PRODUCT SPECIFICATION camera solutions PT280-24P Pan/Tilt INDOOR, LIGHT DUTY, FEEDTHROUGH Product Features • “Mini” Pan/Tilt • 24 VAC Operation • Indoor Applications • Inverted Operation • Prewired for Zoom Lens, Camera Power and Video • High Speed Pan Movement (12°/sec ±1°) • Capable of Auto/Random Scan Operation When Used with Appropriate Control • Maximum Load 15 lb (6.8 kg) The PT280-24P is a “mini” light duty, indoor pan/tilt that is factory prewired for feedthrough of all control functions (pan/tilt, motorized zoom lens, 24 VAC camera power, and video). All connections are made at the input connector, eliminating the need for wiring harnesses made in the field. This feature greatly reduces installation time, while increasing the reliability and serviceability of the system. Ø 0.28 X 2.50 (0.71 X 6.35) OB SLOT 4.50 (11.43) 3.50 (8.89) The PT280-24P will accept a maximum load of 15 pounds (6.8 kg) and is ideally suited for use with our EH3010/EH3014 and other small enclosures. 7.00 (17.78) 8.00 (20.32) LENS CONNECTOR The unit is also capable of auto/random scan operation when used with our MPTAZ24DT control. 22" (55.88) LONG FEEDTHROUGH CABLE 7.88 (20.02) 1/4-20 X 3/8" USABLE THD EQ SP ON 1.00 (2.54) B.C. 3X Ø 3.00 (7.62) NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES. International Standards Organization Registered Firm; ISO 9001 Quality System C324 / REVISED 10-12-10 TECHNICAL SPECIFICATIONS MODEL PT280-24P CERTIFICATIONS/RATINGS Light duty mini pan/tilt, 24 VAC • CE, Class B • UL Listed • Meets NEMA Type 1 standards 24 VAC RECOMMENDED CONTROLS ELECTRICAL Input Voltage Power Requirements (Running) Pan Tilt (Starting) Pan Tilt Connector 0.31 A (7.5 VA) 0.38 A (9.2 VA) 0.47 A (11.2 VA) 0.56 A (13.5 VA) AMP CPC type (mate supplied), installed onto a pigtail exiting from the base of the unit (all functions, camera power, lens, video, pan/tilt) Video Connector BNC Camera Power Spade lugs Motors Two-phase induction type, instantaneous reversing Limit Switches 5 A each (pan/tilt); external adjustment Conductor Requirements As listed, plus coaxial cable: Pan/Tilt 5 plus ground Lens 4 Camera AC 2 Maximum Operating Distances* Cable Size Maximum Distance 110 ft (34 m) 5 Conductors 20 AWG (0.5mm2) 180 ft (55 m) 18 AWG (1.0mm2) 16 AWG (1.5mm2) 290 ft (88 m) 20 AWG (0.5mm2) 210 ft (64 m) 6 Conductors† 18 AWG (1.0mm2) 330 ft (101 m) 16 AWG (1.5mm2) 530 ft (162 m) Coaxitron® or Matrix MPT24DT MPTAZ24DT Refer to individual spec sheets for information. Desktop control for 24 VAC pan/tilt. Desktop pan/tilt and zoom lens control with auto/random scan for 24 VAC pan/tilts. RECOMMENDED ENCLOSURES EH3010/EH3014 EH4010/EH4014 EH3508/EH3512 Small, indoor enclosure Small, indoor enclosure Small, indoor/outdoor enclosure RECOMMENDED MOUNTS PM105 PM14 Medium duty wall mount; maximum load 40 lb (18.14 kg) Light duty wall mount; maximum load 20 lb (9.07 kg) *Distances are calculated with both motors (pan and tilt) running and assuming a 10% voltage drop. † Using 2-wire motor common. MECHANICAL Pan Speed Tilt Speed Maximum Load Gearing Bearings Pan Tilt Duty Cycle 0 to 355° movement in horizontal plane 12°/sec ±1° ±90° movement in vertical plane 3°/sec ±0.5° 15 lb (6.8 kg) at 2" (5.08 cm) from tilt table surface to center of gravity (upright or inverted) Chain and sprocket final drive Heavy duty ball bearings Oilite bronze bushing 50% duty cycle; 30 minute rating GENERAL Construction Finish Environment Unit Weight Shipping Weight Aluminum plate, all internal parts corrosion protected Gray polyester powder coat Indoor; 32° to 120°F (0° to 49°C) 9 lb (4 kg) 11 lb (4.9 kg) Pelco, Inc. Worldwide Headquarters: 3500 Pelco Way, Clovis, California 93612-5699 USA USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150 International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120 www.pelco.com Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice. ©Copyright 2010, Pelco, Inc. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project