TIBCO ActiveMatrix BusinessWorks Error Codes

TIBCO ActiveMatrix BusinessWorks Error Codes
TIBCO ActiveMatrix
BusinessWorks™
Error Codes
Software Release 5.7
December 2008
Important Information
SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED
OR BUNDLED TIBCO SOFTWARE IS SOLELY TO ENABLE THE FUNCTIONALITY (OR PROVIDE LIMITED
ADD-ON FUNCTIONALITY) OF THE LICENSED TIBCO SOFTWARE. THE EMBEDDED OR BUNDLED
SOFTWARE IS NOT LICENSED TO BE USED OR ACCESSED BY ANY OTHER TIBCO SOFTWARE OR FOR
ANY OTHER PURPOSE.
USE OF TIBCO SOFTWARE AND THIS DOCUMENT IS SUBJECT TO THE TERMS AND CONDITIONS OF A
LICENSE AGREEMENT FOUND IN EITHER A SEPARATELY EXECUTED SOFTWARE LICENSE
AGREEMENT, OR, IF THERE IS NO SUCH SEPARATE AGREEMENT, THE CLICKWRAP END USER
LICENSE AGREEMENT WHICH IS DISPLAYED DURING DOWNLOAD OR INSTALLATION OF THE
SOFTWARE (AND WHICH IS DUPLICATED IN LICENSE.PDF) OR IF THERE IS NO SUCH SOFTWARE
LICENSE AGREEMENT OR CLICKWRAP END USER LICENSE AGREEMENT, THE LICENSE(S) LOCATED
IN THE “LICENSE” FILE(S) OF THE SOFTWARE. USE OF THIS DOCUMENT IS SUBJECT TO THOSE TERMS
AND CONDITIONS, AND YOUR USE HEREOF SHALL CONSTITUTE ACCEPTANCE OF AND AN
AGREEMENT TO BE BOUND BY THE SAME.
This document contains confidential information that is subject to U.S. and international copyright laws and
treaties. No part of this document may be reproduced in any form without the written authorization of TIBCO
Software Inc.
TIB, TIBCO, TIBCO Adapter, Predictive Business, Information Bus, The Power of Now, TIBCO ActiveMatrix
BusinessWorks, TIBCO Rendezvous, TIBCO Administrator, TIBCO Enterprise Message Service, TIBCO
InConcert, TIBCO Policy Manager, and TIBCO Hawk are either registered trademarks or trademarks of TIBCO
Software Inc. in the United States and/or other countries.
All other product and company names and marks mentioned in this document are the property of their
respective owners and are mentioned for identification purposes only.
THIS SOFTWARE MAY BE AVAILABLE ON MULTIPLE OPERATING SYSTEMS. HOWEVER, NOT ALL
OPERATING SYSTEM PLATFORMS FOR A SPECIFIC SOFTWARE VERSION ARE RELEASED AT THE SAME
TIME. SEE THE README.TXT FILE FOR THE AVAILABILITY OF THIS SOFTWARE VERSION ON A
SPECIFIC OPERATING SYSTEM PLATFORM.
THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
THIS DOCUMENT COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE
INCORPORATED IN NEW EDITIONS OF THIS DOCUMENT. TIBCO SOFTWARE INC. MAY MAKE
IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN
THIS DOCUMENT AT ANY TIME.
THE CONTENTS OF THIS DOCUMENT MAY BE MODIFIED AND/OR QUALIFIED, DIRECTLY OR
INDIRECTLY, BY OTHER DOCUMENTATION WHICH ACCOMPANIES THIS SOFTWARE, INCLUDING
BUT NOT LIMITED TO ANY RELEASE NOTES AND "READ ME" FILES.
Copyright © 1999-2008 TIBCO Software Inc. ALL RIGHTS RESERVED.
TIBCO Software Inc. Confidential Information
| iii
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
TIBCO ActiveMatrix BusinessWorks Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Other TIBCO Product Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Typographical Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
How to Contact TIBCO Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Chapter 1 Process Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Process Engine Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2 Common Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Common Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Chapter 3 XPath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
XPath Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Chapter 4 ActiveEnterprise Adapter Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
ActiveEnterprise Adapter Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Chapter 5 File Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
File Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Chapter 6 FTP Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
FTP Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Chapter 7 General Activities Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
General Activities Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Chapter 8 HTTP Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
HTTP Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Chapter 9 Java Palette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Java Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
TIBCO ActiveMatrix BusinessWorks Error Codes
iv
| Contents
Chapter 10 JDBC Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
JDBC Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Chapter 11 JMS Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
JMS Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Chapter 12 Mail Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Mail Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Chapter 13 Manual Work Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Manual Work Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Chapter 14 Parse Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Parse Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Chapter 15 Rendezvous Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
TIBCO Rendezvous Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Chapter 16 SOAP Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
SOAP Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Chapter 17 TCP Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
TCP Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Chapter 18 Transaction Palette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Transaction Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Chapter 19 XML Activities Palette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
XML Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
TIBCO ActiveMatrix BusinessWorks Error Codes
|v
Preface
This manual lists the error codes that can be returned by TIBCO ActiveMatrix
BusinessWorks.
Topics
•
Related Documentation, page vi
•
Typographical Conventions, page viii
•
How to Contact TIBCO Customer Support, page x
TIBCO ActiveMatrix BusinessWorks Error Codes
vi
| Related Documentation
Related Documentation
This section lists documentation resources you may find useful.
TIBCO ActiveMatrix BusinessWorks Documentation
The following documents form the TIBCO ActiveMatrix BusinessWorks
documentation set:
•
TIBCO ActiveMatrix BusinessWorks Concepts Read this manual before reading
any other manual in the documentation set. This manual describes
terminology and concepts of TIBCO ActiveMatrix BusinessWorks, and the
other manuals in the documentation set assume you are familiar with the
information in this manual.
•
TIBCO ActiveMatrix BusinessWorks Getting Started This manual steps you
through a very simple example of designing, deploying, and monitoring a
ActiveMatrix BusinessWorks process.
•
ActiveMatrix BusinessWorks Process Design Guide This manual describes how
to create, edit, and test business processes using TIBCO ActiveMatrix
BusinessWorks.
•
ActiveMatrix BusinessWorks Palette Reference This manual describes each of
the palettes available in TIBCO ActiveMatrix BusinessWorks.
•
TIBCO ActiveMatrix BusinessWorks Administration This manual describes how
to use TIBCO Administrator to deploy, manage, and monitor TIBCO
ActiveMatrix BusinessWorks processes.
•
TIBCO ActiveMatrix BusinessWorks Installation Read this manual for
information on installing one or more components of ActiveMatrix
BusinessWorks and setting up a ActiveMatrix BusinessWorks domain.
•
TIBCO ActiveMatrix BusinessWorks Error Codes This manual describes errors
returned by TIBCO ActiveMatrix BusinessWorks.
•
TIBCO ActiveMatrix BusinessWorks Release Notes Read the release notes for a
list of new and changed features. This document also contains lists of known
issues and closed issues for this release.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Preface vii
Other TIBCO Product Documentation
TIBCO ActiveMatrix BusinessWorks is used with other products. You may find it
useful to read the documentation for the following TIBCO products:
•
TIBCO Designer™ software: TIBCO Designer is an easy to use graphical user
interface for design-time configuration of TIBCO applications. TIBCO
Designer includes online help for each palette.
•
TIBCO Administrator™ software: TIBCO Administrator is the monitoring
and managing interface for new-generation TIBCO products such as TIBCO
ActiveMatrix BusinessWorks.
•
TIBCO Adapter software:
•
Third-Party Documentation
TIBCO ActiveMatrix BusinessWorks Error Codes
viii
| Typographical Conventions
Typographical Conventions
The following typographical conventions are used in this manual.
Table 1 General Typographical Conventions
Convention
Use
TIBCO_HOME
Many TIBCO products must be installed within the same home directory. This
directory is referenced in documentation as TIBCO_HOME. The value of
TIBCO_HOME depends on the operating system. For example, on Windows
systems, the default value is C : \ t i b c o .
ENV_HOME
BW_HOME
Other TIBCO products are installed into an installation environment.
Incompatible products and multiple instances of the same product are installed
into different installation environments. The directory into which such products
are installed is referenced in documentation as ENV_HOME. The value of
ENV_HOME depends on the operating system. For example, on Windows
systems the default value is C:\tibco.
TIBCO ActiveMatrix BusinessWorks installs into a directory within
TIBCO_HOME. This directory is referenced in documentation as BW_HOME. The
value of BW_HOME depends on the operating system. For example on Windows
systems, the default value is C : \ t i b c o \ b w \ 5 . 7 .
code font
Code font identifies commands, code examples, filenames, pathnames, and
output displayed in a command window. For example:
Use M y C o m m a n d to start the foo process.
bold code
Bold code font is used in the following ways:
font
•
In procedures, to indicate what a user types. For example: Type a d m i n .
•
In large code samples, to indicate the parts of the sample that are of
particular interest.
•
In command syntax, to indicate the default parameter for a command. For
example, if no parameter is specified, M y C o m m a n d is enabled:
MyCommand [e n a b l e | disable]
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Preface ix
Table 1 General Typographical Conventions (Cont’d)
Convention
Use
italic font
Italic font is used in the following ways:
Key
combinations
•
To indicate a document title. For example: See TIBCO ActiveMatrix
BusinessWorks Concepts.
•
To introduce new terms For example: A portal page may contain several
portlets. Portlets are mini-applications that run in a portal.
•
To indicate a variable in a command or code syntax that you must replace.
For example: M y C o m m a n d pathname
Key name separated by a plus sign indicate keys pressed simultaneously. For
example: Ctrl+C.
Key names separated by a comma and space indicate keys pressed one after the
other. For example: Esc, Ctrl+Q.
The note icon indicates information that is of special interest or importance, for
example, an additional action required only in certain circumstances.
The tip icon indicates an idea that could be useful, for example, a way to apply
the information provided in the current section to achieve a specific result.
The warning icon indicates the potential for a damaging situation, for example,
data loss or corruption if certain steps are taken or not taken.
TIBCO ActiveMatrix BusinessWorks Error Codes
x
| How to Contact TIBCO Customer Support
How to Contact TIBCO Customer Support
For comments or problems with this manual or the software it addresses, please
contact TIBCO Support as follows.
•
For an overview of TIBCO Support, and information about getting started
with TIBCO Support, visit this site:
http://www.tibco.com/services/support
•
If you already have a valid maintenance or support contract, visit this site:
https://support.tibco.com
Entry to this site requires a user name and password. If you do not have a user
name, you can request one.
TIBCO ActiveMatrix BusinessWorks Error Codes
|1
Chapter 1
Process Engine
This chapter lists error codes returned by the TIBCO ActiveMatrix BusinessWorks
process engine.
Topics
•
Process Engine Error Codes, page 2
TIBCO ActiveMatrix BusinessWorks Error Codes
2
| Chapter 1
Process Engine
Process Engine Error Codes
BWENGINE-100001: %1
Role: errorRole
Category: BW-Core
Description: used for logging generic exception, detailed message code not
provided
Resolution: Depends on content of exception
BWENGINE-100002: %1
Role: errorRole
Category: BW-Core
Description: used when underlying support reported an error
Resolution: Depends on content of exception
BWENGINE-100003: %1
Role: errorRole
Category: BW-Core
Description: used for startup failures
Resolution: Depends on failure details
BWENGINE-100004: %1
Role: errorRole
Category: BW-Core
Description: used for shutdown failures
Resolution: Depends on failure details
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 3
BWENGINE-100005: Load Error
Role: errorRole
Category: BW-Core
Description: Error loading project
Resolution: Depends on failure details
BWENGINE-100006: Load Error: ref=%1, class=%2
Role: errorRole
Category: BW-Core
Description: Error loading project
Resolution: Depends on failure details
BWENGINE-100007: useSeparateThread may only be called from within the init() method
Role: errorRole
Category: BW-Core
Description: useSeparateThread may only be called from within the init() method
Resolution: Correct activity code
BWENGINE-100008: Cannot find specified Engine.Database.Configuration: %1
Role: errorRole
Category: BW-Core
Description: Cannot find specified Engine.Database.Configuration
Resolution: Re-deploy specifying correct database shared configuration
TIBCO ActiveMatrix BusinessWorks Error Codes
4
| Chapter 1
Process Engine
BWENGINE-100009: Access error for Engine.Database.Configuration: %1
Role: errorRole
Category: BW-Core
Description: Access error for Engine.Database.Configuration
Resolution:
BWENGINE-100010: Plugin agent class name not specified
Role: errorRole
Category: BW-Core
Description: Plugin agent class name not specified
Resolution: Correct plugin definition file
BWENGINE-100011: Error processing plugin agent [%1]
Role: errorRole
Category: BW-Core
Description: Error processing plugin agent
Resolution:
BWENGINE-100012: Initialization error in [%1/%2]
Role: errorRole
Category: BW-Core
Description: The activity init method detected an error
Resolution: Depends on content of "caused by" exception
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 5
BWENGINE-100013: Termination error in [%1/%2]
Role: errorRole
Category: BW-Core
Description: The activity destroy method detected an error
Resolution: Depends on content of "caused by" exception
BWENGINE-100014: process initialization failed for %1
Role: errorRole
Category: BW-Core
Description: The specified process definition could not be initialized. It is
unavailable for use.
Resolution: Depends on content of "caused by" exception
BWENGINE-100015: Could not find process definition: %1
Role: errorRole
Category: BW-Core
Description: The specified process definition could not found.
Resolution: Process loading may have failed or process loading may not have
been requested or may be using incorrect process reference.
BWENGINE-100016: failed to spawn called process
Role: errorRole
Category: BW-Core
Description: The Call Process activity, spawn option, failed.
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
6
| Chapter 1
Process Engine
BWENGINE-100017: failed to execute called process
Role: errorRole
Category: BW-Core
Description: The Call Process activity failed to execute called process
Resolution:
BWENGINE-100018: Process definition name not specified
Role: errorRole
Category: BW-Core
Description: Process name is required, but has not been specified
Resolution: Enter required item.
BWENGINE-100019: Can not checkpoint in middle of transaction
Role: errorRole
Category: BW-Core
Description: A checkpoint may not occur within a transaction group
Resolution: Correct process design
BWENGINE-100020: Activation error with process starter [%1]
Role: errorRole
Category: BW-Core
Description: Activation error with a process starter
Resolution: Depends on content of exception
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 7
BWENGINE-100021: Checkpoint failed
Role: errorRole
Category: BW-Core
Description: Checkpoint attempt failed
Resolution: Depends on content of exception
BWENGINE-100022: Error restarting process %1 from checkpoint
Role: errorRole
Category: BW-Core
Description: Error trying to restart process from checkpoint
Resolution: Depends on content of exception. May be that checkpoint was taken
on a different version of BW.
BWENGINE-100023: Error restarting checkpoint, process definition not found: %1
Role: errorRole
Category: BW-Core
Description: Can not find the process definition needed by the checkpointed
process
Resolution: Make sure same processes are deployed when restarting engine as
when checkpoint was taken.
BWENGINE-100024: %1 Unable to delete checkpoint
Role: errorRole
Category: BW-Core
Description: Failed to deleted checkpoint
Resolution: Depends on content of exception. If checkpoint not deleted, job could
be restarted on next engine startup.
TIBCO ActiveMatrix BusinessWorks Error Codes
8
| Chapter 1
Process Engine
BWENGINE-100025: Failed to get next job id block
Role: errorRole
Category: BW-Core
Description: Can not get the next block of job ids.
Resolution: Depends on content of exception
BWENGINE-100026: Error with fault tolerant setup
Role: errorRole
Category: BW-Core
Description: Error with fault tolerant setup. Engine will not start.
Resolution: Depends on content of exception
BWENGINE-100027: Notify error: group = %1, key = %2
Role: errorRole
Category: BW-Core
Description: Notify unable to complete wakeup of waiting entity
Resolution: Depends on content of exception
BWENGINE-100028: Deactivation error with process starter [%1]
Role: errorRole
Category: BW-Core
Description: Deactivation error with a process starter
Resolution: Depends on content of exception
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 9
BWENGINE-100029: Activity timed out
Role: errorRole
Category: BW-Core
Description: Activity did not complete execution within the specified time limit
Resolution:
BWENGINE-100030: Input data invalid
Role: errorRole
Category: BW-Core
Description: Activity input data validation error
Resolution:
BWENGINE-100031: Output data invalid
Role: errorRole
Category: BW-Core
Description: Activity output data validation error
Resolution:
BWENGINE-100032: Error output data invalid
Role: errorRole
Category: BW-Core
Description: Activity error output data vailidation error
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
10
| Chapter 1
Process Engine
BWENGINE-100033: Activity providing output data but none is expected
Role: errorRole
Category: BW-Core
Description: Activity has output when none was expected.
Resolution:
BWENGINE-100034: transition cycle detected in [%1/%2]
Role: errorRole
Category: BW-Core
Description: This process contains an illegal transition cycle
Resolution: This process does not allow transition cycles
BWENGINE-100035: error on exit from activity, no matching transition
Role: errorRole
Category: BW-Core
Description: No transition out of activity evaluated true. This generates an Error
condition.
Resolution: Add transition or check conditions of existing transitions
BWENGINE-100036: error on exit from activity, too many matching transitions
Role: errorRole
Category: BW-Core
Description: Multiple transitions may not be taken when transition cycles are
allowed.
Resolution: This process allows transition cycles and does not allow two
transitions from any activity to be true at the same time.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 11
BWENGINE-100037: Repository not found: %1
Role: errorRole
Category: BW-Core
Description: Can not locate specified repository
Resolution: Make sure using correct reference and server is available
BWENGINE-100038: Repository not specified
Role: errorRole
Category: BW-Core
Description: No repository location specified
Resolution: Specify location of repository
BWENGINE-100039: Variable name not specfied
Role: errorRole
Category: BW-Plugin
Description: Variable name to set has not been specified
Resolution: Specify variable name in configuration panel
BWENGINE-100040: Undefined variable [%1]
Role: errorRole
Category: BW-Plugin
Description: Unable to find definition for specified variable
Resolution: Please look at exception for more details
TIBCO ActiveMatrix BusinessWorks Error Codes
12
| Chapter 1
Process Engine
BWENGINE-100041: Mapping Error
Role: errorRole
Category: BW-Core
Description: Problem find with mapping
Resolution: Please look at mapping for more details
BWENGINE-100042: Configured Fault not found [%1]
Role: errorRole
Category: BW-Core
Description: Can not find the specified fault name
Resolution:
BWENGINE-100043: Error resolving Fault [%1]
Role: errorRole
Category: BW-Core
Description: Error encountered resolving specified fault name
Resolution:
BWENGINE-100044: File not found [%1]
Role: errorRole
Category: BW-Core
Description: Can not find specified filename
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 13
BWENGINE-100045: Pager can not load [%1]
Role: errorRole
Category: BW-Core
Description: Can not load the page file for the specified job
Resolution:
BWENGINE-100046: Shutdown due to startup error
Role: errorRole
Category: BW-Core
Description: Engine shutdown due to startup error
Resolution:
BWENGINE-100047: %1 Error in [%2/%3]
Role: errorRole
Category: BW-Core
Description:
Resolution:
BWENGINE-100048: Error in [%1/%2]
Role: errorRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
14
| Chapter 1
Process Engine
BWENGINE-100049: Error restarting [%1], can not acquire lock [%2]
Role: errorRole
Category: BW-Core
Description: Error trying to restart process from checkpoint
Resolution: Process requires lock that is already acquired.
BWENGINE-100050: Activation error with plugin agent [%1]
Role: errorRole
Category: BW-Core
Description: Activation error with plugin agent
Resolution: Depends on content of exception
BWENGINE-100051: Unable to create trace object
Role: errorRole
Category: BW-Core
Description: Unable to create trace object
Resolution: Depends on content of exception
BWENGINE-100052: Configuration error on input type for [%1]: %2
Role: errorRole
Category: BW-Core
Description: Can not load process input type
Resolution: Depends on content of details
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 15
BWENGINE-100053: Configuration error on output type for [%1]: %2
Role: errorRole
Category: BW-Core
Description: Can not load process output type
Resolution: Depends on content of details
BWENGINE-100054: Configuration error on error output type for [%1]: %2
Role: errorRole
Category: BW-Core
Description: Can not load process error output type
Resolution: Depends on content of details
BWENGINE-100055: Configuration error on user process variables for [%1]: %2
Role: errorRole
Category: BW-Core
Description: Can not load user process variable types
Resolution: Depends on content of details
BWENGINE-100056: Loop index slot name already used: [%1]
Role: errorRole
Category: BW-Core
Description: Loop index slot name already used
Resolution: Index variable name already taken. Specify another name not already
in use.
TIBCO ActiveMatrix BusinessWorks Error Codes
16
| Chapter 1
Process Engine
BWENGINE-100057: Invalid loop index slot name: [%1]
Role: errorRole
Category: BW-Core
Description: Invalid loop index slot name
Resolution: Specify a valid variable name
BWENGINE-100058: Accumulate output variable name already used: %1
Role: errorRole
Category: BW-Core
Description: Accumulate output variable name already used
Resolution: Accumulate variable name already taken. Specify another name not
already in use.
BWENGINE-100059: Invalid accumulate output variable name: %1
Role: errorRole
Category: BW-Core
Description: Invalid accumulate output variable name
Resolution: Specify a valid variable name
BWENGINE-100060: No output to accumulate from activity: %1
Role: errorRole
Category: BW-Core
Description: No output to accumulate from activity
Resolution: Can only accumulate output from an activity that has output
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 17
BWENGINE-100061: Bad activity name for accumulate output: %1
Role: errorRole
Category: BW-Core
Description: Bad activity name for accumulate output
Resolution: Can only accumulate output from an activity within the group
BWENGINE-100062: Slot name already used: %1
Role: errorRole
Category: BW-Core
Description: Slot name already used
Resolution: Slot name already used. Specify another name not already in use.
BWENGINE-100063: Process variable schema error
Role: errorRole
Category: BW-Core
Description: The schema for a process variable had an error
Resolution: Please look at the process variables tab for more information
BWENGINE-100064: Process Start schema error
Role: errorRole
Category: BW-Core
Description: The Output schema for the process start had an error
Resolution: Please look at the Output Editor tab of the process start for more
information
TIBCO ActiveMatrix BusinessWorks Error Codes
18
| Chapter 1
Process Engine
BWENGINE-100065: Process End schema error
Role: errorRole
Category: BW-Core
Description: The Input schema for the process end had an error
Resolution: Please look at the Input Editor tab of the process end for more
information
BWENGINE-100066: Process Fault schema error
Role: errorRole
Category: BW-Core
Description: An process fault/error schema had an error
Resolution: Please look at the Error Schemas tab of the process end for more
information
BWENGINE-100067: Call process input failed validation
Role: errorRole
Category: BW-Core
Description: The input data passed to the Call Process activity did not conform to
the input of the called process
Resolution: Please check the input mappings for the Call Process activity
BWENGINE-100068: Call process results failed validation
Role: errorRole
Category: BW-Core
Description: The process that was called returned results that were not expected
by the Call Process activity
Resolution: Please check the input mappings for the End activity in the process
that was called
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 19
BWENGINE-100069: The override process [%1] expects different input than the process the
Call Process activity was modeled on [%2]
Role: errorRole
Category: BW-Core
Description: The Process Name Dynamic Override option pointed, at run time, to
a process with different input than the model process used to configure the
activity at design time
Resolution: Please check the Process Name Dynamic Override expression in the
activity configuration
BWENGINE-100070: The process [%1] is not a callable process
Role: errorRole
Category: BW-Core
Description: The specified process is not a callable process (it has a process starter
instead)
Resolution: Please check the process names in the activity configuration
BWENGINE-100071: Multi-engine shared variable or lock requires engine configured to use
database
Role: errorRole
Category: BW-Core
Description: Multi-engine shared variable or lock requires engine configured to
use database
Resolution: Configure engine to use database
BWENGINE-100072: Undefined reference [%1]
Role: errorRole
Category: BW-Core
Description: Unable to find definition for specified reference
Resolution: Please look at exception for more details
TIBCO ActiveMatrix BusinessWorks Error Codes
20
| Chapter 1
Process Engine
BWENGINE-100073: Unable to parse initial value
Role: errorRole
Category: BW-Core
Description: Unable to parse initial value
Resolution: Correct error in definition of initial value
BWENGINE-100074: Persistent storage error
Role: errorRole
Category: BW-Core
Description: Problem accessing persistent storage
Resolution: Please look at exception for more details
BWENGINE-100075: Variable not set
Role: errorRole
Category: BW-Core
Description: Variable not set and has no initial value
Resolution: Set variable before use or define initial value
BWENGINE-100076: Shared variable schema error
Role: errorRole
Category: BW-Core
Description: The schema for a shared variable had an error
Resolution: Please look at exception for more details
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 21
BWENGINE-100077: Error with Transaction Manager [%1]
Role: errorRole
Category: BW-Core
Description: Error with the specified Transaction Manager
Resolution: Please look at exception for more details
BWENGINE-100078: Transaction Manager not specified
Role: errorRole
Category: BW-Core
Description: Transaction Manager not specified
Resolution: Specify transaction manager
BWENGINE-100079: Duplicate key [%1] already used by job [%2]
Role: errorRole
Category: BW-Core
Description: Another job has already registered this key
Resolution:
BWENGINE-100080: Only one duplicate key allowed per job
Role: errorRole
Category: BW-Core
Description: This job has already registered another key
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
22
| Chapter 1
Process Engine
BWENGINE-100081: XA Resource not available from [%1]
Role: errorRole
Category: BW-Core
Description: The specified event source did not provide an XA Resource
Resolution: Check event source configuration
BWENGINE-100082: Event context from [%1] not found
Role: errorRole
Category: BW-Core
Description: The specified event source did not provide an event context
Resolution: Check event source configuration
BWENGINE-100083: Checkpoint verify failed
Role: errorRole
Category: BW-Core
Description: Attempt to verify checkpoint failed
Resolution: Depends on content of exception
BWENGINE-100084: Transaction rollback error
Role: errorRole
Category: BW-Core
Description: Exception thrown during transaction rollback
Resolution: Depends on content of exception
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 23
BWENGINE-100085: Configuration error, checkpoint can not join transaction
Role: errorRole
Category: BW-Core
Description: Configuration error, checkpoint can not join transaction
Resolution: Correct configuration
BWENGINE-100086: Engine commands are not enabled
Role: errorRole
Category: BW-Plugin
Description: Engine commands are not enabled so Engine Command activity can
not be used
Resolution: Enable engine commands
BWENGINE-100087: Error invoking engine command [%1]
Role: errorRole
Category: BW-Plugin
Description: Error invoking specified engine command
Resolution: Please look at exception for more details
BWENGINE-100088: Library alias undefined [%1]
Role: errorRole
Category: BW-Core
Description: Cannot resolve library alias
Resolution: Provide valid library path for this alias
TIBCO ActiveMatrix BusinessWorks Error Codes
24
| Chapter 1
Process Engine
BWENGINE-100089: Library not found for alias [%1], path [%2]
Role: errorRole
Category: BW-Core
Description: Can not find library for specifed alias
Resolution: Provide valid library path for this alias
BWENGINE-100090: Invalid library file type for alias [%1], path [%2]
Role: errorRole
Category: BW-Core
Description: Library for this alias has invalid file type
Resolution: Provide valid library path for this alias
BWENGINE-100091: Library error for alias [%1], path [%2]
Role: errorRole
Category: BW-Core
Description: Library error for this alias
Resolution: Please look at exception for more details
BWENGINE-100092: Can not checkpoint in middle of a critical section
Role: errorRole
Category: BW-Core
Description: A checkpoint may not occur within a critical section group
Resolution: Correct process design
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 25
BWENGINE-100093: Required Lock object not specified
Role: errorRole
Category: BW-Core
Description: A multi-group critical section requires a lock object
Resolution: Configure a lock object
BWENGINE-100094: Process id [%1] not found
Role: errorRole
Category: BW-Core
Description: No process found with matching process id
Resolution: Use existing process id
BWENGINE-100095: Fault to catch has not been specified
Role: errorRole
Category: BW-Core
Description: Specify fault or select all
Resolution:
BWENGINE-100096: Duplicate catch activities [%1] [%2]
Role: errorRole
Category: BW-Core
Description: More than one catch activity with the same configuration
Resolution: Reconfigure catch activities so that they don't conflict with each other
TIBCO ActiveMatrix BusinessWorks Error Codes
26
| Chapter 1
Process Engine
BWENGINE-100097: Can not create/access pager directory [%1]
Role: errorRole
Category: BW-Core
Description: Problem encountered creating or accessing the pager directory
Resolution: Check available file space and permissions
BWENGINE-100100: Transition condition XPath has an error
Role: errorRole
Category: BW-Core
Description:
Resolution: Please look at the transition for more details
BWENGINE-100101: Loop over expression error
Role: errorRole
Category: BW-Core
Description:
Resolution: Please look at the group for more details
BWENGINE-100102: Repeat condition expression error
Role: errorRole
Category: BW-Core
Description:
Resolution: Please look at the group for more details
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 27
BWENGINE-100103: Error condition expression error
Role: errorRole
Category: BW-Core
Description:
Resolution: Please look at the group for more details
BWENGINE-100104: Variable [%1] has not been initialized
Role: errorRole
Category: BW-Plugin
Description: Tried to use variable contents that has not been initialized
Resolution: Initialize variable before using contents
BWENGINE-100105: Join failure exception
Role: errorRole
Category: BW-Plugin
Description: Join condition false and join exception not suppressed
Resolution: May be desired result. If not, redesign process definition accordingly.
BWENGINE-100106: Join condition error
Role: errorRole
Category: BW-Plugin
Description: Join condition XPATH expression has an error
Resolution: Correct join condition
TIBCO ActiveMatrix BusinessWorks Error Codes
28
| Chapter 1
Process Engine
BWENGINE-200001: Partition [%1] not loaded
Role: warnRole
Category: BW-Core
Description: Partition listed to load has not been loaded
Resolution:
BWENGINE-200002: no path from start to this point
Role: warnRole
Category: BW-Core
Description: This point can not be reached
Resolution:
BWENGINE-200003: Mapping Warning
Role: warnRole
Category: BW-Core
Description: Potential problem find with mapping
Resolution: Please look at mapping for more details
BWENGINE-200004: Checkpoint not included with transaction
Role: warnRole
Category: BW-Core
Description: Checkpoint taken before commit. Restart could happen before or
after commit.
Resolution: Reconfigure checkpoint database configuration
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 29
BWENGINE-200005: Join condition warning
Role: errorRole
Category: BW-Plugin
Description: Join condition XPATH expression has a warning
Resolution: Verify join condition
BWENGINE-300001: Process Engine %1
Role: infoRole
Category: BW-Core
Description: process engine versionn
Resolution:
BWENGINE-300002: Engine %1 started
Role: infoRole
Category: BW-Core
Description: engine started
Resolution:
BWENGINE-300003: Engine %1 started in backup mode
Role: infoRole
Category: BW-Core
Description: Indicates the named engine has been started FT backup mode
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
30
| Chapter 1
Process Engine
BWENGINE-300004: Engine %1 %2
Role: infoRole
Category: BW-Core
Description: Fault Tolerant actions
Resolution:
BWENGINE-300006: Engine %1 terminating
Role: infoRole
Category: BW-Core
Description: engine terminating
Resolution:
BWENGINE-300007: Process Started
Role: infoRole
Category: BW-Core
Description: A new process has been started
Resolution:
BWENGINE-300008: Process started tracking=%1
Role: infoRole
Category: BW-Core
Description: A new process has been started with associated tracking info
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 31
BWENGINE-300009: BW Plugins: %1
Role: infoRole
Category: BW-Core
Description: BW plugins.jar version
Resolution:
BWENGINE-300010: XML Support: %1
Role: infoRole
Category: BW-Core
Description: TIBCOXML version
Resolution:
BWENGINE-300011: Java version: %1 %2
Role: infoRole
Category: BW-Core
Description: Java VM name and version
Resolution:
BWENGINE-300012: OS version: %1 %2 %3
Role: infoRole
Category: BW-Core
Description: OS arch, name and version
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
32
| Chapter 1
Process Engine
BWENGINE-300013: Tibrv string encoding: %1
Role: infoRole
Category: BW-Core
Description: Tibrv string encoding
Resolution:
BWENGINE-300014: Starting delayed shutdown, max-delay=[%1], wait-for-checkpoints=[%2]
Role: infoRole
Category: BW-Core
Description: Processing delayed shutdown command
Resolution:
BWENGINE-300015: Statistics collection started, recording to [%1]
Role: infoRole
Category: BW-Core
Description: Starting activity statistics collection and recording to specified file
Resolution:
BWENGINE-300016: Statistics collection stopped
Role: infoRole
Category: BW-Core
Description: Stopping activity statistics collection and recording
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 33
BWENGINE-300017: Restarting [%1] for process [%2]
Role: infoRole
Category: BW-Core
Description: Restarting process instance from checkpoint
Resolution:
BWENGINE-300018: Found [%1] checkpoint(s) to be restarted
Role: infoRole
Category: BW-Core
Description: Shows number of checkpoints available to be restarted
Resolution:
BWENGINE-300019: Found [%1] checkpoint(s) auto restart NOT selected
Role: infoRole
Category: BW-Core
Description: Shows number of checkpoints available, but not to be auto restarted
Resolution:
BWENGINE-300020: Found [%1] recoverable checkpoint(s) preserved after process faulted
Role: infoRole
Category: BW-Core
Description: Shows number of checkpoints preserved after process terminated
with a fault
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
34
| Chapter 1
Process Engine
BWENGINE-300021: Resource [%1] changed its state from [%2] to [%3].
Role: infoRole
Category: BW-Core
Description: Resource state change information
Resolution:
BW-EXT-LOG-100000: %1
Role: errorRole
Category: LOG4J
Description: Error message logged by third party application or java code using
LOG4J api
Resolution: Refer to your third party application or java code
BW-EXT-LOG-100001: %1
Role: errorRole
Category: LOG4J
Description: Fatal error message logged by third party application or java code
using LOG4J api
Resolution: Refer to your third party application or java code
BW-EXT-LOG-100002: Unable to write the message logged by third party application or java
code to TIBCO BusinessWorks log file. %1
Role: errorRole
Category: LOG4J
Description: Error occurred while trying to forward the message logged by third
party application or java code to TIBCO BusinessWorks log file
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Process Engine Error Codes 35
BW-EXT-LOG-200000: %1
Role: warnRole
Category: LOG4J
Description: Warning message logged by third party application or java code
using LOG4J api
Resolution: Refer to your third party application or java code
BW-EXT-LOG-300000: %1
Role: infoRole
Category: LOG4J
Description: Info message logged by third party application or java code using
LOG4J api
Resolution: Refer to your third party application or java code
BW-EXT-LOG-300001: %1
Role: infoRole
Category: LOG4J
Description: Message logged by third party application or java code using LOG4J
api
Resolution: Refer to your third party application or java code
BW-EXT-LOG-300002: %1
Role: debugRole
Category: LOG4J
Description: Debug message logged by third party application or java code using
LOG4J api
Resolution: Refer to your third party application or java code
TIBCO ActiveMatrix BusinessWorks Error Codes
36
| Chapter 1
Process Engine
TIBCO ActiveMatrix BusinessWorks Error Codes
| 37
Chapter 2
Common Errors
Some error codes are common across activities within different palettes. This
chapter describes these errors.
Topics
•
Common Error Codes, page 38
TIBCO ActiveMatrix BusinessWorks Error Codes
38
| Chapter 2
Common Errors
Common Error Codes
BW-COMMON-100001: Configuration error in field [ %1 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value
Resolution: Please update the cofiguration data
BW-COMMON-100002: Configuration error in field [ %1 ] expecting a valid [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the cofiguration data for the field with value of the
indicated type
BW-COMMON-100003: Configuration error in field [ %1 ] expecting a value between [ %2 ] and
[ %3 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the cofiguration data
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 39
BW-COMMON-100004: Configuration error in field [ %1 ] the value must be non empty
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the cofiguration data
BW-COMMON-100005: Configuration error in field [ %1 ] the value must be a valid [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the cofiguration data
BW-COMMON-100006: Configuration error in field [ %1 ] the value must be a valid URI
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid URI
Resolution: Please specify a valid URI
BW-COMMON-100007: Configuration error in field [ %1 ] the value must be a valid URL
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid URL
Resolution: Please specify a valid URL
TIBCO ActiveMatrix BusinessWorks Error Codes
40
| Chapter 2
Common Errors
BW-COMMON-100008: Configuration error in field [ %1 ] the value must be a valid hostname
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid hostname
Resolution: Please specify a valid hostname
BW-COMMON-100009: Configuration error in field [ %1 ] the value must be a valid port number
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid port number
Resolution: Please specify a valid port number
BW-COMMON-100010: Configuration error in field [ %1 ] the value must be a valid number
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid number
Resolution: Please specify a valid number
BW-COMMON-100011: Configuration error in field [ %1 ] the value must be a valid timeout
value
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid timeout value
Resolution: Please specify a valid number between 1 and 32000
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 41
BW-COMMON-100012: Configuration error in field [ %1 ] the value must be a valid NCName
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid NCName type
from XML specification
Resolution: Please specify a valid NCName
BW-COMMON-100013: Configuration error in field [ %1 ] the value must be a valid XPath
expression
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid XPath expression
Resolution: Please specify a valid XPath
BW-COMMON-100014: Configuration error in field [ %1 ] the value must be a valid java
classname
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid Class name
Resolution: Please specify a valid Java Class name
BW-COMMON-100015: Configuration error in field [ %1 ] the value must be a valid file name
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid file name
Resolution: Please specify a valid file name
TIBCO ActiveMatrix BusinessWorks Error Codes
42
| Chapter 2
Common Errors
BW-COMMON-100016: Configuration error in field [ %1 ] the value must be a valid directory
name
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid directory name
Resolution: Please specify a valid directory name
BW-COMMON-100017: Configuration error in field [ %1 ] the value must be a valid event source
name
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid event source name
Resolution: Please specify a valid event source name
BW-COMMON-100018: Configuration error in field [ %1 ] the value must be a valid event source
name of type [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid event source name
of the specified kind
Resolution: Please specify a valid event source name of the specified kind
BW-COMMON-100019: Configuration error in field [ %1 ] the value must be a valid floating
point number
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid floating point
number
Resolution: Please specify a valid floating point number
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 43
BW-COMMON-100020: Configuration error in field [ %1 ] the value must be a valid double
number
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid double
Resolution: Please specify a valid double
BW-COMMON-100021: Configuration error in field [ %1 ] the value must be a valid encoding
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid encoding
Resolution: Please specify a valid encoding
BW-COMMON-100022: Configuration error in field [ %1 ] the specified encoding [ %2 ] not
supported
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid encoding
Resolution: Please specify a valid encoding
BW-COMMON-100023: Configuration error in field [ %1 ] the value must be a valid namespace
URI
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid namespace URI
Resolution: Please specify a valid namespace URI
TIBCO ActiveMatrix BusinessWorks Error Codes
44
| Chapter 2
Common Errors
BW-COMMON-100024: Configuration error in field [ %1 ] the value must be a valid schema
element
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid schema element
Resolution: Please specify a valid schema element
BW-COMMON-100025: Configuration error in field [ %1 ] the value must be a valid schema type
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid schema type
Resolution: Please specify a valid schema type
BW-COMMON-100026: Configuration error in field [ %1 ] the value must be a valid HTTP
connection resource
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid HTTP connection
Resolution: Please specify a valid HTTP Connection resource
BW-COMMON-100027: Configuration error in field [ %1 ] the value must be a valid TIBRV
connection resource
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid TIBRV connection
Resolution: Please specify a valid TIBRV Connection resource
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 45
BW-COMMON-100028: Configuration error in field [ %1 ] the value must be a valid JDBC
connection resource
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid JDBC connection
Resolution: Please specify a valid JDBC Connection resource
BW-COMMON-100029: Configuration error in field [ %1 ] the value must be a valid JMS
connection resource
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid JMS connection
Resolution: Please specify a valid JMS Connection resource
BW-COMMON-100030: Configuration error in field [ %1 ] the value must be a valid IC Server
connection
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid IC Server
connection
Resolution: Please specify a valid IC Server Connection resource
BW-COMMON-100031: Configuration error in field [ %1 ] the value must be a valid WSDL
message QName
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid WSDL message
QName
Resolution: Please specify a valid WSDL message QName
TIBCO ActiveMatrix BusinessWorks Error Codes
46
| Chapter 2
Common Errors
BW-COMMON-100032: Configuration error in field [ %1 ] the value must be a valid WSDL
portType QName
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid WSDL portType
QName
Resolution: Please specify a valid WSDL portType QName
BW-COMMON-100033: Configuration error in field [ %1 ] the value must be a valid WSDL
Service QName
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid WSDL Service
QName
Resolution: Please specify a valid WSDL Service QName
BW-COMMON-100034: Configuration error in field [ %1 ] the value must be a valid WSDL Port
Name in service [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid WSDL Port Name
Resolution: Please specify a valid WSDL Port Name
BW-COMMON-100035: Configuration error in field [ %1 ] the value must be a valid WSDL
Operation Name in portType [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid WSDL Operation
Name
Resolution: Please specify a valid WSDL Operation Name
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 47
BW-COMMON-100036: Configuration error in field [ %1 ] the value must be a valid proxy
resource
Role: errorRole
Category: BW_Plugins
Description: Please make sure that the specified field is a valid HTTP Proxy Name
Resolution: Please specify a valid HTTP Proxy Resource Name
BW-COMMON-100037: The server certificate [ %1 ] not found
Role: errorRole
Category: BW_Plugins
Description: The certificate path is invalid
Resolution: Please specify the valid certificate file
BW-COMMON-100038: An exception is received [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: Unexpected error
Resolution: Please contact TIBCO support
BW-COMMON-100039: Error initializing TIBCrypt [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: Unexpected error
Resolution: Please contact TIBCO support
TIBCO ActiveMatrix BusinessWorks Error Codes
48
| Chapter 2
Common Errors
BW-COMMON-100040: The client key [ %1 ] not found
Role: errorRole
Category: BW_Plugins
Description: The key file path may be invalid
Resolution: Please specify the valid key file
BW-COMMON-100041: Server certificate is invalid
Role: errorRole
Category: BW_Plugins
Description: The specified certificate is invalid
Resolution: Please specify the valid certificate
BW-COMMON-100042: Configuration error in field [ %1 ] the specified transport is not
supported
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid transport type
Resolution: Please contact TIBCO support to get a list of transport protocols
supported for this activity
BW-COMMON-100043: Configuration error. [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: Activity is not configured correctly
Resolution: Please check that the activity is configured correctly
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 49
BW-COMMON-100044: Inline schema error. [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: There was an error resolving an inline schema, or there was an error
with a reference from the inline to another schema resource.
Resolution: Please check the inline schema definition for errors. The error may
not be in the inline schema itself, but in a schema resource that is used by the
inline schema.
BW-COMMON-100045: Configuration error in field [ %1 ] the value must be a valid WSDL
Operation Name in port [ %2 ] in service [ %3 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid WSDL Operation
Name
Resolution: Please specify a valid WSDL Operation Name
BW-COMMON-100046: Configuration error in field [ %1 ] the value must be a positive integer
number
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid positive integer
number
Resolution: Please specify a valid positive integer number
TIBCO ActiveMatrix BusinessWorks Error Codes
50
| Chapter 2
Common Errors
BW-COMMON-100047: Configuration error: The metadate schema defined for the activity [ %1
] cannot be locked
Role: errorRole
Category: BW-Plugin
Description: The metadate schema defined for an activity cannot be locked
Resolution: Please look at exception for more details
BW-COMMON-100300: The partner [ %1 ] doesn't implement the specified operation [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the interface implemented by the partner does
define the specified operation
Resolution: Please specify a valid operation name
BW-COMMON-100301: Partner is not specified
Role: errorRole
Category: BW-Plugin
Description: Please specify a partner
Resolution: Check the configuration and make sure that a partner is specified
BW-COMMON-100302: Operation is not specified
Role: errorRole
Category: BW-Plugin
Description: Please specify an operation
Resolution: Check the configuration and make sure that an operation is specified
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 51
BW-COMMON-100303: Service is not specified
Role: errorRole
Category: BW-Plugin
Description: Please specify a service
Resolution: Check the configuration and make sure that a service is specified
BW-COMMON-100304: Port is not specified
Role: errorRole
Category: BW-Plugin
Description: Please specify a port
Resolution: Check the configuration and make sure that a port is specified
BW-COMMON-100305: The service name [ %1 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid service name
Resolution: Check the configuration and make sure that the service has a valid
name
BW-COMMON-100306: The port name [ %1 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid port name
Resolution: Check the configuration and make sure that the port has a valid name
TIBCO ActiveMatrix BusinessWorks Error Codes
52
| Chapter 2
Common Errors
BW-COMMON-100307: The operation name [ %1 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid operation name
Resolution: Check the configuration and make sure that the operation has a valid
name
BW-COMMON-100308: The binding type [ %1 ] is not supported
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid binding
Resolution: Check the configuration and make sure that the binding is valid
BW-COMMON-100309: The namespace of the service is not specified
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid namespace
Resolution: Check the configuration and make sure that the namespace of the
service is specified
BW-COMMON-100310: The namespace of the service [ %1 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid namespace
Resolution: Check the configuration and make sure that the namespace of the
service is valid
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 53
BW-COMMON-100311: The namespace of the port [ %1 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid namespace
Resolution: Check the configuration and make sure that the namespace of the
port is valid
BW-COMMON-100312: The port [ %1 ] doesn't have a binding or the binding associated with it
is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid binding
Resolution: Check the WSDL file and make sure that the port has a valid binding
BW-COMMON-100313: The port [ %1 ] doesn't have a PortType or the PortType associated with
it is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid PortType
Resolution: Check the WSDL file and make sure that the port has a valid
PortType
BW-COMMON-100314: The NOTIFICATION MEP is not supported
Role: errorRole
Category: BW-Plugin
Description: Please specify either a REQUEST-RESPONSE or a ONE-WAY
operation
Resolution: Check the style of the operation and make sure it is either
REQUEST-RESPONSE or ONE_WAY
TIBCO ActiveMatrix BusinessWorks Error Codes
54
| Chapter 2
Common Errors
BW-COMMON-100315: The SOLICIT-RESPONSE MEP is not supported
Role: errorRole
Category: BW-Plugin
Description: Please specify either a REQUEST-RESPONSE or a ONE-WAY
operation
Resolution: Check the style of the operation and make sure it is either
REQUEST-RESPONSE or ONE_WAY
BW-COMMON-100316: The Partner [ %1 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid partner name
Resolution: Check the configuration and make sure that a valid partner name is
specified
BW-COMMON-100317: Either the Partner [ %1 ] or the Operation [ %2 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid partner name and a valid operation name
Resolution: Check the configuration and make sure that both a valid partner and
a valid operation are specified
BW-COMMON-100318: The Event Source is not specified
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid event source name
Resolution: Check the configuration and make sure that a valid event source
name is specified
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 55
BW-COMMON-100319: The Event Source [ %1 ] is not valid
Role: errorRole
Category: BW-Plugin
Description: Please specify a valid event source name
Resolution: Check the configuration and make sure that a valid event source
name is specified
BW-COMMON-100320: A Reply activity cannot be used to reply to the selected Event Source.
The operation implemented is a ONE-WAY operation
Role: errorRole
Category: BW-Plugin
Description: A Reply activity can be used only when the operation implemented
by the selected Event Source has a REQUEST-RESPONSE message exchange
pattern
Resolution: Please remove the Reply activity or associate it with a different Event
Source
BW-COMMON-100501: Unexpected value [ %1 ] in the field [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value
Resolution: Please update the cofiguration data
BW-COMMON-100502: Input data error in field [ %1 ] expecting a valid [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the input data
TIBCO ActiveMatrix BusinessWorks Error Codes
56
| Chapter 2
Common Errors
BW-COMMON-100503: Input data error in field [ %1 ] expecting a value between [ %2 ] and [ %3
]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the cofiguration data
BW-COMMON-100504: Input data error in field [ %1 ] because [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value
Resolution: Please update the cofiguration data
BW-COMMON-100505: Input data error. [ %1 ]
Role: errorRole
Category: BW-Plugin
Description: Activity received incorrect value for the field(s) in the input tab.
Resolution: Reconfigure the TIBCO BusinessWorks process that contains this
activity to provide the correct value for the input field(s).
BW-COMMON-100601: Output data error in field [ %1 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value
Resolution: Please update the cofiguration data
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 57
BW-COMMON-100602: Output data error in field [ %1 ] expecting a valid [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the output data
BW-COMMON-100603: Output data error in field [ %1 ] expecting a value between [ %2 ] and [
%3 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the cofiguration data
BW-COMMON-100604: Output data error in field [ %1 ] because [ %2 ]
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value
Resolution: Please update the cofiguration data
BW-COMMON-100605: Output data error in field [ %1 ] value cannot be null
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the output data
TIBCO ActiveMatrix BusinessWorks Error Codes
58
| Chapter 2
Common Errors
BW-COMMON-100606: Output data error in field [ %1 ] value is not serializable
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field has a valid value as
indicated
Resolution: Please update the output data
BW-COMMON-101001: Error while serializing [ %1 ] message [ %2 ]
Role: errorRole
Category: BW_Plugin
Description: Error while serializing the message
Resolution: Please Contact TIBCO Support
BW-COMMON-101002: Error while deserializing [ %1 ] message [ %2 ]
Role: errorRole
Category: BW_Plugin
Description: Error while deserializing the message
Resolution: Please Contact TIBCO Support
BW-COMMON-101003: [ %1 ] operation timed out
Role: errorRole
Category: BW_Plugin
Description: Timeout error while waiting for reply
Resolution: Please check the remote server or increse the timeout value
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Common Error Codes 59
BW-COMMON-101004: Internal error occurred. [ %1 ]
Role: errorRole
Category: BW-Plugin
Description: Internal error has occured in the activity.
Resolution: Please contact TIBCO support
BW-COMMON-101005: Internal error occurred. Class=[ %1 ], Method=[ %2 ], Cause=[ %3 ]
Role: errorRole
Category: BW-Plugin
Description: Internal error has occured in the activity.
Resolution: Please contact TIBCO support
BW-COMMON-101006: Unable to get value for the global variable [ %1 ]
Role: errorRole
Category: BW_Plugin
Description: Unable to get value for the specified global variable
Resolution: Make sure that the specified global variable is defined.
BW-COMMON-101007: Unable to get value for the global variable [ %1 ] because [ %2 ]
Role: errorRole
Category: BW_Plugin
Description: Unable to get value for the specified global variable
Resolution: Make sure that the specified global variable is defined.
TIBCO ActiveMatrix BusinessWorks Error Codes
60
| Chapter 2
Common Errors
BW-COMMON-101008: The global variable [ %1 ] is not defined
Role: errorRole
Category: BW_Plugin
Description: Unable to get value for the specified global variable
Resolution: Make sure that the specified global variable is defined.
BW-MIME-100000: Configuration error in field [ %1 ] the value if present, must be a valid
directory name; the directory needs to have read/write permission
Role: errorRole
Category: BW-Plugin
Description: Please make sure that the specified field is a valid directory name
(the field can be empty) with the necessary read/write permission
Resolution: Please specify a valid directory name (the field can be empty) with
the necessary read/write permission
TIBCO ActiveMatrix BusinessWorks Error Codes
| 61
Chapter 3
XPath
This chapter describes error codes that are returned due to errors in XPath
expressions.
Topics
•
XPath Error Codes, page 62
TIBCO ActiveMatrix BusinessWorks Error Codes
62
| Chapter 3
XPath
XPath Error Codes
XPATH-100001: Null Content
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100002: Expected non-repeating, got repeating
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100003: Expected more than 1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100004: Exceeds maximum occurrence
Role: errorRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 63
XPATH-100005: Unexpected %1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100006: No functions in namespace:%1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100010: Cannot resolve prefix:%1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100011: Cannot resolve function without prefix.
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100012: No such function.
Role: errorRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
64
| Chapter 3
XPath
Resolution:
XPATH-100013: Expected 1 argument
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100014: Expected %1 arguments
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100015: Expected at least 1 argument
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100016: Expected at least %1 arguments
Role: errorRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 65
XPATH-100017: Expected %1 or %2 arguments
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100020: Expected a node-set
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100021: No matching %1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100022: Variable not defined
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100030: Interpreted as a double, rounded to: %1. Use a string constant for arbitrary
precision.
Role: errorRole
Category: BW-Core
TIBCO ActiveMatrix BusinessWorks Error Codes
66
| Chapter 3
XPath
Description:
Resolution:
XPATH-100031: Unterminated escape character. Use & for ampersand.
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100032: XPath indexes are 1 based.
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100100: Variable '%1' already defined in this template
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100101: Illegal variable name
Role: errorRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 67
XPATH-100110: The substituted type '%1' is not a sub-type of the element's type
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100111: Cannot load the schema for the type substitution
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100112: No such type in schema for the type substitution
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100113: Element is abstract and cannot appear in a valid document
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100114: Type is abstract and cannot appear in a valid document
Role: errorRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
68
| Chapter 3
XPath
Resolution:
XPATH-100115: This element is not allowed to be nil
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100116: Cannot load the schema for the element
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100117: Unexpected output, no such element in the schema
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100118: Unexpected output, no such element in the current context
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100119: Multiple schemas with namespace '%1' found, and no import to disambiguate
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 69
between them.
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100120: No formula expected on structure
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100130: Group-by required for for-each-group
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100131: Group-by must be the first child of for-each-group
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100132: Only 1 Group-by allowed for a for-each-group
Role: errorRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
70
| Chapter 3
XPath
Resolution:
XPATH-100140: Unexpected output, '%1'
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100141: Unexpected output, '%1'; exceeds maximum occurrence
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100142: Unexpected text output
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100143: Unexpected output, '%1'; got namepsace '%2', expected namespace '%3'
Role: errorRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 71
XPATH-100150: Value required for '%1'
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100151: Element '%1' required
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100152: Not all required components of '%1' are complete
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100153: The output generated inside '%1' is incomplete
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100154: The output generated inside '%1' is not valid
Role: errorRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
72
| Chapter 3
XPath
Resolution:
XPATH-100155: Missing preceding output terms
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100190: Components inside of '%1' contain errors
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100200: Change namespace to %1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100202: Rename to %1
Role: errorRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 73
XPATH-100203: Move to: %1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100204: Move to before: %1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100210: Copy-of incompatible; names match, but content differs
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100300: Formula has errors
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100301: Marker must be filled in
Role: errorRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
74
| Chapter 3
XPath
Resolution:
XPATH-100400: A 'when' statement cannot appear after an 'otherwise'
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100401: Only 1 'otherwise' statement is allowed in a 'choose'
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100402: Only 'when' and 'otherwise' can appear under 'choose'
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100410: All 'sort' statements must appear before anything else
Role: errorRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 75
XPATH-100420: Can generate more than the expected output of '%1'
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100421: The 'sort' statement must appear directly inside a 'for-each' or
'apply-templates' statement
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100500: Expected %1
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100501: Unexpected
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100502: Unexpected end of xpath
Role: errorRole
Category: BW-Core
TIBCO ActiveMatrix BusinessWorks Error Codes
76
| Chapter 3
XPath
Description:
Resolution:
XPATH-100503: a variable name
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-100600: Coercion error: '%1' (check coercion list)
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-200001: Possibly invalid conversion from %1 to %2
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200002: Always true
Role: warningRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 77
XPATH-200003: Converting a constant string to a boolean, always true
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200004: Will be converted as if by boolean(), recommend comparing to string
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200005: Will be converted as if by boolean(), recommend converting to a number
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200006: Always false
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200010: position() is relative to inside the filter; equivalent to 'true()' in this usage.
Role: warningRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
78
| Chapter 3
XPath
Resolution:
XPATH-200100: Statement contains no children; has no effect
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200101: Output is required, so the surrounding 'if' is not required
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200102: Input is not optional, so the surrounding 'if' is not required
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200103: Input is not a node set, so the surrounding 'if' is not recommended
Role: warningRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 79
XPATH-200110: Simplify to an xsi:nil attribute constant
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200120: The input and this element are both nillable, set to copy-nil
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200121: This element is not nillable
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200122: This input element is not nillable
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-200200: The referenced schema component has an error: %1
Role: warningRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
80
| Chapter 3
XPath
Resolution:
XPATH-200300: The term %1 is required but not generated in all cases of the choose
Role: warningRole
Category: BW-Core
Description:
Resolution:
XPATH-300001: Converted by %1
Role: infoRole
Category: BW-Core
Description:
Resolution:
XPATH-300100: Optimize by computing '%1' out of the predicate
Role: infoRole
Category: BW-Core
Description:
Resolution:
XPATH-301000: For element '%1', source schema has namespace '%2', the target has
namespace '%3'
Role: infoRole
Category: BW-Core
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XPath Error Codes 81
XPATH-301001: Source schema has name '%1', target has name '%2'
Role: infoRole
Category: BW-Core
Description:
Resolution:
XPATH-301002: Source schema has '%1', target has '%2'
Role: infoRole
Category: BW-Core
Description:
Resolution:
XPATH-400001: The statement 'stylesheet' cannot appear here
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-400101: Expected output '%1' before this
Role: errorRole
Category: BW-Core
Description:
Resolution:
XPATH-400102: Expected output '%1' at end of this
Role: errorRole
Category: BW-Core
Description:
TIBCO ActiveMatrix BusinessWorks Error Codes
82
| Chapter 3
XPath
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
| 83
Chapter 4
ActiveEnterprise Adapter Palette
This chapter describes error codes that can be returned by activities in the
ActiveEnterprise Adapter palette.
Topics
•
ActiveEnterprise Adapter Error Codes, page 84
TIBCO ActiveMatrix BusinessWorks Error Codes
84
| Chapter 4
ActiveEnterprise Adapter Palette
ActiveEnterprise Adapter Error Codes
BW-AE-100000: Cannot create Transport
Role: errorRole
Category: BW_Plugin
Description: Cannot create Transport
Resolution: Please Contact TIBCO Support
BW-AE-100001: Error in sending message
Role: errorRole
Category: BW_Plugin
Description: Error in sending message
Resolution: Please Contact TIBCO Support
BW-AE-100002: Error serializing the message
Role: errorRole
Category: BW_Plugin
Description: Error serializing the message
Resolution: Please Contact TIBCO Support
BW-AE-100003: Error in sending request
Role: errorRole
Category: BW_Plugin
Description: Error in sending request
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
ActiveEnterprise Adapter Error Codes 85
BW-AE-100004: Error in processing event: %1
Role: errorRole
Category: BW_Plugin
Description: Error in processing event
Resolution: Please Contact TIBCO Support
BW-AE-100005: Cannot create TibrvQueue: %1
Role: errorRole
Category: BW_Plugin
Description: Cannot create TibrvQueue
Resolution: Please Contact TIBCO Support
BW-AE-100006: Cannot create rvEventContext: %1
Role: errorRole
Category: BW_Plugin
Description: Cannot create rvEventContext
Resolution: Please Contact TIBCO Support
BW-AE-100007: Cannot create reply listener for subject: %1
Role: errorRole
Category: BW_Plugin
Description: Cannot create reply listener, for subject: %1
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
86
| Chapter 4
ActiveEnterprise Adapter Palette
BW-AE-100008: Cannot activate TIBRV listener for subject: %1
Role: errorRole
Category: BW_Plugin
Description: Cannot activate TIBRV listener for subject: %1
Resolution: Please Contact TIBCO Support
BW-AE-100009: Error in sending reply
Role: errorRole
Category: BW_Plugin
Description: Error in sending reply
Resolution: Please Contact TIBCO Support
BW-AE-100010: Error in confirming the message
Role: errorRole
Category: BW_Plugin
Description: Error in sending reply
Resolution: Please Contact TIBCO Support
BW-AE-100011: RPC Server returned error message.
Role: errorRole
Category: BW_Plugin
Description: RPC Server returned error message.
Resolution: Please check the RPC exception data for more information
TIBCO ActiveMatrix BusinessWorks Error Codes
|
ActiveEnterprise Adapter Error Codes 87
BW-AE-100012: Error while serializing the message.
Role: errorRole
Category: BW_Plugin
Description: Error while serializing the message
Resolution: Please Contact TIBCO Support
BW-AE-100013: Error while deserializing the message.
Role: errorRole
Category: BW_Plugin
Description: Error while deserializing the message
Resolution: Please Contact TIBCO Support
BW-AE-100014: Timeout waiting for reply.
Role: errorRole
Category: BW_Plugin
Description: Timeout waiting for reply
Resolution: Please Contact TIBCO Support
BW-AE-100015: Subject used in the Transport of the Activity is different from the Adapter
Service.
Role: errorRole
Category: BW_Plugin
Description: Subject used in the Transport of the Activity is different from the
Adapter Service
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
88
| Chapter 4
ActiveEnterprise Adapter Palette
BW-AE-100016: RV Service used in the Transport of the Activity is different from the Adapter
Service.
Role: errorRole
Category: BW_Plugin
Description: RV Service used in the Transport of the Activity is different from the
Adapter Service
Resolution: Please Contact TIBCO Support
BW-AE-100017: RV Network used in the Transport of the Activity is different from the Adapter
Service.
Role: errorRole
Category: BW_Plugin
Description: RV Network used in the Transport of the Activity is different from
the Adapter Service
Resolution: Please Contact TIBCO Support
BW-AE-100018: RV Daemon used in the Transport of the Activity is different from the Adapter
Service.
Role: errorRole
Category: BW_Plugin
Description: RV Daemon used in the Transport of the Activity is different from
the Adapter Service
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
ActiveEnterprise Adapter Error Codes 89
BW-AE-100019: JMS Topic used in the Transport of the Activity is different from the Adapter
Service.
Role: errorRole
Category: BW_Plugin
Description: JMS Topic used in the Transport of the Activity is different from the
Adapter Service
Resolution: Please Contact TIBCO Support
BW-AE-100020: JMS Queue used in the Transport of the Activity is different from the Adapter
Service.
Role: errorRole
Category: BW_Plugin
Description: JMS Queue used in the Transport of the Activity is different from the
Adapter Service
Resolution: Please Contact TIBCO Support
BW-AE-100021: The Adapter Service being connected to may use a SSL option different from
the BW Activity.
Role: errorRole
Category: BW_Plugin
Description: The Adapter Service being connected to may use a SSL option
different from the BW Activity.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
90
| Chapter 4
ActiveEnterprise Adapter Palette
BW-AE-100022: The Adapter Service being connected to may use a different JMS URL from
the BW Activity.
Role: errorRole
Category: BW_Plugin
Description: The Adapter Service being connected to may use a different JMS
URL from the BW Activity.
Resolution: Please Contact TIBCO Support
BW-AE-100023: RV Subject is a required field.
Role: errorRole
Category: BW_Plugin
Description: RV Subject is a required field.
Resolution: Please Contact TIBCO Support
BW-AE-100024: JMS Topic is a required field.
Role: errorRole
Category: BW_Plugin
Description: JMS Topic is a required field.
Resolution: Please Contact TIBCO Support
BW-AE-100025: JMS Queue is a required field.
Role: errorRole
Category: BW_Plugin
Description: JMS Queue is a required field.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
ActiveEnterprise Adapter Error Codes 91
BW-AE-100026: JMS Url is a required field.
Role: errorRole
Category: BW_Plugin
Description: JMS Url is a required field.
Resolution: Please Contact TIBCO Support
BW-AE-100027: AE metadata loading error: class %1 not found.
Role: errorRole
Category: BW_Plugin
Description: AE metadata loading error: class %1 not found.
Resolution: Please Contact TIBCO Support
BW-AE-100028: Failed to load request metadata for operation %1 in class %2.
Role: errorRole
Category: BW_Plugin
Description: Failed to load request metadata for operation %1 in class %2.
Resolution: Please Contact TIBCO Support
BW-AE-100029: Can't load the ProcessStarter %1.
Role: errorRole
Category: BW_Plugin
Description: Can't load the ProcessStarter %1.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
92
| Chapter 4
ActiveEnterprise Adapter Palette
BW-AE-100030: AE plugin configuration error: %1
Role: errorRole
Category: BW-Plugin
Description: AE plugin configuration error. Details provided
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
| 93
Chapter 5
File Palette
This chapter describes error codes that can be returned by activities in the File
palette.
Topics
•
File Error Codes, page 94
TIBCO ActiveMatrix BusinessWorks Error Codes
94
| Chapter 5
File Palette
File Error Codes
BW-FILE-100000: File name [%1] is not valid
Role: errorRole
Category: BW_Plugin
Description: The file name is not valid
Resolution: Correct the filename or the mapping used to create the file name
BW-FILE-100001: File [%1] was not found
Role: errorRole
Category: BW_Plugin
Description: The file was not found
Resolution: Correct the filename or the mapping used to create the file name
BW-FILE-100002: File [%1] already exists
Role: errorRole
Category: BW_Plugin
Description: The file already exists
Resolution: Correct the filename or the mapping used to create the file name
BW-FILE-100003: An IO exception occurred while trying to write to the file [%1]
Role: errorRole
Category: BW_Plugin
Description: An IO exception occurred while trying to write to the file
Resolution: System error
TIBCO ActiveMatrix BusinessWorks Error Codes
|
File Error Codes 95
BW-FILE-100004: File [%1] cannot be created
Role: errorRole
Category: BW_Plugin
Description: File cannot be created
Resolution: System error
BW-FILE-100005: Cannot read the binary content for the file [%1]
Role: errorRole
Category: BW_Plugin
Description: Unable to get the file content in binary form
Resolution: System error
BW-FILE-100006: Cannot read the string content for the file [%1]
Role: errorRole
Category: BW_Plugin
Description: Unable to get the file content in string form
Resolution: System error
BW-FILE-100007: The encoding [%1] is not valid
Role: errorRole
Category: BW_Plugin
Description: The encoding is not valid
Resolution: Check the encoding to make sure it is supported
TIBCO ActiveMatrix BusinessWorks Error Codes
96
| Chapter 5
File Palette
BW-FILE-100008: The content provided is not base 64 binary
Role: errorRole
Category: BW_Plugin
Description: The file was not found
Resolution: Check the input data
BW-FILE-100009: Cannot rename the file [%1] to [%2]
Role: errorRole
Category: BW_Plugin
Description: Cannot rename the file
Resolution: System error
BW-FILE-100010: Cannot rename the file [%1] to [%2]. The destination file exists and its type is
different then the type of the source file
Role: errorRole
Category: BW_Plugin
Description: Cannot rename the file]. The destination file exists and its type is
different then the type of the source file
Resolution: Check input data
BW-FILE-100011: This activity cannot be used to move a directory
Role: errorRole
Category: BW_Plugin
Description: This activity cannot be used to move a directory
Resolution: See the documentation of the File Rename Activity
TIBCO ActiveMatrix BusinessWorks Error Codes
|
File Error Codes 97
BW-FILE-100012: Cannot remove the file [%1]
Role: errorRole
Category: BW_Plugin
Description: Cannot remove the file
Resolution: System error
BW-FILE-100013: An IO exception occurred while trying to create the file [%1]
Role: errorRole
Category: BW_Plugin
Description: An IO exception occurred while trying to create the file
Resolution: System error
BW-FILE-100014: You cannot overwrite the following file [%1] to file [%2] if the overwrite flag is
not selected.
Role: errorRole
Category: BW_Plugin
Description:
Resolution: May need to set Overwrite property on activity Configuration
BW-FILE-100015: You cannot copy a directory [%1] to an existing file [%2]
Role: errorRole
Category: BW_Plugin
Description: You cannot copy a directory to an existing file
Resolution: Change from file path
TIBCO ActiveMatrix BusinessWorks Error Codes
98
| Chapter 5
File Palette
BW-FILE-100016: You cannot copy multiple files [%1] to an existing file [%2]
Role: errorRole
Category: BW_Plugin
Description: You cannot copy mutiple files to an existing file
Resolution: Change from file path
BW-FILE-100017: Cannot create missing path [%1]
Role: errorRole
Category: BW_Plugin
Description: Cannot create missing path
Resolution: May need to set Create Missing Dirs property on activity
Configuration
BW-FILE-100018: Cannot copy file [%1] to file [%2]
Role: errorRole
Category: BW_Plugin
Description: Cannot copy file
Resolution: System Error
TIBCO ActiveMatrix BusinessWorks Error Codes
| 99
Chapter 6
FTP Palette
This chapter describes error codes that can be returned by activities in the FTP
palette.
Topics
•
FTP Error Codes, page 100
TIBCO ActiveMatrix BusinessWorks Error Codes
100
| Chapter 6
FTP Palette
FTP Error Codes
BW-FTP-100000: FTP connection is required.
Role: errorRole
Category: BW_Plugin
Description: FTP connection is required.
Resolution: Please Contact TIBCO Support
BW-FTP-100001: Cannot perform FTP Operation: %1. Error Info: %2
Role: errorRole
Category: BW_Plugin
Description: Cannot perform FTP Operation: %1. Error Info: %2
Resolution: Please Contact TIBCO Support
BW-FTP-100002: Cannot establish FTP connection when performing FTP function: %1. Error
Info: %2
Role: errorRole
Category: BW_Plugin
Description: Cannot establish FTP connection when performing FTP function:
%1. Error Info: %2
Resolution: Please Contact TIBCO Support
BW-FTP-100003: File %1 already exists.
Role: errorRole
Category: BW_Plugin
Description: File %1 already exists.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
FTP Error Codes 101
BW-FTP-100004: Error in PUT or MPUT command. See Error Tab for details.
Role: errorRole
Category: BW_Plugin
Description: Error in PUT or MPUT command. See Error Tab for details.
Resolution: Please Contact TIBCO Support
BW-FTP-100005: Error in GET or MGET command. See Error Tab for details.
Role: errorRole
Category: BW_Plugin
Description: Error in GET or MGET command. See Error Tab for details.
Resolution: Please Contact TIBCO Support
BW-FTP-100006: FTP Connection Succeeded. Target System: %1.
Role: infoRole
Category: BW_Plugin
Description: FTP Connection Succeeded. Target System: %1.
Resolution: Please Contact TIBCO Support
BW-FTP-100007: Client is not initialized: %1.
Role: errorRole
Category: BW-Plugin
Description: Client is not initialized: %1.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
102
| Chapter 6
FTP Palette
BW-FTP-100008: Connection timeout.
Role: errorRole
Category: BW-Plugin
Description: Connection timeout.
Resolution: Please Contact TIBCO Support
BW-FTP-100009: Local file specified cannot be found.
Role: errorRole
Category: BW-Plugin
Description: Local file specified cannot be found.
Resolution: Please Contact TIBCO Support
BW-FTP-100010: Global variable %1 not defined.
Role: errorRole
Category: BW-Plugin
Description: Global variable %1 not defined.
Resolution: Please Contact TIBCO Support
BW-FTP-100011: Unexpected reply code. Returned Code: %1 Expected Code: %2.
Role: errorRole
Category: BW-Plugin
Description: Unexpected reply code. Returned Code: %1. Expected Code: %2.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
FTP Error Codes 103
BW-FTP-100012: Invalid user name or password
Role: errorRole
Category: BW-Plugin
Description: Invalid user name or password
Resolution: Please Contact TIBCO Support
BW-FTP-100013: Error in executing remote command: %1
Role: errorRole
Category: BW-Plugin
Description: Error in executing remote command: %1
Resolution: Please Contact TIBCO Support
BW-FTP-100014: Connection reference is missing.
Role: errorRole
Category: BW-Plugin
Description: Connection reference is missing.
Resolution: Please Contact TIBCO Support
BW-FTP-100015: Cannot access firewall.
Role: errorRole
Category: BW-Plugin
Description: Cannot access firewall.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
104
| Chapter 6
FTP Palette
BW-FTP-100016: Field %1 is required.
Role: errorRole
Category: BW-Plugin
Description: Field %1 is required.
Resolution: Please Contact TIBCO Support
BW-FTP-100017: FTP Connection Test Failed. Validate Host Name: %1.
Role: errorRole
Category: BW-Plugin
Description: FTP Connection Test Failed. Validate Host Name: %1.
Resolution: Please Contact TIBCO Support
BW-FTP-100018: FTP Connection Test Failed. Error: %1.
Role: errorRole
Category: BW-Plugin
Description: FTP Connection Test Failed. Error: %1.
Resolution: Please Contact TIBCO Support
BW-FTP-100019: File %1 does not exist.
Role: errorRole
Category: BW-Plugin
Description: File %1 does not exist.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
FTP Error Codes 105
BW-FTP-100020: Trusted Certificate location not specified in SSL Configuration
Role: errorRole
Category: BW-Plugin
Description: Trusted Certificate location not specified in SSL Configuration
Resolution: Please Contact TIBCO Support
BW-FTP-100021: Error compiling trusted certificate. Reason : %1
Role: errorRole
Category: BW-Plugin
Description: Error compiling trusted certificate. Reason : %1
Resolution: Please Contact TIBCO Support
BW-FTP-100022: Error compiling client identity. Reason : %1
Role: errorRole
Category: BW-Plugin
Description: Error compiling client identity. Reason : %1
Resolution: Please Contact TIBCO Support
BW-FTP-100023: Error creating SSL client. Reason : %1
Role: errorRole
Category: BW-Plugin
Description: Error creating SSL client. Reason : %1
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
106
| Chapter 6
FTP Palette
BW-FTP-100024: Error creating secure socket. Reason : %1
Role: errorRole
Category: BW-Plugin
Description: Error creating secure socket. Reason : %1
Resolution: Please Contact TIBCO Support
BW-FTP-100025: Error establishing active data socket. Reason : %1
Role: errorRole
Category: BW-Plugin
Description: Error establishing active data socket. Reason : %1
Resolution: Please Contact TIBCO Support
BW-FTP-100026: Error changing remote working directory. Reason : input is null
Role: errorRole
Category: BW-Plugin
Description: Error changing remote working directory. Reason : input is null
Resolution: Please Contact TIBCO Support
BW-FTP-100027: Error doing mget. Reason: mget is not supported for FTP via Proxy
Role: errorRole
Category: BW-Plugin
Description: Error doing mget. Reason: mget is not supported for FTP via Proxy
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
| 107
Chapter 7
General Activities Palette
This chapter describes error codes that can be returned by activities in the General
Activities palette.
Topics
•
General Activities Error Codes, page 108
TIBCO ActiveMatrix BusinessWorks Error Codes
108
| Chapter 7
General Activities Palette
General Activities Error Codes
BW-GENERAL-100001: Notify Configuration not specified
Role: errorRole
Category: BW-Plugin
Description: Notify Configuration not specified
Resolution: Please specify shared configuration
BW-GENERAL-100002: Unable to construct notification data for wait/receive activity
Role: errorRole
Category: BW-Plugin
Description: Unexpected internal error occurs. Unable to construct notification
data for wait/receive activity
Resolution: Please contact TIBCO support
BW-GENERAL-100003: Unable to lock schema for notify input
Role: errorRole
Category: BW-Plugin
Description: Unable to lock schema for otify input
Resolution: Please look at exception for more details
BW-GENERAL-100004: Internal schema error occurs
Role: errorRole
Category: BW-Plugin
Description: Internal schema error occurs
Resolution: Please look at exception for more details
TIBCO ActiveMatrix BusinessWorks Error Codes
|
General Activities Error Codes 109
BW-GENERAL-100005: Unable to resolve shared configuration reference for [%1]
Role: errorRole
Category: BW-Plugin
Description: Unable to resolve shared configuration reference for [%1]
Resolution: Please look at exception for more details
BW-GENERAL-202001: Cannot cancel wait on group [%1] key [%2]
Role: warnRole
Category: BW-Plugin
Description: Cannot cancel wait on group [%1] key [%2]
Resolution: Please look at exception for more details
BW-GENERAL-202002: Receive error notification in [%1]
Role: warnRole
Category: BW-Plugin
Description: Receive error notification in [%1]
Resolution: Please look at exception for more details
BW-GENERAL-202003: Error occurs after getting notification data in [%1]
Role: warnRole
Category: BW-Plugin
Description: Error occurs after getting notification data in [%1]
Resolution: Please look at exception for more details
TIBCO ActiveMatrix BusinessWorks Error Codes
110
| Chapter 7
General Activities Palette
BW-GENERAL-202004: Wait for notification failed for [%1], set inactive
Role: warnRole
Category: BW-Plugin
Description: Wait for notification failed for [%1], set inactive
Resolution: Please look at exception for more details
BW-GENERAL-202005: Wait thread internal error for [%1], set inactive
Role: warnRole
Category: BW-Plugin
Description: Wait thread internal error for [%1], set inactive
Resolution: Please look at exception for more details
BW-JNDI-100001: Configuration Test Failed. %1
Role: errorRole
Category: BW_Plugin
Description: Unable to establish connection to the server.
Resolution: Please correct the error stated in the exception message and retry.
BW-JNDI-100002: Configuration Test Failed. Exception [%1] occurred.
Role: errorRole
Category: BW_Plugin
Description: Unable to establish connection to the server. Exception occurred
Resolution: Please correct the error stated in the exception message and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
General Activities Error Codes 111
BW-JNDI-100003: The JNDI Configuration reference [%1] not found
Role: errorRole
Category: BW_Plugin
Description: Unable to obtain the specified JNDI Configuration shared resource
reference
Resolution: Please correct the error and retry.
BW-JNDI-100004: The JNDI Configuration reference [%1] not found in repository
Role: errorRole
Category: BW_Plugin
Description: The repository does not contain the specified JNDI Configuration
shared resource reference
Resolution: Please correct the error and retry.
BW-JNDI-100005: The JNDI Configuration reference [%1] contains incorrect field values.
Role: errorRole
Category: BW_Plugin
Description: The JNDI Configuration shared resource referenced contains invalid
field values.
Resolution: Please correct the error and retry.
BW-JNDI-100006: Exception occurred while trying to obtain the JNDI Configuration reference
[%1]: %2
Role: errorRole
Category: BW_Plugin
Description: Unable to obtain the JNDI Configuration shared resource reference
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
112
| Chapter 7
General Activities Palette
BW-JTAUT-400000: %1
Role: debugRole
Category: BW_Plugin
Description: Debug Trace Message
Resolution: None
BW-CMD-100001: Error executing external command %1: %2.
Role: errorRole
Category: BW_Plugin
Description: Error executing external command %1: %2.
Resolution: Check command value in configuration and input.
BW-CMD-100002: Error accessing file or directory %1: %2. Check file or directory name and
permissions.
Role: errorRole
Category: BW_Plugin
Description: Error accessing file or directory %1: %2. Check file or directory name
and permissions.
Resolution: Ensure that output file has write permissions for user running engine
and that sufficient disk space is available for writing output file. Ensure that
working directory exists and is accessible for user running engine.
BW-CMD-100003: No command specified.
Role: errorRole
Category: BW_Plugin
Description: No command specified.
Resolution: Provide a command in configuration or input.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
General Activities Error Codes 113
BW-TIMER-100000: Invalid start time [%1], correct format is [%2]
Role: errorRole
Category: BW_Plugin
Description: The format of the start time must conform to the standard format.
Resolution: Update the global variable to use the correct format.
TIBCO ActiveMatrix BusinessWorks Error Codes
114
| Chapter 7
General Activities Palette
TIBCO ActiveMatrix BusinessWorks Error Codes
| 115
Chapter 8
HTTP Palette
This chapter describes error codes that can be returned by activities in the HTTP
palette.
Topics
•
HTTP Error Codes, page 116
TIBCO ActiveMatrix BusinessWorks Error Codes
116
| Chapter 8
HTTP Palette
HTTP Error Codes
BW-HTTP-100000: The Http Server replied with a 4XX status code
Role: errorRole
Category: BW_Plugin
Description: The request contains bad syntax or cannot be fulfilled
Resolution: Correct the configuration (input data) of the Http Request activity
BW-HTTP-100001: The Http Server replied with a 5XX status code
Role: errorRole
Category: BW_Plugin
Description: The server failed to fulfill an apparently valid request
Resolution: See the documentation
BW-HTTP-100100: An exception was thrown while trying to initialize the Http client
Role: errorRole
Category: BW_Plugin
Description: An exception was thrown while trying to initialize the Http client
Resolution: System exception
BW-HTTP-100102: An exception occurred while trying to initialize the Http server
Role: errorRole
Category: BW_Plugin
Description: An exception occurred while trying to initialize the Http server
Resolution: System exception
TIBCO ActiveMatrix BusinessWorks Error Codes
|
HTTP Error Codes 117
BW-HTTP-100103: There are more than one Http event sources registered on [ %1 ]
Role: errorRole
Category: BW_Plugin
Description: There are more than one Http event sources registered on a specific
port
Resolution: Make sure there is no more than one Http event source (signal-in
activity) that use a specific Http Connection Shared Resource.
BW-HTTP-100104: The trusted CA store was not specified
Role: errorRole
Category: BW_Plugin
Description: The trusted CA store was not specified
Resolution: Make sure the trusted CA store is specified
BW-HTTP-100105: An exception occurred while trying to build the input class.
Role: errorRole
Category: BW_Plugin
Description: A schema specific exception occurred while trying to build the input
class.
Resolution: System error
BW-HTTP-100106: An exception occurred while trying to build the output class.
Role: errorRole
Category: BW_Plugin
Description: A schema specific exception occurred while trying to build the
output class.
Resolution: System error
TIBCO ActiveMatrix BusinessWorks Error Codes
118
| Chapter 8
HTTP Palette
BW-HTTP-100107: A repository exception was thrown while trying to load the identity.
Role: errorRole
Category: BW_Plugin
Description: A repository exception was thrown while trying to load the identity.
Resolution: Make sure the file that contains the private key can be read.
BW-HTTP-100108: A security exception was thrown while trying to load the identity.
Role: errorRole
Category: BW_Plugin
Description: A security exception was thrown while trying to load the identity.
Resolution: Make sure the format of the file that contains the private key is
supported.
BW-HTTP-100109: An IO exception whas thrown while trying to load the identity.
Role: errorRole
Category: BW_Plugin
Description: An IO exception whas thrown while trying to load the identity.
Resolution: Make sure the file that contains the private key exists and is readable.
BW-HTTP-100110: An IO exception whas thrown while trying to load the trusted CA store.
Role: errorRole
Category: BW_Plugin
Description: An IO exception whas thrown while trying to load the trusted CA
store.
Resolution: Make sure the certificates that are stored in the trusted CA store are
valid. See the documentation.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
HTTP Error Codes 119
BW-HTTP-100111: A security exception whas thrown while trying to load the trusted CA store.
Role: errorRole
Category: BW_Plugin
Description: A security exception whas thrown while trying to load the trusted
CA store.
Resolution: Make sure the certificates that are stored in the trusted CA store are
valid. See the documentation.
BW-HTTP-100112: A CertificateException whas thrown while trying to load a particular
certificate from the trusted CA store.
Role: errorRole
Category: BW_Plugin
Description: A CertificateException whas thrown while trying to load a particular
certificate from the trusted CA store.
Resolution: Make sure the certificates that are stored in the trusted CA store are
valid. See the documentation.
BW-HTTP-100113: The Identity [ %1 ] is not valid.
Role: errorRole
Category: BW_Plugin
Description: The Identity [ %1 ] is not valid.
Resolution: See the documentation
BW-HTTP-100114: The Identity is not specified
Role: errorRole
Category: BW_Plugin
Description: The Identity is not specified
Resolution: Make sure the Identity name is specified
TIBCO ActiveMatrix BusinessWorks Error Codes
120
| Chapter 8
HTTP Palette
BW-HTTP-100115: A security exception was thrown while trying to initialize the HTTPS server
Role: errorRole
Category: BW_Plugin
Description: A security exception was thrown while trying to initialize the HTTPS
server
Resolution: System error
BW-HTTP-100116: A lifecycle exception was thrown while trying to initialize the Tomcat server
Role: errorRole
Category: BW_Plugin
Description: A lifecycle exception was thrown while trying to initialize the
Tomcat server
Resolution: System error
BW-HTTP-100117: An IO exception was thrown while trying to create the web server file
structure
Role: errorRole
Category: BW_Plugin
Description: An IO exception was thrown while trying to create the web server
file structure
Resolution: System error
BW-HTTP-100118: An exception was thrown while trying to load the proxy's identity
Role: errorRole
Category: BW_Plugin
Description: An exception was thrown while trying to load the proxy's identity
Resolution: System error.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
HTTP Error Codes 121
BW-HTTP-100119: An exception was thrown while trying to load the proxy
Role: errorRole
Category: BW_Plugin
Description: An exception was thrown while trying to load the proxy
Resolution: System error.
BW-HTTP-100120: An exception was thrown while trying to load the identity used for basic
Http authentication
Role: errorRole
Category: BW_Plugin
Description: An exception was thrown while trying to load the identity used for
basic Http authentication
Resolution: System error.
BW-HTTP-100121: An exception occurred while trying to initialize the Http server: %1
Role: errorRole
Category: BW_Plugin
Description: An exception occurred while trying to initialize the Http server
Resolution: System exception
BW-HTTP-100123: The Identity on the Proxy Connection is not valid
Role: errorRole
Category: BW_Plugin
Description: The Identity on the Proxy Connection is not valid. Please use a
UsernamePassword Identity
Resolution: Correct the Identity
TIBCO ActiveMatrix BusinessWorks Error Codes
122
| Chapter 8
HTTP Palette
BW-HTTP-100124: The Identity for the basic authentication was not specified
Role: errorRole
Category: BW_Plugin
Description: The Identity for the basic authentication was not specified
Resolution: Make sure the Identity name is specified
BW-HTTP-100125: The Identity [ %1 ] cannot be referenced in this context
Role: errorRole
Category: BW_Plugin
Description: The Identity [ %1 ] cannot be referenced in this context
Resolution: See the documentation
BW-HTTP-100126: The Parameter Name [ %1 ] is not valid
Role: errorRole
Category: BW_Plugin
Description: The Parameter Name [ %1 ] is not valid
Resolution: Fix the name of the parameter
BW-HTTP-100127: The Parameter Name [ %1 ] is already specified
Role: errorRole
Category: BW_Plugin
Description: The Parameter Name [ %1 ] is already specified
Resolution: Remove one of the parameters
TIBCO ActiveMatrix BusinessWorks Error Codes
|
HTTP Error Codes 123
BW-HTTP-100128: The HTTP Connection Resource is not specified
Role: errorRole
Category: BW_Plugin
Description: The HTTP Connection Resource is not specified
Resolution: Specify an HTTP Connection Resource
BW-HTTP-100201: A POST Method cannot send parameters if the message body is specified
Role: errorRole
Category: BW_Plugin
Description: A POST Method cannot send parameters if the message body is
specified
Resolution: Correct the input data.
BW-HTTP-100202: A GET Method doesn't have a message body
Role: errorRole
Category: BW_Plugin
Description: A GET Method doesn't have a message body
Resolution: Correct the input data. Make sure that the message body is not
specified for a GET request
BW-HTTP-100203: Invalid endpoint URL. The host name is not specified
Role: errorRole
Category: BW_Plugin
Description: Invalid endpoint URL. The host name is not specified
Resolution: Correct either the configuration or the input data. Make sure that the
host name is specified.
TIBCO ActiveMatrix BusinessWorks Error Codes
124
| Chapter 8
HTTP Palette
BW-HTTP-100204: Invalid endpoint URL
Role: errorRole
Category: BW_Plugin
Description: Invalid endpoint URL
Resolution: Correct either the configuration or the input data.
BW-HTTP-100205: Invalid input data. The encoding is not supported
Role: errorRole
Category: BW_Plugin
Description: Invalid input data. The encoding is not supported
Resolution: Correct the input data. Make sure the encoding is supported. See the
documentation.
BW-HTTP-100206: The http method [ %1 ] is not valid
Role: errorRole
Category: BW_Plugin
Description: The specified HTTP method is not valid
Resolution: Correct the input data. Make sure that the HTTP method is valid
BW-HTTP-100207: The status line [ %1 ] is not valid
Role: errorRole
Category: BW_Plugin
Description: The status line is not valid. The right format is X Y Z, where X - the
HTTP version, Y - the status code, Z - the reason phrase
Resolution: See the documentation
TIBCO ActiveMatrix BusinessWorks Error Codes
|
HTTP Error Codes 125
BW-HTTP-100208: An exception was thrown while trying to url-encode the data
Role: errorRole
Category: BW_Plugin
Description: An exception was thrown while trying to url-encode the data.
Resolution: See the documentation
BW-HTTP-100209: Attachment not supported for HTTP method %1. Only HTTP 'POST' can
send attachments
Role: errorRole
Category: BW_Plugin
Description: Attachment not supported for HTTP method %1. Only HTTP 'POST'
can send attachments
Resolution: See the documentation
BW-HTTP-100210: Error serializing attachment data, Cause: %1
Role: errorRole
Category: BW_Plugin
Description: Error serializing attachment data, Cause: %1
Resolution: See the documentation
BW-HTTP-100299: The input data is not valid
Role: errorRole
Category: BW_Plugin
Description: The input data is not valid
Resolution: See the documentation
TIBCO ActiveMatrix BusinessWorks Error Codes
126
| Chapter 8
HTTP Palette
BW-HTTP-100300: An IOException was thrown while trying to execute the Http method
Role: errorRole
Category: BW_Plugin
Description: An IOException was thrown while trying to execute the Http
method
Resolution: System exception
BW-HTTP-100301: An exception was thrown while trying to execute the Http method. The
Reason-code is [ %1 ]
Role: errorRole
Category: BW_Plugin
Description: An exception was thrown while trying to execute the Http method.
Resolution: System exception
BW-HTTP-100302: An IOException was thrown while trying to read the response
Role: errorRole
Category: BW_Plugin
Description: An IOException was thrown while trying to read the response
Resolution: System exception
BW-HTTP-100303: An IOException was thrown while trying to send the response
Role: errorRole
Category: BW_Plugin
Description: An IOException was thrown while trying to send the response
Resolution: System exception
TIBCO ActiveMatrix BusinessWorks Error Codes
|
HTTP Error Codes 127
BW-HTTP-100304: An Exception was thrown while trying to send the response
Role: errorRole
Category: BW_Plugin
Description: An Exception was thrown while trying to send the response
Resolution: System exception
BW-HTTP-100305: An exception was thrown while trying to send the Http request
Role: errorRole
Category: BW_Plugin
Description: An exception was thrown while trying to send the Http request
Resolution: System exception
BW-HTTP-100400: The incoming Http message cannot be deserialized
Role: errorRole
Category: BW_Plugin
Description: The incoming Http message cannot be deserialized
Resolution: There is probabily an error on the Http client that invokes this service
BW-HTTP-100500: Using the following HTTP minProcessors/maxProcessors [host=%1
port=%2]: %3/%4
Role: infoRole
Category: BW_Plugin
Description: Using the following HTTP minProcessors/maxProcessors [host=%1
port=%2]: %3/%4
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
128
| Chapter 8
HTTP Palette
BW-HTTP-100600: For better MIME Multipart support, consider Upgrading Configuration
Role: warnRole
Category: BW_Plugin
Description: For better MIME Multipart support, consider Upgrading
Configuration
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
| 129
Chapter 9
Java Palette
This chapter describes error codes that can be returned by activities in the Java
palette.
Topics
•
Java Error Codes, page 130
TIBCO ActiveMatrix BusinessWorks Error Codes
130
| Chapter 9
Java Palette
Java Error Codes
BW-JAVA-100000: The activity was not compiled
Role: errorRole
Category: BW_Plugin
Description: The activity was not compiled
Resolution: Compile the activity in Designer.
BW-JAVA-100001: While executing [%1] encountered [%2] : [%3]
Role: errorRole
Category: BW_Plugin
Description: Exception encountered while invoking a method on the activity
Resolution: Inspect the Java source for this activity for a possible cause.
BW-JAVA-100002: The Java compiler is not in the classpath. Add tools.jar to the classpath.
Role: errorRole
Category: BW_Plugin
Description: The Java compiler is not in the classpath. Add tools.jar to the
classpath.
Resolution: Add tools.jar to the classpath.
BW-JAVA-100003: The Java compile of [%1] failed with message: [%2]
Role: errorRole
Category: BW_Plugin
Description: The Java compiler encountered an error in the activity Java code.
Resolution: Examine the error and fix the issue in the Java code.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 131
BW-JAVA-100004: The Java code is missing a required comment: [%1]
Role: errorRole
Category: BW_Plugin
Description: The activity uses embedded comments to auto generate code. One
of them is missing.
Resolution: Update the code to remove any unbalanced comment delimiters and
recompile.
BW-JAVA-100005: The [javaCode] property is missing from the .tra file
Role: errorRole
Category: BW_Plugin
Description: The activity could not determine a suitable temporary directory.
Resolution: add java.property.javaCode=[directory] in the designer.tra and
bwengine.tra files.
BW-JAVA-100006: Cannot delete the [%1] Java source file.
Role: errorRole
Category: BW_Plugin
Description: Source files are written to the local file system for the compiler to
access. The given file already exists and is write protected.
Resolution: Remove the Java source file from the local file system so that the
activity may write a new copy.
BW-JAVA-100007: Cannot write the [%1] Java source file: [%2]
Role: errorRole
Category: BW_Plugin
Description: Source files are written to the local file system for the compiler to
access. There was an error writing the given file to the file system.
Resolution: Examine the temporary directory for sufficient space to write files.
TIBCO ActiveMatrix BusinessWorks Error Codes
132
| Chapter 9
Java Palette
BW-JAVA-100011: Activity input schema creation error. Exception [%1] occurred while trying
to create input schema. %2
Role: errorRole
Category: BW_Plugin
Description: The Java plugin activity is not able create schema for the activity's
input tab. Exception occurred
Resolution: Please correct the error and retry.
BW-JAVA-100012: Activity output schema creation error. Exception [%1] occurred while
trying to create output schema. %2
Role: errorRole
Category: BW_Plugin
Description: The Java plugin activity is not able create schema for the activity's
output tab. Exception occurred
Resolution: Please correct the error and retry.
BW-JAVA-100013: Activity input data conversion error. Exception [%1] occurred while trying
to render the activity input data. %2
Role: errorRole
Category: BW_Plugin
Description: This activity is not able to convert the input data.
Resolution: Please Contact TIBCO Support
BW-JAVA-100014: Activity output data conversion error. Exception [%1] occurred while trying
to create the activity output data. %2
Role: errorRole
Category: BW_Plugin
Description: This activity is not able to create the output data.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 133
BW-JAVA-000015: Activity initialization error: %1
Role: errorRole
Category: BW_Plugin
Description: Error occurred while initializing the activity.
Resolution: Please Contact TIBCO Support
BW-JAVA-100016: Unable to obtain information for the Java class [%1]. Exception [%2]
occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred while trying to obtain information for the
declared Java class.
Resolution: Please correct the error stated in the exception message and retry.
BW-JAVA-100017: The Java class [%1] is not found in the classpath.
ClassNotFoundException occurred. %2
Role: errorRole
Category: BW_Plugin
Description: ClassNotFoundException occurred while trying to access the
specified Java class.
Resolution: Please verify that the specified class file is contained in the classpath.
BW-JAVA-100018: The Java class [%1] cannot be instantiated. Exception [%2] occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Unable to create an instance of the specified Java class.
Resolution: Please correct the error stated in the exception message and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
134
| Chapter 9
Java Palette
BW-JAVA-100019: Input data error. The activity received an incorrect value for the method
parameters. IllegalArgumentException occurred while trying to construct an instance of the
Java class [%1]: %2
Role: errorRole
Category: BW_Plugin
Description: The activity received a incorrect value for the method parameter
element that is in the activity input tab. IllegalArgumentException occurred
while trying to construct the specified Java class.
Resolution: Verify that the correct values are provided for the method parameter
elements that are in the activity input tab.
BW-JAVA-100020: Unable to construct an instance of the Java class [%1]. Exception [%2]
occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Unable to create an instance of the Java class. Exception occurred
while trying to create an instance of the Java class.
Resolution: Please correct the error stated in the exception message and retry.
BW-JAVA-100021: The constructor for the Java class [%1] raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the Java class constructor.
Resolution: The exception was raised by the constructor of the declared Java
class. Please refer to the Java class implementation for details.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 135
BW-JAVA-100022: Configuration error. The Java class [%1] is an abstract class. It is not
permitted to create an instance of an abstract Java class.
Role: errorRole
Category: BW_Plugin
Description: The selected class is an abstract Java class.
Resolution: Make sure that the selected class is not an abstract Java class
BW-JAVA-100023: Configuration error. The Java class [%1] is an interface. It is not permitted
to create an instance of a Java interface.
Role: errorRole
Category: BW_Plugin
Description: The selected class is a Java interface.
Resolution: Make sure that the selected class is not a Java interface
BW-JAVA-100024: Configuration error. The Java class [%1] is not serializable. If the selected
Java class is cached by the activity then the class must be a subtype of the interface
'java.io.Serializable'.
Role: errorRole
Category: BW_Plugin
Description: The declared Java class is not serializable. If the user has selected the
option to cache the declared Java class then the class must be a subtype of the
interface 'java.io.Serializable'.
Resolution: Make sure that the selected class is a subtype of the interface
'java.io.Serializable'
TIBCO ActiveMatrix BusinessWorks Error Codes
136
| Chapter 9
Java Palette
BW-JAVA-100025: Configuration error. The method [%1] returns a Java class [%2] that is not
serializable. The Java class returned by the selected method must be a subtype of the
interface 'java.io.Serializable'.
Role: errorRole
Category: BW_Plugin
Description: Invalid method return type. If the selected method must returns a
Java class then the class must be a subtype of the interface 'java.io.Serializable'.
Resolution: Make sure that the selected method returns a serializable Java class
BW-JAVA-100026: Unable to obtain information for the method [%1] from the class [%2].
NoSuchMethodException occurred. %3
Role: errorRole
Category: BW_Plugin
Description: The method name is not contained in the declared Java class.
Resolution: It is possible that the declared Java class has been modified since the
last configuration of this activity. Please reconfigure this activity or verify that the
declared Java class has not changed since the last configuration.
BW-JAVA-100027: Unable to obtain information for the cleanup method [%1] from the class
[%2]. NoSuchMethodException occurred. %3
Role: errorRole
Category: BW_Plugin
Description: The cleanup method name is not contained in the declared Java
class.
Resolution: It is possible that declared Java class has been modified since the last
configuration of this activity. Please reconfigure this activity or verify that the
declared Java class has not changed since the last configuration.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 137
BW-JAVA-100028: Unable to obtain information for method [%1] from the class [%2].
SecurityException occurred. %3
Role: errorRole
Category: BW_Plugin
Description: SecurityException occurred while trying to get method information
from the declared Java class.
Resolution: Please correct the error and retry.
BW-JAVA-100029: Unable to obtain information for method [%1] from the class [%2].
ClassNotFoundException occurred. %3
Role: errorRole
Category: BW_Plugin
Description: ClassNotFoundException occurred while trying to get method
information from the declared Java class.
Resolution: Please verify that the specified class file is contained in the classpath.
BW-JAVA-100030: Unable to obtain information for method [%1] from the class [%2].
Exception occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred while trying to get method information from the
declared Java class.
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
138
| Chapter 9
Java Palette
BW-JAVA-100031: Input data error. The activity received an incorrect value for the method
parameters. IllegalArgumentException occurred while trying to invoke the method [%1]: %2
Role: errorRole
Category: BW_Plugin
Description: The activity received a incorrect value for the method parameter
element that is in the activity input tab. IllegalArgumentException occurred
while trying to invoke the Java method.
Resolution: Verify that the correct values are provided for the method parameter
elements that are in the activity input tab.
BW-JAVA-100032: Input data error. The activity received an incorrect Java object for the
declared Java class [%1]. The activity expected an instance of the Java class [%2], but
received an instance of the Java class [%3]: %4
Role: errorRole
Category: BW_Plugin
Description: The activity received a incorrect value for the declared class element
that is in the activity input tab.
Resolution: Possible causes for this error are: (1). Incorrect object reference was
specified for the declared Java class. Verify that the correct Java object reference is
provided for the declared Java class element shown in the input tab of this
activity. (2). The classpath refers to a incorrect declared class or the Java jar file.
Verify that the classpath refers to the correct declared class.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 139
BW-JAVA-100033: Input data error. The activity received an incorrect Java object for the
declared Java class [%1]. The Java object received is not compatible with the Java object
expected by this activity. The activity expects an instance of the Java class [%2]: %3
Role: errorRole
Category: BW_Plugin
Description: The activity received a incorrect value for the declared class element
that is in the activity input tab.
Resolution: Possible causes for this error are: (1). Incorrect object reference was
specified for the declared Java class. Verify that the correct Java object reference is
provided for the declared Java class element shown in the input tab of this
activity. (2). The classpath refers to a incorrect declared class or the Java jar file.
Verify that the classpath refers to the correct declared class.
BW-JAVA-100034: Input data error. The activity received 'null' value for the for the declared
Java class. The activity expected an instance of the class [%1], but received a 'null'.
Role: errorRole
Category: BW_Plugin
Description: The activity received a null value for the declared class element that
is in the activity input tab
Resolution: Possible causes for this error are: (1). Incorrect object reference was
specified for the declared Java class. Verify that the correct Java object reference is
provided for the declared Java class element shown in the input tab of this
activity. (2). The preceding activity that provides the input value for this activity
produced a null for its output.
BW-JAVA-100035: Unable to invoke the method [%1]. Exception [%2] occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Unable to invoke the user specified method of the Java class.
Exception occurred while trying to invoke the method.
Resolution: Please correct the error stated in the exception message and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
140
| Chapter 9
Java Palette
BW-JAVA-100036: Unable to invoke the cleanup method [%1]. Exception [%2] occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Unable to invoke the cleanup method for the Java class. Exception
occurred while trying to invoke the method.
Resolution: Please correct the error stated in the exception message and retry.
BW-JAVA-100037: The method [%1] raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the specified method.
Resolution: The exception was raised by the method of the specified Java class.
Please refer to the declared class implementation for details.
BW-JAVA-100038: The cleanup method [%1] raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the cleanup method.
Resolution: The exception was raised by the method of the specified Java class.
Please refer to the declared class implementation for details.
BW-JAVA-100039: Exception occurred while trying to obtain the JavaSchema [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Unable to get the JavaSchema activity referenced by this activity
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 141
BW-JAVA-100040: The JavaSchema [%1] referenced by this activity is not found in repository.
Role: errorRole
Category: BW_Plugin
Description: The repository does not contain the JavaSchema activity referenced
by this activity.
Resolution: Please correct the error and retry.
BW-JAVA-100041: The JavaSchema [%1] referenced by this activity contains invalid field
values.
Role: errorRole
Category: BW_Plugin
Description: The JavaSchema activity referenced by this activity contains invalid
field values.
Resolution: Please correct the error and retry.
BW-JAVA-100042: Input data error. The activity received 'null' value for the declared Java
class. The activity expected instance of class [%1], but received a 'null'.
Role: errorRole
Category: BW_Plugin
Description: The activity received a null value for the declared Java class element
that is in the activity input tab
Resolution: Possible causes for this error are: (1). Incorrect object reference was
specified for the declared class. Verify that the correct Java object reference is
provided for the declared class element shown in the input tab of this activity. (2).
The preceding activity that provides the input value for this activity produced a
null for its output.
TIBCO ActiveMatrix BusinessWorks Error Codes
142
| Chapter 9
Java Palette
BW-JAVA-100043: Input data error. The activity received incorrect Java object for the declared
Java class. The activity expected instance of a class [%1], but received instance of a class
[%2].
Role: errorRole
Category: BW_Plugin
Description: The activity received a incorrect value for the declared Java class
element that is in the activity input tab.
Resolution: Possible causes for this error are: (1). Incorrect object reference was
specified for the declared class. Verify that the correct Java object reference is
provided for the declared class element shown in the input tab of this activity. (2).
The classpath refers to a incorrect the declared class or the Java jar file. Verify that
the classpath refers to the correct declared Java class.
BW-JAVA-100044: Configuration error. The Java class [%1] does not contain a default
constructor or a constructor with no arguments. The selected Java class must have a default
constructor if the user has selected the option to construct the declared class by the activity.
Role: errorRole
Category: BW_Plugin
Description: The user has selected the option to construct the declared class by the
activity. This option is available in the
Resolution: Select a Java class that contain a default constructor
BW-JAVA-100045: Data Conversion error: %1
Role: errorRole
Category: BW_Plugin
Description: Unable to convert data from XML to Java or Java to XML.
Resolution: Certain Java data types are not supported by the BusinessWorks
conversion mechanism. Please verify that unsupported data types are not
utilized or referenced in your Java class.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 143
BW-JAVA-100046: Data Conversion error. Exception occurred while trying to convert Java
object to XML data. %1
Role: errorRole
Category: BW_Plugin
Description: Unable to convert the Java object to an XML data
Resolution: Certain Java data types are not supported by the Java to XML
conversion mechanism. Please verify that unsupported data types are not
utilized or referenced in your Java class.
BW-JAVA-100047: Data Conversion error. Exception occurred while trying to convert XML
data to Java object. %1
Role: errorRole
Category: BW_Plugin
Description: Unable to convert the XML data to Java object
Resolution: Certain Java data types are not supported by the XML to Java
conversion mechanism. Please verify that unsupported data types are not
utilized or referenced in your Java class.
BW-JAVA-100048: Unable to generate schema for the Java class [%1]. Exception [%2]
occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Error occurred while trying to generate schema for the declared Java
class.
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
144
| Chapter 9
Java Palette
BW-JAVA-100049: Configuration error. The Java class [%1] is not serializable. For XML to
Java conversion operations the selected Java class must be a subtype of the interface
'java.io.Serializable'.
Role: errorRole
Category: BW_Plugin
Description: The selected class must be serializable for XML to Java conversion
operation
Resolution: Select a class that is serializable
BW-JAVA-100050: Configuration error. The Java class [%1] does not contain a default
constructor or a constructor with no arguments. For XML to Java conversion operation the
selected Java class must have a default constructor.
Role: errorRole
Category: BW_Plugin
Description: The selected Java class does not contain a constructor with zero
arguments
Resolution: Select a Java class that contain a default constructor
BW-JAVA-100051: Configuration error. The Java class [%1] contains unsupported data type.
%2
Role: errorRole
Category: BW_Plugin
Description: The declared Java class contains unsupported data type.
Resolution: Certain Java data types are not supported by the XML to Java or Java
to XML conversion mechanism. Please verify that unsupported data types are not
utilized or referenced in your Java class.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 145
BW-JAVA-100052: Missing the schema for the Java class [%1].
Role: errorRole
Category: BW_Plugin
Description: A schema could not be located the specified Java class.
Resolution: Please attempt to generate the schema.
BW-JAVA-100053: A schema for the JavaSchema resource [%1] with the namespace [%2]
could not be found.
Role: errorRole
Category: BW_Plugin
Description: A schema could not be located the specified namespace.
Resolution: Please examine the JavaSchema resource and attempt to regenerate
the schema.
BW-JAVA-100054: At runtime the TIBCO BusinessWorks activity will not be able to access the
method [%1] of the class [%2]. The class or the superclass [%3] that implements the method is
not declared as a public class.
Role: errorRole
Category: BW_Plugin
Description: The declared class modifier must be public.
Resolution: Please verfiy that the Java class that implements the selected method
is declared public
TIBCO ActiveMatrix BusinessWorks Error Codes
146
| Chapter 9
Java Palette
BW-JAVA-100055: At runtime the TIBCO BusinessWorks activity will not be able to access the
method [%1] of the class or interface [%2]. The interface [%3] that defines the method is not
declared as a public interface.
Role: errorRole
Category: BW_Plugin
Description: The declared inteface modifier must be public.
Resolution: Please verfiy that the Java Inteface that proclaims the selected
method is declared public
BW-JAVA-100056: Configuration error. The Java class [%1] does not contain a default
constructor or a constructor with no arguments. For XML to Java conversion operations, the
[%2] Java class must be comprised only of classes with default constructors.
Role: errorRole
Category: BW_Plugin
Description: All classes comprising the [%2] Java class must contain a constructor
with zero arguments
Resolution: Select a Java class comprised only of classes with default constructors
BW-JAVA-100057: Configuration error. The Java class [%1] is is not declared as a public
class. It is not permitted to create an instance of an non-public class.
Role: errorRole
Category: BW_Plugin
Description: The declared class modifier must be public.
Resolution: Make sure that the selected Java class is declared as a public class
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 147
BW-JAVA-100058: Exception occurred while trying to obtain the Java Global Instance
resource reference [%1]: %2
Role: errorRole
Category: BW_Plugin
Description: Unable to get the Java Global Instance resource referenced by this
activity
Resolution: Please correct the error and retry.
BW-JAVA-100059: The Java Global Instance resource [%1] referenced by this activity is not
found in the repository.
Role: errorRole
Category: BW_Plugin
Description: The repository does not contain the Java Global Instance resource
referenced by this activity.
Resolution: Please correct the error and retry.
BW-JAVA-100060: The Java Global Instance resource [%1] referenced by this activity contains
invalid field values.
Role: errorRole
Category: BW_Plugin
Description: The Java Global Instance resource referenced by this activity contains
invalid field values.
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
148
| Chapter 9
Java Palette
BW-JAVA-100061: Configuration error. The Java class name specified in this JavaMethod
activity does not match the Java class name specified in the Java Global Instance resource
[%1].
Role: errorRole
Category: BW_Plugin
Description: The Java Global Instance resource referenced by this JavaMethod
activity contains different Java class name then the Java class name specified in
the JavaMethod activity
Resolution: Please reconfigure the JavaMethod activity.
BW-JAVA-100062: Configuration error. The library specified in this JavaMethod activity does
not match the library specified in the Java Global Instance resource [%1].
Role: errorRole
Category: BW_Plugin
Description: The Java Global Instance resource referenced by this JavaMethod
activity contains different library value then the library value specified in the
JavaMethod activity
Resolution: Please reconfigure the JavaMethod activity.
BW-JAVA-100063: Runtime error. Illegal onEvent(Object output)/onError(Throwable error)
method call. OnEvent/OnError method must not be called in the init method or during the
initialization phase.
Role: errorRole
Category: BW_Plugin
Description: The onEvent(Object output) method must never be called in the
init() method. The BW engine is in the middle of initializing the Java Event Source
activity.
Resolution: Please remove the onEvent(Object output) method call in the init
method.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Java Error Codes 149
BW-JAVA-100064: Runtime error. Unable to generate notification events.
Role: errorRole
Category: BW_Plugin
Description: The error occurs when the JavaProcessStarter is unable to generate
notification data due un-availability of a resource.
Resolution: Please check the JavaProcessStarter component for resource errors.
BW-JAVA-100065: Runtime error. The output type defined by the getOutputObjectType() does
not match with the type that is passed in to onEvent(Object object).
Role: errorRole
Category: BW_Plugin
Description: This exception is thrown if the getOutputObjectType() method
defines the type of the output object that is not the same as object type passed to
onEvent(Object object) method in case of "Convert Output Object To XML" flag
being set.
Resolution: Please make sure that object passed to onEvent(Object output)
method is of the same type as that which is returned by getOutputObjectType().
TIBCO ActiveMatrix BusinessWorks Error Codes
150
| Chapter 9
Java Palette
TIBCO ActiveMatrix BusinessWorks Error Codes
| 151
Chapter 10
JDBC Palette
This chapter describes error codes that can be returned by activities in the JDBC
palette.
Topics
•
JDBC Error Codes, page 152
TIBCO ActiveMatrix BusinessWorks Error Codes
152
| Chapter 10
JDBC Palette
JDBC Error Codes
BW-JDBC-100000: Failed to find or create the JDBC driver : %1
Role: errorRole
Category: BW-Plugin
Description: Failed to find or create the JDBC driver
Resolution: Check the CLASSPATH and/or JDBC driver specification
BW-JDBC-100001: Missing SQL statement
Role: errorRole
Category: BW-Plugin
Description: Missing SQL statement
Resolution: Specify the SQL statement
BW-JDBC-100002: Some or all of the prepared parameters do not have data types specified
Role: errorRole
Category: BW-Plugin
Description: Some or all of the prepared parameters do not have data types
specified
Resolution: Make sure all the prepared parameters have data types specified
BW-JDBC-100003: A JDBC driver that supports metadata access is required
Role: errorRole
Category: BW-Plugin
Description: A JDBC driver that supports metadata access is required
Resolution: Use a JDBC driver which allows metadata access
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JDBC Error Codes 153
BW-JDBC-100004: This is not a valid SQL type: %1
Role: errorRole
Category: BW-Plugin
Description: Data type specified is not a valid SQL type
Resolution: Specify a valid SQL data type
BW-JDBC-100005: You must select a JDBC Connection shared configuration resource
Role: errorRole
Category: BW-Plugin
Description: You must select a JDBC Connection shared configuration resource
Resolution: Select a JDBC Connection shared configuration resource
BW-JDBC-100006: Cannot find shared JDBC configuration: %1
Role: errorRole
Category: BW-Plugin
Description: Cannot find shared JDBC configuration
Resolution: Please Contact TIBCO Support
BW-JDBC-100007: Cannot find TIbase.jar in the classpath
Role: errorRole
Category: BW-Plugin
Description: Cannot find TIbase.jar in the classpath
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
154
| Chapter 10
JDBC Palette
BW-JDBC-100008: Improper SQL statement used. %1
Role: errorRole
Category: BW-Plugin
Description: Improper SQL statement used. Details provided
Resolution: Correct and provide proper SQL statement
BW-JDBC-100009: Cannot load JDBC Driver: %1
Role: errorRole
Category: BW-Plugin
Description: Cannot load specified JDBC Driver
Resolution: Please Contact TIBCO Support
BW-JDBC-100010: Duplicate field name found '%1', please modify the query and create unique
aliases for duplicate fields
Role: errorRole
Category: BW-Plugin
Description: Duplicate field name found, please modify the query and create
unique aliases for duplicate fields
Resolution: Modify the query and create unique aliases for duplicate fields
BW-JDBC-100011: At least one parameter must have a value
Role: errorRole
Category: BW-Plugin
Description: At least one parameter must have a value
Resolution: Set a value for any parameter
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JDBC Error Codes 155
BW-JDBC-100012: %1 is not a valid timezone. Please either choose a timezone from the list
provided in the Constants tab or refer to the list of valid timezones in the documentation
Role: errorRole
Category: BW-Plugin
Description: Invalid timezone specified. Please either choose a timezone from the
list provided in the Constants tab or refer to the list of valid timezones in the
documentation
Resolution: Please either choose a timezone from the list provided in the
Constants tab or refer to the list of valid timezones in the documentation
BW-JDBC-100013: JDBC plugin initialization failed: %1
Role: errorRole
Category: BW-Plugin
Description: JDBC plugin initialization failed. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100014: JDBC error reported: (SQLState = %1) - %2
Role: errorRole
Category: BW-Plugin
Description: JDBC error reported. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100015: JDBC plugin evaluation error: %1
Role: errorRole
Category: BW-Plugin
Description: JDBC plugin evaluation error. Details provided
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
156
| Chapter 10
JDBC Palette
BW-JDBC-100016: No JDBC connection available
Role: errorRole
Category: BW-Plugin
Description: No JDBC connection available
Resolution: Please Contact TIBCO Support
BW-JDBC-100017: Failed to create input and/or output schema(s): %1
Role: errorRole
Category: BW-Plugin
Description: Failed to create input and/or output schema(s). Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100018: %1 input parameters declared in the SQL statement but no input
parameters provided
Role: errorRole
Category: BW-Plugin
Description: Some input parameters declared in the SQL statement but no
corresponding input parameters provided
Resolution: Provide input parameters declared in the SQL statement
BW-JDBC-100019: Unexpected number of input parameters. %1 declared in the SQL statement
but %2 input parameters provided
Role: errorRole
Category: BW-Plugin
Description: Number of input parameters declared in the SQL statement does not
match number of input parameters provided
Resolution: Make sure the number of input parameters declared in the SQL
statement match number of input parameters provided
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JDBC Error Codes 157
BW-JDBC-100020: Unexpected input parameters. No input parameter declared in the SQL
statement but %1 input parameters provided
Role: errorRole
Category: BW-Plugin
Description: There is no input parameter declared in the SQL statement but some
input parameters provided
Resolution: Remove all the input parameter provided
BW-JDBC-100021: JDBC plugin configuration error: %1
Role: errorRole
Category: BW-Plugin
Description: JDBC plugin configuration error. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100022: Global variable %1 not defined
Role: errorRole
Category: BW-Plugin
Description: Specified global variable not defined
Resolution: Define such global variable
BW-JDBC-100023: JDBC activity timed out
Role: errorRole
Category: BW-Plugin
Description: JDBC activity timed out
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
158
| Chapter 10
JDBC Palette
BW-JDBC-100024: Invalid procedure name specified. %1
Role: errorRole
Category: BW-Plugin
Description: Invalid procedure name specified. Details provided
Resolution: Provide a valid stored procedure name
BW-JDBC-100025: Unable to obfuscate password. %1
Role: errorRole
Category: BW-Plugin
Description: Unable to obfuscate password. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100026: Unable to deobfuscate password. %1
Role: errorRole
Category: BW-Plugin
Description: Unable to deobfuscate password. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100027: %1 is not a valid SQL statement. It does not generate any output schema.
Please press 'Fetch' button to (re)fetch output schema or correct the SQL statement
Role: errorRole
Category: BW-Plugin
Description: Invalid SQL statement specified. It does not generate any output
schema. Please press 'Fetch' button to (re)fetch output schema or correct the SQL
statement
Resolution: Please press 'Fetch' button to (re)fetch output schema or correct the
SQL statement
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JDBC Error Codes 159
BW-JDBC-100028: Invalid procedure name specified. It can not be null
Role: errorRole
Category: BW-Plugin
Description: Invalid procedure name specified. It can not be null
Resolution: Provide a valid stored procedure name
BW-JDBC-100029: The JNDI Configuration reference [%1] not found
Role: errorRole
Category: BW-Plugin
Description: The JNDI Configuration reference specified not found
Resolution: Provide a valid JNDI Configuration reference
BW-JDBC-100030: The JNDI Configuration reference [%1] not found in repository
Role: errorRole
Category: BW-Plugin
Description: The JNDI Configuration reference specified not found in repository
Resolution: Provide a valid JNDI Configuration reference
BW-JDBC-100031: The JNDI Configuration reference [%1] contains incorrect field values
Role: errorRole
Category: BW-Plugin
Description: The JNDI Configuration reference specified contains incorrect field
values
Resolution: Check and correct specified JNDI Configuration reference
TIBCO ActiveMatrix BusinessWorks Error Codes
160
| Chapter 10
JDBC Palette
BW-JDBC-100032: Exception occurred while trying to obtain the JNDI Configuration reference
[%1]: %2
Role: errorRole
Category: BW-Plugin
Description: Exception occurred while trying to obtain the JNDI Configuration
reference. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100033: Configuration Test Failed. %1
Role: errorRole
Category: BW-Plugin
Description: Configuration Test Failed. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100034: Configuration Test Failed. Exception [%1] occurred.
Role: errorRole
Category: BW-Plugin
Description: Configuration Test Failed. Exception occurred. Details provided
Resolution: Please Contact TIBCO Support
BW-JDBC-100035: Invalid object looked up, must be either DataSource or XADataSource: %1
Role: errorRole
Category: BW-Plugin
Description: Invalid object looked up, must be either DataSource or
XADataSource. JNDI lookup name provided
Resolution: Make sure JNDI lookup name bound to either DataSource or
XADataSource object
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JDBC Error Codes 161
BW-JDBC-100036: JNDI look up failed, object is null: %1
Role: errorRole
Category: BW-Plugin
Description: JNDI look up failed, object is null. JNDI lookup name provided
Resolution: Make sure JNDI look up returns not null object
BW-JDBC-100037: Batch updates failed on update number: %1
Role: errorRole
Category: BW-Plugin
Description: Batch updates failed on provided update numbers
Resolution: Resolve these individual updates
BW-JDBC-100038: Can't participlate in this transaction group. Correct JDBC Connection type
or enable [Override Transaction Behavior]
Role: errorRole
Category: BW-Plugin
Description: Can't participlate in this transaction group. Correct JDBC Connection
type or enable [Override Transaction Behavior]
Resolution: Correct JDBC Connection type or enable [Override Transaction
Behavior]
BW-JDBC-100039: JDBC Connection Login timed out
Role: errorRole
Category: BW-Plugin
Description: JDBC Connection Login timed out
Resolution: Increase login timeout
TIBCO ActiveMatrix BusinessWorks Error Codes
162
| Chapter 10
JDBC Palette
BW-JDBC-100040: Invalid timeout value [%1]. The value must be an integer greater than or
equal to '0'
Role: errorRole
Category: BW-Plugin
Description: Invalid timeout value specified. The value must be an integer greater
than or equal to '0'
Resolution: Set timeout to an integer greater than or equal to '0'
TIBCO ActiveMatrix BusinessWorks Error Codes
| 163
Chapter 11
JMS Palette
This chapter describes error codes that can be returned by activities in the JMS
palette.
Topics
•
JMS Error Codes, page 164
TIBCO ActiveMatrix BusinessWorks Error Codes
164
| Chapter 11
JMS Palette
JMS Error Codes
BW-JMS-100000: Invalid configuration data: JMS connection reference is not specified.
Role: errorRole
Category: BW-Plugin
Description: JMS connection reference is not specified in configuration data.
Resolution: Specify a valid JMS connection reference in activity configuration.
BW-JMS-100002: Invalid configuration data: specfied connection reference not found in
repository.[%1]
Role: errorRole
Category: BW-Plugin
Description: The specified JMS connection reference is not found in repository.
[%1-connection reference].
Resolution: Make sure that the connection reference specified in activity
configuration refers to a valid shared JMS connection.
BW-JMS-100003: Invalid configuration data: JNDI context URL is not specified.[%1]
Role: errorRole
Category: BW-Plugin
Description: JNDI context URL is not specified in the shared JMS connection.
[%1-shared connection data].
Resolution: Specify a valid JNDI context URL in the specified shared JMS
connection.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 165
BW-JMS-100004: Invalid configuration data: JNDI initial context factory is not specified.[%1]
Role: errorRole
Category: BW-Plugin
Description: JNDI initial context factory is not specified in the shared JMS
connection. [%1-shared connection data].
Resolution: Specify a valid JNDI initial context factory in the specified shared
JMS connection.
BW-JMS-100005: Could not create connection with JMS server.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a connection with JMS
server[%1-connection key data].
Resolution: Look at the exception for more information.
BW-JMS-100006: Could not create a session to receive messages.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a session to receive
messages [%1-configuration data].
Resolution: Look at the exception for more information.
BW-JMS-100007: Could not create a reply session/producer.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a reply producer
[%1-configuration data].
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
166
| Chapter 11
JMS Palette
BW-JMS-100008: JNDI lookup of queue name [%1] failed.
Role: errorRole
Category: BW-Plugin
Description: JNDI lookup of queue name [%1] failed.
Resolution: Look at the exception for more information. Make sure that the queue
has been setup in your JMS provider
BW-JMS-100009: Cannot retrieve queue with name [%1].
Role: errorRole
Category: BW-Plugin
Description: Cannot retrieve queue with name [%1].
Resolution: Make sure that the queue has been setup in your JMS provider.
BW-JMS-100010: Error creating JNDI initial context [%1].
Role: errorRole
Category: BW-Plugin
Description: Cannot create JNDI initial context [%1 - connection key data].
Resolution: Look at the exception for more information.
BW-JMS-100011: JNDI lookup of topic name [%1] failed.
Role: errorRole
Category: BW-Plugin
Description: JNDI lookup of topic name [%1] failed.
Resolution: Look at the exception for more information. Make sure that the topic
has been setup in your JMS provider
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 167
BW-JMS-100012: Cannot retrieve topic with name [%1].
Role: errorRole
Category: BW-Plugin
Description: Cannot retrieve topic with name [%1].
Resolution: Make sure that the topic has been setup in your JMS provider.
BW-JMS-100013: Error creating dynamic queue with name [%1].
Role: errorRole
Category: BW-Plugin
Description: Error creating dynamic queue with name [%1].
Resolution: Look at the exception for more information. Also refer to your JMS
provider documentation.
BW-JMS-100014: Error creating dynamic topic with name [%1].
Role: errorRole
Category: BW-Plugin
Description: Error creating dynamic topic with name [%1].
Resolution: Look at the exception for more information. Also refer to your JMS
provider documentation.
BW-JMS-100015: Could not create queue message receiver.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a queue receiver
[%1-configuration data].
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
168
| Chapter 11
JMS Palette
BW-JMS-100016: Could not create queue message receiver.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a queue receiver
[%1-Destination].
Resolution: Look at the exception for more information.
BW-JMS-100017: Could not create durable topic message subsriber.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a durable topic
message subsriber.[%1-configuration data].
Resolution: Look at the exception for more information.
BW-JMS-100018: Could not create topic message subsriber.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a topic message
subsriber.[%1-configuration data].
Resolution: Look at the exception for more information.
BW-JMS-100019: Could not create topic message subsriber.[%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a topic message
subsriber.[%1-Destination].
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 169
BW-JMS-100020: There was an error when attempting to receive a message.
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to receive a message.
Resolution: Look at the exception for more information.
BW-JMS-100021: There was an error in onMessage callback for a received message of type
[%1].
Role: errorRole
Category: BW-Plugin
Description: There was an error in onMessage callback for a received message of
type [%1].
Resolution: Look at the exception for more information.
BW-JMS-100022: Received a message of type [%1] but configured to receive messages of type
[%2].
Role: errorRole
Category: BW-Plugin
Description: The message type of received message does not match the
configured message type.
Resolution: Make sure that the JMS message type is configured correctly in the
activity configuration.
BW-JMS-100023: There was an error while parsing the reply message.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing the reply message.
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
170
| Chapter 11
JMS Palette
BW-JMS-100024: There was an error when attempting to confirm a message.
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to confirm a message.
Resolution: Look at the exception for more information.
BW-JMS-100026: JMS message type [%1] is not valid.
Role: errorRole
Category: BW-Plugin
Description: JMS message type [%1] is not valid.
Resolution: Internal error.
BW-JMS-100027: Error creating temporary queue for reply.
Role: errorRole
Category: BW-Plugin
Description: Error creating temporary queue topic for reply.
Resolution: Look at the exception for more information.
BW-JMS-100028: Error creating temporary topic for reply.
Role: errorRole
Category: BW-Plugin
Description: Error creating temporary topic for reply.
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 171
BW-JMS-100029: Could not create a reply receiver.[Destination=%1]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a reply
receiver.[Destination=%1].
Resolution: Look at the exception for more information.
BW-JMS-100030: There was an error when attempting to send a request message.
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to send a request message.
Resolution: Look at the exception for more information.
BW-JMS-100031: There was an unexpected error.
Role: errorRole
Category: BW-Plugin
Description: There was an unexpected error.
Resolution: Look at the exception for more information.
BW-JMS-100032: There was an unexpected error.
Role: errorRole
Category: BW-Plugin
Description: There was an unexpected error.
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
172
| Chapter 11
JMS Palette
BW-JMS-100033: Unkown state in request/reply processing [%1].
Role: errorRole
Category: BW-Plugin
Description: There was an unexpected error [%1-closure].
Resolution: Look at the exception for more information.
BW-JMS-100034: There was an error while cancelling.
Role: errorRole
Category: BW-Plugin
Description: There was an error while cancelling.
Resolution: Look at the exception for more information.
BW-JMS-100035: Received a null reply message.
Role: errorRole
Category: BW-Plugin
Description: Received a null reply message.
Resolution: Look at the exception for more information.
BW-JMS-100036: Could not create a session to send request messages.[ConnectionKey=%1,
Transacted=%2, AckMode=%3]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a session to send
request messages [ConnectionKey=%1, Transacted=%2, AckMode=%3].
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 173
BW-JMS-100037: Could not create a session to receive reply messages.[ConnectionKey=%1,
Transacted=%2, AckMode=%3]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a session to send reply
messages [ConnectionKey=%1, Transacted=%2, AckMode=%3].
Resolution: Look at the exception for more information.
BW-JMS-100038: Could not create a session to send messages.[ConnectionKey=%1,
Transacted=%2, AckMode=%3]
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to create a session to send
messages [ConnectionKey=%1, Transacted=%2, AckMode=%3].
Resolution: Look at the exception for more information.
BW-JMS-100039: There was an unexpected error while sending a message.
Role: errorRole
Category: BW-Plugin
Description: There was an unexpected error while sending a message.
Resolution: Look at the exception for more information.
BW-JMS-100040: There was an unexpected error while sending a reply.
Role: errorRole
Category: BW-Plugin
Description: There was an unexpected error while sending a reply.
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
174
| Chapter 11
JMS Palette
BW-JMS-100041: There was an internal error when attempting setReady.
Role: errorRole
Category: BW-Plugin
Description: There was an internal error when attempting setReady.
Resolution: Look at the exception for more information.
BW-JMS-100042: There was an error while sending a message.
Role: errorRole
Category: BW-Plugin
Description: There was an error while sending a message.
Resolution: Look at the exception for more information.
BW-JMS-100043: There was an error while parsing a message.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing a message.
Resolution: Look at the exception for more information.
BW-JMS-100044: There was an error while parsing the JMS schema.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing the JMS schema.
Resolution: This is an internal error.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 175
BW-JMS-100045: There was an error while parsing the JMS schema.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing the JMS schema.
Resolution: This is an internal error.
BW-JMS-100046: There was an error while parsing the JMS schema.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing the JMS schema.
Resolution: This is an internal error.
BW-JMS-100047: There was an error while parsing data to build a message: attributes are not
allowed.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing data to build a messag: attributes
are not allowed.
Resolution: This is an internal error.
BW-JMS-100048: There was an error while parsing data to build a message: mixed text not
allowed.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing data to build a messag: mixed text
not allowed.
Resolution: This is an internal error.
TIBCO ActiveMatrix BusinessWorks Error Codes
176
| Chapter 11
JMS Palette
BW-JMS-100049: JMS message priority [%1] in input bind is not valid.
Role: errorRole
Category: BW-Plugin
Description: JMS message priority [%1] in input bind is not valid.
Resolution: A valid JMS message priority must be a number between 0 and 9
(inclusive).
BW-JMS-100050: Invalid JMS Application Properties [%1].
Role: errorRole
Category: BW-Plugin
Description: JMS application properties are not valid. See [%1-exception] for more
details.
Resolution: Verify that JMS application properties are correct. This can be done
by using 'validate for deployment' feature of the Designer.
BW-JMS-100051: Invalid message body schema specified [%1] [%2].
Role: errorRole
Category: BW-Plugin
Description: The schema [%1] to define message body is not valid. See
[%2-exception] for more details.
Resolution: Check the message body schema specified.
BW-JMS-100052: Invalid JMS message type specified [%1].
Role: errorRole
Category: BW-Plugin
Description: The JMS message type [%1] is not valid.
Resolution: Pick a valid JMS message type.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 177
BW-JMS-100053: An internal error occured while processing configuration data [%1].
Role: errorRole
Category: BW-Plugin
Description: An internal error occured while processing configuration data. See
[%1-exception] for more details.
Resolution: Check the exception for more details.
BW-JMS-100054: Invalid input data.
Role: errorRole
Category: BW-Plugin
Description: Input data is invalid. See the exception for more details.
Resolution: Check activity input data.
BW-JMS-100055: Error creating JMS message.
Role: errorRole
Category: BW-Plugin
Description: There was an error while creating a JMS message. See the exception
for more details.
Resolution: Check activity input data. See the exception for more details.
BW-JMS-100056: Invalid configuration data: message body schema is not specified.
Role: errorRole
Category: BW-Plugin
Description: Invalid configuration data: no schema specified for message body.
Resolution: Specify a schema to represent the message body in the 'Input Editor'
or 'Output Editor' tab.
TIBCO ActiveMatrix BusinessWorks Error Codes
178
| Chapter 11
JMS Palette
BW-JMS-100057: Invalid configuration data: destination %1 name is not specified.
Role: errorRole
Category: BW-Plugin
Description: Invalid configuration data: destination name is not specified.
Resolution: Specify name of the topic/queue destination in 'Configuration' tab.
BW-JMS-100058: Invalid configuration data: reply to is not specified.
Role: errorRole
Category: BW-Plugin
Description: Invalid configuration data: reply to is not specified.
Resolution: Pick the reply target in 'Configuration' tab.
BW-JMS-100059: Cannot create connection factory in a provider-specific way.
Role: errorRole
Category: BW-Plugin
Description: Cannot create connection factory in a provider-specific way. Use
JNDI lookup instead.
Resolution: Please use TIBCO Enterprise for JMS. Otherwise use JNDI to lookup
connection factory.
BW-JMS-100060: Invalid configuration data: message body schema is not specified in 'Input
Editor' tab.
Role: errorRole
Category: BW-Plugin
Description: Invalid configuration data: no schema specified for the request
message body in 'Input Editor' tab.
Resolution: Specify a schema to represent the request message body in the 'Input
Editor' tab.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
JMS Error Codes 179
BW-JMS-100061: Invalid configuration data: message body schema is not specified in 'Output
Editor' tab.
Role: errorRole
Category: BW-Plugin
Description: Invalid configuration data: no schema specified for the reply
message body in 'Output Editor' tab.
Resolution: Specify a schema to represent the reply message body in the 'Output
Editor' tab.
BW-JMS-100062: Invalid message body schema specified in 'Input Editor' tab [%1] [%2].
Role: errorRole
Category: BW-Plugin
Description: The schema [%1] to define the request message body in 'Input Editor'
tab is not valid. See [%2-exception] for more details.
Resolution: Check the request message body schema specified in 'Input Editor'
tab.
BW-JMS-100063: Invalid message body schema specified in 'Output Editor' tab [%1] [%2].
Role: errorRole
Category: BW-Plugin
Description: The schema [%1] to define the reply message body in 'Output Editor'
tab is not valid. See [%2-exception] for more details.
Resolution: Check the reply message body schema specified in 'Output Editor'
tab.
TIBCO ActiveMatrix BusinessWorks Error Codes
180
| Chapter 11
JMS Palette
BW-JMS-100064: Could not decrypt password.[%1].
Role: errorRole
Category: BW-Plugin
Description: There was an error while decrypting a password. See [%1-exception]
for more details.
Resolution: Make sure that the password stored in the repository is not in clear
text.
BW-JMS-100065: Can't create XAResource.Check if the ConnectionFactory [%1] is XA
enabled.
Role: errorRole
Category: BW-Plugin
Description: Can't create XAResource.Check if the ConnectionFactory [%1] is XA
enabled.
Resolution: Check if the ConnectionFactory [%1] is XA enabled.
BW-JMS-100066: JNDI lookup failed for queue with name [%1].
Role: errorRole
Category: BW-Plugin
Description: JNDI lookup failed for queue with name [%1].
Resolution: Look at the exception for more information. Also refer to your JMS
provider documentation.
TIBCO ActiveMatrix BusinessWorks Error Codes
| 181
Chapter 12
Mail Palette
This chapter describes error codes that can be returned by activities in the Mail
palette.
Topics
•
Mail Error Codes, page 182
TIBCO ActiveMatrix BusinessWorks Error Codes
182
| Chapter 12
Mail Palette
Mail Error Codes
BW-MAIL-100001: Invalid input data: mail server host not specified
Role: errorRole
Category: BW-Plugin
Description: Host name of mail server is not specified.
Resolution: Specify a valid mail server host in configuration.
BW-MAIL-100002: Invalid input data: username not specified.
Role: errorRole
Category: BW-Plugin
Description: Username for mail server account is not specified
Resolution: Specify a valid user name in configuration.
BW-MAIL-100003: Invalid input data: password not specified.
Role: errorRole
Category: BW-Plugin
Description: Password for mail server account is not specified.
Resolution: Specify a valid password in configuration.
BW-MAIL-100004: Invalid input data: Null input data.
Role: errorRole
Category: BW-Plugin
Description: Input data is null.
Resolution: Check activity input data.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Mail Error Codes 183
BW-MAIL-100005: Invalid input data: Error parsing input data.
Role: errorRole
Category: BW-Plugin
Description: Input data is invalid.
Resolution: Check activity input data.
BW-MAIL-100006: Invalid input data: Unequal number of attachment names and attachment
data.
Role: errorRole
Category: BW-Plugin
Description: Number of attachment names and attachment data specified in the
input are unequal.
Resolution: Check attachment input data.
BW-MAIL-100007: Invalid input data: Both the comma and semicolon cannot be used at same
time to separate addresses.
Role: errorRole
Category: BW-Plugin
Description: Both the comma and semicolon cannot be used at same time to
separate addresses.
Resolution: Use either comma or semicolon for separating addresses.
BW-MAIL-100008: Mail provider for protocol [%1] not found. Make sure that the provider jar is
in java classpath.
Role: errorRole
Category: BW-Plugin
Description: Could not initialize the mail provider for specified protocol: [mail
protocol].
Resolution: Make sure that the mail provider jar file is in java classpath.
TIBCO ActiveMatrix BusinessWorks Error Codes
184
| Chapter 12
Mail Palette
BW-MAIL-100009: Error connecting to the mail server using connection parameters: [%1].
Role: errorRole
Category: BW-Plugin
Description: Could not establish connection to the mail server using sepecifed
parameters: [parameters].
Resolution: Check configuration data.
BW-MAIL-100010: The default mail folder was not found on mail server.
Role: errorRole
Category: BW-Plugin
Description: The default mail folder was not found on mail server.
Resolution: Check mail server setup.
BW-MAIL-100011: The INBOX mail folder was not found on mail server.
Role: errorRole
Category: BW-Plugin
Description: The INBOX mail folder was not found on mail server.
Resolution: Check mail server setup.
BW-MAIL-100012: Error getting folder on mail server.
Role: errorRole
Category: BW-Plugin
Description: Error getting folder on mail server.
Resolution: Check mail server setup.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Mail Error Codes 185
BW-MAIL-100013: Error closing mail server connection.
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting close connection with mail
server.
Resolution: Look at the exception for more information.
BW-MAIL-100014: Error while polling mail server: cannot open INBOX folder.
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to open connection with mail
server.
Resolution: Look at the exception for more information.
BW-MAIL-100015: Error while polling mail server: cannot close INBOX folder.
Role: errorRole
Category: BW-Plugin
Description: There was an error when attempting to close connection with mail
server.
Resolution: Look at the exception for more information.
BW-MAIL-100016: Unexpected error while polling mail server.
Role: errorRole
Category: BW-Plugin
Description: There was an unexpected error while retrieving mails.
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
186
| Chapter 12
Mail Palette
BW-MAIL-100017: Error parsing received mail.
Role: errorRole
Category: BW-Plugin
Description: There was an error while parsing a new mail message received.
Resolution: Look at the exception for more information.
BW-MAIL-100018: Error building mail message.
Role: errorRole
Category: BW-Plugin
Description: There was an error while building a mail message to send.
Resolution: Look at the exception for more information.
BW-MAIL-100019: Error sending mail message.
Role: errorRole
Category: BW-Plugin
Description: Error sending mail message. Cause: %1
Resolution: Look at the exception for more information.
BW-MAIL-100020: Error connecting to the mail server - unknown host; connection parameters:
[%1].
Role: errorRole
Category: BW-Plugin
Description: Could not establish connection to the mail server - specified host is
unknown: [%1 - connection parameters].
Resolution: Specify a valid mail server host in configuration or check your
network connections and setup.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Mail Error Codes 187
BW-MAIL-100021: Error connecting to the mail server - connect exception; connection
parameters: [%1].
Role: errorRole
Category: BW-Plugin
Description: Could not establish connection to the mail server - connect
exception: [%1 - connection parameters].
Resolution: Verify that your mail server is running or check your network
connections.
BW-MAIL-100022: An internal error occured while processing configuration data [%1].
Role: errorRole
Category: BW-Plugin
Description: An internal error occured while processing configuration data. See
[%1-exception] for more details.
Resolution: Check the exception for more details.
BW-MAIL-100023: Invalid polling interval [%1] [%2].
Role: errorRole
Category: BW-Plugin
Description: Specified polling interval [%1] is not valid. See [%2-exception] for
more details.
Resolution: Specify a valid polling interval.
BW-MAIL-100024: Could not resolve mail server host name [%1].
Role: errorRole
Category: BW-Plugin
Description: The specified host name of mail server [%1] cannot be resolved.
Resolution: Use a valid mail server host name. If the host name is valid, make
sure the network naming (DNS) is properly setup.
TIBCO ActiveMatrix BusinessWorks Error Codes
188
| Chapter 12
Mail Palette
BW-MAIL-100025: Could not decrypt password [%1].
Role: errorRole
Category: BW-Plugin
Description: There was an error while decrypting a password. See [%1-exception]
for more details.
Resolution: Make sure that the password stored in the repository is not in clear
text.
BW-MAIL-100026: Could not connect to mail server - invalid username in field [%1] and/or
invalid password in field [%2].
Role: errorRole
Category: BW-Plugin
Description: Got authentication error while connecting to mail server.
Resolution: Make sure that the username and password are correct.
BW-MAIL-100027: %1 Start time = %2 End time= %3 Processing time= %4
Role: infoRole
Category: BW-Plugin
Description: %1 Start time = %2 End time= %3 Processing time= %4
Resolution: none
BW-MAIL-100028: %1 Processing times: %2
Role: infoRole
Category: BW-Plugin
Description: %1 Processing times: %2
Resolution: none
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Mail Error Codes 189
BW-MAIL-100029: Using POP3 Provider from %1
Role: infoRole
Category: BW-Plugin
Description: Using POP3 Provider from %1
Resolution: none
BW-MAIL-100030: Username can not be null when Authentication is on
Role: errorRole
Category: BW-Plugin
Description: Username can not be null when Authentication is on
Resolution: Make sure that the username and password are correct.
BW-MAIL-100031: Password can not be null when Authentication is on
Role: errorRole
Category: BW-Plugin
Description: Password can not be null when Authentication is on
Resolution: Make sure that the username and password are correct.
BW-MAIL-100032: Mail is already deleted, Receive Mail activity has 'Delete Mail' turned on
Role: errorRole
Category: BW-Plugin
Description: Mail is already deleted, Receive Mail activity has 'Delete Mail'
turned on
Resolution: Either turn off 'Delete Mail' in Mail Receiver or do not use Confirm
activity
TIBCO ActiveMatrix BusinessWorks Error Codes
190
| Chapter 12
Mail Palette
BW-MAIL-100033: Error building mail message. Cause: %1
Role: errorRole
Category: BW-Plugin
Description: There was an error while building a mail message to send.
Resolution: Look at the exception for more information.
TIBCO ActiveMatrix BusinessWorks Error Codes
| 191
Chapter 13
Manual Work Palette
This chapter describes error codes that can be returned by activities in the Manual
Work palette.
Topics
•
Manual Work Error Codes, page 192
TIBCO ActiveMatrix BusinessWorks Error Codes
192
| Chapter 13
Manual Work Palette
Manual Work Error Codes
BW-Inconcert-100000: Server Connection Reference not set.
Role: errorRole
Category: BW-Plugin
Description: Server Connection Reference not set.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100001: Cannot find shared connection resource: %1.
Role: errorRole
Category: BW-Plugin
Description: Cannot find shared connection resource: %1.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100002: Work details reference not set.
Role: errorRole
Category: BW-Plugin
Description: Work details reference not set.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100003: Fail to get event manager.
Role: errorRole
Category: BW-Plugin
Description: Fail to get event manager.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Manual Work Error Codes 193
BW-Inconcert-100004: Work ID need to be set. Check your input tab to make sure that work ID
binded is valid
Role: errorRole
Category: BW-Plugin
Description: Work ID need to be set. Check your input tab to make sure that work
ID binded is valid
Resolution: Please Contact TIBCO Support
BW-Inconcert-100005: The inconcert user pool selected is empty.
Role: errorRole
Category: BW-Plugin
Description: The inconcert user pool selected is empty.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100006: Cannot connect to IC Server.
Role: errorRole
Category: BW-Plugin
Description: Cannot connect to IC Server.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100007: Exception caught in assign task activity. Exception Message: %1
Role: errorRole
Category: BW-Plugin
Description: Exception caught in assign task activity.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
194
| Chapter 13
Manual Work Palette
BW-Inconcert-100008: Cannot find work details reference: %1.
Role: errorRole
Category: BW-Plugin
Description: Cannot find work details reference: %1.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100009: The server %1 is not configured correctly. Run the batch registry script
"mkpcattr.btg" before proceeding.
Role: errorRole
Category: BW-Plugin
Description: The server %1 is not configured correctly. Run the batch registry
script "mkpcattr.btg" before proceeding.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100010: Failed to locate the ICPLUGIN server %1.
Role: errorRole
Category: BW-Plugin
Description: Failed to locate the ICPLUGIN server %1
Resolution: Please Contact TIBCO Support
BW-Inconcert-100011: JNI libraries required to interact with Ic Server are missing.
Role: errorRole
Category: BW-Plugin
Description: JNI libraries required to interact with Ic Server are missing.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Manual Work Error Codes 195
BW-Inconcert-100012: Cannot generate workflow server list.
Role: errorRole
Category: BW-Plugin
Description: Cannot generate workflow server list.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100013: Timed out waiting for response.
Role: errorRole
Category: BW-Plugin
Description: Timed out waiting for response.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100014: Error in EventManager: %1.
Role: errorRole
Category: BW-Plugin
Description: Error in EventManager: %1.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100015: Encountered %1 for field %2 when expecting %3.
Role: errorRole
Category: BW-Plugin
Description: Encountered %1 for field %2 when expecting %3.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
196
| Chapter 13
Manual Work Palette
BW-Inconcert-100016: Work Resource cannot be found %1.
Role: errorRole
Category: BW-Plugin
Description: Work Resource cannot be found %1.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100017: Field %1 is already defined in parent schema %2.
Role: errorRole
Category: BW-Plugin
Description: Field %1 is already defined in parent schema %2.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100018: Test Workflow connection
Role: infoRole
Category: connection
Description: Test Workflow connection
Resolution: Please Contact TIBCO Support
BW-Inconcert-100019: Connected to Workflow Server %1.
Role: infoRole
Category: connection
Description: Connected to Workflow Server %1.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Manual Work Error Codes 197
BW-Inconcert-100020: The "Extended Details" does not support "Document" fields. All the
"Document" fields are ignored.
Role: infoRole
Category: connection
Description: The "Extended Details" does not support "Document" fields. All the
"Document" fields are ignored.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100021: Failed to connect to Workflow Server "%1".
Role: errorRole
Category: BW-Plugin
Description: Failed to connect to Workflow Server "%1".
Resolution: Please Contact TIBCO Support
BW-Inconcert-100022: Error while handling response timeout
Role: errorRole
Category: BW-Plugin
Description: Error while handling response timeout
Resolution: Please Contact TIBCO Support
BW-Inconcert-100023: Exception caught in query docuement activity. Exception message: %1
Role: errorRole
Category: BW-Plugin
Description: Exception caught in query document activity.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
198
| Chapter 13
Manual Work Palette
BW-Inconcert-100024: Exception caught in work status activity. Exception message: %1
Role: errorRole
Category: BW-Plugin
Description: Exception caught in work status activity.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100025: Exception caught in work action activity. Exception message: %1
Role: errorRole
Category: BW-Plugin
Description: Exception caught in work action activity.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100026: Error caught in wait work activity. Exception message: %1
Role: errorRole
Category: BW-Plugin
Description: Exception caught in wait work activity.
Resolution: Please Contact TIBCO Support
BW-Inconcert-100027: Reserved word cannot be used in schema:%1
Role: errorRole
Category: BW-Plugin
Description: Reserved word cannot be used in schema:%1
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Manual Work Error Codes 199
BW-Inconcert-100028: Schema Validation Error
Role: errorRole
Category: BW-Plugin
Description: Schema Validation Error
Resolution: Please Contact TIBCO Support
BW-Inconcert-100029: Work Name need to be set. Check your input tab to make sure that work
Name binded is valid
Role: errorRole
Category: BW-Plugin
Description: Work Name need to be set. Check your input tab to make sure that
work Name binded is valid
Resolution: Please Contact TIBCO Support
BW-Inconcert-100030: Assign Pool is not set.
Role: errorRole
Category: BW-Plugin
Description: Assign Pool is not set.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
200
| Chapter 13
Manual Work Palette
TIBCO ActiveMatrix BusinessWorks Error Codes
| 201
Chapter 14
Parse Palette
This chapter describes error codes that can be returned by activities in the Parse
palette.
Topics
•
Parse Error Codes, page 202
TIBCO ActiveMatrix BusinessWorks Error Codes
202
| Chapter 14
Parse Palette
Parse Error Codes
BW-PARSE-100000: Cannot find data format schema resource: %1.
Role: errorRole
Category: BW-Plugin
Description: Cannot find data format schema resource: %1.
Resolution: Please Contact TIBCO Support
BW-PARSE-100001: Cannot create schema from data format schema.
Role: errorRole
Category: BW-Plugin
Description: Cannot create schema from data format schema.
Resolution: Please Contact TIBCO Support
BW-PARSE-100002: Exception in parse eval: %1.
Role: errorRole
Category: BW-Plugin
Description: Exception in parse eval: %1.
Resolution: Please Contact TIBCO Support
BW-PARSE-100003: Line length needs to be
Role: errorRole
Category: BW-Plugin
Description: Line length needs to be
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Parse Error Codes 203
BW-PARSE-100004: Hit EOF on row %1 field %2 spanning columns %3 to %4 .... last row
contents was: '%5'
Role: errorRole
Category: BW-Plugin
Description: Hit EOF on row %1 field %2 spanning columns %3 to %4 .... last row
contents was: '%5'
Resolution: Please Contact TIBCO Support
BW-PARSE-100005: Input type is not specified.
Role: errorRole
Category: BW-Plugin
Description: Input type is not specified.
Resolution: Please Contact TIBCO Support
BW-PARSE-100006: Please specify the Input type field.
Role: errorRole
Category: BW-Plugin
Description: Please specified the Input type field.
Resolution: Please Contact TIBCO Support
BW-PARSE-100007: Data format resource not specified.
Role: errorRole
Category: BW-Plugin
Description: Data format resource not specified.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
204
| Chapter 14
Parse Palette
BW-PARSE-100008: Please specify the data format resource.
Role: errorRole
Category: BW-Plugin
Description: Please specified the data format resource.
Resolution: Please Contact TIBCO Support
BW-PARSE-100009: File %1 cannot be opened using encoding method %2
Role: errorRole
Category: BW-Plugin
Description: File %1 cannot be opened using encoding method %2
Resolution: Please Contact TIBCO Support
BW-PARSE-100010: %1 must be specified if %2 is selected.
Role: errorRole
Category: BW-Plugin
Description: %1 must be specified if %2 is selected.
Resolution: Please Contact TIBCO Support
BW-PARSE-100011: Format Type must be selected.
Role: errorRole
Category: BW-Plugin
Description: Format Type must be selected.
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Parse Error Codes 205
BW-PARSE-100012: Line is too long. Specified Line Delimiter may not match file content.
Role: errorRole
Category: BW-Plugin
Description: Line is too long. Specified Line Delimiter may not match file content.
Resolution: Please check your input values.
BW-PARSE-100013: There are not enough data for the number of required fields in a row.
Role: errorRole
Category: BW-Plugin
Description: There are not enough data for the number of required fields in a row.
Resolution: Please check your input values.
TIBCO ActiveMatrix BusinessWorks Error Codes
206
| Chapter 14
Parse Palette
TIBCO ActiveMatrix BusinessWorks Error Codes
| 207
Chapter 15
Rendezvous Palette
This chapter describes error codes that can be returned by activities in the
Rendezvous palette.
Topics
•
TIBCO Rendezvous Error Codes, page 208
TIBCO ActiveMatrix BusinessWorks Error Codes
208
| Chapter 15
Rendezvous Palette
TIBCO Rendezvous Error Codes
BW-TIBRV-100000: Cannot create Transport
Role: errorRole
Category: BW-Plugin
Description: Cannot create Transport
Resolution: Please check the transport configuration
BW-TIBRV-100001: Error in sending message
Role: errorRole
Category: BW-Plugin
Description: Error in sending message
Resolution: Please Contact TIBCO Support
BW-TIBRV-100002: Error serializing the message
Role: errorRole
Category: BW-Plugin
Description: Error serializing the message
Resolution: Please Contact TIBCO Support
BW-TIBRV-100003: Error in sending request
Role: errorRole
Category: BW-Plugin
Description: Error in sending request
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
|
TIBCO Rendezvous Error Codes 209
BW-TIBRV-100004: Error in processing event: [%1]
Role: errorRole
Category: BW-Plugin
Description: Error in processing event
Resolution: Please Contact TIBCO Support
BW-TIBRV-100005: Cannot create TibrvQueue: [%1]
Role: errorRole
Category: BW-Plugin
Description: Cannot create TibrvQueue
Resolution: Please Contact TIBCO Support
BW-TIBRV-100006: Cannot create rvEventContext: [%1]
Role: errorRole
Category: BW-Plugin
Description: Cannot create rvEventContext
Resolution: Please Contact TIBCO Support
BW-TIBRV-100007: Cannot create reply listener for subject: [%1]
Role: errorRole
Category: BW-Plugin
Description: Cannot create reply listener, for subject: [%1]
Resolution: Please Contact TIBCO Support
BW-TIBRV-100008: Cannot activate TIBRV listener for subject: [%1]
Role: errorRole
Category: BW-Plugin
Description: Cannot activate TIBRV listener for subject: [%1]
TIBCO ActiveMatrix BusinessWorks Error Codes
210
| Chapter 15
Rendezvous Palette
Resolution: Please Contact TIBCO Support
BW-TIBRV-100009: Error in sending reply
Role: errorRole
Category: BW-Plugin
Description: Error in sending reply
Resolution: Please Contact TIBCO Support
BW-TIBRV-100010: Reply For-field not set in reply activity
Role: errorRole
Category: BW-Plugin
Description: Reply For-field not set in reply activity
Resolution: Please set the needed field in the activity
BW-TIBRV-100011: Cannot reply to [%1]: activity not found in process
Role: errorRole
Category: BW-Plugin
Description: Cannot reply to configured eventsource. It is not found in process
Resolution: Make sure to have RV-EventSource in the process to which the
reply-activity needs to reply
BW-TIBRV-100012: Transport parameter not specified
Role: errorRole
Category: BW-Plugin
Description: Configure a valid transport reference on the Activity/EventSource
Resolution: Configure a valid transport reference on the Activity/EventSource
TIBCO ActiveMatrix BusinessWorks Error Codes
|
TIBCO Rendezvous Error Codes 211
BW-TIBRV-100013: Subject parameter not specified
Role: errorRole
Category: BW-Plugin
Description: Configure a valid subject-name on the Activity/EventSource
Resolution: Configure a valid subject-name on the Activity/EventSource
BW-TIBRV-100014: Daemon Certificate not specified
Role: errorRole
Category: BW-Plugin
Description: Configure a valid daemon certificate in SSL configuration
Resolution: Configure a valid daemon certificate in SSL configuration
BW-TIBRV-100015: Identity not specified
Role: errorRole
Category: BW-Plugin
Description: Configure a valid identity in SSL configuration
Resolution: Configure a valid identity in SSL configuration
BW-TIBRV-100016: [%1]
Role: errorRole
Category: BW-Plugin
Description: The exception will give information for the problem encountered.
Resolution: The exception will give information for the problem encountered.
BW-TIBRV-100017: Reply Subject is not specified.
Role: errorRole
Category: BW-Plugin
Description: Specify the reply subject in the configuration/inputdata.
TIBCO ActiveMatrix BusinessWorks Error Codes
212
| Chapter 15
Rendezvous Palette
Resolution: Specify the reply subject in the configuration/inputdata.
BW-TIBRV-100018: CM Name is not specified. If omitted, a unique, non-reusable name will be
generated for the duration of the transport.
Role: errorRole
Category: BW-Plugin
Description: CM Name is not specified. If omitted, a unique, non-reusable name
will be generated for the duration of the transport.
Resolution: CM Name is not specified. If omitted, a unique, non-reusable name
will be generated for the duration of the transport.
BW-TIBRV-100019: Specified Global-Variable is not found for [%1].
Role: errorRole
Category: BW-Plugin
Description: Specified Global-Variable is not found for the attribute.
Resolution: Please specify the initialized Globle-Variable.
BW-TIBRV-100020: Scheduler Weight of 0 is not allowed with the Worker Complete Time
Role: errorRole
Category: BW-Plugin
Description: Scheduler Weight of 0 is not allowed with the Worker Complete
Time
Resolution: Please refer to the documentation for correct combination of values
TIBCO ActiveMatrix BusinessWorks Error Codes
|
TIBCO Rendezvous Error Codes 213
BW-TIBRV-100021: Reply not Specified
Role: errorRole
Category: BW-Plugin
Description: Specify the input schema for the Rendezvous Reply activity.
Resolution: Specify the input schema for the Rendezvous Reply activity.
BW-TIBRV-200001: Rendezvous Subscriber/Wait for Rendezvous Message-exception setting
certified output field: [%1], Event-Source-Name: [%2].
Role: warnRole
Category: BW-Plugin
Description: Rendezvous Subscriber/Wait for Rendezvous Message-exception
setting certified output field.
Resolution:
BW-TIBRV-200002: Transport selected for the Rendezvous Subscriber/Wait for Rendezvous
Message does not support confirm.
Role: warnRole
Category: BW-Plugin
Description: Transport selected for the Rendezvous Subscriber/Wait for
Rendezvous Message does not support confirm.
Resolution:
BW-ADVISORY-100000: Advisory listening queue caught exception: %1
Role: errorRole
Category: BW-Plugin
Description: Advisory listening queue caught exception. Exception detail
provided
Resolution: Please Contact TIBCO Support
TIBCO ActiveMatrix BusinessWorks Error Codes
214
| Chapter 15
Rendezvous Palette
BW-ADVISORY-300000: Advisory: %1
Role: infoRole
Category: BW-Plugin
Description: Advisory provided
Resolution: N/A
BW-ADVISORY-300001: Advisory info: %1
Role: infoRole
Category: BW-Plugin
Description: Advisory information provided
Resolution: N/A
TIBCO ActiveMatrix BusinessWorks Error Codes
| 215
Chapter 16
SOAP Palette
This chapter describes error codes that can be returned by activities in the SOAP
palette.
Topics
•
SOAP Error Codes, page 216
TIBCO ActiveMatrix BusinessWorks Error Codes
216
| Chapter 16
SOAP Palette
SOAP Error Codes
SOAPPLUGIN-100001: Unable to create Transport
Role: errorRole
Category: BW_Plugins
Description: Error initializing the transport
Resolution: Please check the transport configuration
SOAPPLUGIN-100002: SOAP Envelope is invalid
Role: errorRole
Category: BW_Plugins
Description: The request or response enevelope received from the remote host is
invalid
Resolution: Please verify the SOAP envelope
SOAPPLUGIN-100003: Unable to serialize the SOAP envelope
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please check the input data to this activity and the make sure that it is
consistent with the WSDL description
SOAPPLUGIN-100004: Unable to deserialize the SOAP envelope
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please check the input data to this activity and the make sure that it is
consistent with the WSDL description
TIBCO ActiveMatrix BusinessWorks Error Codes
|
SOAP Error Codes 217
SOAPPLUGIN-100005: Unable to process the SOAP envelope
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please check the input data to this activity and the WSDL description
SOAPPLUGIN-100006: The SOAP processor could not be instantiated
Role: errorRole
Category: BW_Plugins
Description: This is an internal error
Resolution: Please contact TIBCO support
SOAPPLUGIN-100007: The SOAP service is invalid
Role: errorRole
Category: BW_Plugins
Description: This is an internal error
Resolution: Please contact TIBCO support
SOAPPLUGIN-100008: SOAP Envelope has no data
Role: errorRole
Category: BW_Plugins
Description: The request or response message received from the remote server is
invalid
Resolution: Please make sure the endpoint is a valid soap 1.1 server
TIBCO ActiveMatrix BusinessWorks Error Codes
218
| Chapter 16
SOAP Palette
SOAPPLUGIN-100009: Error parsing SOAP message
Role: errorRole
Category: BW_Plugins
Description: The request or response message received from the remote server is
invalid
Resolution: Please make sure the endpoint is a valid soap 1.1 server
SOAPPLUGIN-100010: Error while adding xsi:type attribute
Role: errorRole
Category: BW_Plugins
Description: Internal error
Resolution: Please make sure that you are using the supported schema flavor
SOAPPLUGIN-100011: Part accessor for the message-part not found in the soap envelope
Role: errorRole
Category: BW_Plugins
Description: The request or response message received from the remote server is
invalid
Resolution: Please check the input data to this activity and the make sure that it is
consistent with the WSDL description
SOAPPLUGIN-100012: Unable to send soap reply message
Role: errorRole
Category: BW_Plugins
Description: The remote server may have closed the connection or there is an
internal exception
Resolution: Please correct the connection error
TIBCO ActiveMatrix BusinessWorks Error Codes
|
SOAP Error Codes 219
SOAPPLUGIN-100014: Unable to send reply or fault message. Please check the operation type
Role: errorRole
Category: BW_Plugins
Description: The specified operation may not throw a soap fault or send soap
reply
Resolution: Please make sure that you have an operation which allows reply and
fault messages
SOAPPLUGIN-100016: Unable to convert a soap fault message to activity output
Role: errorRole
Category: BW_Plugins
Description: This is an internal error occurs when the soap request activity is not
initialized
Resolution: Please contact TIBCO support
SOAPPLUGIN-100017: Unable to initialize the URL resolvers for builtin services
Role: errorRole
Category: BW_Plugins
Description: This is an internal error
Resolution: Please contact TIBCO support
SOAPPLUGIN-100018: Unable to get the specified resource
Role: errorRole
Category: BW_Plugins
Description: The resource URL or filter may be invalid or there is no resolver for
the kind of URL specified
Resolution: Please specify the correct URL
TIBCO ActiveMatrix BusinessWorks Error Codes
220
| Chapter 16
SOAP Palette
SOAPPLUGIN-100019: A security error while trying to load the certficiate [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The certificate path may be invalid or the certificate type is
unsupported
Resolution: Please specify the correct path
SOAPPLUGIN-100020: An IO error occurred while trying to load the certificate [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The certificate path may be invalid or the certificate type is
unsupported
Resolution: Please specify the correct path
SOAPPLUGIN-100021: An IO error while trying send soap message [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: SOAP Driver could not send the message
Resolution: Please make sure that you have specified the correct endpoint
infomation
SOAPPLUGIN-100022: An IO error while loading client key [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The client key path may be invalid or the KEY type is unsupported
Resolution: Please specify the correct path
TIBCO ActiveMatrix BusinessWorks Error Codes
|
SOAP Error Codes 221
SOAPPLUGIN-100023: Soap fault message is received
Role: errorRole
Category: BW_Plugins
Description: Fault Details element provides more informaiton
Resolution: Remote server has responded with a soap fault message, it is usually
thrown when the input data is invalid or soap server doesn't support the version
of the saop message or mandatory soap headers are not specified
SOAPPLUGIN-100024: HTTP error [ %1 ] Message Received
Role: errorRole
Category: BW_Plugins
Description: Please refer to the HTTP specifications for more information about
the error code
Resolution:
SOAPPLUGIN-100025: Input data error. Resource path [ %1 ] is invalid
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please correct the resource path in the retrieve resources activity
SOAPPLUGIN-100026: Input data error. Resource filter [ %1 ] is invalid
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please specify the correct resource filter wsdl, wsil or xsd
TIBCO ActiveMatrix BusinessWorks Error Codes
222
| Chapter 16
SOAP Palette
SOAPPLUGIN-100027: Message part accessor not found in part [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The request or response message received from the remote server is
invalid
Resolution: Please check the input data to this activity and the make sure that it is
consistent with the WSDL description
SOAPPLUGIN-100028: Data not found for resource [ %1 ] using filter [ %2 ]
Role: errorRole
Category: BW_Plugins
Description: The supported filters are wsdl, wsil or xsd. For other filters
resourceData may not available as ascii
Resolution: Please correct the resource path in the retrieve resources activity
SOAPPLUGIN-100032: Duplicate soapAction value [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The soapAction value must be unique accross all Soap Event Sources
to correctly dispatch the soap messages
Resolution: Please check other SOAP Event Source activities and make sure that
the soapAction is not duplicated
SOAPPLUGIN-100033: Duplicate WSDL Target Namespace value [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The Target Namespace specified on advanced tab must be unique
accross all Soap Event Sources
Resolution: Please check other SOAP Event Source activities and make sure that
the Target Namespace is not duplicated
TIBCO ActiveMatrix BusinessWorks Error Codes
|
SOAP Error Codes 223
SOAPPLUGIN-100034: Configuration Error. The specified operation name [ %1 ] not found in
portType [ %2 ]
Role: errorRole
Category: BW_Plugins
Description: The operation name is invalid
Resolution: Please ensure that the WSDL file has the specified operation name
SOAPPLUGIN-100035: Configuration Error. Transport is not specified for this service
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please specify a HTTP or HTTPS transport using HTTP Connection
resource
SOAPPLUGIN-100036: Configuration Error. SoapAction is not specified for this service
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please specify a non null SoapAction
SOAPPLUGIN-100037: Configuration Error. Operation style is invalid
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please specify document or rpc
TIBCO ActiveMatrix BusinessWorks Error Codes
224
| Chapter 16
SOAP Palette
SOAPPLUGIN-100038: Configuration Error. Use attribute is invalid
Role: errorRole
Category: BW_Plugins
Description:
Resolution: Please specify literal or encoded
SOAPPLUGIN-100039: Configuration Error. The specified operation name [ %1 ] not found in
port [ %2 ] in service [ %3 ]
Role: errorRole
Category: BW_Plugins
Description: The operation name is invalid
Resolution: Please ensure that the WSDL file has the specified operation name
SOAPPLUGIN-100040: Configuration Error. The message part [ %1 ] is defined using 'element'
attribute instead of 'type'
Role: errorRole
Category: BW_Plugins
Description: Soap encoding rules require the message part to be defined with
type attribute
Resolution: Please modify the WSDL message definition to use schema type
SOAPPLUGIN-100041: Configuration Error. Only one message part can be defined using 'type'
attribute for document style services in literal encoding
Role: errorRole
Category: BW_Plugins
Description: Document Literal encoding rules require only one message part to be
defined with type attribute
Resolution: Please modify the WSDL message definition
TIBCO ActiveMatrix BusinessWorks Error Codes
|
SOAP Error Codes 225
SOAPPLUGIN-100042: Configuration Error. All Parts must be defined using either 'type' or
'element'
Role: errorRole
Category: BW_Plugins
Description: Mixing type and element attributes for the message parts is not
permitted
Resolution: Please modify the WSDL message definition
SOAPPLUGIN-100043: Configuration Error. Multiple %1 parts defined using same name are
not supported
Role: errorRole
Category: BW_Plugins
Description: Local names for two or more parts is same
Resolution: Please modify the headers configuration
SOAPPLUGIN-100044: Runtime error in SOAP service: %1
Role: errorRole
Category: BW_Plugins
Description: This is an internal error
Resolution: Please contact TIBCO support
SOAPPLUGIN-100045: Runtime error in SOAP client: %1
Role: errorRole
Category: BW_Plugins
Description: This is an internal error
Resolution: Please contact TIBCO support
TIBCO ActiveMatrix BusinessWorks Error Codes
226
| Chapter 16
SOAP Palette
SOAPPLUGIN-100046: Unable to serialize the MIME envelope. Please make sure that mimePart
content (binaryContent|textContent|fileName) is consistent with content-type
Role: errorRole
Category: BW_Plugins
Description: Unable to serialize the MIME envelope. Please make sure that
mimePart content (binaryContent|textContent|fileName) is consistent with
content-type
Resolution: Please make sure that mimePart content
(binaryContent|textContent|fileName) is consistent with content-type
SOAPPLUGIN-100047: Unable to dispatch the SOAP message to a Service. The
URL/SoapAction specified in the incoming message was invalid.
Role: errorRole
Category: BW_Plugins
Description: Unable to dispatch the SOAP message to a Service. The
URL/SoapAction specified in the incoming message was invalid.
Resolution: Please make sure that the client is using an up to date WSDL file
SOAPPLUGIN-100048: An exception with the following message was thrown while
deserializing/processing the incoming SOAP message: [ % 1]
Role: errorRole
Category: BW_Plugins
Description: An exception was thrown while deserializing/processing the
incoming SOAP message.
Resolution: Please make sure that the client is using an up to date WSDL file
TIBCO ActiveMatrix BusinessWorks Error Codes
|
SOAP Error Codes 227
SOAPPLUGIN-100049: The system cannot find the file specified
Role: errorRole
Category: BW_Plugins
Description: The system cannot find the file specified
Resolution: Please make sure that the specified file exists on the system
SOAPPLUGIN-100501: A java exception has occured. [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The configuration or input data of the activity might have caused
this error
Resolution: Please correct the errors
SOAPPLUGIN-100502: Illegal Argument exception has occured. [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The configuration or input data of the activity might have caused
this error
Resolution: Please correct the errors
SOAPPLUGIN-100503: A java exception has occured while constructing the WSDL file. [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The configuration or input data of the activity might have caused
this error
Resolution: Please correct the errors
TIBCO ActiveMatrix BusinessWorks Error Codes
228
| Chapter 16
SOAP Palette
SOAPPLUGIN-100504: IO exception has occured. [ %1 ]
Role: errorRole
Category: BW_Plugins
Description: The configuration or input data of the activity might have caused
this error
Resolution: Please correct the errors
SOAPPLUGIN-100505: Unable to create WSDL file due to insufficient configuration
Role: errorRole
Category: BW_Plugins
Description: Provide values for all the mandatroty configuration fields marked in
the bold font
Resolution: Please correct the errors
TIBCO ActiveMatrix BusinessWorks Error Codes
| 229
Chapter 17
TCP Palette
This chapter describes error codes that can be returned by activities in the TCP
palette.
Topics
•
TCP Error Codes, page 230
TIBCO ActiveMatrix BusinessWorks Error Codes
230
| Chapter 17
TCP Palette
TCP Error Codes
BW-TCP-100001: Cannot start TCP Receiver on Host '%1', Port '%2'. Reason: %3
Role: errorRole
Category: BW_Plugin
Description: Cannot create Server Socket on %1:%2. Reason: %3
Resolution: Please correct the error and retry.
BW-TCP-100002: 'TCP connection' field is required.
Role: errorRole
Category: BW_Plugin
Description: 'TCP connection' field is required.
Resolution: Please correct the error and retry.
BW-TCP-100003: Invalid Port; port must be numeric. Error: %1
Role: errorRole
Category: BW_Plugin
Description: Invalid Port; port must be numeric. Error: %1
Resolution: Please correct the error and retry.
BW-TCP-100004: No value specified for the 'data' input field.
Role: errorRole
Category: BW_Plugin
Description: No value specified for the 'data' input field.
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
TCP Error Codes 231
BW-TCP-100005: Cannot process TCP request. Reason: %1
Role: errorRole
Category: BW_Plugin
Description: Cannot process TCP request. Reason: %1
Resolution: Please correct the error and retry.
BW-TCP-100006: Error reading TCP data. Reason: %1
Role: errorRole
Category: BW_Plugin
Description: Error reading TCP data. Reason: %1
Resolution: Please correct the error and retry.
BW-TCP-100007: Unknown separator type: %1.
Role: errorRole
Category: BW_Plugin
Description: Unknown separator type: %1.
Resolution: Please correct the error and retry.
BW-TCP-100008: Error opening TCP Connection. Reason: %1.
Role: errorRole
Category: BW_Plugin
Description: Error opening TCP Connection. Reason: %1.
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
232
| Chapter 17
TCP Palette
BW-TCP-100009: Error opening TCP Connection. Reason: Host '%1' unknown
Role: errorRole
Category: BW_Plugin
Description: Error opening TCP Connection. Reason: Host '%1' unknown
Resolution: Please correct the error and retry.
BW-TCP-100010: Error reading data. Reason: Bytes to read can not be zero
Role: errorRole
Category: BW_Plugin
Description: Error reading data. Reason: Bytes to read can not be zero
Resolution: Please correct the error and retry.
BW-TCP-100011: Error reading data. Reason: Stream has no data, end of stream reached.
Role: errorRole
Category: BW_Plugin
Description: Error reading data. Reason: Stream has no data, end of stream
reached.
Resolution: Please correct the error and retry.
BW-TCP-100012: Exception reading data. Separator '%1' not found in data after reading %2
bytes. Reason: %3
Role: errorRole
Category: BW_Plugin
Description: Exception reading data. Separator '%1' not found in data after
reading %2 bytes. Reason: %3
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
TCP Error Codes 233
BW-TCP-100013: Exception closing TCP Connection. Reason: %1
Role: errorRole
Category: BW_Plugin
Description: Exception closing TCP Connection. Reason: %1
Resolution: Please correct the error and retry.
BW-TCP-100014: Could not read from TCP connection. The input connection is either invalid
or closed.
Role: errorRole
Category: BW_Plugin
Description: Could not read from TCP connection. The input connection is either
invalid or closed.
Resolution: Please correct the error and retry.
BW-TCP-100015: Could not write to TCP connection. The input connection is either invalid or
closed.
Role: errorRole
Category: BW_Plugin
Description: Could not write to TCP connection. The input connection is either
invalid or closed.
Resolution: Please correct the error and retry.
BW-TCP-100016: Can not start TCP Receiver on Host='%1',Port='%2'. Another TCP Receiver is
already running with the same configuration.
Role: errorRole
Category: BW_Plugin
Description: Can not start TCP Receiver on Host='%1',Port='%2'. Another TCP
Receiver is already running with the same configuration.
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
234
| Chapter 17
TCP Palette
BW-TCP-100017: Error closing TCP connection. Reason: No connection is available which
matches the input connection key
Role: errorRole
Category: BW_Plugin
Description: Error closing TCP connection. Reason: No connection is available
which matches the input connection key
Resolution: Please correct the error and retry.
BW-TCP-100018: Error writing data. Reason: %1
Role: errorRole
Category: BW_Plugin
Description: Error writing data. Reason: %1
Resolution: Please correct the error and retry.
BW-TCP-100019: Error writing data. Reason: Bytes to write can not be zero
Role: errorRole
Category: BW_Plugin
Description: Error writing data. Reason: Bytes to write can not be zero
Resolution: Please correct the error and retry.
BW-TCP-100020: Error in configuring field '%1'. Pl. specify comma separated byte values e.g.
"0x0A,0x05,0x0c". For valid string representation of byte values, refer to the Javadoc for
decode(String nm) method of class java.lang.Byte
Role: errorRole
Category: BW_Plugin
Description: Error in configuring field '%1'. Pl. specify comma separated byte
values e.g. "0x0A,0x05,0x0c". For valid string representation of byte values, refer
to the Javadoc for decode(String nm) method of class java.lang.Byte
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
TCP Error Codes 235
BW-TCP-100021: Timeout while reading TCP data
Role: errorRole
Category: BW_Plugin
Description: Timeout while reading TCP data
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
236
| Chapter 17
TCP Palette
TIBCO ActiveMatrix BusinessWorks Error Codes
| 237
Chapter 18
Transaction Palette
This chapter describes error codes that can be returned by activities in the
Transaction palette.
Topics
•
Transaction Error Codes, page 238
TIBCO ActiveMatrix BusinessWorks Error Codes
238
| Chapter 18
Transaction Palette
Transaction Error Codes
BW-TRANS-100001: Initialization Error. %1
Role: errorRole
Category: BW_Plugin
Description:
Resolution:
BW-TRANS-100002: Get transaction status error. %1
Role: errorRole
Category: BW_Plugin
Description: Exception occurred while trying to obtain the status of the
transaction from the transaction manager.
Resolution:
BW-TRANS-100003: Transaction setRollbackOnly error. %1
Role: errorRole
Category: BW_Plugin
Description: Exception occurred while trying to mark the transaction for rollback
only
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Transaction Error Codes 239
BW-TRANS-100004: Unable to obtain the status of the transaction. Exception [%1] occurred.
%2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred while trying to obtain the status of the
transaction.
Resolution:
BW-TRANS-100005: Unable to set the transaction for rollback only. Exception [%1] occurred.
%2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred while trying to set the transaction for rollback
only
Resolution:
BW-TRANS-400000: %1
Role: debugRole
Category: BW_Plugin
Description: Debug Trace Message
Resolution: None
BW-JTATM-100001: Transaction Manager Initialization Error. %1
Role: errorRole
Category: BW_Plugin
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
240
| Chapter 18
Transaction Palette
BW-JTATM-100002: Unable to obtain the status of the transaction. The method
'UserTransaction.getStatus' raised exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method
'javax.transaction.UserTransaction.getStatus()'.
Resolution:
BW-JTATM-100003: Unable to set the transaction for rollback only. The method
'UserTransaction.setRollbackOnly' raised exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method
'javax.transaction.UserTransaction.setRollbackOnly()'.
Resolution:
BW-JTATM-100004: Transaction begin error. The method 'UserTransaction.begin' raised
exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method
'javax.transaction.UserTransaction.begin()'
Resolution: Please correct the error stated in the exception message and retry
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Transaction Error Codes 241
BW-JTATM-100005: Transaction commit error. The method 'UserTransaction.commit' raised
exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method
'javax.transaction.UserTransaction.commit()'
Resolution: Please correct the error stated in the exception message and retry
BW-JTATM-100006: Transaction rollback error. The method 'UserTransaction.rollback' raised
exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method
'javax.transaction.UserTransaction.rollback()'
Resolution: Please correct the error stated in the exception message and retry
BW-JTATM-100007: Unable to set timeout for transaction. The method
'UserTransaction.setTransactionTimeout' raised exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method
'javax.transaction.UserTransaction.setTransactionTimeout()'
Resolution: Please correct the error stated in the exception message and retry
BW-JTATM-100008: Unable resume the transaction. The method 'resume' of the JTATM raised
exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method 'resume'.
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
242
| Chapter 18
Transaction Palette
BW-JTATM-100009: Unable suspend the transaction. The method 'suspend' of the JTATM
raised exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method 'suspend'.
Resolution:
BW-JTATM-100010: XAResource registration error. The method 'registerResource' of the
JTATM raised exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred when trying register XAResource with the
Transaction Manager
Resolution:
BW-JTATM-100011: Unable to enlist XAResource with the transaction object. The method
'enlistResource' of the JTATM raised exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred when trying enlist XAResource with the
transaction object
Resolution:
BW-JTATM-100012: Unable to delist XAResource from the transaction object. The method
'delistResource' of the JTATM raised exception [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred when trying delist XAResource from the
transaction context
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Transaction Error Codes 243
BW-JTATM-100013: The JTA UserTransaction Configuration reference [%1] specified for the
Transaction Group contains incorrect field values.
Role: errorRole
Category: BW_Plugin
Description: The JTA UserTransaction Configuration activity referenced by this
Transaction group contains invalid field values.
Resolution: Please correct the error and retry.
BW-JTATM-100014: Connection Test Failed. %1
Role: errorRole
Category: BW_Plugin
Description: Unable to establish connection to the server.
Resolution: Please correct the error stated in the exception message and retry.
BW-JTATM-100015: Connection Test Failed. Exception [%1] occurred.
Role: errorRole
Category: BW_Plugin
Description: Unable to establish connection to the server. Exception occurred
Resolution: Please correct the error stated in the exception message and retry.
BW-JTATM-100016: Java class [%1] not found in the classpath. ClassNotFoundException
occurred. %2
Role: errorRole
Category: BW_Plugin
Description: ClassNotFoundException occurred while trying to access the
specified Java class.
Resolution: Please verify that the specified class file is contained in the classpath.
TIBCO ActiveMatrix BusinessWorks Error Codes
244
| Chapter 18
Transaction Palette
BW-JTATM-100017: Error occurred while trying to obtain the JNDI Configuration shared
resource reference [%1]: %2
Role: errorRole
Category: BW_Plugin
Description: Unable to get the shared JNDI Configuration resource referenced by
the JTA UserTransaction Configuration
Resolution: Please correct the error and retry.
BW-JTATM-100018: Unable to create an instance of 'javax.naming.InitialContext'.
NamingException occurred. %1
Role: errorRole
Category: BW_Plugin
Description: Exception of type 'javax.naming.NamingException' occurred while
trying to construct an instance of 'javax.naming.InitialContext'.
Resolution: Please correct the specified NamingException and retry.
BW-JTATM-100019: Unable to create an instance of 'javax.naming.InitialContext'. Exception
[%1] occurred. %2
Role: errorRole
Category: BW_Plugin
Description: Exception occurred while trying to construct an instance of
'javax.naming.InitialContext'.
Resolution: Please correct the error stated in the exception message and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Transaction Error Codes 245
BW-JTATM-100020: Unable to obtain UserTransaction object for the JNDI name [%1].
NamingException occurred. %2
Role: errorRole
Category: BW_Plugin
Description: Exception of type 'javax.naming.NamingException' occurred on
invocation of the method 'javax.naming.InitialContext.lookup(..)'
Resolution: Please correct the specified NamingException and retry.
BW-JTATM-100021: Unable to obtain the UserTransaction object for the JNDI name [%1].
Exception [%2] occurred. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method
'javax.naming.InitialContext.lookup(..)'
Resolution: Please correct the specified NamingException and retry.
BW-JTATM-400000: %1
Role: debugRole
Category: BW_Plugin
Description: Debug Trace Message
Resolution: None
BW-XATM-100001: Transaction Manager Initialization Error. The method 'init' of the [%1]
Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description:
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
246
| Chapter 18
Transaction Palette
BW-XATM-100002: Unable to obtain the status of the transaction. The method 'getStatus' of
the [%1] Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the Transaction Manager's
getStatus method
Resolution:
BW-XATM-100003: Unable to set the transaction for rollback only. The method
'setRollbackOnly' of the [%1] Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the Transaction Manager's
setRollbackOnly method.
Resolution:
BW-XATM-100004: Transaction begin error. The method 'begin' of the [%1] Transaction
Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the Transaction Manager's
begin method
Resolution: Please correct the error stated in the exception message and retry
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Transaction Error Codes 247
BW-XATM-100005: Transaction commit error. The method 'commit' of the [%1] Transaction
Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the Transaction Manager's
commit method
Resolution: Please correct the error stated in the exception message and retry
BW-XATM-100006: Transaction rollback error. The method 'rollback' of the [%1] Transaction
Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the TransactionManager's
rollback method
Resolution: Please correct the error stated in the exception message and retry
BW-XATM-100007: Unable to set timeout for transaction. The method 'setTransactionTimeout'
of the [%1] Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the Transaction Manager's
setTransactionTimeout method
Resolution: Please correct the error stated in the exception message and retry
TIBCO ActiveMatrix BusinessWorks Error Codes
248
| Chapter 18
Transaction Palette
BW-XATM-100008: Unable resume the transaction. The method 'resume' of the [%1]
Transaction Manager's exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the TransactionManager's
resume method
Resolution:
BW-XATM-100009: Unable suspend the transaction. The method 'suspend' of the [%1]
Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the Transaction Manager's
suspend method
Resolution:
BW-XATM-100010: XAResource registration error. The method 'registerResource' of the [%1]
Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred when trying register XAResource with the
Transaction Manager
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Transaction Error Codes 249
BW-XATM-100011: Unable to enlist XAResource with the transaction object. The method
'enlistResource' of the [%1] Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred when trying enlist XAResource with the
transaction object
Resolution:
BW-XATM-100012: Unable to delist XAResource from the transaction object. The method
'delistResource' of the [%1] Transaction Manager raised exception [%2]. %3
Role: errorRole
Category: BW_Plugin
Description: Exception occurred when trying delist XAResource from the
transaction object
Resolution:
BW-XATM-100013: The XA TransactionManager Configuration reference [%1] specified for the
Transaction Group contains incorrect field values.
Role: errorRole
Category: BW_Plugin
Description: The XA TransactionManager Configuration activity referenced by
this Transaction group contains invalid field values.
Resolution: Please correct the error and retry.
BW-XATM-100014: The XA TransactionManager Configuration reference [%1] not found
Role: errorRole
Category: BW_Plugin
Description: Unable to obtain the specified XA TransactionManager
Configuration shared resource reference
Resolution: Please correct the error and retry.
TIBCO ActiveMatrix BusinessWorks Error Codes
250
| Chapter 18
Transaction Palette
BW-XATM-100015: The XA TransactionManager Configuration reference [%1] not found in
repository
Role: errorRole
Category: BW_Plugin
Description: The repository does not contain the specified XA
TransactionManager Configuration shared resource reference
Resolution: Please correct the error and retry.
BW-XATM-100016: Exception occurred while trying to obtain the XA TransactionManager
Configuration reference [%1]: %2
Role: errorRole
Category: BW_Plugin
Description: Unable to obtain the XA TransactionManager Configuration shared
resource reference
Resolution: Please correct the error and retry.
BW-XATM-100017: Method [%1] of the [%2] Transaction Manager raised exception [%3]. %4
Role: errorRole
Category: BW_Plugin
Description: Exception occurred on invocation of the method of the Transaction
Manager
Resolution: Please correct the error stated in the exception message and retry
TIBCO ActiveMatrix BusinessWorks Error Codes
|
Transaction Error Codes 251
BW-XATM-100018: Invalid [%1] Transaction Manager reference (XATransactionManager.m_tm
== null).
Role: errorRole
Category: BW_Plugin
Description: XA Transaction Manager reference contains invalid value.
Resolution: Make sure the method
"XATransactionManager.setTransactionManager" is called after constructing the
custom TransactionManager in the method "XATransactionManager.init".
BW-XATM-100019: ClassNotFoundException occurred during initialization of the [%1]
transaction manager. The classpath does not contain the required [%2] transaction manager's
class or jar files. %3
Role: errorRole
Category: BW_Plugin
Description: ClassNotFoundException occurred while trying to access the
transaction manager's Java class.
Resolution: Please verify that the required transaction manger's java jar or class
file is contained in the classpath.
BW-XATM-300001: %1 object store directory: %2
Role: infoRole
Category: BW_Plugin
Description: Location of the transaction manager object store directory
Resolution:
BW-XATM-400000: %1
Role: debugRole
Category: BW_Plugin
Description: Debug Trace Message
Resolution: None
TIBCO ActiveMatrix BusinessWorks Error Codes
252
| Chapter 18
Transaction Palette
TIBCO ActiveMatrix BusinessWorks Error Codes
| 253
Chapter 19
XML Activities Palette
This chapter describes error codes that can be returned by activities in the XML
Activities palette.
Topics
•
XML Error Codes, page 254
TIBCO ActiveMatrix BusinessWorks Error Codes
254
| Chapter 19
XML Activities Palette
XML Error Codes
BW-XML-000000: Internal error occurred. Class=%1, Method=%2, Reason=%3
Role: errorRole
Category: BW_Plugin
Description: Internal error occurred
Resolution: Please Contact TIBCO Support
BW-XML-100001: Activity configuration error. %1
Role: errorRole
Category: BW_Plugin
Description: This activity is not configured correctly
Resolution: Please correct the error and retry.
BW-XML-100002: Unable to get value for the global variable [%1]. %2
Role: errorRole
Category: BW_Plugin
Description: Unable to get value for the specified global variable
Resolution: Make sure that the specified global variable is defined.
BW-XML-100003: Invalid global variable. The global variable [%1] may not have been defined.
Role: errorRole
Category: BW_Plugin
Description: Unable to get value for the specified global variable
Resolution: Make sure that the specified global variable is defined.
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XML Error Codes 255
BW-XML-100004: An error occurred while serializing the XML: %1
Role: errorRole
Category: BW_Plugin
Description: An error occuring while serializing the XML.
Resolution: Please correct.
BW-XML-100005: An error occurred while parsing: %1.
Role: errorRole
Category: BW_Plugin
Description: Error occurred while parsing.
Resolution: Examine input for validity..
BW-XML-100006: The [%1] occurred during XSLT transformation: %2
Role: errorRole
Category: BW_Plugin
Description: Error occurred during XSLT transformation.
Resolution: Examine input for validity..
BW-XML-100007: No stylesheet for XSLT transformation
Role: errorRole
Category: BW_Plugin
Description: No stylesheet for XSLT transformation
Resolution: Examine input for validity..
TIBCO ActiveMatrix BusinessWorks Error Codes
256
| Chapter 19
XML Activities Palette
BW-XML-100008: The selected encoding [%1] is not valid.
Role: errorRole
Category: BW_Plugin
Description: The selected encoding is invalid.
Resolution: Please use a valid encoding.
BW-XML-100009: Encoding error occurred: %1.
Role: errorRole
Category: BW_Plugin
Description: Error occurred while encoding.
Resolution: Please ensure that selected encoding is legal.
BW-XML-100010: The encoded bytes content is empty.
Role: errorRole
Category: BW_Plugin
Description: Content cannot be empty.
Resolution: Please ensure that the content is not empty.
BW-XML-100011: [%1]
Role: errorRole
Category: BW_Plugin
Description: ?.
Resolution: ?
TIBCO ActiveMatrix BusinessWorks Error Codes
|
XML Error Codes 257
BW-XML-100012: The input document's root element [%1] does not match the desired output's
root element [%2].
Role: errorRole
Category: BW_Plugin
Description: The output type doesn't match the root of the input document.
Resolution: Either modify the incoming document or change the output mapping
to accurately reflect that docuement's contents.
BW-XML-100501: Using the old XML render code
Role: infoRole
Category: BW_Plugin
Description: Using the old XML render code
Resolution:
BW-XML-100502: Using the optimized XML render code
Role: infoRole
Category: BW_Plugin
Description: Using the optimized XML render code
Resolution:
TIBCO ActiveMatrix BusinessWorks Error Codes
258
| Chapter 19
XML Activities Palette
TIBCO ActiveMatrix BusinessWorks Error Codes
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement