cordless lawn mower kit

cordless lawn mower kit
WHAT’S IN THE BOX
Cordless Lawn Mower
CORDLESS
LAWN MOWER KIT
Safety Ker
INSTRUCTION MANUAL
SPECIFICATIONS
2 x 4.0Ah Batteries
2 x 4.0Ah Batteries
Voltage:
18V x 2
Battery:
4.0Ah Li-ion
Charge Time:
80min
Cutting Diameter:
360mm
Cutting Heights:
25-75mm (6 settings)
No Load Speed: 3,000/min
Grass Catcher: 40 litres
Weight:16.9kg
2 x Fast Charger
ozito.com.au
PXCLMK-418
WARRANTY
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: grass catcher,
wheels, blade, cord clips, bearings etc..
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
0316
KNOW YOUR PRODUCT
SETUP & PREPARATION
CORDLESS LAWN MOWER
1
1. ASSEMBLY
1.Wheels
8. Cord Clips
2.Batteries
9. Lock-off Button
3. Battery Cover
10.Upper Handle
4. Height Adjustment Lever
11.Handle Securing Lever
5. Lifting Handle
12.Start/Stop Lever
Fitting the Rear Wheels
6. Quick Adjustment Lever
13.Grass Catcher
7. Lower Handle
14.Grass Catcher Flap
1.Place the wheel onto the axle
with the flat side facing towards
the mower.
2.Secure the wheel with a washer
and p-clip.
3.Push the hub cap onto the centre
of the wheel so it clicks into
place.
4.Repeat this process for the
second wheel.
2
3
4
5
6
7
WARNING! Ensure the tool is switched off
and BATTERIES ARE disconnected before
performing any of the following tasks.
8
9
10
11
12
13
14
Fitting the Lower Handles
ACCESSORIES
15. Battery Charge LED’s
18.Charger LED’s
16. Battery Charge Indicator Button
19.Charger
1.Remove the quick adjustment
lever and lower handle mount.
2.Place the lower handle into the
mount and slide onto the bolt.
Make sure to insert the end
without the rubber stop.
3.Secure the lower handle with a
washer and the quick adjustment
lever.
4.Repeat this process on the other
side for the second lower handle.
17.Safety Key
15 16 17 18 19
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Upper Handle
Assembling the Grass Catcher
1.Align the holes in the upper
handle and lower handle. Care
should be taken not to impinge
cord.
2.Place the handle securing lever
bolt through the holes from the
inside.
1.Clip the two lower side halves
together by pushing each lug
firmly until it clicks in.
3.Place a washer and the handle
securing lever onto the bolt to
secure in place.
4.Repeat this process for the
opposite side.
Fitting and Removing the Grass Catcher
2.Align the upper part and the
lower halves and push each
individual lug into its opposite
location.
Important! Only FIT AND remove the catcher
when the MOWER is switched off and the
MOTOR has come to a stop.
1.Lift up the grass catcher flap
while guiding the catcher into the
2 hooks.
2.Once the grass catcher is in
place, the flap can be lowered.
Adjusting the Handle
1.Release both quick adjustment
levers and rotate the handle into
the desired position.
2.Secure in place by tightening
both quick adjustment levers.
3.To remove, raise the flap and lift
the catcher out.
Securing the Cord
Ensure the cord follows the handle smoothly from the switch to the body of
the mower.
1.Locate cord on outside of handle.
Push the supplied cord clips over
the cord and onto the handle to
secure in place.
WARNING! When Fitting the grass catcher
after emptying, always ensure there is no
build up of grass in the grass chute.
Grass Catcher Indicator
Note: C are should be taken not to impinge cord when folding down the
handle.
The grass catcher is fitted with an indicator flap
at the rear of the catcher to help identify when
to empty.
If the indicator flap is down while
operating then the grass catcher is full
and needs emptying.
2. BATTERY & CHARGING
CAUTION: The charger for this product
should be protected by a residual current
device (rated at 30mA or less).
Charging your lithium ion battery
The tools battery has been shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires immediate charging
Charging your lithium ion battery - Fast Charger
Low state of charge, requires charging soon.
1. Connect the charger into a mains power outlet.
Mid state of charge
2.The charger LED will flash green
showing power is being supplied
to the charger.
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
Battery protection system
3.With the charger sitting on a flat
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a firm connection.
The tool is equipped with the battery protection system, which helps to ensure a long
service life.
The output power automatically cuts off during operation when the tool and/or battery
are placed under the following situations:
• When the tool is overloaded:
4. T he charger LED will illuminate
red signifying that the battery is
charging.
5. T he charger LED will illuminate
green once the battery is fully
charged.
If this occurs, release the trigger switch and remove causes of overload, then pull
the switch trigger again to restart.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during use or
immediately after using the tool.
Note:Always use 2 batteries of same capacity and same charge state with the
mower.
Charger LED Indicator
LED Indicator
Situation
GREEN (Flashing)
Stand By (no battery pack is inserted)
RED (Flashing)
Battery is charging (low charge)
RED (Illuminated)
Battery is charging (mid charge)
GREEN (Illuminated)
Battery is fully charged
BOTH(Illuminated)
Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing)
Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
OPERATION
3. INSERTING & REMOVING THE BATTERIES
4. CONTROLS
Inserting the Batteries into the Mower
Switching On and Off
Note:Always use 2 batteries of same capacity and same charge state with the mower.
To prevent accidental start up, the mower is fitted with a dual action switch.
1.Pull the securing latch forward
and open the battery cover.
3.Insert the safety key.
(If the mower is not going to be used
immediately, do not insert the safety
key.)
2.Slide two batteries of the same
capacity and same charge state
into the mower aligning the ribs
so that they click into place.
4.Close the battery cover.
1.Press and hold the lock-off
button.
2.Pull the start/stop lever towards
the handle to start the mower
and then release the lock-off
button.
3.Release the start/stop lever to
stop the mower.
Adjusting the Cutting Height
The height adjustment lever provides 6 cutting heights from 25mm to 75mm.
Removing the Batteries from the Mower
1.Push lever 1 outwards away
from the mower body and hold to
release the lever.
1.Pull the securing latch forward
and open the battery cover.
2.Adjust 2 until the required cutting
height is selected.
3.Release lever 1 and check that it
is securely seated in the required
cutting height.
2.Press the battery release tab and
remove the batteries.
3.Close the battery cover.
CAUTION: Be careful during cutting height
adjustments to prevent entrapment of the
fingers between moving height adjustment
lever and the mower housing.
PXCLMK-418
OPERATION
MAINTENANCE
WARNING! Always ensure the lawn mower
blade has completely stopped, remove
safety key, battery and grass catcher prior
to any maintenance.
5. MOWING
• While using your lawn mower always wear substantial closed, heavy
footwear and long trousers.
• Make sure the lawn is clear of sticks, stones, wire and debris; they could
be thrown by the blade.
• Before using the lawn mower and after any impact, check for signs of
wear or damage and repair as necessary.
• Replace a worn or damaged blade together with the blade bolt to preserve
balance.
Lawn Mowing Tips
tart mowing the edge of the lawn and
S
work along making sure to overlap each
pass by a few centimetres.
Removing and Fitting the Blade
CAUTION! ALWAYS USE GLOVES WHEN HANDLING
THE BLADE. SHARP EDGES COULD CAUSE INJURY.
1. T o remove the blade bolt, hold the blade firmly and with
a 12mm spanner loosen the blade bolt by turning it anticlockwise.
2. Remove the blade bolt, washer and blade.
Replace the metal blade after 50 hours
mowing or 2 years whichever is sooner. If
the blade is cracked or damaged replace it
with a new one.
3.To fit the blade, place the blade over the centre hole
aligning the lugs.
4. Tighten the blade bolt firmly with a 12mm spanner by turning it clockwise. Do not overtighten.
F or optimum grass collection, always
mow in a straight line; do not swing
the lawn mower from side to side.
When mowing long grass be sure to
not overload the motor. First cut with
the highest cutting height and then
to the desired height. This will help
reduce the load.
Important! Do not mow with poor visibility
conditions, in the rain or when grass is
wet.
Cleaning, Maintenance and Storage
•
•
•
•
•
K eep all nuts, bolts and screws tight to be sure the lawn mower is in a safe working condition.
Check the catcher frequently for wear or deterioration.
Replace worn or damaged parts for safety.
Only use the replacement blade and blade bolt specified for this product.
Be careful during adjustments of the lawn mower to prevent entrapment of the fingers between
moving blade and fixed parts of the machine.
• When not in use, the mower should be stored in a dry, frost-free location, out of reach of
children. If the housing of the mower requires cleaning, do not use solvents but a moist soft
cloth and brush only.
• Frequently check the wheel threads are firm and tight.
Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the
trimmer by an unauthorised person or by mishandling of the trimmer. This tool is designed for DIY
use - use in commercial or industrial environments will void the warranty.
TROUBLESHOOTING
Problem Cause
Remedy
Mower is not
starting
Check underneath the mower and clear out
as necessary
Charge battery
Possible clogging
Battery is low in charge
Battery not inserted
properly
Grass too long
Mower is
hard to push
Insert battery pack correctly
Raise the cutting height to reduce starting
load
Fit correctly
Safety key not inserted
correctly
Height of cut too low
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR
BATTERY CHARGER.
1.
2.
3.
4.
5.
6.
7.
Raise cutting height
8.
Cutting blade blunt
Replace blade
9.
Possible clogging
Check underneath the mower and clear out
as necessary
Raise the cutting height and walk slower
Grass too long
Grass too dense
Motor stops
while cutting
BATTERY AND CHARGER SAFETY WARNINGS
Wet grass
Raise the cutting height and walk slower and
cut more frequently
Wait until the grass dries before mowing
Height of cut too low
Raise the cutting height
Battery has no power
Charge battery
10.
11.
12.
13.
14.
15.
16.
17.
Mower is
Height of cut too low
not catching
grass properly Wet grass
Raise the cutting height
Mower
vibrating
Replace blade
Before using the charger read all instructions and cautionary markings on the charger, battery pack
and the product using the battery pack.
This charger is not intended for any uses other than charging rechargeable batteries. Any other use
may result in risk of fire, electric shock or electrocution.
Do not place any object on top of the charger or place the charger on a soft surface that may result in
excessive internal heat. Place the charger in a position away from any heat source.
To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when
disconnecting the charger.
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected
to damage or stress.
An extension cord should not be used unless absolutely necessary. Use of an improper extension cord
could result in the risk of fire, electric shock or electrocution.
Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any
way. Have it checked by an electrician or power tool repairer.
Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is
required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning.
Removing the battery pack will not reduce this risk.
Never attempt to connect 2 chargers together.
DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed
40ºC (such as inside sheds or metal buildings in summer).
The charger is designed to operate on standard household electrical power (240 volts). Do not attempt
to use it on any other voltage!
The battery pack is not fully charged out of the carton. First read the safety instructions and then
follow the charging notes and procedures.
The longest life and best performance can be obtained if the battery pack is charged when the air
temperature is between 18 - 24ºC. Do not charge the battery pack in an air temperature below 10ºC or
above 40ºC. This is important and will prevent damage to the battery pack.
Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery
can explode in a fire.
Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or
cracks, immediately discontinue use and do not recharge.
During charging, the battery must be placed in a well ventilated area.
Wait until the grass dries before mowing
Bent or damaged blade
DESCRIPTION OF SYMBOLS
SPARE PARTS
Spare Part
Part No.
Battery pack 4.0Ah
PXBP-400
Fast charger
PXCG-030 or PXCFCH-030
Regulator compliance mark
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer
Nm
Newton Meters
Read instruction manual
Pull out Safety Key before
carry out any repair work
Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquires@ozito.com.au
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household
waste but in an environmentally friendly way. Please recycle where facilities exist.
Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of
recycled material decreases pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council authority for recycling advice.
Always keep the lawnmower on the ground when mowing.
Tilting or lifting the lawnmower may cause stones to be thrown out.
Keep bystanders away. Do not mow whilst people especially children
or pets are in the mowing area.
Beware of servering toes or hands. Do not put hands or feet near
a rotating blade.
Blade continues to rotate after the machine is switched off. Wait until all
machine components have completely stopped before touching them.
Do not mow in the rain or leave the lawnmower outdoors while raining.
ELECTRICAL SAFETY
WARNING! When using mains-powered tools, basic safety precautions, including
the following, should always be followed to reduce risk of fire, electric shock, personal
injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical insulation failure within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of
damage, wear and ageing. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power
input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
The power supply for this products charger should be protected by a residual current device (rated at 30mA
or less). A residual current device reduces the risk of electric shock.
Save these instructions and other documents supplied with this tool for future reference.
The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating
plate.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
This tools charger is double insulated, therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious personal injury.
b.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5. Battery tool use and care
a.Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
b. Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
c. When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
f. LAWN MOWER SAFETY WARNINGS
WARNING! If not used properly this lawn mower can be dangerous!
This lawn mower can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure
reasonable safety and efficiency in using this lawn mower. The operator is responsible for following the warning and safety and
instructions in this manual and on the lawn mower. Never use the mower unless the catcher or guards provided by the
manufacturer are in the correct position.
1) Training
• Read the instructions carefully. Be familiar with the controls and the proper use of the appliance.
• Never allow children or people unfamiliar with these instructions to use the appliance. Local regulations may restrict the age of the operator.
• Never mow while people, especially children, or pets are nearby.
• The operator or user is responsible for accidents or hazards occurring to other people or their property
• Know your controls. Read the manual carefully. Learn how to stop the engine quickly in an emergency.
2) Preparation
• While mowing, always wear substantial footwear and long trousers.
• Do not operate the appliance when barefoot or wearing open sandals.
• Thoroughly inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects. They
could be thrown by the blade.
• Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or
damaged blades and bolts in sets to preserve balance.
damaged blades and worn bolts are major hazards.
• On multi-bladed appliances, take care as rotating one blade can cause other blades to rotate.
3) Operation
• Mow only in daylight or in good artificial light.
• Avoid operating the appliance in wet grass, where feasible.
• Always be sure of your footing on slopes.
• Walk, never run.
• For wheeled rotary mowers, mow across the face of slopes, never up and down.
• Exercise extreme caution when changing direction on slopes.
• Do not mow excessively steep slopes.
• Use extreme caution when reversing or pulling the appliance towards you.
• Never cut grass while walking backwards.
• Stop the blade(s) if the appliance has to be tilted for transportation when crossing surfaces other than grass, and when transporting the
appliance to and from the area to be mowed such as gravel drives, walks or roads.
• Never operate the appliance with defective guards or shields, or without safety devices, for example deflectors and/or grass catchers, in
place.
• Start the motor according to instructions and with feet well away from the blade(s).
• Do not tilt the appliance when starting the motor, except if the appliance has to be tilted for starting. In this case, do not tilt it more than
absolutely necessary and lift only the part which is away from the operator. Always ensure that both hands are in the operating position
before returning the appliance to the ground.
• Do not put hands or feet near or under rotating parts. For rotary mowers, keep clear of the discharge opening at all times.
• Never pick up or carry an appliance while the motor is running.
• Stop the motor:
- whenever you leave the machine;
- before clearing a blockage;
- before checking, cleaning or working on the appliance;
- after striking a foreign object. Inspect the appliance for damage and make repairs as necessary;
- if the appliance starts to vibrate abnormally (check immediately).
• Do not over-speed the mower or alter governor settings. Excessive speed is dangerous and shortens mower life.
4) Maintenance and storage
• Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working condition.
• Check the grass catcher frequently for wear or deterioration.
• Replace worn or damaged parts for safety.
• For cylinder mowers, be careful during adjustment of the appliance to prevent entrapment of the fingers between moving blades and fixed
parts of the appliance.
• Store the mower in a well-ventilated room away from naked flames such that may be found in hot water heaters.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising