Delfield F18BC User's Manual

Delfield F18BC User's Manual
Custom Systems
F18 SERIES
Service and Installation Manual
Please read this manual completely before attempting to install or operate this equipment! Notify carrier of damage! Inspect all
components immediately. See page 2.
Refrigerated Work Tables, Salad Tables & Freezer Bases
ION
T
A
M
R
INFO
T
N
A
T
R
USE
IMPO
E
R
O
F
E
NS!
O
I
T
C
READ B
U
NSTR
I
E
S
E
H
ET
V
A
S
E
S
PLEA
Effective Date December 2007
F18 Series Service and Installation Manual
Contents
SERIAL NUMBER LOCATION.................................................2
RECEIVING & INSPECTING...................................................2
SPECIFICATIONS............................................................... 3-5
INSTALLATION.......................................................................6
OPERATION...........................................................................6
CARE AND CLEANING...........................................................7
PRESSURE CONTROL SETTINGS..........................................7
CONDENSING UNIT ASSEMBLY........................................ 8-9
MULLION COIL ASSEMBLY (REFRIGERATED)....................10
MULLION COIL ASSEMBLY (FREEZER)...............................11
DRAWER ASSEMBLY: LOW PROFILE REFR, 2 & 3 HIGH....12
CARTRIDGE STYLE DRAWER SYSTEMS.............................13
DOOR ASSEMBLY: LOW PROFILE.......................................14
DOOR ASSEMBLY: MARK 7.................................................15
LOUVERED DOOR ASSEMBLY.............................................15
REPLACEMENT PARTS LISTS....................................... 16-19
WIRING DIAGRAMS............................................................20
TROUBLESHOOTING REFERENCE CHART...........................21
WARRANTIES................................................................ 22-23
AUTHORIZED PARTS DEPOTS.............................(back cover)
Serial Number Location
The serial number on all self-contained F18 Series refrigerated work tables and freezer bases is located on the electrical specifications tag affixed inside the compressor section
next to the pressure control.
On remote refrigerated bases with doors, the tag is inside the
unit on the coil side. On remote refrigerated bases with drawers, the tag is affixed to the drawer divider. On remote freezer
bases, the tag is located on the inside back of the unit.
Always have the serial number of your unit available when
calling for parts or service. A complete list of authorized
Delfield parts depots is shown on the back cover of this
manual.
©2007 The Delfield Company. All rights reserved. Reproduction without
written permission is prohibited. “Delfield” is a registered trademark of The
Delfield Company.
Receiving and Inspecting the Equipment
Even though most equipment is shipped crated, care should
be taken during unloading so the equipment is not damaged
while being moved into the building.
1. Visually inspect the exterior of the package an skid or
container. Any damage should be noted and reported to
the delivering carrier immediately.
2. If damaged, open and inspect the contents with the
carrier.
3. In the event that the exterior is not damaged, yet upon
opening, there is concealed damage to the equipment
notify the carrier. Notification should be made verbally as
well as in written form.
4. Request an inspection of the concealed equipment.
This should be done within 10 days from receipt of the
equipment.
5. Check the lower portion of the unit to be sure legs or
casters are not bent.
6. Also open the compressor compartment housing and
visually inspect the refrigeration package. Be sure lines
are secure and base is still intact.
7. Freight carriers can supply the necessary forms upon
request.
8. Retain all crating material until an inspection has been
made or waived.
Uncrating the Equipment
First cut and remove the banding from around the crate.
Remove the front of the crate material, use of some tools will
be required. If the unit is on legs remove the top of the crate
as well and lift the unit off the skid. If the unit is on casters it
can be "rolled" off the skid.
Delfield
™
2
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Specifications
MODEL
NUMBER
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
RECOMMENDED
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU
LOAD
EVAP. CAP.
BTU/°TD
6.99
2.56
1/5
115/60/1
3.0
383
120
Remote Refrigerated Work Tables
F18WR31
(1) 19”
F18WR39
(1) 27”
9.77
3.95
1/5
115/60/1
3.0
465
120
F18WR44
(2) 19”
11.52
5.12
1/5
115/60/1
3.0
605
120
F18WR52
(1) 19” & (1) 27”
14.31
6.51
1/5
115/60/1
3.0
686
120
F18WR60
(2) 27”
18.85
7.90
1/4
115/60/1
3.0
768
120
F18WR70
(2) 32”
20.59
9.64
1/4
115/60/1
3.0
869
120
F18WR79
(2) 27” & (1) 19”
23.05
10.29
1/4
115/60/1
6.0
1050
240
F18WR87
(3) 27”
25.83
11.85
1/4
115/60/1
6.0
1131
240
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU
LOAD
BTU
SYSTEM
MODEL
NUMBER
Self-Contained Refrigerated Work Tables
F18WC39
(1) 19”
6.99
2.56
1/5
115/60/1
8.0
383
1462
F18WC47
(1) 27”
9.77
3.95
1/5
115/60/1
8.0
465
1462
F18WC52
(2) 19”
11.52
5.12
1/5
115/60/1
8.0
605
1462
F18WC60
(1) 19” & (1) 27”
14.31
6.51
1/5
115/60/1
8.0
686
1462
F18WC68
(2) 27”
18.85
7.90
1/4
115/60/1
10.0
768
1462
F18WC78
(2) 32”
20.59
9.64
1/4
115/60/1
10.0
869
1994
F18WC87
(2) 27” & (1) 19”
23.05
10.29
1/4
115/60/1
10.0
1050
2261
F18WC95
(3) 27”
25.83
11.85
1/4
115/60/1
10.0
1131
2261
A 5-15P NEMA plug is used on self-contained units
MODEL
NUMBER
# OF
DOORS
STORAGE
CU. FT.
# OF
PANS
RECOMMENDED
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU DESIGN
BASE/RAIL
EVAP. CAP. BTU/°TD
BASE/RAIL
6
1/4
115/60/1
3.0
280/265
120/12
Remote Refrigerated Mega Top Salad Tables
F18MR31A
(1) 19”
4.11
F18MR44A
(2) 19”
6.94
6
1/4
115/60/1
3.0
444/265
120/12
F18MR44D
(2) 19”
6.94
12
1/4
115/60/1
3.0
444/529
120/22
F18MR52A
(1) 19” & (1) 27”
8.69
6
1/3
115/60/1
3.0
515/265
120/12
F18MR52D
(1) 19” & (1) 27”
8.69
12
1/3
115/60/1
3.0
515/529
120/22
F18MR52E
(1) 19” & (1) 27”
8.69
18
1/3
115/60/1
3.0
515/794
120/31
# OF
DOORS
STORAGE
CU. FT.
# OF
PANS
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU DESIGN
BASE/RAIL
BTU SYSTEM CAP.
BASE/RAIL
MODEL
NUMBER
Self-Contained Refrigerated Mega Top Salad Tables
F18MC39A
(1) 19”
4.11
6
1/4
115/60/1
10.0
280/265
1903/925
F18MC39D
(1) 19”
4.11
12
1/4
115/60/1
10.0
280/529
1903/1156
F18MC52A
(2) 19”
6.94
6
1/4
115/60/1
10.0
444/265
1903/925
F18MC52D
(2) 19”
6.94
12
1/4
115/60/1
10.0
444/529
1903/1156
1903/1321
F18MC52E
(2) 19”
6.94
18
1/4
115/60/1
10.0
444/794
F18MC60A
(1) 19” & (1) 27”
8.69
6
1/4
115/60/1
10.0
515/265
2314/864
F18MC60D
(1) 19” & (1) 27”
8.69
12
1/4
115/60/1
10.0
515/529
2314/1141
F18MC60E
(1) 19” & (1) 27”
8.69
18
1/4
115/60/1
10.0
515/794
2314/1361
F18MC60F
(1) 19” & (1) 27”
8.69
24
1/4
115/60/1
10.0
515/1058
2314/1540
A 5-15P NEMA plug is used on self-contained units
Delfield
™
®
3
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
3
F18 Series Service and Installation Manual
Specifications
MODEL
NUMBER
# OF
DOORS
SHELF AREA
SQ. FT.
# OF
PANS
RECOMMENDED
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU DESIGN
BASE/RAIL
EVAP. CAP.
BTU/°TD
Remote Refrigerated Salad Top Tables
F18SR31A
(1) 19”
2.56
6
1/4
115/60/1
3.0
280/265
120
F18SR44A
(2) 19”
5.12
6
1/4
115/60/1
3.0
491/441
120
F18SR44B
(2) 19”
5.12
8
1/4
115/60/1
3.0
491/441
120
F18SR44C
(2) 19”
5.12
10
1/4
115/60/1
3.0
491/441
120
F18SR52A
(1) 19” & (1) 27”
6.51
6
1/4
115/60/1
3.0
532/529
120
F18SR52B
(1) 19” & (1) 27”
6.51
8
1/4
115/60/1
3.0
532/529
120
F18SR52C
(1) 19” & (1) 27”
6.51
10
1/4
115/60/1
3.0
532/529
120
F18SR52D
(1) 19” & (1) 27”
6.51
12
1/4
115/60/1
3.0
532/529
120
# OF
DOORS
SHELF AREA
SQ. FT.
# OF
PANS
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU DESIGN
BASE/RAIL
BTU SYSTEM CAP.
BASE/RAIL
MODEL
NUMBER
Self-Contained Refrigerated Salad Top Tables
F18SC39A
(1) 19”
2.56
6
1/4
115/60/1
10.0
280/265
1903/745
F18SC39B
(1) 19”
2.56
8
1/4
115/60/1
10.0
280/353
1903/867
F18SC52A
(2) 19”
5.12
6
1/4
115/60/1
10.0
444/265
1903/745
F18SC52B
(2) 19”
5.12
8
1/4
115/60/1
10.0
444/353
1903/867
F18SC52C
(2) 19”
5.12
10
1/4
115/60/1
10.0
444/441
1903/971
F18SC52D
(2) 19”
5.12
12
1/4
115/60/1
10.0
444/529
1903/1061
F18SC60A
(2) 19” & (1) 27”
6.51
6
1/4
115/60/1
10.0
515/265
2314/667
F18SC60B
(2) 19” & (1) 27”
6.51
8
1/4
115/60/1
10.0
515/353
2314/798
F18SC60C
(2) 19” & (1) 27”
6.51
10
1/4
115/60/1
10.0
515/441
2314/916
F18SC60D
(2) 19” & (1) 27”
6.51
12
1/4
115/60/1
10.0
515/529
2314/1023
# OF
PANS
RECOMMENDED
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU DESIGN LOAD
BASE/RAIL
EVAP. CAP.
BTU/°TD
A 5-15P NEMA plug is used on self-contained units
MODEL
NUMBER
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
Remote Refrigerated Reduced Height Rail
F18DR44
(2) 19”
9.49
5.12
10
1/4
115/60/1
3.0
547/441
120/19
F18DR52
(1) 19” & (1) 27”
11.81
6.51
12
1/3
115/60/1
3.0
625/529
120/23
F18DR60
(2) 27”
14.14
7.9
16
1/3
115/60/1
5.0
703/617
120/26
F18DR70
(2) 32”
17.05
9.64
18
1/2
115/60/1
5.0
800/794
120/32
F18DR79
(1) 19” & (2) 27”
18.68
10.29
18
1/2
115/60/1
5.0
962/882
240/36
F18DR87
(3) 27”
21.30
11.85
22
3/4
115/60/1
5.0
1032/970
240/39
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
# OF
PANS
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU LOAD
BASE/RAIL
BTU SYSTEM CAP.
BASE/RAIL
MODEL
NUMBER
Self-Contained Refrigerated Reduced Height Rail
F18DC52
(2) 19”
9.49
5.12
12
1/4
115/60/1
10.0
547/529
1903/1061
F18DC60
(1) 19” & (1) 27”
11.81
6.51
14
1/3
115/60/1
12.0
625/617
2314/1121
F18DC68
(2) 27”
14.14
7.9
18
1/3
115/60/1
12.0
703/794
2314/1544
F18DC82
(2) 32”
17.05
9.64
20
1/2
115/60/1
14.0
800/882
3097/1648
F18DC91
(1) 19” & (2) 27”
18.68
10.29
22
1/2
115/60/1
14.0
962/1058
3807/1839
F18DC99
(3) 27”
21.30
11.85
24
3/4
115/60/1
16.0
1032/1147
5286/2191
A 5-15P NEMA plug is used on F18RC52, F18RC60 & F18RC68 . A 5-20P NEMA plug is used on , F18RC82, F18RC91, & F18RC99.
Delfield
™
4
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Specifications
MODEL
NUMBER
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
# OF
PANS
RECOMMENDED
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU DESIGN LOAD
BASE/RAIL
EVAP. CAP.
BTU/°TD
Remote Refrigerated Reduced Height Rail
F18RR44
(2) 19”
9.49
5.12
10
1/4
115/60/1
3.0
547/441
120/19
F18RR52
(1) 19” & (1) 27”
11.81
6.51
12
1/3
115/60/1
3.0
625/529
120/23
F18RR60
(2) 27”
14.14
7.9
16
1/3
115/60/1
5.0
703/617
120/26
F18RR70
(2) 32”
17.05
9.64
18
1/2
115/60/1
5.0
800/794
120/32
F18RR79
(1) 19” & (2) 27”
18.68
10.29
18
1/2
115/60/1
5.0
962/882
240/36
F18RR87
(3) 27”
21.30
11.85
22
3/4
115/60/1
5.0
1032/970
240/39
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
# OF
PANS
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU LOAD
BASE/RAIL
BTU SYSTEM CAP.
BASE/RAIL
MODEL
NUMBER
Self-Contained Refrigerated Reduced Height Rail
F18RC52
(2) 19”
9.49
5.12
12
1/4
115/60/1
10.0
547/529
1903/1061
F18RC60
(1) 19” & (1) 27”
11.81
6.51
14
1/3
115/60/1
12.0
625/617
2314/1121
F18RC68
(2) 27”
14.14
7.9
18
1/3
115/60/1
12.0
703/794
2314/1544
F18RC82
(2) 32”
17.05
9.64
20
1/2
115/60/1
14.0
800/882
3097/1648
F18RC91
(1) 19” & (2) 27”
18.68
10.29
22
1/2
115/60/1
14.0
962/1058
3807/1839
F18RC99
(3) 27”
21.30
11.85
24
3/4
115/60/1
16.0
1032/1147
5286/2191
A 5-15P NEMA plug is used on F18RC52, F18RC60 & F18RC68 . A 5-20P NEMA plug is used on , F18RC82, F18RC91, & F18RC99.
MODEL
NUMBER
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
RECOMMENDED
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU
LOAD
EVAP. CAP.
BTU/°TD
(1) 19”
5.58
2.56
1/3
115/60/1
10.0
943
160
F18FR50
(2) 19”
12.21
5.12
1/2
115/60/1
10.0
1471
160
F18FR58
(1) 19” & (1) 27”
15
6.51
3/4
115/60/1
10.0
1844
160
F18FR66
(2) 27”
17.79
7.9
3/4
115/60/1
10.0
2020
160
F18FR76
(2) 32”
21.28
9.64
3/4
115/60/1
10.0
2437
160
# OF
DOORS
STORAGE
CU. FT.
SHELF AREA
SQ. FT.
HORSE POWER
VOLTS/HERTZ/
PHASE
AMPS
BTU
LOAD
EVAP. CAP.
BTU/°TD
Remote Freezer Base
F18FR35
MODEL
NUMBER
Self-Contained Freezer Base
F18FC43
(1) 19”
5.58
2.56
1/3
115/60/1
10.0
943
1558
F18FC62
(2) 19”
12.21
5.12
1/2
115/60/1
12.0
1471
1776
F18FC70
(1) 19” & (1) 27”
15
6.51
3/4
115/60/1
16.0
1647
2713
F18FC78
(2) 27”
17.79
7.9
3/4
115/60/1
16.0
1824
2713
F18FC88
(2) 32”
21.28
9.64
3/4
115/60/1
16.0
2045
2713
A 5-15P NEMA plug is used on F18FC43 & F18FC62. A 5-20P NEMA plug is used on F18FC70, F18FC78 & F18FC88.
Delfield
™
®
5
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
5
F18 Series Service and Installation Manual
Installation
Location
Be sure the location chosen has a floor strong enough to
support the total weight of the cabinet and contents. A
fully loaded 72” long model may weigh as much as 1500
pounds! Reinforce the floor as necessary to provide for
maximum loading.
It is very important to allow for proper air flow, both
inside and outside.
Avoid hot corners and locations near stoves, ovens and
other pieces of cooking equipment.
It is recommended that the unit be installed
no closer than 1” from any wall. Do not install
the unit near any combustible material or
object affected by heat or moisture.
Leveling
A level cabinet looks better and will perform better
because the drain pan will drain properly, the doors will
line up with the frames properly, and the cabinet will not
be subject to undue strain.
A unit on legs will have an adjustable bullet foot on each
leg, adjust each for a level unit. A unit on casters will not
be adjustable. Be sure the unit is on a level floor, make
necessary changes to the floor for proper level.
Lock all front casters to ensure the stability of the unit.
Plumbing
Self-contained models are standard with a condensate
evaporator. If, for some reason a unit does not have a
condensate evaporator, or if the evaporator fails, the unit’s
drain must have an outlet to an appropriate drainage area or
container. A refrigerated rail will have a 1" drain which will
need to be run to an appropriate floor drain or container.
The drain will be stubbed to the bottom of the machine
compartment. Either run drain to a floor drain or add a valve
to the base of the machine compartment and drain the rail to a
container when convenient. The LiquiTec option will NOT have
a drain available.
Moisture collecting from improper drainage can
create a slippery surface on the floor and a hazard
to employees. It is the owner’s and operator’s
responsibility to provide a container or outlet for
CAUTION drainage.
Electrical connection
Refer to the amperage data on pages 3-5, the serial tag, your
local code or the National Electrical Code to be sure the unit is
connected to the proper power source. A protected circuit of
the correct voltage and amperage must be run for connection
of the line cord, or permanent connection of the unit.
Self-contained units with a cord and plug have an ON/OFF
switch located directly behind the louvered panel covering
the compressor section. Simply turn the switch to ON to
begin operation.
The power switch must be turned to OFF and
the unit disconnected from the power source
whenever performing service or maintenance
functions.
Never operate the unit without the louvered panel
in place!
If electrical receptacles are to be mounted in the unit’s
backsplash, they must be wired independently from the
existing unit wiring.
Operation
After turning the ON/OFF switch to ON the unit’s compressor
will begin operating. Delfield refrigerated bases are designed
to maintain an operational temperature of 36°F to 40°F.
Temperature in the salad top and refrigerated rail opening is
33°F to 41°F with pans recessed 3” on a standard wrapped
refrigerated rail or flush with the LiquiTec option at 86°F
ambient room temperature. Freezer bases are designed to
maintain an operational temperature of 0°F.
Do not place hot pans on/against the blue ABS
liner. Do not throw items into the storage area.
Failure to heed these recommendations could
result in damage to the interior of the cabinet or
to the blower coil.
Overloading the storage area, restricting the air flow, and
continuous opening and closing of the doors and drawers
will hamper the units ability to maintain operational
temperature.
Refrigerated rail units
Product in the rail should be removed to the refrigerated base
at the end of the day. This allows you to turn the
rail off at night to save energy and the rail will have
time to defrost as needed. It also helps maintain
product quality. The standard wrapped refrigerated
units are controlled by the pressure control which
is set to maintain the proper rail temperature an on/off switch
is also provided for the rail and is required to be shut off at
night. The rail switch shuts off the rail only. With a LiquiTec
rail a thermostat is provided to maintain rail temperature as
well as the rail on/off switch. The LiquiTec rail is required to
be shut off at night as well to allow for defrosting. To ensure
product quality in the rail it is recommended that product be
rotated every four hours.
If adding any item to the unit, be sure to keep
in mind the location of the refrigeration lines on
wrapped rail units. A refrigeration leak in a rail
is extremely difficult and costly to repair. In some
cases it cannot be repaired at all.
Delfield
™
6
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Care and Cleaning
Cleaning the cabinet
Cleaning door gaskets
The interior and exterior can be cleaned using soap and warm
water. If this is not sufficient, try ammonia and water or nonabrasive liquid cleaner. When cleaning the exterior, always rub
with the “grain” of the stainless steel to avoid marring the finish. Do not use an abrasive cleaner because it will scratch the
stainless steel and plastic.
Door gaskets should be cleaned as required to maintain their
ability to seal properly. Do not use sharp tools or knives to
scrape the bellows as this may tear the gasket and eliminate
its ability to seal. A soft bristle brush and solution of soap and
water should be all that is required to keep the gaskets clean.
Do not use full strength degreasing agents on the gasket
because they could cause the gasket to become brittle and
crack.
Consistent cleaning of the coil will enhance the
operation of the unit by reducing energy consumption as well as extend the life of the compressor.
The interior of the cabinet should be cleaned daily with a nonabrasive cleaner and a nonabrasive pad. If necessary, a mild
abrasive may be used on the interior of the pans only. Never
use steel wool. No drains are provided with rails, after defrosting water will accumulate in the rail. This will need to be
cleaned out thoroughly before restarting the rail as it will freeze
and severely reduce the efficiency of the rail.
Cleaning the condenser
In order to maintain proper refrigeration performance, the
condenser fins must be cleaned of dust, dirt and
grease regularly. It is recommended that this be
done at least every three months. If conditions
are such that the condenser is totally blocked
in three months, the frequency of cleaning should be
increased. Clean the condenser with a vacuum cleaner or
stiff brush. If extremely dirty, a commercially available condenser cleaner may be required.
Preventing blower coil corrosion
To help prevent corrosion of the blower coil, store all acidic
items, such as pickles and tomatoes, in sealable containers.
Immediately wipe up all spills of items.
Pressure Control Settings
Factory recommended low-pressure control settings are:
HFC-404A refrigerators: 85# cut-in and 65# cut-out to
maintain approximate interior
temperature of 38°F.
Differential setting of 20#.
HFC-404A freezers: 3 2# cut-in and 8# cut-out to
maintain approximate interior
temperature of 0°F to 5°F.
Differential setting of 24#.
HFC-404A refrigerators with LiquiTec Rail:
20# cut-in and 10# cut-out to
Differential setting of 10#
Temperature control for
LiquiTec Rail, 25°F cut in and
18°F cut-out.
Pressure control settings are measured in
pounds, not fahrenheit.
Delfield
™
®
7
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
7
F18 Series Service and Installation Manual
Coil Assembly - refrigerators
11
6
12
2
3
10
8
4
5
13
7
DELFIELD
PART#
DESCRIPTION
1
PMK00036
pan, drip, evap. coil, refg.
2
AMK00012
coil back
3
AMK00011
coil side
4
SMK00285
bracket, mounting, fan, evap, coil
5
3516173
guard, fan, 6.38” dia., lexan
6
3516095
coil, evap.
KEY
9
1
3
7
AMK00013
coil front
8
3516172
blade, fan 5.56, CCW, lexan, clear
9
2162691
motor, fan, 115V
10
3516273
valve, expansion, 1/4, hi, R-404A
11
3516103
solenoid coil
12
3516102
solenoid valve
13
2194536
thermostat
XMK00107 EVAPORATOR COIL ASSEMBLY
Coil assembly is standard with above parts, less solenoid coil, solenoid valve
and thermostat.
Unit: F18WC
XMK00108 EVAPORATOR COIL ASSEMBLY
Coil assembly is standard with above parts less the thermostat.
Unit: F18DC91 & 99; F18DR79 & 97; F18RC91 & 99; F18WR79 & 87
XMK00109 EVAPORATOR COIL ASSEMBLY
Coil assembly is standard with above parts less the thermostat.
Unit: all other refrigeration units, except those listed for XMK00107. This
assembly is also used in conjunction with units listed for XMK00108.
Delfield
™
8
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Mullion Coil Assembly: Freezers
AIR
FLOW
10
11
8
12
9
2
7
3
‡
4
5
‡
16
1
13
KEY
1
Used on: F18FC and F18FR
DELFIELD
PART#
DESCRIPTION
SMK00162
pan, drip, freezer mullion coil
‡
AMK00004
back, evap housing
2
AMK00002
side, evap. hsng., LH
3
AMK00005
bracket, fan motor, blower coil
4
3516073
coil, evap., freezer
5
2194034
heater, defrost
‡
AMK00000
front, evap housing
6
2183310
harness, coil, freezer, male
7
2162691
motor, fan, 115V, 50/60
8
3516173
guard, fan, 6.38” dia, lexan
9
3516172
blade, fan, 5.56, CCW, lexan
10
9321353
screw, #10x0.50
11
9321353
screw, machine, #10
12
9321238
screw, #8x.75
13
9321131
screw #10 x .50
14
3516271
valve, expansion, 1/4, low, R-4040A
15
2194046
control, limit, fan delay/defrst (not shown)
16
Need to order drip pan to get 1” s/s drain (not shown)
Delfield
™
®
2
NOTE: Non-numbered items with ”‡” not
sold separately — available only with complete assembly — XMK00061.
9
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
9
F18 Series Service and Installation Manual
Low Profile
Refrigerated Drawer
Assembly (32” Shown)
1
7
2
4
6 11
5
3
See page 13 for part numbers.
2 High-Mark 7
Refrigerated Drawer
Assembly (32” Shown)
1
2
4
7
5
6
11
3
See page 13 for part numbers.
3 High-Mark 7
Refrigerated Drawer
Assembly (32” Shown)
8
1
2
9
4
10
11
5
6
3
See page 13 for part numbers.
Delfield
™
10
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Cartridge Style Drawer Systems
See page 12 for blow-out model diagram.
Refrigerator
*Cartridge assy
Freezer
*Cartridge assy
1
Cartridge only Drawer box
(no fronts, no mullions)
2
Divider
Bar(s)
3
Intermediate
Left Track
4
Intermediate
Right Track
32" lo profile
27" lo profile
24" lo profile
19" lo profile
000-aew-0030
000-aew-0031
000-aew-0032
000-aew-0033
000-aew-003a
000-aew-003b
000-aew-003c
000-aew-003d
RF700100
RF700101
RF700102
RF700103
000-333-0034
000-333-0035
000-333-0036
000-333-0037
264-018-0032, 264-018-0034
264-018-0033
264-018-0036, 264-018-0037
**264-018-0038
3234504
3234517
3234504
3234504
3234492
3234509
3234492
3234492
32" 3 high mk7
27" 3 high mk7
24" 3 high mk7
19" 3 high mk7
000-aew-0034
000-aew-0035
000-aew-0036
000-aew-0037
000-aew-003e
000-aew-003f
000-aew-003g
000-aew-003h
RF700104
RF700105
RF700106
RF700107
000-333-0034
000-333-0035
000-333-0036
000-333-0037
264-018-0032, 264-018-0034
264-018-0033
264-018-0036, 264-018-0037
**264-018-0038
3234504
3234517
3234504
3234504
3234492
3234509
3234492
3234492
32" 2 high mk7
27" 2 high mk7
24" 2 high mk7
19" 2 high mk7
000-aew-0038
000-aew-0039
000-aew-0040
000-aew-0041
000-aew-003i
000-aew-003j
000-aew-003k
000-aew-003l
RF700108
RF700109
RF700110
RF700111
000-333-0034
000-333-0035
000-333-0036
000-333-0037
264-018-0032, 264-018-0034
264-018-0033
264-018-0036, 264-018-0037
**264-018-0038
3234504
3234517
3234504
3234504
3234492
3234509
3234492
3234492
5
6
7
8
9
10
11
32" low profile
27" low profile
24" low profile
19" low profile
Refrigerator
Mullion
000-315-0033
000-315-0032
000-315-0031
000-315-0030
Freezer
Mullion
000-315-003b
000-315-003a
000-315-0039
000-315-0038
Drawer front
assy
000-328-0033
000-328-0032
000-328-0031
000-328-0030
Drawer front
assy, top
na
na
na
na
Drawer front
assy,middle
na
na
na
na
Drawer front
assy, bottom
na
na
na
na
Gasket
1701197
1701196
1701195
1701194
32" 3 high mk7
27" 3 high mk7
24" 3 high mk7
19" 3 high mk7
000-315-0033
000-315-0032
000-315-0031
000-315-0030
000-315-003b
000-315-003a
000-315-0039
000-315-0038
na
na
na
na
000-328-0037
000-328-0036
000-328-0035
000-328-0034
000-328-0033
000-328-0032
000-328-0031
000-328-0030
000-328-003b
000-328-003a
000-328-0039
000-328-0038
1701197
1701196
1701195
1701194
32" 2 high mk7
27" 2 high mk7
24" 2 high mk7
19" 2 high mk7
000-315-0037
000-315-0036
000-315-0035
000-315-0034
000-315-003f
000-315-003e
000-315-003d
000-315-003c
000-327-0033
000-327-0032
000-327-0031
000-327-0030
na
na
na
na
na
na
na
na
na
na
na
na
1701193
1701192
1701191
1701190
*Complete cartridge assembly includes: cartridge, drawer boxes, drawer fronts, and mullion.
**264-018-0038: Divider bar can also be used in all drawer boxes for 1/6 size pan applications.
Delfield
™
®
11
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
11
F18 Series Service and Installation Manual
Door Assembly: Low Profile
1
6
5
Low Profile
KEY
4
1
2
DELFIELD
PART#
DESCRIPTION
XMK00005
complete door assy. 19”, 18.75” x 15.72”
XMK00006
complete door assy. 24", 23.75" x 15.72"
XMK00007
complete door assy. 27”, 26.75” x 15.72”
1701187
gasket, door, 19”
1701188
gasket, door 24"
1701189
gasket, door, 27”
handle, snap-in, 7” (not replaceable)
2
5
6
3
3234214
hinge, door, top/LH, bottom/RH
4
3234218
hinge, door, top/RH, bottom/LH
5
3234391
hinge, door, L-shaped
6
9321107
bushing, nylon, hinge pin
Used on: F18SC, F18SR, F18MC & F18MR
NOTE: Indicate if door is left or right hinged when
ordering.
3
Delfield
™
12
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Door Assembly: Mark 7
6
1
5
Mark 7
KEY
4
2
1
5
6
DELFIELD
PART#
DESCRIPTION
XMK00001
complete door assy. 19”, 18.75” x 25.72”
XMK00002
complee door assy. 24", 23.75” x 25.72”
XMK00003
complete door assy. 27”, 26.75” x 25.72”
XMK00004
complete door assy. 32”, 31.75” x 25.72”
1701183
gasket, door, 19”
1701184
gasket, door 24"
1701185
gasket, door, 27”
1701186
gasket, door, 32”
2
3234255
handle, snap-in, 7”
3
3234072
hinge, door, top/LH, bottom/RH
4
3234073
hinge, door, top/RH, bottom/LH
5
3234391
hinge, door, L-shaped
6
9321107
bushing, nylon, hinge pin
Used on: F18WR, F18WC, F18FC, F18FR, F18DR, F18RC &
F18RR
NOTE: Indicate if door is left or right hinged when
ordering.
3
Louvered Door Assembly
3
4
5
KEY
1
1
DELFIELD
PART#
DESCRIPTION
XMK00118
complete louvered door assembly, 14”
XMK00120
complete louvered door assembly, 18”
SMK00507
front, door, 14”
SMK00446
front, door, 18”
2
3234073
hinge, door, top/RH, bottom/LH
3
3234072
hinge, door, top/LH, bottom/RH
4
3234391
hinge, door, L-shaped
5
9321107
bushing, nylon, hinge pin
6
SMK00771
bracket, magnetic catch (not shown)
7
3234156
catch, magnetic, snap-in (not shown)
8
3234191
strike, steel (not shown)
Used on: F18SC, F18SR, F18MC, F18MR, F18DC, F18DR,
F18RC & F18RR
KEY
4
5
DELFIELD
PART#
DESCRIPTION
NOT SHOWN - Clip on style louver
SMK00039
13.94" x 26.34"
SMK00041
17.94" x 26.34"
Used on: F18FC, F18WR,
2
Delfield
™
®
13
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
13
F18 Series Service and Installation Manual
PARTS LISTING
For component parts:
Condensing units - see page 8
Evaporator assy. - see pages 10-11
Door and drawer assy. - see 12 thru 15.
F18DC SERIES
STANDARD PARTS
1701000 Cutting Board Pin Cap
2183348 Cord/plug assembly
2190154 On/Off Switch
2193927 Low pressure control
3234266 Pan cover hinge - right
3234282 Pan cover hinge Ð left
3234290 Support shelf plastic
3234392 Double hinge pan cover
3234645 Leg
3516135 Thermometer
3516101 Filter dryer
3516225 Expansion valve - Rail
9321041 Acorn Nut for pan cover hinge
9321132 Dog point stud
9321136 Cutting Board Pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18DC52
000-402-0045 Removable hinged 12 pan cover
XMK00001 19” Door Assembly
XMK00109 Evaporator Coil Assembly
XMK00118 Complete Louver Assembly
3977984 Wire shelf
F18DC60
000-402-003T Removable hinged 6 pan cover
000-402-003X Removable hinged 8 pan cover
SMK00776 Center divider bar
XMK00001 19” Door Assembly
XMK00003 27” Door Assembly
XMK00109 Evaporator Coil Assembly
XMK00118 Complete Louver Assembly
3977984 Wire shelf 19”
3978014 Wire shelf 27”
F18DC68
000-402-003X Removable hinged 8 pan cover
XMK00003 27” Door Assembly
XMK00109 Evaporator Coil Assembly
XMK00118 Complete Louver Assembly
3234392 Double hinge pan cover
3978014 Wire shelf 27”
F18DC72
000-402-003X Removable hinged 8 pan cover
000-402-0041 Removable hinged 10 pan cover
XMK00003 27” Door Assembly
XMK00109 Evaporator Coil Assembly
XMK00120 Complete Louver Assembly
3978014 Wire shelf 27”
F18DC82
SMK00776 Center divider bar
000-402-0041 Removable hinged 10 pan cover
XMK00004 32” Door Assembly
XMK00109 Evaporator Coil Assembly
XMK00120 Complete Louver Assembly
3977983 Wire shelf 32”
F18DC91
000-402-0041 Removable hinged 10 pan cover
000-402-0045 Removable hinged 12 pan cover
XMK00001 19” Door Assembly
XMK00003 27” Door Assembly
XMK00108 Evaporator Coil assy. W/ Solenoid
XMK00109 Evaporator Coil Assembly
XMK00120 Complete Louver Assembly
3977984 Wire shelf 19”
3978014 Wire Shelf 27”
F18DC99
SMK00776 Center divider bar
000-402-0045 Removable hinged 12 pan cover
XMK00003 27” Door Assembly
XMK00108 Evaporator Coil assy. W/ Solenoid
XMK00109 Evaporator Coil Assembly
XMK00120 Complete Louver Assembly
3978014 Wire Shelf 27”
F18DR SERIES
STANDARD PARTS
1701000 Cutting board pin
2190154 Rocker switch
2194201 Rail Thermostat
3234282 Left end pan cover hinge
3234266 Right end pan cover hinge
3234392 Double (center) hinge pan cover
3234290 Plastic support shelf
3234645 Leg
3516101 Filter dryer
3516102 Solenoid valve
3516135 Thermometer
3516225 Expansion valve (rail)
9321041 Acorn Nut for Salad pan Cover pin
9321132 Long dog-point stud
9321136 Cutting board pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18DR44
000-402-0041 Removable hinged 12 pan cover
XMK00001 19” Door Assembly
XMK00009 Evaporator Coil Assembly
3977984 19” Wire Shelf
F18DR52
000-402-0045 Removable hinged 12 pan cover
XMK00001 19” Door Assembly
XMK00003 27” Door Assembly
XMK00109 Evaporator Coil Assembly
3977984 19” Wire shelf
3978014 27” Wire Shelf
F18DR60
SMK000776 Center divider bar
000-402-003T Removable hinged 6 pan cover
000-402-003X Removable hinged 8 pan cover
XMK00003 27” Door Assembly
XMK00109 Evaporator Coil Assembly
3978014 Wire shelf 27”
F18DR70
000-402-003X Removable hinged 8 pan cover
XMK00004 32” Door Assembly
XMK00109 Evaporator Coil Assembly
3977983 Wire shelf 32”
F18DR79
SMK00776 Center divider bar
000-402-0041 Removable hinged 10 pan cover
XMK00001 19” Door Assembly
XMK00003 27” Door Assembly
XMK00108 Evaporator Coil Assembly w/solenoid
XMK00109 Evaporator Coil Assembly
3977984 19” wire shelf
3978014 27” wire shelf
F18DR87
SMK00776 Center divider bar
000-402-0041 Removable hinged 10 pan cover
000-402-0045 Removable hinged 12 pan cover
XMK00003 27” Door Assembly
XMK00108 Evaporator Coil Assembly w/solenoid
XMK00109 Evaporator Coil Assembly
3977984 Wire shelf 19”
3978014 Wire Shelf 27”
F18FC SERIES
STANDARD PARTS
XMK00061 Coil assembly freezer
XMK00065 Evap. condensate pan and heater
2193927 Low pressure control
2194046 Fan delay/defrost control limit
2194199 Heating cond. evap. element
2194151 Defrost timer
2194235 Heater safety switch
3234290 Plastic support shelf
3234645 Leg
3516101 Filter dryer
3516135 Thermometer
9321040 Spot stud
9321132 Long dog-point stud
ADDITIONAL PARTS
F18FC43 SERIES
SMK00039 Clip on Louver
XMK00001 19” Door Assembly
2183348 Cord plug assy.
3977984 Shelf 19”
F18FC62 SERIES
SMK00039 Louver Assembly
XMK00001 19” Door Assembly
2183348 Cord plug assy.
3977984 19” Wire shelf
F18FC70 SERIES
SMK00041 Louver Door Assembly
XMK00001 19” Door Assembly
XMK00003 27” Door Assembly
2183347 Cord/Plug Assembly
3977984 19” Wire shelf
3978014 27” Wire shelf
F18FC78 SERIES
SMK00041 Louver Assembly
XMK00003 27” Door Assembly
2183347 Cord/Plug Assembly
3978014 Wire shelf
Delfield
™
14
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
F18FC88 SERIES
SMK00041 Louver Assembly
XMK00004 32” Door Assembly
2183347 Cord/Plug Assembly
3977983 Wire shelf
F18FR SERIES
STANDARD PARTS
XMK00061 Coil assembly freezer
2194046 Fan delay/defrost control limit
2194151 Defrost timer
2194235 Heater safety switch
3234290 Plastic support shelf
3234645 Leg
3516135 Thermometer
9321040 Spot stud
9321132 Long dog-point stud
F18MC52D Series
000-402-003I 12 Pan Cover
XMK00005 19” Lo Profile Door Assembly
F18MC52E Series
00-402-003K 18 Pan Cover
XMK00005 19” Lo Profile Door Assembly
F18MC60A Series
000-402-003G 6 Pan Cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 Ð 32” Door Assembly
F18MC60D Series
XMK00005 19” Lo Profile Door Assembly
XMK00007 Ð 32” Door Assembly
000-402-003I 12 Pan Cover
ADDITIONAL PARTS
F18FR35 and F18FR50 SERIES
XMK00001 Door Assembly
3977984 19” Wire shelf
F18MC60E Series
000-402-003K 18 Pan Cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 Ð 32” Lo Profile Door Assembly
F18FR58 Series
XMK00001 19” Door Assembly
XMK00003 27” Door Assembly
3977984 19” Wire shelf
3978014 27” Wire shelf
F18MR SERIES
STANDARD PARTS
XMK00109 Evaporator Coil Assembly
1701000 Cutting board pin cap
2190154 On/Off switch
2194201 Thermostat rail
3234266 Right end pan cover hinge
3234282 Left end pan cover hinge
3234392 Double (Center) cover hinge
3234645 Leg
3516135 Thermometer
3516225 Expansion valve
9321136 Holding for cutting board pin
9321374 Salad pan cover pin hinge
9321041 Chrome plated acorn nut
ADDITIONAL PARTS
F18MR31A & F18MR44A
000-402-003G 6 Pan Cover
XMK00005 19” Lo Profile Door Assembly
F18FR66 SERIES
XMK00004 32” Door Assembly
3977983 32” Wire shelf
F18FR76 SERIES
XMK00004 32” Door Assembly
3977983 32” Wire Shelf
F18MC SERIES
STANDARD PARTS
XMK00005 19” Lo Profile Door Assembly
XMK00109 Evaporator Coil Assembly
XMK00118 Louver Assembly
2183348 Cord/plug assy.
2190154 On/Off Switch
2193927 Low pressure control
3234266 Right end pan cover hinge
3234282 Left end pan cover hinge
3234392 Double (center) hinge pan cover
3234645 Leg
3516101 Filter dryer
3516135 Thermometer
9321041 Chrome plated acorn nut
9321136 Holding for cutting board pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18MC39A Series
000-402-003G 6 Pan Cover
XMK00005 19” Lo Profile Door Assembly
F18MC39D Series
000-402-003I 12 Pan Cover
XMK00005 19” Lo Profile Door Assembly
F18MC52A Series
000-402-003G 6 Pan Cover
XMK00005 19” Lo Profile Door Assembly
Delfield
™
®
F18MR44D
000-402-003I 12-pan hinged removable cover
XMK00005 19” Lo Profile Door Assembly
F18MR52A & F18MR52D
000-402-003G Hinged Removable 6 pan Cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo Profile Door Assembly
F18MR52E
000-402-003K 18-pan hinged removable cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo Profile Door Assembly
F18RC SERIES
STANDARD PARTS
1701000 Cutting board pin
2190154 On/Off switch
2193927 Pressure control
3234266 Right pan cover end hinge
3234282 Left pan cover end hinge
3234290 Plastic plug shelf support
3234392 Double (Center) cover hinge
3234645 Leg
3516101 Filter dryer
3516135 Hanging 4” thermometer
3516225 Expansion valve
9321040 Stud spot
9321041 Chrome plated acorn nut
9321132 Long stud dog-point
9321136 Holding for cutting board pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18RC52
000-402-0045 Hinged Removable Cover
XMK00001 19” Door Assembly
XMK00109 Evaporator Coil Assembly
XMK00118 Louver Assembly
2183348 Cord/plug assembly
3977984 Wire shelf 19”
F18RC60
000-402-003X 8-pan hinged removable cover
000-402-003T 6-pan hinged removable cover
SMK00776 Center divider bar
XMK00001 19” Door Assembly
XMK00003 27” Door Assembly
XMK00109 Evaporator Assembly
XMK00118 Louver Assembly
2183348 Cord/plug assembly
3977984 19” Wire Shelf
3978014 27” Wire Shelf
F18RC68
000-402-003X 8-pan hinged removable cover
000-402-003T 6-pan hinged removable cover
SMK00776 Center divider bar
XMK00003 27” Door Assembly
XMK00109 Evaporator Assembly
XMK00118 Louver Assembly
2183348 Cord/plug assembly
3978014 27” Wire Shelf
F18RC72
000-402-0041 10-pan hinged removable cover
000-402-003X 8-pan hinged removable cover
XMK00003 27” Door Assembly
XMK00109 Evaporator Assembly
XMK00120 Louver Assembly
2183347 Cord/Plug Assembly
3978014 27” Wire Shelf
F18RC82
000-402-0041 10-pan hinged removable cover
XMK00004 32” Door Assembly
XMK00109 Evaporator Assembly
XMK00120 Louver Assembly
2183347 Cord/Plug Assembly
3977983 32” Wire Shelf
15
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
15
F18 Series Service and Installation Manual
F18RC91 000-402-0041 10-pan hinged removable cover
000-402-0045 12-pan hinged removable cover
XMK00003 27” Door Assembly
XMK00108 Evaporator Assembly
XMK00109 Evaporator Assembly
XMK00120 Louver Assembly
2183347 Cord/Plug Assembly
3978014 27” Wire Shelf
F18RR SERIES
STANDARD PARTS
XMK00109 Evaporator Coil Assembly
1701000 Cutting board pin
2190154 Rocker switch
3234266 Right end pan cover hinge
3234282 Left end pan cover hinge
3234290 Plastic plug shelf support
3234292 Double pan cover hinge
3234645 Leg
3516103 Solenoid coil spade term.
3516102 Solenoid valve
3516135 Hanging 4” thermometer
9321040 Stud spot
9321041 Acorn Nut for Pan cover hinge
9321132 Long stud dog-point
9321374 Salad pan cover hinge pin
ADDITIONAL PARTS
F18RR44 SERIES
000-402-0041 Removable 10-pan hinged cover
XMK00001 19” Door Assembly
XMK00109 Evaporator Coil Assembly
2194201 Rail Thermostat
3977984 Wire shelf 19”
F18RR52 SERIES
000-402-0045 Removable 12-pan hinged cover
XMK00001 Door assembly 19”
XMK00003 Door assembly 27”
2194201 Rail Thermostat
3977984 Wire shelf 19”
3978014 Wire shelf 27”
F18RR60 SERIES
000-402-003X Removable 8-pan hinged cover
SMK00776 Center divider bar
XMK00003 27” door assy.
3978014 27” Wire Shelf
F18SC SERIES
STANDARD PARTS
XMK00109 Coil assembly solenoid
XMK00118 Louver Assembly
1701000 Cutting board pin
2190154 on/off switch
2194201 Rail Thermostat
2194536 Thermostat
3234266 Right pan cover end hinge
3234282 Left end pan cover hinge
3234392 Double (Center) pan hinge
3234645 Leg
3516135 Hanging 4” thermometer
3516225 Expansion valve
9321041 Chrome plated acorn nut
9321136 Holding for cutting board pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18SC39A SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
F18SR44C SERIES
000-402-0041 Removable 10 pan hinged cover
XMK00005 19” Lo Profile Door Assembly
F18SC39B, F18SC52B
000-402-003X Removable 8 pan cover
XMK00005 19” Lo Profile Door Assembly
F18SR52A SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo Profile Door Assembly
F18SC52A, SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
F18SC52C SERIES
000-402-0041 Removable 10-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
F18SC52D SERIES
000-402-0045 Removable 12-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
F18SC60A SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo Profile Door assembly
F18SC60B SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile door assembly
XMK00007 27” Lo profile door assembly
F18SC60C SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo profile door assembly
F18SC60D SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo profile door assembly
F18SR SERIES
STANDARD PARTS
XMK00109 Coil assembly solenoid
1701000 Cutting board pin
2183348 Cord/plug assembly
2190154 On/Off Switch
2193927 Pressure control
3234266 Right pan cover end hinge
3234282 Left end pan cover hinge
3234392 Double (Center) pan cover hinge
3234645 Leg
3516135 Hanging 4” thermometer
3516225 Expansion valve
9321041 Chrome plated acorn nut
9321136 Holding for cutting board pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18SR31A & F18SR44A SERIES
000-402-003T Removable 6-pan hinged cover
XMK00005 19” Lo Profile Door Assembly
F18SR44B SERIES
000-402-003X Removable 8 pan hinged cover
XMK00005 19” Lo Profile Door Assembly
F18SR52B SERIES
000-402-003X Removable 8 pan hinged cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo Profile Door Assembly
F18SR52C SERIES
000-402-0041 Removable 10 pan hinged cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo Profile Door Assembly
F18SR52D SERIES
000-402-0045 Removable 12 pan hinged cover
XMK00005 19” Lo Profile Door Assembly
XMK00007 27” Lo Profile Door Assembly
F18WC SERIES
STANDARD PARTS
SMK00039 Louver
XMK00107 Evaporator Coil Assembly
1701000 Cutting board pin
2183348 Cord/plug assembly
2193927 Pressure control
3234290 Plastic plug shelf support
3234645 Leg
3516135 Hanging 4” thermometer
9321041 Chrome plated acorn nut
9321132 Long stud dog-point
9321136 Holding for cutting board pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18WC39 SERIES
SMK00039 Louver Assembly
XMK00001 Door assembly 19”
3977984 19” Wire Shelf
F18WC47 SERIES
SMK00039 Louver Assembly
XMK00003 Door assembly 27”
3978014 27” Wire Shelf
F18WC52 SERIES
SMK00039 Louver Assembly
XMK00001 Door assembly 19”
3977984 19” Wire Shelf
F18WC60 SERIES
SMK00039 Louver Assembly
XMK00001 Door assembly 19”
XMK00003 Door assembly 27”
3977984 19” Wire Shelf
3978014 27” Wore Shelf
F18WC68 SERIES
SMK00039 Louver Assembly
XMK00003 Door assembly 27”
3978014 Wire Shelf 27”
Delfield
™
16
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
F18WC78 SERIES
SMK00039 Louver Assembly
XMK00004 Door assembly 32”
3977983 32” Wire Shelf
F18WR87 SERIES
XMK00003 Door assembly 27”
3978014 Wire Shelf 27”
F18WC87 SERIES
SMK00039 Louver Assembly
XMK00001 Door assembly 19”
XMK00003 Door assembly 27”
3977984 19” Wire Shelf
3978014 27” Wire Shelf
F18WC95 SERIES
SMK00039 Louver Assembly
XMK00003 Door assembly 27”
3978014 27” Wire Shelf
F18WR SERIES
STANDARD PARTS
1701000 Cutting board pin
3234290 Plastic plug shelf support
3234645 Leg
3516135 Hanging 4” thermometer
9321040 Stud spot
9321041 Chrome plated acorn nut
9321132 Long stud dog-point
9321136 Holding for cutting board pin
9321374 Salad pan cover pin hinge
ADDITIONAL PARTS
F18WR31 SERIES
XMK00001 Door assembly 19”
XMK00109 Evaporator Coil Assembly
3977984 Wire shelf 19”
F18WR39 SERIES
XMK00003 Door assembly 27”
XMK00109 Evaporator Coil Assembly
3978014 Wire shelf 27”
F18WR44 SERIES
XMK00001 Door assembly 19”
XMK00109 Evaporator Coil Assembly
3977984 Wire shelf 19”
F18WR52 SERIES
XMK00001 Door assembly 19”
XMK00003 Door assembly 27”
XMK00109 Evaporator Coil Assembly
3977984 Wire shelf 19”
3978014 Wire Shelf 27”
F18WR60 SERIES
XMK00003 Door assembly 27”
XMK00109 Evaporator Coil Assembly
3978014 Wire shelf 27”
F18WR70 SERIES
XMK00004 Door assembly 32”
XMK00109 Evaporator Coil Assembly
3977983 Wire shelf 32”
F18WR79 SERIES
XMK00001 Door assembly 19”
XMK00003 Door assembly 27”
XMK00108 Evaporator Coil Assembly
3977984 Wire Shelf 19”
3978014 Wire Shelf 27”
Delfield
™
®
17
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
17
F18 Series Service and Installation Manual
Wiring Diagram: Refrigerated Base Work Tables
F18WC
L1
ON 115 VOLT MODELS ONLY
L2 IS THE NEUTRAL
L2
G
ON/OFF SWITCH
CONDENSING UNIT
PRESSURE CONTROL
POWER CORD
PROVIDED ON
SELF-CONTAINED
MODELS
EVAPORATOR FAN(S)
Wiring Diagram: Refrigerated Base & Reduced Rail Tables
F18MC, F18SC, F18BC & F18RC
L1
ON 115 VOLT MODELS ONLY
L2 IS THE NEUTRAL
L2
G
ON/OFF SWITCH
CONDENSING UNIT
PRESSURE CONTROL
POWER CORD
PROVIDED ON
SELF-CONTAINED
MODELS
BASE
EVAPORATOR FAN(S)
T'STAT
SOLENOID VALVE(S)
*NOTE: with LiquiTec
same drawing but
remove receptacle for
optional fan package.
Only on LiquiTec
RAIL
SWITCH
SOLENOID VALVE
T'STAT
*Not on LiquiTec
RECEPTACLE FOR OPTIONAL
FAN PACKAGE
Delfield
™
18
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Wiring Diagram: Freezer Base Work Tables
F18FC
L1
N
G
ON/OFF SWITCH
CONDENSING UNIT
BLACK/
ORANGE
2
C1
PRESS
SWITCH
4
C1
X
PURPLE
ORANGE
FAN
DELAY
3
C1
1
C1
TIMER
N
WHITE
EVAP
FANS
RED
DEFROST
HEATER
DOOR FRAME
HEATER
MULLION
HEATER
Delfield
™
®
19
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
19
F18 Series Service and Installation Manual
Standard One Year Warranty (one year parts, 90 days labor)
The Delfield Company (“Delfield”) warrants to the Original
Purchaser of the Delfield product (herein called the “Unit”)
that such Unit, and all parts thereof, will be free from defects in
material and workmanship under normal use and service for a
period of one (1) year from the date of shipment of the Unit to
the Original Purchaser or, if the Original Purchaser returns
the warranty card completely filled out including the date
of installation within thirty (30) days of receipt of the Unit,
one (1) year from the date of installation. During this one
year warranty period, Delfield will repair or replace any defective part or portion there of returned to Delfield by the Original
Purchaser which Delfield determines was defective due to
faulty material or workmanship. The Original purchaser will
pay all labor, crating, freight and related costs incurred in the
removal of the Unit of defective component and shipment to
Delfield, except that during a period of either ninety (90) days
from the date of shipment of the Unit to the Original Purchaser
or, if the Original Purchaser returns the warranty card completely filled out including the date of installation within thirty
(30) days of receipt of the Unit, ninety (90) days from the date
of installation Delfield will pay all related labor costs. Delfield
will pay the return costs if the Unit or part thereof was defective.
The term “Original Purchaser” as used herein means that
person, firm, association, or corporation for whom the Unit was
originally installed.
This warranty does not apply to any Unit or part thereof that
has been subjected to misuse, neglect, alteration, or accident,
such as accidental damage to the exterior finish, operated
contrary to the recommendations specified by Delfield; or
repaired or altered by anyone other than Delfield in any way so
as to, in Delfield’s sole judgement, affect its quality or efficiency. This warranty does not apply to any Unit that has been
moved from the location where it was originally installed. This
warranty also does not cover the refrigerator drier or the light
bulbs used in the Unit. The warranty is subject to the user’s
normal maintenance and care responsibility as set forth
in the Service and Installation Manual, such as cleaning
the condenser coil, and is in lieu of all other obligations
of Delfield. Delfield neither assumes, nor authorizes any
other person to assume for Delfield, any other liability in
connection with Delfield’s products.
Removal or defacement of the original Serial Number or
Model Number from any Unit shall be deemed to release
Delfield from all obligations hereunder or any other obligations,
express or implied.
Parts furnished by suppliers to Delfield are guaranteed by
Delfield only to the extent of the original manufacturer’s
express warranty to Delfield. Failure of the Original Purchaser
to receive such manufacturer’s express warranty to Delfield.
Failure of the Original Purchaser to receive such manufacturers warranty shall in no way create any warranty, expressed or
implied, or any other obligation or liability on Delfield’s part in
respect thereof.
If shipment of a replacement part is requested prior to the
arrival in the Delfield factory of the part claimed to be defective, the Original Purchaser must accept delivery of the
replacement part of a C.O.D. basis, with credit being issued
after the part has been received and inspected at Delfield’s
plant and determined by Delfield to be within this warranty.
Under no condition does this warranty give the Original Purchaser the right to replace the defective Unit with a complete
Unit of the same manufacturer or of another make. Unless
authorized by Delfield in writing, this warranty does not permit
the replacement of any part, including the motor-compressor,
to be made with the part of another make or manufacturer.
No claims can be made under this warranty for spoilage of any
products for any reason, including system failure.
The installation contractor shall be responsible for building
access, entrance and field conditions to insure sufficient clearance to allow any hood(s), vent(s), or Unit(s) if necessary, to
be brought into the building. Delfield will not be responsible for
structural changes or damages incurred during installation of
the Unit or any exhaust system.
Delfield shall not be liable in any manner for any default or
delay in performance hereunder caused by or resulting from
any contingency beyond Delfield’s control, including, but
not limited to, war, governmental restrictions or restraints,
strike, lockouts, injunctions, fire, flood, acts of nature, short
or reduced supply of raw materials, or discontinuance of the
parts by the original part manufacturer.
Except as provided in any Additional Four Year Protection Plan, if applicable, and the Service Labor Contract,
if applicable, the foregoing is exclusive and in lieu of
all other warranties, whether written or oral, express or
implied. This warranty supersedes and excludes any prior
oral or written representations or warranties. Delfield
expressly disclaims any implied warranties of merchantability, fitness for a particular purpose of compliance with
any law, treaty, rule or regulation relating to the discharge
of substances into the environment. The sole and exclusive remedies of any person relating to the Unit, and the
full liability of Delfield for any breach of this warranty, will
be as provided in this warranty.
Other than this Delfield Standard One Year Limited Warranty,
any applicable Delfield Additional Four Year Protection Plan
or applicable Delfield Service Labor Contract, the Original
Purchaser agrees and acknowledges that no other warranties
are offered or provided in connection with or for the unit or any
other part thereof.
In no event will Delfield be liable for special, incidental or consequential damages, or for damages in the nature of penalties.
Delfield
™
20
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
®
F18 Series Service and Installation Manual
Additional Four Year Protection Plan (for Motor-Compressor only)
Delfield Model# Serial #
Installation
Date
In addition to the Standard One Year Warranty on the MotorCompressor contained in the above listed Delfield product
(the “Unit”), The Delfield Company (“Delfield”) also agrees to
repair, or exchange with similar or interchangeable parts in
design and capacity at Delfield’s option, the defective MotorCompressor contained in the Unit (the “Motor-Compressor),
or any part thereof, for the Original Purchaser only, at any
time during the four (4) years following the initial one (1) year
period commencing on the date of installation for the Original
Purchaser. Failure of the Original Purchaser to register
the registration card containing the Original Purchasers
name, address, date of installation, model number and
serial number of the Unit containing the Motor-Compressor within 30 days from the date of installation shall void
this warranty. This additional warranty is only available if
the Motor-Compressor is inoperative due to defects in material or factory workmanship, as determined by Delfield in its
sole judgement and discretion. The Original Purchaser shall
be responsible for returning the defective Motor-Compressor
to Delfield prepaid, F.O.B. at the address shown on the back
cover of this manual.
The term “Original Purchaser” as used herein means that
person, firm, association, or corporation for whom the Unit was
originally installed.
The term “Motor-Compressor” as used herein does not include
unit base, air or water cooled condenser, receiver, electrical
accessories such as relay, capacitors, refrigerant controls, or
condenser fan/motor assembly. This warranty does not cover
labor charges incidental to the replacement of parts. This
warranty further does not include any equipment to which said
condensing unit is connected, such as cooling coils, temperature controls or refrigerant metering devices. This warranty
shall be void if the Motor-Compressor, in Delfield’s sole judgement, has been subjected to misuse, neglect, alteration or
accident, operated contrary to the recommendations specified
by the Unit manufacturer, repaired or altered by anyone other
than Delfield in any way so as, in Delfield’s sole judgment, to
affect its quality or efficiency or if the serial number has been
altered, defaced or removed. This Warranty does not apply
to a Motor-Compressor in any Unit that has been moved from
the location where it was originally installed. The addition of
methyl chloride to the condensing unit or refrigeration system
shall void this warranty.
Delfield
™
®
General Conditions
Delfield shall not be liable in any manner for any default or
delay in performance hereunder caused by or resulting from
any contingency beyond Delfield’s control, including, but
not limited to, war, governmental restrictions or restraints,
strike, lockouts, injunctions, fire, flood, acts of nature, short or
reduced supply of raw materials, or discontinuance of any part
or the Motor-Compressor by the unit manufacturer.
Replacement of a defective Motor-Compressor is limited to
one (1) Motor-Compressor by us during the four (4) year
period. Delfield shall replace the Motor-Compressor at no
charge.
This warranty does not give the Original Purchaser of the
Motor-Compressor the right to purchase a complete replacement Motor-Compressor of the same make or of another
make. It further does not permit the replacement to be made
with a Motor-Compressor of another kind unless authorized by
Delfield. In the event Delfield authorizes the Original Purchaser to purchase a replacement Motor-Compressor locally,
only the wholesale cost of the Motor-Compressor is refundable.
Expressly excluded from this warranty are damages resulting
from spoilage of goods.
Except as provided in any applicable Standard One Year
Limited Warranty or applicable Service Labor Contract,
the foregoing is exclusive and in lieu of all other warranties, whether written or oral, express or implied. This
Warranty supersedes and excludes any prior oral or
written representations or warranties. Delfield expressly
disclaims any implied warranties of merchantability, fitness for a particular purpose or compliance with any law,
treaty, rule or regulation relating to the Motor-Compressor,
and the full liability of Delfield for any breach of this warranty, will be as provided in this warranty.
Other than any applicable Delfield Standard One year Limited Warranty, this Delfield Additional Four Year Protection
Plan and any applicable Delfield Service Labor Contract, the
Original Purchaser agrees and acknowledges that no other
warranties are offered or provided in connection with or for the
Motor-Compressor or any part thereof.
In no event will Delfield be liable for special, incidental or consequential damages, or for damages in the nature of penalties.
21
For customer service, call (800) 733-8829, (800) 773-8821, Fax (989) 773-3210, www.delfield.com
21
AUTHORIZED PARTS DEPOTS
NORTH
AMERICA
12
10
4
4
8
5
1
11
6
2
3
14
13
7
9
12
Delfield has 14 conveniently located Parts Depots to ensure parts are handled promptly and accurately.
1) The Delfield Company
980 South Isabella Road
Mt. Pleasant, MI 48858
800.733.8829
989.773.7981
989.773.3210 FAX
custom parts direct from Delfield
5) Contract Ice
2) A.I.S. Commercial Parts & Service
3) Appliance Installation Service
1816 West 26th Street
Erie, PA 16508-1149
800.332.3732
814.456.3732
814.452.4843 FAX
1336 Main Street
Buffalo, NY 14209
800.722.1252
716.884.7425
716. 884.0410 FAX
5367 2nd Street
Irwindale, CA 91706
800. 258.6999
626.960.9390
626.337.4541 FAX
serves: MD, NJ, OH, PA, VA, WV
serves: CT, DC, DE, MA, MD, ME,
NH, NJ, NY, PA, RI, VA, VT, WV
serves: AZ, CA, HI, NV, OR
6) E.M.C.O. Sales & Distributors
7) STOVE PARTS SUPPLY/GCS SERVICE
14450 Ewing Ave S. #100
Burnsville, MN 55306
800.422.2823
952.894.4427
952.894.2164 FAX
3909 St. Timothy Lane
St. Ann, MO 63074
800.972.7670
314.427.7477
314. 427.8190 FAX
2120 Solona St.
PO Box 14009
Fort Worth, TX 76117-0009
1.800.433.1804 toll free
1.800.272.7358 fax
serves: IA, MN, MT, ND, SD, WI
serves: AR, IA, IL, KS,
KY, MO, NE, OK, TX, NM, LA
serves: AR, LA, NM, OK, TX
9) Global Parts and Supplies
10) Hawkins Commercial Appl. Serv.
2920 N.W. 109th Avenue
Miami, FL 33172
305 994.9994
305.994.9992 FAX
3000 S. Wyandot
Englewood, CO 80110
(800) 624-2117
(303) 7618861 FAX
International parts depot
serves: AZ, CO, KS, NE, NM, OK, UT, WY
11) MicroDine, Inc.
44792 Helm
Plymouth, MI 48170
888.828.4454
734.451.2043
734.451.3215 FAX
serves: MI, IN, WI, OH
13) Southeastern Restaurant Services
4) Barker's Food Machinery
8) Garland Group
1177 Kamato Road
Mississauga, Ontario L4W1X4
800.427.6668
800.361.7745 FAX
serves: Canada
12) Performance Refrigeration Parts
9923 S.W. 178th St.
Vashon, WA 98070
888.872.2465
206-463-1772
206.463.4431 FAX
serves: AK, HI, ID, MT, OR, WA
14) T.M.A.
2200 Norcross Parkway, Suite 210
Atlanta, GA 30071
800.235.6516
770.446.6177
770.446.3157 FAX
2916 Sidco Drive
Nashville, TN 37204
615.726.0351
800.737.0351
615.259.4100 FAX
serves: FL, GA, MS, NC, SC, VA
serves: TN, AL
�
980
U.S.A.
• (989)
773-7981
(800)
733-8821
• Fax
(989)
773-3210
• www.delfield.com
980S.S.Isabella
IsabellaRd.,
Rd.,Mt.
Mt.Pleasant,
Pleasant,MIMI48804-0470,
48858, U.S.A.
• +1(989)
773-7981
oror
(800)
733-8829
• Fax
(866)
779-2040
• www.delfield.com
Delfieldreserves
reservesthe
theright
righttotomake
make
changes
design
specifications
without
prior
notice.
2001The
the Delfield
Delfield Company.
company. All
Delfield
changes
in in
design
or or
specifications
without
prior
notice.
©2007
All rights
rights reserved.
reserved. Printed
Printed in
in the
the U.S.A.
U.S.A.
DM18 12/07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement