615P-1 - Visicom
. . . light years ahead™
615P-1
Product
Specification
Description: 615P-1 Power Supply
Features
Description
✔
✔
✔
✔
✔
✔
The 615P-1 Module Power Supply is designed to supply
most Fiber Options standalone modules. It has a
maximum output of 800mA. The 615P-1 can accept any
AC voltage input between 100 and 240 V, 50-60 Hz.
Universal 100V-240V, 50-60 Hz input
15VDC 800mA output
Screw fixing holes
Includes mains lead
Small size
Forever Warranty™
All 615P-1 supplies are supplied with a mains lead. In
the UK this lead comes with a 3 pin mains plug with
integral fuseholder. To all other countries a mains lead
with a continental style 2 pin euro plug is supplied.
The units' small and compact style means that it is
suitable for most applications. The unit has four screw
holes for fixing.
continued
Basic Model Description
615P-1 Power supply for Fiber Options standalone modules.
www.fiberoptions.com
Fiber Options 80 Orville Drive, Bohemia NY 11716-2533
info@fiberoptions.com
US Tel: 631-567-8320 or 800-342-3748
Fax: 877-FiberFax (877-342-3732 toll free) or 631-567-8322
UK Tel: +44 113 238 1668 Fax: +44 113 253 8121
Australia Tel: +61 3 9370 9192 Fax: +61 3 9370 9936
Hong Kong Tel: +852 2907 8108 Fax: +852 2142 5063
MODEL 615P-1
Description (continued)
The Power Factor
The Power Factor has been developed as an aid in
determining what combination of modules can be
supported by a specific model of power supply.
To use it, add up the numbers in the Power Factor column of the Fiber Finder. The total for a given unit must
be less than or equal to the power supply Power
Factor.
TABLE 1: CURRENT/POWER FACTOR VALUES
Current
Power
Factor
Current
Power
Factor
0 - 125 mA
1
751 - 875 mA
7
126 - 250 mA
2
876 - 1000 mA
8
251 - 375 mA
3
1.001 - 1.125 A
9
376 - 500 mA
4
1.126 - 1.250 A
10
501 - 625 mA
5
1.251 - 1.375 A
11
626 - 750 mA
6
1.376 - 1.500 A
12
Power Factor Examples
Example 1:
You want to install some S730DVT transmitters
at the same location. Can you power more
than one S730DVT from a single 615P-1?
2
Example 2:
You want to install some S711D transceivers
at the same location. Can you power more
than one S711D from a single 615P-1?
The S730DVT power factor is PF 6.
The S711D power factor is PF 2.
615P-1 = PF 6, so only one S730DVT can be
powered by the 615P-1.
615P-1 = PF 6, so three S711D units can be
powered by the 615P-1.
www.fiberoptions.com
MODEL 615P-1
TECHNICAL INFORMATION
ELECTRICAL
100-240 VAC
Input Voltage:
Input Power
Frequency:
Current Requirement:
50-60 Hz
300mA
Power Factor:
6
Output Voltage: 15 VDC
Output Current: 800mA maximum
Fuse Type or Size: 5 X 20 mm, located in a
fuseholder on rear of plug (UK only)
Fuse Rating: 2.0 A, 250 V
MECHANICAL
Dimensions:
Weight:
Length: 92 mm
Width: 40 mm
Height: 27.5 mm)
0.4 lb (0.2 kg)
Construction:
PBT/PC
Finish:
Black
Mounting Method: 4 screws in mounting plate
CONNECTORS
LEADS
Output Power:
Input Power
Emissions:
Immunity:
Two core cable
Positive lead has marking ridge
Lead length = 2000mm
Mains Lead - UK or Continental
style
Lead length = 1000mm
FCC Part 15, ICES-003,
AS/NZS 3548, EN55022
ENVS0204
EN61000-4-2, 3, 4, 5, 6, 11
Power Input:
2-pin IEC 60320 C8
Power Output:
Detachable 2-conductor cable
supplied.
2-conductor lead
Safety:
MTBF:
UL1950, CAN/CSA 22.2,
NO.950-95
>100,000 hours
THE FOREVER WARRANTY
Fiber Options warrants that, at the time of shipment, the products manufactured by Fiber Options will be free from defects in material and workmanship. Should any defects appear
in the product, Fiber Options shall repair or replace the product or supply an equivalent, at its sole discretion. A Return Authorization (RA) number is required to send the unit back in case
return is necessary. Return shipments to Fiber Options shall be at the buyer’s expense. Fiber Options will return said equipment prepaid via best way.
THIS WARRANTY IS THE SOLE WARRANTY OF FIBER OPTIONS WITH RESPECT TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ANY AND ALL OTHER EXPRESSED OR
IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PURPOSE. THIS WARRANTY IS THE SOLE REMEDY AVAILABLE FOR
ANY CLAIM BASED ON AN ALLEGED DEFECT IN MATERIAL OR WORKMANSHIP WHETHER SUCH CLAIM ARISES IN CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE. FIBER OPTIONS SHALL NOT BE LIABLE IN ANY WAY FOR ANY CONSEQUENTIAL DAMAGE RESULTING FROM ANY DEFECT COVERED BY THIS WARRANTY.
3
MODEL 615P-1
TECHNICAL INFORMATION
www.fiberoptions.com
Fiber Options 80 Orville Drive, Bohemia NY 11716-2533
info@fiberoptions.com
US Tel: 631-567-8320 or 800-342-3748
Fax: 877-FiberFax (877-342-3732 toll free) or 631-567-8322
UK Tel: +44 113 238 1668 Fax: +44 113 253 8121
Australia Tel: +61 3 9370 9192 Fax: +61 3 9370 9936
Hong Kong Tel: +852 2907 8108 Fax: +852 2142 5063
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising