monster rounds catalytic slip-on mufflers big radius

monster rounds catalytic slip-on mufflers big radius
NOVEMBER 2013
1801‑0662
Shown w/ 1802-0260
MONSTER ROUNDS
CATALYTIC SLIP-ON MUFFLERS
•4” Monster Rounds Catalytic slip-on mufflers house three-way catalytic
converters that have been tested with Vance & Hines Power Duals or
Dresser Duals to demonstrate that they meet emissions standards
applicable in California
•The real benefit of combining Vance & Hines Power Duals Black or
Dresser Dual with the new Monster Round Catalytic slip-ons lies in
the movement of the catalytic converter from the rear portion of
the header system (as it is in the original equipment exhaust) to the
muffler bodies, which yields a significant reduction in heat felt
by the rider
•Make just as much power as standard Monster Round slip-ons, along
with the same deep and mellow tone riders have come to love
•Includes finely sculpted full coverage chrome or black heat shields
•Sold in pairs
•Made in the U.S.A.
MANUFACTURER’S NOTE: CARB Executive Order (E.O.) No. K-006-1.
MANUFACTURER’S NOTE: R
equires use of Vance & Hines Power Duals or
Dresser Duals headers to meet E.O. certification.
1801‑0663
Shown w/ 1802-0261
PART #
DESCRIPTION
FOR 07‑13 FLHT, FLHR, FLHX, FLTR 103”/​110” MODELS
1801‑0662
1801‑0663
SUG. RETAIL
Chrome
Black
$849.95
949.95
BIG RADIUS
•Big 21/2” full header and muffler heat shield system is
virtually blue-proof
•Black pipes feature scalloped tips for a unique look
•Removable baffles and mounting hardware included
•Flat plane mounting panel for the 12mm oxygen sensors
positions sensors deeper into exhaust stream, providing
enhanced data feedback to the ECM
•Made in the U.S.A.
PART #
DESCRIPTION
1800‑1627
For 13‑14 FXSB/SE
SUG. RETAIL
$804.95
The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter
OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local
laws and manufacturer’s information.
1800‑1611
RADIAL SWEEPERS
•Performance stepped headers with radial rear section
•Direct bolt-on design for easy installation
•Available with show-chrome or black finish
•Made in the U.S.A.
1800‑1614
NOTE: Will not fit with passenger footpegs on Dyna models.
EXHAUST SYSTEMS FOR SOFTAIL BREAKOUT, ROCKER AND SOFTAIL W/ PASSENGER PEGS (EXCEPT DYNA)
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
86‑14 FXS, FXST, FLS, FLST MODELS, 91‑14 FXD, FXDWG MODELS, 07‑11 FXCW/C
86‑14 FXS, FXST, FLS, FLST MODELS, 91‑14 FXD, FXDWG MODELS, 07‑11 FXCW/C
MODELS, 13‑14 FXSB/SE, 09‑10 CVS SPRINGER SOFTAIL MODELS
MODELS, 13‑14 FXSB/SE, 09‑10 CVS SPRINGER SOFTAIL MODELS (CONT)
1800‑16111
1800‑16121
Chrome with chrome heat shield
Black with black heat shield
$729.95
759.95
1800‑16131
1800‑16141
1Includes
Black with chrome heat shields with holes
Chrome with black heat shields with holes
$799.95
799.95
oxygen sensor plugs for non‑sensor applications.
1801‑0660
4” SLIP-ON MEGAPHONE MUFFLERS
•Slip-on mufflers feature 16-gauge steel construction, removable
flow-through baffles and show-chrome or black finish
•Bolt to stock locations with supplied hardware
•Sold in pairs
•Made in the U.S.A.
FOR 95‑14 FLT, FLHT, FLHX, FLTR, FLHR, FLHX MODELS
PART #
DESCRIPTION
WITH 21/4” STANDARD BAFFLES
1801‑0660
1801‑0661
Chrome w/ black billet end caps and contrasting flutes
Black w/ black billet end caps and contrasting flutes
1801‑0661
SUG. RETAIL
$549.95
569.95
The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter
OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local
laws and manufacturer’s information.
2
TRUE DUALS WITH 33” LONGTAIL MUFFLERS
•Headpipes are covered with 220° heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same
shielding results
•21/4” muffler bodies with integrated, removable, fuel-injection-friendly baffles
•Unique removable longtails, which are 2” longer on the bottom than standard fishtails
•Mounting brackets and hardware included
•Made in the U.S.A.
NOTE: Muffler bodies are measured from the bottom of the fishtail to the beginning of the muffler body, excluding the inlet.
PART #
DESCRIPTION
1800‑1628
For 95‑06 FXST/​FLST models
SUG. RETAIL
$899.95
The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter
OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local
laws and manufacturer’s information.
3850‑0223
3850‑0228
HARDWARE
ORGANIZERS
•Part organizers for powertrain
assembly, teardown and storage
•Specific stands for top end, transmission, cam chest, and primary
•Stands nest to save space
EXHAUST RING RETAINER TOOL
•Quickly and easily installs the exhaust pipe retaining ring on almost all
H-D exhaust systems
•Install the H-D No.65325-83A ring in seconds, without scratching the
exhaust pipe or twisting the ring
•Made in the U.S.A.
PART#
DESCRIPTION
3850‑0227
Exhaust ring retainer tool
SUG. RETAIL
$83.95
PART #
DESCRIPTION
3850‑0223
Cam chest – for cam cover, cam
support and tappet cover hardware
Primary – for inner and outer primary
cover hardware
Top end – for top end and rocker
cover hardware
Transmission – for cruise drive
transmission hardware
Complete Kit set – Four Piece hardware
organizer kit
3850‑0224
3850‑0225
3850‑0226
3850‑0228
SUG. RETAIL
$81.95
75.95
77.95
79.95
283.95
3
SADDLEMEN
As you read this, we at Drag Specialties
are putting the final touches on the 2014
FatBook™. We have busily added many new
products like the ones you see below from
our good friends at Saddlemen. Along with
stylish and comfortable new seats you will
also find innovative new luggage designs all
of which work and look great together and
are certain to improve any ride. We know you
will like what you see.
0801-0785
HEATED
EXPLORER™ SEATS
•Five-level heat adjustment
using remote controllers
that connect easily to bike’s
electrical system
•Independently controlled
heating elements for rider
and passenger
Remote
•Integrated pocket/belt clip allows controllers to be mounted
Heat
wherever handy, are easy to use even with gloved hand, and
Controller
can easily be tucked out of sight when not in use
•Brightly colored LEDs indicate level of heat
•Seat’s styling and function is unaffected by switches or wiring
•Comfortable touring design
•Low profile heated Explorer™ seats provide a lower driver’s seat position,
2” lower than a standard profile Explorer™ or original-equipment seat while
offering extraordinary lumbar support
•PART #0801-0786 includes a removable driver’s backrest which is adjustable for
both height and fore-aft position
•Supple SaddleHyde™ offers a combination of comfort, glove-soft leathery feel
and weather-resistant, no-maintenance good looks
•Exclusive, unique split-cushion design separates the seating surface from the lumbar
support, reducing tailbone and back pressure for maximum long-range comfort
•SaddleGel™ in both driver and passenger portions increases comfort even during
long trips
•PART #0801-0785 accepts H-D frame mounted drivers backrest
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 08‑13 FLHR, FLHT, FLHX, FLTR MODELS
0801‑0785
0801‑0786
SUG. RETAIL
W/o driver backrest, low profile
W/ driver backrest, low profile
RENEGADE S3 SUPER SLAMMED
SOLO SEATS
$698.95
892.95
EXPLORER™ SEAT WITH BACKREST
•Comfortable touring design
•Low-profile Explorer™ seats provide a lower driver’s
seat position, 2” lower that a standard-profile
Explorer™ or original-equipment seat while offering
extraordinary lumbar support
•Supple SaddleHyde™ offers a combination of comfort, glove-soft
leathery feel and weather-resistant, no-maintenance good looks
•Exclusive, unique split-cushion design separates the seating
surface from the lumbar support, reducing tailbone and back
pressure for maximum long-range comfort
•Includes backrest
•SaddleGel™ in both driver and passenger portions increases
comfort even during long trips
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
0801‑0784 For 08‑13 FLHR, FLHT, FLHX, FLTR models
0803‑0429
$649.95
0803‑0430
•Really low to create a stylish saddle so thin it barely covers
the bike’s battery
•The perfect seat choice for the rider alone, no passenger pillion
•The sculpting of the seat not only creates a smart style, but it gives
riders a short leg reach to the ground for confident stops
•Choose either a leather-grain SaddleHyde™ seat cover or the new
WP-Suede cover for a rich, custom look
•Both cover types offer excellent comfort with a classic feel and are
weather-resistant for low-maintenance ownership
•The progressive density foam foundation offers a surprising amount
of supportive comfort for a slammed solo seat
•Gel-coated, marine grade fiberglass pans and chrome brackets make sure the seat is durable for decades of riding
•Easy to install, just like the bike’s original seat; includes additional mounting hardware as needed
•Designed and made in the U.S.A.
PART #
FOR 06‑14 DYNA MODELS
0803‑0429
0803‑0430
4
DESCRIPTION
Leather‑gain SaddleHyde™ vinyl cover, ultra‑low solo seat
WP‑suede cover, ultra‑low solo seat
SUG. RETAIL
$229.95
229.95
0802‑0792
0821‑1613
0802‑0793
SEAT WARMER KIT WITH
HI/LOW SWITCH PANEL
•Carbon Fiber Seat Warmers
•Single includes switch panel with
power port, one seat warmer and all
wiring harnesses to connect
•Dual includes switch panel with power
port, two seat warmers and all wiring
harnesses to connect
•Independent heat control for each
seat warmer
•Single switch panel with HI/LO rocker switches
•Reverse polarity and short circuit protection
•Low voltage auto shut-off feature
•DC Direct Power port rated at 10 amps
0802‑0794
NOTE: Vehicle must have a battery to support the seat warmer.
TRACKER FENDER SOLO SEATS
•Available in two new styles: Boss and Enzo
•Works only with RSD 200mm Tracker rear fender kit
•Will not fit with stock fender or 240mm rear fender kit
•Controlled density polyurethane foam
•Marine grade fiberglass baseplate
•RSD logo tag stitched to seam
•Requires drilling one 1/4” hole in rear fender for mounting bolt
•Made in the U.S.A.
PART #
DESCRIPTION
0821‑1613
0821‑1614
Single
Dual
NOTE: W
ill fit 07-13 fuel-injected models if battery YTX15L-BS is used and
the ECM and fuel management system (if applicable) are relocated.
Boss, distressed vinyl, black
Enzo, black
Enzo, brown/​black
$149.95
199.95
0903-0949
PART #
DESCRIPTION
SUG. RETAIL
FOR 00‑13 FXST/​FLST W/ RSD TRACKER 200MM FENDER AND STRUT KIT
0802‑0792
0802‑0793
0802‑0794
SUG. RETAIL
$389.95
409.95
419.95
0631‑0116
0903-0947
HEAT DEMON GRIP WARMERS
•Kits come complete with everything needed for fast and easy installation
– four-level power controller with adjustable-intensity LEDs, two heater
inserts, hardware and wire-threading tool
•Controller replaces the clamp half of the OEM clutch or brake perch
•Work with most grips and with or without electronic throttle
•Heating unit mounts inside the handlebar
•Maximum length for wires through the bars is 55”
•Available with chrome or black finish
•Made in the U.S.A.
NOTE: Handlebars must have 7/8” i.d. to properly install.
NOTE: Not to be used with aluminum handlebars.
FOR 1” AND 11/4” BARS
PART #
CHROME
DESCRIPTION
SUG. RETAIL
0631‑0116
0631‑0118
Left‑side mount
Right‑side mount
$169.95
169.95
0631‑0115
0631‑0117
Left‑side mount
Right‑side mount
169.95
169.95
BLACK
BOLT-ON BIG BORE KITS
•Revolution™ aerospace-grade all-aluminum cylinders
with nickel-silicon-carbide electroplated bores, which means NO
SLEEVING; allows larger bore sizes and less friction for more horsepower,
lower temps and a longer lifespan
•True bolt-on kit that delivers major power with no machine
work required
•Also includes Wiseco forged pistons with rings (that are specifically
designed for optimal compatibility with Revolution Performance’s
cylinders), wrist pins, circlips and high-performance head and
base gaskets
•Available in three finishes: natural silver, black or black with
highlighted fins
•Made in the U.S.A.
PART #
DESCRIPTION
1250CC KITS FOR 09‑12 XR1200/X 3.5625” BORE CYLINDERS
10.5:1 FORGED PISTONS
0903‑0949
0903‑0947
0903‑0948
Silver
Black w/ highlighted fins
Black
SUG. RETAIL
$1,109.95
1,109.95
1,109.95
5
0803‑0427
0803‑0428
0803‑0426
CHALLENGER
SOLO SEATS
•Hand-stitched vinyl cover
•Molded polyurethane
•Available in smooth and tuck n’ roll styles
•Also available in raw foam and pan for custom upholstery
PART #
DESCRIPTION
FOR 06‑14 DYNA MODELS
0803‑0427
Vertical tuck n’ roll
SUG. RETAIL
$199.95
PART #
DESCRIPTION
FOR 06‑14 DYNA MODELS (CONT)
0803‑0428
SUG. RETAIL
Smooth
$199.95
PART #
DESCRIPTION
FOR 06‑14 DYNA MODELS (CONT)
0803‑0426
0804‑0490
0804‑0489
Uncovered
SUG. RETAIL
$129.95
0804‑0488
CAFE SEAT
•Molded polyurethane foam,
plastic pan and vinyl cover
•Hand-stitched cover
available in checkerboard
and tuck n’ roll patterns
•Chrome plated 1/8” thick
steel mounting bracket
PART #
DESCRIPTION
SUG. RETAIL
FOR 86‑03 XL MODELS W/​OEM REAR FENDER
0804‑0489
Checkerboard
$174.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 86‑03 XL MODELS W/​OEM REAR FENDER (CONT)
0804‑0490
Tuck n’ roll
$174.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 86‑03 XL MODELS W/​OEM REAR FENDER (CONT)
0804‑0488
Uncovered
$119.95
0806‑0081
0806‑0080
0806‑0079
THINLINE SEATS
•Stamped steel pan with reinforcement ribs and black electroplated finish
•Carriage bolts on the bottom of seats slide inside two channels so they can be fine-tuned in their
location relative to the bungs on the frame
•Molded polyurethane foam with hand-stitched vinyl covers available in tuck n’ roll and smooth designs
•Uncovered seat also available to allow riders to customize to their liking
PART #
DESCRIPTION
SUG. RETAIL
FOR CUSTOM/​RIGID (11.75” L x 9.5” W)
0806‑0080
6
Vertical tuck‑n‑roll
$119.95
PART #
DESCRIPTION
SUG. RETAIL
FOR CUSTOM/​RIGID (11.75” L x 9.5” W) (CONT)
0806‑0081
Smooth
$119.95
PART #
DESCRIPTION
SUG. RETAIL
FOR CUSTOM/​RIGID (11.75” L x 9.5” W) (CONT)
0806‑0079
Uncovered
$79.95
0806‑0075
0806‑0077
0806‑0076
0806‑0078
HARLOT PILLION PADS
•Heavy-duty hand-stiched vinyl construction
•Thick leather base panel for strength and durability
•Molded polyurethane foam padding
•Nickel-plated brass corner grommets for easy custom installation
•Available in four styles: diamond, vertical and horizontal tuck n’ roll and smooth
•Base/footprint measures 10.75” L x 9.125” W)
•Pad measures 8” L x 4.25” W x 1.5” H front and 3” H rear
•Available in black
PART #
FOR CUSTOM/​RIGID
DESCRIPTION
SUG. RETAIL
Horizontal tuck n’ roll
Vertical tuck n’ roll
0806‑0075
0806‑0076
$69.95
69.95
PART #
DESCRIPTION
FOR CUSTOM/​RIGID (CONT)
0806‑0077
0806‑0078
Diamond
Smooth
SUG. RETAIL
$69.95
69.95
2330‑0109
2010-1094
2010-1093
BULLET TAILLIGHT
•Investment-cast aluminum light
housing in either polished or
black finish
•Extra-thick injection-molded polycarbonate plastic
red lens
•Custom 12V 15-element LED board with two phases
(brake light and running light)
•Outside diameter of the taillight lens is 15/8”
•Sold each
PART #
DESCRIPTION
2010‑1093
2010‑1094
Polished
Black
SUG. RETAIL
$119.95
119.95
2330‑0111
2330‑0105
CAFE
FAIRINGS
ADJUSTABLE
FAIRING MOUNT
•New, patent-pending adjustable
fairing mount allows you to mount
and adjust your Road Glide’s fairing to suit your
needs without cutting and welding the OEM mount or
making one from scratch
•Solid steel construction
•Fully articulating design; allows up to 2” forward
adjustment, 4.5” up/down adjustment and a total
fairing angle adjustment sweep of 56°
•Works great with Hell’s Foundry’s Internal Fairing
Supports for Road Glide fairings (sold separately)
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 04‑13 FLTR/​FLTRX MODELS
2330‑0105
2330‑0106
Black powder‑coated finish
Raw steel finish
•Provides
traditional style
with flair
•Divert air around
the driver
•Short-style
fairing measures
17.25” high; long
style measures 20.25” high
•Constructed of black ABS plastic
•Mounting hardware included
•Made in the U.S.A.
PART #
FOR 06‑14 FXD (EXCEPT FXDF)
DESCRIPTION
SUG. RETAIL
SUG. RETAIL
2330‑0109
2330‑0111
Cafe short fairing
Cafe long fairing
$289.95
289.95
$205.95
205.95
2330‑0110
2330‑0112
Cafe short fairing
Cafe long fairing
289.95
289.95
FOR 06‑14 FXDWG
7
GLOSS BLACK CURVED
LAYDOWN LICENSE
PLATE MOUNT
CURVED SIDE-MOUNT
LICENSE PLATE HOLDER
•Built-in LED assembly for license
plate illumination
•Fits most 4” x 7” license plates
•Requires mount clamp for installation
(sold separately, see page 1349 of the
2013 Drag Specialties FatBook)
•Frame meets backing plate for a
finished, custom look
•Accepts most 4” x 7” plates
•Includes license plate light
•For use on any 3-bolt mounted
license plate bracket
Not intended for use with saddlebags.
Please check local laws regarding side
mount license plates before ordering.
PART #
DESCRIPTION
PART #
DESCRIPTION
2030‑0781
Gloss black
SUG. RETAIL
2030‑0780 Gloss black horizontal curved license plate holder
2030‑0783
$129.95
SUG. RETAIL
$119.95
2030‑0784
CURVED LICENSE PLATE FRAMES
FOR CVO MODELS
GLOSS BLACK CURVED LICENSE PLATE FRAME
•Designed for use with Küryakyn’s Bullet Light rear turn signal bar PART #
2040-0421 (sold separately)
•Curved frame design hugs the shape of the rear fender for a sleek look
•Accepts most 4” x 7” license plates
PART #
DESCRIPTION
2030‑0782
For 91‑13 FLHT/​FLTC/​FLHR, 98‑08 FLTR,
06‑09 FLHX, 86‑13 FLST/C/N
2040‑1324
SUG. RETAIL
$69.95
•Get rid of the stock plastic license plate mount
•These frames add beautiful chrome to your CVO fender and cover up the
stock mounting holes
•PART #2030-0783 features a chrome finish and LED license plate light
•PART #2030-0784 features a chrome finish, LED license plate light and
three red LEDs at the bottom of the license plate frame that can be wired
as additional run/brake lights
•Frames require license plate mounting back plate PART #2030-0785 for
installation (sold separately)
•Frames sold each
PART #
DESCRIPTION
FOR 09 FLTRSE, 10‑12 FLHXSE, 12‑13 FLTRXSE, 13 FLHRSE
2030‑0783
2030‑0784
2030‑0785
2040‑1325
Curved lighted LED license plate frame
Curved Tri‑Light LED license plate frame
Mounting bracket for 2030‑0783/‑0784
SUG. RETAIL
$69.95
99.95
49.95
2040‑1325
LED HALO HEADLIGHT AND PASSING LIGHT TRIM RINGS
•Grooved trim ring features white single-function LED lights
•Easy installation and incredible style
•Low-draw LEDs are eye-catching day or night
•Headlight trim rings sold each; passing lamp trim rings sold in pairs
PART #
DESCRIPTION
53/4” HEADLIGHT TRIM RINGS, CHROME
2040‑1324
2040‑1326
For 07‑10 FXSTC, 00‑07 FXSTD, 93‑06 FXSTS, 95‑97 FXSTSB, 97‑03 FLSTS, 05‑07 FLSTSC, 13 FXSBSE, 99 FXR,
96‑13 XL1200C, 99‑09 XL883C, 12‑13 XL1200V
08‑11 FLSTSB, 99‑06 FXST, 99‑09 FXSTB, 94‑99 FXSTC, 11‑13 FXS, 94‑13 Dyna (except 08‑13 FXDF, 12‑13 FLD), 94 FLXR,
04‑08 XL883, 09‑13 XL 883N, 06‑08 XL883R, 04‑08 XL1200R, 07‑11 XL1200L, 07‑12 XL1200N, 10‑12 XL1200X and 07 XL50
41/2” SPOTLIGHT/​PASSING LAMP TRIM RINGS, GLOSS BLACK
2040‑1325
8
For 84‑13 H‑D passing lamps
SUG. RETAIL
$99.95
99.95
159.95
1621‑0557
1621‑0557
1621‑0558
PREMIUM AND RIBBED FLOORBOARDS
•Provide style, quality and function
•Boards feature five spline mounts so you can get a custom fit for the driver or passenger
•Boards measure 81/2” x 4 1/2”
•Must use Küryakyn Non-Pivoting Male-Mount Splined Adapters for installation, see page 1336 of the 2013 Drag Specialties FatBook
•Floorboards sold in pairs
PART #
DESCRIPTION
1621‑0557
1621‑0558
Chrome Premium floorboards for driver or passenger
Gloss Black Ribbed floorboards for driver or passenger
0641‑0157
SUG. RETAIL
0641‑0158
0641‑0159
$189.95
149.95
0641‑0160
MIRROR COVERS
•Quick, clean and simple way to change the look of stock mirrors
•Flame Accent is a 3D design, available in chrome or gloss black finish
•Ace of Spades design includes black inserts that can be left black, custom-painted or left out for a completely chrome appearance
•Black Hole design has contrast look design
•All types install in just minutes with included 3M VHB
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
FOR 03‑14 H‑D MODELS W/ OEM HANDLEBAR‑MOUNTED MIRRORS
0641‑0157
0641‑0158
Chrome flame
Black flame
$39.95
39.95
CHROME SWITCH HOUSINGS
•Chrome finish and smooth lines really dress up
the stock controls
•Fasteners are hidden for a sleek, finished look
•Accept stock H-D switches (not included)
•Sold as a set
PART #
DESCRIPTION
0616‑0208
For 11‑14 Softail
(except 11‑12 FLSTSE,
13 FXSBSE) and
12‑14 FXD models
SUG. RETAIL
$79.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 03‑14 H‑D MODELS W/ OEM HANDLEBAR‑MOUNTED MIRRORS (CONT)
0641‑0159
0641‑0160
0616‑0209
0616‑0211
0616‑0210
0616‑0212
Ace of Spades
Black Hole
$59.95
39.95
0616‑0209
ROCKER SWITCH COVER KITS
•Brushed stainless look matches factory finish
•Easy installation; no disassembly required
•Sold as a set
PART #
DESCRIPTION
0616‑0209
For 96‑13 FLHTCU, 10‑13 FLHTK, 06 FLHTCUSE, 98‑09 FLTR,
11‑13 FLTRU, 00‑01 and 09 FLTRSE, 09‑13 FLHTCUTG
For 06‑13 FLHX, 10‑12 FLHXSE, 10‑11 FLHXXX, 10‑13 FLTRX
For 96‑09 FLHT, 96‑13 FLHTC, 04‑05 FLHTCSE
For 07‑13 FLHTCUSE, 11 FLTRUSE, 12‑13 FLTRXSE
0616‑0210
0616‑0211
0616‑0212
SUG. RETAIL
$26.95
26.95
26.95
26.95
9
CUSTOM DYNAMICS
Everybody at Custom Dynamics takes a hands-on
approach when it comes to the design and
manufacture of their products that feature the latest
in LED technology including the popular colorchangeable accent lighting. Plus, you will now find
more run/turn/brake options than ever before - all
designed to help make riders more visible day or
night. Enlighten your customers today.
2030‑0788
2020‑0621
DRIVING LIGHT MOUNTS
•Made of T-6061 billet aluminum
•Attach to the existing caliper mounts
on the lower fork legs
•Designed to be used with Cool Magic billet LED driving lights PART #2040-0989 or
other small driving lights with 5/16” mounting studs
•Available in chrome and black
•Sold in pairs
PART #
DESCRIPTION
FOR 00‑14 FLHT, FLHR, FLHX, FLTR MODELS
SUG. RETAIL
Chrome
Black
2020‑0621
2020‑0622
$99.95
89.95
2010‑1098
2010‑1097
2010‑1096
2010‑1099
ALL-IN-ONE RADIUS LICENSE PLATE
•Plate features flushmount run, brake and turn signal LEDs
•45 super-bright flushmount dual-intensity red
running/brake LEDs
•20 super-bright flushmount amber turn signal LEDs per side
•6 bright white license plate LEDs
•Frame dimensions: 71/4” L x 41/4” W
•Mounting holes center to center: 53/4” x 213/16”
•Plate has a 12° curve
•Available in black and chrome finishes
•Mounting hardware included
PART #
DESCRIPTION
2030‑0788
2030‑0787
Black
Chrome
SUG. RETAIL
$129.95
129.95
LED TAILLIGHTS WITH
INTEGRATED TURN SIGNALS
•Simple plug-and-play installation
•58 dual-intensity Genesis LEDs in standard taillight
•Available in standard and V configurations
•Standard taillights have 44 dual-intensity run/brake
LEDs and 14 amber turn signal LEDs
•V taillights have 22 red running LEDs, 58 brake light LEDs and 14 amber turn
signal LEDs
•Available with smoke or red lens
FOR 02‑11 V‑ROD MODELS (EXCEPT MUSCLE)
PART #
DESCRIPTION
STANDARD TAILLIGHT
SUG. RETAIL
2010‑1096
2010‑1097
Red
Smoke
$129.95
129.95
2010‑1098
2010‑1099
Red
Smoke
129.95
129.95
V TAILLIGHT
10
TOMBSTONE
TAILLIGHT LENS
•Fits all OEM H-D Tombstone-style taillights
PART #
DESCRIPTION
2010‑1095
Smoked taillight lens
SUG. RETAIL
$24.95
JOKER MACHINE
The craftsmen at Joker Machine have been busy
turning out new products and we’ve been busy
stocking them in our warehouses so that they
are ready to go when your 2014 FatBook™ arrives. These are
innovative, functional and great looking designs that incorporate
Joker’s individuality for riders looking to stand out in the crowd.
Below are a couple of fine examples of their latest work.
2210-0313
2210-0314
2020‑0447
2020‑0451
SIDE MOUNT
SPEEDO RELOCATION BRACKETS
•Make relocating your speedo and indicator lights a snap; no wiring
modifications required
•Mounts are fully CNC machined from solid bar – not cast – for
optimum quality
•Attach to the left fork tube and is virtually adjustable, in every direction,
and clears the fuel tank easily
•Visibility over the handlebars is greatly improved by removing your stock
handlebar bracket mount and at the same time visibility to the speedo is
excellent, placed down on the left of the tank and below the bars for a
real racey look
•Available in your choice of black or clear anodized finishes
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 95‑14 XL W/ 39MM FORK TUBES (EXCEPT 14 XL 48 MODEL)
(XL 883C/​1200C, XL 48 MODELS REQUIRE H‑D SPEEDO BACK PLATE
AND CUSHIONING, HD #67320‑95, 67104‑95)
Black anodized finish
Clear anodized finish
2210‑0313
2210‑0314
$199.95
199.95
ASTRO LED
SIDE RAIL
MARKER LIGHTS
2040‑1274
2040‑1276
•Bullet-style super-bright
LED turn signal/marker
lights really clean up the
look of your bike
•Each features nine
intensely bright LEDs in a
cluster module for light output, amazing for its size (roughly
3/4” diameter at the light source)
•Available in your choice of amber or red LED light color output (amber
only for fork mount version)
•All parts are fully CNC-machined from 6061-T6 billet aluminum
•Available in your choice of chrome or hard black anodized finishes
•May be rotated into virtually any upward-and-downward setting
•Dimensions: a little over 1” diameter, 23/8” long, and stand off the
bike 11/2”
•Sold in pairs
•Mount using Joker’s side rail adapter plate (sold separately) which allows
you to remove your stock rear turn signals and replace them with Astros
for a narrow look
•Made in the U.S.A.
NOTE: If being used as turn signals, a load equalizer may be required.
PART #
DESCRIPTION
SUG. RETAIL
SIDE RAIL‑MOUNT MARKER LIGHTS (ADAPTER PLATES SOLD SEPARATELY)
AIR CLEANER
ASSEMBLY
•Rugged aluminum
construction with chrome finish
•Internal breather for clean look
•Increases airflow, yet maintains a low profile
•Made in the U.S.A.
PART #
DESCRIPTION
1010‑1404
For 08‑13 FLHT/FL/​FLTR/​FLHX and H‑D FL Trikes
2020‑0447
2020‑0448
2020‑0450
2020‑0451
Black anodized finish, amber LED
Chrome finish, amber LED
Black anodized finish, red LED
Chrome finish, red LED
2040‑1274
For 92‑14 Dyna (except FLD), black
(requires Astro center mount light)
For 92‑14 Dyna (except FLD), chrome
(requires Astro center mount light)
For 92‑14 Dyna (except FLD), clear anodized
(requires Astro center mount light)
ADAPTER PLATES FOR SIDE RAIL‑MOUNT MARKER LIGHTS
2040‑1275
SUG. RETAIL
$499.95
2040‑1276
$129.95
139.95
129.95
139.95
46.95
46.95
46.95
11
THUNDER CYCLE DESIGNS
Eddie Trotta’s Thunder Cycle Designs continues to have
some of the best brand recognition in the industry. With
exposure on TV as well as in popular publications, your
customers see all of Thunder Cycle’s latest creations.
Below are a couple of new offerings that feature all of
quality and style you have come to expect from this big
name. Look for more soon in the 2014 FatBook™.
3501‑0884
3501‑0885
SADDLEBAG
LATCH COVERS
0610‑0706
•CNC-machined from 6061 billet
aluminum; available in either
chrome or black
anodized finish
•Feature a back-cut design with diamond-cut center
•Replace stock faceplates on Touring models with hard bags
•Retain all OEM functions
•Mounting hardware included
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 93‑13 FLT, FLHT, FLHX, FLHR, FLTR MODELS
3501‑0884
3501‑0885
MASTER CYLINDER COVERS
0610‑0709
FOR 08-13 FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE
PART #
DESCRIPTION
FRONT BRAKE MASTER CYLINDER COVERS
SUG. RETAIL
•CNC-machined from 6061 T-6 billet aluminum
•Features a back cut/diamond Rolex design
•Available in either chrome or black anodized finish
•Sold each
•Made in the U.S.A.
SUG. RETAIL
0610‑0706
0610‑0707
Chrome
Black anodized
$57.95
57.95
$330.95
330.95
0610‑0708
0610‑0709
Chrome
Black anodized
57.95
57.95
Chrome, Rolex
Black anodized, Rolex
HYDRAULIC CLUTCH MASTER CYLINDER COVERS
SINGLE-FIRE
IGNITION COIL
•Improves overall performance
including starting, stops high-speed
misfires and increases mileage
•30,000V output
•Peak spark voltage increases by at
least 20%
PART #
DESCRIPTION
2102‑0278
0.5 ohm 07‑14 Twin Cam models (except FXS,
FLS, FXSB/SE models); repl. OEM #31696‑07A
SUG. RETAIL
$59.95
LINING KIT FOR DRAG SPECIALTIES EXTENDED
OEM-STYLE SADDLEBAGS AND LIDS
•Mildew- and moisture-resistant treated
•Black and pre-cut to size
•Material has a pressure-sensitive adhesive on the back for an easy peeland-stick application
•Includes pre-cut pieces and rigid panel to create a smooth flat bottom
•Installation creates lined lids, sides and bottom to help protect contents;
includes instructions
•Sold as a set for a pair of saddlebags and lids
•Made in the U.S.A.
PART #
DESCRIPTION
3501‑0875 For Drag Specialties extended saddlebags and lids
PART #s 3501‑0832, 3501‑0833, 3501‑0834 and 3501‑0835
12
SUG.
RETAIL
$89.95
2106‑0224
SIDE HINGE
IGNITION SWITCH
•Three-terminal ignition switch
•Available in chrome or gloss black
•Include connector
•Sold each
PART #
DESCRIPTION
SUG. RETAIL
FOR 03‑08 FXDWG, 03‑10 FXST/​FLST, 03‑13 FLHR MODELS; REPL. OEM #71313‑96A
2106‑0224
2106‑0225
Chrome
Black
$34.95
34.95
0616-0198
1622‑0475
1622‑0474
0616-0203
1622‑0476
1622‑0477
XL FORWARD CONTROL CONVERSION KITS
LIGHTED SWITCH KIT
•Feature LED illuminated switch caps
•Switches have color-coded 48” leads with black protective covers
•Kits include all required switches found on standard models; radio/cruise
switches are not included
PART #
DESCRIPTION
07‑13 FLHT, FLHX, FLTR MODELS W/ RADIO CONTROLS
SUG. RETAIL
0616‑0196
0616‑0197
Chrome
Black
$299.95
289.95
0616‑0198
0616‑0199
Chrome
Black
329.95
319.95
0616‑0200
0616‑0201
Chrome
Black
289.95
279.95
0616‑0202
0616‑0203
Chrome
Black
329.95
319.95
0616‑0194
0616‑0195
Chrome
Black
199.95
189.95
07‑13 FLHT, FLHX, FLTR MODELS W/ RADIO AND CRUISE CONTROLS
96‑06 FLHT, FLHX, FLTR MODELS W/ RADIO CONTROLS
96‑06 FLHT, FLHX, FLTR MODELS W/ RADIO AND CRUISE CONTROLS
FOR 96‑10 FXST/​FLST, 96‑11 FXD/​FXDWG AND 96‑03 XL MODELS
•Late model XL models with forward controls no longer allow the fitting
of standard rider footpegs. These kits let you mount standard footpegs
on the late model XL’s with forward controls
•Works with all OEM and Drag Specialties forward control kits
for 04-14 XL models
•Includes a left and right footpeg mount in either chrome or anodized
black finish complete with mounting hardware
•Available in standard length or +2” extended length
NOTE: If converting standard forward controls to extended, a longer
shifter linkage rod, 101/4” long is also required, available separately.
We suggest using the 2” extension, PART #1601-0003 along with the
original linkage rod.
PART #
DESCRIPTION
FOR 11‑14 XL1200C/X/V models
1622‑0474
1622‑0475
1622‑0476
1622‑0477
Standard length, chrome
Standard length, black
2” extended length, chrome
2” extended length, black
SUG. RETAIL
$69.95
69.95
119.95
119.95
FRONT FENDER
TIP LIGHT
•Perfect fit on OEM and
aftermarket front fenders
•Replacement lenses and bulbs
available separately, see the 2013
Drag Specialties FatBook
COMPENSATOR SPROCKET
•34-tooth
•High quality steel construction
PART #
DESCRIPTION
1120‑0304
For 06‑11 FXS, FXST, FLST models
repl. OEM #40296‑06A
SUG. RETAIL
$129.95
PART #
DESCRIPTION
FOR 84‑95 FLT, FLHT (EXCEPT FLTR) AND 86‑95 FLSTC/N
2040‑1247
Light w/ smoke lens
SUG. RETAIL
$16.95
GLOSS BLACK SHORT TURN SIGNAL MOUNTS
FOR 39MM/49MM FORKS
•Move turn signal closer to the bike for a cleaner look
•Available in gloss black
•Spacers are included for installation on 49mm forks
•Sold in pairs
NOTE: triple trees must have pinch bolts that face outward at a 90° angle from the fork.
PART #
DESCRIPTION
2020‑0589
For 87‑00 FXR, 91‑05 Dyna Glide, 87‑07 XL w/ 39mm forks and
06‑07 Dyna Glide w/ 49mm forks
SUG. RETAIL
$24.95
13
BLIND THREADED STEEL BUNGS
•These flanged, blind-threaded mild steel bungs are
perfect for making gas tank and oil tank mounts, or
for creating a mounting point in any fluid-filled vessel
•1” long overall
•5/16”-18 or 3/8”-16 threads
•.750” small diameter, 1.00” large diameter
•Sold in 4-packs
•Made in the U.S.A.
PART #
DESCRIPTION
0502‑0445
0502‑0447
5/16”‑18
SUG. RETAIL
$21.95
21.95
3/8”‑16
0502‑0444
•These threaded, coped steel bungs are 3/4”
or 1” diameter and are drilled and tapped all
the way through with your choice of 5/16”-18
or 3/8”-16 thread
•Coped for a perfect fit on 1” tubing; tack in
place, then weld it up; mounts are finished
in minutes
•3/4” bungs sold in 4-packs; 1” diameter bungs
sold in 2-packs
•Made in the U.S.A.
PART #
3/4” DIAMETER
0502‑0459
•These weld-in steel bungs allow you to
change or move your petcock location
to wherever you desire
•Also very useful for oil tank fittings and
anything else requiring NPT threads
•Sold in 4-pack or in a pair as noted
•Made in the U.S.A.
5/16”‑18
0502‑0460
0502‑0457
0502‑0451
5/16”‑18
PART #
DESCRIPTION
0502‑0444
0502‑0468
0502‑0459
1/8”
NPT (.625” T, .625” small o.d., .875” large o.d.) (4‑pk.)
NPT (.375” T, .720” small o.d., .906” large o.d.) (4‑pk.)
3/8” NPT (.375” T, .860” small o.d., 1.187” large o.d.) (pr.)
1/4”
$21.95
25.95
15.95
0502‑0453
THREADED STEEL BUNGS
•3/4” diameter threaded steel bungs are great for
mounts of all sorts
•Available in 1/4”-20 x 1” long, 5/16”-18 in 1/2” or 1” length,
and in 3/18”-16 in 1/2”, 1”, or 11/2” long
•These are drilled and tapped all the way through
•Sold in 4-packs
•Made in the U.S.A.
PART #
DESCRIPTION
0502‑0465
0502‑0456
0502‑0453
0502‑0455
0502‑0448
0502‑0454
1/4”‑20
x 1”
5/16”‑18 x 1/2”
5/16”‑18 x 1”
3/8”‑16 x 1/2”
3/8”‑16 x 1” (4‑pk.)
3/8”‑16 x 11/2”
SUG. RETAIL
$18.95
17.95
18.95
17.95
18.95
18.95
x 1/2”
x 1/2”
3/8”‑16 x 1”
DESCRIPTION
For 7/8” handlebar construction (.875” dia.)
For 1” handlebar construction (1.00” dia.)
14.95
14.95
15.95
3/8”‑16
0502‑0452
•These full radius steel bungs are
1” long x 3/4” diameter
•These are a great bung for blind threaded
items like fender mounts or struts or anything
else you can think of
•Available in 5/16”-18 or 3/8”-16 thread
•Sold in 4-packs
•Made in the U.S.A.
PART #
DESCRIPTION
0502‑0452
0502‑0449
5/16”‑18
SUG. RETAIL
$18.95
18.95
3/8”‑16
•These are great as they allow for very clean
mounting; the head of a standard Allen bolt will
fit flush inside
•The outside measurements are 3/4” diameter
and 3/4” long
•Available for 5/16” or 3/8” Allen bolts
•Sold in 4-packs
•Made in the U.S.A.
PART #
DESCRIPTION
0502‑0450
0502‑0443
For 5/16” Allens
For 3/8” Allens
SUG. RETAIL
$17.95
17.95
22MM PETCOCK BUNG
•These are coped, threaded bungs
for making custom handlebars
•Tapped for 1/2”-20 fine thread
•They give 1” of rise from the flat end
to the bottom of the coped section
•Available for 7/8” or 1” handlebars
•Sold in pairs
•Made in the U.S.A.
0502‑0467
0502‑0458
$22.95
24.95
22.95
24.95
25.95
COUNTERBORE STEEL BUNGS
FOR ALLEN HEAD BOLTS
COPED HANDLEBAR
RISER BUNGS
14
x 1/2”
x 1”
3/8”‑16 x 1/2”
3/8”‑16 x 1”
3/8”‑16 x 11/2”
0502‑0450
0502‑0467
PART #
SUG. RETAIL
5/16”‑18
FULL RADIUS THREADED
STEEL BUNGS
SUG.
RETAIL
0502‑0460
DESCRIPTION
0502‑0466
0502‑0462
0502‑0464
0502‑0463
0502‑0446
1” DIAMETER
NPT THREADED BUNGS
0502‑0446
COPED THREADED
STEEL BUNGS
0502‑0445
SUG. RETAIL
$15.95
15.95
•Relocate the petcock on your gas tank,
or change the style petcock your gas
tank accepts with this weld-in 22mm
mild steel petcock bung
•Flange allows easy welding of this bung
to thinner sheet metal
•Sold each
•Made in the U.S.A.
PART #
DESCRIPTION
0502‑0461
22mm petcock bung
SUG. RETAIL
$11.95
0630‑1314
0630‑1315
0630‑1320
0630‑1313
0630‑1319
COLE FOSTER
SIGNATURE SERIES GRIPS
GT GRIPS
•Salinas Boy Cole Foster is famous for his steady
hand, cool eye and unwavering attention to detail
•Inject a handful of King Cole’s custom style into
your chopper with Cole Foster Grips from Lowbrow Customs
•Each pair comes in an embossed Cole Foster tin box
•Injection-molded Krayton rubber
•Available in 1” in solid and marbled colors
•Sold in pairs
•Made in the U.S.A.
•If timeless design and bold colors
are your thing, our GT Grips may be
just your speed
•Injection-molded Krayton rubber, and
guaranteed to feature authentic classic styling
•Available for 1” handlebars
•Sold in pairs
•Made in the U.S.A.
NOTE: Throttle sleeve sold separately.
NOTE: Throttle sleeve sold separately.
PART #
DESCRIPTION
0630‑1313
0630‑1314
0630‑1315
Black
Antique gray marble
Mocha
SUG. RETAIL
$24.95
24.95
24.95
PART #
DESCRIPTION
0630‑1319
0630‑1320
0630‑1321
0630‑1322
Black
Dove gray
Oxblood red
Teal
RUBBER MOUNT
TRIANGULAR TABS
•Same idea as Lowbrow’s finger tabs,
but with a different shape
•These tabs are 2” long x 21/2” wide, flat to the bolt center is 1.4”
•The supplied 5/16”-18 x 1” chrome button-head Allen bolt
nestles right in and looks great
0502‑0470
•Available with your choice of
PART #
DESCRIPTION
SUG. RETAIL
brass or aluminum insert
1/4” thick w/ alloy insert
0502‑0470
$18.95
•Sold each
1/4” thick w/ brass insert
0502‑0477
18.95
•Made in the U.S.A.
UNIVERSAL
MOUNTING TABS
0502‑0471
0502‑0474
•Save time and aggravation
with these 1/8” thick mild steel tabs
•Perfect for mounts of all sorts
•Sold in 4-packs
•Made in the U.S.A.
PART #
DESCRIPTION
0502‑0471
0502‑0474
0502‑0475
1.5” wide x 1.25” tall, .25” hole
1” wide x 3.5” tall, .25” hole
1.5” wide x 1.25” tall, .25” hole
0630‑1321
SUG. RETAIL
$13.95
13.95
13.95
2401‑0832
2401‑0833
2401‑0829
2401‑0832
2401‑0831
2401‑0832
For 08‑14 Softail and Dyna
models (except Springer)
$27.95
For 00‑07 Twin Cam models
(except Springer)
42.95
For 84‑92 Big Twin and
XL models
17.95
For 06‑14 V‑Rod, 08‑14 FLHT,
FLHR, FLHX, FLTR models and
H‑D FL Trike
15.95
For 02‑05 V‑Rod
42.95
For 04‑13 XL models
(except XR1200/​XR1200X)
12.95
For 00‑03 XL models
42.95
$18.95
18.95
18.95
18.95
•These weld-on finger tabs give you a
tough mount with the added comfort of a
0502‑0469
military-spec rubber grommet
1
•The /4” thick steel will handle the weight of your oil tank or
gas tank with ease, and the custom-machined spacer keeps
the squish right where you need it
•The supplied 5/16”-18 x 1” chrome button-head Allen bolt
nestles right in and looks great
•These tabs are 31/2” long by 11/4” wide, from the flat to the
bolt center is 2.9”
•Available with your choice of brass or aluminum insert
•Also available in 1/8” thick steel
•Sold each
•Made in the U.S.A.
PART #
DESCRIPTION
0502‑0469
0502‑0472
0502‑0473
1/4”
thick w/ alloy insert
1/4” thick w/ brass insert
1/8” thick w/ alloy insert
SUG. RETAIL
$18.95
18.95
18.95
2401‑0831
•UNJ3A rolled threads
•Polished to a mirror finish
•Custom 450 stainless steel
•Available in socket head or OEM-style
•Made in the U.S.A.
2401‑0830
SUG. RETAIL
RUBBER
MOUNT
FINGER
TABS
CALIPER MOUNTING BOLT KITS
SUG.
PART #
DESCRIPTION
RETAIL
SOCKET HEAD FRONT CALIPER MOUNT KITS (TWO
REQUIRED FOR DUAL DISC)
0630‑1322
2401‑0837
PART #
DESCRIPTION
SOCKET HEAD REAR CALIPER MOUNT KITS
2401‑0836
2401‑0838
2401‑0837
2401‑0835
2401‑0837
2401‑0837
SUG.
RETAIL
For 08‑14 Softail and
Dyna models
$32.95
For 06 FXSTSSE, 06‑07 FXST/​
FXSTB/​FXSTS, 07 FLSTF)
40.95
For 00‑07 Twin Cam models
(except 06 FXSTSSE, 06‑07
FXST/​FXSTB/​FXSTS, 07 FLSTF) 38.95
For 08‑14 FLHT, FLHR, FLHX,
FLTR models
21.95
For 02‑05 V‑Rod
38.95
For 00‑03 XL models
38.95
OEM‑STYLE REAR BRAKE CALIPER MOUNT KIT
2401‑0834
For 08‑14 FLHT, FLHR, FLHX,
FLTR models
25.95
15
ROKKER™ SADDLEBAG SPEAKER KIT
•The largest diameter speakers that can be installed into the Harley® OEM-style hard saddlebags
•217 watts maximum output
•Kit has been specifically designed for 98-13 Harley Bagger saddlebags
•Very thin, waterproof injection-molded polycarbonate driver cone
•High efficiency, vented voice-coil and magnet structure for improved cooling when operating at high volume levels for extended periods
•Saddlebag lids are finished in primer black color, ready for the custom color of your choice
•Top quality hardware, custom plug-n-play wiring harness and complete installation instructions are included
PART #
DESCRIPTION
4405‑0320
For 98‑13 FLHT/​FLHX/​FLTR models w/ hard saddlebags
SUG. RETAIL
ROKKER™ TWEETER KIT
•Designed specifically for use on the 98-13 OEM BatWing or
Road Glide-style fairing
•25mm diameter high-output dome tweeters bring extra high-frequency
definition to your Harley Bagger audio system
•Rated at 300W peak power (150W RMS)
•Tweeters are spec’d at 2 ohms nominal impedance
•Work with any radio or amplifier designed to operate at a 2, 4, 6
or 8-ohm load
•Kit includes two tweeters and alternate connection wire assemblies
•All necessary mounting hardware and complete installation
instructions included
$749.95
THUMPERPHONE.PRO
SMARTPHONE HELMET HEADSET KIT
SPECIAL INSTALLATION NOTES
1. Remove the outer fairing shell
2. Remove both lower gauges next to the radio, retain the gauge cups and
nuts to be used on the tweeters
3. Install the tweeter using previously removed gauge cups and nuts
•Allows you to use and control a smartphone while wearing your helmet
(functionality varies by phone type)
•Two full-stereo helmet speakers provide clear sound for music, phone
calls or rider-to-rider communication when using intercom/walkie-talkie
apps on your phone
•Remote pause/play buttons for playing/pausing music
•Allows you to hear phone alerts while riding
•Remote control button allows you to answer and hang up calls
•Can use voice command prompts to control navigation apps/devices
•Rugged, reliable and requires no extra batteries for use
•Nothing mounts on the outside of the helmet
•Kit includes boom microphone (for 3/4 helmets), fixed microphone (for
full-face helmets), stereo helmet speakers (11/2” x 1/2”), earbud adapter
cable, mini control button, heavy-duty control button, junction cable and
coiled extension for headset cable
PART #
DESCRIPTION
PART #
DESCRIPTION
4405‑0321
For 98‑13 FLHT/​FLHX/​FLTR models
4403‑0102
ThumperPhone.Pro headset
16
SUG. RETAIL
$149.95
NOVEMBER 2013
| 9901-1376
SUG. RETAIL
$59.95
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising