Please read this manual first. Dear Customer, We would like

Please read this manual first. Dear Customer, We would like
Please read this manual first.
Dear Customer,
We would like you to obtain the best performance from your product that has been manufactured in
modern facilities under strict quality control procedures.
Therefore, we advise you to read through this User Manual carefully before using your product and keep it
for future reference. If you hand over the product to someone else, deliver the User Manual as well.
The User Manual will help you use the product in a fast and safe way.
• Read the User Manual before installing and operating the product.
• You must strictly observe the safety instructions.
• Keep this User Manual within easy reach for future reference.
• Also read other documents supplied with the product.
Remember that this User Manual may also be applicable for several other models.
Differences between models are explicitly identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
Important information or useful hints about usage.
Warning for hazardous situations with regard to life and property.
Warning for electric shock.
Warning for risk of fire.
Warning for hot surfaces.
TABLE OF CONTENTS
1 General information
4
Overview ....................................................... 4
Technical specifications ..................................5
Accessories supplied with the unit ................... 6
Injector table ..................................................6
2 Safety instructions
7
Explanation of safety instructions .................... 7
General safety ................................................7
Safety for children ..........................................8
Safety when working with gas ......................... 8
Safety when working with electricity ................9
Intended use ..................................................9
Disposal ........................................................ 9
Package information.......................................9
Disposing of the old product ........................... 9
Future Transportation .....................................9
3 Installation
11
Before installation ........................................11
Installation and connection ........................... 12
Gas conversion ............................................15
4 Preparation
5 How to use the hob
19
General information about cooking ............... 19
Using the hobs ............................................ 19
6 How to operate the oven
21
General information on baking, roasting and
grilling .................................................. 21
How to use the electric oven ........................ 21
Operating modes ......................................... 22
Using the oven clock.................................... 22
How to use the program lock ....................... 23
Cooking times table ..................................... 24
How to operate the grill ................................ 24
Cooking times table for grilling ..................... 24
Using the clock as an alarm ......................... 25
7 Maintenance and care
26
General information ..................................... 26
Cleaning the hob ......................................... 26
Cleaning the control panel ........................... 26
Cleaning the oven........................................ 26
Removal of oven door .................................. 27
Replacing the oven lamp .............................. 27
17
Tips for saving energy ..................................17
Initial use ..................................................... 17
Time setting .................................................17
First cleaning of the appliance....................... 18
Initial heating ...............................................18
8 Troubleshooting
28
9 GUARANTEE and SERVICE
29
3/EN
1 General information
Overview
1
2
3
4
5
Burner plate
Control panel
Shelf positions
Front door
Lower part
6
7
8
9
Handle
Foot
Tray
Wire shelf
1
2
3
4
6
Normal burner Front left
Normal burner Rear left
Wok burner Middle
Rapid burner Rear right
Auxiliary burner Front right
6
7
8
9
Digital timer
Oven knob
Thermostat lamp
Thermostat knob
4/EN
Technical specifications
GENERAL
External dimensions (height / width / depth)
850 mm (min) - 920 mm max//900 mm/600 mm
Voltage / frequency
230 V ~ 50 Hz
Total power consumption
2500 W
Fuse
min. 13 A
2
Cable type / section
H05VV-FG 3 x 1,5 mm or equivalent
Cable length
max. 2 m
Category of gas product
II 2H3+
Gas type / pressure
NG G 20/20 mbar
Total gas consumption
11.5kW
§
LPG G 30/28-30 mbar
Converting the gas type / pressure
– optional
Propane 31/37 mbar
HOB
Burners
Front left
Normal burner
Power
2000 W
Rear left
Normal burner
Power
2000 W
Middle
Wok burner
Power
3600 W
Rear right
Rapid burner
Power
2900 W
Front right
Auxiliary burner
Power
1000 W
OVEN/GRILL
Main oven
Fan oven
#
B
Energy efficiency class
Inner lamp
15–25 W
Grill power consumption
2500 W
#
Basics: Information on the energy label of electrical ovens is given in accordance with the EN 50304
standard. Those values are determined under standard load with bottom-top heater or fan assisted heating
(if any) functions.
Technical specifications may be changed
without prior notice to improve the quality of
the product.
Figures in this manual are schematic and
may not exactly match your product.
Values stated on the product labels or in the
documentation accompanying it are
obtained in laboratory conditions in
accordance with relevant standards.
Depending on operational and
environmental conditions of the product,
these values may vary.
5/EN
Accessories supplied with the unit
Accessories supplied can vary depending on
the product model. All the accessories
described in the user manual may not exist
on your product.
Baking tray
Can be used for pastries, frozen foods and big
roasts.
Proper positioning of the wire shelf and tray
on sliding shelves
Trays and wire shelves used with the sliding shelf
(model dependant) must be positioned correctly
with the inner edges of the shelf placed over the
pins on the sliding shelf. This holds the shelf
firmly in place".
Injector table
Position hob zone
Gas type / Gas
pressure
G 20/20 mbar
G 30/28-30 mbar
G 31/ 37 mbar
6/EN
2000 W
Front left
2000 W
Rear left
3600 W
Middle
2900 W
Rear right
1000 W
Front right
103
72
72
103
72
72
147
96
96
115
87
87
72
50
50
2 Safety instructions
Explanation of safety instructions
The following types of safety instructions and
information are used in this manual. They can be
distinguished by the symbol and the initial signal
word.
•
•
DANGER
High risk of personal injury.
Non-observance may or will cause serious
injuries or death.
CAUTION
Risk of personal injury.
•
•
Non-observance may or will cause minor or
medium injuries.
Risk of material damage.
Non-observance may or will cause damage
on the appliance or other objects.
Tip for the user.
Useful information on how to use the
appliance. No injury risk information.
General safety
•
•
•
This product is not intended to be used by
persons with physical, sensory or mental
disorders or unlearned or inexperienced
people (including children) unless they are
attended by a person who will be
responsible for their safety or who will
instruct them accordingly for use of the
product.
Children must be supervised to prevent
them from tampering with the product.
Connect the product to an earthed
outlet/line protected by a fuse of suitable
capacity as stated in the "Technical
specifications" table. Have the earthing
installation made by a qualified electrician
while using the product with or without a
transformer. Our company shall not be
liable for any problems arising due to the
product not being earthed in accordance
with the local regulations.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
•
•
•
•
•
•
•
•
•
•
agent or similary qualified persons in order
to avoid a hazard.
Do not operate the product if it is defective
or has any visible damage.
Do not carry out any repairs or modifications
on the product. However, you may remedy
some troubles that do not require any
repairs or modifications. See
Troubleshooting, page 28.
Never wash down the product with water!
There is the risk of electric shock!
Never use the product when your judgment
or coordination is impaired by the use of
alcohol and/or drugs.
Product must be disconnected from the
mains during installation, maintenance,
cleaning and repair procedures.
Be careful when using alcoholic drinks in
your dishes. Alcohol evaporates at high
temperatures and may cause fire since it
can ignite when it comes into contact with
hot surfaces.
Do not heat closed tins and glass jars in the
oven. The pressure that would build-up in
the tin/jar may cause it to burst.
Do not place any flammable materials close
to the product as the sides may become hot
during use.
Do not place baking trays, dishes or
aluminium foil directly onto the bottom of
the oven. The heat accumulation might
damage the bottom of the oven.
Do not place aluminium foil on the base of
the tray.
Keep all ventilation slots clear of
obstructions.
Product may be hot when it is in use. Never
touch the hot burners, inner sections of the
oven, heaters and etc.
Always use heat resistant oven gloves when
putting in or removing dishes into/from the
hot oven.
Do not use the product with front door glass
removed or cracked.
7/EN
•
Rear surface of the oven gets hot when it is
in use. Make sure that the gas/electrical
connection does not contact the rear
surface; otherwise, connections can get
damaged.
• Do not trap the mains cable between the
oven door and frame and do not route it
over hot surfaces. Otherwise, cable
insulation may melt and cause fire as a
result of short circuit.
• Make sure that the product function knobs
are switched off after every use.
Safety for children
• Packaging materials are dangerous to
children. Keep packaging materials in a safe
place out of reach of children.
• Electrical and/or gas products are
dangerous to children. Keep children away
from the product when it is operating and
do not allow them to play with the product.
• Accessible parts of the appliance will
become hot whilst the appliance is in use.
Children should be kept away until the
product has cooled down.
• "CAUTION: Accessible parts may be hot
when the grill is in use. Young children
should be kept away."
• Do not place any items above the appliance
that children may reach for.
• When the door is open, do not load any
heavy object on it and do not allow children
to sit on it. It may overturn or door hinges
may get damaged.
• The packaging materials will be dangerous
for children. Keep the packaging materials
away from children. Please dispose of all
parts of the packaging according to
environmental standards.
SAVE THESE INSTRUCTIONS
8/EN
Safety when working with gas
• Any works on gas equipment and systems
may only be carried out by authorised
qualified persons who are Gas Safe
registered.
• "Prior to the installation, ensure that the
local distribution conditions (nature of the
gas and gas pressure) and the adjustment
of the appliance are compatible."
• "This appliance is not connected to a
combustion products or evacuation device.
It shall be installed and connected in
accordance with current installation
regulations. Particular attention shall be
given to the relevant requirements regarding
ventilation;" See Before installation, page 11
• "CAUTION: The use of gas cooking
appliance results in the production of heat
and moisture in the room in which it is
installed. Ensure that the kitchen is well
ventilated: keep natural ventilation holes
open or install a mechanical ventilation
device (mechanical extractor hood).
Prolonged intensive use of the appliance
may call for additional ventilation, for
example increasing the level of the
mechanical ventilation where present."
• Gas appliances and systems must be
regularly checked for proper functioning.
Regulator, hose and its clamp must be
checked regularly and replaced within the
periods recommended by its manufacturer
or when necessary.
• Clean the gas burners regularly. The flames
should be blue and burn evenly.
• Good combustion is required in gas
appliances. In case of incomplete
combustion, carbon monoxide (CO) might
develop. Carbon monoxide is a colourless,
odourless and very toxic gas, which has a
lethal effect even in very small doses.
• Request information about gas emergency
telephone numbers and safety measures in
case of gas smell from you local gas
provider.
What to do when you smell gas
DANGER
Risk of explosion and poisoning!
Put out all naked flames and do not smoke,
strike matches or do anything that could
cause ignition.
Do not operate any electric switches (e.g.
light switch, TV, computer, cooker or door
bell).
Do not use a telephone or mobile phone.
1. Turn off all valves on gas appliances and gas
meter at the main control valve, unless it's in
a confined space or cellar.
2. Open doors and windows.
3. Check all tubes and connections for tightness.
If you still smell gas leave the property.
4. Warn the neighbours.
5. Call the fire-brigade. Use a telephone outside
the house.
Call the Gas Emergency Services immediately on
0800 111 999
5.1 If you have door or gates that are
secured by an electric lock, or entry
phone, please open these manually.
6. Do not re-enter the property until you are told
it is safe to do so.
Safety when working with electricity
Defective electric equipment is one of the major
causes of house fires.
• Any work on electrical equipment and
systems should only be carried out by
authorized and qualified persons.
• In case of any damage, switch off the
product and disconnect it from the mains.
To do this, turn off the fuse at home.
• Make sure that fuse rating is compatible
with the product.
Intended use
This product is designed for domestic use.
Commercial use will void the guarantee.
"CAUTION: This appliance is for cooking
purposes only. It must not be used for other
purposes, for example room heating."
This product should not be used for warming the
plates under the grill, drying towels, dish cloths
etc. by hanging them on the oven door handles.
This product should also not be used for room
heating purposes.
The manufacturer shall not be liable for any
damage caused by improper use or handling
errors.
The oven can be used for defrosting, baking,
roasting and grilling food.
Disposal
Package information
Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations.
Do not dispose of the packaging materials
together with the domestic or other wastes. Take
them to the packaging material collection points
designated by the local authorities.
Disposing of the old product
Dispose of the old product in an environmentally
friendly manner.
This equipment bears the selective sorting
symbol for waste electrical and electronic
equipment (WEEE). This means that this
equipment must be handled pursuant to
European Directive 2002/96/EC in order to be
recycled or dismantled to minimize its impact on
the environment. For further information, please
contact local or regional authorities.
Refer to your local dealer or solid waste
collection centre in your area to learn how to
dispose of your product.
Before disposing of the product, cut off the
power cable plug and make the door lock (if any)
unusable to avoid dangerous conditions to
children.
Future Transportation
• Keep the product's original carton and
transport the product in it. Follow the
instructions on the carton. If you do not
have the original carton, pack the product in
bubble wrap or thick cardboard and tape it
securely.
9/EN
•
•
To prevent the wire grill and tray inside the
oven from damaging the oven door, place a
strip of cardboard onto the inside of the
oven door that lines up with the position of
the trays. Tape the oven door to the side
walls.
Secure the caps and pan supports with
adhesive tape.
10/EN
•
Do not use the door or handle to lift or move
the product.
Do not place other items on the top of the
appliance. The appliance must be
transported upright.
Check the general appearance of your
product for any damages that might have
occurred during transportation.
3 Installation
Before installation
Please note the product is packed without the
feet fitted, therefore please ensure the feet are
fitted as per the instructions; see Installation and
connection , page 12 before the appliance is
placed in its final position.
To ensure that critical air gaps are maintained
under the appliance, we recommend that this
appliance is mounted on a solid base and that
the feet do not sink into any carpet or soft
flooring.
The kitchen floor must be able to carry the
weight of the appliance plus the additional weight
of cookware and bakeware and food.
•
•
•
•
the drawing. Open the oven door sufficiently
to allow a comfortable and safe grip on the
underside of the oven roof avoid causing
any damage to the grill element or any
internal parts of the oven. Do not move by
pulling on the door handle or knobs. Move
the appliance a bit at a time until placed in
the position required.
It can be used with cabinets on either side
but in order to have a minimum distance of
400mm above hotplate level allow a side
clearance of 65mm between the appliance
and any wall, partition or tall cupboard.
It can also be used in a free standing
position. Allow a minimum distance of 650
mm above the hob surface.
(*) If a cooker hood is to be installed above
the cooker, refer to cooker hood
manufacturer' instructions regarding
installation height (min 650 mm).
Movement of your appliance is most easily
achieved by lifting the front as indicated in
11/EN
•
•
The appliance corresponds to device class 1,
i.e. it may be placed with the rear and one
side to kitchen walls, kitchen furniture or
equipment of any size. The kitchen furniture
or equipment on the other side may only be
of the same size or smaller.
Any kitchen furniture next to the appliance
must be heat-resistant (100 °C min.).
The appliance must be secured against
overbalancing by using the supplied two
safety chains on your oven. Fasten hook (1)
to the kitchen wall (5) and connect safety
chain (2) to the hook.
Room ventilation
All rooms require an openable window, or
equvalent, and some rooms will require a
permanent vent as well.
The air for combustion is taken from the room air
and the exhaust gases are emitted directly into
the room.
Good room ventilation is essential for safe
operation of your appliance. If there is no window
or door available for room ventilation, an extra
ventilation must be installed.
The appliance may be located in a kitchen,
kitchen/diner or a bed-sitting room, but not in a
room containing a bath or shower. The appliance
must not be installed in a bed-sitting room of
3
less than 20m .
Do not install this appliance in a room below
ground level unless it is open to ground level on
at least one side.
Room size
3
smaller than 5 m
3
3
5 m to 10 m
3
greater than 10 m 'den
In the cellar or
basement
Ventilation opening
2
min. 100 cm
2
min. 50 cm
not required
2
min. 65 cm
Installation and connection
Product can only be installed and connected in
accordance with the statutory installation rules.
Do not install the appliance next to
refrigerators or freezers. The heat emitted
by the appliance will lead to an increased
energy consumption of cooling appliances.
•
•
1
2
3
4
5
Hook (is not supplied)
Safety chain (supplied and mounted to oven)
Rear of cooker
Firmly fix chain to cooker rear
Kitchen wall
12/EN
Carry the product with at least two persons.
Product must be placed directly on the floor.
It must not be placed onto a base or a
pedestal.
Material damage!
The door and/or handle must not be used
for lifting or moving the appliance.
Electrical connection
Connect the product to a grounded outlet/line
protected by a fuse of suitable capacity as stated
in the "Technical specifications" table. Have the
grounding installation made by a qualified
electrician while using the product with or
without a transformer. Our company shall not be
liable for any damages that will arise due to
using the product without a grounding installation
in accordance with the local regulations.
DANGER
Risk of electric shock, short circuit or
fire by unprofessional installation!
The appliance may be connected to the
mains supply only by an authorized qualified
person and the appliance is only guaranteed
after correct installation.
DANGER
Risk of electric shock, short circuit or
fire by damage of the mains lead!
The mains lead must not be clamped, bent
or trapped or come into contact with hot
parts of the appliance.
If the mains lead is damaged, it must be
replaced by a qualified electrician.
The mains supply data must correspond to the
data specified on the type label of the product.
The rating plate is either seen when the door or
the lower cover is opened or it is located at the
rear wall of the unit depending on the unit type.
Power cable of your product must comply with
the values in "Technical specifications" table.
DANGER
Risk of electric shock!
Before starting any work on the electrical
installation, please disconnect the appliance
from the mains supply.
Connecting the power cable
1. If a power cable is not supplied together
with your product,a power cable that you
would select from the table in accordance
with the electrical installation at your home
must be connected to your product by
following the instructions in cable diagram.
This product must only be connected by a
qualified electrician such as a technician from
the local electricity company or NICEIC registered
contractor to a suitable double-pole control unit
with a minimum contact clearance of 3 mm in all
poles. This control unit must be installed in
accordance with the IEE directives. Failure to
obey this instruction may cause operational
problems and invalidate the product warranty.
This product must only be installed by a qualified
electrician eg local electricity company or NICEIC
registered contractor to a suitable double-pole
control unit with a minimum contact clearance of
3mm in all poles and with a minimum rating
please consider technical data table, Technical
specifications, page 5 which should be fitted
adjacent to (but not above) the cooker in
accordance with IEE regulations. Failure to
observe this instruction may result in operational
problems and invalidation of the product warranty.
Additional protection by a residual
current circuit breaker is
recommended.
2. Fitting a different plug
The moulded plug on this appliance incorporates
a 13A fuse. Should the fuse need to be replaced
an ASTA approved BS1362 fuse of the same
rating must be used. Do not forget to refit the
fuse cover. In the event of losing the fuse cover,
the plug must not be used until a replacement
fuse cover has been fitted. Colour of the
replacement fuse cover must be the same colour
as that visible on the pin face of the plug. Fuse
covers are available from any good electrical
store.
As the colours of the wires in the mains lead
of this appliance may not correspond with
the coloured markings identifying the
terminals on your plug, proceed as follows:
• Brown cable = L (Live)
• Blue cable = N (Neutral)
• Green/yellow cable must be connected to
ground (E)
line.
With the alternative plugs a 13 A fuse must
be fitted either in the plug or adaptor or in
the main fuse box. If in doubt contact a
qualified electrician.
3. Open the terminal block cover with a
screwdriver.
4. Insert the power cable through the cable
clamp below the terminal and secure it to the
13/EN
main body with the integrated screw on cable
clamping component.
5. Connect the cables according to the supplied
diagram.
Ireland Only:
• This appliance must be installed in
accordance with the Domestic installation of
gas (Irish Standard) in force Failure to install
the appliance correctly could invalidate the
warranty and lead to liability claims and
prosecution.
•
Your appliance is adjusted for Natural gas.
6. After completing the wire connections, close
the terminal block cover.
7. Route the power cable so that it will not
contact the product and get squeezed
between the product and the wall.
Power cable must not be longer than 2
m because of safety reasons.
The cooker is designed for UK and Ireland
installation using a flexible connection with
tubing in accordance with the regulations in
force. Length of 900 mm is recommend
(Ireland 600 mm).
Make sure that the natural gas valve is
readily accessible.
If a flexible hose is used it must not come into
contact with the top 150mm/6 inches (hot region)
of the rear of the appliance. Do not pass the
hose through the (**) hot region behind the oven.
Gas connection
DANGER
Risk of explosion or poisoning by
unprofessional installation.
The appliance may be connected to the gas
distribution system only by an authorized
qualified person who is Gas Safe registered.
DANGER
Risk of explosion!
Before starting any work on the gas
installation, please shut off the gas supply.
•
Gas adjustment conditions and values are
stated on labels (or ion type label).
• In the UK, Gas Safe registered installers
(Including the Regions of British Gas)
undertake to work to safe and satisfactory
standards.
Regulations
The cooker must be installed in accordance with
the Gas Safety (Installation and Use) Regulations
and the relevant Building Regulations in force.
14/EN
(**)
Hot region
If you need to use your appliance later with
a different type of gas, you must consult an
authorised service centre for the related
conversion procedure.
Seal all connections with gas sealant.
1. Shut gas supply.
2. Connect safety (gas) hose 5 to the inlet valve
of the oven.
3. Connect gas hose with elbow joint 6 .
1
2
3
4
5
6
7
Gasket
Adapter (optional) with 1/2" outlet
Gasket
Gas (safety) hose
Valve with 90° outlet
Connection piece
Gas supply pipe
DANGER
Risk of explosion by damage of the
safety tube!
The safety tube must not be clamped, bent
or trapped or come into contact with hot
parts of the appliance.
•
•
•
•
Push the product towards the kitchen wall.
Hook safety chain.
Adjusting the feet of oven
Vibrations during use may cause cooking
vessels to move. This dangerous situation
can be avoided if the product is level and
balanced.
For your own safety please ensure the
product is level by adjusting the four feet at
the bottom by turning left or right and align
level with the work top.
Adjusting the feet of oven
4 feet are supplied together with your oven.
Each foot must be installed into respective
slots located at 4 corners under the oven.
Screw the thread of the foot by turning in
clockwise.
For your safety, make sure that they are
level when screwing all 4 feet. Unbalance of
the legs has negative influence on cooking.
1
2
Foot
Foot slot
Final check
1. Reconnect the product to the mains.
2. Check electrical functions.
3. Open gas supply.
4. Check gas installations for secure fitting and
tightness.
5. Ignite burners and check appearance of the
flame.
The flames should be blue and burn
smoothly. If the flames appear yellowish,
check secure position of the burner cap or
clean the burner. Switch off gas and let
burner cool before touching it.
Gas conversion
DANGER
Risk of explosion!
Before starting any work on the gas
installation, please shut off the gas supply.
In order to change your appliance's gas type,
change all injectors and make flame adjustment
for all valves at reduced flow rate position.
• Gas conversion must only be carried out
by a Gas Safe registered installer or
service agent.
Exchange injector for the burners
1. Take off burner cap and burner body.
2. Unscrew injectors.
3. Fit new injectors.
15/EN
4. Check all connections for secure fitting and
tightness.
New injectors have their position
marked on their packing or injector
table on Injector table, page 6 can be
referred to.
1
2
3
4
4. If the flame is higher than the desired
position, turn the screw clockwise. If it is
smaller turn anticlockwise.
5. For the last control, bring the burner both to
high-flame and reduced positions and check
whether the flame is on or off.
Depending on the type of gas tap used in your
appliance the adjustment screw position may
vary.
Flame failure device (model dependant)
Sparking plug
Injector
Burner
1
Flow rate adjustment screw
1
Flow rate adjustment screw
Unless there is an abnormal condition, do
not attempt to remove the gas burner taps.
You must call an Authorised service agent if
it is necessary to change the taps.
Reduced gas flow rate setting for hob
taps
1. Ignite the burner that is to be adjusted and
turn the knob to the reduced position.
2. Remove the knob from the gas tap.
3. Use an appropriately sized screwdriver to
adjust the flow rate adjustment screw.
For LPG (Butane - Propane) turn the screw
clockwise.
For the natural gas, you should turn the screw
counter-clockwiseonce.
» The normal length of a straight flame in the
reduced position should be 6-7 mm.
16/EN
If the gas type of the unit is changed, then
the rating plate that shows the gas type of
the unit must also be changed.
4 Preparation
Tips for saving energy
The following information will help you to use
your appliance in an ecological way, and to save
energy:
• Use dark coloured or enamel coated
cookware in the oven since the heat
transmission will be better.
• While cooking your dishes, perform a
preheating operation if it is advised in the
user manual or cooking instructions.
• Do not open the door of the oven frequently
during cooking.
• Try to cook more than one dish in the oven
at the same time whenever possible. You
can cook by placing two cooking vessels
onto the wire shelf.
• Cook more than one dish one after another.
The oven will already be hot.
• You can save energy by switching off your
oven a few minutes before the end of the
cooking time. Do not open the oven door.
• Defrost frozen dishes before cooking them.
• Use pots/pans with cover for cooking. If
there is no cover, energy consumption may
increase 4 times.
• Select the burner which is suitable for the
bottom size of the pot to be used. Always
select the correct pot size for your dishes.
Larger pots require more energy.
Initial use
Time setting
While making any adjustment, related
symbols on the clock will flash.
Press „–“ or „+“ (5/6) keys to set the time after
the oven in energized for the first time.
1
2
3
4
5
6
7
8
9
10
11
Program key
Cooking time
End of cooking time
Alarm
Minus key
Plus key
Screen brightness setting
Alarm volume
Current time
Keylock
Adjustment key
After setting the time, you can start and end the
cooking by selecting the desired position with
temperature button and function button.
If the current time is not set, time setting
will start increasing/moving up from 12:00.
Clock symbol '9' will be displayed to
indicate that the current time has not been
set. This symbol will disappear once the
time is set.
Current time settings are cancelled in case
of power failure. It needs to be readjusted.
To change the time of the day you have
previously set:
1. Press (11) key to activate current time
symbol '9'.
2. Press „–“ or „+“ (5/6) keys to set the
current time.
17/EN
Changing screen brightness adjustment
1. Press (11) key to activate screen brightness
symbol '7' for screen brightness adjustment.
2. Press '–' or '+' (5/6) keys to set the desired
brightness.
» Selected brightness level will appear as d-01,
d-02 or d-03 on the display.
First cleaning of the appliance
The surface may get damaged by some
detergents or cleaning materials.
Do not use aggressive detergents, cleaning
powder/cream or any sharp objects.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance with a
damp cloth or sponge and dry with a cloth.
Initial heating
Heat up the product for about 30 minutes and
then switch it off. Thus, any production residues
or layers will be burnt off and removed.
WARNING
Hot surfaces may cause burns!
Do not touch the hot surfaces of the
appliance. Use oven gloves. Keep children
away from the appliance.
18/EN
Electric oven
1. Take all baking trays and the wire grill out of
the oven.
2. Close the oven door.
3. Select the highest grill power; See How to
use the electric oven, page 21.
4. Operate the oven for about 30 minutes.
5. Turn off your oven; See How to use the
electric oven, page 21
Grill oven
1. Take all baking trays and the wire grill out of
the oven.
2. Close the oven door.
3. Select the highest grill power; see How to
operate the grill, page 24.
4. Operate the grill about 30 minutes.
5. Turn off your grill; see How to operate the
grill, page 24
Smell and smoke may emit during first
heating. Ensure that the room is well
ventilated.
5 How to use the hob
General information about cooking
DANGER
Risk of fire by overheated oil!
When you heat oil, do not leave it
unattended.
Never try to extinguish the fire with
water! When oil has caught fire,
immediately cover the pot or pan with a lid.
Switch off the hob if safe to do so and
phone the fire service.
•
•
•
•
•
•
•
•
Before frying foods, always dry them well
and gently place into the hot oil. Ensure
complete thawing of frozen foods before
frying.
Do not cover the vessel you use when
heating oil.
Place the pans and saucepans in a manner
so that their handles are not over the hob to
prevent heating of the handles. Do not place
unbalanced and easily tilting vessels on the
hob.
Do not place empty vessels and saucepans
on cooking zones that are switched on.
They might get damaged.
Operating a cooking zone without a vessel
or saucepan on it will cause damage to the
product. Turn off the cooking zones after
the cooking is complete.
As the surface of the product can be hot, do
not put plastic and aluminum vessels on it.
Such vessels should not be used to keep
foods either.
Use flat bottomed saucepans or vessels only.
Put appropriate amount of food in
saucepans and pans. Thus, you will not
have to make any unnecessary cleaning by
preventing the dishes from overflowing.
Do not put covers of saucepans or pans on
cooking zones.
Place the saucepans in a manner so that
they are centered on the cooking zone.
When you want to move the saucepan onto
another cooking zone, lift and place it onto
the cooking zone you want instead of sliding
it.
Gas cooking
• Size of the vessel and the flame must match
each other. Adjust the gas flames so that
they will not extend the bottom of the vessel
and center the vessel on saucepan carrier.
Using the hobs
List of advised diameter of pots to be used on
related burners.
1
2
3
4
5
Normal burner 18–20 cm
Normal burner 18–20 cm
Wok burner 22-24 cm
Auxiliary burner 16-18 cm
Rapid burner 20-22 cm
Large flame symbol indicates the highest cooking
power and small flame symbol indicates the
lowest cooking symbol. In turned off position
(top), gas is not supplied to the burners.
Igniting the gas burners
1. Keep burner knob pressed.
2. Turn it counter clockwise to large flame
symbol.
» Gas is ignited with the spark created.
3. Adjust it to the desired cooking power.
Turning off the gas burners
Turn the keep warm zone knob to off (upper)
position.
19/EN
Gas shut off safety system (in models
with thermic component)
As a counter measure
against blow out due to fluid
overflows at burners, safety
mechanism trips and shuts
off the gas.
1. Gas shut off
safety
•
•
•
Push the knob inwards and turn it counter
clockwise to ignite.
After the gas ignites, keep the knob pressed
for 3-5 seconds more to engage the safety
system.
If the gas does not ignite after you press
and release the knob, repeat the same
procedure by keeping the knob pressed for
15 seconds.
20/EN
DANGER
Risk of deflagration incase of unburned
gas!
Do not press the knob for longer than 15
seconds if there was no ignition.
Wait for one minute and then repeat the
ignition process.
Wok burner
Wok burners help you to cook faster. Wok, which
is particularly used in Asian kitchen is a kind of
deep and flat fry-pan made of sheet metal, which
is used to cook minced vegetable and meat at
strong flame in a short time.
Since meals are cooked at strong flame and in a
very short time in such fry-pans that conduct the
heat rapidly and evenly, the nutrition value of the
food is preserved and vegetables remain crispy.
You can use wok burner for regular saucepans
as well.
6 How to operate the oven
General information on baking,
roasting and grilling
DANGER
Risk of scalding by hot steam!
•
•
Take care when opening the oven door as
steam may escape.
Tips for baking
• Use non-stick coated appropriate metal
plates or aluminum containers or heatresistant silicone moulds.
• Make best use of the space on the rack.
• It is recommended to place the baking
mould in the middle of the rack.
• Select the correct shelf position before
turning the oven or grill on - don’t move
oven shelves when hot.
• Keep the oven door closed.
Tips for roasting
• Seasoning with lemon juice and black
pepper will improve the cooking
performance when cooking a whole chicken,
turkey or a large piece of meat.
• Meat with bones takes about 15 to 30
minutes longer before it is cooked than a
roast of the same size without bones.
• You should calculate about 4 to 5 minutes
cooking time per centimeter height of the
meat.
• Let meat rest in the oven for about
10 minutes after the cooking time. The juice
is better distributed all over the roast and
does not run out when the meat is cut.
• Fish in a fire-resistant dish should be placed
on the rack at the medium or lower level.
Tips for grilling
Grilling is ideal for cooking meat, fish and poultry
and will achieve a nice brown surface without it
drying out to much. Flat pieces, meat skewers
and sausages are particularly suited for grilling
as are vegetables with a high water content such
as tomatoes and onions.
• Distribute the pieces to be grilled on the
wire shelf.
If the grilling is on the wire shelf, locate a
dripping pan under it in order to collect the
fat.
Add some water in the dripping pan for easy
cleaning.
Fire danger due to food which is
unsuitable for grilling!
Only use food for grilling which is suitable
for intensive grilling heat.
Do not place the food too far in the back of
the grill. This is the hottest area and fat food
may catch fire.
How to use the electric oven
Select temperature and operating mode
1
2
3
Oven knob
Thermostat lamp
Thermostat knob
The operating modes of the electric oven are
selected with the function knob. The temperature
is adjusted with the thermostat knob.
All oven functions are turned off by turning the
relevant knob to off (upper) position.
1. Set thermostat knob to the desired
temperature.
2. Set function knob to the required operating
mode.
» The oven heats up to the adjusted temperature
and maintains it. During heating, temperature
lamp stays on.
Switch off electric oven
Turn function knob and thermostat knob to off
position (top).
21/EN
Using the oven clock
Shelf positions
Operating modes
The order of operating modes shown here might
deviate from the arrangement on your appliance.
Hot air
The heating ring with fan (in the rear
wall) is in operation. The hot air is
distributed evenly and quickly all over
the oven by the fan. In most cases,
preheating is not required. Suitable
when several levels are used for the
preparation of food. Suitable for
cooking with multi trays.
Surface grill
The large grill (under the oven roof) is
in operation. Suitable for grilling
larger quantities.
•
•
•
Put big or medium-sized
portions in correct shelf
position under the grill
heater for grilling.
Set the temperature to
maximum level.
Turn the food after half of
the grilling time.
1
2
3
4
5
6
7
8
9
10
11
Program key
Cooking time
End of cooking time
Alarm
Minus key
Plus key
Screen brightness setting
Alarm volume
Current time
Keylock
Adjustment key
The maximum time to be set for the end of
the cooking process is 5 hours and 59
minutes. In case of power cut, program will
be canceled. Reprogram is needed.
While making any adjustments, related
symbols will flash on the display. You must
wait for a short time for the settings to take
effect.
If no cooking setting is made, time of the
day cannot be set.
Cooking time will be displayed once the
cooking starts.
22/EN
Cooking by specifying the cooking time:
You can set the oven so that it will stop at the
end of the specified time by setting the cooking
time on the clock.
1. To adjust the cooking time, Press Program
key (1) and activate the Cooking Time symbol
(2).
2. Press '–' / '+' (5/6) keys to set the cooking
time.
» Once the Cooking Time is set, Cooking symbol
will be displayed continuously.
If you want to set the end of cooking time
to a later time:
After setting the cooking time on the clock, you
can set the end of cooking time to a later time.
1. To adjust the cooking time, press Program
key (1) and activate the Cooking Time symbol
(2).
2. Adjust the cooking time with Minus (5) and
Plus (6) keys.
» Cooking Time symbol remains lit (displayed
continuously) after setting the cooking time.
3. To set the End of Cooking Time, Press
Program key (1) and activate the Cooking
Time symbol (3).
4. Press - (5) and + (6) keys to set the end of
cooking time.
» Once the End of Cooking Time is set, End of
Cooking symbol and Cooking symbol will be
displayed continuously. The End of Cooking Time
symbol (3) will disappear as soon as the cooking
starts.
5. Put your dish into the oven.
6. Select operation mode and temperature.
» Oven timer automatically calculates the startup
time for cooking by using the end of cooking time
and the cooking period you have set. Selected
operation mode is activated when the startup
time of cooking has come and the oven is heated
up to the set temperature. It maintains this
temperature until the end of cooking time.
7. After the cooking process is completed,
"End" appears on the displayed and the
alarm will sound.
8. Alarm signal will sound for 2 minutes. To
stop the alarm signal, just press any key.
Alarm will be silenced and current time will
be displayed.
If you mute the alarm by pressing any
key, the oven will restart operating.
If you press any button at the end of the
alarm period, the oven will restart
operating.
9. Turn off the oven with the Temperature knob
and Function knob.
How to use the program lock
Activate the program lock
You can prevent using of clock buttons by
activating the program feature.
1
2
3
4
5
6
7
8
9
10
11
Program key
Cooking time
End of cooking time
Alarm
Minus key
Plus key
Screen brightness setting
Alarm volume
Current time
Keylock
Adjustment key
When the keylock function is activated,
clock buttons except for "11" key cannot
be used.
1. Press '11' key to activate keylock symbol
"10".
» "OFF" will be displayed.
2. Press 6 key to activate the keylock.
» After the keylock has been adjusted, "ON" will
be displayed and the keylock symbol will stay on.
23/EN
Deactivate the program lock
1. Press '11' key to activate keylock symbol
"10".
» "ON" will be displayed.
2. Press '5' key to deactivate the keylock.
» "OFF" will be displayed after the keylock is
turned off.
Cooking times table
The values indicated in the table below are
data indicative. They may vary according to
the type of food as well as your preferences
of cooking.
Baking and roasting
Level 1 is the bottom level in the oven.
Dish
Rack position
Steak
2...3
Baked lamb
2...3
Roasted port
2...3
Poultry - up to 4.0 kg (8lbs) kg
2...3
(8lbs)
Poultry - up to 5.5 kg (12lbs) kg
2...3
(12lbs)
Casseroles
2...3
Small cakes
4
Jelly sandwich
1
§
#
according to amount / according to size
Temperature
200...210 °C
200...210 °C
190...210 °C
190...210 °C
Cooking time (approx.)
90...110 min.
90...110 min.
80...100 min.
80...100 min.
200...210 °C
90...110 min.
180...190 °C
160...180 °C
160...180 °C
90...120 min.
15...25 min.
20...25 min.
§
How to operate the grill
Close oven door during grilling.
Hot surfaces may cause burns!
The door has a door switch. As a safety feature,
this switch prevents the grill from working when
the door is opened.
Switch on grill
1. Set the function knob onto the grill symbol.
Grilling with electric grill
Food
Fish
Sliced chicken
Lamb chops
Roast beef
Veal chops
#
depending on thickness
24/EN
2. Set grill temperature.
3. Preheat for approximately 5 minutes, if it is
necessary.
» The thermostat lamp is switched on.
Switch off grill
1. Turn grill control knob to off position (top).
Cooking times table for grilling
Insertion level
3...4
3...4
3...4
3...4
3...4
Grilling time (approx.)
#
20...25 min.
15...20 min.
12...15 min.
#
15...25 min.
#
15...25 min.
Using the clock as an alarm
The alarm clock has no influence on the
functions of the oven. It is only used as a warning.
For example, this is useful when you want to turn
food in the oven at a certain point of time. Alarm
clock will give a signal once the time you set is
over.
1
2
3
4
5
6
7
8
9
10
11
Program key
Cooking time
End of cooking time
Alarm
Minus key
Plus key
Screen brightness setting
Alarm volume
Current time
Keylock
Adjustment key
Setting the alarm clock
1. Press Program key (1) to activate the alarm
time symbol (4).
The maximum alarm time can be 23
hours and 59 minutes.
2. Adjust the alarm time using „+“ /„–“ (5/6)
keys.
» Alarm symbol will remain lit and the alarm time
will appear on the display once the alarm time is
set.
3. At the end of the alarm time, Alarm Time
symbol (4) will start flashing and the alarm
signal is heard.
Turning off the alarm
1. To stop the alarm, just press any key.
» Alarm will be silenced and current time will be
displayed.
If you want to cancel the alarm:
1. To reset the alarm time, press Program key
(1) to activate the alarm time symbol (4).
2. Press and hold the '–' (5) key until "00:00"
is displayed.
Alarm time will be displayed. If the alarm
time and cooking time are set concurrently,
shortest time will be displayed.
Changing alarm tone
1. Press Setting key (11) to activate the Alarm
Tone symbol (8).
2. Adjust the desired tone using „+“ /„–“ (5/6)
keys.
» Selected alarm tone will appear as "b-01",
"b-02" or "b-03" on the display.
25/EN
7 Maintenance and care
General information
Cleaning the hob
Service life of the product will extend and the
possibility of problems will decrease if the
product is cleaned at regular intervals.
Gas hobs
1. Remove and clean the saucepan carriers and
burner caps.
2. Clean the hob.
3. Install the burner caps and make sure that
they are seated correctly.
4. When installing the upper grills, pay attention
to place the saucepan carriers so that the
burners are centered.
DANGER
Risk of electric shock!
Switch off the electricity before cleaning
appliance to avoid an electric shock.
DANGER
Hot surfaces may cause burns!
Allow the appliance to cool down before you
clean it.
•
•
•
•
Clean the product thoroughly after each use.
In this way it will be possible to remove
cooking residues more easily, thus avoiding
these from burning the next time the
appliance is used.
No special cleaning agents are required for
cleaning the product. Use warm water with
washing liquid, a soft cloth or sponge to
clean the product and wipe it with a dry
cloth.
Always ensure any excess liquid is
thoroughly wiped off after cleaning and any
spillage is immediately wiped dry.
Do not use cleaning agents that contain
acid or chloride to clean the stainless or
inox surfaces and the handle. Use a soft
cloth with a liquid detergent (not abrasive) to
wipe those parts clean, paying attention to
sweep in one direction.
Cleaning the control panel
Clean the control panel and control knobs with a
damp cloth and wipe them dry.
Damage of the control panel!
Do not remove the control knobs for control
panel cleaning.
Cleaning the oven
No oven cleaner or any other special cleaning
agent is required for cleaning the oven. It is
recommended to wipe the oven with a damp
cloth while it is still warm.
To clean the side wall,
1. Remove the front section of the side rack by
pulling it in the opposite direction of the side
wall.
2. Remove the side rack completely by pulling
it towards you.
The surface may get damaged by some
detergents or cleaning materials.
Do not use aggressive detergents, cleaning
powder/cream or any sharp objects.
Do not use steam cleaners for cleaning.
26/EN
Clean oven door
Don't use any harsh abrasive cleaners or sharp
metal scrapers for cleaning the oven door. They
could scratch the surface and destroy the glass.
Removal of oven door
1. Open the front door.
2. Open the clips at the hinge housing on the
right and left hand sides of the front door by
pressing them down as illustrated in the
figure.
Steps carried out during removing process
should be performed in reverse order (steps
4, 3, 2 and 1) to reattach the door. Do not
forget to close the clips at the hinge housing
when reinstalling the door.
Replacing the oven lamp
DANGER
Hot surfaces may cause burns!
Make sure that the appliance is switched off
and cooled down in order to avoid the risk
of an electrical shock.
1
2
3
Front door
Hinge
Oven
The oven lamp is a special electric light bulb
that can resist up to 300 °C. See Technical
specifications, page 5 for details. Oven
lamps can be obtained from Authorised
Service Agents.
Position of lamp might vary from the figure.
If your oven is equipped with a round
lamp:
1. Disconnect the product from mains.
2. Turn the glass cover counter clockwise to
remove it.
3. Move the front door to half-way.
4. Remove the front door by pulling it upwards
to release it from the right and left hinges.
3. Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4. Install the glass cover.
27/EN
8 Troubleshooting
Oven emits steam when it is in use.
It is normal that steam escapes during operation. This is not a fault.
Product emits metal noises while heating and cooling.
When the metal parts are heated, they may expand and cause noise. This is not a fault.
Product does not operate.
•
•
The mains fuse is defective or has tripped. >>> Check fuses in the fuse box. If necessary,
replace or reset them.
Product is not plugged into the (grounded) socket. >>> Check the plug connection.
Oven light does not work.
•
•
Oven lamp is defective. >>> Replace oven lamp.
Power is cut. >>> Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
Oven does not heat.
•
•
•
Function and/or Temperature are not set. >>> Set the function and the temperature with the
Function and/or Temperature knob/key.
In models equipped with a timer, the timer is not adjusted. >>> Adjust the time.
(In products with microwave oven, timer controls only microwave oven.)
Power is cut. >>> Check if there is power. Check the fuses in the fuse box. If necessary,
replace or reset the fuses.
There is no ignition spark.
•
•
No current. >>> Check fuses in the fuse box.
Time is not set. >>> Set the time.
There is no gas.
•
•
Main gas valve is closed. >>> Open gas valve.
Gas pipe is bent. >>> Install gas pipe properly.
Burners are not burning properly or at all.
•
•
•
•
•
Burners are dirty. >>> Clean burner components.
Burners are wet. >>> Dry the burner components.
Burner cap is not mounted safely. >>> Mount the burner cap properly.
Gas valve is closed. >>> Open gas valve.
Gas cylinder is empty (when using LPG). >>> Replace gas cylinder.
(In models with timer) Clock display is blinking or clock symbol is on.
•
A previous power outage has occurred. >>> Adjust the time / Switch of the product and switch
it on again.
Consult the Authorised Service Agent or the dealer where you have purchased the product if you can
not remedy the trouble although you have implemented the instructions in this section. Never attempt to
repair a defective product yourself.
28/EN
9 GUARANTEE and SERVICE
29/EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement