OPM5 Optical Power Meter

OPM5 Optical Power Meter
OPM5 Optical Power Meter
Features
• Rugged, handheld, lightweight
• Multimode or single-mode applications
• Premises (Ge), Telco (InGaAs), and
Broadband (+26 dBm) models
• Wave ID - automatic wavelength identification and switching
• Passive Optical Networks (PON) testing
• Multiple-wavelength testing
• 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone
detection
• Large LCD with Backlight
• Power measurements in dBm or µW;
insertion loss in dB
• Reference power level storage
• Up to 500 test records per wavelength
storage and download
• USB port for download of stored records
• Free Windows® compatible software to
view, print, and archive test records
• AA alkaline, optional rechargeable NiMH
battery pack or AC adapter
• Battery Gauge
• N.I.S.T traceable
The OPM5 optical power meter may be used to measure optical power in Premises, Telco,
or Broadband fiber optic networks. When used with an LED or Laser light source, the
OPM5 also measures insertion loss of multimode or single-mode cables. The OPM5 offers
Wave ID, automatic wavelength identification and switching, when used with the OLS1Dual, OLS-Dual, or OLS4 with Wave ID feature. Multiple test Tone detection is provided for
fiber identification. The OPM5 stores optical references for each calibrated wavelength.
An easy to read Dual Wavelength LCD display with Backlight shows measured power
[dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength
ID, and the battery charge status. Up to 500 records per wavelength of power or insertion
loss measurements may be stored in internal non-volatile memory. Using the supplied
Windows® compatible software and USB connection, test records may be transferred to
a PC for storage, display, printing, and analysis. In addition to being powered by two AA
alkaline, the OPM5 can be powered by optional AC adapter and/or rechargeable NiMH
battery pack. The OPM5 optical input port accepts Noyes thread-on style adapter caps.
Adapter caps are required for operation and must be ordered separately. The OPM5 is fully
N.I.S.T. traceable.
Specifications
Optical
OPM5-2D
OPM5-3D
OPM5-4D
Calibrated wavelengths (nm)
850, 1300,
1310,1550
850, 1300,
1310, 1550, 1625
850, 980,
1310, 1490, 1550, 1625
Germanium (Ge)
InGaAs
Filtered InGaAs
+6 to -60
+6 to -70
+26 to -50
Tone detect range (dBm)
+6 to -50
+6 to -45 for 850nm
+6 to -50
+6 to -45 for 850nm
+6 to -30
+6 to -25 for 850nm
Wavelength ID range (dBm)
+6 to -50
+6 to -45 for 850nm
+6 to -50
+6 to -45 for 850nm
+6 to -30
+6 to -25 for 850nm
Detector type
Measurement range (dBm)
Accuracy (dB)*
± 0.25
Resolution (dB)
0.01
Measurement units
General
dB, dBm, µW
Power
2 x AA batteries, optional NiMH or AC adapter
Battery life (2 x AA)
300 hours
Operating temperature
-10 to 50°C, 90% RH (non-condensing)
Storage temperature
-30 to 60°C, 90% RH (non-condensing)
Size (H x W x D)
5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight
0.58 lb (0.26 kg)
*Accuracy measured at 25ºC and -10 dBm per N.I.S.T. standards.
All specifications at 25°C
Ordering Information
Test & Inspection
Model
Includes
All OPM5 models
Carry case, USB cable, Windows® compatible software, AA batteries, protective
rubber boot, and manual.
Optical light sources and optical power meters can be packaged together as a kit.
© 2004, AFL Telecommunications, all rights reserved. OPM5-30-2000 Revision B, 9.19.06
Specifications are subject to change without notice.
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement