Linecard - Midas Components Ltd
MidasBrochure.qxd
21/10/09
12:04
Page 1
From Design Concept to Final Product Fruition
TFT / Graphic
LCD
Character LCD
LED’s
Ultrasonic
Sensor
Audible
Devices
Inductors /
Chokes
SMD Filter
Chips
Low Pass
Feed-Thru Filters
The Specialist Electronics Components Distributor
Supporting Customers from
Design Concept to Full Production
Audible Devices
Specialist Electronics Components Distributor
■
■
■
■
Opto Electronics
In August 2009 Midas
Components Limited
entered its 10th year of
servicing customers from
design concept through to
production and onto
obsolescence
management.
Audible Products
Displays
EMC / EMI
Ferrites
LED / Lamps
Ultrasonic Sensors
Wound Products
The Company specialises in
the promotion of Opto
Electronics, Audible Devices,
EMC Components, and
Ultrasonic Sensor Products.
Midas prides itself on its
engineering product
knowledge and commercial
servicing expertise.
Mains Filters
Our aim is to exceed our
customers and suppliers
expectations!
Filtered D-Sub
Connectors
Circular
Connectors
Filter Plate
CATALOGUE
Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU
Tel: 01493 602602
Fax: 01493 665111
sales@midascomponents.co.uk
www.midascomponents.co.uk
Piezo elements
Piezo and magnetic buzzers
Piezo and magnetic transducers
PCB, pinned, SMD, panel mount
SHORTFORM CATALOGUE
■
■
■
■
■
■
■
■
■
■
■
Character LCDs
Graphic LCDs
TFT LCDs
VFDs
LEDs
Accessories: cables, connectors, bezels etc
Short leadtimes
Low volume customisation
Innovative product development
Demonstration facility
Engineering and design support
Ultrasonic Products
■
■
■
■
■
■
■
■
Transmitters and Receivers
Sonar ranging transceivers
Narrow beam types
Open and enclosed versions
Ranging modules and ICs
Matching transformers
Atomisers/nebulisers
Film vibration sensors
EMI/EMC Products
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Low pass filters
Filtered connectors
Surface mount filters
Power filters
Filter plates
Filtered terminal blocks
RF inductors - leaded and SMD
Power inductors - leaded and SMD
Transformers
Ferrite beads - leaded and SMD
Ferrite cable clamps
Ferrite materials
Gaskets and Shielding products
Patch antennas and assemblies
MIL spec approvals
SHORTFORM
MidasBrochure.qxd
21/10/09
12:04
Page 1
From Design Concept to Final Product Fruition
TFT / Graphic
LCD
Character LCD
LED’s
Ultrasonic
Sensor
Audible
Devices
Inductors /
Chokes
SMD Filter
Chips
Low Pass
Feed-Thru Filters
The Specialist Electronics Components Distributor
Supporting Customers from
Design Concept to Full Production
Audible Devices
Specialist Electronics Components Distributor
■
■
■
■
Opto Electronics
In August 2009 Midas
Components Limited
entered its 10th year of
servicing customers from
design concept through to
production and onto
obsolescence
management.
Audible Products
Displays
EMC / EMI
Ferrites
LED / Lamps
Ultrasonic Sensors
Wound Products
The Company specialises in
the promotion of Opto
Electronics, Audible Devices,
EMC Components, and
Ultrasonic Sensor Products.
Midas prides itself on its
engineering product
knowledge and commercial
servicing expertise.
Mains Filters
Our aim is to exceed our
customers and suppliers
expectations!
Filtered D-Sub
Connectors
Circular
Connectors
Filter Plate
CATALOGUE
Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU
Tel: 01493 602602
Fax: 01493 665111
sales@midascomponents.co.uk
www.midascomponents.co.uk
Piezo elements
Piezo and magnetic buzzers
Piezo and magnetic transducers
PCB, pinned, SMD, panel mount
SHORTFORM CATALOGUE
■
■
■
■
■
■
■
■
■
■
■
Character LCDs
Graphic LCDs
TFT LCDs
VFDs
LEDs
Accessories: cables, connectors, bezels etc
Short leadtimes
Low volume customisation
Innovative product development
Demonstration facility
Engineering and design support
Ultrasonic Products
■
■
■
■
■
■
■
■
Transmitters and Receivers
Sonar ranging transceivers
Narrow beam types
Open and enclosed versions
Ranging modules and ICs
Matching transformers
Atomisers/nebulisers
Film vibration sensors
EMI/EMC Products
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Low pass filters
Filtered connectors
Surface mount filters
Power filters
Filter plates
Filtered terminal blocks
RF inductors - leaded and SMD
Power inductors - leaded and SMD
Transformers
Ferrite beads - leaded and SMD
Ferrite cable clamps
Ferrite materials
Gaskets and Shielding products
Patch antennas and assemblies
MIL spec approvals
SHORTFORM
MidasBrochure.qxd
21/10/09
12:04
Page 2
Ultrasonic Products
Sensors
Prowave Sanwa
B-Star
Piezo and Electrostatic
Technologies
Wide and Narrow
Beam Versions
Open Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
10mm
32.8KHz
12mm
40KHz
16mm
50KHz
18mm
24mm
Aluminium or plastic case
versions
Mirror Bender mounted pair
Enclosed Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
8mm
32.8KHz
18mm
40KHz
25mm
Aluminium cases
Open Pulse Transit
(Sonar) Type
Frequencies:
Diameters:
40KHz
16mm
Aluminium or plastic case
versions
Enclosed Pulse Transit
Types
Frequencies:
Diameters:
40KHz
8mm
48KHz
9.3mm
80KHz
13mm
125KHz
18mm
200KHz
25mm
235KHz
36.5mm
320KHz
Aluminium cases, various seals
Asymmetrical beam type
Temperature Compensated types
Underwater Sonar
Type
Frequencies:
Diameters:
200KHz
45mm
Sealed case assembly with cable
and connector
Opto Electronics
Accessories &
Transducers
Monochrome
LCD Character
Monochrome
LCD Graphic
TFT LCD
VFD
Prowave
Batron Everbouquet
Fordata Midas
Optrex
Batron Everbouquet
Fordata Midas
Optrex
Batron
Everbouquet
Optrex
Zhejiang BOE
Sensor
Accessories
1 x 8 9mm, 13mm 15mm C.H.
2 x 8 3mm, 5mm C.H.
1 x 10 8mm C.H.
1 x 16 5mm, 6mm, 8mm, 9mm,
Matching Transformers
11mm, 14mm C.H.
Step up 10:1, various Qs
1 x 20 9mm, 12mm C.H.
2 x 16 3mm, 4mm, 5mm, 8mm,
Tuner Crystals
9mm, C.H.
40KHz type
2 x 20 3mm, 5mm, 8mm, 9mm,
12mm C.H.
Ranging ICs
2 x 24 5mm C.H.
For driving sonar type
2 x 40 3mm, 5mm, 8mm C.H.
transducers
4 x 16 5mm, C.H.
4 x 20 5mm, 8mm, 9mm,
Development Ranging
12mm,
Modules
4 x 40 5mm, 8mm C.H.
Will drive most pulse transit types
6 x 20 5mm C.H.
Rubber Sleeves
For added protection
Reversing Module Kits
40KHz, 0.3-1.5m, cased.
With connector
Chip on Board (COB)
Chip on Glass (COG)
TN, STN, FSTN
Reflective, Transflective
Logic Supply: 3v, 3.3v or 5v
Chip on Board (COB)
80 x 16
84 x 32
96 x 16
100 x 32
100 x 64
120 x 32
122 x 32
128 x 64
128 x 128
138 x 110
160 x 32 (Chinese Char. Set)
160 x 128
160 x 140
192 x 32 (Chinese Char. Set)
200 x 16
200 x 32
240 x 64
240 x 128
256 x 64
320 x 240
640 x 200
640 x 240
640 x 480
Chip on Glass (COG)
Interface
Parallel/Serial
96 x 40
160 x 128
Low Profile Bezel Options 4.5mm 120 x 32
240 x 64
COG 5.5mm, 6.4mm, 7mm,
128 x 32
240 x 320
7.8mm, 8.9mm, 9.5mm COB
128 x 128
320 x 240
with LED Backlights
132 x 33
(I2C)
Transducers
PVDF type Omni
Directional Sensors
Frequencies:
Diameters:
40KHz
4.9mm
77KHz
11mm
Polyvinylidene fluoride open
construction
Immersion Atomiser
1.65MHz, 25mm diameter
Up to 400cc/hr
Micro-Nozzle Atomiser
135KHz, non-immersible, low
power
Piezo Electric Film
Sensor
PVF2 sheet to sense vibration,
motion, impact, pressure etc
Bolt Clamped High
Power Transducers
For ultrasonic cleaning, welding,
etc
28.2KHz types
40KHz types
Products are RoHS Compliant
30 Micron Dot Gap
TN, STN, FSTN
15 Micron Dot Gap for
'smoother' character
appearance.
Reflective, Transflective
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
LED Backlight Options Yellowgreen, White, Blue, Red, Amber,
Orange
Font Set Options:
English/Japanese (standard)
English/European
English/Cyrillic
Others available
Logic Supply: 3v, 3.3v or 5v
Parallel/Serial (I2C) Interface
30 Micron Dot Gap
10 and 15 Micron Dot Gap for
'smoother' character
appearance.
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
1.5” (128 x 128)
1.5” (176 x 132)
1.7” (128 x 160)
1.9” (176 x 220)
2.4” (240 x 320)
2.5” (480 x 234)
2.8” (240 x 320)
3.0” (240 x 400)
3.2” (240 x 320)
3.5” (240 x 320)
3.5” (320 x 240)
3.5” (480 x 234)
4.3” (480 x 272)
4.3” (800 x 480)
4.9” (320 x 96)
5.0” (800 x 480)
5.7” (320 x 240)
6.5” (640 x 480)
8.4” (640 x 480)
8.4” (1024 x 768)
9.0” (800 x 480)
10.4” (640 x 480)
10.4” (800 x 600)
12.1” (800 x 600)
12.1” (1024 x 768)
12.1” (1280 x 800)
14.1” (1280 x 800)
15.0” (1024 x 768)
17.5” (1280 x 800)
Glass Only
Analogue / Digital
Various
Transmissive
Serial / Parallel Int
Transflective
Brightness Control
Anti-Glare
Operating Temperatures
(-20…70°C)
Anti-Reflective
LED and CCFL Backlights
EMI/EMC Products
Star Burst Modules
Midas
Components
LED
Low Pass
Filters
Filtered
Connectors
Surface Mount
Filters
Power Filters
Arrays
Patch Antennas and
Assemblies / Gaskets
and Shielding
Wound
Products
Ferrites
Piezo
Magnetic
Design and
Development Services
Haw Shuenn
Stanley
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
API Delevan
Easy Magnet
Kitagawa
API Delevan
Kitagawa
Koyo
KEPO
Koyo
KEPO
Patch Antenna
Applications
Satellite based:
GPS Commercial (L1) & Military
(L2), Globalstar
Iridium, Inmarsat
Commercial based:
ISM (Industry, Scientific and
Medical), Zigbee,
Bluetooth, RFID
SM Patch Antenna
Elements
1GHz to 6GHz
Small footprint: 13mm to 50mm
square (excluding the ground plane)
Low profile: typically <8mm
Flexible: Antennas can be tuned
and optimised very easily making
prototyping quick and cost effective
Versatile: transmit and receive
circularly polarised signals and
linearly polarised signals
Omni-directional
Performance: typical gain response
from 0 dbi to 3 dbi for half-power
bandwidths of 110º.
Dual Frequency: 45mm footprint
with 2 frequencies packaged in
single component
Patch Antenna
Assemblies
Cable and connector options
“Plug and Play” complete
assemblies completely packaged in
protective radome
3-D computer modelling to
optimise antenna performance
I/O Gaskets
Flat gaskets, Waved Metal gaskets,
Fabric over foam gaskets, Woven
and non-woven options
Standard D-sub connector shapes
9, 15, 25, 37 and 50 way
Shielding effectiveness
range/performance 1MHz to 5GHz
Temperature range: -55ºC to
+125ºC
Fabric over Foam Profile Gaskets
Temperature range: -40ºC to +90ºC
Tensile strength: up to 80lb/in
Flammability rating: UL94
Shielding Tapes and
Fabrics
Wire Mesh Gaskets
Elastomer Core Mesh
Gaskets
Conductive Elastomers
RF & Power Inductors
Shielded and Unshielded
Ranges
Military operating temperature
range: -55ºC to +125ºC available
on many types
Close tolerance options to ±1% on
many ranges
Termination finish options: RoHS
Compliant, Traditional lead based,
QPL
Custom designs
Surface Mount Types
Inductance : RF : 1nH to 27mH
Power : 0.22µH to 22mH
Power types current ratings to 24
Amps
MIL spec approvals :
• RF types to MIL-PRF-83446
• Power types to MIL-PRF-27
RF : COTS equivalents
Application specific styles:
RF types : Micro-I, Wire bondable,
Low profile, Temperature stable,
High Q Air core, High SRF, Toroidal,
Multilayer ceramic
Power types : Micro-I, Low profile,
Toroids, Power chokes, Low profile
power toroids, High current power
toroids, Low loss toroids
Design kits
Leaded Types
Axial styles
RF : Inductance 0.1µH to 33mH
MIL spec approvals to MIL-PRF15305, MIL-PRF-39010 established reliability ranges to
failure rate level R, COTS
equivalents
Epoxy molded construction,
Variable types
Power : Inductance 0.22µH to
100mH, current ratings to
9.75Amps
Lead forming
Radial Styles
RF : Inductance 0.1µH to 150mH
Toroidal types, Variable types
Power : Inductance 1µH to 15mH,
current ratings to 19.9 Amps
Application specific styles:
Horizontal and vertical mount
power toroids, Filter chokes, Power
line chokes, HF switchmode power
toroids
Transformers
Surface mount and leaded
common mode versions - Low
profile types - Switchmode types
on a variety of ferrite cores.
Design Support
Dot Matrix Modules
1 x 16 Star Burst
We offer full demo
capabilities and technical
advice to assist our
customers' designs.
1 x 16 LCD Equiv.
85mm x 36mm
1 x 16 11mm C.H.
1 x 16 12.5mm C.H
1 x 16 14.7mm C.H.
Engineering
Support
2 x 16 LCD Equiv.
80mm x 36mm
85mm x 36mm
122 x 44mm
Through customer visits,
telephone, email and
internet.
1 x 20 5mm C.H.
1 x 20 9mm C.H.
2 x 20 LCD Equiv.
116 x 37
146 x 43
Semi Custom
Solutions:
2 x 20 10.5mm C.H.
Adding Connector and
Cable Assemblies to Display
Modules
2 x 40 LCD Equiv.
182mm x 33.5mm
4 x 20 5mm C.H.
4 x 20 9mm C.H.
Resistor changes
Etc...
Graphic VFD
High Power
Microwave Filters
10W / 20W / 50W / 100W
Solder-in, Press-in or Threaded
Green / Blue / White
Circuit type: C
Qualified to MIL-C-11015
Insertion Loss range:
effective filtering from
1MHz to 18GHz
High Power
1W / 3W / 5W
Red / Green / Yellow / Blue /
White
High Power for IR
Reflow
Custom Display
Modules
Custom VFD at only 500 MOQ
Design support and
manufacture of display
modules to meet customers
exact requirement
Capacitance: up to 30nF
Rated voltage: up to
200VDC, 115VAC, 400Hz
Current rating: 5 Amps
Temperature range: -55ºC to
+125ºC.
1W 3W
Red / Green / Yellow / Blue /
White / R.G.B.
Resin Seal Filters
Solder-in or Threaded
Laser
Circuit type: C, L, Pi
TO-18 / TO-5 / Module
Qualified to MIL-F-15733
Insertion Loss range: effective
filtering from 1MHz to 18GHz
SMD
1210 / 1206 / 1204 / 0805 /
0603
Various lens types
Wide
Capacitance: up to 1.4uF
Rated voltage: up to
2500VDC, 240VAC, 400Hz
Various colours
Current rating: up to
100 Amps
Leaded
Temperature range: -55ºC to
+125ºC
Various types
Custom options.
Various colours
High Brightness Backlights (up to
1500 cd/m2)
Infrared
Hermetically Sealed
Filters
Wave length
Wide range of thread sizes
Wide Viewing Angles
940 / 880 / 875 / 850 /
nm
Touch-Screen Options
Plug and Play Solutions
Driver Card and Interface
Solutions
LED Backlight Options: R.G.B.
Yellow-Green, White, Blue, Red,
Amber, Orange
Full Custom
Solutions
Design and manufacture of
front panel to include
Display, Buzzer, LED's, Key
Pads
Etc...
770
Circuit type: C, L, Pi, transient
suppression Pi, T and TT
Qualified to MIL-F-15733,
MIL-C-28861 and DSCC 84084
Photodiode
Phototransistors
Receiver Modules
Insertion Loss range: effective
filtering from 30kHz to 18GHz
Capacitance: up to 5.2uF
Rated voltage: up to
400VDC, 240VAC, 400Hz
Current rating: up to 30 Amps
Sizes and variants added all the time
Products are RoHS Compliant
Audible Devices
Temperature range: 55ºC to +125ºC
Custom options.
Filtered D-Subminiature
Connectors and
Adaptors
Ferrite
Chip Cap
Low Profile
High Performance
High Density
Circuit type: Ferrite, C, Pi
Number of lines: 9, 15, 25, 37
and 50 Standard density; 15, 26,
44, 62 and 78 High density
Wide range of connecting and
mounting options
Insertion Loss range: 1MHz to
18GHz
Rated voltage: 500VDC to
1000VDC
Current rating: 5 Amps.
Filtered D-Subminiature
Combo Connectors
Signal and power pins in
standard D sub shell sizes
Wide range of configurations and
mounting options
Circuit type: C
Insertion Loss range: 1MHz to
18GHz
Current rating:
Signal 5 Amps,
Power 40 Amps
Filtered & ESD
Protection Datacom
Connectors
Modular Jack
Mini Din
Miniature Ribbon
USB
Ferrite and Capacitive filtering
Insertion Loss range: 1MHz to
18GHz
Current rating: 5 Amps
Circular Connectors
Tubular and planar filtered arrays
using
C, Pi, LC and T circuits
MIL qualified
Insertion Loss range: 1MHz to
18GHz
Rated voltage: up to
1000VDC, 125VAC, 400Hz
Custom options.
Power SM Filters
Square SM Filters
Round SM Filters
Mini SM Filters
Circuit type: C, Pi
High Current Feedthru
Filters
Filtered Terminal
Blocks
Bolt-in style
Barrier Strip
Insertion Loss range:
AC: 1MHz to 1GHz
DC: 150kHz to 10GHz
2 to 6 terminals
Circuit type: Pi
Capacitance: 4.7µF max
Insertion Loss range: effective
filtering from 1MHz to 18GHz in a Rated voltage: up to 1000VDC
shielded application
and 240VAC
Approvals:
UL recognised
CSA approved
Capacitance: 68pF to 0.01µF
Current rating: up to 500 Amps
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Rated voltage: up to 200VDC
Custom options
Capacitance: 2500pF to 5200pF
Current rating: up to 20 Amps
Power Entry Modules
Rated voltage: 250VAC
Bolt-in rear terminals
Bolt-in right angle terminals
High Frequency Bolt-in with
solder lugs
Snap-in with wire leads
Current rating: 20 Amps
0603
0805
1205
1806
Switched and fused
PCB Mount
Approvals:
2 to 12 terminals
Circuit type: C
Insertion Loss range: effective
filtering from 1MHz to 18GHz
Temperature range: -55ºC to
+125ºC
Three Terminal Chip
Filters
Capacitance: up to 0.22µF
Current rating: up to 2 Amps
LC Filters
0603
0805
1206
Rated voltage: 25VDC
DC Capacitance: 2500pF
Current rating: 12 Amps
Temperature range: -40ºC to
+80ºC
Power Line and 3
Phase Power Line
LZ Filters
Approvals:
0402
0603
Band stop filter
Centre frequency range: 10MHz
to 2GHz
Rated voltage: 100VDC
Temperature range: -25ºC to
+85ºC
Temperature range: -40ºC to
+85ºC
SM Filter Arrays
Mini SM Power Filters
Miniature PCB Power Filters
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Current rating: up to 15 Amps
Fast-on or bolt-in terminals or
wire leads
Single and dual stage
Plastic and metal cases
Current rating: 100mA
Also available:
Circuit type: Pi
Low leakage current versions for
medical applications
Cut-off frequency: up to 220MHz
Current rating: up to 100mA
Termination options
UL recognised
CSA certified
TÜV approved
Rated voltage:
to 250VAC 60Hz
Rated voltage: up to 100VDC
Temperature range: -55ºC to
+105ºC
UL recognised
CSA certified
TÜV approved
5mm or 5.08mm pin spacing
Filter Plates
Bolt-in, Easy Mate®, Shrouded
Latch
Circuit type: C, Pi
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Capacitance: C type: 68pF to
4000pF
Insertion Loss range: effective
filtering from 30kHz to 30MHz
Pi type: 68pF to 5000pF
Rated voltage:
48VDC to 250VAC 60Hz
250VAC to 440VAC (3 phase)
Current rating: up to 5 Amps
Current rating:
1 Amp to 100 Amps
3 Amps to 200 Amps (3 phase)
Standard or high density options
Temperature range:
-25ºC to +85ºC
-40ºC to +85ºC (3 phase)
Single or double row options
Voltage rating: up to 250VDC
Temperature range: -55ºC to
+125ºC
Termination options
Products are RoHS Compliant (non-RoHS versions available)
Ferrite Beads
Piezo Diaphragms
Transducers (Buzzers)
Leaded Types
Brass, steel, and alloy versions
Continuous tone
Wide range of impedances
available
With or without flying leads
Require external drive electronics
Termination finish options: RoHS
Compliant, raditional lead based
External drive or self drive types
PCB pin and flying lead options
10 to 30mm diameters
Surface Mount Versions
Frequencies from 2KHz to
10KHz
Washable PCB case types
Axial Filter Beads
Wound Beads
From 1_ to 4_ turns
Surface Mount Types
Wide range of impedances
available
Termination finish options: RoHS
Compliant, raditional lead based
Current ratings to 9.5 Amps
Filter Bead
Common Mode Bead
High speed, high frequency and
general circuit types
Ringers & Transducers
(Buzzers)
Continuous tone
Require external drive electronics
2 and 3 connection versions
Side aperture versions
Frequencies : 1953Hz through
to 3100Hz
SPL : up to 98dB at 10cm
Rated Voltage :
1.5V
5V
6V
12V
PCB pin and flying lead options
Washable PCB case types
Square wave, 1/2 duty
Bead Arrays
Frequencies : 0.8KHz through to
4.8KHz
Available in package sizes from
0402 to 1812
SPL : up to 95dB at 30cm
Buzzers/Sounders
Rated Voltage : 12Vp-p
Continuous tone
Max Voltage : 30Vp-p
Built in driving circuit
Voltage on 3 pin type : 9VDC,
12VDC, and 30VDC
PCB pin and flying lead options
Ringers & Transducers
(Buzzers)
Frequencies : 400Hz through to
3100Hz
Continuous, slow pulse, fast
pulse, and mixed tones
SPL : up to 85dB at 10cm
Cable Clamps
Split Types for Round
Cable
Cable diameters from 3 to 27mm
Flat types
Cable widths from 6.5mm to 65m
Cylindrical Types
Internal diameters from 0.8mm to
36mm
External diameters from 2.5mm to
61.4mm
Built in driving circuit
Washable PCB case types
Rated Voltage :
PCB pin, flying lead and panel
mount options
1.8VDC
3VDC
5VDC
9VDC
12VDC
Materials
Washable PCB case types
Effective EMI suppression over a
wide frequency range - 10MHz to
3GHz
Frequencies : 2.0KHz through to
Sirens available on request
4.0KHz
Custom potential on all
SPL : up to 105dB at 30cm
audible technologies
Rated DC Voltage :
3VDC
6VDC
9VDC
12VDC
24VDC
AC type voltages :
12VAC
110VAC
220VAC
230VAC
Flexible Ferrite
Absorbent Tubing
Internal diameter from 1.8mm to
10mm
External diameter from 2.9mm to
14mm
Flexible Ferrite
Absorbent Material
Sheet thicknesses from 0.25mm to
2.5mm
Sheet sizes from 100mm x 100mm
to 400mm x 400mm
D Sub Connector Ferrite
Plates
9 way to 37 way options
Products are RoHS Compliant
MidasBrochure.qxd
21/10/09
12:04
Page 2
Ultrasonic Products
Sensors
Prowave Sanwa
B-Star
Piezo and Electrostatic
Technologies
Wide and Narrow
Beam Versions
Open Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
10mm
32.8KHz
12mm
40KHz
16mm
50KHz
18mm
24mm
Aluminium or plastic case
versions
Mirror Bender mounted pair
Enclosed Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
8mm
32.8KHz
18mm
40KHz
25mm
Aluminium cases
Open Pulse Transit
(Sonar) Type
Frequencies:
Diameters:
40KHz
16mm
Aluminium or plastic case
versions
Enclosed Pulse Transit
Types
Frequencies:
Diameters:
40KHz
8mm
48KHz
9.3mm
80KHz
13mm
125KHz
18mm
200KHz
25mm
235KHz
36.5mm
320KHz
Aluminium cases, various seals
Asymmetrical beam type
Temperature Compensated types
Underwater Sonar
Type
Frequencies:
Diameters:
200KHz
45mm
Sealed case assembly with cable
and connector
Opto Electronics
Accessories &
Transducers
Monochrome
LCD Character
Monochrome
LCD Graphic
TFT LCD
VFD
Prowave
Batron Everbouquet
Fordata Midas
Optrex
Batron Everbouquet
Fordata Midas
Optrex
Batron
Everbouquet
Optrex
Zhejiang BOE
Sensor
Accessories
1 x 8 9mm, 13mm 15mm C.H.
2 x 8 3mm, 5mm C.H.
1 x 10 8mm C.H.
1 x 16 5mm, 6mm, 8mm, 9mm,
Matching Transformers
11mm, 14mm C.H.
Step up 10:1, various Qs
1 x 20 9mm, 12mm C.H.
2 x 16 3mm, 4mm, 5mm, 8mm,
Tuner Crystals
9mm, C.H.
40KHz type
2 x 20 3mm, 5mm, 8mm, 9mm,
12mm C.H.
Ranging ICs
2 x 24 5mm C.H.
For driving sonar type
2 x 40 3mm, 5mm, 8mm C.H.
transducers
4 x 16 5mm, C.H.
4 x 20 5mm, 8mm, 9mm,
Development Ranging
12mm,
Modules
4 x 40 5mm, 8mm C.H.
Will drive most pulse transit types
6 x 20 5mm C.H.
Rubber Sleeves
For added protection
Reversing Module Kits
40KHz, 0.3-1.5m, cased.
With connector
Chip on Board (COB)
Chip on Glass (COG)
TN, STN, FSTN
Reflective, Transflective
Logic Supply: 3v, 3.3v or 5v
Chip on Board (COB)
80 x 16
84 x 32
96 x 16
100 x 32
100 x 64
120 x 32
122 x 32
128 x 64
128 x 128
138 x 110
160 x 32 (Chinese Char. Set)
160 x 128
160 x 140
192 x 32 (Chinese Char. Set)
200 x 16
200 x 32
240 x 64
240 x 128
256 x 64
320 x 240
640 x 200
640 x 240
640 x 480
Chip on Glass (COG)
Interface
Parallel/Serial
96 x 40
160 x 128
Low Profile Bezel Options 4.5mm 120 x 32
240 x 64
COG 5.5mm, 6.4mm, 7mm,
128 x 32
240 x 320
7.8mm, 8.9mm, 9.5mm COB
128 x 128
320 x 240
with LED Backlights
132 x 33
(I2C)
Transducers
PVDF type Omni
Directional Sensors
Frequencies:
Diameters:
40KHz
4.9mm
77KHz
11mm
Polyvinylidene fluoride open
construction
Immersion Atomiser
1.65MHz, 25mm diameter
Up to 400cc/hr
Micro-Nozzle Atomiser
135KHz, non-immersible, low
power
Piezo Electric Film
Sensor
PVF2 sheet to sense vibration,
motion, impact, pressure etc
Bolt Clamped High
Power Transducers
For ultrasonic cleaning, welding,
etc
28.2KHz types
40KHz types
Products are RoHS Compliant
30 Micron Dot Gap
TN, STN, FSTN
15 Micron Dot Gap for
'smoother' character
appearance.
Reflective, Transflective
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
LED Backlight Options Yellowgreen, White, Blue, Red, Amber,
Orange
Font Set Options:
English/Japanese (standard)
English/European
English/Cyrillic
Others available
Logic Supply: 3v, 3.3v or 5v
Parallel/Serial (I2C) Interface
30 Micron Dot Gap
10 and 15 Micron Dot Gap for
'smoother' character
appearance.
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
1.5” (128 x 128)
1.5” (176 x 132)
1.7” (128 x 160)
1.9” (176 x 220)
2.4” (240 x 320)
2.5” (480 x 234)
2.8” (240 x 320)
3.0” (240 x 400)
3.2” (240 x 320)
3.5” (240 x 320)
3.5” (320 x 240)
3.5” (480 x 234)
4.3” (480 x 272)
4.3” (800 x 480)
4.9” (320 x 96)
5.0” (800 x 480)
5.7” (320 x 240)
6.5” (640 x 480)
8.4” (640 x 480)
8.4” (1024 x 768)
9.0” (800 x 480)
10.4” (640 x 480)
10.4” (800 x 600)
12.1” (800 x 600)
12.1” (1024 x 768)
12.1” (1280 x 800)
14.1” (1280 x 800)
15.0” (1024 x 768)
17.5” (1280 x 800)
Glass Only
Analogue / Digital
Various
Transmissive
Serial / Parallel Int
Transflective
Brightness Control
Anti-Glare
Operating Temperatures
(-20…70°C)
Anti-Reflective
LED and CCFL Backlights
EMI/EMC Products
Star Burst Modules
Midas
Components
LED
Low Pass
Filters
Filtered
Connectors
Surface Mount
Filters
Power Filters
Arrays
Patch Antennas and
Assemblies / Gaskets
and Shielding
Wound
Products
Ferrites
Piezo
Magnetic
Design and
Development Services
Haw Shuenn
Stanley
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
API Delevan
Easy Magnet
Kitagawa
API Delevan
Kitagawa
Koyo
KEPO
Koyo
KEPO
Patch Antenna
Applications
Satellite based:
GPS Commercial (L1) & Military
(L2), Globalstar
Iridium, Inmarsat
Commercial based:
ISM (Industry, Scientific and
Medical), Zigbee,
Bluetooth, RFID
SM Patch Antenna
Elements
1GHz to 6GHz
Small footprint: 13mm to 50mm
square (excluding the ground plane)
Low profile: typically <8mm
Flexible: Antennas can be tuned
and optimised very easily making
prototyping quick and cost effective
Versatile: transmit and receive
circularly polarised signals and
linearly polarised signals
Omni-directional
Performance: typical gain response
from 0 dbi to 3 dbi for half-power
bandwidths of 110º.
Dual Frequency: 45mm footprint
with 2 frequencies packaged in
single component
Patch Antenna
Assemblies
Cable and connector options
“Plug and Play” complete
assemblies completely packaged in
protective radome
3-D computer modelling to
optimise antenna performance
I/O Gaskets
Flat gaskets, Waved Metal gaskets,
Fabric over foam gaskets, Woven
and non-woven options
Standard D-sub connector shapes
9, 15, 25, 37 and 50 way
Shielding effectiveness
range/performance 1MHz to 5GHz
Temperature range: -55ºC to
+125ºC
Fabric over Foam Profile Gaskets
Temperature range: -40ºC to +90ºC
Tensile strength: up to 80lb/in
Flammability rating: UL94
Shielding Tapes and
Fabrics
Wire Mesh Gaskets
Elastomer Core Mesh
Gaskets
Conductive Elastomers
RF & Power Inductors
Shielded and Unshielded
Ranges
Military operating temperature
range: -55ºC to +125ºC available
on many types
Close tolerance options to ±1% on
many ranges
Termination finish options: RoHS
Compliant, Traditional lead based,
QPL
Custom designs
Surface Mount Types
Inductance : RF : 1nH to 27mH
Power : 0.22µH to 22mH
Power types current ratings to 24
Amps
MIL spec approvals :
• RF types to MIL-PRF-83446
• Power types to MIL-PRF-27
RF : COTS equivalents
Application specific styles:
RF types : Micro-I, Wire bondable,
Low profile, Temperature stable,
High Q Air core, High SRF, Toroidal,
Multilayer ceramic
Power types : Micro-I, Low profile,
Toroids, Power chokes, Low profile
power toroids, High current power
toroids, Low loss toroids
Design kits
Leaded Types
Axial styles
RF : Inductance 0.1µH to 33mH
MIL spec approvals to MIL-PRF15305, MIL-PRF-39010 established reliability ranges to
failure rate level R, COTS
equivalents
Epoxy molded construction,
Variable types
Power : Inductance 0.22µH to
100mH, current ratings to
9.75Amps
Lead forming
Radial Styles
RF : Inductance 0.1µH to 150mH
Toroidal types, Variable types
Power : Inductance 1µH to 15mH,
current ratings to 19.9 Amps
Application specific styles:
Horizontal and vertical mount
power toroids, Filter chokes, Power
line chokes, HF switchmode power
toroids
Transformers
Surface mount and leaded
common mode versions - Low
profile types - Switchmode types
on a variety of ferrite cores.
Design Support
Dot Matrix Modules
1 x 16 Star Burst
We offer full demo
capabilities and technical
advice to assist our
customers' designs.
1 x 16 LCD Equiv.
85mm x 36mm
1 x 16 11mm C.H.
1 x 16 12.5mm C.H
1 x 16 14.7mm C.H.
Engineering
Support
2 x 16 LCD Equiv.
80mm x 36mm
85mm x 36mm
122 x 44mm
Through customer visits,
telephone, email and
internet.
1 x 20 5mm C.H.
1 x 20 9mm C.H.
2 x 20 LCD Equiv.
116 x 37
146 x 43
Semi Custom
Solutions:
2 x 20 10.5mm C.H.
Adding Connector and
Cable Assemblies to Display
Modules
2 x 40 LCD Equiv.
182mm x 33.5mm
4 x 20 5mm C.H.
4 x 20 9mm C.H.
Resistor changes
Etc...
Graphic VFD
High Power
Microwave Filters
10W / 20W / 50W / 100W
Solder-in, Press-in or Threaded
Green / Blue / White
Circuit type: C
Qualified to MIL-C-11015
Insertion Loss range:
effective filtering from
1MHz to 18GHz
High Power
1W / 3W / 5W
Red / Green / Yellow / Blue /
White
High Power for IR
Reflow
Custom Display
Modules
Custom VFD at only 500 MOQ
Design support and
manufacture of display
modules to meet customers
exact requirement
Capacitance: up to 30nF
Rated voltage: up to
200VDC, 115VAC, 400Hz
Current rating: 5 Amps
Temperature range: -55ºC to
+125ºC.
1W 3W
Red / Green / Yellow / Blue /
White / R.G.B.
Resin Seal Filters
Solder-in or Threaded
Laser
Circuit type: C, L, Pi
TO-18 / TO-5 / Module
Qualified to MIL-F-15733
Insertion Loss range: effective
filtering from 1MHz to 18GHz
SMD
1210 / 1206 / 1204 / 0805 /
0603
Various lens types
Wide
Capacitance: up to 1.4uF
Rated voltage: up to
2500VDC, 240VAC, 400Hz
Various colours
Current rating: up to
100 Amps
Leaded
Temperature range: -55ºC to
+125ºC
Various types
Custom options.
Various colours
High Brightness Backlights (up to
1500 cd/m2)
Infrared
Hermetically Sealed
Filters
Wave length
Wide range of thread sizes
Wide Viewing Angles
940 / 880 / 875 / 850 /
nm
Touch-Screen Options
Plug and Play Solutions
Driver Card and Interface
Solutions
LED Backlight Options: R.G.B.
Yellow-Green, White, Blue, Red,
Amber, Orange
Full Custom
Solutions
Design and manufacture of
front panel to include
Display, Buzzer, LED's, Key
Pads
Etc...
770
Circuit type: C, L, Pi, transient
suppression Pi, T and TT
Qualified to MIL-F-15733,
MIL-C-28861 and DSCC 84084
Photodiode
Phototransistors
Receiver Modules
Insertion Loss range: effective
filtering from 30kHz to 18GHz
Capacitance: up to 5.2uF
Rated voltage: up to
400VDC, 240VAC, 400Hz
Current rating: up to 30 Amps
Sizes and variants added all the time
Products are RoHS Compliant
Audible Devices
Temperature range: 55ºC to +125ºC
Custom options.
Filtered D-Subminiature
Connectors and
Adaptors
Ferrite
Chip Cap
Low Profile
High Performance
High Density
Circuit type: Ferrite, C, Pi
Number of lines: 9, 15, 25, 37
and 50 Standard density; 15, 26,
44, 62 and 78 High density
Wide range of connecting and
mounting options
Insertion Loss range: 1MHz to
18GHz
Rated voltage: 500VDC to
1000VDC
Current rating: 5 Amps.
Filtered D-Subminiature
Combo Connectors
Signal and power pins in
standard D sub shell sizes
Wide range of configurations and
mounting options
Circuit type: C
Insertion Loss range: 1MHz to
18GHz
Current rating:
Signal 5 Amps,
Power 40 Amps
Filtered & ESD
Protection Datacom
Connectors
Modular Jack
Mini Din
Miniature Ribbon
USB
Ferrite and Capacitive filtering
Insertion Loss range: 1MHz to
18GHz
Current rating: 5 Amps
Circular Connectors
Tubular and planar filtered arrays
using
C, Pi, LC and T circuits
MIL qualified
Insertion Loss range: 1MHz to
18GHz
Rated voltage: up to
1000VDC, 125VAC, 400Hz
Custom options.
Power SM Filters
Square SM Filters
Round SM Filters
Mini SM Filters
Circuit type: C, Pi
High Current Feedthru
Filters
Filtered Terminal
Blocks
Bolt-in style
Barrier Strip
Insertion Loss range:
AC: 1MHz to 1GHz
DC: 150kHz to 10GHz
2 to 6 terminals
Circuit type: Pi
Capacitance: 4.7µF max
Insertion Loss range: effective
filtering from 1MHz to 18GHz in a Rated voltage: up to 1000VDC
shielded application
and 240VAC
Approvals:
UL recognised
CSA approved
Capacitance: 68pF to 0.01µF
Current rating: up to 500 Amps
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Rated voltage: up to 200VDC
Custom options
Capacitance: 2500pF to 5200pF
Current rating: up to 20 Amps
Power Entry Modules
Rated voltage: 250VAC
Bolt-in rear terminals
Bolt-in right angle terminals
High Frequency Bolt-in with
solder lugs
Snap-in with wire leads
Current rating: 20 Amps
0603
0805
1205
1806
Switched and fused
PCB Mount
Approvals:
2 to 12 terminals
Circuit type: C
Insertion Loss range: effective
filtering from 1MHz to 18GHz
Temperature range: -55ºC to
+125ºC
Three Terminal Chip
Filters
Capacitance: up to 0.22µF
Current rating: up to 2 Amps
LC Filters
0603
0805
1206
Rated voltage: 25VDC
DC Capacitance: 2500pF
Current rating: 12 Amps
Temperature range: -40ºC to
+80ºC
Power Line and 3
Phase Power Line
LZ Filters
Approvals:
0402
0603
Band stop filter
Centre frequency range: 10MHz
to 2GHz
Rated voltage: 100VDC
Temperature range: -25ºC to
+85ºC
Temperature range: -40ºC to
+85ºC
SM Filter Arrays
Mini SM Power Filters
Miniature PCB Power Filters
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Current rating: up to 15 Amps
Fast-on or bolt-in terminals or
wire leads
Single and dual stage
Plastic and metal cases
Current rating: 100mA
Also available:
Circuit type: Pi
Low leakage current versions for
medical applications
Cut-off frequency: up to 220MHz
Current rating: up to 100mA
Termination options
UL recognised
CSA certified
TÜV approved
Rated voltage:
to 250VAC 60Hz
Rated voltage: up to 100VDC
Temperature range: -55ºC to
+105ºC
UL recognised
CSA certified
TÜV approved
5mm or 5.08mm pin spacing
Filter Plates
Bolt-in, Easy Mate®, Shrouded
Latch
Circuit type: C, Pi
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Capacitance: C type: 68pF to
4000pF
Insertion Loss range: effective
filtering from 30kHz to 30MHz
Pi type: 68pF to 5000pF
Rated voltage:
48VDC to 250VAC 60Hz
250VAC to 440VAC (3 phase)
Current rating: up to 5 Amps
Current rating:
1 Amp to 100 Amps
3 Amps to 200 Amps (3 phase)
Standard or high density options
Temperature range:
-25ºC to +85ºC
-40ºC to +85ºC (3 phase)
Single or double row options
Voltage rating: up to 250VDC
Temperature range: -55ºC to
+125ºC
Termination options
Products are RoHS Compliant (non-RoHS versions available)
Ferrite Beads
Piezo Diaphragms
Transducers (Buzzers)
Leaded Types
Brass, steel, and alloy versions
Continuous tone
Wide range of impedances
available
With or without flying leads
Require external drive electronics
Termination finish options: RoHS
Compliant, raditional lead based
External drive or self drive types
PCB pin and flying lead options
10 to 30mm diameters
Surface Mount Versions
Frequencies from 2KHz to
10KHz
Washable PCB case types
Axial Filter Beads
Wound Beads
From 1_ to 4_ turns
Surface Mount Types
Wide range of impedances
available
Termination finish options: RoHS
Compliant, raditional lead based
Current ratings to 9.5 Amps
Filter Bead
Common Mode Bead
High speed, high frequency and
general circuit types
Ringers & Transducers
(Buzzers)
Continuous tone
Require external drive electronics
2 and 3 connection versions
Side aperture versions
Frequencies : 1953Hz through
to 3100Hz
SPL : up to 98dB at 10cm
Rated Voltage :
1.5V
5V
6V
12V
PCB pin and flying lead options
Washable PCB case types
Square wave, 1/2 duty
Bead Arrays
Frequencies : 0.8KHz through to
4.8KHz
Available in package sizes from
0402 to 1812
SPL : up to 95dB at 30cm
Buzzers/Sounders
Rated Voltage : 12Vp-p
Continuous tone
Max Voltage : 30Vp-p
Built in driving circuit
Voltage on 3 pin type : 9VDC,
12VDC, and 30VDC
PCB pin and flying lead options
Ringers & Transducers
(Buzzers)
Frequencies : 400Hz through to
3100Hz
Continuous, slow pulse, fast
pulse, and mixed tones
SPL : up to 85dB at 10cm
Cable Clamps
Split Types for Round
Cable
Cable diameters from 3 to 27mm
Flat types
Cable widths from 6.5mm to 65m
Cylindrical Types
Internal diameters from 0.8mm to
36mm
External diameters from 2.5mm to
61.4mm
Built in driving circuit
Washable PCB case types
Rated Voltage :
PCB pin, flying lead and panel
mount options
1.8VDC
3VDC
5VDC
9VDC
12VDC
Materials
Washable PCB case types
Effective EMI suppression over a
wide frequency range - 10MHz to
3GHz
Frequencies : 2.0KHz through to
Sirens available on request
4.0KHz
Custom potential on all
SPL : up to 105dB at 30cm
audible technologies
Rated DC Voltage :
3VDC
6VDC
9VDC
12VDC
24VDC
AC type voltages :
12VAC
110VAC
220VAC
230VAC
Flexible Ferrite
Absorbent Tubing
Internal diameter from 1.8mm to
10mm
External diameter from 2.9mm to
14mm
Flexible Ferrite
Absorbent Material
Sheet thicknesses from 0.25mm to
2.5mm
Sheet sizes from 100mm x 100mm
to 400mm x 400mm
D Sub Connector Ferrite
Plates
9 way to 37 way options
Products are RoHS Compliant
MidasBrochure.qxd
21/10/09
12:04
Page 2
Ultrasonic Products
Sensors
Prowave Sanwa
B-Star
Piezo and Electrostatic
Technologies
Wide and Narrow
Beam Versions
Open Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
10mm
32.8KHz
12mm
40KHz
16mm
50KHz
18mm
24mm
Aluminium or plastic case
versions
Mirror Bender mounted pair
Enclosed Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
8mm
32.8KHz
18mm
40KHz
25mm
Aluminium cases
Open Pulse Transit
(Sonar) Type
Frequencies:
Diameters:
40KHz
16mm
Aluminium or plastic case
versions
Enclosed Pulse Transit
Types
Frequencies:
Diameters:
40KHz
8mm
48KHz
9.3mm
80KHz
13mm
125KHz
18mm
200KHz
25mm
235KHz
36.5mm
320KHz
Aluminium cases, various seals
Asymmetrical beam type
Temperature Compensated types
Underwater Sonar
Type
Frequencies:
Diameters:
200KHz
45mm
Sealed case assembly with cable
and connector
Opto Electronics
Accessories &
Transducers
Monochrome
LCD Character
Monochrome
LCD Graphic
TFT LCD
VFD
Prowave
Batron Everbouquet
Fordata Midas
Optrex
Batron Everbouquet
Fordata Midas
Optrex
Batron
Everbouquet
Optrex
Zhejiang BOE
Sensor
Accessories
1 x 8 9mm, 13mm 15mm C.H.
2 x 8 3mm, 5mm C.H.
1 x 10 8mm C.H.
1 x 16 5mm, 6mm, 8mm, 9mm,
Matching Transformers
11mm, 14mm C.H.
Step up 10:1, various Qs
1 x 20 9mm, 12mm C.H.
2 x 16 3mm, 4mm, 5mm, 8mm,
Tuner Crystals
9mm, C.H.
40KHz type
2 x 20 3mm, 5mm, 8mm, 9mm,
12mm C.H.
Ranging ICs
2 x 24 5mm C.H.
For driving sonar type
2 x 40 3mm, 5mm, 8mm C.H.
transducers
4 x 16 5mm, C.H.
4 x 20 5mm, 8mm, 9mm,
Development Ranging
12mm,
Modules
4 x 40 5mm, 8mm C.H.
Will drive most pulse transit types
6 x 20 5mm C.H.
Rubber Sleeves
For added protection
Reversing Module Kits
40KHz, 0.3-1.5m, cased.
With connector
Chip on Board (COB)
Chip on Glass (COG)
TN, STN, FSTN
Reflective, Transflective
Logic Supply: 3v, 3.3v or 5v
Chip on Board (COB)
80 x 16
84 x 32
96 x 16
100 x 32
100 x 64
120 x 32
122 x 32
128 x 64
128 x 128
138 x 110
160 x 32 (Chinese Char. Set)
160 x 128
160 x 140
192 x 32 (Chinese Char. Set)
200 x 16
200 x 32
240 x 64
240 x 128
256 x 64
320 x 240
640 x 200
640 x 240
640 x 480
Chip on Glass (COG)
Interface
Parallel/Serial
96 x 40
160 x 128
Low Profile Bezel Options 4.5mm 120 x 32
240 x 64
COG 5.5mm, 6.4mm, 7mm,
128 x 32
240 x 320
7.8mm, 8.9mm, 9.5mm COB
128 x 128
320 x 240
with LED Backlights
132 x 33
(I2C)
Transducers
PVDF type Omni
Directional Sensors
Frequencies:
Diameters:
40KHz
4.9mm
77KHz
11mm
Polyvinylidene fluoride open
construction
Immersion Atomiser
1.65MHz, 25mm diameter
Up to 400cc/hr
Micro-Nozzle Atomiser
135KHz, non-immersible, low
power
Piezo Electric Film
Sensor
PVF2 sheet to sense vibration,
motion, impact, pressure etc
Bolt Clamped High
Power Transducers
For ultrasonic cleaning, welding,
etc
28.2KHz types
40KHz types
Products are RoHS Compliant
30 Micron Dot Gap
TN, STN, FSTN
15 Micron Dot Gap for
'smoother' character
appearance.
Reflective, Transflective
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
LED Backlight Options Yellowgreen, White, Blue, Red, Amber,
Orange
Font Set Options:
English/Japanese (standard)
English/European
English/Cyrillic
Others available
Logic Supply: 3v, 3.3v or 5v
Parallel/Serial (I2C) Interface
30 Micron Dot Gap
10 and 15 Micron Dot Gap for
'smoother' character
appearance.
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
1.5” (128 x 128)
1.5” (176 x 132)
1.7” (128 x 160)
1.9” (176 x 220)
2.4” (240 x 320)
2.5” (480 x 234)
2.8” (240 x 320)
3.0” (240 x 400)
3.2” (240 x 320)
3.5” (240 x 320)
3.5” (320 x 240)
3.5” (480 x 234)
4.3” (480 x 272)
4.3” (800 x 480)
4.9” (320 x 96)
5.0” (800 x 480)
5.7” (320 x 240)
6.5” (640 x 480)
8.4” (640 x 480)
8.4” (1024 x 768)
9.0” (800 x 480)
10.4” (640 x 480)
10.4” (800 x 600)
12.1” (800 x 600)
12.1” (1024 x 768)
12.1” (1280 x 800)
14.1” (1280 x 800)
15.0” (1024 x 768)
17.5” (1280 x 800)
Glass Only
Analogue / Digital
Various
Transmissive
Serial / Parallel Int
Transflective
Brightness Control
Anti-Glare
Operating Temperatures
(-20…70°C)
Anti-Reflective
LED and CCFL Backlights
EMI/EMC Products
Star Burst Modules
Midas
Components
LED
Low Pass
Filters
Filtered
Connectors
Surface Mount
Filters
Power Filters
Arrays
Patch Antennas and
Assemblies / Gaskets
and Shielding
Wound
Products
Ferrites
Piezo
Magnetic
Design and
Development Services
Haw Shuenn
Stanley
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
API Delevan
Easy Magnet
Kitagawa
API Delevan
Kitagawa
Koyo
KEPO
Koyo
KEPO
Patch Antenna
Applications
Satellite based:
GPS Commercial (L1) & Military
(L2), Globalstar
Iridium, Inmarsat
Commercial based:
ISM (Industry, Scientific and
Medical), Zigbee,
Bluetooth, RFID
SM Patch Antenna
Elements
1GHz to 6GHz
Small footprint: 13mm to 50mm
square (excluding the ground plane)
Low profile: typically <8mm
Flexible: Antennas can be tuned
and optimised very easily making
prototyping quick and cost effective
Versatile: transmit and receive
circularly polarised signals and
linearly polarised signals
Omni-directional
Performance: typical gain response
from 0 dbi to 3 dbi for half-power
bandwidths of 110º.
Dual Frequency: 45mm footprint
with 2 frequencies packaged in
single component
Patch Antenna
Assemblies
Cable and connector options
“Plug and Play” complete
assemblies completely packaged in
protective radome
3-D computer modelling to
optimise antenna performance
I/O Gaskets
Flat gaskets, Waved Metal gaskets,
Fabric over foam gaskets, Woven
and non-woven options
Standard D-sub connector shapes
9, 15, 25, 37 and 50 way
Shielding effectiveness
range/performance 1MHz to 5GHz
Temperature range: -55ºC to
+125ºC
Fabric over Foam Profile Gaskets
Temperature range: -40ºC to +90ºC
Tensile strength: up to 80lb/in
Flammability rating: UL94
Shielding Tapes and
Fabrics
Wire Mesh Gaskets
Elastomer Core Mesh
Gaskets
Conductive Elastomers
RF & Power Inductors
Shielded and Unshielded
Ranges
Military operating temperature
range: -55ºC to +125ºC available
on many types
Close tolerance options to ±1% on
many ranges
Termination finish options: RoHS
Compliant, Traditional lead based,
QPL
Custom designs
Surface Mount Types
Inductance : RF : 1nH to 27mH
Power : 0.22µH to 22mH
Power types current ratings to 24
Amps
MIL spec approvals :
• RF types to MIL-PRF-83446
• Power types to MIL-PRF-27
RF : COTS equivalents
Application specific styles:
RF types : Micro-I, Wire bondable,
Low profile, Temperature stable,
High Q Air core, High SRF, Toroidal,
Multilayer ceramic
Power types : Micro-I, Low profile,
Toroids, Power chokes, Low profile
power toroids, High current power
toroids, Low loss toroids
Design kits
Leaded Types
Axial styles
RF : Inductance 0.1µH to 33mH
MIL spec approvals to MIL-PRF15305, MIL-PRF-39010 established reliability ranges to
failure rate level R, COTS
equivalents
Epoxy molded construction,
Variable types
Power : Inductance 0.22µH to
100mH, current ratings to
9.75Amps
Lead forming
Radial Styles
RF : Inductance 0.1µH to 150mH
Toroidal types, Variable types
Power : Inductance 1µH to 15mH,
current ratings to 19.9 Amps
Application specific styles:
Horizontal and vertical mount
power toroids, Filter chokes, Power
line chokes, HF switchmode power
toroids
Transformers
Surface mount and leaded
common mode versions - Low
profile types - Switchmode types
on a variety of ferrite cores.
Design Support
Dot Matrix Modules
1 x 16 Star Burst
We offer full demo
capabilities and technical
advice to assist our
customers' designs.
1 x 16 LCD Equiv.
85mm x 36mm
1 x 16 11mm C.H.
1 x 16 12.5mm C.H
1 x 16 14.7mm C.H.
Engineering
Support
2 x 16 LCD Equiv.
80mm x 36mm
85mm x 36mm
122 x 44mm
Through customer visits,
telephone, email and
internet.
1 x 20 5mm C.H.
1 x 20 9mm C.H.
2 x 20 LCD Equiv.
116 x 37
146 x 43
Semi Custom
Solutions:
2 x 20 10.5mm C.H.
Adding Connector and
Cable Assemblies to Display
Modules
2 x 40 LCD Equiv.
182mm x 33.5mm
4 x 20 5mm C.H.
4 x 20 9mm C.H.
Resistor changes
Etc...
Graphic VFD
High Power
Microwave Filters
10W / 20W / 50W / 100W
Solder-in, Press-in or Threaded
Green / Blue / White
Circuit type: C
Qualified to MIL-C-11015
Insertion Loss range:
effective filtering from
1MHz to 18GHz
High Power
1W / 3W / 5W
Red / Green / Yellow / Blue /
White
High Power for IR
Reflow
Custom Display
Modules
Custom VFD at only 500 MOQ
Design support and
manufacture of display
modules to meet customers
exact requirement
Capacitance: up to 30nF
Rated voltage: up to
200VDC, 115VAC, 400Hz
Current rating: 5 Amps
Temperature range: -55ºC to
+125ºC.
1W 3W
Red / Green / Yellow / Blue /
White / R.G.B.
Resin Seal Filters
Solder-in or Threaded
Laser
Circuit type: C, L, Pi
TO-18 / TO-5 / Module
Qualified to MIL-F-15733
Insertion Loss range: effective
filtering from 1MHz to 18GHz
SMD
1210 / 1206 / 1204 / 0805 /
0603
Various lens types
Wide
Capacitance: up to 1.4uF
Rated voltage: up to
2500VDC, 240VAC, 400Hz
Various colours
Current rating: up to
100 Amps
Leaded
Temperature range: -55ºC to
+125ºC
Various types
Custom options.
Various colours
High Brightness Backlights (up to
1500 cd/m2)
Infrared
Hermetically Sealed
Filters
Wave length
Wide range of thread sizes
Wide Viewing Angles
940 / 880 / 875 / 850 /
nm
Touch-Screen Options
Plug and Play Solutions
Driver Card and Interface
Solutions
LED Backlight Options: R.G.B.
Yellow-Green, White, Blue, Red,
Amber, Orange
Full Custom
Solutions
Design and manufacture of
front panel to include
Display, Buzzer, LED's, Key
Pads
Etc...
770
Circuit type: C, L, Pi, transient
suppression Pi, T and TT
Qualified to MIL-F-15733,
MIL-C-28861 and DSCC 84084
Photodiode
Phototransistors
Receiver Modules
Insertion Loss range: effective
filtering from 30kHz to 18GHz
Capacitance: up to 5.2uF
Rated voltage: up to
400VDC, 240VAC, 400Hz
Current rating: up to 30 Amps
Sizes and variants added all the time
Products are RoHS Compliant
Audible Devices
Temperature range: 55ºC to +125ºC
Custom options.
Filtered D-Subminiature
Connectors and
Adaptors
Ferrite
Chip Cap
Low Profile
High Performance
High Density
Circuit type: Ferrite, C, Pi
Number of lines: 9, 15, 25, 37
and 50 Standard density; 15, 26,
44, 62 and 78 High density
Wide range of connecting and
mounting options
Insertion Loss range: 1MHz to
18GHz
Rated voltage: 500VDC to
1000VDC
Current rating: 5 Amps.
Filtered D-Subminiature
Combo Connectors
Signal and power pins in
standard D sub shell sizes
Wide range of configurations and
mounting options
Circuit type: C
Insertion Loss range: 1MHz to
18GHz
Current rating:
Signal 5 Amps,
Power 40 Amps
Filtered & ESD
Protection Datacom
Connectors
Modular Jack
Mini Din
Miniature Ribbon
USB
Ferrite and Capacitive filtering
Insertion Loss range: 1MHz to
18GHz
Current rating: 5 Amps
Circular Connectors
Tubular and planar filtered arrays
using
C, Pi, LC and T circuits
MIL qualified
Insertion Loss range: 1MHz to
18GHz
Rated voltage: up to
1000VDC, 125VAC, 400Hz
Custom options.
Power SM Filters
Square SM Filters
Round SM Filters
Mini SM Filters
Circuit type: C, Pi
High Current Feedthru
Filters
Filtered Terminal
Blocks
Bolt-in style
Barrier Strip
Insertion Loss range:
AC: 1MHz to 1GHz
DC: 150kHz to 10GHz
2 to 6 terminals
Circuit type: Pi
Capacitance: 4.7µF max
Insertion Loss range: effective
filtering from 1MHz to 18GHz in a Rated voltage: up to 1000VDC
shielded application
and 240VAC
Approvals:
UL recognised
CSA approved
Capacitance: 68pF to 0.01µF
Current rating: up to 500 Amps
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Rated voltage: up to 200VDC
Custom options
Capacitance: 2500pF to 5200pF
Current rating: up to 20 Amps
Power Entry Modules
Rated voltage: 250VAC
Bolt-in rear terminals
Bolt-in right angle terminals
High Frequency Bolt-in with
solder lugs
Snap-in with wire leads
Current rating: 20 Amps
0603
0805
1205
1806
Switched and fused
PCB Mount
Approvals:
2 to 12 terminals
Circuit type: C
Insertion Loss range: effective
filtering from 1MHz to 18GHz
Temperature range: -55ºC to
+125ºC
Three Terminal Chip
Filters
Capacitance: up to 0.22µF
Current rating: up to 2 Amps
LC Filters
0603
0805
1206
Rated voltage: 25VDC
DC Capacitance: 2500pF
Current rating: 12 Amps
Temperature range: -40ºC to
+80ºC
Power Line and 3
Phase Power Line
LZ Filters
Approvals:
0402
0603
Band stop filter
Centre frequency range: 10MHz
to 2GHz
Rated voltage: 100VDC
Temperature range: -25ºC to
+85ºC
Temperature range: -40ºC to
+85ºC
SM Filter Arrays
Mini SM Power Filters
Miniature PCB Power Filters
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Current rating: up to 15 Amps
Fast-on or bolt-in terminals or
wire leads
Single and dual stage
Plastic and metal cases
Current rating: 100mA
Also available:
Circuit type: Pi
Low leakage current versions for
medical applications
Cut-off frequency: up to 220MHz
Current rating: up to 100mA
Termination options
UL recognised
CSA certified
TÜV approved
Rated voltage:
to 250VAC 60Hz
Rated voltage: up to 100VDC
Temperature range: -55ºC to
+105ºC
UL recognised
CSA certified
TÜV approved
5mm or 5.08mm pin spacing
Filter Plates
Bolt-in, Easy Mate®, Shrouded
Latch
Circuit type: C, Pi
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Capacitance: C type: 68pF to
4000pF
Insertion Loss range: effective
filtering from 30kHz to 30MHz
Pi type: 68pF to 5000pF
Rated voltage:
48VDC to 250VAC 60Hz
250VAC to 440VAC (3 phase)
Current rating: up to 5 Amps
Current rating:
1 Amp to 100 Amps
3 Amps to 200 Amps (3 phase)
Standard or high density options
Temperature range:
-25ºC to +85ºC
-40ºC to +85ºC (3 phase)
Single or double row options
Voltage rating: up to 250VDC
Temperature range: -55ºC to
+125ºC
Termination options
Products are RoHS Compliant (non-RoHS versions available)
Ferrite Beads
Piezo Diaphragms
Transducers (Buzzers)
Leaded Types
Brass, steel, and alloy versions
Continuous tone
Wide range of impedances
available
With or without flying leads
Require external drive electronics
Termination finish options: RoHS
Compliant, raditional lead based
External drive or self drive types
PCB pin and flying lead options
10 to 30mm diameters
Surface Mount Versions
Frequencies from 2KHz to
10KHz
Washable PCB case types
Axial Filter Beads
Wound Beads
From 1_ to 4_ turns
Surface Mount Types
Wide range of impedances
available
Termination finish options: RoHS
Compliant, raditional lead based
Current ratings to 9.5 Amps
Filter Bead
Common Mode Bead
High speed, high frequency and
general circuit types
Ringers & Transducers
(Buzzers)
Continuous tone
Require external drive electronics
2 and 3 connection versions
Side aperture versions
Frequencies : 1953Hz through
to 3100Hz
SPL : up to 98dB at 10cm
Rated Voltage :
1.5V
5V
6V
12V
PCB pin and flying lead options
Washable PCB case types
Square wave, 1/2 duty
Bead Arrays
Frequencies : 0.8KHz through to
4.8KHz
Available in package sizes from
0402 to 1812
SPL : up to 95dB at 30cm
Buzzers/Sounders
Rated Voltage : 12Vp-p
Continuous tone
Max Voltage : 30Vp-p
Built in driving circuit
Voltage on 3 pin type : 9VDC,
12VDC, and 30VDC
PCB pin and flying lead options
Ringers & Transducers
(Buzzers)
Frequencies : 400Hz through to
3100Hz
Continuous, slow pulse, fast
pulse, and mixed tones
SPL : up to 85dB at 10cm
Cable Clamps
Split Types for Round
Cable
Cable diameters from 3 to 27mm
Flat types
Cable widths from 6.5mm to 65m
Cylindrical Types
Internal diameters from 0.8mm to
36mm
External diameters from 2.5mm to
61.4mm
Built in driving circuit
Washable PCB case types
Rated Voltage :
PCB pin, flying lead and panel
mount options
1.8VDC
3VDC
5VDC
9VDC
12VDC
Materials
Washable PCB case types
Effective EMI suppression over a
wide frequency range - 10MHz to
3GHz
Frequencies : 2.0KHz through to
Sirens available on request
4.0KHz
Custom potential on all
SPL : up to 105dB at 30cm
audible technologies
Rated DC Voltage :
3VDC
6VDC
9VDC
12VDC
24VDC
AC type voltages :
12VAC
110VAC
220VAC
230VAC
Flexible Ferrite
Absorbent Tubing
Internal diameter from 1.8mm to
10mm
External diameter from 2.9mm to
14mm
Flexible Ferrite
Absorbent Material
Sheet thicknesses from 0.25mm to
2.5mm
Sheet sizes from 100mm x 100mm
to 400mm x 400mm
D Sub Connector Ferrite
Plates
9 way to 37 way options
Products are RoHS Compliant
MidasBrochure.qxd
21/10/09
12:04
Page 2
Ultrasonic Products
Sensors
Prowave Sanwa
B-Star
Piezo and Electrostatic
Technologies
Wide and Narrow
Beam Versions
Open Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
10mm
32.8KHz
12mm
40KHz
16mm
50KHz
18mm
24mm
Aluminium or plastic case
versions
Mirror Bender mounted pair
Enclosed Type
Transmitters and
Receivers
Frequencies:
Diameters:
25KHz
8mm
32.8KHz
18mm
40KHz
25mm
Aluminium cases
Open Pulse Transit
(Sonar) Type
Frequencies:
Diameters:
40KHz
16mm
Aluminium or plastic case
versions
Enclosed Pulse Transit
Types
Frequencies:
Diameters:
40KHz
8mm
48KHz
9.3mm
80KHz
13mm
125KHz
18mm
200KHz
25mm
235KHz
36.5mm
320KHz
Aluminium cases, various seals
Asymmetrical beam type
Temperature Compensated types
Underwater Sonar
Type
Frequencies:
Diameters:
200KHz
45mm
Sealed case assembly with cable
and connector
Opto Electronics
Accessories &
Transducers
Monochrome
LCD Character
Monochrome
LCD Graphic
TFT LCD
VFD
Prowave
Batron Everbouquet
Fordata Midas
Optrex
Batron Everbouquet
Fordata Midas
Optrex
Batron
Everbouquet
Optrex
Zhejiang BOE
Sensor
Accessories
1 x 8 9mm, 13mm 15mm C.H.
2 x 8 3mm, 5mm C.H.
1 x 10 8mm C.H.
1 x 16 5mm, 6mm, 8mm, 9mm,
Matching Transformers
11mm, 14mm C.H.
Step up 10:1, various Qs
1 x 20 9mm, 12mm C.H.
2 x 16 3mm, 4mm, 5mm, 8mm,
Tuner Crystals
9mm, C.H.
40KHz type
2 x 20 3mm, 5mm, 8mm, 9mm,
12mm C.H.
Ranging ICs
2 x 24 5mm C.H.
For driving sonar type
2 x 40 3mm, 5mm, 8mm C.H.
transducers
4 x 16 5mm, C.H.
4 x 20 5mm, 8mm, 9mm,
Development Ranging
12mm,
Modules
4 x 40 5mm, 8mm C.H.
Will drive most pulse transit types
6 x 20 5mm C.H.
Rubber Sleeves
For added protection
Reversing Module Kits
40KHz, 0.3-1.5m, cased.
With connector
Chip on Board (COB)
Chip on Glass (COG)
TN, STN, FSTN
Reflective, Transflective
Logic Supply: 3v, 3.3v or 5v
Chip on Board (COB)
80 x 16
84 x 32
96 x 16
100 x 32
100 x 64
120 x 32
122 x 32
128 x 64
128 x 128
138 x 110
160 x 32 (Chinese Char. Set)
160 x 128
160 x 140
192 x 32 (Chinese Char. Set)
200 x 16
200 x 32
240 x 64
240 x 128
256 x 64
320 x 240
640 x 200
640 x 240
640 x 480
Chip on Glass (COG)
Interface
Parallel/Serial
96 x 40
160 x 128
Low Profile Bezel Options 4.5mm 120 x 32
240 x 64
COG 5.5mm, 6.4mm, 7mm,
128 x 32
240 x 320
7.8mm, 8.9mm, 9.5mm COB
128 x 128
320 x 240
with LED Backlights
132 x 33
(I2C)
Transducers
PVDF type Omni
Directional Sensors
Frequencies:
Diameters:
40KHz
4.9mm
77KHz
11mm
Polyvinylidene fluoride open
construction
Immersion Atomiser
1.65MHz, 25mm diameter
Up to 400cc/hr
Micro-Nozzle Atomiser
135KHz, non-immersible, low
power
Piezo Electric Film
Sensor
PVF2 sheet to sense vibration,
motion, impact, pressure etc
Bolt Clamped High
Power Transducers
For ultrasonic cleaning, welding,
etc
28.2KHz types
40KHz types
Products are RoHS Compliant
30 Micron Dot Gap
TN, STN, FSTN
15 Micron Dot Gap for
'smoother' character
appearance.
Reflective, Transflective
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
LED Backlight Options Yellowgreen, White, Blue, Red, Amber,
Orange
Font Set Options:
English/Japanese (standard)
English/European
English/Cyrillic
Others available
Logic Supply: 3v, 3.3v or 5v
Parallel/Serial (I2C) Interface
30 Micron Dot Gap
10 and 15 Micron Dot Gap for
'smoother' character
appearance.
Operating Temperatures:
Standard (0…+50°C)
Wide (-20…70°C)
Positive Mode Dark characters
on a light background
Negative Mode Light characters
on a dark ground
1.5” (128 x 128)
1.5” (176 x 132)
1.7” (128 x 160)
1.9” (176 x 220)
2.4” (240 x 320)
2.5” (480 x 234)
2.8” (240 x 320)
3.0” (240 x 400)
3.2” (240 x 320)
3.5” (240 x 320)
3.5” (320 x 240)
3.5” (480 x 234)
4.3” (480 x 272)
4.3” (800 x 480)
4.9” (320 x 96)
5.0” (800 x 480)
5.7” (320 x 240)
6.5” (640 x 480)
8.4” (640 x 480)
8.4” (1024 x 768)
9.0” (800 x 480)
10.4” (640 x 480)
10.4” (800 x 600)
12.1” (800 x 600)
12.1” (1024 x 768)
12.1” (1280 x 800)
14.1” (1280 x 800)
15.0” (1024 x 768)
17.5” (1280 x 800)
Glass Only
Analogue / Digital
Various
Transmissive
Serial / Parallel Int
Transflective
Brightness Control
Anti-Glare
Operating Temperatures
(-20…70°C)
Anti-Reflective
LED and CCFL Backlights
EMI/EMC Products
Star Burst Modules
Midas
Components
LED
Low Pass
Filters
Filtered
Connectors
Surface Mount
Filters
Power Filters
Arrays
Patch Antennas and
Assemblies / Gaskets
and Shielding
Wound
Products
Ferrites
Piezo
Magnetic
Design and
Development Services
Haw Shuenn
Stanley
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
Spectrum
Control
API Delevan
Easy Magnet
Kitagawa
API Delevan
Kitagawa
Koyo
KEPO
Koyo
KEPO
Patch Antenna
Applications
Satellite based:
GPS Commercial (L1) & Military
(L2), Globalstar
Iridium, Inmarsat
Commercial based:
ISM (Industry, Scientific and
Medical), Zigbee,
Bluetooth, RFID
SM Patch Antenna
Elements
1GHz to 6GHz
Small footprint: 13mm to 50mm
square (excluding the ground plane)
Low profile: typically <8mm
Flexible: Antennas can be tuned
and optimised very easily making
prototyping quick and cost effective
Versatile: transmit and receive
circularly polarised signals and
linearly polarised signals
Omni-directional
Performance: typical gain response
from 0 dbi to 3 dbi for half-power
bandwidths of 110º.
Dual Frequency: 45mm footprint
with 2 frequencies packaged in
single component
Patch Antenna
Assemblies
Cable and connector options
“Plug and Play” complete
assemblies completely packaged in
protective radome
3-D computer modelling to
optimise antenna performance
I/O Gaskets
Flat gaskets, Waved Metal gaskets,
Fabric over foam gaskets, Woven
and non-woven options
Standard D-sub connector shapes
9, 15, 25, 37 and 50 way
Shielding effectiveness
range/performance 1MHz to 5GHz
Temperature range: -55ºC to
+125ºC
Fabric over Foam Profile Gaskets
Temperature range: -40ºC to +90ºC
Tensile strength: up to 80lb/in
Flammability rating: UL94
Shielding Tapes and
Fabrics
Wire Mesh Gaskets
Elastomer Core Mesh
Gaskets
Conductive Elastomers
RF & Power Inductors
Shielded and Unshielded
Ranges
Military operating temperature
range: -55ºC to +125ºC available
on many types
Close tolerance options to ±1% on
many ranges
Termination finish options: RoHS
Compliant, Traditional lead based,
QPL
Custom designs
Surface Mount Types
Inductance : RF : 1nH to 27mH
Power : 0.22µH to 22mH
Power types current ratings to 24
Amps
MIL spec approvals :
• RF types to MIL-PRF-83446
• Power types to MIL-PRF-27
RF : COTS equivalents
Application specific styles:
RF types : Micro-I, Wire bondable,
Low profile, Temperature stable,
High Q Air core, High SRF, Toroidal,
Multilayer ceramic
Power types : Micro-I, Low profile,
Toroids, Power chokes, Low profile
power toroids, High current power
toroids, Low loss toroids
Design kits
Leaded Types
Axial styles
RF : Inductance 0.1µH to 33mH
MIL spec approvals to MIL-PRF15305, MIL-PRF-39010 established reliability ranges to
failure rate level R, COTS
equivalents
Epoxy molded construction,
Variable types
Power : Inductance 0.22µH to
100mH, current ratings to
9.75Amps
Lead forming
Radial Styles
RF : Inductance 0.1µH to 150mH
Toroidal types, Variable types
Power : Inductance 1µH to 15mH,
current ratings to 19.9 Amps
Application specific styles:
Horizontal and vertical mount
power toroids, Filter chokes, Power
line chokes, HF switchmode power
toroids
Transformers
Surface mount and leaded
common mode versions - Low
profile types - Switchmode types
on a variety of ferrite cores.
Design Support
Dot Matrix Modules
1 x 16 Star Burst
We offer full demo
capabilities and technical
advice to assist our
customers' designs.
1 x 16 LCD Equiv.
85mm x 36mm
1 x 16 11mm C.H.
1 x 16 12.5mm C.H
1 x 16 14.7mm C.H.
Engineering
Support
2 x 16 LCD Equiv.
80mm x 36mm
85mm x 36mm
122 x 44mm
Through customer visits,
telephone, email and
internet.
1 x 20 5mm C.H.
1 x 20 9mm C.H.
2 x 20 LCD Equiv.
116 x 37
146 x 43
Semi Custom
Solutions:
2 x 20 10.5mm C.H.
Adding Connector and
Cable Assemblies to Display
Modules
2 x 40 LCD Equiv.
182mm x 33.5mm
4 x 20 5mm C.H.
4 x 20 9mm C.H.
Resistor changes
Etc...
Graphic VFD
High Power
Microwave Filters
10W / 20W / 50W / 100W
Solder-in, Press-in or Threaded
Green / Blue / White
Circuit type: C
Qualified to MIL-C-11015
Insertion Loss range:
effective filtering from
1MHz to 18GHz
High Power
1W / 3W / 5W
Red / Green / Yellow / Blue /
White
High Power for IR
Reflow
Custom Display
Modules
Custom VFD at only 500 MOQ
Design support and
manufacture of display
modules to meet customers
exact requirement
Capacitance: up to 30nF
Rated voltage: up to
200VDC, 115VAC, 400Hz
Current rating: 5 Amps
Temperature range: -55ºC to
+125ºC.
1W 3W
Red / Green / Yellow / Blue /
White / R.G.B.
Resin Seal Filters
Solder-in or Threaded
Laser
Circuit type: C, L, Pi
TO-18 / TO-5 / Module
Qualified to MIL-F-15733
Insertion Loss range: effective
filtering from 1MHz to 18GHz
SMD
1210 / 1206 / 1204 / 0805 /
0603
Various lens types
Wide
Capacitance: up to 1.4uF
Rated voltage: up to
2500VDC, 240VAC, 400Hz
Various colours
Current rating: up to
100 Amps
Leaded
Temperature range: -55ºC to
+125ºC
Various types
Custom options.
Various colours
High Brightness Backlights (up to
1500 cd/m2)
Infrared
Hermetically Sealed
Filters
Wave length
Wide range of thread sizes
Wide Viewing Angles
940 / 880 / 875 / 850 /
nm
Touch-Screen Options
Plug and Play Solutions
Driver Card and Interface
Solutions
LED Backlight Options: R.G.B.
Yellow-Green, White, Blue, Red,
Amber, Orange
Full Custom
Solutions
Design and manufacture of
front panel to include
Display, Buzzer, LED's, Key
Pads
Etc...
770
Circuit type: C, L, Pi, transient
suppression Pi, T and TT
Qualified to MIL-F-15733,
MIL-C-28861 and DSCC 84084
Photodiode
Phototransistors
Receiver Modules
Insertion Loss range: effective
filtering from 30kHz to 18GHz
Capacitance: up to 5.2uF
Rated voltage: up to
400VDC, 240VAC, 400Hz
Current rating: up to 30 Amps
Sizes and variants added all the time
Products are RoHS Compliant
Audible Devices
Temperature range: 55ºC to +125ºC
Custom options.
Filtered D-Subminiature
Connectors and
Adaptors
Ferrite
Chip Cap
Low Profile
High Performance
High Density
Circuit type: Ferrite, C, Pi
Number of lines: 9, 15, 25, 37
and 50 Standard density; 15, 26,
44, 62 and 78 High density
Wide range of connecting and
mounting options
Insertion Loss range: 1MHz to
18GHz
Rated voltage: 500VDC to
1000VDC
Current rating: 5 Amps.
Filtered D-Subminiature
Combo Connectors
Signal and power pins in
standard D sub shell sizes
Wide range of configurations and
mounting options
Circuit type: C
Insertion Loss range: 1MHz to
18GHz
Current rating:
Signal 5 Amps,
Power 40 Amps
Filtered & ESD
Protection Datacom
Connectors
Modular Jack
Mini Din
Miniature Ribbon
USB
Ferrite and Capacitive filtering
Insertion Loss range: 1MHz to
18GHz
Current rating: 5 Amps
Circular Connectors
Tubular and planar filtered arrays
using
C, Pi, LC and T circuits
MIL qualified
Insertion Loss range: 1MHz to
18GHz
Rated voltage: up to
1000VDC, 125VAC, 400Hz
Custom options.
Power SM Filters
Square SM Filters
Round SM Filters
Mini SM Filters
Circuit type: C, Pi
High Current Feedthru
Filters
Filtered Terminal
Blocks
Bolt-in style
Barrier Strip
Insertion Loss range:
AC: 1MHz to 1GHz
DC: 150kHz to 10GHz
2 to 6 terminals
Circuit type: Pi
Capacitance: 4.7µF max
Insertion Loss range: effective
filtering from 1MHz to 18GHz in a Rated voltage: up to 1000VDC
shielded application
and 240VAC
Approvals:
UL recognised
CSA approved
Capacitance: 68pF to 0.01µF
Current rating: up to 500 Amps
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Rated voltage: up to 200VDC
Custom options
Capacitance: 2500pF to 5200pF
Current rating: up to 20 Amps
Power Entry Modules
Rated voltage: 250VAC
Bolt-in rear terminals
Bolt-in right angle terminals
High Frequency Bolt-in with
solder lugs
Snap-in with wire leads
Current rating: 20 Amps
0603
0805
1205
1806
Switched and fused
PCB Mount
Approvals:
2 to 12 terminals
Circuit type: C
Insertion Loss range: effective
filtering from 1MHz to 18GHz
Temperature range: -55ºC to
+125ºC
Three Terminal Chip
Filters
Capacitance: up to 0.22µF
Current rating: up to 2 Amps
LC Filters
0603
0805
1206
Rated voltage: 25VDC
DC Capacitance: 2500pF
Current rating: 12 Amps
Temperature range: -40ºC to
+80ºC
Power Line and 3
Phase Power Line
LZ Filters
Approvals:
0402
0603
Band stop filter
Centre frequency range: 10MHz
to 2GHz
Rated voltage: 100VDC
Temperature range: -25ºC to
+85ºC
Temperature range: -40ºC to
+85ºC
SM Filter Arrays
Mini SM Power Filters
Miniature PCB Power Filters
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Current rating: up to 15 Amps
Fast-on or bolt-in terminals or
wire leads
Single and dual stage
Plastic and metal cases
Current rating: 100mA
Also available:
Circuit type: Pi
Low leakage current versions for
medical applications
Cut-off frequency: up to 220MHz
Current rating: up to 100mA
Termination options
UL recognised
CSA certified
TÜV approved
Rated voltage:
to 250VAC 60Hz
Rated voltage: up to 100VDC
Temperature range: -55ºC to
+105ºC
UL recognised
CSA certified
TÜV approved
5mm or 5.08mm pin spacing
Filter Plates
Bolt-in, Easy Mate®, Shrouded
Latch
Circuit type: C, Pi
Insertion Loss range: effective
filtering from 1MHz to 18GHz
with proper installation
Capacitance: C type: 68pF to
4000pF
Insertion Loss range: effective
filtering from 30kHz to 30MHz
Pi type: 68pF to 5000pF
Rated voltage:
48VDC to 250VAC 60Hz
250VAC to 440VAC (3 phase)
Current rating: up to 5 Amps
Current rating:
1 Amp to 100 Amps
3 Amps to 200 Amps (3 phase)
Standard or high density options
Temperature range:
-25ºC to +85ºC
-40ºC to +85ºC (3 phase)
Single or double row options
Voltage rating: up to 250VDC
Temperature range: -55ºC to
+125ºC
Termination options
Products are RoHS Compliant (non-RoHS versions available)
Ferrite Beads
Piezo Diaphragms
Transducers (Buzzers)
Leaded Types
Brass, steel, and alloy versions
Continuous tone
Wide range of impedances
available
With or without flying leads
Require external drive electronics
Termination finish options: RoHS
Compliant, raditional lead based
External drive or self drive types
PCB pin and flying lead options
10 to 30mm diameters
Surface Mount Versions
Frequencies from 2KHz to
10KHz
Washable PCB case types
Axial Filter Beads
Wound Beads
From 1_ to 4_ turns
Surface Mount Types
Wide range of impedances
available
Termination finish options: RoHS
Compliant, raditional lead based
Current ratings to 9.5 Amps
Filter Bead
Common Mode Bead
High speed, high frequency and
general circuit types
Ringers & Transducers
(Buzzers)
Continuous tone
Require external drive electronics
2 and 3 connection versions
Side aperture versions
Frequencies : 1953Hz through
to 3100Hz
SPL : up to 98dB at 10cm
Rated Voltage :
1.5V
5V
6V
12V
PCB pin and flying lead options
Washable PCB case types
Square wave, 1/2 duty
Bead Arrays
Frequencies : 0.8KHz through to
4.8KHz
Available in package sizes from
0402 to 1812
SPL : up to 95dB at 30cm
Buzzers/Sounders
Rated Voltage : 12Vp-p
Continuous tone
Max Voltage : 30Vp-p
Built in driving circuit
Voltage on 3 pin type : 9VDC,
12VDC, and 30VDC
PCB pin and flying lead options
Ringers & Transducers
(Buzzers)
Frequencies : 400Hz through to
3100Hz
Continuous, slow pulse, fast
pulse, and mixed tones
SPL : up to 85dB at 10cm
Cable Clamps
Split Types for Round
Cable
Cable diameters from 3 to 27mm
Flat types
Cable widths from 6.5mm to 65m
Cylindrical Types
Internal diameters from 0.8mm to
36mm
External diameters from 2.5mm to
61.4mm
Built in driving circuit
Washable PCB case types
Rated Voltage :
PCB pin, flying lead and panel
mount options
1.8VDC
3VDC
5VDC
9VDC
12VDC
Materials
Washable PCB case types
Effective EMI suppression over a
wide frequency range - 10MHz to
3GHz
Frequencies : 2.0KHz through to
Sirens available on request
4.0KHz
Custom potential on all
SPL : up to 105dB at 30cm
audible technologies
Rated DC Voltage :
3VDC
6VDC
9VDC
12VDC
24VDC
AC type voltages :
12VAC
110VAC
220VAC
230VAC
Flexible Ferrite
Absorbent Tubing
Internal diameter from 1.8mm to
10mm
External diameter from 2.9mm to
14mm
Flexible Ferrite
Absorbent Material
Sheet thicknesses from 0.25mm to
2.5mm
Sheet sizes from 100mm x 100mm
to 400mm x 400mm
D Sub Connector Ferrite
Plates
9 way to 37 way options
Products are RoHS Compliant
MidasBrochure.qxd
21/10/09
12:04
Page 1
From Design Concept to Final Product Fruition
TFT / Graphic
LCD
Character LCD
LED’s
Ultrasonic
Sensor
Audible
Devices
Inductors /
Chokes
SMD Filter
Chips
Low Pass
Feed-Thru Filters
The Specialist Electronics Components Distributor
Supporting Customers from
Design Concept to Full Production
Audible Devices
Specialist Electronics Components Distributor
■
■
■
■
Opto Electronics
In August 2009 Midas
Components Limited
entered its 10th year of
servicing customers from
design concept through to
production and onto
obsolescence
management.
Audible Products
Displays
EMC / EMI
Ferrites
LED / Lamps
Ultrasonic Sensors
Wound Products
The Company specialises in
the promotion of Opto
Electronics, Audible Devices,
EMC Components, and
Ultrasonic Sensor Products.
Midas prides itself on its
engineering product
knowledge and commercial
servicing expertise.
Mains Filters
Our aim is to exceed our
customers and suppliers
expectations!
Filtered D-Sub
Connectors
Circular
Connectors
Filter Plate
CATALOGUE
Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU
Tel: 01493 602602
Fax: 01493 665111
sales@midascomponents.co.uk
www.midascomponents.co.uk
Piezo elements
Piezo and magnetic buzzers
Piezo and magnetic transducers
PCB, pinned, SMD, panel mount
SHORTFORM CATALOGUE
■
■
■
■
■
■
■
■
■
■
■
Character LCDs
Graphic LCDs
TFT LCDs
VFDs
LEDs
Accessories: cables, connectors, bezels etc
Short leadtimes
Low volume customisation
Innovative product development
Demonstration facility
Engineering and design support
Ultrasonic Products
■
■
■
■
■
■
■
■
Transmitters and Receivers
Sonar ranging transceivers
Narrow beam types
Open and enclosed versions
Ranging modules and ICs
Matching transformers
Atomisers/nebulisers
Film vibration sensors
EMI/EMC Products
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Low pass filters
Filtered connectors
Surface mount filters
Power filters
Filter plates
Filtered terminal blocks
RF inductors - leaded and SMD
Power inductors - leaded and SMD
Transformers
Ferrite beads - leaded and SMD
Ferrite cable clamps
Ferrite materials
Gaskets and Shielding products
Patch antennas and assemblies
MIL spec approvals
SHORTFORM
MidasBrochure.qxd
21/10/09
12:04
Page 1
From Design Concept to Final Product Fruition
TFT / Graphic
LCD
Character LCD
LED’s
Ultrasonic
Sensor
Audible
Devices
Inductors /
Chokes
SMD Filter
Chips
Low Pass
Feed-Thru Filters
The Specialist Electronics Components Distributor
Supporting Customers from
Design Concept to Full Production
Audible Devices
Specialist Electronics Components Distributor
■
■
■
■
Opto Electronics
In August 2009 Midas
Components Limited
entered its 10th year of
servicing customers from
design concept through to
production and onto
obsolescence
management.
Audible Products
Displays
EMC / EMI
Ferrites
LED / Lamps
Ultrasonic Sensors
Wound Products
The Company specialises in
the promotion of Opto
Electronics, Audible Devices,
EMC Components, and
Ultrasonic Sensor Products.
Midas prides itself on its
engineering product
knowledge and commercial
servicing expertise.
Mains Filters
Our aim is to exceed our
customers and suppliers
expectations!
Filtered D-Sub
Connectors
Circular
Connectors
Filter Plate
CATALOGUE
Electra House 32 Southtown Road Great Yarmouth Norfolk NR31 0DU
Tel: 01493 602602
Fax: 01493 665111
sales@midascomponents.co.uk
www.midascomponents.co.uk
Piezo elements
Piezo and magnetic buzzers
Piezo and magnetic transducers
PCB, pinned, SMD, panel mount
SHORTFORM CATALOGUE
■
■
■
■
■
■
■
■
■
■
■
Character LCDs
Graphic LCDs
TFT LCDs
VFDs
LEDs
Accessories: cables, connectors, bezels etc
Short leadtimes
Low volume customisation
Innovative product development
Demonstration facility
Engineering and design support
Ultrasonic Products
■
■
■
■
■
■
■
■
Transmitters and Receivers
Sonar ranging transceivers
Narrow beam types
Open and enclosed versions
Ranging modules and ICs
Matching transformers
Atomisers/nebulisers
Film vibration sensors
EMI/EMC Products
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Low pass filters
Filtered connectors
Surface mount filters
Power filters
Filter plates
Filtered terminal blocks
RF inductors - leaded and SMD
Power inductors - leaded and SMD
Transformers
Ferrite beads - leaded and SMD
Ferrite cable clamps
Ferrite materials
Gaskets and Shielding products
Patch antennas and assemblies
MIL spec approvals
SHORTFORM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising