Specialty BW.indd - The Lighting Quotient

Specialty BW.indd - The Lighting Quotient
Library Lighting
Style 3030
T5 Fluorescent
T8 Fluorescent
Stack light
Pendant Stems
1:8 Scale
5-1/8"
(130mm
A
E
F
B
C
Stack Light Style 3030
(X mount)
C
D
6-1/2"
(165mm)
Top View
D
48" (1220mm), 96" (2440mm)
1/8" (3mm)
Decorative
End Plate
Installation
(S mount)
3"
(76mm)
G
2" (51mm)
End of row
Cables
(S mount)
1. Secure mounting
plate to ceiling
(fasteners by
others)
J
2. Hang housing,
connect supply
(X mount)
3. Hinge up,
secure with
screws.
L
K
H
2" (51mm)
End of row
1"
(25mm)
Specifications
A Extruded aluminum
mounting plate
B Electronic ballast
C Specular extruded
aluminum reflector
housing
Features
D Snap-in semi-specular parabolic cross-baffle, blades
1-1/2" o.c., 25° shielding
E Aluminum decorative end plate
(3 profiles – order separately)
F Aluminum joiner/reveal plates
Finish:
Semi-gloss white or bright clear anodized aluminum housing
with semi-gloss white or black reveal plates. White or silver
decorative end plates (order separately).
Painted surfaces – 6 stage pretreatment and electrostatically
applied thermoset powdercoat for stable, long lasting finish.
Reflector – extruded high purity aluminum with clear anodized
specular finish. All luminaire hardware – stainless steel.
Cross-baffle – injection molded high-impact polycarbonate with
metalized semi-specular finish.
Mounting:
S mount – mounting plate fastens flush to ceiling. Unit hinges
on plate for hands-free access to wiring.
X mount – pendant stems, cables ordered separately.
Pendant stem – 11/16" O.D. aluminum, internally threaded.
5" dia. aluminum canopy.
Cable – 1/16" dia. 7x7 aircraft cable, field adjustable length.
Crossbar with 1/4-20 stud and 5" dia. canopy.
For shelf supported bridge or cantilever, consult factory.
10/14
U.S. Patent 7,708,430
G Mounting holes, 9/32"
(7mm) dia. (S mount)
H Knockout, (2) 7/8"
(22mm) dia. (S mount)
J Structure, fasteners
(by others)
K Conduit, connector
(by others)
L 18/4 cord with cable
clips (cable mount)
Electrical:
Use 90°C wire for supply connections and through wire.
S mount – 7/8" (22mm) dia. knockouts at ends of mounting
plate for conduit feed (by others).
X mount – electrical feed hanger mounts over recessed outlet
box (by others) and must be located at end of row.
Housing hinges down for access to ballast and wiring. Optional
#12 AWG prewired modular through wiring with quick
connectors.
Integral electronic HPF thermally protected class P ballast with
end-of-life protection.
Optional integral emergency battery operates one lamp.
Separate unswitched supply is required.
Optional integral motion sensor, consult factory.
Standard:
UL listed or CSA certified.
 Exceeds IESNA recommended light level – 30fc vertical at
30" AND complies with energy standards (T5)
 Precise extruded reflector drives light to the bottom
shelf – maximizes visibility of books and shelf utilization
 Innovative variable width cross-baffle – redirects wasted light
 Optional emergency battery; motion sensor (consult factory)
Performance
Multiple reflector
segments drive light
to the lowest shelves.
Unique cross-baffle
redirects a portion of
the lamp energy that
otherwise goes directly
to the floor back into
the main beam while
providing lengthwise
shielding. The result is
high beam efficiency
and superior surface
uniformity in tall,
narrow stacks.
For complete photometrics,
visit thelightingquotient.com
1x28W
T5
1800 Cd
L
1.0
To Order
Stack Light Style 3030
Project:
To form a Catalog Number
3 0 3 0-
-
1
2
3
4
5
6 Option (See Accessories Section for specifications)
6
7
1 Style
3030 = Stack light, integral ballast
2 Lamp
= Lamp Code
Lamp Wattage (see chart below)
Length*
Example: T228 = 8’ (2.4m) housing
with two 28W T5 lamps (end-to-end)
Code
Linear Fluorescent
36" (915mm)
48" (1220mm)
72" (1830mm)
96" (2440mm)
T121
T128
T221
T228
T5
Lamp(s)
1 x F21T5
1 x F28T5
2 x F21T5
2 x F28T5
Code
A125
A132
A225
A232
T8
Lamp(s)
1 x F25T8
1 x F32T8
2 x F25T8
2 x F32T8
For complete lamp and ballast information, see Accessories Section.
Standard T5 lamp color is 3000K/80+ CRI.
*Add 1/4" (6mm) to row or single unit for ADE Decorative End Plates.
L
1.1
00 = No option
0E = Integral emergency battery pack with indicator lamp
and test button. Operates one lamp. Not for use with 2ft
and 3ft units.
0K = Prewired modular #12 AWG through wiring with quick
connectors
EK = Combination emergency battery and modular thru wire.
Not for use with 2ft and 3ft units.
XX = For modification not listed, include detailed description.
Consult factory prior to specification.
Hangers
Order separately. See Accessories Section for specifications.
Singles – order one non-electrical and one electrical feed
hanger for each unit (X mount).
Rows – order one non-electrical hanger for each unit
(X mount) plus one electrical feed for each row.
Electrical feed(s) must be located at an end of row.
VE
0 = Pendant stem,
11/16" O.D.
Length in inches, up to
60" (1.5m), 6" minimum
01 = Silver canopy & stem
02 = White canopy & stem
99 = Custom RAL or
computer matched
color to be specified
F = Non-electrical
G = Electrical feed,
with (4) #14 AWG leads
VE
0 = Cable support,
field adjustable
48 = up to 48" (1.2m)
96 = up to 96" (2.4m)
02 = White canopy
99 = Custom RAL or computer
matched color to be specified
R = Non-electrical
S = Electrical feed,
18/4 metal braid cord
7 Destination Requirement
Number of Lamps in Length, specify 1 or 2
A = T8 Fluorescent
T = T5 Fluorescent
Type:
3 Mounting
S = Ceiling (surface) mount
X = For use with pendant stem or cable hangers
Note: Order hangers separately
For shelf supported bridge or cantilever mount, consult factory.
0 = UL listed or CSA certified for U.S.
J = UL listed or CSA certified for Canada
Example
3030 - T228 - S - 02 - 1 - 0E0
Stack light for use with two 4' F28T5 lamps. 96" long housing
(not including decorative end plates). Ceiling (surface) mount.
Semi-gloss white. Integral 120V electronic 2-lamp ballast. UL
listed or CSA certified for U.S. Optional battery pack. Order
decorative end plates separately.
Accessories
Order separately. See Accessories Section for specifications.
ADE
0 = Decorative end plates, pair, silver,
white, or custom color to match housing.
Note: required for each row or single
unit. Adds 1/4" (6mm) to length.
30 = Contoured
31 = Concave
32 = Convex
4
VC3
5 Voltage/Ballast
Electronic
1 = 120V
2 = 277V
3 = 347V (Canada)
10/14
AFK000X
= Ballast fuse kit
0 = U.S.
J = Canada
AMU = Modular uplight, low-profile
symmetrical reflector piggybacked on top of mounting plate.
For use with X mount stem or
cable only. May be switched
separately.
= Cantilever, for stack mounting,
two shown below
0 = U.S.
J = Canada
XX = Consult factory for complete
specifications and ordering information
Semi-gloss white
Silver
Semi-gloss black
Custom/special finish
XX
4 Finish
01 = Bright clear anodized reflector with black reveals
(matching ADE end plates are silver – order separately)
02 = Semi-gloss white
(matching ADE end plates are white – order separately)
99 = Custom RAL or computer matched color to be
specified, consult sales representative
Length,
ceiling
to top of
housing
02
07
08
99
=
=
=
=
Note: Consult factory for
complete specifications
and ordering information.
AOS = Accessory Occupancy Sensor (consult factory for
complete specifications and ordering information).
elliptipar from The Lighting Quotient
114 Boston Post Road, West Haven, Connecticut 06516, USA
Voice 203.931.4455  Fax 203.931.4464  thelightingquotient.com


Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change
without notice. Copyright © 2014 Sylvan R. Shemitz Designs, Inc., all rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising