2015 Nissan Pathfinder | Owner`s Manual | Nissan USA

2015 Nissan Pathfinder | Owner`s Manual | Nissan USA
®
2015
PATH F I N D E R
OWNER’S MANUAL
For your safety, read carefully and keep in this vehicle.
FOREWORD
Welcome to the growing family of new NISSAN
owners. This vehicle is delivered to you with
confidence. It was produced using the latest
techniques and strict quality control.
This manual was prepared to help you understand the operation and maintenance of your
vehicle so that you may enjoy many miles (kilometers) of driving pleasure. Please read through this
manual before operating your vehicle.
A separate Warranty Information Booklet
explains details about the warranties covering your vehicle. The “NISSAN Service
and Maintenance Guide” explains details
about maintaining and servicing your vehicle. Additionally, a separate Customer
Care/Lemon Law Booklet (U.S. only) will
explain how to resolve any concerns you
may have with your vehicle, and clarify your
rights under your state’s lemon law.
A NISSAN dealership knows your vehicle best.
When you require any service or have any questions, they will be glad to assist you with the
extensive resources available to them.
In addition to factory-installed options, your vehicle may also be equipped with additional accessories installed by NISSAN or by a NISSAN
dealer prior to delivery. It is important that you
familiarize yourself with all disclosures, warnings,
cautions and instructions concerning proper use
READ FIRST—THEN DRIVE SAFELY
of such accessories prior to operating the vehicle
and/or accessory. See a NISSAN dealer for details concerning the particular accessories with
which your vehicle is equipped.
Before driving your vehicle, please read this
Owner’s Manual carefully. This will ensure familiarity with controls and maintenance requirements, assisting you in the safe operation of your
vehicle.
WARNING
IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY!
Follow these important driving rules to
help ensure a safe and comfortable trip
for you and your passengers!
● NEVER drive under the influence of alcohol or drugs.
● ALWAYS observe posted speed limits
and never drive too fast for conditions.
● ALWAYS give your full attention to driving
and avoid using vehicle features or taking
other actions that could distract you.
● ALWAYS use your seat belts and appropriate child restraint systems. Pre-teen
children should be seated in the rear seat.
● ALWAYS provide information about the
proper use of vehicle safety features to
all occupants of the vehicle.
● ALWAYS review this Owner’s Manual
for important safety information.
WHEN READING THE MANUAL
For descriptions specified for 4-wheel drive
models, a 4WD mark is placed at the beginning
of the applicable sections/items.
As with other vehicles with features for
off-road use, failure to operate 4-wheel
drive models correctly may result in loss of
control or an accident. Be sure to read
“Driving safety precautions” in the “Starting and driving” section of this manual.
ON-PAVEMENT AND OFF-ROAD DRIVING
This vehicle will handle and maneuver
differently from an ordinary passenger
car because it has a higher center of
gravity for off-road use. As with other
vehicles with features of this type, failure to operate this vehicle correctly may
result in loss of control or an accident.
For additional information, refer to “Onpavement and off-road driving
precautions,” “Avoiding collision and
rollover” and “Driving safety precautions” in the “Starting and driving” section of this manual.
MODIFICATION OF YOUR VEHICLE
This vehicle should not be modified.
Modification
could
affect
its
performance, safety or durability and may
even violate governmental regulations. In
addition, damage or performance problems resulting from modifications may
not be covered under NISSAN warranties.
This manual includes information for all features
and equipment available on this model. Features
and equipment in your vehicle may vary depending on model, trim level, options selected, order,
date of production, region or availability. Therefore, you may find information about features or
equipment that are not included or installed on
your vehicle.
All information, specifications and illustrations in
this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications, performance, design or component suppliers without notice and without obligation. From
time to time, NISSAN may update or revise this
manual to provide Owners with the most accurate
information currently available. Please carefully
read and retain with this manual all revision updates sent to you by NISSAN to ensure you have
access to accurate and up-to-date information regarding your vehicle. Current versions of vehicle
Owner’s Manuals and any updates can also be
found in the Owner section of the NISSAN website
at https://owners.nissanusa.com/nowners/
navigation/manualsGuide. If you have questions concerning any information in your Owner’s
Manual, contact NISSAN Consumer Affairs. Refer to NISSAN CUSTOMER CARE PROGRAM
page in this Owner’s Manual for contact information.
IMPORTANT INFORMATION ABOUT
THIS MANUAL
CALIFORNIA PROPOSITION 65
WARNING
You will see various symbols in this manual. They
are used in the following ways:
WARNING
WARNING
This is used to indicate the presence of a
hazard that could cause death or serious
personal injury. To avoid or reduce the
risk, the procedures must be followed
precisely.
CAUTION
This is used to indicate the presence of a
hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.
APD1005
If you see this symbol, it means “Do not do this”
or “Do not let this happen.”
If you see a symbol similar to these in an illustration, it means the arrow points to the front of the
vehicle.
Arrows in an illustration that are similar to these
indicate movement or action.
Arrows in an illustration that are similar to these
call attention to an item in the illustration.
Engine exhaust, some of its constituents,
and certain vehicle components contain or
emit chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles
and certain products of component wear
contain or emit chemicals known to the
State of California to cause cancer and
birth defects or other reproductive harm.
CALIFORNIA PERCHLORATE
ADVISORY
Some vehicle parts, such as lithium batteries, may contain perchlorate material. The
following advisory is provided: “Perchlorate
Material – special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate/”.
BLUETOOTH® is a
trademark owned by
Bluetooth SIG, Inc.
and licensed to
Visteon and Clarion.
SiriusXM® services
require a subscription
after trial period and
are sold separately or
as a package. The
satellite service is
available only in the
48 contiguous USA
and DC. SiriusXM
satellite service is
also available in
Canada; see
www.siriusxm.ca.
© 2015 NISSAN NORTH AMERICA, INC.
All rights reserved. No part of this Owner’s
Manual may be reproduced or stored in a retrieval
system, or transmitted in any form, or by any
means, electronic, mechanical, photocopying,
recording or otherwise, without the prior written
permission of Nissan North America, Inc.
NISSAN CUSTOMER CARE PROGRAM
NISSAN CARES . . .
Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are
our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.
However, if there is something that your NISSAN
dealer cannot assist you with or you would like to
provide NISSAN directly with comments or
questions, please contact the NISSAN Consumer Affairs Department using our toll-free
number:
For U.S. customers
1-800-NISSAN-1
(1-800-647-7261)
For Canadian customers
1-800-387-0122
The Consumer Affairs Department will ask for the
following information:
– Your name, address, and telephone number
– Vehicle identification number (attached to the
top of the instrument panel on the driver’s
side)
– Date of purchase
– Current odometer reading
– Your NISSAN dealer’s name
– Your comments or questions
OR
You can write to NISSAN with the information at:
For U.S. customers
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
or via e-mail at:
nnaconsumeraffairs@nissan-usa.com
For Canadian customers
Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
or via e-mail at:
information.centre@nissancanada.com
If you prefer, visit us at:
www.nissanusa.com (for U.S. customers) or
www.nissan.ca (for Canadian customers)
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
Table of
Contents
Illustrated table of contents
0
Safety—Seats, seat belts and supplemental restraint system
1
Instruments and controls
2
Pre-driving checks and adjustments
3
Monitor, climate, audio, phone and voice recognition systems
4
Starting and driving
5
In case of emergency
6
Appearance and care
7
Maintenance and do-it-yourself
8
Technical and consumer information
9
Index
10
0 Illustrated table of contents
Air bags, seat belts and child restraints . . . . . . . . . . . . . . 0-2
Exterior front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-3
Exterior rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-4
Passenger compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-5
Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-6
Engine compartment check locations . . . . . . . . . . . . . . . . 0-8
Warning/indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-9
AIR BAGS, SEAT BELTS AND CHILD
RESTRAINTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Supplemental front-impact air bags
(P.1-48 )
Occupant classification sensor
(weight sensor) (P. 1-48)
Seat belts (P. 1-17)
Head restraints/headrests (P.1-12)
Roof-mounted curtain side-impact and
rollover supplemental air bag (P. 1-48)
3rd row bench seat top tether strap
anchor (located on bottom of seatback)
(P. 1-26 )
Folding 3rd row bench (P. 1-2)
2nd row seat top tether strap anchor
(located on bottom of seatback)
(P. 1-26)
LATCH (Lower Anchors and Tethers for
CHildren) (P. 1-26)
Folding 2nd row bench (P. 1-2)
Front seat-mounted side-impact
supplemental air bag (P. 1-48)
Seat belts with pretensioner (P. 1-48)
Front seats (P. 1-2)
See the page number indicated in parentheses for operating details.
LII2081
0-2 Illustrated table of contents
EXTERIOR FRONT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Front view camera (if so equipped)
(P. 4-27)
Engine hood (P. 3-22)
Windshield wiper and washer switch,
wiper blades (P. 2-30, 8-19)
Windshield (P. 8-13)
Compass display (if so equipped)
(P. 2-6)
Power windows (P. 2-52)
Door locks, NISSAN Intelligent Key®,
remote engine start (if so equipped),
keys (P. 3-5, 3-2, 3-20)
Mirrors (P. 3-33)
Side view camera (if so equipped)
(P. 4-27)
Tire pressure (P. 8-29)
Flat tire (P. 6-3)
Tire chains (P. 8-29)
Fog light switch (if so equipped)
(P. 2-33)
Replacing bulbs (P. 8-25)
Headlight and turn signal switch
(P. 2-33)
See the page number indicated in parentheses for operating details.
LII2082
Illustrated table of contents 0-3
EXTERIOR REAR
1.
2.
3.
4.
5.
6.
7.
8.
Antenna (P. 4-103)
Rear window wiper and washer switch
(P. 2-30)
Liftgate release (P. 3-23)
Rearview camera (if so equipped)
(P.4-21, 4-27)
Replacing bulbs (P. 8-25)
Fuel-filler cap, recommended fuel
(P. 3-28, 9-2 )
Fuel-filler door (P. 3-28)
Child safety rear door lock (P. 3-5)
See the page number indicated in parentheses for operating details.
LII2214
0-4 Illustrated table of contents
PASSENGER COMPARTMENT
1.
2.
3.
4.
5.
6.
7.
8.
Glove box (P. 2-45)
Map lights (P. 2-59)
Console box (P. 2-45)
Power moonroof (if so equipped)/
panoramic sunshade (if so equipped)
(P. 2-54)
Luggage hooks (P. 2-45)
Cup holders (P. 2-45)
Front seats (P. 1-2)
Sun visors (P. 3-32)
See the page number indicated in parentheses for operating details.
LII2047
Illustrated table of contents 0-5
INSTRUMENT PANEL
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
LIC2383
1.
2.
3.
Vent (P. 4-37)
Headlight/fog light (if so equipped)/turn
signal switch (P. 2-33)
Control panel and Vehicle Information
Display switches (P. 2-18)
0-6 Illustrated table of contents
4.
5.
6.
Instrument brightness control (P. 2-36)
Driver supplemental air bag/Horn
(P. 1-48, P. 2-38)
Meters, gauges, warning/indicator
lights and Vehicle Information Display
(P. 2-3, 2-15, 2-18)
17.
18.
19.
Twin trip odometer reset switch (P. 2-4)
Windshield wiper/washer switch and
rear window wiper/washer switch
(P. 2-30, P. 2-32)
Center display (P. 4-10)/Navigation
system* switches (if so equipped)/
Audio system controls (P. 4-50)
Center display (P. 4-10)/Navigation
system* (if so equipped)
Front passenger supplemental air bag
(P. 1-48)
Glove box (P. 2-45)
Audio system controls (P. 4-50)/
Automatic heater and air conditioning
controls (P. 4-38)
Hazard warning flasher switch (P. 6-2)
Push button ignition switch (P. 5-10)
Cruise control main/set switches
(P. 5-32)
Tilt steering wheel control (P. 3-31)
Bluetooth® Hands-Free Phone System
(P. 4-116, 4-130)
Hood release (P. 3-22)
20.
Vehicle Dynamic Control (VDC) OFF
switch (P. 2-42)
Tow mode switch (P. 2-43)
Liftgate release switch (if so equipped)
(P. 3-23)
Heated steering wheel switch
(if so equipped) (P. 2-41)
Power inverter switch (if so equipped)
(P. 2-42)
Power liftgate main switch
(if so equipped) (P. 3-23)
Blind Spot Warning switch
(if so equipped) (P. 5-19)
Rear Cross Traffic Alert switch
(if so equipped) (P. 5-27)
*: Refer to the separate Navigation System Owner’s Manual (if so equipped).
Refer to the page number indicated in parentheses for operating details.
Illustrated table of contents 0-7
ENGINE COMPARTMENT CHECK
LOCATIONS
VQ35DE engine
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Power steering fluid reservoir (P. 8-12)
Engine coolant reservoir (P. 8-7)
Drive belt location (P.8-17)
Fuse block (P. 8-21)
Engine oil filler cap (P. 8-9)
Brake fluid reservoir (P. 8-13)
Air cleaner (P. 8-18)
Fuse block (P. 8-21)
Fuse/fusible link box (P. 8-21)
Fuse/fusible link box (P. 8-21)
Battery (P. 8-14)
Engine oil dipstick (P. 8-9)
Radiator cap (P. 8-7)
Windshield-washer fluid reservoir
(P. 8-13)
NOTE:
Engine cover removed for clarity.
See the page number indicated in parentheses for operating details.
LDI2498
0-8 Illustrated table of contents
WARNING/INDICATOR LIGHTS
Warning
light
Name
Page
Anti-lock Braking
System (ABS) warning light
Brake warning light
Warning
light
Name
Page
2-11
Low windshieldwasher fluid warning
light
2-14
2-11
Master warning light
2-14
Indicator
light
Name
Page
Continuously Variable Transmission
(CVT) position indicator light
2-15
2-15
Power steering
warning light
2-14
Front fog light indicator light (if so
equipped)
2-15
or
Charge warning
light
2-12
Seat belt warning
light and chime
2-14
Front passenger air
bag status light
2-12
Supplemental air
bag warning light
2-15
High beam indicator
light (blue)
2-15
Engine oil pressure
warning light
2-12
Hill descent control
indicator light (if so
equipped)
2-16
High temperature
warning light
Low fuel warning
light
2-12
Malfunction Indicator Light (MIL)
2-16
Low tire pressure
warning light
2-12
Overdrive off indicator light
2-16
Illustrated table of contents 0-9
Indicator
light
Name
Page
Security indicator
light
2-17
Side light and headlight indicator
(green)
2-17
Slip indicator light
2-17
Tow mode ON indicator light
2-17
Turn signal/hazard
indicator lights
2-17
Vehicle Dynamic
Control (VDC) off
indicator light
2-17
0-10 Illustrated table of contents
1 Safety—Seats, seat belts and
supplemental restraint system
Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Front manual seat adjustment
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Front power seat adjustment
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
2nd row bench seat adjustment . . . . . . . . . . . . . . . . . . 1-7
3rd row bench seat adjustment . . . . . . . . . . . . . . . . . . 1-9
Armrests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Flexible seating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Head restraints/headrests . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
Adjustable head restraint/headrest
components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
Non-adjustable head restraint/headrest
components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13
Remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
Removable (without Dual head restraint/
headrest DVD system only) . . . . . . . . . . . . . . . . . . . . . 1-14
Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Folding head restraint/headrest . . . . . . . . . . . . . . . . . 1-16
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
Precautions on seat belt usage. . . . . . . . . . . . . . . . . . 1-17
Seat belt warning light . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Pregnant women . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Injured persons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Three-point type seat belt with retractor . . . . . . . . . . 1-20
Seat belt extenders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
Seat belt maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
Child safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24
Infants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
Small children . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
Larger children . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
Child restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
Precautions on child restraints . . . . . . . . . . . . . . . . . . 1-26
LATCH (Lower Anchors and Tethers for
CHildren) System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28
Rear-facing child restraint installation using
LATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-32
Rear-facing child restraint installation using
the seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-33
Forward-facing child restraint installation
using LATCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-36
Forward-facing child restraint installation
using the seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-39
Booster seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-45
Supplemental Restraint System (SRS) . . . . . . . . . . . . . . 1-48
Precautions on SRS . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-48
Supplemental air bag warning labels . . . . . . . . . . . . . 1-65
Supplemental air bag warning light . . . . . . . . . . . . . . 1-65
SEATS
● Do not leave children or adults who
would normally require assistance of
others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
others through inadvertent operation of
the vehicle. Also, on hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause
severe or possibly fatal injuries to
people or animals.
ARS1152
WARNING
● Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the lap belt and
receive serious internal injuries.
● For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat with both feet on the floor and
adjust the seat properly. For additional
information, refer to “Precautions on
seat belt usage” in this section.
● After adjustment, gently rock in the seat
to make sure it is securely locked.
● Do not adjust the driver’s seat while
driving so full attention may be given to
vehicle operation. The seat may move
suddenly and could cause loss of control of the vehicle.
● The seatback should not be reclined
any more than needed for comfort. Seat
belts are most effective when the passenger sits well back and straight up in
the seat. If the seatback is reclined, the
risk of sliding under the lap belt and
being injured is increased.
CAUTION
When adjusting the seat positions, be
sure not to contact any moving parts to
avoid possible injuries and/or damage.
1-2 Safety—Seats, seat belts and supplemental restraint system
FRONT MANUAL SEAT
ADJUSTMENT (if so equipped)
Your vehicle seats can be adjusted manually. For
additional information about adjusting the seats,
refer to the steps outlined in this section.
LRS2160
LRS2161
Forward and backward
Reclining
Pull the center of the bar up and hold it while you
slide the seat forward or backward to the desired
position. Release the bar to lock the seat in
position.
To recline the seatback, pull the lever up and lean
back. To bring the seatback forward, pull the lever
up and lean your body forward. Release the lever
to lock the seatback in position.
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. For additional information, refer to “Precautions on seat belt usage” in this section. Also,
the seatback can be reclined to allow occupants
to rest when the vehicle is stopped and the shift
lever is in the P (Park) position.
Safety—Seats, seat belts and supplemental restraint system 1-3
LRS2202
LRS2132
Seat lifter (driver’s seat)
Lumbar support (driver’s seat)
Pull up or push down the adjusting lever to adjust
the seat height until the desired position is
achieved.
The lumbar support feature provides adjustable
lower back support to the driver. Move the lever
up or down to adjust the seat lumbar area.
1-4 Safety—Seats, seat belts and supplemental restraint system
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. For additional information, refer to “Precautions on seat belt usage” in this section. Also,
the seatback can be reclined to allow occupants
to rest when the vehicle is stopped and the shift
lever is in P (Park).
LRS2130
FRONT POWER SEAT ADJUSTMENT
(if so equipped)
Operating tips
● The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds
then reactivate the switch.
● Do not operate the power seat switch for a
long period of time when the engine is off.
This will discharge the battery.
Forward and backward
Moving the switch forward or backward will slide
the seat forward or backward to the desired
position.
Reclining
Move the recline switch backward until the desired angle is obtained. To bring the seatback
forward again, move the switch forward and
move your body forward. The seatback will move
forward.
For additional information, refer to “Automatic
drive positioner” in the “Pre-driving checks and
adjustments” section of this manual.
Safety—Seats, seat belts and supplemental restraint system 1-5
WRS0843
WRS0752
Seat lifter (driver’s seat)
Push the front or rear end of the switch up or
down to adjust the angle and height of the seat
cushion.
Manual (if so equipped)
Lumbar support (driver’s seat)
The lumbar support feature provides adjustable
lower back support to the driver. Move the lever
up or down (manual) or push the front or back
end of the switch (power) to adjust the seat
lumbar area.
1-6 Safety—Seats, seat belts and supplemental restraint system
LRS2270
Power (if so equipped)
The recline feature allows adjustment of the seatback for occupants of different sizes for added
comfort and to help obtain proper seat belt fit. For
additional information, refer to “Precautions on
seat belt usage” in this section. Also, the seatback can be reclined to allow occupants to rest
when the vehicle is stopped and the shift lever is
in P (Park).
WARNING
● After adjustment, gently rock in the seat
to make sure it is securely locked.
LRS2143
Outboard seats
2ND ROW BENCH SEAT
ADJUSTMENT
Forward and backward
1 up and hold it while
Pull the center of the bar 䊊
you slide the seat forward or backward to the
desired position. Release the bar to lock the seat
in position.
Reclining
2
To recline the seatback, pull up on the lever 䊊
and lean back. To bring the seatback forward, pull
2 up and lean your body forward.
the lever 䊊
Release the lever to lock the seatback in position.
● Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the lap belt and
receive serious internal injuries.
● For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat and adjust the seat belt properly.
For additional information, refer to
“Precautions on seat belt usage” in this
section.
LRS2142
One touch walk-in function
The 3rd row can be accessed from outside the
vehicle by using the seatback release lever located on the upper outboard side of the seatback
on the 2nd row bench seat. If a child safety seat is
installed on the passenger’s side of the 2nd row
seat, the 3rd row can be accessed without removing the child safety seat.
Safety—Seats, seat belts and supplemental restraint system 1-7
Multi-mode
WARNING
When returning the seat to its original
position, confirm that the seat and seatback are locked properly.
CAUTION
● Be careful not to pinch your hand or foot
or bump your head when operating the
walk-in seat.
● Do not drive with the 2nd row seat
tipped up.
● Be careful not to allow the 2nd row seat
to pinch, hit any part of your body or
other people when operating the 2nd
row seat. Make sure the seat path is
clear of all objects before moving the
seat.
To enter the 3rd row from outside the vehicle, lift
up on the seatback lever located on the upper
outboard side of the seatback on the 2nd row
bench seat. This will release the back of the seat
and fold up the seat cushion. This will also release the seat tracks so you will be able to slide
the seat forward or backward.
Slide the entire seat forward for access to the 3rd
row.
To return the seat to a locked position, push the
upper seatback rearward until the seatback and
tracks are locked. Push the seat cushion down.
Child seat access mode
The passenger’s side of the 2nd row seat can be
slid forward for easy entry or exit from the 3rd row
bench seat without a child safety seat being
removed.
To enter the 3rd row from outside the vehicle, lift
up on the seatback lever located on the upper
outboard side of the seatback on the 2nd row
bench seat. This will release the seatback. Then
tilt the seat and release the tracks so you will be
able to slide the seat forward or backward.
Slide the entire seat forward for access to the
rear seats.
To return the seat to a locked position, push the
upper seatback rearward until the seatback and
track are locked.
CAUTION
● Be careful not to pinch your hand or foot
or bump your head when operating the
walk-in seat.
● Do not drive with the 2nd row seat
tipped up.
● Be careful not to allow the 2nd row seat
to pinch, hit any part of your body or
other people when operating the 2nd
row seat. Make sure the seat path is
clear of all objects before moving the
seat.
Exiting the 3rd row
To exit the 3rd row from either seating position, lift
the upper seatback release lever to the uppermost position. This will release the back of the
seat, then fold the seat cushion up and release
the tracks.
Slide the entire seat forward.
WARNING
● Do not leave a child in the child safety
seat when operating the child seat access mode.
● When returning the seat to its original
position, confirm that the seat and seatback are locked properly.
1-8 Safety—Seats, seat belts and supplemental restraint system
To return the seat to a locked position, push the
upper seatback rearward until the seatback and
track are locked.
The recline feature allows adjustment of the seatback for occupants of different sizes for added
comfort and to help obtain proper seat belt fit. For
additional information, refer to “Precautions on
seat belt usage” in this section. Also, the seatback can be reclined to allow occupants to rest
when the vehicle is stopped and the shift lever is
in P (Park).
WARNING
When returning the seat to its original
position, confirm that the seat and seatback are locked properly.
CAUTION
Be careful not to pinch your hand or foot
or bump your head when operating the
walk-in seat.
WARNING
● After adjustment, gently rock in the seat
to make sure it is securely locked.
LRS2147
Outboard seats
3RD ROW BENCH SEAT
ADJUSTMENT
Reclining
To recline the seatback, pull up on the latch
located on the outside corner of each seatback.
Lean back until the desired angle is obtained.
To bring the seatback forward again, pull up on
the latch and pull the seatback upright until the
desired angle is obtained.
● Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the lap belt and
receive serious internal injuries.
● For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat and adjust the seat belt properly.
For additional information, refer to
“Precautions on seat belt usage” in this
section.
Safety—Seats, seat belts and supplemental restraint system 1-9
● Do not allow people to ride in any area
of your vehicle that is not equipped with
seats and seat belts. Be sure everyone
in your vehicle is in a seat and using a
seat belt properly.
● Do not allow more than one person to
use the same seat belt.
● Do not fold down the rear seats when
occupants are in the rear seat area or
any luggage is on the rear seats.
– Make sure that the seat path is clear
before moving the seat.
WRS0167
ARMRESTS
The 2nd row bench seat comes equipped with an
armrest. Pull the armrest down until it rests on the
seat cushion.
FLEXIBLE SEATING
WARNING
● Never allow anyone to ride in the cargo
area or on the rear seats when they are
in the fold-down position. In a collision,
people riding in these areas without
proper restraints are more likely to be
seriously injured or killed.
– Be careful not to allow hands or feet
to get caught or pinched in the seat.
● Head restraints/headrests should be
adjusted properly as they may provide
significant protection against injury in
an accident. Always replace and adjust
them properly if they have been removed for any reason.
● If the head restraints/headrests are removed for any reason, they should be
securely stored to prevent them from
causing injury to passengers or damage
to the vehicle in case of sudden braking
or an accident.
1-10 Safety—Seats, seat belts and supplemental restraint system
● When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched position. If they are not completely secured,
passengers may be injured in an accident or sudden stop.
● Properly secure all cargo to help prevent it from sliding or shifting. Do not
place cargo higher than the seatbacks.
In a sudden stop or collision, unsecured
cargo could cause personal injury.
3. Lift up on the recline lever on the side of the
outboard seats to fold the seatbacks flat.
4. To return the 2nd row bench seats to a
seating position, push up on the seatback
until it latches in place.
LRS2144
LRS2145
Folding the 2nd row bench seat
Folding the 3rd row seats
To fold the 2nd row bench seat flat for maximum
cargo hauling:
To fold the 3rd row seats flat for maximum cargo
capacity:
1. Make sure that the head restraints are lowered or removed. To remove the head
restraint/headrest, push and hold the lock
knob
while
moving
the
head
restraint/headrest in an upward direction.
Store the head restraint/headrest properly
so it is not loose in the vehicle.
2. Stow the 2nd row seat belts in the seat belt
hooks found on the sides of the vehicle.
1 to release the head
1. Pull the strap 䊊
restraint/headrest forward.
2. Stow the 3rd row seat belts in the seat belt
4 found on the sides of the cargo
hooks 䊊
area.
2 located in the upper
3. Pull up on the latch 䊊
corner of each seatback and lower the seatback forward over the seat base.
Safety—Seats, seat belts and supplemental restraint system 1-11
HEAD RESTRAINTS/HEADRESTS
To return the 3rd row seats to a seating position:
3 to raise each seat1. Use the pull straps 䊊
back. Pull back until the seatback latches
into position. Make sure to properly raise
each seatback to an upright and secured position.
2. Do not use the pull strap to return the head
restraint/headrest to the upright position.
Pull back on the head restraint/headrest until
it latches in the upright position.
WARNING
When the seat is returned to the normal
seating
position,
the
head
restraints/headrests must be returned to
the upright position to properly protect
vehicle occupants.
WARNING
Head restraints/headrests supplement
the other vehicle safety systems. They may
provide additional protection against injury in certain rear end collisions. Adjustable head restraints/headrests must be
adjusted properly, as specified in this section. Check the adjustment after someone
else uses the seat. Do not attach anything
to the head restraint/headrest stalks or
remove the head restraint/headrest. Do
not use the seat if the head
restraint/headrest has been removed. If
the head restraint/headrest was removed,
reinstall and properly adjust the head
restraint/headrest before an occupant
uses the seating position. Failure to follow these instructions can reduce the effectiveness
of
the
head
restraints/headrests. This may increase
the risk of serious injury or death in a
collision.
LRS2308
The illustration shows the seating positions
equipped with head restraints/headrests.
䉱 Indicates the seating position is equipped with
a head restraint.
䡲 Indicates the seating position is equipped with
a headrest.
+ Indicates the seating position is not equipped
with a head restraint or headrest (if applicable).
● Your vehicle is equipped with a head
restraint/headrest that may be integrated,
adjustable or non-adjustable.
1-12 Safety—Seats, seat belts and supplemental restraint system
● Adjustable head restraints/headrests have
multiple notches along the stalk(s) to lock
them in a desired adjustment position.
● The
non-adjustable
head
restraints/headrests have a single locking
notch to secure them to the seat frame.
● Proper Adjustment:
– For the adjustable type, align the head
restraint/headrest so the center of your
ear is approximately level with the center
of the head restraint/headrest.
– If your ear position is still higher than the
recommended alignment, place the head
restraint/headrest at the highest position.
● If the head restraint/headrest has been removed, ensure that it is reinstalled and
locked in place before riding in that designated seating position.
LRS2300
ADJUSTABLE HEAD RESTRAINT/
HEADREST COMPONENTS
1. Removable head restraint/headrest
LRS2299
NON-ADJUSTABLE HEAD
RESTRAINT/HEADREST
COMPONENTS
2. Multiple notches
1. Removable head restraint/headrest
3. Lock knob
2. Single notch
4. Stalks
3. Lock knob
4. Stalks
Safety—Seats, seat belts and supplemental restraint system 1-13
5. Reinstall and properly adjust the head
restraint/headrest before an occupant uses
the seating position.
LRS2302
REMOVE
Use the following procedure to remove the head
restraint/headrest:
1. Pull the head restraint/headrest up to the
highest position.
2. Push and hold the lock knob.
3. Remove the head restraint/headrest from
the seat.
4. Store the head restraint/headrest properly in
a secure place so it is not loose in the
vehicle.
1-14 Safety—Seats, seat belts and supplemental restraint system
LRS2302
REMOVABLE (without Dual head
restraint/headrest DVD system only)
CAUTION
Do not remove head restraint/headrest
from vehicles equipped with Dual head
restraint/headrest DVD system. Removal
may damage the system wiring.
LRS2303
INSTALL
1. Align the head restraint/headrest stalks with
the holes in the seat. Make sure that the
head restraint/headrest is facing the correct
direction. The stalk with the notch (notches)
1 must be installed in the hole with the lock
䊊
2 .
knob 䊊
WRS0134
LRS2351
ADJUST
For non-adjustable head restraint/headrest
For adjustable head restraint/headrest
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
Adjust the head restraint/headrest so the center
is level with the center of your ears. If your ear
position is still higher than the recommended
alignment, place the head restraint/headrest at
the highest position.
2. Push and hold the lock knob and push the
head restraint/headrest down.
3. Properly adjust the head restraint/headrest
before an occupant uses the seating position.
Safety—Seats, seat belts and supplemental restraint system 1-15
LRS2305
LRS2306
Raise
Lower
To raise the head restraint/headrest, pull it up.
To lower, push and hold the lock knob and push
the head restraint/headrest down.
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
LRS2307
FOLDING HEAD RESTRAINT/
HEADREST
To fold the head restraint/headrest, pull the strap
located on the rear of the head
restraint/headrest.
If the head restraint/headrest has been folded,
make sure that it is returned to the upright position.
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch
before riding in that designated seating position.
1-16 Safety—Seats, seat belts and supplemental restraint system
SEAT BELTS
WARNING
When the seat is returned to the normal
seating
position,
the
head
restraint/headrest must be returned to the
upright position to properly protect vehicle occupants.
SSS0136
PRECAUTIONS ON SEAT BELT
USAGE
If you are wearing your seat belt properly adjusted and you are sitting upright and well back in
your seat with both feet on the floor, your chances
of being injured or killed in a collision and/or the
severity of injury may be greatly reduced.
NISSAN strongly encourages you and all of your
passengers to buckle up every time you drive,
even if your seating position includes a supplemental air bag.
Most U.S. states and Canadian provinces or
territories specify that seat belts be worn at
all times when a vehicle is being driven.
Safety—Seats, seat belts and supplemental restraint system 1-17
SSS0134
WARNING
● Every person who drives or rides in this
vehicle should use a seat belt at all
times. Children should be in the rear
seats and in an appropriate restraint.
1-18 Safety—Seats, seat belts and supplemental restraint system
SSS0016
WARNING
● The seat belt should be properly adjusted to a snug fit. Failure to do so may
reduce the effectiveness of the entire
restraint system and increase the
chance or severity of injury in an accident. Serious injury or death can occur if
the seat belt is not worn properly.
● Be sure the seat belt tongue is securely
fastened to the proper buckle.
● Do not wear the seat belt inside out or
twisted. Doing so may reduce its
effectiveness.
● Do not allow more than one person to
use the same seat belt.
● Never carry more people in the vehicle
than there are seat belts.
SSS0014
WARNING
● Always route the shoulder belt over
your shoulder and across your chest.
Never put the belt behind your back,
under your arm or across your neck. The
belt should be away from your face and
neck, but not falling off your shoulder.
● Position the lap belt as low and snug as
possible AROUND THE HIPS, NOT THE
WAIST. A lap belt worn too high could
increase the risk of internal injuries in
an accident.
● If the seat belt warning light glows continuously while the ignition is turned
ON with all doors closed and all seat
belts fastened, it may indicate a malfunction in the system. Have the system
checked by a NISSAN dealer.
● No changes should be made to the seat
belt system. For example, do not modify
the seat belt, add material, or install
devices that may change the seat belt
routing or tension. Doing so may affect
the operation of the seat belt system.
Modifying or tampering with the seat
belt system may result in serious personal injury.
● Once a seat belt pretensioner has activated, it cannot be reused and must be
replaced together with the retractor.
See a NISSAN dealer.
● Removal and installation of pretensioner system components should be
done by a NISSAN dealer.
● All seat belt assemblies, including retractors and attaching hardware, should
be inspected after any collision by a
NISSAN dealer. NISSAN recommends
that all seat belt assemblies in use during a collision be replaced unless the
collision was minor and the belts show
no damage and continue to operate
properly. Seat belt assemblies not in
use during a collision should also be
inspected and replaced if either damage or improper operation is noted.
● All child restraints and attaching hardware should be inspected after any collision. Always follow the restraint
manufacturer’s inspection instructions
and replacement recommendations.
The child restraints should be replaced
if they are damaged.
Safety—Seats, seat belts and supplemental restraint system 1-19
PREGNANT WOMEN
NISSAN recommends that pregnant women use
seat belts. The seat belt should be worn snug and
always position the lap belt as low as possible
around the hips, not the waist. Place the shoulder
belt over your shoulder and across your chest.
Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific
recommendations.
INJURED PERSONS
LRS0786
SEAT BELT WARNING LIGHT
Both the driver’s and passenger’s front seats are
equipped with a seat belt warning light. The
warning light, located on the instrument panel,
will show the status of the driver and passenger
seat belt.
NOTE:
NISSAN recommends that injured persons use
seat belts. Check with your doctor for specific
recommendations.
THREE-POINT TYPE SEAT BELT
WITH RETRACTOR
WARNING
● Every person who drives or rides in this
vehicle should use a seat belt at all
times.
The front passenger seat belt warning light
will not light up if the seat is not occupied.
For
additional
information,
refer
to
“Warning/indicator lights and audible reminders”
in the “Instruments and controls” section of this
manual.
1-20 Safety—Seats, seat belts and supplemental restraint system
● Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the lap belt and
receive serious internal injuries.
● For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back and
upright in the seat with both feet on the
floor and adjust the seat belt properly.
● Do not allow children to play with the
seat belts. Most seating positions are
equipped with Automatic Locking Retractor (ALR) mode seat belts. If the seat
belt becomes wrapped around a child’s
neck with the ALR mode activated, the
child can be seriously injured or killed if
the seat belt retracts and becomes
tight. This can occur even if the vehicle
is parked. Unbuckle the seat belt to
release the child. If the seat belt cannot
be unbuckled or is already unbuckled,
release the child by cutting the seat belt
with a suitable tool (such as a knife or
scissors) to release the seat belt.
LRS2148
Front seat shown
Fastening the seat belts
1. Adjust the seat. For additional information,
refer to “Seats” in this section.
WRS0137
WRS0138
2. Slowly pull the seat belt out of the retractor
2 until
and insert the tongue into the buckle 䊊
you hear and feel the latch engage.
3. Position the lap belt portion low and snug
3 as shown.
on the hips 䊊
● The retractor is designed to lock during a sudden stop or on impact. A
slow pulling motion permits the seat
belt to move and allows you some
freedom of movement in the seat.
● If the seat belt cannot be pulled from
its fully retracted position, firmly pull
the belt and release it. Then
smoothly pull the belt out of the retractor.
4. Pull the shoulder belt portion toward the
4 . Be sure
retractor to take up extra slack 䊊
the shoulder belt is routed over your shoulder and across your chest.
The front passenger seat and the rear seating
positions three-point seat belts have two modes
of operation:
● Emergency Locking Retractor (ELR)
● Automatic Locking Retractor (ALR)
Safety—Seats, seat belts and supplemental restraint system 1-21
The ELR mode allows the seat belt to extend and
retract to allow the driver and passengers some
freedom of movement in the seat. The ELR locks
the seat belt when the vehicle slows down rapidly
or during certain impacts.
To increase your confidence in the seat belts,
check the operation as follows:
● Grasp the shoulder belt and pull forward
quickly. The retractor should lock and restrict further belt movement.
The ALR mode (child restraint mode) locks the
seat belt for child restraint installation.
If the retractor does not lock during this check or
if you have any questions about seat belt operation, see a NISSAN dealer.
When the ALR mode is activated, the seat belt
cannot be extended again until the seat belt
tongue is detached from the buckle and fully
retracted. The seat belt returns to the ELR mode
after the seat belt fully retracts. For additional
information, refer to “Child restraints” in this section.
The ALR mode should be used only for
child restraint installation. During normal
seat belt use by an occupant, the ALR mode
should not be activated. If it is activated, it
may cause uncomfortable seat belt tension.
WARNING
When fastening the seat belts, be certain
that the seatbacks are completely secured
in the latched position. If they are not
completely secured, passengers may be
injured in an accident or sudden stop.
WRS0139
Unfastening the seat belts
To unfasten the seat belt, press the button on the
1 . The seat belt automatically retracts.
buckle 䊊
Checking seat belt operation
Seat belt retractors are designed to lock seat belt
movement by two separate methods:
● When the seat belt is pulled quickly from the
retractor
● When the vehicle slows down rapidly
1-22 Safety—Seats, seat belts and supplemental restraint system
but not falling off your shoulder. Release the
adjustment button to lock the shoulder belt anchor into position.
WARNING
● After adjustment, release the adjustment button and try to move the shoulder belt anchor up and down to make
sure it is securely fixed in position.
SSS0896
A
䊊
Shoulder belt height adjust button
Shoulder belt height adjustment (front
and rear outboard seats)
The shoulder belt anchor height should be adjusted to the position best for you. For additional
information, refer to “Precautions on seat belt
usage” in this section.
To adjust, push the button and then move the
shoulder belt anchor to the desired position, so
the belt passes over the center of the shoulder.
The belt should be away from your face and neck,
● The shoulder belt anchor height should
be adjusted to the position best for you.
Failure to do so may reduce the effectiveness of the entire restraint system
and increase the chance or severity of
injury in an accident.
● The shoulder belt should rest on the
middle of the shoulder. It must not rest
against the neck.
● Be sure that the seat belt is not twisted
in any way.
● Be sure that the shoulder belt anchor is
secured by trying to move the shoulder
belt anchor up and down after
adjustment.
LRS2157
3rd row shown; 2nd row similar
Seat belt hook
When the seat belt is not in use and when folding
down the rear seats, hook the rear seat belts on
the seat belt hooks.
SEAT BELT EXTENDERS
If, because of body size or driving position, it is
not possible to properly fit the lap/shoulder belt
and fasten it, an extender that is compatible with
the installed seat belts is available for purchase.
The extender adds approximately 8 in (200 mm)
of length and are available for the:
● Driver and front passenger seating position
Safety—Seats, seat belts and supplemental restraint system 1-23
CHILD SAFETY
● 2nd and 3rd row seating position
See a NISSAN dealer for assistance with purchasing an extender if an extender is required.
WARNING
● Only NISSAN seat belt extenders, made
by the same company which made the
original equipment seat belts, should
be used with NISSAN seat belts.
● Adults and children who can use the
standard seat belt should not use an
extender. Such unnecessary use could
result in serious personal injury in the
event of an accident.
● If dirt builds up in the shoulder belt
guide of the seat belt anchors, the seat
belts may retract slowly. Wipe the shoulder
belt guide with a clean, dry cloth.
● Periodically check to see that the seat
belt and the metal components, such as
buckles, tongues, retractors, flexible wires
and anchors, work properly. If loose parts,
deterioration, cuts or other damage on the
webbing is found, the entire seat belt assembly should be replaced.
● Never use seat belt extenders to install
child restraints. If the child restraint is
not secured properly, the child could be
seriously injured in a collision or a sudden stop.
SEAT BELT MAINTENANCE
● To clean the seat belt webbing, apply a
mild soap solution or any solution recommended for cleaning upholstery or carpet.
Then wipe with a cloth and allow the seat
belts to dry in the shade. Do not allow the
seat belts to retract until they are completely
dry.
1-24 Safety—Seats, seat belts and supplemental restraint system
WARNING
Do not allow children to play with the seat
belts. Most seating positions are
equipped with Automatic Locking Retractor (ALR) mode seat belts. If the seat belt
becomes wrapped around a child’s neck
with the ALR mode activated, the child can
be seriously injured or killed if the seat
belt retracts and becomes tight. This can
occur even if the vehicle is parked. Unbuckle the seat belt to release the child. If
the seat belt cannot be unbuckled or is
already unbuckled, release the child by
cutting the seat belt with a suitable tool
(such as a knife or scissors) to release the
seat belt.
Children need adults to help protect them.
They need to be properly restrained.
In addition to the general information in this
manual, child safety information is available from
many other sources, including doctors, teachers,
government traffic safety offices, and community
organizations. Every child is different, so be sure
to learn the best way to transport your child.
There are three basic types of child restraint
systems:
● Rear-facing child restraints
● Forward-facing child restraints
● Booster seats
The proper restraint depends on the child’s size.
Generally, infants up to about 1 year and less
than 20 lbs (9 kg) should be placed in rear-facing
child restraints. Forward-facing child restraints
are available for children who outgrow rearfacing child restraints and are at least 1 year old.
Booster seats are used to help position a vehicle
lap/shoulder belt on a child who can no longer
use a forward-facing child restraint.
WARNING
Infants and children need special protection. The vehicle’s seat belts may not fit
them properly. The shoulder belt may
come too close to the face or neck. The lap
belt may not fit over their small hip bones.
In an accident, an improperly fitting seat
belt could cause serious or fatal injury.
Always use appropriate child restraints.
All U.S. states and Canadian provinces or territories require the use of approved child restraints
for infants and small children. For additional information, refer to “Child restraints” in this section.
A child restraint may be secured in the vehicle by
using either the LATCH (Lower Anchors and
Tethers for CHildren) system or with the vehicle
seat belt. For additional information, refer to
“Child restraints” in this section.
NISSAN recommends that all pre-teens
and children be restrained in the rear seat.
Studies show that children are safer when
properly restrained in the rear seat than in
the front seat.
This is especially important because your
vehicle has a supplemental restraint system
(air bag system) for the front passenger. For
additional information, refer to “Supplemental Restraint System (SRS)” in this section.
INFANTS
Infants up to at least 1 year old should be placed
in a rear-facing child restraint. NISSAN recommends that infants be placed in child restraints
that comply with Federal Motor Vehicle Safety
Standards or Canadian Motor Vehicle Safety
Standards. You should choose a child restraint
that fits your vehicle and always follow the manufacturer’s instructions for installation and use.
SMALL CHILDREN
Children that are over 1 year old and weigh at
least 20 lbs (9 kg) should remain in a rear-facing
child restraint as long as possible up to the height
or weight limit of the child restraint. Children who
outgrow the height or weight limit of the rearfacing child restraint and are at least 1 year old
should be secured in a forward-facing child restraint with a harness. Refer to the manufacturer’s instructions for minimum and maximum
weight and height recommendations. NISSAN
recommends that small children be placed in
child restraints that comply with Federal Motor
Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. You should choose a
child restraint that fits your vehicle and always
follow the manufacturer’s instructions for installation and use.
LARGER CHILDREN
Children should remain in a forward-facing child
restraint with a harness until they reach the maximum height or weight limit allowed by the child
restraint manufacturer.
Once a child outgrows the height or weight limit
of the harness-equipped forward-facing child restraint, NISSAN recommends that the child be
placed in a commercially available booster seat to
obtain proper seat belt fit. For a seat belt to fit
Safety—Seats, seat belts and supplemental restraint system 1-25
CHILD RESTRAINTS
properly, the booster seat should raise the child
so that the shoulder belt is properly positioned
across the chest and the top, middle portion of
the shoulder. The shoulder belt should not cross
the neck or face and should not fall off the shoulder. The lap belt should lie snugly across the
lower hips or upper thighs, not the abdomen. A
booster seat can only be used in seating positions that have a three-point type seat belt. The
booster seat should fit the vehicle seat and have
a label certifying that it complies with Federal
Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. Once the child has
grown so the shoulder belt is no longer on or near
the face and neck and the lap belt can be positioned properly across the lower hips or upper
thighs, use the seat belt without the booster seat.
ARS1098
ARS1098
PRECAUTIONS ON CHILD
RESTRAINTS
WARNING
Never let a child stand or kneel on any seat
and do not allow a child in the cargo area.
The child could be seriously injured or
killed in a sudden stop or collision.
WARNING
● Failure to follow the warnings and instructions for proper use and installation of child restraints could result in
serious injury or death of a child or
other passengers in a sudden stop or
collision:
– The child restraint must be used and
installed properly. Always follow all
of the child restraint manufacturer’s
instructions for installation and use.
1-26 Safety—Seats, seat belts and supplemental restraint system
– NISSAN recommends that all child
restraints be installed in the rear
seat. Studies show that children are
safer when properly restrained in the
rear seat than in the front seat. If you
must install a forward-facing child
restraint in the front seat, refer to
“Forward-facing child restraint installation using the seat belts” in this
section.
WRS0256
– Infants and children should never be
held on anyone’s lap. Even the strongest adult cannot resist the forces of
a collision.
– Do not put a seat belt around both a
child and another passenger.
– Even with the NISSAN Advanced Air
Bag System, never install a rearfacing child restraint in the front seat.
An inflating air bag could seriously
injure or kill a child. A rear-facing
child restraint must only be used in
the rear seat.
– Be sure to purchase a child restraint
that will fit the child and vehicle.
Some child restraints may not fit
properly in your vehicle.
– Child restraint anchorages are designed to withstand only those loads
imposed by correctly fitted child restraints. Under no circumstances are
they to be used to attach adult seat
belts, or other items or equipment to
the vehicle. Doing so could damage
the child restraint anchorages. The
child restraint will not be properly
installed using the damaged anchorage, and a child could be seriously
injured or killed in a collision.
– Never use the anchor points for adult
seat belts or harnesses.
– A child restraint with a top tether
strap should not be used in the front
passenger seat.
– Keep seatbacks as upright as possible after fitting the child restraint.
– Infants and children should always
be placed in an appropriate child restraint while in the vehicle.
● When the child restraint is not in use,
keep it secured with the LATCH system
or a seat belt. In a sudden stop or collision, loose objects can injure occupants
or damage the vehicle.
Safety—Seats, seat belts and supplemental restraint system 1-27
CAUTION
A child restraint in a closed vehicle can
become very hot. Check the seating surface and buckles before placing a child in
the child restraint.
This vehicle is equipped with a universal child
restraint anchor system, referred to as the LATCH
(Lower Anchors and Tethers for CHildren) system. Some child restraints include rigid or
webbing-mounted attachments that can be connected to these anchors. For additional information, refer to “LATCH (Lower Anchors and Tethers for CHildren) system” in this section.
If you do not have a LATCH compatible child
restraint, the vehicle seat belts can be used.
Several manufacturers offer child restraints for
infants and children of various sizes. When selecting any child restraint, keep the following
points in mind:
● Choose only a restraint with a label certifying
that it complies with Federal Motor Vehicle
Safety Standard 213 or Canadian Motor
Vehicle Safety Standard 213.
● Check the child restraint in your vehicle to be
sure it is compatible with the vehicle’s seat
and seat belt system.
● If the child restraint is compatible with your
vehicle, place your child in the child restraint
and check the various adjustments to be
sure the child restraint is compatible with
your child. Choose a child restraint that is
designed for your child’s height and weight.
Always follow all recommended procedures.
● If the combined weight of the child and child
restraint is less than 65 lbs (29.5 kg), you
may use either the LATCH anchors or the
seat belt to install the child restraint (not both
at the same time).
● If the combined weight of the child and child
restraint is greater than 65 lbs (29.5 kg), use
the vehicle’s seat belt (not the lower anchors) to install the child restraint.
LATCH system lower anchor locations bench seat
● Be sure to follow the child restraint manufacturer’s instructions for installation.
LATCH (Lower Anchors and Tethers
for CHildren) SYSTEM
All U.S. states and Canadian provinces or
territories require that infants and small
children be restrained in an approved child
restraint at all times while the vehicle is
being operated. Canadian law requires the
top tether strap on forward-facing child restraints be secured to the designated anchor point on the vehicle.
1-28 Safety—Seats, seat belts and supplemental restraint system
LRS2137
Your vehicle is equipped with special anchor
points that are used with LATCH system compatible child restraints. This system may also be
referred to as the ISOFIX or ISOFIX compatible
system. With this system, you do not have to use
a vehicle seat belt to secure the child restraint
unless the combined weight of the child and child
restraint exceeds 65 lbs (29.5 kg). If the combined weight of the child and child restraint is
greater than 65 lbs (29.5 kg), use the vehicle’s
seat belt (not the lower anchors) to install the
child restraint. Be sure to follow the child restraint
manufacturer’s instructions for installation.
The LATCH lower anchor points are provided to
install child restraints in the following positions
only:
● 2nd row bench seat – outboard seating
positions
LATCH lower anchor
WARNING
Failure to follow the warnings and instructions for proper use and installation of
child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision:
– Attach LATCH system compatible
child restraints only at the locations
shown in the illustration.
– Do not secure a child restraint in the
2nd row center position using the
LATCH system anchors. The child restraint will not be secured properly.
– Inspect the lower anchors by inserting your fingers into the lower anchor
area. Feel to make sure there are no
obstructions over the anchors such
as seat belt webbing or seat cushion
material. The child restraint will not
be secured properly if the lower anchors are obstructed.
– Child restraint anchorages are designed to withstand only those loads
imposed by correctly fitted child restraints. Under no circumstances are
they to be used to attach adult seat
belts, or other items or equipment to
the vehicle. Doing so could damage
the child restraint anchorages. The
child restraint will not be properly
installed using the damaged anchorages, and a child could be seriously
injured or killed in a collision.
WRS0700
LATCH lower anchor location
LATCH lower anchor location
The LATCH lower anchors are located at the rear
of the seat cushion near the seatback. A label is
attached to the seatback to help you locate the
LATCH lower anchors.
Safety—Seats, seat belts and supplemental restraint system 1-29
LRS2146
LATCH label locations 2nd row bench
LRS0661
LATCH webbing-mounted attachment
Installing child restraint LATCH lower
anchor attachments
LATCH compatible child restraints include two
rigid or webbing-mounted attachments that can
be connected to two anchors located at certain
seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to
secure the child restraint. Check your child restraint for a label stating that it is compatible with
LATCH. This information may also be in the instructions provided by the child restraint manufacturer.
1-30 Safety—Seats, seat belts and supplemental restraint system
LRS0662
LATCH rigid-mounted attachment
When installing a child restraint, carefully read
and follow the instructions in this manual and
those supplied with the child restraint.
Top tether anchor
WARNING
● Do not allow cargo to contact the top
tether strap when it is attached to the
top tether anchor. Properly secure the
cargo so it does not contact the top
tether strap. Cargo that is not properly
secured or cargo that contacts the top
tether strap may damage it during a
collision. A child could be seriously injured or killed in a collision if the top
tether strap is damaged.
● Child restraint anchorages are designed to withstand only those loads
imposed by correctly fitted child restraints. Under no circumstances are
they to be used to attach adult seat
belts, or other items or equipment to
the vehicle. Doing so could damage the
child restraint anchorages. The child restraint will not be properly installed using the damaged anchorages, and a
child could be seriously injured or killed
in a collision.
LRS2138
1
䊊
2
䊊
2nd row bench seat
Top tether strap
Anchor point
LRS2508
3rd row bench seat
Top tether anchor point locations
Anchor points are located in the following locations:
● 2nd row bench on the bottom of the seatback in the seating positions shown.
● 3rd row bench on the bottom of the seatback on the passenger side seating position
as shown.
If you have any questions when installing a top
tether strap, consult your NISSAN dealer for details.
Safety—Seats, seat belts and supplemental restraint system 1-31
REAR-FACING CHILD RESTRAINT
INSTALLATION USING LATCH
For additional information, refer to all Warnings
and Cautions in the “Child Safety” and “Child
Restraint” sections of this manual before installing a child restraint.
Do not use the lower anchors if the combined
weight of the child and the child restraint exceeds
65 lbs (29.5 kg). If the combined weight of the
child and the child restraint is greater than 65 lbs,
(29.5 kg) use the vehicle’s seat belt (not the
lower anchors) to install the child restraint. Be
sure to follow the child restraint manufacturer’s
instructions for installation.
Follow these steps to install a rear-facing child
restraint in the 2nd row seats using the LATCH
system:
1. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions.
WRS0801
Rear-facing webbing-mounted – step 2
2. Secure the child restraint anchor attachments to the LATCH lower anchors. Check
to make sure the LATCH attachment is properly attached to the lower anchors.
1-32 Safety—Seats, seat belts and supplemental restraint system
WRS0802
Rear-facing rigid-mounted – step 2
5. Check to make sure the child restraint is
properly secured prior to each use. If the
child restraint is loose, repeat steps 2
through 4.
REAR-FACING CHILD RESTRAINT
INSTALLATION USING THE SEAT
BELTS
WARNING
LRS0673
Rear-facing – step 3
3. For child restraints that are equipped with
webbing-mounted attachments, remove any
additional slack from the anchor attachments. Press downward and rearward firmly
in the center of the child restraint with your
hand to compress the vehicle seat cushion
and seatback while tightening the webbing
of the anchor attachments.
LRS0674
Rear-facing – step 4
4. After attaching the child restraint, test it before you place the child in it. Push it from side
to side while holding the child restraint near
the LATCH attachment path. The child restraint should not move more than 1 inch
(25 mm), from side to side. Try to tug it
forward and check to see if the LATCH attachment holds the restraint in place. If the
restraint is not secure, tighten the LATCH
attachment as necessary, or put the restraint
in another seat and test it again. You may
need to try a different child restraint or try
installing by using the vehicle seat belt (if
applicable). Not all child restraints fit in all
types of vehicles.
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure to
use the ALR mode will result in the child
restraint not being properly secured. The
restraint could tip over or be loose and
cause injury to a child in a sudden stop or
collision. Also, it can change the operation
of the front passenger air bag. For additional information, refer to “Supplemental
air bag warning light” in this section.
For additional information, refer to all Warnings
and Cautions in the “Child safety” and “Child
restraints” sections of this manual before installing a child restraint.
Safety—Seats, seat belts and supplemental restraint system 1-33
Do not use the lower anchors if the combined
weight of the child and the child restraint exceeds
65 lbs (29.5 kg). If the combined weight of the
child and the child restraint is greater than 65 lbs,
(29.5 kg) use the vehicle’s seat belt (not the
lower anchors) to install the child restraint. Be
sure to follow the child restraint manufacturer’s
instructions for installation.
Follow these steps to install a rear-facing child
restraint using the vehicle seat belts in the rear
seats:
WRS0256
Rear-facing – step 1
1. Child restraints for infants must be
used in the rear-facing direction and
therefore must not be used in the front
seat. Position the child restraint on the seat.
Always follow the child restraint manufacturer’s instructions.
1-34 Safety—Seats, seat belts and supplemental restraint system
WRS0761
Rear-facing – step 2
2. Route the seat belt tongue through the child
restraint and insert it into the buckle until you
hear and feel the latch engage. Be sure to
follow the child restraint manufacturer’s instructions for belt routing.
LRS2395
Rear-facing – step 3
3. Pull the shoulder belt until the belt is fully
extended. At this time, the seat belt retractor
is in the ALR mode (child restraint mode). It
reverts to the ELR mode when the seat belt
is fully retracted.
LRS2396
Rear-facing – step 4
4. Allow the seat belt to retract. Pull up on the
shoulder belt to remove any slack in the belt.
WRS0762
Rear-facing – step 5
5. Remove any additional slack from the seat
belt; press downward and rearward firmly in
the center of the child restraint to compress
the vehicle seat cushion and seatback while
pulling up on the seat belt.
Safety—Seats, seat belts and supplemental restraint system 1-35
7. Check to make sure that the child restraint is
properly secured prior to each use. If the
seat belt is not locked, repeat steps 1
through 6.
After the child restraint is removed and the seat
belt fully retracted, the ALR mode (child restraint
mode) is canceled.
FORWARD-FACING CHILD
RESTRAINT INSTALLATION USING
LATCH
LRS2397
Rear-facing – step 6
6. After attaching the child restraint, test it before you place the child in it. Push it from side
to side while holding the child restraint near
the seat belt path. The child restraint should
not move more than 1 inch (25 mm), from
side to side. Try to tug it forward and check
to see if the belt holds the restraint in place.
If the restraint is not secure, tighten the seat
belt as necessary, or put the restraint in
another seat and test it again. You may need
to try a different child restraint. Not all child
restraints fit in all types of vehicles.
For additional information, refer to all Warnings
and Cautions in the “Child Safety” and “Child
Restraints” sections of this manual before installing a child restraint.
Do not use the lower anchors if the combined
weight of the child and the child restraint exceeds
65 lbs (29.5 kg). If the combined weight of the
child and the child restraint is greater than 65 lbs,
(29.5 kg) use the vehicle’s seat belt (not the
lower anchors) to install the child restraint. Be
sure to follow the child restraint manufacturer’s
instructions for installation.
1-36 Safety—Seats, seat belts and supplemental restraint system
Follow these steps to install a forward-facing
child restraint in the 2nd row seats using the
LATCH system:
1. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions.
If the seating position does not have an
adjustable head restraint/headrest and it is
interfering with the proper child restraint fit,
try another seating position or a different
child restraint.
LRS2398
Forward-facing webbing-mounted – step 2
2. Secure the child restraint anchor attachments to the LATCH lower anchors. Check
to make sure the LATCH attachment is properly attached to the lower anchors.
If the child restraint is equipped with a top
tether strap, route the top tether strap and
secure the tether strap to the tether anchor
point. For additional information, refer to “Installing top tether strap” in this section. Do
not install child restraints that require the use
of a top tether strap in seating positions that
do not have a top tether anchor.
LRS2399
Forward-facing rigid-mounted – step 2
3. The back of the child restraint should be
secured against the vehicle seatback.
If necessary, adjust or remove the head
restraint/headrest to obtain the correct child
restraint fit. If the head restraint/headrest is
removed, store it in a secure place. Be sure
to reinstall the head restraint/headrest
when the child restraint is removed. For
additional information, refer to “Head
restraints/headrests” in this section for head
restraint/headrest adjustment information.
Safety—Seats, seat belts and supplemental restraint system 1-37
7. Check to make sure the child restraint is
properly secured prior to each use. If the
child restraint is loose, repeat steps 3
through 6.
LRS0671
Forward-facing – step 4
4. For child restraints that are equipped with
webbing-mounted attachments, remove any
additional slack from the anchor attachments. Press downward and rearward firmly
in the center of the child restraint with your
knee to compress the vehicle seat cushion
and seatback while tightening the webbing
of the anchor attachments.
5. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack.
WRS0697
Forward-facing – step 6
6. After attaching the child restraint, test it before you place the child in it. Push it from side
to side while holding the child restraint near
the LATCH attachment path. The child restraint should not move more than 1 inch
(25 mm), from side to side. Try to tug it
forward and check to see if the LATCH attachment holds the restraint in place. If the
restraint is not secure, tighten the LATCH
attachment as necessary, or put the restraint
in another seat and test it again. You may
need to try a different child restraint. Not all
child restraints fit in all types of vehicles.
1-38 Safety—Seats, seat belts and supplemental restraint system
2nd row bench seat
OUTBOARD SEATING POSITIONS
1. Remove the head restraint/headrest and
store it in a secure place. Be sure to reinstall
the head restraint/headrest when the child
restraint is removed. For additional information, refer to “Head restraints/headrests” in
this section for head restraint/headrest adjustment, removal and installation information.
1 over the
2. Position the top tether strap 䊊
seatback.
LRS2554
1
䊊
2
䊊
2nd row bench seat
Top tether strap
Anchor point
Installing top tether strap
The child restraint top tether strap must be used
when installing the child restraint with the LATCH
lower anchor attachments.
First, secure the child restraint with the LATCH
lower anchors (2nd row bench outboarding seating positions only).
3. Secure the tether strap to the tether anchor
2 on the bottom of the seatback
point 䊊
behind the child restraint.
4. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
WARNING
Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used to attach adult seat belts, or other items or
equipment to the vehicle. Doing so could
damage the child restraint anchorages.
The child restraint will not be properly
installed using the damaged anchorage,
and a child could be seriously injured or
killed in a collision.
FORWARD-FACING CHILD
RESTRAINT INSTALLATION USING
THE SEAT BELTS
WARNING
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure to
use the ALR mode will result in the child
restraint not being properly secured. The
restraint could tip over or be loose and
cause injury to a child in a sudden stop or
collision. Also, it can change the operation
of the front passenger air bag. For additional information, refer to “Front passenger air bag and status light” in this section.
Safety—Seats, seat belts and supplemental restraint system 1-39
Follow these steps to install a forward-facing
child restraint using the vehicle seat belt in the
rear seats or in the front passenger seat:
1. If you must install a child restraint in
the front seat, it should be placed in a
forward-facing direction only. Move
the seat to the rearmost position. Child
restraints for infants must be used in
the rear-facing direction and, therefore, must not be used in the front seat.
2. Position the child restraint on the seat. Always follow the child restraint manufacturer’s instructions.
WRS0699
Forward-facing (front passenger seat) –
step 1
For additional information, refer to all Warnings
and Cautions in the “Child Safety” and “Child
Restraint” sections of this manual before installing a child restraint.
Do not use the lower anchors if the combined
weight of the child and the child restraint exceeds
65 lbs (29.5 kg). If the combined weight of the
child and the child restraint is greater than 65 lbs,
(29.5 kg) use the vehicle’s seat belt (not the
lower anchors) to install the child restraint. Be
sure to follow the child restraint manufacturer’s
instructions for installation.
The back of the child restraint should be
secured against the vehicle seatback.
If necessary, adjust or remove the head
restraint/headrest to obtain the correct child
restraint fit. If the head restraint/headrest is
removed, store it in a secure place. Be sure
to reinstall the head restraint/headrest
when the child restraint is removed. For
additional information, refer to “Head
restraints/headrests” in this section for head
restraint/headrest adjustment, removal and
installation information.
1-40 Safety—Seats, seat belts and supplemental restraint system
If the seating position does not have an
adjustable head restraint/headrest and it is
interfering with the proper child restraint fit,
try another seating position or a different
child restraint.
WRS0680
Forward-facing – step 3
3. Route the seat belt tongue through the child
restraint and insert it into the buckle until you
hear and feel the latch engage. Be sure to
follow the child restraint manufacturer’s instructions for belt routing.
LRS2394
Forward-facing – step 4
4. Pull the shoulder belt until the belt is fully
extended. At this time, the seat belt retractor
is in the ALR mode (child restraint mode). It
reverts to ELR mode when the seat belt is
fully retracted.
LRS0668
Forward-facing – step 5
5. Allow the seat belt to retract. Pull up on the
shoulder belt to remove any slack in the belt.
If the child restraint is equipped with a top
tether strap, route the top tether strap and
secure the tether strap to the tether anchor
point (2nd row installation only). For additional information, refer to “Installing top
tether strap” in this section. Do not install
child restraints that require the use of a top
tether strap in seating positions that do not
have a top tether anchor.
Safety—Seats, seat belts and supplemental restraint system 1-41
9. Check to make sure the child restraint is
properly secured prior to each use. If the
seat belt is not locked, repeat steps 2
through 8.
WRS0681
Forward-facing – step 6
6. Remove any additional slack from the seat
belt; press downward and rearward firmly in
the center of the child restraint with your
knee to compress the vehicle seat cushion
and seatback while pulling up on the seat
belt.
7. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack.
WRS0698
Forward-facing – step 8
8. After attaching the child restraint, test it before you place the child in it. Push it from side
to side while holding the child restraint near
the seat belt path. The child restraint should
not move more than 1 inch (25 mm), from
side to side. Try to tug it forward and check
to see if the belt holds the restraint in place.
If the restraint is not secure, tighten the seat
belt as necessary, or put the restraint in
another seat and test it again. You may need
to try a different child restraint. Not all child
restraints fit in all types of vehicles.
1-42 Safety—Seats, seat belts and supplemental restraint system
2. Secure the tether strap to the tether anchor
2 on the bottom of the seatback
point 䊊
behind the child restraint.
3. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack.
CENTER SEATING POSITION
1 over the
1. Position the top tether strap 䊊
seatback.
LRS0865
Forward-facing – step 10
10. If the child restraint is installed in the front
passenger seat, place the ignition switch in
the ON position. The front passenger air bag
should illuminate. If this
status light
light is not illuminated refer to “Front passenger air bag and status light” in this section.
Move the child restraint to another
seating position. Have the system
checked by a NISSAN dealer.
After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child restraint mode) is canceled.
LRS2553
䊊
2
䊊
1
2nd row bench seat
Top tether strap
Anchor point
Installing top tether strap
The child restraint top tether strap must be used
when installing the child restraint with seat belts.
2. Secure the tether strap to the tether anchor
2 on the bottom of the seatback
point 䊊
behind the child restraint.
3. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack. Make sure the head restraint/headrest
does not contact the top tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
First, secure the child restraint with the seat belt.
2nd row bench seat
OUTBOARD SEATING POSITIONS
1 over the
1. Position the top tether strap 䊊
seatback.
Safety—Seats, seat belts and supplemental restraint system 1-43
The passenger side of the 3rd row bench seat is
the seating position that can use a top tether
strap. First, secure the child restraint with the
seat belt, as applicable.
WARNING
Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used to attach adult seat belts, or other items or
equipment to the vehicle. Doing so could
damage the child restraint anchorages.
The child restraint will not be properly
installed using the damaged anchorage,
and a child could be seriously injured or
killed in a collision.
1 to the out1. Position the top tether strap 䊊
board side of the head restraint/headrest as
shown.
2. Secure the tether strap to the tether anchor
2 on the bottom of the seatback
point 䊊
behind the child restraint.
LRS2508
1
䊊
2
䊊
3rd row bench seat
Top tether strap
Anchor point
3rd row bench seat
WARNING
In the 3rd row bench seat, a child restraint
with a top tether strap can only be used on
the passenger side seating position. Do
not place in the driver’s side seating position and attempt to angle the tether strap
to the passenger side seating position.
1-44 Safety—Seats, seat belts and supplemental restraint system
3. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack. Make sure the head restraint/headrest
does not contact the top tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
WARNING
Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restaints. Under no
circumstances are they to be used to attach adult seat belts, or other items or
equipment to the vehicle. Doing so could
damage the child restraint anchorages.
The child restraint will not be properly
installed using the damaged anchorage,
and a child could be seriously injured or
killed in a collision.
– Make sure the shoulder portion of
the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the stomach.
– Make sure the shoulder belt is not
behind the child or under the child’s
arm.
– A booster seat must only be installed
in a seating position that has a
lap/shoulder belt.
BOOSTER SEATS
For additional information on installing a booster
seat in your vehicle, follow the instructions outlined in this section.
LRS2479
A.
Low back booster seat
B.
High back booster seat
Precautions on booster seats
WARNING
If a booster seat and seat belt are not used
properly, the risk of a child being injured
or killed in a sudden stop or collision
greatly increases:
Safety—Seats, seat belts and supplemental restraint system 1-45
All U.S. states and Canadian provinces or
territories require that infants and small
children be restrained in an approved child
restraint at all times while the vehicle is
being operated.
The instructions in this section apply to booster
seat installation in the rear seats or the front
passenger seat.
Booster seat installation
CAUTION
LRS0453
LRS0464
Booster seats of various sizes are offered by
several manufacturers. When selecting any
booster seat, keep the following points in mind:
● Make sure the child’s head will be properly
supported by the booster seat or vehicle
seat. The seatback must be at or above the
center of the child’s ears. For example, if a
low back booster seat is chosen, the vehicle
seatback must be at or above the center of
the child’s ears. If the seatback is lower than
the center of the child’s ears, a high back
booster seat should be used.
● Choose only a booster seat with a label
certifying that it complies with Federal Motor
Vehicle Safety Standard 213 or Canadian
Motor Vehicle Safety Standard 213.
● Check the booster seat in your vehicle to be
sure it is compatible with the vehicle’s seat
and seat belt system.
● If the booster seat is compatible with your
vehicle, place the child in the booster seat
and check the various adjustments to be
sure the booster seat is compatible with the
child. Always follow all recommended procedures.
1-46 Safety—Seats, seat belts and supplemental restraint system
Do not use the lap/shoulder belt in the
Automatic Locking Retractor (ALR) mode
when using a booster seat with the seat
belts.
For additional information, refer to all Warnings
and Cautions in the “Child safety,” “Child restraints” and “Booster seats” sections of this
manual before installing a child restraint.
Follow these steps to install a booster seat in the
2nd or 3rd rows or in the front passenger seat:
If the seating position does not have an
adjustable head restraint/headrest and it is
interfering with the proper booster seat fit,
try another seating position or a different
booster seat.
4. Position the lap portion of the seat belt low
and snug on the child’s hips. Be sure to
follow the booster seat manufacturer’s instructions for adjusting the seat belt routing.
WRS0699
LRS0454
1. If you must install a booster seat in the
front seat, move the seat to the rearmost position.
Front passenger position
3. The booster seat should be positioned on
the vehicle seat so that it is stable.
2. Position the booster seat on the seat. Only
place it in a front-facing direction. Always
follow the booster seat manufacturer’s instructions.
If necessary, adjust or remove the head
restraint/headrest to obtain the correct
booster
seat
fit.
If
the
head
restraint/headrest is removed, store it in a
secure place. Be sure to reinstall the
head restraint/headrest when the
booster seat is removed. For additional
information,
refer
to
“Head
restraints/headrests” in this section for head
restraint/headrest adjustment, removal and
installation information.
5. Pull the shoulder belt portion of the seat belt
toward the retractor to take up extra slack.
Be sure the shoulder belt is positioned
across the top, middle portion of the child’s
shoulder. Be sure to follow the booster seat
manufacturer’s instructions for adjusting the
seat belt routing.
6. Follow the warnings, cautions and instructions for properly fastening a seat belt
shown in “Three-point type seat belt with
retractor” in this section.
Safety—Seats, seat belts and supplemental restraint system 1-47
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS)
PRECAUTIONS ON SRS
This SRS section contains important information
concerning the following systems:
● Driver and passenger supplemental frontimpact air bag (NISSAN Advanced Air Bag
System)
● Front seat-mounted side-impact supplemental air bag
● Roof-mounted curtain side-impact and rollover supplemental air bag
● Seat belt with pretensioner
LRS0865
Supplemental front-impact air bag system
7. If the booster seat is installed in the front
passenger seat, place the ignition switch in
the ON position. The front passenger air bag
may or may not illuminate,
status light
depending on the size of the child and the
type of booster seat being used. For additional information, refer to “Front passenger
air bag and status light” in this section.
The NISSAN Advanced Air Bag System can help
cushion the impact force to the head and chest of
the driver and front passenger in certain frontal
collisions.
Front seat-mounted side-impact supplemental air bag system
This system can help cushion the impact force to
the chest area of the driver and front passenger in
certain side-impact collisions. The side air bags
are designed to inflate on the side where the
vehicle is impacted.
1-48 Safety—Seats, seat belts and supplemental restraint system
Roof-mounted curtain side-impact and
rollover supplemental air bag system
This system can help cushion the impact force to
the head of occupants in front and rear outboard
seating positions in certain side-impact or rollover collisions. In a side impact, the curtain air
bags are designed to inflate on the side where
the vehicle is impacted. In a rollover, the curtain
air bags are designed to inflate and remain inflated for a short time.
The SRS is designed to supplement the crash
protection provided by the driver and front passenger seat belts and is not a substitute for
them. Seat belts should always be correctly worn
and the occupant seated a suitable distance
away from the steering wheel, instrument panel
and door finishers. For additional information,
refer to “Seat belts” in this section for instructions
and precautions on seat belt usage.
The supplemental air bags operate only
when the ignition switch is placed in the ON
position.
After placing the ignition switch in the ON
position, the supplemental air bag warning
light illuminates. The supplemental air bag
warning light will turn off after about 7 seconds if the system is operational.
● The driver and front passenger seat belt
buckles are equipped with sensors that
detect if the seat belts are fastened. The
Advanced Air Bag System monitors the
severity of a collision and seat belt usage then inflates the air bags as
needed. Failure to properly wear seat
belts can increase the risk or severity of
injury in an accident.
WRS0031
WARNING
● The front air bags ordinarily will not
inflate in the event of a side impact, rear
impact, rollover, or lower severity frontal collision. Always wear your seat
belts to help reduce the risk or severity
of injury in various kinds of accidents.
● The front passenger air bag will not
inflate if the passenger air bag status
light is lit or if the front passenger seat
is unoccupied. For additional information, refer to “Front passenger air bag
and status light” in this section.
● The seat belts and the front air bags are
most effective when you are sitting well
back and upright in the seat. The front
air bags inflate with great force. Even
with the NISSAN Advanced Air Bag System, if you are unrestrained, leaning
forward, sitting sideways or out of position in any way, you are at greater risk of
injury or death in a crash. You may also
receive serious or fatal injuries from the
front air bag if you are up against it
when it inflates. Always sit back against
the seatback and as far away as practical from the steering wheel or instrument panel. Always use the seat belts.
● The front passenger seat is equipped
with an Occupant Classification Sensor
(weight sensor) that turns the front passenger air bag OFF under some conditions. This sensor is only used in this
seat. Failure to be properly seated and
wearing the seat belt can increase the
risk or severity of injury in an accident.
For additional information, refer to
“Front passenger air bag and status
light” in this section.
● Keep hands on the outside of the steering wheel. Placing them inside the
steering wheel rim could increase the
risk that they are injured when the front
air bag inflates.
Safety—Seats, seat belts and supplemental restraint system 1-49
ARS1133
ARS1041
WARNING
● Never let children ride unrestrained or
extend their hands or face out of the
window. Do not attempt to hold them in
your lap or arms. Some examples of
dangerous riding positions are shown
in the illustrations.
1-50 Safety—Seats, seat belts and supplemental restraint system
ARS1042
ARS1043
ARS1044
Safety—Seats, seat belts and supplemental restraint system 1-51
ARS1045
ARS1046
WRS0431
● Children may be severely injured or
killed when the front air bags, side air
bags or curtain air bags inflate if they
are not properly restrained. Pre-teens
and children should be properly restrained in the rear seat, if possible.
Front seat-mounted side-impact supplemental air bags and roof-mounted curtain
side-impact and rollover supplemental air
bags:
WARNING
● Even with the NISSAN Advanced Air
Bag System, never install a rear-facing
child restraint in the front seat. An inflating front air bag could seriously injure or kill your child. For additional
information, refer to “Child restraints”
in this section.
1-52 Safety—Seats, seat belts and supplemental restraint system
WARNING
● The side air bags and curtain air bags
ordinarily will not inflate in the event of
a frontal impact, rear impact, or lower
severity side collision. Always wear
your seat belts to help reduce the risk or
severity of injury in various kinds of
accidents.
WARNING
SSS0162
SSS0159
● The seat belts, the side air bags and
curtain air bags are most effective when
you are sitting well back and upright in
the seat with both feet on the floor. The
side air bag and curtain air bag inflate
with great force. Do not allow anyone to
place their hand, leg or face near the
side air bag on the side of the seatback
of the front seat or near the side roof
rails. Do not allow anyone sitting in the
front seats or rear outboard seats to
extend their hand out of the window or
lean against the door. Some examples
of dangerous riding positions are
shown in the previous illustrations.
Safety—Seats, seat belts and supplemental restraint system 1-53
WRS0032
WARNING
● When sitting in the 2nd row rear seat, do
not hold onto the seatback of the front
seat. If the side air bag inflates, you may
be seriously injured. Be especially careful with children, who should always be
properly restrained. Some examples of
dangerous riding positions are shown
in the illustrations
● Do not use seat covers on the front
seatbacks. They may interfere with side
air bag inflation.
LRS2187
1-54 Safety—Seats, seat belts and supplemental restraint system
NISSAN Advanced Air Bag System
(front seats)
1. Supplemental front-impact air bag modules
2. Air bag Control Unit (ACU)
3. Occupant classification sensor (weight sensor)
4. Front seat-mounted side-impact supplemental air bag modules
5. Roof-mounted curtain side-impact and rollover supplemental air bags
6. Roof-mounted curtain side-impact and rollover supplemental air bag inflators
7. Satellite sensors
8. Seat belt with pretensioner
9. Pressure sensors in door (driver’s side
shown; passenger side similar)
10. Crash zone sensor
WARNING
To ensure proper operation of the passenger’s advanced air bag system, please observe the following items.
● Do not allow a passenger in the 2nd row
to push or pull on the seatback pocket.
● Do not place heavy loads heavier than
2.2 lb (1 kg) on the seatback, head
restraint/headrest or in the seatback
pocket.
● Do not store luggage behind the seat
that can press into the seatback.
● Do not position the front passenger
seat so it contacts the 2nd row. If the
front seat does contact the 2nd row, the
air bag system may determine a sensor
malfunction has occurred and the front
passenger air bag status light may illuminate and the supplemental air bag
warning light may flash.
● If a forward-facing child restraint is installed in the front passenger seat, do
not position the front passenger seat so
the child restraint contacts the instrument panel. If the child restraint does
contact the instrument panel, the system may determine the seat is occupied
and the passenger air bag may deploy
in a collision. Also the front passenger
air bag status light may not illuminate.
For additional information, refer to
“Child restraints” in this section for information about installing and using
child restraints.
● Confirm the operating condition with
the front passenger air bag status light.
● If you notice that the front passenger air
bag status light is not operating as described in this section, please take your
vehicle to your NISSAN dealer to check
the occupant classification system.
● Until you have confirmed with your
dealer that your passenger seat occupant classification system is working
properly, position the occupants in the
rear seating positions.
This vehicle is equipped with the NISSAN Advanced Air Bag System for the driver and front
passenger seats. This system is designed to
meet certification requirements under U.S. regulations. It is also permitted in Canada. All of the
information, cautions and warnings in this
manual must be followed.
The driver supplemental front-impact air bag is
located in the center of the steering wheel. The
passenger supplemental front-impact air bag is
mounted in the dashboard above the glove box.
The front air bags are designed to inflate in higher
severity frontal collisions, although they may inflate if the forces in another type of collision are
similar to those of a higher severity frontal impact.
They may not inflate in certain frontal collisions.
Safety—Seats, seat belts and supplemental restraint system 1-55
Vehicle damage (or lack of it) is not always an
indication of proper front air bag system operation.
The NISSAN Advanced Air Bag System has dual
stage inflators. It also monitors information from
the crash zone sensor and the Air bag Control
Unit (ACU). Inflator operation is based on the
severity of a collision and seat belt usage for the
driver. For the front passenger, the occupant
classification sensor is also monitored. Based on
information from the sensor, only one front air bag
may inflate in a crash, depending on the crash
severity. Additionally, the front passenger air bag
may be automatically turned OFF under some
conditions, depending on the weight detected on
the passenger seat and how the seat belt is used.
If the front passenger air bag is OFF, the passenger air bag status light will be illuminated (if the
seat is unoccupied, the light will not be illuminated, but the air bag will be off). For additional
information, refer to “Front passenger air bag and
status light” in this section. One front air bag
inflating does not indicate improper performance
of the system.
If you have any questions about your air bag
system, please contact NISSAN or your NISSAN
dealer. If you are considering modification of your
vehicle due to a disability, you may also contact
NISSAN. Contact information is contained in the
front of this Owner’s Manual.
When a front air bag inflates, a fairly loud noise
may be heard, followed by the release of smoke.
This smoke is not harmful and does not indicate a
fire. Care should be taken to not inhale it, as it may
cause irritation and choking. Those with a history
of a breathing condition should get fresh air
promptly.
Front air bags, along with the use of seat belts,
help to cushion the impact force on the face and
chest of the front occupants. They can help save
lives and reduce serious injuries. However, an
inflating front air bag may cause facial abrasions
or other injuries. Front air bags do not provide
restraint to the lower body.
Even with NISSAN advanced air bags, seat belts
should be correctly worn and the driver and passenger seated upright as far as practical away
from the steering wheel or instrument panel. The
front air bags inflate quickly in order to help
protect the front occupants. Because of this, the
force of the front air bag inflating can increase the
risk of injury if the occupant is too close to, or is
against, the front air bag module during inflation.
The front air bags deflate quickly after a collision.
The front air bags operate only when the
ignition switch is placed in the ON position.
1-56 Safety—Seats, seat belts and supplemental restraint system
After placing the ignition switch in the ON
position, the supplemental air bag warning
light illuminates. The supplemental air bag
warning light will turn off after about 7 seconds if the system is operational.
LRS0865
Front passenger air bag and status light
WARNING
The front passenger air bag is designed to
automatically turn OFF under some conditions. Read this section carefully to learn
how it operates. Proper use of the seat,
seat belt and child restraints is necessary
for most effective protection. Failure to
follow all instructions in this manual concerning the use of seats, seat belts and
child restraints can increase the risk or
severity of injury in an accident.
Status light
The front passenger seat is equipped with an
Occupant Classification Sensor (weight sensor)
that turns the front passenger air bag on or off
depending on the weight applied to the passenger seat. The status of the passenger air bag (ON
or OFF) is indicated by a passenger air bag
which is located on the instrustatus light
ment panel.
After the ignition switch is placed in the ⬙ON⬙
position, the front passenger air bag status light
on the instrument panel illuminates for about
7 seconds and then turns OFF or remains illuminated depending on the front passenger seat
occupied status. The light operates as follows:
In addition to the above, certain objects placed
on the front passenger seat may also cause the
light to operate as described above depending
on their weight.
For additional information related to the normal
operation and troubleshooting of this Occupant
Classification Sensor system, please refer to
“Normal operation” and “Troubleshooting” in this
section.
Front passenger air bag
● Unoccupied passenger’s seat: The
light is OFF and the front passenger air bag
is OFF and will not inflate in a crash.
The front passenger air bag is designed to automatically turn OFF when the vehicle is operated
under some conditions as described below in
accordance with U.S. regulations. If the front
passenger air bag is OFF it will not inflate in a
crash. The driver air bag and other air bags in your
vehicle are not part of this system.
● Passenger’s seat occupied by a small adult,
child or child restraint as outlined in the
Safety section of the owner’s manual:
light illuminates to indicate that
The
the front passenger air bag is OFF and will
not inflate in a crash.
The purpose of the regulation is to help reduce
the risk of injury or death from an inflating air bag
to certain front passenger seat occupants, such
as children, by requiring the air bag to be automatically turned OFF. Certain sensors are used to
meet the requirements.
● Occupied passenger seat and the passenger meet the conditions as outlined in the
Safety section of the owner’s manual:
light is OFF to indicate that the
The
front passenger air bag is operational.
The occupant classification sensor in this vehicle
is a weight sensor. It is designed to detect an
occupant and objects on the seat by weight. For
example, if a child is in the front passenger seat,
the Advanced Air Bag System is designed to turn
Safety—Seats, seat belts and supplemental restraint system 1-57
the passenger air bag OFF in accordance with
the regulations. Also, if a child restraint of the type
specified in the regulations is on the seat, its
weight and the child’s weight can be detected
and cause the air bag to turn OFF.
Front passenger seat adult occupants who are
properly seated and using the seat belt as outlined
in this manual should not cause the passenger air
bag to be automatically turned OFF. For small
adults it may be turned OFF, however if the occupant takes his/her weight off the seat cushion (for
example, by not sitting upright, by sitting on an
edge of the seat, or by otherwise being out of
position), this could cause the sensor to turn the air
bag OFF. Always be sure to be seated and wearing
the seat belt properly for the most effective protection by the seat belt and supplemental air bag.
NISSAN recommends that pre-teens and children be properly restrained in a rear seat.
NISSAN also recommends that appropriate child
restraints and booster seats be properly installed
in a rear seat. If this is not possible, the occupant
classification sensor is designed to operate as
described above to turn the front passenger air
bag OFF for specified child restraints as required
by the regulations. Failing to properly secure
child restraints and to use the ALR mode may
allow the restraint to tip or move in a collision or
sudden stop. This can also result in the passenger air bag inflating in a crash instead of being
OFF. For additional information, refer to “Child
restraints” in this section for proper use and installation.
If the front passenger seat is not occupied, the
passenger air bag is designed not to inflate in a
crash. However, heavy objects placed on the
seat could result in air bag inflation, because of
the object’s weight detected by the occupant
classification sensor. Other conditions could also
result in air bag inflation, such as if a child is
standing on the seat, or if two children are on the
seat, contrary to the instructions in this manual.
Always be sure that you and all vehicle occupants
are seated and restrained properly.
Using the passenger air bag status light, you can
monitor when the front passenger air bag is automatically turned OFF with the seat occupied.
The light will not illuminate when the front passenger seat is unoccupied.
If an adult occupant is in the seat but the passenger air bag status light is illuminated (indicating
that the air bag is OFF), it could be that the
person is a small adult, or is not sitting on the seat
properly or not using the seat belt properly.
If a child restraint must be used in the front seat,
the passenger air bag status light may or may not
be illuminated, depending on the size of the child
and the type of child restraint being used. If the air
bag status light is not illuminated (indicating that
1-58 Safety—Seats, seat belts and supplemental restraint system
the air bag might inflate in a crash), it could be
that the child restraint or seat belt is not being
used properly. Make sure that the child restraint is
installed properly, the seat belt is used properly
and the occupant is positioned properly. If the air
bag status light is not illuminated, reposition the
occupant or child restraint in a rear seat.
If the passenger air bag status light will not illuminate even though you believe that the child
restraint, the seat belts and the occupant are
properly positioned, the system may be sensing
an unoccupied seat (in which case the air bag is
OFF). Your NISSAN dealer can check that the
system is OFF by using a special tool. However,
until you have confirmed with your dealer that
your air bag is working properly, reposition the
occupant or child restraint in a rear seat.
The air bag system and passenger air bag status
light will take a few seconds to register a change
in the passenger seat status. For example, if a
large adult who is sitting in the front passenger
seat exits the vehicle, the passenger air bag
status light will go from OFF to ON for a few
seconds and then to OFF. This is normal system
operation and does not indicate a malfunction.
If a malfunction occurs in the front passenger air
bag system, the supplemental air bag warning
, located in the meter and gauges area
light
of the instrument panel, will blink. Have the system checked by a NISSAN dealer.
Normal operation
In order for the occupant classification system to
classify the right front passenger based on
weight, please follow the precautions and steps
outlined below:
Precautions
● Make sure there are no objects weighing
over 2.2 lbs (1 kg) hanging on the seat or
placed in the seatback pocket.
● Make sure that a child seat or other object is
not pressing against the rear of the seatback.
● Make sure that a rear passenger is not pushing or pulling on the back of the front passenger’s seat.
● Make sure that the front seat or seatback is
not forced back against an object on the
seat or floor behind it.
● Make sure that there is no object placed
under the front passenger’s seat.
Steps
Troubleshooting
1. Adjust the seat as outlined in the “Seats”
section of the Owner’s Manual. Sit upright,
leaning against the seatback, and centered
on the seat cushion with your feet comfortably extended to the floor.
If you think the front passenger air bag status light
is incorrect:
2. Make sure there are no objects on the occupant’s lap.
This may be due to the following conditions that
may be interfering with the weight sensors:
3. Fasten the seat belt as outlined in the “Seat
belts” section of the Owner’s Manual.
● An object weighing over 2.2 lbs (1 kg) hanging on the seat or placed in the seatback
pocket.
4. Remain in this position for 30 seconds allowing the system to classify the front passenger before the vehicle is put into motion.
5. Ensure proper classification by checking the
front passenger air bag status light.
NOTE:
This vehicle’s occupant classification system locks the classification during driving
so it is important that you confirm that the
front passenger is properly classified prior
to driving. Also, the occupant classification
system may recalculate the weight of the
occupant when the vehicle comes to a stop
(i.e stop light, stop sign etc.), so front passenger seat occupants should continue to
remain seated as outlined above.
1. If the light is ON with no front passenger and
no objects on the front passenger seat:
● A child seat or other object pressing against
the rear of the seatback.
● A rear passenger pushing or pulling on the
back of the front passenger’s seat.
● The front seat or seatback is forced back
against an object on the seat or floor behind
it.
● An object placed under the front passenger’s seat.
● An object placed between the seat cushion
and center console or between door and
cushion.
If the vehicle is moving, please come to a stop
when it is safe to do so. Check and correct any of
the above conditions. Restart the vehicle and
wait one minute.
Safety—Seats, seat belts and supplemental restraint system 1-59
NOTE:
A system check will be performed during
which the front passenger air bag status
light will remain lit for about 7 seconds
initially.
● The front seat or seatback is forced back
against an object on the seat or floor behind
it.
This may be due to the following conditions
that may be interfering with the weight sensors:
● An object placed under the front passenger’s seat.
● Small adult or child is not sitting upright,
leaning against the seatback, and centered
on the seat cushion with feet comfortably
extended to the floor.
If the light is still on after this, the vehicle should
be checked by a NISSAN dealer as soon as
possible.
● An object placed between the seat cushion
and center console or between the seat
cushion and the door.
2. If the light is ON with an adult occupying the
front passenger seat:
If the vehicle is moving, please come to a stop
when it is safe to do so. Check and correct any of
the above conditions. Restart the vehicle and
wait one minute.
● Occupant is a small adult → the air bag light
is functioning as intended. The front passenger air bag is suppressed.
However, if the occupant is not a small adult, then
this may be due to the following conditions that
may be interfering with the weight sensors:
● Occupant is not sitting upright, leaning
against the seatback, and centered on the
seat cushion with feet comfortably extended
to the floor.
● A child seat or other object pressing against
the rear of the seatback.
● A rear passenger pushing or pulling on the
back of the front passenger’s seat.
NOTE:
A system check will be performed during
which the front passenger air bag status
light will remain lit for about 7 seconds
initially.
If the light is still on after this, the person should
be advised not to ride in the front passenger seat
and the vehicle should be checked by a NISSAN
dealer as soon as possible.
3. If the light is OFF with small adult, child or
child restraint occupying the front passenger seat.
1-60 Safety—Seats, seat belts and supplemental restraint system
● The child restraint is not properly installed,
as outlined in the “Child restraints” section of
the Owner’s Manual.
● An object weighing over 2.2 lbs (1 kg) hanging on the seat or placed in the seatback
pocket.
● A child seat or other object pressing against
the rear of the seatback.
● A rear passenger pushing or pulling on the
back of the front passenger’s seat.
● The front seat or seatback is forced back
against an object on the seat or floor behind
it.
● An object placed under the front passenger’s seat.
● An object placed between the seat cushion
and center console.
If the vehicle is moving, please come to a stop
when it is safe to do so. Check and correct any of
the above conditions. Restart the vehicle and
wait one minute.
NOTE:
A system check will be performed during
which the front passenger air bag status
light will remain lit for about 7 seconds
initially.
● Immediately after inflation, several
front air bag system components will be
hot. Do not touch them; you may severely burn yourself.
● No unauthorized changes should be
made to any components or wiring of
the supplemental air bag system. This is
to prevent accidental inflation of the
supplemental air bag or damage to the
supplemental air bag system.
If the light is still OFF after this, the small adult,
child or child restraint should be repositioned in
the rear seat and the vehicle should be checked
by a NISSAN dealer as soon as possible.
● Do not make unauthorized changes to
your vehicle’s electrical system, suspension system or front end structure.
This could affect proper operation of
the front air bag system.
Other supplemental front-impact air bag
precautions
● Tampering with the front air bag system
may result in serious personal injury.
Tampering includes changes to the
steering wheel and the instrument
panel assembly by placing material
over the steering wheel pad and above
the instrument panel or by installing
additional trim material around the air
bag system.
WARNING
● Do not place any objects on the steering
wheel pad or on the instrument panel.
Also, do not place any objects between
any occupant and the steering wheel or
instrument panel. Such objects may become dangerous projectiles and cause
injury if the front air bags inflate.
● Modifying or tampering with the front
passenger seat may result in serious
personal injury. For example, do not
change the front seats by placing material on the seat cushion or by installing
additional trim material, such as seat
covers, on the seat that are not specifically designed to assure proper air bag
operation. Additionally, do not stow any
objects under the front passenger seat
or the seat cushion and seatback. Such
objects may interfere with the proper
operation of the occupant classification
sensor (weight sensor).
● No unauthorized changes should be
made to any components or wiring of
the seat belt system. This may affect the
front air bag system. Tampering with
the seat belt system may result in serious personal injury.
● Removing or modifying the front passenger seat may affect the function of
the air bag and result in serious personal injury.
Safety—Seats, seat belts and supplemental restraint system 1-61
where the vehicle is impacted. They may not
inflate in certain side collisions.
● Work on and around the front air bag
system should be done by a NISSAN
dealer. Installation of electrical equipment should also be done by a NISSAN
dealer. The Supplemental Restraint
System (SRS) wiring harnesses* should
not be modified or disconnected. Unauthorized electrical test equipment and
probing devices should not be used on
the air bag system.
● A cracked windshield should be replaced immediately by a qualified repair
facility. A cracked windshield could affect the function of the supplemental air
bag system.
*The SRS wiring harness connectors are
yellow and orange for easy identification.
When selling your vehicle, we request that you
inform the buyer about the front air bag system
and guide the buyer to the appropriate sections
in this Owner’s Manual.
Curtain air bags are also designed to inflate in
certain types of rollover collisions or near rollovers. As a result, certain vehicle movements (for
example, during severe off-roading) may cause
the curtain air bags to inflate.
Vehicle damage (or lack of it) is not always an
indication of proper side air bag and curtain air
bag operation.
WRS0381
Front seat-mounted side-impact
supplemental air bag and roofmounted curtain side-impact and
rollover supplemental air bag systems
The side air bags are located in the outside of the
seatback of the front seats. The curtain air bags
are located in the side roof rails in all three rows.
All of the information, cautions and warnings in this manual must be followed. The
side air bags and curtain air bags are designed to
inflate in higher severity side collisions, although
they may inflate if the forces in another type of
collision are similar to those of a higher severity
impact. They are designed to inflate on the side
1-62 Safety—Seats, seat belts and supplemental restraint system
When the side air bags and curtain air bags
inflate, a fairly loud noise may be heard, followed
by release of smoke. This smoke is not harmful
and does not indicate a fire. Care should be taken
not to inhale it, as it may cause irritation and
choking. Those with a history of a breathing condition should get fresh air promptly.
Side air bags, along with the use of seat belts,
help to cushion the impact force on the chest of
the front occupants. Curtain air bags help to
cushion the impact force to the head of occupants in the front and rear outboard seating positions in all rows. They can help save lives and
reduce serious injuries. However, an inflating
side air bag or curtain air bag may cause abrasions or other injuries. Side air bags and curtain
air bags do not provide restraint to the lower
body.
The seat belts should be correctly worn and the
driver and passenger seated upright as far as
practical away from the side air bag. Rear seat
passengers should be seated as far away as
practical from the door finishers and side roof
rails. The side air bags and curtain air bags inflate
quickly in order to help protect the occupants.
Because of this, the force of the side air bags and
curtain air bags inflating can increase the risk of
injury if the occupant is too close to, or is against,
these air bag modules during inflation. The side
air bag will deflate quickly after the collision is
over.
WARNING
● Do not place any objects near the seatback of the front seats. Also, do not
place any objects (an umbrella, bag,
etc.) between the front door finisher
and the front seat. Such objects may
become dangerous projectiles and
cause injury if a side air bag inflates.
● Right after inflation, several side air bag
and curtain air bag system components
will be hot. Do not touch them; you may
severely burn yourself.
The side air bags and curtain air bags operate only when the ignition switch is
placed in the ON position.
● No unauthorized changes should be
made to any components or wiring of
the side air bag and curtain air bag
systems. This is to prevent damage to or
accidental inflation of the side air bag
and curtain air bag systems.
After placing the ignition switch in the ON
position, the supplemental air bag warning
light illuminates. The supplemental air bag
warning light will turn off after about 7 seconds if the system is operational.
● Do not make unauthorized changes to
your vehicle’s electrical system, suspension system or side panel. This
could affect proper operation of the curtain air bag systems.
The curtain air bag will remain inflated for a short
time.
● Tampering with the side air bag system
may result in serious personal injury.
For example, do not change the front
seats by placing material near the seatbacks or by installing additional trim
material, such as seat covers, around
the side air bag.
● Work around and on the side air bag
and curtain air bag systems should be
done by a NISSAN dealer. Installation
of electrical equipment should also be
done by a NISSAN dealer. The SRS wiring harnesses* should not be modified
or disconnected. Unauthorized electrical test equipment and probing devices
should not be used on the side air bag
or curtain air bag systems.
* The SRS wiring harness or connectors are
yellow or orange for easy identification.
When selling your vehicle, we request that you
inform the buyer about the side air bags and
curtain air bag system and guide the buyer to the
appropriate sections in this Owner’s Manual.
Safety—Seats, seat belts and supplemental restraint system 1-63
Seat belts with pretensioners (front
seats)
WARNING
● If the vehicle becomes involved in a
collision but a pretensioner is not activated, be sure to have the pretensioner
system checked and, if necessary, replaced by your NISSAN dealer.
● No unauthorized changes should be
made to any components or wiring of
the pretensioner system. This is to prevent damage to or accidental activation
of the pretensioners. Tampering with
the pretensioner system may result in
serious personal injury.
● Work around and on the pretensioner
system should be done by a NISSAN
dealer. Installation of electrical equipment should also be done by a NISSAN
dealer. Unauthorized electrical test
equipment and probing devices should
not be used on the pretensioner system.
● If you need to dispose of a pretensioner
or scrap the vehicle, contact a NISSAN
dealer. Incorrect disposal procedures
could cause personal injury.
The pretensioner system may activate with the
supplemental air bag system in certain types of
collisions. Working with the seat belt retractor,
the pretensioner helps tighten the seat belt when
the vehicle becomes involved in certain types of
collisions, helping to restrain front seat occupants.
The pretensioner is encased with the seat belt
retractor. These seat belts are used the same way
as conventional seat belts.
When a pretensioner activates, smoke is released and a loud noise may be heard. This
smoke is not harmful and does not indicate a fire.
Care should be taken not to inhale it, as it may
cause irritation and choking. Those with a history
of a breathing condition should get fresh air
promptly.
After pretensioner activation, load limiters allow
the seat belt to release webbing (if necessary) to
reduce forces against the chest.
is
The supplemental air bag warning light
used to indicate malfunctions in the pretensioner
system. For additional information, refer to
⬙Supplemental air bag warning light” in this section. If the operation of the supplemental air bag
warning light indicates there is a malfunction,
have the system checked by a NISSAN dealer.
1-64 Safety—Seats, seat belts and supplemental restraint system
When selling your vehicle, we request that you
inform the buyer about the pretensioner system
and guide the buyer to the appropriate sections
in this Owner’s Manual.
If any of the following conditions occur, the front
air bag, side air bag, curtain air bag and pretensioner systems need servicing:
● The supplemental air bag warning light remains on after approximately 7 seconds.
● The supplemental air bag warning light
flashes intermittently.
● The supplemental air bag warning light does
not come on at all.
LRS2158
1. SRS Air Bag Warning Labels
The warning labels are located on the surface of the sun visor.
SUPPLEMENTAL AIR BAG
WARNING LABELS
Warning labels about the supplemental frontimpact air bag system are placed in the vehicle as
shown in the illustration.
LRS0100
SUPPLEMENTAL AIR BAG
WARNING LIGHT
The supplemental air bag warning light,
displaying
in the instrument panel, monitors the circuits for the air bag systems, pretensioners and all related wiring.
When the ignition switch is placed in the ON
position, the supplemental air bag warning light
illuminates for about 7 seconds and then turns
off. This means the system is operational.
Under these conditions, the front air bag, side air
bag, curtain air bag or pretensioner systems may
not operate properly. They must be checked and
repaired. Take your vehicle to the nearest
NISSAN dealer.
WARNING
If the supplemental air bag warning light
is on, it could mean that the front air bag,
side air bag, curtain air bag and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or
others, have your vehicle checked by a
NISSAN dealer as soon as possible.
Safety—Seats, seat belts and supplemental restraint system 1-65
Repair and replacement procedure
The front air bags, side air bags, curtain air bags
and pretensioners are designed to inflate on a
one-time-only basis. As a reminder, unless it is
damaged, the supplemental air bag warning light
remains illuminated after inflation has occurred.
Repair and replacement of these supplemental
air bag systems should be done only by a
NISSAN dealer.
When maintenance work is required on the vehicle, the front air bags, side air bags, curtain air
bags, pretensioners and related parts should be
pointed out to the person performing the maintenance. The ignition switch should always be in
the LOCK position when working under the hood
or inside the vehicle.
● The front air bag, side air bag, curtain
air bag systems and the pretensioner
system should be inspected by a
NISSAN dealer if there is any damage to
the front end or side portion of the
vehicle.
● If you need to dispose of a supplemental air bag or pretensioner or scrap the
vehicle, contact a NISSAN dealer. Incorrect disposal procedures could cause
personal injury.
WARNING
● Once a front air bag, side air bag, or
curtain air bag has inflated, the air bag
module will not function again and
must be replaced. Additionally, the activated pretensioners must also be replaced. The air bag module and pretensioner should be replaced by a NISSAN
dealer. The air bag module and pretensioner cannot be repaired.
1-66 Safety—Seats, seat belts and supplemental restraint system
MEMO
Safety—Seats, seat belts and supplemental restraint system 1-67
2 Instruments and controls
Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Meter and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-4
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Engine coolant temperature gauge . . . . . . . . . . . . . . . 2-5
Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Compass display (if so equipped) . . . . . . . . . . . . . . . . . . . 2-6
Compass display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Warning/indicator lights and audible reminders . . . . . . 2-10
Checking bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15
Audible reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Vehicle Information Display . . . . . . . . . . . . . . . . . . . . . . . . 2-18
How to use the vehicle information display . . . . . . . 2-18
Startup display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Vehicle information display warnings and
indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25
Security systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
Vehicle security system. . . . . . . . . . . . . . . . . . . . . . . . . 2-28
NISSAN vehicle immobilizer system . . . . . . . . . . . . . 2-29
Windshield wiper and washer switch . . . . . . . . . . . . . . . 2-30
Switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31
Rear window wiper and washer switch. . . . . . . . . . . . . . 2-32
Rear window and outside mirror (if so equipped)
defroster switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33
Headlight and turn signal switch. . . . . . . . . . . . . . . . . . . . 2-33
Headlight control switch. . . . . . . . . . . . . . . . . . . . . . . . 2-34
Daytime running light system (Canada only) . . . . . . 2-36
Instrument brightness control . . . . . . . . . . . . . . . . . . . 2-36
Turn signal switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36
Fog light switch (if so equipped) . . . . . . . . . . . . . . . . 2-37
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-38
Heated seats (if so equipped). . . . . . . . . . . . . . . . . . . . . . 2-38
Heated 2nd row seats (if so equipped). . . . . . . . . . . . . . 2-39
Climate controlled seat switch (if so equipped) . . . . . . 2-40
Heated steering wheel (if so equipped) . . . . . . . . . . . . . 2-41
Vehicle Dynamic Control (VDC) off switch . . . . . . . . . . . 2-42
Power inverter switch (if so equipped) . . . . . . . . . . . . . . 2-42
Tow mode switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43
Power outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43
12v outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43
120v outlet (if so equipped) . . . . . . . . . . . . . . . . . . . . 2-45
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
Map pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
Seatback pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46
Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46
Console box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46
Sunglasses holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-47
Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Storage tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-50
Luggage hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-50
Cargo area storage bin. . . . . . . . . . . . . . . . . . . . . . . . . 2-51
Roof rack (if so equipped) . . . . . . . . . . . . . . . . . . . . . . 2-51
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52
Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-52
Moonroof (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 2-54
Power moonroof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-54
Panoramic sunshade (if so equipped) . . . . . . . . . . . . 2-56
Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-58
Console light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-58
Personal lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-59
Map lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-59
Cargo light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-59
HomeLink® universal transceiver (if so equipped) . . . . 2-60
Programming HomeLink® . . . . . . . . . . . . . . . . . . . . . . 2-61
Programming HomeLink® for Canadian
customers and gate openers. . . . . . . . . . . . . . . . . . . . 2-62
Operating the HomeLink® universal
transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-62
Programming trouble-diagnosis . . . . . . . . . . . . . . . . . 2-63
Clearing the programmed information . . . . . . . . . . . . 2-63
Reprogramming a single HomeLink® button. . . . . . 2-63
If your vehicle is stolen . . . . . . . . . . . . . . . . . . . . . . . . . 2-63
INSTRUMENT PANEL
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
LIC2383
1.
2.
3.
Vent (P. 4-37)
Headlight/fog light (if so equipped)/turn
signal switch (P. 2-33)
Control panel and Vehicle Information
Display switches (P. 2-18)
2-2 Instruments and controls
4.
5.
6.
Instrument brightness control (P. 2-36)
Driver supplemental air bag/Horn
(P. 1-48, P. 2-38)
Meters, gauges, warning/indicator
lights and Vehicle Information Display
(P. 2-3, 2-15, 2-18)
17.
18.
19.
Twin trip odometer reset switch (P. 2-4)
Windshield wiper/washer switch and
rear window wiper/washer switch
(P. 2-30, P. 2-32)
Center display (P. 4-10)/Navigation
system* switches (if so equipped)/
Audio system controls (P. 4-50)
Center display (P. 4-10)/Navigation
system* (if so equipped)
Front passenger supplemental air bag
(P. 1-48)
Glove box (P. 2-45)
Audio system controls (P. 4-50)/
Automatic heater and air conditioning
controls (P. 4-38)
Hazard warning flasher switch (P. 6-2)
Push button ignition switch (P. 5-10)
Cruise control main/set switches
(P. 5-32)
Tilt steering wheel control (P. 3-31)
Bluetooth® Hands-Free Phone System
(P. 4-116, 4-130)
Hood release (P. 3-22)
METER AND GAUGES
20.
Vehicle Dynamic Control (VDC) OFF
switch (P. 2-42)
Tow mode switch (P. 2-43)
Liftgate release switch (if so equipped)
(P. 3-23)
Heated steering wheel switch
(if so equipped) (P. 2-41)
Power inverter switch (if so equipped)
(P. 2-42)
Power liftgate main switch
(if so equipped) (P. 3-23)
Blind Spot Warning switch
(if so equipped) (P. 5-19)
Rear Cross Traffic Alert switch
(if so equipped) (P. 5-27)
*: Refer to the separate Navigation System Owner’s Manual (if so equipped).
Refer to the page number indicated in parentheses for operating details.
LIC2254
1.
2.
3.
4.
Tachometer
Warning/indicator lights
Vehicle Information Display
Speedometer
5.
6.
7.
Fuel gauge
Odometer/Twin trip odometer
Engine coolant temperature gauge
Instruments and controls 2-3
The odometer records the total distance the vehicle has been driven.
The twin trip odometer records the distance of
individual trips.
LIC2255
SPEEDOMETER AND ODOMETER
This vehicle is equipped with a speedometer and
odometer. The speedometer is located on the
right side of the meter cluster. The odometer is
located within the Vehicle Information Display.
Speedometer
LIC2234
Changing the display:
3 switch on the right
Pushing the TRIP RESET 䊊
of the instrument panel to change the display as
follows:
Trip
→ Trip
→ Trip
Odometer/Twin trip odometer
Resetting the trip odometer
3 for more
Pushing the TRIP RESET switch 䊊
than 1 second resets the currently displayed trip
odometer to zero.
1 and the twin trip odometer 䊊
2
The odometer 䊊
are displayed below the vehicle information display when the ignition switch is placed in the ON
position.
Average fuel economy and distance to empty
information is also available. For additional information, refer to “Vehicle Information Display” in
this section.
The speedometer indicates vehicle speed.
2-4 Instruments and controls
CAUTION
If the gauge indicates coolant temperature near the hot (H) end of the normal
range, reduce vehicle speed to decrease
temperature. If the gauge is over the normal range, stop the vehicle as soon as
safely possible. If the engine is overheated, continued operation of the vehicle
may seriously damage the engine. For additional information, refer to “If your vehicle overheats” in the “In case of emergency” section of this manual for
immediate action required.
LIC2219
TACHOMETER
The tachometer indicates engine speed in revolutions per minute (rpm). Do not rev engine into
1 .
the red zone 䊊
CAUTION
When engine speed approaches the red
zone, reduce engine speed. Operating the
engine in the red zone may cause serious
engine damage.
LIC2220
ENGINE COOLANT TEMPERATURE
GAUGE
The gauge indicates the engine coolant temperature. The engine coolant temperature is within the
1 when the gauge needle points
normal range 䊊
within the zone shown in the illustration.
The engine coolant temperature varies with the
outside air temperature and driving conditions.
Instruments and controls 2-5
COMPASS DISPLAY (if so equipped)
indicates that the fuel-filler door is
The
located on the driver’s side of the vehicle.
CAUTION
● If the vehicle runs out of fuel, the
Malfunction Indicator Light (MIL) may
come on. Refuel as soon as possible.
light
After a few driving trips. the
should turn off. If the light remains on
after a few driving trips, have the vehicle
inspected by a NISSAN dealer.
LIC2222
FUEL GAUGE
The gauge indicates the approximate fuel level
in the tank.
The gauge may move slightly during braking,
turning, acceleration, or going up or down hills.
The gauge needle returns to 0 (Empty) after the
ignition switch is placed in the OFF position.
The low fuel warning light comes on when the
amount of fuel in the tank is getting low.
Refill the fuel tank before the gauge registers 0 (Empty).
2-6 Instruments and controls
● For additional information, refer to
“Malfunction Indicator Light (MIL)” in
this section.
This unit measures terrestrial magnetism and indicates the heading direction of the vehicle.
With the ignition switch in the ON position, press
or
button as described in the
the
charts below to activate various features of the
automatic anti-glare rearview mirror.
Type A (if so equipped)
Push and hold
the
button for about:
1 second
8 seconds
11 seconds
13 seconds
Feature:
(Push button again for about 1 second to change settings)
Compass display toggles on/off
Automatic anti-glare/indicator light
toggles on/off
Compass zone can be changed to
correct false compass readings
Compass enters calibration mode
Type B (if so equipped)
Push and hold
the
button for about:
1 second
8 seconds
10 seconds
Feature:
(Push button again for about 1 second to change settings)
Compass display toggles on/off
Compass zone can be changed to
correct false compass readings
Compass enters calibration mode
For additional information about the automatic
anti-glare feature, refer to “Automatic anti-glare
rearview mirror” in the “Pre-driving checks and
adjustments” section of this manual.
WIC0904
Type A (if so equipped)
COMPASS DISPLAY
Push the
or
button for about 1 second when the ignition switch is placed in the ON
position to toggle the compass direction display
1 on or off. The display will indicate the direction
䊊
that the vehicle is heading.
N: North
E: East
S: South
W: West
LIC1487
Type B (if so equipped)
You can also calibrate the compass by driving
your vehicle on your everyday route. The compass will be calibrated once it has tracked three
complete circles.
If the display reads “C”, calibrate the compass by
driving the vehicle in three complete circles at
less than 5 MPH (8 km/h).
Instruments and controls 2-7
Zone variation change procedure
The difference between magnetic north and geographical north is known as variance. In some
areas, this difference can sometimes be great
enough to cause false compass readings. Follow
these instructions to set the variance for your
particular location if this happens:
button for about
1. Press and hold the
8 seconds. The current zone number will
appear in the display. Release the button.
2. Find your current location on the zone map.
Refer to the illustration.
button repeatedly to toggle
3. Press the
through the zone numbers until the desired
number appears in the display. Once you
have selected a zone number, the display
will show a compass direction within a few
seconds.
Inaccurate compass direction
The compass display is equipped with automatic
correction function. If the correct direction is not
shown, follow this procedure.
1. With the display turned on, press and hold
for about 10 seconds. The “C”
the
icon in the compass display will illuminate.
WIC0355
2-8 Instruments and controls
2. Calibrate the compass by driving the vehicle
in three complete circles at a maximum
speed of 5 MPH (8 km/h).
3. After completing the circles, the display
should return to normal.
CAUTION
● Do not install a ski rack, antenna, etc.,
which are attached to the vehicle by
means of a magnet. They affect the operation of the compass.
● When cleaning the mirror, use a paper
towel or similar material dampened
with glass cleaner. Do not spray glass
cleaner directly on the mirror as it may
cause the liquid cleaner to enter the
mirror housing.
Instruments and controls 2-9
WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS
Anti-lock Braking System (ABS) warning light
Power steering warning light
Overdrive OFF indicator light
or
Seat belt warning light and chime
Security indicator light
Charge warning light
Supplemental air bag warning light
Side light and headlight indicator light (green)
Engine oil pressure warning light
Continuously Variable Transmission (CVT)
position indicator light
Slip indicator light
High temperature warning light
Front fog light indicator light (if so equipped)
Tow mode ON indicator light
Low fuel warning light
Front passenger air bag status light
Turn signal/hazard indicator lights
Low tire pressure warning light
High beam indicator light (blue)
Vehicle Dynamic Control (VDC) off indicator
light
Low windshield-washer fluid warning light
Hill descent control indicator light
(if so equipped)
Master warning light
Malfunction Indicator Light (MIL)
Brake warning light
2-10 Instruments and controls
CHECKING BULBS
With all doors closed, apply the parking brake
and place the ignition switch to the ON position
without starting the engine. The following lights
will come on:
,
or
,
,
,
The following lights come on briefly and then go
off:
,
,
,
,
,
If any light fails to come on, it may indicate
a burned-out bulb or an open circuit in the
electrical system. Have the system repaired
promptly.
WARNING LIGHTS
For additional information, refer to “Vehicle information display” in this section.
Anti-lock Braking System
(ABS) warning light
When the ignition switch is placed in the ON
position, the ABS warning light illuminates and
then turns off. This indicates the ABS is operational.
If the ABS light comes on while the engine is
running, it may indicate the anti-lock braking sys-
tem is not functioning properly. Have the system
checked by a NISSAN dealer.
If an ABS malfunction occurs, the anti-lock function is turned off. The brake system then operates
normally, but without anti-lock assistance. For
additional information, refer to “Brake system” in
the “Starting and driving” section of this manual.
or
Brake warning light
This light functions for both the parking brake and
the foot brake systems.
Parking brake indicator
When the ignition switch is placed in the ON
position, the light comes on when the parking
brake is applied.
Low brake fluid warning light
When the ignition switch is placed in the ON
position, the light warns of a low brake fluid level.
If the light comes on while the engine is running
with the parking brake not applied, stop the vehicle and perform the following:
1. Check the brake fluid level. Add brake fluid
as necessary. For additional information, refer to “Brake fluid” in the “Maintenance and
do-it-yourself” section of this manual.
2. If the brake fluid level is correct, have the
warning system checked by a NISSAN
dealer.
WARNING
● Your brake system may not be working
properly if the warning light is on. Driving could be dangerous. If you judge it
to be safe, drive carefully to the nearest
service station for repairs. Otherwise,
have your vehicle towed.
● Pressing the brake pedal with the engine stopped and/or a low brake fluid
level may increase your stopping distance and braking will require greater
pedal effort as well as pedal travel.
● If the brake fluid
MINIMUM or MIN
fluid reservoir, do
brake system has
NISSAN dealer.
level is below the
mark on the brake
not drive until the
been checked at a
Anti-lock Braking System (ABS) warning
indicator
When the parking brake is released and the
brake fluid level is sufficient, if both the brake
warning light and the ABS warning light illuminates, it may indicate the ABS is not functioning
properly. Have the brake system checked and, if
Instruments and controls 2-11
necessary, repaired by a NISSAN dealer
promptly. Avoid high-speed driving and abrupt
braking. For additional information, refer to “Antilock Braking System (ABS) warning light” in this
section.
Charge warning light
If this light comes on while the engine is running,
it may indicate the charging system is not functioning properly. Turn the engine off and check
the generator belt. If the belt is loose, broken,
missing, or if the light remains on, see a NISSAN
dealer immediately.
CAUTION
Engine oil pressure warning
light
This light warns of low engine oil pressure. If the
light flickers or comes on during normal driving,
pull off the road in a safe area, stop the engine
immediately, and call a NISSAN dealer or other
authorized repair shop.
The engine oil pressure warning light is not
designed to indicate a low oil level. Use the
dipstick to check the oil level. For additional information, refer to “Engine oil” in the “Maintenance and do-it-yourself” section of this manual.
CAUTION
● Do not ground electrical accessories directly to the battery terminal. Doing so
will bypass the variable control system
and the vehicle battery may not charge
completely. For additional information,
refer to “Variable voltage control system” in the “Maintenance and do-ityourself” section of this manual.
Running the engine with the engine oil
pressure warning light on could cause serious damage to the engine almost immediately. Such damage is not covered by
warranty. Turn off the engine as soon as it
is safe to do so.
● Do not continue driving if the generator
belt is loose, broken or missing
When the ignition switch is placed in the ON
position, the high temperature warning light illuminates and then turns off. This indicates that the
high temperature sensor in the engine coolant
system is operational.
2-12 Instruments and controls
High temperature warning light
CAUTION
If the high temperature warning light illuminates while the engine is running, it
may indicate the engine temperature is
extremely high. Stop the vehicle safely as
soon as possible. If the vehicle is overheated, continuing vehicle operation may
seriously damage the engine. For additional information, refer to “If your vehicle
overheats” in the “In case of emergency”
section.
Low fuel warning light
This light comes on when the fuel level in the fuel
tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches 0
(Empty). There will be a small reserve of fuel
in the tank when the fuel gauge reaches 0
(Empty).
Low tire pressure warning light
Your vehicle is equipped with a Tire Pressure
Monitoring System (TPMS) that monitors the tire
pressure of all tires except the spare.
The low tire pressure warning light warns of low
tire pressure or indicates that the TPMS is not
functioning properly.
After the ignition switch is placed in the ON
position, this light illuminates for about 1 second
and turns off.
Low tire pressure warning:
If the vehicle is being driven with low tire
pressure, the warning light will illuminate.
A “Tire Press Low - Add Air” warning also
appears in the vehicle information display.
When the low tire pressure warning light
illuminates, you should stop and adjust the
tire pressure of all four tires to the recommended COLD tire pressure shown on the
Tire and Loading Information label located
in the driver’s door opening. The low tire
pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, the vehicle must be
driven at speeds above 16 MPH (25 km/h)
to activate the TPMS and turn off the low
tire pressure warning light. Use a tire pressure gauge to check the tire pressure.
The “Tire Press Low - Add Air” warning appears
each time the ignition switch is placed in the ON
position as long as the low tire pressure warning
light remains illuminated.
For additional information, refer to “Vehicle information display” in the “Instruments and controls”
section and “Tire Pressure Monitoring System
(TPMS)” in the “Starting and driving” section and
in the “In case of emergency” section of this
mannual.
● If the light does not illuminate with the
ignition switch placed in the ON position, have the vehicle checked by a
NISSAN dealer as soon as possible.
TPMS malfunction:
● If the light illuminates while driving,
avoid sudden steering maneuvers or
abrupt braking, reduce vehicle speed,
pull off the road to a safe location and
stop the vehicle as soon as possible.
Driving with under-inflated tires may
permanently damage the tires and increase the likelihood of tire failure. Serious vehicle damage could occur and
may lead to an accident and could result
in serious personal injury. Check the
tire pressure for all four tires. Adjust the
tire pressure to the recommended
COLD tire pressure shown on the Tire
and Loading Information label located
in the driver’s door opening to turn the
low tire pressure warning light OFF. If
the light still illuminates while driving
after adjusting the tire pressure, a tire
may be flat. If you have a flat tire, replace it with a spare tire as soon as
possible.
If the TPMS is not functioning properly, the low
tire pressure warning light will flash for approximately 1 minute when the ignition switch is
placed in the ON position. The light will remain on
after the 1 minute. Have the system checked by a
NISSAN dealer. The “Tire Pressure Low - Add
Air” warning does not appear if the low tire pressure warning light illuminates to indicate a TPMS
malfunction.
For additional information, refer to “Tire Pressure
Monitoring System (TPMS)” in the “Starting and
driving” section and “Tire pressure” in the “Maintenance and do-it-yourself” section of this
manual.
WARNING
● Radio waves could adversely affect
electric medical equipment. Those who
use a pacemaker should contact the
electric medical equipment manufacturer for the possible influences before
use.
Instruments and controls 2-13
● When a spare tire is mounted or a wheel
is replaced tire pressure will not be indicated, the TPMS will not function and
the low tire pressure warning light will
flash for approximately 1 minute. The
light will remain on after 1 minute. Contact your NISSAN dealer as soon as
possible for tire replacement and/or
system resetting.
● Replacing tires with those not originally
specified by NISSAN could affect the
proper operation of the TPMS.
refer to “Windshield-washer fluid” in the “Maintenance and do-it-yourself” section of this manual.
Master warning light
When the ignition switch is in the ON position,
the master warning light illuminates if any of the
following are displayed on the vehicle information
display:
● No key warning
● Low fuel warning
● Low washer fluid warning
CAUTION
● The TPMS is not a substitute for the
regular tire pressure check. Be sure to
check the tire pressure regularly.
● If the vehicle is being driven at speeds
of less than 16 MPH (25 km/h), the
TPMS may not operate correctly.
● Be sure to install the specified size of
tires to the 4 wheels correctly.
Low windshield-washer fluid
warning light
This light comes on when the windshield-washer
fluid is at a low level. Add windshield-washer
fluid, as necessary. For additional information,
2-14 Instruments and controls
● Parking brake release warning
● Door open warning
● Loose fuel cap warning
● Check tire pressure warning
For additional information, refer to “Vehicle Information Display” in this section.
Power steering warning light
WARNING
● If the engine is not running or is turned
off while driving, the power assist for
the steering will not work. Steering will
be harder to operate.
● When the power steering warning light
illuminates with the engine running,
there will be no power assist for the
steering. You will still have control of the
vehicle, but the steering will be much
harder to operate. Have the power steering system checked by a NISSAN dealer.
When the ignition switch is in the ON position,
the power steering warning light illuminates. After
starting the engine, the power steering warning
light turns off. This indicates that the electric
power steering system is operational. If the
power steering warning light illuminates while the
engine is running, it may indicate the power
steering system is not functioning properly and
may need servicing. Have the hydraulic pump
electric power steering system checked by a
NISSAN dealer. For additional information, refer
to “Power steering” in the “Starting and driving”
section of this manual.
Seat belt warning light and
chime
The light and chime remind you to fasten your
seat belts. The light illuminates whenever the
ignition switch is placed in the ON or START
position and remains illuminated until the driver’s
seat belt is fastened. At the same time, the chime
sounds for about 6 seconds unless the driver’s
seat belt is securely fastened.
The seat belt warning light may also illuminate if
the front passenger’s seat belt is not fastened
when the front passenger’s seat is occupied . For
7 seconds after the ignition switch is placed in
the ON position, the system does not activate the
warning light for the front passenger.
For additional information, refer to “Seat belts” in
the “Safety—Seats, seat belts and supplemental
restraint system” section of this manual.
Supplemental air bag warning
light
When the ignition switch is placed in the ON or
START position, the supplemental air bag warning light illuminates for about 7 seconds and then
turns off. This means the system is operational.
If any of the following conditions occur, the front
air bag, side air bag, curtain air bag, and pretensioner systems need servicing and your vehicle
must be taken to a NISSAN dealer:
● The supplemental air bag warning light remains on after approximately 7 seconds.
● The supplemental air bag warning light
flashes intermittently.
● The supplemental air bag warning light does
not come on at all.
Unless checked and repaired, the supplemental
restraint system (air bag system) and/or the seat
belts with pretensioner system may not function
properly. For additional information, refer to
“Supplemental restraint system (SRS)” in the
“Safety—Seats, seat belts and supplemental restraint system” section of this manual.
WARNING
If the supplemental air bag warning light
is on, it could mean that the front air bag,
side air bag, curtain air bag and/or pretensioner systems will not operate in an accident. To help avoid injury to yourself or
others, have your vehicle checked by a
NISSAN dealer as soon as possible.
INDICATOR LIGHTS
For additional information, refer to “Vehicle information display” in this section.
Continuously Variable
Transmission (CVT) position
indicator light
When the ignition switch is placed in the ON
position, this indicator light shows the shift lever
position. For additional information, refer to “Driving the vehicle” in the “Starting and driving” section of this manual.
Front fog light indicator light (if
so equipped)
The front fog light indicator light illuminates when
the front fog lights are ON. For additional information, refer to “Fog light switch” in this section.
Front passenger air bag status
light
The front passenger air bag status light will be lit
and the passenger front air bag will be OFF
depending on how the front passenger seat is
being used.
For additional information, refer to “Front passenger air bag and status light” in the “Safety —
Seats, seat belts and supplemental restraint system” section of this manual.
High beam indicator light
(blue)
This blue light comes on when the headlight high
beams are on and goes out when the low beams
are selected.
The high beam indicator light also comes on
when the passing signal is activated.
Instruments and controls 2-15
Hill descent control system on
indicator light (if so equipped)
When the ignition switch is placed in the ON
position, this light comes on briefly and then turns
off.
The light comes on when the hill descent control
system is activated.
If the hill descent control switch is on and the
indicator light blinks, the system is not engaged.
If the indicator light does not come on when the
hill descent switch is on, the system may not be
functioning properly. Have the system checked
by a NISSAN dealer.
For additional information, refer to “Hill descent
control system on indicator light” in this section
and “Hill descent control system” in the “Starting
and driving” section of this manual.
Malfunction Indicator Light
(MIL)
If this indicator light comes on steady or blinks
while the engine is running, it may indicate a
potential emission control malfunction.
The MIL may also come on steady if the fuel-filler
cap is loose or missing, or if the vehicle runs out
of fuel. Check to make sure the fuel-filler cap is
2-16 Instruments and controls
installed and closed tightly, and that the vehicle
has at least 3 gallons (11.4 liters) of fuel in the
fuel tank.
light should
After a few driving trips, the
turn off if no other potential emission control
system malfunction exists.
If this indicator light comes on steady for 20 seconds and then blinks for 10 seconds when the
engine is not running, it indicates that the vehicle is
not ready for an emission control system
inspection/maintenance test. For additional information,
refer
to
“Readiness
for
inspection/maintenance (I/M) test” in the “Technical
and consumer information” section of this manual.
Operation
The MIL will come on in one of two ways:
● MIL on steady — An emission control system
malfunction has been detected. Check the
fuel-filler cap if the LOOSE FUEL CAP
warning appears in the vehicle information
display. If the fuel-filler cap is loose or missing, tighten or install the cap and continue to
light should turn
drive the vehicle. The
off after a few driving trips. If the
light
does not turn off after a few driving trips,
have the vehicle inspected by a NISSAN
dealer. You do not need to have your vehicle
towed to the dealer.
● MIL blinking — An engine misfire has been
detected which may damage the emission
control system. To reduce or avoid emission
control system damage:
– do not drive at speeds above 45 MPH
(72 km/h).
– avoid hard acceleration or deceleration.
– avoid steep uphill grades.
– if possible, reduce the amount of cargo
being hauled or towed.
The MIL may stop blinking and come on steady.
Have the vehicle inspected by a NISSAN dealer.
You do not need to have your vehicle towed to the
dealer.
CAUTION
Continued vehicle operation without having the emission control system checked
and repaired as necessary could lead to
poor driveability, reduced fuel economy,
and possible damage to the emission control system.
Overdrive OFF indicator light
The overdrive off indicator light illuminates when
the overdrive off mode is selected.
For additional information, refer to “Continuously
Variable Transmission (CVT)” in the “Starting and
driving” section of this manual.
Security indicator light
This light blinks when the ignition switch is
placed in the OFF, LOCK or ACC position.
The blinking security indicator light indicates that
the security systems equipped on the vehicle are
operational.
For additional information, refer to “Security systems” in this section.
Side light and headlight
indicator light (green)
The side light and headlight indicator light illuminates when the side light or headlight position is
selected. For additional information, refer to
“Headlight and turn signal switch” in this section.
Slip indicator light
This indicator will blink when the VDC system is
operating, thus alerting the driver to the fact that
the road surface is slippery and the vehicle is
nearing its traction limits.
The light will blink for a few seconds after the
VDC system stops limiting wheel spin.
indicator light also comes on when
The
you place the ignition switch in the ON position.
The light will turn off after approximately 2 seconds if the system is operational. If the light does
not come on have the system checked by a
NISSAN dealer.
Tow mode ON indicator light
This light comes on when the tow mode function
is ON.
Turn signal/hazard indicator
lights
Push the VDC off switch again or restart the
engine and the system will operate normally. For
additional information, refer to “Vehicle Dynamic
Control (VDC) system” in the “Starting and driving” section of this manual.
The VDC light also comes on when you place the
ignition switch in the ON position. The light will
turn off after about 2 seconds if the system is
operational. If the light stays on or comes on
indicator light while you are
along with the
driving, have the VDC system checked by a
NISSAN dealer.
While the VDC system is operating, you might
feel slight vibration or hear the system working
when starting the vehicle or accelerating, but this
is normal.
The appropriate light flashes when the turn signal
switch is activated.
AUDIBLE REMINDERS
Both lights flash when the hazard switch is turned
on.
Brake pad wear warning
Vehicle Dynamic Control
(VDC) OFF indicator light
This indicator light comes on when the VDC off
switch is pushed to OFF. This indicates the VDC
system is not operating.
The disc brake pads have audible wear warnings.
When a disc brake pad requires replacement, it
makes a high pitched scraping sound when the
vehicle is in motion, whether or not the brake
pedal is depressed. Have the brakes checked as
soon as possible if the warning sound is heard.
You may feel or hear the system working; this is
normal.
Instruments and controls 2-17
VEHICLE INFORMATION DISPLAY
Key reminder chime
A chime sounds if the driver’s door is opened
while the ignition switch is placed in the ACC or
OFF position or placed in the OFF or LOCK
position with the Intelligent Key left in the vehicle.
Make sure the ignition switch is placed in the
LOCK position, and take the Intelligent Key with
you when leaving the vehicle.
Light reminder chime
With the ignition switch placed in the OFF position, a chime sounds when the driver’s door is
opened if the headlights or parking lights are on.
Turn the headlight control switch off before leaving the vehicle.
NISSAN Intelligent Key® door buzzer
The Intelligent Key door buzzer sounds if the
Intelligent Key is left inside the vehicle when
locking the doors. When the buzzer sounds, be
sure to check both the vehicle and the Intelligent
Key. For additional information, refer to “NISSAN
Intelligent Key®” in the “Pre-driving checks and
adjustments” section of this manual.
LIC2205
The vehicle information display is located to the
left of the speedometer. It displays such items as:
● Vehicle settings
● Trip computer information
● Drive system warnings and settings (if so
equipped)
● Cruise control system information
The vehicle information display can be changed
and ENTER located on
using the buttons
the steering wheel.
1.
— select/enter the Vehicle information menu items or to change from one display screen to the next (i.e. trip, TPMS, Fuel
economy)
2.
— navigate through the items in vehicle information
ENTER — change or select an item in the
vehicle information display
● NISSAN Intelligent Key® operation information
● Indicators and warnings
● Tire Pressure information
2-18 Instruments and controls
LIC2245
HOW TO USE THE VEHICLE
INFORMATION DISPLAY
3.
— go back to the previous menu
buttons also control audio
The ENTER and
and control panel functions. For additional information, refer to “Steering wheel switch for audio
control” in the “Monitor, climate, audio, phone
and voice recognition systems” section of this
manual.
STARTUP DISPLAY
When the vehicle in placed in the ON or ACC
position the screens that display in the vehicle
information include:
● Active system status (if so equipped)
● Trip computer
● Tire pressure information
● 4 x 4 (if so equipped)
● Fuel economy
● Warnings
Warnings will only display if there are any present. For additional information on warnings and
indicators refer to “Vehicle information display
warnings and indicators” in this section.
To control what items display in the vehicle information display, refer to “Main menu selection” in
this section.
SETTINGS
Vehicle Settings
The setting mode allows you to change the information displayed in the vehicle information display:
The vehicle settings allows the customer to change
settings for interior lights, Intelligent Key settings,
unlock settings and other vehicle settings.
● Driver Assistance (if so equipped)
● Vehicle Settings
The vehicle settings can be changed using
,
, and the ENTER buttons.
the
● Maintenance
Welcome light (if so equipped)
The welcome light can be set to be ON or OFF.
From the Vehicle Settings menu, select “Welcome Light”. Use the ENTER button to turn this
feature ON or OFF.
● Alarms
Auto Room Lamp
● Main Menu Selection
● Body Color
● Language
● Welcome Effects
The interior lights can be set to be ON or OFF if
any door is unlocked. From the Vehicle Settings
menu, select “Auto Room Light”. Use the ENTER
button to turn this feature ON or OFF.
● Factory Reset
Light Sensitivity (if so equipped)
● Unit
Driver Assistance (if so equipped)
Select ”Driver Assistance” to access “Parking
button to
Aids” menu options. Use the
select and the ENTER button.
For additional information, refer to “RearView
Monitor” in the “Monitor, climate, audio, phone
and voice recognition systems” section.
The light sensitivity can be set to illuminate earlier
based on the brightness outside the vehicle. From
the Vehicle Settings menu, select “Light Sensitivity”. Use the ENTER button to change the sensitivity.
Light Off Delay (if so equipped)
The duration of the automatic headlights can be
changed from 0 to 180 seconds. From the Vehicle Settings menu, select “Light Off Delay”. Use
the ENTER button to change the duration.
Instruments and controls 2-19
Wiper with Speed
The wiper with speed can be set to be ON or
OFF. From the Vehicle Settings menu, select
“Wiper with Speed”. Use the ENTER button to
turn this feature ON or OFF.
I-Key Door Lock (if so equipped)
From the Vehicle Settings menu, select “I-Key
Door Lock”. When this item is turned on, the
request switch on the door is activated. When
this item is turned off, the request switch on the
door is deactivated. Use the ENTER button to
activate this function.
Selective-Unlock
When this item is turned on, only the driver’s door
is unlocked first after the door unlock operation.
When the door handle request switch on the
driver’s or front passenger’s side door is pushed
to be unlocked, only the corresponding door is
unlocked first. All the doors can be unlocked if the
door unlock operation is performed again within
1 minute. When this item is turned to OFF, all the
doors will be unlocked after the door unlock
operation is performed once. From the Vehicle
Settings menu, select “Selective Unlock”. Use
the ENTER button to activate this function.
2-20 Instruments and controls
Auto Door Unlock (if so equipped)
The auto door unlock function automatically unlocks all the doors when the shift lever is placed in
the P (Park) position. From the Vehicle Settings
menu, select “Auto Door Unlock”. Use the ENTER button to enable/disable this function.
Answer Back Horn
When the answer back horn is on, the horn will
chirp and the hazard indicators will flash once
when locking the vehicle with the Intelligent Key.
Remote Start (if so equipped)
The remote start function can be turned on or off.
If the setting is OFF the vehicle cannot be started
using the Intelligent Key. From the Vehicle Settings menu, select “Remote Start”. Use the ENTER button to enable/disable.
Battery Saver
The battery saver automatically turns off the ignition after a period of time when the ignition switch
is left in the ACC or ON position.
Exit Seat Slide (if so equipped)
When the exit seat slide is on the driver’s seat will
move backward for easy exit when the ignition
switch is placed in the OFF position and the
driver’s door is opened.
After getting into the vehicle and placing the
ignition switch in the ACC position, the driver’s
seat will move to the previous set position. For
additional information, refer to “Automatic drive
positioner” in the “Pre-driving checks and adjustments” section of this manual regarding setting
the seat position. Use the ENTER button to
enable/disable this function.
Exit steering up (if so equipped)
When the exit steering up feature is turned ON,
the steering wheel moves upward for easy exit
when the ignition switch is in the OFF position
and the driver’s door is opened.
After getting into the vehicle and placing the
ignition switch in the ACC position, the steering
wheel moves to the previous position. For additional information, refer to “Tilt and telescopic
operation” in the “Pre-driving checks and adjustments” section of this manual regarding setting
the steering wheel position. Use the ENTER button to enable/disable this function.
Main Menu Selection
The items that display can be enabled/disabled
when the ignition switch is placed in the ON
position. To change the items that display.
button to select and the ENTER
Use the
button to change a menu item:
● Trip Computer
From the “Main Menu Selection” select “Tire
Pressures” to display in the vehicle information
display when the ignition is placed in the ON
position.
4WD (if so equipped)
The 4WD can be enabled/disabled to display in
the vehicle information display when the ignition
switch is placed in the ON position.
● 4WD (if so equipped)
From the “Main Menu Selection” select “4WD” to
display the 4WD information when the ignition
switch is placed in the ON position.
● Fuel Economy
Fuel Economy
● Tire Pressures
Trip Computer
The trip computer can be enabled/disabled to
display in the vehicle information display when
the ignition switch is placed in the ON position.
From the “Main Menu Selection” select “Trip
Computer” to display in the vehicle information
display when the ignition is placed in the ON
position.
Tire Pressures
The tire pressures can be enabled/disabled to
display in the vehicle information display when
the ignition switch is placed in the ON position.
The fuel economy can be enabled/disabled to
display in the vehicle information display when
the ignition switch is placed in the ON position.
From the “Main Menu Selection” select “Fuel
Economy” to display in the vehicle information
display when the ignition is placed in the ON
position.
Body Color
The color of the vehicle that displays in the vehicle information display when the ignition switch
is placed in the ON position can be changed.
LIC2773
1. scheduled service: oil and oil filter
2. tires
3. other
Maintenance
The maintenance mode allows you to set alerts
for the reminding of maintenance intervals. To
change an item:
1. Press the
button.
2. Use the
button until “Settings” is selected, and press ENTER.
Instruments and controls 2-21
3. Select “Maintenance” using the
ton and press ENTER.
but-
Service
This indicator appears when the customer set
distance comes for changing the engine oil and
filter. You can set or reset the distance for checking or replacing these items. For scheduled maintenance items and intervals, refer to your
“NISSAN Service and Maintenance Guide.”
Tire
This indicator appears when the customer set
distance is reached for replacing tires. You can
set or reset the distance for replacing tires.
WARNING
The tire replacement indicator is not a
substitute for regular tire checks, including tire pressure checks. For additional
information, refer to “Changing wheels
and tires” in the “Maintenance and do-ityourself” section of this manual. Many factors including tire inflation, alignment,
driving habits and road conditions affect
tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does
not mean your tires will last that long. Use
the tire replacement indicator as a guide
only and always perform regular tire
checks. Failure to perform regular tire
checks, including tire pressure checks
could result in tire failure. Serious vehicle
damage could occur and may lead to a
collision, which could result in serious
personal injury or death.
Other
This indicator appears when the customer set
distance is reached for checking or replacing
maintenance items other than the engine oil, oil
filter and tires. Other maintenance items can include such things as air filter or tire rotation. The
distance for checking or replacing the items can
be set or reset.
2-22 Instruments and controls
Alarms
This setting allows the customer to set alarms for
outside temperature and a timer alert.
1. Press the
button.
2. Use the
button until “Settings” is selected, and press ENTER.
3. Select “Alarms” using the
press ENTER.
button and
Outside Temperature
This setting allows the customer to
enable/disable the alert for low outside temperature in the vehicle information display.
1. Use the
Temperature”.
button to select “Outside
2. Press the ENTER button to turn on/off the
outside temperature in the vehicle information display.
Timer Alert
This setting allows the driver to set an alert to
notify a set time has been reached.
1. Use the
button to select “Timer Alert”.
2. Press the ENTER button.
3. To change the timer amount, use the
button and the ENTER button to save the
selected time amount.
Language
The language of the vehicle information display
can be changed to:
● US English
● French
● Spanish
,
, and the ENTER buttons to
Use the
select and change the language of the vehicle
information display. The language of the center
display/navigation can be changed independently of the vehicle information display. For additional information, refer to “How to use the
setting button” in the “Monitor, climate, audio,
phone and voice recognition systems” section of
this manual.
Units
The units that are shown in the vehicle information display can be changed:
● Mileage
● Tire pressures
● Temperature
,
, and the ENTER buttons to
Use the
select and change the units of the vehicle information display. The units of the navigation screen
can be changed independently of the vehicle
information display. For additional information,
refer to “How to use the setting button” in the
“Monitor, climate, audio, phone and voice recognition systems” section of this manual.
Use the
and the ENTER buttons to select
and change the unit.
Mileage
The unit for the mileage that displays in the vehicle information display can be changed to:
Use the ENTER button to toggle choices.
● miles, MPG
● km/h, l/100km
● km/h, km/l
and the ENTER buttons to select
Use the
and change the unit.
Tire Pressures
The unit for tire pressure that displays in the
vehicle information display can be changed to:
● psi
Temperature
The temperature that displays in the vehicle information display can be changed from:
● °F (Fahrenheit)
● °C (Celsius)
Welcome Effects
The welcome screen display can be turned
ON/OFF to display when the ignition switch is
placed in the ACC or ON position. To
enable/disable the welcome screen:
1. Press the
button.
2. Use the
buttons to select “Settings”,
and press ENTER.
3. Select “Welcome Effects” using the
buttons and press ENTER to turn this function ON or OFF.
● kPa
● bar
● Kgf/cm2
Instruments and controls 2-23
Factory Reset
The settings in the vehicle information display can
be reset back to the factory default. To reset the
vehicle information display:
1. Press the
button.
2. Use the
buttons to select “Settings”,
and press the ENTER button.
3. Select “Factory Reset” using the
tons and press the ENTER button.
but-
4. Select “YES” to return all settings back to
default by pressing the ENTER button.
2-24 Instruments and controls
LIC2557
VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS
1. No Key Detected
4. Push ignition to OFF
5. Key battery low
2. Key ID Incorrect
6. Engine start operation for Intelligent Key system
3. Shift to Park
7. Release parking brake
8. Low Fuel
9. Low Washer Fluid
10. Door Open
11. Liftgate Open
Instruments and controls 2-25
12. Timer Alert – Time for a driver break?
13. Low Outside Temperature
14. Power will turn off to save the battery
15. CVT Error: See Owner’s Manual
16. Reminder: Turn OFF headlights
17. Low Oil Pressure
18. Key Registration Complete
19. Tire Pressure Low - Add Air
20. TPMS Error: See Owner’s Manual
For additional information, refer to “NISSAN Intelligent Key®” in the “Pre-driving checks and
adjustments” section of this manual.
Shift to Park
This warning illuminates when the ignition switch
is in the ACC or OFF position and the shift lever
is in any position other than P (Park) position.
Also, a chime sounds when the ignition switch is
in the OFF position.
If this warning illuminates, move the shift lever to
the P (Park) position or start the engine.
22. Loose Fuel Cap
For additional information about Intelligent Key,
refer to “NISSAN Intelligent Key®” in the “Predriving checks and adjustments” section.
23. I-Key System Error: See Owner’s Manual
Push ignition to OFF
21. Remote Start (if so equipped)
No Key Detected
This warning appears when the Intelligent Key is
left outside the vehicle with the ignition switch in
the ON or ACC position. Make sure the Intelligent Key is inside the vehicle.
Key ID Incorrect
This warning appears when the ignition switch is
placed from the OFF position and the Intelligent
Key is not recognized by the system. You cannot
start the engine with an unregistered key.
2-26 Instruments and controls
After the Push ignition to OFF warning illuminates, the warning will illuminate if the ignition
switch is placed in the ACC position when the
shift lever is moved to the P (Park) position.
To turn off the Push warning, place the ignition
switch in the ON position and then in the LOCK
position.
Key low battery
This indicator illuminates when the Intelligent Key
battery is running out of power.
If this indicator illuminates, replace the battery
with a new one. For additional information, refer
to “Battery replacement” in the “Maintenance and
do-it-yourself” section of this manual.
Engine start operation for Intelligent Key
system
This indicator appears when the battery of the
Intelligent Key is low and when the Intelligent Key
system and the vehicle are not communicating
normally.
If this appears, touch the ignition switch with the
Intelligent Key while depressing the brake pedal.
For additional information, refer to “NISSAN Intelligent Key® battery discharge” in the “Starting
and driving” section of this manual.
Release Parking Brake
This warning illuminates in the message area of
the vehicle information display when the parking
brake is set and the vehicle is driven.
Low Fuel
This warning illuminates when the fuel level in the
fuel tank is getting low. Refuel as soon as it is
convenient, preferably before the fuel gauge
reaches 0 (Empty). There will be a small reserve of fuel in the tank when the fuel
gauge needle reaches 0 (Empty).
Low Washer Fluid
This warning illuminates when the windshieldwasher fluid is at a low level. Add windshieldwasher fluid as necessary. For additional information, refer to “Windshield-washer fluid” in the
“Maintenance and do-it-yourself” section of this
manual.
Power will turn off to save the battery
Key Registration Complete
This warning appears in message area of the
vehicle information display after a period of time if
the shift lever has not moved from the P (Park)
position.
This appears when a new Intelligent Key is registered to the vehicle.
Door Open
This warning illuminates when a door has been
opened when the engine is running.
This warning illuminates when the there is a problem with the CVT system. If this warning comes
on, have the system checked by a NISSAN
dealer.
Liftgate Open
Reminder: Turn OFF headlights
This warning illuminates when the liftgate has
been opened when the engine is running.
This warning appears when the headlights are
left in the ON position when exiting the vehicle.
Place the headlight switch in the OFF or AUTO
position. For additional information, refer to
“Headlight and turn signal switch” in this section.
This warning appears when the low tire pressure
warning light in the meter illuminates and low tire
pressure is detected. The warning appears each
time the ignition switch is placed in the ON
position as long as the low tire pressure warning
light remains illuminated. If this warning appears,
stop the vehicle and adjust the tire pressures of
all four tires to the recommended COLD tire
pressure shown on the Tire and Loading Information label. For additional information, refer to
“Low tire pressure warning light” in this section
and “Tire Pressure Monitoring System (TPMS)”
in the “Starting and driving” section of this
manual.
Low Oil Pressure
TPMS Error: See Owner’s Manual
This warning appears in message area of the
vehicle information display if low oil pressure is
detected. This gauge is not designed to indicate
low oil level. The low oil pressure warning is
not designed to indicate a low oil level. Use
the dipstick to check the oil level. For additional
information, refer to “Engine oil” in the “Maintenance and do-it-yourself” section of this manual.
This warning appears when there is an error with
your TPMS. If this warning comes on, have the
system checked by a NISSAN dealer.
Timer Alert – Time for a driver break?
This indicator appears when the set time is
reached. The time can be set up to six hours. For
setting the timer, refer to “Timer alert” in this
section.
Low Outside Temperature
This warning appears if the outside temperature
is below 37°F (3°C). The temperature can be
changed to display in Celsius or Fahrenheit. For
additional information, refer to “Temperature” in
this section.
CVT Error: See Owner’s Manual
Tire Pressure Low - Add Air warning
Instruments and controls 2-27
SECURITY SYSTEMS
Push to start (if so equipped)
The system helps deter vehicle theft but cannot
prevent it, nor can it prevent the theft of interior or
exterior vehicle components in all situations. Always secure your vehicle even if parking for a
brief period. Never leave your Intelligent Key in
the vehicle, and always lock the vehicle when
unattended. Be aware of your surroundings, and
park in secure, well-lit areas whenever possible.
This warning appears in the vehicle information
display when the vehicle has been started using
the remote start function. To start the vehicle,
apply the brake and place the ignition switch in
the ON position.
Loose Fuel Cap
This warning appears when the fuel-filler cap is
not tightened correctly after the vehicle has been
refueled. For additional information, refer to
“Fuel-filler cap” in the “Pre-driving checks and
adjustments” section of this manual.
I-Key System Error: See Owner’s Manual
After the ignition switch is pushed to the ON
position, this light comes on for about 2 seconds
and then turns off.
The I-Key System Error message warns of a
malfunction with the Intelligent Key system. If the
light comes on while the engine is stopped, it may
be impossible to start the engine.
If the light comes on while the engine is running,
you can drive the vehicle. However in these
cases, contact a NISSAN dealer for repair as
soon as possible.
2-28 Instruments and controls
LIC2385
Your vehicle may have two types of security systems:
● Vehicle security system
● NISSAN Vehicle Immobilizer System
Many devices offering additional protection, such
as component locks, identification markers, and
tracking systems, are available at auto supply
stores and specialty shops. A NISSAN dealer
may also offer such equipment. Check with your
insurance company to see if you may be eligible
for discounts for various theft protection features.
How to arm the vehicle security
system
1. Close all windows. (The system can be
armed even if the windows are open.)
VEHICLE SECURITY SYSTEM
2. Remove the Intelligent Key from the vehicle.
The vehicle security system provides visual and
audible alarm signals if someone opens the
doors, trunk, liftgate or the hood when the system
is armed. It is not, however, a motion detection
type system that activates when a vehicle is
moved or when a vibration occurs.
3. Close all doors, hood and trunk/liftgate.
Lock all doors. The doors can be locked with
the Intelligent Key, door handle request
switch, power door lock switch or mechanical key.
4. Confirm that the security indicator light
comes on. The security light stays on for
about 30 seconds. The vehicle security system is now pre-armed. After about 30 seconds the vehicle security system automatically shifts into the armed phase. The
security light begins to flash once every
3 seconds. If, during the 30-second pre-arm
time period, the driver’s door is unlocked by
the key or the key fob, or the ignition switch
is placed in the ACC or ON position, the
system will not arm.
● Even when the driver and/or passengers are in the vehicle, the system will
activate with all the doors, hood and
trunk lid locked with the ignition switch
placed in the LOCK position. When
placing the ignition switch in the ACC
or ON position, the system will be released.
● The alarm automatically turns off after a period of time. However, the alarm reactivates if
the vehicle is tampered with again. The alarm
can be shut off by unlocking the driver’s door
button
with the key, or by pressing the
on the Intelligent Key.
The alarm is activated by:
● opening the door or hood without using the
key or Intelligent Key (even if the door is
unlocked by releasing the door inside lock
switch).
FCC Notice:
For USA:
This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
How to stop an activated alarm
NOTE:
The alarm stops only by unlocking the driver’s
door or the trunk/liftgate with the key, pressing
button on the Intelligent Key, or pressthe
ing the request switch on the driver’s or passenger’s door with the Intelligent Key in range of the
door handle.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Vehicle security system activation
NISSAN VEHICLE IMMOBILIZER
SYSTEM
The vehicle security system will give the following
alarm:
The NISSAN Vehicle Immobilizer System will not
allow the engine to start without the use of a
registered key.
● The headlights blink and the horn sounds
intermittently.
Never leave these keys in the vehicle.
For Canada:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that
may cause undesired operation of the device.
Instruments and controls 2-29
WINDSHIELD WIPER AND WASHER
SWITCH
WARNING
In freezing temperatures the washer solution may freeze on the window and obscure your vision which may lead to an
accident. Warm the window with the defroster before you wash the window.
CAUTION
● Do not operate the washer continuously
for more than 30 seconds.
● Do not operate the washer if the reservoir tank is empty.
LIC0474
Security indicator light
The security indicator light blinks whenever the
ignition switch is placed in the OFF, LOCK or ACC
position. This function indicates the NISSAN Vehicle Immobilizer System is operational.
If the NISSAN Vehicle Immobilizer System is malfunctioning, the light will remain on while the
ignition switch is placed in the ON position.
If the light still remains on and/or the engine will not start, see a NISSAN dealer for
NISSAN Vehicle Immobilizer System service as soon as possible. Please bring all
registered keys that you have when visiting
a NISSAN dealer for service.
2-30 Instruments and controls
● Do not fill the window washer reservoir
with washer fluid concentrates at full
strength. Some methyl alcohol based
washer fluid concentrates may permanently stain the grille if spilled while
filling the window washer reservoir.
● Pre-mix washer fluid concentrates with
water to the manufacturer’s recommended levels before pouring the fluid
into the window washer reservoir. Do
not use the window washer reservoir to
mix the washer fluid concentrate and
water.
If the windshield wiper operation is interrupted by
snow or ice, the wiper may stop moving to protect
its motor. If this occurs, turn the wiper switch to
the OFF position and remove the snow or ice that
is on and around the wiper arms. In approximately
1 minute, turn the switch on again to operate the
wiper.
2
䊊
3
䊊
Low (LO) — continuous low speed operation
High (HI) — continuous high speed operation
4 to have 1 sweep operation
Push the lever up 䊊
(MIST) of the wiper.
5 to operate the
Pull the lever toward you 䊊
washer. The wiper will also operate several times.
LIC2789
LIC2897
Type A (if so equipped)
Type B (if so equipped)
SWITCH OPERATION
The windshield wiper and washer operates when
the ignition switch is in the ON position.
Push the lever down to operate the wiper at the
following speed:
1
䊊
Intermittent (INT) — intermittent operation
can be adjusted by turning the knob toward
A (Slower) or 䊊
B (Faster). Also, the inter䊊
mittent operation speed varies in accordance with the vehicle speed. (For example,
when the vehicle speed is high, the intermittent operation speed will be faster.)
Instruments and controls 2-31
REAR WINDOW WIPER AND
WASHER SWITCH
3 to operate the
Push the switch forward 䊊
washer. The wiper will also operate several times.
WARNING
In freezing temperatures the washer solution may freeze on the window and obscure your vision. Warm the rear window
with the defroster before you wash the
rear window.
CAUTION
● Do not operate the washer continuously
for more than 30 seconds.
● Do not operate the washer if the reservoir is empty.
● Do not fill the windshield-washer fluid
reservoir with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates
may permanently stain the grille if
spilled while filling the windshieldwasher fluid reservoir.
● Pre-mix washer fluid concentrates with
water to the manufacturer’s recommended levels before pouring the fluid
into the windshield-washer fluid reservoir. Do not use the windshield-washer
fluid reservoir to mix the washer fluid
concentrate and water.
LIC2898
If the rear window wiper operation is interrupted
by snow, etc., the wiper may stop moving to
protect its motor. If this occurs, turn the wiper
switch to OFF and remove the snow, etc. on and
around the wiper arms. After about 1 minute, turn
the switch ON again to operate the wiper.
The rear window wiper and washer operate when
the ignition switch is in the ON position. Turn the
switch clockwise from the OFF position to operate the wiper.
1
䊊
2
䊊
2-32 Instruments and controls
Intermittent (INT) — intermittent operation
(not adjustable)
Low (ON) — continuous low speed operation
REAR WINDOW AND OUTSIDE
MIRROR (if so equipped)
DEFROSTER SWITCH
HEADLIGHT AND TURN SIGNAL
SWITCH
WIC1554
Type A (if so equipped)
To defrost the rear window glass and outside
mirrors (if so equipped), start the engine and
push the rear window defroster switch on. The
rear window defroster indicator light on the
switch comes on. Push the switch again to turn
the defroster off.
LIC1388
Type B (if so equipped)
WIC1435
Type A (if so equipped)
NOTE:
The top and bottom few rows of wires on
the rear window are not part of the rear
window defroster system. These wires
make up the antenna for the audio system.
The rear window defroster automatically turns off
after approximately 15 minutes.
CAUTION
When cleaning the inner side of the rear
window, be careful not to scratch or damage the rear window defroster.
Instruments and controls 2-33
WIC1436
Type B (if so equipped)
HEADLIGHT CONTROL SWITCH
Lighting
1
䊊
2
䊊
When turning the switch to the
position, the front parking, tail, license plate and
instrument panel lights come on.
When turning the switch to the
position, the headlights come on and all the other
lights remain on.
2-34 Instruments and controls
WIC1510
Type C (if so equipped)
CAUTION
Use the headlights with the engine running to avoid discharging the vehicle
battery.
SIC3268
Autolight system (if so equipped)
The autolight system allows the headlights to turn
on and off automatically. The autolight system
can:
● Turn on the headlights, front parking, tail,
license plate and instrument panel lights automatically when it is dark.
● Turn off all the lights when it is light.
● Keep all the lights on for a period of time after
you place the ignition switch in the OFF
position and all doors are closed.
NOTE:
Autolight activation sensitivity and the time
delay for autolight shutoff can be adjusted.
For additional information, refer to “Vehicle information display” in this section.
To turn on the autolight system:
1. Turn the headlight switch to the AUTO posi1 .
tion 䊊
2. Turn the ignition switch to ON.
3. The autolight system automatically turns the
headlights on and off.
Initially, if the ignition switch is turned OFF and a
door is opened and left open, the headlights
remain ON for a period of time. If another door is
opened while the headlights are on, then the
timer is reset.
To turn the autolight system off, turn the switch to
, or
position.
the OFF,
LIC2237
Be sure you do not put anything on top of
the autolight sensor located in the top side
1 . The autolight
of the instrument panel 䊊
sensor controls the autolight; if it is covered, the autolight sensor reacts as if it is
dark out and the headlights will illuminate.
If this occurs while parked with the engine
off and the ignition switch placed in the ON
position, your vehicle’s battery could become discharged.
WIC1438
Headlight beam select
1
䊊
2
䊊
3
䊊
To select the high beam function, push the
lever forward. The high beam lights come on
light illuminates.
and the
Pull the lever back to select the low beam.
Pulling and releasing the lever flashes the
headlight high beams on and off.
Battery saver system
The battery saver automatically turns off the ignition after a period of time when the ignition switch
is left in the ACC or ON position.
Instruments and controls 2-35
DAYTIME RUNNING LIGHT SYSTEM
(Canada only)
The daytime running lights automatically illuminate when the engine is started with the parking
brake released. The daytime running lights operate with the headlight switch in the OFF position
position. Turn the headlight switch
or in the
to the
position for full illumination when
driving at night.
If the parking brake is applied before the engine is
started, the daytime running lights do not illuminate. The daytime running lights illuminate when
the parking brake is released. The daytime running lights will remain on until the ignition switch
is placed in the OFF position.
WARNING
When the daytime running light system is
active, tail lights on your vehicle are not
on. It is necessary at dusk to turn on your
headlights. Failure to do so could cause
an accident injuring yourself and others.
2-36 Instruments and controls
LIC2389
INSTRUMENT BRIGHTNESS
CONTROL
A to increase the brightPush the “+” button 䊊
ness of instrument panel lights when driving at
night.
B to decrease the brightPush the “-” button 䊊
ness of instrument panel lights when driving at
night.
WIC1439
TURN SIGNAL SWITCH
Turn signal
1
䊊
Move the lever up or down to signal the
turning direction. When the turn is completed, the turn signal cancels automatically.
Lane change signal
2
䊊
Move the lever up or down until the turn
signal begins to flash, but the lever does not
latch, to signal a lane change. Hold the lever
until the lane change is completed.
Move the lever up or down until the turn
signal begins to flash, but the lever does not
latch, and release the lever. The turn signal
will automatically flash three times.
Choose the appropriate method to signal a lane
change based on road and traffic conditions.
WIC1440
Type A (if so equipped)
WIC1513
Type B (if so equipped)
FOG LIGHT SWITCH (if so equipped)
To turn the fog lights on, turn the headlight switch
to the
position, then turn the fog light
switch to the
position.
To turn the fog lights on with the headlight switch in
the AUTO position, the headlights must be on, then
position.
turn the fog light switch to the
To turn the fog lights off, turn the fog light switch
to the OFF position.
The headlights must be on and the low beams
selected for the fog lights to operate. The fog
lights automatically turn off when the high beam
headlights are selected.
Instruments and controls 2-37
HORN
HEATED SEATS (if so equipped)
WARNING
Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or
have an inability to feel pain in body parts
that contact the seat. Use of the seat
heater by such people could result in serious injury.
CAUTION
LIC2227
To sound the horn, push near the horn icon on the
steering wheel.
WARNING
Do not disassemble the horn. Doing so
could affect proper operation of the
supplemental front air bag system. Tampering with the supplemental front air bag
system may result in serious personal
injury.
LIC2876
The front seats are warmed by built-in heaters.
1. Start the engine.
2. Push the LO or HI position of the switch, as
desired. The indicator light in the switch will
illuminate.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
3. When the seat is warmed or before you
leave the vehicle, be sure to turn the switch
off.
2-38 Instruments and controls
● The battery could run down if the seat
heater is operated while the engine is
not running.
● Do not use the seat heater for extended
periods or when no one is using the
seat.
● Do not put anything on the seat which
insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat
may become overheated.
● Do not place anything hard or heavy on
the seat or pierce it with a pin or similar
object. This may result in damage to the
heater.
● Any liquid spilled on the heated seat
should be removed immediately with a
dry cloth.
HEATED 2ND ROW SEATS (if so
equipped)
● When cleaning the seat, never use
gasoline, benzine, thinner, or any similar materials.
● If any malfunctions are found or the
heated seat does not operate, turn the
switch off and have the system checked
by your NISSAN dealer.
WARNING
Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or
have an inability to feel pain in body parts
that contact the seat. Use of the seat
heater by such people could result in serious injury.
● When cleaning the seat, never use
gasoline, benzine, thinner, or any similar materials.
● If any malfunctions are found or the
heated seat does not operate, turn the
switch off and have the system checked
by a NISSAN dealer.
CAUTION
● The battery could run down if the seat
heater is operated while the engine is
not running.
● Do not use the seat heater for extended
periods or when no one is using the
seat.
● Do not put anything on the seat which
insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat
may become overheated.
● Do not place anything hard or heavy on
the seat or pierce it with a pin or similar
object. This may result in damage to the
heater.
● Any liquid spilled on the heated seat
should be removed immediately with a
dry cloth.
Instruments and controls 2-39
CLIMATE CONTROLLED SEAT
SWITCH (if so equipped)
3. When the seat is warmed or before you
leave the vehicle, be sure to turn the switch
off.
LIC2876
LIC2877
The 2nd row seats are warmed by built-in heaters. The switches are located on the rear of the
front center console and can be operated independently of each other.
The climate controlled seat warms up or cools
down the front seat by blowing warm or cool air
from under the surface of the seat. The climate
control switch is located on the center console.
1. Start the engine.
2. Push the LO or HI position of the switch, as
desired. The indicator light in the switch will
illuminate.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long as
the switch is on.
2-40 Instruments and controls
The climate controlled seat can be operated as
follows:
1. Start the engine.
A to the heat side 䊊
1
2. Turn the control knob 䊊
2 . The indicator light 䊊
B on
or the cool side 䊊
the control knob will illuminate.
HEATED STEERING WHEEL (if so
equipped)
3. Adjust the desired amount of air using the
control knob. The climate controlled seat
blower remains on low speed for approximately 60 seconds after turning the switch
on or selecting the desired temperature.
4. When the vehicle’s interior is warmed or
cooled, or before you leave the vehicle, be
sure to turn the control knob to the Off
B on
(center) position. The indicator light 䊊
the control knob goes off with the switch in
the off (center) position.
To check the air filter for the climate controlled
seat, contact a NISSAN dealer.
WARNING
Do not use or allow occupants to use the
climate controlled seats if you or the occupants can not monitor seat temperatures or have an inability to feel pain in
those body parts in contact with the seat.
Use of the climate controlled seats by
such people could result in serious injury.
CAUTION
● The battery could run down if the climate control seat is operated while the
engine is not running.
● Do not use the climate control seat for
extended periods or when no one is
using the seat.
● Do not put anything on the seat which
insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat
may become overheated.
● Do not place anything hard or heavy on
the seat or pierce it with a pin or similar
objects. This may result in damage to
the climate controlled seat.
● Any liquid spilled on the seat should be
removed immediately with a dry cloth
LIC0421
● The climate controlled seat has an air
filter. Do not operate the climate controlled seat without an air filter. This
may result in damage to the system.
The heated steering wheel system is designed to
operate only when the surface temperature of the
steering wheel is below 68°F (20°C).
● When cleaning the seat, never use
gasoline, benzine, thinner, or any similar materials.
Push the heated steering wheel switch to warm
the steering wheel after the engine starts. The
indicator light will come on.
● If any malfunctions are found or the
climate controlled seat does not operate, turn the switch off and have the
system checked by your NISSAN dealer.
If the surface temperature of the steering wheel is
below 68°F (20°C), the system will heat the
steering wheel and cycle off and on to maintain a
temperature above 68°F (20°C). The indicator
light will remain on as long as the system is on.
Push the switch again to turn the heated steering
wheel system off manually. The indicator light will
go off.
Instruments and controls 2-41
VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH
POWER INVERTER SWITCH (if so
equipped)
NOTE:
If the surface temperature of the steering
wheel is above 68°F (20°C) when the switch
is turned on, the system will not heat the
steering wheel. This is not a malfunction.
2-42 Instruments and controls
LIC2315
LIC2231
The vehicle should be driven with the VDC system on for most driving conditions.
If the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to reduce
wheel spin. The engine speed will be reduced
even if the accelerator is depressed to the floor. If
maximum engine power is needed to free a stuck
vehicle, turn the VDC system off.
To turn off the VDC system, push the VDC OFF
indicator will come on.
switch. The
Push the VDC OFF switch again or restart the
engine to turn on the system. For additional information, refer to “Vehicle Dynamic Control (VDC)
system” in the “Starting and driving” section of
this manual.
To use the outlets for devices that require 120v
power, place the ignition in the ON position and
push the power inverter switch.
The switch will illuminate when enabled.
CAUTION
● Use power outlets with the engine running to avoid discharging the vehicle
battery.
● Do not attempt to use this while driving.
● Do not use double adapters or more
than one electrical accessory, doing so
could significantly drain the battery of
your vehicle.
TOW MODE SWITCH
POWER OUTLETS
For additional information, refer to “Tow mode” in
the “Technical and consumer information” in this
section.
LIC2391
LIC2878
Tow mode should be used when pulling a heavy
trailer or hauling a heavy load. Driving the vehicle
in the tow mode with no trailer/load or light
trailer/light load will not cause any damage. However, fuel economy may be reduced, and the
transmission/engine driving characteristics may
feel unusual.
Press the tow mode switch to activate tow mode.
The indicator light on the tow mode switch illuminates when tow mode is selected. Press the tow
mode switch again to turn tow mode OFF.
Instrument Panel (2 outlets may be if so
equipped)
12V OUTLETS
The power outlets are for powering electrical
accessories such as cellular telephones. They
are rated at 12 volt, 120W (10A) maximum.
The front and center console power outlets are
powered only when the ignition switch is in the
ACC or ON position.
Tow mode is automatically canceled when the
ignition switch is placed in the OFF position.
Instruments and controls 2-43
● Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
● When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
LIC2408
Center Console (if so equipped)
CAUTION
● The outlet and plug may be hot during
or immediately after use.
● Only certain power outlets are designed
for use with a cigarette lighter unit. Do
not use any other power outlet for an
accessory lighter. See your NISSAN
dealer for additional information.
● Do not use with accessories that exceed
a 12 volt, 120W (10A) power draw.
● Do not use double adapters or more
than one electrical accessory.
2-44 Instruments and controls
LIC2236
Cargo Area (if so equipped)
● Use power outlets with the engine running to avoid discharging the vehicle
battery.
● Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
● Before inserting or disconnecting a
plug, be sure the electrical accessory
being used is turned OFF.
STORAGE
● Avoid using power outlets when the air
conditioner, headlights or rear window
defroster is on.
● Before inserting or disconnecting a
plug, be sure the electrical accessory
being used is turned OFF.
● Push the plug in as far as it will go. If
good contact is not made, the plug may
overheat or the internal temperature
fuse may open.
LIC2407
2nd Row
120V OUTLET (if so equipped)
● When not in use, be sure to close the
cap. Do not allow water or any other
liquid to contact the outlet.
LIC2392
Front Console
MAP POCKETS
CAUTION
● The outlet and plug may be hot during
or immediately after use.
● Use power outlets with the engine running to avoid discharging the vehicle
battery.
● Do not use double adaptors or more
than one electrical accessory.
Instruments and controls 2-45
LIC2782
LIC2243
WIC1120
SEATBACK POCKETS
GLOVE BOX
CONSOLE BOX
The seatback pockets are located on the back of
the driver and front passenger seat. The pockets
can be used to store maps.
Open the glove box by pulling the handle. Use the
1 or unlocking 䊊
2 the
master key when locking 䊊
glove box.
Upper half
WARNING
Keep glove box lid closed while driving to
help prevent injury in an accident or a
sudden stop.
2-46 Instruments and controls
Pull up on the driver’s side latch to open the
upper half of the console box.
The upper half of the console box may be used for
storage of cellular phones. An access hole is
provided at the front of the upper half of the
console box for a phone or iPod® cord routing to
the power outlet.
CAUTION
● Do not use for anything other than
sunglasses.
● Do not leave sunglasses in the sunglasses holder while parking in direct
sunlight. The heat may damage the
sunglasses.
LIC0702
LIC2312
Lower half
SUNGLASSES HOLDER
Pull up on the passenger’s side latch to open the
lower half of the console box. A power outlet is
located inside the console box and there is storage for compact discs.
To open the sunglasses holder, push and release.
Only store one pair of sunglasses in the holder.
WARNING
Keep the sunglasses holder closed while
driving to prevent an accident.
Instruments and controls 2-47
LIC2387
Front console
CUP HOLDERS
LIC2395
Rear door
LIC2212
2nd row
CAUTION
Do not recline the rear seatback when you
use the cup holders on the rear armrest.
Doing so may cause the beverages to spill
over, and if they are hot, they may scald
the passengers.
2-48 Instruments and controls
LIC2242
3rd row
CAUTION
LIC2393
Bottle holder — front
LIC2394
Bottle holder — rear
CAUTION
● Avoid abrupt starting and braking when
the cup holder is being used to prevent
spilling the drink. If the liquid is hot, it
can scald you or your passenger.
● Do not use bottle holder for any other
objects that could be thrown about in
the vehicle and possibly injure people
during sudden braking or an accident.
● Use only soft cups in the cup holder.
Hard objects can injure you in an
accident.
● Do not use bottle holder for open liquid
containers.
Instruments and controls 2-49
WARNING
● Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. Do not place cargo higher than
the seatbacks. In a sudden stop or collision, unsecured cargo could cause
personal injury.
● Use suitable ropes and hooks to secure
cargo.
LIC2214
STORAGE TRAY
WARNING
Do not place sharp objects in the trays to
help prevent injury in an accident or sudden stop.
LIC2208
LUGGAGE HOOKS
When securing items using luggage hooks located on the back of the seat or side finisher do
not apply a load over more than 6.5 lbs (29 N) to
a single hook.
The luggage hooks that are located on the floor
should have loads less than 110 lbs (490 N) to a
single hook.
The luggage hooks can be used to secure cargo
with ropes or other types of straps.
2-50 Instruments and controls
● Never allow anyone to ride in the luggage area. It is extremely dangerous to
ride in a cargo area inside of a vehicle.
In a collision, people riding in these
areas are more likely to be seriously
injured or killed.
● Do not allow people to ride in any area
of your vehicle that is not equipped with
seats and seat belts.
● The child restraint top tether strap may
be damaged by contact with items in
the cargo area. Secure any items in the
cargo area. Your child could be seriously injured or killed in a collision if
the top tether strap is damaged.
● Be sure everyone in your vehicle is in a
seat and using a seat belt properly.
Do not apply any load directly to the roof side
rails. Cross bars must be installed before applying load/cargo/luggage to the roof of the vehicle.
Be careful that your vehicle does not exceed the
Gross Vehicle Weight Rating (GVWR) or its
Gross Axle Weight Rating (GAWR front and
rear). The GVWR and GAWR are located on the
F.M.V.S.S. or C.V.M.S.S. certification label (located on the driver’s door pillar). For additional
information regarding GVWR and GAWR, refer
to “Vehicle loading information” in the “Technical
and customer information” section of this manual.
LIC2244
CARGO AREA STORAGE BIN
1
To access the floor storage area, push down 䊊
to raise the handle, then pull up on the handle to
lift the luggage board.
LIC2386
ROOF RACK (if so equipped)
Genuine NISSAN accessory cross bars are available through your NISSAN dealer. Contact an
NISSAN dealer for crossbar or other equipment
information.
Always distribute the luggage evenly on the cross
bars. Do not load more than 150 lb (68 kg) on the
cross bars. Observe the maximum load limit
shown on the cross bars or roof carriers when
you attach them on the roof cross bars. Contact
an NISSAN dealer for crossbar or other equipment information.
WARNING
● Drive extra carefully when the vehicle is
loaded at or near the cargo carrying
capacity, especially if the significant
portion of that load is carried on the
cross bars.
● Heavy loading of the cross bars has the
potential to affect the vehicle stability
and handling during sudden or unusual
handling maneuvers.
● Roof rack cross bars should be evenly
distributed.
● Do not exceed maximum roof rack cross
bars load.
Instruments and controls 2-51
WINDOWS
● Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. In a sudden stop or collision,
unsecured cargo could cause personal
injury.
CAUTION
Always install the cross bars onto the roof
side rails before loading cargo of any kind.
Loading cargo directly onto the roof side
rails or the vehicle’s roof may cause vehicle damage.
POWER WINDOWS
WARNING
● Make sure that all passengers have
their hands, etc. inside the vehicle while
it is in motion and before closing the
windows. Use the window lock switch to
prevent unexpected use of the power
windows.
● Do not leave children unattended inside
the vehicle. They could unknowingly activate switches or controls and become
trapped in a window. Unattended children could become involved in serious
accidents.
The power windows operate when the ignition
switch is placed in the ON position, or for a
period of time after the ignition switch is placed in
the OFF position. If the driver’s or passenger’s
door is opened during this period of time, the
power to the windows is canceled.
2-52 Instruments and controls
LIC2396
1.
2.
3.
4.
5.
6.
Window lock button
Power door lock switch
Front passenger side automatic switch
Right rear passenger side switch
Left rear passenger side switch
Driver side automatic switch
Driver’s side power window switch
The driver’s side control panel is equipped with
switches to open or close all of the windows.
To open a window, push the switch to the first
detent and continue to hold down until the desired window position is reached. To close a
window, pull the switch to the first detent and
continue to hold up until the desired window
position is reached.
Locking passengers’ windows
When the window lock switch is depressed, only
the driver’s side window can be opened or
closed. Push it again to cancel the window lock
function.
LIC2397
Front passenger’s power window
switch
The passenger’s window switch operates only
the corresponding passenger’s window. To open
the window partially, push the switch down lightly
until the desired window position is reached. To
close the window partially, pull the switch up until
the desired window position is reached.
LIC2663
Rear power window switch
The rear power window switches open or close
only the corresponding windows. To open the
1 . To
window, push the switch and hold it down 䊊
2 .
close the window, pull the switch up 䊊
Instruments and controls 2-53
MOONROOF (if so equipped)
Auto-reverse function
The auto-reverse function can be activated when
a window is closed by automatic operation.
Depending on the environment or driving
conditions, the auto-reverse function may
be activated if an impact or load similar to
something being caught in the window occurs.
WARNING
LIC0410
Automatic operation (if so equipped)
To fully open a window equipped with automatic
operation, press the window switch down to the
second detent and release it; it need not be held.
The window automatically opens all the way. To
stop the window, lift the switch up while the
window is opening.
2-54 Instruments and controls
There are some small distances immediately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., inside
the vehicle before closing the window.
If the vehicle’s battery is disconnected, replaced,
or jump started, the power window auto-reverse
function may not operate properly. If this occurs,
please contact the dealer to re-initialize the
power window auto-reverse system.
If the control unit detects something caught in a
window equipped with automatic operation, as it
is closing, the window will be immediately lowered.
LIC2313
POWER MOONROOF
The moonroof will only operate when the ignition
switch is placed in the ON position. The power
moonroof is operational for a period of time, even
if the ignition switch is placed in the ACC or OFF
position. If the driver’s door or the front passenger’s door is opened during this period of time,
the power to the moonroof is canceled.
Sliding the moonroof
To fully open or close the moonroof, push the
2 or close 䊊
1 position and
switch to the open 䊊
release it; it need not be held. The roof will
automatically open or close all the way. To stop
the roof, push the switch once more while it is
opening or closing.
Tilting the moonroof
To tilt up, first close the moonroof, then push the
1 and release it; it
switch to the tilt up position 䊊
need not be held. To tilt down the moonroof, push
2 .
the switch to the tilt down position 䊊
Resetting the moonroof switch
If the moonroof does not operate properly, perform the following procedure to initialize the
moonroof operation system.
1. Turn ignition switch ON.
2. Press and hold the moonroof tilt switch forward until the moonroof stops.
3. Release the moonroof switch.
4. Press and hold the tilt up switch within
6 seconds.
5. The roof glass will Tilt-Down, Slide-Close,
Slide-Open, Slide-Close, Tilt-Up, TiltDown.
6. Release the switch; initialization is complete
if the moonroof operates normally.
If the moonroof does not operate properly after
performing the procedure above, have your vehicle checked by a NISSAN dealer.
Auto-reverse function (when closing or
tilting down the moonroof)
The auto-reverse function can be activated when
the moonroof is closed or tilted down by automatic operation when the ignition switch is
placed in the ON position or for a period of time
after the ignition switch is placed in the OFF
position.
Depending on the environment or driving
conditions, the auto-reverse function may
be activated if an impact or load similar to
something being caught in the moonroof
occurs.
WARNING
There are some small distances immediately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., inside
the vehicle before closing the moonroof.
When closing
If the control unit detects something caught in the
moonroof as it moves to the front, the moonroof
will immediately open backward.
When tilting down
If the control unit detects something caught in the
moonroof as it tilts down, the moonroof will immediately tilt up.
If the auto-reverse function malfunctions and repeats opening or tilting up the moonroof, keep
pushing the tilt down switch within 5 seconds
after it happens; the moonroof will fully close
gradually. Make sure nothing is caught in the
moonroof.
WARNING
● In an accident you could be thrown from
the vehicle through an open moonroof.
Always use seat belts and child
restraints.
● Do not allow anyone to stand up or
extend any portion of their body out of
the moonroof opening while the vehicle
is in motion or while the moonroof is
closing.
Instruments and controls 2-55
To close the sunshade:
CAUTION
● To fully close the sunshade, push the switch
2 toward the close position.
䊊
● Remove water drops, snow, ice or sand
from the moonroof before opening.
● Do not place heavy objects on the
moonroof or surrounding area.
WARNING
● To avoid personal injury, keep your
hands, fingers and head away from the
sunshade arm, the arm rail and sunshade inlet port.
Sunshade
Open and close the sunshade by sliding it forward or backward.
● Do not allow children near the rear sunshade system. They could be injured.
If the moonroof does not close
Have your NISSAN dealer check and repair the
moonroof.
LIC2228
PANORAMIC SUNSHADE (if so
equipped)
The panoramic sunshade operates when the ignition switch is in the ON position. The sunshade
switch is located near the roof console. When
opening or closing the sunshade the switch need
not be held.
To open the sunshade:
● To fully open the sunshade, push the switch
1 toward the open position.
䊊
2-56 Instruments and controls
● Do not place objects on or near the rear
sunshade. This could cause improper
operation or damage it.
● Do not pull or push the rear sunshade.
This could cause improper operation or
damage it.
CAUTION
● Do not place objects (such as newspapers, handkerchiefs, etc.) on the sunshade inlet port. Doing so may entangle
these objects in the sunshade when it is
extending or retracting, causing improper operation or damage to the
sunshade.
● Do not push the sunshade arm with
your hands, etc., as this may deform it.
Improper operation or damage to the
sunshade may result.
5. Sunshade drive cable will travel in the open
direction for .394 in. (10 mm) then reverse
direction and stop at the normal close position.
● Do not put any object into the sunshade
inlet port as this may result in improper
operation or damage the sunshade.
6. Release the sunshade close switch. Initialization procedure is complete.
● Do not hang any object on the arm rail
as this may result in improper operation
or damage the sunshade.
● Do not forcefully pull the sunshade. Doing so may elongate the sunshade. Improper operation or damage to the sunshade may result.
Restarting the sunshade switch
If the sunshade does not operate properly, perform the following procedure to initialize the sunshade operation system.
1. Switch the vehicle ignition to the ACCESSORY or RUN mode.
2. Press and hold the sunshade close switch.
If the moonroof does not operate properly after
performing the procedure above, have your vehicle checked by a NISSAN dealer.
WARNING
There are some small distances immediately before the closed position which
cannot be detected. Make sure that all of
the passengers have their hands, etc., inside the vehicle before closing the
sunshade.
Auto-reverse function (when closing
the sunshade)
The auto-reverse function can be activated when
the sunshade is closed by automatic operation
when the ignition switch is placed in the ON
position or for a period of time after the ignition
switch is placed in the OFF position.
Depending on the environment or driving
conditions, the auto-reverse function may
be activated if an impact or load similar to
something being caught in the sunshade
occurs.
3. Sunshade will begin moving towards the
close position only while the switch is continually pressed. (this disables the obstacle
detection).
4. Sunshade will stop for about 4 seconds.
Instruments and controls 2-57
INTERIOR LIGHT
NOTE:
The footwell lights and step lights illuminate when the driver and passenger doors
are open regardless of the interior light
switch position. These lights will turn off
automatically after a period of time while
doors are open to prevent the battery from
becoming discharged.
CAUTION
Do not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.
LIC2302
1 is pressed, the footwell
When the ON switch 䊊
lights (if so equipped), step lights (if so
equipped), map lights and rear personal lights
will automatically turn on and stay on for a period
of time when:
● The doors are unlocked by the Intelligent
Key, a key or the request switch (if so
equipped) while all doors are closed and the
ignition switch is in the OFF position.
● When individually pushed.
2 is pushed, the interior
When the OFF switch 䊊
lights do not illuminate.
2-58 Instruments and controls
LIC2303
CONSOLE LIGHT
The console light will turn on whenever the parking lights or headlights are illuminated.
The console light brightness can be adjusted
with the illumination brightness control.
PERSONAL LIGHTS
MAP LIGHTS
CARGO LIGHT
LIC1413
LIC2304
SIC2063A
To turn on the personal lights, press and release
1 .
the switch 䊊
Push the button to turn the map lights on. To turn
them off, press the button again.
The cargo light on the overhead trim has a threeposition switch. To operate, push the switch to
the desired position.
To turn the personal lights off, press and release
1 .
the switch 䊊
CAUTION
Do not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.
1
䊊
2
䊊
3
䊊
ON: The light is illuminated.
DOOR: The light illuminates when the liftgate is opened. The light turns off when the
liftgate is closed.
OFF: The light does not illuminate regardless
of liftgate position or lock status.
Instruments and controls 2-59
HOMELINK® UNIVERSAL
TRANSCEIVER (if so equipped)
CAUTION
Do not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.
The HomeLink® Universal Transceiver provides
a convenient way to consolidate the functions of
up to three individual hand-held transmitters into
one built-in device.
HomeLink® Universal Transceiver:
● Will operate most Radio Frequency devices
such as garage doors, gates, home and office lighting, entry door locks and security
systems.
● Is powered by your vehicle’s battery. No
separate batteries are required. If the vehicle’s battery is discharged or is disconnected, HomeLink® will retain all programming.
When the HomeLink® Universal Transceiver is programmed, retain the original
transmitter for future programming procedures (Example: new vehicle purchases).
Upon sale of the vehicle, the programmed
HomeLink® Universal Transceiver buttons
should be erased for security purposes. For
additional information, refer to “Programming HomeLink®” in this section.
2-60 Instruments and controls
WARNING
● Do not use the HomeLink® Universal
Transceiver with any garage door
opener that lacks safety stop and reverse features as required by federal
safety standards. (These standards became effective for opener models
manufactured after April 1, 1982). A garage door opener which cannot detect
an object in the path of a closing garage
door and then automatically stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features increases the risk of serious injury or
death.
● During the programming procedure
your garage door or security gate will
open and close (if the transmitter is
within range). Make sure that people or
objects are clear of the garage door,
gate, etc. that you are programming.
● Your vehicle’s engine should be turned
off while programming the HomeLink®
Universal Transceiver.
PROGRAMMING HOMELINK®
If you have any questions or are having difficulty
programming your HomeLink® buttons, refer to
the HomeLink® web site at: www.homelink.com
or call 1-800-355-3515.
NOTE:
Place the ignition switch in the ACC position when programming HomeLink®. It is
also recommended that a new battery be
placed in the hand-held transmitter of the
device being programmed to HomeLink®
for quicker programming and accurate
transmission of the radio-frequency.
1. Position the end of your hand-held transmitter 1–3 in (2–8 cm) away from the
HomeLink®
surface,
keeping
the
1 in view.
HomeLink® indicator light 䊊
LIC2365
LIC2366
2. Using both hands, simultaneously press and
hold the desired HomeLink® button and
hand-held transmitter button. DO NOT re1
lease until the HomeLink® indicator light 䊊
flashes slowly and then rapidly. When the
indicator light flashes rapidly, both buttons
may be released. (The rapid flashing indicates successful programming.)
3. Press and hold the programmed
HomeLink® button and observe the indicator light.
1
is
● If
the
indicator
light
䊊
solid/continuous, programming is
complete and your device should activate when the HomeLink® button is
pressed and released.
1 blinks rapidly for
● If the indicator light 䊊
2 seconds and then turns to a
solid/continuous light, continue
with Steps 4-6 for a rolling code device.
A second person may make the following
steps easier. Use a ladder or other device.
Do not stand on your vehicle to perform
the next steps.
NOTE:
Some devices may require you to replace
Step 2 with the cycling procedure noted in
“Programming HomeLink® for Canadian
customers and gate openers” in this section.
Instruments and controls 2-61
4. At the receiver located on the garage door
opener motor in the garage, locate the
“learn” or “smart” button (the name and color
of the button may vary by manufacturer but it
is usually located near where the hanging
antenna wire is attached to the unit). If there
is difficulty locating the button, reference the
garage door opener’s manual.
5. Press and release the “learn” or “smart” button.
6. Return to the vehicle and firmly press and
hold the trained HomeLink® button for
2 seconds and release. Repeat the
“press/hold/release” sequence up to three
times to complete the training process.
HomeLink® should now activate your rolling
code equipped device.
7. If you have any questions or are having difficulty programming your HomeLink® buttons,
refer to the HomeLink® web site at:
www.homelink.com or call 1-800-355-3515.
PROGRAMMING HOMELINK® FOR
CANADIAN CUSTOMERS AND
GATE OPENERS
Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several
seconds of transmission – which may not be long
enough for HomeLink® to pick up the signal
during training. Similar to this Canadian law,
some U.S. gate operators are designed to “timeout” in the same manner.
If you live in Canada or you are having difficulties
training a gate operator or garage door opener
by using the “Training” procedures, replace
“Programming HomeLink®” Step 2 with the following:
NOTE:
When programming a garage door opener,
etc., unplug the device during the “cycling”
process to prevent possible damage to the
garage door opener components.
1. For additional information, refer to “Programming HomeLink®” step 1 in this section.
2. Using both hands, simultaneously press and
hold the desired HomeLink® button and the
hand-held transmitter button. During training, your hand-held transmitter may auto-
2-62 Instruments and controls
matically stop transmitting. Continue to
press and hold the desired HomeLink® button while you press and re-press (“cycle”)
your hand-held transmitter every 2 seconds
until the frequency signal has been learned.
The HomeLink® indicator light will flash
slowly and then rapidly after several seconds
upon successful training. DO NOT release
until the HomeLink® indicator light flashes
slowly and then rapidly. When the indicator
light flashes rapidly, both buttons may be
released. The rapid flashing indicates successful training.
Proceed with “Programming HomeLink®”
step 3 to complete.
If the device was unplugged during the programming procedure, remember to plug it
back in when programming is completed.
OPERATING THE HOMELINK®
UNIVERSAL TRANSCEIVER
The HomeLink® Universal Transceiver, after it is
programmed, can be used to activate the programmed device. To operate, simply press and
release
the
appropriate
programmed
HomeLink® Universal Transceiver button. The
amber indicator light will illuminate while the signal is being transmitted.
For convenience, the hand-held transmitter of the
device may also be used at any time.
PROGRAMMING TROUBLEDIAGNOSIS
CLEARING THE PROGRAMMED
INFORMATION
If the HomeLink® does not quickly learn the
hand-held transmitter information:
The following procedure clears the programmed
information from both buttons. Individual buttons
cannot be cleared. However, individual buttons
can be reprogrammed. For additional information, refer to “Reprogramming a single
HomeLink® button” in this section.
● replace the hand-held transmitter batteries
with new batteries.
● position the hand-held transmitter with its
battery area facing away from the
HomeLink® surface.
● press and hold both the HomeLink® and
hand-held transmitter buttons without interruption.
To clear all programming:
1. Press and hold the two outer HomeLink®
buttons until the indicator light begins to
flash in approximately 10 seconds. Do not
hold for longer than 20 seconds.
● position the hand-held transmitter 1 - 3 in
(26 - 76 mm) away from the HomeLink®
surface. Hold the transmitter in that position
for up to 15 seconds. If HomeLink® is not
programmed within that time, try holding the
transmitter in another position – keeping the
indicator light in view at all times.
HomeLink® is now in the programming mode
and can be programmed at any time beginning
with “Programming HomeLink®” - Step 1.
If you have any questions or are having difficulty
programming your HomeLink® buttons, refer to
the HomeLink® web site at: www.homelink.com
or call 1-800-355-3515.
To reprogram a HomeLink® Universal Transceiver button, complete the following:
2. Release both buttons.
REPROGRAMMING A SINGLE
HOMELINK® BUTTON
1. Press and hold the desired HomeLink® button. DO NOT release the button.
2. The indicator light will begin to flash after
20 seconds. Without releasing the
HomeLink® button, proceed with “Programming HomeLink®” - Step 1.
For questions or comments, contact HomeLink®
at: www.homelink.com or 1–800–355–3515
(except Mexico).
The HomeLink® Universal Transceiver button
has now been reprogrammed. The new device
can be activated by pushing the HomeLink®
button that was just programmed. This procedure
will not affect any other programmed HomeLink®
buttons.
IF YOUR VEHICLE IS STOLEN
If your vehicle is stolen, you should change the
codes of any non-rolling code device that has
been programmed into HomeLink®. Consult the
Owner’s Manual of each device or call the manufacturer or dealer of those devices for additional
information.
When your vehicle is recovered, you will
need to reprogram the HomeLink® Universal Transceiver with your new transmitter
information.
Instruments and controls 2-63
FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
NOTE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For Canada:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that
may cause undesired operation of the device.
2-64 Instruments and controls
MEMO
Instruments and controls 2-65
3 Pre-driving checks and adjustments
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
NISSAN Intelligent Key® . . . . . . . . . . . . . . . . . . . . . . . . 3-2
NISSAN Vehicle Immobilizer System keys . . . . . . . . . 3-4
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-6
Locking with power door lock switch . . . . . . . . . . . . . 3-6
Automatic door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Child safety rear door lock . . . . . . . . . . . . . . . . . . . . . . . 3-7
NISSAN Intelligent Key® . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Operating range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Door locks/unlocks precaution . . . . . . . . . . . . . . . . . . 3-10
NISSAN Intelligent Key® Operation . . . . . . . . . . . . . 3-10
How to use the remote keyless entry
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 3-18
Remote Engine Start (if so equipped) . . . . . . . . . . . . . . . 3-20
Remote engine start operating range . . . . . . . . . . . . 3-20
Remote starting the vehicle . . . . . . . . . . . . . . . . . . . . . 3-20
Extending engine run time . . . . . . . . . . . . . . . . . . . . . . 3-21
Canceling a remote start . . . . . . . . . . . . . . . . . . . . . . . 3-21
Conditions the remote start will not work . . . . . . . . . 3-21
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Operating the manual liftgate
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Operating the power liftgate (if so equipped) . . . . . 3-23
Power liftgate main switch . . . . . . . . . . . . . . . . . . . . . . 3-26
Liftgate release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Liftgate position setting . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
Opening the fuel-filler door . . . . . . . . . . . . . . . . . . . . . 3-28
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Tilt/telescopic steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31
Manual operation (if so equipped) . . . . . . . . . . . . . . . 3-31
Automatic operation (if so equipped). . . . . . . . . . . . . 3-31
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32
Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
Rearview mirror (if so equipped). . . . . . . . . . . . . . . . . 3-33
Automatic anti-glare rearview mirror
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Automatic drive positioner (if so equipped) . . . . . . . . . . 3-36
Memory storage function . . . . . . . . . . . . . . . . . . . . . . . 3-36
Entry/exit function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-37
Setting memory function. . . . . . . . . . . . . . . . . . . . . . . . 3-38
System operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38
KEYS
LPD0350
Type A (if so equipped)
1.
2.
3.
Intelligent Key (2 sets)
Mechanical key
Key number plate (1 plate)
3-2 Pre-driving checks and adjustments
WPD0427
Type B (if so equipped)
NISSAN INTELLIGENT KEY®
Your vehicle can only be driven with the Intelligent
Keys which are registered to your vehicle’s Intelligent Key system components and NISSAN Vehicle Immobilizer System components. As many
as 4 Intelligent Keys can be registered and used
with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the
Intelligent Key system and NISSAN Vehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in
the Intelligent Key components when registering
new keys, be sure to take all Intelligent Keys that
you have to the NISSAN dealer.
LPD2052
Type C (if so equipped)
A key number plate is supplied with your keys.
Record the key number and keep it in a safe place
(such as your wallet), not in the vehicle. If you lose
your keys, see a NISSAN dealer for duplicates by
using the key number. NISSAN does not record
key numbers so it is very important to keep track
of your key number plate.
A key number is only necessary when you have
lost all keys and do not have one to duplicate
from. If you still have a key, your NISSAN dealer
can duplicate it.
CAUTION
Listed below are conditions or occurrences which will damage the Intelligent
Key:
● Do not allow the Intelligent Key, which
contains electrical components, to
come into contact with water or salt
water. This could affect the system
function.
If an Intelligent Key is lost or stolen,
NISSAN recommends erasing the ID code
of that Intelligent Key from the vehicle.
This may prevent the unauthorized use of
the Intelligent Key to operate the vehicle.
For information regarding the erasing
procedure, contact a NISSAN dealer.
● Do not drop the Intelligent Key.
● Do not strike the Intelligent Key sharply
against another object.
● Do not change or modify the Intelligent
Key.
● Wetting may damage the Intelligent
Key. If the Intelligent Key gets wet, immediately wipe until it is completely dry.
● Do not place the Intelligent Key for an
extended period in an area where temperatures exceed 140°F (60°C).
● Do not attach the Intelligent Key with a
key holder that contains a magnet.
● Do not place the Intelligent Key near
equipment that produces a magnetic
field, such as a TV, audio equipment and
personal computers.
SPA1951
Mechanical key
The Intelligent Key contains the mechanical key.
To remove the mechanical key, release the lock
knob on the back of the Intelligent Key.
To install the mechanical key, firmly insert it into
the Intelligent Key until the lock knob returns to
the lock position.
Use the mechanical key to lock or unlock the
driver’s door and glove box.
Pre-driving checks and adjustments 3-3
CAUTION
Always carry the mechanical key installed
in the Intelligent Key slot.
For additional information, refer to “Doors” in this
section and “Storage” in the “Instruments and
controls” section of this manual.
Valet hand-off
When you have to leave a key with a valet, give
them the Intelligent Key itself and keep the mechanical key with you to protect your belongings.
To prevent the glove box from being opened
during valet hand-off, follow the procedure below.
1. Remove the mechanical key from the Intelligent Key.
2. Lock the glove box with the mechanical key.
3. Hand the Intelligent Key to the valet and
keep the mechanical key with you.
For additional information, refer to “Storage” in
the “Instruments and controls” section of this
manual.
3-4 Pre-driving checks and adjustments
NISSAN VEHICLE IMMOBILIZER
SYSTEM KEYS
You can only drive your vehicle using the master
or valet keys which are registered to the NISSAN
Vehicle Immobilizer System components in your
vehicle. These keys have a transponder chip in
the key head.
The master key can be used for all the locks.
The valet key cannot be used for the glove box
lock.
To protect your belongings when you leave a key
with someone, give them the valet key only.
Never leave these keys in the vehicle.
Additional or replacement keys:
If you still have a key, the key number is not
necessary when you need extra NISSAN Vehicle
Immobilizer System keys. Your dealer can duplicate your existing key. As many as 4 NISSAN
Vehicle Immobilizer System keys can be used
with one vehicle. You should bring all NISSAN
Vehicle Immobilizer System keys that you have to
your NISSAN dealer for registration. This is because the registration process will erase the
memory of all key codes previously registered
into the NISSAN Vehicle Immobilizer System.
After the registration process, these components
will only recognize keys coded into the NISSAN
Vehicle Immobilizer System during registration.
Any key that is not given to your dealer at the time
of registration will no longer be able to start your
vehicle.
CAUTION
Do not allow the immobilizer system key,
which contains an electrical transponder,
to come into contact with water or salt
water. This could affect system function.
DOORS
When the doors are locked using one of the
following methods, the doors cannot be opened
using the inside or outside door handles. The
doors must be unlocked to open the doors.
Opening and closing windows
The driver’s door key operation allows you to
open and close windows equipped with automatic operation at the same time.
● To open the windows, turn the driver’s door
key toward the rear of the vehicle for longer
than 1 second after the door is unlocked.
WARNING
● Always have the doors locked while
driving. Along with the use of seat belts,
this provides greater safety in the event
of an accident by helping to prevent
persons from being thrown from the
vehicle. This also helps keep children
and others from unintentionally opening the doors, and will help keep out
intruders.
● Before opening any door, always look
for and avoid oncoming traffic.
● Do not leave children unattended inside
the vehicle. They could unknowingly activate switches or controls. Unattended
children could become involved in serious accidents.
● To close the windows, turn the driver’s door
key toward the front of the vehicle for longer
than 1 second after the door is locked.
Windows stop when the key cylinder is released.
LPD0461
Driver’s side
LOCKING WITH KEY
The power door lock system allows you to lock or
unlock all doors at the same time.
NOTE:
When the window lock button is pressed
the key will not operate the window open or
close function.
1 of the vehicle
Turning the key toward the front 䊊
locks all doors.
2 of the
Turning the key one time toward the rear 䊊
vehicle unlocks that door. From that position,
3 (where the key can
returning the key to neutral 䊊
only be removed and inserted) and turning it
4 within 5 seconds untoward the rear again 䊊
locks all doors.
Pre-driving checks and adjustments 3-5
Lockout protection
When the power door lock switch is moved to the
lock position and any door is open, all doors will
lock and unlock automatically. With the Intelligent
Key left in the vehicle and any door open, all doors
will unlock automatically and a chime will sound
after the door is closed.
These functions help to prevent the Intelligent
Key from being accidentally locked inside the
vehicle.
AUTOMATIC DOOR LOCKS
LPD2092
Inside lock
LOCKING WITH INSIDE LOCK
KNOB
To lock the door without the key, move the inside
1 , then close the
lock knob to the lock position 䊊
door.
To unlock the door without the key, move the
2 .
inside lock knob to the unlock position 䊊
LPD2093
LOCKING WITH POWER DOOR
LOCK SWITCH
To lock all the doors without a key, push the door
lock switch (driver’s or front passenger’s side) to
1 . When locking the door this
the lock position 䊊
way, be certain not to leave the key inside the
vehicle.
To unlock all the doors without a key, push the
door lock switch (driver’s or front passenger’s
2 .
side) to the unlock position 䊊
● All doors lock automatically when the vehicle
speed reaches 15 MPH (24 km/h).
● All doors unlock automatically when the ignition is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform
the following procedure:
1. Close all doors.
2. Place the ignition switch in the ON position.
3. Within 20 seconds of performing Step 2,
push and hold the power door lock switch to
position (UNLOCK) for more than
the
5 seconds.
3-6 Pre-driving checks and adjustments
NISSAN INTELLIGENT KEY®
4. When activated, the hazard indicator will
flash twice. When deactivated, the hazard
indicator will flash once.
WARNING
● Radio waves could adversely affect
electric medical equipment. Those who
use a pacemaker should contact the
electric medical equipment manufacturer for the possible influences before
use.
5. The ignition switch must be placed in the
OFF and ON position again between each
setting change.
When the automatic door unlock system is deactivated, the doors do not unlock when the ignition
switch is placed in the OFF position. To unlock
the door manually, use the inside lock knob or the
power door lock switch (driver’s or front passenger’s side).
NOTE:
The automatic door unlock function can be
changed using the Vehicle Settings in the
vehicle information display. The “Auto
Door Unlock” choices are:
● Off
● IGN OFF
● Shift into P
LPD2049
CHILD SAFETY REAR DOOR LOCK
Child safety locks help prevent the rear doors
from being opened accidentally, especially when
small children are in the vehicle.
The child safety lock levers are located on the
edge of the rear doors.
When the lever is in the LOCK position, the
door can be opened only from the outside.
● The Intelligent Key transmits radio
waves when the buttons are pressed.
The FAA advises the radio waves may
affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make
sure the buttons are not operated unintentionally when the unit is stored for a
flight.
The Intelligent Key system can operate all the
door locks using the remote control function or
pushing the request switch on the vehicle without
taking the key out from a pocket or purse. The
operating environment and/or conditions may affect the Intelligent Key system operation.
Be sure to read the following before using the
Intelligent Key system.
Pre-driving checks and adjustments 3-7
CAUTION
● Be sure to carry the Intelligent Key with
you when operating the vehicle.
● Never leave the Intelligent Key in the
vehicle when you leave the vehicle.
The Intelligent Key is always communicating with
the vehicle as it receives radio waves. The Intelligent Key system transmits weak radio waves.
Environmental conditions may interfere with the
operation of the Intelligent Key system under the
following operating conditions:
● When operating near a location where
strong radio waves are transmitted, such as
a TV tower, power station and broadcasting
station.
● When in possession of wireless equipment,
such as a cellular telephone, transceiver,
and CB radio.
● When the Intelligent Key is in contact with or
covered by metallic materials.
● When any type of radio wave remote control
is used nearby.
● When the Intelligent Key is placed near an
electric appliance such as a personal computer.
3-8 Pre-driving checks and adjustments
● When the vehicle is parked near a parking
meter.
In such cases, correct the operating conditions
before using the Intelligent Key function or use
the mechanical key.
Although the life of the battery varies depending
on the operating conditions, the battery’s life is
approximately 2 years. If the battery is discharged, replace it with a new one.
CAUTION
Listed below are conditions or occurrences which will damage the Intelligent
Key:
● Do not allow the Intelligent Key, which
contains electrical components, to
come into contact with water or salt
water. This could affect the system
function.
When the Intelligent Key battery is low, an indicator illuminates in the Vehicle Information Display. For additional information, refer to “Vehicle
Information Display” in the “Instruments and controls” section of this manual.
● Do not drop the Intelligent Key.
Since the Intelligent Key is continuously receiving
radio waves, if the key is left near equipment
which transmits strong radio waves, such as signals from a TV and personal computer, the battery life may become shorter.
● Wetting may damage the Intelligent
Key. If the Intelligent Key gets wet, immediately wipe until it is completely dry.
For additional information regarding replacement
of a battery, refer to “Battery replacement” in the
“Maintenance and do-it-yourself” section of this
manual.
As many as 4 Intelligent Keys can be registered
and used with one vehicle. For information about
the purchase and use of additional Intelligent
Keys, contact a NISSAN dealer.
● Do not strike the Intelligent Key sharply
against another object.
● Do not change or modify the Intelligent
Key.
● Do not place the Intelligent Key for an
extended period in an area where temperatures exceed 140°F (60°C).
● Do not attach the Intelligent Key with a
key holder that contains a magnet.
● Do not place the Intelligent Key near
equipment that produces a magnetic
field, such as a TV, audio equipment and
personal computers.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating location, the Intelligent Key operating range
becomes narrower, and the Intelligent Key may
not function properly.
If an Intelligent Key is lost or stolen, NISSAN
recommends erasing the ID code of that Intelligent Key from the vehicle. This may prevent the
unauthorized use of the Intelligent Key to operate
the vehicle. For information regarding the erasing
procedure, contact a NISSAN dealer.
The operating range is within 31.5 in (80 cm)
1 .
from each request switch 䊊
If the Intelligent Key is too close to the door glass,
handle or rear bumper, the request switches may
not function.
When the Intelligent Key is within the operating
range, it is possible for anyone, even someone
who does not carry the Intelligent Key, to push the
request switch to lock/unlock the doors.
LPD2103
OPERATING RANGE
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
1 .
operating range from the request switch 䊊
Pre-driving checks and adjustments 3-9
● To prevent the Intelligent Key from being left
inside the vehicle, make sure you carry the
Intelligent Key with you and then lock the
doors.
● Do not pull the door handle before pushing
the door handle request switch. The door
will be unlocked but will not open. Release
the door handle once and pull it again to
open the door.
WPD0375
DOOR LOCKS/UNLOCKS
PRECAUTION
● Do not push the door handle request switch
with the Intelligent Key held in your hand as
illustrated. The close distance to the door
handle will cause the Intelligent Key system
to have difficulty recognizing that the Intelligent Key is outside the vehicle.
● After locking with the door handle request
switch, verify the doors are securely locked
by testing them.
3-10 Pre-driving checks and adjustments
LPD2104
NISSAN INTELLIGENT KEY®
OPERATION
You can lock or unlock the doors without taking
the Intelligent Key out of your pocket or bag.
When you carry the Intelligent Key with you, you
can lock or unlock all doors by pushing the door
handle request switch within the range of operation.
● Doors do not lock by pushing the door
handle request switch while any door is
open. However, doors lock with the mechanical key even if any door is open.
● Doors do not lock with the door handle
request switch with the Intelligent Key inside
the vehicle and a beep sounds to warn you.
However, when an Intelligent Key is inside
the vehicle, doors can be locked with another Intelligent Key.
CAUTION
LPD2105
Locking doors
1. Move the shift lever to the P (Park) position,
place the ignition switch in the LOCK position and make sure you carry the Intelligent
Key with you.
2. Close all doors.
3. Push any door handle request switch while
carrying the Intelligent Key with you.
4. All doors and the rear liftgate will lock.
5. The hazard warning lights flash twice and
the outside buzzer sounds once.
LPD2106
NOTE:
● Request switches for all doors and liftgate can be deactivated when the I-Key
Door Lock setting is switched to OFF in
the Vehicle Settings of the vehicle information display. For additional information, refer to “Vehicle information
display” in the “Instruments and controls” section of this manual.
● Doors lock with the door handle request
switch while the ignition switch is not in the
LOCK position.
● After locking the doors using the request switch, make sure that the doors
have been securely locked by operating
the door handles or the rear liftgate
opener switch.
● When locking the doors using the request switch, make sure to have the
Intelligent Key in your possession before operating the request switch to
prevent the Intelligent Key from being
left in the vehicle.
● The request switch is operational only
when the Intelligent Key has been detected by the Intelligent Key system.
Pre-driving checks and adjustments 3-11
Lockout protection
CAUTION
To prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection
is equipped with the Intelligent Key system.
The lockout protection may not function
under the following conditions:
When the driver’s side door is open, the doors
are locked, and then the Intelligent Key is put
inside the vehicle and all the doors are closed;
the lock will automatically unlock and the door
buzzer sounds.
● When the Intelligent Key is placed inside the glove box or a storage bin.
NOTE:
The doors may not lock when the Intelligent Key is in the same hand that is operating the request switch to lock the door.
Put the Intelligent Key in a purse, pocket or
your other hand.
● When the Intelligent Key is placed on
top of the instrument panel.
● When the Intelligent Key is placed inside the door pockets.
● When the Intelligent Key is placed inside or near metallic materials.
LPD2105
Unlocking doors
1. Carry the Intelligent Key.
2. Push the door handle request switch.
3. The hazard warning lights flash once and the
outside buzzer sounds once.
4. Push the door handle request switch again
within 1 minute to unlock all doors.
For power liftgate opening:
1. Carry the Intelligent Key.
2. Press the power liftgate request switch.
3-12 Pre-driving checks and adjustments
ing the door handle, push the door handle request switch to unlock the door.
HOW TO USE THE REMOTE
KEYLESS ENTRY FUNCTION
All doors will be locked automatically unless one
of the following operations is performed within
1 minute after pushing the request switch.
The remote keyless entry function can operate all
door locks using the remote keyless function of
the Intelligent Key. The remote keyless function
can operate at a distance of 33 ft (10 m) away
from the vehicle. The operating distance depends upon the conditions around the vehicle.
● Opening any door.
● Pushing the ignition switch.
The interior light timer illuminates for a period of
time when a door is unlocked and the room light
switch is in the DOOR position.
LPD2106
NOTE:
Request switches for all doors and liftgate
can be deactivated when the I-Key Door
Lock setting is switched to OFF in the Vehicle Settings of the vehicle information
display. For additional information, refer to
“Vehicle information display” in the “Instruments and controls” section of this
manual.
If a door handle is pulled while unlocking the
doors, that door may not be unlocked. Returning
the door handle to its original position will unlock
the door. If the door does not unlock after return-
The interior light can be turned off without waiting
by performing one of the following operations:
● Placing the ignition switch in the ON position.
● Locking the doors with the remote control.
● Switching the room light switch to the OFF
position.
● Switching the Auto Room Lamp to the OFF
position in Vehicle Settings of the vehicle
information display. For additional information, refer to “Vehicle information display” in
the “Instruments and controls” section of this
manual.
The remote keyless entry function will not function under the following conditions:
● When the Intelligent Key is not within the
operational range.
● When the doors or the rear liftgate are open
or not closed securely.
● When the Intelligent Key battery is discharged.
CAUTION
When locking the doors using the Intelligent Key, be sure not to leave the key in
the vehicle.
Pre-driving checks and adjustments 3-13
CAUTION
After locking the doors using the Intelligent Key, be sure that the doors have been
securely locked by operating the door
handles.
WPD0359
Locking doors
WPD0360
Unlocking doors
1. Place the ignition switch in the LOCK position.
1. Press the
Key.
2. Close all doors.
2. The hazard warning lights flash once.
3. Press the
Key.
button on the Intelligent
4. The hazard warning lights flash twice and
the horn beeps once.
5. All doors will be locked.
3-14 Pre-driving checks and adjustments
button on the Intelligent
button again within 5 sec3. Press the
onds to unlock all doors.
NOTE:
● Switching the Auto Room Lamp to the OFF
position in Vehicle Settings of the vehicle
information display. For additional information, refer to “Vehicle information display” in
the “Instruments and controls” section of this
manual.
The unlocking operation can be changed in
Selective door unlock in the Vehicle Settings of the vehicle information display. For
additional information, refer to “Vehicle information display” in the “Instruments and
controls” section of this manual.
Opening windows
All doors will be locked automatically unless one
of the following operations is performed within
button:
1 minute after pressing the
The Intelligent Key allows you to simultaneously
open windows equipped with automatic operation.
● Opening any doors.
● Pushing the ignition switch.
The interior light illuminates for a period of time
when a door is unlocked and the room light
switch is in the DOOR position.
The light can be turned off without waiting by
performing one of the following operations:
● Placing the ignition switch in the ON position.
● Locking the doors with the Intelligent Key.
● Switching the room light switch to the OFF
position.
but● To open the windows, press the
ton on the Intelligent Key for longer than
3 seconds after all doors are unlocked.
The door windows will open while pressing
button on the Intelligent Key.
the
The door windows cannot be closed by
using the Intelligent Key.
WPD0414
Releasing the rear liftgate (if so
equipped)
The rear liftgate can be opened and closed by
performing the following:
button for longer than
● Press the
0.5 seconds to open the rear liftgate.
button again for longer than
● Press the
0.5 seconds to close the rear liftgate.
button is pressed during the
When the
open or close process the liftgate will reverse.
Pre-driving checks and adjustments 3-15
The panic alarm stops when:
● It has run for a period of time, or
● Any button is pressed on the Intelligent Key.
● The request switch on the driver or passenger door is pushed and the Intelligent Key is
in range of the door handle.
Linking the key fob to automatic drive
positioner memory (if so equipped)
If the vehicle is equipped with automatic drive
positioner, the key fob can be linked to a memory
setting.
LPD2271
Using the panic alarm
If you are near your vehicle and feel threatened,
you may activate the panic alarm to call attention
button on the
by pressing and holding the
Intelligent Key for longer than 0.5 seconds.
The panic alarm and headlights will stay on for a
period of time.
3-16 Pre-driving checks and adjustments
For additional information, refer to “Automatic
drive positioner” in this section.
WPD0362
Answer back horn feature
If desired, the answer back horn feature can be
deactivated using the Intelligent Key. When it is
button is
deactivated and the LOCK
pushed, the hazard indicator lights flash twice.
button is pushed, neiWhen the UNLOCK
ther the hazard indicator lights nor the horn operates.
NOTE:
WARNING SIGNALS
If you change the answer back horn and
light flash feature with the Intelligent Key,
the vehicle information display screen will
show the current mode after the ignition
switch has been cycled from the OFF to the
ON position. The vehicle information display screen can also be used to change the
answer back horn mode. For additional information, refer to “Answer back horn” in
the “Instruments and controls” section of
this manual.
To deactivate: Press and hold the
and
buttons for at least 2 seconds.
The hazard warning lights will flash three times to
confirm that the answer back horn feature has
been deactivated.
To help prevent the vehicle from moving unexpectedly by erroneous operation of the Intelligent
Key or to help prevent the vehicle from being
stolen, a chime or buzzer sounds from inside and
outside the vehicle and a warning is displayed in
the instrument panel.
When a chime or beep sounds or a warning is
displayed, be sure to check the vehicle and the
Intelligent Key.
For additional information, refer to the “Troubleshooting guide” in this section and “Vehicle information display” in the “Instruments and controls”
section of this manual.
To activate: Press and hold the
and
buttons for at least 2 seconds once
more.
The hazard warning lights will flash once and the
horn will sound once to confirm that the horn
beep feature has been reactivated.
Deactivating the horn beep feature does not silence the horn if the alarm is triggered.
Pre-driving checks and adjustments 3-17
TROUBLESHOOTING GUIDE
Verify the location of all Intelligent Keys that are
programmed for the vehicle. If another Intelligent
Key is in range or inside the vehicle, the vehicle
system may respond differently than expected.
Symptom
The Shift to Park warning appears on the
When stopping the engine
display and the inside warning chime
sounds continuously.
When shifting the shift lever to the P (Park) The Push ignition to OFF warning appears
position
in the display.
The Door Open warning appears on the
When opening the driver’s door to get out
display and the inside warning chime
of the vehicle
sounds continuously.
The No Key Detected warning appears on
the display, the outside chime sounds 3
times and the inside warning chime sounds
When closing the door after getting out of
for approximately 3 seconds.
the vehicle
The Shift to Park warning appears on the
display and the outside chime sounds
continuously.
When closing the door with the inside lock The outside chime sounds for approximately
knob turned to LOCK
3 seconds and all the doors unlock.
When pushing the door handle request
The outside chime sounds for approximately
switch or the LOCK button on the Intelli2 seconds.
gent Key to lock the door
3-18 Pre-driving checks and adjustments
Possible Cause
Remedy
Move the shift lever to the P (Park) position.
The shift lever is not in the P (Park) position.
The ignition switch is in the ACC or ON
position.
Place the ignition switch in the OFF
position.
The ignition switch is in the ACC or ON
position.
Place the ignition switch in the OFF
position.
The ignition switch is in the ACC or ON
position.
Place the ignition switch in the OFF
position.
The ignition switch is in the ACC position
and the shift lever is not in the P (Park)
position.
Move the shift lever to the P (Park) position
and place the ignition switch in the OFF
position.
The Intelligent Key is inside the vehicle.
Carry the Intelligent Key with you.
The Intelligent Key is inside the vehicle.
Carry the Intelligent Key with you.
Symptom
Possible Cause
The Intelligent Key battery indicator appears
The battery charge is low.
on the display.
When pushing the ignition switch to start
the engine
When pushing the ignition switch
The No Key Detected warning appears on
the display, the outside chime sounds 3
times and the inside warning chime sounds
for approximately 3 seconds.
The Intelligent Key system warning light in
the meter illuminates in yellow.
Remedy
Replace the battery with a new one. For
additional information, refer to “Battery replacement” in the “Maintenance and do-ityourself” section of this manual.
The Intelligent Key is not in the vehicle.
Carry the Intelligent Key with you.
It warns of a malfunction with the Intelligent
Key system.
Contact a NISSAN dealer.
Pre-driving checks and adjustments 3-19
REMOTE ENGINE START (if so
equipped)
Laws in some local communities may restrict the
use of remote starters. For example, some laws
require a person using remote start to have the
vehicle in view. Check local regulations for any
requirements.
Other conditions may affect the function of the
Remote Engine Start feature. For additional information, refer to “Conditions the remote start will
not work” in this section.
Other conditions can affect the performance of
the Intelligent Key transmitter. For additional information, refer to “NISSAN Intelligent Key®” in
this section.
LPD2060
The
button will be on the NISSAN Intelligent Key® if the vehicle has remote engine start.
This feature allows the engine to start from outside the vehicle.
The following features may be affected when the
remote start feature is used:
● Vehicles with manual or automatic climate
control systems will default to the last used
heating or cooling mode.
● Vehicles equipped with heated seats may
have this feature come on during a remote
start. For additional information, refer to
“Heated seats” in the “Instruments and controls” section.
3-20 Pre-driving checks and adjustments
REMOTE ENGINE START
OPERATING RANGE
The remote engine start function can only be
used when the Intelligent Key is within the specified operating range from the vehicle.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating location, the Intelligent Key operating range
becomes narrower, and the Intelligent Key may
not function properly.
The remote engine start operating range is approximately 197 ft (60 m) from the vehicle.
REMOTE STARTING THE VEHICLE
To use the remote start feature to start the engine
perform the following:
1. Aim the Intelligent Key at the vehicle.
2. Press the
doors.
LOCK button to lock all
3. Within 5 seconds press and hold the
remote start button until the turn signal lights
flash and the tail lamps turn on. If the vehicle
is not within view press and hold the
remote start button for at least 2 seconds.
The following events will occur when the engine
starts:
● The parking lights will turn on and remain on
as long as the engine is running.
● The doors will be locked and the climate
control system may come on.
● The engine will continue to run for 10 minutes. Repeat the steps to extend the time for
an additional ten minutes. For additional information, refer to “Extending engine run
time” in this section.
Depress and hold the brake then press the pushbutton ignition switch to the ON position before
driving. For additional information, refer to “Driving the vehicle” in the “Starting and driving” section of this manual.
EXTENDING ENGINE RUN TIME
The remote start feature can be extended one
time by performing the steps listed in “Remote
starting the vehicle” in this section. Run time will
be calculated as follows:
● The first 10 minute run time will start when
the remote start function is performed.
CANCELING A REMOTE START
To cancel a remote start, perform one of the
following:
● Aim the Intelligent Key at the vehicle and
until the parking lights turn off.
press
● Turn on the hazard warning flashers.
● Cycle the ignition switch ON and then OFF.
● The extended engine run time has expired.
● The first 10 minute timer has expired.
● The engine hood has been opened.
● The second 10 minutes will start immediately when the remote start function is performed again. For example, if the engine has
been running for 5 minutes, and 10 minutes
are added, the engine will run for a total of
15 minutes.
● The shift lever is moved out of park.
● Extending engine run time will bring you to
the 2 remote start limit.
● The ignition switch is pushed with an Intelligent Key in the vehicle but the brake pedal is
not depressed.
A maximum of 2 remote starts, or a single start
with an extension, are allowed between ignition
cycles.
The ignition switch must be cycled to the ON
position and then back to the OFF position before the remote start procedure can be used
again.
● The alarm sounds due to illegal entry into the
vehicle.
● The ignition switch is pushed without an
Intelligent Key in the vehicle.
CONDITIONS THE REMOTE START
WILL NOT WORK
The remote start will not operate if any of the
following conditions are present:
● The ignition switch is placed in the ON position.
● The hood is not securely closed.
● The hazard warning lights are on.
● The engine is still running. The engine must
be completely stopped. Wait at least 6 seconds if the engine goes from running to off.
This is not applicable when extending engine run time.
is not pressed
● The remote start button
and held for at least 2 seconds.
is not pressed
● The remote start button
and held within 5 seconds of pressing the
lock button.
● The brake is pressed.
● The doors are not closed and locked.
● The liftgate or back door is open.
remains
● The I–Key Indicator Light
solid in the vehicle information display.
Pre-driving checks and adjustments 3-21
HOOD
● The alarm sounds due to illegal entry into the
vehicle.
● Two remote vehicle starts, or a single remote
start with an extension, have already been
used.
● The vehicle is not in P (Park).
● There is a detected registered key already
inside of the vehicle.
● The Remote Start function has been
switched to the OFF position in Vehicle Settings of the vehicle information display. For
additional information, refer to “Vehicle information display” in the “Instruments and controls” section of this manual.
The remote engine start may display a warning or
indicator in the vehicle information display. For
additional information and an explanation of the
warning or indicator, refer to “Vehicle information
display” in the “Instruments and controls” section
of this manual.
LPD2107
1
䊊
2
䊊
Pull the hood lock release handle located
below the driver side instrument panel. The
hood will spring up slightly.
Push the lever at the front of the hood to the
side as illustrated with your fingertips and
raise the hood.
When closing the hood, lower it slowly and make
sure it locks into place.
3-22 Pre-driving checks and adjustments
WARNING
● Make sure the hood is completely
closed and latched before driving. Failure to do so could cause the hood to fly
open and result in an accident.
● If you see steam or smoke coming from
the engine compartment, to avoid injury
do not open the hood.
LIFTGATE
OPERATING THE POWER LIFTGATE
(if so equipped)
WARNING
● Always be sure the liftgate has been
closed securely to prevent it from opening while driving.
WARNING
● Make sure that all passengers have
their hands, etc., inside the vehicle before closing the liftgate.
● Do not drive with the liftgate open. This
could allow dangerous exhaust gases
to be drawn into the vehicle. For additional information, refer to “Exhaust
gas (carbon monoxide)” in the “Starting
and driving” section of this manual.
● Do not leave children unattended inside
the vehicle. They could unknowingly activate switches or controls. Unattended
children could become involved in serious accidents.
● Always be sure that hands and feet are
clear of the door frame to avoid injury
while closing the liftgate.
● Do not leave children unattended inside
the vehicle. They could unknowingly activate switches or controls. Unattended
children could become involved in serious accidents.
LPD2274
OPERATING THE MANUAL
LIFTGATE (if so equipped)
The power door lock system allows you to lock or
unlock all doors including the liftgate simultaneously.
A
To open the liftgate, press the request switch 䊊
and pull up on the handle.
To close, lower and push the liftgate down securely.
Pre-driving checks and adjustments 3-23
A can only be
● The switch on the liftgate 䊊
used to open the liftgate if the MAIN switch
(located in the Instrument panel) is in the ON
position.
A warning chime will sound if the shift lever is
moved out of P (Park) during a power open
operation.
LPD2212
Instrument panel switch
NOTE:
To open, close or reverse the power liftgate,
the shift lever must be in P (Park). Also, the
power liftgate will not operate if battery
voltage is low.
Power Open:
The power liftgate automatically moves from the fully
closed position to the fully open position in approximately 5 – 8 seconds. The power open feature can
be activated by the switch on the key fob, the instrument panel switch and the liftgate open switch. The
hazard lights flash and a chime sounds to indicate
the power open sequence has been started.
3-24 Pre-driving checks and adjustments
LPD2109
Liftgate opener switch
● When the vehicle is locked, the liftgate can
be opened by the instrument panel switch,
A (with
key fob and liftgate opener switch 䊊
key fob in liftgate range). The liftgate will
individually unlock and open. Once the liftgate is closed, the vehicle will remain in the
unlock status.
● The key fob button must be held for 0.5 seconds before the liftgate opens.
● The liftgate must be unlocked to open it with
A and without
the liftgate opener switch 䊊
key fob in liftgate range.
A is activated
● If the liftgate opener switch 䊊
while the cinching motor is engaged, the
cinching motor will disengage and release
the latch.
● The key fob button must be held for 0.5 seconds before the liftgate closes.
B can only be
● The switch on the liftgate 䊊
used to close the liftgate if the power liftgate
main switch is in the ON position.
LPD2275
Power Close:
The power liftgate automatically moves from the
fully open position to the secondary position.
When the liftgate reaches the secondary position, the cinching motor engages and pulls the
liftgate to its primary latch position. Power close
takes approximately 7 – 10 seconds. The power
close feature can be activated by the switch on
the key fob, the instrument panel and the liftgate
B . The hazard lights flash and a chime
switch 䊊
sounds to indicate the power close sequence
has been started.
NOTE:
If the pinch strip is damaged or removed,
the power close function will not operate.
WARNING
There are some small distances immediately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., inside
the vehicle before closing the liftgate.
Reverse:
The power liftgate will reverse direction immediately during power open or power close if the key
B is
fob, instrument panel or liftgate switch 䊊
pushed. A chime will sound to announce the
reversal.
Auto Reverse:
If an obstacle is detected during power open or
power close, a warning chime will sound and the
liftgate will reverse direction and return to the full
open or full close position. If a second obstacle is
detected, the liftgate motion will stop and the
liftgate will enter manual mode.
A pinch strip is mounted on each side of the
liftgate. If an obstacle is detected by a pinch strip
during power close, the liftgate will reverse direction and return to the full open position.
Pre-driving checks and adjustments 3-25
To open the liftgate manually, press the liftgate
A and lift the liftgate.
opener switch 䊊
To close, lower and push the liftgate down securely.
LPD2108
Manual Mode:
If power operation is not available, the liftgate
may be operated manually. Power operation may
not be available if the power liftgate main switch
is in the ON position, if multiple obstacles have
been detected in a single power cycle, or if
battery voltage is low.
A is pushed
If the power liftgate opener switch 䊊
during power open or close, the power operation
will be canceled and the liftgate can be operated
manually.
3-26 Pre-driving checks and adjustments
LPD2277
POWER LIFTGATE MAIN SWITCH
The power liftgate operation can be turned on or
off by the power liftgate main switch on the
instrument panel.
When the power liftgate main switch is pushed to
the OFF position, the power operation is not
available by the power liftgate switch on the
A or 䊊
B.
liftgate and liftgate opener switch 䊊
Power operation is available when in the OFF
position by the instrument panel switch and the
key fob button.
LIFTGATE RELEASE
WARNING
● Always be sure the liftgate has been
closed securely to prevent it from opening while driving.
● Do not drive with the liftgate open. This
could allow dangerous exhaust gases
to be drawn into the vehicle. For additional information, refer to “Exhaust
gas (carbon monoxide)” in the “Starting
and driving” section of this manual.
● To avoid personal injury, do not attempt
to activate the power liftgate if one or
both of the liftgate gas stays are
removed.
CAUTION
● If the power liftgate does not stay open
or if the liftgate unexpectedly closes at
any time while a continuous warning
chime sounds, do not operate the liftgate. There may be a pressure loss in
one or both of the liftgate gas stays.
Have the liftgate inspected by a NISSAN
dealer.
● Do not activate the power liftgate if one
or both of the liftgate gas stays are
removed. Damage to the liftgate or
power liftgate mechanisms may occur.
SPA2778
Manual liftgate release
Manual liftgate release (if so equipped)
If the liftgate cannot be locked or unlocked with
the door lock switch or the key fob due to a
discharged battery, follow these steps:
A on the inside of the
1. Remove the cover 䊊
liftgate.
B as illustrated to open the
2. Move the lever 䊊
liftgate.
Contact a NISSAN dealer as soon as possible for
repair.
Pre-driving checks and adjustments 3-27
FUEL-FILLER DOOR
LIFTGATE POSITION SETTING
The liftgate can be set to open to a specific height
by performing the following:
1. Open the liftgate using the request switch or
the Intelligent Key.
2. Pull the liftgate down to the desired position
and hold the liftgate (the liftgate will have
some resistance when being manually adjusted).
SPA2778
Power liftgate release (if so equipped)
If the liftgate cannot be opened with the instrument panel switch, liftgate opener switch or key
fob due to a discharged battery, follow these
steps:
A on the inside of the
1. Remove the cover 䊊
liftgate.
B as illustrated to open the
2. Move the lever 䊊
liftgate.
Contact a NISSAN dealer as soon as possible for
repair.
3-28 Pre-driving checks and adjustments
3. While holding the liftgate in position, press
located
and hold the liftgate switch
on the liftgate for approximately 5 seconds
or until three beeps are heard.
The liftgate will open to the selected position
setting. To change the position of the liftgate,
repeat Steps 1-3 for setting the position of the
liftgate.
LPD2110
OPENING THE FUEL-FILLER DOOR
The fuel-filler door automatically unlocks when
the driver’s door is unlocked.
1. Unlock the fuel-filler door using one of the
following operations:
● Unlock the driver’s door with the key fob.
● Unlock the driver’s door with the key.
● Push the power door lock switch to the
unlock position.
● Push the door handle request switch.
2. To open the fuel-filler door, push the right
side of the fuel-filler door to release.
To lock, close the fuel-filler door securely and
lock the doors.
FUEL-FILLER CAP
WARNING
● Gasoline is extremely flammable and
highly explosive under certain conditions. You could be burned or seriously
injured if it is misused or mishandled.
Always stop the engine and do not
smoke or allow open flames or sparks
near the vehicle when refueling.
● Do not attempt to top off the fuel tank
after the fuel pump nozzle shuts off
automatically. Continued refueling may
cause fuel overflow, resulting in fuel
spray and possibly a fire.
● Use only an original equipment type
fuel-filler cap as a replacement. It has a
built-in safety valve needed for proper
operation of the fuel system and emission control system. An incorrect cap
can result in a serious malfunction and
possible injury. It could also cause
Malfunction Indicator Light
the
(MIL) to come on.
● Never pour fuel into the throttle body to
attempt to start your vehicle.
● Do not fill a portable fuel container in
the vehicle or trailer. Static electricity
can cause an explosion of flammable
liquid, vapor or gas in any vehicle or
trailer. To reduce the risk of serious
injury or death when filling portable fuel
containers:
– Always place the container on the
ground when filling.
– Do not use electronic devices when
filling.
– Keep the pump nozzle in contact
with the container while you are filling it.
– Use only approved portable fuel containers for flammable liquid.
CAUTION
● Do not use E-15 or E-85 fuel in your
vehicle. For additional information, refer to the “Fuel Recommendation” in
the “Technical and consumer information” section of this manual.
● The LOOSE FUEL CAP warning will appear if the fuel-filler cap is not properly
tightened. It may take a few driving trips
for the message to be displayed. Failure
to tighten the fuel-filler cap properly
after the LOOSE FUEL CAP warning apMalfunction
pears may cause the
Indicator Light (MIL) to illuminate.
● Failure to tighten the fuel-filler cap
Malfuncproperly may cause the
tion Indicator Light (MIL) to illuminate.
light illuminates because
If the
the fuel-filler cap is loose or missing,
tighten or install the cap and continue
light
to drive the vehicle. The
should turn off after a few driving trips.
light does not turn off after a
If the
few driving trips, have the vehicle inspected by a NISSAN dealer.
● For additional information, refer to the
“Malfunction Indicator Light (MIL)” in
the “Instruments and Controls” section
in this manual.
● If fuel is spilled on the vehicle body,
flush it away with water to avoid paint
damage.
Pre-driving checks and adjustments 3-29
A on the steernext button 䊊
3. Press the
ing wheel for about 1 second to turn off the
B after tightLOOSE FUEL CAP warning 䊊
ening the fuel-filler cap.
LPD2082
To remove the fuel-filler cap:
1. Turn the fuel-filler cap counterclockwise to
remove.
1
2. Put the fuel-filler cap on the cap holder 䊊
while refueling.
To install the fuel-filler cap:
1. Insert the fuel-filler cap straight into the fuelfiller tube.
2. Turn the fuel-filler cap clockwise until a
single click is heard.
3-30 Pre-driving checks and adjustments
LPD2066
Loose Fuel Cap warning
The LOOSE FUEL CAP warning appears in the
vehicle information display when the fuel-filler
cap is not tightened correctly after the vehicle has
been refueled. It may take a few driving trips for
the message to be displayed. To turn off the
warning, perform the following:
1. Remove and install the fuel-filler cap as soon
as possible. For additional information, refer
to “Fuel-filler cap” in this section.
2. Tighten the fuel-filler cap until it clicks.
TILT/TELESCOPIC STEERING
WARNING
● Do not adjust the steering wheel while
driving. You could lose control of your
vehicle and cause an accident.
● Do not adjust the steering wheel any
closer to you than is necessary for
proper steering operation and comfort.
The driver’s air bag inflates with great
force. If you are unrestrained, leaning
forward, sitting sideways or out of position in any way, you are at greater risk of
injury or death in a crash. You may also
receive serious or fatal injuries from the
air bag if you are up against it when it
inflates. Always sit back against the
seatback and as far away as practical
from the steering wheel. Always use the
seat belts.
LPD2111
WPD0366
MANUAL OPERATION (if so
equipped)
AUTOMATIC OPERATION (if so
equipped)
Tilt and telescopic operation
Tilt and telescopic operation
1 down:
Pull the lock lever 䊊
● Adjust the steering wheel up or down in
2 to the desired position.
direction 䊊
● Adjust the steering wheel forward or back3 to the desired position.
ward in direction 䊊
1 up firmly to lock the
Push the lock lever 䊊
steering wheel in place.
1
To adjust the steering wheel move the switch 䊊
in the following directions:
● Adjust the steering wheel up or down in
2 to the desired tilt position.
direction 䊊
● Adjust the steering wheel forward or back3 to the desired teleward in direction 䊊
scopic position.
Pre-driving checks and adjustments 3-31
SUN VISORS
CAUTION
For vehicles with automatic drive positioner: Failure to reset the tilt and telescoping functions of the steering wheel,
after the vehicle’s battery has been discharged, may prevent the steering wheel
position from being adjusted.
For vehicles with automatic drive positioner: Both
the tilt and telescopic steering operation must be
reset after the vehicle’s battery has been discharged in order to prevent the tilt and telescopic
operation from locking in one position. When the
battery has been recharged or replaced, perform
the following:
Entry/Exit function
The automatic drive positioner system will make
the steering wheel move up automatically when
the driver’s door is opened and the ignition
switch is in the LOCK position. This lets the driver
get into and out of the seat more easily. The
steering wheel moves back into position when
the driver’s door is closed and the ignition switch
is pushed.
For additional information, refer to “Automatic
drive positioner” in this section.
1 so
● For tilt operation: Adjust the switch 䊊
the steering wheel moves to the highest
2 that can be reached.
position 䊊
● For telescopic operation: Adjust the switch
1 so the steering wheel moves to the most
䊊
3 that can
forward and backward position 䊊
be reached.
Performing these operations resets the range of
the steering wheel’s tilt and telescopic function.
WPD0297
3-32 Pre-driving checks and adjustments
MIRRORS
1
䊊
2
䊊
3
䊊
To block glare from the front, swing down the
sun visor.
To block glare from the side, remove the sun
visor from the center mount and swing the
visor to the side.
Slide the extension sun visor in or out as
needed.
CAUTION
● Do not store the sun visor before returning the extension to its original
position.
● Do not pull the extension sun visor forcibly downward.
LPD2067
VANITY MIRRORS
To access the vanity mirror, pull the sun visor
down and flip open the mirror cover. Some vanity
mirrors are illuminated and turn on when the
mirror cover is open.
WPD0126
REARVIEW MIRROR (if so equipped)
1 to reduce glare from
Use the night position 䊊
the headlights of vehicles behind you at night.
2 when driving in daylight
Use the day position 䊊
hours.
WARNING
Use the night position only when necessary, because it reduces rear view clarity.
Pre-driving checks and adjustments 3-33
AUTOMATIC ANTI-GLARE
REARVIEW MIRROR (if so equipped)
The inside mirror is designed so that it automatically dims during night time conditions and according to the intensity of the headlights of the
vehicle following you. The automatic anti-glare
feature is activated when the ignition switch is in
the ON position.
The indicator light will illuminate when the automatic anti-glare feature is operating.
NOTE:
Do not hang any objects over the sensors
1 or apply glass cleaner to the sensors.
䊊
Doing so will reduce the sensitivity of the
sensors, resulting in improper operation.
LPD0469
Type A - Without compass (if so equipped)
Type A and Type B (if so equipped)
2 will illuminate when the
The indicator light 䊊
automatic anti-glare feature is operating.
To turn off the automatic anti-glare feature, press:
● the O button for inside mirrors without
compass.
button for inside mirrors with
● the
compass.
The indicator light will turn off.
3-34 Pre-driving checks and adjustments
LPD0470
Type B - With compass (if so equipped)
To turn on the automatic anti-glare feature again,
press:
● the | button for inside mirrors without
compass.
button for inside mirrors with
● the
compass.
The indicator light will turn on.
For additional information on HomeLink® Universal Transceiver (if so equipped) operation, refer
to “HomeLink® Universal Transceiver” in the “Instruments and controls” section of this manual.
For additional information on the compass display
(if so equipped), refer to “Compass display” in the
“Instruments and controls” section of this manual.
WARNING
● Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.
● Do not adjust the mirrors while driving.
You could lose control of your vehicle
and cause an accident.
LPD2083
LPD2112
OUTSIDE MIRRORS
Manual folding outside mirrors
The outside mirror remote control will operate
only when the ignition switch is in the ACC or ON
position.
Pull the outside mirror toward the door to fold it.
1 to select the left or right
Move the small switch 䊊
mirror. Adjust each mirror to the desired position
2 .
using the large switch 䊊
Reverse tilt-down feature (if so
equipped)
The reverse tilt-down feature will turn both outside mirror surfaces downward to provide better
rear visibility close to the vehicle when the mirror
control switch is in either the L or R position.
The mirrors automatically return to their original
position when you shift out of R (Reverse).
Pre-driving checks and adjustments 3-35
AUTOMATIC DRIVE POSITIONER (if
so equipped)
The outside mirror surfaces will return to their
original position when one of the following conditions has occurred:
● The shift lever is moved to any position other
than R (Reverse).
The automatic drive positioner system has two
features:
● Memory storage function
● Entry/exit function
● The outside mirror control switch is set to the
neutral or center position.
● The ignition switch is placed in the OFF
position.
NOTE:
If the outside mirror control switch is in the
Center position, the mirror surface will NOT
turn downward when the shift lever is
moved to R (Reverse).
For additional information, refer to “Automatic
drive positioner” in this section.
Heated mirrors (if so equipped)
Some outside mirrors can be heated to defrost,
defog, or de-ice for improved visibility. For additional information, refer to “Rear window and
outside mirror (if so equipped) defroster switch”
in the “Instruments and controls” section of this
manual.
3-36 Pre-driving checks and adjustments
LPD2113
MEMORY STORAGE FUNCTION
Two positions for the driver’s seat, steering column
(if so equipped), and outside mirrors can be stored
in the automatic drive positioner memory. Follow
these procedures to use the memory system.
1. Place the ignition in the ON or ACC position
(the vehicle should be stopped while setting
the memory).
2. Adjust the driver’s seat, steering column (if
so equipped), and outside mirrors to the
desired positions by manually operating
each adjusting switch. For additional information, refer to “Seats” in the “Safety—
Seats, seat belts and supplemental restraint
system” section of this manual, and
“Tilt/Telescopic Steering” and “Outside mirrors” in this section.
Linking a key fob to a stored memory
position
3. Push the SET switch and, within 5 seconds,
push the memory switch (1 or 2).
Each key fob can be linked to a stored memory
position (memory switch 1 or 2) with the following procedure.
4. The indicator light for the pushed memory
switch will come ON and stay ON for approximately 5 seconds.
1. Follow steps 1-3 in the “Memory Storage
Function” section for storing the memory
position.
5. The chime will sound if the memory has been
stored.
2. The indicator light for the pushed memory
switch will come ON. While the indicator
light is ON for 5 seconds, press the
button on the key fob. The indicator light of
the linked memory switch will blink. After the
indicator light goes off, the key fob is linked
to that memory setting.
Once it is linked, when ignition switch is placed in
button on
the OFF position, pressing the
the key fob will move the driver’s seat, steering
wheel and outside mirrors to the linked memory
switch position.
NOTE:
If a NEW memory position is stored in the
same memory switch, the previous memory
position will be overwritten by the new
stored position.
Confirming memory storage
Push the SET switch.
● If a memory position has not been stored in
the switch (1 or 2) the indicator light for the
respective switch will come ON for approximately 0.5 seconds.
● If a memory position has been stored in the
switch (1 or 2) then the indicator light for the
respective switch will stay ON for approximately 5 seconds.
NOTE:
If a NEW memory position is stored in the
linked memory switch, then the key fob will
link the NEW position and overwrites the
previous position.
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s seat
and automatic operation steering column will automatically move when the shift lever is in the P
(Park) position. This allows the driver to get into
and out of the driver’s seat more easily.
The driver’s seat will slide backward and the
steering column will move up:
● When the driver’s door is opened with the
ignition switch placed in the OFF position.
● When the ignition switch is turned from
ACC to OFF with the driver’s door open.
The driver’s seat and steering wheel will return to
the previous position:
● When the ignition switch is turned into ACC
or ON while the shift lever is in the P (Park)
position.
The entry/exit function can be adjusted or canceled through the Vehicle Settings in the vehicle
information display by performing the following:
● Switch the Exit Seat Slide from ON to OFF.
● Switch the Exit Steering UP from ON to
OFF.
Pre-driving checks and adjustments 3-37
Restarting the entry/exit function
If the battery cable is disconnected, or if the fuse
opens, the stored memory positions will be lost
and some of the functions will be restricted:
1. Drive the vehicle over 25 MPH (40 km/h).
OR
2. Open and close the driver’s door more than
two times with the ignition switch in the OFF
position.
The entry/exit function should now work properly.
SETTING MEMORY FUNCTION
The position of the following settings can be
linked to the Intelligent Key and the memorized
settings can be available for each Intelligent Key.
● Climate control system
● Navigation system (if so equipped)
● Audio system
To use the memory function, set the climate,
navigation and audio systems to the driver’s preferred settings. Lock the doors with the Intelligent
Key. Each Intelligent Key may be set with the
driver’s individual preferences. When a new Intelligent Key is used, “Connection with the key
has been done” will be displayed on the screen
and the memorized settings are available.
3-38 Pre-driving checks and adjustments
To engage the memorized settings, perform the
following:
1. Carry the Intelligent Key that is linked to the
memorized settings.
2. Unlock the doors by pushing the driver’s
door handle request switch or the
button on the Intelligent
UNLOCK
Key.
3. Place the ignition switch in the “ON” position. The settings linked to the Intelligent Key
will start.
For additional information, refer to “Heater and air
conditioner (automatic)” in the “Monitor, climate,
audio, phone and voice recognition systems”
section of this manual.
For additional information on using the Navigation System, refer to the separate Navigation
System Owner’s Manual.
For additional information on using the Audio
system, refer to “Audio system” in the “Monitor,
climate, audio, phone and voice recognition systems” section of this manual.
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
● When the vehicle speed is above 4 MPH
(7 km/h).
● When any of the memory switches are
pushed while the automatic drive positioner
is operating.
● When the adjusting switch for the driver’s
seat is turned on while the automatic drive
positioner is operating.
● When the seat has already been moved to
the memorized position.
● When no seat position is stored in the
memory switch.
● When the shift lever is moved from P (Park)
to any other position.
4 Monitor, climate, audio, phone and voice
recognition systems
Control panel buttons — color screen without
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . 4-4
How to use the NISSAN controller . . . . . . . . . . . . . . . 4-5
How to select menus on the screen . . . . . . . . . . . . . . 4-6
How to use the STATUS button . . . . . . . . . . . . . . . . . . 4-6
How to use the INFO button . . . . . . . . . . . . . . . . . . . . . 4-6
How to use the SETTING button . . . . . . . . . . . . . . . . . 4-8
OFF button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Control panel buttons — color screen with
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . 4-10
How to use the NISSAN controller . . . . . . . . . . . . . . 4-11
How to use the touch-screen . . . . . . . . . . . . . . . . . . . 4-11
How to select menus on the screen . . . . . . . . . . . . . 4-13
How to use the STATUS button . . . . . . . . . . . . . . . . . 4-13
How to use the INFO button . . . . . . . . . . . . . . . . . . . . 4-14
How to use the SETTING button . . . . . . . . . . . . . . . . 4-16
OFF button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Image viewer (if so equipped) . . . . . . . . . . . . . . . . . . . . . . 4-19
Using the image viewer . . . . . . . . . . . . . . . . . . . . . . . . 4-19
RearView Monitor (if so equipped). . . . . . . . . . . . . . . . . . 4-21
How to read the displayed lines . . . . . . . . . . . . . . . . . 4-22
How to park with predicted course lines. . . . . . . . . . 4-22
Difference between predicted and actual
distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
How to adjust the screen . . . . . . . . . . . . . . . . . . . . . . . 4-26
Operating tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26
Around View® Monitor (if so equipped) . . . . . . . . . . . . . 4-27
Available views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28
Difference between predictive and actual
distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
How to switch the display . . . . . . . . . . . . . . . . . . . . . . 4-34
Parking Sensor (if so equipped) Rear Center
Sonar (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 4-34
How to adjust the screen view . . . . . . . . . . . . . . . . . . 4-35
View malfunction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
Operating tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37
Heater and air conditioner (automatic) (Type A)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38
Automatic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39
Manual operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40
Rear automatic air conditioning system. . . . . . . . . . . 4-41
Operating tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43
Heater and air conditioner (automatic) (Type B)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44
Automatic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45
Manual operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46
Operating tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-49
Servicing air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50
Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50
FM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51
AM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51
Satellite radio reception (if so equipped) . . . . . . . . . 4-51
Audio operation precautions . . . . . . . . . . . . . . . . . . . . 4-52
FM/AM radio with compact disc (CD)
changer (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . 4-66
FM/AM/SAT radio with compact disc (CD)
player (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 4-71
FM/AM/SAT radio with CD/DVD player
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-78
Digital Versatile Disc (DVD) Player
Operation (models with Navigation System) . . . . . . 4-84
USB (Universal Serial Bus) Connection Port
(models without Navigation System)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
USB (Universal Serial Bus) Connection Port
(models with Navigation System) . . . . . . . . . . . . . . . . 4-88
iPod®* player operation without Navigation
System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 4-92
iPod®* player operation with Navigation
System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 4-94
Bluetooth® streaming audio (if so equipped) . . . . . 4-98
CD care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . .4-101
Steering wheel switch for audio control . . . . . . . . .4-102
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-103
Dual head restraint/headrest DVD system
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-104
System components . . . . . . . . . . . . . . . . . . . . . . . . . .4-104
Before operating dual head restraint/
headrest DVD system . . . . . . . . . . . . . . . . . . . . . . . . .4-109
Playing a DVD (Digital Versatile Disc) . . . . . . . . . . .4-110
Operating tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-114
Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . .4-115
Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . .4-116
Bluetooth® Hands-Free Phone System without
Navigation System (if so equipped) . . . . . . . . . . . . . . . .4-116
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . .4-118
Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-118
Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-120
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-121
List of voice commands . . . . . . . . . . . . . . . . . . . . . . .4-122
Voice Adaptation (VA) mode . . . . . . . . . . . . . . . . . . .4-126
Manual control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-128
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . .4-129
Bluetooth® Hands-Free Phone System with
Navigation System (if so equipped) . . . . . . . . . . . . . . . .4-130
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . .4-132
Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-132
Connecting procedure . . . . . . . . . . . . . . . . . . . . . . . .4-133
Vehicle Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . .4-134
Handset phonebook . . . . . . . . . . . . . . . . . . . . . . . . . .4-136
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-137
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-138
During a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-139
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-139
Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-140
Bluetooth® settings . . . . . . . . . . . . . . . . . . . . . . . . . .4-141
Call volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-142
NISSAN Voice Recognition System
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-143
NISSAN Voice Recognition Standard Mode . . . . .4-143
Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-146
Before starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-146
Giving voice commands . . . . . . . . . . . . . . . . . . . . . . .4-146
NISSAN Voice Recognition Alternate
Command Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-151
Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-156
Speaker Adaptation function . . . . . . . . . . . . . . . . . . .4-158
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . .4-159
CONTROL PANEL BUTTONS — COLOR
SCREEN WITHOUT NAVIGATION
SYSTEM (if so equipped)
WARNING
● Positioning of the heating or air conditioning controls and display controls
should not be done while driving in order that full attention may be given to
the driving operation.
● Do not disassemble or modify this system. If you do, it may result in accidents,
fire, or electrical shock.
● Do not use this system if you notice any
abnormality, such as a frozen screen or
lack of sound. Continued use of the
system may result in accident, fire or
electric shock.
● In case you notice any foreign object in
the system hardware, spill liquid on it,
or notice smoke or smell coming from it,
stop using the system immediately and
contact your nearest NISSAN dealer. Ignoring such conditions may lead to accidents, fire or electrical shock.
LHA2469
1. STATUS button (P. 4-6)
2. INFO button (P. 4-6)
3. NISSAN controller (P. 4-5)
4.
OFF brightness control button
(P. 4-9)
4-4 Monitor, climate, audio, phone and voice recognition systems
5. BRIGHT + (brightness control) button
(P. 4-9)
6. BRIGHT – (brightness control) button
(P. 4-9)
BACK (previous) button (P. 4-5)
7.
8. SETTING button (P. 4-8)
BACK butIn some screens pressing the
3 accepts the changes made during setup.
ton 䊊
CAUTION
● The glass display screen may break if it
is hit with a hard or sharp object. If the
glass screen breaks, do not touch it.
Doing so could result in an injury.
● To clean the display, never use a rough
cloth, alcohol, benzine, thinner or any
kind of solvent or paper towel with a
chemical cleaning agent. They will
scratch or deteriorate the panel.
● Do not splash any liquid such as water
or car fragrance on the display. Contact
with liquid will cause the system to
malfunction.
When you use this system, make sure the engine
is running.
If you use the system with the engine not
running (ignition ON or ACC) for a long
time, it will discharge the battery, and the
engine will not start.
Reference symbols:
ENTER button — This is a button on the control
panel.
“Example” — Words marked in quotes refer to a
key shown on the display. These keys can only be
selected using the NISSAN controller.
LHA3179
HOW TO USE THE NISSAN
CONTROLLER
Use the NISSAN controller to choose an item on
the display screen. Highlight an item on the dis2 or the
play using the main directional buttons 䊊
4 . Then press the ENTER button 䊊
1
center dial 䊊
to select the item or perform the action.
The
3 has two functions:
BACK button 䊊
● Go back to the previous display (cancel).
3 during
BACK button 䊊
If you press the
setup, the setup will be canceled and/or the
display will return to the previous screen.
● Finish setup.
Monitor, climate, audio, phone and voice recognition systems 4-5
2. Menu Selections:
Shows the options to choose within that
menu screen (for example, Pacific time zone,
Mountain time zone, etc.).
3. UP/DOWN Movement Indicator:
Shows that the NISSAN controller may be
used to move UP/DOWN on the screen and
select more options.
4. Screen Count:
Shows the number of menu selections available for that screen (for example, 1/9).
LHA1300
HOW TO SELECT MENUS ON THE
SCREEN
Vehicle functions are viewed on the center display screen in menus. Whenever a menu selection is made or menu item is highlighted, different
areas on the screen provide you with important
information. See the following for details:
1. Header:
Shows the path used to get to the current
screen (for example, press the SETTING
button > then select the “Clock” key, then
select the “Time Zone” key).
5. Footer/Information Line:
Provides more information (if available)
about the menu selection currently highlighted (for example, manually set the time
zone).
HOW TO USE THE STATUS
BUTTON
To display the status of the audio, climate control
system and fuel consumption, press the STATUS
button.
The following information will appear when the
STATUS button is pressed multiple times:
Audio → Audio and climate control system →
Audio and fuel consumption → Audio
4-6 Monitor, climate, audio, phone and voice recognition systems
WHA1149
HOW TO USE THE INFO BUTTON
Press the INFO button. This screen sets or displays various information that is helpful for using
the vehicle. Available items include fuel economy
and maintenance information.
Menu Item
Fuel Economy
Distance to Empty (DTE)
Average Fuel Economy
Fuel Economy Record
Maintenance
Reminder keys (1–4)
Reset Distance
Interval
Interval Reminder
Result
Displays Fuel Economy menu.
Displays an estimation of the distance that the vehicle can be driven before refueling. The DTE is constantly calculated based on the
amount of fuel in the fuel tank and actual fuel consumption. The display is updated every 30 seconds. When the fuel level is low, the DTE
display will change to (*).
NOTE: If the amount of fuel added while the ignition switch is OFF is small, the display just before the ignition switch is turned off may
continue to be displayed.
NOTE: When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display.
Displays the average fuel economy since the last reset. The display is updated every 30 seconds and 1/3 mi (500 m). After a reset or
connecting the battery cables, the display might show (**.*).
Select the “View” key to display the average fuel consumption history in a graph form.
Displays maintenance reminders.
Select a key to display that maintenance interval.
Resets the distance for the selected reminder to 0 km (mi).
Displays the interval for the selected reminder. Select the “+” or “-” keys to adjust the distance up or down.
Displays status of the selected interval reminder. Select to toggle on or off. If set to “On”, the maintenance notice screen will be displayed
once the interval is met and the ignition switch is placed in the OFF and then ON position.
Monitor, climate, audio, phone and voice recognition systems 4-7
HOW TO USE THE SETTING
BUTTON
Press the SETTING button. This screen displays
and adjusts various settings and functions that
are available for your vehicle. Use the NISSAN
controller to select an item and then press the
ENTER button. When the amber indicator next to
an item is illuminated, the feature is enabled.
LHA1304
Menu Item
Audio
Display
Brightness/Contrast
Display off
Background Color
Switch Beeps
Camera
Clock
Result
For additional information, refer to “Audio system” in this section.
Adjusts the settings for the display screen.
Adjusts the brightness or contrast of the map background.
Toggles the display screen on and off. The amber indicator is illuminated when the display is set to “On”. When the display is set to “Off” and a
control panel, audio or heater and air conditioner button is pressed, the display will resume until that operation is finished. To turn the display
back on, press and hold the
OFF button for approximately 2 seconds or return to the display setting screen and adjust the setting.
Adjusts the display screen between day and night mode.
Toggles on and off the beep sound that is heard when a control panel button is pressed.
Toggles the predictive course lines on or off when the rear view camera is displayed on screen. For additional information, refer to “RearView
Monitor” in this section.
Adjusts the clock settings.
4-8 Monitor, climate, audio, phone and voice recognition systems
Menu Item
On-screen Clock
Clock Format
Daylight Savings Time
Time Zone
Adjust Clock
Language & Units
Result
Toggles on or off the clock in the upper right corner of the display.
Toggles between a 12-hour and 24-hour clock.
Toggles on or off the daylight savings time.
Adjusts the time zone. Choose a time zone from the available list.
Manually adjusts the hours and minutes of the clock.
Adjusts the language shown in the display. Available settings are “English”, “Français”, “or “Español”. Adjusts the unit settings shown on the
display. Available settings are “US” (mi,°F,MPG) and “Metric (km, °C, L/100 km))”.
OFF BUTTON
To change the display brightness, press
the
OFF button. Pressing the button again
will change the display to the day
or the
night
display. The brightness can then be
adjusted using the NISSAN controller.
The display brightness can also be adjusted using the + (brighter) button or the ⫺ (dimmer)
button.
If no operation is done within 10 seconds, the
display will return to the previous display.
OFF button for more
Press and hold the
than 2 seconds to turn the display off. Press the
button again to turn the display on.
Monitor, climate, audio, phone and voice recognition systems 4-9
CONTROL PANEL BUTTONS —
COLOR SCREEN WITH NAVIGATION
SYSTEM (if so equipped)
9.
OFF brightness control button
(P. 4-18)
10. - (brightness control) button (P. 4-18)
11. VOICE button (P. 4-143)
12. SETTING button (P. 4-16)
13. MAP button*
14.
BACK (previous) button (P. 4-11)
15. ZOOM IN button*
*For Navigation system control buttons, refer to
the separate Navigation System Owner’s
Manual.
When you use this system, make sure the engine
is running.
If you use the system with the engine not
running (ignition ON or ACC) for a long
time, it will discharge the battery, and the
engine will not start.
Reference symbols:
LHA2446
1. ZOOM OUT button*
5. NISSAN controller (P. 4-11)
2. CAMERA button (P. 4-27)
6. STATUS button (P. 4-13)
3. DEST (destination) button*
7. INFO button (P. 4-14)
4. ROUTE button*
8. + (brightness control) button (P. 4-18)
4-10 Monitor, climate, audio, phone and voice recognition systems
ENTER button — This is a button on the control
panel.
“Example” — Words marked in quotes refer to a
key shown only on the display. These keys can be
selected by touching the screen or using the
NISSAN controller.
BACK butIn some screens, pressing the
4 accepts the changes made during setup.
ton 䊊
3 functions, refer to the
For the VOICE button 䊊
separate Navigation System Owner’s Manual.
HOW TO USE THE TOUCHSCREEN
WARNING
● ALWAYS give your full attention to
driving.
● Avoid using vehicle features that could
distract you. If distracted, you could
lose control of your vehicle and cause
an accident.
CAUTION
● The glass display screen may break if it
is hit with a hard or sharp object. If the
glass screen breaks, do not touch it.
Doing so could result in an injury.
LHA3180
HOW TO USE THE NISSAN
CONTROLLER
Use the NISSAN controller to choose an item on
the display screen. Highlight an item on the dis2 or the
play using the main directional buttons 䊊
5 . Then press the ENTER button 䊊
1
center dial 䊊
to select the item or perform the action.
The
4 has two functions:
BACK button 䊊
● Go back to the previous display (cancel).
4 during
BACK button 䊊
If you press the
setup, the setup will be canceled and/or the
display will return to the previous screen.
● Finish setup.
● To clean the display, never use a rough
cloth, alcohol, benzine, thinner or any
kind of solvent or paper towel with a
chemical cleaning agent. They will
scratch or deteriorate the panel.
● Do not splash any liquid such as water
or car fragrance on the display. Contact
with liquid will cause the system to
malfunction.
To help ensure safe driving, some functions cannot be operated while driving.
The on-screen functions that are not available
while driving will be “grayed out” or muted.
Park the vehicle in a safe location and then operate the navigation system.
Monitor, climate, audio, phone and voice recognition systems 4-11
Touch-screen operation
With this system, the same operations as those
for the NISSAN controller are possible using the
touch-screen operation.
LHA1227
Menu Item
Selecting the item
Adjusting the item
Inputting characters
Uppercase
Lowercase
Space
Delete
OK
Result
1 on the screen. Touch the “BACK” key䊊
2
Touch an item to select . To select the “Navigation” key, touch the “Navigation” key䊊
to return to the previous screen.
Touch the “+” key or the “⫺” key to adjust the settings of an item. Touch the up arrow to scroll up the page one item at a time,
or touch the double up arrow to scroll up an entire page. Touch the down arrow to scroll down the page one item at a time, or
touch the double down arrow to scroll down an entire page.
Touch the letter or number key. There are some options available when inputting characters.
Shows uppercase characters.
Shows lowercase characters.
Inserts a space.
Deletes the last inputted character with one touch. Touch and hold the “Delete” key to delete all of the characters.
Completes the character input.
4-12 Monitor, climate, audio, phone and voice recognition systems
3. Up/Down Movement Indicator:
Shows that the NISSAN controller may be
used to move up or down on the screen to
select more options.
Touch-screen maintenance
If you clean the display screen, use a dry, soft
cloth. If additional cleaning is necessary, use a
small amount of neutral detergent with a soft
cloth. Never spray the screen with water or detergent. Dampen the cloth first, and then wipe the
screen.
4. Screen Count:
Shows the number of menu selections available for the current menu even if they are on
multiple pages (for example, 1/9).
5. Footer/Information Line:
Provides more information (if available)
about the menu selection currently highlighted (for example, Adjust bass).
LHA2178
HOW TO SELECT MENUS ON THE
SCREEN
Vehicle functions are viewed on the center display screen in menus. Whenever a menu selection is made or menu item is highlighted, different
areas on the screen provide you with important
information. See the following for details.
1. Header:
Shows the path used to get to the current
screen (for example, press the SETTING
button > then select the “Audio” key).
HOW TO USE THE STATUS
BUTTON
The STATUS button is used to display system
information. Three different split screens of information are available. Press the STATUS button
multiple times to cycle through these screens as
follows:
Audio with Turn Information for Navigation →
Audio with Fuel Economy Information → Audio
with Climate Control Information → Audio with
Turn Information for Navigation
2. Menu Selections:
Shows the options to choose within that
menu screen (for example, Bass, etc.).
Monitor, climate, audio, phone and voice recognition systems 4-13
HOW TO USE THE INFO BUTTON
Press the INFO button. This screen sets or displays various information that is helpful for using
the vehicle. Available items include fuel economy,
maintenance, navigation and voice recognition
information.
LHA1231
Menu Item
Fuel Economy
Distance to Empty (DTE)
Average Fuel Economy
Fuel Economy History
Maintenance
Reminder keys
Result
Displays Fuel Economy menu.
Displays an estimation of the distance that the vehicle can be driven before refueling. The DTE is constantly calculated based on the
amount of fuel in the fuel tank and actual fuel consumption. The display is updated every 30 seconds. When the fuel level is low, the DTE
display will change to (*).
NOTE: If the amount of fuel added while the ignition switch is OFF is small, the display just before the ignition switch is turned off may
continue to be displayed.
NOTE: When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display.
Displays the average fuel economy since the last reset. The display is updated every 30 seconds and 1/3 mi (500 m). After a reset or
connecting the battery cables, the display might show (**.*). Select “Reset Fuel Eco” to reset the fuel economy calculation to 0.
Touch the “View” key to display the average fuel consumption history in a graph form.
Displays maintenance reminders.
Touch a key to display the maintenance interval for engine oil, oil filter, tire or other reminder.
4-14 Monitor, climate, audio, phone and voice recognition systems
Menu Item
Reset Distance
Interval
Interval Reminder
Where am I?
Traffic Info
Weather Info
Map Update
Navigation Version
Others
Map Update
Navigation Version
GPS Position
Voice Recognition (if so
equipped)
Result
Resets the distance for the selected reminder to 0 mi (km).
Displays the interval for the selected reminder. Select the “+” or “-” keys to adjust the distance up or down.
Displays status of the selected interval reminder. Select to toggle on or off. If set to “On”, the maintenance notice screen will be displayed
once the interval is met and the ignition switch is placed in the OFF and then ON position.
For additional information, refer to the separate Navigation System Owner’s Manual.
For additional information, refer to the separate Navigation System Owner’s Manual.
For additional information, refer to the separate Navigation System Owner’s Manual.
For additional information, refer to the separate Navigation System Owner’s Manual.
For additional information, refer to the separate Navigation System Owner’s Manual.
Displays a list of further options.
For additional information regarding Map Updates, refer to the separate Navigation System Owner’s Manual.
For additional information regarding Navigation Version, refer to the separate Navigation System Owner’s Manual.
For additional information regarding GPS Position, refer to the separate Navigation System Owner’s Manual.
For additional information regarding Voice Recognition, refer to “NISSAN Voice Recognition System” in this section.
Monitor, climate, audio, phone and voice recognition systems 4-15
HOW TO USE THE SETTING
BUTTON
Press the SETTING button. This screen displays
and adjusts various settings and functions that
are available for your vehicle. When the amber
indicator next to an item is illuminated, the feature
is enabled.
LHA1236
Menu Item
Navigation
Audio
Phone
Bluetooth
Volume & Beeps
Navigation volume
Phone Volume
Switch Beeps
Rear Display (if so equipped)
Result
For additional information, refer to the separate Navigation System Owner’s Manual.
For additional information, refer to “Audio system” in this section.
For additional information, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section.
For additional information, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section.
Adjusts the volume and beep settings.
For additional information, refer to the separate Navigation System Owner’s Manual.
For additional information, refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section.
Toggles on or off the beep sound that is heard when a control panel button is pressed.
Adjusts the settings for the rear displays.
4-16 Monitor, climate, audio, phone and voice recognition systems
Menu Item
Display Control
Auto Display
Rear Speaker
Display
Brightness/Contrast
Display off
Background Color
Color Theme
Clock
On-screen Clock
Clock Format
Offset (hour), Offset (min)
Daylight Savings Time
Time Zone
Others
Language & Units
Select Language
Select Units
Result
Select the “ON” key for either the left of right display to alternately enable or disable the display to the left or right rear passengers. If the display
is enabled, select the key (DVD, USB, front AUX or rear AUX) that you wish to have displayed on the corresponding screen. The front AUX setting is for devices plugged into the AUX jacks in the center console. The rear AUX setting is for the devices plugged into the AUX jacks on the
back of the center console.
Toggles ON or OFF the Auto Display option. When the Auto Display is ON, the rear displays will automatically turn on when a movie is played
from a DVD or USB device.
Toggles ON or OFF the rear speaker volume.
Adjusts the settings for the display screen
Adjusts the brightness or contrast of the map background.
Toggles the display screen on and off. The amber indicator is illuminated when the display is set to “On”. When the display is set to “Off” and a
control panel, audio or heater and air conditioner button is pressed, the display will resume until that operation is finished. To turn the display back
OFF button for approximately 2 seconds or return to the display setting screen and adjust the setting.
on, press and hold the
Adjusts the display screen between day and night mode.
Changes the color of the background, arrows and bars on the screen.
Adjusts the clock settings.
Toggles on or off the clock in the upper right corner of the display.
Toggles between a 12-hour and 24-hour clock.
Manually adjusts the hours and minutes of the clock.
Toggles on or off the daylight savings time.
Adjusts the time zone. Choose a time zone from the available list.
Select the “Others” key using the NISSAN controller. Language and units, Voice Recognition, Camera Settings, and Image Viewer setting screen
will be displayed.
Adjusts the language and unit settings shown on the display.
Changes the language of the menus on the display screen. If you touch the “Francais” key, French language screens will be displayed, so please
use the French Owner’s Manual. To obtain a French Owner’s Manual, refer to “Owner’s Manual/Service Manual Order Information” in the “Technical and consumer information” section.
Changes the units used to “US” (mi, °F, MPG) or “Metric” (km, °C, L/100km).
Monitor, climate, audio, phone and voice recognition systems 4-17
Menu Item
Voice Recognition
Camera Settings
Image Viewer
Result
For additional information, refer to “NISSAN Voice Recognition system” in this section.
Touching the Camera key will bring up the Camera settings screen.
For additional information, refer to “Image viewer” in this section.
OFF BUTTON
To change the display brightness, press
the
OFF button. Pressing the button again
will change the display to the day
or the
night
display. The brightness can then be
adjusted using the NISSAN controller.
If no operation is performed within 5 seconds, the
display will return to the previous display.
OFF button for more
Press and hold the
than 2 seconds to turn the display off. Press the
button again to turn the display on.
4-18 Monitor, climate, audio, phone and voice recognition systems
IMAGE VIEWER (if so equipped)
Select the “Full Screen Display” key and press
the ENTER button to view a full screen version of
the image.
USING THE IMAGE VIEWER
When a compatible portable storage device is
plugged into the USB connection port located in
the center console, compatible image files stored
on the device can be viewed on the control panel
display.
Image requirements:
● Image type: JPEG
● File extensions: *.jpg, *.jpeg
Connecting the portable storage
device
● Maximum resolution: 2048 x 1536
● Maximum size: 2 MB
To connect a portable storage device to the system so that images stored on it can be viewed,
insert the device into the USB connection port
located in the center console.
● Colors: 32,768 (15-bit)
LHA1309
Viewing images
To view an image, press the SETTING button and
then select the “Image Viewer” key with the
NISSAN controller. The Image Viewer screen will
be displayed.
● Maximum file name length: 253 bytes (display only shows first 8 characters)
● Maximum folders: 500
● Maximum images per folder: 1,024
A list of compatible images on the storage device
is displayed on the left side of the screen, while
the selected image is displayed on the right side
of the screen. To choose a different picture from
the list, use the NISSAN controller to scroll
through the list once the desired image is highlighted.
Monitor, climate, audio, phone and voice recognition systems 4-19
Viewing images in a slideshow
To view all of the images on the device in a
slideshow, first enter the full screen mode while
viewing one of the images. The slideshow control
buttons are located on the right side of the
screen.
LHA1310
to the full screen display of the image currently on
the screen.
Slideshow settings
While in slideshow mode, the following settings
can be accessed:
to begin the slideshow.
Select the play key
The images shown on the screen will periodically
change at a given interval of time. To skip through
the images without waiting for them to change
key to skip backautomatically, select the
ward or the
key to skip forward. Select the
stop key
to end the slideshow and return
Settings
Slideshow Speed
Slideshow Order
Random
Order List
Changes the frequency at which images are changed during a slideshow. Choose one of the options on the screen or “No Auto Change” to
have the images not change automatically.
Changes images in a random order when selected.
Changes images in the order in which they are saved on the USB device.
4-20 Monitor, climate, audio, phone and voice recognition systems
REARVIEW MONITOR (if so
equipped)
When the shift lever is shifted into the R (Reverse) position, the monitor display shows the
view to the rear of the vehicle.
WARNING
Failure to follow the warnings and instructions for proper use of the RearView
Monitor could result in serious injury or
death.
● The RearView Monitor is a convenience
but it is not a substitute for proper backing. Always turn and look out the windows, and check mirrors to be sure that
it is safe to move before operating the
vehicle. Always back up slowly.
● The system is designed as an aid to the
driver in showing large stationary objects directly behind the vehicle, to help
avoid damaging the vehicle.
● The system cannot completely eliminate blind spots and may not show every object.
● Underneath the bumper and the corner
areas of the bumper cannot be viewed
on the RearView Monitor because of its
monitoring range limitation. The system
will not show small objects below the
bumper, and may not show objects
close to the bumper or on the ground.
● Objects viewed in the RearView Monitor differ from actual distance because
a wide-angle lens is used.
● Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a
fire or an electric shock.
CAUTION
There is a plastic cover over the camera.
Do not scratch the cover when cleaning
dirt or snow from the cover.
● Objects in a RearView Monitor will appear visually opposite than when
viewed in the rear view and outside
mirrors.
● Make sure that the liftgate is securely
closed when backing up.
● Do not put anything on the rearview
camera. The rearview camera is installed above the license plate.
● When washing the vehicle with high
pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock.
Monitor, climate, audio, phone and voice recognition systems 4-21
5 :
Vehicle width guide lines 䊊
6 :
Predictive course lines 䊊
● On a snow-covered or slippery road,
there may be a difference between the
predictive course line and the actual
course line.
Indicate the predictive course when backing up.
The predictive course lines will be displayed on
the monitor when the shift lever is in the R (Reverse) position and the steering wheel is turned.
The predictive course lines will move depending
on how much the steering wheel is turned and
will not be displayed while the steering wheel is in
the neutral position.
● The distance guide line and the vehicle
width line should be used as a reference
only when the vehicle is on a level
paved surface. The distance viewed on
the monitor is for reference only and
may be different than the actual distance between the vehicle and displayed objects.
Indicate the vehicle width when backing up.
LHA1196
HOW TO READ THE DISPLAYED
LINES
Guiding lines which indicate the vehicle width
and distances to objects with reference to the
A are displayed on the monitor.
vehicle body line 䊊
Distance guide lines:
Indicate distances from the vehicle body.
1 : approx. 1.5 ft (0.5 m)
● Red line 䊊
2 : approx. 3 ft (1 m)
● Yellow line 䊊
3 : approx. 7 ft (2 m)
● Green line 䊊
The vehicle width guide lines and the width of the
predictive course lines are wider than the actual
width and course.
HOW TO PARK WITH PREDICTED
COURSE LINES
WARNING
● Always turn and check that it is safe to
do so before backing up. Always back
up slowly.
● If the tires are replaced with different
sized tires, the predictive course lines
may be displayed incorrectly.
4 : approx. 10 ft (3 m)
● Green line 䊊
4-22 Monitor, climate, audio, phone and voice recognition systems
● When backing up the vehicle up a hill,
objects viewed in the monitor are further than they appear. When backing up
the vehicle down a hill, objects viewed
in the monitor are closer than they appear. Use the inside mirror or glance
over your shoulder to properly judge
distances to other objects.
C , maneuvehicle enters the parking space 䊊
ver the steering wheel to make the vehicle
D parallel to the parking
width guide lines 䊊
C.
space 䊊
5. When the vehicle is parked in the space
completely, move the shift lever to the P
(Park) position and apply the parking brake.
DIFFERENCE BETWEEN
PREDICTED AND ACTUAL
DISTANCES
The distance guide line and the vehicle width
guide line should be used as a reference only
when the vehicle is on a level, paved surface. The
distance viewed on the monitor is for reference
only and may be different than the actual distance
between the vehicle and displayed objects.
LHA1197
LHA1198
1. Visually check that the parking space is safe
before parking your vehicle.
3. Slowly back up the vehicle adjusting the
steering wheel so that the predicted course
B enter the parking space 䊊
C.
lines 䊊
2. The rear view of the vehicle is displayed on
A when the shift lever is moved
the screen 䊊
to the R (Reverse) position.
4. Maneuver the steering wheel to make the
D parallel to the
vehicle width guide lines 䊊
C . When the back of the
parking space 䊊
Monitor, climate, audio, phone and voice recognition systems 4-23
B . Note that any object on
the hill is the place 䊊
the hill is further than it appears on the monitor.
LHA3145
LHA3146
Backing up on a steep uphill
Backing up on a steep downhill
When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide
lines are shown closer than the actual distance.
For example, the display shows 3 ft (1.0 m) to the
A , but the actual 3 ft (1.0 m) distance on
place 䊊
When backing up the vehicle down a hill, the
distance guide lines and the vehicle width guide
lines are shown farther than the actual distance.
For example, the display shows 3 ft (1.0 m) to the
A , but the actual 3 ft (1.0 m) distance on
place 䊊
4-24 Monitor, climate, audio, phone and voice recognition systems
B . Note that any object on
the hill is the place 䊊
the hill is closer than it appears on the monitor.
LHA1201
LHA3147
Backing up near a projecting object
Backing up behind a projecting object
A do not touch the
The predicted course lines 䊊
object in the display. However, the vehicle may hit
the object if it projects over the actual backing up
course.
C is shown farther than the position
The position 䊊
B in the display. However, the position 䊊
C is
䊊
A.
actually at the same distance as the position 䊊
The vehicle may hit the object when backing up to
Monitor, climate, audio, phone and voice recognition systems 4-25
A if the object projects over the
the position 䊊
actual backing up course.
HOW TO ADJUST THE SCREEN
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the RearView
Monitor, press the SETTING button with the
RearView Monitor on and touch the “Display” key.
Select one of the items and change the value by
touching the “+” or “-” key or by turning the
NISSAN controller.
Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the RearView Monitor
while the vehicle is moving. Make sure the parking brake is firmly applied.
OPERATING TIPS
● When the shift lever is shifted to the R (Reverse) position, the display screen automatically changes to the RearView Monitor
mode. However, the radio can be heard.
● When strong light is directly coming on the
camera, objects may not be displayed
clearly. This is not a malfunction.
● Vertical lines may be seen in objects on the
screen. This is due to strong reflected light
from the bumper. This is not a malfunction.
● The screen may flicker under fluorescent
light. This is not a malfunction.
● The colors of objects on the RearView Monitor may differ somewhat from those of the
actual color of the objects. This is not a
malfunction.
● Objects on the monitor may not be clear in a
dark environment. This is not a malfunction.
● If dirt, rain or snow accumulates on the camera, the RearView Monitor may not display
objects clearly. Clean the camera.
● Do not use wax on the camera window.
Wipe off any wax with a clean cloth dampened with mild detergent diluted with water.
● When the view is switched, the display images on the screen may be displayed with
some delay.
● When the temperature is extremely high or
low, the screen may not clearly display objects. This is not a malfunction.
4-26 Monitor, climate, audio, phone and voice recognition systems
CAUTION
● Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth dampened with diluted mild cleaning agent and then wipe
with a dry cloth.
● Do not damage the camera as the monitor screen may be adversely affected.
AROUND VIEW® MONITOR (if so
equipped)
3 of
bird’s-eye view, a tall object near the seam 䊊
the camera viewing areas will not appear in the
2 .
monitor 䊊
With the ignition switch in the ON position, press
the CAMERA button or move the shift lever to the
R (Reverse) position to operate the Around
View® Monitor. The monitor displays various
views of the position of the vehicle in a split
screen format.
WARNING
● The Around View® Monitor is a convenience features. It is not a substitute for
proper vehicle operation because it has
areas where objects cannot be viewed.
Always look out the windows and check
to be sure that it is safe to move.
Available views
● Bird’s-Eye View
The surrounding view of the vehicle from
above.
● Front-Side View
The view around and ahead of the front
passenger’s side wheel.
● The driver is always responsible for
safety during parking and other
maneuvers.
● Front View
An approximately 150–degree view of the
front of the vehicle.
● Do not use the Around View® Monitor
with the outside mirror in the stored
position, and make sure that the liftgate
is securely closed when operating the
vehicle using the Around View®
Monitor.
● Rearview
An approximately 130.5-degree view of the
rear of the vehicle.
The system is designed as an aid to the driver in
situations such as slot parking or parallel parking.
LHA3148
There are some areas where the system will not
show objects and the system does not warn of
moving objects. When in the front or rear view
display, an object below the bumper or on the
1 . When in the
ground may not be viewed 䊊
● The distance between objects viewed
on the Around View® Monitor differs
from the actual distance.
● The cameras are installed on the front
grille, the outside mirrors and above the
rear license plate. Do not put anything
on the cameras.
Monitor, climate, audio, phone and voice recognition systems 4-27
● When washing the vehicle with highpressure water, be sure not to spray it
around the cameras. Otherwise, water
may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock.
● Do not strike the cameras. They are
precision instruments. Doing so could
cause a malfunction or cause damage
resulting in a fire or an electric shock.
CAUTION
Do not scratch the camera lens when
cleaning dirt or snow from the front of the
camera.
AVAILABLE VIEWS
WARNING
● The distance guide line and the vehicle
width line should be used as a reference
only when the vehicle is on a paved,
level surface. The distance viewed on
the monitor may be different than the
actual distance between the vehicle and
displayed objects.
● The distance between objects viewed in
the rearview differs from the actual distance because a wide-angle lens is
used.
● On a snow-covered or slippery road,
there may be a difference between the
predictive course lines and the actual
course line.
● Use the displayed lines and the bird’seye view as a reference. The lines and
the bird’s-eye view are greatly affected
by the number of occupants, fuel level,
vehicle position, road condition and
road grade.
● The displayed lines on the rearview will
appear slightly off to the right, because
the rearview camera is not installed in
the rear center of the vehicle.
● If the tires are replaced with different
sized tires, the predictive course lines
and the bird’s-eye view may be displayed incorrectly.
● When driving the vehicle up a hill, objects viewed in the monitor are further
than they appear. When driving the vehicle down a hill, objects viewed in the
monitor are closer than they appear.
Use the mirrors or actually look to properly judge distances to other objects.
● Use the mirrors or actually look to properly judge distances to other objects.
● Objects in the monitor will appear visually opposite than when viewed in the
rearview and outside mirrors.
4-28 Monitor, climate, audio, phone and voice recognition systems
● The vehicle width and predictive course
lines are wider than the actual width
and course.
The front view will not be displayed when the
vehicle speed is above 6 mph (10 km/h).
NOTE:
When the monitor displays the front view
and the steering wheel turns about 90 degrees or less from the neutral position,
both the right and left predictive course
6 are displayed. When the steering
lines 䊊
wheel turns about 90 degrees or more, a
line is displayed only on the opposite side
of the turn.
SAA1840
Front view
Front and rear view
Guiding lines, which indicate the vehicle width
and distance to objects with reference to the
A , are displayed on the monivehicle body line 䊊
tor.
Distance guide lines
Indicate distances from the vehicle body:
1 : approximately 1.5 ft (0.5 m)
● Red line 䊊
2 : approximately 3 ft (1 m)
● Yellow line 䊊
3 : approximately 7 ft (2 m)
● Green line 䊊
SAA1896
Rear view
5
Vehicle width guide lines 䊊
Indicate the vehicle width when backing up.
6
Predictive course lines 䊊
Indicate the predictive course when operating
the vehicle. The predictive course lines will be
displayed on the monitor when the steering
wheel is turned. The predictive course lines will
move depending on how much the steering
wheel is turned and will not be displayed while
the steering wheel is in the straight ahead position.
4 : approximately 10 ft (3 m)
● Green line 䊊
Monitor, climate, audio, phone and voice recognition systems 4-29
displayed. It will be shown only the first time after
the ignition switch is placed in the ON position.
When the corner of the vehicle moves closer to
3 appear.
an object, the corner sonar indicators 䊊
When the center of the vehicle moves close to an
4 appears (if
object, the center sonar indicator 䊊
so equipped).
The driver can check the direction and angle of
5 when driving
the tire on the display by tire icon 䊊
the vehicle forward or backward.
LHA2213
Bird’s-eye view
The bird’s-eye view shows the overhead view of
the vehicle, which helps confirm the vehicle position and the predicted course to a parking
space.
1 shows the position of the
The vehicle icon 䊊
vehicle. Note that the size of the vehicle icon on
the bird’s-eye view may differ somewhat from the
actual vehicle.
2 are
The areas that the cameras cannot cover 䊊
indicated in black.
The non-viewable area 䊊 is highlighted in yellow
for several seconds after the bird’s-eye view is
2
6 and 䊊
7 ) indicate the
Predictive course lines (䊊
predictive course when operating the vehicle.
The predictive course lines will be displayed on
the monitor when the steering wheel is turned.
The predictive course lines will move depending
on how much the steering wheel is turned and
will not be displayed while the steering wheel is in
the neutral position.
When the monitor displays the front view and the
steering wheel turns about 90 degrees or less
from the neutral position, the two green predic6 are shown in front of the
tive course lines 䊊
vehicle.
When the steering wheel turns about 90 degrees
or more, one green predictive course lines is
shown in front of the vehicle and other green
7 is shown at side of the
predictive course lines 䊊
vehicle.
4-30 Monitor, climate, audio, phone and voice recognition systems
When the monitor displays the rear view, the
predictive course lines are shown at back of the
vehicle.
WARNING
● Objects in the bird’s-eye view will appear further than the actual distance
because the bird’s-eye view is a pseudo
view that is processed by combining the
views from the cameras on the outside
mirrors, the front and the rear of the
vehicle.
● Tall objects, such as a curb or vehicle,
may be misaligned or not displayed at
the seam of the views.
● Objects that are above the camera cannot be displayed.
● The view of the bird’s-eye view may be
misaligned when the camera position
alters.
● A line on the ground may be misaligned
and is not seen as being straight at the
seam of the views. The misalignment
will increase as the line proceeds away
from the vehicle.
● Tire angle display does not indicate the
actual tire angle.
CAUTION
● The turn signal light may look like the
side-of-vehicle line. This is not a
malfunction.
DIFFERENCE BETWEEN
PREDICTIVE AND ACTUAL
DISTANCES
SAA1842
Front-side view
The distance guide line and the vehicle width
guide line should be used as a reference only
when the vehicle is on a level, paved surface. The
distance viewed on the monitor is for reference
only and may be different than the actual distance
between the vehicle and displayed objects.
Guiding lines
Guiding lines that indicate the width and the front
end of the vehicle are displayed on the monitor.
1 shows the front part
The front-of-vehicle line 䊊
of the vehicle.
2 shows the vehicle
The side-of-vehicle line 䊊
width including the outside mirror.
3 of both the front 䊊
1 and side
The extensions 䊊
2 lines are shown with a green dotted line.
䊊
The rear sonar indicator will appear when the rear
4 .
of the vehicle moves closer to an object 䊊
LHA3145
Backing up on a steep uphill
When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide
lines are shown closer than the actual distance.
For example, the display shows 3 ft (1.0 m) to the
A , but the actual 3 ft (1.0 m) distance on
place 䊊
Monitor, climate, audio, phone and voice recognition systems 4-31
B . Note that any object on
the hill is the place 䊊
the hill is further than it appears on the monitor.
B . Note that any object on
the hill is the place 䊊
the hill is closer than it appears on the monitor.
LHA3146
Backing up on a steep downhill
When backing up the vehicle down a hill, the
distance guide lines and the vehicle width guide
lines are shown farther than the actual distance.
For example, the display shows 3 ft (1.0 m) to the
A , but the actual 3 ft (1.0 m) distance on
place 䊊
4-32 Monitor, climate, audio, phone and voice recognition systems
LHA1201
Backing up near a projecting object
A do not touch the
The predicted course lines 䊊
object in the display. However, the vehicle may hit
the object if it projects over the actual backing up
course.
LHA2548
LHA3147
There may be a small distance visible between
the vehicle and the object in the bird-eye view on
B.
the display 䊊
Backing up behind a projecting object
C is shown farther than the position
The position 䊊
B in the display. However, the position 䊊
C is
䊊
A.
actually at the same distance as the position 䊊
The vehicle may hit the object when backing up to
Monitor, climate, audio, phone and voice recognition systems 4-33
A if the object projects over the
the position 䊊
actual backing up course.
● The system is deactivated at speeds
above 6 mph (10 km/h). It is reactivated
at lower speeds.
HOW TO SWITCH THE DISPLAY
● The driver is always responsible for
safety during parking and other
maneuvers.
With the ignition switch in the ON position, press
the CAMERA button or move the shift lever to the
R (Reverse) position to operate the Around
View® Monitor.
● Always look around and check that it is
safe to move before parking.
The Around View® Monitor can display two split
view. Select the “Change View” key to switch
between the available views.
● Read and understand the limitations of
the sonar (parking sensor) as contained
in this section.
If the shift lever is not in the R (Reverse) position,
the available views are:
● Front-view/bird’s-eye view split screen
● Front-view/front-side view split screen
If the shift lever is in the R (Reverse) position, the
available views are:
● Rearview/bird’s-eye view split screen
● Rearview/front-side view split screen
The display will switch from the Around View®
Monitor screen when:
● When the shift lever is in the D (Drive) position and the vehicle speed increases above
approximately 6 mph (10 km/h).
● When a different screen is selected.
LHA2549
PARKING SENSOR (if so equipped)
REAR CENTER SONAR (if so
equipped)
The sonar (parking sensor) sounds a tone to
inform the driver of obstacles near the bumper.
The colors of the sonar indicators and the distance guide lines in the rear view indicate different distances to the object.
WARNING
● The sonar (parking sensor) is a convenience feature. It is not a substitute for
proper parking.
4-34 Monitor, climate, audio, phone and voice recognition systems
● Inclement weather or ultrasonic
sources such as an automatic car wash,
a truck’s compressed-air brakes or a
pneumatic drill may affect the function
of the system; this may include reduced
performance or a false activation.
● This function is designed as an aid to
the driver in detecting large stationary
objects to help avoid damaging the
vehicle.
● The system is not designed to prevent
contact with small or moving objects.
● The system will not detect small objects
below the bumper, and may not detect
objects close to the bumper or on the
ground.
● The system may not detect the following objects:
The system gives the tone for rear objects when
the shift lever is in the R (Reverse) position.
– Fluffy objects such as snow, cloth,
cotton, glass or wool.
The system is deactivated at speeds above
6 mph (10 km/h). It is reactivated at lower
speeds.
– Thin objects such as rope, wire or
chain.
– Wedge-shaped objects.
● If your vehicle sustains damage to the
bumper fascia, leaving it misaligned or
bent, the sensing zone may be altered
causing inaccurate measurement of objects or false alarms.
CAUTION
● Excessive noise (such as audio system
volume or an open vehicle window) will
interfere with the tone and it may not be
heard.
● Keep the surface of the sonar sensors
(located on the rear bumper fascia) free
from accumulations of snow, ice and
dirt. Do not scratch the surface of the
sonar sensors when cleaning. If the
sensors are covered, the accuracy of the
sonar function will be diminished.
● When the ignition switch is placed in the
OFF position and turned back to the ON
position again.
● The sonar system can be permanently
turned off using the meter settings.
When the objects are detected, the indicator
(green) appears and blinks and the tone sounds
intermittently. When the vehicle moves closer to
the object, the color of the indicator turns yellow
and the rate of the blinking and the rate of the
tone increase. When the vehicle is very close to
the object, the indicator stops blinking and turns
red, and the tone sounds continuously.
HOW TO ADJUST THE SCREEN
VIEW
The intermittent tone will stop after 3 seconds
when an object is detected by only the corner
sonar and the distance does not change.
Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the Around View® Monitor while the vehicle is moving. Make sure the
parking brake is firmly applied.
The tone will stop when the object is no longer
near the vehicle.
To adjust the Display ON/OFF, Brightness, Tint,
Color, Contrast and Black Level of the Around
View® Monitor, press the SETTING button with
the Around View® Monitor on, select the item key
and adjust the level using the NISSAN controller.
In the below cases, the sonar will be turned back
on automatically:
● When the shift lever is in the R (Reverse)
position.
● When vehicle speed decreases below approximately 6 mph (10 km/h).
Monitor, climate, audio, phone and voice recognition systems 4-35
OPERATING TIPS
CAUTION
● Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration. To clean the camera,
wipe with a cloth dampened with a diluted mild cleaning agent and then wipe
with a dry cloth.
● Do not damage the camera as the monitor screen may be adversely affected.
LHA2550
VIEW MALFUNCTION
When the “!” icon is displayed on the screen, the
Around View® Monitor may not be calibrated
correctly. This will not hinder normal driving function but the system should be inspected by a
NISSAN dealer.
● The screen displayed on the Around View®
Monitor will automatically return to the previous screen 3 minutes after the CAMERA
button has been pressed with the shift lever
in a position other than the R (Reverse)
position.
● When the view is switched, the display images on the screen may be displayed in
some delay.
● When the temperature is extremely high or
low, the screen may not display objects
clearly. This is not a malfunction.
● When strong light directly shines on the
camera, objects may not be displayed
clearly. This is not a malfunction.
4-36 Monitor, climate, audio, phone and voice recognition systems
● The screen may flicker under fluorescent
light. This is not a malfunction.
● The colors of objects on the Around View®
Monitor may differ somewhat from the actual
color of objects. This is not a malfunction.
● Objects on the Around View® Monitor may
not be clear and the color of the object may
differ in a dark environment. This is not a
malfunction.
● There may be differences in sharpness between each camera view of the bird’s-eye
view.
● If dirt, rain or snow accumulates on the camera, the Around View® Monitor may not
display objects clearly. Clean the camera.
● Do not use wax on the camera lens. Wipe off
any wax with a clean cloth that has been
dampened with a mild detergent diluted with
water.
VENTS
LHA2480
1 ,
Adjust air flow direction for the center vents 䊊
2 , and rear
driver’s and passenger’s side vents 䊊
3 by moving the vent slide and/or vent
vents 䊊
assemblies.
Open or close the vents using the dial. Move the
to open the vents or toward
dial toward the
to close them.
the
Monitor, climate, audio, phone and voice recognition systems 4-37
HEATER AND AIR CONDITIONER
(automatic) (Type A) (if so equipped)
WARNING
● The air conditioner cooling function operates only when the engine is running.
LHA2472
1.
2.
3.
4.
5.
6.
7.
8.
9.
Temperature control buttons
(driver’s side)
AUTO climate control ON button
(front defroster) button
Air recirculation button
MODE (manual air flow control) button
Temperature control buttons (passenger’s side)
DUAL (passenger side temperature
control) ON/OFF button
REAR button
(fan speed control) knob/ON/
OFF button
10.
(rear window and outside mirror
(if so equipped) defroster) button
11. A/C (air conditioner) ON/OFF button
4-38 Monitor, climate, audio, phone and voice recognition systems
● Do not leave children or adults who
would normally require the assistance
of others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
others through inadvertent operation of
the vehicle. Also, on hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause
severe or possibly fatal injuries to
people or animals.
● Do not use the recirculation mode for
long periods as it may cause the interior
air to become stale and the windows to
fog up.
Start the engine and operate the controls to
activate the air conditioner.
NOTE:
● Odors from inside and outside the vehicle
can build up in the air conditioner unit. Odor
can enter the passenger compartment
through the vents.
● When parking, set the heater and air conditioner controls to turn off air recirculation to
allow fresh air into the passenger compartment. This should help reduce odors inside
the vehicle.
AUTOMATIC OPERATION
Cooling and/or dehumidified heating
(AUTO)
This mode may be used all year round as the
system automatically works to keep a constant
temperature. Air flow distribution and fan speed
are also controlled automatically.
1. Press the AUTO button on. (The indicator on
the button will illuminate and AUTO will be
displayed.)
2. Operate the driver’s side temperature control buttons.
● Adjust the temperature display to about
75°F (24°C) for normal operation.
● The temperature of the passenger compartment will be maintained automatically. Air
flow distribution and fan speed are also controlled automatically.
● A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air
is cooled rapidly. This does not indicate a
malfunction.
3. You can individually set driver’s and front
passenger’s side temperature using each
temperature control button. When the DUAL
button or passenger’s side temperature button is pressed, the DUAL indicator will come
on. To turn off the passenger’s side temperature control, press the DUAL button.
Heating (A/C OFF)
The air conditioner does not activate. When you
need to heat only, use this mode.
1. Press the A/C button. (A/C OFF will be
displayed and A/C indicator will turn off.)
2. Operate the temperature control buttons to
set the desired temperature.
● The temperature of the passenger compartment will be maintained automatically. Air
flow distribution and fan speed are also controlled automatically.
● Do not set the temperature lower than the
outside air temperature. Otherwise the system may not work properly.
● Not recommended if windows fog up.
Dehumidified defrosting or defogging
1. Press the
front defroster button on.
(The indicator light on the button will come
on.)
2. Operate the temperature control buttons to
set the desired temperature.
● To quickly remove ice from the outside of the
windows, use the fan speed control dial to
set the fan speed to maximum.
● As soon as possible after the windshield is
clean, press the AUTO button to return to
the automatic mode.
front defroster button is
● When the
pressed, the air conditioner will automatically be turned on at outside temperatures
above 36°F (2°C). The air recirculate mode
automatically turns off, allowing outside air
to be drawn into the passenger compartment to further improve the defogging performance.
Monitor, climate, audio, phone and voice recognition systems 4-39
Remote start logic
Air recirculation
Vehicles equipped with automatic climate controls and remote start function may go into automatic heating or cooling mode when remote start
is activated depending on outside and cabin temperatures. During this period, the climate control
display and buttons will be inoperable until ignition switch is turned on.
Press the
air recirculation button to recirculate interior air inside the vehicle.
The air recirculation cannot be activated when
the air conditioner is in the
front defrosting
mode or the
front defrosting and foot outlet mode.
MANUAL OPERATION
Automatic intake air control
Fan speed control
In the AUTO mode, the intake air will be controlled automatically. To manually control the inair recirculation button.
take air, press the
To return to the automatic control mode, press
air recirculation button for
and hold the
about 2 seconds. The indicator light will flash
twice, and then the intake air will be controlled
automatically.
Turn the
fan speed control dial to manually
control the fan speed.
Press the AUTO button to return to automatic
control of the fan speed.
4-40 Monitor, climate, audio, phone and voice recognition systems
Air flow control
Pressing the MODE button manually controls air
flow and selects the air outlet:
— Air flows from center and side
vents.
— Air flows from center and side
vents and foot outlets.
— Air flows mainly from foot outlets.
— Air flows from defroster and foot
outlets.
— Air flows from defroster outlets.
To turn system off
Press the ON-OFF button.
Automatic operation
1. Press the AUTO button. The AUTO indicator
light will illuminate and “AUTO” will appear
on the display.
temperature increase and
2. Press the
decrease buttons (driver’s side) to set the
desired temperature.
Manual operation
● Temperature control
temperature increase and
Press the
decrease buttons (driver’s side) to set the
desired temperature.
LHA3189
Front Controls
To control the rear automatic air conditioning
REAR AUTOMATIC AIR
system with the front air conditioner control
CONDITIONING SYSTEM
panel, press the REAR button. When the rear
1.
(temperature) increase and decrease
automatic air conditioning system control is on,
buttons (driver’s side)
the indicator light on the REAR button will illuminate and the front display will switch to the Rear
2. AUTO button
Air-conditioning screen.
3. REAR button
The rear automatic air conditioning system can
be adjusted with the front air conditioner control
(fan speed) control
4. ON-OFF button/
panel when the Rear Air-conditioning screen is
knob
displayed.
5. A/C button
To adjust the front air conditioning system, press
the REAR button once more. The Rear Airconditioning screen will no longer be displayed.
● Fan speed control
(fan speed) control knob to
Turn the
manually control the fan speed.
Monitor, climate, audio, phone and voice recognition systems 4-41
temperature increase and
4. Press the
decrease buttons (driver’s side) to set the
desired temperature.
● Do not set the temperature lower than the
outside air temperature. Doing so may cause
the temperature to not be controlled properly.
● To dehumidify the air, press the A/C button
before turning on the heater.
Turning the system off
LHA2168
Rear Heating (A/C off)
1. Press the REAR button to display the Rear
Air-conditioning screen on the front display
when the rear automatic air conditioning
system is on.
1. Press the REAR button on the front control
panel until the Rear Air-conditioning screen
is displayed.
2. Press the ON-OFF button. The rear climate
controls will turn OFF.
2. Press the AUTO button. The AUTO indicator
light will illuminate and “AUTO” will appear
on the display.
3. If the A/C indicator light illuminates, press
the A/C button. The A/C indicator light will
turn off.
4-42 Monitor, climate, audio, phone and voice recognition systems
● Fan speed increase and decrease buttons Adjusts the rear fan speed up or down.
● AUTO button Turns rear automatic air conditioning system on, AUTO mode on.
● Temperature increase and decrease
buttons Adjusts the rear temperature up or
down.
OPERATING TIPS
LHA2134
Rear control buttons
1. OFF button
2.
(fan speed increase) button
3. AUTO button
4.
(temperature increase) button
5.
(temperature decrease) button
6. Display
7.
(fan speed decrease) button
Rear Controls
The rear seat passengers can adjust the rear
automatic air conditioning system using the control switches at the rear of the center console.
● When the engine coolant temperature and
outside air temperature are low, the air flow
from the foot outlets may not operate for a
maximum of 150 seconds. However, this is
not a malfunction. After the coolant temperature warms up, air flow from the foot outlets
will operate normally.
The rear control buttons do not function when the
Rear Air-conditioning screen is shown on the
front display. To activate the rear control buttons,
press the REAR button on the front air conditioner control panel and switch the screen on the
front display.
● OFF button Turns rear automatic air conditioning system off.
Monitor, climate, audio, phone and voice recognition systems 4-43
HEATER AND AIR CONDITIONER
(automatic) (Type B) (if so equipped)
LHA2473
The sunload sensor, located on the top driver’s
side of the instrument panel, helps the system
maintain a constant temperature. Do not put anything on or around this sensor.
LHA2447
1.
2.
3.
4.
Air recirculation button
A/C (air conditioner) ON/OFF button
MODE (manual air flow control) button
REAR button
4-44 Monitor, climate, audio, phone and voice recognition systems
5.
6.
Temperature control (passenger’s side)
knob/DUAL (passenger’s side temperature control) ON/OFF button
(rear window and outside mirror
(if so equipped) defroster) button
7.
8.
9.
(fan speed control) dial/ON/OFF
button
(front defroster) button
Temperature control (driver’s side)
knob/AUTO (automatic) climate control
ON button
WARNING
● The air conditioner cooling function operates only when the engine is running.
● Do not leave children or adults who
would normally require the assistance
of others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
others through inadvertent operation of
the vehicle. Also, on hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause
severe or possibly fatal injuries to
people or animals.
● Do not use the recirculation mode for
long periods as it may cause the interior
air to become stale and the windows to
fog up.
Start the engine and operate the controls to
activate the air conditioner.
● Odors from inside and outside the vehicle
can build up in the air conditioner unit. Odor
can enter the passenger compartment
through the vents.
● The temperature of the passenger compartment will be maintained automatically. Air
flow distribution and fan speed are also controlled automatically.
● When parking, set the heater and air conditioner controls to turn off air recirculation to
allow fresh air into the passenger compartment. This should help reduce odors inside
the vehicle.
● A visible mist may be seen coming from the
vents in hot, humid conditions as the air is
cooled rapidly. This does not indicate a malfunction.
AUTOMATIC OPERATION
Cooling and/or dehumidified heating
(AUTO)
This mode may be used all year round as the
system automatically works to keep a constant
temperature. Air flow distribution and fan speed
are also controlled automatically.
1. Press the AUTO button on. (The indicator on
the button will illuminate and AUTO will be
displayed.)
2. Turn the temperature control dial to the left
or right to set the desired temperature.
● Adjust the temperature display to about
75°F (24°C) for normal operation.
3. You can individually set driver’s and front
passenger’s side temperature using each
temperature control dial. When the DUAL
button or passenger’s side temperature dial
is turned, the DUAL indicator will come on.
To turn off the passenger’s side temperature
control, press the DUAL button.
Heating (A/C OFF)
The air conditioner does not activate. When you
need to heat only, use this mode.
1. Press the A/C button. The A/C indicator will
turn off.
2. Turn the temperature control dial to set the
desired temperature.
● The temperature of the passenger compartment will be maintained automatically. Air
flow distribution and fan speed are also controlled automatically.
Monitor, climate, audio, phone and voice recognition systems 4-45
● Do not set the temperature lower than the
outside air temperature. Otherwise, the system may not work properly.
Remote start logic
Automatic intake air control
Vehicles equipped with automatic climate controls and remote start function may go into automatic heating or cooling mode when remote start
is activated depending on outside and cabin temperatures. During this period, the climate control
display and buttons will be inoperable until ignition switch is turned on.
MANUAL OPERATION
In the AUTO mode, the intake air will be controlled automatically. To manually control the inair recirculation button.
take air, press the
To return to the automatic control mode, press
air recirculation button for
and hold the
about 2 seconds. The indicator light will flash
twice, and then the intake air will be controlled
automatically.
2. Turn the temperature control dial to set the
desired temperature.
Fan speed control
Air flow control
● To quickly remove ice from the outside of the
windows, use the fan speed control dial to
set the fan speed to maximum.
Turn the
fan speed control dial to manually
control the fan speed.
Press the AUTO button to return to automatic
control of the fan speed.
● Not recommended if windows fog up.
Dehumidified defrosting or defogging
1. Press the
front defroster button on.
(The indicator light on the button will come
on.)
● As soon as possible after the windshield is
clean, press the AUTO button to return to
the automatic mode.
front defroster button is
● When the
pressed, the air conditioner will automatically be turned on at outside temperatures
above 36°F (2°C). The air recirculate mode
automatically turns off, allowing outside air
to be drawn into the passenger compartment to further improve the defogging performance.
Air recirculation
Press the
air recirculation button to recirculate interior air inside the vehicle.
The air recirculation cannot be activated when
the air conditioner is in the
front defrosting
mode or the
front defrosting and foot outlet mode.
4-46 Monitor, climate, audio, phone and voice recognition systems
Pressing the MODE button manually controls air
flow and selects the air outlet:
— Air flows from center and side
vents.
— Air flows from center and side
vents and foot outlets.
— Air flows mainly from foot outlets.
— Air flows from defroster and foot
outlets.
— Air flows from defroster outlets.
2. Turn the temperature control knob (driver’s
side) to set the desired temperature.
Manual operation
● Temperature control
Turn the temperature control knob to set the
desired temperature.
● Fan speed control
(fan speed) control knob to
Turn the
manually control the fan speed.
LHA3191
Front Controls
Rear automatic air conditioning system automatic air conditioning system control is on,
the front display will switch to the Rear Air1. A/C button
conditioning screen.
The rear automatic air conditioning system can
2. REAR button
be adjusted with the front air conditioner control
(fan speed) control
3. ON-OFF button/
panel when the Rear Air-conditioning screen is
knob
displayed.
4. AUTO button/temperature control knob
(driver’s side)
To control the rear automatic air conditioning
system with the front air conditioner control
panel, press the REAR button. When the rear
To adjust the front air conditioning system, press
the REAR button one more time.
Automatic operation
1. Press the AUTO button. The AUTO indicator
light will illuminate and “AUTO” will appear
on the display.
Monitor, climate, audio, phone and voice recognition systems 4-47
● Do not set the temperature lower than the
outside air temperature. Doing so may cause
the temperature to not be controlled properly.
● To dehumidify the air, press the A/C button
before turning on the heater.
Turning the system off
1. Press the REAR button on the front control
panel until the Rear Air-conditioning screen
is displayed.
LHA2168
fan speed
2. Press the ON-OFF button/
control dial. The rear climate controls will
turn OFF.
Rear Heating (A/C off)
1. Press the REAR button to display the Rear
Air-conditioning screen on the front display
when the rear automatic air conditioning
system is on.
2. Press the AUTO button. The AUTO indicator
light will illuminate and “AUTO” will appear
on the display.
3. If the A/C indicator light illuminates, press
the A/C button. The A/C indicator light will
turn off.
4. Turn the temperature control dial to set the
desired temperature.
4-48 Monitor, climate, audio, phone and voice recognition systems
● AUTO button Turns rear automatic air conditioning system on, AUTO mode on.
● Temperature increase and decrease
buttons Adjusts the rear temperature up or
down.
To turn system off
Press the ON-OFF button.
OPERATING TIPS
LHA2134
Rear control buttons
1. OFF button
2.
(fan speed increase) button
3. AUTO button
4.
(temperature increase) button
5.
(temperature decrease) button
6. Display
7.
(fan speed decrease) button
Rear Controls
The rear seat passengers can adjust the rear
automatic air conditioning system using the control switches at the rear of the center console.
● When the engine coolant temperature and
outside air temperature are low, the air flow
from the foot outlets may not operate for a
maximum of 150 seconds. However, this is
not a malfunction. After the coolant temperature warms up, air flow from the foot outlets
will operate normally.
The rear control buttons do not function when the
Rear Air-conditioning screen is shown on the
front display. To activate the rear control buttons,
press the REAR button on the front air conditioner control panel and switch the screen on the
front display.
● OFF button Turns rear automatic air conditioning system off.
● Fan speed increase and decrease buttons Adjusts the rear fan speed up or down.
Monitor, climate, audio, phone and voice recognition systems 4-49
SERVICING AIR CONDITIONER
AUDIO SYSTEM
The air conditioner system in your NISSAN vehicle is charged with a refrigerant designed with
the environment in mind.
RADIO
This refrigerant does not harm the earth’s
ozone layer.
Special charging equipment and lubricant is required when servicing your NISSAN air conditioner. Using improper refrigerants or lubricants
will cause severe damage to your air conditioner
system. For additional information, refer to “Air
conditioner system refrigerant and oil recommendations” in the “Technical and consumer information” section of this manual.
LHA2473
The sunload sensor, located on the top driver’s
side of the instrument panel, helps the system
maintain a constant temperature. Do not put anything on or around this sensor.
A NISSAN dealer is able to service your “environmentally friendly” air conditioning system.
WARNING
The air conditioner system contains refrigerant under high pressure. To avoid personal injury, any air conditioner service
should be done only by an experienced
technician with proper equipment.
4-50 Monitor, climate, audio, phone and voice recognition systems
Place the ignition switch in the ACC or ON
position and press the VOL (volume)/ON·OFF
(power) knob to turn the radio on. If you listen to
the radio with the engine not running, the ignition
switch should be placed in the ACC position.
Radio reception is affected by station signal
strength, distance from radio transmitter, buildings, bridges, mountains and other external influences. Intermittent changes in reception quality
normally are caused by these external influences.
Using a cellular phone in or near the vehicle
may influence radio reception quality.
Radio reception
Your NISSAN radio system is equipped with
state-of-the-art electronic circuits to enhance radio reception. These circuits are designed to
extend reception range, and to enhance the quality of that reception.
However, there are some general characteristics
of both FM and AM radio signals that can affect
radio reception quality in a moving vehicle, even
when the finest equipment is used. These characteristics are completely normal in a given reception area and do not indicate any malfunction
in your NISSAN radio system.
Reception conditions will constantly change because of vehicle movement. Buildings, terrain,
signal distance and interference from other vehicles can work against ideal reception. Described below are some of the factors that can
affect your radio reception.
Some cellular phones or other devices may
cause interference or a buzzing noise to come
from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise.
Static and flutter: During signal interference from
buildings, large hills or due to antenna position
(usually in conjunction with increased distance
from the station transmitter), static or flutter can
be heard. This can be reduced by adjusting the
treble control to reduce treble response.
FM RADIO RECEPTION
AM RADIO RECEPTION
Range: FM range is normally limited to 25 – 30 mi
(40 – 48 km), with monaural (single channel) FM
having slightly more range than stereo FM. External influences may sometimes interfere with FM
station reception even if the FM station is within
25 mi (40 km). The strength of the FM signal is
directly related to the distance between the
transmitter and receiver. FM signals follow a lineof-sight path, exhibiting many of the same characteristics as light. For example, they will reflect
off objects.
AM signals, because of their low frequency, can
bend around objects and skip along the ground.
In addition, the signals can be bounced off the
ionosphere and bent back to earth. Because of
these characteristics, AM signals are also subject to interference as they travel from transmitter
to receiver.
Fade and drift: As your vehicle moves away from
a station transmitter, the signals will tend to fade
and/or drift.
Multipath reception: Because of the reflective
characteristics of FM signals, direct and reflected
signals reach the receiver at the same time. The
signals may cancel each other, resulting in momentary flutter or loss of sound.
Fading: Occurs while the vehicle is passing
through freeway underpasses or in areas with
many tall buildings. It can also occur for several
seconds during ionospheric turbulence even in
areas where no obstacles exist.
Static: Caused by thunderstorms, electrical
power lines, electric signs and even traffic lights.
SATELLITE RADIO RECEPTION (if so
equipped)
When the satellite radio is used for the first time
or the battery has been replaced, the satellite
radio may not work properly. This is not a malfunction. Wait more than 10 minutes with satellite
radio ON and the vehicle outside of any metal or
large building for satellite radio to receive all of
the necessary data.
The satellite radio mode will be skipped unless an
optional satellite receiver and antenna are installed and a SiriusXM® Satellite Radio service
subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam.
Satellite radio performance may be affected if
cargo carried on the roof blocks the satellite radio
signal.
If possible, do not put cargo over the satellite
antenna.
A build up of ice on the satellite radio antenna can
affect satellite radio performance. Remove the
ice to restore satellite radio reception.
XM® is a registered trademark of SiriusXM®
Satellite Radio, Inc.
Monitor, climate, audio, phone and voice recognition systems 4-51
Compact disc (CD) player (models
without Navigation System)
CAUTION
● Do not force a compact disc into the CD
insert slot. This could damage the CD
and/or CD changer/player.
LHA0099
AUDIO OPERATION PRECAUTIONS
● The CD player sometimes cannot function when the compartment temperature is extremely high or low.
Decrease/increase the temperature
before use.
● Do not expose the CD to direct sunlight.
● Trying to load a CD with the CD door
closed could damage the CD and/or CD
changer.
● CDs that are in poor condition or are
dirty, scratched or covered with fingerprints may not work properly.
● Only one CD can be loaded into the CD
player at a time.
● The following CDs may not work properly:
● Only use high quality 4.7 in (12 cm)
round discs that have the “COMPACT
disc DIGITAL AUDIO” logo on the disc
or packaging.
● Copy control compact discs (CCCD)
● During cold weather or rainy days, the
player may malfunction due to the humidity. If this occurs, remove the CD
and dehumidify or ventilate the player
completely.
● Do not use the following CDs as they
may cause the CD player to malfunction:
● The player may skip while driving on
rough roads.
● Recordable compact discs (CD-R)
● Rewritable compact discs (CD-RW)
● 3.1 in (8 cm) discs with an adapter
● CDs that are not round
● CDs with a paper label
● CDs that are warped, scratched, or
have abnormal edges
4-52 Monitor, climate, audio, phone and voice recognition systems
● This audio system can only play prerecorded CDs. It has no capability to
record or burn CDs.
● If the CD cannot be played, one of the
following messages will be displayed.
CHECK DISC:
● Confirm that the CD is inserted correctly (the label side is facing up,
etc.).
● Confirm that the CD is not bent or
warped and it is free of scratches.
PRESS EJECT:
This is an error due to excessive temperature inside the player. Remove the
CD by pressing the EJECT button. After
a short time, reinsert the CD. The CD
can be played when the temperature of
the player returns to normal.
UNPLAYABLE:
The file is unplayable in this audio system (only MP3 or WMA (if so equipped)
CD).
CD/DVD combination player (models
with Navigation System)
● Do not force a disc into the CD/DVD
insert slot. This could damage the
CD/DVD player.
● During cold weather or rainy days, the
player may malfunction due to the humidity. If this occurs, remove the
CD/DVD and dehumidify or ventilate
the player completely.
● The player may skip while driving on
rough roads.
● The CD/DVD player sometimes cannot
function when the passenger compartment temperature is extremely high.
Decrease the temperature before use.
● Only use high quality 4.7 in (12 cm)
round discs that have the “COMPACT
disc DIGITAL AUDIO” or “DVD Video”
logo on the disc or packaging.
● Do not expose the CD/DVD to direct
sunlight.
● CDs/DVDs that are of poor quality,
dirty, scratched, covered with fingerprints, or that have pinholes may not
work properly.
● The following CDs/DVDs are not guaranteed to play:
● Copy control compact discs (CCCD)
● Recordable compact discs (CD-R)
● Rewritable compact discs (CD-RW)
● Recordable compact discs (DVD±R,
DVD±R DL)
● Rewritable
compact
(DVD±RW, DVD±RW DL)
discs
● Do not use the following CDs/DVDs as
they may cause the CD/DVD player to
malfunction.
● 3.1 in (8 cm) discs
● CDs/DVDs that are not round
● CDs/DVDs with a paper label
● CDs/DVDs
that
are
warped,
scratched, or have abnormal edges
● This audio system can only play prerecorded CDs/DVDs. It has no capabilities to record or burn CDs/DVDs.
● If the CD/DVD cannot be played, one of
the following messages will be displayed.
Monitor, climate, audio, phone and voice recognition systems 4-53
Disc Read Error:
Region Invalid
● Confirm that the CD/DVD is inserted
correctly (the label side is facing up,
etc.).
● The DVD is not for region 1 or all
regions.
● Confirm that the CD/DVD is not bent
or warped and it is free of scratches.
Please Eject Disc:
This error may be due to the temperature inside the player getting too high.
Remove the CD/DVD by pushing the
EJECT button, and after a short time
reinsert the CD/DVD. The CD/DVD can
be played when the temperature of the
player returns to normal. If the error
persists, consult your local retailer.
● Use DVDs with a region code “1”,
“ALL” or “1 included” for your DVD
entertainment system. (The region
A is displayed as a small symcode 䊊
bol printed on the top of the DVD
B .) This vehicle-installed DVD
䊊
player cannot play DVDs with a region code other than “1” or “ALL”.
Unplayable File:
● The file may be copy protected.
● The file is not MP3, WMA, AAC, M4A
or DIVX type.
LHA0484
Copyright and trademark
● The technology protected by the U.S.
patent and other intellectual property
rights
owned
by
Macrovision
Corporation and other right holders is
adopted for this system.
4-54 Monitor, climate, audio, phone and voice recognition systems
● This copyright protected technology
cannot be used without a permit from
Macrovision Corporation. It is limited
to personal use, etc., as long as the
permit from Macrovision Corporation
is not issued.
● Modifying or disassembling is prohibited.
● Dolby digital is manufactured under license from Dolby Laboratories, Inc.
”
● Dolby and the double D mark “
are trademarks of Dolby Laboratories,
Inc.
”
● DTS and DTS Digital Surround “
are registered trademarks of Digital
Theater Systems, Inc.
USB (Universal Serial Bus)
Connection Port
WARNING
Do not connect, disconnect, or operate the
USB device while driving. Doing so can be
a distraction. If distracted you could lose
control of your vehicle and cause an accident or serious injury.
CAUTION
● Do not force the USB device into the
USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the port. Make sure that the
USB device is connected correctly into
the USB port.
● Do not grab the USB port cover (if so
equipped) when pulling the USB device
out of the port. This could damage the
port and the cover.
● Do not leave the USB cable in a place
where it can be pulled unintentionally.
Pulling the cable may damage the port.
The vehicle is not equipped with a USB device.
USB devices should be purchased separately as
necessary.
This system cannot be used to format USB devices. To format a USB device, use a personal
computer.
In some states/area, the USB device for the front
seats plays only sound without images for regulatory reasons, even when the vehicle is parked.
This system supports various USB memory devices, USB hard drives and iPod® players. Some
USB devices may not be supported by this system.
● Partitioned USB devices may not play correctly.
● Some characters used in other languages
(Chinese, Japanese, etc.) may not appear
properly in the display. Using English language characters with a USB device is recommended.
General notes for USB use
● Refer to your device manufacturer’s owner
information regarding the proper use and
care of the device.
Notes for iPod® use
iPod® is a trademark of Apple Inc., registered in
the U.S. and other countries.
● Improperly plugging in the iPod® may cause
a check mark to be displayed on and off
(flickering). Always make sure that the
iPod® is connected properly.
● An iPod® nano (1st Generation) may remain
in fast forward or rewind mode if it is connected during a seek operation. In this case,
please manually reset the iPod®.
● An iPod® nano (2nd Generation) will continue to fast-forward or rewind if it is disconnected during a seek operation.
Monitor, climate, audio, phone and voice recognition systems 4-55
● An incorrect song title may appear when the
Play Mode is changed while using an iPod®
nano (2nd Generation).
● Audiobooks may not play in the same order
as they appear on an iPod®.
● Large video files cause slow responses in an
iPod®. The vehicle center display may momentarily black out, but will soon recover.
● If an iPod® automatically selects large video
files while in the shuffle mode, the vehicle
center display may momentarily black out,
but will soon recover.
Bluetooth® streaming audio (if so
equipped)
● Some Bluetooth® audio devices may not be
recognized by the in-vehicle audio system.
● It is necessary to set up the wireless connection between a compatible Bluetooth®
audio device and the in-vehicle Bluetooth®
module before using the Bluetooth® audio.
● Receiving a call on the Hands-Free
Phone System.
● Checking the connection to the handsfree phone.
● Do not place the Bluetooth® audio device in
an area surrounded by metal or far away from
the in-vehicle Bluetooth® module to prevent
tone quality degradation and wireless connection disruption.
● While an audio device is connected through
the Bluetooth® wireless connection, the
battery power of the device may discharge
quicker than usual.
● This system supports the Bluetooth® Audio
Distribution Profile (A2DP, AVRCP).
BLUETOOTH® is a
trademark owned by
Bluetooth SIG, Inc.
and licensed to
Clarion Co., Ltd.
● Operating procedure of the Bluetooth® audio will vary depending on the devices. Make
sure how to operate your audio device before using it with this system.
CD or USB with Compressed Audio
Files (models without Navigation
System)
● The Bluetooth® audio may be stopped under the following conditions:
The file types supported by this system are MP3
and WMA.
4-56 Monitor, climate, audio, phone and voice recognition systems
Explanation of terms
● MP3 — MP3 is short for Moving Pictures
Experts Group Audio Layer 3. MP3 is the
most well-known compressed digital audio
file format. This format allows for near “CD
quality” sound, but at a fraction of the size of
normal audio files. MP3 conversion of an
audio track from CD-ROM can reduce the
file size by approximately a 10:1 ratio with
virtually no perceptible loss in quality. MP3
compression removes the redundant and
irrelevant parts of a sound signal that the
human ear doesn’t hear.
● WMA — Windows Media Audio (WMA)* is a
compressed audio format created by Microsoft as an alternative to MP3. The WMA
codec offers greater file compression than
the MP3 codec, enabling storage of more
digital audio tracks in the same amount of
space when compared to MP3s at the same
level of quality.
● Bit rate — Bit rate denotes the number of
bits per second used by a digital music file.
The size and quality of a compressed digital
audio file is determined by the bit rate used
when encoding the file.
● Sampling frequency — Sampling frequency
is the rate at which the samples of a signal
are converted from analog to digital (A/D
conversion) per second.
● If there is a file in the top level of the disc,
“Root Folder” is displayed.
● The playback order is the order in which the
files were written by the writing software.
Therefore, the files might not play in the
desired order.
● Multisession — Multisession is one of the
methods for writing data to media. Writing
data once to the media is called a single
session, and writing more than once is called
a multisession.
● ID3/WMA Tag — The ID3/WMA tag is the
part of the encoded MP3 or WMA file that
contains information about the digital music
file such as song title, artist, encoding bit
rate, track time duration, etc. ID3 tag information is displayed on the Artist/song title
line on the display.
* Windows®, Windows Media® and Windows
Vista® are registered trademarks and trademarks in the United States of America and other
countries of Microsoft Corporation of the USA.
WHA1078
Playback order chart
Playback order
Music playback order of a CD with MP3 or WMA
files is as illustrated.
● The names of folders not containing MP3 or
WMA files are not shown in the display.
Monitor, climate, audio, phone and voice recognition systems 4-57
Specification chart
Supported media
Supported file systems
MP3
Supported
versions
WMA*1
Version
Sampling frequency
Bit rate
Version
Sampling frequency
Bit rate
Tag information (Song title and artist name)
Folder levels
Text character number limitation
Displayable character codes*3
CD, CD-R, CD-RW, USB 2.0
CD, CD-R, CD-RW, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet
* ISO9660 Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a Windows Vista® operating system-based
computer) are not supported.
UDF Bridge (UDF 1.02 + ISO9660), UDF 1.5, UDF 2.0
VDF 1.5/VDF 2.0 (packet writing) is not supported.
USB memory: FAT16, FAT32
MPEG1, MPEG2, MPEG2.5
8 kHz - 48 kHz
8 kbps - 320 kbps, VBR*2
WMA7, WMA8
8 kHz - 48 kHz
8 kbps - 320 kbps, VBR*2
ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER 2.4 (MP3 only)
WMA tag (WMA only)
Folder levels: 8, Folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)
64 characters
01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 LE), 04: UNICODE (UTF-16 BE), 05: UNICODE (UTF-8)
*1 Protected WMA files (DRM) cannot be played.
*2 When VBR files are played, the playback time may not be displayed correctly.
*3 Available codes depend on what kind of media, versions and information are going to be displayed.
4-58 Monitor, climate, audio, phone and voice recognition systems
Troubleshooting guide
Symptom
Cannot play
Poor sound quality
It takes a relatively long time
before the music starts
playing.
Music cuts off or skips
Skipping with high bit rate
files
Moves immediately to the
next song when playing
Songs do not play back in
the desired order
Cause and Countermeasure
Check if the CD/USB device is inserted correctly.
Check if the CD is scratched or dirty.
Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.
If there is a mixture of music CD files (CD-DA data) and compressed audio files on a CD, only the music CD files (CD-DA data) will be played.
Files with extensions other than “.MP3” or “.WMA” cannot be played. In addition, the character codes and number of characters for folder names and
file names should be in compliance with the specifications.
Check if the disc or file is generated in an irregular format. This may occur depending on the variation or the setting of the compressed audio file writing application or other text editing applications.
Check if the finalization process, such as session close and disc close, is done for the disc.
Check if the CD/USB device is protected by copyright.
Check if the CD is scratched or dirty.
If there are many folders or file levels on the CD/USB device, or if it is a multisession disc, some time may be required before the music starts playing.
The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not match the
specifications. Try using the slowest writing speed.
Skipping may occur with large quantities of data, such as for high bit rate data.
If an unsupported compressed audio file has been given a supported extension like “.MP3”, or when play is prohibited by copyright protection, the
player will skip to the next song.
The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order.
Random/Shuffle may be active on the audio system or on the USB device.
Monitor, climate, audio, phone and voice recognition systems 4-59
CD, DVD or USB with Compressed
Audio Files (models with Navigation
System)
The file types supported by this system are MP3,
WMA, AAC/M4A and ATRAC3.
Explanation of terms
● MP3 — MP3 is short for Moving Pictures
Experts Group Audio Layer 3. MP3 is the
most well known compressed digital audio
file format. This format allows for near “CD
quality” sound, but at a fraction of the size of
normal audio files. MP3 conversion of an
audio track can reduce the file size by approximately 10:1 ratio (Sampling: 44.1 kHz,
Bit rate: 128 kbps) with virtually no perceptible loss in quality. The compression reduces certain parts of sound that seem inaudible to most people.
● WMA — Windows Media Audio (WMA) is a
compressed audio format created by Microsoft as an alternative to MP3. The WMA
codec offers greater file compression than
the MP3 codec, enabling storage of more
digital audio tracks in the same amount of
space when compared to MP3s at the same
level of quality.*
● AAC/M4A — Advanced Audio Coding
(AAC) is a lossy audio compression format.
Audio files that have been encoded with
AAC are generally smaller in size and deliver
a higher quality of sound than MP3.
● ATRAC3, ATRAC3 Plus — Adaptive Transform Acoustic Coding (ATRAC) is a lossy
audio compression format developed by
Sony.
● Bit rate — Bit rate denotes the number of
bits per second used by a digital music file.
The size and quality of a compressed digital
audio file is determined by the bit rate used
when encoding the file.
● Sampling frequency — Sampling frequency
is the rate at which the samples of a signal
are converted from analog to digital (A/D
conversion) per second.
● Multisession — Multisession is one of the
methods for writing data to media. Writing
data once to the media is called a single
session, and writing more than once is called
a multisession.
4-60 Monitor, climate, audio, phone and voice recognition systems
● ID3/WMA Tag — The ID3/WMA tag is the
part of the encoded MP3 or WMA file that
contains information about the digital music
file such as song title, artist, album title,
encoding bit rate, track time duration, etc.
ID3 tag information is displayed on the
Album/Artist/Track title line on the display.
* Windows®, Windows Media® and Windows
Vista® are registered trademarks or trademarks
of Microsoft Corporation in the United States of
America and/or other countries.
● The folder names of folders not containing
compressed audio files are not shown in the
display.
● If there is a file in the top level of the
disc/USB, “Root Folder” is displayed.
● The playback order is the order in which the
files were written by the writing software, so
the files might not play in the desired order.
WHA1374
Playback order chart
Playback order
Music playback order of a CD, DVD or USB
device with compressed audio files is as illustrated.
Monitor, climate, audio, phone and voice recognition systems 4-61
Specification chart
Supported media
Supported file systems
MP3
Supported
versions*1
WMA*2
AAC
ATRAC
Version
Sampling frequency
Bit rate
Version
Sampling frequency
Bit rate
Sampling frequency
Bit rate
Version
Tag information (Song title and artist name)
Folder levels
Text character number limitation
Displayable character codes*3
CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0
CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet
* ISO9660 Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a Windows Vista® operating system-based computer) are not supported.
UDF Bridge (UDF 1.02 + ISO9660), UDF 1.5, UDF 2.0
* VDF 1.5/VDF 2.0 (packet writing) is not supported.
USB memory: FAT16, FAT32
MPEG1, MPEG2, MPEG2.5
8 kHz - 48 kHz
8 kbps - 320 kbps, VBR*4
WMA7, WMA8, WMA9
32 kHz - 48 kHz
32 kbps - 192 kbps, VBR*4
8 kHz - 96 kHz
16 kbps - 320 kbps, VBR*4
ATRAC3, ATRAC3 Plus
ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER 2.4 (MP3 only)
WMA tag (WMA only)
Folder levels: 8, Folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder)
128 characters
01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF 16 BOM Little Endian), 07: SHIFT-JIS
*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.
*2 Protected WMA files (DRM) cannot be played.
*3 Available codes depend on what kind of media, versions and information are going to be displayed.
*4 When VBR files are played, the playback time may not be displayed correctly.
4-62 Monitor, climate, audio, phone and voice recognition systems
Troubleshooting guide
Symptom
Cannot play
Poor sound quality
It takes a relatively long time
before the music starts
playing.
Music cuts off or skips
Skipping with high bit rate
files
Moves immediately to the
next song when playing
Songs do not play back in
the desired order
Cause and Countermeasure
Check if the CD/DVD/USB device was inserted correctly.
Check if the CD/DVD is scratched or dirty.
Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.
If there is a mixture of music CD files (CD-DA data) and compressed audio files on a CD, only the music CD files (CD-DA data) will be played.
Files with extensions other than “.MP3”, “.WMA”, “.AAC”, “.M4A” or “.AA3” cannot be played. In addition, the character codes and number of characters for folder names and file names should be in compliance with the specifications.
Check if the disc or file is generated in an irregular format. This may occur depending on the variation or the setting of the compressed audio file writing application or other text editing applications.
Check if the finalization process, such as session close and disc close, is done for the disc.
Check if the CD/DVD/USB device is protected by copyright.
Check if the CD/DVD is scratched or dirty.
If there are many folders or file levels on the CD/DVD/USB device, or if it is a multisession disc, some time may be required before the music starts
playing.
The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not match the
specifications. Try using the slowest writing speed.
Skipping may occur with large quantities of data, such as for high bit rate data.
If an unsupported compressed audio file has been given a supported extension like “.MP3”, or when play is prohibited by copyright protection, the
player will skip to the next song.
The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order.
Random/Shuffle may be active on the audio system or on the USB device.
Monitor, climate, audio, phone and voice recognition systems 4-63
Compressed Video Files (models with
Navigation System)
Explanation of terms
● DivX – DivX refers to the DivX® codec
owned by Div, Inc. used for a lossy compression of video based on MPEG-4.
● AVI – AVI stands for Audio Video Interleave.
It is standard file format originated by Microsoft Corporation. A .divx encoded file can be
saved into the .avi file format for playback on
this system if it meets the requirements
stated in the table in this section. However,
all .avi files are not playable on this system
since different encodings can be used other
than the DivX® codec.
● ASF – ASF stands for Advanced Systems
Format. It is a file format owned by Microsoft
Corporation. Note: Only .asf files that meet
the requirements stated in the table in this
section can be played.
● Bit rate — Bit rate denotes the number of
bits per second used by a digital video files.
The size and quality of a compressed digital
audio file is determined by the bit rate used
when encoding the file.
4-64 Monitor, climate, audio, phone and voice recognition systems
Requirements for Supporting Video Playback
Media
File Systems
File Types
Bit Rates
Resolution
CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory
CD, CD-R, CD-RW, DVD,
ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660), UDF1.5, UDF2.0
DVD±R, DVD±RW, DVD±RW
* ISO9660 Level 3 (packet writing) is not supported.
DL
* Files saved using the Live File System component (on a Windows Vista®-based computer) are not supported.
* VDF1.5/VDF2.0 (packet writing) is not supported.
USB Memory
FAT16, FAT32
.divx, .avi
Video Codecs
DivX3, DivX4, DivX5, DivX6
Audio Codecs
MP3, MPEG2.5 Audio Layer3, AC3, LPCM
.asf
Video Codec
ISO-MPEG4
Audio Codec
G.726
.divx, .avi
Maximum Average
4 Mbps
Maximum Peak
8 Mbps
.divx, .avi
Minimum
32 x 32
Maximum
720 x 480
.asf
Minimum
32 x 32
Maximum
720 x 576
Monitor, climate, audio, phone and voice recognition systems 4-65
6. AUX IN jack
7. AUX button
8.
TRACK button
9.
SEEK/CAT button
10. DISC button
11. RPT (repeat)/RDM (random) button
12. SCAN button
13. AM·FM button
14. DISP (display)/CLOCK button
For additional information on all operation precautions, refer to ⬙Audio operation precautions⬙
in this section.
Audio main operation
VOL/ON·OFF control
LHA2104
FM/AM RADIO WITH COMPACT
DISC (CD) CHANGER (if so
equipped)
1.
CD eject button
2. VOL (volume)/ON·OFF control knob
3. Station and CD select (1 - 6) buttons
4. LOAD CD button
5. TUNE/FOLDER and AUDIO control knob
(Bass, Treble, Fade, Balance, SSV (if so
equipped), and Beep)
4-66 Monitor, climate, audio, phone and voice recognition systems
Place the ignition switch in the ACC or ON
position and push the VOL/ON·OFF control knob
while the system is off to call up the mode (radio
or CD) that was playing immediately before the
system was turned off.
To turn the system off, press the VOL/ON·OFF
control knob.
Turn the VOL/ON·OFF control knob to adjust the
volume.
Audio settings
Audio
Bass
Treble
Balance
Fade
Adjusts the bass to the desired level.
Adjusts the treble to the desired level.
Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers.
Adjusts the fade to the desired level. Fade adjusts the sound level between the front and rear speakers.
Bass, treble, balance and fade can also be adjusted by pressing the AUDIO control knob and turning it to select the item to adjust. When the desired item
is shown on the display, turn the tuning to adjust and then press the AUDIO button until the display returns to the main audio screen. If the button is not
pressed for approximately 10 seconds, the radio or CD display will automatically reappear.
Monitor, climate, audio, phone and voice recognition systems 4-67
CD display mode
To change the text displayed while playing a CD
with text, press the DISP/CLOCK button. The
DISP/CLOCK button will allow you to scroll
through CD text as follows: Track number and
Track time ←→ Album title ←→ Song title.
● Track number displays the track number selected on the disc.
● Track time displays the amount of time the
track has played.
● Folder number displays the number of the
current folder on the MP3 CD.
● Folder title displays the title of the folder.
● Song title displays the title of the song playing.
TUNE/FOLDER (Tuning) knob
● Artist name displays the name of the artist of
the song playing.
To manually tune the radio, turn
TUNE/FOLDER knob to the right or left.
● Album title displays the title of the album of
the song playing.
● Album title displays the title of the CD being
played.
FM/AM radio operation
● Song title displays the title of the selected
CD track.
Pressing the AM·FM button will change the band
as follows:
FM/AM band select
MP3 display mode
AM → FM1 → FM2 → AM
To change the text displayed when listening to a
CD with MP3s and ID3 tags, press the
DISP/CLOCK button. The DISP/CLOCK button
will scroll through the CD text as follows: Disc
number, Track number and Folder number ←→
Folder title ←→ Song title ←→ Artist name ←→
Album title.
When the AM·FM button is pressed while the
ignition switch is in the ACC or ON position, the
radio will come on at the station last played.
● Disc number displays the number of the
current disc playing.
● Track number displays the number of the
track playing on the selected disc.
The FM stereo indicator ST will illuminate during
FM stereo reception. When the stereo broadcast
signal is weak, the radio will automatically change
from stereo to monaural reception.
The last station played will also come on when
the VOL/ON·OFF control knob is pressed ON.
If a compact disc is playing when the AM·FM
button is pressed, the compact disc will automatically be turned off and the last radio station
played will come on.
4-68 Monitor, climate, audio, phone and voice recognition systems
the
SEEK/CAT and TRACK
tuning buttons
Press the SEEK/CAT
button or the
button to tune from high to low or
TRACK
low to high frequencies and stop at the next
broadcasting station.
SCAN tuning
Press the SCAN button to stop at each broadcasting station for 5 seconds. Pressing the
SCAN button again during this 5-second period
will stop scan tuning and the radio will remain
tuned to that station. If the SCAN button is not
pressed within 5 seconds, scan tuning moves to
the next station.
1 to 6 Station memory operations
Twelve stations can be set for the FM band (6 for
FM1, 6 for FM2) and six stations can be set for
the AM band.
1. Choose the radio band AM, FM1 or FM2
using the AM·FM select button.
2. Tune to the desired station using manual,
SEEK or SCAN tuning. Press and hold any
of the desired station memory buttons (1 –
6) until a beep sound is heard.
3. The channel indicator will then come on and
the sound will resume. Programming is now
complete.
4. Other buttons can be set in the same manner.
If the battery cable is disconnected or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
Compact disc (CD) changer operation
Place the ignition switch in the ACC or ON
position and press the LOAD button, then press
one of the CD insert (1 – 6) slots. Insert the
compact disc into the slot with the label side
facing up. The compact disc will be guided automatically into the slot and start playing.
If the radio is already operating, it will automatically turn off and the compact disc will play.
If the system has been turned off while a compact
disc was playing, pressing the VOL/ON·OFF
control knob will start the compact disc.
LOAD button
To insert a CD in the CD changer, press the
LOAD button for less than 1.5 seconds. Select
the loading slot by pressing the CD insert select
button (1 – 6), then insert the CD.
To insert 6 CDs to the CD changer, press the
LOAD button for more than 1.5 seconds.
The slot numbers (1 – 6) will illuminate on the
display when CDs are loaded into the changer.
DISC button
When the DISC button is pressed with the system off and a compact disc loaded, the system
will turn on and the compact disc will start to play.
When the DISC button is pressed with a compact disc loaded with the radio playing, the radio
will automatically be turned off and the compact
disc will start to play.
SEEK/CAT and TRACK
buttons
button is pressed
When the SEEK/CAT
while a compact disc is playing, the track being
played returns to its beginning. Press several
times to skip back through tracks. The compact
disc will go back the number of times the button
is pressed.
button is pressed while
When the TRACK
the compact disc is playing, the next track will
start to play from its beginning. Press several
times to skip through tracks. The compact disc
will advance the number of times the button is
pressed. (When the last track on the compact
disc is skipped through, the first track will be
played.)
SEEK/CAT and TRACK
(Rewind·Fast Forward)
buttons
(rewind)
Press and hold the SEEK/CAT
button or the TRACK
(fast forward) button
while a compact disc is playing, the compact disc
will play while rewinding or fast forwarding. When
the button is released, the compact disc will
return to normal play speed.
TUNE/FOLDER knob
While playing an MP3/WMA CD, turn the
TUNE/FOLDER knob right or left to scan forward
or backward through available folders.
CD select buttons
To play another CD that has been loaded, press a
CD select button (1 – 6).
Monitor, climate, audio, phone and voice recognition systems 4-69
RPT (repeat)/RDM (random) button
When the RPT (repeat)/RDM (random) button is
pressed while the compact disc is playing, the
play pattern can be changed as follows:
CD
All Disc Repeat → 1 Disc Repeat → 1 Track
Repeat → All Disc Random → 1 Disc Random →
All Disc Repeat
MP3/WMA CD
All Disc Repeat → 1 Disc Repeat → 1 Folder
Repeat → 1 Track Repeat → All Disc Random →
1 Disc Random → 1 Folder Random → All Disc
Repeat
All Disc Repeat: All discs loaded will be repeated.
1 Disc Repeat: The disc that is currently playing
will be repeated.
1 Track Repeat: The track that is currently playing
will be repeated.
1 Folder Repeat: The folder that is currently being
accessed will be repeated.
All Disc Random: All discs loaded will be played
in a mixed order.
1 Disc Random: The tracks on the disc that is
currently playing will be played in a mixed order.
1 Folder Random: The tracks in the folder that is
currently being accessed will be played in a
mixed order.
SCAN button
While listening to a CD, press the SCAN button
to preview the first 10 seconds of each track on
the CD playing. Pressing the SCAN button again
during this 10 second period stops the scan and
the CD remains on that track.
CD EJECT
Current/Selected disc:
button, then press the slot
● Press the
number (1 – 6) for the desired disc. The
compact disc will be ejected. If no slot number (1 – 6) is pressed, the current loaded
disc will be ejected. If the ejected disc is not
removed within 15 seconds, the disc will
reload.
All discs:
button for more
● Press and hold the
than 1.5 seconds. The compact discs will be
ejected one by one. If a disc is not removed
button is
within 15 seconds or the
pressed again during the eject sequence,
the entire disc eject sequence will be canceled.
When this button is pressed while a compact
disc is being played, the compact disc will eject
and the last source will be played.
4-70 Monitor, climate, audio, phone and voice recognition systems
CD IN indicator
The slot numbers (1 – 6) will illuminate if CDs
have been loaded into the changer in CD mode
only.
AUX IN jack
The AUX IN jack is located on the CD changer.
The AUX IN audio input jack accepts any standard analog audio input, such as from a portable
cassette tape player, MP3 player or a laptop
computer.
Press the AUX button to play a compatible device
when it is plugged into the AUX IN jack.
5. AUX button*
6.
TRACK button
7.
SEEK/CAT button
8. DISC button
9. RPT (repeat)/RDM (random) button
10. SCAN button
11. AM-FM button
*No satellite radio reception is available when the
AUX button is pressed to access satellite radio
stations unless optional satellite receiver and antenna are installed and a SiriusXM® Satellite
Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam.
For all operation precautions, refer to ⬙Audio operation precautions⬙ in this section.
Audio main operation
VOL/ON·OFF control
LHA3181
FM/AM/SAT RADIO WITH
COMPACT DISC (CD) PLAYER (if so
equipped)
1.
CD eject button
2. ON-OFF control knob/VOL (volume) control
knob
3. Station select (1–6) buttons
4. AUDIO
knob
button/TUNE/FOLDER
control
Place the ignition switch in the ACC or ON
position and push the VOL/ON·OFF control knob
while the system is off to call up the mode that
was playing immediately before the system was
turned off.
To turn the system off, press the VOL/ON·OFF
control knob.
Monitor, climate, audio, phone and voice recognition systems 4-71
Turn the VOL/ON·OFF control knob to adjust the
volume.
This vehicle has Speed Sensitive Volume (SSV)
for audio. The audio volume changes as the driving speed changes.
Audio settings
Audio
Bass
Treble
Balance
Fade
Speed Sensitive Vol.
Adjusts the bass to the desired level.
Adjusts the treble to the desired level.
Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers.
Adjusts the fade to the desired level. Fade adjusts the sound level between the front and rear speakers.
Adjusts the speed sensitive volume function, which increases the volume of the audio system as the speed of the vehicle increases. Set to
“OFF” to disable the feature. The higher the setting, the more the volume increases in relation to vehicle speed.
Bass, treble, balance and fade can also be adjusted by pressing the AUDIO control knob and turning it to select the item to adjust. When the desired item
is shown on the display, turn the tuning to adjust and then press the AUDIO button until the display returns to the main audio screen. If the button is not
pressed for approximately 10 seconds, the radio or CD display will automatically reappear.
4-72 Monitor, climate, audio, phone and voice recognition systems
Clock operation
For additional information on setting the clock,
refer to “How to use the setting button” in this
section.
WHA0949
CD/MP3 display mode
While listening to a CD or an MP3/WMA CD,
certain text might be able to be displayed (when
CD encoded with text is being used).
Depending on how the CD or MP3/WMA CD is
encoded, the following text might be able to be
displayed by selecting the “Text” key:
● Folder displays the name of the current
folder being accessed.
WHA0950
● Album displays the ID3 encoded tag of the
album name.
● Artist displays the ID3 encoded tag of the
artist’s name.
● Disc displays the disc name of the CD currently playing.
● Track displays the name of the song on the
CD currently playing.
● File displays the name of the file currently
playing.
Some of this text or modes might not display
while playing a regular CD. Select the “Menu” key
with the NISSAN controller, then select the “Text”
key to display the text for the CD.
● Song displays the ID3 encoded tag of the
song name.
Press the BACK button to exit the CD text display
screen.
Monitor, climate, audio, phone and voice recognition systems 4-73
FM/AM/SAT radio operation
FM/AM band select
Pressing the FM·AM button will change the band
as follows:
AM → FM1 → FM2 → AM
When the FM·AM button is pressed while the
ignition switch is in the ACC or ON position, the
radio will come on at the station last played.
The last station played will also come on when
the VOL/ON·OFF control knob is pressed ON.
If a compact disc is playing when the FM·AM
button is pressed, the compact disc will automatically be turned off and the last radio station
played will come on.
The FM stereo indicator (STEREO) will illuminate
during FM stereo reception. When the stereo
broadcast signal is weak, the radio will automatically change from stereo to monaural reception.
XM band select
Pressing the AUX button will change the band as
follows:
USB → XM1* → XM2* → XM3* → AUX → USB
When the AUX button is pressed while the ignition switch is in the ACC or ON position, the
radio will come on at the station last played.
The last station played will also come on when
the VOL/ON·OFF control knob is pressed ON.
*When the AUX button is pressed, the satellite
radio mode will be skipped unless an optional
satellite receiver and antenna are installed and a
SiriusXM® Satellite Radio service subscription is
active. Satellite radio is not available in Alaska,
Hawaii and Guam.
If a compact disc is playing when the AUX button
is pressed, the compact disc will automatically be
turned off and the last radio station played will
come on.
TUNE/FOLDER (Tuning) knob
To manually tune the radio, turn
TUNE/FOLDER knob to the right or left.
the
SEEK/CAT and TRACK
tuning buttons
Press the SEEK/CAT
button or the
button to tune from high to low or
TRACK
low to high frequencies and stop at the next
broadcasting station.
SCAN tuning
Press the SCAN button to stop at each broadcasting station for 5 seconds. Pressing the
SCAN button again during this 5 second period
will stop scan tuning and the radio will remain
4-74 Monitor, climate, audio, phone and voice recognition systems
tuned to that station. If the SCAN button is not
pressed within 5 seconds, scan tuning moves to
the next station.
1 to 6 Station memory operations
Six stations can be set for the AM band. Twelve
stations can be set for the FM band (6 for FM1, 6
for FM2). Eighteen stations can be set for the XM
band (6 for XM1, 6 for XM2, 6 for XM3).
1. Choose the radio band AM, FM1 or FM2
using the FM·AM select button or choose
the satellite band SAT1 or SAT2 using the
AUX button.
2. Tune to the desired station using manual,
SEEK or SCAN tuning. Press and hold any
of the desired station memory buttons (1 –
6) until a beep sound is heard.
3. The channel indicator will then come on and
the sound will resume. Programming is now
complete.
4. Other buttons can be set in the same manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
Radio data system (RDS)
RDS stands for Radio Data System, and is a data
information service transmitted by some radio
stations on the FM band (not AM band). Currently, most RDS stations are in large cities, but
many stations are now considering broadcasting
RDS data.
RDS can display:
● Station call sign, such as “WHFR 98.3”.
● Station name, such as “The Groove”.
● Music or programming type such as “Classical”, “Country”, or “Rock”.
When the “Text” key is selected with the NISSAN
controller on the display while the radio is playing,
additional information is displayed on the screen.
If the station broadcasts RDS information, the
RDS icon is displayed.
Compact disc (CD) player operation
Place the ignition in the ACC or ON position and
insert the compact disc into the slot with the label
side facing up. The compact disc will be guided
automatically into the slot and start playing.
If the radio is already operating, it will automatically turn off and the compact disc will play.
If the system has been turned off while the compact disc was playing, pressing the
VOL/ON·OFF control knob will start the compact
disc.
DISC button
When the DISC button is pressed with the system off and a compact disc loaded, the system
will turn on and the compact disc will start to play.
When the DISC button is pressed with a compact disc loaded with the radio playing, the radio
will automatically be turned off and the compact
disc will start to play.
SEEK/CAT and TRACK
buttons
When the SEEK/CAT
button is pressed
while a compact disc is playing, the track being
played returns to its beginning. Press several
times to skip back through tracks. The compact
disc will go back the number of times the button
is pressed.
button is pressed while
When the TRACK
a compact disc is playing, the next track will start
to play from its beginning. Press several times to
skip through tracks. The compact disc will advance the number of times the button is pressed.
(When the last track on the compact disc is
skipped through, the first track will be played.)
The NISSAN controller can also be used to select tracks when a CD is playing.
SEEK/CAT and TRACK
(Rewind and Fast
Forward) buttons
(rewind)
Press and hold the SEEK/CAT
button or the TRACK
(fast forward) button
while a compact disc is playing; the compact disc
will play while rewinding or fast forwarding. When
the button is released, the compact disc will
return to normal play speed.
TUNE/FOLDER knob
While playing an MP3/WMA CD, turn the
TUNE/FOLDER knob right or left to scan forward
or backward through available folders.
RPT (repeat)/RDM (random) button
When the RPT/RDM button is pressed while the
compact disc is playing, the play pattern can be
changed as follows:
CD
Repeat All → 1 Track Repeat → 1 Disc Random
→ Repeat All
Monitor, climate, audio, phone and voice recognition systems 4-75
CD with compressed audio files
Before connecting a device to the auxiliary input
jacks, turn off the power of the portable device.
Repeat All → 1 Folder Repeat → 1 Track Repeat
→ 1 Disc Random → 1 Folder Random → Repeat All
With a compatible device connected to the auxiliary input jacks, press the AUX button until the
AUX mode appears in the display. The output
from the device will be played through the display
(when the vehicle is in the (P) Park position and
the parking brake engaged) and audio system.
Repeat All: Normal play mode. All tracks will
constantly play in sequential order.
1 Folder Repeat: The folder that is currently being
accessed will be repeated.
1 Track Repeat: The track that is currently playing
will be repeated.
1 Disc Random: The tracks on the disc that is
currently playing will be played in a mixed order.
1 Folder Random: The tracks in the folder that is
currently playing will be played in a mixed order.
CD EJECT button
When the
button is pressed with the compact disc loaded, the compact disc will be
ejected.
button is pressed while the
When the
compact disc is being played, the compact disc
will eject and the system will turn off.
LHA2474
AUX (auxiliary) input jacks
The auxiliary input jacks are located inside the
1 . NTSC compatible devices
center console 䊊
such as video games, camcorders and portable
video players can be connected to the auxiliary
input jacks. Audio devices, such as some MP3
players, can also be connected to the system
through the auxiliary input jacks.
The auxiliary input jacks are color coded for identification purposes:
● Red – right channel audio input
● White – left channel audio input
● Yellow – video input
4-76 Monitor, climate, audio, phone and voice recognition systems
Additional features
For additional information about the iPod® player
available with this system, refer to “iPod®* player
operation without Navigation System” in this section.
For additional information about the USB (Universal Serial Bus) connection port available with
this system, refer to “USB (Universal Serial Bus)
Connection Port (models without Navigation
System)” in this section.
LHA1367
AUX settings
Select the “Settings” key using the NISSAN controller and press the ENTER button.
Choose one of the display modes by selecting
” key or the “
” key:
the “
● Normal
● Wide
● Cinema
Monitor, climate, audio, phone and voice recognition systems 4-77
7.
SEEK/CAT button
8. SAT* button
9. RPT (repeat)/RDM (random) button
10. SCAN button
11. AM·FM button
*No satellite radio reception is available when the
SAT button is pressed to access satellite radio
stations unless optional satellite receiver and antenna are installed and a SiriusXM® Satellite
Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam.
For all operation precautions, refer to ⬙Audio operation precautions⬙ in this section.
Audio main operation
VOL/ON·OFF control
LHA2449
FM/AM/SAT RADIO WITH CD/DVD
PLAYER (if so equipped)
1.
CD eject button
2. PUSH ON·OFF button/VOL (volume) control knob
3. Station select (1 - 6) buttons
4. AUDIO
knob
button/TUNE/FOLDER
5. DISC·AUX button
6.
TRACK button
4-78 Monitor, climate, audio, phone and voice recognition systems
control
Place the ignition switch in the ACC or ON
position and push the VOL/ON·OFF control knob
while the system is off to call up the mode that
was playing immediately before the system was
turned off.
To turn the system off, press the VOL/ON·OFF
control knob.
Turn the VOL/ON·OFF control knob to adjust the
volume.
This vehicle has Speed Sensitive Volume (SSV)
for audio. The audio volume changes as the driving speed changes.
Audio settings
Audio
Bass
Treble
Balance
Fade
Speed Adjust Vol.
DivX Registration Code
Display Album Cover Art
Adjusts the bass to the desired level.
Adjusts the treble to the desired level.
Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers.
Adjusts the fade to the desired level. Fader adjusts the sound level between the front and rear speakers.
Adjusts the speed sensitive volume function, which increases the volume of the audio system as the speed of the vehicle increases.
Set to “OFF” to disable the feature. The higher the setting, the more the volume increases in relation to vehicle speed.
Displays the DivX registration code on the screen.
Toggles on or off the display of the CD jacket art when available if a CD is playing.
Bass, treble, balance and fade can also be adjusted by pressing the AUDIO control knob and turning it to select the item to adjust. When the desired item
is shown on the display, turn the tuning to adjust and then press the AUDIO button until the display returns to the main audio screen. If the button is not
pressed for approximately 10 seconds, the radio or CD display will automatically reappear.
Monitor, climate, audio, phone and voice recognition systems 4-79
● Song displays the ID3 encoded tag of the
song name.
broadcast signal is weak, the radio will automatically change from stereo to monaural reception.
● Album displays the ID3 encoded tag of the
album name.
SAT band select
● Artist displays the ID3 encoded tag of the
artist’s name.
Some of this text might not display while playing a
regular CD.
FM/AM/SAT radio operation
FM/AM band select
LHA1258
CD, DVD or USB with compressed audio
files
Pressing the AM·FM button will change the band
as follows:
AM → FM1 → FM2 → AM
While listening to a CD or compressed audio
files, certain text might be able to be displayed
(when CD encoded with text is being used).
When the AM·FM button is pressed while the
ignition switch is in the ACC or ON position, the
radio will come on at the station last played.
Depending on how the CD or compressed audio
files are encoded, the following text might be
displayed:
The last station played will also come on when
the VOL/ON·OFF control knob is pressed ON.
● Folder displays the name of the current
folder being accessed.
● File displays the name of the file currently
playing.
If a compact disc is playing when the AM·FM
button is pressed, the compact disc will automatically be turned off and the last radio station
played will come on.
The FM stereo indicator STEREO will illuminate
during FM stereo reception. When the stereo
4-80 Monitor, climate, audio, phone and voice recognition systems
Pressing the SAT button will change the band as
follows:
XM1* → XM2* → XM3* → XM1
When the SAT button is pressed while the ignition switch is in the ACC or ON position, the
radio will come on at the station last played.
The last station played will also come on when
the VOL/ON·OFF control knob is pressed ON.
*When the SAT button is pressed, the satellite
radio reception will not be available unless an
optional satellite receiver and antenna are installed and a SiriusXM® Satellite Radio service
subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam.
If a compact disc is playing when the SAT button
is pressed, the compact disc will automatically be
turned off and the last radio station played will
come on.
TUNE/FOLDER (Tuning) knob
To manually tune the radio, turn
TUNE/FOLDER knob to the right or left.
the
SEEK/CAT and TRACK
tuning buttons
For AM or FM:
Press the SEEK/CAT
button or the
button to tune from high to low or
TRACK
low to high frequencies and stop at the next
broadcasting station.
For XM:
button or the
Press the SEEK/CAT
button to go to the first channel of
TRACK
the previous or next category.
SCAN tuning
Press the SCAN button to stop at each broadcasting station for 5 seconds. Pressing the
SCAN button again during this 5 second period
will stop scan tuning and the radio will remain
tuned to that station. If the SCAN button is not
pressed within 5 seconds, scan tuning moves to
the next station.
1 to 6 Station memory operations
Six stations can be set for the AM band. Twelve
stations can be set for the FM band (six for FM1,
six for FM2). Eighteen channels can be set for the
SAT radio (six for XM1, six for XM2, six for XM3 –
if so equipped).
1. Choose the radio band AM, FM1 or FM2
using the FM·AM select button, or choose
the satellite band XM1, XM2 or XM3 using
the SAT button.
2. Tune to the desired station using manual,
SEEK or SCAN tuning. Press and hold any
of the desired station memory buttons (1 –
6) until the preset number is updated on the
display and the sound is briefly muted.
3. The channel indicator will then come on and
the sound will resume. Programming is now
complete.
4. Other buttons can be set in the same manner.
If the battery cable is disconnected, or if the fuse
opens, the radio memory will be canceled. In that
case, reset the desired stations.
List (AM and FM)
Select the “List” key using the NISSAN controller
or touch-screen to see a list of the presets in the
AM, FM1 or FM2 preset banks.
LHA1375
Menu (SiriusXM® Satellite Radio)
Select the “Menu” key using the NISSAN controller or touch-screen to see a list of options:
● Preset List — Displays the list of presets.
Press and hold the touch-screen or ENTER
button on the NISSAN controller to save a
preset.
● Customize Channel List — deselect channels to skip while using the TUNE/FOLDER
knob.
● Favorite Artist & Songs
– Tags the current artist or song playing on
SiriusXM® Satellite Radio as a favorite.
Monitor, climate, audio, phone and voice recognition systems 4-81
– Turn the Alert ON to indicate whenever a
favorite artist or song is playing on
SiriusXM® Satellite Radio. The audio
system must be playing SiriusXM® Satellite Radio for this feature to work.
– Delete a favorite artist or song.
● Categories — Displays a category list for
SiriusXM® Satellite Radio. Select a category to select the first channel for that
category.
● Direct Tune — Tune to a channel by entering
the channel number.
Radio data system (RDS)
RDS stands for Radio Data System, and is a data
information service transmitted by some radio
stations on the FM band (not AM band). Currently, most RDS stations are in large cities, but
many stations are now considering broadcasting
RDS data.
RDS can display:
● Station call sign, such as “WHFR 98.3”.
If the station broadcasts RDS information, the
text information is automatically displayed.
Compact disc (CD) player operation
Place the ignition in the ACC or ON position and
insert the compact disc into the slot with the label
side facing up. The compact disc will be guided
automatically into the slot and start playing.
If the radio is already operating, it will automatically turn off and the compact disc will play.
If the system has been turned off while the compact disc was playing, pressing the
VOL/ON·OFF control knob will start the compact
disc.
DISC·AUX button
When the DISC·AUX button is pressed with the
system off and the compact disc loaded, the
system will turn on and the compact disc will start
to play.
When the DISC·AUX button is pressed with the
compact disc loaded but the radio playing, the
radio will automatically be turned off and the
compact disc will start to play.
● Station name, such as “The Groove”.
● Music or programming type such as “Classical”, “Country”, or “Rock”.
● Station specific text.
4-82 Monitor, climate, audio, phone and voice recognition systems
SEEK/CAT and TRACK
buttons
When the SEEK/CAT
button is pressed
while a compact disc is playing, the track being
played returns to its beginning. Press several
times to skip back through tracks. The compact
disc will go back the number of times the button
is pressed.
button is pressed while
When the TRACK
the compact disc is playing, the next track will
start to play from its beginning. Press several
times to skip through tracks. The compact disc
will advance the number of times the button is
pressed. (When the last track on the compact
disc is skipped through, the first track will be
played.)
The NISSAN controller can also be used to select tracks when a CD is being played.
SEEK/CAT and TRACK
(Rewind and Fast
Forward) buttons
Press and hold the SEEK/CAT
(rewind)
(fast forward) button
button or the TRACK
while a compact disc is playing; the compact disc
will play while rewinding or fast forwarding. When
the button is released, the compact disc will
return to normal play speed.
TUNE/FOLDER knob
While playing a CD with compressed audio files,
turn the TUNE/FOLDER knob right or left to play
the next or previous folder.
Before connecting a device to the auxiliary input
jacks, turn off the power of the portable device.
With a compatible device connected to the auxiliary input jacks, press the DISC·AUX button
repeatedly until the AUX mode appears in the
display. The output from the device will be played
through the display (when the vehicle is in the (P)
Park position and the parking brake engaged)
and audio system.
CD EJECT button
When the
button is pressed with the compact disc loaded, the compact disc will be
ejected.
button is pressed while the
When the
compact disc is being played, the compact disc
will eject and the system will turn off.
LHA2474
AUX (auxiliary) input jacks
The auxiliary input jacks are located inside the
1 . NTSC compatible devices
center console 䊊
such as video games, camcorders and portable
video players can be connected to the auxiliary
input jacks. Audio devices, such as some MP3
players, can also be connected to the system
through the auxiliary input jacks.
The auxiliary input jacks are color coded for identification purposes:
● Red – right channel audio input
● White – left channel audio input
● Yellow – video input
Monitor, climate, audio, phone and voice recognition systems 4-83
Movies will not be shown on the front display
while the vehicle is in any drive position to reduce
driver distraction. Audio is available when a movie
is played. To view movies on the front display,
stop the vehicle in a safe location, move the shift
lever to the P (Park) position and apply the parking brake.
WARNING
WHA1393
AUX settings
Select the “Settings” key using the NISSAN controller.
The display mode can be set to Normal, Wide or
Cinema. The volume setting can be set to Low,
Medium or High.
Additional features
For additional information about the iPod® player
available with this system, refer to “iPod®* player
operation with Navigation System” in this section.
For additional information about the USB interface available with this system, refer to “USB
LHA1394
(Universal Serial Bus) Connection Port (models
with Navigation System)” in this section.
For additional information about the Bluetooth®
streaming audio feature available with this system, refer to “Bluetooth® streaming audio” in this
section.
DIGITAL VERSATILE DISC (DVD)
PLAYER OPERATION (models with
Navigation System)
Precautions
Start the engine when using the DVD entertainment system.
4-84 Monitor, climate, audio, phone and voice recognition systems
● The driver must not attempt to operate
the DVD system or wear the headphones while the vehicle is in motion so
that full attention may be given to vehicle operation.
● Do not attempt to modify the system to
display a movie on the front screen
while the vehicle is being driven. Doing
so may distract the driver and may
cause a collision and serious personal
injury or death.
CAUTION
● Only operate the DVD while the vehicle
engine is running. Operating the DVD
for extended periods of time with the
engine OFF can discharge the vehicle
battery.
● Do not allow the system to get wet.
Excessive moisture such as spilled liquids may cause the system to
malfunction.
● While playing VIDEO-CD media, this
DVD player does not guarantee complete functionality of all VIDEO-CD
formats.
Playing a DVD
DISC-AUX button
Park the vehicle in a safe location for the front
seat occupants to operate the DVD drive while
watching the images.
Press the DISC-AUX button until the DVD mode
is active on the display.
When a DVD is loaded, it will be replayed automatically.
The operation screen will be turned on when the
DISC-AUX button is pressed while a DVD is
playing. The operation screen will turn off automatically after a period of time. To turn it on again,
press the DISC-AUX button.
DVD operation keys
When the DVD is playing without the operation
screen being shown, you may use the touchscreen to select items from the displayed video.
You may also use the NISSAN controller to select
an item from the displayed video. When the operation screen is being shown, use the NISSAN
controller or the touch-screen to select an item
from the displayed menus.
PAUSE
key to pause the DVD. To reSelect the
sume playing the DVD, use the
key.
PLAY
key to start playing the DVD or
Select the
resume playing the DVD after it has been paused.
This function is only for DVD-VIDEO and DVDor
key to fast forward
VR. Select the
or rewind a set interval of time based on the CM
settings. For additional information, refer to “DVD
settings” in this section.
Top Menu
When the “Top Menu” key is selected while the
DVD is playing, the top menu specific to each
disc will be displayed. For additional information,
refer to the instructions attached to the disc.
DVD settings
Select the “Settings” key to adjust the following
settings:
STOP
Select the
CM SKIP
key to stop playing the DVD.
NEXT/PREVIOUS CHAPTER
key to skip the chapter(s) of the
Select the
disc forward. Select the
key to skip the
chapter(s) of the disc backward. The chapters
will advance forward or backward the number of
times the respective key is touched or selected
with the NISSAN controller.
● Key (DVD-VIDEO)
Displays the operation keys for the specific
DVD menu.
– Select the directional keys to move the
cursor on the DVD menu.
– Select the “Enter” key to fix the selected
menu item.
– Select the “Move” key to move the location of the operation keys on the screen.
– Select the “Back” key to return to the
previous menu screen.
Monitor, climate, audio, phone and voice recognition systems 4-85
– Select the “Hide” key to hide the operation keys.
● Title Menu (DVD-VIDEO)
Some menus specific to each disc will be
shown. For additional information, refer to
the instructions attached to the disc.
● Title Search (DVD-VIDEO, DVD-VR)
The scene with the specified title will be
displayed the number of times the “+” or “-”
side is selected.
● Group Search (VIDEO CD)
The scene with the specified group will be
displayed the number of times the “+” or “-”
side is selected.
● 10 Key Search (DVD-VIDEO, VIDEO CD,
CD-DA, DVD-VR)
Select the “10 Key Search” key to open the
number entry screen. Input the number you
want to search for and select the “OK” key.
The specified Title/Chapter or Group/Track
will be played.
● Select No. (VIDEO CD)
Select the “Select No.” key to open the
number entry screen. Input the number you
want to search for and select the “OK” key.
The specified scene will be played.
● Angle (DVD-VIDEO)
If the DVD contains different angles (such as
moving images), the current image angle
can be switched to another one. Select the
“Angle” key and use the “+” or “-” key to
change the angle.
● Angle Mark (DVD-VIDEO)
When this item is turned on, an angle mark
will be shown on the bottom of the screen if
the scene can be seen from a different angle.
● Menu Skip (DVD-VIDEO)
DVD menus are automatically configured
and the contents will be played directly
when the “Menu Skip” key is turned on. Note
that some discs may not be played directly
even if this item is turned on.
● CM Skip (DVD-VIDEO)
Select the “CM Skip” key to choose the
setting time for CM backward and forward
operations. Use the “+” or “-” key to choose
a setting time of 15, 30 or 60 seconds.
● DRC (DVD-VIDEO, DVD-VR)
DRC (Dynamic Range Compression) automatically adjusts the soundtrack volume
level to maintain a more even sound to the
speakers.
4-86 Monitor, climate, audio, phone and voice recognition systems
● DVD Language (DVD-VIDEO, VIDEO CD)
Select the “DVD Language” key to open the
number entry screen. Input the number corresponding to the preferred language and
select the “OK” key. The DVD top menu
language will be changed to the one specified.
● Display
Adjust the image quality of the screen by
selecting the preferred adjustment items.
● Audio
Choose the preferred language for the audio.
● Subtitle (DVD-VIDEO, DVD-VR)
Choose the preferred language for the subtitles.
● Display Mode (DVD-VIDEO, VIDEO CD,
DVD-VR)
Choose from the “Full”, “Wide”, “Normal” or
“Cinema” mode.
● Title List (DVD-VR)
Choose the preferred title from the list.
● Play Mode
Choose the preferred play mode.
● PG/PL Mode (DVD-VR)
Choose from the “PG” or “PL” mode.
CAUTION
● Do not force the USB device into the
USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the port. Make sure that the
USB device is connected correctly into
the USB port.
● Do not grab the USB port cover (if so
equipped) when pulling the USB device
out of the port. This could damage the
port and the cover.
LHA2475
USB (Universal Serial Bus)
CONNECTION PORT (models
without Navigation System) (if so
equipped)
Connecting a device to the USB
connection port
WARNING
Do not connect, disconnect, or operate the
USB device while driving. Doing so can be
a distraction. If distracted you could lose
control of your vehicle and cause an accident or serious injury.
● Do not leave the USB cable in a place
where it can be pulled unintentionally.
Pulling the cable may damage the port.
Refer to your device manufacturer’s owner information regarding the proper use and care of the
device.
The USB connection port is located in the center
1 .
console. Insert the USB device into the port䊊
When a compatible storage device is plugged
into the port, compatible audio files on the storage device can be played through the vehicle’s
audio system.
Audio file operation
AUX button
Place the ignition switch in the ON or ACC
position and press the AUX button to switch to
the USB input mode. If another audio source is
playing and a USB memory device is inserted,
press the AUX button repeatedly until the center
display changes to the USB memory mode.
If the system has been turned off while the USB
memory was playing, push the ON-OFF/VOL
control knob to restart the USB memory.
SEEK/CAT and TRACK
(Reverse or Fast Forward)
buttons
(rewind)
Press and hold the SEEK/CAT
button or TRACK
(fast forward) button for
1.5 seconds while an audio file on the USB
device is playing to reverse or fast forward the
track being played. The track plays at an increased speed while reversing or fast forwarding.
When the button is released, the audio file returns to normal play speed.
Monitor, climate, audio, phone and voice recognition systems 4-87
SEEK/CAT and TRACK
buttons
while an auPress the SEEK/CAT button
dio file on the USB device is playing to return to
the beginning of the current track. Press the
several times to skip
SEEK/CAT button
backward several tracks.
while an audio
Press the TRACK button
file on the USB device is playing to advance one
several
track. Press the TRACK button
times to skip forward several tracks. If the last
track in a folder on the USB device is skipped, the
first track of the next folder is played.
Folder selection
To change to another folder in the USB memory,
turn the TUNE/FOLDER knob or choose a folder
displayed on the screen.
RPT (repeat)/RDM (random) button
When the RPT (repeat)/RDM (random) button is
pressed while the USB memory is playing, the
play pattern can be changed as follows:
Repeat All → 1 Folder Repeat → 1 Track Repeat
→ All Random → 1 Folder Random → Repeat All
4-88 Monitor, climate, audio, phone and voice recognition systems
LHA2475
LHA1378
USB (Universal Serial Bus)
CONNECTION PORT (models with
Navigation System)
Connecting a device to the USB
connection port
WARNING
Do not connect, disconnect, or operate the
USB device while driving. Doing so can be
a distraction. If distracted you could lose
control of your vehicle and cause an accident or serious injury.
CAUTION
● Do not force the USB device into the
USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the port. Make sure that the
USB device is connected correctly into
the USB port.
● Do not grab the USB port cover (if so
equipped) when pulling the USB device
out of the port. This could damage the
port and the cover.
● Do not leave the USB cable in a place
where it can be pulled unintentionally.
Pulling the cable may damage the port.
Refer to your device manufacturer’s owner information regarding the proper use and care of the
device.
The USB connection port is located in the center
1 .
console. Insert the USB device into the port 䊊
When a compatible storage device is plugged
into the port, compatible audio files on the storage device can be played through the vehicle’s
audio system.
Audio file operation
DISC•AUX button
Place the ignition switch in the ON or ACC
position and press the DISC•AUX button to
switch to the USB input mode. If another audio
source is playing and a USB memory device is
inserted, press the DISC•AUX button repeatedly
until the center display changes to the USB
memory mode.
If the system has been turned off while the USB
memory was playing, push the ON-OFF/VOL
control knob to restart the USB memory.
SEEK/CAT and TRACK
(Reverse or Fast Forward)
buttons
Press and hold the SEEK/CAT
(rewind)
(fast forward) button for
button or TRACK
1.5 seconds while an audio file on the USB
device is playing to reverse or fast forward the
track being played. The track plays at an increased speed while reversing or fast forwarding.
When the button is released, the audio file returns to normal play speed.
SEEK/CAT and TRACK
buttons
while an auPress the SEEK/CAT button
dio file on the USB device is playing to return to
the beginning of the current track. Press the
several times to skip
SEEK/CAT button
backward several tracks.
while an audio
Press the TRACK button
file on the USB device is playing to advance one
several
track. Press the TRACK button
times to skip forward several tracks. If the last
track in a folder on the USB device is skipped, the
first track of the next folder is played.
Folder selection
To change to another folder in the USB memory,
turn the TUNE/FOLDER knob or choose a folder
displayed on the screen.
RPT (repeat)/RDM (random) button
When the RPT (repeat)/RDM (random) button is
pressed while the USB memory is playing, the
play pattern can be changed as follows:
Normal → 1 Folder Repeat → 1 Track Repeat →
All Random → 1 Folder Random → Normal
Monitor, climate, audio, phone and voice recognition systems 4-89
● Folder List/Track List
Displays the folder or track list. The “Movie
Playback” key is also displayed in this list
screen and enables you to switch to the
movie playback mode.
● Play Mode
Choose the preferred play mode using the
NISSAN controller or the touch-screen.
LHA2785
LHA1379
Menu
Movie file operation
There are some options available during playback. Select one of the following that are displayed on the screen, if necessary. Refer to the
following information for each item.
Park the vehicle in a safe location for the
front seat occupants to operate the USB
memory while watching the images.
● Movie Playback
Switch to the movie playback mode. This
item is displayed only when the USB
memory contains movie files.
The shift lever must be in Park (P) with the
parking brake engaged to watch movies
from a USB device.
When the DISC-AUX button is pushed with the
system off and the USB memory inserted, the
system will turn on. If another audio source is
playing and the USB memory is inserted, press
the DISC-AUX button repeatedly until the center
display changes to the USB memory mode.
4-90 Monitor, climate, audio, phone and voice recognition systems
DISC-AUX button
●
Operation keys
To operate the USB memory, select the desired
key displayed on the display screen.
●
Pause
key to pause the movie file.
Select the
To resume playing the movie file, use
key.
the
●
Play
key to start playing the
Select the
movie file or resume the movie file if it has
been paused.
●
●
key to skip the chapter(s)
Select the
of the disc backward. The chapters will go
back the number of times the key is selected.
Press and hold the key to rewind the chapter.
List
Select the “List” key on the movie file operation
screen to display the file list.
LHA1380
Settings
Select the “Settings” key to adjust the following
settings:
Stop
Select the
movie file.
Previous Chapter/Rewind
key to stop playing the
Next Chapter/Fast Forward
key to skip the chapter(s)
Select the
of the disc forward. The chapters will advance the number of times the key is selected. Press and hold the key to fast forward the chapter.
● Audio File Playback
Switch to the audio playback mode. This
item is displayed only when the USB
memory contains audio files.
● Play Mode
Choose between the “Normal” or “1 Track
Repeat” play modes.
Monitor, climate, audio, phone and voice recognition systems 4-91
● 10 Key Search
Select the “10 Key Search” key to open the
number entry screen. Input the number you
want to search for and the specified file or
folder will be played.
CAUTION
● Do not force the USB device into the
USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the port. Make sure that the
USB device is connected correctly into
the USB port.
● Display
Adjust the image quality of the screen.
● DRC
DRC (Dynamic Range Compression) automatically adjusts the soundtrack volume
level to maintain a more even sound to the
speakers.
● Do not grab the USB port cover (if so
equipped) when pulling the USB device
out of the port. This could damage the
port and the cover.
● Audio
Choose the preferred language of the audio.
LHA2475
● Subtitle
Choose the preferred language of the subtitles.
iPod®* PLAYER OPERATION
WITHOUT NAVIGATION SYSTEM (if
so equipped)
● Display Mode
Choose between the “Normal”, “Wide”,
“Cinema” or “Full” display modes.
Connecting iPod®
WARNING
Do not connect, disconnect or operate the
USB device while driving. Doing so can be
a distraction. If distracted you could lose
control of your vehicle and cause an accident or serious injury.
4-92 Monitor, climate, audio, phone and voice recognition systems
● Do not leave the USB cable in a place
where it can be pulled unintentionally.
Pulling the cable may damage the port.
Refer to your device manufacturer’s owner information regarding the proper use and care of the
device.
To connect an iPod® to the vehicle so that the
iPod® can be controlled with the audio system
controls and display screen, use the USB connection port located in the center console. Connect the iPod®-specific end of the cable to the
iPod® and the USB end of the cable to the USB
1 . If your iPod®
connection port on the vehicle 䊊
supports charging via a USB connection, its battery will be charged while connected to the vehicle with the ignition switch in the ACC or ON
position.
While connected to the vehicle, the iPod® can
only be operated by the vehicle audio controls.
AUX button
When the AUX button is pressed with the system
off and the iPod® connected, the system will turn
on. If another audio source is playing and the
iPod® is connected, press the AUX button repeatedly until the center display changes to the
iPod® mode.
To disconnect the iPod® from the vehicle, remove the USB end of the cable from the USB
connection port on the vehicle, then remove the
cable from the iPod®.
* iPod® is a trademark of Apple Inc., registered in
the U.S. and other countries.
Compatibility
The following models are compatible:
● iPod® 5th Generation - version 1.2.1
● iPod® Classic - version 1.1
LHA1395
● iPod® Touch - version 2.1.0
Audio main operation
● iPod® Nano - 1st generation version 1.3.1
Place the ignition switch in the ACC or ON
position. Press the AUX button repeatedly to
switch to the iPod® mode.
● iPod® Nano - 2nd generation version 1.1.3
● iPod® Nano - 3rd generation version 1.0.2
Make sure that your iPod® firmware is updated to
the version indicated above.
If the system has been turned off while the iPod®
was playing, pressing the VOL/ON·OFF control
knob will start the iPod®.
Monitor, climate, audio, phone and voice recognition systems 4-93
● Albums
● Artists
● Genres
● Composers
● Audiobooks
The following keys shown on the screen are also
available:
● MENU: returns to the previous screen.
●
: plays/pauses the music selected.
SEEK/CAT and TRACK buttons
LHA1396
Interface
The interface for iPod® operation shown on the
vehicle center display is similar to the iPod®
interface. Use the NISSAN controller and the
BACK button to play the iPod® with your favorite
settings.
The following items can be chosen from the menu
list screen. For additional information about each
item, refer to the iPod® Owner’s Manual.
When the
SEEK/CAT button or
TRACK button is pressed for less than 1.5 seconds while the iPod® is playing, the next track or
the beginning of the current track on the iPod®
will be played.
SEEK/CAT button or
When the
TRACK button is pressed for more than 1.5 seconds while the iPod® is playing, the iPod® will
play while fast forwarding or rewinding. When the
button is released, the iPod® will return to the
normal play speed.
● Playlists
● Podcasts
● Songs
4-94 Monitor, climate, audio, phone and voice recognition systems
LHA2475
iPod®* PLAYER OPERATION WITH
NAVIGATION SYSTEM (if so
equipped)
Connecting iPod®
WARNING
Do not connect, disconnect or operate the
USB device while driving. Doing so can be
a distraction. If distracted you could lose
control of your vehicle and cause an accident or serious injury.
CAUTION
● Do not force the USB device into the
USB port. Inserting the USB device
tilted or up-side-down into the port may
damage the port. Make sure that the
USB device is connected correctly into
the USB port.
● Do not grab the USB port cover (if so
equipped) when pulling the USB device
out of the port. This could damage the
port and the cover.
● Do not leave the USB cable in a place
where it can be pulled unintentionally.
Pulling the cable may damage the port.
Refer to your device manufacturer’s owner information regarding the proper use and care of the
device.
To connect an iPod® to the vehicle so that the
iPod® can be controlled with the audio system
controls and display screen, use the USB connection port located in the center console. Connect the iPod®-specific end of the cable to the
iPod® and the USB end of the cable to the USB
1 . If your iPod®
connection port on the vehicle 䊊
supports charging via a USB connection, its battery will be charged while connected to the vehicle with the ignition switch in the ACC or ON
position.
While connected to the vehicle, the iPod® can
only be operated by the vehicle audio controls.
● iPod® nano - 5th generation (firmware version 1.0.1 or later)
To disconnect the iPod® from the vehicle, remove the USB end of the cable from the USB
connection port on the vehicle, then remove the
cable from the iPod®.
* Some features of this iPod® may not be fully
functional.
Make sure that your iPod® firmware is updated to
the version indicated above.
* iPod® is a trademark of Apple Inc., registered in
the U.S. and other countries.
Compatibility
The following models are compatible:
● iPod® 5th Generation (firmware version
1.2.3 or later)
● iPod® Classic (firmware version 1.1.1 or
later)
● iPod® Touch (firmware version 2.0.0 or
later)*
● iPod® nano - 1st generation (firmware version 1.3.1 or later)
● iPod® nano - 2nd generation (firmware version 1.1.3 or later)
● iPod® nano - 3rd generation (firmware version 1.1.3 or later)
● iPod® nano - 4th generation (firmware version 1.0.4 or later)
Monitor, climate, audio, phone and voice recognition systems 4-95
DISC·AUX button
When the DISC·AUX button is pressed with the
system off and the iPod® connected, the system
will turn on. If another audio source is playing and
the iPod® is connected, press the DISC·AUX
button repeatedly until the center display
changes to the iPod® mode.
LHA1397
LHA1398
Audio main operation
Interface
Place the ignition switch in the ACC or ON
position. Press the DISC·AUX button repeatedly
to switch to the iPod® mode.
The interface for iPod® operation shown on the
vehicle center display is similar to the iPod®
interface. Use the NISSAN controller and the
BACK button to play the iPod® with your favorite
settings. The touch-screen can also be used to
control your favorite settings.
If the system has been turned off while the iPod®
was playing, pressing the VOL/ON·OFF control
knob will start the iPod®.
The following items can be chosen from the menu
list screen. For additional information about each
item, refer to the iPod® Owner’s Manual.
● Now Playing
● Playlists
● Artists
4-96 Monitor, climate, audio, phone and voice recognition systems
● Albums
SEEK/CAT button or
When the
TRACK button is pressed for more than 1.5 seconds while the iPod® is playing, the iPod® will
play while fast forwarding or rewinding. When the
button is released, the iPod® will return to the
normal play speed.
The NISSAN controller can also be used to select tracks when the iPod® is playing.
● Songs
● Podcasts
● Genres
● Composers
● Audiobooks
● Shuffle Songs
● Play Mode
The following keys shown on the screen are also
available:
● MENU: returns to the previous screen.
●
: plays/pauses the music selected.
LHA1315
Play mode
While the iPod® is playing, touch the “Menu” key
to display the iPod® menu. Touch the “Play
Mode” key to display the Play Mode screen and
adjust the settings for Shuffle, Repeat and Audiobooks. For additional information, refer to the
iPod® Owner’s Manual.
SEEK/CAT and TRACK buttons
SEEK/CAT button or
When the
TRACK button is pressed for less than 1.5 seconds while the iPod® is playing, the next track or
the beginning of the current track on the iPod®
will be played.
Monitor, climate, audio, phone and voice recognition systems 4-97
To exit the scrolling by letter mode, perform one of
the following:
● Press the ENTER button on the NISSAN
controller.
● Push the ENTER switch on the steering
wheel.
● Do not touch the controls for 2 seconds.
BLUETOOTH® STREAMING AUDIO
(if so equipped)
LHA1399
Scrolling menus
If you have a compatible Bluetooth® audio device that is capable of playing audio files, the
device can be connected to the vehicle’s audio
system so that the audio files on the device play
through the vehicle’s speakers.
While navigating long lists of artists, albums or
songs in the music menu, it is possible to scroll
the list by the first letter. To activate letter indexing, perform one of the following:
● Turn the NISSAN controller quickly.
● Press and hold the up/down directional arrows on the NISSAN controller.
● Touch and hold the page up/down arrows
on the touch-screen.
4-98 Monitor, climate, audio, phone and voice recognition systems
LHA1316
Connecting Bluetooth® audio
To connect your Bluetooth® audio device to the
vehicle, follow the procedure below:
1. Press the SETTING button on the control
panel.
2. Touch the “Bluetooth” key.
3. Touch the “Connect Bluetooth” key.
LHA1317
LHA1351
4. A screen will appear asking if you are connecting the device to use with the handsfree phone system. Select the “No” key.
5. Enter a PIN of your choice. It will be needed
by your Bluetooth® audio device to complete the connection process. For additional
information, refer to the Bluetooth® audio
device’s owner’s manual.
LHA1458
Audio main operation
To switch to the Bluetooth® audio mode, press
the DISC•AUX button repeatedly until the
Bluetooth® audio mode is displayed on the
screen.
The controls for the Bluetooth® audio are displayed on the screen.
Monitor, climate, audio, phone and voice recognition systems 4-99
LHA1316
Bluetooth® audio settings
LHA1296
4. Touch the “Audio Player” key.
To adjust the Bluetooth® audio settings, follow
the procedure below:
1. Press the SETTING button on the control
panel.
2. Touch the “Bluetooth” key.
3. Touch the “Connected Devices” key.
4-100 Monitor, climate, audio, phone and voice recognition systems
LHA1297
5. A list of the connected Bluetooth® audio
players is displayed. Select the name of the
device you wish to edit.
● A new disc may be rough on the inner and
outer edges. Remove the rough edges by
rubbing the inner and outer edges with the
side of a pen or pencil as illustrated.
LHA1298
6. The Device Name and Device Address are
displayed on the screen. Select the “Select”
key to make this device the active
Bluetooth® audio player. Select the “Edit”
key to edit the details of the player, such as
Device Name. Select the “Delete” key to
delete the device.
LHA0049
CD CARE AND CLEANING
● Handle a CD by its edges. Do not bend the
disc. Never touch the surface of the disc.
● Always place the discs in the storage case
when they are not being used.
● To clean a disc, wipe the surface from the
center to the outer edge using a clean, soft
cloth. Do not wipe the disc using a circular
motion.
● Do not use a conventional record cleaner or
alcohol intended for industrial use.
Monitor, climate, audio, phone and voice recognition systems 4-101
SOURCE select switch
Push the source select switch to change the
mode in the following sequence:
● Tilt up/down for less than 1.5 seconds to
increase or decrease the preset station.
Models without Navigation System
AM → FM1 → FM2 → XM1 → XM2 → XM3
(satellite radio, if so equipped) → USB/iPod®* (if
so equipped) → CD* → AUX* → AM.
● Tilt up/down for more than 1.5 seconds to
seek up or down to the next station.
Models with Navigation System
AM → FM1 → FM2 → XM1 → XM2 → XM3
(satellite radio, if so equipped) → CD/DVD* →
USB/iPod®* → Bluetooth® Audio* → AUX* →
AM.
LHA3170
1.
2.
3.
4.
(menu control) switch/ENTER
button
(back) switch
SOURCE switch
Volume control switch
STEERING WHEEL SWITCH FOR
AUDIO CONTROL
The audio system can be operated using the
controls on the steering wheel.
POWER on switch
With the ignition switch in the ACC or ON position, push the SOURCE switch to turn the audio
system on.
AM and FM
* These modes are only available when compatible media storage is inserted into the device.
Volume control switch
Push the volume control switch to increase or
decrease the volume.
Menu control
switch/ENTER button
While the display is showing a MAP, STATUS or
Audio screen, tilt the Menu Control switch upward or downward to select a station, track, CD
or folder. For most audio sources, tilting the
switch up/down for more than 1.5 seconds provides a different function than a tilting up/down
for less than 1.5 seconds.
4-102 Monitor, climate, audio, phone and voice recognition systems
● Press the ENTER button to show the list of
preset stations.
XM (if so equipped)
● Tilt up/down for less than 1.5 seconds to
increase or decrease the preset station.
● Tilt up/down for more than 1.5 seconds to
go to the next or previous category.
● Press the ENTER button to show the XM
Menu.
iPod® (if so equipped)
● Tilt up/down for less than 1.5 seconds to
increase or decrease the track number.
● Press the ENTER button to show the iPod
Menu.
CD
● Tilt up/down for less than 1.5 seconds to
increase or decrease the track number.
● Tilt up/down for more than 1.5 seconds to
increase or decrease the folder number (if
playing compressed audio files).
● Press the ENTER button to show the CD
Menu.
DVD (if so equipped)
● Tilt up/down for less than 1.5 seconds to
increase or decrease the track number.
AUX
Window antenna (if so equipped)
● Press the ENTER button to show the AUX
Menu.
BACK switch
CAUTION
Press the
switch to return to the previous
screen or cancel the current selection.
ANTENNA
● Tilt up/down for more than 1.5 seconds to
increase or decrease the title number.
The antenna cannot be shortened, but can be
removed. When you need to remove the antenna,
turn the antenna rod counterclockwise.
● Press the ENTER button to select an item
from the DVD display.
To install the antenna rod, turn the antenna rod
clockwise and hand tighten.
● When the transparent operation menu appears, the switch will control the menu.
USB (if so equipped)
● Tilt up/down for less than 1.5 seconds to
increase or decrease the track number.
● Tilt up/down for more than 1.5 seconds to
increase or decrease the folder number.
● Press the ENTER button to show the USB
Menu.
The antenna pattern is printed inside the rear
window.
● Do not place metalized film near the
rear window glass or attach any metal
parts to it. This may cause poor reception or noise.
● When cleaning the inside of the rear
window, be careful not to scratch or
damage the rear window antenna.
Lightly wipe along the antenna with a
dampened soft cloth.
CAUTION
● Always properly tighten the antenna
rod during installation or the antenna
rod may break during vehicle operation.
● Be sure that the antenna is removed
before the vehicle enters an automatic
car wash.
● Be sure to fold down the antenna before the vehicle enters a garage with a
low ceiling.
Bluetooth® Audio (if so equipped)
● Tilt up/down for less than 1.5 seconds to
increase or decrease the track number.
Monitor, climate, audio, phone and voice recognition systems 4-103
DUAL HEAD RESTRAINT/HEADREST
DVD SYSTEM (if so equipped)
If your vehicle is equipped with the Dual Head
Restraint/Headrest DVD System, you can enjoy
playing video files via a DVD, CD or USB memory
that provides images and sound both from the
front and rear display screens.
You can also enjoy compatible auxiliary devices
such as video games, camcorders or portable
video players through the auxiliary jacks.
The front and right/left rear displays can show
different sources individually. The maximum of
three audio sources, such as an iPod®, DVD and
auxiliary device, can be enjoyed at the same time.
WARNING
The driver must not attempt to operate the
Dual Head Restraint/Headrest DVD System while driving so full attention may be
given to vehicle operation.
Park the vehicle in a safe location and
apply the parking brake to view the images on the front center display screen
using the DVD player.
CAUTION
● Do not attempt to use the system in
extremely high or low temperature condition [below ⫺4ºF (⫺20ºC) or above
158ºF (70ºC)].
● To avoid draining the vehicle battery, do
not operate the system for more than
15 minutes without starting the engine.
The front display is designed not to show
the images while driving, as the driver’s
attention must be given to vehicle operation for safety. Sounds are available. To
show the images in the front display, stop
the vehicle in a safe location, move the shift
lever to the P (Park) position and apply the
parking brake.
SYSTEM COMPONENTS
Rear displays
SAA3329
CAUTION
The rear displays are located on the back of the
front head restraints (headrests).
● The glass screen on the liquid crystal
display may break if hit with a hard or
sharp object. If the glass breaks, do not
touch the liquid crystalline material. In
case of contact with skin, wash immediately with soap and water.
Use the remote control to operate the rear display
screen.
● Use soft, damp cloth when cleaning the
Dual Head Restraint/Headrest DVD
System components. Do not use solvents or cleaning solutions.
The rear screens can also be activated using the
NISSAN controller. For additional information,
refer to “Rear display settings” in this section.
4-104 Monitor, climate, audio, phone and voice recognition systems
Press the preferred side (L or R) of the power
ON/OFF button on the remote control to activate
the rear display.
Do not block the range of the wireless remote
control receiver and wireless headphones trans1 .
mitter 䊊
Before connecting a device to a jack, turn off the
power of the portable device.
To display the rear AUX screen, press the preferred side (L or R) of the AUX (L)/AUX (R)
buttons (rear input jacks) on the remote control.
The device connected to the rear auxiliary input
jacks cannot be displayed on the front screen.
LHA2210
The angle of the rear display screen can be
adjusted for optimal viewing.
Gently apply pressure to the base of the screen
where indicated until the screen reached the
desired position. When the screen is released, it
will remain in the current position. To return to the
screen to the flat position, press the base of the
screen in all the way until it clicks and retracts.
LHA2260
Rear auxiliary input jacks
The rear auxiliary input jacks are located on the
inside of the center console. NTSC/PAL compatible devices can be connected to the auxiliary
jacks. The images from the connected device can
be viewed on the rear displays.
The rear auxiliary jacks are color coded for identification purposes.
● Yellow - video input
● White - left channel audio input
● Red - right channel audio input
Monitor, climate, audio, phone and voice recognition systems 4-105
It is also possible that the headphones may be
too far from the transmitter which is in the rear
display screen. This is not a malfunction.
The sound may also be interrupted temporarily
when there is an obstacle between the headphones and the transmitter. Remove the obstacle, such as opaque materials, hands, hair,
etc.
SAA3077
SAA3078
Headphones
Volume control
The headphones for this system are a wireless
type and no cables are necessary. The headphones can only be used in the rear seat.
Turn the volume control knob to adjust the volume.
Power ON/OFF
Press the power ON/OFF button to turn the
headphones on or off.
The headphones will automatically turn off after
about 4 minutes if there is no sound during that
period. The headphones will also turn off after
approximately 4 hours of continuous use. To prevent the battery from being discharged, keep the
power turned off when not in use.
If the sound from the headphones is not clear, it
may be due to interference from an infrared communication device or a cellular phone. If this
happens, turn down the headphone volume or
stop using the headphones.
4-106 Monitor, climate, audio, phone and voice recognition systems
LHA2211
Type A (if so equipped)
Channel change
When the rear displays are playing different
sources, slide the channel select switch to select
the sound.
LHA8801
Type B (if so equipped)
“Left” is the sound on the left display. “Right” is
the sound on the right display.
LHA3169
Remote control
The remote control has the following functions:
1. POWER
button
2. Display select switch (L or R)
Monitor, climate, audio, phone and voice recognition systems 4-107
3. MENU button
4. Directional buttons
5. Backlight button
6. SETUP button
7.
(next chapter) button
8.
(fast forward) button
9.
(stop) button
10. Volume control button
11.
12.
13.
(reverse) button
(play and pause) button
(previous chapter) button
SAA0978
Remote control and headphones
battery replacement
14. BACK button
15. ENTER button
16. SOURCE button
Select rear displays audio source
Slide the display select switch on the remote
control to the left (L) or right (R) to select each
screen source individually.
CAUTION
● An improperly disposed battery can
harm the environment. Always confirm
local regulations for battery disposal.
● When changing batteries, do not let
dust or oil get on the components.
The SOURCE button on the remote control selects the source for front and rear screens at
once.
4-108 Monitor, climate, audio, phone and voice recognition systems
SAA3081
To replace the battery:
1. Open the lid as illustrated.
1
● For headphones, remove the screw 䊊
with a flat-bladed screwdriver before removing the lid.
2. Replace both batteries with new ones.
● Recommended battery:
Size AA 6 2 (DVD remote control)
Size AAA 6 2 (headphones)
● Be careful not to touch the battery terminal.
● Make sure that the (+) and (-) ends on the
batteries match the markings inside the
compartment.
3. Close the lid securely.
● If you will not be using the remote control
for long periods of time, remove the batteries.
● Replacement of the batteries is needed
when the remote control only functions at
extremely close distances to the Dual
Head Restraint/Headrest DVD System or
when it does not function at all.
FCC Notice:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies
with Part 15 of the FCC Rules and RSS-210
of Industry Canada. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
● Do not allow the system to get wet.
Excessive moisture such as spilled liquids may cause the system to
malfunction.
BEFORE OPERATING DUAL HEAD
RESTRAINT/HEADREST DVD
SYSTEM
● While playing VIDEO-CD media, this
DVD player does not guarantee complete functionality of all VIDEO-CD
formats.
Precautions
Parental level (parental control)
Start the engine when using the Dual Head
Restraint/Headrest DVD System.
WARNING
The driver must not attempt to operate the
Dual Head Restraint/Headrest DVD System or wear the headphones while the
vehicle is in motion so that full attention
may be given to vehicle operation.
Video data with the parental control setting can
be played with this system. Please use your own
judgement to set the parental control with the
system.
Disc selection
You can play the following disc formats with the
DVD player:
● DVD-VIDEO
CAUTION
● Only
operate
the
Dual
Head
Restraint/Headrest DVD System while
the vehicle engine is running. Operating
the Dual Head Restraint/Headrest DVD
System for extended periods of time
with the engine OFF can discharge the
vehicle battery.
● VIDEO-CD
● DTS-CD
Use DVDs with the region code “ALL” or the code
applicable to your country. The region code is
displayed as a small symbol printed on the top of
the DVD. This vehicle-installed DVD player can
only play DVDs with an applicable region code.
Monitor, climate, audio, phone and voice recognition systems 4-109
Available audio sources
The following sources are available to play on
each display:
Front display
● Radio
● CD/DVD
● USB memory/iPod®
● Bluetooth® audio
● AUX (front)
Rear display
● DVD
● USB memory with video files
● AUX (front/rear)
SAA3069
Front display
PLAYING A DVD (Digital Versatile
Disc)
DISC·AUX button
Park the vehicle in a safe location for the
front seat occupants to operate the DVD
player while watching the images.
Insert a DVD into the CD/DVD slot with the
labeled side up. The DVD will be guided automatically into the slot. When ejecting the DVD,
press the EJECT button.
4-110 Monitor, climate, audio, phone and voice recognition systems
SAA3082
Rear display
Press the AUX·DVD button on the control panel
and turn the display to the DVD mode, and begin
playing the DVD automatically.
When a DVD is loaded, it will begin playing
automatically.
The front screen will be turned on when the
AUX·DVD button is pressed while a DVD is being
played, and it will turn off automatically after a
period of time. To turn it on again, press the
AUX·DVD button again.
Adjust front/rear displays
Front display
To adjust the front display mode, press the DISP
button on the center multi-function control panel.
Follow the instructions displayed on the screen.
To start playing the DVD, it is also possible to
press the play button on the keypad of the remote
control.
STOP
Rear display
Select this key and press the ENTER button to
stop playing the DVD.
To adjust the rear display mode, press the preferred side (L or R) of the DISP button on the
remote control.
To stop playing the DVD, it is also possible to
press the stop button on the keypad of the remote control.
DVD operation keys
To operate the DVD player, select the preferred
key displayed on the operation screen using the
NISSAN controller.
PAUSE
Select this key and press the ENTER button to
pause the DVD. To resume playing the DVD, use
the “PLAY” key.
To pause the DVD, it is also possible to push the
pause button on the keypad of the remote control.
PLAY
Select this key and press the ENTER button to
start playing the DVD, for example, after pausing
the DVD.
Commercial Skip
This function is only for DVD-VIDEO and DVDVR.
Select this key to skip forward or backwards by
the set amount as defined in the DVD settings
menu.
To skip forward or backward, it is also possible to
press the corresponding button on the keypad of
the remote control.
SKIP (FORWARD)
Select this key and press the ENTER button to
skip the chapter(s) of the disc forward. The chapters will advance the number of times the ENTER
button is pressed.
To skip the chapter(s) forward, it is also possible
to press the corresponding button on the keypad
of the remote control.
SKIP (REWIND)
Select this key and press the ENTER button to
skip the chapter(s) of the disc backward. The
chapters will go back the number of times the
ENTER button is pressed.
To skip the chapter(s) backward, it is also possible to press the corresponding button on the
keypad of the remote control.
Monitor, climate, audio, phone and voice recognition systems 4-111
Arrow icons: Move the cursor to select a DVD
menu.
Enter: Enter the selected menu.
Move: Change the display location by moving the
operation key.
Back: Return to the previous screen.
Hide: Hide the operation key.
Title Menu (front)/Menu (rear) (DVDVIDEO)
SAA2498
SAA3082
Front screen
Rear screen
Setting keys
Select the “Settings” key with the NISSAN controller and press the ENTER button to adjust the
following settings.
The items indicated with “*” can also be set from
the rear display. Press the DVD button on the
remote control while a DVD is being played.
Select the preferred item using the directional
buttons on the remote control and press the
ENTER button.
Key (DVD-VIDEO)
Keys for the DVD menu operation are displayed.
4-112 Monitor, climate, audio, phone and voice recognition systems
Menus specific to each disc will be shown. For
additional information, refer to the instructions
attached to the disc.
Title Search (DVD-VIDEO)
A scene that belongs to a specified title will be
displayed each time the “+” side or “⫺” side is
selected.
10 Key Search (DVD-VIDEO, VIDEO-CD,
CDDA)
Select the “10 Key Search” key and press the
ENTER button to open the number entry screen.
Input the number you want to search for and
select the “OK” key with the NISSAN controller.
Then press the ENTER button. The specified
Title/Chapter or Group/Track will be played.
Angle (DVD-VIDEO)
DVD Language (DVD-VIDEO, VIDEO-CD)
Play Mode
If the DVD contains different angles (such as
moving images), the current image angle can be
switched to another one.
Select the “DVD Language” key and press the
ENTER button to open the number entry screen.
Choose the preferred play mode using the
NISSAN controller and press the ENTER button.
Input the number corresponding to the preferred
language and select the “OK” key with the
NISSAN controller. Then press the ENTER button. The DVD top menu language will be changed
to the one selected.
Remote control operation
Display
The rear displays can be activated or deactivated
individually.
Select the “Angle” key and press the ENTER
button. When the “+” side or “⫺” side is selected,
the angle will change.
Angle Mark (DVD-VIDEO)
When this item is turned on, an angle mark will be
shown on the bottom of the screen if the scene
can be seen from a different angle.
Menu Skip (DVD-VIDEO)
DVD menus are automatically configured and the
contents will be played directly when the “Menu
Skip” key is turned on. Note that some discs may
not be played directly even if this item is turned
on.
CM Skip (DVD-VIDEO)
The amount of seconds for CM Skip can be set to
15, 30 or 60 seconds.
DRC (DVD-VIDEO)
DRC (Dynamic Range Compression) allows tuning of the dynamic range of sound recorded in the
Dolby Digital format.
Adjust the image quality of the screen, select the
preferred adjustment items and press the ENTER
button.
Audio
Choose the preferred language using the
NISSAN controller and press the ENTER button.
Subtitle (DVD-VIDEO)
Choose the preferred language using the
NISSAN controller and press the ENTER button.
To turn off the subtitles, press and hold the ENTER button until a beep sounds.
Display Mode (DVD-VIDEO, VIDEO-CD)
Choose from the “Full”, “Wide”, “Normal” or “Cinema” mode using the NISSAN controller and
press the ENTER button.
Use the remote control to adjust the following
items.
Rear display ON/OFF
To activate or deactivate the rear displays, press
the preferred side (L or R) of the ON·OFF button
on the remote control.
Joystick
Use the joystick to select the items displayed on
the rear screen.
ENTER button
Press the ENTER button to make the selected
item complete on the rear screen.
BACK button
Press to go back to the previous screen or cancel
the selection.
DVD mode
Press the DVD button to select the DVD mode.
Monitor, climate, audio, phone and voice recognition systems 4-113
AUX mode
Rear display settings
Color System
The AUX (auxiliary input jacks) modes can be
activated or deactivated individually. To activate
the AUX mode, press the preferred side (L or R)
of the AUX button. Press the AUX button again to
deactivate the AUX mode and display another
mode.
To adjust the rear display settings, select the
preferred key and press the ENTER button. The
following settings are available:
To choose the color system, select from “NTSC”,
“PAL”, “PAL-60”, “PAL-M”, “PAL-N” or “AUTO”
using the joystick on the remote control and tilt
the joystick to the right or left.
Volume
To control the volume level, push the VOL
button
or
.
Display
Display settings can be set individually for the
right and left screens.
Press the preferred side (L or R) of the DISP
button to adjust the rear display settings.
Sound
To change the language, press the SOUND button. Each time the button is pressed, the language will change to each language stored in the
DVD.
Track/Channel
Press to skip to the previous or next DVD scene
selection.
Aspect
Select the display size from “CINEMA”, “WIDE”,
“FULL” or “NORMAL” using the joystick on the
remote control.
Picture Mode
To adjust the display brightness automatically,
select the “Brightness” key and then select from
“Darker”, “Normal” or “Brighter”. When adjusting
manually, select “OFF” and adjust using the joystick on the remote control and tilt the joystick to
the right or left.
To adjust tint, color, contrast or black level, select
a key using the joystick on the remote control and
tilt the joystick to the right or left.
Press the BACK button on the remote control to
apply the settings and return to the previous
display.
To return the adjustment levels to the default
value, select “Execute” next to “Initialization” using the joystick on the remote control and press
the ENTER button. The “Execute” key is deactivated when the picture mode settings are already
in the default value.
4-114 Monitor, climate, audio, phone and voice recognition systems
3D Y/C filter
Set to ON/OFF using the joystick on the remote
control. When turned on, small characters and an
outline of the shapes will be displayed more
clearly than when turned off.
AUX Volume Setting
To set the AUX volume, select from “High”, “Low”
or “Middle” using the joystick on the remote control and tilt the joystick to the right or left.
Rear speaker volume
From the rear display settings screen, the volume
on the rear speaker can be toggled ON and OFF.
OPERATING TIPS
● The images from a device that is connected
to the rear auxiliary input jacks cannot be
viewed on the front displays.
● It is not possible to switch the source to USB
(if so equipped) or DVD using the remote
control when the rear display is in the AUX
mode. Press the AUX (L)/ AUX (R) button in
the remote control and turn off the AUX
mode, and then push the preferred mode
switch.
● It is not possible to display different video
files, such as DVD or video files in the USB
memory, on the front and rear displays at the
same time.
● It is not possible to play an audio file and a
video file in the same USB memory at the
same time.
Multiple source display
It is possible to play different sources on each
display. The following example shows how to
operate multiple sources.
1. Display a video file in the front display by
selecting the DVD mode.
2. Press the L side on the power ON·OFF
button on the remote control. The left rear
display comes on and the DVD screen will
be displayed.
3. Press the R side on the power ON·OFF
button on the remote control. The right rear
display comes on and the DVD screen will
be displayed.
4. Switch the source on the front display to an
audio source. The sound from the speakers
switches according to the front display. The
rear display continues to display the DVD.
5. Turn on a pair of headphones and listen to
the DVD on the rear displays using the headphones.
6. Connect an auxiliary device into the AUX
jacks and press the AUX (L)/AUX (R) button
on the remote control. The selected side of
the rear display turns to the AUX mode. The
other rear display continues to display the
DVD.
CAUTION
● Do not use any solvents or cleaning
solutions when cleaning the video
system.
● Do not use excessive force on the monitor screen.
● Avoid touching or scratching the monitor screen as it may become dirty or
damaged.
● Do not attempt to operate the system in
extreme temperature conditions [below
⫺4°F (⫺20°C) and above 158°F (70°C)]
● Do not attempt to operate the system in
extreme humidity conditions (less than
10% or more than 75%).
7. Turn on the other pair of headphones. If the
sound from the headphones is not from the
AUX jacks, switch the channel with the
channel select switch on the headphones.
CARE AND MAINTENANCE
Use a lightly dampened, lint free cloth to clean the
surfaces of your Dual Head Restraint/Headrest
DVD System (DVD player face, screen, remote
control, etc.).
Monitor, climate, audio, phone and voice recognition systems 4-115
CAR PHONE OR CB RADIO
When installing a CB, ham radio or car phone in
your vehicle, be sure to observe the following
precautions; otherwise, the new equipment may
adversely affect the engine control system and
other electronic parts.
WARNING
● A cellular phone should not be used for
any purpose while driving so full attention may be given to vehicle operation.
Some jurisdictions prohibit the use of
cellular phones while driving.
● If you must make a call while your vehicle is in motion, the hands free cellular phone operational mode is highly
recommended. Exercise extreme caution at all times so full attention may be
given to vehicle operation.
BLUETOOTH® HANDS-FREE PHONE
SYSTEM WITHOUT NAVIGATION
SYSTEM (if so equipped)
CAUTION
● Keep the antenna as far away as possible from the electronic control
modules.
● Keep the antenna wire more than 8 in
(20 cm) away from the electronic control
system harnesses. Do not route the antenna wire next to any harness.
● Adjust the antenna standing-wave ratio
as recommended by the manufacturer.
● Connect the ground wire from the CB
radio chassis to the body.
● For details, consult a NISSAN dealer.
● If you are unable to devote full attention
to vehicle operation while talking on
the phone, pull off the road to a safe
location and stop your vehicle.
4-116 Monitor, climate, audio, phone and voice recognition systems
WARNING
● Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
● If you are unable to devote full attention
to vehicle operation while talking on
the phone, pull off the road to a safe
location and stop your vehicle.
CAUTION
To avoid discharging the vehicle battery,
use a phone after starting the engine.
phone module when the ignition switch is placed
in the ON position with the previously connected
cellular phone turned on and carried in the vehicle.
You can connect up to 5 different Bluetooth®
cellular phones to the in-vehicle phone module.
However, you can talk on only one cellular phone
at a time.
Before using the Bluetooth® Hands-Free Phone
System, refer to the following notes.
● Set up the wireless connection between a
compatible cellular phone and the in-vehicle
phone module before using the hands-free
phone system.
● Some Bluetooth® enabled cellular phones
may not be recognized by the in-vehicle
phone
module.
Please
visit
www.nissanusa.com/bluetooth for a recommended phone list and connecting instructions.
LHA3157
Your NISSAN is equipped with the Bluetooth®
Hands-Free Phone System. If you have a compatible Bluetooth® enabled cellular phone, you
can set up the wireless connection between your
cellular phone and the in-vehicle phone module.
With Bluetooth® wireless technology, you can
make or receive a hands-free telephone call with
your cellular phone in the vehicle.
● You will not be able to use a hands-free
phone under the following conditions:
– Your vehicle is outside of the cellular service area.
Once your cellular phone is connected to the
in-vehicle phone module, no other phone connecting procedure is required. Your phone is
automatically connected with the in-vehicle
Monitor, climate, audio, phone and voice recognition systems 4-117
– Your vehicle is in an area where it is
difficult to receive a cellular signal; such
as in a tunnel, in an underground parking
garage, near a tall building or in a mountainous area.
● Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers. Storing the device in a different location may
reduce or eliminate the noise.
– Your cellular phone is locked to prevent it
from being dialed.
● Refer to the cellular phone Owner’s Manual
regarding the telephone charges, cellular
phone antenna and body, etc.
● When the radio wave condition is not ideal
or ambient sound is too loud, it may be
difficult to hear the other person’s voice during a call.
REGULATORY INFORMATION
● Do not place the cellular phone in an area
surrounded by metal or far away from the
in-vehicle phone module to prevent tone
quality degradation and wireless connection
disruption.
– CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regulations.
● While a cellular phone is connected through
the Bluetooth® wireless connection, the
battery power of the cellular phone may discharge quicker than usual. The Bluetooth®
Hands-Free Phone System cannot charge
cellular phones.
● If the hands-free phone system seems to be
malfunctioning, refer to “Troubleshooting
guide” in this section. You can also visit
www.nissanusa.com/bluetooth for troubleshooting help.
interference, including interference that may
cause undesired operation of the device.
– This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
BLUETOOTH® is a
trademark owned by
Bluetooth SIG, Inc.
and licensed to
Visteon.
FCC Regulatory information
– Operation is subject to the following two conditions:
1. This device may not cause interference and
2. this device must accept any interference,
including interference that may cause undesired operation of the device.
IC Regulatory information
– Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
4-118 Monitor, climate, audio, phone and voice recognition systems
USING THE SYSTEM
The NISSAN Voice Recognition system allows
hands-free operation of the Bluetooth® HandsFree Phone System.
If the vehicle is in motion, some commands may
not be available so full attention may be given to
vehicle operation.
Initialization
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
button is
which takes a few seconds. If the
pressed before the initialization completes, the
system will announce “Hands-free phone system
not ready” and will not react to voice commands.
Operating tips
To get the best performance out of the NISSAN
Voice Recognition system, observe the following:
● Keep the interior of the vehicle as quiet as
possible. Close the windows to eliminate
surrounding noises (traffic noises, vibration
sounds, etc.), which may prevent the system
from recognizing voice commands correctly.
● Wait until the tone sounds before speaking a
command. Otherwise, the command will not
be received properly.
● Start speaking a command within 5 seconds
after the tone sounds.
● Speak in a natural voice without pausing
between words.
Giving voice commands
To operate NISSAN Voice Recognition, press
and release the
button located on the
steering wheel. After the tone sounds, speak a
command.
The command given is picked up by the microphone, and voice feedback is given when the
command is accepted.
● If you need to hear the available commands
for the current menu again, say “Help” and
the system will repeat them.
● If a command is not recognized, the system
announces, “Command not recognized.
Please try again.” Make sure the command is
said exactly as prompted by the system and
repeat the command in a clear voice.
● To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example,
button and after the tone
press the
say, “Call Redial.”
● If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a
response.
How to say numbers
NISSAN Voice Recognition requires a certain
way to speak numbers in voice commands. Refer
to the following rules and examples.
● You can cancel a command when the system is waiting for a response by saying,
“Cancel” or “Quit.” The system announces
“Cancel” and ends the VR session. You can
button on the
also press and hold the
steering wheel for 5 seconds at any time to
end the VR session. Whenever the VR session is cancelled, a double beep is played to
indicate you have exited the system.
● If you want to adjust the volume of the voice
feedback, press the volume control switches
(+ or -) on the steering wheel while being
provided with feedback. You can also use
the radio volume control knob.
● In most cases you can interrupt the voice
feedback to speak the next command by
button on the steering
pressing the
wheel.
● Either “zero” or “oh” can be used for “0”.
Example: 1-800-662-6200
– “One eight oh oh six six two six two oh
oh”, or
– “One eight zero zero six six two six two oh
oh”
● Words can be used for the first 4 digits
places only.
Example: 1-800-662-6200
– “One eight hundred six six two six two oh
oh”,
– NOT “One eight hundred six six two sixty
two hundred,” and
– NOT “One eight oh oh six six two sixty two
hundred”
Monitor, climate, audio, phone and voice recognition systems 4-119
● Numbers can be spoken in small groups.
The system will prompt you to continue entering digits, if desired.
Example: 1-800-662-6200
– “One eight zero zero”
The system repeats the numbers and
prompts you to enter more.
– “Six six two”
The system repeats the numbers and
prompts you to enter more.
– “Six two zero zero”
● Say “pound” for “#”. Say “star” for “*” (available when using the “Special Number” command and the “Send” command during a
call).
For additional information, refer to “List of
voice commands” and “Special number” in
this section.
NOTE:
For best results, say phone numbers as
single digits.
The voice command “Help” is available at any
time. Please use the “Help” command to get
information on how to use the system.
Voice Prompt Interrupt
In most cases you can interrupt the voice feedback to speak the next command by pressing
button on the steering wheel. After
the
interrupting the system, wait for a beep before
speaking your command.
One Shot Call
To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example, press
button and after the tone say, “Call
the
Redial”.
LHA2566
CONTROL BUTTONS
The control buttons for the Bluetooth® Hands-Free
Phone System are located on the steering wheel.
PHONE/SEND
Press the
button to initiate a VR
session or answer an incoming call.
Example: 1-555-1212 *123
– “One five five five one two one two star
one two three”
● Say “plus” for “+” (available only when using
the “Special Number” command).
● Say “pause” for a 2-second pause (available
only when storing a phonebook number).
4-120 Monitor, climate, audio, phone and voice recognition systems
You can also use the
button to
interrupt the system feedback and give
a command at once. For additional
information, refer to “List of voice commands” and “During a call” in this
section.
PHONE/END
While the voice recognition system is
active, press and hold the
button
for 5 seconds to quit the voice recognition system at any time.
TUNING SWITCH
While using the voice recognition
system, tilt the tuning switch up or
down to manually control the phone
system.
GETTING STARTED
The following procedures will help you get
started using the Bluetooth® Hands-Free Phone
System with NISSAN Voice Recognition. For additional information, refer to “List of voice commands” in this section.
Choosing a language
You can interact with the Bluetooth® HandsFree Phone System using English, Spanish or
French.
To change the language, perform the following.
1. Press the SETTING button on the control
panel.
3. Select desired language and press ENTER
on the control panel.
Connecting procedure
NOTE:
The connecting procedure must be performed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
Main Menu
A
“Connect phone” 䊊
B
“Add phone” 䊊
C
Initiate from handset 䊊
D
Name phone 䊊
1. Press the
button on the steering
wheel. The system announces the available
commands.
A . The system ac2. Say: “Connect phone” 䊊
knowledges the command and announces
the next set of available commands.
The connecting procedure of the cellular
phone varies according to each cellular
phone model. For additional information, refer to the cellular phone Owner’s Manual for
details.
You
can
also
visit
www.nissanusa.com/bluetooth for instructions on connecting NISSAN recommended
cellular phones.
When prompted for a Passkey code, enter
“1234” from the handset. The Passkey code
“1234” is assigned by NISSAN and cannot
be changed.
4. The system asks you to say a name for the
D.
phone 䊊
If the name is too long or too short, the
system tells you, then prompts you for a
name again.
Also, if more than one phone is connected
and the name sounds too much like a name
already used, the system tells you, then
prompts you for a name again.
B . The system acknowl3. Say: “Add phone” 䊊
edges the command and asks you to initiate
C.
connecting from the phone handset 䊊
2. Select the “Language & Units” key.
Monitor, climate, audio, phone and voice recognition systems 4-121
Making a call by entering a phone
number
Main Menu
A
“Call” 䊊
B
“Phone Number” 䊊
C
Speak the digits 䊊
D
“Dial” 䊊
1. Press the
button on the steering
wheel. A tone will sound.
A . The system acknowledges
2. Say: “Call” 䊊
the command and announces the next set of
available commands.
B . The system ac3. Say “Phone Number” 䊊
knowledges the command and prompts
user to select either “(7 or 10 digits)” or
“Special Number”. Select desired option to
proceed to next step.
4. Say the number you wish to call starting with
C . If the
the area code in single digit format 䊊
system has trouble recognizing the correct
phone number, try entering the number in
the following groups: 3-digit area code,
3-digit prefix and the last 4-digits. For example, 555-121-3354 can be said as “five
five five” as the 1st group, then “one two
one” as the 2nd group, and “three three five
four” as the 3rd group. For dialing more than
10 digits or any special characters, say
“Special Number”. For additional information, refer to “How to say numbers” in this
section.
5. When you have finished speaking the phone
number, the system repeats it back and announces the available commands.
D . The system acknowledges
6. Say: “Dial” 䊊
the command and makes the call.
For additional information on command options,
refer to “List of voice commands” in this section.
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
button
Once the call has ended, press the
on the steering wheel.
NOTE:
If you do not wish to take the call when you
button
hear the ring tone, press the
on the steering wheel.
For additional information on command options,
refer to “List of voice commands” in this section.
4-122 Monitor, climate, audio, phone and voice recognition systems
LIST OF VOICE COMMANDS
Main Menu
“Call”
“Phonebook”
“Recent Calls”
“Connect Phone”
When you press and release the
button on
the steering wheel, you can choose from the
commands on the Main Menu. The following
pages describe these commands and the commands in each sub-menu.
Remember to wait for the tone before
speaking.
After the main menu, you can say “Help” to hear
the list of commands currently available any time
the system is waiting for a response.
If you want to end an action without completing it,
you can say “Cancel” or “Quit” at any time the
system is waiting for a response. The system will
end the VR session. Whenever the VR session is
cancelled, a double beep is played to indicate
you have exited the system.
If you want to go back to the previous command,
you can say “Go back” or “Correction” any time
the system is waiting for a response.
B
(7 or 10 Digits) 䊊
“Call”
Main Menu
“Call”
A
(A Name) 䊊
“Phone Number”
B
(7 or 10 Digits) 䊊
C
“Special Number” 䊊
D
“Redial” 䊊
E
“Call Back” 䊊
A
(A Name) 䊊
If you have stored entries in the phonebook, you
can dial a number associated with a name
For additional information on how to store entries,
refer to “Phonebook” in this section.
When prompted by the system, say the name of
the phone book entry you wish to call. The system
acknowledges the name.
If there are multiple numbers associated with the
name, the system asks you to choose the correct
number
Once you have confirmed the name and location,
the system begins the call.
For phone numbers with 7 or 10 digits, say the
number you wish to call when prompted by the
system.
C
“Special Number” 䊊
For dialing more than 10 digits or any special
characters, say “Special Number”. When the
system acknowledges the command, the system
will prompt you to speak the number.
D
“Redial” 䊊
Use the Redial command to call the last number
that was dialed.
The system acknowledges the command, repeats the number and begins dialing.
If a redial number does not exist, the system
announces, “There is no number to redial” and
ends the VR session.
E
“Call Back” 䊊
Use the Call Back command to dial the number of
the last incoming call within the vehicle.
During a call
During a call there are several command options
button on the steering
available. Press the
wheel to mute the receiving voice and enter commands.
● “Help” — The system announces the available commands.
● “Cancel/Quit” — The system announces
“Cancel,” ends the VR session and returns
to the call.
● “Send” — Use the Send command to enter
numbers, “*” or “#” during a call. For example, if you were directed to dial an extension by an automated system:
Say: “Send one two three four.”
The system acknowledges the command
and sends the tones associated with the
numbers. The system then ends the VR session and returns to the call. Say “star” for “*”.
Say “pound” for “#”.
The system acknowledges the command, repeats the number and begins dialing.
● “Transfer call” — Use the Transfer Call command to transfer the call from the
Bluetooth® Hands-Free Phone System to
the cellular phone when privacy is desired.
If a call back number does not exist, the system
announces, “There is no number to call back” and
ends the VR session.
The system announces, “Transfer call. Call
transferred to privacy mode.” The system
then ends the VR session.
Monitor, climate, audio, phone and voice recognition systems 4-123
To reconnect the call from the cellular phone
to the Bluetooth® Hands-Free System,
button.
press the
● “Mute” — Use the Mute command to mute
your voice so the other party cannot hear it.
Use the mute command again to unmute
your voice.
NOTE:
If a call is ended or the cellular phone
network connection is lost while the Mute
feature is on, the Mute feature will be reset
to “off” for the next call so the other party
can hear your voice.
“Phonebook” (phones without
automatic phonebook download
function)
For phones that do not support automatic download of the phonebook (PBAP Bluetooth® profile), the “Phonebook” command is used to manually add entries to the vehicle phonebook.
The phonebook stores up to 40 names for each
phone connected to the system.
NOTE:
Each phone has its own separate phonebook. You cannot access Phone A’s phonebook if you are currently connected with
Phone B.
A
“Transfer Entry” 䊊
Use the Transfer Entry command to store a new
name in the system.
When prompted by the system, say the name you
would like to give the new entry.
For example, say: “Mary.”
NOTE:
The “Transfer Entry” command is not available when the vehicle is moving.
Main Menu
“Phonebook”
A
“Transfer Entry” 䊊
B
“Delete Entry” 䊊
If the name is too long or too short, the system
tells you, then prompts you for a name again.
Also, if the name sounds too much like a name
already stored, the system tells you, then prompts
you for a name again.
The system will ask you to transfer a phone
number stored in the cellular phone’s memory.
C
“List Names” 䊊
4-124 Monitor, climate, audio, phone and voice recognition systems
Enter a phone number by voice command:
For example, say: “five five five one two one two.”
For additional information, refer to “How to say
numbers” in this section.
To transfer a phone number stored in the cellular
phone’s memory:
Say “Transfer entry.” The system acknowledges
the command and asks you to initiate the transfer
from the phone handset. The new contact phone
number will be transferred from the cellular
phone via the Bluetooth® communication link.
The transfer procedure varies according to each
cellular phone. For additional information, refer to
the cellular phone Owner’s Manual.
The system repeats the number and prompts you
for the next command. When you have finished
entering numbers or transferring an entry, choose
“Store.”
The system confirms the name, location and
number.
B
“Delete Entry” 䊊
Use the Delete Entry command to erase one
entry from the phonebook. After the system recognizes the command, speak the name to delete
or say “List Names” to choose an entry.
C
“List Names” 䊊
Use the List Names command to hear all the
names in the phonebook.
The system recites the phonebook entries but
does not include the actual phone numbers.
When the playback of the list is complete, the
system goes back to the main menu.
You can stop the playback of the list at any time
button on the steering
by pressing the
wheel. The system ends the VR session.
“Phonebook” (phones with automatic
phonebook download function)
tries in the vehicle phonebook. You can say the
name of an entry at this menu to initiate dialing of
that entry.
The phonebook stores up to 1,000 names for
each phone connected to the system.
When a phone is connected to the system, the
phonebook is automatically downloaded to the
vehicle. This feature allows you to access your
phonebook from the Bluetooth® system and call
contacts by name. You can record a custom
voice tag for contact names that the system has
difficulty recognizing. For additional information,
refer to “Record Name” in this section.
NOTE:
NOTE:
The “Transfer Entry” command is not available when the vehicle is moving.
Main Menu
“Phonebook”
Say a Name
A
“List Names” 䊊
“Record (A Name)” 䊊
B
For phones that support automatic download of
the phonebook (PBAP Bluetooth® profile), the
“Phonebook” command is used to manage en-
You can stop the playback of the list at any time
button on the steering
by pressing the
wheel. The system ends the VR session. For
additional information about recording custom
voice tags for list entries that the system has
difficulty pronouncing, refer to “Record name”
command in this section.
B
“Record Name” 䊊
The system allows you to record custom voice
tags for contact names in the phonebook that the
vehicle has difficulty recognizing. This feature can
also be used to record voice tags to directly dial
an entry with multiple numbers. Up to 40 voice
tags can be recorded to the system.
“Recent Calls”
Each phone has its own separate phonebook. You cannot access Phone A’s phonebook if you are currently connected with
Phone B.
Main Menu
“Recent Calls”
A
“Outgoing” 䊊
A
“List Names” 䊊
B
“Incoming” 䊊
Use the List Names command to hear all the
names and locations in the phonebook.
D
“Call Back” 䊊
The system recites the phonebook entries but
does not include the actual phone numbers.
When the playback of the list is complete, the
system goes back to the main menu.
C
“Missed” 䊊
E
“Redial” 䊊
Use the Recent Calls command to access outgoing, incoming, missed calls and to call back the
last incoming call or to redial the last outgoing
call.
Monitor, climate, audio, phone and voice recognition systems 4-125
A
“Outgoing” 䊊
Use the Outgoing command to list the outgoing
calls made from the vehicle.
B
“Incoming” 䊊
Use the Incoming command to list the incoming
calls made to the vehicle.
C
“Missed” 䊊
Use the Missed command to list the calls made to
the vehicle that were not answered.
D
“Call Back” 䊊
Use the Call Back command to dial the number of
the last incoming call to the vehicle.
E
“Redial” 䊊
Use the Redial command to dial the number of
the last outgoing call from the vehicle.
“Connect Phone”
NOTE:
The Add Phone command is not available
when the vehicle is moving.
C
“Delete Phone” 䊊
Main Menu
“Connect Phone”
A
“Add Phone” 䊊
B
“Select Phone” 䊊
C
“Delete Phone” 䊊
D
“Turn Bluetooth OFF” 䊊
E
“Replace Phone” 䊊
Use the Connect Phone commands to manage
the phones connecting to the vehicle or to enable
the Bluetooth® function on the vehicle.
A
“Add Phone” 䊊
Use the Add Phone command to add a phone to
the vehicle. For additional information, refer to
“Connecting procedure” in this section.
B
“Select Phone” 䊊
Use the Select Phone command to select from a
list of phones connected to the vehicle. The system will list the names assigned to each phone
and then prompt you for the phone you wish to
select. Only one phone can be active at a time.
4-126 Monitor, climate, audio, phone and voice recognition systems
Use the Delete Phone command to delete a
phone that is connected to the vehicle. The system will list the names assigned to each phone
and then prompt you for the phone you wish to
delete. Deleting a phone from the vehicle will also
delete the phonebook for that phone.
D
“Turn Bluetooth OFF” 䊊
Use the Turn Bluetooth OFF command to prevent
a wireless connection to your phone.
E
“Replace Phone” 䊊
Use the Replace Phone command to replace an
existing phone pairing with a new phone. The
system will keep all voice tags assigned to your
phonebook.
VOICE ADAPTATION (VA) MODE
Voice Adaptation allows up to two out-of-dialect
users to train the system to improve recognition
accuracy. By repeating a number of commands,
the users can create a voice model of their own
voice that is stored in the system. The system is
capable of storing a different voice adaptation
model for each connected phone.
Training procedure
The procedure for training a voice is as follows.
1. Position the vehicle in a reasonably quiet
outdoor location.
2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in P (Park).
3. Press and hold the
mately 5 seconds.
button for approxi-
4. The system announces: “Press the
) button for the
PHONE/SEND (
hands-free phone system to enter the voice
adaptation mode or press the PHONE/END
) button to select a different lan(
guage.”
5. Press the
button.
For additional information on selecting a different language, refer to “Choosing a language” in this section.
6. Voice memory A or memory B is selected
automatically. If both memory locations are
already in use, the system will prompt you to
overwrite one. Follow the instructions provided by the system.
7. When preparation is complete and you are
button.
ready to begin, press the
● transfer entry
8. The VA mode will be explained. Follow the
instructions provided by the system.
● delete all entries
9. When training is finished, the system will tell
you an adequate number of phrases have
been recorded.
● phonebook delete entry
10. The system will announce that voice adaptation has been completed and the system is
ready.
The VA mode will stop if:
button is pressed for approxi● The
mately 5 seconds in VA mode.
● The vehicle begins moving during VA mode.
● The ignition switch is placed in the OFF or
LOCK position.
Training phrases
During the VA mode, the system instructs the
trainer to say the following phrases. The system
will prompt you for each phrase.
● phonebook transfer entry
● dial three oh four two nine
● delete call back number
● incoming
● eight pause nine three two pause seven
● call seven two four zero nine
● next entry
● dial star two one seven oh
● yes
● no
● select
● missed
● dial eight five six nine two
● Bluetooth on
● outgoing
● call three one nine oh two
● nine seven pause pause three oh eight
● cancel
● call back number
● call star two zero nine five
● delete phone
Monitor, climate, audio, phone and voice recognition systems 4-127
● dial eight three zero five one
MANUAL CONTROL
● record name
● delete
While using the voice recognition system, it is
possible to select menu options by using the
steering wheel controls instead of speaking voice
commands. This can be especially helpful if the
noise of driving makes it difficult for the voice
recognition system to accurately interpret commands. The manual control mode does not allow
dialing a phone number by digits. The user may
select an entry from the Phonebook or Recent
Calls lists. To re-activate voice recognition, exit
the manual control mode by pressing and holding
) button. At that time,
the PHONE/END (
pressing the PHONE/SEND (
) button will
start the Hands Free Phone System.
● dial nine seven two six six
Operating tips
● four three pause two nine pause zero
● delete redial number
● phonebook list names
● call eight oh five four one
● correction
● connect phone
● dial seven four oh one eight
● previous entry
● call seven six three oh one
● go back
● call five six two eight zero
● dial six six four three seven
● To enter manual control mode, start the
voice recognition system and tilt the tuning
) switch up or down. The system will
(
speak ⬙Showing Manual Options⬙ when
manual controls are initially activated.
4-128 Monitor, climate, audio, phone and voice recognition systems
● To browse the menu options, tilt the tuning
) switch up or down. The system will
(
always speak the current menu option. Depending on the audio display, it will also
show the current menu option.
● To select the current menu option, press the
) button.
PHONE/SEND (
● To go back to the previous menu, press the
) button. If the current
PHONE/END (
menu is the main menu, pressing the
) button will exit the
PHONE/END (
phone system.
● To exit the manual control mode, press and
) button for
hold the PHONE/END (
5 seconds.
TROUBLESHOOTING GUIDE
The system should respond correctly to all voice
commands without difficulty. If problems are encountered, try the following solutions.
Where the solutions are listed by number, try
each solution in turn, starting with number 1, until
the problem is resolved.
Symptom
System fails to interpret the command correctly.
The system consistently selects the wrong entry from the
phone book.
Solution
1. Ensure that the command is valid. For additional information, refer to “List of voice commands” in this section.
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.
4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too
noisy to use the phone, it is likely that the voice commands will not be recognized.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. For additional information, refer to “Voice Adaptation (VA) mode” in
this section.
1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by
using the “List Names” command. For additional information, refer to “Phonebook” in this section.
2. Replace one of the names being confused with a new name.
Monitor, climate, audio, phone and voice recognition systems 4-129
BLUETOOTH® HANDS-FREE PHONE
SYSTEM WITH NAVIGATION SYSTEM
(if so equipped)
WARNING
● Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.
● If you are unable to devote full attention
to vehicle operation while talking on
the phone, pull off the road to a safe
location and stop your vehicle.
CAUTION
To avoid discharging the vehicle battery,
use a phone after starting the engine.
LHA3156
Your NISSAN is equipped with the Bluetooth®
Hands-Free Phone System. If you have a compatible Bluetooth® enabled cellular phone, you
can set up the wireless connection between your
cellular phone and the in-vehicle phone module.
With Bluetooth® wireless technology, you can
4-130 Monitor, climate, audio, phone and voice recognition systems
make or receive a hands-free telephone call with
your cellular phone in the vehicle.
Once your cellular phone is connected to the
in-vehicle phone module, no other phone connecting procedure is required. Your phone is
automatically connected with the in-vehicle
phone module when the ignition switch is placed
in the ON position with the connected cellular
phone turned on and carried in the vehicle.
You can register up to 5 different Bluetooth®
cellular phones to the in-vehicle phone module.
However, you can talk on only one cellular phone
at a time.
NISSAN Voice Recognition system supports the
phone commands, so dialing a phone number
using your voice is possible. For additional information, refer to “NISSAN Voice Recognition System” in this section.
Before using the Bluetooth® Hands-Free Phone
System, refer to the following notes.
● Set up the wireless connection between a
cellular phone and the in-vehicle phone
module before using the hands-free phone
system.
● Some Bluetooth® enabled cellular phones
may not be recognized by the in-vehicle
phone
module.
Please
visit
www.nissanusa.com/bluetooth for a recommended phone list and connecting.
● You will not be able to use a hands-free
phone under the following conditions:
– Your vehicle is outside of the cellular service area.
– Your vehicle is in an area where it is
difficult to receive cellular signal; such as
in a tunnel, in an underground parking
garage, near a tall building or in a mountainous area.
– Your cellular phone is locked to prevent it
from being dialed.
● When the radio wave condition is not ideal
or ambient sound is too loud, it may be
difficult to hear the other person’s voice during a call.
● Immediately after the ignition switch is
placed in the ON position, it may be impossible to receive a call for a short period of
time.
● Do not place the cellular phone in an area
surrounded by metal or far away from the
in-vehicle phone module to prevent tone
quality degradation and wireless connection
disruption.
● If the hands-free phone system seems to be
malfunctioning, refer to “Troubleshooting
guide” in this section. You can also visit
www.nissanusa.com/bluetooth for troubleshooting help.
● Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers. Storing the device in a different location may
reduce or eliminate the noise.
● Refer to the cellular phone owner’s manual
regarding the telephone charges, cellular
phone antenna and body, etc.
● The signal strength display on the monitor
will not coincide with the signal strength
display of some cellular phones.
● If reception between callers is unclear, adjusting the incoming or outgoing call volume
may improve the clarity. For additional information, refer to “Call volume” in this section.
● While a cellular phone is connected through
the Bluetooth® wireless connection, the
battery power of the cellular phone may discharge quicker than usual. The Bluetooth®
Hands-Free Phone System cannot charge
cellular phones.
Monitor, climate, audio, phone and voice recognition systems 4-131
REGULATORY INFORMATION
BLUETOOTH® is a
trademark owned by
Bluetooth SIG, Inc.
and licensed to
Clarion.
FCC Regulatory information
– CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regulations.
– Operation is subject to the following two conditions:
1. This device may not cause interference and
2. this device must accept any interference,
including interference that may cause undesired operation of the device.
IC Regulatory information
– Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.
– This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
VOICE COMMANDS
You can use voice commands to operate various
Bluetooth® Hands-Free Phone System features
using the NISSAN Voice Recognition system. For
additional information, refer to “NISSAN Voice
Recognition System” in this section.
Voice Prompt Interrupt
In most cases you can interrupt the voice feedback to speak the next command by pressing
button on the steering wheel. After
the
interrupting the system, wait for a beep before
speaking your command.
One Shot Call
To use the system faster, you may speak the
second level commands with the main menu
command on the main menu. For example, press
button and after the tone say, “Call
the
Redial”.
4-132 Monitor, climate, audio, phone and voice recognition systems
NOTE:
For US models, voice recognition system
must be in Alternate Command Mode in
order for One Shot Calling to operate. For
additional information, refer to “NISSAN
Voice Recognition Alternate Command
Mode” in this section.
CONNECTING PROCEDURE
Press the SETTING button on the control panel,
then touch the “Bluetooth” key on the display.
LHA1236
Menu Item
Bluetooth ON/OFF
ON
OFF
Connect Bluetooth
Yes
Cancel
No
Cancel
Result
Allows user to switch Bluetooth on and off. Bluetooth must be on in order to connect device.
Turns Bluetooth on.
Turns Bluetooth off.
Upon pressing this button, a popup box will appear on the screen, prompting you to confirm that the connection is for the phone system. Select
the ⬙Yes⬙ key.
Confirms that you are connecting a Bluetooth device. Upon pressing this button, the following message will appear on screen: ⬙The system is
searching for your phone. Using your handset, look for a Bluetooth device called MY-CAR. When requested by the handset, enter the PIN 1234.
Exiting screen cancels search.⬙ The connecting procedure varies by phone. For additional information, refer to the phone Owner’s Manual. When
the connecting is complete, the screen will return to the Bluetooth settings screen.
Cancels operation.
Indicates to the system that you are connecting a Bluetooth enabled audio device.
Cancels operation.
Monitor, climate, audio, phone and voice recognition systems 4-133
VEHICLE PHONEBOOK
This vehicle has two phonebooks available for
your use. Depending on your phone, the system
may automatically download your entire cell
phone’s phonebook into the “Handset Phonebook”. For additional information on downloading
Menu Item
Copy from Call History
Copy from the Handset
Enter Number by Keypad
Ok
Entry #
Name
Number
Type
Voicetag
Store
OK
your phonebook, refer to “Handset Phonebook”
in this section. If your phonebook does not automatically download, you may set up the vehicle
phonebook with up to 40 entries. This phonebook allows you to record a name to speak while
using voice recognition.
button on the steering wheel
Press the
and then touch the ⬙Vehicle Phonebook⬙ key.
Touch the ⬙Add New⬙ key at the top of the screen.
This will allow the user to add new phonebook
content via the methods listed below:
Result
The system will show a list of your incoming, outgoing, or missed calls that were downloaded from your cell phone (depending on your
phone’s compatibility). You may select one of these entries to save in the vehicle phonebook.
The system will show your cell phone’s phonebook that was downloaded (depending on your phone’s compatibility). You may select one of
these entries to save in the vehicle phonebook.
Allows manual entry of phonebook contacts
Saves the phonebook entry and then will show a screen that is ready to call the number. Press the BACK button to return to the Vehicle
Phonebook
Allows user to choose the entry number
Allows user to enter the contact name
Allows user to enter the contact number
Allows user to choose a type from the icon list
Select the ⬙Voicetag⬙ key to record a name to speak when using the Voice Recognition system
Select the ⬙Store⬙ key and prepare to speak the name after the tone
When the voicetag is successfully saved, select the ⬙OK⬙ key to save the phonebook entry
4-134 Monitor, climate, audio, phone and voice recognition systems
Press the
button on the steering wheel
and then select the ⬙Vehicle Phonebook⬙ key.
Next, select the desired entry from the displayed
list. Select the ⬙Edit⬙ key.
Menu Item
Entry #
Name
Number
Type
Voicetag
Result
Changes the displayed number of the selected entry
Edit the name of the entry using the keypad displayed on the screen
Edit the phone number using the keypad displayed on the screen
Select the icon from the icon list
Confirm and store the voicetag. Voicetags allow easy dialing using the NISSAN Voice Recognition
System. For additional information, refer to ⬙NISSAN Voice Recognition System⬙ in this section.
Monitor, climate, audio, phone and voice recognition systems 4-135
To transfer the handset phonebook to the vehicle
manually, follow these steps:
HANDSET PHONEBOOK
Many phones will support an automatic download of the cellular phone’s phonebook. Since
this method allows for up to 1,000 numbers to be
stored and entries are automatically assigned
voice tags by the system, this is a useful function
for easy dialing supported by the Voice Recognition system.
1. Press the SETTING button on the control
panel.
2. Touch the “Phone” key.
3. Touch the “Download Handset Phonebook”
key.
LHA1319
Transferring the handset phonebook
If your cellular phone supports automatic downloading, the system transfers the handset phonebook automatically by default. To ensure that this
feature is activated, press the SETTING button
on the instrument panel and touch the “Phone”
key. The “Auto Downloaded” selection should
have the amber indicator next to the word ON
activated. Touch the “Auto Downloaded” key to
toggle this feature on or off.
4-136 Monitor, climate, audio, phone and voice recognition systems
Once the handset phonebook is transferred to
the vehicle, it can be accessed by pressing the
PHONE key on the instrument panel or the
button on the steering wheel, then touching the
“Handset Phonebook” key.
Whether the handset phonebook is transferred
manually or automatically, the process can take
up to 5 minutes to complete, depending on the
size of the handset phonebook. For additional
information, refer to the cellular phone’s owner’s
manual.
MAKING A CALL
Press the
button on the steering wheel.
The ⬙Phone⬙ screen will appear on the display.
Select one of the following options to make a call:
LHA1322
Menu Item
Vehicle Phonebook
Call History
Handset Phonebook
Dial Number
Result
Select the name from an entry stored in the vehicle phonebook. Dialing commences immediately.
Select the name from the incoming or outgoing call history. Dialing commences immediately.
Select the name from an entry stored in the handset phonebook. Dialing commences immediately.
Input the phone number manually using the keypad on the screen. It will be necessary to select ⬙OK⬙ when finished for dialing to commence. For
additional information on using the touch-screen, refer to ⬙How to use the touch-screen⬙ in this section.
Monitor, climate, audio, phone and voice recognition systems 4-137
RECEIVING A CALL
When you hear a phone ring, the display will
change to phone mode. To receive a call, follow
one of the procedures listed below:
Menu Item
Press the
button on the steering
wheel
⬙Answer⬙ key on the display
⬙Hold Call⬙ key on the display
⬙Reject Call⬙ key on the display
4-138 Monitor, climate, audio, phone and voice recognition systems
Result
Accept an incoming call to talk.
Accept an incoming call to talk.
Put an incoming call on hold.
Reject an incoming call.
DURING A CALL
There are some options available during a call.
Select one of the following displayed on the
screen, if necessary:
Menu Item
Hang Up
Use Handset
Mute
Cancel
Mute
Keypad
Note
Switch Call
Result
Finish the call. If pressed while another caller is on hold, current call will be ended and user will be able to speak to the caller that was previously on hold.
Transfer the call to the cellular phone.
Mute your voice to the person.
This will appear after the ⬙Mute⬙ key is selected. Mute will be cancelled.
Brings up a keypad. Enter digits when needed. For example, entering your PIN number for voicemail.
Press the
button during a call to send numbers and digits using Voice Recognition.
Select this option to answer another incoming call (function may not be available depending on the model of the phone).
ENDING A CALL
To finish the call, perform one of the following
procedures:
Menu Item
⬙Hang up⬙ key on the ⬙Call in
Progress⬙ Display
Result
Finish the call.
button on the steering wheel
Finish the call.
Monitor, climate, audio, phone and voice recognition systems 4-139
PHONE SETTINGS
To set up the Bluetooth® Hands-Free Phone
System to your preferred settings, press the SETTING button on the control panel and touch the
⬙Phone⬙ key on the display.
Menu Item
Edit Vehicle Phonebook
Delete Phonebook
Download Handset Phonebook
Volume and Ringtone
Automatic Hold
Vehicle Ringtone
Auto Downloaded
Result
For additional information on adding, editing, and deleting contacts in the vehicle phonebook, refer to ⬙Vehicle Phonebook⬙ in this section.
Delete a phonebook stored on the system.
For additional information on adding, editing, and deleting contacts in the handset phonebook, refer to ⬙Handset Phonebook⬙ in this
section.
Adjust the volume level of the ringtone, incoming call sound and outgoing call sound.
When this option is turned on, an incoming call will be placed on hold automatically after several rings.
When this option is turned on, a specific ringtone that is different than the cellular phone’s will sound when receiving a call.
For additional information about automatically downloading the handset phonebook, refer to “Handset Phonebook” in this section.
4-140 Monitor, climate, audio, phone and voice recognition systems
BLUETOOTH® SETTINGS
To set up the Bluetooth® Hands-Free Phone
System to your preferred settings, press the SETTING button on the control panel and touch the
⬙Bluetooth⬙ key on the display.
Menu Item
Bluetooth
Connect Bluetooth
Connected Devices
Edit Bluetooth Info
Replace Connected
Phone
Result
Turn the Bluetooth® system on or off.
For additional information about connecting a phone, refer to ⬙Connecting Procedure⬙ in
this section.
Display a list of the Bluetooth® devices connected to the system.
Check information about the device name, device address, and device PIN.
Replace the phone currently connected to the system. This option allows you to keep any
voice tags that were recorded using the previous phone.
Monitor, climate, audio, phone and voice recognition systems 4-141
CALL VOLUME
Adjusting the incoming or outgoing call volume
may improve clarity if reception between callers is
unclear. To access the volume settings, press the
SETTING button, then touch ”Volume and
Beeps”. You can also adjust the volume of an
incoming voice during a call by pushing the volume control switch on the steering wheel or by
turning the volume control knob on the control
panel:
Menu Item
Ringtone
Incoming Call
Outgoing Call
Result
Adjusting this setting allows ringer volume to be set at a desired level.
Adjusting this setting allows you to hear a difference in volume (You can also adjust the volume of an incoming voice during a call by
pushing the volume control switch on the steering wheel or by turning the volume control knob).
Adjusting this setting allows the person you are talking with to hear a difference in volume.
4-142 Monitor, climate, audio, phone and voice recognition systems
NISSAN VOICE RECOGNITION
SYSTEM (if so equipped)
NISSAN Voice Recognition allows hands-free
operation of the systems equipped on this vehicle, such as phone and vehicle information.
ditional information, refer to “NISSAN Voice Recognition Alternate Command Mode” in this section.
There are two voice recognition modes of operation available. They are:
To improve the recognition success rate when
Alternate Command Mode is active, try using the
Speaker Adaptation Function available in that
mode. For additional information, refer to
“Speaker Adaptation Function” in this section.
Otherwise, it is recommended that Alternate
Command Mode be turned off and Standard
Mode be used for the best recognition performance.
● Standard Mode
● Alternate Command Mode
In Standard Mode (the factory default setting),
commands that are available are always shown
on the display and announced by the system. You
can complete your desired operation by simply
following the prompts given by the system. Not all
NISSAN Voice Recognition options are available
while in Standard Mode.
For advanced operation, you can change to an
Alternate Command Mode that enables the operation of the display and audio system through
NISSAN Voice Recognition. When this mode is
active, an expanded list of commands can be
button on the
spoken after pressing the
steering wheel, and the voice command menu
prompts are turned off.
In Alternate Command Mode the recognition
success rate may be affected because the number of available commands and the ways of
speaking each command are increased. For ad-
While using the NISSAN Voice Recognition system for certain Phone and Navigation features,
you can switch to using manual controls (touchscreen, NISSAN controller, steering wheel controls) and the information you have already entered by voice control will be retained. To switch
to manual controls, touch the “Manual Controls”
key on the display when it appears. The system
will respond by speaking “Changing to manual
operation. Please use manual controls to continue.”
Mode” in this section. For vehicles in Canada, the
factory default setting is the Alternate Command
Mode. For additional information, refer to “Alternate Command Mode” in this section.
NISSAN VOICE RECOGNITION
STANDARD MODE
The Standard Mode enables control of navigation, phone and vehicle information. With this
setting active, commands that are available are
always shown on the display and announced by
the system.
Displaying user guide
If you use the NISSAN Voice Recognition system
for the first time or you do not know how to
operate it, you can display the User Guide for
confirmation.
You can confirm how to use voice commands by
accessing a simplified User Guide, which contains basic instructions and tutorials for several
voice commands.
For the voice commands for the navigation system, refer to the Navigation System Owner’s
Manual of your vehicle.
1. Press the INFO button on the control panel.
For vehicles in the U.S., the factory default setting
is the Standard Mode. For additional information,
refer to “NISSAN Voice Recognition Standard
3. Touch the “User Guide” key.
2. Touch the “Voice Recognition” key.
4. Select an item.
Monitor, climate, audio, phone and voice recognition systems 4-143
NOTE:
You can skip steps 1 to 3 by pressing
button and saying “Help” folthe
lowed by “User Guide”.
Menu Item
Getting Started
Let’s Practice
Try again
Done
Using the Address Book
Finding a Street Address
Placing Calls
Help on Speaking
Result
The following message will appear: ⬙With voice recognition, you can use voice commands to control navigation, audio, phone, and other
functions. To start the voice recognition system, push the TALK switch on the steering wheel, then say a command after the tone.⬙
Initiates a practice session that demonstrates how to improve voice recognition by the system. The system will prompt you to say a phone
number. After you say the number, the system will provide feedback to improve voice recognition. When you are ready, push the TALK
switch.
Allows user to repeat the session if improvement is needed.
Completes practice session and returns user to the User Guide screen.
Initiates tutorial for using the Address Book.
Initiates a tutorial for finding a street address.
Initiates tutorial for making a phone call by voice command operation.
Displays useful tips of speaking for correct command recognition by the system: ⬙Say commands when there are minimal background
sounds; Say voice commands clearly; Avoid talking slow or with long pauses; Say commands after the tone.⬙
4-144 Monitor, climate, audio, phone and voice recognition systems
Voice recognition settings
The available settings of the NISSAN Voice Recognition system are described.
1. Press the SETTING button on the control
panel
2. Touch “Others” key
3. Touch the “Voice Recognition” key
You can confirm the page by scrolling the screen
using the NISSAN controller.
Menu Item
Command List
User Guide
Speaker Adaptation
Alternate Command Mode
Minimize Voice Feedback
Result
When Alternate Command Mode is activated, this key will allow user to access the list of Phone, Navigation, Information, Audio, and Help
commands.
Allows user access to user guide settings. For additional information, refer to “Displaying User Guide” in this section.
When Alternate Command Mode is activated, this key will allow user to initiate a system function for better voice recognition performance. For
additional information, refer to “Speaker Adaptation Function” in this section.
Allows user to activate Alternate Command Mode. A screen will appear prompting user to review the expanded command list and advises that
some command will be replaced and voice menu prompts turned off. User will have to confirm by pressing “OK” to proceed with activation.
When Alternate Command Mode is activated, this key will allow user to reduce system voice feedback during voice recognition session.
Monitor, climate, audio, phone and voice recognition systems 4-145
USING THE SYSTEM
Initialization
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
which takes a few seconds. When completed,
the system is ready to accept voice commands. If
switch is pressed before the initializathe
tion completes, voice commands will not be accepted. Please wait until the NISSAN Voice Recognition initialization is completed.
BEFORE STARTING
To get the best recognition performance from
Voice Recognition, observe the following:
● The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the
system from correctly recognizing the voice
commands.
LHA2479
GIVING VOICE COMMANDS
1. Press the
ing wheel.
switch located on the steer-
● Wait until the tone sounds before speaking a
command.
● Speak in a natural conversational voice without pausing between words.
● If the air conditioner is set to “Auto”, the fan
speed is automatically lowered so that your
commands can be recognized more easily.
4-146 Monitor, climate, audio, phone and voice recognition systems
LHA2993
2. The system makes an announcement.
3. After the tone sounds and the icon on the
to
, speak
screen changes from
a command.
4. Continue to follow the voice menu prompts
and speak after the tone sounds until your
desired operation is completed.
Operating tips
● Say a command after the tone. Voice commands cannot be accepted when the icon
.
is
● Commands that are available are always
shown on the display and spoken through
voice menu prompts. Commands other than
those that are displayed are not accepted.
Please follow the prompts given by the system.
● If the command is not recognized, the system repeats the announcement. Repeat the
command in a clear voice.
● Say “Back” when prompted to return to the
previous screen.
● If you want to cancel the command, press
button. The message,
and hold the
“Voice recognition is cancelled” will be announced.
How to speak numbers
Voice Recognition requires a certain way to
speak numbers when giving voice commands.
Refer to the following examples.
General rule
NOTE:
● Only single digits 0 (zero) to 9 can be used.
● When saying the phone number 800-6626200, the system will accept “eighthundred” in addition to “eight zero zero” or
“eight oh oh”. 500, 700, and 900 are also
supported.
When speaking a house number, speak the
number “0” as “zero” or “oh”. If the letter
“O” is included in the house number, it will
not be recognized as “0” even if you speak
“oh” instead of “zero”.
Examples
● 1-800-662-6200
– “One eight zero zero six six two six two
zero zero”
– “One eight hundred six six two six two
zero zero”
Improving Recognition of Phone numbers
You can improve the recognition of phone numbers by saying the phone number in three groups
of numbers. For example, when you try to call
800-662-6200, say “eight zero zero” first, and
the system will then ask you for the next 3 digits.
Then, say “six six two”. After recognition, the
system will then ask for the last 4 digits. Say, “six
two zero zero”. Using this method of phone digit
entry can improve recognition performance.
Monitor, climate, audio, phone and voice recognition systems 4-147
Standard Mode command list
Category Commands
COMMAND
Phone
Navigation
Information
Audio
Call (name)
Help
ACTION
Displays Phone function commands.
Displays Navigation function commands.
Displays Vehicle Information.
Displays Audio commands.
Makes a call to a contact that is stored in either phonebook. Please say “Call” followed by a stored name.
Displays user guide (this command is not displayed on the screen).
Phone Commands
COMMAND
Dial Number
Vehicle Phonebook
Handset Phonebook
Call History
International Call
ACTION
Makes a call to a spoken phone number up to 10 digits.
Makes a call to a contact that is stored in the vehicle phonebook.
Makes a call to a contact that is stored in the handset phonebook.
Makes a call to a number in the incoming or outgoing call logs.
Makes an international call by allowing more than 10 digits to be spoken, as well as star (*), pound (#), and plus (+).
Navigation Commands
COMMAND
Destination Home
Address
Places
Address Book
Previous Destinations
ACTION
Sets a route to your home that is stored in the Address Book.
Allows user to set destination address.
Sets a route to a facility near the current vehicle location.
Searches for a location stored in the Address Book.
Sets a route to a previous destination.
4-148 Monitor, climate, audio, phone and voice recognition systems
Vehicle Information Commands
COMMAND
Fuel Economy
Maintenance
Traffic Information
Where am I?
ACTION
Displays Fuel Economy information.
Displays Maintenance information.
Turns the traffic information system on and off.
Displays current vehicle location.
Audio Commands
COMMAND
AM
FM
XM
CD
ACTION
Changes the audio system mode to AM radio.
Changes the audio system mode to FM radio.
Changes the audio system mode to XM radio.
Changes the audio system mode to CD.
Monitor, climate, audio, phone and voice recognition systems 4-149
8. The system announces, “Please say the last
4 digits or say change number.”
Voice command examples
Some basic voice command examples are described here.
9. Say “6200”.
10. The system announces, “Dial or Change
Number?”
For navigation system commands, refer to the
separate Navigation System Owner’s Manual.
11. Say “Dial”.
12. The system makes a call to 800-662- 6200.
NOTE:
LHA2479
Example 1 — Placing a call to the phone
number 800-662-6200:
1. Press the
ing wheel.
button located on the steer-
2. The system makes an announcement.
3. Say “Phone”.
4. Say “Dial Number”.
5. Say “800”.
6. The system announces, “Please say the next
3 digits or dial, or say change number.”
7. Say “662”.
4-150 Monitor, climate, audio, phone and voice recognition systems
● You can also speak “800-662-6200” (10
continuous digits) or “662-6200” (7 continuous digits), if the area code is not necessary. However, the 3-3-4 digit grouping is
recommended for improved recognition. Refer to “How to speak numbers” in this section.
● You can only say a phone number using the
3-3-4 grouping, 7 digits, and 10 digits using
this command. Please use the “International
Call” command for all other formats, and
when special characters such as star (*),
pound (#), and plus (+) need to be entered.
● If you say “Change Number” during phone
number entry, the system will automatically
request that you repeat the number using
the 3-3-4 format. In this case please say the
area code first and then follow the prompts.
● Do not add a “1” in front of the area code
when speaking phone numbers.
NOTE:
Any digit input format is available in the
International Number input process, as
well as the special characters such as star
(*), pound (#), and plus (+).
● If the system does not recognize your command, please try repeating the command
using a natural voice. Speaking too slowly or
too loudly may further decrease recognition
performance.
NISSAN VOICE RECOGNITION
ALTERNATE COMMAND MODE
LHA2479
Example 2 — Placing an international call
to the phone number 011-81-111-222-3333:
button located on the steer-
1. Press the
ing wheel.
2. The system makes an announcement.
3. Say “Phone”.
4. Say “International Call”.
5. Say “011811112223333”.
6. Say “Dial”.
7. The system makes a call to 011-81-111222-3333.
The Alternate Command Mode enables control of
the audio and display systems as well as additional commands for the Vehicle Information,
Phone and Navigation systems. With this setting
active, the system does not announce or display
the available commands at each step.
When Alternate Command Mode is activated, an
expanded list of commands can be used after
button. Under this mode, the
pressing the
screen for Standard Mode commands is not
available on the display. Please review the expanded command list, available when this mode
is active, as some Standard Mode commands are
replaced. Please see examples of Alternate
Command Mode screens.
Please note that in this mode the recognition
success rate may be affected as the number of
available commands and ways of speaking each
command are increased. You can turn this mode
ON or OFF. When this mode is activated, the
Voice Recognition Settings will change to show
more options.
Monitor, climate, audio, phone and voice recognition systems 4-151
Activating Alternate Command Mode
1. Press the SETTING button on the control
panel.
2. Touch the “Others” key on the display.
3. Touch the “Voice Recognition” key.
4. Touch the “Alternate Command Mode” key.
5. The confirmation message is displayed on
the screen. Select the “OK” key to activate
the Alternate Command Mode.
6. Alternate Command Mode is activated and
the setting menu is expanded to include the
Alternate Command Mode options. For additional information, refer to “Voice Recognition Settings” in this section for an explanation of the options.
Displaying the command list
If you are controlling the system by voice commands for the first time or do not know the
appropriate voice command, perform the following procedure for displaying the voice command
list (available only in Alternate Command Mode).
As an alternative to the voice command “Help”,
you may access the command list using the following steps:
1. Press the SETTING button on the control
panel.
2. Select the “Others” key using the NISSAN
controller.
3. Select the “Voice Recognition” key using the
NISSAN controller.
NOTE:
You can skip steps 1 to 3 if you say “Help”.
4. Select the “Command List” key using the
NISSAN controller.
5. Select a category using the NISSAN controller. The command list for the category
selected is shown.
6. If necessary, scroll the screen using the
NISSAN controller to view the entire list.
7. Press the BACK button to return to the
previous screen.
switch, listen for the tone and
Press the
say, “Help”. The system will respond by displaying the command list main menu.
Only manual controls such as the touch-screen
can navigate the command list menu.
4-152 Monitor, climate, audio, phone and voice recognition systems
Alternate Command Mode command list
Phone Command
COMMAND
Dial Number
Vehicle Phonebook
Handset Phonebook
International Call
Call <name>
Incoming Calls
Outgoing Calls
Missed Calls
ACTION
Makes a call to a spoken phone number up to 10 digits.
Makes a call to a contact in the vehicle phonebook.
Makes a call to a contact in the handset phonebook.
Makes an international call by allowing more than 10 digits to be spoken, as well as star (*), pound (#), and plus (+).
Makes a call to a contact that is stored in either the Vehicle Phonebook or Handset Phonebook. Please say “Call” followed by a stored
name.
Shows the last 5 incoming phone calls.
Shows the last 5 outgoing phone calls.
Shows the last 5 missed phone calls.
Navigation Command
COMMAND
Home
Address
Places
Address Book
Previous Destinations
Previous Start Point
Minimize Freeway Route
Fastest Route
Shortest Route
Cancel Route
Delete Destination
Birdview Map
ACTION
Sets a route to your home that is stored in the Address Book.
Searches for a location by the street address specified, and sets a route (for continental US and Canada only).
Sets a route to a facility near the current vehicle location.
Displays the first 5 entries of the Address Book.
Sets a route to a previous destination.
Calculates a route to your previous starting point of the last route.
Recalculates a route to the current destination while minimizing freeway usage.
Recalculates a route to the current destination using the fastest estimated time.
Recalculates a route to the current destination using the shortest distance.
Cancels the current route.
Deletes the current destination.
Changes the Map display to Birdview.
Monitor, climate, audio, phone and voice recognition systems 4-153
COMMAND
Planview Map
North Up
Heading Up
Zoom In <1 to 13>
Zoom Out <1 to 13>
Guidance Voice ON/OFF
Guide Voice Repeat
ACTION
Changes the Map display to a 2-dimensional view.
Changes the Map display to keep north pointing up on the screen.
Changes the Map display to keep the direction of the vehicle pointing up on the screen.
Changes the map scale to a smaller number.
Changes the map scale to a larger number.
Turns the navigation voice guidance on or off.
Repeats the last navigation voice guidance.
Information Command
COMMAND
Fuel Economy
Maintenance
Traffic Information
Where am I?
Weather Information
Weather Map
ACTION
Displays Fuel Economy information.
Display Maintenance information.
Turns the traffic information system on and off.
Displays the current vehicle location.
Displays weather information.
Displays the current weather map.
Audio Command
COMMAND
AM
FM
XM
CD
USB
Bluetooth Audio
AUX
ACTION
Turns to the AM band, selecting the station last played.
Turns to the FM band, selecting the station last played.
Turns to the SAT band, selecting the station last played.
Starts to play a CD.
Turns to the USB audio input.
Turns to the Bluetooth® audio system.
Turns to the AUX input.
4-154 Monitor, climate, audio, phone and voice recognition systems
Displaying user guide
You can confirm how to use voice commands by
accessing a simplified User Guide, which contains basic instructions and tutorials for several
voice commands.
1. Press the INFO button on the control panel.
2. Touch the “Voice Recognition” key.
3. Touch the “User Guide” key.
4. Touch an item.
Menu Item
Getting Started
Let’s Practice
Using the Address Book
Finding a Street Address
Placing Calls
Help on Speaking
Voice Recognition Settings
Adapting the System to Your Voice
Result
Describes the basics of how to operate the Voice Recognition system.
Initiates a practice session that demonstrates how to improve recognition by the system
Tutorial for using the Address Book
Tutorial for Finding a Street Address
Tutorial for making a phone call by voice command operation
Displays useful tips for how to correctly speak commands in order for them to be properly recognized by the system
Describes the available Voice Recognition settings. For additional information, refer to “Voice Recognition Settings” in this section
Tutorial for adapting the system to your voice
Monitor, climate, audio, phone and voice recognition systems 4-155
USING THE SYSTEM
Initialization
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
which takes a few seconds. When completed,
the system is ready to accept voice commands. If
switch is pressed before the initializathe
tion completes, the display will show the message: “System not ready.” or a beep sounds.
Before starting
To get the best performance from NISSAN Voice
Recognition, observe the following:
● Keep the interior of the vehicle as quiet as
possible. Close the windows to eliminate the
surrounding noises (traffic noises, vibration
sounds, etc.), which may prevent the system
from recognizing the voice commands correctly.
LHA2479
LHA2993
button located
2. A list of commands appears on the screen,
and the system announces, “Please say a
command from the displayed list or say Help
to show all commands.”
Giving voice commands
1. Press and release the
on the steering wheel.
● When the climate control is in the AUTO
mode, the fan speed decreases automatically for easy recognition.
● Wait until a tone sounds before speaking a
command.
● Speak in a natural voice without pausing
between words.
4-156 Monitor, climate, audio, phone and voice recognition systems
3. After the tone sounds and the icon on the
screen changes from
a command.
to
, speak
4. Once a command is recognized, the system
will announce the recognized command and
perform the requested action.
If the command is not recognized, the system repeats the announcement. Repeat the
command in a clear voice after the tone.
Operating tips
How to speak numbers
● Say a command after the tone. Voice commands cannot be accepted when the icon
.
is
Voice Recognition requires a certain way to
speak numbers when giving voice commands.
Refer to the following examples.
● If the command is not recognized, the system repeats the announcement. Repeat the
command in a clear voice.
General rule
● Say “Back” when prompted to return to the
previous screen.
● If you want to cancel the command, press
button. The message,
and hold the
“Voice recognition is cancelled” will be announced.
● If you want to adjust the volume of the system feedback, push the volume control
switch on the steering wheel or use the
audio system volume knob while the system
is making an announcement.
● To minimize the amount of prompts spoken
by the system in Alternate Command Mode,
use the Minimize Voice Feedback function.
To access the Minimize Voice Feedback
function press the SETTING button, then
select the “Others” key. Then select the
“Voice Recognition” key.
● Only single digits 0 (zero) to 9 can be used.
● When saying the phone number 800-6626200, the system will accept “eighthundred” in addition to “eight zero zero” or
“eight oh oh”. 500, 700, and 900 are also
supported.
Examples
two zero zero”. Using this method of phone digit
entry can improve recognition performance.
NOTE:
When speaking a house number, speak the
number “0” as “zero” or “oh”. If the letter
“O” is included in the house number, it will
not be recognized as “0” even if you speak
“oh” instead of “zero”.
Settings menu
The content of the Settings Menu differs when
the system is in the Alternate Command Mode.
Command List
● 1-800-662-6200
– “One eight zero zero six six two six two
zero zero”
– “One eight hundred six six two six two
zero zero”
Improving Recognition of Phone numbers
You can improve the recognition of phone numbers by saying the phone number in three groups
of numbers. For example, when you try to call
800-662-6200, say “eight zero zero” first, and
the system will then ask you for the next 3 digits.
Then, say “six six two”. After recognition, the
system will then ask for the last 4 digits. Say, “six
Displays the command list for Alternate Command Mode.
User Guide
The user guide provides basic instructions for
using Voice Recognition and accessing some
voice commands.
NOTE:
The user guide can also be accessed from
within the INFO menu after pressing the
INFO button.
Monitor, climate, audio, phone and voice recognition systems 4-157
Speaker Adaptation
5. Touch the user whose voice is to be memorized by the system.
Starts a system training procedure to learn the
specific sounds of your voice. For additional information, refer to “Speaker adaptation function”
in this section.
6. Touch a category to be learned by the system from the following list:
● Phone
Alternate Command Mode
● Navigation
For advanced operation, an Alternate Command
Mode is provided. This setting enables control of
the audio system as well as additional commands
for the Phone and Navigation systems. With this
setting active, the system does not announce or
display the available commands at each step.
When this mode is activated, the Voice Recognition Settings will change to show more options.
● Information
Minimize Voice Feedback
Reduces the amount of the information spoken
for each voice instruction.
● Audio
● Help
The voice commands in the category are
displayed.
LHA1341
SPEAKER ADAPTATION FUNCTION
The Voice Recognition system has a function to
learn the user’s voice for better voice recognition
performance. The system can memorize the
voices of up to three persons.
Having the system learn the user’s
voice
1. Press the SETTING button on the control
panel
2. Touch the “Others” key on the display.
3. Touch the “Voice Recognition” key.
4. Touch the “Speaker Adaptation” key.
4-158 Monitor, climate, audio, phone and voice recognition systems
7. Select a voice command to train.
The Voice Recognition system starts.
8. The system requests that you repeat a command after a tone. This command is also
displayed on the screen.
9. After the tone sounds and the icon on the
to
, speak
screen changes from
the command that the system requested.
10. When the system has recognized the voice
command, the voice of the user is learned.
switch or the BACK button to
Press the
return to the previous screen.
If the system has learned the command correctly, the
voice command indicator on the screen turns on.
Speaker Adaptation function settings
TROUBLESHOOTING GUIDE
Edit Name
The system should respond correctly to all voice
commands without difficulty. If problems are encountered, follow the solutions given in this guide
for the appropriate error.
Edit the user name using the keypad displayed on
the screen.
Reset Result
Resets the user’s voice that the Voice Recognition system has learned.
Where the solutions are listed by number, try
each solution in turn, starting with number one,
until the problem is resolved.
Continuous Learning
When this item is turned to ON, you can have the
system learn the voice commands in succession,
without selecting commands one by one.
Symptom/error message
Displays “COMMAND NOT RECOGNIZED” or the system fails to interpret
the command correctly.
Solution
1. Ensure that the command format is valid, refer to “Standard Mode command list” or “Alternate Command Mode command list” in this
section.
2. Speak clearly using your normal speech pattern and at a level appropriate to the ambient noise level.
3. Ensure that the ambient noise level is not excessive, for example, windows open or defrost on.
NOTE:
If it is too noisy to use the phone, it is likely that voice commands will not be recognized.
The system consistently selects the
wrong voicetag in the phonebook.
1. Ensure that the voicetag requested matches what was originally stored. For additional information, refer to “Bluetooth® Hands-Free
Phone System with Navigation System” in this section.
2. Replace one of the voicetags being confused with a different voicetag.
Monitor, climate, audio, phone and voice recognition systems 4-159
5 Starting and driving
Precautions when starting and driving. . . . . . . . . . . . . . . . 5-2
Exhaust gas (carbon monoxide) . . . . . . . . . . . . . . . . . . 5-2
Three-way catalyst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Tire Pressure Monitoring System (TPMS). . . . . . . . . . 5-3
On-pavement and off-road driving
precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Avoiding collision and rollover . . . . . . . . . . . . . . . . . . . . 5-6
Off-road recovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Rapid air pressure loss . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Drinking alcohol/drugs and driving. . . . . . . . . . . . . . . . 5-8
Driving safety precautions . . . . . . . . . . . . . . . . . . . . . . . 5-8
Push-Button Ignition Switch . . . . . . . . . . . . . . . . . . . . . . . 5-10
Operating range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11
Push-button ignition switch positions . . . . . . . . . . . . 5-11
Emergency engine shut off . . . . . . . . . . . . . . . . . . . . . 5-12
NISSAN Intelligent Key® battery discharge. . . . . . . 5-12
NISSAN Vehicle Immobilizer System . . . . . . . . . . . . . 5-13
Before starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . 5-13
Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
Remote start (if so equipped) . . . . . . . . . . . . . . . . . . . 5-14
Driving the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
Continuously Variable Transmission (CVT) . . . . . . . . 5-15
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
Blind Spot Warning (BSW) System
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
Blind Spot Warning (BSW) system . . . . . . . . . . . . . . 5-19
BSW system operation . . . . . . . . . . . . . . . . . . . . . . . . 5-20
BSW system precautions . . . . . . . . . . . . . . . . . . . . . . 5-22
BSW driving situations . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Radar maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
The Rear Cross Traffic Alert (RCTA) system
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27
RCTA system operation . . . . . . . . . . . . . . . . . . . . . . . . 5-27
RCTA system precautions . . . . . . . . . . . . . . . . . . . . . . 5-28
RCTA system operation . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Radar maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Cruise control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
Precautions on cruise control . . . . . . . . . . . . . . . . . . . 5-32
Cruise control operations. . . . . . . . . . . . . . . . . . . . . . . 5-33
Break-in schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34
Fuel efficient driving tips. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34
Increasing fuel economy. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-36
Intelligent 4WD (if so equipped). . . . . . . . . . . . . . . . . . . . 5-36
4x4–i system operation . . . . . . . . . . . . . . . . . . . . . . . . 5-36
Parking/parking on hills. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40
Power steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41
Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41
Brake precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41
Anti-lock Braking System (ABS). . . . . . . . . . . . . . . . . 5-42
Brake assist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-43
Vehicle Dynamic Control (VDC) system . . . . . . . . . . . . . 5-43
Rise-up and build-up . . . . . . . . . . . . . . . . . . . . . . . . . . 5-45
Brake force distribution . . . . . . . . . . . . . . . . . . . . . . . . 5-45
Hill Descent Control System (if so equipped) . . . . . . . . 5-46
Hill start assist system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-47
Rear sonar system (RSS) (if so equipped) . . . . . . . . . . . 5-47
Cold weather driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-48
Freeing a frozen door lock . . . . . . . . . . . . . . . . . . . . . . 5-48
Antifreeze. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-48
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-48
Draining of coolant water . . . . . . . . . . . . . . . . . . . . . . . 5-48
Tire equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-49
Special winter equipment. . . . . . . . . . . . . . . . . . . . . . . 5-49
Driving on snow or ice . . . . . . . . . . . . . . . . . . . . . . . . . 5-49
Engine block heater (if so equipped) . . . . . . . . . . . . . 5-49
PRECAUTIONS WHEN STARTING
AND DRIVING
WARNING
● Do not leave children or adults who
would normally require the assistance
of others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
others through inadvertent operation of
the vehicle. Also, on hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause
severe or possibly fatal injuries to
people or animals.
● Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. Do not place cargo higher than
the seatbacks. In a sudden stop or collision, unsecured cargo could cause
personal injury.
EXHAUST GAS (carbon monoxide)
WARNING
● Do not breathe exhaust gases; they
contain colorless and odorless carbon
monoxide. Carbon monoxide is dangerous. It can cause unconsciousness or
death.
5-2 Starting and driving
● If you suspect that exhaust fumes are
entering the vehicle, drive with all windows fully open, and have the vehicle
inspected immediately.
● Do not run the engine in closed spaces
such as a garage.
● Do not park the vehicle with the engine
running for any extended length of time.
● Keep the rear vent windows, liftgates,
doors and trunk lids (if so equipped)
closed while driving, otherwise exhaust
gases could be drawn into the passenger compartment. If you must drive with
one of these open, follow these
precautions:
1. Open all the windows.
air recirculation but2. Set the
ton to off and the fan control dial to
high to circulate the air.
● If electrical wiring or other cable connections must pass to a trailer through
the seal on the liftgate or the body,
follow the manufacturer’s recommendation to prevent carbon monoxide entry into the vehicle.
● The exhaust system and body should be
inspected by a qualified mechanic
whenever:
a. The vehicle is raised for service.
b. You suspect that exhaust fumes are
entering
into
the
passenger
compartment.
c. You notice a change in the sound of
the exhaust system.
d. You have had an accident involving
damage to the exhaust system, underbody, or rear of the vehicle.
THREE-WAY CATALYST
The three-way catalyst is an emission control
device installed in the exhaust system. Exhaust
gases in the three-way catalyst are burned at
high temperatures to help reduce pollutants.
WARNING
● The exhaust gas and the exhaust system are very hot. Keep people, animals
or flammable materials away from the
exhaust system components.
● Do not stop or park the vehicle over
flammable materials such as dry grass,
waste paper or rags. They may ignite
and cause a fire.
CAUTION
● Do not use leaded gasoline. Deposits
from leaded gasoline will seriously reduce the three-way catalyst’s ability to
help reduce exhaust pollutants.
● Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or
electrical systems can cause overrich
fuel flow into the three-way catalyst,
causing it to overheat. Do not keep driving if the engine misfires, or if noticeable loss of performance or other unusual
operating
conditions
are
detected. Have the vehicle inspected
promptly by a NISSAN dealer.
● Avoid driving with an extremely low fuel
level. Running out of fuel could cause
the engine to misfire, damaging the
three-way catalyst.
● Do not race the engine while warming it
up.
● Do not push or tow your vehicle to start
the engine.
TIRE PRESSURE MONITORING
SYSTEM (TPMS)
Each tire, including the spare (if provided),
should be checked monthly when cold and inflated to the inflation pressure recommended by
the vehicle manufacturer on the vehicle placard
or tire inflation pressure label. (If your vehicle has
tires of a different size than the size indicated on
the vehicle placard or tire inflation pressure label,
you should determine the proper tire inflation
pressure for those tires.)
As an added safety feature, your vehicle has been
equipped with a Tire Pressure Monitoring System
(TPMS) that illuminates a low tire pressure telltale
when one or more of your tires is significantly
under-inflated. Accordingly, when the low tire
pressure telltale illuminates, you should stop and
check all four tires as soon as possible, and
inflate them to the proper pressure. Driving on a
significantly under-inflated tire causes the tire to
overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread
life, and may affect the vehicle’s handling and
stopping ability.
Please note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver’s
responsibility to maintain correct tire pressure,
even if under-inflation has not reached the level to
trigger illumination of the TPMS low tire pressure
telltale.
Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when the
system is not operating properly. The TPMS malfunction indicator is combined with the low tire
pressure telltale. When the system detects a
malfunction, the telltale will flash for approximately one minute and then remain continuously
illuminated. This sequence will continue upon
subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is
illuminated, the system may not be able to detect
or signal low tire pressure as intended. TPMS
malfunctions may occur for a variety of reasons,
including the installation of replacement or alternate tires or wheels on the vehicle that prevent
the TPMS from functioning properly. Always
check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to
ensure that the replacement or alternate tires and
wheels allow the TPMS to continue to function
properly.
Additional information:
● The TPMS does not monitor the tire
pressure of the spare tire.
Starting and driving 5-3
● The TPMS will activate only when the vehicle
is driven at speeds above 16 MPH
(25 km/h). Also, this system may not detect a
sudden drop in tire pressure (for example a
flat tire while driving).
● The low tire pressure warning light does not
automatically turn off when the tire pressure
is adjusted. After the tire is inflated to the
recommended pressure, the vehicle must be
driven at speeds above 16 MPH (25 km/h)
to activate the TPMS and turn off the low tire
pressure warning light. Use a tire pressure
gauge to check the tire pressure.
● The “Tire Pressure Low - Add Air” warning
appears in the vehicle information display
when the low tire pressure warning light is
illuminated and low tire pressure is detected.
The “Tire Pressure Low - Add Air” warning
turns off when the low tire pressure warning
light turns off.
● The “Tire Pressure Low - Add Air” warning
does not appear if the low tire pressure
warning light illuminates to indicate a TPMS
malfunction.
5-4 Starting and driving
● Tire pressure rises and falls depending on
the heat caused by the vehicle’s operation
and the outside temperature. Low outside
temperature can lower the temperature of
the air inside the tire which can cause a
lower tire inflation pressure. This may cause
the low tire pressure warning light to illuminate. If the warning light illuminates, check
the tire pressure for all four tires.
● The Tire and Loading Information label (also
referred to as the vehicle placard or tire
inflation pressure label) is located in the
driver’s door opening.
● You can also check the pressure of all tires
(except the spare tire) on the vehicle information display screen. The order of the tire
pressure figures displayed on the screen
corresponds with the actual order of the tire
position.
For additional information, refer to “Low tire pressure warning light” in the “Instruments and controls” section and “Tire Pressure Monitoring System (TPMS)” in the “In case of emergency”
section.
WARNING
● Radio waves could adversely affect
electric medical equipment. Those who
use a pacemaker should contact the
electric medical equipment manufacturer for the possible influences before
use.
● If the low tire pressure warning light
illuminates while driving, avoid sudden
steering maneuvers or abrupt braking,
reduce vehicle speed, pull off the road
to a safe location and stop the vehicle
as soon as possible. Driving with underinflated tires may permanently damage
the tires and increase the likelihood of
tire failure. Serious vehicle damage
could occur and may lead to an accident
and could result in serious personal injury. Check the tire pressure for all four
tires. Adjust the tire pressure to the
recommended COLD tire pressure
shown on the Tire and Loading Information label to turn the low tire pressure
warning light OFF. If you have a flat tire,
replace it with a spare tire as soon as
possible. (For additional information,
refer to “Flat tire” in the “In case of
emergency” section for changing a flat
tire.)
● When a spare tire is mounted or a wheel
is replaced, tire pressure will not be
indicated, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.
Contact your NISSAN dealer as soon as
possible for tire replacement and/or
system resetting.
● Replacing tires with those not originally
specified by NISSAN could affect the
proper operation of the TPMS.
● Do not inject any tire liquid or aerosol
tire sealant into the tires, as this may
cause a malfunction of the tire pressure
sensors.
CAUTION
● The TPMS may not function properly
when the wheels are equipped with tire
chains or the wheels are buried in snow.
● Do not place metalized film or any
metal parts (antenna, etc.) on the windows. This may cause poor reception of
the signals from the tire pressure sensors, and the TPMS will not function
properly.
Some devices and transmitters may temporarily
interfere with the operation of the TPMS and
cause the low tire pressure warning light to illuminate.
Some examples are:
– Facilities or electric devices using similar radio
frequencies are near the vehicle.
NOTE:
Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For Canada:
FCC Notice:
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that
may cause undesired operation of the device.
For USA:
TPMS with Easy Fill Tire Alert
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
When adding air to an under-inflated tire, the
TPMS with Easy Fill Tire Alert provides visual and
audible signals outside the vehicle to help you
inflate the tires to the recommended COLD tire
pressure.
– If a transmitter set to similar frequencies is
being used in or near the vehicle.
– If a computer (or similar equipment) or a
DC/AC converter is being used in or near the
vehicle.
Vehicle set-up
1. Park the vehicle in a safe and level place.
2. Apply the parking brake and place the shift
lever to the P (Park) position.
3. Place the ignition switch to the ON position.
Do not start the engine.
Starting and driving 5-5
Operation
1. Add air to the tire.
2. After a few seconds, the hazard indicators
will start flashing.
3. When the designated pressure is reached,
the horn beeps once and the hazard indicators stop flashing.
4. Perform the above steps for each tire.
● If the tire is over-inflated more than approximately 4 psi (30 kPa), the horn
beeps and the hazard indicators flash
three times. To correct the pressure, push
the core of the valve stem on the tire
briefly to release pressure. When the
pressure reaches the designated pressure, the horn beeps once.
● If the hazard indicator does not flash
within approximately 15 seconds after
starting to inflate the tire, it indicates that
the Easy Fill Tire Alert is not operating.
● The TPMS will not activate the Easy Fill
Tire Alert under the following conditions:
– If there is interference from an external
device or transmitter.
– The air pressure from the inflation device
is not sufficient to inflate the tire.
5-6 Starting and driving
– There is a malfunction in the TPMS system.
– There is a malfunction in the horn or hazard indicators.
– The identification code of the tires pressure sensor is not registered to the system.
– The battery of the tire pressure sensor is
low.
● If the Easy Fill Tire Alert does not operate
due to TPMS interference, move the vehicle about 3 ft (1 m) backward or forward
and try again.
If the Easy Fill Tire Alert is not working, use a tire
pressure gauge.
ON-PAVEMENT AND OFF-ROAD
DRIVING PRECAUTIONS
Utility vehicles have a significantly higher
rollover rate than other types of vehicles.
They have higher ground clearance than passenger cars to make them capable of performing in a
variety of on-pavement and off-road applications.
This gives them a higher center of gravity than
ordinary vehicles. An advantage of higher ground
clearance is a better view of the road, allowing
you to anticipate problems. However, they are not
designed for cornering at the same speeds as
conventional 2-wheel drive vehicles any more
than low-slung sports cars are designed to perform satisfactorily under off-road conditions. If at
all possible, avoid sharp turns at high speeds. As
with other vehicles of this type, failure to operate
this vehicle correctly may result in loss of control
or vehicle rollover. In a rollover crash, an unbelted
person is significantly more likely to die than a
person wearing a seat belt.
For additional information, refer to “Driving safety
precautions” in this section.
AVOIDING COLLISION AND
ROLLOVER
WARNING
Failure to operate this vehicle in a safe
and prudent manner may result in loss of
control or an accident.
Be alert and drive defensively at all times. Obey
all traffic regulations. Avoid excessive speed,
high speed cornering, or sudden steering maneuvers, because these driving practices could
cause you to lose control of your vehicle.
As with any vehicle, loss of control could
result in a collision with other vehicles or
objects or cause the vehicle to roll over,
particularly if the loss of control causes the
vehicle to slide sideways.
Be attentive at all times, and avoid driving when
tired. Never drive when under the influence of
alcohol or drugs (including prescription or overthe-counter drugs which may cause drowsiness). Always wear your seat belt as outlined in
the “Safety – Seats, seat belts and supplemental
restraint system” section of this manual, and also
instruct your passengers to do so.
Seat belts help reduce the risk of injury in collisions and rollovers. In a rollover crash, an
unbelted or improperly belted person is
significantly more likely to be injured or
killed than a person properly wearing a
seat belt.
OFF-ROAD RECOVERY
While driving, the right side or left side wheels
may unintentionally leave the road surface. If this
occurs, maintain control of the vehicle by following the procedure below. Please note that this
procedure is only a general guide. The vehicle
must be driven as appropriate based on the conditions of the vehicle, road and traffic.
1. Remain calm and do not overreact.
2. Do not apply the brakes.
3. Maintain a firm grip on the steering wheel
with both hands and try to hold a straight
course.
4. When appropriate, slowly release the accelerator pedal to gradually slow the vehicle.
5. If there is nothing in the way, steer the vehicle to follow the road while vehicle speed
is reduced. Do not attempt to drive the vehicle back onto the road surface until vehicle
speed is reduced.
6. When it is safe to do so, gradually turn the
steering wheel until both tires return to the
road surface. When all tires are on the road
surface, steer the vehicle to stay in the appropriate driving lane.
● If you decide that it is not safe to return the
vehicle to the road surface based on vehicle,
road or traffic conditions, gradually slow the
vehicle to a stop in a safe place off the road.
RAPID AIR PRESSURE LOSS
Rapid air pressure loss or a “blow-out” can occur
if the tire is punctured or is damaged due to
hitting a curb or pothole. Rapid air pressure loss
can also be caused by driving on under-inflated
tires.
Rapid air pressure loss can affect the handling
and stability of the vehicle, especially at highway
speeds.
Help prevent rapid air pressure loss by maintaining the correct air pressure and visually inspect
the tires for wear and damage. For additional
information, refer to “Wheels and tires” in the
“Maintenance and do-it-yourself” section of this
manual. If a tire rapidly loses air pressure or
“blows-out” while driving, maintain control of the
vehicle by following the procedure below. Please
note that this procedure is only a general guide.
The vehicle must be driven as appropriate based
on the conditions of the vehicle, road and traffic.
WARNING
The following actions can increase the
chance of losing control of the vehicle if
there is a sudden loss of tire air pressure.
Losing control of the vehicle may cause a
collision and result in personal injury.
● The vehicle generally moves or pulls in
the direction of the flat tire.
● Do not rapidly apply the brakes.
● Do not rapidly release the accelerator
pedal.
● Do not rapidly turn the steering wheel.
1. Remain calm and do not overreact.
2. Maintain a firm grip on the steering wheel
with both hands and try to hold a straight
course.
Starting and driving 5-7
3. When appropriate, slowly release the accelerator pedal to gradually slow the vehicle.
4. Gradually steer the vehicle to a safe location
off the road and away from traffic if possible.
5. Lightly apply the brake pedal to gradually
stop the vehicle.
6. Turn on the hazard warning flashers and
contact a roadside emergency service to
change the tire. For additional information,
refer to “Changing a flat tire” in the “In case
of emergency” section of this manual.
DRINKING ALCOHOL/DRUGS AND
DRIVING
WARNING
Never drive under the influence of alcohol
or drugs. Alcohol in the bloodstream reduces coordination, delays reaction time
and impairs judgement. Driving after
drinking alcohol increases the likelihood
of being involved in an accident injuring
yourself and others. Additionally, if you
are injured in an accident, alcohol can
increase the severity of the injury.
5-8 Starting and driving
NISSAN is committed to safe driving. However,
you must choose not to drive under the influence
of alcohol. Every year thousands of people are
injured or killed in alcohol-related collisions. Although the local laws vary on what is considered
to be legally intoxicated, the fact is that alcohol
affects all people differently and most people
underestimate the effects of alcohol.
Remember, drinking and driving don’t mix! That is
true for drugs (over-the-counter, prescription)
and illegal drugs too. Don’t drive if your ability to
operate your vehicle is impaired by alcohol,
drugs, or some other physical condition.
DRIVING SAFETY PRECAUTIONS
Your NISSAN is designed for both normal and
off-road use. However, avoid driving in deep water or mud as your NISSAN is mainly designed for
leisure use, unlike a conventional off-road vehicle.
Remember that 2-wheel drive models are less
capable than 4-wheel drive models for rough
road driving and extrication when stuck in deep
snow or mud, or the like.
Please observe the following precautions:
WARNING
● Spinning the front wheels on slippery
surface may cause the 4WD warning
message to display and the 4WD system to automatically switch from the
4WD to the 2WD mode. This could reduce the traction. Be especially careful
when towing a trailer. (4WD models)
● Drive carefully when off the road and
avoid dangerous areas. Every person
who drives or rides in this vehicle
should be seated with their seat belt
fastened. This will keep you and your
passengers in position when driving
over rough terrain.
● Do not drive across steep slopes. Instead drive either straight up or straight
down the slopes. Off-road vehicles can
tip over sideways much more easily
than they can forward or backward.
● Many hills are too steep for any vehicle.
If you drive up them, you may stall. If
you drive down them, you may not be
able to control your speed. If you drive
across them, you may roll over.
● Do not shift gears while driving on
downhill grades as this could cause
loss of control of the vehicle.
● Stay alert when driving to the top of a
hill. At the top there could be a drop-off
or other hazard that could cause an
accident.
● If your engine stalls or you cannot make
it to the top of a steep hill, never attempt to turn around. Your vehicle could
tip or roll over. Always back straight
down in R (Reverse) gear and apply
brakes to control your speed.
● Heavy braking going down a hill could
cause your brakes to overheat and fade,
resulting in loss of control and an accident. Apply brakes lightly and use a low
gear to control your speed.
● Unsecured cargo can be thrown around
when driving over rough terrain. Properly secure all cargo so it will not be
thrown forward and cause injury to you
or your passengers.
● Secure heavy loads in the cargo area as
far forward and as low as possible. Do
not equip the vehicle with tires larger
than specified in this manual. This could
cause your vehicle to roll over.
● Do not grip the inside or spokes of the
steering wheel when driving off-road.
The steering wheel could move suddenly and injure your hands. Instead
drive with your fingers and thumbs on
the outside of the rim.
● Before operating the vehicle, ensure
that the driver and all passengers have
their seat belts fastened.
● Always drive with the floor mats in place
as the floor may become hot.
● Lower your speed when encountering
strong crosswinds. With a higher center
of gravity, your NISSAN is more affected
by strong side winds. Slower speeds
ensure better vehicle control.
● Do not attempt to test a 4WD equipped
vehicle on a 2-wheel dynamometer
(such as the dynamometers used by
some states for emissions testing), or
similar equipment even if the other 2
wheels are raised off the ground. Make
sure you inform test facility personnel
that your vehicle is equipped with 4WD
before it is placed on a dynamometer.
Using the wrong test equipment may
result in drivetrain damage or unexpected vehicle movement which could
result in serious vehicle damage or personal injury.
● When a wheel is off the ground due to
an unlevel surface, do not spin the
wheel excessively.
● Do not drive beyond the performance
capability of the tires, even with 4WD
engaged.
● Accelerating quickly, sharp steering
maneuvers or sudden braking may
cause loss of control.
● For 4WD equipped vehicles, do not attempt to raise 2 wheels off the ground
and shift the transmission to any drive
or reverse position with the engine running. Doing so may result in drivetrain
damage or unexpected vehicle movement which could result in serious vehicle damage or personal injury.
● If at all possible, avoid sharp turning
maneuvers, particularly at high speeds.
Your NISSAN vehicle has a higher center of gravity than a passenger car. The
vehicle is not designed for cornering at
the same speeds as passenger cars.
Starting and driving 5-9
PUSH-BUTTON IGNITION SWITCH
● Failure to operate this vehicle correctly
could result in loss of control and/or a
rollover accident.
● Always use tires of the same type, size,
brand, construction (bias, bias-belted,
or radial), and tread pattern on all 4
wheels. Install tire chains on the front
wheels when driving on slippery roads
and drive carefully.
● Be sure to check the brakes immediately after driving in mud or water. For
additional information, refer to “Brake
system” in this section for “Wet
brakes”.
● Avoid parking your vehicle on steep
hills. If you get out of the vehicle and it
rolls forward, backward or sideways,
you could be injured.
● Whenever you drive off-road through
sand, mud or water as deep as the
wheel hub, more frequent maintenance
may be required. For additional information, refer to “Periodic maintenance”
in the “NISSAN Service and Maintenance Guide.”
5-10 Starting and driving
WARNING
Do not operate the push-button ignition
switch while driving the vehicle except in
an emergency. (The engine will stop when
the ignition switch is pushed three consecutive times in quick succession or the
ignition switch is pushed and held for
more than 2 seconds.) If the engine stops
while the vehicle is being driven, this
could lead to a crash and serious injury.
LSD2014
When the ignition switch is pushed without depressing the brake pedal, the ignition switch will
illuminate.
Push the ignition switch center:
● Once to change to ACC.
● Two times to change to ON.
● Three times to return to OFF.
The ignition switch will automatically return to the
LOCK position when any door is either opened or
closed with the switch in the OFF position.
The ignition lock is designed so that the ignition
switch position cannot be switched to OFF until
the shift lever is moved to the P (Park) position.
The operating range of the engine start function
1 .
is inside of the vehicle 䊊
● The luggage area is not included in the operating range, but the Intelligent Key may
function.
When the ignition switch cannot be pushed toward the OFF position, proceed as follows:
● If the Intelligent Key is placed on the instrument panel, inside the glove box, storage bin
or door pocket, the Intelligent Key may not
function.
1. Move the shift lever into the P (Park) position.
2. Push the ignition switch. The ignition switch
position will change to the ON position.
● If the Intelligent Key is placed near the door
or window outside the vehicle, the Intelligent
Key may function.
3. Push the ignition switch again to the OFF
position.
The shift lever can be moved from the P
(Park) position if the ignition switch is in
the ON position and the brake pedal is
depressed.
If the battery of the vehicle is discharged,
the push-button ignition switch cannot be
moved from the LOCK position.
Some indicators and warnings for operation are
displayed on the vehicle information display. For
additional information, refer to “Vehicle information display” in the “Instruments and controls”
section of this manual.
LSD2020
OPERATING RANGE
PUSH-BUTTON IGNITION SWITCH
POSITIONS
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
operating range.
LOCK (Normal parking position)
When the Intelligent Key battery is almost discharged or strong radio waves are present near
the operating location, the Intelligent Key system’s operating range becomes narrower and
may not function properly.
The ignition switch will be unlocked when it is
pushed to the ACC position while carrying the
Intelligent Key.
The ignition switch can only be locked in this
position.
The ignition switch will lock when any door is
opened or closed with the ignition switched off.
If the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does
not carry the Intelligent Key, to push the ignition
switch to start the engine.
Starting and driving 5-11
ACC (Accessories)
This position activates electrical accessories,
such as the radio, when the engine is not running.
ACC has a battery saver feature that will turn the
ignition switch to the OFF position after a period
of time under the following conditions:
● All doors are closed.
The battery saver feature will be cancelled if any
of the following occur:
● Any door is opened.
● Shift lever is moved out of the P (Park)
position.
● Ignition switch changes position.
CAUTION
● Shift lever is in P (Park).
● Any door is opened.
Do not leave the vehicle with the ignition
switch in ACC or ON positions when the
engine is not running for an extended period. This can discharge the battery.
● Shift lever is moved out of P (Park).
OFF
● Ignition switch changes position.
ON (Normal operating position)
The ignition switch is in the OFF position when
the engine is turned off using the ignition switch.
No lights will illuminate on the ignition switch.
This position turns on the ignition system and
electrical accessories.
EMERGENCY ENGINE SHUT OFF
The battery saver feature will be cancelled if any
of the following occur:
ON has a battery saver feature that will turn the
ignition switch to the OFF position, if the vehicle
is not running, after some time under the following conditions:
● All doors are closed.
● Shift lever is in P (Park).
5-12 Starting and driving
To shut off the engine in an emergency situation
while driving, perform the following procedure:
– Rapidly push the push-button ignition switch
three consecutive times in less than 1.5 seconds, or
– Push and hold the push-button ignition switch
for more than 2 seconds.
SSD0860
NISSAN INTELLIGENT KEY®
BATTERY DISCHARGE
If the battery of the NISSAN Intelligent Key® is
discharged, or environmental conditions interfere
with the Intelligent Key operation, start the engine
according to the following procedure:
1. Place the shift lever in the P (Park) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent
Key as illustrated. (A chime will sound.)
BEFORE STARTING THE ENGINE
After Step 3 is performed, when the ignition
switch is pushed without depressing the
brake pedal, the ignition switch position will
change to ACC.
4. Push the ignition switch while depressing
the brake pedal within ten seconds after the
chime sounds. The engine will start.
NOTE:
● When the ignition switch is pushed to the
ACC or ON position or the engine is started
by the above procedure, the Intelligent Key
battery discharge indicator appears in the
vehicle information display even when the
Intelligent Key is inside the vehicle. This is
not a malfunction. To turn off the Intelligent
Key battery discharge indicator, touch the
ignition switch with the Intelligent Key again.
● If the Intelligent Key battery discharge indicator appears, replace the battery as soon
as possible. For additional information, refer
to “Battery Replacement” in the “Maintenance and do-it-yourself” section of this
manual.
NISSAN VEHICLE IMMOBILIZER
SYSTEM
● Make sure the area around the vehicle is
clear.
The NISSAN Vehicle Immobilizer System will not
allow the engine to start without the use of the
registered key.
● Check fluid levels such as engine oil, coolant, brake fluid, and windshield-washer fluid
as frequently as possible, or at least whenever you refuel.
If the engine fails to start using a registered key
(for example, when interference is caused by
another registered key, an automated toll road
device or automatic payment device on the key
ring), restart the engine using the following procedure:
1. Leave the ignition switch in the ON position
for approximately 5 seconds.
2. Place the ignition switch in the OFF or
LOCK position, and wait approximately
10 seconds.
3. Repeat Steps 1 and 2.
4. Restart the engine while holding the device
(which may have caused the interference)
separate from the registered key.
If the no start condition re-occurs, NISSAN recommends placing the registered key on a separate key ring to avoid interference from other
devices.
● Check that all windows and lights are clean.
● Visually inspect tires for their appearance
and condition. Also check tires for proper
inflation.
● Check that all doors are closed.
● Position
seat
and
restraints/headrests.
adjust
head
● Adjust inside and outside mirrors.
● Fasten seat belts and ask all passengers to
do likewise.
● Check the operation of warning lights when
the ignition switch is placed in the ON position. For additional information, refer to
“Warning/indicator lights and audible reminders” in the “Instruments and controls”
section of this manual.
Starting and driving 5-13
STARTING THE ENGINE
1. Apply the parking brake.
2. Move the shift lever to P (Park) or N (Neutral). P (Park) is recommended.
The starter is designed not to operate if
the shift lever is in any of the driving
positions.
3. Push the ignition switch to the ON position.
Depress the brake pedal and push the ignition switch to start the engine.
To start the engine immediately, push and
release the ignition switch while depressing
the brake pedal with the ignition switch in
any position.
● If the engine is very hard to start in extremely cold weather or when restarting,
depress the accelerator pedal a little (approximately 1/3 to the floor) and while
holding, crank the engine. Release the
accelerator pedal when the engine starts.
● If the engine is very hard to start because
it is flooded, depress the accelerator
pedal all the way to the floor and hold it.
Push the ignition switch to the ON position to start cranking the engine. After 5 or
6 seconds, stop cranking by pushing the
ignition switch to LOCK. After cranking
the engine, release the accelerator pedal.
Crank the engine with your foot off the
5-14 Starting and driving
accelerator pedal by depressing the
brake pedal and pushing the push-button
ignition switch to start the engine. If the
engine starts, but fails to run, repeat the
above procedure.
CAUTION
Do not operate the starter for more than
15 seconds at a time. If the engine does
not start, push the ignition switch to the
OFF position and wait 10 seconds before
cranking again, otherwise the starter
could be damaged.
4. Warm-up
Allow the engine to idle for at least 30 seconds after starting. Do not race the engine
while warming it up. Drive at moderate
speed for a short distance first, especially in
cold weather. In cold weather, keep the engine running for a minimum of 2 - 3 minutes
before shutting it off. Starting and stopping
the engine over a short period of time may
make the vehicle more difficult to start.
5. To stop the engine, shift the shift lever to the
P (Park) position and push the ignition
switch to the OFF position.
NOTE:
Care should be taken to avoid situations
that can lead to potential battery discharge
and potential no-start conditions such as:
1. Installation or extended use of electronic
accessories that consume battery power
when the engine is not running (Phone chargers, GPS, DVD players, etc.)
2. Vehicle is not driven regularly and/or only
driven short distances. In these cases, the
battery may need to be charged to maintain
battery health.
REMOTE START (if so equipped)
Vehicles started with the remote start require the
ignition switch to be placed in the ON position
before the shift lever can be moved from the P
(Park) position. To place the ignition switch to the
ON position, follow these steps:
1. Make sure that the Intelligent Key is on you.
2. Apply the brake.
3. Press the ignition switch once to the ON
position.
For additional information, refer to “NISSAN Intelligent Key®” in the “Pre-driving checks and
adjustments” section of this manual.
DRIVING THE VEHICLE
CONTINUOUSLY VARIABLE
TRANSMISSION (CVT)
The Continuously Variable Transmission (CVT) in
your vehicle is electronically controlled to produce maximum power and smooth operation.
The recommended operating procedures for this
transmission are shown on the following pages.
Follow these procedures for maximum vehicle
performance and driving enjoyment.
Engine power may be automatically reduced to protect the CVT if the engine
speed increases quickly when driving on
slippery roads or while being tested on
some dynamometers.
Starting the vehicle
1. After starting the engine, fully depress the
foot brake pedal before moving the shift
lever out of the P (Park) position.
This CVT is designed so that the foot
brake pedal must be depressed before
shifting from P (Park) to any driving
position while the ignition switch is in
the ON position.
The shift lever cannot be moved out of
the P (Park) position and into any of
the other positions if the ignition
switch is placed in the LOCK, OFF or
ACC position.
2. Keep the foot brake pedal depressed and
move the shift lever to a driving position.
3. Release the parking brake and foot brake
pedal, and then gradually start the vehicle in
motion.
WARNING
● Do not depress the accelerator pedal
while shifting from P (Park) or N (Neutral) to R (Reverse), D (Drive) or L (Low)
position. Always depress the brake
pedal until shifting is completed. Failure to do so could cause you to lose
control and have an accident.
CAUTION
● When stopping the vehicle on an uphill
grade, do not hold the vehicle by depressing the accelerator pedal. The foot
brake should be used for this purpose.
● Do not downshift abruptly on slippery
roads. This may cause a loss of control.
● Except in an emergency, do not shift to
the N (Neutral) position while driving.
Coasting with the transmission in the N
(Neutral) position may cause serious
damage to the transmission.
● Cold engine idle speed is high, so use
caution when shifting into a forward or
reverse gear before the engine has
warmed up.
● Never shift to P (Park) or R (Reverse)
while vehicle is moving. Failure to do so
could cause you to lose control and
have an accident.
Starting and driving 5-15
WARNING
Apply the parking brake if the shift lever is
in any position while the engine is not
running. Failure to do so could cause the
vehicle to move unexpectedly or roll away
and result in serious personal injury or
property damage.
CAUTION
Use the P (Park) or R (Reverse) position
only when the vehicle is completely
stopped.
LSD2127
Shifting
A while depressing the
Press the button 䊊
brake pedal
A to shift
Press the button 䊊
Shift without pressing 䊊 button
A
After starting the engine, fully depress the brake
pedal, push and press the shift lever button and
move the shift lever from the P (Park) position to
any of the desired shift positions.
5-16 Starting and driving
P (Park)
R (Reverse)
CAUTION
To prevent transmission damage, use the
R (Reverse) position only when the vehicle
is completely stopped.
Use the R (Reverse) position to back up. Make
sure the vehicle is completely stopped before
selecting the R (Reverse) position. The brake
pedal must be depressed and the shift lever
button pushed in to move the shift lever
from P (Park), N (Neutral) or any drive position to R (Reverse).
N (Neutral)
CAUTION
To prevent transmission damage, use the
P (Park) position only when the vehicle is
completely stopped
Use the P (Park) shift lever position when the
vehicle is parked or when starting the engine.
Make sure the vehicle is completely stopped.
The brake pedal must be depressed and
the shift lever button pushed in to move the
shift lever from N (Neutral) or any drive
position to P (Park). Apply the parking brake.
When parking on a hill, apply the parking brake
first, then move the shift lever into the P (Park)
position.
Neither forward nor reverse gear is engaged. The
engine can be started in this position. You may
shift to N (Neutral) and restart a stalled engine
while the vehicle is moving.
D (Drive)
Use this position for all normal forward driving.
L (Low)
Use this position for engine braking on steep
downhill gradients/climbing steep slopes and
whenever approaching sharp bends. Do not use
the L (Low) position in any other circumstances.
C and move the
5. Press the shift lever button 䊊
D
shift lever to the N (Neutral) position 䊊
while holding down the shift lock release.
The vehicle may be moved to the desired
location. Replace the removed shift lock release cover after the operation. If the shift
lever cannot be moved out of the P (Park)
position, have a NISSAN dealer check the
CVT system as soon as possible.
WARNING
LSD2128
Shift lock release
If the battery charge is low or discharged, the
shift lever may not be moved from the P (Park)
position even with the brake pedal depressed
and the shift lever button pushed. To move the
shift lever, perform the following procedure:
1. Place the ignition switch in the OFF or
LOCK position.
2. Apply the parking brake.
A us3. Remove the shift lock release cover 䊊
ing a suitable tool.
B using a
4. Push down the shift lock release 䊊
suitable tool.
If the shift lever cannot be moved from the
P (Park) position while the engine is running and the brake pedal is depressed, the
stop lights may not work. Malfunctioning
stop lights could cause an accident injuring yourself and others.
LSD2246
Overdrive (O/D) OFF switch
When the O/D OFF switch is pushed with the
shift lever in the D (Drive) position, the
light in the instrument panel illuminates. For additional information, refer to “Overdrive OFF indicator light” in the “Instruments and controls” section
of this manual.
Use the Overdrive off mode when you need improved engine braking.
To turn off the Overdrive off mode, push the O/D
indicator light will
OFF switch again. The
turn off.
Starting and driving 5-17
PARKING BRAKE
Each time the engine is started, or when the shift
lever is shifted to any position other than D
(Drive), the Overdrive off mode will be automatically turned off.
Accelerator downshift
— in D (Drive) position —
For passing or hill climbing, depress the accelerator pedal to the floor. This shifts the transmission down into a lower gear, depending on the
vehicle speed.
High fluid temperature protection
mode
This transmission has a high fluid temperature
protection mode. If the fluid temperature becomes too high (for example, when climbing
steep grades in high temperatures with heavy
loads, such as when towing a trailer), engine
power and, under some conditions, vehicle
speed will be decreased automatically to reduce
the chance of transmission damage. Vehicle
speed can be controlled with the accelerator
pedal, but the engine and vehicle speed may be
limited.
Fail-safe
If the vehicle is driven under extreme conditions, such as excessive wheel spinning
and subsequent hard braking, the fail-safe
5-18 Starting and driving
system may be activated. The MIL may
come on to indicate the fail-safe mode is
activated. For additional information, refer
to “Malfunction Indicator Light (MIL)” in the
“Instrument and controls” section of this
manual. This will occur even if all electrical
circuits are functioning properly. In this
case, place the ignition switch in the OFF
position and wait for 10 seconds. Then
push the switch back to the ON position.
The vehicle should return to its normal operating condition. If it does not return to its
normal operating condition, have a
NISSAN dealer check the transmission and
repair if necessary.
WARNING
When the high fluid temperature protection mode or fail-safe operation occurs,
vehicle speed may be gradually reduced.
The reduced speed may be lower than
other traffic, which could increase the
chance of a collision. Be especially careful
when driving. If necessary, pull to the side
of the road at a safe place and allow the
transmission to return to normal operation, or have it repaired if necessary.
WARNING
● Be sure the parking brake is fully released before driving. Failure to do so
can cause brake failure and lead to an
accident.
● Do not release the parking brake from
outside the vehicle.
● Do not use the shift lever in place of the
parking brake. When parking, be sure
the parking brake is fully engaged.
● Do not leave children unattended in a
vehicle. They could release the parking
brake and cause an accident.
BLIND SPOT WARNING (BSW)
SYSTEM (if so equipped)
● Blind Spot Warning (BSW) system
WARNING
● The BSW system is not a replacement
for proper driving procedure and is not
designed to prevent contact with vehicles or objects. When changing lanes,
always use the side and rear mirrors
and turn and look in the direction you
will move to ensure it is safe to change
lanes. Never rely solely on the BSW
system.
LSD0158
To engage: Firmly depress the parking brake.
To release:
1. Firmly apply the foot brake.
2. Move the shift lever to the P (Park) position.
● The BSW system operates above approximately 20 mph (32 km/h).
BLIND SPOT WARNING (BSW)
SYSTEM
LSD2221
1 inThe BSW system uses radar sensors 䊊
stalled near the rear bumper to detect other vehicles in an adjacent lane.
The Blind Spot Warning (BSW) system helps
alert the driver of other vehicles in adjacent lanes
when changing lanes.
3. Firmly depress the parking brake pedal and it
will release.
4. Before driving, be sure the brake warning
light goes out.
Starting and driving 5-19
The brightness of the BSW indicator light is
adjusted automatically depending on the brightness of the ambient light.
A chime sounds if the radar sensors have already
detected vehicles when the driver activates the
turn signal. If a vehicle comes into the detection
zone after the driver activates the turn signal, then
only the BSW indicator light flashes and no
chime sounds. For additional information, refer to
“BSW driving situations” in this section.
SSD1030
Detection zone
The radar sensors can detect vehicles on either
side of your vehicle within the detection zone
shown as illustrated. This detection zone starts
from the outside mirror of your vehicle and extends approximately 10 ft (3.0 m) behind the rear
bumper, and approximately 10 ft (3.0 m) sideways.
The BSW system operates above approximately
20 MPH (32 km/h). If the radar sensors detect
vehicles in the detection zone, the Blind Spot
Warning indicator light illuminates. If the driver
then activates the turn signal, a chime will sound
twice and the Blind Spot Warning indicator light
will flash.
5-20 Starting and driving
LSD2053
BSW indicator light
BSW SYSTEM OPERATION
If the radar sensors detect a vehicle in the detection zone, the Blind Spot Warning (BSW) indicator light located by the outside mirrors illuminates. If the turn signal is then activated, the
system chimes (twice) and the BSW indicator
light flashes. The BSW indicator light continues
to flash until the detected vehicles leave the
detection zone.
The BSW indicator light illuminates for a few
seconds when the ignition switch is placed in the
ON position.
The BSW system automatically turns on every
time the engine is started, as long as it is activated using the settings menu on the vehicle
information display.
2. Select “Driver Aids”, and press the ENTER
button.
3. To set the BSW/RCTA system to on or off,
buttons to navigate in the
use the
menu and use the ENTER button to select or
change an item:
● Select “Blind Spot” and press the ENTER
button.
– To turn on the warning, use the ENTER
button to check box for “BSW/RCTA system”
LSD2208
When the BSW and Rear Cross Traffic Alert
(RCTA) system switch is turned off, the indicator
1 on the switch is off. The indicator will also be
䊊
off if the BSW/RCTA is deactivated.
How to enable/disable the BSW
system
Perform the following steps to enable or disable
the BSW system.
button until “Settings” dis1. Press the
plays in the vehicle information display. Use
button to select “Driver Assisthe
tance”. Then press the ENTER button.
LSD2247
Temporarily not available
When radar blockage is detected, the system will
be deactivated automatically. The “Side Radar
Obstruction” warning message will appear and
the Blind spot indicator (in the meter display) will
A in the vehicle information display. The
blink 䊊
Blind Spot Warning and Rear Cross Traffic Alert
switch indicator will also blink.
The systems are not available until the conditions
no longer exist.
The radar sensors may be blocked by temporary
ambient conditions such as splashing water, mist
or fog. The blocked condition may also be caused
by objects such as ice, frost or dirt obstructing
the radar sensors.
Starting and driving 5-21
Action to take:
When the above conditions no longer exist, the
system will resume automatically.
Malfunction
When the system malfunctions, it will turn off
automatically. The system malfunction warning
message with the blind spot indicator (orange)
will appear in the vehicle information display. If
the BSW system fails, the RCTA system will also
fail.
Action to take:
Stop the vehicle in a safe location, place the
vehicle in the P (Park) position, turn the engine off
and restart the engine. If the message continues
to appear, have the system checked by a
NISSAN dealer.
BSW SYSTEM PRECAUTIONS
WARNING
● The radar sensors may not be able to
detect and activate BSW when certain
objects are present such as:
– Pedestrians, bicycles, or animals.
– Vehicles such as motorcycles, low
height vehicles, or high ground clearance vehicles.
5-22 Starting and driving
– Oncoming vehicles.
– Vehicles remaining in the detection
zone when you accelerate from a
stop. For additional information, refer to “BSW driving situations” in this
section.
– A vehicle merging into an adjacent
lane at a speed approximately the
same as your vehicle. For additional
information, refer to “BSW driving
situations” in this section.
– A vehicle approaching rapidly from
behind. For additional information,
refer to “BSW driving situations” in
this section.
– A vehicle which your vehicle overtakes rapidly. For additional information, refer to “BSW driving situations” in this section.
– A vehicle that passes through the detection zone quickly.
● The radar sensors detection zone is designed based on a standard lane width.
When driving in a wider lane, the radar
sensors may not detect vehicles in an
adjacent lane. When driving in a narrow
lane, the radar sensors may detect vehicles driving two lanes away.
● The radar sensors are designed to ignore most stationary objects, however
objects such as guardrails, walls, foliage and parked vehicles may occasionally be detected. The system malfunction warning message with the blind
spot indicator (orange) will appear in
the vehicle information display. This is a
normal driving condition.
● Severe weather or road spray conditions may reduce the ability of the radar
to detect other vehicles.
● Excessive noise (e.g. audio system volume, open vehicle window) will interfere with the chime sound, and it may
not be heard.
SSD1026
Illustration 1 – Approaching from behind
BSW DRIVING SITUATIONS
Another vehicle approaching from
behind
Illustration 1: The Blind Spot Warning indicator
light illuminates if a vehicle enters the detection
zone from behind in an adjacent lane.
However, if the overtaking vehicle is traveling much
faster than your vehicle, the indicator light may not
illuminate before the detected vehicle is beside
your vehicle. Always use the side and rear mirrors
and turn and look in the direction your vehicle will
move to ensure it is safe to change lanes.
SSD1031
Illustration 2 – Approaching from behind
Illustration 2: If the driver activates the turn
signal then the system chimes a sound (twice)
and the Blind Spot Warning indicator light
flashes.
SSD1032
Illustration 3 – Accelerate from a stop
NOTE:
Illustration 3: If you accelerate from a stop
with a vehicle in the detection zone, the
other vehicle may not be detected.
NOTE:
If the driver activates the turn signal before
a vehicle enters the detection zone, the
Blind Spot Warning indicator light will flash
but no chime will sound when the other
vehicle is detected.
Starting and driving 5-23
SSD1033
Illustration 4 – Overtaking another vehicle
Overtaking another vehicle
Illustration 4: The Blind Spot Warning indicator
light illuminates if you overtake a vehicle and that
vehicle stays in the detection zone for approximately 2 seconds.
The radar sensors may not detect slower moving
vehicles if they are passed quickly.
5-24 Starting and driving
SSD1034
Illustration 5 – Overtaking another vehicle
Illustration 5: If the driver activates the turn
signal while another vehicle is in the detection
zone, then the system chimes a sound (twice)
and the Blind Spot Warning indicator light
flashes.
SSD1036
Illustration 6 – Overtaking several vehicles
LSD2050
Illustration 7– Entering from the side
NOTE:
Entering from the side
Illustration 6: When overtaking several vehicles in a row, the vehicles after the first
vehicle may not be detected if they are
traveling close together.
Illustration 7: The Blind Spot Warning indicator
light illuminates if a vehicle enters the detection
zone from either side.
NOTE:
The radar sensors may not detect a vehicle
which is traveling at about the same speed
as your vehicle when it enters the detection
zone.
Starting and driving 5-25
Do not attach stickers (including transparent material), install accessories or apply additional
paint near the radar sensors.
Do not strike or damage the area around the
radar sensors. See a NISSAN dealer if the area
around the radar sensors is damaged due to a
collision.
Radio frequency statement
This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two
conditions:
SSD1038
Illustration 8– Entering from the side
Illustration 8: Illustration 8: If the driver activates the turn signal while another vehicle is in the
detection zone the Blind Spot Warning indicator
light flashes and a chime will sound twice.
NOTE:
If the driver activates the turn signal before
a vehicle enters the detection zone, the
Blind Spot Warning indicator light will flash
but no chime will sound when another vehicle is detected.
LSD2221
RADAR MAINTENANCE
1. This device may not cause harmful interference, and
1 for the BSW system
The two radar sensors 䊊
are located near the rear bumper. Always keep
the area near the radar sensors clean.
2. This device must accept any interference received, including interference
that may cause undesired operation.
The radar sensors may be blocked by temporary
ambient conditions such as splashing water, mist
or fog.
The blocked condition may also be caused by
objects such as ice, frost or dirt obstructing the
radar sensors.
Check for and remove objects obstructing the
area around the radar sensors.
5-26 Starting and driving
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
THE REAR CROSS TRAFFIC ALERT
(RCTA) SYSTEM (if so equipped)
Applicable law: Canada 310
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that
may cause undesired operation of the device.
Frequency
24.25GHz
of
operation:
24.05GHz
—
Output power: less than 20 milliwatts
LSD2217
WARNING
● The RCTA system is not a replacement
for proper driving procedure and is not
designed to prevent contact with vehicles or objects. When backing out of
parking space, always use the side and
rear mirrors and turn and look in the
direction you will move. Never rely
solely on the RCTA system.
LSD2216
RCTA SYSTEM OPERATION
The RCTA systems can help alert the driver of an
approaching vehicle when the driver is backing
out of a parking space.
When the shift position is R (Reverse) and the
vehicle speed is less than approximately 5 MPH
(8 km/h), the RCTA system operates.
1 inThe RCTA system uses radar sensors 䊊
stalled on both sides near the rear bumper to
detect an approaching vehicle.
1 detect an approaching
The radar sensors 䊊
vehicle from up to approximately 66 ft. (20 m)
away.
Starting and driving 5-27
If the radar detects a vehicle approaching from
the side, the system gives visual and audible
warnings
LSD2173
RCTA SYSTEM PRECAUTIONS
5-28 Starting and driving
WARNING
● Always check surroundings and turn to
check what is behind you before backing up. The radar sensors detect approaching (moving) vehicles. The radar
sensors cannot detect every object such
as:
– Pedestrians, bicycles, motorcycles,
animals or child operated toy
vehicles
– Illustration d: When an approaching
vehicle turns into your vehicle’s parking lot aisle.
– Illustration e: When the angle formed
by your vehicle and approaching vehicle is small
● The following conditions may reduce
the ability of the radar to detect other
vehicles:
If the radar detects an approaching vehicle from
the side, the system chimes a sound (single
beep), the Blind Spot Warning indicator light on
the side of the approaching vehicle flashes.
– Severe weather
– A vehicle that is passing at speeds
greater than approximately 19 MPH
(30 km/h)
– Road spray
– A vehicle that is passing at speeds
lower than approximately 5 MPH
(8 km/h)
– Build up on the vehicle
– Ice build up on the vehicle
– Dirt build up on the vehicle
– Illustration a: When a vehicle parked
next to you obstructs the beam of the
radar sensor.
● Do not attach stickers (including transparent material), install accessories or
apply additional paint near the radar
sensors. These conditions may reduce
the ability of the radar to detect other
vehicles
– Illustration b: When the vehicle is
parked in an angled parking space.
● Do not use the RCTA systems when
towing a trailer.
● The radar sensors may not detect approaching vehicles in certain situations:
● Excessive noise (e.g. audio system volume, open vehicle window) will interfere with the chime sound, and it may
not be heard.
– Illustration c: When the vehicle is
parked on inclined ground.
Starting and driving 5-29
LSD2043
Illustration 1
NOTE:
● In the case of several vehicles approaching
in a row (Illustration 1) or in the opposite
direction (Illustration 2), a chime may not be
sounded by the RCTA system after the first
vehicle passes the sensors.
● The sonar system chime indicating there is a
object behind the vehicle has a higher priority than the RCTA chime (single beep) indicating an approaching vehicle. If the RCTA
system detects an object behind the vehicle
and an approaching vehicle at the same time
the following indications are provided:
5-30 Starting and driving
LSD2044
Illustration 2
– The sonar system chime sounds
– The Blind Spot Warning indicator light on
the side of the approaching vehicle
flashes
LSD2208
RCTA SYSTEM OPERATION
The BSW/RCTA system can be turned off temporarily by pushing the Blind Spot Warning and
1 . The
Rear Cross Traffic Alert switch 䊊
BSW/RCTA system automatically turns on every
time the engine is started.
The RCTA system can be turned off permanently
by a setting in the vehicle information display.
button until “Settings” dis1. Press the
plays in the vehicle information display. Use
button to select “Driver Assisthe
tance”. Then press the ENTER button.
2. Select “Driver Aids”, and press the ENTER
button.
3. To set the BSW/RCTA system to on or off,
use the buttons to navigate in the menu and
use the ENTER button to select or change
an item.
● Select “Blind Spot” and press the ENTER
button.
– To turn on the warning, use the ENTER
button to check box for “BSW/RCTA”
RCTA temporarily not available
When radar blockage is detected, the system will
be deactivated automatically. The “Side Radar
Obstruction” warning message will appear and
the Blind Spot indicator (white) will blink in the
vehicle information display. The Blind Spot Warning and Rear Cross Traffic Alert switch indicators
will also blink.
The systems are not available until the conditions
no longer exist.
The radar sensors may be blocked by temporary
ambient conditions such as splashing water, mist
or fog. The blocked condition may also be caused
by objects such as ice, frost or dirt obstructing
the radar sensors.
Action to take:
When the above conditions no longer exist, the
system will resume automatically.
RCTA malfunction
If the RCTA system malfunctions, the system will
turn off automatically. The system malfunction
warning message with the Blind spot indicator
(orange) will appear in the vehicle information
display. If the BSW system fails, the RCTA system will also fail.
Action to take:
Stop the vehicle in a safe location, turn the engine
off and restart the engine. If the message continues to appear, have the system checked by a
NISSAN dealer.
LSD2217
RADAR MAINTENANCE
1 for the BSW and
The two radar sensors 䊊
RCTA systems are located near the rear bumper.
Always keep the area near the radar sensors
clean.
The radar sensors may be blocked by temporary
ambient conditions such as splashing water, mist
or fog.
The blocked condition may also be caused by
objects such as ice, frost or dirt obstructing the
radar sensors.
Check for and remove objects obstructing the
area around the radar sensors.
Starting and driving 5-31
CRUISE CONTROL
Do not attach stickers (including transparent material), install accessories or apply additional
paint near the radar sensors.
Radio frequency statement
Applicable law: Canada 310
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that
may cause undesired operation of the device.
This device complies with part 15 of the
FCC Rules.
Frequency
24.25GHz
Operation is subject to the following two
conditions:
Output power: less than 20 milliwatts
Do not strike or damage the area around the
radar sensors. Consult a NISSAN dealer if the
area around the radar sensors is damaged due to
a collision.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
5-32 Starting and driving
of
operation:
24.05GHz
—
LSD2218
PRECAUTIONS ON CRUISE
CONTROL
1. ACCEL/RES switch
2. COAST/SET switch
3. CANCEL switch
4. ON·OFF switch
● If the cruise control system malfunctions, it
cancels automatically. The SET indicator
light illuminates in the vehicle information
display then blinks to warn the driver. For
additional information, refer to “Vehicle information display” in the “Instruments and controls” section of this manual.
● If the SET indicator light blinks, push the
cruise control ON·OFF switch off and have
the system checked by a NISSAN dealer.
● The SET indicator light may blink when the
cruise control ON·OFF switch is pushed ON
while
pushing
the
ACCEL/RES,
COAST/SET, or CANCEL switch. To properly set the cruise control system, use the
following procedures.
WARNING
Do not use the cruise control when driving
under the following conditions:
● When it is not possible to keep the
vehicle at a set speed.
● In heavy traffic or in traffic that varies in
speed.
● On winding or hilly roads.
● On slippery roads (rain, snow, ice, etc.).
● In very windy areas.
Doing so could cause a loss of vehicle
control and result in an accident.
CRUISE CONTROL OPERATIONS
The cruise control allows driving at a speed between 25 - 89 MPH (40 - 144 km/h) without
keeping your foot on the accelerator pedal.
To turn on the cruise control, push the
ON·OFF switch on. The CRUISE indicator light in
the vehicle information display will illuminate.
To set cruising speed, accelerate the vehicle to
the desired speed, push the COAST/SET switch
and release it. The SET indicator light in the
vehicle information display will illuminate. Take
your foot off the accelerator pedal. Your vehicle
maintains the set speed.
● To pass another vehicle, depress the accelerator pedal. When you release the
pedal, the vehicle returns to the previously
set speed.
● The vehicle may not maintain the set speed
when going up or down steep hills. If this
happens, drive without the cruise control.
To cancel the preset speed, use one of the
following three methods:
● Push the CANCEL button; the SET indicator
light in the vehicle information display goes
out.
● Push the ON·OFF switch off. Both the
CRUISE indicator light and SET indicator
light in the vehicle information display go out.
The cruise control is automatically canceled and
the SET light in the vehicle information display
goes out if:
● You depress the brake pedal while pushing
the ACCEL/RES or SET/COAST switch.
The preset speed is deleted from memory.
● The vehicle slows down more than 8 MPH
(13 km/h) below the set speed.
● You move the shift lever to N (Neutral).
To reset at a faster cruising speed, use one of
the following three methods:
● Depress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the COAST/SET switch.
● Push and hold the ACCEL/RES switch.
When the vehicle attains the speed you desire, release the switch.
● Push and release the ACCEL/RES switch.
Each time you do this, the set speed increases by about 1 MPH (1.6 km/h).
● Tap the brake pedal; the SET indicator light
goes out.
Starting and driving 5-33
BREAK-IN SCHEDULE
To reset at a slower cruising speed, use one
of the following three methods:
● Lightly tap the brake pedal. When the vehicle attains the desired speed, push the
COAST/SET switch and release it.
● Push and hold the COAST/SET switch. Release the switch when the vehicle slows to
the desired speed.
● Push and release the COAST/SET switch.
Each time you do this, the set speed decreases by about 1 MPH (1.6 km/h).
To resume the preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the
vehicle speed is over 25 MPH (40 km/h).
CAUTION
During the first 1,200 miles (2,000 km),
follow these recommendations to obtain
maximum engine performance and ensure
the future reliability and economy of your
new vehicle. Failure to follow these recommendations may result in shortened
engine
life
and
reduced
engine
performance.
● Avoid driving for long periods at constant
speed, either fast or slow, and do not run the
engine over 4,000 RPM.
● Do not accelerate at full throttle in any gear.
● Avoid quick starts.
● Avoid hard braking as much as possible.
● Do not tow a trailer for the first 500 mi
(805 km). Your engine, axle or other parts
could be damaged.
5-34 Starting and driving
FUEL EFFICIENT DRIVING TIPS
Follow these easy-to-use Fuel Efficient Driving
Tips to help you achieve the most fuel economy
from your vehicle.
1. Use Smooth Accelerator and Brake
Pedal Application
● Avoid rapid starts and stops.
● Use smooth, gentle accelerator and
brake application whenever possible.
● Maintain constant speed while commuting and coast whenever possible.
2. Maintain Constant Speed
● Look ahead to try and anticipate and minimize stops.
● Synchronizing your speed with traffic
lights allows you to reduce your number
of stops.
● Maintaining a steady speed can minimize
red light stops and improve fuel efficiency.
3. Use Air Conditioning (A/C) at Higher
Vehicle Speeds
● Below 40 MPH (64 km/h), it is more
efficient to open windows to cool the
vehicle due to reduced engine load.
● Above 40 MPH (64 km/h), it is more
efficient to use A/C to cool the vehicle
due to increased aerodynamic drag.
● Recirculating the cool air in the cabin
when the A/C is on reduces cooling load.
4. Drive at Economical Speeds and Distances
● Observing the speed limit and not exceeding 60 MPH (97 km/h) (where legally allowed) can improve fuel efficiency
due to reduced aerodynamic drag.
● Maintaining a safe following distance behind other vehicles reduces unnecessary
braking.
● Safely monitoring traffic to anticipate
changes in speed permits reduced braking and smooth acceleration changes.
● Select a gear range suitable to road conditions.
5. Use Cruise Control
● Using cruise control during highway driving helps maintain a steady speed.
● Cruise control is particularly effective in
providing fuel savings when driving on flat
terrains.
6. Plan for the Shortest Route
● Utilize a map or navigation system to determine the best route to save time.
● Your vehicle will reach its ideal operating
temperature more quickly while driving
versus idling.
10. Keeping your Vehicle Cool
● Park your vehicle in a covered parking
area or in the shade whenever possible.
● When entering a hot vehicle, opening the
windows will help to reduce the inside
temperature faster, resulting in reduced
demand on your A/C system.
7. Avoid Idling
● Shutting off your engine when safe for
stops exceeding 30–60 seconds saves
fuel and reduces emissions.
8. Buy an Automated Pass for Toll Roads
● Automated passes permit drivers to use
special lanes to maintain cruising speed
through the toll and avoid stopping and
starting.
9. Winter Warm Up
● Limit idling time to minimize impact to fuel
economy.
● Vehicles typically need no more than
30 seconds of idling at start-up to effectively circulate the engine oil before driving.
Starting and driving 5-35
INCREASING FUEL ECONOMY
● Keep your engine tuned up.
● Follow the recommended scheduled maintenance.
● Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear
and lowers fuel economy.
● Keep the wheels in correct alignment. Improper alignment increases tire wear and
lowers fuel economy.
● Use the recommended viscosity engine oil.
For additional information, refer to “Engine
oil and oil filter recommendations” in the
“Technical and consumer information” section of this manual.
INTELLIGENT 4WD (if so equipped)
4X4–I SYSTEM OPERATION
WARNING
● Do not drive beyond the performance
capability of the tires. Accelerating
quickly, sharp steering maneuvers or
sudden braking may cause loss of control, even with Intelligent 4WD engaged.
● For 4WD equipped vehicles, do not attempt to raise 2 wheels off the ground
and shift the transmission to any drive
or reverse position with the engine running. Doing so may result in drivetrain
damage or unexpected vehicle movement which could result in serious personal injury or vehicle damage.
● Do not attempt to test an 4WD equipped
vehicle on a 2-wheel dynamometer
(such as the dynamometers used by
some states for emissions testing) or
similar equipment even if the other 2
wheels are raised off the ground. Make
sure that you inform the test facility
personnel that your vehicle is equipped
with 4WD before it is placed on a dynamometer. Using the wrong test equipment may result in drivetrain damage or
unexpected vehicle movement which
could result in serious personal injury
or vehicle damage.
CAUTION
● Do not operate the engine on a free
roller when any of the wheels are
raised.
● If you use the free roller, rotate 4 wheels
with the same speed without raising
any wheels.
● If an 4WD warning message is displayed while driving there may be a
malfunction in the 4WD system. Reduce
the vehicle speed immediately and have
your vehicle checked by a NISSAN
dealer as soon as possible.
5-36 Starting and driving
● LOCK – To engage the LOCK mode, turn
the 4WD mode switch to the LOCK position. The switch will return to the AUTO
position automatically and the 4WD LOCK
indicator light in the vehicle information display illuminates. To disengage the LOCK
mode, turn the switch to the LOCK position
again. The switch will return to the AUTO
position automatically, and the 4WD LOCK
indicator light turns into the AUTO indicator
light. The LOCK mode will automatically be
cancelled when the ignition switch is turned
to the OFF position.
● If the 4WD high temperature message is
displayed while you are driving, pull off
the road in a safe area, and idle the
engine. The driving mode will change to
2WD to prevent the 4WD system from
malfunctioning. If the warning message
turns off, you can drive again.
● If the tire size incorrect message is displayed while you are driving, pull off the
road in a safe area with the engine
idling. Check that all tire sizes are the
same, that the tire pressure is correct
and that the tires are not excessively
worn.
● If a warning message continues to be
displayed after the above operations,
have your vehicle checked by a NISSAN
dealer as soon as possible.
LSD2206
4WD shift switch
The 4WD system is used to select the 2WD,
AUTO or LOCK mode depending on the driving
conditions.
Turn the 4WD mode switch, located on the center console, to select 2WD, AUTO, or LOCK.
● 2WD – Turn the 4WD mode switch to the
2WD position. The 2WD indicator light in
the vehicle information display illuminates.
● AUTO – Turn the 4WD mode switch to the
neutral (AUTO) position. The 4WD AUTO
indicator light in the vehicle information display illuminates.
Starting and driving 5-37
4WD mode
Wheels driven
4WD mode indicator
light
Use conditions
2WD
Front only – This mode
is used when driving on
a normal road *1
2WD
For driving on dry paved
roads.
AUTO
Distribution of torque to
the front and rear
wheels changes automatically depending on
road conditions
encountered. This results in improved driving
stability.
LOCK
4-Wheel Drive *2 *3
AUTO
For driving on paved or
slippery roads.
LOCK
For driving on rough
roads.
*1 The 2WD mode may change to the 4WD mode automatically depending on the driving conditions.
*2 The LOCK mode will change to the AUTO mode automatically when the vehicle has been driven at
a high speed. The 4WD LOCK indicator light turns into the AUTO indicator light.
*3 The LOCK mode will automatically be cancelled when the ignition switch is turned to the OFF
position.
5-38 Starting and driving
4WD shift tips
● If the 4WD mode switch is operated while
making a turn, accelerating or decelerating,
or if the ignition switch is turned off while in
the AUTO or LOCK mode, you may feel a
jolt. This is normal.
● The oil temperature of power train parts will
increase if the vehicle is continuously operated under conditions where the difference
between the front and rear wheels is large
(wheel slip), such as when driving the vehicle on rough roads through sand or mud or
when freeing a stuck vehicle. In these cases,
the 4WD mode changes to the 2WD mode
to protect the powertrain parts.
● Brake distance in the 4WD mode is the
same as 2WD.
CAUTION
● Depending on the driving condition, the
4WD mode may automatically change
from 2WD to 4WD even when the 2WD
mode is selected. If this occurs while
driving, the 4WD mode indicator light
will not illuminate.
● Do not start the engine with the 4WD
mode switch in any mode in the following cases:
– when the vehicle is placed on a freeroller or jacking up the vehicle with
the front tires raised and the rear
tires on the ground.
4WD mode indicator lights
The 2WD, 4WD AUTO and LOCK mode indicator lights are located in the vehicle information
display.
The 4WD mode indicator lights will display the
mode selected by the 4WD mode switch while
the engine is running.
The 4WD AUTO indicator light illuminates when
selecting the AUTO mode.
The 4WD LOCK indicator light illuminates when
selecting the LOCK mode and the 2WD indicator
light illuminates when selecting the 2WD mode.
– when towing the vehicle with the rear
tires raised from the ground.
● Operate the 4WD mode switch only
when driving straight. Do not operate
the 4WD mode switch when making a
turn or backing up.
● Do not operate the 4WD mode switch
with the front wheel spinning.
● Engine idling speed is high while warming up the engine. Be especially careful
when starting or driving on slippery surfaces with the 4WD mode switch set in
the AUTO mode.
Starting and driving 5-39
PARKING/PARKING ON HILLS
A
● HEADED DOWNHILL WITH CURB: 䊊
Turn the wheels into the curb and move the
vehicle forward until the curb side wheel
gently touches the curb.
B
● HEADED UPHILL WITH CURB: 䊊
Turn the wheels away from the curb and
move the vehicle back until the curb side
wheel gently touches the curb.
● HEADED UPHILL OR DOWNHILL, NO
C
CURB: 䊊
WSD0050
WARNING
● Do not stop or park the vehicle over
flammable materials such as dry grass,
waste paper or rags. They may ignite
and cause a fire.
● Safe parking procedures require that
both the parking brake be set and the
transmission placed into P (Park). Failure to do so could cause the vehicle to
move unexpectedly or roll away and result in an accident. Make sure the shift
lever has been pushed as far forward as
it can go and cannot be moved without
depressing the foot brake pedal.
5-40 Starting and driving
● Never leave the engine running while
the vehicle is unattended.
● Do not leave children unattended inside
the vehicle. They could unknowingly activate switches or controls. Unattended
children could become involved in serious accidents.
1. Firmly apply the parking brake.
2. Move the shift lever to the P (Park) position.
3. To help prevent the vehicle from rolling into
traffic when parked on an incline, it is a good
practice to turn the wheels as illustrated.
Turn the wheels toward the side of the road
so the vehicle will move away from the center of the road if it moves.
4. Place the ignition switch in the LOCK position.
POWER STEERING
WARNING
● If the engine is not running or is turned
off while driving, the power assist for
the steering will not work. Steering will
be harder to operate.
● When the power steering warning light
illuminates with the engine running,
there will be no power assist for the
steering. You will still have control of
the vehicle but the steering will be
harder to operate. Have the power
steering system checked by a NISSAN
dealer.
The power steering system is designed to provide power assist while driving to operate the
steering wheel with light force.
When the steering wheel is operated repeatedly
or continuously while parking or driving at a very
low speed, the power assist for the steering
wheel will be reduced. This is to prevent overheating of the power steering system and protect
it from getting damaged. While the power assist
is reduced, steering wheel operation will become
heavy. If the steering wheel operation is still performed, the power steering may stop and the
power steering warning light will illuminate. In a
safe location, stop the engine and push the ignition switch to the OFF position. The temperature
BRAKE SYSTEM
of the power steering system will go down after a
period of time and the power assist level will
return to normal after starting the engine. The
power steering warning light will go off. Avoid
repeating such steering wheel operations that
could cause the power steering system to overheat.
You may hear a noise from the front of the vehicle
when the steering wheel is operated. This is a
normal operational noise and is not a malfunction.
If the electric power steering warning light PS
illuminates while the engine is running, it may
indicate the power steering system is not functioning properly and may need servicing. Have
the power steering system checked by a
NISSAN dealer.
When the electric power steering warning light
illuminates with the engine running, there will be
no power assist for the steering but you will still
have control of the vehicle. At this time, greater
steering effort is required to operate the steering
wheel, especially in sharp turns and at low
speeds.
For additional information, refer to “Power steering warning light” in the “Instruments and controls” section of this manual.
The brake system has two separate hydraulic
circuits. If one circuit malfunctions, you will still
have braking at two wheels.
BRAKE PRECAUTIONS
Vacuum assisted brakes
The brake booster aids braking by using engine
vacuum. If the engine stops, you can stop the
vehicle by depressing the brake pedal. However,
greater foot pressure on the brake pedal will be
required to stop the vehicle and stopping distance will be longer.
Using the brakes
Avoid resting your foot on the brake pedal while
driving. This will overheat the brakes, wear out the
brake pads faster, and reduce gas mileage.
To help reduce brake wear and to prevent the
brakes from overheating, reduce speed and
downshift to a lower gear before going down a
slope or long grade. Overheated brakes may
reduce braking performance and could result in
loss of vehicle control.
Starting and driving 5-41
WARNING
● While driving on a slippery surface, be
careful when braking, accelerating or
downshifting. Abrupt braking or accelerating could cause the wheels to skid
and result in an accident.
● If the engine is not running or is turned
off while driving, the power assist for
the brakes will not work. Braking will be
harder.
Wet brakes
When the vehicle is washed or driven through
water, the brakes may get wet. As a result, your
braking distance will be longer and the vehicle
may pull to one side during braking.
To dry the brakes, drive the vehicle at a safe
speed while lightly pressing the brake pedal to
heat up the brakes. Do this until the brakes return
to normal. Avoid driving the vehicle at high
speeds until the brakes function correctly.
Parking brake break-in
Break-in the parking brake shoes whenever the
effect of the parking brake is weakened or whenever the parking brake shoes and/or drum/rotors
are replaced, in order to assure the best brake
performance.
5-42 Starting and driving
This procedure is described in the vehicle service
manual and can be performed by a NISSAN
dealer.
ANTI-LOCK BRAKING SYSTEM
(ABS)
WARNING
– When installing a spare tire, make
sure that it is the proper size and type
as specified on the Tire and Loading
Information label. For additional information, refer to “Tire and loading
information label” in the “Technical
and consumer information” section
of this manual.
● The Anti-lock Braking System (ABS) is a
sophisticated device, but it cannot prevent accidents resulting from careless
or dangerous driving techniques. It can
help maintain vehicle control during
braking on slippery surfaces. Remember that stopping distances on slippery
surfaces will be longer than on normal
surfaces even with ABS. Stopping distances may also be longer on rough,
gravel or snow covered roads, or if you
are using tire chains. Always maintain a
safe distance from the vehicle in front of
you. Ultimately, the driver is responsible for safety.
The Anti-lock Braking System (ABS) controls the
brakes so the wheels do not lock during hard
braking or when braking on slippery surfaces.
The system detects the rotation speed at each
wheel and varies the brake fluid pressure to prevent each wheel from locking and sliding. By
preventing each wheel from locking, the system
helps the driver maintain steering control and
helps to minimize swerving and spinning on slippery surfaces.
● Tire type and condition may also affect
braking effectiveness.
Using the system
– When replacing tires, install the
specified size of tires on all four
wheels.
– For additional information, refer to
“Wheels and tires” in the “Maintenance and do-it-yourself” section of
this manual.
Depress the brake pedal and hold it down. Depress the brake pedal with firm steady pressure,
but do not pump the brakes. The ABS will operate to prevent the wheels from locking up. Steer
the vehicle to avoid obstacles.
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM
WARNING
Do not pump the brake pedal. Doing so
may result in increased stopping
distances.
Self-test feature
The ABS includes electronic sensors, electric
pumps, hydraulic solenoids and a computer. The
computer has a built-in diagnostic feature that
tests the system each time you start the engine
and move the vehicle at a low speed in forward or
reverse. When the self-test occurs, you may hear
a “clunk” noise and/or feel a pulsation in the brake
pedal. This is normal and does not indicate a
malfunction. If the computer senses a malfunction, it switches the ABS off and illuminates the
ABS warning light on the instrument panel. The
brake system then operates normally, but without
anti-lock assistance.
If the ABS warning light illuminates during the
self-test or while driving, have the vehicle
checked by a NISSAN dealer.
Normal operation
When the ABS senses that one or more wheels
are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action
is similar to pumping the brakes very quickly. You
may feel a pulsation in the brake pedal and hear a
noise from under the hood or feel a vibration from
the actuator when it is operating. This is normal
and indicates that the ABS is operating properly.
However, the pulsation may indicate that road
conditions are hazardous and extra care is required while driving.
The Vehicle Dynamic Control (VDC) system uses
various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions,
the VDC System helps to perform the following
functions:
● Controls brake pressure to reduce wheel
slip on one slipping drive wheel so power is
transferred to a non slipping drive wheel on
the same axle.
BRAKE ASSIST
● Controls brake pressure and engine output
to reduce drive wheel slip based on vehicle
speed (traction control function).
When the force applied to the brake pedal exceeds a certain level, the brake assist is activated
generating greater braking force than a conventional brake booster even with light pedal force.
● Controls brake pressure at individual wheels
and engine output to help the driver maintain
control of the vehicle in the following conditions:
WARNING
The brake assist is only an aid to assist
braking operation and is not a collision
warning or avoidance device. it is the drivers responsibility to stay alert, drive safely
and be in control of the vehicle at all times.
– understeer (vehicle tends to not follow
the steered path despite increased steering input)
– oversteer (vehicle tends to spin due to
certain road or driving conditions)
The VDC system can help the driver to maintain
control of the vehicle, but it cannot prevent loss of
vehicle control in all driving situations.
The ABS operates at speeds above 3 - 6 MPH (5
- 10 km/h). The speed varies according to road
conditions.
Starting and driving 5-43
When the VDC system operates, the
indicator in the instrument panel flashes so note the
following:
● The road may be slippery or the system may
determine some action is required to help
keep the vehicle on the steered path.
● You may feel a pulsation in the brake pedal
and hear a noise or vibration from under the
hood. This is normal and indicates that the
VDC system is working properly.
● Adjust your speed and driving to the road
conditions.
For additional information, refer to “Slip indicator
light” and ”Vehicle Dynamic Control (VDC) OFF
indicator light” in the ”Instruments and controls”
section of this manual.
If a malfunction occurs in the system, the
and
indicator lights come on in the instrument panel. The VDC system automatically turns
off when these indicator lights are on.
The VDC OFF switch is used to turn off the VDC
indicator illuminates to indisystem. The
cate the VDC system is off.
When the VDC switch is used to turn off the
system, the VDC system still operates to prevent
one drive wheel from slipping by transferring
power to a non slipping drive wheel. The
5-44 Starting and driving
indicator flashes if this occurs. All other VDC
indicator will not
functions are off and the
flash.
The VDC system is automatically reset to on
when the ignition switch is placed in the OFF
position then back to the ON position.
The computer has a built in diagnostic feature
that tests the system each time you start the
engine and move the vehicle forward or in reverse
at a slow speed. When the self-test occurs, you
may hear a clunk noise and/or feel a pulsation in
the brake pedal. This is normal and is not an
indication of a malfunction.
WARNING
● The VDC system is designed to help the
driver maintain stability but does not
prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques.
Reduce vehicle speed and be especially
careful when driving and cornering on
slippery surfaces and always drive
carefully.
● Do not modify the vehicle’s suspension.
If suspension parts such as shock absorbers, struts, springs, stabilizer bars,
bushings and wheels are not NISSAN
recommended for your vehicle or are
extremely deteriorated, the VDC system
may not operate properly. This could
adversely affect vehicle handling perindicator may
formance, and the
and
indicaflash or both the
tor lights may illuminate.
● If brake related parts such as brake
pads, rotors and calipers are not
NISSAN recommended or are extremely
deteriorated, the VDC system may not
operate properly and both the
and the
indicator lights may
illuminate.
● If engine control related parts are not
NISSAN recommended or are extremely
and
deteriorated, both the
indicator lights may illuminate.
● When driving on extremely inclined surfaces such as higher banked corners,
the VDC system may not operate propindicator may flash or
erly and the
and
indicator
both the
lights may illuminate. Do not drive on
these types of roads.
● When driving on an unstable surface
such as a turntable, ferry, elevator or
indicator may flash or
ramp, the
and
indicator
both the
lights may illuminate. This is not a malfunction. Restart the engine after driving onto a stable surface.
● If wheels or tires other than the NISSAN
recommended ones are used, the VDC
system may not operate properly and
indicator may flash or both
the
and
indicator lights may
the
illuminate.
● The VDC system is not a substitute for
winter tires or tire chains on a snow
covered road.
RISE-UP AND BUILD-UP
The system gradually adjusts braking power during normal braking to help provide an enhanced
brake feel.
BRAKE FORCE DISTRIBUTION
During braking while driving through turns, the
system optimizes the distribution of force to each
of the four wheels depending on the radius of the
turn.
WARNING
● The VDC system is designed to help the
driver maintain stability but does not
prevent accidents due to abrupt steering operation at high speeds or by careless or dangerous driving techniques.
Reduce vehicle speed and be especially
careful when driving and cornering on
slippery surfaces and always drive
carefully.
● The active trace control and brake force
distribution systems may not be effective depending on the driving condition.
Always drive carefully and attentively.
● Do not modify the vehicle’s suspension.
If suspension parts such as shock absorbers, struts, springs, stabilizer bars,
bushings and wheels are not NISSAN
recommended for your vehicle or are
extremely deteriorated, the VDC system
may not operate properly. This could
adversely affect vehicle handling performance, and the VDC warning light
may illuminate.
● If brake related parts such as brake
pads, rotors and calipers are not
NISSAN recommended or are extremely
deteriorated, the VDC system may not
operate properly and the VDC warning
light may illuminate.
● If engine control related parts are not
NISSAN recommended or are extremely
deteriorated, the VDC warning light may
illuminate.
● When driving on extremely inclined surfaces such as higher banked corners,
the VDC system may not operate properly and the VDC warning light may illuminate. Do not drive on these types of
roads.
Starting and driving 5-45
HILL DESCENT CONTROL SYSTEM (if
so equipped)
● When driving on an unstable surface
such as a turntable, ferry, elevator or
ramp, the VDC warning light may illuminate. This is not a malfunction. Restart
the engine after driving onto a stable
surface.
● If wheels or tires other than the NISSAN
recommended ones are used, the VDC
system may not operate properly and
the VDC warning light may illuminate.
● The VDC system is not a substitute for
winter tires or tire chains on a snow
covered road.
WARNING
● Never rely solely on the hill descent
control system to control vehicle speed
when driving on steep downhill grades.
Always drive carefully and attentively
when using the hill descent control system and decelerate the vehicle speed by
depressing the brake pedal if necessary. Be especially careful when driving
on frozen, muddy or extremely steep
downhill roads. Failure to control vehicle speed may result in a loss of control of the vehicle and possible serious
injury or death.
If the hill descent control light is blinking, the hill
descent control is engaged; however, the hill
descent control will not control the vehicle
speed.
● Once the system is activated, the indicator
light will remain on in the instrument panel.
For additional information, refer to “Hill descent control system on indicator light” in the
“Instruments and controls” section of this
manual.
● The hill descent control may not control
the vehicle speed on a hill under all load
or road conditions. Always be prepared
to depress the brake pedal to control
vehicle speed. Failure to do so may result in a collision or serious personal
injury.
If the accelerator or brake pedal is depressed
while the hill descent control system is on, the
system will stop operating temporarily. As soon
as the accelerator or brake pedal is released, the
hill descent control system begins to function
again if the hill descent control operating conditions are fulfilled.
The hill descent control system can only be activated when the 4WD LOCK switch is engaged.
For the best results, when descending steep
downhill grades, the hill descent control switch
should be ON and the shift lever in L (Low gear)
for engine braking.
The hill descent control system helps maintain
vehicle speed when driving under 15 MPH
(25 km/h) on steeper downhill grades. Hill descent control is useful when engine braking alone
cannot control vehicle speed. Hill descent con-
5-46 Starting and driving
trol applies the vehicle brakes to control vehicle
speed allowing the driver to concentrate on
steering while reducing the burden of brake and
accelerator operation.
HILL START ASSIST SYSTEM
WARNING
● Never rely solely on the hill start assist
system to prevent the vehicle from moving backward on a hill. Always drive
carefully and attentively. Depress the
brake pedal when the vehicle is stopped
on a steep hill. Be especially careful
when stopped on a hill on frozen or
muddy roads. Failure to prevent the vehicle from rolling backwards may result
in a loss of control of the vehicle and
possible serious injury or death.
● The hill start assist system is not designed to hold the vehicle at a standstill
on a hill. Depress the brake pedal when
the vehicle is stopped on a steep hill.
Failure to do so may cause the vehicle
to roll backwards and may result in a
collision or serious personal injury.
● The hill start assist may not prevent the
vehicle from rolling backwards on a hill
under all load or road conditions. Always be prepared to depress the brake
pedal to prevent the vehicle from rolling
backwards. Failure to do so may result
in a collision or serious personal injury.
REAR SONAR SYSTEM (RSS) (if so
equipped)
The hill start assist system automatically keeps
the brakes applied to help prevent the vehicle
from rolling backward in the time it takes the
driver to release the brake pedal and apply the
accelerator when the vehicle is stopped on a hill.
Hill start assist will operate automatically under
the following conditions:
● The shift lever is shifted to a forward or
reverse gear.
● The vehicle is stopped completely on a hill
by applying the brake.
The maximum holding time is 2 seconds. After
2 seconds the vehicle will begin to roll back and
hill start assist will stop operating completely.
Hill start assist will not operate when the shift
lever is shifted into N (Neutral) or P (Park) or on a
flat and level road.
LSD0095
WARNING
● Always turn and look back before backing up. The RSS is not a substitute for
proper backing procedures.
● Read and understand the limitations of
the rear sonar system as contained in
this section. Inclement weather may affect the function of the RSS; this may
include reduced performance or a false
activation.
● This system is not designed to prevent
contact with small or moving objects.
Starting and driving 5-47
COLD WEATHER DRIVING
● The system is designed as an aid to the
driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small
objects below the bumper, and may not
detect objects close to the bumper or
on the ground.
● If your vehicle sustains damage to the
rear bumper fascia, leaving it misaligned or bent, the sensing zone may
be altered causing inaccurate measurement of obstacles or false alarms.
The RSS sounds a tone to warn the driver of
obstacles near the rear bumper when the shift
lever is in R (Reverse). The system may not
detect objects at speeds above 3 mph (5 km/h)
and may not detect certain angular or moving
objects.
The RSS detects obstacles up to 5.9 ft (1.8 m)
from the rear bumper with a decreased coverage
area at the outer corners of the bumper, (refer to
the illustration for approximate zone coverage
areas). As you move closer to the obstacle, the
rate of the tone increases. When the obstacle is
less than 10 in (25.0 cm) away, the tone will
sound continuously. If the RSS detects a stationary or receding object further than 10 in.
(25.0 cm) from the side of the vehicle, the tone
5-48 Starting and driving
will sound for only 3 seconds. Once the system
detects an object approaching, the tone will
sound again.
The RSS automatically turns on when the shift
lever is placed in R (Reverse) and the ignition
switch is placed in the ON position. The RSS
OFF switch on the instrument panel allows the
driver to turn the RSS on and off. To turn the RSS
off, the ignition switch must be placed in the ON
position. An indicator light on the switch will
illuminate when the system is turned off. If the
indicator light illuminates when the RSS is not
turned off, it may indicate a malfunction in the
RSS.
Keep the RSS sensors (located on the rear bumper fascia) free from snow, ice and large accumulations of dirt (do not clean the sensors with sharp
objects). If the sensors are covered, it will affect
the accuracy of the RSS.
FREEING A FROZEN DOOR LOCK
To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes
frozen, heat the key before inserting it into the key
hole, or use the NISSAN Intelligent Key®.
ANTIFREEZE
In the winter when it is anticipated that the temperature will drop below 32°F (0°C), check the
antifreeze to assure proper winter protection. For
additional information, refer to “Engine cooling
system” in the “Maintenance and do-it-yourself”
section of this manual.
BATTERY
If the battery is not fully charged during extremely
cold weather conditions, the battery fluid may
freeze and damage the battery. To maintain maximum efficiency, the battery should be checked
regularly. For additional information, refer to “Battery” in the “Maintenance and do-it-yourself” section of this manual.
DRAINING OF COOLANT WATER
If the vehicle is to be left outside without antifreeze, drain the cooling system, including the
engine block. Refill before operating the vehicle.
For additional information, refer to “Changing
engine coolant” in the “Maintenance and do-ityourself” section of this manual.
TIRE EQUIPMENT
1. SUMMER tires have a tread designed to
provide superior performance on dry pavement. However, the performance of these
tires will be substantially reduced in snowy
and icy conditions. If you operate your vehicle on snowy or icy roads, NISSAN recommends the use of MUD & SNOW or ALL
SEASON TIRES on all four wheels. Please
consult a NISSAN dealer for the tire type,
size, speed rating and availability information.
2. For additional traction on icy roads, studded
tires may be used. However, some U.S.
states and Canadian provinces prohibit their
use. Check local, state and provincial laws
before installing studded tires.
Skid and traction capabilities of studded
snow tires on wet or dry surfaces may be
poorer than that of non-studded snow tires.
3. Tire chains may be used. For additional information, refer to “Tire chains” in the “Maintenance and do-it-yourself” section of this
manual.
SPECIAL WINTER EQUIPMENT
It is recommended that the following items be
carried in the vehicle during winter:
● A scraper and stiff-bristled brush to remove
ice and snow from the windows and wiper
blades.
● A sturdy, flat board to be placed under the
jack to give it firm support.
● A shovel to dig the vehicle out of snowdrifts.
● Extra washer fluid to refill the windshieldwasher fluid reservoir.
DRIVING ON SNOW OR ICE
WARNING
● Wet ice (32°F, 0°C and freezing rain),
very cold snow or ice can be slick and
very hard to drive on. The vehicle will
have much less traction or “grip” under
these conditions. Try to avoid driving on
wet ice until the road is salted or
sanded.
● Whatever the condition, drive with caution. Accelerate and slow down with
care. If accelerating or downshifting too
fast, the drive wheels will lose even
more traction.
● Allow more stopping distance under
these conditions. Braking should be
started sooner than on dry pavement.
● Allow greater following distances on
slippery roads.
● Watch for slippery spots (glare ice).
These may appear on an otherwise
clear road in shaded areas. If a patch of
ice is seen ahead, brake before reaching it. Try not to brake while on the ice,
and avoid any sudden steering
maneuvers.
● Do not use the cruise control on slippery roads.
● Snow can trap dangerous exhaust
gases under your vehicle. Keep snow
clear of the exhaust pipe and from
around your vehicle.
ENGINE BLOCK HEATER (if so
equipped)
Engine block heaters are used to assist with cold
temperature starting.
The engine block heater should be used when
the outside temperature is 20°F (-7°C) or lower.
Starting and driving 5-49
WARNING
● Do not use your engine block heater
with an ungrounded electrical system or
a 2-pronged adapter. You can be seriously injured by an electrical shock if
you use an ungrounded connection.
● Disconnect and properly store the engine block heater cord before starting
the engine. Damage to the cord could
result in an electrical shock and can
cause serious injury.
● Use a heavy-duty 3-wire, 3-pronged extension cord rated for at least 10 A. Plug
the extension cord into a Ground Fault
Interrupt (GFI) protected, grounded
110-VAC outlet. Failure to use the
proper extension cord or a grounded
outlet can result in a fire or electrical
shock and cause serious personal
injury.
5-50 Starting and driving
To use the engine block heater:
1. Turn the engine off.
2. Open the hood and unwrap the engine block
heater cord.
3. Plug the engine block heater cord into a
grounded 3-wire, 3-pronged extension
cord.
4. Plug the extension cord into a Ground Fault
Interrupt (GFI) protected, grounded 110volt AC (VAC) outlet.
5. The engine block heater must be plugged in
for at least 2 - 4 hours, depending on outside
temperatures, to properly warm the engine
coolant. Use an appropriate timer to turn the
engine block heater on.
6. Before starting the engine, unplug and properly store the cord to keep it away from
moving parts.
6 In case of emergency
Hazard warning flasher switch . . . . . . . . . . . . . . . . . . . . . . 6-2
Emergency engine shut off . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Tire Pressure Monitoring System (TPMS). . . . . . . . . . 6-3
Changing a flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Push starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
If your vehicle overheats . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Towing your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Towing recommended by NISSAN . . . . . . . . . . . . . . 6-12
Vehicle recovery (freeing a stuck vehicle) . . . . . . . . . 6-14
HAZARD WARNING FLASHER
SWITCH
EMERGENCY ENGINE SHUT OFF
The flashers will operate with the ignition switch
placed in any position.
To shut off the engine in an emergency situation
while driving, perform the following procedure:
Some jurisdictions may prohibit the use of
the hazard warning flasher switch while
driving.
– Rapidly push the push-button ignition switch
three consecutive times in less than 1.5 seconds, or
– Push and hold the push-button ignition switch
for more than 2 seconds.
LCE2166
Push the switch on to warn other drivers when
you must stop or park under emergency conditions. All turn signal lights flash.
WARNING
● If stopping for an emergency, be sure to
move the vehicle well off the road.
● Do not use the hazard warning flashers
while moving on the highway unless
unusual circumstances force you to
drive so slowly that your vehicle might
become a hazard to other traffic.
● Turn signals do not work when the hazard warning flasher lights are on.
6-2 In case of emergency
FLAT TIRE
TIRE PRESSURE MONITORING
SYSTEM (TPMS)
This vehicle is equipped with TPMS. It monitors
tire pressure of all tires except the spare. When
the low tire pressure warning light is lit, and the
Tire Pressure Low - Add Air warning appears in
the vehicle information display, one or more of
your tires is significantly under-inflated. If
equipped, the system also displays pressure of
all tires (except the spare tire) on the display
screen by sending a signal from a sensor that is
installed in each wheel. If the vehicle is being
driven with low tire pressure, the TPMS will activate and warn you of it by the low tire pressure
warning light. This system will activate only when
the vehicle is driven at speeds above 16 mph
(25 km/h). For additional information, refer to
“Warning/indicator lights and audible reminders”
in the “Instruments and controls” section and
“Tire Pressure Monitoring System (TPMS)” in the
“Starting and driving” section of this manual.
WARNING
● Radio waves could adversely affect
electric medical equipment. Those who
use a pacemaker should contact the
electric medical equipment manufacturer for the possible influences before
use.
● If the low tire pressure warning light
illuminates while driving, avoid sudden
steering maneuvers or abrupt braking,
reduce vehicle speed, pull off the road
to a safe location and stop the vehicle
as soon as possible. Driving with underinflated tires may permanently damage
the tires and increase the likelihood of
tire failure. Serious vehicle damage
could occur and may lead to an accident
and could result in serious personal injury. Check the tire pressure for all four
tires. Adjust the tire pressure to the
recommended COLD tire pressure
shown on the Tire and Loading Information label to turn the low tire pressure
warning light OFF. If you have a flat tire,
replace it with a spare tire as soon as
possible.
● When a spare tire is mounted or a wheel
is replaced, tire pressure will not be
indicated, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.
Contact your NISSAN dealer as soon as
possible for tire replacement and/or
system resetting.
● Replacing tires with those not originally
specified by NISSAN could affect the
proper operation of the TPMS.
● Do not inject any tire liquid or aerosol
tire sealant into the tires, as this may
cause a malfunction of the tire pressure
sensors.
CHANGING A FLAT TIRE
If you have a flat tire, follow the instructions below:
Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a level surface and apply the parking
brake. Move the shift lever to P (Park).
4. Turn off the engine.
5. Raise the hood to warn other traffic and to
signal professional road assistance personnel that you need assistance.
6. Have all passengers get out of the vehicle
and stand in a safe place, away from traffic
and clear of the vehicle.
In case of emergency 6-3
WARNING
● Make sure the parking brake is securely
applied and the CVT is shifted into P
(Park).
● Never change tires when the vehicle is
on a slope, ice or slippery areas. This is
hazardous.
● Never change tires if oncoming traffic is
close to your vehicle. Wait for professional road assistance.
LCE2142
A.
Blocks
B.
Flat tire
Blocking wheels
Place suitable blocks at both the front and back
of the wheel diagonally opposite the flat tire to
prevent the vehicle from moving when it is jacked
up.
WARNING
Be sure to block the wheel as the vehicle
may move and result in personal injury.
6-4 In case of emergency
LCE2035
Getting the spare tire and tools
1. Open the liftgate and lift the luggage board
A.
in the cargo area using the handle 䊊
LCE2036
2. Remove the jack and tool kit cover by lifting
up using the handles.
LCE2037
B.
3. Remove the tool kit 䊊
● To release the tool kit, release the hook
C.
and eye straps 䊊
LCE2038
4. Remove the jack.
D . To
● The jack is secured by a fastener 䊊
release the fastener, assemble the extenE into the wheel nut wrench 䊊
F as
sion 䊊
illustrated and rotate counterclockwise to
release.
● Insert the flat end of the wheel nut wrench
F into the slot of the fastener 䊊
D , and
䊊
rotate counterclockwise to release the
jack.
5. The lowering mechanism for the spare tire is
located on the passenger side of the cargo
G to access the
area. Remove the cover 䊊
spare tire winch.
In case of emergency 6-5
9. Securely store the flat tire, tools and jacking
equipment in the vehicle.
CAUTION
● Make sure safety cable is coiled above
spare tire when reinstalling spare
tire/wheel.
LCE2169
H to the
6. Insert the spare tire winch socket 䊊
lowering mechanism nut.
7. To lower the spare tire, insert the wheel nut
F to the extension 䊊
E and insert
wrench 䊊
H
the T-shaped end to the winch socket 䊊
and rotate counterclockwise.
8. After removing the spare tire from under the
vehicle, be sure to crank the cable up to
stow it.
NOTE:
Fully lower the spare tire below the vehicle
before attempting to remove the winch
from the spare tire.
6-6 In case of emergency
● When re-installing the spare tire under
the vehicle after use, be sure to secure it
with the tire stem facing down toward
the ground. If the spare tire is improperly secured with the tire stem facing up
towards the bottom of the vehicle, there
is an increased risk of separating from
the vehicle in the event of a crash which
may pose a hazard in traffic or risk of
injury to others.
Jacking up vehicle and removing the
damaged tire
WARNING
● Never get under the vehicle while it is
supported only by the jack. If it is necessary to work under the vehicle, support it with safety stands.
● Use only the jack provided with your
vehicle to lift the vehicle. Do not use the
jack provided with your vehicle on other
vehicles. The jack is designed for lifting
only your vehicle during a tire change.
● Use the correct jack-up points. Never
use any other part of the vehicle for jack
support.
● Never jack up the vehicle more than
necessary.
● Never use blocks on or under the jack.
● Do not start or run the engine while
vehicle is on the jack. It may cause the
vehicle to move. This is especially true
for
vehicles
with
limited
slip
differentials.
● Do not allow passengers to stay in the
vehicle while it is on the jack.
● Never run the engine with a wheel(s) off
the ground. It may cause the vehicle to
move.
Always refer to the illustration for the correct
placement and jack-up points for your specific
vehicle model and jack type.
Carefully read the caution label attached to
the jack body and the following instructions.
1. Loosen each wheel nut one or two turns by
turning counterclockwise with the wheel nut
wrench. Do not remove the wheel nuts
until the tire is off the ground.
2. Place the jack directly under the jack-up
point as illustrated so the top of the jack
LCE2048
LCE0087
contacts the vehicle at the jack-up point. The
jack-up points are indicated by stamped arrows on the side of the frame.
3. Install the assembled jack rod into the jack
as shown.
The jack should be used on firm and
level ground.
4. To lift the vehicle, securely hold the jack lever
and rod. Carefully raise the vehicle until the
tire clears the ground.
In case of emergency 6-7
4. Lower the vehicle slowly until the tire
touches the ground. Then, with the wheel
nut wrench, tighten the wheel nuts securely
D,
A,䊊
B,䊊
C,䊊
in the sequence illustrated (䊊
E ). Lower the vehicle completely.
䊊
WARNING
● Incorrect wheel nuts or improperly
tightened wheel nuts can cause the
wheel to become loose or come off.
This could cause an accident.
LCE2043
WCE0056
NOTE:
Installing the spare tire
If the lug nut wrench/jack handle contacts
the ground while raising the vehicle, disassemble the lug nut wrench from the jack
extension rod, rotate it 90 degrees and reassemble.
The spare tire is designed for emergency
use. For additional information, refer to
“Wheels and tires” in the “Maintenance
and do-it-yourself” section of this manual.
5. Remove the wheel nuts and then remove the
tire.
1. Clean any mud or dirt from the surface between the wheel and hub.
2. Carefully put the spare tire on and tighten
the wheel nuts finger tight.
3. With the wheel nut wrench, tighten wheel
nuts alternately and evenly as illustrated until
A,䊊
B,䊊
C,䊊
D,䊊
E ).
they are tight (䊊
6-8 In case of emergency
● Do not use oil or grease on the wheel
studs or nuts. This could cause the nuts
to become loose.
● Retighten the wheel nuts when the vehicle has been driven for 600 miles
(1,000 km) (also in cases of a flat tire,
etc.).
As soon as possible, tighten the wheel nuts
to the specified torque with a torque
wrench.
Wheel nut tightening torque:
83 ft-lb (113 N·m)
The wheel nuts must be kept tightened to
specification at all times. It is recommended that wheel nuts be tightened to
specifications at each lubrication interval.
JUMP STARTING
Adjust tire pressure to the COLD pressure.
COLD pressure: After vehicle has been
parked for 3 hours or more or driven less
than 1 mile (1.6 km).
COLD tire pressures are shown on the tire
and loading information label affixed to the
driver side center pillar.
5. Securely store the flat tire, tools and jacking
equipment in the vehicle.
6. Close the liftgate.
WARNING
● Always make sure that the spare tire
and jacking equipment are properly secured after use. Such items can become
dangerous projectiles in an accident or
sudden stop.
● The spare tire is designed for emergency use. For additional information,
refer to “Wheels and tires” in the “Maintenance and do-it-yourself” section of
this manual.
To start your engine with a booster battery, the
instructions and precautions below must be followed.
WARNING
● If done incorrectly, jump starting can
lead to a battery explosion, resulting in
severe injury or death. It could also
damage your vehicle.
● Explosive hydrogen gas is always present in the vicinity of the battery. Keep all
sparks and flames away from the
battery.
● Whenever working on or near a battery,
always wear suitable eye protectors (for
example, goggles or industrial safety
spectacles) and remove rings, metal
bands, or any other jewelry. Do not lean
over the battery when jump starting.
● Do not attempt to jump start a frozen
battery. It could explode and cause serious injury.
● Your vehicle has an automatic engine
cooling fan. It could come on at any
time. Keep hands and other objects
away from it.
● Do not allow battery fluid to come into
contact with eyes, skin, clothing or
painted surfaces. Battery fluid is a corrosive sulfuric acid solution which can
cause severe burns. If the fluid should
come into contact with anything, immediately flush the contacted area with
water.
● Keep battery out of the reach of
children.
● The booster battery must be rated at
12 volts. Use of an improperly rated
battery can damage your vehicle.
In case of emergency 6-9
5. Start the engine of the booster vehicle and
let it run for a few minutes.
6. Keep the engine speed of the booster vehicle at about 2,000 rpm and start the engine of the vehicle being jump started.
CAUTION
Do not keep the starter motor engaged for
more than 10 seconds. If the engine does
not start right away, place the ignition
switch in the OFF position and wait 3 to
4 seconds before trying again.
WCE0054
WARNING
Always follow the instructions below. Failure to do so could result in damage to the
charging system and cause personal
injury.
1. If the booster battery is in another vehicle,
position the two vehicles to bring their batteries near each other.
Do not allow the two vehicles to touch.
2. Apply the parking brake. Move the shift lever
to P (Park). Switch off all unnecessary electrical systems (lights, heater, air conditioner,
etc.).
6-10 In case of emergency
3. Ensure the vent caps are level and tight.
4. Connect the jumper cables in the sequence
A,䊊
B,䊊
C,䊊
D ).
illustrated (䊊
CAUTION
● Always connect positive (⫹) to positive
(⫹) and negative (⫺) to body ground (for
example, strut mounting bolt, engine
lift bracket, etc.) — not to the battery.
● Make sure the jumper cables do not
touch moving parts in the engine compartment and that the cable clamps do
not contact any other metal.
7. After starting the engine, carefully disconnect the negative cable and then the positive
cable.
PUSH STARTING
CAUTION
IF YOUR VEHICLE OVERHEATS
WARNING
● CVT models cannot be push-started or
tow-started. Attempting to do so may
cause transmission damage.
● Do not continue to drive if your vehicle
overheats. Doing so could cause engine
damage or a vehicle fire.
● Do not push start this vehicle. The 3-way
catalyst may be damaged.
● To avoid the danger of being scalded,
never remove the radiator or coolant
reservoir cap while the engine is still
hot. When the radiator or coolant reservoir cap is removed, pressurized hot
water will spurt out, possibly causing
serious injury.
● Do not open the hood if steam is coming out.
If your vehicle is overheating (indicated by an
extremely high temperature gauge reading and
the illumination of the engine oil pressure/engine
coolant temperature high indicator light), or if you
feel a lack of engine power, detect abnormal
noise, etc. take the following steps:
1. Move the vehicle safely off the road, apply
the parking brake and move the shift lever to
P (Park).
Do not stop the engine.
2. Turn off the air conditioner. Open all the
windows, move the heater or air conditioner
temperature control to maximum hot and fan
control to high speed.
3. Get out of the vehicle. Look and listen for
steam or coolant escaping from the radiator
before opening the hood. If steam or coolant
is escaping, turn off the engine. Do not open
the hood further until no steam or coolant
can be seen.
4. Open the engine hood.
WARNING
If steam or water is coming from the engine, stand clear to prevent getting
burned.
5. Visually check drive belts for damage or
looseness. Also check if the cooling fan is
running. The radiator hoses and radiator
should not leak water. If coolant is leaking,
the water pump belt is missing or loose, or
the cooling fan does not run, stop the engine.
WARNING
Be careful not to allow your hands, hair,
jewelry or clothing to come into contact
with, or get caught in, engine belts or the
engine cooling fan. The engine cooling fan
can start at any time.
In case of emergency 6-11
TOWING YOUR VEHICLE
6. After the engine cools down, check the coolant level in the engine coolant reservoir tank
with the engine running. Add coolant to the
engine coolant reservoir tank if necessary.
Have your vehicle repaired at a NISSAN
dealer.
When towing your vehicle, all jurisdictional and
local regulations for towing must be followed.
Incorrect towing equipment could damage your
vehicle. Towing instructions are available from a
NISSAN dealer. Local service operators are generally familiar with the applicable laws and procedures for towing. To assure proper towing and to
prevent accidental damage to your vehicle,
NISSAN recommends having a service operator
tow your vehicle. It is advisable to have the service operator carefully read the following precautions:
WARNING
● Never ride in a vehicle that is being
towed.
● Never get under your vehicle after it has
been lifted by a tow truck.
CAUTION
● When towing, make sure that the transmission, axles, steering system and
powertrain are in working condition. If
any of these conditions apply, dollies or
a flatbed tow truck must be used.
● Always attach safety chains before
towing.
6-12 In case of emergency
For additional information about towing your vehicle behind a recreational vehicle (RV), refer to
“Flat towing” in the “Technical and Consumer
Information” section of this manual.
TOWING RECOMMENDED BY
NISSAN
NISSAN recommends towing your vehicle based
upon the type of drivetrain. Please refer to the
diagrams in this section to ensure that your vehicle is properly towed.
LCE2049
Four-wheel drive models
NISSAN recommends that towing dollies be
used when towing your vehicle or place the vehicle on a flat bed truck as illustrated.
CAUTION
Never tow 4WD models with any of the
wheels on the ground as this may cause
serious and expensive damage to the
powertrain.
In case of emergency 6-13
Pulling a stuck vehicle
WARNING
To avoid vehicle damage, serious personal
injury or death when recovering a stuck
vehicle:
● Contact a professional towing service
to recover the vehicle if you have any
questions regarding the recovery
procedure.
LCE2041
Front-wheel drive models
NISSAN recommends that your vehicle be towed
with the driving wheels (front) off the ground or
place the vehicle on a flat bed truck as illustrated.
WARNING
● Never tow your vehicle with the front
wheels on the ground or 4 wheels on
the ground (forward or backward), as
this may cause serious and expensive
damage to the transmission. If it is necessary to tow the vehicle with the rear
wheels raised always use towing dollies
under the front wheels.
6-14 In case of emergency
● When towing with the rear wheels on
the ground or on towing dollies, place
the ignition switch in the ACC or ON
position, and secure the steering wheel
in the straight-ahead position with a
rope or similar device.
VEHICLE RECOVERY (freeing a stuck
vehicle)
There are two options to recover a stuck vehicle:
pulling and rocking. For additional information,
regarding these options, please refer to the following sections.
● Attach recovery devices only to main
structural members of the vehicle or the
recovery hooks.
● Do not use the vehicle tie-downs to tow
or free a stuck vehicle.
● Only use devices specifically designed
for vehicle recovery and follow the
manufacturer’s instructions.
● Always pull the recovery device straight
out from the front of the vehicle. Never
pull at an angle.
● Route recovery devices so they do not
touch any part of the vehicle except the
attachment point.
If your vehicle is stuck in sand, snow, mud, etc.,
use a tow strap or other device designed specifically for vehicle recovery. Always follow the
manufacturer’s instructions for the recovery device.
Do not use the tie-down hooks for towing or
vehicle recovery.
Rocking a stuck vehicle
WARNING
● Stand clear of a stuck vehicle.
● Shift back and forth between R (Reverse)
and D (Drive).
● Apply the accelerator as little as possible
to maintain the rocking motion.
● Release the accelerator pedal before
shifting between R and D.
● Do not spin the tires above 35 mph
(55 km/h).
5. If the vehicle cannot be freed after a few
tries, contact a professional towing service
to remove the vehicle.
● Do not spin your tires at high speed.
This could cause them to explode and
result in serious injury. Parts of your
vehicle could also overheat and be
damaged.
If your vehicle is stuck in sand, snow, mud, etc.,
use the following procedure:
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is clear of obstructions.
3. Turn the steering wheel right and left to clear
an area around the front tires.
4. Slowly rock the vehicle forward and backward.
In case of emergency 6-15
MEMO
6-16 In case of emergency
7 Appearance and care
Cleaning exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Removing spots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Underbody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Aluminum alloy wheels . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Chrome parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Tire dressings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Cleaning interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Air fresheners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Power Moonroof (if so equipped). . . . . . . . . . . . . . . . . 7-4
Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Cleaning the seat tracks. . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Corrosion protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Most common factors contributing to vehicle
corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Environmental factors influence the rate of
corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Protect your vehicle from corrosion . . . . . . . . . . . . . . . 7-7
CLEANING EXTERIOR
In order to maintain the appearance of your vehicle, it is important to take proper care of it.
To protect the paint surfaces, please wash your
vehicle as soon as you can:
● after a rainfall to prevent possible damage
from acid rain
● after driving on coastal roads
● when contaminants such as soot, bird droppings, tree sap, metal particles or bugs get
on the paint surface
● when dust or mud builds up on the surface
Whenever possible, store or park your vehicle
inside a garage or in a covered area.
When it is necessary to park outside, park in a
shady area or protect the vehicle with a body
cover.
Be careful not to scratch the paint surface
when putting on or removing the body
cover.
WASHING
Wash dirt off with a wet sponge and plenty of
water. Clean the vehicle thoroughly using a mild
soap, a special vehicle soap or general purpose
dishwashing liquid mixed with clean, lukewarm
(never hot) water.
7-2 Appearance and care
CAUTION
● Do not use car washes that use acid in
the detergent. Some car washes, especially brushless ones, use some acid for
cleaning. The acid may react with some
plastic vehicle components, causing
them to crack. This could affect their
appearance, and also could cause them
not to function properly. Always check
with your car wash to confirm that acid
is not used.
● Do not wash the vehicle with strong
household soap, strong chemical detergents, gasoline or solvents.
● Do not wash the vehicle in direct sunlight or while the vehicle body is hot, as
the surface may become water-spotted.
● Avoid using tight-napped or rough
cloths, such as washing mitts. Care
must be taken when removing
caked-on dirt or other foreign substances so the paint surface is not
scratched or damaged.
Rinse the vehicle thoroughly with plenty of clean
water.
Inside edges, seams and folds on the doors,
hatches and hood are particularly vulnerable to
the effects of road salt. Therefore, these areas
must be cleaned regularly. Take care that the
drain holes in the lower edge of the door are
open. Spray water under the body and in the
wheel wells to loosen the dirt and wash away
road salt.
A damp chamois can be used to dry the vehicle to
avoid water spots.
WAXING
Regular waxing protects the paint surface and
helps retain new vehicle appearance. Polishing is
recommended to remove built-up wax residue
and to avoid a weathered appearance before
re-applying wax.
A NISSAN dealer can assist you in choosing the
proper product.
● Wax your vehicle only after a thorough washing. Follow the instructions supplied with the
wax.
● Do not use a wax containing any abrasives,
cutting compounds or cleaners that may
damage the vehicle finish.
Machine compounding or aggressive polishing
on a base coat/clear coat paint finish may dull the
finish or leave swirl marks.
REMOVING SPOTS
CAUTION
Remove tar and oil spots, industrial dust, insects,
and tree sap as quickly as possible from the
surface of the paint to avoid lasting damage or
staining. Special cleaning products are available
at a NISSAN dealer or any automotive accessory
store.
When cleaning the inside of the windows,
do not use sharp-edged tools, abrasive
cleaners or chlorine-based disinfectant
cleaners. They could damage the electrical
conductors, radio antenna elements or
rear window defroster elements.
UNDERBODY
ALUMINUM ALLOY WHEELS
In areas where road salt is used in winter, it is
necessary to clean the underbody regularly in
order to prevent dirt and salt from building up and
causing the acceleration of corrosion on the underbody and suspension. Before the winter period and again in the spring, the underseal must
be checked and, if necessary, re-treated.
Wash the wheels regularly with a sponge dampened in a mild soap solution, especially during
winter months in areas where road salt is used. If
not removed, road salt can discolor the wheels.
GLASS
Use glass cleaner to remove smoke and dust film
from the glass surfaces. It is normal for glass to
become coated with a film after the vehicle is
parked in the hot sun. Glass cleaner and a soft
cloth will easily remove this film.
CAUTION
Follow the directions below to avoid
staining or discoloring the wheels:
● Do not use a cleaner that uses strong
acid or alkali contents to clean the
wheels.
● Do not apply wheel cleaners to the
wheels when they are hot. The wheel
temperature should be the same as ambient temperature.
● Rinse the wheel to completely remove
the cleaner within 15 minutes after the
cleaner is applied.
CHROME PARTS
Clean all chrome parts regularly with a nonabrasive chrome polish to maintain the finish.
TIRE DRESSINGS
NISSAN does not recommend the use of tire
dressings. Tire manufacturers apply a coating to
the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may
react with the coating and form a compound. This
compound may come off the tire while driving and
stain the vehicle paint.
If you choose to use a tire dressing, take the
following precautions:
● Use a water-based tire dressing. The coating on the tire dissolves more easily than
with an oil-based tire dressing.
● Apply a light coat of tire dressing to help
prevent it from entering the tire
tread/grooves (where it would be difficult to
remove).
● Wipe off excess tire dressing using a dry
towel. Make sure the tire dressing is completely removed from the tire tread/grooves.
● Allow the tire dressing to dry as recommended by the tire dressing manufacturer.
Appearance and care 7-3
CLEANING INTERIOR
Occasionally remove loose dust from the interior
trim, plastic parts and seats using a vacuum
cleaner or soft bristled brush. Wipe the vinyl and
leather surfaces with a clean, soft cloth dampened in mild soap solution, then wipe clean with a
dry, soft cloth.
Regular care and cleaning is required in order to
maintain the appearance of the leather.
Before using any fabric protector, read the manufacturer’s recommendations. Some fabric protectors contain chemicals that may stain or
bleach the seat material.
Use a cloth dampened only with water to clean
the meter and gauge lens.
WARNING
Do not use water or acidic cleaners (hot
steam cleaners) on the seat. This can damage the seat or occupant classification
sensor. This can also affect the operation
of the air bag system and result in serious
personal injury.
CAUTION
● Never use benzine, thinner or any similar material.
● Small dirt particles can be abrasive and
damaging to leather surfaces and
should be removed promptly. Do not
use saddle soap, car waxes, polishes,
oils, cleaning fluids, solvents, detergents or ammonia-based cleaners as
they may damage the leather’s natural
finish.
● Never use fabric protectors unless recommended by the manufacturer.
● Do not use glass or plastic cleaner on
meter or gauge lens covers. It may damage the lens cover.
AIR FRESHENERS
Most air fresheners use a solvent that could affect
the vehicle interior. If you use an air freshener,
take the following precautions:
● Hanging-type air fresheners can cause permanent discoloration when they contact vehicle interior surfaces. Place the air freshener in a location that allows it to hang free
and not contact an interior surface.
7-4 Appearance and care
● Liquid-type air fresheners typically clip on
the vents. These products can cause immediate damage and discoloration when
spilled on interior surfaces.
Carefully read and follow the manufacturer’s instructions before using the air fresheners.
POWER MOONROOF (if so
equipped)
The sunshade is made from a suede material.
CAUTION
To help prevent damaging the moonroof
while cleaning:
● Do not rub the material with a cloth.
Doing so can damage the surface of the
material or cause a stain to spread.
● Never use benzine, thinner or any similar chemical to clean the suede. This
may discolor the moonroof and damage
the surface.
● Clean water based stains by patting the
surface with a clean soft cloth dampened in warm water. Press a clean dry
cloth onto the surface to remove as
much dampness as possible and then
let air dry.
● Clean oil based stains by patting the
surface with a clean soft cloth dampened in warm water. Press a clean dry
cloth onto the surface to remove as
much dampness as possible and then
let air dry.
The use of Genuine NISSAN floor mats can
extend the life of your vehicle carpet and make it
easier to clean the interior. Mats should be maintained with regular cleaning and replaced if they
become excessively worn.
FLOOR MATS
WARNING
To avoid potential pedal interference that
may result in a collision or injury:
● NEVER place a floor mat on top of another floor mat in the driver front
position.
● Use only Genuine NISSAN floor mats
specifically designed for use in your vehicle model. For additional information,
refer to a NISSAN dealer.
● Properly position the mats in the floorwell using the floor mat positioning aid.
For additional information, refer to
ⴖFloor mat positioning aidⴖ in this
section.
LAI2002
Bracket
Floor mat positioning aid
This vehicle includes the following floor mat positioning aids to help keep your floor mats in
place:
● two driver’s side front floor mat brackets
● two passenger’s side front floor mat brackets
● one driver’s side 2nd row floor mat bracket
● one passenger’s side 2nd row floor mat
bracket
Appearance and care 7-5
CORROSION PROTECTION
SEAT BELTS
The seat belts can be cleaned by wiping them
with a sponge dampened in a mild soap solution.
Allow the belts to dry completely in the shade
before using them. For additional information,
refer to “Seat belt maintenance” in the “Safety –
Seats, seat belts and supplemental restraint system” section of this manual.
WARNING
LAI2003
Bracket positions
Genuine NISSAN floor mats have been specially
designed for your vehicle model. The floor mats
have grommet holes incorporated in them. Position each mat by placing the floor mat bracket
hook through the floor mat grommet holes while
centering the mat in the floorwell.
Periodically check to make certain the mats are
properly positioned.
7-6 Appearance and care
Do not allow wet seat belts to roll up in the
retractor. NEVER use bleach, dye or
chemical solvents to clean the seat belts,
since these materials may severely
weaken the seat belt webbing.
CLEANING THE SEAT TRACKS
CAUTION
Periodically clean the seat tracks to prevent reduction of ability to move the seats.
Clean periodically with a high-powered vacuum
cleaner. Dirt and debris may reduce the ability to
adjust the seat. A wet cleansing agent may be
used if necessary.
MOST COMMON FACTORS
CONTRIBUTING TO VEHICLE
CORROSION
Most vehicle corrosion is caused by:
● the accumulation of moisture-retaining dirt
and debris in body panel sections, cavities,
and other areas
● damage to paint and other protective coatings caused by gravel and stone chips or
minor traffic collisions
ENVIRONMENTAL FACTORS
INFLUENCE THE RATE OF
CORROSION
Moisture
Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion.
Wet floor coverings will not dry completely inside
the vehicle and should be removed for drying to
avoid floor panel corrosion.
Relative humidity
Corrosion will be accelerated in areas of high
relative humidity, especially those areas where
the temperatures stay above freezing and where
atmospheric pollution exists and road salt is
used.
Temperature
CAUTION
Air pollution
● NEVER remove dirt, sand or other debris from the passenger compartment
by washing it out with a hose. Remove
dirt with a vacuum cleaner or broom.
Industrial pollution, the presence of salt in the air
in coastal areas, or heavy road salt use accelerates the corrosion process. Road salt also accelerates the disintegration of paint surfaces.
● Never allow water or other liquids to
come in contact with electronic components inside the vehicle as this may
damage them.
High temperatures accelerate the rate of corrosion to those parts which are not well ventilated.
PROTECT YOUR VEHICLE FROM
CORROSION
● Wash and wax your vehicle often to keep the
vehicle clean.
● Always check for minor damage to the paint
and repair it as soon as possible.
● Keep drain holes at the bottom of the doors
open to avoid water accumulation.
● Check the underbody for accumulation of
sand, dirt or salt. If present, wash with water
as soon as possible.
Chemicals used for road surface de-icing are
extremely corrosive. They accelerate corrosion
and deterioration of underbody components
such as the exhaust system, fuel and brake lines,
brake cables, floor pan and fenders.
In winter, the underbody must be cleaned
periodically.
For additional protection against rust and corrosion, which may be required in some areas, consult a NISSAN dealer.
Appearance and care 7-7
MEMO
7-8 Appearance and care
8 Maintenance and do-it-yourself
Maintenance requirements. . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
General maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Explanation of general maintenance items . . . . . . . . . 8-2
Maintenance precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Engine compartment check locations . . . . . . . . . . . . . . . . 8-6
Engine cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
Checking engine coolant level . . . . . . . . . . . . . . . . . . . 8-8
Changing engine coolant . . . . . . . . . . . . . . . . . . . . . . . . 8-8
Engine oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Checking engine oil level . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Changing engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Changing engine oil filter . . . . . . . . . . . . . . . . . . . . . . . 8-11
Continuously Variable Transmission (CVT) fluid . . . . . . 8-12
Power steering fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13
Windshield-washer fluid. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13
Windshield-washer fluid reservoir . . . . . . . . . . . . . . . 8-13
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
Jump starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
Variable voltage control system (if so equipped) . . . . . . 8-16
Drive belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
Spark plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
Replacing spark plugs . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
In-cabin microfilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
Windshield wiper blades . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19
Replacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-21
Engine compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-21
Passenger compartment . . . . . . . . . . . . . . . . . . . . . . . 8-22
Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23
NISSAN Intelligent Key® . . . . . . . . . . . . . . . . . . . . . . . 8-24
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
Fog lights (if so equipped) . . . . . . . . . . . . . . . . . . . . . . 8-25
Exterior and interior lights. . . . . . . . . . . . . . . . . . . . . . . 8-26
Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-29
Tire pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-29
Tire labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32
Types of tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-35
Tire chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-36
Changing wheels and tires . . . . . . . . . . . . . . . . . . . . . 8-36
MAINTENANCE REQUIREMENTS
Your NISSAN is designed to have minimum maintenance requirements with long service intervals
to save you both time and money; however, some
day-to-day and regular maintenance is essential
to maintain your NISSAN’s good mechanical
condition as well as its emissions and engine
performance.
It is the owner’s responsibility to make sure that
the scheduled maintenance, as well as general
maintenance, is performed.
As the vehicle owner, you are the only one who
can ensure that your vehicle receives proper
maintenance. You are a vital link in the maintenance chain.
Scheduled maintenance
For your convenience, both required and optional
scheduled maintenance items are described and
listed in your “NISSAN Service and Maintenance
Guide”. You must refer to that guide to ensure
that necessary maintenance is performed on your
NISSAN at regular intervals.
General maintenance
General maintenance includes those items which
should be checked during normal day-to-day operation. They are essential for proper vehicle operation. It is your responsibility to perform these
maintenance procedures regularly as prescribed.
8-2 Maintenance and do-it-yourself
GENERAL MAINTENANCE
Performing general maintenance checks requires
minimal mechanical skill and only a few general
automotive tools.
Where to go for service
During the normal day-to-day operation of the
vehicle, general maintenance should be performed regularly as prescribed in this section. If
you detect any unusual sounds, vibrations or
smells, be sure to check for the cause or have a
NISSAN dealer do it promptly. In addition, you
should notify a NISSAN dealer if you think that
repairs are required.
If maintenance service is required or your vehicle
appears to malfunction, have the systems
checked and corrected by a NISSAN dealer.
When performing any checks or maintenance
work, closely observe the “Maintenance precautions” in this section.
NISSAN technicians are well-trained specialists
who are kept up-to-date with the latest service
information through technical bulletins, service
tips and in-dealership training programs. They
are completely qualified to work on NISSAN vehicles before they work on your vehicle rather
than after they have worked on it.
EXPLANATION OF GENERAL
MAINTENANCE ITEMS
You can be confident that a NISSAN dealer’s
service department performs the best job to meet
the maintenance requirements on your vehicle —
in a reliable and economical way.
The maintenance items listed here should be
performed from time to time, unless otherwise
specified.
These checks or inspections can be done by you,
a qualified technician or, if you prefer, a NISSAN
dealer.
Additional information on the following
items with “ * ” is found in this section.
Outside the vehicle
Doors and engine hood Check that the doors
and engine hood operate properly. Also ensure that
all latches lock securely. Lubricate hinges, latches,
latch pins, rollers and links as necessary. Make sure
that the secondary latch keeps the hood from
opening when the primary latch is released.
When driving in areas using road salt or other
corrosive materials, check lubrication frequently.
Lights* Clean the headlights on a regular basis.
Make sure that the headlights, stop lights, tail
lights, turn signal lights, and other lights are all
operating properly and installed securely. Also
check headlight aim.
● For additional information regarding tires,
refer to “Important Tire Safety Information”
(US) or “Tire Safety Information” (Canada) in
the Warranty Information Booklet.
Road wheel nuts (lug nuts)* When checking
the tires, make sure no wheel nuts are missing,
and check for any loose wheel nuts. Tighten if
necessary.
Windshield Clean the windshield on a regular
basis. Check the windshield at least every six
months for cracks or other damage. Have a damaged windshield repaired by a qualified repair
facility.
Tire rotation* Tires should be rotated every
5,000 miles (8,000 km).
Windshield wiper blades* Check for cracks or
wear if they do not wipe properly.
Tires* Check the pressure with a gauge often
and always prior to long distance trips. If necessary, adjust the pressure in all tires, including the
spare, to the pressure specified. Check carefully
for damage, cuts or excessive wear.
Inside the vehicle
Tire Pressure Monitoring System (TPMS)
transmitter components Replace the TPMS
transmitter grommet seal, valve core and cap
when the tires are replaced due to wear or age.
Wheel alignment and balance If the vehicle
should pull to either side while driving on a
straight and level road, or if you detect uneven or
abnormal tire wear, there may be a need for wheel
alignment. If the steering wheel or seat vibrates at
normal highway speeds, wheel balancing may be
needed.
The maintenance items listed here should be
checked on a regular basis, such as when performing periodic maintenance, cleaning the vehicle, etc.
Additional information on the following
items with an “*” is found in this section.
Accelerator pedal Check the pedal for smooth
operation and make sure the pedal does not bind
or require uneven effort. Keep the floor mat away
from the pedal.
Brake pedal Check the pedal for smooth operation. If the brake pedal suddenly goes down further than normal, the pedal feels spongy or the
vehicle seems to take longer to stop, see a
NISSAN dealer immediately. Keep the floor mat
away from the pedal.
Brakes Check that the brakes do not pull the
vehicle to one side when applied.
Continuously Variable Transmission (CVT)
P (Park) position mechanism On a fairly
steep hill check that your vehicle is held securely
with the shift lever in the P (Park) position without
applying any brakes.
Parking brake Check the parking brake operation regularly. The vehicle should be securely held
on a fairly steep hill with only the parking brake
applied. If the parking brake needs adjustment,
see a NISSAN dealer.
Seats Check seat position controls such as seat
adjusters, seatback recliner, etc. to ensure they
operate smoothly and all latches lock securely in
every position. Check that the head
restraints/headrests move up and down
smoothly and the locks (if so equipped) hold
securely in all latched positions.
Seat belts Check that all parts of the seat belt
system (for example, buckles, anchors, adjusters
and retractors) operate properly and smoothly,
and are installed securely. Check the belt webbing for cuts, fraying, wear or damage.
Steering wheel Check for changes in the steering system, such as excessive freeplay, hard
steering or strange noises.
Maintenance and do-it-yourself 8-3
Warning lights and chimes Make sure all
warning lights and chimes are operating properly.
Windshield wiper and washer* Check that
the wipers and washer operate properly and that
the wipers do not streak.
Windshield defroster Check that the air
comes out of the defroster outlets properly and in
sufficient quantity when operating the heater or
air conditioner.
Under the hood and vehicle
The maintenance items listed here should be
checked periodically (for example, each time you
check the engine oil or refuel).
Battery* Check the fluid level in each cell. It
should be between the MAX and MIN lines. Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.
NOTE:
Care should be taken to avoid situations
that can lead to potential battery discharge
and potential no-start conditions such as:
1. Installation or extended use of electronic
accessories that consume battery power
when the engine is not running (Phone chargers, GPS, DVD players, etc.)
8-4 Maintenance and do-it-yourself
2. Vehicle is not driven regularly and/or only
driven short distances. In these cases, the
battery may need to be charged to maintain
battery health.
Power steering fluid level* and lines Check
the level when the fluid is cold, with the engine
off. Check the lines for proper attachment, leaks,
cracks, etc.
Brake fluid level* Make sure that the brake fluid
level is between the MIN and MAX lines on the
reservoir.
Radiator and hoses Check the front of the
radiator and clean off any dirt, insects, leaves,
etc., that may have accumulated. Make sure the
hoses have no cracks, deformation, rot or loose
connections.
Engine coolant level* Check the coolant level
when the engine is cold.
Engine drive belts* Make sure the drive belts
are not frayed, worn, cracked or oily.
Engine oil level* Check the level after parking
the vehicle on a level surface with the engine off.
Wait more than 10 minutes for the oil to drain
back into the oil pan.
Exhaust system Make sure there are no loose
supports, cracks or holes. If the sound of the exhaust seems unusual or there is a smell of exhaust
fumes, immediately have the exhaust system inspected by a NISSAN dealer. For additional information, refer to carbon monoxide warning in the
“Starting and driving” section of this manual.
Fluid leaks Check under the vehicle for fuel, oil,
water or other fluid leaks after the vehicle has been
parked for a while. Water dripping from the air
conditioner after use is normal. If you should notice
any leaks or if gasoline fumes are evident, check for
the cause and have it corrected immediately.
Underbody The underbody is frequently exposed to corrosive substances such as those
used on icy roads or to control dust. It is very
important to remove these substances from the
underbody, otherwise rust may form on the floor
pan, frame, fuel lines and exhaust system. At the
end of winter, the underbody should be thoroughly flushed with plain water, in those areas
where mud and dirt may have accumulated. For
additional information, refer to “Appearance and
care” section of this manual.
Windshield-washer fluid* Check that there is
adequate fluid in the reservoir.
MAINTENANCE PRECAUTIONS
When performing any inspection or maintenance
work on your vehicle, always take care to prevent
serious accidental injury to yourself or damage to
the vehicle. The following are general precautions which should be closely observed.
WARNING
● Park the vehicle on a level surface, apply the parking brake securely and
block the wheels to prevent the vehicle
from moving. Move the shift lever to P
(Park).
● Be sure the ignition switch is in the OFF
or LOCK position when performing any
parts replacement or repairs.
● If you must work with the engine running, keep your hands, clothing, hair
and tools away from moving fans, belts
and any other moving parts.
● It is advisable to secure or remove any
loose clothing and remove any jewelry,
such as rings, watches, etc. before
working on your vehicle.
● Always wear eye protection whenever
you work on your vehicle.
● Your vehicle is equipped with an automatic engine cooling fan. It may come
on at any time without warning, even if
the ignition switch is in the OFF position and the engine is not running. To
avoid injury, always disconnect the
negative battery cable before working
near the fan.
● If you must run the engine in an enclosed space such as a garage, be sure
there is proper ventilation for exhaust
gases to escape.
● Never get under the vehicle while it is
supported only by a jack. If it is necessary to work under the vehicle, support
it with safety stands.
● Keep smoking materials, flame and
sparks away from the fuel tank and
battery.
● The fuel filter or fuel lines should be
serviced by a NISSAN dealer because
the fuel lines are under high pressure
even when the engine is off.
CAUTION
● Do not work under the hood while the
engine is hot. Turn the engine off and
wait until it cools down.
● Avoid contact with used engine oil and
coolant. Improperly disposed engine
oil, engine coolant and/or other vehicle
fluids can damage the environment. Always conform to local regulations for
disposal of vehicle fluid.
● Never leave the engine or continuously
variable transmission related component harnesses disconnected while the
ignition switch is in the ON position.
● Never connect or disconnect the battery
or any transistorized component while
the ignition switch is in the ON position.
This “Maintenance and do-it-yourself” section
gives instructions regarding only those items
which are relatively easy for an owner to perform.
You should be aware that incomplete or improper
servicing may result in operating difficulties or
excessive emissions, and could affect warranty
coverage. If in doubt about any servicing,
have it done by a NISSAN dealer.
Maintenance and do-it-yourself 8-5
ENGINE COMPARTMENT CHECK
LOCATIONS
VQ35DE engine
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Power steering fluid reservoir
Engine coolant reservoir
Drive belt location
Fuse block
Engine oil filler cap
Brake fluid reservoir
Air cleaner
Fuse block
Fuse/fusible link box
Fuse/fusible link box
Battery
Engine oil dipstick
Radiator cap
Windshield-washer fluid reservoir
NOTE:
Engine cover removed for clarity.
LDI2498
8-6 Maintenance and do-it-yourself
ENGINE COOLING SYSTEM
The engine cooling system is filled at the factory
with a pre-diluted mixture of 50% Genuine
NISSAN Long Life Antifreeze/Coolant (blue) and
50% water to provide year-round antifreeze and
coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary.
WARNING
● Never remove the radiator or coolant
reservoir cap when the engine is hot.
Wait until the engine and radiator cool
down. Serious burns could be caused
by high pressure fluid escaping from
the radiator. For additional information,
refer to precautions in “If your vehicle
overheats” found in the “In case of
emergency” section of this manual.
● The radiator is equipped with a pressure type radiator cap. To prevent engine damage, use only a Genuine
NISSAN radiator cap.
CAUTION
● Never use any cooling system additives
such as radiator sealer. Additives may
clog the cooling system and cause damage to the engine, transmission and/or
cooling system.
● When adding or replacing coolant, be
sure to use only Genuine NISSAN Long
Life Antifreeze/Coolant (blue) or
equivalent. Genuine NISSAN Long Life
Antifreeze/Coolant (blue) is pre-diluted
to provide antifreeze protection to -34°
F (-37° C). If additional freeze protection
is needed due to weather where you
operate your vehicle, add Genuine
NISSAN Long Life Antifreeze/Coolant
(blue) concentrate following the directions on the container. If an equivalent
coolant other than Genuine NISSAN
Long Life Antifreeze/Coolant (blue) is
used, follow the coolant manufacturer’s
instructions to maintain minimum antifreeze protection to -34° F (-37° C). The
use of other types of coolant solutions
other than Genuine NISSAN Long Life
Antifreeze/Coolant (blue) or equivalent
may damage the engine cooling
system.
● The life expectancy of the factory-fill
coolant is 105,000 miles (168,000 km) or
7 years. Mixing any other type of coolant other than Genuine NISSAN Long
Life Antifreeze/Coolant (blue), including Genuine NISSAN Long Life
Antifreeze/Coolant (green), or the use
of non-distilled water will reduce the
life expectancy of the factory-fill coolant. For additional information, refer to
the NISSAN Service and Maintenance
Guide.
Maintenance and do-it-yourself 8-7
This vehicle contains Genuine NISSAN Long Life
Antifreeze/Coolant (blue). The life expectancy of
the factory-fill coolant is 105,000 miles
(168,000 km) or 7 years. Mixing any other type of
coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant.
For additional information, refer to the NISSAN
Service and Maintenance Guide.
For additional information on the location of the
engine coolant reservoir, refer to “Engine compartment check locations” in this section.
LDI2519
CHECKING ENGINE COOLANT
LEVEL
Check the coolant level in the reservoir when
the engine is cold. If the coolant level is below
1 , add coolant to the MAX level
the MIN level 䊊
2 . If the reservoir is empty, check the coolant
䊊
level in the radiator when the engine is cold. If
there is insufficient coolant in the radiator, fill the
radiator with coolant up to the filler opening and
2 .
also add it to the reservoir up to the MAX level 䊊
8-8 Maintenance and do-it-yourself
If the cooling system frequently requires
coolant, have it checked by a NISSAN
dealer.
WARNING
● To avoid the danger of being scalded,
never change the coolant when the engine is hot.
● Never remove the radiator or engine
coolant reservoir cap when the engine
is hot. Serious burns could be caused by
high pressure fluid escaping from the
radiator.
● Avoid direct skin contact with used
coolant. If skin contact is made, wash
thoroughly with soap or hand cleaner as
soon as possible.
CHANGING ENGINE COOLANT
● Keep coolant out of the reach of children and pets.
A NISSAN dealer can change the engine coolant.
The service procedure can be found in the
NISSAN Service Manual.
Engine coolant must be disposed of properly.
Check your local regulations.
Improper servicing can result in reduced
heater performance and engine overheating.
ENGINE OIL
CAUTION
Oil level should be checked regularly. Operating the engine with an insufficient
amount of oil can damage the engine, and
such damage is not covered by warranty.
LDI2087
CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature.
3. Turn off the engine. Wait more than
10 minutes for the oil to drain back into
the oil pan.
4. Remove the dipstick and wipe it clean. Reinsert it all the way.
WDI0214
5. Remove the dipstick again and check the oil
level. It should be between the H (High) and
B . This is the normal operL (Low) marks 䊊
ating oil level range. If the oil level is below
A , remove the oil filler cap
the L (Low) mark 䊊
and pour recommended oil through the
opening. Do not fill oil level above H
C.
(High) mark 䊊
6. Recheck the oil level with the dipstick.
It is normal to add some oil between oil
maintenance intervals or during the
break-in period, depending on the severity
of operating conditions.
Maintenance and do-it-yourself 8-9
A by turning it
3. Remove the oil filler cap 䊊
counterclockwise.
4. Place a large drain pan under the drain plug
B.
䊊
B with a wrench by
5. Remove the drain plug 䊊
turning it counterclockwise and completely
drain the oil.
If the oil filter is to be changed, remove and
replace it at this time. For additional information, refer to “Changing engine oil filter” in
this section.
● Waste oil must be disposed of properly.
● Check your local regulations.
WARNING
● Prolonged and repeated contact with
used engine oil may cause skin cancer.
LDI2622
CHANGING ENGINE OIL
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature, then turn it off.
8-10 Maintenance and do-it-yourself
● Try to avoid direct skin contact with
used oil. If skin contact is made, wash
thoroughly with soap or hand cleaner as
soon as possible.
● Keep used engine oil out of reach of
children.
CAUTION
Be careful not to burn yourself. The engine
oil may be hot.
6. Clean and reinstall the drain plug and a new
washer. Securely tighten the drain plug with
a wrench. Do not use excessive force.
Drain plug tightening torque:
34 N·m (25 ft-lb)
7. Refill engine with recommended oil through
the oil filler opening, then install the oil filler
cap securely.
For additional information, refer to “Recommended fluids/lubricants and capacities” in
the “Technical and consumer information” section of this manual for drain and refill capacity.
The drain and refill capacity depends on the
oil temperature and drain time. Use these
specifications for reference only. Always use
the dipstick to determine when the proper
amount of oil is in the engine.
8. Start the engine. Check for leakage around
the drain plug and oil filter. Correct as required.
9. Turn the engine off and wait more than
10 minutes. Check the oil level with the
dipstick. Add engine oil if necessary.
A from the right engine pro4. Remove pins 䊊
tector located inside right wheel well, reB with an
move protector. Remove oil filter 䊊
oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it
by hand.
8. Start the engine and check for leakage
around the oil filter. Correct as required.
9. Turn the engine off and wait more than
10 minutes. Check the oil level. Add engine
oil if necessary.
CAUTION
Be careful not to burn yourself. The engine
oil may be hot.
5. Wipe the engine oil filter sealing surface with
a clean rag.
CAUTION
● Be sure to remove any old gasket
material remaining on the sealing
surface of the engine. Failure to do
so could lead to an oil leak and engine damage.
LDI2517
CHANGING ENGINE OIL FILTER
● The dipstick must be inserted in
place to prevent oil spillage from the
dipstick hole when filling the engine
with oil.
1. Park the vehicle on a level surface and apply
the parking brake.
6. Coat the gasket on the new filter with clean
engine oil.
2. Turn the engine off.
7. Screw on the oil filter until a slight resistance
is felt, then tighten an additional 2/3 turn.
B.
3. Place a large drain pan under the oil filter 䊊
Maintenance and do-it-yourself 8-11
CONTINUOUSLY VARIABLE
TRANSMISSION (CVT) FLUID
POWER STEERING FLUID
CAUTION
CAUTION
● NISSAN recommends using Genuine
NISSAN CVT Fluid NS-3 ONLY in
NISSAN CVTs. Do not mix with other
fluids.
● DO NOT OVERFILL.
● Use of a power steering fluid other than
Genuine NISSAN E-PSF will prevent the
power steering system from operating
properly.
● Do not use Automatic transmission
fluid (ATF) or Manual transmission fluid
in a NISSAN CVT, as it may damage the
CVT. Damage caused by the use of fluids other than as recommended is not
covered under NISSAN’s New Vehicle
Limited Warranty.
● Using fluids that are not equivalent to
Genuine NISSAN CVT Fluid NS-3 may
also damage the CVT. Damage caused
by the use of fluids other than as recommended is not covered under NISSAN’s
New Vehicle Limited Warranty.
When checking or replacement of CVT fluid is
required, we recommend your NISSAN dealer for
servicing.
● Power steering fluid is poisonous and
should be stored carefully in marked
containers out of the reach of children.
LDI2520
Check the fluid level in the reservoir.
The fluid level should be checked when the fluid
is cold at fluid temperatures of 32 to 86ºF (0 to
30ºC). The fluid level can be checked with the
level gauge which is attached to the cap. To
check the fluid level, remove the cap. The fluid
1 and MIN 䊊
2
level should be between the MAX 䊊
lines.
2 line, add Genuine
If the fluid is below the MIN 䊊
NISSAN E-PSF. Remove the cap and fill through
the opening.
8-12 Maintenance and do-it-yourself
BRAKE FLUID
WINDSHIELD-WASHER FLUID
WARNING
● Use only new fluid from a sealed container. Old, inferior or contaminated
fluid may damage the brake system.
The use of improper fluids can damage
the brake system and affect the vehicle’s stopping ability.
● Clean the filler cap before removing.
● Brake fluid is poisonous and should be
stored carefully in marked containers
out of reach of children.
CAUTION
Do not spill the fluid on any painted surfaces. This will damage the paint. If fluid is
spilled, immediately wash the surface with
water.
LDI2147
Check the fluid level in the reservoir. If the brake
B , the brake warning
fluid is below the MIN line 䊊
light will illuminate. Add brake fluid up to the MAX
A . For additional information, refer to “Recline 䊊
ommended fluids/lubricants and capacities” in
the “Technical and consumer information” section of this manual for the recommended type of
brake fluid.
If the brake fluid must be added frequently, the
brake system should be thoroughly checked by a
NISSAN dealer.
LDI2521
WINDSHIELD-WASHER FLUID
RESERVOIR
Fill the windshield-washer fluid reservoir periodically. Add windshield-washer fluid when the low
windshield-washer fluid warning light comes on.
To fill the windshield-washer fluid reservoir, lift
the cap off the reservoir and pour the windshieldwasher fluid into the reservoir opening.
Add a washer solvent to the washer for better
cleaning. In the winter season, add a windshieldwasher antifreeze. Follow the manufacturer’s instructions for the mixture ratio.
Maintenance and do-it-yourself 8-13
BATTERY
Refill the reservoir more frequently when driving
conditions require an increased amount of
windshield-washer fluid.
● Keep the battery surface clean and dry.
Clean the battery with a solution of baking
soda and water.
Recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze
or equivalent.
● Make certain the terminal connections are
clean and securely tightened.
CAUTION
● If the vehicle is not to be used for 30 days or
longer, disconnect the negative (-) battery
terminal cable to prevent discharge.
● Do not substitute engine antifreeze
coolant for windshield-washer fluid.
This may result in damage to the paint.
NOTE:
● Do not fill the windshield-washer fluid
reservoir with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates
may permanently stain the grille if
spilled while filling the windshieldwasher fluid reservoir.
Care should be taken to avoid situations
that can lead to potential battery discharge
and potential no-start conditions such as:
1. Installation or extended use of electronic
accessories that consume battery power
when the engine is not running (Phone chargers, GPS, DVD players, etc).
● Pre-mix washer fluid concentrates with
water to the manufacturer’s recommended levels before pouring the fluid
into the windshield-washer fluid reservoir. Do not use the windshield-washer
fluid reservoir to mix the washer fluid
concentrate and water.
2. Vehicle is not driven regularly and/or only
driven short distances. In these cases, the
battery may need to be charged to maintain
battery health.
8-14 Maintenance and do-it-yourself
WARNING
● Do not expose the battery to flames, an
electrical spark or a cigarette. Hydrogen
gas generated by the battery is explosive. Explosive gases can cause blindness or injury. Do not allow battery fluid
to contact your skin, eyes, fabrics or
painted surfaces. Sulfuric acid can
cause blindness or injury. After touching a battery or battery cap, do not
touch or rub your eyes. Thoroughly
wash your hands. If the acid contacts
your eyes, skin or clothing, immediately
flush with water for at least 15 minutes
and seek medical attention.
● Do not operate the vehicle if the fluid in
the battery is low. Low battery fluid can
cause a higher load on the battery
which can generate heat, reduce battery
life, and in some cases lead to an
explosion.
● When working on or near a battery, always wear suitable eye protection and
remove all jewelry.
● Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after handling.
● Keep battery out of the reach of
children.
● Do not tip the battery. Keep the vent
caps tight and the battery level.
WDI0224
1. Remove the vent caps with a screwdriver as
shown. Use a cloth to protect the battery
case.
LDI0302
2. Check the fluid level in each cell. If it is
necessary to add fluid, add only distilled
water to bring the level up to the bottom of
the filler opening. Do not overfill. Reinstall
the vent caps.
Maintenance and do-it-yourself 8-15
VARIABLE VOLTAGE CONTROL
SYSTEM (if so equipped)
Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.
Your vehicle is equipped with a variable voltage
control system. This system measures the
amount of electrical discharge from the battery
and controls voltage generated by the generator.
JUMP STARTING
The current sensor is located near the battery
along the negative battery cable. If you add electrical accessories to your vehicle, be sure to
ground them to a suitable body ground such as
the frame or engine block area.
If jump starting is necessary, refer to “Jump starting” in the “In case of emergency” section of this
manual. If the engine does not start by jump
starting, the battery may have to be replaced.
Contact a NISSAN dealer.
LDI2132
CAUTION
● Do not ground accessories directly to
the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not
charge completely.
● Use electrical accessories with the engine running to avoid discharging the
vehicle battery.
8-16 Maintenance and do-it-yourself
DRIVE BELT
SPARK PLUGS
2. Have the belt checked regularly for condition and tension in accordance with the
maintenance schedule found in your
“NISSAN Service and Maintenance Guide”.
LDI2099
1.
2.
3.
4
Drive belt automatic tensioner pulley
Generator pulley
Air conditioner compressor pulley
Crankshaft pulley
WARNING
Be sure the ignition key is in the OFF or
LOCK position before servicing drive belt.
The engine could rotate unexpectedly.
1. Visually inspect the belt for signs of unusual
wear, cuts, fraying or looseness. If the belt is
in poor condition or is loose, have it replaced
or adjusted by a NISSAN dealer.
SDI1895
REPLACING SPARK PLUGS
Iridium-tipped spark plugs
A
It is not necessary to replace iridium-tipped 䊊
spark plugs as frequently as conventional type
spark plugs because they last much longer. Follow the maintenance log shown in the “NISSAN
Service and Maintenance Guide”. Do not service
iridium-tipped spark plugs by cleaning or regapping.
● Always replace spark plugs with recommended or equivalent ones.
Maintenance and do-it-yourself 8-17
AIR CLEANER
NOTE:
WARNING
After installing a new air cleaner, make
sure the air cleaner cover is seated in the
1 .
housing and latch the clips 䊊
Be sure the engine and ignition switch are
off and that the parking brake is engaged
securely.
WARNING
CAUTION
Be sure to use the correct socket to remove the spark plugs. An incorrect socket
can damage the spark plugs.
If replacement is required, see a NISSAN dealer
for assistance.
LDI2467
Clean and replace the air cleaner filter according
to the maintenance log shown in the “NISSAN
Service and Maintenance Guide”. When replacing the filter, wipe the inside of the air cleaner filter
housing and the cover with a damp cloth.
To remove the air cleaner filter:
1 and move the air
1. Unlatch the clips 䊊
cleaner cover upward.
Remove the air cleaner filter and wipe the inside
of the air cleaner filter housing and the cover with
a damp cloth.
● Operating the engine with the air cleaner
removed can cause you or others to be
burned. The air cleaner not only cleans
the air, it stops the flame if the engine
backfires. If it isn’t there, and the engine
backfires, you could be burned. Do not
drive with the air cleaner removed, and
be careful when working on the engine
with the air cleaner removed.
● Never pour fuel into the throttle body or
attempt to start the engine with the air
cleaner removed. Doing so could result
in serious injury.
IN-CABIN MICROFILTER
The in-cabin microfilter restricts the entry of airborne dust and pollen particles and reduces
some objectionable outside odors. The filter is
located behind the glove box. Refer to the
“NISSAN Service and Maintenance Guide” for
change intervals.
If replacement is required, see a NISSAN dealer.
8-18 Maintenance and do-it-yourself
WINDSHIELD WIPER BLADES
6. Return the wiper to its original position and
release it until it has made contact with the
windshield.
CLEANING
If your windshield is not clear after using the
windshield-washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
CAUTION
● After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
Clean the outside of the windshield with a washer
solution or a mild detergent. Your windshield is
clean if beads do not form when rinsing with clear
water.
Clean each blade by wiping it with a cloth soaked
in a washer solution or a mild detergent. Then
rinse the blades with clear water. If your windshield is still not clear after cleaning the blades
and using the wiper, replace the blades.
CAUTION
Worn windshield wiper blades can damage the windshield and impair driver
vision.
● Make sure the wiper blades contact the
glass; otherwise the arms may be damaged from wind pressure.
LDI2475
REPLACING
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
B then move the wiper
2. Push the release tab 䊊
blade down the wiper arm to remove.
C.
3. Remove the wiper blade from wiper arm 䊊
4. Insert the new wiper blade onto the wiper
arm until it clicks into place.
5. Rotate the wiper blade so the dimple is in the
groove.
Maintenance and do-it-yourself 8-19
BRAKES
Rear window wiper blade
Contact a NISSAN dealer if checking or replacement is required.
If the brakes do not operate properly, have the
brakes checked by a NISSAN dealer.
Self-adjusting brakes
Your vehicle is equipped with self-adjusting
brakes.
The front and rear disc-type brakes self-adjust
every time the brake pedal is applied.
WARNING
See a NISSAN dealer for a brake system
check if the brake pedal height does not
return to normal.
Brake pad wear indicators
WDI0570
If you wax the surface of the hood, be careful not
to let wax get into the windshield-washer nozzle
A . This may cause clogging or improper
䊊
windshield-washer operation. If wax gets into the
B.
nozzle, remove it with a needle or small pin 䊊
8-20 Maintenance and do-it-yourself
The disc brake pads on your vehicle have audible
wear indicators. When a brake pad requires replacement, a high pitched scraping or screeching sound will be heard when the vehicle is in
motion. The noise will be heard whether or not the
brake pedal is depressed. Have the brakes
checked as soon as possible if the wear indicator
sound is heard.
Under some driving or climate conditions, occasional brake squeak, squeal or other noise may
be heard. Occasional brake noise during light to
moderate stops is normal and does not affect the
function or performance of the brake system.
FUSES
Proper brake inspection intervals should
be followed. For additional information regarding brake inspections, refer to the appropriate
maintenance schedule information in the
“NISSAN Service and Maintenance Guide”.
LDI2464
ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
3. Remove the fuse box cover by pushing the
tab and lifting the cover up.
4. Remove the fuse with the fuse puller. The
fuse puller is located in the fuse block in the
passenger compartment.
If any electrical equipment does not come on,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Open the engine hood.
Maintenance and do-it-yourself 8-21
LDI0456
A , replace it with a new
5. If the fuse is open 䊊
B.
fuse 䊊
6. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
Fusible links
If the electrical equipment does not operate and
fuses are in good condition, check the fusible
links. If any of these fusible links are melted,
replace with only Genuine NISSAN parts.
LDI2092
PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Pull the fuse box cover to remove.
3. Remove the fuse with the fuse puller.
8-22 Maintenance and do-it-yourself
LDI0456
A , replace it with an
4. If the fuse is open 䊊
B.
equivalent good fuse 䊊
5. Reverse step 2 to reinstall the box cover.
6. If a new fuse also opens, have the electrical
system checked and repaired by a NISSAN
dealer.
BATTERY REPLACEMENT
How to remove the extended storage
switch:
1. To remove the extended storage switch, be
sure the ignition switch is in the OFF or
LOCK position.
CAUTION
Be careful not to allow children to swallow
the battery or removed parts.
2. Be sure the headlight switch is in the OFF
position.
3. Remove the fuse box cover.
1 found on each
4. Pinch the locking tabs 䊊
side of the storage switch.
LDI2035
5. Pull the storage switch straight out from the
2 .
fuse box 䊊
Extended storage switch
If any electrical equipment does not operate,
remove the extended storage switch and check
for an open fuse.
NOTE:
The extended storage switch is used for
long term vehicle storage. Even if the extended storage switch is broken it is not
necessary to replace it. Replace only the
open fuse in the switch with a new fuse.
Maintenance and do-it-yourself 8-23
NISSAN INTELLIGENT KEY®
Replace the battery in the Intelligent Key as follows:
1. Remove the mechanical key from the Intelligent Key.
A into the slit 䊊
B
2. Insert a small screwdriver 䊊
of the corner and twist it to separate the
upper part from the lower part. Use a cloth to
protect the casing.
3. Replace the battery with a new one.
Recommended battery: CR2025 or equivalent.
● Do not touch the internal circuit and electric terminals as doing so could cause a
malfunction.
● Hold the battery by the edges. Holding
the battery across the contact points will
seriously deplete the storage capacity.
● Make sure that the + side faces the bottom of the case.
SDI1867
8-24 Maintenance and do-it-yourself
WDI0535
C
4. Close the lid securely as illustrated with 䊊
D.
and 䊊
5. Operate the buttons to check the operation.
See a NISSAN dealer if you need assistance for
replacement.
FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference re-
LIGHTS
ceived, including interference that may
cause undesired operation.
HEADLIGHTS
Replacing the halogen headlight bulb
Note: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
If bulb replacement is required, see a NISSAN
dealer.
For Canada:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that
may cause undesired operation of the device.
CAUTION
● Aiming is not necessary after replacing
the bulb. When aiming adjustment is
necessary, contact a NISSAN dealer.
● Do not leave the headlight assembly
open without a bulb installed for a long
period of time. Dust, moisture, smoke,
etc. entering the headlight body may
affect bulb performance. Remove the
bulb from the headlight assembly just
before a replacement bulb is installed.
● Only touch the base when handling the
bulb. Never touch the glass envelope.
Touching the glass could significantly
affect bulb life and/or headlight
performance.
● High pressure halogen gas is sealed
inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or the bulb is dropped.
● Use the same number and wattage as
shown in the chart.
Fog may temporarily form inside the lenses of the
exterior lights in the rain or in a car wash. A
temperature difference between the inside and
the outside of the lens causes the fog. This is not
a malfunction. If large drops of water collect
inside the lens, contact a NISSAN dealer.
FOG LIGHTS (if so equipped)
Replacing the fog light bulb
If bulb replacement is required, see a NISSAN
dealer.
CAUTION
● High pressure halogen gas is sealed
inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or the bulb is dropped.
● When handling the bulb, do not touch
the glass envelope.
● Use the same number and wattage as
originally installed as shown in the
chart.
● Do not leave the bulb out of the fog light
for a long period of time as dust, moisture and smoke may enter the fog light
body and affect the performance of the
fog light.
Maintenance and do-it-yourself 8-25
EXTERIOR AND INTERIOR LIGHTS
Item
Headlight assembly*
High
Low
Park
Turn
Sidemarker
Front fog lights (if so equipped)
Daytime running lights (Canada only)
Map light*
Footwell light (if so equipped)
Personal lights
Glove box light*
Step light (if so equipped)
Courtesy light*
Vanity mirror light (if so equipped)
Cargo light
Clearance light
High-mounted stop light*
Rear combination light
Tail/Stop*
Turn
Rear sidemarker
Backup (reversing)*
License plate light*
Wattage (W)
Bulb No.
60
55
5
21
5
55
19
—
3.4
8
8
3.4
—
2
—
—
—
HB3
H11
W5W
WY21W
WY5W
H11
PS19W
—
158
P1Y
158
194
—
—
AL1X
—
—
5/21
21
5
12
5
7443
WY21W
W5W
W16W
W5W
* See a NISSAN dealer for replacement.
Always check with the Parts Department at a NISSAN dealer for the latest parts information.
LDI2510
8-26 Maintenance and do-it-yourself
1.
2
3
4.
5.
6.
7.
8.
Headlight assembly
Map light
Personal light
Fog light (if so equipped)/Daytime running light (Canada only)
Cargo light
Courtesy light
License plate light
Rear combination light
Indicates bulb removal
Indicates bulb installation
WDI0263
Replacement procedures
All other lights are either type A, B, C or D. When
replacing a bulb, first remove the lens, lamp
and/or cover.
Maintenance and do-it-yourself 8-27
WDI0670
Personal lights
Use a cloth to protect the housing and suitable
1 to remove lens.
tool 䊊
8-28 Maintenance and do-it-yourself
LDI2096
Vanity mirror
1 to protect the housing and suitUse a cloth 䊊
able tool to remove lens.
WDI0206
Cargo light
1 to protect the housing and suitUse a cloth 䊊
able tool to remove lens.
WHEELS AND TIRES
If you have a flat tire, refer to “Flat tire” in
the “In case of emergency” section of this
manual.
TIRE PRESSURE
Tire Pressure Monitoring System
(TPMS)
WARNING
the display screen by sending a signal
from a sensor that is installed in each
wheel.
The TPMS will activate only when the
vehicle is driven at speeds above 16 MPH
(25 km/h). Also, this system may not detect a sudden drop in tire pressure (for
example a flat tire while driving).
Radio waves could aversely effect
electric medical equipment. Those
who use a pacemaker should contact the electric medical equipment
manufacturer for the possible influences before use.
For additional information, refer to “Low
tire pressure warning light” in the “Instruments and controls” section and “Flat tire”
in the “In case of emergency” section.
This vehicle is equipped with the Tire
Pressure Monitoring System (TPMS). It
monitors tire pressure of all tires except
the spare. When the low tire pressure
warning light is lit and the Tire Pressure
Low - Add Air warning appears in the
vehicle information display, one or more of
your tires is significantly under-inflated. If
equipped, the system also displays pressure of all tires (except the spare tire) on
Check the tire pressures (including the
spare) often and always prior to long distance trips. The recommended tire pressure specifications are shown on the
F.M.V.S.S./C.M.V.S.S. certification label
or the Tire and Loading Information label
under the “Cold Tire Pressure” heading.
The Tire and Loading Information label is
affixed to the driver side center pillar. Tire
pressures should be checked regularly
because:
Tire inflation pressure
● Most tires naturally lose air over time.
● Tires can lose air suddenly when
driven over potholes or other objects
or if the vehicle strikes a curb while
parking.
The tire pressures should be checked
when the tires are cold. The tires are
considered COLD after the vehicle has
been parked for 3 or more hours, or driven
less than 1 mile (1.6 km) at moderate
speeds.
The TPMS with Easy Fill Tire Alert provides visual and audible signals outside
the vehicle for inflating the tires to the
recommended COLD tire pressure. For
additional information, refer to “TPMS
with Easy Fill Tire Alert” in the “Starting
and driving” section.
Incorrect tire pressure, including under inflation, may adversely affect
tire life and vehicle handling.
Maintenance and do-it-yourself 8-29
WARNING
● Improperly inflated tires can fail
suddenly and cause an accident.
● The Gross Vehicle Weight Rating
(GVWR) is located on the
F.M.V.S.S./C.M.V.S.S. certification label. The vehicle weight capacity is indicated on the Tire and
Loading Information label. Do
not load your vehicle beyond this
capacity. Overloading your vehicle may result in reduced tire
life, unsafe operating conditions
due to premature tire failure, or
unfavorable handling characteristics and could also lead to a
serious accident. Loading beyond
the specified capacity may also
result in failure of other vehicle
components.
● Before taking a long trip, or
whenever you heavily load your
vehicle, use a tire pressure gauge
to ensure that the tire pressures
are at the specified level.
8-30 Maintenance and do-it-yourself
● For additional information regarding tires, refer to “Important
Tire Safety Information” (US) or
“Tire
Safety
Information”
(Canada) in the Warranty Information Booklet.
4
䊊
5
䊊
6
䊊
Tire size - refer to “Tire labeling” in
this section.
Spare tire size.
Vehicle load limit: Refer to “Vehicle
loading information” in the “Technical
and consumer information” section.
LDI2083
Tire and loading information label
1
䊊
2
䊊
Seating capacity: The maximum number of occupants that can be seated
in the vehicle.
Original tire size: The size of the tires
originally installed on the vehicle at
the factory.
3
䊊
Cold tire pressure: Inflate the tires to
this pressure when the tires are cold.
Tires are considered COLD after the
vehicle has been parked for 3 or more
hours, or driven less than 1 mile
(1.6 km) at moderate speeds. The
recommended cold tire inflation is set
by the manufacturer to provide the
best balance of tire wear, vehicle
handling, driveability, tire noise, etc.,
up to the vehicle’s GVWR.
Maintenance and do-it-yourself 8-31
4. Read the tire pressure on the gauge
stem and compare to the specification shown on the Tire and Loading
Information label.
5. Add air to the tire as needed. If too
much air is added, press the core of
the valve stem briefly with the tip of
the gauge stem to release pressure.
Recheck the pressure and add or
release air as needed.
6. Install the valve stem cap.
LDI0393
Checking tire pressure
7. Check the pressure of all other tires,
including the spare.
1. Remove the valve stem cap from the
tire.
Size
2. Press the pressure gauge squarely
onto the valve stem. Do not press too
hard or force the valve stem sideways, or air will escape. If the hissing
sound of air escaping from the tire is
heard while checking the pressure,
reposition the gauge to eliminate this
leakage.
Front and Rear
Original Tire:
235/65R18
Front and Rear
Original Tire:
235/55R20
Spare Tire:
T165/90D18
3. Remove the gauge.
8-32 Maintenance and do-it-yourself
Cold Tire Inflation
Pressure
33 PSI, 230 kPa
33 PSI, 230 kPa
60 PSI, 420 kPa
WDI0394
Example
TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the
sidewall of all tires. This information identifies and describes the fundamental
characteristics of the tire and also provides the tire identification number (TIN)
for safety standard certification. The TIN
can be used to identify the tire in case of a
recall.
7. H: Tire speed rating. You should not
drive the vehicle faster than the tire
speed rating.
WDI0395
Example
1 Tire size (example: P215/65R15 95H)
䊊
1. P: The “P” indicates the tire is designed for passenger vehicles (not all
tires have this information).
2. Three-digit number (215): This number gives the width in millimeters of
the tire from sidewall edge to sidewall edge.
3. Two-digit number (65): This number,
known as the aspect ratio, gives the
tire’s ratio of height to width.
4. R: The “R” stands for radial.
5. Two-digit number (15): This number
is the wheel or rim diameter in inches.
6. Two- or three-digit number (95): This
number is the tire’s load index. It is a
measurement of how much weight
each tire can support. You may not
find this information on all tires because it is not required by law.
Maintenance and do-it-yourself 8-33
ers also must indicate the materials in the
tire, which include steel, nylon, polyester
and others.
4 Maximum permissible inflation pres䊊
sure
This number is the greatest amount of air
pressure that should be put in the tire. Do
not exceed the maximum permissible inflation pressure.
5 Maximum load rating
䊊
LDI2786
Example
2 TIN (Tire Identification Number) for a
䊊
new tire (example: DOT XX XX XXX
XXXX)
1. DOT: Abbreviation for the “Department Of Transportation”. The symbol
can be placed above, below or to the
left or right of the Tire Identification
Number.
2. Two-digit code:
identification mark.
Manufacturer’s
3. Two-digit code: Tire size.
8-34 Maintenance and do-it-yourself
4. Three-digit code: Tire type code
(Optional).
5. Four numbers represent the week
and year the tire was built. For example, the numbers 3103 means the
31st week of 2003. If these numbers
are missing then look on the other
sidewall of the tire.
3 Tire ply composition and material
䊊
The number of layers or plies of rubbercoated fabric in the tire. Tire manufactur-
This number indicates the maximum load
in kilograms and pounds that can be carried by the tire. When replacing the tires
on the vehicle, always use a tire that has
the same load rating as the factory installed tire.
6 Term of “tubeless” or “tube type”
䊊
Indicates whether the tire requires an inner tube (“tube type”) or not (“tubeless”).
7 The word “radial”
䊊
The word “radial” is shown if the tire has
radial structure.
8 Manufacturer or brand name
䊊
Manufacturer or brand name is shown.
Other Tire-related Terminology
In addition to the many terms that are
defined throughout this section, Intended
Outboard Sidewall is (1) the sidewall that
contains a whitewall, bears white lettering
or bears manufacturer, brand, and/or
model name molding that is higher or
deeper than the same molding on the
other sidewall of the tire, or (2) the outward facing sidewall of an asymmetrical
tire that has a particular side that must
always face outward when mounted on a
vehicle.
TYPES OF TIRES
WARNING
● When changing or replacing tires, be
sure all four tires are of the same type
(i.e., Summer, All Season or Snow) and
construction. A NISSAN dealer may be
able to help you with information about
tire type, size, speed rating and
availability.
● Replacement tires may have a lower
speed rating than the factory equipped
tires, and may not match the potential
maximum vehicle speed. Never exceed
the maximum speed rating of the tire.
● Replacing tires with those not originally
specified by NISSAN could affect the
proper operation of the low tire pressure warning system.
● For additional information regarding
tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.
All season tires
NISSAN specifies All Season tires on some models to provide good performance all year, including snowy and icy road conditions. All Season
tires are identified by ALL SEASON and/or M&S
on the tire sidewall. Snow tires have better snow
traction than All Season tires and may be more
appropriate in some areas.
Summer tires
NISSAN specifies summer tires on some models
to provide superior performance on dry roads.
Summer tire performance is substantially re-
duced in snow and ice. Summer tires do not have
the tire traction rating “M&S” on the tire sidewall.
If you plan to operate your vehicle in snowy or icy
conditions, NISSAN recommends the use of
SNOW tires or ALL SEASON tires on all four
wheels.
Snow tires
If snow tires are needed, it is necessary to select
tires equivalent in size and load rating to the
original equipment tires. If you do not, it can
adversely affect the safety and handling of your
vehicle.
Generally, snow tires have lower speed ratings
than factory equipped tires and may not match
the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire.
If you install snow tires, they must be the same
size, brand, construction and tread pattern on all
four wheels.
For additional traction on icy roads, studded tires
may be used. However, some U.S. states and
Canadian provinces prohibit their use. Check
local, state and provincial laws before installing
studded tires. Skid and traction capabilities of
studded snow tires on wet or dry surfaces may be
poorer than that of non-studded snow tires.
Maintenance and do-it-yourself 8-35
TIRE CHAINS
CAUTION
Tire chains/cables should not be installed
on 235/55R20 size tires. Installation of the
tire chains/cables on 235/55R20 size tires
will cause damage to the vehicle. If you
plan to use tire chains/cables, you should
install 235/65R18 size tires on your
vehicle.
Use of tire chains may be prohibited according to
location. Check the local laws before installing
tire chains. When installing tire chains, make sure
they are the proper size for the tires on your
vehicle and are installed according to the chain
manufacturer’s suggestions. Use only SAE
class “S” chains. Class “S” chains are used on
vehicles with restricted tire to vehicle clearance.
Vehicles that can use Class “S” chains are designed to meet the minimum clearances between
the tire and the closest vehicle suspension or
body component required to accommodate the
use of a winter traction device (tire chains or
cables). The minimum clearances are determined
using the factory equipped tire size. Other types
may damage your vehicle. Use chain tensioners
when recommended by the tire chain manufacturer to ensure a tight fit. Loose end links of the
tire chain must be secured or removed to prevent
the possibility of whipping action damage to the
8-36 Maintenance and do-it-yourself
fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your
vehicle may be damaged and/or vehicle handling
and performance may be adversely affected.
Do not use tire chains on dry roads. Driving with
chains in such conditions can cause damage to
the various mechanisms of the vehicle due to
some overstress.
WDI0258
CHANGING WHEELS AND TIRES
Tire rotation
NISSAN recommends rotating the tires
every 5,000 miles (8,000 km).
Refer to “Flat tire” in the “In case of emergency” section of this manual for tire replacing procedures.
As soon as possible, tighten the
wheel nuts to the specified torque
with a torque wrench.
Wheel nut tightening torque:
83 ft-lb (113 N·m)
● The original tires have built-in
tread wear indicators. When the
wear indicators are visible, the
tire(s) should be replaced.
The wheel nuts must be kept tightened to specifications at all times. It
is recommended that wheel nuts be
tightened to specification at each
tire rotation interval.
● Tires degrade with age and use.
Have tires, including the spare,
over 6 years old checked by a
qualified technician because
some tire damage may not be obvious. Replace the tires as necessary to prevent tire failure and
possible personal injury.
WARNING
● After rotating the tires, check and
adjust the tire pressure.
● Retighten the wheel nuts when
the vehicle has been driven for
600 miles (1,000 km) (also in
cases of a flat tire, etc.).
● Do not include the spare tire in
the tire rotation.
● For additional information regarding tires, refer to “Important
Tire Safety Information” (US) or
“Tire
Safety
Information”
(Canada) in the Warranty Information Booklet.
WDI0259
Tire wear and damage
1. Wear indicator
2. Location mark
WARNING
● Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread.
If excessive wear, cracks, bulging
or deep cuts are found, the tire(s)
should be replaced.
● Improper service of the spare tire
may result in serious personal injury. If it is necessary to repair the
spare tire, contact a NISSAN
dealer.
● For additional information regarding tires, refer to “Important
Tire Safety Information” (US) or
“Tire
Safety
Information”
(Canada) in the Warranty Information Booklet.
Maintenance and do-it-yourself 8-37
Replacing wheels and tires
When replacing a tire, use the same size, tread
design, speed rating and load carrying capacity
as originally equipped. Recommended types and
sizes are shown in “Wheels and tires” in the
“Technical and consumer information” section of
this manual.
WARNING
● The use of tires other than those recommended or the mixed use of tires of
different brands, construction (bias,
bias-belted or radial), or tread patterns
can adversely affect the ride, braking,
handling, VDC system, ground clearance, body-to-tire clearance, tire chain
clearance, speedometer calibration,
headlight aim and bumper height.
Some of these effects may lead to accidents and could result in serious personal injury.
● If your vehicle was originally equipped
with 4 tires that were the same size and
you are only replacing 2 of the 4 tires,
install the new tires on the rear axle.
Placing new tires on the front axle may
cause loss of vehicle control in some
driving conditions and cause an accident and personal injury.
8-38 Maintenance and do-it-yourself
● If the wheels are changed for any reason, always replace with wheels which
have the same off-set dimension.
Wheels of a different off-set could
cause premature tire wear, degrade vehicle handling characteristics, affect the
VDC system and/or interference with
the brake discs/drums. Such interference can lead to decreased braking efficiency and/or early brake pad/shoe
wear. Refer to “Wheels and tires” in the
“Technical and consumer information”
section of this manual for wheel off-set
dimensions.
● When a spare tire is mounted or a wheel
is replaced, tire pressure will not be
indicated, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after 1 minute.
Contact your NISSAN dealer as soon as
possible for tire replacement and/or
system resetting.
● Replacing tires with those not originally
specified by NISSAN could affect the
proper operation of the TPMS.
● Do not install a damaged or deformed
wheel or tire even if it has been repaired. Such wheels or tires could have
structural damage and could fail without warning.
● The use of retread
recommended.
tires
is
not
● For additional information regarding
tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.
Four-wheel drive models
CAUTION
Always use tires of the same type, size,
brand, construction (bias, bias-belted or
radial), and tread pattern on all four
wheels. Failure to do so may result in a
circumference difference between tires on
the front and rear axles which will cause
excessive tire wear and may damage the
transmission, transfer case and differential gears.
If excessive tire wear is found, it is recommended
that all four tires be replaced with tires of the
same size, brand, construction and tread pattern.
The tire pressure and wheel alignment should
also be checked and corrected as necessary.
Contact a NISSAN dealer.
Wheel balance
● Do not use abrasive cleaners when washing
the wheels.
● Inspect wheel rims regularly for dents or
corrosion. Such damage may cause loss of
pressure or poor seal at the tire bead.
● NISSAN recommends waxing the road
wheels to protect against road salt in areas
where it is used during winter.
Unbalanced wheels may affect vehicle handling
and tire life. Even with regular use, wheels can get
out of balance. Therefore, they should be balanced as required.
Spare tire (TEMPORARY USE ONLY
spare tire)
Wheel balance service should be performed with the wheels off the vehicle.
Spin balancing the wheels on the vehicle
could lead to mechanical damage.
Observe the following precautions if the TEMPORARY USE ONLY spare tire must be used.
Otherwise, your vehicle could be damaged or
involved in an accident:
● For additional information regarding
tires, refer to “Important Tire Safety
Information” (US) or “Tire Safety Information” (Canada) in the Warranty Information Booklet.
Care of wheels
● Wash the wheels when washing the vehicle
to maintain their appearance.
● Clean the inner side of the wheels when the
wheel is changed or the underside of the
vehicle is washed.
WARNING
● The spare tire should be used for emergency use only. It should be replaced
with the standard tire at the first opportunity to avoid possible tire or differential damage.
● Drive carefully while the TEMPORARY
USE ONLY spare tire is installed. Avoid
sharp turns and abrupt braking while
driving.
● Periodically check spare tire inflation
pressure. Always keep the pressure of
the TEMPORARY USE ONLY spare tire
at 60 psi (420 kPa, 4.2 bar).
● With the TEMPORARY USE ONLY spare
tire installed do not drive the vehicle at
speeds faster than 50 MPH (80 km/h).
● When driving on roads covered with
snow or ice, the TEMPORARY USE
ONLY spare tire should be used on the
rear wheels and the original tire used
on the front wheels (drive wheels). Use
tire chains only on the front (original)
tires.
● Tire tread of the TEMPORARY USE
ONLY spare tire will wear at a faster rate
than the standard tire. Replace the
spare tire as soon as the tread wear
indicators appear.
● Do not use the spare tire on other
vehicles.
● Do not use more than one spare tire at
the same time.
● Do not tow a trailer when the TEMPORARY USE ONLY spare tire is installed.
Maintenance and do-it-yourself 8-39
CAUTION
● Do not use tire chains on a TEMPORARY USE ONLY spare tire. Tire chains
will not fit properly and may cause damage to the vehicle.
● Because the TEMPORARY USE ONLY
spare tire is smaller than the original
tire, ground clearance is reduced. To
avoid damage to the vehicle, do not
drive over obstacles. Also, do not drive
the vehicle through an automatic car
wash since it may get caught.
8-40 Maintenance and do-it-yourself
9 Technical and consumer information
Recommended fluids/lubricants and capacities . . . . . . . 9-2
Recommended fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
Engine oil and oil filter recommendations . . . . . . . . . . 9-6
Air conditioner system refrigerant and oil
recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9
Dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . 9-9
When traveling or registering your vehicle in
another country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Vehicle identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Vehicle identification number (VIN) plate . . . . . . . . . 9-10
Vehicle identification number
(chassis number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Engine serial number. . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
F.M.V.S.S./C.M.V.S.S. certification label . . . . . . . . . . 9-11
Emission control information label . . . . . . . . . . . . . . . 9-11
Tire and loading information label. . . . . . . . . . . . . . . . 9-12
Air conditioner specification label. . . . . . . . . . . . . . . . 9-12
Installing front license plate . . . . . . . . . . . . . . . . . . . . . . . . 9-12
Vehicle loading information . . . . . . . . . . . . . . . . . . . . . . . . 9-13
Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13
Vehicle load capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14
Securing the load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
Loading tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16
Measurement of weights . . . . . . . . . . . . . . . . . . . . . . . 9-16
Towing a trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17
Maximum load limits . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17
Towing load/specification. . . . . . . . . . . . . . . . . . . . . . . 9-20
Towing safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-21
Flat towing for 4–Wheel drive vehicle
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-28
Flat towing for front wheel drive vehicle
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-28
Uniform tire quality grading . . . . . . . . . . . . . . . . . . . . . . . . 9-29
Emission control system warranty . . . . . . . . . . . . . . . . . . 9-30
Reporting safety defects . . . . . . . . . . . . . . . . . . . . . . . . . . 9-30
Readiness for inspection/maintenance (I/M) test . . . . . 9-31
Event Data Recorders (EDR) (if so equipped). . . . . . . . 9-32
Owner’s Manual/Service Manual order information . . . 9-32
RECOMMENDED FLUIDS/
LUBRICANTS AND CAPACITIES
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.
Capacity (Approximate)
US measure
Imp measure
19-1/2 Gal
16-1/4 Gal
Fuel
Engine oil
Recommended Fluids and Lubricants
Liter
74 L
Drain and refill
With oil filter
change
5-1/8 qt
4-1/4 qt
4.8 L
Without oil
filter change
4-3/4 qt
4 qt
4.5 L
With reservoir
2-1/2 gal
2-1/8 gal
Continuously Variable Transmission (CVT)
fluid
—
—
—
Power steering fluid (PSF)
—
—
—
VQ35DE
Cooling system
9-2 Technical and consumer information
9.8 L
• For additional information, refer to “Recommended fuel” in this section.
• For additional information, refer to “Engine Oil” in the “Maintenance and
do-it-yourself” section of this manual.
• Genuine NISSAN engine oil or equivelant
• NISSAN recommends Genuine NISSAN Ester Oil available at a NISSAN
dealer.
• Engine oil with API Certification Mark
• Viscosity SAE 0W-20
• As an alternative to this recommended oil, SAE 5W-30 conventional petroleum based oil may be used and meets all specifications and requirements necessary to maintain the New Vehicle Limited Warranty.
• For additional information, refer to “Engine oil and oil filter recommendations” in this section.
• Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or
equivalent
• Genuine NISSAN CVT Fluid NS-3
• NISSAN recommends using Genuine NISSAN CVT Fluid NS-3
ONLY in NISSAN CVTs. Do not mix with other fluids. Using fluids
that are not equivalent to Genuine NISSAN CVT Fluid NS-3 may
damage the CVT. Damage caused by the use of fluids other than as
recommended is not covered under NISSAN’s New Vehicle Limited
Warranty.
• Genuine NISSAN E-PSF or equivalent.
• Use of power steering fluid other than Genuine NISSAN E-PSF will prevent the power steering system from operating properly.
Capacity (Approximate)
Differential gear oil
—
—
—
Transfer fluid
—
—
—
Brake fluid
—
—
—
Multi-purpose grease
—
—
—
Air conditioning system refrigerant
—
—
—
Air conditioning system oil
—
—
—
1 gal
7/8 gal
3.8 L
Windshield-washer fluid
Recommended Fluids and Lubricants
• Genuine NISSAN Differential Oil Hypoid Super Semi-Synthetic API GL-5,
Viscosity SAE 75W-90
• The use of differential gear oil other than the specified may cause vehicle
malfunctions and result in non-warranty vehicle repairs.
• API GL-5, Viscosity SAE 80W-90 or equivalent
• Genuine NISSAN Super Heavy Duty Brake Fluid Available in mainland
U.S.A. through a NISSAN dealer or equivalent DOT 3
• NLGI No. 2 (Lithium Soap base)
• HFC-134a (R-134a)
• For additional information, refer to “Air conditioner system refrigerant and
oil recommendations” in this section.
• Genuine NISSAN A/C System Oil Type S or equivalent
• For additional information, refer to “Air conditioner system refrigerant and
oil recommendations” in this section.
• Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze
fluid or equivalent
Technical and consumer information 9-3
RECOMMENDED FUEL
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91).
CAUTION
● Only vehicles with the E-85 filler door
label can operate on E-85. Fuel system
or other damage can occur if E-85 is
used in vehicles that are not designed
to run on E-85.
● Using a fuel other than that specified
could adversely affect the emission
control system, and may also affect the
warranty coverage.
● Under no circumstances should a
leaded gasoline be used, because this
will damage the three-way catalyst.
● Do not use E-15 or E-85 fuel in your
vehicle. Your vehicle is not designed to
run on E-15 or E-85 fuel. Using E-15 or
E-85 fuel in a vehicle not specifically
designed for E-15 or E-85 fuel can adversely affect the emission control devices and systems of the vehicle. Damage caused by such fuel is not covered
by the NISSAN new vehicle limited
warranty.
9-4 Technical and consumer information
● U.S. government regulations require
ethanol dispensing pumps to be identified by a small, square, orange and
black label with the common abbreviation or the appropriate percentage for
that region.
Gasoline specifications
NISSAN recommends using gasoline that meets
the World-Wide Fuel Charter (WWFC) specifications where it is available. Many of the automobile manufacturers developed this specification
to improve emission control system and vehicle
performance. Ask your service station manager if
the gasoline meets the WWFC specifications.
Reformulated gasoline
Some fuel suppliers are now producing reformulated gasolines. These gasolines are specially
designed to reduce vehicle emissions. NISSAN
supports efforts towards cleaner air and suggests that you use reformulated gasoline when
available.
Gasoline containing oxygenates
Some fuel suppliers sell gasoline containing oxygenates such as ethanol, MTBE and methanol
with or without advertising their presence.
NISSAN does not recommend the use of fuels of
which the oxygenate content and the fuel com-
patibility for your NISSAN cannot be readily determined. If in doubt, ask your service station
manager.
If you use oxygenate-blend gasoline, please take
the following precautions as the usage of such
fuels may cause vehicle performance problems
and/or fuel system damage.
● The fuel should be unleaded and have
an octane rating no lower than that
recommended for unleaded gasoline.
● If an oxygenate-blend other than methanol blend is used, it should contain no
more than 10% oxygenate. (MTBE may,
however, be added up to 15%.)
● E-15 fuel contains more than 10% oxygenate. E-15 fuel will adversely affect
the emission control devices and systems of the vehicle and should not be
used. Damage caused by such fuel is
not covered by the NISSAN new vehicle
limited warranty.
● If a methanol blend is used, it should
contain no more than 5% methanol
(methyl alcohol, wood alcohol). It should
also contain a suitable amount of appropriate cosolvents and corrosion inhibitors. If not properly formulated with appropriate cosolvents and corrosion
inhibitors, such methanol blends may
cause fuel system damage and/or vehicle performance problems. At this
time, sufficient data is not available to
ensure that all methanol blends are suitable for use in NISSAN vehicles.
If any driveability problems such as engine stalling and difficult hot-starting are experienced after
using oxygenate-blend fuels, immediately
change to a non-oxygenate fuel or a fuel with a
low blend of MTBE.
Take care not to spill gasoline during refueling. Gasoline containing oxygenates can
cause paint damage.
E–15 fuel
Octane rating tips
E-15 fuel is a mixture of approximately 15% fuel
ethanol and 85% unleaded gasoline. E-15 can
only be used in vehicles designed to run on E-15
fuel. Do not use E-15 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified with small, square,
orange and black label with the common abbreviation or the appropriate percentage for that
region.
Using unleaded gasoline with an octane
rating lower than recommended can cause
persistent, heavy “spark knock.” (“Spark
knock” is a metallic rapping noise.) If severe, this can lead to engine damage. If you
detect a persistent heavy spark knock even
when using gasoline of the stated octane
rating, or if you hear steady spark knock
while holding a steady speed on level
roads, have a NISSAN dealer correct the
condition. Failure to correct the condition
is misuse of the vehicle, for which NISSAN
is not responsible.
E–85 fuel
E-85 fuel is a mixture of approximately 85% fuel
ethanol and 15% unleaded gasoline. E-85 can
only be used in a Flexible Fuel Vehicle (FFV). Do
not use E-85 in your vehicle. U.S. government
regulations require fuel ethanol dispensing
pumps to be identified by a small, square, orange
and black label with the common abbreviation or
the appropriate percentage for that region.
Aftermarket fuel additives
NISSAN does not recommend the use of any
aftermarket fuel additives (for example, fuel injector cleaner, octane booster, intake valve deposit
removers, etc.) which are sold commercially.
Many of these additives intended for gum, varnish
or deposit removal may contain active solvents or
similar ingredients that can be harmful to the fuel
system and engine.
Incorrect ignition timing may result in spark
knock, after-run and/or overheating, which may
cause excessive fuel consumption or engine
damage. If any of the above symptoms are encountered, have your vehicle checked at a
NISSAN dealer.
However, now and then you may notice
light spark knock for a short time while
accelerating or driving up hills. This is not a
cause for concern, because you get the
greatest fuel benefit when there is light
spark knock for a short time under heavy
engine load.
Technical and consumer information 9-5
Oil viscosity
The engine oil viscosity or thickness changes
with temperature. Because of this, it is important
to select the engine oil viscosity based on the
temperatures at which the vehicle will be operated before the next oil change. Choosing an oil
viscosity other than that recommended could
cause serious engine damage.
Selecting the correct oil filter
LTI2051
ENGINE OIL AND OIL FILTER
RECOMMENDATIONS
Selecting the correct oil
It is essential to choose the correct grade, quality
and viscosity engine oil to ensure satisfactory
engine life and performance. For additional information, refer to “Recommended fluids/lubricants
and capacities” in this section. NISSAN recommends the use of an energy conserving oil in
order to improve fuel economy.
Select only engine oils that meet the American
Petroleum Institute (API) certification or International Lubricant Standardization and Approval
9-6 Technical and consumer information
Committee (ILSAC) certification and SAE viscosity standard. These oils have the API certification mark on the front of the container. Oils which
do not have the specified quality label should not
be used as they could cause engine damage.
Oil additives
NISSAN does not recommend the use of oil
additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed.
Oil which may contain foreign matter or has been
previously used should not be used.
Your new NISSAN vehicle is equipped with a
high-quality Genuine NISSAN oil filter. When
replacing, use a Genuine NISSAN oil filter or its
equivalent for the reason described in “Change
intervals.”
Change intervals
The oil and oil filter change intervals for your
engine are based on the use of the specified
quality oils and filters. Using engine oil and filters
that are not of the specified quality, or exceeding
recommended oil and filter change intervals
could reduce engine life. Damage to the engine
caused by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not
covered by the NISSAN new vehicle limited warranty.
Your engine was filled with a high-quality engine
oil when it was built. You do not have to change
the oil before the first recommended change
interval. Oil and filter change intervals depend
upon how you use your vehicle.
Operation under the following conditions may
require more frequent oil and filter changes:
● repeated short distance driving at cold outside temperatures
● driving in dusty conditions
● extensive idling
● towing a trailer
● stop and go commuting
For additional information, refer to the “NISSAN
Service and Maintenance Guide” for the maintenance schedule.
CAUTION
The use of any other refrigerant or oil will
cause severe damage to the air conditioning system and will require the replacement of all air conditioner system
components.
The refrigerant HFC-134a (R-134a) in your
NISSAN vehicle does not harm the earth’s ozone
layer. Although this refrigerant does not affect the
earth’s atmosphere, certain government regulations require the recovery and recycling of any
refrigerant during automotive air conditioner system service. A NISSAN dealer has the trained
technicians and equipment needed to recover
and recycle your air conditioner system refrigerant.
Contact a NISSAN dealer when servicing your air
conditioner system.
AIR CONDITIONER SYSTEM
REFRIGERANT AND OIL
RECOMMENDATIONS
The air conditioner system in your NISSAN
vehicle must be charged with the refrigerant HFC-134a (R-134a) and NISSAN A/C
system oil Type S or the exact equivalents.
Technical and consumer information 9-7
SPECIFICATIONS
ENGINE
Model
Type
Cylinder arrangement
Bore x Stroke
Displacement
Firing order
VQ35DE
Gasoline, 4-cycle, DOHC
6-cylinder, V-block, Slanted at 60°
in (mm) 3.760 x 3.205 (95.5 x 81.4)
cu in (cm3) 213.45 (3,498)
1–2–3–4–5–6
Idle speed
CVT (in N (Neutral) position)
Ignition timing (degree B.T.D.C. at idle speed)
CO % at idle
Spark plug
Spark plug gap (Nominal)
Camshaft operation
This spark ignition system complies with the Canadian standard ICES-002.
9-8 Technical and consumer information
No adjustment is necessary.
FXE22HR-11
in (mm) 0.043 (1.1)
Timing chain
WHEELS AND TIRES
DIMENSIONS AND WEIGHTS
Wheel type
Offset in (mm)
Size
Aluminum
1.97 (50)
18 x 7.5J
1.97 (50)
20 x 7.5J
0.98 (25)
18 x 4T
Spare Wheel - Steel
Tire size
235/65R18
235/55R20
Spare tire
T165/90D18
Overall length
Overall width
Overall height
without roof rack
with roof rack
Front and Rear Track
Wheelbase
Gross vehicle weight rating
Gross axle weight rating
Front
Rear
in (mm)
in (mm)
197.2 (5,008)
77.2 (1,960)
in (mm)
in (mm)
in (mm)
in (mm)
69.6 (1,768)
70.2 (1,783)
65.7 (1,670)
114.2 (2,900)
lb (kg)
Refer to the “F.M.V.S.S./C.M.
V.S.S. certification label” on
the center pillar between the
driver’s side front and rear
doors.
lb (kg)
lb (kg)
Technical and consumer information 9-9
WHEN TRAVELING OR REGISTERING
YOUR VEHICLE IN ANOTHER
COUNTRY
VEHICLE IDENTIFICATION
When planning to drive your NISSAN vehicle in another country, you should first find
out if the fuel available is suitable for your vehicle’s engine.
Using fuel with an octane rating that is too low
may cause engine damage. All gasoline vehicles
must be operated with unleaded gasoline. Therefore, avoid taking your vehicle to areas where
appropriate fuel is not available.
When transferring the registration of your
vehicle to another country, state, province
or district, it may be necessary to modify the
vehicle to meet local laws and regulations.
The laws and regulations for motor vehicle emission control and safety standards vary according
to the country, state, province or district; therefore, vehicle specifications may differ.
When any vehicle is to be taken into another country, state, province or district and
registered, its modifications, transportation and registration are the responsibility
of the user. NISSAN is not responsible for
any inconvenience that may result.
9-10 Technical and consumer information
TI1050M
LTI2028
VEHICLE IDENTIFICATION NUMBER
(VIN) PLATE
VEHICLE IDENTIFICATION NUMBER
(chassis number)
The VIN plate is located as shown. This number is
the identification for your vehicle and is used in
the vehicle registration.
The vehicle identification number is located as
shown.
The VIN number is also available through the
center display screen. For additional information,
refer to your “Navigation System Owner’s
Manual”.
LTI2034
ENGINE SERIAL NUMBER
The number is stamped on the engine as shown.
WTI0058
WTI0167
F.M.V.S.S./C.M.V.S.S.
CERTIFICATION LABEL
EMISSION CONTROL
INFORMATION LABEL
The Federal/Canadian Motor Vehicle Safety
Standard (F.M.V.S.S./C.M.V.S.S.) certification label is affixed as shown. This label contains valuable vehicle information, such as: (GVWR),
(GAWR), month and year of manufacture, (VIN),
etc. Review it carefully.
The emission control information label is attached to the underside of the hood as shown.
Technical and consumer information 9-11
INSTALLING FRONT LICENSE PLATE
To mount the license plate, attach the license
plate bracket to the front plastic finisher at the
location marks (small dimples) using the screws
provided.
LTI0084
WTI0173
TIRE AND LOADING INFORMATION
LABEL
AIR CONDITIONER SPECIFICATION
LABEL
The cold tire pressure is shown on the Tire and
Loading Information Label. The label is located as
shown.
The air conditioner specification label is affixed to
the underside of the hood as shown.
9-12 Technical and consumer information
VEHICLE LOADING INFORMATION
WARNING
● It is extremely dangerous to ride
in a cargo area inside a vehicle. In
a collision, people riding in these
areas are more likely to be seriously injured or killed.
● Do not allow people to ride in any
area of your vehicle that is not
equipped with seats and seat
belts.
● Be sure everyone in your vehicle
is in a seat and using a seat belt
properly.
TERMS
It is important to familiarize yourself with
the following terms before loading your
vehicle:
● Curb Weight (actual weight of your
vehicle) - vehicle weight including:
standard and optional equipment, fluids, emergency tools, and spare tire
assembly. This weight does not include passengers and cargo.
● GVW (Gross Vehicle Weight) - curb
weight plus the combined weight of
passengers and cargo.
● GVWR (Gross Vehicle Weight Rating) - maximum total combined
weight of the unloaded vehicle, passengers, luggage, hitch, trailer
tongue load and any other optional
equipment. This information is located on the F.M.V.S.S./C.M.V.S.S.
certification label.
● GAWR (Gross Axle Weight Rating) maximum weight (load) limit specified
for the front or rear axle. This information
is
located
on
the
F.M.V.S.S./C.M.V.S.S. certification
label.
● Vehicle Capacity Weight, Load limit,
Total load capacity - maximum total
weight limit specified of the load
(passengers and cargo) for the vehicle. This is the maximum combined
weight of occupants and cargo that
can be loaded into the vehicle. If the
vehicle is used to tow a trailer, the
trailer tongue weight must be included as part of the cargo load. This
information is located on the Tire and
Loading Information label.
● Cargo capacity - permissible weight
of cargo, the subtracted weight of
occupants from the load limit.
● GCWR (Gross Combined Weight
rating) - The maximum total weight
rating of the vehicle, passengers,
cargo, and trailer.
Technical and consumer information 9-13
VEHICLE LOAD CAPACITY
Do not exceed the load limit of your vehicle shown as “The combined weight of
occupants and cargo” on the Tire and
Loading Information label. Do not exceed
the number of occupants shown as
“Seating Capacity” on the Tire and Loading Information label.
To get “the combined weight of occupants and cargo”, add the weight of all
occupants, then add the total luggage
weight. Examples are shown in the following illustration.
LTI0152
Example
9-14 Technical and consumer information
Steps for determining correct load
limit
1. Locate the statement “The combined
weight of occupants and cargo
should never exceed XXX lbs or XXX
kg” on your vehicle’s placard.
2. Determine the combined weight of
the driver and passengers that will be
riding in your vehicle.
3. Subtract the combined weight of the
driver and passengers from XXX lbs
or XXX kg.
4. The resulting figure equals the available amount of cargo and luggage
load capacity. For example, if the
XXX amount equals 1,400 lbs. and
there will be five 150 lb. passengers
in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400-750 (5 X 150)
= 650 lbs) or (640-340 (5 X 70) =
300 kg.)
5. Determine the combined weight of
luggage and cargo being loaded on
the vehicle. That weight may not
safely exceed the available cargo and
luggage load capacity calculated in
step 4.
6. If your vehicle will be towing a trailer,
load from your trailer will be transferred to your vehicle. Consult this
manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
Before driving a loaded vehicle, confirm
that you do not exceed the Gross Vehicle
Weight Rating (GVWR) or the Gross Axle
Weight Rating (GAWR) for your vehicle.
For additional information, refer to “Measurement of weights” in this section.
Also check tires for proper inflation pressures. For additional information, refer to
the “Tire and loading information label” in
this section.
LIC2208
Cargo area luggage hooks
SECURING THE LOAD
There are luggage hooks located in the cargo
area as shown. The hooks can be used to secure
cargo with ropes or other types of straps.
Do not apply a total load of more than
6.5 lbs. (29 N) to a single metal floor hook
when securing cargo.
Technical and consumer information 9-15
WARNING
● Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. Do not place cargo higher than
the seatbacks. In a sudden stop or collision, unsecured cargo could cause
personal injury.
● The child restraint top tether strap may
be damaged by contact with items in
the cargo area. Secure any items in the
cargo area. Your child could be seriously injured or killed in a collision if
the top tether strap is damaged.
● Do not load your vehicle any heavier
than the GVWR or the maximum front
and rear GAWRs. If you do, parts of your
vehicle can break, tire damage could
occur, or it can change the way your
vehicle handles. This could result in loss
of control and cause personal injury.
LOADING TIPS
● The GVW must not exceed GVWR
or GAWR as specified on the
F.M.V.S.S./C.M.V.S.S. certification
label.
9-16 Technical and consumer information
● Do not load the front and rear axle to
the GAWR. Doing so will exceed the
GVWR.
WARNING
● Properly secure all cargo with
ropes or straps to help prevent it
from sliding or shifting. Do not
place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could
cause personal injury.
● Do not load your vehicle any
heavier than the GVWR or the
maximum front and rear GAWRs.
If you do, parts of your vehicle can
break, tire damage could occur,
or it can change the way your
vehicle handles. This could result
in loss of control and cause personal injury.
● Overloading not only can shorten
the life of your vehicle and the
tire, but can also cause unsafe
vehicle handling and longer braking distances. This may cause a
premature tire failure which
could result in a serious accident
and personal injury. Failures
caused by overloading are not
covered by the vehicle’s warranty.
MEASUREMENT OF WEIGHTS
Secure loose items to prevent weight
shifts that could affect the balance of your
vehicle. When the vehicle is loaded, drive
to a scale and weigh the front and the rear
wheels separately to determine axle
loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads
should not exceed the gross vehicle
weight rating (GVWR). These ratings are
given on the vehicle certification label. If
weight ratings are exceeded, move or remove items to bring all weights below the
ratings.
TOWING A TRAILER
WARNING
Overloading or improper loading of a
trailer and its cargo can adversely affect
vehicle handling, braking and performance and may lead to accidents.
CAUTION
● Do not tow a trailer or haul a heavy load
for the first 500 miles (805 km). Your
engine, axle or other parts could be
damaged.
● For the first 500 miles (805 km) that you
tow a trailer, do not drive over 50 mph
(80 km/h) and do not make starts at full
throttle. This helps the engine and other
parts of your vehicle wear in at the
heavier loads.
Your new vehicle was designed to be used primarily to carry passengers and cargo. Remember
that towing a trailer places additional loads on
your vehicle’s engine, drive train, steering, braking and other systems.
A NISSAN Towing Guide (U.S. only) is available
on the website at www.nissanusa.com. This
guide includes information on trailer towing capability and the special equipment required for
proper towing.
MAXIMUM LOAD LIMITS
Maximum trailer loads
Never allow the total trailer load to exceed the
value specified in the following Towing
Load/Specification Chart found in this section.
The total trailer load equals trailer weight plus its
cargo weight.
● When towing a trailer load of 3,500 lbs.
(1,587 kg) or more, trailers with a brake
system MUST be used.
The maximum Gross Combined Weight Rating
(GCWR) should not exceed the value specified
in the following Towing Load/Specification Chart.
LTI2041
The GCWR equals the combined weight of the
towing vehicle (including passengers and cargo)
plus the total trailer load. Towing loads greater
than these or using improper towing equipment
could adversely affect vehicle handling, braking
and performance.
The ability of your vehicle to tow a trailer is not
only related to the maximum trailer loads, but also
the places you plan to tow. Tow weights appropriate for level highway driving may have to be
reduced for low traction situations (for example,
on slippery boat ramps).
Technical and consumer information 9-17
Temperature conditions can also affect towing.
For example, towing a heavy trailer in high outside
temperatures on graded roads can affect engine
performance and cause overheating. The engine
protection mode, which helps reduce the chance
of engine damage, could activate and automatically decrease engine power. Vehicle speed may
decrease under high load. Plan your trip carefully
to account for trailer and vehicle load, weather
and road conditions.
WARNING
Overheating can result in reduced engine
power and vehicle speed. The reduced
speed may be lower than other traffic,
which could increase the chance of a collision. Be especially careful when driving.
If the vehicle cannot maintain a safe driving speed, pull to the side of the road in a
safe area. Allow the engine to cool and
return to normal operation. For additional
information, refer to “If your vehicle overheats” in the “In case of emergency” section of this manual.
CAUTION
Vehicle damage resulting from improper
towing procedures is not covered by
NISSAN warranties.
9-18 Technical and consumer information
WTI0160
Tongue load
When using a weight carrying or a weight distributing hitch, keep the tongue load between 10 15% of the total trailer load or use the trailer
tongue load specified by the trailer manufacturer.
The tongue load must be within the maximum
tongue load limits shown in the following “Towing
Load/Specification” chart. If the tongue load becomes excessive, rearrange cargo to allow for
proper tongue load.
LTI2042
Maximum Gross Vehicle Weight
(GVW)/maximum Gross Axle Weight
(GAW)
The GVW of the towing vehicle must not exceed
the Gross Vehicle Weight Rating (GVWR)
shown on the F.M.V.S.S./C.M.V.S.S. certification
label. The GVW equals the combined weight of
the unloaded vehicle, passengers, luggage,
hitch, trailer tongue load and any other optional
equipment. In addition, front or rear GAW must
not exceed the Gross Axle Weight Rating
(GAWR) shown on the F.M.V.S.S./C.M.V.S.S.
certification label.
Towing capacities are calculated assuming a
base vehicle with driver and any options required
to achieve the rating. Additional passengers,
cargo and/or optional equipment, such as the
trailer hitch, will add weight to the vehicle and
reduce your vehicle’s maximum towing capacity
and trailer tongue load.
The vehicle and trailer need to be weighed to
confirm the vehicle is within the GVWR, Front
GAWR, Rear GAWR, Gross Combined Weight
Rating (GCWR) and Towing capacity.
All vehicle and trailer weights can be measured
using platform type scales commonly found at
truck stops, highway weigh stations, building
supply centers or salvage yards.
To determine the available payload capacity for
tongue/king pin load, use the following procedure.
1. Locate
the
GVWR
on
the
F.M.V.S.S./C.M.V.S.S. certification label.
2. Weigh your vehicle on the scale with all of
the passengers and cargo that are normally
in the vehicle when towing a trailer.
3. Subtract the actual vehicle weight from the
GVWR. The remaining amount is the available maximum tongue/king pin load.
To determine the available towing capacity, use
the following procedure.
1. Find the GCWR for your vehicle on the
⬙Towing Load/Specification⬙ chart found in
this section.
2. Subtract the actual vehicle weight from the
GCWR. The remaining amount is the available maximum towing capacity.
To determine the Gross Trailer Weight, weigh
your trailer on a scale with all equipment and
cargo, that are normally in the trailer when it is
towed. Make sure the Gross trailer weight is not
more than the Gross Trailer Weight Rating shown
on the trailer and is not more than the calculated
available maximum towing capacity.
Also weigh the front and rear axles on the scale to
make sure the Front Gross Axle Weight and Rear
Gross Axle Weight are not more than Front
Gross Axle Weight and Rear Gross Axle Weight
on the F.M.V.S.S./C.M.V.S.S. certification label.
The cargo in the trailer and vehicle may need to
be moved or removed to meet the specified ratings.
Example:
● Gross Vehicle Weight (GVW) as weighed
on a scale - including passengers, cargo and
hitch - 6,350 lb. (2,880 kg).
● Gross Vehicle Weight Rating (GVWR) from
F.M.V.S.S./C.M.V.S.S. certification label 7,250 lb. (3,289 kg).
● Gross Combined Weight Rating (GCWR)
from “Towing Load/Specification⬙ chart 15,100 lb. (6,849 kg).
● Maximum Trailer towing capacity from “Towing Load/Specification⬙ chart - 9,100 lb.
(4,128 kg).
7,250 lb. (3,289 kg)
– 6,350 lb. (2,880 kg)
= 900 lb. (409 kg)
GVWR
GVW
Available for tongue
weight
15,100 lb. (6,849 kg)
GCWR
– 6,350 lb. (2,880 kg)
GVW
= 9,123 lb. (4,138 kg)
Capacity available for
towing
900 lb. (409 kg) Available tongue weight
/ 8,750 lb. (3,969 kg)
=
Available capacity
10% tongue weight
Technical and consumer information 9-19
The available towing capacity may be less than
the maximum towing capacity due to the passenger and cargo load in the vehicle.
Remember to keep trailer tongue weight between 10 - 15% of the trailer weight or within the
trailer tongue load specification recommended
by the trailer manufacturer. If the tongue load
becomes excessive, rearrange the cargo to obtain the proper tongue load. Do not exceed the
maximum tongue weight specification shown in
the “Towing load/specification” chart even if the
calculated available tongue weight is greater
than 15%. If the calculated tongue weight is less
than 10%, reduce the total trailer weight to match
the available tongue weight.
Always verify that available capacities are within
the required ratings.
9-20 Technical and consumer information
TOWING LOAD/SPECIFICATION
TOWING LOAD/SPECIFICATION CHART
U.S. and Canada
Maximum Towing Capacity*1
5,000 lb. (2,268 kg)
Maximum Tongue Load
500 lb. (227 kg)
Maximum Gross Combined Weight Rating
10,000 lb. (4, 536 kg)
*1: The towing capacity values are calculated assuming a base vehicle with driver and any options required to achieve
the rating. Additional passengers, cargo and/or optional equipment will add weight to the vehicle and reduce your vehicle’s maximum towing capacity.
TOWING SAFETY
Trailer hitch
Your vehicle may be equipped with an optional
trailer tow package. The trailer tow package includes a receiver-type frame mounted hitch. This
hitch is rated for the maximum towing capacity of
this vehicle when the proper towing equipment is
used. Choose a proper ball mount and hitch ball
that is rated for the trailer to be towed. Genuine
NISSAN ball mounts and hitch balls are available
from a NISSAN dealer.
If your vehicle is not equipped with the optional
trailer tow package, check the towing capacity of
your bumper hitch or receiver-type frame
mounted hitch. Choose a proper hitch for your
vehicle and trailer. A Genuine NISSAN trailer
hitch is available from a NISSAN dealer. Make
sure the trailer hitch is securely attached to the
vehicle to help avoid personal injury or property
damage due to sway caused by crosswinds,
rough road surfaces or passing trucks.
WARNING
Ball mount
Trailer hitch components have specific
weight ratings. Your vehicle may be capable of towing a trailer heavier than the
weight rating of the hitch components.
Never exceed the weight rating of the
hitch components. Doing so can cause
serious personal injury or property
damage.
The hitch ball is attached to the ball mount and
the ball mount is inserted into the hitch receiver.
Choose a proper class ball mount based on the
trailer weight. Additionally, the ball mount should
be chosen to keep the trailer tongue level with the
ground.
Hitch ball
A weight carrying or “dead weight” ball mount is
one that is designed to carry the whole amount of
tongue weight and gross weight directly on the
ball mount and on the receiver.
Choose a hitch ball of the proper size and weight
rating for your trailer:
● The required hitch ball size is stamped on
most trailer couplers. Most hitch balls also
have the size printed on the top of the ball.
● Choose the proper class hitch ball based on
the trailer weight.
● The diameter of the threaded shank of the
hitch ball must be matched to the ball mount
hole diameter. The hitch ball shank should
be no more than 1/16” smaller than the hole
in the ball mount.
● The threaded shank of the hitch ball must be
long enough to be properly secured to the
ball mount. There should be at least 2
threads showing beyond the lock washer
and nut.
Weight carrying hitches
Weight distribution hitch
This type of hitch is also called a “load-leveling” or
“equalizing” hitch. A set of bars attach to the ball
mount and to the trailer to distribute the tongue
weight (hitch weight) of your trailer. Many vehicles
can’t carry the full tongue weight of a given trailer,
and need some of the tongue weight transferred
through the frame and pushing down on the front
wheels. This gives stability to the tow vehicle.
A weight-distributing hitch system (Class IV) is
recommended if you plan to tow trailers with a
maximum weight over 5,000 lbs (2,268 kg).
Check with the trailer and towing equipment
manufacturers to determine if they recommend
the use of a weight-distributing hitch system.
Technical and consumer information 9-21
NOTE:
A weight-distributing hitch system may affect the operation of trailer surge brakes. If
you are considering use of a weightdistributing hitch system with a surge
brake-equipped trailer, check with the
surge brake, hitch or trailer manufacturer
to determine if and how this can be done.
Follow the instructions provided by the manufacturer for installing and using the weightdistributing hitch system.
General set-up instructions are as follows:
1. Park unloaded vehicle on a level surface.
With the ignition on and the doors closed,
allow the vehicle to stand for several minutes
so that it can level.
2. Measure the height of a reference point on
the front and rear bumpers at the center of
the vehicle.
3. Attach the trailer to the vehicle and adjust
the hitch equalizers so that the front bumper
height is within 0 - .5 inches (0 – 13 mm) of
the reference height measured in step 2. The
rear bumper should be no higher than the
reference height measured in step 2.
9-22 Technical and consumer information
WARNING
Class I hitch
Properly adjust the weight distributing
hitch so the rear of the bumper is no
higher than the measured reference
height when the trailer is attached. If the
rear bumper is higher than the measured
reference height when loaded, the vehicle
may handle unpredictably which could
cause a loss of vehicle control and cause
serious personal injury or property
damage.
Class I trailer hitch equipment (receiver, ball
mount and hitch ball) can be used to tow trailers
of a maximum weight of 2,000 lb (907 kg).
Sway control device
Class III trailer hitch equipment (receiver, ball
mount and hitch ball) can be used to tow trailers
of a maximum weight of 5,000 lb (2,268 kg).
Sudden maneuvers, wind gusts, and buffeting
caused by other vehicles can affect trailer handling. Sway control devices may be used to help
control these affects. If you choose to use one,
contact a reputable trailer hitch supplier to make
sure the sway control device will work with the
vehicle, hitch, trailer and the trailer’s brake system. Follow the instructions provided by the
manufacturer for installing and using the sway
control device.
Class II hitch
Class II trailer hitch equipment (receiver, ball
mount and hitch ball) can be used to tow trailers
of a maximum weight of 3,500 lb (1,587 kg).
Class III hitch
Tire pressures
● When towing a trailer, inflate the vehicle tires to the recommended cold
tire pressure indicated on the Tire
and Loading Information label.
● Trailer tire condition, size, load rating
and proper inflation pressure should
be in accordance with the trailer and
tire manufacturer’s specifications.
Always use suitable safety chains between your
vehicle and the trailer. The safety chains should
be crossed and should be attached to the hitch,
not to the vehicle bumper or axle. The safety
chains can be attached to the bumper if the hitch
ball is mounted to the bumper. Be sure to leave
enough slack in the chains to permit turning
corners.
Trailer lights should comply with federal and/or
local regulations. For assistance in hooking up
trailer lights, contact a NISSAN dealer or reputable trailer retailer. Vehicles equipped with the
optional trailer tow package are equipped with a
7-pin trailer harness connector. If your trailer is
equipped with a flat 4-pin connector, an adapter
will be needed to connect the trailer lights to the
vehicle. Adapters are available at auto parts
stores and hitch retailers.
Trailer lights
Trailer brakes
Safety chains
CAUTION
When splicing into the vehicle electrical
system, a commercially available powertype module/converter must be used to
provide power for all trailer lighting. This
unit uses the vehicle battery as a direct
power source for all trailer lights while
using the vehicle tail light, stoplight and
turn signal circuits as a signal source. The
module/converter must draw no more that
15 milliamps from the stop and tail lamp
circuits. Using a module/converter that
exceeds these power requirements may
damage the vehicle’s electrical system.
See a reputable trailer retailer to obtain
the proper equipment and to have it
installed.
When towing a trailer load of 3,500 lbs.
(1,587 kg) or more, trailers with a brake
system MUST be used. However, most states
require a separate braking system on trailers with
a loaded weight above a specific amount. Make
sure the trailer meets the local regulations and
the regulations where you plan to tow.
Electric Trailer Brakes - Electric braking systems are activated by an electronic signal sent
from a trailer brake controller (special brakesensing module). For additional information, refer
to “Electric trailer brake controller” in this section.
Have a professional supplier of towing equipment make sure the trailer brakes are properly
installed and demonstrate proper brake function
testing.
WARNING
Never connect a trailer brake system directly to the vehicle brake system.
Several types of braking systems are available.
Surge Brakes - The surge brake actuator is
mounted on the trailer tongue with a hydraulic line
running to each trailer wheel. Surge brakes are
activated by the trailer pushing against the hitch
ball when the tow vehicle is braking. Hydraulic
surge brakes are common on rental trailers and
some boat trailers. In this type of system, there is
no hydraulic or electric connection for brake operation between the tow vehicle and the trailer.
Technical and consumer information 9-23
To install the electric trailer brake controller
jumper harness, perform the following procedure:
1. Open the driver door. Move the seat to the
rearmost position.
LTI0117
Jumper Harness
Electric trailer brake controller
Trailers equipped with electric brakes may require the installation of an aftermarket trailer
brake controller.
Your vehicle is equipped with a connector and
jumper harness that is specifically designed to be
used when installing an aftermarket brake controller.
9-24 Technical and consumer information
LTI2045
Connector Location
Wire color designation for electric trailer brake
controller jumper harness.
WIRE COLOR
RED/GREEN
BLACK
BROWN/WHITE
RED/BLUE
RED
LTI2046
Connector
2. Locate the jumper harness connector under
the lower portion of the instrument panel.
The connector is taped to the wiring harness
1 as indicated.
䊊
● The connector is marked with a white tag
with “elec brake conn”.
NOTE
Vehicle stop lamp switch
to trailer brake controller.
Brake controller ground
(-).
Trailer brake controller
switched output.
Not used
Fused trailer brake controller battery feed (B+).
3. Peel off the tape and connect the jumper
harness to the connector.
4. Release the parking brake.
5. Install the aftermarket electric trailer brake
controller according to the manufacturer’s
instructions.
Pre-towing tips
● Be certain your vehicle maintains a level
position when a loaded and/or unloaded
trailer is hitched. Do not drive the vehicle if it
has an abnormal nose-up or nose-down
condition; check for improper tongue load,
overload, worn suspension or other possible
causes of either condition.
● Always secure items in the trailer to prevent
load shift while driving.
● Keep the cargo load as low as possible in
the trailer to keep the trailer center of gravity
low.
● Load the trailer so approximately 60% of the
trailer load is in the front half and 40% is in
the back half. Also make sure the load is
balanced side to side.
● Check your hitch, trailer tire pressure, vehicle tire pressure, trailer light operation, and
trailer wheel lug nuts every time you attach a
trailer to the vehicle.
● Be certain your rearview mirrors conform to
all federal, state or local regulations. If not,
install any mirrors required for towing before
driving the vehicle.
● Determine the overall height of the vehicle
and trailer so the required clearance is
known.
Trailer towing tips
In order to gain skill and an understanding of the
vehicle’s behavior, you should practice turning,
stopping and backing up in an area which is free
from traffic. Steering stability and braking performance will be somewhat different than under
normal driving conditions.
Technical and consumer information 9-25
● Always secure items in the trailer to prevent
load shift while driving.
● Lock the trailer hitch coupler with a pin or
lock to prevent the coupler from inadvertently becoming unlatched.
1. Apply and hold the brake pedal.
2. Have someone place blocks on the downhill
side of the vehicle and trailer wheels.
● Avoid abrupt starts, acceleration or stops.
3. After the wheel blocks are in place, slowly
release the brake pedal until the blocks absorb the vehicle load.
● Avoid sharp turns or lane changes.
4. Apply the parking brake.
● Always drive your vehicle at a moderate
speed.
5. Shift the transmission into P (Park).
● When backing up, hold the bottom of the
steering wheel with one hand. Move your
hand in the direction in which you want the
trailer to go. Make small corrections and
back up slowly. If possible, have someone
guide you when you are backing up.
Always block the wheels on both vehicle and
trailer when parking. Parking on a slope is not
recommended; however, if you must do so:
CAUTION
If you move the shift lever to the P (Park)
position before blocking the wheels and
applying the parking brake, transmission
damage could occur.
9-26 Technical and consumer information
6. Turn off the engine.
To drive away:
1. Start the vehicle.
2. Apply and hold the brake pedal.
3. Shift the transmission into gear.
4. Release the parking brake.
5. Drive slowly until the vehicle and trailer are
clear from the blocks.
6. Apply and hold the brake pedal.
7. Have someone retrieve and store the blocks.
● While going downhill, the weight of the
trailer pushing on the tow vehicle may decrease overall stability. Therefore, to maintain adequate control, reduce your speed
and shift to a lower gear. Avoid long or
repeated use of the brakes when descending a hill, as this reduces their effectiveness
and could cause overheating. Shifting to a
lower gear instead provides “engine braking” and reduces the need to brake as frequently.
● If the engine coolant temperature rises to a
high temperature, refer to “If your vehicle
overheats” in the “In case of emergency”
section of this owner’s manual.
● Trailer towing requires more fuel than normal
circumstances.
● Avoid towing a trailer for your vehicle’s first
500 miles (805 km).
● For the first 500 miles (805 km) that you do
tow, do not drive over 50 MPH (80 km/h).
● Have your vehicle serviced more often than
at intervals specified in the recommended
Maintenance Schedule in the “NISSAN Service and Maintenance Guide”.
● When making a turn, your trailer wheels will
be closer to the inside of the turn than your
vehicle wheels. To compensate for this,
make a larger than normal turning radius
during the turn.
● Crosswinds and rough roads will adversely
affect vehicle/trailer handling, possibly causing vehicle sway. When being passed by
larger vehicles, be prepared for possible
changes in crosswinds that could affect vehicle handling.
Do the following if the trailer begins to sway:
1. Take your foot off the accelerator pedal to
allow the vehicle to coast and steer as
straight ahead as the road conditions allow.
This combination will help stabilize the vehicle.
● Be careful when passing other vehicles.
Passing while towing a trailer requires considerably more distance than normal passing. Remember, the length of the trailer must
also pass the other vehicle before you can
safely change lanes.
● Use the Tow Mode or downshift the transmission to a lower gear for engine braking
when driving down steep or long hills. This
will help slow the vehicle without applying
the brakes.
● Avoid holding the brake pedal down too long
or too frequently. This could cause the
brakes to overheat, resulting in reduced
braking efficiency.
● Increase your following distance to allow for
greater stopping distances while towing a
trailer. Anticipate stops and brake gradually.
– Do not correct trailer sway by steering or
applying the brakes.
● NISSAN recommends that the cruise control not be used while towing a trailer.
2. When the trailer sway stops, gently apply the
brakes and pull to the side of the road in a
safe area.
● Some states or provinces have specific
regulations and speed limits for vehicles that
are towing trailers. Obey the local speed
limits.
3. Try to rearrange the trailer load so it is balanced as described earlier in this section.
● Check your hitch, trailer wiring harness connections, and trailer wheel lug nuts after
50 miles (80 km) of travel and at every break.
● When launching a boat, don’t allow the water level to go over the exhaust tail pipe or
rear bumper.
● Make sure you disconnect the trailer lights
before backing the trailer into the water or
the trailer lights may burn out.
When towing a trailer, final drive gear oil
should be replaced and transmission
oil/fluid should be changed more frequently. For additional information, refer to
the “Maintenance and do-it-yourself” section in this manual.
Tow mode
Using tow mode is recommended when pulling a
heavy trailer or hauling a heavy load. Press the
TOW MODE switch to activate tow mode. The
indicator light on the TOW MODE switch illuminates when tow mode is selected. Press the
TOW MODE switch again to turn tow mode off.
Tow mode is automatically cancelled when the
ignition switch is turned OFF.
Technical and consumer information 9-27
Tow mode includes the following features:
● Grade logic — Adjusts transmission shifts
when pulling a trailer or hauling a load up a
grade.
● Downhill Speed Control (DSC) — automatically downshifts when driving down a grade
with a trailer or heavy load to help control
vehicle speed.
Driving the vehicle in the tow mode with no
trailer/load or light trailer/light load will not cause
any damage. However, fuel economy may be
reduced and the transmission/engine driving
characteristics may feel unusual.
When towing a trailer, final drive gear oil
should be replaced and transmission
oil/fluid should be changed more frequently. For additional information, refer to
the “Maintenance and do-it-yourself” section in this manual.
FLAT TOWING FOR 4–WHEEL
DRIVE VEHICLE (if so equipped)
Towing your vehicle with all four wheels on the
ground is sometimes called flat towing. This
method is sometimes used when towing a vehicle
behind a recreational vehicle, such as a motor
home.
9-28 Technical and consumer information
CAUTION
CAUTION
● Failure to follow these guidelines can
result in severe transmission damage.
● Failure to follow these guidelines can
result in severe transmission damage.
● Never flat tow your 4-wheel drive (4WD)
vehicle.
● Whenever flat towing your vehicle, always tow forward, never backward.
● DO NOT tow your 4-wheel drive (4WD)
vehicle with any wheels on the ground.
Doing so may cause serious and expensive damage to the powertrain.
● Never tow your front wheel drive vehicle
with the front tires on the ground. Doing
so may cause serious and expensive
damage to the powertrain.
● For emergency towing procedures refer
to “Towing recommended by NISSAN”
in the “In case of emergency” section of
this manual.
● DO NOT tow your front wheel drive continuously variable transmission vehicle
with all four wheels on the ground (flat
towing). Doing so WILL DAMAGE internal transmission parts due to lack of
transmission lubrication.
FLAT TOWING FOR FRONT WHEEL
DRIVE VEHICLE (if so equipped)
Towing your vehicle with all four wheels on the
ground is sometimes called flat towing. This
method is sometimes used when towing a vehicle
behind a recreational vehicle, such as a motor
home.
● For emergency towing procedures refer
to “Towing recommended by NISSAN”
in the “In case of emergency” section of
this manual.
Continuously Variable Transmission
To tow a vehicle equipped with a continuously
variable transmission, an appropriate vehicle
dolly MUST be placed under the towed vehicle’s
drive wheels. Always follow the dolly manufacturer’s recommendations when using their product.
UNIFORM TIRE QUALITY GRADING
DOT (Department of Transportation) Quality
Grades: All passenger car tires must conform to
federal safety requirements in addition to these
grades.
Quality grades can be found where applicable on
the tire sidewall between tread shoulder and
maximum section width. For example:
Treadwear 200 Traction AA Temperature A
Treadwear
The treadwear grade is a comparative rating
based on the wear rate of the tire when tested
under controlled conditions on a specified government test course. For example, a tire graded
150 would wear one and one-half (1 1/2) times
as well on the government course as a tire graded
100. The relative performance of tires depends
upon the actual conditions of their use, however,
and may depart significantly from the norm due to
variations in driving habits, service practices and
differences in road characteristics and climate.
Traction AA, A, B and C
WARNING
The traction grade assigned to this tire is
based on straight-ahead braking traction
tests, and does not include acceleration,
cornering, hydroplaning, or peak traction
characteristics.
Temperature A, B and C
WARNING
The temperature grade for this tire is established for a tire that is properly inflated
and not overloaded. Excessive speed,
under-inflation, or excessive loading, either separately or in combination, can
cause heat build-up and possible tire
failure.
The temperature grades are A (the highest), B,
and C, representing the tire’s resistance to the
generation of heat, and its ability to dissipate heat
when tested under controlled conditions on a
specified indoor laboratory test wheel. Sustained
high temperature can cause the material of the
tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
The grade C corresponds to a level of performance which all passenger car tires must meet
under the Federal Motor Safety Standard No.
109. Grades B and A represent higher levels of
performance on the laboratory test wheel than
the minimum required by law.
The traction grades, from highest to lowest, are
AA, A, B, and C. Those grades represent the
tire’s ability to stop on wet pavement as measured under controlled conditions on specified
government test surfaces of asphalt and concrete. A tire marked C may have poor traction
performance.
Technical and consumer information 9-29
EMISSION CONTROL SYSTEM
WARRANTY
REPORTING SAFETY DEFECTS
Your NISSAN vehicle is covered by the following
emission warranties:
For USA
For USA
1. Emission Defects Warranty
2. Emissions Performance Warranty
Details of this warranty may be found with other
vehicle warranties in your Warranty Information
Booklet which comes with your NISSAN vehicle.
If you did not receive a Warranty Information
Booklet, or it is lost, you may obtain a replacement by writing to:
● Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
For Canada
Emission Control System Warranty
Details of this warranty may be found with other
vehicle warranties in your Warranty Information
Booklet which comes with your NISSAN vehicle.
If you did not receive a Warranty Information
Booklet, or it is lost, you may obtain a replacement by writing to:
● Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario, L4W 4Z5
9-30 Technical and consumer information
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway Traffic
Safety Administration (NHTSA) in addition to notifying NISSAN.
If NHTSA receives similar complaints, it
may open an investigation, and if it finds
that a safety defect exists in a group of
vehicles, it may order a recall and remedy
campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or NISSAN.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888327-4236 (TTY: 1-800-424-9153); go
to http://www.safercar.gov; or write to:
Administrator, NHTSA, 400 Seventh
Street, SW., Washington, D.C. 20590.
You can also obtain other information
about motor vehicle safety from
http://www.safercar.gov.
You may notify NISSAN by contacting our
Consumer Affairs Department, toll-free, at
1-800-NISSAN-1.
For Canada
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform Transport Canada in addition
to notifying NISSAN.
If Transport Canada receives complaints,
it may open an investigation, and if it finds
that a safety defect exists in a group of
vehicles, it may request that NISSAN conduct a recall campaign. However, Transport Canada cannot become involved in
individual problems between you, your
dealer, or NISSAN.
You may contact Transport Canada’s Defect Investigations and Recalls Division
toll free at 1-800-333-0510. You may
also report safety defects online at:
https://wwwapps.tc.gc.ca/Saf-Sec-Sur/
7/PCDB-BDPP/fc-cp.aspx?lang=eng
(English speakers) or
READINESS FOR INSPECTION/
MAINTENANCE (I/M) TEST
https://wwwapps.tc.gc.ca/Saf-Sec-Sur/
7/PCDB-BDPP/fc-cp.aspx?lang=fra
(French speakers)
Additional information concerning motor
vehicle safety may be obtained from Transport Canada’s Road Safety Information
Centre at 1-800-333-0371 or online at
www.tc.gc.ca/roadsafety (English speakers) or www.tc.gc.ca/securiteroutiere
(French speakers).
To notify NISSAN of any safety concerns
please contact our Consumer Information
Centre toll free at 1-800-387-0122.
WARNING
A vehicle equipped with Four-Wheel Drive
(4WD) should never be tested using a two
wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. Make
sure you inform the test facility personnel
that your vehicle is equipped with 4WD
before it is placed on a dynamometer.
Using the wrong test equipment may result in transmission damage or unexpected vehicle movement which could result in serious vehicle damage or personal
injury.
If a powertrain system component is repaired or
the battery is disconnected, the vehicle may be
reset to a “not ready” condition. Before taking the
I/M
test,
check
the
vehicle’s
inspection/maintenance test readiness condition. Place the ignition switch in the ON position
without starting the engine. If the Malfunction
Indicator Light (MIL) comes on steady for 20 seconds and then blinks for 10 seconds, the I/M test
condition is “not ready”. If the MIL does not blink
after 20 seconds, the I/M test condition is
“ready”. Contact a NISSAN dealer to set the
“ready condition” or to prepare the vehicle for
testing.
Due to legal requirements in some states and
Canadian Provinces, your vehicle may be required to be in what is called the “ready condition” for an Inspection/Maintenance (I/M) test of
the emission control system.
The vehicle is set to the “ready condition” when it
is driven through certain driving patterns. Usually,
the ready condition can be obtained by ordinary
usage of the vehicle.
Technical and consumer information 9-31
EVENT DATA RECORDERS (EDR) (if
so equipped)
This vehicle is equipped with an EDR. The main
purpose of an EDR is to record, in certain collision or near collision-like situations, such as an
air bag deployment or hitting a road obstacle,
data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to
record data related to vehicle dynamics and
safety systems for a short period of time, typically
30 seconds or less. The EDR in this vehicle is
designed to record such data as:
● How various systems in your vehicle were
operating;
● Whether or not the driver and passenger
safety belts were buckled/fastened;
● How far (if at all) the driver was depressing
the accelerator and/or brake pedal; and,
● How fast the vehicle was traveling.
● Sounds are not recorded.
These data can help provide a better understanding of the circumstances in which collisions and
injuries occur. NOTE: EDR data are recorded by
your vehicle only if a nontrivial collision situation
occurs; no data are recorded by the EDR under
normal driving conditions and no personal data
(e.g. name, gender, age and collision location)
are recorded. However, other parties, such as
law enforcement, could combine the EDR data
9-32 Technical and consumer information
OWNER’S MANUAL/SERVICE
MANUAL ORDER INFORMATION
with the type of personally identifying data routinely acquired during a collision investigation.
To read data recorded by an EDR, special equipment is required and access to the vehicle or the
EDR is needed. In addition to the vehicle manufacturer and NISSAN dealer, other parties, such
as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. EDR data will only
be accessed with the consent of the vehicle
owner or lessee or as otherwise required or permitted by law.
Genuine NISSAN Service Manuals for this model
year and prior can be purchased. A Genuine
NISSAN Service Manual is the best source of
service and repair information for your vehicle.
This manual is the same one used by the factorytrained technicians working at NISSAN dealerships. Genuine NISSAN Owner’s Manuals can
also be purchased.
For USA
For current pricing and availability of Genuine
NISSAN Service Manuals, contact:
www.nissan-techinfo.com
For current pricing and availability of Genuine
NISSAN Owner’s Manuals, contact:
1-800-247-5321
For Canada
To purchase a copy of a Genuine NISSAN Service Manual or Owner’s Manual, for this model
year and prior, please contact your nearest
NISSAN dealer. For the phone number and location of a NISSAN dealer in your area, call the
NISSAN Information Center at 1-800-387-0122
and a bilingual NISSAN representative will assist
you.
10 Index
2nd row bench seat adjustment . . . . . .1-7, 1-9
A
Air bag (See supplemental restraint
system) . . . . . . . . . . . . . . . . . . . . .1-48
Air bag system
Front (See supplemental front impact
air bag system) . . . . . . . . . . . . . . .1-55
Air bag warning labels . . . . . . . . . . . . .1-65
Air bag warning light. . . . . . . . . . .1-65, 2-15
Air bag warning light, supplemental . .1-65, 2-15
Air cleaner housing filter . . . . . . . . . . . .8-18
Air conditioner
Air conditioner service . . . . . . . . . . .4-50
Air conditioner specification label . . . . .9-12
Air conditioner system refrigerant and
oil recommendations . . . . . . . . . . . . .9-7
Air conditioner system refrigerant
recommendations . . . . . . . . . . . . . .9-7
Heater and air conditioner
controls . . . . . . . . . . . . . . . .4-39, 4-45
Servicing air conditioner . . . . . . . . . .4-50
Alarm system
(See vehicle security system) . . . . . . . . .2-28
Anchor point locations . . . . . . . . . . . . .1-31
Antenna . . . . . . . . . . . . . . . . . . . .4-103
Anti-lock brake warning light. . . . . . . . . .2-11
Anti-lock Braking System (ABS). . . . . . . .5-42
Armrests. . . . . . . . . . . . . . . . . . . . .1-10
Around View® Monitor . . . . . . . . . . . . .4-27
Audible reminders . . . . . . . . . . . . . . .2-17
Audio system . . . . . . . . . . . . . . . . . .4-50
AM radio reception . . . . . . . . . . . . .4-51
Bluetooth® audio. . . . . . . . . . . . . .4-98
Bluetooth® streaming audio . . . . . . . .4-98
Compact Disc (CD) changer . . . . . . .4-69
Compact disc (CD) player . . . . .4-75, 4-82
Digital Versatile Disc (DVD) Player
Operation . . . . . . . . . . . . . . . . . .4-84
FM-AM radio with compact disc (CD)
changer . . . . . . . . . . . . . . . . . . .4-66
FM/AM/SAT radio with CD/DVD player. .4-78
FM/AM/SAT radio with compact disc (CD)
player . . . . . . . . . . . . . . . . . . . .4-71
FM radio reception . . . . . . . . . . . . .4-51
iPod® Player . . . . . . . . . . . . .4-92, 4-94
iPod® player operation . . . . . . .4-92, 4-94
Radio . . . . . . . . . . . . . . . . . . . .4-50
Steering wheel audio control switch . . .4-102
USB interface . . . . . . . . . . . .4-87, 4-88
USB (Universal Serial Bus) Connection
Port . . . . . . . . . . . . . . . . . .4-87, 4-88
Autolight switch. . . . . . . . . . . . . . . . .2-34
Automatic
Automatic drive positioner . . . . . . . . .3-36
Automatic power window switch . . . . .2-54
Automatic anti-glare inside mirror . . . . . . .3-34
Automatic door locks . . . . . . . . . . . . . .3-6
Automatic drive positioner . . . . . . . . . . .3-36
AUX jack . . . . . . . . . . . . . . . . . . . .4-70
B
Battery . . . . . . . . . . . . . . . . . .5-48, 8-14
Charge warning light . . . . . . . . . . . .2-12
Battery replacement
NISSAN Intelligent Key®. . . . . . . . . .8-24
Before starting the engine . . . . . . . . . . .5-13
Belt (See drive belt) . . . . . . . . . . . . . .8-17
Blind Spot Intervention (BSI) system . . . . .5-19
Blind Spot Warning (BSW) warning
system . . . . . . . . . . . . . . . . . . . . . .5-19
Block heater
Engine . . . . . . . . . . . . . . . . . . . .5-49
Bluetooth® audio. . . . . . . . . . . . . . . .4-98
Bluetooth® hands-free phone
system . . . . . . . . . . . . . . . . .4-116, 4-130
Booster seats . . . . . . . . . . . . . . . . . .1-45
Brake
Anti-lock Braking System (ABS). . . . . .5-42
Brake assist (for Intelligent cruise control
system) . . . . . . . . . . . . . . . . . . .5-43
Brake fluid . . . . . . . . . . . . . . . . . .8-13
Brake light (See stop light). . . . . . . . .8-26
Brake system . . . . . . . . . . . . . . . .5-41
Brake warning light . . . . . . . . . . . . .2-11
Brake wear indicators . . . . . . . .2-17, 8-20
Parking brake operation . . . . . . . . . .5-18
Self-adjusting brakes . . . . . . . . . . . .8-20
Brake fluid . . . . . . . . . . . . . . . . . . . .8-13
Brakes . . . . . . . . . . . . . . . . . . . . . .8-20
Brake system . . . . . . . . . . . . . . . . . .5-41
Break-in schedule . . . . . . . . . . . . . . .5-34
Brightness/contrast button . . . . . . . .4-9, 4-18
Brightness control
Instrument panel . . . . . . . . . . . . . . .2-36
Bulb check/instrument panel . . . . . . . . . .2-11
Bulb replacement . . . . . . . . . . . . . . . .8-26
C
Capacities and recommended fuel/lubricants . .9-2
Cargo area storage bin . . . . . . . . . . . . .2-51
Cargo light . . . . . . . . . . . . . . . . . . . .2-59
Cargo (See vehicle loading information) . . . .9-13
Car phone or CB radio. . . . . . . . . . . . .4-116
CD care and cleaning . . . . . . . . . . . . .4-101
CD changer (See audio system) . . . . . . . .4-69
CD player (See audio system) . . . . . .4-75, 4-82
Check tire pressure . . . . . . . . . . . . . . .2-27
Child restraints . . . . . . .1-24, 1-25, 1-26, 1-28
LATCH (Lower Anchors and Tethers for
CHildren) System . . . . . . . . . . . . . .1-28
Precautions on child
restraints. . . . . . . . .1-26, 1-33, 1-39, 1-45
Top tether strap anchor point locations . .1-31
Child restraint with top tether strap. . . . . . .1-31
Child safety rear door lock . . . . . . . . . . . .3-7
Chimes, audible reminders . . . . . . . . . . .2-17
Cleaning exterior and interior . . . . . . . .7-2, 7-4
Clock set/adjustment . . . . . . . . . . . . . .4-16
Clock setting
(models with Navigation System) . . . . . . . .4-10
Clock setting
(models without Navigation System) . . . .4-4, 4-8
C.M.V.S.S. certification label . . . . . . . . . .9-11
Cold weather driving. . . . . . . . . . . . . . .5-48
Compact disc (CD) player . . . . . . . .4-75, 4-82
10-2
Console box . . . . . . . . . . . . . . . . . . .2-46
Continuously Variable Transmission (CVT). . .5-15
Continuously Variable Transmission (CVT)
fluid . . . . . . . . . . . . . . . . . . . . . .8-12
Driving with Continuously Variable
Transmission (CVT) . . . . . . . . . . . . .5-15
Control panel buttons . . . . . . . . . . . . . .4-10
Brightness/contrast button . . . . . .4-9, 4-18
Enter button. . . . . . . . . . . . . . .4-4, 4-10
Without navigation system . . . . . . . . . .4-4
Controls
Audio controls (steering wheel) . . . . . .4-102
Heater and air conditioner
controls . . . . . . . . . . . . . . . .4-39, 4-45
Coolant
Capacities and recommended
fuel/lubricants . . . . . . . . . . . . . . . . .9-2
Changing engine coolant . . . . . . . . . . .8-8
Checking engine coolant level . . . . . . . .8-8
Engine coolant temperature gauge . . . . .2-5
Corrosion protection . . . . . . . . . . . . . . .7-6
Cruise control . . . . . . . . . . .5-32, 5-32, 5-33
Cup holders . . . . . . . . . . . . . . . . . . .2-48
D
Daytime running light system (Canada only) . .2-36
Defroster switch
Rear window and outside mirror defroster
switch. . . . . . . . . . . . . . . . . . . . .2-33
Digital Versatile Disc (DVD) player . . . . . . .4-84
Dimensions and weights . . . . . . . . . . . . .9-9
Dimmer switch for instrument panel . . . . . .2-36
Display controls
(see control panel buttons) . . . . . . . .4-4, 4-10
Door locks . . . . . . . . . . . . . . . . . . . . .3-5
Drive belt . . . . . . . . . . . . . . . . . . . . .8-17
Drive positioner, Automatic . . . . . . . . . . .3-36
Driving
Cold weather driving. . . . . . . . . . . . .5-48
Driving with Continuously Variable
Transmission (CVT) . . . . . . . . . . . . .5-15
Precautions when starting and driving . . . .5-2
Driving the vehicle . . . . . . . . . . . . . . . .5-15
Dual head restraint DVD system . . . . . . .4-104
E
Economy - fuel . . . . . . . . . . . . . . . . .
Emission control information label . . . . . .
Emission control system warranty . . . . . .
Engine
Before starting the engine. . . . . . . . .
Block heater . . . . . . . . . . . . . . . .
Capacities and recommended
fuel/lubricants . . . . . . . . . . . . . . .
Changing engine coolant . . . . . . . . .
Changing engine oil . . . . . . . . . . . .
Changing engine oil filter . . . . . . . . .
Checking engine coolant level . . . . . .
Checking engine oil level . . . . . . . . .
Engine compartment check locations . .
Engine coolant temperature gauge . . .
Engine cooling system . . . . . . . . . .
Engine oil . . . . . . . . . . . . . . . . .
Engine oil and oil filter recommendation .
Engine oil pressure warning light . . . . .
Engine oil viscosity . . . . . . . . . . . .
Engine serial number . . . . . . . . . . .
Engine specifications . . . . . . . . . . .
.5-36
.9-11
.9-30
.5-13
.5-49
. .9-2
. .8-8
.8-10
.8-11
. .8-8
. .8-9
. .8-6
. .2-5
. .8-7
. .8-9
. .9-6
.2-12
. .9-6
.9-11
. .9-8
Starting the engine . . . . . . . . . . . . .5-14
Engine coolant temperature gauge . . . . . . .2-5
Enter button. . . . . . . . . . . . . . . . .4-4, 4-10
Event data recorders . . . . . . . . . . . . . .9-32
Exhaust gas (Carbon monoxide) . . . . . . . . .5-2
Explanation of maintenance items . . . . . . . .8-2
Extended storage switch . . . . . . . . . . . .8-23
Eyeglass case . . . . . . . . . . . . . . . . . .2-47
Fuel gauge . . . . . . . . . . . . . . . . . . .2-6
Fuel octane rating . . . . . . . . . . . . . . .9-5
Fuel recommendation . . . . . . . . . . . . .9-4
Loose fuel cap warning. . . . . . . .2-28, 3-29
Fuel gauge . . . . . . . . . . . . . . . . . . . . .2-6
Fuses . . . . . . . . . . . . . . . . . . . . . . .8-21
Fusible links . . . . . . . . . . . . . . . . . . .8-22
G
F
Flashers (See hazard warning flasher switch) . .6-2
Flat tire . . . . . . . . . . . . . . . . . . . . . . .6-3
Floor mat positioning aid . . . . . . . . . . . . .7-5
Fluid
Brake fluid . . . . . . . . . . . . . . . . . .8-13
Capacities and recommended
fuel/lubricants . . . . . . . . . . . . . . . . .9-2
Continuously Variable Transmission (CVT)
fluid . . . . . . . . . . . . . . . . . . . . . .8-12
Engine coolant. . . . . . . . . . . . . . . . .8-7
Engine oil . . . . . . . . . . . . . . . . . . .8-9
Power steering fluid . . . . . . . . . . . . .8-12
Windshield-washer fluid. . . . . . . . . . .8-13
F.M.V.S.S. certification label. . . . . . . . . . .9-11
Fog light switch . . . . . . . . . . . . . . . . .2-37
Front air bag system
(See supplemental restraint system) . . . . . .1-55
Front power seat adjustment . . . . . . . . . . .1-5
Front seats . . . . . . . . . . . . . . . . . . . . .1-2
Fuel
Capacities and recommended
fuel/lubricants . . . . . . . . . . . . . . . . .9-2
Fuel economy . . . . . . . . . . . . . . . .5-36
Fuel-filler door and cap . . . . . . . . . . .3-28
Garage door opener, HomeLink® Universal
Transceiver . . . . . . . . .2-60, 2-61, 2-62, 2-63
Gas cap . . . . . . . . . . . . . . . . . . . . .3-28
Gauge
Engine coolant temperature gauge . . . . .2-5
Fuel gauge . . . . . . . . . . . . . . . . . . .2-6
Odometer . . . . . . . . . . . . . . . . . . .2-4
Speedometer . . . . . . . . . . . . . . . . .2-4
Tachometer . . . . . . . . . . . . . . . . . .2-5
Trip odometer . . . . . . . . . . . . . . . . .2-4
General maintenance . . . . . . . . . . . . . . .8-2
Glove box. . . . . . . . . . . . . . . . . . . . .2-46
Glove box lock . . . . . . . . . . . . . . . . . .2-46
H
Hands-free phone system,
Bluetooth®. . . . . . . . . . . . . . .4-116, 4-130
Hazard warning flasher switch . . . . . . . . . .6-2
Headlight and turn signal switch . . . . . . . .2-33
Headlight control switch . . . . . . . . . . . .2-34
Headlights . . . . . . . . . . . . . . . . . . . .8-25
Head restraints. . . . . . . . . . . . . . . . . .1-12
Heated seats . . . . . . . . . . . .2-38, 2-39, 2-40
Heated steering wheel . . . . . . . . . . . . .2-41
Heater
Heater and air conditioner
controls . . . . . . . . . . . . . . . .4-39, 4-45
Heater operation . . . . . . . . . . .4-40, 4-46
Hill descent control system . . . . . . . . . . .5-46
Hill start assist system . . . . . . . . . . . . . .5-47
HomeLink® Universal
Transceiver . . . . . . . . .2-60, 2-61, 2-62, 2-63
Hood . . . . . . . . . . . . . . . . . . . . . . .3-22
Hook
Luggage hook . . . . . . . . . . . . . . . .2-50
Horn . . . . . . . . . . . . . . . . . . . . . . .2-38
I
Ignition Switch
Push-Button Ignition Switch . . . . . . . .5-10
Image viewer . . . . . . . . . . . . . . . . . . .4-19
Immobilizer system . . . . . . . . .2-29, 3-4, 5-13
Important vehicle information label . . . . . . .9-11
In-cabin microfilter . . . . . . . . . . . . . . . .8-18
Increasing fuel economy. . . . . . . . . . . . .5-36
Indicator lights and audible reminders
(See warning/indicator lights and audible
reminders) . . . . . . . . . . . . . . . . .2-10, 2-15
Inside automatic anti-glare mirror . . . . . . . .3-34
Inside mirror . . . . . . . . . . . . . . . . . . .3-33
Instrument brightness control . . . . . . . . . .2-36
Instrument panel . . . . . . . . . . . . . . .0-6, 2-2
Instrument panel dimmer switch . . . . . . . .2-36
Intelligent Key system
Key operating range . . . . . . . . . . . . . .3-9
Key operation . . . . . . . . . . . . . . . .3-10
Mechanical key . . . . . . . . . . . . . . . .3-3
10-3
Remote keyless entry operation. . . . . . .3-13
Troubleshooting guide . . . . . . . . . . . .3-18
Warning signals . . . . . . . . . . . . . . .3-18
Interior light. . . . . . . . . . . . . . . . . . . .2-58
iPod® Player . . . . . . . . . . . . . . .4-92, 4-94
ISOFIX child restraints . . . . . . . . . . . . .1-28
J
Jump starting . . . . . . . . . . . . . . . .6-9, 8-16
K
Key . . . . . . . . . . . . . . . . . . . . . . . . .3-2
Keyless entry
With Intelligent Key system
(See Intelligent Key system). . . . . . . . .3-13
Keys, For Intelligent Key system . . . . . . . . .3-7
L
Labels
Air conditioner specification label . . . . .9-12
C.M.V.S.S. certification label . . . . . . . .9-11
Emission control information label . . . . .9-11
Engine serial number . . . . . . . . . . . .9-11
F.M.V.S.S. certification label. . . . . . . . .9-11
Tire and Loading Information label . . . . .9-12
Vehicle identification number (VIN) . . . . .9-10
Vehicle identification number (VIN) plate. .9-10
Warning labels (for SRS) . . . . . . . . . .1-65
LATCH (Lower Anchors and Tethers for CHildren)
System . . . . . . . . . . . . . . . . . . . . . .1-28
10-4
Lift gate . . . . . . . . . . . . . . . . . . . . . .3-23
Lift gate release . . . . . . . . . . . . . . . . .3-27
Light
Air bag warning light . . . . . . . . .1-65, 2-15
Brake light (See stop light) . . . . . . . . .8-26
Bulb check/instrument panel . . . . . . . .2-11
Bulb replacement . . . . . . . . . . . . . .8-26
Charge warning light . . . . . . . . . . . .2-12
Fog lights . . . . . . . . . . . . . . . . . . .8-25
Fog light switch . . . . . . . . . . . . . . .2-37
Headlight and turn signal switch . . . . . .2-33
Headlight control switch . . . . . . . . . .2-34
Headlights . . . . . . . . . . . . . . . . . .8-25
Interior light. . . . . . . . . . . . . . . . . .2-58
Light bulbs . . . . . . . . . . . . . . . . . .8-25
Low tire pressure warning light . . . . . . .2-12
Low windshield-washer fluid warning
light . . . . . . . . . . . . . . . . . .2-14, 2-27
Passenger air bag and status light . . . . .1-57
Security indicator light. . . . . . . . . . . .2-17
Spotlights (See map light) . . . . . . . . .2-59
Warning/indicator lights and audible
reminders . . . . . . . . . . . . . . .2-10, 2-15
Lights . . . . . . . . . . . . . . . . . . . . . . .8-25
Map lights . . . . . . . . . . . . . . . . . .2-59
Lock
Child safety rear door lock . . . . . . . . . .3-7
Door locks . . . . . . . . . . . . . . . . . . .3-5
Glove box lock . . . . . . . . . . . . . . . .2-46
Lift gate release . . . . . . . . . . . . . . .3-27
Power door locks . . . . . . . . . . . . . . .3-6
Loose fuel cap warning. . . . . . . . . .2-28, 3-29
Low fuel warning light . . . . . . .2-12, 2-14, 2-26
Low tire pressure warning light . . . . . . . . .2-12
Low windshield-washer fluid warning
light . . . . . . . . . . . . . . . . . . . .2-14, 2-27
Luggage hook . . . . . . . . . . . . . . . . . .2-50
Luggage rack (see roof rack) . . . . . . . . . .2-51
Luggage (See vehicle loading information) . .9-13
M
Maintenance
General maintenance . . . . . . .
Inside the vehicle . . . . . . . . .
Maintenance precautions . . . . .
Outside the vehicle . . . . . . . .
Seat belt maintenance. . . . . . .
Under the hood and vehicle . . .
Maintenance requirements . . . . . .
Malfunction indicator light . . . . . . .
Manual front seat adjustment . . . . .
Map lights . . . . . . . . . . . . . . .
Map pocket. . . . . . . . . . . . . . .
Memory Seat . . . . . . . . . . . . . .
Meters and gauges . . . . . . . . . .
Instrument brightness control . . .
Mirror
Automatic anti-glare inside mirror.
Inside mirror . . . . . . . . . . . .
Outside mirrors . . . . . . . . . .
Vanity mirror . . . . . . . . . . . .
Mirrors . . . . . . . . . . . . . . . . .
Moonroof . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. .8-2
. .8-3
. .8-5
. .8-2
.1-24
. .8-4
. .8-2
.2-16
. .1-3
.2-59
.2-45
.3-36
. .2-3
.2-36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3-34
.3-33
.3-35
.3-33
.3-33
.2-54
N
NISSAN vehicle immobilizer
system . . . . . . . . . . . . . . . .2-29, 3-4, 5-13
NISSAN voice recognition system . . . . . .4-143
O
Octane rating (See fuel octane rating). . . . . .9-5
Odometer . . . . . . . . . . . . . . . . . . . . .2-4
Oil
Capacities and recommended
fuel/lubricants . . . . . . . . . . . . . . . . .9-2
Changing engine oil . . . . . . . . . . . . .8-10
Changing engine oil filter . . . . . . . . . .8-11
Checking engine oil level . . . . . . . . . . .8-9
Engine oil . . . . . . . . . . . . . . . . . . .8-9
Engine oil and oil filter recommendation . . .9-6
Engine oil viscosity . . . . . . . . . . . . . .9-6
One shot call . . . . . . . . . . . . . .4-120, 4-132
Outside mirrors . . . . . . . . . . . . . . . . .3-35
Overheat
If your vehicle overheats . . . . . . . . . . .6-11
Owner’s manual order form . . . . . . . . . . .9-32
Owner’s manual/service manual order
information . . . . . . . . . . . . . . . . . . . .9-32
Power steering system . . . . . . . . . . .5-41
Rear power windows . . . . . . . . . . . .2-53
Power inverter switch . . . . . . . . . . . . . .2-42
Power outlet . . . . . . . . . . . . . . . .2-43, 2-45
Power steering . . . . . . . . . . . . . . . . . .5-41
Power steering fluid . . . . . . . . . . . . . . .8-12
Precautions
Maintenance precautions . . . . . . . . . . .8-5
On-pavement and off-road driving
precautions . . . . . . . . . . . . . . . . . .5-6
Precautions on booster
seats . . . . . . . . . . .1-26, 1-33, 1-39, 1-45
Precautions on child
restraints. . . . . . . . .1-26, 1-33, 1-39, 1-45
Precautions on seat belt usage . . . . . . .1-17
Precautions on supplemental restraint
system . . . . . . . . . . . . . . . . . . . .1-48
Precautions when starting and driving . . . .5-2
Pre-tensioner seat belt system . . . . . . . . .1-64
Push starting . . . . . . . . . . . . . . . . . . .6-11
R
P
Parking
Parking brake operation . . . . . . . . . . .5-18
Parking/parking on hills . . . . . . . . . . .5-40
Phone, Bluetooth® hands-free
system . . . . . . . . . . . . . . . . .4-116, 4-130
Power
Front seat adjustment . . . . . . . . . . . . .1-5
Power door locks . . . . . . . . . . . . . . .3-6
Power outlet . . . . . . . . . . . . . .2-43, 2-45
Power rear windows . . . . . . . . . . . . .2-53
Power steering fluid . . . . . . . . . . . . .8-12
Radio
Car phone or CB radio. . . . . . . . . . .4-116
Compact Disc (CD) changer . . . . . . . .4-69
FM-AM radio with compact disc (CD)
changer . . . . . . . . . . . . . . . . . . . .4-66
FM/AM/SAT radio with CD/DVD player . .4-78
FM/AM/SAT radio with compact disc (CD)
player . . . . . . . . . . . . . . . . . . . . .4-71
Steering wheel audio control switch . . .4-102
Readiness for inspection maintenance (I/M)
test . . . . . . . . . . . . . . . . . . . . . . . .9-31
Rear power windows . . . . . . . . . . . . . .2-53
Rear sonar system . . . . . . . . . . . . . . . .5-47
RearView Monitor . . . . . . . . . . . . .4-21, 4-23
Rear window and outside mirror defroster
switch. . . . . . . . . . . . . . . . . . . . . . .2-33
Rear window wiper and washer switches . . .2-32
Recorders
Event data . . . . . . . . . . . . . . . . . .9-32
Refrigerant recommendation . . . . . . . . . . .9-7
Registering your vehicle in another country . .9-10
Remote Start . . . . . . . . . . . . . . .3-20, 5-14
Reporting safety defects (US only) . . . . . . .9-30
Roof rack . . . . . . . . . . . . . . . . . . . . .2-51
S
Safety
Child safety rear door lock . . . . . . . . . .3-7
Child seat belts . . . . .1-26, 1-33, 1-39, 1-45
Reporting safety defects (US only) . . . . .9-30
Seat adjustment
Front manual seat adjustment . . . . . . . .1-3
Front power seat adjustment . . . . . . . . .1-5
Second row bench seats . . . . . . . .1-7, 1-9
Seatback pockets . . . . . . . . . . . . . . . .2-46
Seat belt
Child safety. . . . . . . . . . . . . . . . . .1-24
Infants and small children . . . . . . . . . .1-25
Injured Person . . . . . . . . . . . . . . . .1-20
Larger children . . . . . . . . . . . . . . . .1-25
Precautions on seat belt usage . . . . . . .1-17
Pregnant women . . . . . . . . . . . . . . .1-20
Pre-tensioner seat belt system . . . . . . .1-64
Seat belt extenders . . . . . . . . . . . . .1-23
Seat belt maintenance. . . . . . . . . . . .1-24
Seat belts. . . . . . . . . . . . . . . . . . .1-17
10-5
Shoulder belt height adjustment . . . . . .1-23
Three-point type with retractor . . . . . . .1-20
Seat belt extenders . . . . . . . . . . . . . . .1-23
Seat belt warning light . . . . . . . . . .1-20, 2-14
Seats
2nd row bench seat adjustment . . . .1-7, 1-9
Adjustment. . . . . . . . . . . . . . . . . . .1-2
Armrests . . . . . . . . . . . . . . . . . . .1-10
Automatic drive positioner. . . . . . . . . .3-36
Front seats . . . . . . . . . . . . . . . . . . .1-2
Heated seats . . . . . . . . . .2-38, 2-39, 2-40
Manual front seat adjustment . . . . . . . . .1-3
Security indicator light. . . . . . . . . . . . . .2-17
Security system (NISSAN vehicle immobilizer
system), engine start . . . . . . . .2-29, 3-4, 5-13
Security systems
Vehicle security system . . . . . . . . . . .2-28
Self-adjusting brakes . . . . . . . . . . . . . .8-20
Service manual order form . . . . . . . . . . .9-32
Servicing air conditioner. . . . . . . . . . . . .4-50
Shoulder belt height adjustment . . . . . . . .1-23
Sonar
Rear system . . . . . . . . . . . . . . . . .5-47
Spark plug replacement . . . . . . . . . . . . .8-17
Spark plugs . . . . . . . . . . . . . . . . . . .8-17
Specifications . . . . . . . . . . . . . . . . . . .9-8
Speedometer . . . . . . . . . . . . . . . . . . .2-4
Spotlights (See map light) . . . . . . . . . . .2-59
SRS warning label . . . . . . . . . . . . . . . .1-65
Stability control . . . . . . . . . . . . . . . . .5-43
Starting
Before starting the engine. . . . . . . . . .5-13
Jump starting . . . . . . . . . . . . . .6-9, 8-16
Precautions when starting and driving . . . .5-2
Push starting . . . . . . . . . . . . . . . . .6-11
Starting the engine . . . . . . . . . . . . .5-14
10-6
Starting the engine . . . . . . . . . . . . . . .5-14
Steering
Heated steering wheel . . . . . . . . . . .2-41
Power steering fluid . . . . . . . . . . . . .8-12
Power steering system . . . . . . . . . . .5-41
Steering wheel audio control switch . . . . .4-102
Stop light . . . . . . . . . . . . . . . . . . . . .8-26
Storage . . . . . . . . . . . . . . . . . . . . . .2-45
Storage bin . . . . . . . . . . . . . . . . . . . .2-51
Sunglasses case. . . . . . . . . . . . . . . . .2-47
Sunglasses holder . . . . . . . . . . . . . . . .2-47
Sunroof (see Moonroof) . . . . . . . . . . . . .2-54
Sun visors . . . . . . . . . . . . . . . . . . . .3-32
Supplemental air bag warning labels . . . . . .1-65
Supplemental air bag warning light . . .1-65, 2-15
Supplemental front impact air bag system . . .1-55
Supplemental restraint system
Information and warning labels . . . . . . .1-65
Precautions on supplemental restraint
system . . . . . . . . . . . . . . . . . . . .1-48
Supplemental restraint system
(Supplemental air bag system) . . . . . . . . .1-48
Switch
Autolight switch . . . . . . . . . . . . . . .2-34
Automatic power window switch . . . . . .2-54
Fog light switch . . . . . . . . . . . . . . .2-37
Hazard warning flasher switch . . . . . . . .6-2
Headlight and turn signal switch . . . . . .2-33
Headlight control switch . . . . . . . . . .2-34
Instrument brightness control . . . . . . . .2-36
Power door lock switch . . . . . . . . . . . .3-6
Power inverter switch . . . . . . . . . . . .2-42
Rear window and outside mirror defroster
switch. . . . . . . . . . . . . . . . . . . . .2-33
Rear window wiper and washer switches .2-32
Tow mode switch . . . . . . . . . . . . . .2-43
Turn signal switch . . . . . . . . . . . . . .2-36
Vehicle dynamic control (VDC) off
switch. . . . . . . . . . . . . . . . . . . . .2-42
Wiper and washer switch . . . . . . . . . .2-30
T
Tachometer . . . . . . . . . . . . . . . . . . . .2-5
Temperature gauge
Engine coolant temperature gauge . . . . .2-5
Theft (NISSAN vehicle immobilizer system),
engine start . . . . . . . . . . . . .2-29, 3-4, 5-13
Three-way catalyst . . . . . . . . . . . . . . . .5-2
Tire
Flat tire . . . . . . . . . . . . . . . . . . . . .6-3
Spare tire . . . . . . . . . . . . . . . .6-4, 8-39
Tire and Loading Information label . . . . .9-12
Tire chains . . . . . . . . . . . . . . . . . .8-36
Tire pressure . . . . . . . . . . . . . . . . .8-29
Tire rotation. . . . . . . . . . . . . . . . . .8-36
Tires of 4-wheel drive . . . . . . . . . . . .8-38
Types of tires . . . . . . . . . . . . . . . . .8-35
Uniform tire quality grading . . . . . . . . .9-29
Wheels and tires . . . . . . . . . . . . . . .8-29
Wheel/tire size. . . . . . . . . . . . . . . . .9-9
Tire pressure
Low tire pressure warning light . . . . . . .2-12
Tire Pressure Monitoring System (TPMS) . . . .5-3
Top tether strap child restraint . . . . . . . . .1-31
Towing
4-wheel drive models . . . . . . . . . . . .6-13
Flat towing . . . . . . . . . . . . . . . . . .9-28
Towing load/specification . . . . . . . . . .9-20
Tow truck towing. . . . . . . . . . . . . . .6-12
Trailer towing . . . . . . . . . . . . . . . . .9-17
Towing a trailer . . . . . . . . . . . . . . . . . .9-17
Tow mode switch . . . . . . . . . . . . . . . .2-43
Transceiver
HomeLink® Universal
Transceiver . . . . . . .2-60, 2-61, 2-62, 2-63
Transmission
Continuously Variable Transmission (CVT)
fluid . . . . . . . . . . . . . . . . . . . . . .8-12
Driving with Continuously Variable
Transmission (CVT) . . . . . . . . . . . . .5-15
Travel (See registering your vehicle in another
country). . . . . . . . . . . . . . . . . . . . . .9-10
Trip odometer . . . . . . . . . . . . . . . . . . .2-4
Turn signal switch . . . . . . . . . . . . . . . .2-36
Vehicle identification number (VIN) plate. . . .9-10
Vehicle immobilizer system . . . . .2-29, 3-4, 5-13
Vehicle loading information . . . . . . . . . . .9-13
Vehicle recovery. . . . . . . . . . . . . .6-14, 6-15
Vehicle security system . . . . . . . . . . . . .2-28
Vehicle security system
(NISSAN vehicle immobilizer system), engine
start. . . . . . . . . . . . . . . . . .2-29, 3-4, 5-13
Ventilators . . . . . . . . . . . . . . . . . . . .4-37
Visors . . . . . . . . . . . . . . . . . . . . . . .3-32
Voice Prompt Interrupt . . . . . . . .4-120, 4-132
Voice recognition system . . . . . . . . . . .4-143
U
Warning
Air bag warning light . . . . . . . . .1-65, 2-15
Anti-lock brake warning light . . . . . . . .2-11
Battery charge warning light . . . . . . . .2-12
Blind Spot Intervention (BSI) warning
light . . . . . . . . . . . . . . . . . . . . . .5-19
Blind Spot Warning (BSW) warning
light . . . . . . . . . . . . . . . . . . . . . .5-19
Brake warning light . . . . . . . . . . . . .2-11
Engine oil pressure warning light . . . . . .2-12
Hazard warning flasher switch . . . . . . . .6-2
Loose fuel cap warning. . . . . . . .2-28, 3-29
Low fuel warning light . . . . .2-12, 2-14, 2-26
Low tire pressure warning light . . . . . . .2-12
Low windshield-washer fluid warning
light . . . . . . . . . . . . . . . . . .2-14, 2-27
Passenger air bag and status light . . . . .1-57
Seat belt warning light . . . . . . . .1-20, 2-14
Supplemental air bag warning
light . . . . . . . . . . . . . . . . . .1-65, 2-15
Uniform tire quality grading . . . . . . . . . . .9-29
USB interface . . . . . . . . . . . . . . .4-87, 4-88
Audio file operation . . . . . . . . . .4-87, 4-89
Video file operation . . . . . . . . . . . . .4-90
V
Vanity mirror . . . . . . . . . . . . . . . . .
Variable voltage control system . . . . . . .
Vehicle dimensions and weights . . . . . .
Vehicle dynamic control (VDC) off switch .
Vehicle dynamic control (VDC) system. . .
Vehicle Dynamic Control (VDC) system . .
Vehicle identification . . . . . . . . . . . . .
Vehicle identification number (VIN) . . . . .
Vehicle identification number (VIN)
(Chassis number) . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.3-33
.8-17
. .9-9
.2-42
.5-43
.5-43
.9-10
.9-10
. .9-10
W
Vehicle security system . . . . . . . . . . .2-28
Warning/indicator lights and audible
reminders . . . . . . . . . . . . . . .2-10, 2-15
Warning labels (for SRS) . . . . . . . . . .1-65
Warning/indicator lights and audible
reminders . . . . . . . . . . . . . . . . .2-10, 2-15
Audible reminders . . . . . . . . . .2-10, 2-15
Indicator lights . . . . . . . . . . . .2-10, 2-15
Warning lights. . . . . . . . . . . . .2-10, 2-15
Warning lights. . . . . . . . . . . . . . .2-10, 2-15
Washer switch
Rear window wiper and washer
switches . . . . . . . . . . . . . . . . . . .2-32
Wiper and washer switch . . . . . . . . . .2-30
Weights (See dimensions and weights) . . . . .9-9
Wheels and tires . . . . . . . . . . . . . . . . .8-29
Wheel/tire size. . . . . . . . . . . . . . . . . . .9-9
When traveling or registering your vehicle in
another country . . . . . . . . . . . . . . . . .9-10
Windows . . . . . . . . . . . . . . . . . . . . .2-52
Locking passengers’ windows . . . . . . .2-53
Power rear windows . . . . . . . . . . . . .2-53
Rear power windows . . . . . . . . . . . .2-53
Windshield-washer fluid. . . . . . . . . . . . .8-13
Windshield wiper blades . . . . . . . . . . . .8-19
Wiper
Rear window wiper and washer
switches . . . . . . . . . . . . . . . . . . .2-32
Wiper and washer switch . . . . . . . . . .2-30
Wiper blades. . . . . . . . . . . . . . . . .8-19
Wiper and washer switch . . . . . . . . . . . .2-30
10-7
GAS STATION INFORMATION
RECOMMENDED FUEL
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91).
CAUTION
● Only vehicles with the E-85 filler door
label can operate on E-85. Fuel system
or other damage can occur if E-85 is
used in vehicles that are not designed
to run on E-85.
● Using a fuel other than that specified
could adversely affect the emission
control system, and may also affect the
warranty coverage.
● Under no circumstances should a
leaded gasoline be used, because this
will damage the three-way catalyst.
● Do not use E-15 or E-85 fuel in your
vehicle. Your vehicle is not designed to
run on E-15 or E-85 fuel. Using E-15 or
E-85 fuel in a vehicle not specifically
designed for E-15 or E-85 fuel can adversely affect the emission control devices and systems of the vehicle. Damage caused by such fuel is not covered
by the NISSAN new vehicle limited
warranty.
● U.S. government regulations require
ethanol dispensing pumps to be identified by a small, square, orange and
black label with the common abbreviation or the appropriate percentage for
that region.
ENGINE OIL RECOMMENDATION:
• Genuine NISSAN engine oil or equivalent
• Engine oil with API Certification Mark
• Viscosity SAE 0W-20
For additional information, refer to “Engine oil and
oil filter recommendations” in the “Technical and
consumer information” section of this manual.
COLD TIRE PRESSURE:
Refer to Tire and Loading Information label.
The label is typically located on the driver side
center pillar or on the driver’s door. For additional
information, refer to “Wheels and tires” in the
“Maintenance and do-it-yourself” section of this
manual.
RECOMMENDED NEW VEHICLE
BREAK-IN PROCEDURE:
During the first 1,200 mi (2,000 km) of vehicle
use, follow the break-in procedure recommendations for the future reliability and economy of your
new vehicle. For additional information, refer to
“Break-in schedule” in the “Starting and driving”
section of this manual. Follow these recommendations for the future reliability and economy of
your new vehicle. Failure to follow these recommendations may result in vehicle damage or
shortened engine life.
Printing : April 2015 (07)
0R52U2
Publication No.: OM15EA
OM1E 0R51U0
Printed in U.S.A.
R52-D
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising