Paxton Switch2 access control system Application Note

Below you will find brief information for Switch2. The Switch2 system is a standalone access control system that is ideal for sites where event recording is not required. The controller can be mounted on the secure side of the door, providing high security and easy access control. The Switch2 system is easy to install and configure with clear color-coded wiring labels for simple setup. This document outlines the features and installation instructions of the Switch2 system.

PDF Download
Document
Switch2 Access Control System Application Note | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Standalone operation
  • High security
  • Simple installation
  • Easy configuration
  • Suitable for sites without event recording
  • Supports Paxton readers and keypads

Frequently asked questions

The Switch2 control unit is installed on the secure side of the door, and it can be fitted with a door contact to monitor the door's position in case it is forced. An alarm output is also provided to give an audible warning.

The Switch2 system offers a simple and easy-to-use installation, standalone operation for independent configuration, and a high level of security with a secure controller placement. It is ideal for sites that require basic access control and where event recording is not required.

Yes, the Switch2 control unit can be used with any of the readers in the Paxton range.
Preparing document for printing…
0%