Types IA, M18, M30 High Temperature, Nickel-plated

Types IA, M18, M30 High Temperature, Nickel-plated
Proximity Sensors Inductive
High Temperature, Nickel-plated Brass Housing
Types IA, M18, M30
• Nickel-plated brass housing
• Sensing distance:
flush mounting:
5 or 10 mm
non-flush mounting: 8 or 15 mm
• Power supply: 10 to 30 VDC
• Output: Transistor PNP, make switching
• High temperature range: -40º to +100ºC
• Protection: Short-circuit
• LED-indication for output ON
• 2 m PUR cable or M12 plug
Product Description
Ordering Key IA 18 ASF 05 PO M1 HT-K
Inductive proximity sensor in
M18 and M30 nickel-plated
brass housings for high temperature applications.
Output configuration PNP,
NO (make switching). Connection with 2 m PUR cable
or M12 plug.
Ind. prox. switch
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection
High temperature range
Rated operating
distance (Sn)
Connection
type
Housing
dimensions
Ordering no.
Transistor PNP
Make switching
5 mm 1)
5 mm 1)
8 mm
8 mm
Cable
Plug M12
Cable
Plug M12
M18
M18
M18
M18
IA 18 ASF 05 PO HT-K
IA 18 ASF 05 PO M1 HT-K
IA 18 ASN 08 PO HT-K
IA 18 ASN 08 PO M1 HT-K
10 mm 1)
10 mm 1)
15 mm
15 mm
Cable
Plug M12
Cable
Plug M12
M30
M30
M30
M30
IA 30 ASF 10 PO HT-K
IA 30 ASF 10 PO M1 HT-K
IA 30 ASN 15 PO HT-K
IA 30 ASN 15 PO M1 HT-K
Type Selection
1)
For flush mounting in metal
Specifications
Rated operational volt. (UB)
Ripple
Rated operational current (Ie)
Continuous
No-load supply current (Io)
Voltage drop (Ud)
Protection
Frequency of operating
cycles (f)
Indication for output ON
10 to 30 VDC (ripple included)
≤ 10%
≤ 200 mA @ + 25°C (+75°F)
≤ 25 mA (ON)
< 2,4 V (@ Imax)
Short circuit
IA18ASF: 1 kHz
IA18ASN: 500 Hz
IA30ASF: 500 Hz
IA30ASN: 300 Hz
LED, yellow
Specifications are subject to change without notice (20.08.01)
Sensing distance
Effective operating dist. (Sr)
Usable operating dist. (Su)
Ambient temperature
Operating
Storage
Degree of protection
Housing material
CE-marking
Connection
IA18ASF: 5 mm
IA18ASN: 8 mm
IA30ASF: 10 mm
IA30ASN: 15 mm
0.9 x Sn ≤ Sr ≤ 1.1 x Sn
0.85 x Sr ≤ Su ≤ 1.15 x Sr
-40° to +100°C (-40° to +212°F)
-45° to +105°C (-49° to +221°F)
IP 67 (Nema 1, 3, 4, 6, 13)
Nickel-plated brass
Yes
Cable, 2 m, PUR, AWG 22 or
Plug M12, CONH1A-xxx serie
1
IA, M18, M30
Dimensions
M30 x 1,5
M30 x 1,5
M18 x 1
M18 x 1
12
8
40
40
32
LED
40
40
28
LED
LED
LED
IA 18 ASF 05 .. .. -K
IA 18 ASN 08 .. .. -K
IA 30 ASF 10 .. .. -K
IA 30 ASN 15 .. .. -K
Plug version:
60 mm axial length
Plug version:
60 mm axial length
Plug version:
60 mm axial length
Plug version:
60 mm axial length
Installation Hints
To avoid interference from inductive voltage/
current peaks, separate the prox. switch power cables from any other power cables, e.g.
motor, contactor or solenoid cables
Relief of cable strain
Protection of the sensing face
Switch mounted on mobile carrier
A proximity switch should not serve as
mechanical stop
Any repetitive flexing of the
cable should be avoided
Incorrect
Correct
The cable should not be pulled
Wiring Diagram
1 BN
+
4 BK
3 BU
PNP - Make switching
2
Specifications are subject to change without notice (20.08.01)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising