°
3
dB
10
0
Omni
VPol
Vertical Pattern
5° electrical downtilt
Mechanical specifications
Input
um
maximtop
mast
7-16 female
230
Connector position
Weight
8 kg
150
Radome diameter
Wind load
Max. wind velocity
Packing size
104
158
Height
Bottom
51 mm
210 N (at 150 km/h)
200 km/h
3316 x 148 x 112 mm
2954 mm
Brackets for side mounting (see page 241 – 243)
Dual-band Omni Antenna
Vertical Polarization
Indoor and outdoor use
870 – 960 / 1710–1880
V
VPol Omni 870–960/1710–1880 360° 2dBi
738 449
Type No.
Input
1 x N female
Connector position
Bottom or top
Frequency range
870 – 960 MHz / 1710 – 1880 MHz
VSWR
< 1.7
Gain
2 dBi
Impedance
50 Ω
< –150 dBc
Polarization
Vertical
Max. power
50 Watt: 870 – 960 MHz
50 Watt: 1710 – 1880 MHz
(at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
216 mm
Intermodulation IM3
(2 x 43 dBm carrier)
78°
Omni
VPol
3
dB
10
0
Vertical Pattern
159
Dual-band Omni Antenna
Vertical Polarization
Indoor and outdoor use
824 – 960 /1805 –2170
V
VPol Omni 824–960/1805–2170 360° 2dBi
800 10147
Type No.
Input
1 x N female
Connector position
Bottom or top
824 – 960 MHz / 1805 – 2170 MHz
VSWR
< 2.0
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt: 824 – 960 MHz
50 Watt: 1805 – 2170 MHz
(at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as
the inner conductor and the mounting kit
are DC grounded.
78°
Omni
VPol
3
dB
10
0
Vertical Pattern
160
216 mm
Frequency range
Dual-band Omni Antenna
Vertical Polarization
870 – 960
1920 – 2170
V
V
VVPol Omni 870–960/1920-2170 360°/360° 9/10dBi
800 10274
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Top system
870 – 960 MHz
Bottom system
1920 – 2170 MHz
Vertical
Vertical
9 dBi
10 dBi
Horizontal: Omni
Vertical:
11°
Horizontal: Omni
Vertical:
9°
Isolation, between ports
> 30 dB
Impedance
50 Ω
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
150 W
100 W
(at 50 °C ambient temperature)
3033 mm
VSWR
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductors of both systems are
coupled capacitively.
870 – 960
1920 – 2170
11°
9°
10
3
870 – 960
VPol
1920 –2170
VPol
7-16
7-16
0
Vertical Pattern
Omni
VPol
0
dB
3
dB
10
Vertical Pattern
123
48
Input
85
40
Connector position
Weight
240
maximum mast top
150
Mechanical specifications
Bottom view
Wind load
Max. wind velocity
10
4
870–960 MHz 1920–2170 MHz
top system
bottom system
Packing size
Height
Radome diameter
2 x 7-16 female
Bottom
8 kg
210 N (at 150 km/h)
200 km/h
3380 x 148 x 112 mm
3033 mm
51 mm
Layout of interface
Brackets for side mounting (see page 241 – 243)
161
Multi-band Omni Antenna
870 – 960
1710 –1880
1920 – 2170
V
V
Vertical Polarization
VVPol Omni 870–960/1710–1880/1920-2170 360°/360° 2/2dBi
800 10111
Polarization
Gain
Isolation, between ports
Upper unit
870 – 960 MHz
1710 – 1880 MHz
Lower unit
1920 – 2170 MHz
Vertical
Vertical
2 dBi
2 dBi
> 25 dB
> 25 dB
Impedance
50 Ω
50 Ω
VSWR
< 1.7
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power per input
50 W (at 50 °C ambient temperature)
493 mm
Frequency range
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit and screws: Stainless steel.
Mounting:
The antenna can be attached laterally at the
tip of a tubular mast of 40 – 70 mm diameter
with a mounting clamp supplied with the
antenna. The connecting cables (not supplied)
run outside the mast.
Excellent grounding:
The metal parts of the antenna and the mounting
kit (exclusive the inner conductor of the upper
unit) are DC grounded.
78°
130 mm
Type No.
870– 960
1710–1880
1920 – 2170
N
N
Omni
VPol
3
dB
10
0
Vertical Pattern
Mechanical specifications
Input
Connector position
Weight
Wind load
Max. wind velocity
Packing size
Bottom view
162
2 x N female
Bottom
0.85 kg
30 N (at 150 km/h)
200 km/h
665 x 112 x 97 mm
Height
493 mm
Radome diameter
30 mm
Omnidirectional Antenna
Vertical Polarization
1710–1880
V
VPol Omni 1710–1880 360° 8dBi
739 785
Type No.
Frequency range
1710 – 1880 MHz
Vertical
Gain
8 dBi
Impedance
50 Ω
VSWR
807 mm
Polarization
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power
200 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
one U-bolt bracket supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
13°
3
dB
10
0
Omni
VPol
Vertical Pattern
Mechanical specifications
Input
130
um
maximtop
mast
Connector position
Weight
Radome diameter
104
Wind load
Max. wind velocity
Packing size
Height
Brackets for side mounting (see page 241 – 243)
7-16 female
Bottom
4 kg
51 mm
90 N (at 150 km/h)
200 km/h
986 x 148 x 112 mm
807 mm
163
Omnidirectional Antennas
Vertical Polarization
1710–1880
V
VPol Omni 1710–1880 360° 11dBi
738 187
Type No.
Frequency range
1710 – 1880 MHz
Polarization
Vertical
Gain
11 dBi
Impedance
50 Ω
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
1568 mm
VSWR
< –150 dBc
Max. power
200 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
7°
3
dB
10
0
Omni
VPol
Vertical Pattern
Mechanical specifications
Input
230
um
maximtop
mast
7-16 female
Connector position
Bottom
Weight
5.5 kg
150
Radome diameter
Wind load
Max. wind velocity
Packing size
104
164
Height
51 mm
130 N (at 150 km/h)
200 km/h
1846 x 148 x 112 mm
1568 mm
Brackets for side mounting (see page 241 – 243)
Omnidirectional Antenna
Vertical Polarization
Fixed Electrical Downtilt
1710–1880
V
6°
VPol Omni 1710–1880 360° 11dBi 6°T
737 190
Type No.
Frequency range
1710 – 1880 MHz
Polarization
Vertical
Gain
11 dBi
6°, fixed
Impedance
50 Ω
VSWR
< 1.3
Intermodulation IM3
(2 x 43 dBm carrier)
1560 mm
Electrical tilt
< –150 dBc
Max. power
200 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
7°
3
dB
10
0
Omni
VPol
Vertical Pattern
6° electrical downtilt
Mechanical specifications
Input
230
um
maximtop
mast
Bottom
Weight
5.5 kg
150
Radome diameter
Wind load
Max. wind velocity
Packing size
104
Brackets for side mounting (see page 241 – 243)
7-16 female
Connector position
Height
51 mm
130 N (at 150 km/h)
200 km/h
1846 x 148 x 112 mm
1560 mm
165
Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use
1710–2700
V
VPol Omni 1710–2700 360° 2dBi
800 10431
Type No.
Input
N female
Connector position
Bottom or top
1710 – 2700 MHz
VSWR
< 1.8
Gain
2 dBi
Impedance
50 Ω
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Polarization
Vertical
Max. power
50 W (at 50 °C ambient temperature)
Weight
150 g
Radome diameter
20 mm
Height
115 mm
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
Grounding:
All metal parts of the antenna and the mounting
kit are DC grounded. The inner conductor is not
DC grounded.
78°
Omni
VPol
3
dB
10
0
Vertical Pattern
166
115 mm
Frequency range
Omnidirectional Antenna
Vertical Polarization
1920–2170
V
VPol Omni 1920–2170 360° 11dBi
741 790
Type No.
Frequency range
1920 – 2170 MHz
Polarization
Vertical
Gain
11 dBi
Impedance
50 Ω
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
1387 mm
VSWR
< –150 dBc
Max. power
150 W (at 50 °C ambient temperature)
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50 – 94 mm diameter with
one U-bolt bracket supplied with the antenna
(connecting cable runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Excellent grounding:
From the solid metal tip right down to the base
of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.
7°
3
dB
10
0
Omni
VPol
Vertical Pattern
Mechanical specifications
Input
130
um
maximtop
mast
Connector position
Weight
Radome diameter
104
Wind load
Max. wind velocity
Packing size
Height
Brackets for side mounting (see page 241 – 243)
7-16 female
Bottom
5 kg
51 mm
120 N (at 150 km/h)
200 km/h
1570 x 148 x 112 mm
1387 mm
167
168
Summary – Indoor Antennas
Vertical Polarization
Multi-band
Type
Type No.
Frequency
range
Connector
female
Page
VPol BiDir 824–960/1710–2170
65°
5dBi
738 446
824 – 960 MHz and
1710 – 2170 MHz
N
170
VVPol Indoor 806–960/1710–2700
90°
7dBi
800 10465
806 – 960 MHz and
1710 – 2700 MHz
N
171
VVPol Indoor 806–960/1710–2500
90°
7dBi
800 10248
806 – 960 MHz and
1710 – 2500 MHz
N
172
VPol Indoor 1710–2170
360°
2dBi
741 573
1710 – 2500 MHz
N
173
VPol Indoor 876–960/1710–2500
360°
2dBi
800 10137
876 – 960 MHz and
1710 – 2500 MHz
N
174
VPol Indoor 876–960/1710–2500
360°
2dBi
800 10173
876 – 960 MHz and
1710 – 2500 MHz
N
175
VPol Indoor 806– 960
VPol Indoor 1425–3800
VPol Indoor 5150–6000
360°
2dBi
800 10249
806 – 960 MHz and
1425 – 3800 MHz and
5150 – 6000 MHz
N
176
738 450
870 – 960 MHz
N
177
Indoor / Outdoor – Single-band
VPol Omni 870–960
360°
2dBi
Indoor / Outdoor – Dual-band / Multi-band
VPol Omni 870–960/1710–1880
360°
2dBi
738 449
870 – 960 MHz and
1710 – 1880 MHz
N
178
VPol Omni 1710–2170
360°
2dBi
738 454
1710 – 2200 MHz
N
179
VPol Omni 824–960/1805–2170
360°
2dBi
800 10147
824 – 960 MHz and
1805 – 2170 MHz
N
180
Indoor
VPol
New Product
169
Multi-band Bidirectional Antenna
Vertical Polarization
Half-power Beam Width
824 – 960/1710 –2170
V
65°
VPol BiDir 824–960/1710–2170 65° 5dBi
738 446
Type No.
Input
1 x N female
Frequency range
824 – 960 MHz, 1710 – 2170 MHz
< 1.5
824 – 960 MHz: 5 dBi
1710 – 1880 MHz: 5.5 dBi
1880 – 2170 MHz: 6.5 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power (total)
200 W (at 50 °C ambient temperature)
Weight
0.8 kg
Wind load
Frontal:
Lateral:
Rearside:
Max. wind velocity
25 N (at 150 km/h)
65 N (at 150 km/h)
35 N (at 150 km/h)
200 km/h
Packing size
422 x 212 x 95 mm
Height/width/depth
310 / 55 / 190 mm
Radiator: Tin plated copper.
Reflector: Weather-proof aluminum.
Radome: High impact plastic, colour: Grey.
All screws and nuts: Stainless steel.
Mounting:
Wall mounting: No additional mounting kit
needed.
For pipe mast mounting use clamps listed on the
datasheet (order separately).
Ice protection:
The radiating system is protected by the radome.
Due to its very sturdy construction, the antenna
remains operational even under icy conditions.
Grounding:
All metal parts of the antenna as well as the
inner conductor are DC grounded.
Indoor
VPol
Material:
3
dB
10
0
Typical Horizontal Pattern
170
372 mm
Gain
8.5 mm
400 mm
VSWR
Indoor Multi-band
Direct. Antenna
Vertical Polarization
Half-power Beam Width
Integrated Combiner
806 – 960
1710 –2700
V
V
90°
90°
Preliminary Issue
C
VVPol Indoor 806–960/1710–2700 C 90° 7dBi
800 10465
Type No.
806 – 960 MHz / 1710 – 2700 MHz
Polarization
Vertical
Gain
Approx. 7 dBi
Half-power beam width
Horizontal: Approx. 90°
Impedance
50 Ω
VSWR
Max. power
Input
806
1710
2200
2400
–
–
–
–
960
2200
2400
2700
MHz:
MHz:
MHz:
MHz:
<
<
<
<
2.0
2.0
2.5
2.0
50 W (at 50 °C ambient temperature)
Cable RG 223/CU of 1m length, white,
with N female connector
Protection class
IP 30
Weight
500 g
Packing size
363 x 152 x 62 mm
Height/width/depth
231 / 140 / 50 mm
Material:
Mounting:
806–960
VPol
1710–2700
VPol
C
N
7-16
Reflector: Aluminum.
Radome: High impact polystyrol, colour: White.
Additional painting is possible.
Mounting plates: Stainless steel.
Two holes of 6 mm diameter in the mounting plate.
Screws are not supplied.
Avoid to stress the cable.
90°
10
3
Grounding:
Available accessories:
All metal parts inclusive the inner conductor are
DC grounded.
dB
Frequency range
0
Horizontal Pattern
Broadband power splitters and tappers
(800 – 2700 MHz).
Indoor
VPol
Mounting:
Mount the attachment plate to the wall
using two screws of 4 mm diameter
in the position as indicated.
Align the antenna over the
attachment plate.
Pull the antenna to the stop.
171
Indoor Multi-band
Direct. Antenna
Vertical Polarization
Half-power Beam Width
Integrated Combiner
806 – 960
1710 –2500
V
V
90°
90°
C
VVPol Indoor 806–960/1710–2500 90° 7dBi
800 10248
Type No.
806 – 960 MHz / 1710 – 2500 MHz
Polarization
Vertical
Gain
≈ 7 dBi
Half-power beam width
Horizontal: ≈ 90°
Impedance
50 Ω
VSWR
Max. power
Input
806
1710
2200
2400
–
–
–
–
960
2200
2400
2500
MHz:
MHz:
MHz:
MHz:
<
<
<
<
2.0
2.0
2.5
2.0
50 W (at 50 °C ambient temperature)
Cable RG 223/CU of 1m length, white,
with N female connector
Protection class
IP 30
Weight
500 g
Packing size
363 x 152 x 62 mm
Height/width/depth
231 / 140 / 50 mm
Material:
Mounting:
806–960
VPol
1710–2500
VPol
C
N
7-16
Reflector: Aluminum.
Radome: High impact polystyrol, colour: White.
Additional painting is possible.
Mounting plates: Stainless steel.
Two holes of 6 mm diameter in the mounting
plate. Screws are not supplied.
Avoid to stress the cable.
90°
10
3
Grounding:
Available accessories:
All metal parts inclusive the inner conductor are
DC grounded.
dB
Frequency range
0
Horizontal Pattern
Broadband power splitters and tappers
(800 – 2500 MHz).
Indoor
VPol
Mounting:
Mount the attachment plate to the wall
using two screws of 4 mm diameter
in the position as indicated.
172
Align the antenna over the attachment
plate.
Pull the antenna to the stop.
Indoor Omnidirectional Antenna
Vertical Polarization
Multi-band
1710 –2500
V
The antenna can be operated in the total frequency range
simultaneously.
● The antenna needs no additional groundplane.
●
VPol Indoor 1710–2500 360° 2dBi
100 mm dia.
741 573
Type No.
Frequency range
1710 – 2500 MHz
VSWR
1710
1850
1920
2170
–
–
–
–
1880
1990
2170
2500
MHz:
MHz:
MHz:
MHz:
Input
1 x N female
Gain
2 dBi
Impedance
50 Ω
Polarization
<
<
<
<
1.6
1.6
1.6
2.0
Vertical
Max. power (per band)
50 W (at 50 °C ambient temperature)
Weight
150 g
Diameter
100 mm
Height
50 mm (without connector)
Material:
Base: Aluminum.
Protective housing: High impact polystyrol,
colour: White.
Additional painting is possible.
Mounting:
Holes in the base enable a mounting on the
ceiling. Screws are supplied.
For the N connector a hole in the ceiling with
a diameter of 35 mm is required.
Grounding:
All metal parts including the inner conductor
are DC grounded.
Available accessories:
Broadband power splitters and tappers
(800 – 2500 MHz).
min. dia. 35 mm
N connector, female
Indoor
VPol
80 mm
2 holes dia. 5 mm
12.9 mm
Clip the protective housing into position after
the antenna has been mounted with the help
of the three supplied screws.
173
Indoor Multi-band
Omni Antenna
Vertical Polarization
876 – 960
1710 –2500
V
The antenna can be operated in all frequency ranges
simultaneously.
● The antennas need no additional groundplane.
●
VPol Indoor 876–960/1710–2500 360° 2dBi
∅ 260 mm
800 10137
Type No.
Frequency range
876 – 960 MHz
1710 – 2500 MHz
VSWR
<
<
<
<
1.9:
1.6:
1.6:
2.0:
876
890
1710
2170
–
–
–
–
890
960
2170
2500
Input
1 x N female
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power (per band)
MHz
MHz
MHz
MHz
741 572
50 W (at 50 °C ambient temperature)
Weight
300 g
Diameter
210 mm
Height
78 mm (without connector)
Material:
Base: Aluminum.
Protective housing: High impact polystyrol,
colour: White.
Additional painting is possible.
Mounting:
Three holes in the base enable a mounting on
the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm is required.
Grounding:
All metal parts including the inner conductor
are DC grounded.
Available accessories:
Broadband power splitters and tappers
(800 – 2500 MHz).
min. dia. 35 mm
dia. 160 mm
3 holes dia. 5 mm
Indoor
VPol
N connector, female
13 mm
174
Clip the protective housing into position after
the antenna has been mounted with the help
of the three supplied screws.
Indoor Multi-band
Omni Antenna
Vertical Polarization
●
876 – 960
1710 –2500
V
The antenna needs no additional groundplane.
VPol Indoor 876–960/1710–2500 360° 2dBi
∅ 215 mm
800 10173
Type No.
Frequency range
876 – 960 MHz
1710 – 2500 MHz
Polarization
Vertical
Gain
2 dBi
Impedance
50 Ω
VSWR
876
890
1710
2170
Max. power (per band)
Input
–
–
–
–
890
960
2170
2500
MHz:
MHz:
MHz:
MHz:
<
<
<
<
1.8
1.6
1.6
2.0
50 W (at 50 °C ambient temperature)
1 x N female
Weight
340 g
Diameter
215 mm
Height
85 mm (without connector)
Material:
Base: Aluminum.
Protective housing: High impact polystyrol,
colour: White.
Additional painting is possible.
Mounting:
Three holes in the base enable a mounting on
the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm is required.
Grounding:
All metal parts including the inner conductor
are DC grounded.
Available accessories:
Broadband power splitters and tappers
(800 – 2500 MHz).
min. dia. 35 mm
13 mm
Indoor
VPol
3 holes dia. 5 mm
dia. 160 mm
N connector, female
Clip the protective housing into position after
the antenna has been mounted with the help
of the three supplied screws.
175
Indoor Multi-band
Omni Antenna
Vertical Polarization
806 – 960
1425–3800 5150–6000
V
The antenna can be operated in all frequency ranges
simultaneously.
● The antennas need no additional groundplane.
●
VPol Indoor 806–960/1425–3800/5150–6000 360° 2dBi
800 10249
Type No.
Frequency range
806 – 960 MHz
1425 – 3800 MHz
5150 – 6000 MHz
Polarization
Vertical
Gain
≈ 2 dBi
Impedance
50 Ω
VSWR
806
1425
1710
2200
5150
Max. power
–
–
–
–
–
960
1710
2200
3800
6000
MHz:
MHz:
MHz:
MHz:
MHz:
<
<
<
<
<
1.5
2.0
1.4
1.6
2.0
50 W (at 50 °C ambient temperature)
Input
1 x N female
Protection class
IP 30
Weight
466 g
Packing size
277 x 277 x 169 mm
Diameter
258 mm
Height
94 mm (without connector)
Material:
Reflector: Aluminum.
Radome: High impact polystyrol, colour: White.
Additional painting is possible.
Mounting:
Three holes in the base enable a mounting on
the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm is required.
Available accessories:
Broadband power splitters and tappers
(800 – 2500 MHz).
min. dia. 35 mm
dia. 160 mm
Indoor
VPol
3 holes dia. 5 mm
N connector, female
Clip the protective housing into position after
the antenna has been mounted with the help
of the three supplied screws.
176
Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use
870 – 960
V
VPol Omni 870–960 360° 2dBi
738 450
Type No.
Input
N female
Connector position
Bottom or top
Frequency range
870 – 960 MHz
VSWR
< 1.5
Gain
2 dBi
Impedance
50 Ω
< –150 dBc
Polarization
Vertical
Max. power
100 W (at 50 °C ambient temperature)
Weight
200 g
Radome diameter
20 mm
Height
180 mm
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as
the inner conductor and the mounting kit
are DC grounded.
180 mm
Intermodulation IM3
(2 x 43 dBm carrier)
78°
3
dB
10
0
Indoor
VPol
Vertical Pattern
177
Dual-band Omni Antenna
Vertical Polarization
Indoor and outdoor use
870 – 960 / 1710–1880
V
VPol Omni 870–960/1710–1880 360° 2dBi
738 449
Type No.
Input
1 x N female
Connector position
Bottom or top
Frequency range
870 – 960 MHz / 1710 – 1880 MHz
VSWR
< 1.7
Gain
2 dBi
Impedance
50 Ω
< –150 dBc
Polarization
Vertical
Max. power
50 W: 870 – 960 MHz
50 W: 1710 – 1880 MHz
(at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
78°
3
dB
10
0
Indoor
VPol
Vertical Pattern
178
216 mm
Intermodulation IM3
(2 x 43 dBm carrier)
Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use
1710–2200
V
VPol Omni 1710–2200 360° 2dBi
738 454
Type No.
Input
N female
Connector position
Bottom or top
1710 – 2200 MHz
VSWR
1710 – 2170 MHz: < 1.5
2170 – 2200 MHz: < 1.8
Gain
2 dBi
Impedance
115 mm
Frequency range
50 Ω
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Polarization
Vertical
Max. power
50 W (at 50 °C ambient temperature)
Weight
150 g
Radome diameter
20 mm
Height
115 mm
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
Grounding:
All metal parts of the antenna and the mounting
kit are DC grounded. The inner conductor is not
DC grounded.
78°
3
dB
10
0
Indoor
VPol
Vertical Pattern
179
Dual-band Omni Antenna
Vertical Polarization
Indoor and outdoor use
824 – 960 /1805 –2170
V
VPol Omni 824–960/1805–2170 360° 2dBi
800 10147
Type No.
Input
1 x N female
Connector position
Bottom or top
824 – 960 MHz / 1805 – 2170 MHz
VSWR
< 2.0
Gain
2 dBi
Impedance
50 Ω
Polarization
Vertical
Max. power
50 Watt: 824 – 960 MHz
50 Watt: 1805 – 2170 MHz
(at 50 °C ambient temperature)
Weight
250 g
Radome diameter
20 mm
Height
216 mm
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm diameter) to surfaces
of max. 10 mm thickness.
Grounding:
All metal parts of the antenna as well as
the inner conductor and the mounting kit
are DC grounded.
78°
3
dB
10
0
Indoor
VPol
Vertical Pattern
180
216 mm
Frequency range
Summary – Remote Electrical Tilt (RET)
Type
Type No.
Kathrein’s Remote Electrical Tilt System
Page
182
General information
Instructions for RCU Installation
188
Instructions of Feederline Installation
on A-Panels and F-Panel with four connectors arranged on two levels
189
Triple-band antennas with Kathrein installation tool
190
Data sheets of RET-components
Slimline Remote Control Unit (RCU)
860 10025
191
Slimline Remote Control Unit (RCU)
860 10118
192
860 10006 / 860 10026
193
Central Control Unit with Layer-one Converter (CCU-LOC)
860 10068
194
Central Control Unit (CCU) for outdoor use
860 10113
196
Portable Control Adapter (PCA)
860 10046
197
Power Supply and Signal Cable
860 10007, ...
198
860 10078 / ..79 / ..84 / ..90
199
DC Power and Signal Splitter
860 10002
200
Lightning Protection Device
860 10030
201
Earthing Clamp
860 10031
202
Double Tower Mounted Amplifier
782 10147
203
Double Tower Mounted Amplifier
782 10148
204
782 10253 / ..54 / ..55 / ..56
205
Central Control Unit (CCU) for indoor use
SMB Control Cable
Smart Bias Tee
782 10453 / ..54 / ..55 / ..56
Bias Tee
782 10429
206
Antenna System Manager (ASM)
General information
207
Edition and Support
208
RET
New Products
181
Kathrein’s Remote Electrical Tilt System
The answer to all current and future network demands
Network planning is becoming ever more complicated, especially with the advent of 3G.
The challenge for wireless network operators is to
balance coverage, capacity, call quality and costs in
order to gain maximum revenue from their network.
Each of the above factors affects the others and so
network engineers use many different techniques
RET
However, with Kathrein’s Remote Electrical Tilt unit
engineers can make the necessary adjustments without shutting down the whole system !
Further advantages of using Kathrein’s Remote
Electrical Tilt (RET) system :
– No need for specialized teams trained in altitude
work or with special safety skills
– Limited site access and/or time restrictions are not
so important
– No special platforms or other means of access to the
antenna are required
– Adjustments can be made and the relevant
measurements performed speedily
– Network alterations can be carried out irrespective
of weather conditions
– No reduction in coverage – cells remain fully
operational whilst changes are being made
– Operators estimate that approx. 20 % of UMTS
equipment can be saved by using such a RET
system.
182
for establishing the right balance they are trying to
achieve.
One of these methods is adjusting the antenna’s
downtilt. Here, the engineer must take into consideration certain facts, such as the weather, access to
the cell site, availability of specialized installation
teams and special equipment etc. Moreover, such
an antenna adjustment can typically take several
hours to perform.
Since the cell site is usually switched off for safety
reasons during such an adjustment, this results in
lost calls and therefore revenue whilst these changes are being made. Consequently, operators tend
to make fewer adjustments and so networks are
often left operating unoptimized, which also eventually results in lost revenue for the operators.
Kathrein’s Remote Electrical Tilt System
RET components
Slimline RCU
(Remote Control Unit)
CCU (Central Control Unit)
CCU with LOC
(Central Control Unit with
Layer-one Converter)
DC Power and Signal Splitter
Control Cable
Optional:
Smart Bias Tee
SMB Control Cable
Lightning Protection Device
Bias Tee
Earthing Clamp
RET
Kathrein’s overall RET system
works in accordance with
the AISG (Antenna Interface
Standards Group) standard and
3 GPP (3rd Generation Partnership Project).
DTMA (Double Tower Mounted
Amplifier)
183
Kathrein’s Remote Electrical Tilt System
Ways of controlling the RET System:
Central Control Unit (CCU)
The major component for controlling the RCU is the
Central Control Unit (CCU), which is located at the
BTS. In order to cover all required applications, the
CCU can be accessed from the Operational
Maintenance Center (OMC) via the Ethernet input
and/or directly through a personal computer via the
RS 232 input.
The maximum number of RCUs controlled by a
single CCU and the amount of cable length usable,
depend on losses suffered along the cables (e.g. a
maximum of 9 RCUs with 100 m of cable).
Controlling several RCUs can be achieved through
the use of splitters or the daisy-chain functionality of
the RCUs.
Communication between the CCU and RCU
Three options are offered:
– Separate cables
– Using Smart Bias Tee´s in the feeder lines
– Via TMA
Portable Control Adapter (PCA)
RCU
RCU
RCU
Antenna
RCU
Antenna
RCU
Antenna
RCU
RET
The PCA is a portable controller for Kathrein’s
Remote Electrical Tilt system (RET). It is a simple
device for running the remote control unit (RCU)
attached to Kathrein base station antennas, and for
adjusting the vertical electrical downtilt locally.
This product is designed for portable applications
and for use by installers or maintenance staff with
temporary access to the RCUs. The standard
Central Control Unit (CCU) is not required.
PCA
AISG
24 V DC
60 W
Notebook
PCA software
184
USB
Power supply
90 – 264 V AC
47 – 63 Hz
The PCA consists of a small control box and
Windows-based software to be installed on a
laptop. The control box with dimensions of
160 x 95 x 40 (W x L x H) transforms the USB interface into an AISG-conform interface (RS 485 + DC
voltage). Together with the supplied software, all
functions of the RCU can be controlled via a laptop
or PC.
Up to nine RCUs can be controlled using a single
PCA.
This can be achieved either through the use of a
splitter or via the daisy-chain functionality of the
RCUs.
Upgrading the unit to offer remote control via the
OMC is very easily possible, by just connecting the
standard CCU instead of the PCA.
Kathrein’s Remote Electrical Tilt System
Ways of controlling the RET System:
Communication between the OMC and CCU
be sent to the site. A laptop is basically connected
to the Ethernet interface on the CCU. Alternatively,
the RS 232 interface may be used. Instead of a
CCU, a PCA can also be used for local control.
Local control:
The configuration of the RET system and simple
adaptation to network changes can be effected via
local control. In this case, an installation team must
The following transport and application protocols
are served by the CCU: TCP/IP, UDP, PPP, DHCP,
HTML and ICMP/Ping, FTP, and SNMP.
RET
The electrical tilt can be controlled either locally or
remotely.
Remote control:
Due to the required UMTS network optimizations,
the downtilt of an antenna’s vertical radiation
pattern has to be adjusted much more frequently
than as compared with a GSM network. To meet
this demand, a remote controlled system via the
OMC is inevitable. The Ethernet interface can be
selected for implementing remote control in a local
area network (LAN) or a wide area network (WAN).
185
Kathrein’s Remote Electrical Tilt System
RET – Software Tools
RET – Browser Application
The CCU runs a web-server. RCUs and CCUs, as
part of a network, can be configured and controlled
through a standard browser, e.g. Netscape, Internet
Explorer – no additional software is required. The
RET system can be controlled over a long distance
directly on site.
The connection to each CCU is easily generated
simply by typing in its own individual IP address.
The website which appears contains all the
required control functions for normal service and
installation. In addition to permitting the configuration and control of the connected RCUs and TMAs,
the CCU program also displays the device status,
command history list and various types of system
errors. Via the alarm interface all AISG alarms can
be read off.
It is also possible to perform CCU software updates. The browser application is a helpful tool for
tion
forma
ther in e
r
u
f
r
Fo
see th nual !
a
are m
w
soft
the installation team on site, especially during the
initial configuration of a RET system.
Each CCU, and with it each of the connected
RCUs, can be addressed and controlled individually. Therefore, the browser application also offers a
practical solution for responding to new situations
by changing the individual downtilt angles quickly
and easily.
RET – Antenna System Manager (ASM)
RET
An OMC may control hundreds of sites. The
IP/Browser solution is not suitable for the easy
control of more than one CCU. Access to the
various CCUs takes place in a serial form, which
consequently takes up rather a lot of time. Further
adverse features of such a Browser solution for an
OMC are:
– No reference to site names.
– With HTML the whole page has to be transferred,
even if only one value changes (very time
consuming, especially with a modem).
Optimised solution: Antenna System Manager
The Antenna System Manager is a type of SNMPbased software installed on the OMC computer.
The ASM offers the following features:
– The number of controllable CCUs and connected AISG devices is unlimited.
– The current data is collected and permanently
updated in the OMC computer. The CCU access
186
–
–
–
–
ation
inform
r
e
h
t
r
7
For fu e page 20
se
is only required for new adjustments.
The CCU access is organized by the ASM automatically.
Fast transfer rates due to reduced data quantity
(especially with modem mode).
Explorer enables “family-tree” structure, giving
regions and site names.
The ASM offers the basis for a customized interface connection to the OMC software.
Kathrein’s Remote Electrical Tilt System
Kathrein’s RET system is already used and
installed all over the world
UMTS site of the operator THC in
Taipei (Taiwan) with Kathrein’s RET
system.
UMTS site of the operator T-Mobile
in Germany with Kathrein’s new
Tri-sector pipe antenna and integrated RET system (new slimline
RCUs) and TMAs.
UMTS site with Kathrein’s RET
system (new slimline RCUs) and
the triple-band antenna type
742 270.
UMTS site of the operator Centertel
in Poland with Kathrein’s RET
system.
UMTS site of the operator
T-Mobile at the “Oktoberfest” in
Munich (Germany) with Kathrein’s
RET system.
187
RET
UMTS site of the operator
Vodafone in Germany with
Kathrein’s RET system.
Instructions for RCU Installation
Attaching the RCU (Remote Control Unit) for remote-controlled downtilt adjustment:
Clean the thread surface.
Apply the mounting-paste evenly
onto the full circumference of the
thread as illustrated in the figure.
Twist off the protective cap
completely from the antenna.
Check the proper function of
the phase shifter over the
entire adjustment range by
twisting the adjustment
wheel in such a way, that the
spindle moves completely in
and out.
Reset the downtilt to 0
degree.
Completely remove the black
adjustement wheel by simply
pulling it downwards.
Note!
Avoid ingestion and contact
with eyes.
In case of contact with eyes
rinse thoroughly with plenty of
water and seek medical advice.
Avoid long-term contact with
skin.
In case of contact with skin
wash off with soap and water.
For further information please
read the ‘Safety data-sheet
(91/155 EEC), Anti-Seize ‘HighTech’ Assembly Paste different
packing sizes’ by company
WEICON GmbH & Co. KG,
Königsberger Str. 225, D-48157
Münster, http://www.weicon.de
Push the attachment nut of the
RCU down towards the housing.
Place the RCU carefully over
the adjustment spindle, observing the correct alignment of the
RCU with regards to the antenna, i.e. the flat surfaces of the
attachment fixture on the
antenna side and those inside
the RCU housing must lie flat
against each other.
Push-up the RCU carefully to
the stop at the antenna.
Please note!
Do not twist the RCU during
attaching to the antenna, as
this may damage the adjustment spindle.
Tighten the RCU attachment
nut using a torque-wrench;
wrench width = 41 mm,
min. torque = 15 Nm,
max. torque = 18 Nm.
Connect the RCU control cable
immediately after attachment of
the RCU. The tightening torque
for fixing the control cable connector must be 0.5 – 1.0 Nm
(‘hand-tightened’).
Please note!
In cases where a mechanical
downtilt unit is installed, this
must not be set for a downtilt
of more than 14 degrees.
Connecting the control cables:
RET
Connect a control cable to the
daisy chain input of the RCU.
The tightning torque for fixing
the connector must be 0.5 –
1.0 Nm (‘hand-tightened’).
The connector should be
thightened by hand only!
Please note: If the daisy
chain output is not used,
do not remove the daisy
chain termination.
188
For the daisy chain solution,
remove the daisy chain termination and attach control
cable to interconnect with the
daisy chain input of the subsequent RCU.
Please note: Do not remove
the daisy chain termination
of last RCU device.
Important:
To remove the daisy chain
termination, only twist the
upper thumb wheel (near
the RCU).
Important:
Do not twist the lower
thumb wheel of the daisy
chain termination as this
may cause damage to the
RCU output socket.
General Instructions for Feederline Installation
on A-Panels and F-Panels
with four Connectors arranged on two Levels
Please note: In order not to damage the interfaces, please make sure that only the right tools are used.
Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench
width.
Description of connector arrangement:
4
2
3
1
There are four interfaces for feeding the antenna
located at the bottom.
The connectors are mounted at two levels in order to facilitate feederline
installation.
Attachment of the feederline connector and RCU (optional):
In order to protect the adjustment mechanism the protective caps have to be attached during
feederline installation!
Start with the rearside located interface no. 1.
Place the connector carefully and fix the
nut using a torque-wrench (according to
the manufacturers guidelines).
After feederline installation the optional
remote control units (RCU) can be
mounted if required.
For a full description of RCU installation
please refer to the respective data sheet.
Please note: Additional weather sealing of correctly installed feederline connector interfaces is not required,
nor is it recommended by the connector manufacturers.
189
RET
The further sequence for the installation
is: feederlines no. 2, 3, 4.
General Instructions for Feederline Installation
for Triple-band Antennas
with Kathrein Installation Set, Type No. 850 10005
Please note: To avoid any damage to the interfaces, please ensure that only suitable tools are used. To
tighten the feederline connector interfaces, we strongly recommend using a special Kathrein installation tool
(as shown below) in combination with a standard torque-wrench.
Description of connector arrangement:
2
1
8
Adjustment mechanisms (1 – 3)
3
6
4
5
7
9
Feederline connectors (4 – 9)
There are six feederline connectors and three adjustment mechanisms located at the bottom
of the antenna.
Attachment of the feederline connector and RCU (optional):
In order to protect the adjustment mechanism the protective caps have to be attached during
feederline installation!
Kathrein installation set: Type No. 850 10005
Set has to be ordered separately!
Set consists of two spanners of 27 and 32 mm width.
1/2″ square actuation according to
DIN 3120 Form C
The sequence for installation is:
feederline no. 4, 5, 6, 7, 8, 9.
Put the connector carefully in
place and hand-screw the nut.
Use a torque-wrench to finish
installation (see installation tool).
These tools are suitable for 7-16 connectors with a wrench
size of 27 mm or 32 mm.
Tighten nut within a torque range of 25 – 33 Nm depending
on connector manufacturers’ specifications.
RET
Repeat operations as shown for
each feederline!
27 or 32 mm
After feederline installation, the optional remote control units (RCU)
can be mounted if required. For a full description of RCU installation
please refer to the respective data sheet.
Please note: Additional weather sealing of correctly installed feederline connector interfaces is not required,
nor is it recommended by the connector manufacturers.
190
Remote Control Unit (RCU)
Remote Control Unit (RCU) for Kathrein base station antennas with adjustable
electrical downtilt and appropriate mechanical interface.
860 10025
Type No.
Input voltage range
Pin 6: 10 ... 30 V
Pin 1: 10 ... 30 V
Power consumption
< 1 W (stand by); < 8.5 W (motor activated)
2 x 8 pin connector according to IEC 60130-9; according to AISG
Daisy chain in: male; Daisy chain out: female
Connectors 1)
Hardware interfaces
Logical interface
RS 485A/B (pin 5, pin 3);
power supply (pin 1, pin 6); DC return (pin 7);
according to AISG
HEX coded commands
based on HDLC protocol, according to AISG 1.1
2)
Adjustment time (full range)
40 sec (typically, depending on antenna type)
Adjustment cycles
> 50,000
Temperature range
–40 °C … +60 °C
Protection class
IP 24
Housing material
Profile: Aluminium coated; cover: Zinc diecast coated;
varnished housing (RAL 7035, lightgrey)
Weight
525 g (without daisy chain termination)
Packing size
Dimensions (H x W x D)
245 mm x 93 mm x 102 mm
197.8 mm x 59.5 mm x 49.5 mm (with daisy chain termination)
The Tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). The connector
should be tightened by hand only!
2)
FW-upgrade to 3GPP / AISG 2.0 possible
Daisy chain in
Standards
EN 60950-1 (Safety)
EN 55022 (Emission)
EN 55024 (Immunity)
ETS 300019-1-4 (Environmental)
UL 60950-1; 1st edition
1)
Certification:
CE, UL
Scope of supply:
Remote Control Unit
Detachable daisy chain termination
Mounting Paste
Bottom side of RCU
Compact size.
Suitable for daisy chain and splitter solutions.
Easy attachment without dismantling of antennas.
Suitable for operation under outdoor conditions.
Daisy chain termination
14.5
RET
Features:
Daisy chain out
191
Remote Control Unit (RCU)
Remote Control Unit (RCU) for Kathrein base station antennas with adjustable electrical downtilt and appropriate mechanical interface.
●
●
●
●
Compliant to 3GPP/AISG 2.0 and AISG 1.1
Compact size
Detacheable Daisy Chain termination
Suitable for operation under outdoor conditions
860 10118
Type No.
Input voltage range
Pin 1, Pin 6: 10 ... 30 V
Power consumption
< 1 W (stand by); < 8.5 W (motor activated)
Connectors 1)
2 x 8 pin connector according to IEC 60130-9; according to AISG
Daisy chain in: male; Daisy chain out: female
Hardware interfaces
RS 485A/B (pin 5, pin 3);
power supply (pin 1, pin 6); DC return (pin 7);
according to AISG
Logical interface 2)
Command set acc. to 3GPP/AISG2.0 or AISG1.1
Logical interface ex factory 3)
Acc. to 3GPP/AISG2.0
Adjustment time (full range)
40 sec (typically, depending on antenna type)
Adjustment cycles
> 50,000
Temperature range
–40 °C … +60 °C
Protection class
IP 24
Housing material
Profile: Aluminium coated; cover: Zinc diecast coated;
varnished housing (RAL 7035, lightgrey)
Weight
525 g (1.16 lbs) (without daisy chain termination)
Packing size
Dimensions (H x W x D)
245 x 93 x 102 mm, (9.6 x 3.6 x 4 inches)
194 x 59.5 x 49.5 mm, (7.6 x 2.3 x 1.9 inches) (with daisy chain termination)
1)
The Tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). The connector
should be tightened by hand only!
2)
The protocol of the logical interface can be switched from 3GPP/AISG2.0 to AISG1.1 and vice versa
with a vendor specific commond. Please contact Kathrein for further informations.
3)
Please note:
Ex factory, the communication protocol of the RCU (type-no. 860 10118) is preset to 3GPP/ AISG 2.0!
Therefore, start-up operation is only possible in a RET-system supporting 3GPP/ AISG 2.0. If the
RET-system supports AISG 1.1, the RCU must be set to AISG 1.1 before installation (i.e. with Kathrein
PCA 860 10046). Please contact Kathrein for further information.
EN 60950-1 (Safety)
EN 55022 (Emission)
EN 55024 (Immunity)
ETS 300019-1-4 (Environmental)
UL 60950-1; 1st edition
Certification:
CE, UL, FCC15.107 class B
Scope of supply:
Remote Control Unit
Detachable daisy chain termination
Assembly paste
31.3 mm
(1.23″)
134 mm (5.3″)
49.5 mm (1.95″)
9 mm
(0.35″)
192
33.2 mm
(1.27″)
59.5 mm (2.34″)
14.5 mm (0.57″)
∅ 18 mm
(0.7″)
RET
28.7 mm
(1.1″)
4.5 mm
(0.18″)
Bottom view of RCU
28.5 mm
(1.1″)
Standards
Daisy chain Daisy chain
in
out
(male)
(female)
Daisy chain termination
Central Control Unit (CCU)
For Remote Electrical Tilt (RET) and
Tower Mounted Amplifier (TMA) Control
For indoor use
Central Control Unit
860 10006
Type No.
Connectors1) to RCU
Power supply from BTS
860 10026
3 x 8 pin connector acc. to IEC 60130-9, female, acc. to AISG
DC: –48 V / max. 1.7 A
AC: 100 … 240 V / 50 ... 60 Hz /
max. 1.6 A
Power supply to RCU
DC: –48 V / max. 1.7 A
3 x +29 V DC / max. 1.7 A (in total)
3 x +13 V DC / max. 3.8 A (in total)
Total output power
Max. 50 W
Interface to RCU and TMA
RS 485 / power supply
Protocol to RCU and TMA
HDLC hex-coded command set, acc. to AISG
Interface to BTS
Ethernet (10 Base-T) and RS 232
Protocols to BTS
TCP/IP, PPP, HTTP/HTML, UDP, DHCP, FTP, SNMP, ICMP/PING
Alarm interface to BTS
8 x open collector output, user programmable
Max. number of RCU’s
and/or TMA’s
Up to 27 RCU’s in daisy chain and up to 6 DTMA’s;
depending on cable configuration and max. power
Max. length of control cable
200 m (9 RCU’s in daisy chain configuration)
Temperature range
–25 °C ... +55 °C ambient temperature
Packing size
597 mm x 367 mm x 148 mm
Dimensions (h / w / d)
19" 1 HU* (43.6 mm / 483 mm / 250 mm)
* HU = Height Unit
1)
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand tightened’).
The connector should be tightened by hand only.
Standards:
EN 60950-1
EN 55022
EN 55024
UL 60950-1, 1 st edition
Certifications:
CE, FCC part 15 class B; UL
Scope of supply:
CCU
RET Manual
DC Cable
AC Power Cords of USA, UK and Germany
Ethernet cable, crossed
CCU Interfaces
Examples of CCU – RCU connections
3 x RS 485
3 x 13 V / 3 x 29 V
RET
GND
AC: 100 – 240 V
max. 1.6 A
(only 860 10006)
Alarm
Interface
DC: –48 V
max. 1.7 A
Network
Interfaces
8 x Open
Collector
Ethernet
RS 232
CCU
Central Control Unit
193
Central Control Unit with Layer-one Converter
For Remote Electrical Tilt (RET) and
Tower Mounted Amplifier (TMA) Control
For indoor use
The Central Control Unit with integrated Layer-one Converter (CCU-LOC) combines the features of the
standard Kathrein CCU (86010026) with the functionality of an additional RF-modem for layer-one conversion
according to AISG speci?cation. The CCU provides on its outputs a DC voltage with an OOK-modulated carrier signal at 2.176 MHz for controlling all connected AISG devices via feeder cables. In order to feed-in the
output signal (DC voltage / carrier-signal) into the feeder cable, a passive Bias-T with appropriate lightning
protection is required (Kathrein 78210429). The measures taken to protect against static discharge and lightning ensure a high level of reliability and operational safety.
• AISG 1.1 compliant
• 13 VDC or 29 VDC output voltage - switchable with external jumper
• LED signalling for output power and alarming
CCU with Layer-one Converter
Type No.
86010068
RET-Interface
3 x Coaxial Interface
13 VDC or 29 VDC; OOK modulated carrier at 2.176 MHz
Connector of RET-Interface
3 x SMB; female acc. IEC 169-10
Power supply from BTS
DC: -48V / max. 1.7A
Power supply to RET
3 x +13 VDC (3.8 A in total) or
3 x +29 VDC (1.7 A in total)
switchable with external jumper
Over current protection per SMB output:
1.8 A / 13 VDC
1.0 A / 29 VDC
Total output power
max. 50 W (in total)
Protocol to RET
HDLC command set, conform to AISG
Interface to BTS
PPP; IP; TCP; UDP; ICMP/PING; HTTP/HTML; DHCP; FTP; SNMP
Alarm Interface to BTS
LED signalling
8 x open collector output, user programmable
1 x green POWER ON
1 x red ALARM
SMB-connectors: 3 x green POWER ON
3 x red ALARM
Max. number of TMA‘s and
RCU‘s
max. 1 x DTMA and 9 x RCU per output (Kathrein devices)
depending on system con?guration
Temperature range
-25 °C ... +55 °C ambient temperature
Weight
3.7 kg
Packing size (h x w x d)
597 mm x 367 mm x 148 mm
Dimensions (h x w x d)
19“ 1 HU* (43.6 mm x 483 mm x 250 mm)
Standards
EN 60950-1 (Safety)
EN 55022 (Emmission)
EN 55024 (Immunity)
CE
Scope of supply:
CCU-LOC
Manual
DC-cable
RET
Certi?cation:
194
Central Control Unit with Layer-one Converter
For Remote Electrical Tilt (RET) and
Tower Mounted Amplifier (TMA) Control
Block diagram:
OOK
CCU LOC
Please note:
In order to achieve spurious emission requirements acc. to the AISG and 3GPP specifications, the CCU must
be operated with a suitable Bias-Tee (Kathrein 78210429). The Bias-Tee must provide a minimum attenuation
of 55 dB from 400MHz to 2170MHz and 30 dB from 2,17 GHz to 12,75 GHz between the DC-port and both
RF-ports.
195
RET
Applications:
Central Control Unit (CCU)
For Remote Electrical Tilt (RET) and
Tower Mounted Amplifier (TMA) Control
for outdoor use
Central Control Unit, outdoor
860 10113
Type No.
Connectors to RCU/Splitter
1 x 8 pin connector according IEC 60130-9, female, conform to AISG
Power supply from BTS
DC: –48 V / max. 1.7 A
Power supply to RCU
+29 V DC / max. 1.7 A
+13 V DC / max. 3.8 A
Total output power
Max. 50 W
Interface to RCU and TMA
RS 485 / power supply, conform to AISG
Protocol to RCU and TMA
HDLC hex-coded command set, conform to AISG
Interface to BTS
RJ 45, 10 Base-T, Ethernet 802.3
Protocols to BTS
TCP/IP, UDP, HTTP/HTML, DHCP, FTP, ICMP/PING, SNMP
Alarm Interface
1 x open collector output
Lightning Protection
10/350 µs, 3.5 kA for AISG interface 1)
8/20 µs, 2.5 kA Ethernet- , DC- and Alarm Interface
Max. number of RCU’s
and/or TMA’s
Up to 27 RCU’s in daisy chain und up to 6 DTMA’s;
depending on cable configuration and max. power 2)
Max. length of control cable
200 m (9 RCU’s in daisy chain configuration)
2)
Material of housing
Covers: Aluminium, varnished (lightgrey, RAL 7035)
Profile: Glass-fibre reinforced plastic (lightgrey)
Temperature range
–40 °C ... +55 °C ambient temperature
Protection class
Mounting
IP 65
4)
Wall and mast mounting (with additional clamps)
Weight
2)
3)
4)
Cable feedthrough with
gasket at the bottom side.
4.5 kg
Dimensions (h x w x d)
1)
3)
328 mm x 270 mm x 131 mm
Please note: In order to achieve lightning protection acc. to IEC 61643-1/-3 (10/350µs), please install
the Kathrein Lightning Protection Device (type-no. 860 10030). For additional information about lightning
protection of the CCU, we kindly refer to the RET Installation Manual.
Interfaces at the internal
connector panel.
Please refer to the RET Installation Manual for detailed information.
Please note: Appropriate cables must be used (see RET Installation Manual for additional information)
Please note: Cable feedthrough must point downward!
The cable installation must provide adequate strain relief!
The CCU should not be installed at locations with hazardous risks for the installation team!
Please follow the instructions in the RET Installation Manual.
Standards:
EN 60950-1 (Safety)
EN 55022 (Emission)
EN 55024 (Immunity)
ETS 300019-1-4 (Environmental)
Certifications:
CE
Scope of supply: Central Control Unit, outdoor
Connectors for Power Supply and
Alarm interface Installation manual
LED signalling
AISG
Ethernet
Alarm
DC – 48 V
RET
GND
Block diagram: CCU – outdoor
to RET / Antenna
to BTS
196
Portable Control Adapter (PCA)
For Remote Control Unit (RCU)
Portable Control Adapter
860 10046
Type No.
Connector* to RCU
1 x 8-pin connector according to IEC 60130-9, female,
conforming to AISG
Input voltage of PCA
24 V DC
Power supply to RCU/TMA
13.5 V DC / max. 2 A
24 V DC / max. 2.5 A
Interface to RCU
RS 485 / power supply
Protocol to RCU
HDLC hex-coded command set, conforming to AISG
Interface to PC
USB 1.1/2.0
Max. number of RCU’s
27 pcs., depending on system configuration and length of control cable
Max. length of control cable
200 m / 9 RCU’s (in daisy chain configuration)
150 m / 6 RCU’s (in splitter configuration)
Weight
535 g (incl. external power adapter)
Temperature range
0 °C ... +55 °C ambient temperature
Height x width x depth
40 mm x 95 mm x 160 mm
External power supply**
Input: 90 – 264 V AC, 47 – 63 Hz
24 V DC / 3.0 A
*
Tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’).
The connector should be tightened by hand only!
** If powered via AISG-interface, no external power supply is required.
Certificate:
CE
FCC part 15 class B
UL (for external power adapter)
Standards:
EN 60950-1
EN 55022
EN 55024
Scope of supply:
Windows 2000; Windows XP
PCA
External power supply (24 V DC / 70 W)
USB cable
AC power cable
CD-ROM with PCA software, drivers and manual
Installation guide
Transport case
RET
System requirements
for PCA Software:
197
Connecting Cable
For Remote Electrical Tilt (RET) System
For indoor and outdoor use
RET Cable for power supply and control
860 10007 …
Type No.
Connectors
2 x 8 pin connector
according IEC 60130-9, female/male
Tightening torque for fixing
the connectors
0.5 – 1 Nm
(The connector should be tightened
by hand only)
Construction
Screen
1x twisted pair 100 Ω/1 MHz
2x power supply, 1x ground
AWM style 20317 I/II A/B + 20549 + 20233
Rated current
4 A (power supply)
(at 50 °C air temperature)
Temperature range
–40 °C to +80 °C, (fixed position)
Protection class
IP 67 (connected)
Cable diameter
8 mm
Flammability
VL 1581 VW-1
CSA
FT 1
Colour
Black, similar to RAL 9005,
grey, similar to RAL 7004
Minimum bending radius:
One time 60 mm,
several times 120 mm.
The male and female connectors of all Kathrein RET products are compatible
components which are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
Control Cable
Black colored
Type No.
0.5 m
1m
2m
3m
5m
10 m
20 m
25 m
40 m
50 m
60 m
80 m
100 m
860 10054
860 10007
860 10008
860 10029
860 10009
860 10010
860 10032
860 10011
860 10012
860 10033
860 10013
860 10014
860 10015
RET
Length
198
Grey colored
Type No.
860
860
860
860
860
860
860
860
860
860
860
860
860
10055
10056
10057
10058
10059
10060
10071
10072
10073
10074
10075
10076
10077
Female
7
8
Male
6
6
3
1
5
4
2
8
7
1
3
4
5
2
PIN assignment according AISG:
1 +13 V DC (+12 V DC nominal)
2 not connected
3 RS485 B
4 not connected
5 RS485 A
6 +29 V DC (+24 V DC nominal)
7 DC Return
8 not connected
SMB Control Cable
For Remote Electrical Tilt (RET) System
For indoor use
Coax cable (RG58) assembled with SMB connectors. The DC Control Cable is used
to connect the CCU with Layer One Converter (type no. 860 10068) to the Bias Tee with
SMB interface (type no. 782 10429).
Type No.
860 10078 / 860 10079 / 860 10084 / 860 10090
Connectors
2 x SMB-Angle Jack; gold plated
Cable
RG58C/U
Temperature range
–40 °C to +70 °C, (fixed position)
Cable diameter
4.95 mm ±0.1 mm
Colour of cable
Black, similar to RAL 9005
Minimum bending radius: One time
25 mm
several times 50 mm
860 10079
Control Cable
860
860
860
860
10078
10084
10079
10090
Description
SMB
SMB
SMB
SMB
Control
Control
Control
Control
Cable
Cable
Cable
Cable
Length
2
3
5
10
m
m
m
m
RET
Type No.
199
DC-Power and Signal Splitter
For Remote Electrical Tilt (RET)
Indoor and Outdoor Use
AISG compliant device for splitting of DC-power and control
signals from one input to three outputs.
3-way-Splitter for RET
860 10002
Type No.
Connectors 1)
4 x 8 pin connector
according IEC 60130-9, 1 x male, 3 x female
Rated current (power supply)
3 A (at 50 °C)
Max. voltage
60 V
Protection class
IP 65
Weight
250 g
Packing size
114 mm x 117 mm x 117 mm
Height/width/depth
1)
91 mm / 103 mm / 72 mm
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘handtightened’). The connector should be thightened by hand only!
Material:
Connector plate: Aluminum.
Cap: Plastic.
Mounting:
Mast mounting (50 – 145 mm diameter) by clamp.
Wall mounting by screws (not supplied).
Note:
Connectors must be situated at the bottom.
No inverted mounting possible.
Scope of supply:
3-way Splitter
Clamp (Art.-No. 1311847)
2 pins
(power supply, max. 3 A)
6 pins
(max. 0.1 A)
RET
Input
Output 1
Output 2
Output 3
Clamp, Art. No. 1311847
200
Lightning Protection Device (LPD)
For Remote Electrical Tilt (RET)
Indoor and Outdoor Use
The device is designed for lightning protection of control cables
carrying partial lightning currents up to 25 kA (shield) and
2.5 kA (inner conductor), according IEC 61643-1, IEC 61312-3.
Each pin is protected individually.
Lightning Protection Device for RET
860 10030
Type No.
Connectors
1)
SPD-Type
Max. impuls current
2 x 8 pin connector
according IEC 60130-9,
input: male, output: female
8 x bipolar gas tube
25 kA (housing, shield) (10/350 µs)
inner conductors: 2.5 kA/pin (10/350 µs)
Max. dynamic overvoltage
at spark gap (1 kV/µs)
< 700 V
Static overvoltage (100 V/s)
< 100 V
Grounding
Max. operation current
Via mounting plate / clamps at metallic surfaces
or via separate cable,
min. cross-section 5 mm2 Cu (screw M6)
4 A at 50 °C
Max. operation voltage
60 V
Weight
250 g
Packing size
Height/width/depth
114 mm x 117 mm x 117 mm
91 mm / 103 mm / 72 mm
The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘handtightened’). The connector should be thightened by hand only!
1)
Material:
Connector plate: Aluminum.
Cap: Plastic.
Mounting:
Mast mounting (50 – 145 mm diameter) by clamp.
Wall mounting by screws (not supplied).
Note:
No decoupling elements are integrated. The
coordination with additional LPD’s (device
input) should be checked according to IEC
61312.
Grounding of the device via the mounting
plate at metallic surfaces or via additional
grounding cable (not included in the delivery
extend).
Connectors must be situated at the bottom.
No inverted mounting possible.
Important: A control cable with a minimum
length of 2 meters is required between
Lightning Protection Device and Central
Control Unit at
the BTS to achieve the required decoupling.
3-way Splitter
Clamp (Art.-No. 1311847)
RET
Scope of supply:
Clamp, Art. No. 1311847
201
Earthing Clamp
For Power Supply and Control Cable
For Remote Control Unit (RCU)
The clamp is designed for lightning protection of control cables
according to EN 50164-1
Earthing clamp for RCU power supply and signal cable
860 10031
Type No.
Max. lightning current
20 kA (pulse 10/350 µsec)
Contact resistance
< 3 mΩ
Protection class
IP 68
Grounding
Via stranded grounding wire,
16 mm2, length 0.5 m,
one end terminated with cable eye (10 mm lug)
Packing size
Plastic bag: 210 mm x 210 mm
Weight
160 g
Material:
Body: Stainless steel with vulcanized EthylenePropylene-Caoutchouc
Screw: Stainless steel
Skin: Copper alloy
Grounding wire: Copper
Please note:
The earthing clamp is suitable only for the
Kathrein Power Supply and Signal Cables,
Type No. 860 10007 to 860 10015, 860 10029,
860 10032, 860 10033, 860 10054 to 860 10060
or shielded cables with
– shield diameter 6.1 mm
– jacket diameter 7.8 mm ±0.3 mm
The kit contains:
1 x Grounding kit body incl. Butyl sealing rope
covered with paper
1 x Screw M6 DIN 912
1 x Grounding wire
Mounting instructions:
RET
This instruction is written for qualified and experienced personnel. Please
read it carefully before starting work. Any liability or responsibility for the result
of improper or unsafe installation is disclaimed!
Attention !
Install grounding kit only where the cable
runs straight.
Fig. 1a Preassembled grounding kit.
Fig. 1b Clean the plastic jacket at the
desired grounding point and cut out a strip
of 15 mm with aid of a suitable stripping
tool.
202
Remove covering paper from Butyl sealing.
Wrap the grounding kit body around the
cable and align it.
Tighten the screw (> 6 Nm)
DTMA-UMTS-12-AISG
Fullband Double Dual Duplex Tower Mounted Amplifier
(Masthead Amplifier)
• Double unit for easy use with XPol antennas
• Kathrein redundancy amplifier design for improved system reliability
• By-pass mode to ensure cell operation in case of DC power down
• Built-in lightning protection
• Compact size
• Suitable for antenna RET control according to AISG standard
• DTMA DC supply and AISG feed via Node B0 port for both TMAs
Ant 1
Ant 0
RET = Remote Electrical Tilt
AISG = Antenna Interface Standards Group
Technical Data
Type No.
782 10147
DTMA-UMTS-12-AISG (12 dB gain)
Intermodulation products in Rx band
Return loss
Rx Characteristics
Frequency range
Bandwidth
Loss in by-pass mode
Gain ripple
Return loss
2110 – 2170 MHz
60 MHz
Typically 0.3 dB
< ±0.2 dB
< 100 W (+50 dBm) CW
< 1.6 kW (+62 dBm) Peak
< –117 dBm (2 Tx carriers at +43 dBm)
> 18 dB
12 ±1.0 dB
12 ±0.5 dB
Typically 1.4 dB
> 15 dBm
> 25 dBm
Environmental Characteristics
Operating temperature range
IP rating
MTBF
EMC
–40 … +65 °C
IP67 *
> 1 000 000 hours (per TMA)
ETS 300 342-3
Alarm management
Modem Characteristics
Mechanical Characteristics
Material
Connectors
RF
AISG Connector
(Compliance AISG 1.1)
Mounting
Weight
Packing size
Dimensions (w x h x d)
Node B0
AISG and
DC-Port
1920 – 1980 MHz
60 MHz
< 2.6 dB (DC OFF)
< ±0.3 dB
> 18 dB (DC ON)
> 12 dB (DC OFF)
Gain
–40 … +65 °C
+22 … +28 °C
Noise figure
Output 1-dB compression point
3rd order intercept point (OIP3)
DC and Alarm Characteristics
DC supply without RET
Node B1
Through Node BO Port only
+12 V nominal (9 – 15 V, minus grounded)
Typically 150 mA per TMA
According to AISG standard 1.1
According to AISG standard 1.1
(Data rate: 9.6 kB)
DTMA
Node B0
Node B1
Aluminium housing
7-16 female
8-pin female, IEC 60130-9*
(Pin 1: +12 V DC nominal, pin 3: RS485B, pin 5: RS485A,
pin 7: DC return; other pins: Not connected)
Wall mounting: With 4 screws (max. 8 mm diameter)
Mast mounting: With additional clamp set
5 kg
262 mm x 502 mm x 214 mm
166 mm x 262 mm x 77.5 mm
(without connectors, without mounting brackets)
Ant 0
Ant 1
RET
Tx Characteristics
Frequency range
Bandwidth
Insertion loss
Ripple
Input power
DTMA
Node B0
Node B1
203
DTMA-UMTS-24-AISG
Fullband Double Dual Duplex Tower Mounted Amplifier
(Masthead Amplifier)
• Double unit for easy use with XPol antennas
• Kathrein redundancy amplifier design for improved system reliability
• By-pass mode to ensure cell operation in case of DC power down
• Built-in lightning protection
• Compact size
• Suitable for antenna RET control according to AISG standard
• DTMA DC supply and AISG feed via Node B0 port for both TMAs
Ant 1
Ant 0
RET = Remote Electrical Tilt
AISG = Antenna Interface Standards Group
Technical Data
Type No.
782 10148
DTMA-UMTS-24-AISG (24 dB gain)
Tx Characteristics
Frequency range
Bandwidth
Insertion loss
Ripple
Input power
Intermodulation products in Rx band
Return loss
Rx Characteristics
Frequency range
Bandwidth
Loss in by-pass mode
Gain ripple
Return loss
24 ±1.0 dB
24 ±0.5 dB
Typically 1.4 dB
> 20 dBm
> 29 dBm
Environmental Characteristics
Operating temperature range
IP rating
MTBF
EMC
–40 … +65 °C
IP67 *
> 1 000 000 hours (per TMA)
ETS 300 342-3
Mechanical Characteristics
Material
Connectors
RF
AISG Connector
(Compliance AISG 1.1)
Mounting
Weight
Packing size
Dimensions (w x h x d)
204
Node B0
AISG and
DC-Port
Node B1
1920 – 1980 MHz
60 MHz
Typically 2.4 dB (DC OFF)
< ±0.3 dB
> 18 dB (DC ON)
> 12 dB (DC OFF)
Gain
–40 … +65 °C
+22 … +28 °C
Noise figure
Output 1-dB compression point
3rd order intercept point (OIP3)
DC and Alarm Characteristics
DC supply
without RET
Alarm management
Modem Characteristics
RET
2110 – 2170 MHz
60 MHz
Typically 0.3 dB
< ±0.2 dB
< 100 W (+50 dBm) CW
< 1.6 kW (+62 dBm) Peak
< –117 dBm (2 Tx carriers at +43 dBm)
> 18 dB
Through Node BO Port only
+12 V nominal (9 – 15V, minus grounded)
Typically 250 mA per TMA
According to AISG standard 1.1
According to AISG standard 1.1
(Data rate: 9.6 kB)
Node B1
Node B0
Aluminium housing
7-16 female
8-pin female, IEC 60130-9*
(Pin 1: +12 V DC nominal, pin 3: RS485B, pin 5: RS485A,
pin 7: DC return; other pins: Not connected)
Wall mounting: With 4 screws (max. 8 mm diameter)
Mast mounting: With additional clamp set
5 kg
262 mm x 502 mm x 214 mm
166 mm x 262 mm x 77.5 mm
(without connectors, without mounting brackets)
Ant 0
Ant 1
DTMA
Node B0
Node B1
Smart Bias Tee
800 – 2170 MHz
The Smart Bias Tee combines the performance of a
standard Bias Tee (e.g. type 793 304) with the function
of an additional modem (AISG standard) in order to
provide either DC voltage as well as remote control signals via an RF feeder cable to a TMA or RCU.
The Smart Bias Tee provides low RF signal insertion
loss from port 1 to port 2 and vice versa.The measures
taken to protect against static discharge and lightning
ensure a high level of reliability and operational safety.
•
•
•
•
Port 1
Antenna
782 10253, 782 10453: 12 V version for use near the
BTS, in order to feed-in DC voltage and RCU control
signals into a feeder cable
Port 2
782 10254, 782 10454: 12 V version for use near the Feeder
antenna, in order to control an RCU (only required if Port DC/RCU
no TMA is in use)
782 10255, 782 10455: 24 V version for use near the
BTS, in order to feed-in DC voltage and RCU control
signals into a feeder cable
782 10256, 78210456: 24 V version for use near the
antenna, in order to control an RCU (only required if
no TMA is in use)
Port 2
Feeder
Port 1
Antenna
Port DC/RCU
782 10254
782 10256
782 10454
782 10456
Port 1
BTS
Abbreviations:
RCU = Remote Control Unit for remote electrical
control of antenna tilt
Port 2
Feeder
BTS = Base Transceiver Station
TMA = Tower Mounted Amplifier
Port DC/RCU
AISG= Antenna Interface Standards Group (version 1.1)
Port 1 = Port for BTS or for Antenna
Port 2 = Port for Feeder Cable
Port DC/RCU = Port for DC voltage and remote control
unit signals
Port 2
Feeder
Port 1
BTS
Port DC/RCU
782 10253
782 10255
782 10453
782 10455
Technical Data
Port 1: 7-16 male
Port 2: 7-16 female
Type No.
Port 1: 7-16 female
Port 2: 7-16 male
Frequency range
Insertion loss
Port 1 ↔ Port 2
Isolation for DC and RCU signals
Port 1 ↔ Port 2
Port 1 ↔ Port DC/RCU
Port 2 ↔ Port DC/RCU
VSWR
Impedance
Input power
Port 1 or port 2
Port DC/RCU
Power consumption
Lightning protection
Intermodulation products
Temperature range
Modem carrier frequency
Application
Weight
Packing size
Dimensions (w x h x d)
782 10253
782 10254
782 10255
782 10256
12 V / BTS
12 V / Antenna
24 V / BTS
24 V / Antenna
BTS
Feeder
Antenna
Feeder
BTS
Feeder
Antenna
Feeder
782 10453
782 10454
782 10455
782 10456
12 V / BTS
12 V / Antenna
24 V / BTS
24 V / Antenna
BTS
Feeder
Antenna
Feeder
BTS
Feeder
Antenna
Feeder
800 – 2170 MHz
< 0.1 dB (800 – 2170 MHz)
> 70 dB
> 70 dB
> 0 dB
< 1.1 (800 – 2170 MHz)
50 Ω
< 750 W (800 – 2170 MHz)
< 2.5 A / +8 … +14 VDC
< 750 W (800 – 2170 MHz)
< 2.5 A / +8 … +30 VDC
Typically 0.6 W
3 kA, 10/350 µs pulse
< –160 dBc (3rd order; with 2 x 20 W)
–40 ... +60 °C
2.176 MHz
Indoor or outdoor (IP67)
1.3 kg
167 mm x 102 mm x 86 mm
108.7 mm x 76 mm x 42.8 mm (including connectors)
RET
Type No.
205
Bias Tee
800 – 2170 MHz
The Bias Tee is suitable to feed DC voltage and AISG control signals into the
feeder cable in order to provide operating voltage and control signals via the
RF feeder cable to the TMA or RCU.
•
•
793 304
Bias Tee
Bias Tee
800–2170
MHz
800–2170 MHz
Antenna
BTS
Antenna BTS
16
35.4
•
The Bias Tee provides low RF signal insertion loss from the BTS to the
antenna port and vice versa.
The DC voltage and AISG control signal (2.176 MHz) is fed from the DC port
to the antenna port while providing a high level of DC isolation from the DC to
the BTS port and from the antenna to the BTS port.
The measures taken in conjunction with the CCU-LOC to protect against
static discharge and lightning ensure a high level of reliability and operational
safety.
DC
DC/AISG
DC
28.5
47
88
6.5
6.5
Application Example
RET
Technical Data
Type No.
782 10429
Frequency range
Insertion loss
BTS ↔ Antenna
Isolation
BTS ↔ Antenna
BTS ↔ DC/AISG
VSWR
Impedance
Input power
BTS
DC/AISG
800 – 2170 MHz
Lightning protection
Intermodulation products
Temperature range
Connectors
Port 1 BTS
Port 2 Antenna
Port DC/AISG
Application
Weight
Packing size
Dimensions (w x h x d)
206
Port 2
Feeder
< 0.1 dB (800 – 2170 MHz)
> 70 dB (DC)
> 70 dB (DC)
< 1.1 (800 – 2170 MHz)
50 Ω
< 250 W (800 – 2170 MHz)
< 1.8 A / 13 VDC
< 0.8 A / 29 VDC
3 kA, 10/350 µs pulse
< –160 dBc (3rd order; with 2 x 20 W)
–40 ... +70 °C
7-16 male
7-16 female
SMB male
Indoor
0.6 kg
145 mm x 145 mm x 50 mm
88 mm x 47 mm x 35.4 mm
(including connectors and earthing screw
of 6 mm diameter)
Port 1
BTS
Port DC/AISG
Antenna System Manager (ASM)
General Information
KATHREIN provides the Antenna System Manager
(ASM) for a convenient way of network and alarm
management of the Kathrein RET system. It gathers the access to the functionality of all CCUs into
one single application.
The ASM presents an invaluable tool for detecting
faults, network changes and events in real-time. It
is an optimized solution for controlling up to thousands of RET systems. It is based on the platformindependent JavaTM technology and the popular
SNMP protocol.
General features and capabilities:
➛ Management of up to 10.000 CCUs and connected AISG devices (RCU, TMA)
➛ Client Server Architecture
➛ Platform independence (Win 2k/XP and SuSE
Linux 9.0 or higher)
➛ Role-based user management with customizable
access rights for each user account
➛ Freely configurable views on controlled systems
➛ Scripting functionality (CCI, “Customized Control
Interface”, based on XML) for performing bulk
operations in the system.
➛ The CCI scripting language includes for example
operations like setting or validating RCU tilt
values, performing software updates or
registering RET systems in the ASM for a
complete network.
➛ Alarm management of CCUs, RCUs and TMAs,
report / export functionality
➛ Open interfaces for OMC and/or Optimizer
Software integration
➛ Report generation in XML and PDF format
➛ Database export / import capability
➛ Automatic task scheduling to backup the database or export device information
➛ Snapshot Generation of certain scenarios, like
for example rush hours, sport events, ..., and
(re-)import of those scenarios, if required
➛ Event logging and possibility to filter the events
in order to browse them or export them to a file.
207
RET
The ASM is designed in a Client Server
Architecture. The server holds the database that
contains all network parameters including the configuration and the current status of the RET systems.
The clients connect to the server to watch the status of the system or to make configuration changes.
Antenna System Manager (ASM)
Editions and Support
ASM – Editions and Support
Edition
Short Description
ASM PRO
Professional Client Server Edition
Management of up to 10.000 CCUs
ASM PRO Demo
30 days trial version of the ASM PRO
limitation of max. 5 CCUs
ASM One Year Support
– 1 year free software updates
– Training
– Technical support
For more detailed information on the ASM software please contact
RET
[email protected]
208
Summary – Electrical Accessories
Splitters
Type
Type No.
2-way-Splitter 800/900
2-way-Splitter 800/900
2-way-Splitter
2-way-Splitter
3-way-Splitter
3-way-Splitter
4-way-Splitter
4-way-Splitter
K 63 20 62 1
K 63 20 62 7
800–2200
800–2200
800–2200
800–2200
800–2200
800–2200
2-way-Splitter 800–2500
3-way-Splitter 800–2500
4-way-Splitter 800–2500
737
737
737
737
737
737
303
304
305
306
307
308
Frequency
range
Remark
Max.
power
Connector Page
female
790 – 960 MHz Indoor/Outdoor 500 W
790 – 960 MHz Indoor/Outdoor 1000 W
N
7-16
210
210
800
800
800
800
800
800
N
7-16
N
7-16
N
7-16
211
211
211
211
211
211
N
N
N
212
212
212
–
–
–
–
–
–
2200
2200
2200
2200
2200
2200
MHz
MHz
MHz
MHz
MHz
MHz
Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor
200
700
200
700
200
700
W
W
W
W
W
W
860 10017
860 10018
860 10019
800 – 2500 MHz
800 – 2500 MHz
800 – 2500 MHz
Indoor
Indoor
Indoor
100 W
100 W
100 W
Type
Type No.
Frequency
range
Remark
Max.
power
2-way-Tapper 800–2500 7.0/1.0 dB
2-way-Tapper 800–2500 10.4/0.4 dB
2-way-Tapper 800–2500 15.1/0.1 dB
860 10020
860 10021
860 10022
800 – 2500 MHz
800 – 2500 MHz
800 – 2500 MHz
Indoor
Indoor
Indoor
100 W
100 W
100 W
N
N
N
213
213
213
500 W
500 W
500 W
7-16
7-16
7-16
214
214
214
Tappers
2-way-Tapper 800–2200 7.0/1.0 dB K 63 23 60 67
2-way-Tapper 800–2200 10.4/0.4 dB K 63 23 61 07
2-way-Tapper 800–2200 15.1/0.1 dB K 63 23 61 57
800 – 2200 MHz Indoor/Outdoor
800 – 2200 MHz Indoor/Outdoor
800 – 2200 MHz Indoor/Outdoor
Connector Page
female
Continuously adjustable ratio
2-way-Tapper 824–960/1710–2170 K 63 23 60 01 824 – 960 MHz
5.0–15.0dB
1710 – 2170 MHz
Indoor
100 W
N
215
2-way-Tapper 870–960/1710–2500
5.0–15.0dB
Indoor
100 W
N
215
Filter products summary
– Combiners
– Duplexers
– DTMAs, Bias Tees
– 3-dB Couplers, DC Stop, Filters
870 – 960 MHz
1710 – 2500 MHz
ation
inform e
d
e
l
i
a
gu
et
For d the catalo lters,
z
see
H Fi
500 M mplifiers
2
–
0
9
A
s”
“7
iners,
cation
Comb Communi
obile
for M
216
217
218
219
Antenna Measurement Tools (from Schomandl)
– Fast-Antenna-Tester FAT 2700
– WLAN Power Meter (VSWR)
220
Power Meter
– WLAN Power Meter (Power)
– Broadcast RF Power Monitor
221
221
222
209
Electrical
Accessories
860 10023
Multi-band Low-loss Power Splitters
790 – 960
For indoor and outdoor use.
2-way-Splitter 790–960
K 63 20 62 1 K 63 20 62 7
Type No.
Frequency range
790 – 960 MHz
For connecting ... antennas
2
Insertion loss
< 0.05 dB
Impedance
50 Ω
VSWR
< 1.1
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power
500 W
1000 W
(at 50 °C ambient temperature)
Connector (female)
N
Weight
7-16
approx. 1.3 kg
Packing size
240 x 93 x 107 mm
Max. size
210 / 80 / 80 mm
Material:
Housing: Aluminum.
Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope
of supply: For pipe mast mounting use clamps
listed below (order separately).
DC capability:
DC transmission between all terminations
(suitable for remote power supply systems).
Input
K 63 20 62 7
Clamps (order separately)
Type No.
Splitters
736
736
736
736
736
801
802
803
804
805
Description
1
1
1
1
1
clamp
clamp
clamp
clamp
clamp
Remarks
Mast:
Mast:
Mast:
Mast:
Mast:
34
60
80
100
120
–
–
–
–
–
60
80
100
120
140
mm
mm
mm
mm
mm
diameter
diameter
diameter
diameter
diameter
736 805
210
Multi-band Low-loss Power Splitters
800 –2200
For indoor and outdoor use.
2-way-Splitter 800–2200
3-way-Splitter 800–2200
4-way-Splitter 800–2200
737 303 737 304 737 305 737 306 737 307 737 308
Type No.
Frequency range
800 – 2200 MHz
For connecting ... antennas
2
3
Insertion loss
4
< 0.05 dB
Impedance
50 Ω
VSWR
< 1.15
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power
(at 50 °C ambient temperature)
Connector (female)
200 W
700 W
200 W
700 W
200 W
700 W
N
7-16
N
7-16
N
7-16
Weight
approx. 1.5 kg
Packing size
310 x 93 x 107 mm
Max. size
294 / 82 / 82 mm
Material:
Housing: Aluminum.
Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the
scope of supply.
For pipe mast mounting use clamps listed
below (order separately).
DC capability:
DC transmission between all terminations
(suitable for remote power supply systems).
Input
737 308
Clamps (order separately)
736
736
736
736
736
801
802
803
804
805
Description
1
1
1
1
1
clamp
clamp
clamp
clamp
clamp
Remarks
Mast:
Mast:
Mast:
Mast:
Mast:
34
60
80
100
120
–
–
–
–
–
60
80
100
120
140
mm
mm
mm
mm
mm
diameter
diameter
diameter
diameter
diameter
Splitters
Type No.
736 805
211
Multi-band Low-loss Power Splitters
800 –2500
For indoor use.
2-way Splitter 800–2500
3-way Splitter 800–2500
4-way Splitter 800–2500
Type No.
860 10017 860 10018 860 10019
Frequency range
For connecting ... antennas
800 – 2500 MHz
2
3
Insertion loss
< 0.05 dB
Impedance
VSWR
50 Ω
< 1.25
< 1.25
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
4
< 1.3
< –150 dBc
100 W (at 50 °C ambient temperature)
Connector
N female
Weight
approx. 0.6 kg
Profile cross-section
25 x 25 mm
Packing size
242 x 110 x 95 mm
Max. size
204 / 63 / 41 mm
Material:
Housing: Aluminum.
Inner conductor: Brass.
DC capability:
DC transmission between all terminations
(suitbale for remote power supply systems).
Input
Splitters
860 10019
212
Multi-band Low-loss Power Tappers
800 –2500
For indoor use.
P1
2-way-Tapper 800–2500 7.0 /1.0dB
2-way-Tapper 800–2500 10.4/0.4dB
2-way-Tapper 800–2500 15.1/0.1dB
860 10020 860 10021 860 10022
Frequency range
Tap Loss
Input ↔ P1
Input ↔ P2
800 – 2500 MHz
– 1.0 dB
– 7.0 dB
– 0.4 dB
– 10.4 dB
For connecting ... antennas
P2
– 0.1 dB
– 15.1 dB
2
Insertion loss
< 0.05 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power
100 W (at 50 °C ambient temperature)
Connector
N female
Weight
approx. 0.5 kg
Profile cross-section
25 x 25 mm
Packing size
267 x 95 x 111 mm
Max. size
244 / 64 / 25 mm
Material:
Housing: Aluminum.
Inner conductor: Brass.
DC capability:
DC transmission only between input and port P1.
P2 is coupled capacitively.
Input
860 10020
Tappers
Type No.
213
Multi-band Low-loss Power Tappers
800 –2200
For indoor and outdoor use.
2-way-Tapper 800–2200 7.0 /1.0dB
2-way-Tapper 800–2200 10.4/0.4dB
2-way-Tapper 800–2200 15.1/0.1dB
P1
K 63 23 60 67 K 63 23 61 07 K 63 23 61 57
Type No.
Frequency range
800 – 2200 MHz
Tap Loss
Input ↔ P1
Input ↔ P2
– 1.0 dB
– 7.0 dB
– 0.4 dB
– 10.4 dB
For connecting ... antennas
– 0.1 dB
– 15.1 dB
2
Insertion loss
P2
< 0.05 dB
Impedance
50 Ω
VSWR
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< –150 dBc
Max. power
500 W (at 50 °C ambient temperature)
Connector
7-16 female
Weight
approx. 1.3 kg
Packing size
310 x 93 x 112 mm
Max. size
244 / 90 / 55 mm
Material:
Housing: Aluminum.
Inner conductor: Brass.
DC capability:
DC transmission only between input and port P1.
P2 is coupled capacitively.
Mounting:
Bracked for wall mounting included in the scope
of supply.
For pipe mast mounting use clamps listed below
(order separately).
Input
K 63 23 60 67
Clamps (order separately)
Type No.
736
736
736
736
736
801
802
803
804
805
Description
1
1
1
1
1
clamp
clamp
clamp
clamp
clamp
Remarks
Mast:
Mast:
Mast:
Mast:
Mast:
34
60
80
100
120
–
–
–
–
–
60
80
100
120
140
mm
mm
mm
mm
mm
diameter
diameter
diameter
diameter
diameter
Tappers
736 805
214
Multi-band
Low-loss Power Tapper
Continuously Adjustable
824 – 960
1710 –2500
5.0 – 15.0
5.0 – 15.0
For indoor use.
P1
K 63 23 60 01: 2-way-Tapper 824–960/1710–2170 5.0–15.0dB
860 10023: 2-way-Tapper 870–960/1710–2500 5.0–15.0dB
K 63 23 60 01 860 10023
Type No.
Frequency range
824 – 960 MHz and
1710 – 2170 MHz
Power ratio between outputs
(P2 – P1)
870 – 960 MHz and
1710 – 2500 MHz
P2
–5.0 dB to –15.0 dB
continuously adjustable
For connecting ... antennas
2
Insertion loss
< 0.1 dB
Impedance
50 Ω
VSWR
< 1.7
Intermodulation IM3
(2 x 43 dBm carrier)
Blocking unit
< –150 dBc
Max. power
100 W (at 50 °C ambient temperature)
Connector
N female
Weight
0.5 kg
Profile cross-section
25 x 25 mm
Packing size
249 x 111 x 40 mm
277 x 111 x 40 mm
Max. size
235 / 100 / 25 mm
263 / 100 / 25 mm
Material:
Housing: Aluminum.
Inner conductor: Brass.
Adjustment mechanism: ASA.
DC capability:
DC transmission only between input and port P1.
P2 is coupled capacitively.
Input
860 10023
Splitting table
Splitting ratio
P1 / P2
–5
–6
–7
–8
–9
– 10
– 11
– 12
– 13
– 14
– 15
3.2
4
5
6.3
8
10
12.6
15.8
20
25.1
31.6
Splitting attenuation
PInput – P1 [dB]
PInput – P2 [dB]
– 1.2
– 1.0
– 0.8
– 0.6
– 0.5
– 0.4
– 0.3
– 0.3
– 0.2
– 0.2
– 0.1
– 6.2
– 7.0
– 7.8
– 8.6
– 9.5
– 10.4
– 11.3
– 12.3
– 13.2
– 14.2
– 15.1
Tappers
P2 / P1 [dB]
215
Combiners
50 – 2500 MHz
Dual-band Combiner
793 532
793 533
Single Unit
Double Unit
806 – 960 / 1710 – 2170 MHz
806 – 960 / 1710 – 2170 MHz
782
782
782
782
10248
10249
10250
10251
Single Unit, DC By-pass
Single Unit, DC By-pass
Single Unit, built-in DC stop
Double Unit, built-in DC stop
806
806
806
806
793
793
782
782
423
424
10243
10244
Single Unit
Double Unit
Single Unit, built-in DC stop
Double Unit, built-in DC stop
1710
1710
1710
1710
782
782
782
782
10278
10279
10305
10306
Single Unit
Double Unit
Single Unit, built-in DC stop
Double Unit, built-in DC stop
806
806
806
806
–
–
–
–
960
960
960
960
/
/
/
/
1710
1710
1710
1710
–
–
–
–
2170
2170
2170
2170
MHz
MHz
MHz
MHz
–
–
–
–
1880
1880
1880
1880
/
/
/
/
1920
1920
1920
1920
–
–
–
–
2170
2170
2170
2170
MHz
MHz
MHz
MHz
–
–
–
–
1880
1880
1880
1880
/
/
/
/
1920
1920
1920
1920
–
–
–
–
2170
2170
2170
2170
MHz
MHz
MHz
MHz
782 10264 Single Unit
50 – 2200 / 2400 – 2500 MHz
782 10460 Single Unit
782 10341
782 10350
50 – 470 / 806 – 2500 MHz
824 – 880 / 890 – 960 MHz
824 – 894 / 907 – 960 MHz
793 532
Single Unit
793 533
Double Unit
782 10248,
782 10250
Single Unit
782 10249,
782 10251
Double Unit
793 423, 782 10243
Single Unit
793 424, 782 10244
Double Unit
782 10278,
782 10305
Single Unit
782 10279,
782 10306
Double Unit
782 10460
782 10341,
782 10350
793 425, 782 10245
Single Unit
793 426, 782 10246
Double Unit
793 528
Single Unit
793 529
Double Unit
Triple-band Combiner
793 425
793 426
782 10245
782 10246
Single Unit
Double Unit
Single Unit
indoor
– 960 / 1710 – 1880 / 1920 – 2170 MHz
– 960 / 1710 – 1880 / 1920 – 2170 MHz
– 960 / 1710 – 1880 / 1920 – 2170 MHz
– 960 / 1710 – 1880 / 1920 – 2170 MHz
806 – 960 / 1710 – 1880 / 1920 – 2170 MHz
806 – 960 / 1710 – 1880 / 1920 – 2170 MHz
806 – 960 / 1710 – 1880 / 1920 – 2170 MHz
Filter
products
793 528
793 529
782 10298
Single Unit
880
Double Unit
880
Single Unit
880
built-in DC stop
Double Unit
880
built-in DC stop
782 10298, Single Unit (indoor)
216
For more information please contact: [email protected]
Duplexers
824 – 2170 MHz
Duplexer GSM-R / GSM
793 004
793 005
7-16
N
876 – 880 / 921 – 925 MHz
876 – 880 / 921 – 925 MHz
782
782
782
782
7-16
1 x N, 3 x 7-16
7-16, 19" drawer
7-16, outdoor
890
890
890
890
10164
10165
10161
10162
–
–
–
–
915
915
915
915
/
/
/
/
935
935
935
935
–
–
–
–
960
960
960
960
MHz
MHz
MHz
MHz
793 004
793 005
782 10164 (indoor)
782 10162 (outdoor)
782 10161 (19˝ drawer)
782 10167
7-16
880 – 915 / 925 – 960 MHz
Duplexer AMPS A-Band, B-Band A/B-Band
782 10168
782 10169
782 10170
7-16
7-16, outdoor
7-16, 19" drawer
824 – 835 / 869 – 880 MHz
824 – 835 / 869 – 880 MHz
824 – 835 / 869 – 880 MHz
782 10171
782 10172
7-16
7-16, outdoor
835 – 851 / 880 – 896 MHz
835 – 851 / 880 – 896 MHz
782 10215
782 10216
7-16
N
824 – 851 / 869 – 896 MHz
824 – 851 / 869 – 896 MHz
782 10257
782 10265
7-16, 400 W
7-16, 800 W
782 10168, 782 10171
(indoor)
782 10169, 782 10172
(outdoor)
782 10170 (19˝ drawer)
824 – 846.5 / 869 – 891.5 MHz
824 – 846.5 / 869 – 891.5 MHz
782 10215, 782 10257
782 10216
Duplexer GSM 1800 / GSM 1900
792 542
782 10415
792 544
7-16
7-16, 19" drawer
7-16
1710 – 1785 / 1805 – 1880 MHz
1710 – 1785 / 1805 – 1880 MHz
1850 – 1910 / 1930 – 1990 MHz
782 10415 (19˝ drawer)
Duplexer UMTS
7-16
N
7-16, 19" drawer
1920 – 1980 / 2110 – 2170 MHz
1920 – 1980 / 2110 – 2170 MHz
1920 – 1980 / 2110 – 2170 MHz
782 10192
782 10193
Filter
products
782 10192
782 10193
782 10418
782 10418 (19˝ drawer)
For more information please contact: [email protected]
217
DTMAs, Bias Tees
1710 – 2170 MHz
GSM 1800 Double Tower Mounted Amplifier CWA
782 10312
782 10313
12 dB gain
24 dB gain
UL: 1710 – 1785 / DL: 1805 – 1880 MHz
UL: 1710 – 1785 / DL: 1805 – 1880 MHz
GSM 1800 Double Tower Mounted Amplifier AISG
782 10315
782 10316
12 dB gain
24 dB gain
UL: 1710 – 1785 / DL: 1805 – 1880 MHz
UL: 1710 – 1785 / DL: 1805 – 1880 MHz
GSM 1900 Double Tower Mounted Amplifier CWA
782 10400
782 10401
12 dB gain
24 dB gain
UL: 1850 – 1910 / DL: 1930 – 1990 MHz
UL: 1850 – 1910 / DL: 1930 – 1990 MHz
GSM 1900 Double Tower Mounted Amplifier AISG
782 10403
12 dB gain
782 10404
24 dB gain
782 10406
12 dB gain
with integrated duplexer
UL: 1850 – 1910 / DL: 1930 – 1990
UL: 1850 – 1910 / DL: 1930 – 1990
UL: 1850 – 1910 / DL: 1930 – 1990
pass band 806–960
MHz
MHz
MHz
MHz
782 10406
UMTS Double Tower Mounted Amplifier CWA
782 10301
782 10302
12 dB gain
24 dB gain
UL: 1920 – 1980 / DL: 2110 – 2170 MHz
UL: 1920 – 1980 / DL: 2110 – 2170 MHz
UMTS Double Tower Mounted Amplifier AISG
782 10147
782 10148
12 dB gain
24 dB gain
UL: 1920 – 1980 / DL: 2110 – 2170 MHz
UL: 1920 – 1980 / DL: 2110 – 2170 MHz
Power Distribution Unit (PDU)
782 10344
Smart Bias Tee
Filter
products
782
782
782
782
782
782
782
782
10253
10254
10255
10256
10453
10454
10455
10456
12
12
24
24
12
12
24
24
VDC BTS
VDC Antenna
VDC BTS
VDC Antenna
VDC BTS
VDC Antenna
VDC BTS
VDC Antenna
800
800
800
800
800
800
800
800
–
–
–
–
–
–
–
–
2170
2170
2170
2170
2170
2170
2170
2170
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
782 10454
782 10453
Bias Tee
793 304
782 10429 (AISG)
218
800 – 2170 MHz
800 – 2170 MHz
For more information please contact: [email protected]
3-dB Couplers, DC Stop, Filters
800 – 2500 MHz
Hybrid Combiner
782 10500
782 10502
782 10532
2:1
2:1
4:4
806 – 960 MHz
1710 – 2170 MHz
1710 – 2170 MHz
3-dB Coupler
793 506
793 006
793 554
7-16, outdoor
7-16, outdoor
7-16, outdoor
806 – 960 MHz
1700 – 2200 MHz
800 – 2200 MHz
Antenna
3-dB Coupler with Cable Absorber
792 699
792 702
793 555
Tx2
Tx1
806 – 960 MHz
1700 – 2200 MHz
800 – 2200 MHz
Measuring Directional Coupler
792 972
824 – 2500 MHz
DC Stop
793 301
800 – 2170 MHz
Band-pass Filter
793 540
1710 – 1880 MHz
Band-pass Filter
(AMPS/CDMA suppression filter)
782 10390
890 – 960 MHz
Low-pass Filter
50 Ω Load
876 – 960 MHz
Filter
products
793 539
Low intermodulation
782 10474
For more information please contact: [email protected]
806 – 2500 MHz
219
Fast-Antenna-Tester FAT 2700
■ Ideal for 50 Ω systems
■ Independent of the system-standard
■ Easy to use
■ Direct VSWR-Measurement
■ Accuracy + 5 % (20 MHz ... 800 MHz)
■ Frequency range 20 MHz ... 2.700 MHz
■ Frequency display RF-Generator: 4 digits
■ Battery operated
■ Small and handy
The Fast-Antenna-Tester FAT 2700 includes everything that is
needed to measure the installation of an antenna or a 50 Ω
cable-network: one RF-Generator with continuously settable
frequency in the range from 20 MHz to 2,700 MHz and a
VSWR-bridge. The result is displayed on an analog meter without any delay.
Specifications FAT 2700
The Fast-Antenna-Tester FAT 2700 with it’s low weight of less
than 0.5 kg – including the rechargeable accus – may be used
at any place.
RF-Generator:
Frequency range: ..................................... 20 MHz ... 2700 MHz
Frequency display: ......................................with counter 4 digits
Resolution:
Band I:
.20 MHz ... 800 MHz: ..... 0.1 MHz
Band II:
.800 MHz ... 1,600 MHz: ....... 1 MHz
Band III: 1,600 MHz ... 2,700 MHz: ........ 1 MHz
Accuracy: ..................................................................< + 3 x 10-5
Output level: ........................................................ – 3 dBm (typ.)
Max. permitted RF-level at the RF-connector: ........... < 100 mW
RF-connector: .............................................................. N-socket
The FAT 2700 is easy to use: Power on – set the frequency of
the RF-Generator – read out the VSWR – finished.
An accessory-set – consisting of a soft carrying bag for the
FAT 2700, an automobile cigarette charger cable and four
RF-adapters – completes the test equipment.
VSWR-Measurement:
Impedance:.......................................................................... 50 Ω
VSWR-Measuring range: ............................................. 1.0 ... 3.0
Accuracy:
Band I:
.20 MHz ... .800 MHz: ......... + 5 %
Band II:
.800 MHz ... 1,600 MHz: ...... + 10 %
Band III: 1,600 MHz ... 2,700 MHz: ....... + 15 %
General data:
Power requirements: ............................... 4 ea. NIMH-Accus AA
Operating temperature: ..................................... 0 °C ... + 50 °C
Electrical safety: ......................................................... EN 61010
EMC: ............................................................................ CE-mark
Dimensions (H x W x D): ................ 184 mm x 92 mm x 34 mm
Weight (including. accus): ................................................ 0.5 kg
Contents of delivery: .................................. Fast-Antenna-Tester
4 ea. Accus (built-in)
1 ea. Battery charger (220 V, 50 Hz)
1 manual English/German
Ordering information:
Fast-Antenna-Tester FAT 2700 ........................... BN 86817.000
Accessories:
Accessory set ...................................................... BN 86817.101
Consisting of:
soft carrying bag
RF-adapter set (FME-plug, BNC socket, TNC socket, Mini-UHF
socket)
adapter 7-16 to N connector (length approx. 50 cm)
automobile cigarette charger cable
Please contact for technical information and orders:
SCHOMANDL-Vertriebs-GmbH
Bahnhofstraße 108 · D-83224 Grassau/Germany
Telephone: 08641-403-140 · Telefax: 08641-403-264
e-mail: [email protected] · Internet: http://www.schomandl.de
220
WLAN Power Meter
Display forwarded power, reflected power and VSWR simultaneously
Range from 50µW to 1W
VSWR from 1.04 to 9.99:1
2 GHz to 6 GHz
Diagnose 802.11a,b and g WLAN
Specifications
Model No.:
3019
Frequency range:
2 – 6 GHz
Insertion loss:
<0.4dB
Absolute accuracy :
±1dB
Power range indicated:
1µW – 999mW
VSWR indicated:
1.01 – 9.99 : 1
Directivity:
>30dB
Peak Detect of:
<1mS pulse
Auto Power off
1 minute
Power Supply:
3Volt (2 X AAA Alkaline)
Max power consumption:
50 mA
Operating time (no backlight)
20 Hours
Optional Accessories:
SMA to RPSMA adaptors
Belt clip
Option
EMI/RFI
EN55022 /B
Dimensions:
– Width:
– Depth:
– Height:
Weight incl. Batteries:
58 mm
23 mm
105 mm
approx. 130g
Temperature:
– Operating
– Storage
0 to 40°C
–20 to 80°C
Colour:
– Standard
White/Grey
Please contact for technical information and orders:
SCHOMANDL-Vertriebs-GmbH
Bahnhofstraße 108 · D-83224 Grassau/Germany
Telephone: 08641-403-140 · Telefax: 08641-403-264
e-mail: [email protected] · Internet: http://www.schomandl.de
221
Broadcast RF Power Monitor
Digital RF Power Meter
Also avalible as 19″ Rack mount Version
Specifications for Broadcast Power Monitor with external coupler
Model No.:
3014
Frequency range: (Coupler dependent)
Coupling Flatness ,
from 6dB/octave Probes 3015,3016
Absolute accuracy after offset adjustment:
True RMS Power range:
50 – 860 MHz
±0,2dB
±0,2dB (±4%)
–34 dBm to +10 dBm
Peak Power range:
+24 dBm
Dynamic range:
> 50 dB
Power readout: Auto range 1KW – 999KW
1024 steps
Coupler attenuation VHF @ 100MHz:
43 dB to 73 dB
Coupler attenuation UHF @ 500MHz:
50 dB to 80 dB
VSWR readout:
1,00:1-9,99:1
Remote Temperature Sensing
0 – 99°C
Remote Voltage Sensing
0–100VDC
Remote Current Sensing
0–3V DC (1024 bits)
Relay Out/Digital Out:
Open Collector 50V/0,5A
Controller out for SNMP or dialup
RS232 1200- 9600 Bps
Power Supply:
– AC power:
Max power consumption:
– AC
90-264V @ 50-60Hz
10V/A
EMI/RFI
EN55022 /B
Connectors: – RF sensors
– Power AC in rear Options:
– Analogue/digital – RS232
DB9 Female
IEC
DB9 Female
DB9 Male
Dimensions:
– Width: 19″ unit
– Depth: 1HU
Dimensions:
– Width: Stand alone unit
– Depth: – Height:
Weight:
Temperature:
– Operating -Storage
Colour: – standard
482.5 mm
180 mm
44 mm
216 mm
180 mm
53 mm
approx. 1.8 kg
5 to 50°C
20 to 80°C
Silver Anodised
Please contact for technical information and orders:
SCHOMANDL-Vertriebs-GmbH
Bahnhofstraße 108 · D-83224 Grassau/Germany
Telephone: 08641-403-140 · Telefax: 08641-403-264
e-mail: [email protected] · Internet: http://www.schomandl.de
222
Summary – Mechanical Accessories
Clamps, Downtilt Kits ...
Page
Mounting Configurations
224
A-Panels / C-Panels / Eurocell Panels
Dimensions
225
Clamps
227
Three Sector Clamps and Masts
229
2 x A-Panel Mounting Kit
230
Downtilt kits
231
F-Panels
Dimensions
234
Detailed Connector Position
235
Clamps
236
Three Sector Clamp
237
2 x F-Panel Mounting Kit
238
Downtilt kits
239
Slant Compensation
239
Azimuth Adjustment Kits
for A-Panels, C-Panels, Eurocell Panels, F-Panels
240
Omnidirectional Antennas
Clamp for larger Mast Diameters
241
Side-mounting Brackets
242
Tri-Sector Pipe Antennas
Flexible Sealing Frame
111
Additional TMA Service Area
112
Tools
Azimuth Adjustment Tool
244
Kathrein Installation Tool (Triple-band Antenna)
245
New Products
223
Mechanical
Accessories
For additional information
on the mounting of antennas,
please check also our
broschure:
Mounting Configurations
Small Pipe Diameter
Large Pipe Diameter
Off-set
Flat Surface
Not applicable for Eurocell Panels with connector position
rearside.
A-Panels ...
Standard Downtilt
224
Off-set Downtilt
A-Panels
Antenna Dimensions
72
64
A
B
C
256 mm
310 mm
350 mm
656 mm
710 mm
750 mm
1296 mm
1350 mm
1390 mm
1936 mm
1990 mm
2030 mm
9
A-Panels
with 65° and 90° Half-power Beam Width
2580 mm
2634 mm
2674 mm
A Corresponds with the antenna height mentioned in the technical data.
A
B
C
B
C
Bottom view
+45°
-45°
116
58
262
72
9
64
Dual-band A-Panels
with 65° Half-power Beam Width
A
B
C
770 mm
824 mm
864 mm
1316 mm
1367 mm
1407 mm
1916 mm
1967 mm
2007 mm
2516 mm
2567 mm
2607 mm
2580 mm
2634 mm
2674 mm
A Corresponds with the antenna height mentioned in the technical data.
A
Adjustment mechanism
with integrated scale
262
Bottom view
225
A-Panels ...
52
139
58
A-Panels / C-Panels / Eurocell Panels
Antenna Dimensions
72
A
B
C
64
9
Triple-band A-Panel
with 65° Half-power Beam Width
1498 mm 2058 mm 2628 mm
1541 mm 2101 mm 2671 mm
1581 mm 2141 mm 2711 mm
A Corresponds with the antenna height mentioned in the technical data.
A
B
C
B
C
149
Adjustment mechanism
with integrated scale
262
Bottom view
72
9
64
C-Panels
A
B
C
1294 mm 1694 mm 1934 mm 2254 mm
1340 mm 1724 mm 1980 mm 2300 mm
1382 mm 1764 mm 2022 mm 2342 mm
A Corresponds with the antenna height mentioned in the technical data.
Eurocell Panels
A
B
C
264 mm
––
––
654 mm
974 mm 1294 mm 1934 mm 2254 mm 2574 mm
710 mm 1030 mm 1350 mm 1990 mm 2310 mm 2630 mm
750 mm 1070 mm 1390 mm 2030 mm 2350 mm 2670 mm
A
A Corresponds with the antenna height mentioned in the technical data.
A-Panels ...
103
Top view
258
226
A-Panels
30° Half-power Beam Width
Mounting Hardware
A-Panels
with 30° Half-power Beam Width
A
B
∅ 11
656 mm 1296 mm 2580 mm
584 mm 1224 mm 2504 mm
A
B
A Corresponds with the antenna height mentioned in the technical data.
177
116
Side view
180.5
348
560
Bottom view
Clamps
Type No.
Description
733 736
K 61 14 03
K 61 14 04
K 61 14 05
2
2
2
2
clamps
clamps
clamps
clamps
Remarks
Mast:
Mast:
Mast:
Mast:
50 – 125 mm diameter
116 – 210 mm diameter
210 – 380 mm diameter
380 – 521 mm diameter
Weight Units per
approx. antenna
5.9
4.6
6.5
9.4
kg
kg
kg
kg
1
1
1
1
Pair of clamps K 61 14 03
Downtilt kits
656 mm
1296 mm
2580 mm
Downtilt angle
Type No.
Weight
0 – 33°
0 – 16°
0 – 8°
733 695
3.4 kg
Downtilt kit 733 695
227
A-Panels ...
Antenna height
A-Panels 65° and 90° / C-Panels / Eurocell Panels
Mounting Hardware
Clamps
C-Panels / Eurocell Panels C-Panels / Eurocell Panels
C-Panels / Eurocell Panels
Antenna height: 2574 mm
Antenna height: 654 mm
Antenna height: 264 mm
to
2254 mm
and all A-Panels 65° and 90°
10
3
10
8
25
10
3
3
8
8
25
25
26
4
65
9 4
1274
1994
2234
54
25
74
Mast diameter
Type No.
Distance A
mm
Small Pipe
28 – 64 mm
*731 651*
22 – 30
330 g
see sketch
Large Pipe
50 – 115 mm
110 – 220 mm
210 – 380 mm
738 546
850 10002
850 10003
18 – 26
47 – 56
48 – 69
1.0 kg
2.7 kg
4.8 kg
see sketch
see sketch
see sketch
Off-set
60 – 115 mm
115 – 210 mm
210 – 380 mm
380 – 521 mm
2.0
2.6
4.0
5.3
see
see
see
see
Description
A
733
733
733
733
677
678
679
680
117 – 124
146 – 160
148 – 168
150 – 175
Weight Units per
approx. antenna
kg
kg
kg
kg
* Not allowed for panels:
742 241, 742 264, 742 265, 742 266, 742 270, 742 271, 742 272, 800 10292
731 651
738 546
733 678
50 mm
A-Panels ...
26 mm
228
40 mm
sketch
sketch
sketch
sketch
A-Panels / C-Panels / Eurocell Panels
3 Sector Panel Arrangement – Mounting Hardware
3 Sector Clamp Kit / Pipe Mast with Flange Base
Slim and unobstrusive design
Nearly cylindrical optical appearance with small outer diameter
● Suitable for all Eurocell Panels
● Suitable for all A-Panels 65° and 90° (Single-band, Dual-band) with
weight less than 30 kg including downtilt kit and/or offset clamp
● Mounting of F-Panels possible but not optimized
● For antennas with weight more than 30 kg downtilt kit and/or offset
clamp are not allowed
●
●
3 Sector Clamp Kit
Type No.
Angle between antennas
Suitable for mast diameter
Type No. of pipe mast
(please order separately)
Number of pieces
742 033
742 034
120°
114.3 mm
742 035
120°
139.7 mm
742 036
2 x 3 sector clamp
2 x 3 sector clamp
2 x mounting support
2 x mounting support
clamp
clamp
Material – 3 sector clamp
Hot-dip galvanized steel Hot-dip galvanized steel
– Mounting support
Aluminum
Aluminum
clamp
– Screws
Stainless steel
Stainless steel
Outer diameter (Dout) of the
3 A-Panel Arrangement
460 mm
482 mm
3 Dual-band A-Panel Arr.
511 mm
533 mm
3 Triple-band A-Panel Arr.
532 mm
555 mm
Weight – Clamp kit
3.0 kg
3.2 kg
– 3 sector clamp
1.4 kg
1.5 kg
64 ± 0.5
Dout
9
E
B
60
°
3 sector clamp
F
C
A
Bottom view without downtilt kit
Mounting support clamp
Type No.
A
B
742 033
114.3
88
742 034
139.7 100
all dimensions in mm
Torque 8 Nm
C
217
236
D
207
228
D
E
49
49
F
45
45
3000
D
742 036
114.3 mm
139.7 mm
6.3 mm
4 mm
3000 mm
3000 mm
210 mm
265 mm
14 ± 1 mm
19 ± 1 mm
170 mm
225 mm
6
6
18 ± 1 mm
18 ± 1 mm
M16 x 100 mm
M16 x 100 mm
Quality min. 8.8
Quality min. 8.8
60 kg
55 kg
S355 J2H (St 52-3N) DIN EN 10210-1
S235 JR G2 (RSt 37-2) DIN EN 10025
Maximum permissible load: According DIN 4131 and DIN 4132
Fatigue class K2
18±1
170
210
225
265
742 035
742 036
229
A-Panels ...
Pipe diameter
D
according DIN 2448
Wall thickness pipe
Pipe length
Flange diameter
Flange thickness
S
Hole circle diameter
Number of holes
Hole diameter
Enclosed bolts thread x length
Hot-dip galvanized steel
Weight
Material pipe mast
Material flange base
742 035
S
Type No.
129 ± 2
Pipe Mast with Flange Base
A-Panels / C-Panels / Eurocell Panels
Mounting Hardware
2 x A-/C-Panel Mounting Kit
Use this mounting kit only for antennas less than
25 kg each.
850 10006
Type No.
No. of pieces
2 x brackets
Suitable for A-/C-Panels
65°, 90° with a max. height
2.6 m
Material: – Clamp
– Screws
Hot-dip galvanized steel
Stainless steel
Weight
Approx. 3.3 kg
Mounting
Screws are supplied
Recommended torque for M8 bolted connections: 12 Nm
64±0.2
0
R1
390±1
64±0.2
73
34
64±0.2
0.5
∅9±
280±0.5
Mounting Accessories (order separately)
Clamps (only the listed clamps are allowed!)
Weight Units per
approx. antenna
Type No.
Description
Remarks
850 10002
1 clamp
Mast: 110 – 220 mm diameter
2.7 kg
2
850 10003
1 clamp
Mast: 210 – 380 mm diameter 4.8 kg
2
A-Panels ...
Please chose the fitting downtilt kit that you need, from the antenna datasheet.
230
A-Panels / C-Panels / Eurocell Panels
Mounting Hardware
Downtilt kit
Antenna height: 654
974
1294
1694
1934
2254
/ 656 mm
mm
/ 1296 mm
mm
/ 1936 mm
/ 2256 mm
Use the downtilt kit together with
the clamps (see page 227 and 228)
Screws supplied 13A/F
3
0
12
69
15
2
0
Scale
Before the adjustment, all joint
screws (13A/F) must be loosened.
After the adjustment has been
completed, all loosened screws
must be tightened with a torque of
12 Nm.
ot
are n
s
t
i
k
t
l
h
ownti
ls wit
The d d for Pane 25 kg,
e
allow more than ility
ht
sib
g
i
e
lt pos
aw
i
t
n
w
for do e page 233
se
Downtilt kit
with scale
Downtilt angle
Antenna height
Downtilt angle
Type No.
654 / 656 mm
0° – 30°
737 972
974 mm
0° – 21°
737 973
1294 / 1296 mm
0° – 16°
737 974
1694 mm
0° – 12°
–
1934 / 1936 mm
0° – 11°
737 975
2254 / 2256 mm
0° – 9°
–
Downtilt kit
without scale*
Type No.
Weight
737 978
approx. 2.8 kg
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
231
A-Panels ...
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
A-Panels / C-Panels / Eurocell Panels
Mounting Hardware
Downtilt kits
Suitable for:
A-Panels
with an antenna height of 2580 mm
C-Panels / Eurocell Panels
with an antenna height of 2574 mm
Screws supplied
Screws supplied
3
0
12
69
15
2
0
3
0
12
69
Scale
15
2
0
Scale
Type No. 737 971
Downtilt angle: 0° – 8°
ot
are n
s
t
i
k
t
l
h
ownti
ls wit
The d d for Pane 25 kg,
e
allow more than ility
b
ht
g
i
possi
a we
wntilt
3
o
3
d
2
r
fo
age
see p
Type No. 737 976
Downtilt angle: 0° – 8°
A-Panels ...
The downtilt kits should only be mounted with clamps
738 546, 850 10002, 850 10003
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
232
A-Panels / C-Panels / Eurocell Panels
Mounting Hardware
Downtilt Kit
Special downtilt kit for Panel antennas
with a weight greater than 25 kg.
Downtilt kit
M10
supplied
850 10007
Type No.
Preferred range of use
M8
supplied
– Panel antennas with a weight of ≥ 25 kg
– Panel antennas with attached mounting plates
– Downtilt kit without scale for universal use
Weight
5.9 kg
Material
Hot-dip galvanized steel
All screws and nuts
Stainless steel
Recommended mast clamps:
Type No.
Description
Mast diameter
Weight
approx.
Units per
antenna
738 546
1 clamp
50 – 115 mm
1.0 kg
2
850 10002
1 clamp
110 – 220 mm
2.7 kg
2
850 10003
1 clamp
210 – 380 mm
4.8 kg
2
Recommended torque for all bolted connections:
Screw size
Torque
M8
12 Nm
M10
26 Nm
Maximum acceptable load:
Frontal wind load
< 2500 N
Lateral wind load
< 830 N
Antenna weight
≤ 50 kg
64±0.5
0° – 15°
2058 mm
0° – 11°
2516 mm
0° – 8°
2628 mm
0° – 8°
∅9
64±0.5
232
M10
233
A-Panels ...
1498 mm
300
Downtilt angle
72
Antenna height
∅9
72
Downtilt angle
90
F-Panel Accessories
Dimensions of F-Panels with
33° / 45° / 65° / 88° Half-power Beam Width
Dimensions [mm]
(‘A’ corresponds to the antenna height given on the data sheet)
33° – 45° Half-power Beam Width
65° – 88 °Half-power Beam Width
A
B
C
A
B
C
982
1302
1942
1036
1356
1996
1076
1396
2036
182
342
502
662
702
982
1302
1319
1622
1942
2582
236
396
556
716
756
1036
1356
1384
1676
1996
2636
266
426
586
746
786
1066
1386
1424
1706
2026
2666
Front view
Front view
A B C
A B C
ø 8.5
9
F-Panels
72
234
A B C
ø 8.5
64
64
Front view
35
64
F-Panel Accessories
Dimensions of F-Panels
Detailed Connector Position
Vertical Polarization
60° – 65° Half-power Beam Width
155
90° Half-power Beam Width
155
76
33° Half-power Beam Width
262
52
+45°/–45° Polarization
65° Half-power Beam Width
155
58
90° Half-power Beam Width
155
54
65° and 90° Half-power Beam Width
adjustable electrical downtilt
+45°
155
199
45° Half-power Beam Width
Multi-band
adjustable electrical downtilt
45
30° Half-power Beam Width
Multi-band
adjustable electrical downtilt
299
45
65° Half-power Beam Width
2-Multi-band
adjustable electrical downtilt
299
48
65° Half-power Beam Width
2-Multi-band
adjustable electrical downtilt
323
235
F-Panels
–45°
F-Panel Accessories
Clamps for F-Panels
Clamps suitable for all F-Panels
Type No.
Mast
diameter
Weight
approx.
Units
per antenna
738 546
850 10002
850 10003
50 – 115 mm
110 – 220 mm
210 – 380 mm
1 kg
2.7 kg
4.8 kg
2
2
2
733
733
733
733
60 – 115 mm
115 – 210 mm
210 – 380 mm
380 – 521 mm
2.0
2.6
4.0
5.3
2
2
2
2
677
678
679
680
kg
kg
kg
kg
For more information
see data sheets
Type No. 738 546
40 mm
Clamps suitable for all F-Panels with a width of 155 mm until an antenna height of 1302 mm
incl. S-Panels
Type No.
734
734
734
734
734
734
Mast
diameter
360 34 – 60
361 60 – 80
362 80 – 100
363 100 – 120
364 120 – 140
365 45 – 125
mm
mm
mm
mm
mm
mm
Antenna
height
182
182
182
182
182
182
…
…
…
…
…
…
1302
1302
1302
1302
1302
1302
Weight
Units
per
approx. antenna
mm
mm
mm
mm
mm
mm
F-Panels
Type No. 734 362
236
60 g
70 g
80 g
90 g
110 g
80 g
1
1
1
1
1
1
For more information
see data sheets
Clamps are not allowed for
2-Multi-band F-Panels like
742 233, 742 234, 742 235,
742 236, 742 351
F-Panels – 3 Sector Panel Arrangement
Mounting Hardware
3 Sector Clamp Kit
Slim and unobstrusive design
Nearly cylindrical optical appearance with small outer diameter
● Suitable for all F-Panels with an antenna housing width
of 155 mm
●
●
3 Sector Clamp Kit
Type No.
742 263
Angle between antennas
Suitable for mast diameter
Number of pieces
120°
88.9 mm
2 x 3 sector clamp
2 x mounting support
clamp
Hot-dip galvanized steel
Aluminum
Material – 3 sector clamp
– Mounting support
clamp
– Screws
Outer diameter (Dout) of the
3 F-Panel Arrangement
Weight – Clamp kit
– 3 sector clamp
Stainless steel
315 mm
3.0 kg
1.4 kg
Remark
This clamp kit is not suitable for use
with additional mechanical downtilt kits
8.2
.9
88
168 ± 2
180 ± 2
65
60
°
64 ± 0.5
Torque 8 Nm
Dout
5°
–4
5°
Bottom view
237
F-Panels
50
–4
+45°
42
–45°
Mounting support clamp
5°
+4
+4
5°
3 sector clamp
F-Panel Accessories
Mounting Hardware
2 x F-Panel Mounting Kit
For arranging two F-Panels 65°, 90° side by side
(on air combining).
● The mounting kit consists of two mounting plates.
●
2 x F-Panel Mounting Kit
Type No.
742 113
No of units
Suitable for F-Panels
65°, 90° with max. height of
Material
Weight
Mounting
2
2m
Hot-dip galvanized steel
approx. 1.6 kg
Screws are supplied
270
101
64±0.5
∅9
∅9
12 18
19
41
20 10
75
10
116
15 15
45°
64±0.5
Configuration without mechanical downtilt
Configuration with mechanical downtilt
03
6
9 12
15
2
0
m
10 m
Use the 2 x F-Panel Mounting Kit
together with the following mounting accessories
Type No. Description
F-Panels
738
733
733
733
733
737
238
546
677
678
679
680
978
1
1
1
1
1
1
clamp
offset clamp
offset clamp
offset clamp
offset clamp
downtilt kit
Remarks
Mast: 50 – 115 mm diameter
Mast: 60 – 115 mm diameter
Mast: 115 – 210 mm diameter
Mast: 210 – 380 mm diameter
Mast: 380 – 521 mm diameter
Downtilt angle:
depending on antenna height
Weight Units per
approx. antenna
1.0
2.0
2.6
4.0
5.3
2.8
kg
kg
kg
kg
kg
kg
2
2
2
2
2
1
For a three sector panel arrangement,
use the mounting kit type no. 742 113
together with the three sector clamp
(see page 229). Three sector clamp
742 263 is not allowed.
F-Panel Accessories
Downtilt Kits and Slant Compensation Kit
for F-Panels
Downtilt Kits with Type No. 737 ... are suitable for all F-Panels
Use the downtilt kit together with
the clamps (see page 236).
Screws supplied
3
0
Downtilt kit
with scale
Downtilt kit
without scale*
12
69
Downtilt angle
Type No.
Type No.
Weight
342 mm
662 mm
982 mm
1302 mm
1622 mm
1942 mm
2582 mm
0° – 54°
0 °– 30°
0° – 21°
0° – 16°
0° – 13°
0° – 11°
0° – 8°
–
737 972
737 973
737 974
–
737 975
737 971
737 978
approx. 2.8 kg
15
Antenna height
2
0
Scale
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
Downtilt Kits with Type No. 732 ... are suitable for F-Panels until 1302 mm
Use the downtilt kit together with
the clamps (see page 236).
Screws supplied
86
10 4 2
0
Scale
Antenna height
342
502
662
982
1302
mm
mm
mm
mm
mm
Downtilt angle
0°
0°
0°
0°
0°
–
–
–
–
–
40°
25°
20°
14°
10°
Downtilt kit
with scale
Downtilt kit
without scale*
Type No.
Type No.
Weight
–
732 322
732 321
732 318
732 317
732 327
approx. 1.0 kg
* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.
Mounting a downtilt kit enlarges the spacing between mast and antenna by 42 mm.
Slant Compensation Kit Type No. 732 319
for F-Panels with 60° – 160° Half-power Beam Width
57 mm
77
mm
Use the slant compensation kit
type no. 732 319 together with the
clamps (see page 236).
239
F-Panels
Weight: appr. 200 g
A-Panels / C-Panels / Eurocell Panels / F-Panels
Mounting Hardware
Azimuth Adjustment Kits
Pole mounting
Wall mounting
Y
X
358
308±1
109
46
86
50
104
62±0.5
Distance A
see table
43
∅ 15
±0.5
14
106
180±1
The azimuth adjustment kit for pole mounting can be mounted with all suitable clamps, 3-Sector clamps and
2x A-/C-/F-Panel mounting kits (with the latter only as an interface between mounting kit and antenna).
Type No.
850 10014
Suitable for
Number of pieces
Distance between screws [A]
2 brackets
2 brackets
2 brackets
72 mm
64 mm
72 mm
± 30°
approx. 550 g
± 30°
approx. 700 g
all screws
Materials
approx. 1050 g
A-Panels...
approx. 1200 g
Screws and dowels for wall fastening are
not supplied, they must be chosen by installer
according to on-site requirements.
Parts are hot-dip galvanized steel; Captive nuts are stainless steel
2150 N
760 N
5100 N
1350 N
Recommended torque for all supplied screws: 20 Nm, MoS2 greased
240
850 10017
wall mounting
64 mm
Supplied mounting
accessories
Max. permissible static
load / kit
– X direction
– Y direction
850 10016
2 brackets
Angular range
Weight
850 10015
pole mounting
2150 N
760 N
5100 N
1350 N
Side-mounting Clamp
Omnidirectional Antennas
Large Pipe
Type No. 738 908
For mast diameters of 94 – 125 mm
Antenna
Mast
b
a
241
Omni
b
Side-mounting Bracket
Omnidirectional Antennas
Type No. 737 398
∅D
Side-mounting bracket
(for mast diameters of 40 – 105 mm)
Type No.
737 398
Bracket
At the top and at the bottom
Fits for antenna
type no:
800/900 MHz
736 347
736 348
736 349
736 350
736 351
738 664
738 192
1800 MHz
739 785
738 187
739 404
737 190
A
UMTS
741 790
Dual-band
800 10274
Side-mounting is possible for four fixed distances between the tubular mast and the antenna:
800/900 MHz
A = 100 mm = 0.3 λ
1800/2000 MHz
(holes 1 and 3)
A = 160 mm = 0.5 λ
A = 240 mm = 0.75 λ
A = 80 mm = 0.5 λ
A
A
A
A
(hole 2)
Bracket
Antenna
Antenna base
Mast
Bracket
Hole 3
D
Pipe
D
Hole 1
D
Horizontal
Radiation Pattern
Spacing
A
Curve
Hole 3
Hole 2
D
Pipe
D
D
Horizontal
Radiation Pattern
100 mm
Spacing
A
Curve
Pipe
D
Curve
Horizontal
Radiation Pattern
Spacing
A
100 mm
40 mm
100 mm
Omni
242
dB
3
0
0
direction from mast
to antenna
80 mm
160 mm
3
240 mm
direction from mast
to antenna
dB
160 mm
dB
40 mm
3
100 mm
240 mm
0
direction from mast
to antenna
Side-mounting Brackets
Omnidirectional Antennas
900
For mast diameters of 40 – 105 mm
Type No.
Bracket
Fits for antenna
type no.
K 61 33 5
K 61 33 6
at the bottom
only
at both the top
and the bottom
øD
K 75 11 6 ..
K 75 15 6 ..
738 779
741 558
Side mounting is possible for three fixed distances between
the tubular mast and the antenna:
100 mm = 0.3 λ
160 mm = 0.5 λ
240 mm = 0.75 λ
Pipe
D
Horizontal
Radiation Pattern
Spacing
A
Curve
Additional gain
to the nominal value
of the antenna gain
A
100 mm
2 dB
160 mm
3 dB
dB
40 mm
3
240 mm
2 dB
0
direction from mast
to antenna
100 mm
2.5 dB
160 mm
3.5 dB
dB
100 mm
3
240 mm
0
2.5 dB
K 61 33 6
243
Omni
direction from mast
to antenna
A-Panel / C-Panel / F-Panel / Eurocell Panel
Accessories
Azimuth Adjustment Tool
Type No. 738 440
Precise azimuth adjustment for mast mounted antennas can easily be achieved by using the azimuth
adjustment tool.
This tool is suitable to all types of Eurocell Panels
• Panels
• A-Panels
• C-Panels
• F-Panels
• X-Pol F-Panels
• Tri-Sector Antenna
Elevation
compensation
Target object
Target object
Scale
Move the stopper to central position*
Panel
Clamping device
A-Panel
262
F-Panel 33°
equivalent for
F-Panel
A-Panel
199
F-Panel
F-Panel
155
equivalent for
F-Panel
F-Panel
X-Pol-F-Panel
Instruction:
– Use a map to work out the angle between the designed antenna azimuth and target
(church, building, mountain peak).
– Set this angle on the scale of the adjustment tool.
– Place the adjustment tool onto the antenna and tighten the clamping device.
– Use the telescope to aim at the target object, if necessary, use elevation compensation.
– Then rotate the antenna until the target object appears in the telescope.
Tools
* Observe the position of the stopper when fitting the azimuth adjustment tool.
244
X-Pol-F-Panel
Kathrein Installation Tool
for Triple-band Antennas
Type No. 850 10005
Please note: To avoid any damage to the interfaces, please ensure that only suitable tools are used. To
tighten the feederline connector interfaces, we strongly recommend using a special Kathrein installation tool
(as shown below) in combination with a standard torque-wrench.
Kathrein installation set: Type No. 850 10005
Set has to be ordered separately!
Set consists of two spanners of 27 and 32 mm width.
1/2″ square actuation according to
DIN 3120 Form C
27 or 32 mm
These tools are suitable for 7-16 connectors with a wrench
size of 27 mm or 32 mm.
Tighten nut within a torque range of 25 – 33 Nm depending
on connector manufacturers’ specifications.
Description of connector arrangement:
2
1
8
Adjustment mechanisms (1 – 3)
3
6
4
5
7
9
Feederline connectors (4 – 9)
There are six feederline connectors and three adjustment mechanisms located at the bottom
of the antenna.
245
Tools
For detailed information about feederline installation for Triple-band Antennas please refer to page 190.
Subsidiaries/Affiliates
Internet: http://www.kathrein.de
KATHREIN-Werke KG . Phone +49 80 31 184-0 . Fax +49 80 31 184-494
Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . D-83004 Rosenheim . Germany
• Russia
RC & C Ltd.
Ul. Suscevskaya, Dom 9, Str. 4, 127055 Moscow
Tel +74 95 744 1070, Fax +74 95 972 4200
[email protected]
• Saudi Arabia
Bazy
Omar Ibn Abdul Aziz Road, KSA 11486 Riyadh
Tel +966 14 76 77 70, Fax +966 14 79 36 47
• Serbia
PANOS engineering d.o.o.
Vojvodjanskih brigada 17
SCG 21000 Novi Sad
Tel + 381 21 472 0644, Fax + 381 21 472 0692
[email protected]
• Slovenia
SKYLINE d.o.o.
Celovska 150
SI 1000 Ljubljana
Tel ++386 1 500 5001, Fax ++386 1 500 5005
[email protected]
• South Africa
KATHREIN-South Africa (Pty) Ltd.
Annandale Road, off R44
Stellenbosch, 7600
Tel +27 (0)21 881 8200, Fax +27 (0)21 881 8201
[email protected]
• Spain
ESB SISTEMAS España S.L.
C/ Plaza Avilés, 13
46988 Pol. Industrial Fte. Del Jarro. Paterna (Valencia)
Tel +34 96 134 07 97, Fax +34 96 134 08 00
[email protected]
• Sweden
ab Intensa
Box 1253, SE-18124 Lidingö
Tel +46 8 76 70 195, Fax +46 8 76 52 256
[email protected]
• Switzerland
BONANOMI AG
Motorenstraße 23, 8623 Wetzikon
Tel +41 1 931 01 80, Fax +41 1 931 01 82
[email protected]
• Thailand
KATHREIN Indochina Co. Ltd.
17/151 Moo 1 Sukonthasawat Road
Latphrao District, Latphrao, Bangkok 10230
Tel +66 2 57 88 30 03, Fax +66 25 70 92 89
[email protected]
• Turkey
Kure Elektronik Ltd. Sti
Çynar Sok. Emlak Bankasy Apt. No:1, Kat:9 D:36
4.Levent, TR Istanbul
Tel +90 21 22 84 19 79, Fax +90 21 22 84 04 50
[email protected]
• Ukraine
Selteq
29-V, Timoshenka ul. 42, UA 04205 Kiev
Tel +380 4 44 68 73 69, Fax +380 4 44 68 73 69
[email protected]
• USA
KATHREIN Inc., Scala Division
P.O. Box 4580, USA Medford, OR 97501
Tel +1 54 17 79 65 00, Fax +1 54 17 79 77 53
[email protected]
Status: October 2006
Subject to alteration.
• Israel
ABAMCO Ltd.
P.O. Box 278, IL 27036 Kiryat Bialik
Tel +972 48 70 77 85, Fax +972 48 70 02 83
[email protected]
• Italy
SIRA Sistemi Radio
Via Senatore Simonetta, 26, I 20040 Caponago, MI
Tel +39 02 95 96 11, Fax +39 02 95 96 13 11
[email protected]
• Japan
Sumisho Machinery Trade Corp
Telecommunication Project Division
Triton Square Office Tower Z 21F, 1-8-12,
Harumi, Chuo-ku, JP Tokyo 104-6222
Tel +81 35 14 49 234, Fax +81 35 14 49 296
[email protected]
• Jordan
Moseco Jordan
P.O. Box 1914, HKJ 11941 Amman
Tel +962 6 462 16 21, Fax +962 6 462 52 85
[email protected]oseco.com.jo
• Korea
KATHREIN ASIA Seoul Co., Ltd.
1120 Ho, Hyundai Ventureville 713 Suseo-dong,
KangNam-Gu ROK
135-539 Seoul
Tel + 82 2 2040 70 –15 8, Fax + 82 2 2040 7018
[email protected]
• Latvia
SIA Baltronic
3 Smerla str., office 270
LV 1006 Riga
Tel +371 752 99 30, Fax +371 781 62 44
[email protected]
• Lithuania
UAB Baltronic Vilnius
Zemaites g.21, Lit. 2600 Vilnius
Tel +370 61 29 42 80, Fax +370 2 31 06 23
[email protected]
• Malaysia
KATHREIN SEA (M) SDN BHD
No.16-2, Jalan USJ 21/6,UEP Subang Jaya
47630 Subang Jaya / Selangor Darul Ehsan
Tel +60 3 8024 8089 / 9089, Fax +60 3 8024 7089
[email protected]
• Middle East
KATHREIN Middle East FZCO-Reg.: 1069
P.O.: 293607
DAFZA-Dubai Airport, U.A.E.
Tel +971 (0)42045040, Fax +971 (0)42045042
[email protected]
• Netherlands
Hutronic Telecommunicatie BV
Johan van Oldenbarneveltlaan 44, NL-3705 HH Zeist
Tel +31 30 699 91 00, Fax +31 30 221 33 30
[email protected]
• New Zealand
Maser Communications NZ Ltd.
6A Piemark Drive, P.O. Box 302-225, North Harbour,
Auckland
Tel +64 94 14 03 30, Fax +64 94 14 03 31
[email protected]
• Norway
TINEX AS
Postboks 55, N-1306 Baerum Postterminal
Durudveien 37–39, N-1346 Gjettum
Tel +47 67 80 84 90, Fax +47 67 80 84 99
[email protected]
• Poland
KATHREIN Poland SP.ZO.O
UI Bokserska 64, 02-690 Warszawa
Tel +48 22 420 21 22, Fax +48 22 420 21 11
[email protected]
• Portugal
REDTEL, S.A.
Rua Domingos José Morais, n° 61, 2° Dt.°
2685-046 Sacavém
Tel +351 210 189 140, Fax +351 210 189 141
[email protected]
• Qatar
MOSECO Qatar
Murghab aljaded, Alnaseer St
P.O. Box: 5406, Doha, Qatar
Tel +974 4363911, Fax: +974 4365142
[email protected]
• Romania
ROMKATEL S.R.L.
Str. Dristor, no. 5, bloc A 20, scara 2, parter, apt. 16,
RO 31531 Bucharest
Tel +40 2 13 22 74 40, Fax +40 2 13 20 44 08
[email protected]
For every other region, please contact:
Head Office · KATHREIN-Werke KG
Anton-Kathrein-Straße 1-3
P.O. Box 10 04 44
D-83004 Rosenheim/Germany
Please contact for:
Sales queries, orders, catalogues or CD-ROMs:
Fax: +49 8031 184 820
Email: [email protected]
Technical Information:
Fax +49 8031 184 973
Email: [email protected]
9981.0492/0107/10/ZW/MM
• Australia
Maser Communications AUS Ltd.
9/15B Rodborough Rd, P.O. Box 6298
AUS NSW 2086 Frenchs Forest
Tel +61 2 94 52 60 62, Fax +61 2 94 52 63 40
[email protected]
• Austria
KATHREIN-Vertriebs Ges. mbH
Gnigler Str. 56, 5020 Salzburg
Tel +43 662 87 55 31 32, Fax +43 662 87 83 449
[email protected]
• Belgium
DELTRONIC N.V.S.A.
Merksemsesteenweg 40 B 2100 Deurne
Tel +32 3 360 3920, Fax +32 3 32 64 818
[email protected]
• Brazil
KATHREIN MOBILCOM BRASIL LTDA.
Rua das Baiadeiras, 280/290, 04675-210 São Paulo - SP
Tel +55 11 5685-4290, Fax +55 11 5685-4292
[email protected]
• Bulgaria
Marcotec Sofia Ltd.
17 Elemag, Str., BG 1113 Sofia
Tel +35 928 66 22 10, Fax +35 928 65 96 05
[email protected]
• China
KATHREIN China Ltd.
Suite 10A, 28 Floor, Cable TV Tower
9 Hoi Shing Road, PRC Hong Kong - Tsuen Wan, N.T.
Tel +852 24 92 05 98, Fax +852 24 92 35 18
[email protected]
• Czech Republic
AEC ELEKTROTECHNIKA spol s.r.o.
Na rovinách 6, CZ 14200 Prague/Praha 4
Tel +420 2 41 71 00 48, Fax +420 2 41 71 00 03
[email protected]
• Denmark
Intensa Danmark
Park Allé 287 A, DK 2605 Brøndby
Tel +45 70 22 42 28, Fax +45 70 22 62 28
[email protected]
• Estonia
Baltronic OY
Veerenni 52, EE 11313 Tallinn
Tel +37 26 99 67 90, Fax +37 26 99 67 99
[email protected]
• Finland
Intensa – Finland
PL 146, FI-00201 Helsinki
Tel +358 9 685 53730, Fax +358 9 685 53732
[email protected]
• France
KATHREIN-France
B.P.51,7 Rue des Gardes
F 91371 Verriéres le Buisson Cedex
Tel +33 16 95 36 453, Fax +33 16 95 36 454
[email protected]
• Great Britain
Quadrant Connections Ltd.
Bridgefoot House, Watling Str.,
GB Radlett, Herts. WD7 7HT
Tel +44 19 23 85 14 00, Fax +44 19 23 85 75 67
[email protected]
• Greece
Mortek Ltd.
9, Saint Andrews Str., GR 17122 New Smyrna, Athens
Tel +30 10 94 08 601, Fax +30 10 94 08 148
[email protected]
• Hungary
Rakotrade Kft
Guyon Richard U. 13, H 1026 Budapest
Tel +36 12 00 69 68, Fax +36 12 00 69 71
[email protected]
• India
KATHREIN India Private Limited
4-B4, 3rd Floor, Industry Manor, Prabhadevi
IND 400 025 Mumbai, Bombay
Tel +91 22 66 52 66 00, Fax +91 22 66 52 66 99
[email protected]
• Iceland
Smith & Norland
P.O. Box 519, IS 121 Reykjavik
Tel +35 45 20 30 00, Fax +35 45 20 30 11
[email protected]
• Iran
TELECOM ARYAN
First Floor, No. 45, Parvin St., IR 1966813973 Tehran
Tel +9821 204 7954-5, Fax +9821 201 5273
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement