A Complete System to Work Safer and Smarter

A Complete System to Work Safer and Smarter
SMARTCLAMP
™
*
Belt Clamps
A Complete System to
Work Safer and Smarter
As part of Flexco Safe™ belt conveyor
maintenance solutions, the SmartClamp™
system provides both safety and efficiency
when clamping belts for installation of Clipper®
and Alligator® mechanical belt fasteners.
Safer.
The SmartClamp was engineered to maximize strength and
performance. The wedge grip design places an evenly distributed
pressure load over the entire clamp interface. The set of four clamps
permits safe pulling of belts with up to 2,000 lbs. (900 kg) of take-up
load. Each individual clamp is rated up to a 1,000 lb. (450 kg) load.
Faster.
Unlike other clamp systems which require time-consuming
adjustments, the SmartClamp™ needs only a quick tap of a hammer
to prelock the wedges. Attach and tighten come-alongs and the final
lock is engaged. This fast setup saves precious and costly time during
a breakdown situation.
With SmartClamps you do not need to sacrifice efficiencies for
safety. These easy-to-install belt clamps make the choice obvious for
maximum belt conveyor uptime.
Smarter.
*Patent pending
www.flexco.com
www.flexco.com
Features and
Benefits
SMARTCLAMP
™
Belt Clamps
Large impact plate provides easy
striking surface.
Ordering Information
Return Spring Post holds wedges
up so belt can easily slide into
clamping position.
Ordering
Number
Item
Code
SMARTCLAMP
04073
Weight
Belt Thickness
lbs.
kgs.
in.
mm
45.0
21.0
up to 5/16
up to 8
Note: A complete set of SmartClamps includes
four clamps with two convenient carrying bags.
Other Flexco Safe™ Products:
a.
900 Series* Belt Cutter
b.
Designed to enhance operator safety with the fully enclosed cutting blade, this lightweight,
portable belt cutter delivers straight, accurate cuts, time after time. Available in five widths:
24", 36", 48", 60" and 72" (600, 900, 1200, 1500, and 1800 mm).
Ribbed lower wedge and grooved housing
provide additional holding strength (a).
Beveled edges of the housing permit easy
belt engagement. Elimination of sharp
corners and edges provide a smoother
transition from clamp to belt, reducing the
chance of belt damage (b).
*Patent pending
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 • USA
Tel: (630) 971-0150 • Fax: (630) 971-1180 • E-mail: info@flexco.com • Web: www.flexco.com
Australia: 61-2-8818-2000 • Chile: 56-2-8967870 • China: 86-21-33528388
England: 44-1274-600-942 • Germany: 49-7428-9406-0 • India: 91-44-4354-2091
Mexico: 52-55-5674-5326 • Singapore: 65-6281-7278 • South Africa: 27-11-608-4180 • USA: 1-630-971-0150
©2009 Flexible Steel Lacing Company. Clipper® and Alligator® are registered trademarks. 05-13. For Reorder: X1796_enUS
www.flexco.com
Authorized Distributor:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising