LiftMaster WKP5LM3 installation manual

LiftMaster WKP5LM3 installation manual
Models WKP5LM3 & WKP250LM3
Wireless Keypad
®
Overview
Initial Setup
The Wireless Keypad uses a digitally secure intercom
link that allows it to control one access point. The
Wireless Keypad is compatible with various LiftMaster
Wireless Products.
Model WKP5LM3 can hold up to 5 PIN Numbers.
Model WKP250LM3 can hold up to 250 PIN Numbers.
Step 1: On keypad press:
#
#
#
Step 2: Enter 4 digit Master PIN Number.
Example: 1234.
?
Carton Inventory
?
?
?
NOTE: “ * “ is the cancel button that will cancel any
call or key sequence.
Bolt (4)
1
2
3
4
5
6
7
8
9
*
0
#
C ncel
Keypad
Screw (4)
Program Pre-Installed LiftMaster Receiver
Washer (4)
Step 1: Pry open the front
panel of the receiver case
with a coin or a screwdriver.
Allen Wrench
Nut (4)
Indicator Light
Learn Button
Step 2: Press and release
the Learn button on the
receiver. The Indicator Light
will light for 30 seconds
indicating that receiver is in
Learn Mode.
Assembly
Step 3: Within 30 seconds enter Master PIN Number
on Keypad.
Step 4: Press “1”.
Erase All Control Codes
Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)
Keypad will beep.
Keypad will continuously beep indicating no Master
PIN Number has been programmed. Proceed to Initial
Setup.
Press and hold the Learn button on the receiver until
the Indicator Light turns off indicating that the receiver
memory is clear (about 6 seconds).
1
For more information, visit www.devancocanada.com or call toll free at 855-931-3334
Operation
To use Keypad, enter any valid PIN Number.
Change Master PIN Number
Enter existing Master PIN Number on Keypad:
?
?
?
0
9
Temporary PIN Numbers
A temporary PIN Number can be used only once
within a 24 hour period.
NOTE: The WKP5LM3 can hold up to 5 Temporary
PIN Numbers while the WKP250LM3 can hold 15.
?
Enter Master PIN Number on Keypad:
?
“BEEP”
#
#
?
?
5
1
?
“BEEP”
Enter temporary PIN Number:
#
Enter new Master PIN Number:
“BEEP”
“BEEP”
Adding PIN Numbers
Keypad Brightness
The WKP5LM3 can support up to 5 PIN Numbers
while the WKP250LM3 can support 250.
When it is dark, the panel will light when it detects
movement (up to 5') or when a button is pressed.
Enter Master PIN Number on Keypad:
?
?
?
Enter Master PIN Number on Keypad:
?
?
9
“BEEP”
Enter new PIN Number:
?
?
0
8
?
Enter one of the following brightness levels:
1
OR
2
OR
3
“BEEP”
“BEEP”
Default setting is 2.
Erasing PIN Numbers
Enter Master PIN Number on Keypad:
?
?
?
?
7
“BEEP”
Enter PIN number you want to remove:
“BEEP” “BEEP”
A triple beep indicates a PIN Number has been
entered that does not exist. The Master PIN Number
cannot be deleted.
Battery
The AA batteries (not provided) in the Keypad will
typically last up to 3 years depending on use. (Lithium
batteries recommended for colder environments.)
Mount Keypad
It is recommended that Keypad be mounted to a
Gooseneck post or non-metallic surface. If it is
necessary to mount Keypad to a metal surface, use a
non-metallic spacer to move the Keypad away from
the metal surface.
Step 2
Step 1
Mount the Keypad onto the back panel with screws.
Tighten screws with Allen wrench.
Choose mounting location for Keypad. Remove the
back panel and attach it to a solid surface or post.
3
One Year Limited Warranty
One
Year
Limited
Warranty
The
Chamberlain
Group,
Inc. warrants to
the first retail purchaser of this product that it is free from defect in materials and/or workmanship for a period
FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:
of
1 year
from the Group,
date ofInc.
purchase.
The
Chamberlain
warrants to the first retail purchaser of this product that it is free from defect in materials and/or workmanship for a period
1-800-528-2806
of 1 year from the date of purchase.
www.liftmaster.com
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited,
except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:
FOR TECHNICAL SUPPORT
DIAL OUR TOLL FREE NUMBER:
1-800-528-2806
1-800-528-2806
www.liftmaster.com
www.liftmaster.com
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited,
except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
NOTICE:
comply
with
FCC
and or Industry
Canada
rules (IC),
adjustment
this receiver
and/or transmitter
are prohibited,
Tested toTo
Comply
with
FCC
Standards
FOR HOME
OR OFFICE
USE.
Operation or
is modifications
subject to the of
following
two conditions:
(1) this device
may not
except
for changing
the codeand
setting
or replacing
the accept
battery.any
THERE
ARE NOreceived,
OTHER USER
SERVICEABLE
cause harmful
interference,
(2) this
device must
interference
including
interferencePARTS.
that may cause undesired operation.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
HOW TO ORDER REPAIR PARTS
DEVANCO CANADA
19192 HAY ROAD, UNIT Q
SUMMERSTOWN, ON K0C 2E0
TOLL FREE: 855-931-3334
www.devancocanada.com
WHEN ORDERING REPAIR PARTS
PLEASE SUPPLY THE FOLLOWING INFORMATION:
114A3531D
114A3531D
114A3531D
3 PART NUMBER
3 DESCRIPTION
3 MODEL NUMBER
© 2011, The Chamberlain Group Inc.
All Rights Reserved
© 2011, The Chamberlain Group Inc.
All Rights
Reserved
© 2011, The
Chamberlain
Group Inc.
All Rights Reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising