Resolution 2 - Funktion
Resolution 2
The Resolution 2 is an entirely horn-loaded, surprisingly compact, full range loudspeaker enclosure. The
driver complement comprises a 15” for bass, an 8” for midrange and a 1” for high frequencies. Funktion
One’s waveguide and driver technology produces clear, involving and powerful sound. The R2’s unique
combination of size, high efficiency and sonic excellence make it ideally suited to a wide range of uses. This
loudspeaker resolves the requirement for quality, response and level from a small source.
Resolution 2 systems can be supplemented with additional Funktion One bass including Infrabass, F218s
and F121s. A slightly larger horizontal version (R2U) is available for installation in venues with low ceiling
heights.
Features:
· Full range, stand alone enclosure
· Fully horn loaded for high efficiency
· Three-way bi-amped (passive HF)
· Funktion One designed drivers
· Complete range of flying and mounting options
· Fitted with M10 flypoints
· Optional Wheelboard
· Optional scrim for discrete appearance
· R2S8, R2SH and R2EH mid/mid-high
versions also available
Driver
15”
8”
1”
Operating
Band*
Sensitivity
(1W at 1m)
Power
(rms**)
Nominal
Impedance
28 - 250Hz
250 - 6k5Hz
6k5Hz - up
102dB
106dB
107dB
400W
200W
50W
8Ω
} 12Ω Total
*Please check website for latest crossover settings
**AES rated
50Hz - 18kHz
Frequency Response ±3dB:
48kg (106lbs)
Weight (without wheelboard):
50° Horizontal x 25° Vertical
Nominal Dispersion:
2 x Speakon NL4
Connectors:
+44 (0) 1306 712820
©Funktion One Research Ltd 1999 - 2011
HC2
HC2 Scaffold Clamp used to attach YS2 or YU2 to Scaff bar.
WM2
WM2 Wall Mount Kit used in conjunction with YS2 Yoke. (If arm is
perpendicular to wall then the Resolution 2 can be angled down with a
maximum angle of 30 degrees).
YS2
YS2 Simple Yoke picks up the Resolution 2 from above, attaching to
SB2 Squaring Brackets on each side of the enclosure. This is suited to
top support, tilt down applications.
SB2-K
SB2-K Squaring Brackets attach to both sides of the Resolution 2
providing parallel surfaces to accept either type of yoke (YS2 or YU2).
FB21 Single Flybar provides an alternative single point lifting method
and attaches to internal plates at the top of the Resolution 2.
FB21
YU2 Universal Yoke has stronger arms than the YS2 and can also be
used to support the R2 from underneath. It has clearance to allow the
cabinet to fully rotate between the supporting arms and attaches to the
R2 via Squaring Brackets. For stand mounting the YU2 should be
ordered with the SA 14/2E HD Stand Top Adaptor.
Loudspeaker Stand available on request.
FB23M Three-Wide Multi-Point Flybar (see below) facilitates flexible 1,
2 or 3 wide, single row flying as shown below. (Two wide use shown to
different scale).
FB22 Dedicated Two-Wide Flybar (not shown) uses the same design
principles employed in the FB23M.
YU2
FB23 Dedicated Three-Wide Flybar (not shown). Does not fly two
wide.
SA14/2E HD
©Funktion One Research Ltd 1999 - 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising