Data Sheet Transmitter AMU Pharmacon

Data Sheet Transmitter AMU Pharmacon
SWAN Analytical USA
229 Larkin Dr, Wheeling IL 60090
Tel. 847-229-1290 Fax 847-229-1320
www.swan-analytical-usa.com
info@swan-analytical-usa.com
Transmitter AMU Pharmacon
Data sheet No. DenA13680XXX
Electronic transmitter & controller for the measurement of the conductivity in purified
water and water for injection of pharmaceutical water.
Transmitter AMU Pharmacon
 Measuring and control transmitter for panel installation in a Noryl® resin enclosure,
96 x 96 x 120 mm (DIN 43700).
 Measurement range:
0.005 to 2’000 S/cm
 Connections for a 2-electrode conductivity sensor with integrated Pt1000 temperature probe
(e.g. Swansensor Pharmacon) and for a digital
SWAN sample flow meter.
 Big backlit LC display for measuring value, sample temperature, sample flow and operating status.
 Easy user menus in English, German, French
and Spanish. Simple programming of all parameters by keypad.
 Wide range of selectable temperature compensations for different sample conditions.
 Data logger for 1’500 data records stored at a
selectable interval. Serial interface included for
data download to PC with Microsoft HyperTerminal.
 Galvanically separated sensor connection.
 Overvoltage protection for in- and outputs.
 Two current outputs (0/4 - 20 mA) for measured
signals.
 Potential-free alarm contact as summary alarm
indication for programmable alarm values and
for instrument faults.
 Two potential-free contacts programmable as
limit switch or PID-control.
 Input for potential-free contact to freeze the
measuring value or to interrupt control in automated installations (hold function or remote-off).
Front panel
SENSOR
LINE
RS232
RELAYS - INPUT - SIGNAL OUT
OPTION
PROFIBUS or MODBUS
SHIELD
Rear panel with electrical connections
Order scheme
Transmitter AMU Pharmacon
A–13.680.
X
X
X



Power supply ………………….. 100 - 240 VAC / 50/60 Hz ……………………………………………............. 1

24 VDC, direct current ………………………………...………………………. 2

Alarm Relay ……………………. Normally open, Alarm closed (NO = standard) …………………………………….. 0
Normally closed, Alarm open (NC) ………………………………………………….. 1
Communication option ………. None …………………………………………………………………………………….…......
Profibus DP interface ………………………………………………………………..............
Modbus interface (for Webserver connection) ..............................................................
03/2011 Subject to change without notice


0
2
4
DUSA13680XXX_Transmitter_AMU_Pharmacon
SWAN Analytical USA
229 Larkin Dr, Wheeling IL 60090
Tel. 847-229-1290 Fax 847-229-1320
www.swan-analytical-usa.com
info@swan-analytical-usa.com
Conductivity Measurement
Conductivity sensor type
for
2-electrode
inline
Pharmacon (k= 0.1cm-1).
Transmitter AMU Pharmacon
Data sheet No. DenA13680XXX
Electrical Connection Scheme
sensor
Sensor cell constant
selectable from 0.005 to 1.000 cm-1
Measuring range
Resolution
0.005 to 0.999 S/cm
0.001 S/cm
1.00 to 9.99 S/cm
0.01 S/cm
10.0 to 199.9 S/cm
0.1 S/cm
200 to 2000 S/cm
1 S/cm
Automatic range switching.
System accuracy
0.05 to 500 S/cm
±2%
500 to 2000 S/cm
±3%
or ± 0.001 S/cm whichever is greater.
Greatest long-term stability by
auto-zero front-end calibration procedure.
Test modus for transmitter according to USP<645> with test resistance.
Alarm function for limit values according to USP<645> Stage 1.
Temperature compensations
- High purity water (non-linear)
- Neutral salts (NaCl)
- Strong acids (HCl)
- Strong bases (NaOH)
- Linear coefficient: in %/°C
- None (compensation switched off)
Temperature measurement
with Pt1000 sensor (DIN class A)
Measuring range:
-30 to +250 °C
Resolution:
0.1 °C
Sample flow measurement
Input for digital sample flow sensor.
Transmitter Specifications
and Functionality
Electronics case:
Noryl® resin
Protection degree:
IP54 (front)
Display:
backlit LCD, 75 x 45 mm
Electrical connectors:
clamping yoke
Dimensions:
96 x 96 x 120 mm
Weight:
0.45 kg
Ambient temperature:
-10 to +50 °C
Humidity: 10 - 90% rel., non-condensing
Power supply
Voltage:
100 - 240 VAC ( 10 %),
50/60 Hz ( 5 %)
or 24 VDC ( 15 %)
Power consumption:
max. 8 VA
03/2011 Subject to change without notice
Operation
Easy operation based on separate
menus for “Messages”, “Diagnostics”, “Maintenance”, “Operation” and
“Installation”.
1 Input
One input for potential-free contact.
Programmable hold or remote off
function.
User menus in English, German,
French and Spanish.
Separate menu specific password
protection.
2 Relay outputs
Two potential-free contacts programmable as limit switches for measuring values, controllers or timer for
system cleaning with automatic hold
function.
Maximum load:
100 mA / 50 V
Display of process value, sample
flow, alarm status and time during
operation.
Storage of event- and alarm log.
Storage of the last 1’500 data records in logger with selectable time
interval.
Safety features
No data loss after power failure, all
data is saved in non-volatile memory.
Overvoltage protection of in- and outputs.
Galvanic separation of measuring inputs and signal outputs.
Transmitter temperature monitoring with programmable high/low
alarm limits.
Real-time clock with calendar
For action time stamp and preprogram-med actions.
1 Alarm relay
One potential free contact for summary alarm indication for programmable alarm values and instrument
faults.
Maximum load:
100 mA / 50 V
2 Signal outputs
Two programmable signal outputs for
measured values (freely scaleable,
linear or bilinear) or as continuous
control outputs (control parameters
programmable).
Current loop:
0/4 - 20 mA
Maximum burden:
510 
Control functions
Relays or current outputs programmable for 1 or 2 pulse dosing pumps,
solenoid valves or for one motor
valve.
Programmable P, PI, PID or PD
control parameters.
1 serial interface RS232
For data logger download to PC
using Microsoft HyperTerminal and
for transmitter firmware updates.
1 serial interface RS485 (option)
With Fieldbus protocol Modbus or
Profibus DP, galvanically separated.
Remote instrument access with PC
re-quires Modbus interface and optional Webserver
DUSA13680XXX_Transmitter_AMU_Pharmacon
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising