IFS D7400 Series Hardened Ethernet Drop and Repeat Transceiver

IFS D7400 Series Hardened Ethernet Drop and Repeat Transceiver
D7400 SERIES
PRODUCT SPECIFICATION
HARDENED 4 PORT 10/100 Mbps ETHERNET DROP AND REPEAT
APPLICATION EXAMPLES
• Outdoor Traffic Management Control
– Intra-City and Inter-City Traffic Management
• Industrial and Factory Automation
• High-Speed Computer Links
– High-Speed Data Transmission
• CCTV
FEATURES
• 10/100 Mbps Ethernet
- Auto-Negotiating
- 10/100 Selectable
• Auto Network Detection MDI/MDI-X
DESCRIPTION
The IFS D7400 Series Ethernet transceivers provide drop-and-repeat
transmission of 10/100 Mbps Ethernet data signals over one or two
optical fibers. The transceivers feature 4 electrical and 2 optical ports
for drop-and-repeat capability that allows the user to easily configure
the network operation. The 4 electrical ports are capable of
connecting at 10/100 Mbps Ethernet data 802.3 protocol using
auto-negotiating and auto-MDI/MDIX features. The IFS D7400
transceivers are compatible with the IFS D7100 Series single port
transceivers. Models within this series are available for use with
multimode or single mode optical fiber and are compatible with
standard 100-FX networks. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments. Each
transceiver incorporates power and link status indicating LED’s for
monitoring proper system operation. In addition, 2 continuously
active contact closure relays are available to activate an external
audible or visual warning signal in the event of a fiber break or
loss of power. The modules are available in either stand-alone
or rack mount.
• Relay Output for Network Communication
Failure Notification
• Power, Transmit and Receive Data Status LED Indicators
D
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Multimode and Singlemode Versions Available
• IEEE 802.3 Compliant
• NTCIP Compatible
• No In-field Electrical or Optical Adjustments Required
• ST Optical Connectors Standard
Available at:
www.
• Hot-Swappable Rack Modules
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
• Distances up to 60km (37 miles)
• Comprehensive Lifetime Warranty
ORDERING INFORMATION
PART
NUMBER
DESCRIPTION
FIBERS
REQUIRED
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
4 Port Ethernet Drop & Repeat (1310 nm)
2 In/2 Out
10 dB
6.2 miles (10 km)
D7420WDM
4 Port Ethernet Drop & Repeat (1310/1550 nm)
1 In/1Out
10 dB
6.2 miles (10 km)
SINGLEMODE D7430WDM
9/125µm
4 Port Ethernet Drop & Repeat (1310/1550 nm)
1 In/1Out
20 dB
37 miles (60 km)
D7420
MULTIMODE
62.5/125µm**
ACCESSORIES♦
OPTIONS
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ sales@ifs.com
Europe, Middle East, Africa TEL +44(0) 1732 522 777 ■ Asia Pacific TEL +65 6235 2661 ■ Latin America TEL (512) 477-8787
D7400 SERIES
TECHNICAL SPECIFICATION
HARDENED 4 PORT 10/100 Mbps ETHERNET DROP AND REPEAT
SPECIFICATIONS
Data Interface:
Data Rate:
Ethernet
10/100 Mbps
Circuit Board:
Size (in./ cm.) (LxWxH):
Surface Mount:
Rack Mount:
Shipping Weight:
Number of Inputs:
IEEE 802.3 Compliant
4
ENVIRONMENTAL
DATA
WAVELENGTH
D7420
D7420WDM
1310 nm
1310/1550 nm (1550/1310 nm)
D7430WDM
1310/1550 nm (1550/1310 nm)
NUMBER OF FIBERS
1 or 2
MTBF:
Operating Temp:
>100,000 hours
-40° C to +74° C
Storage Temp:
Relative Humidity:
-40° C to +85° C
0% to 95% (non-condensing)†
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
ST
Terminal Plug with screw clamps
RJ-45
ELECTRICAL & MECHANICAL
Power:
Number of Rack Slots:
Voltage Regulation:
Current Protection:
7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm.
7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.6 cm
< 2 lbs./0.9 kg
† May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
CONNECTORS
Optical:
Power:
Data:
Meets IPC Standard
AGENCY COMPLIANCE
12 VDC @800 mA
3
Solid-state; independent on each board
Automatic Resettable Solid-State Current
Limiters
Federal Supply Schedule
MADE IN THE USA
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
Multimode
62.5/125µm**
Singlemode
9/125µm
WAVELENGTH
TRANSCEIVER
MODEL
1310 nm
D7420
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
10 dB
6.2 miles (10 km)
20 dB
37 miles (60 km)
D7420WDM (1310/1550 nm)
1310/1550 nm
D7430WDM (1310/1550 nm)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
up to 37 miles
(60 km)
D7430
D7130
D7430
D7130
10/100 Mbps
ifs
International
ifs
Fiber
Systems
Incorporated
203.426.1180
Host
International
ifs
Fiber
Systems
Incorporated
203.426.1180
International
ifs
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
1 Fiber
9/125µm SM
10/100 Mbps
Remote
10/100 Mbps
Remote
10/100 Mbps
Remote
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ sales@ifs.com
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
12/21/04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising