MT10 23DL900A_.indd
OWNER'S MANUAL
Integrated Digital LCD TV
23'L900A
Owner's Record
You will find the model number and serial number on
the back of the TV. Record these numbers in the spaces
provided below. Refer to them whenever you call upon
your TOSHIBA dealer regarding this product.
Model number:
Serial number:
2012
Contents
Reference Section....................................................................26
Troubleshooting...................................................................26
Specifications.......................................................................27
License Information used with Toshiba Televisions...............28
Introduction................................................................................3
Welcome to Toshiba...............................................................3
Important Safety Instructions.................................................3
Installation........................................................................3
Use...................................................................................4
Service.............................................................................4
Cleaning.................................................................................4
Notes on discs.......................................................................5
Important information............................................................5
Getting started............................................................................7
Connecting an antenna...........................................................7
Exploring your new TV...........................................................7
Installing the remote control batteries..............................7
Effective range..................................................................7
Stand assembly instructions..................................................8
TV front and side panel controls............................................9
TV back panel connections...................................................10
Learning about the remote control.......................................11
Learning about the menu system.........................................13
Turning on the TV................................................................13
Switching on the TV.......................................................13
Switching off the TV.......................................................13
Initial Installation..................................................................13
Setting the programmes.......................................................14
General Control....................................................................15
Selecting programme positions......................................15
Switching between two programme positions................15
Stereo and Bilingual transmissions................................15
Time Display..................................................................15
Quick Access..................................................................15
Information.....................................................................15
EPG................................................................................15
Changing picture format.......................................................16
Using the TV's features (General)............................................17
Picture..................................................................................17
Sound...................................................................................17
Setup....................................................................................18
Applications..........................................................................19
Preferences..........................................................................19
Media Player.........................................................................19
Start Media Player..........................................................19
Viewing Photos..............................................................20
Playing Music.................................................................20
Watching Videos........................................................... 20
To close the Media Player...............................................20
DVD Playback.......................................................................21
Important Informations..................................................21
Starting Disc Playback....................................................21
Basic Playback Control...................................................21
Operations for Video Playback........................................21
DVD Setup Menu............................................................21
Connecting your TV..................................................................23
Connecting an HDMI or a DVI device...................................23
REGZA-LINK Connections....................................................24
Connecting a computer........................................................25
Connecting a USB Device.....................................................25
2
Introduction
7)
Never place the TV next to a stove where it will be
exposed to oil, smoke, or steam, or in a location where
there is a large quantity of dust.
This may cause a fire or an electric shock.
8)
Always place the TV on the floor or a sturdy, level,
stable surface that can support the weight of the unit.
To secure the TV, use a sturdy strap from the base
plate backside hook to a wall stud, pillar, or other firm
immovable structure. Make sure the strap is tight, secure,
and parallel to the floor.
Welcome to Toshiba
• Thank you for purchasing this Toshiba LCD Colour
Television. This manual will help you use the exciting
features of your new TV.
• Instructions in this manual are based on using the remote
control and not the buttons on the television.
• Please read all safety and operating instructions in this
manual carefully, and keep the manual for future reference.
Important Safety Instructions
Be sure to observe the following instructions and precautions to
ensure safe use of this TV.
Warning: To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the installation
instructions. See page 3.
At least 10cm
Hook
Installation
1)
Always connect the power plug to an appropriate
electrical outlet equipped with 220-240V, AC 50Hz.
Never use the TV outside the specified voltage range. It
may cause a fire or an electric shock.
2)
Never insert or remove the power plug with wet hands.
This may cause an electric shock.
3)
Never place the TV in an unstable location such as on a
shaky table, incline or location subject to vibration.
The TV may drop or fall off which may cause an injury
or damage.
4)
Never place the TV near a heater or in direct sunlight.
The surface of the cabinet or power cord may melt and
result in a fire or an electric shock.
6)
Never place the TV in an area exposed to high humidity
levels, such as in a bathroom or close to a humidifier.
This may cause a fire or an electric shock.
Base plate
backside hook
Hook
Screw
(not supplied)
Side view
Top view
Wall mounting of the TV should only be performed
by qualified serving personnel. Use only with the wall
bracket specified by the manufacturer.
1
Never block or cover the slots and openings in the
cabinet.
• Never place the TV so that it is facing upward or on
its side.
• Never place the TV in a closet, bookcase or other
similar area where the ventilation is poor.
• Never drape a newspaper, tablecloth or curtain on the
TV.
• When installing the TV against a wall, always keep
the TV at least 10cm away from the wall.
• Never place the TV on a soft unstable surface, such as
a carpet, or a cushion.
The inside of this TV will overheat if the ventilation
holes are covered, blocked or sealed, which may result in
a fire.
5)
Sturdy tie
(as short as possible)
1 9 ~ 10mm
Panhead Screw: advised
Roundhead screw: a washer is
required
Flathead screw: can not be used
metal masher
10mm
L ≥20mm
• The screw type is dependent on the actual mounting
surface. The metric thread size is 3.8-4.1mm
• Place the stand on a stable, level surface and secure
the TV set by using a single screw (not supplied)
through the fall prevention screw hole.
• Make sure to secure your TV set to a firm and
adequately thick surface.
3
9)
Precautions for moving the TV
When moving the TV, be sure to remove the plug from
the wall outlet and disconnect the antenna and audio/
video cables, as well as any steady ties.
Fire or electric shock may result if the power cord is
damaged.
When carry the TV, at least two people are needed. Be
sure to carry it upright.
Never carry the TV with the screen facing up or down.
10)
Precautions for installing an outdoor antenna
An outside antenna system should not be located in the
vicinity of overhead power lines, or other electric light or
power circuits.
If the antenna falls down or drop, it may cause injury or
electric shock.
Service
Use
1)
Never place hot objects or open flame sources, such as
lighted candles or nightlights, on or close to the TV.
High temperature can melt plastic and lead to fires.
2)
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquid, such as
vases, shall be placed on the apparatus.
When liquids are spilled or small items are dropped
inside the TV, this may cause a fire or an electric shock.
If small objects drop inside the TV, turn off the TV and
remove the power plug from the outlet immediately and
contact a service technician.
3)
Never insert objects (metal or paper) or pour water
inside the TV through ventilation holes or other
openings.
These items may cause a fire or an electric shock.
If these objects are inserted inside the TV, turn off the TV
and remove the power plug from the outlet immediately
and contact a service technician. Be specially careful that
children do not insert objects in the TV.
4)
Never stand or climb on the TV.
Be specially careful in households with children to
prevent them from climbing on top of the TV.
It may move, fall over, break, become damaged or cause
an injury.
5)
When the TV will not be used for a long period of time,
such as during vacation or travel, remove the power
plug from the wall outlet for safety.
• The TV is not completely disconnected from the
power supply line, as minute current is consumed
even when the power switch is turned off.
• The mains plug or an appliance coupler is used as the
disconnect device, therefore the disconnect device
shall remain readily operable.
6)
Never cut, break, modify, twist, bunch up or bend the
cord or apply excessive force or tension to it.
Never place heavy objects on the power cord or allow it
to overheat as this may cause damage, a fire or an electric
shock. Contact a service technician if the power cord is
damaged.
8)
If there is thunder or lightning, never touch the antenna
cable or other connected cables.
You may suffer an electric shock.
Never repair, modify or disassemble the TV by yourself.
It may cause a fire or an electric shock. Consult a service
technician for inspection and repair.
2)
When a malfunction occurs, or if smoke or an unusual
odour comes from the TV, turn off the TV and remove the
power plug from the outlet immediately.
Make sure that the smoke or smell has disappeared, then
contact a service technician. If the TV is still used in this
condition, it may cause a fire or an electric shock.
3)
If the TV is dropped or the cabinet is broken, turn off
the TV and remove the power plug from the outlet
immediately.
If the TV is still used in this condition, it may cause a fire
or an electric shock. If the cabinet is broken, be careful
when handling the TV to prevent an injury. Contact a
service technician for inspection and repair.
4)
When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the
TV.
Note:
The lamp unit contains a small amount of mercury.
Disposal of mercury may be regulated due to environmental
considerations.
Dispose of the used lamp unit by the approved method for
your area. For disposal or recycling information, please
contact your local authorities.
Cleaning
Avoid using chemicals (such as air refreshers, cleaning agents,
etc.) on or near the TV pedestal. Studies indicate that plastics
may weaken and crack over time from the combination effects of
chemical agents and mechanical stress (such as weight of TV).
Failure to follow these instructions could result in serious injury
and/or permanent damage to TV and TV pedestal.
Never pull on the power cord when removing the plug
from the wall outlet.
Always hold the plug firmly when removing it. If the
power cord is yanked, the cord may become damaged
and a fire or an electric shock may occur.
7)
1)
4
1)
Remove the power plug before cleaning.
Never use solvents such as gasoline or thinner to clean the
TV.
• These solvents may distort the cabinet or damage its
finish.
• If rubber or vinyl products remain in contact with the
TV for a long time, a stain may result.
If the cabinet becomes dirty, clean it with a soft, dry cloth.
When cleaning the surface of the LCD screen, wipe the
panel surface gently with a soft, dry cloth.
2)
Periodically disconnect the power plug from the outlet
and check it.
If dust has collected on the power plug connectors, clean
off the dust with a dry cloth.
The dust may cause a fire due to reduced insulation on the
plug.
Notes on discs
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM,
CD-ROM, Photo CD, etc., or non-standardized discs
even if they may be labelled as above.
• Some DVD-R/RWs and CD-R/RWs cannot be played
back depending on the recording conditions.
• This TV/DVD combo uses the PAL colour system,
and cannot play DVD video discs recorded in any
other colour system (NTSC, SECAM, etc.).
• This DVD module does not support 8cm discs.
• Please do not insert any discs of an irregular shape
into the TV/DVD combo, as it may interfere with the
function of the TV/DVD combo. You may not be able
to remove it.
• Please do not use after market accessories, such as a
ring protector, as this may cause trouble with the
operation of the TV/DVD combo.
THIS UNIT IS A CLASS 1 LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE
LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF
DIRECTED BE SURE TO OPERATE THE
PLAYER CORRECTLY AS INSTRUCTED.
• Do not touch the playback side of the disc.
• Do not attach paper or tape to discs.
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the centre outwards with a
soft cloth. Always keep the disc clean.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc.
1)
2)
Notes on region numbers
The region number of this TV/DVD combo is 4.
If region numbers, which stand for their playable area, are
printed on your DVD and you do not find
or
, disc
playback will not be allowed by the player. (In this case,
the TV/DVD combo will display a message on-screen.)
Some DVDs that have no region code label may still be
subject to area restrictions and therefore not playable.
Because of problems and errors that can occur during the creation
of DVD and CD software and/or the manufacture of DVD and
CD discs, Toshiba cannot assure that this TV/DVD combo will
successfully play every disc bearing the DVD and CD logos. If you
happen to experience any difficulty playing a DVD and/or CD disc
on this TV/DVD combo, please contact Toshiba Customer Service.
Playable discs
Using this TV/DVD combo, you can playback the following
discs. Some of these discs may be incompatible.
Important information
If a television is not positioned in a sufficiently stable location,
it can be potentially hazardous due to falling. Many injuries,
particularly to children, can be avoided by taking simple
precautions such as:
DVD Video disc (Digital Versatile Disc)
DVD R/RW (DVD Recordable/Rewritable), DVD R DL (Dual layer) of
DVD Video format or Audio/Video
• Using stands recommended by the manufacturer of the
television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the
supporting furniture.
CD-R (CD-Recordable)
Audio/Video formats (e.g., MP3,
JPEG
• Not placing the television on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television to a suitable support.
CD-RW (CD-Rewritable)
Audio/Video formats (e.g., MP3,
• Not standing the television on cloth or other materials
placed between the television and supporting furniture.
Audio CD (Compact Disc
Digital Audio)
• Educating children about the dangers of climbing on
furniture to reach the television or its controls.
Video CD
(Formats 1.0, 1.1, 2.0)
Place the TV on a stable, level surface that can support the
weight of the TV. In order to maintain stability and prevent it
falling over, secure the TV to the level surface using the strap
located under the table top stand, or, to a wall using a sturdy tie
to the clip on the back of the table top stand.
5
1)
2)
3)
4)
5)
6)
Trademark information
About LCD screen
• If you have the LCD screen facing to the sun, the LCD
screen will be damaged.
• Be aware of locating the TV in the place such as
window side or outside of the room.
•
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
About cabinet and LCD screen
Never spray volatile compounds such as insecticide on the
cabinet and LCD screen.
This may cause a discolouration or damage the cabinet and
LCD screen.
•
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
Some pixels of the screen do not light up
The LCD display panel is manufactured using an extremely
high level of precision technology, however, sometimes
some pixels of the screen may be missing picture elements
or have luminous spots. This is not a sign of a malfunction.
Note: Interactive video games that involve shooting a “gun”
type of joystick at an onscreen target may not work with
this TV.
•
DVB is a registered trademark of Digital Video
Broadcasting Project.
About interference
The LCD display may cause interference in image,
sound etc. of other electronic equipment that receives
electromagnetic waves (e.g. AM radios and video
equipment.)
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
•
About using under low temperature places
If you use the TV in a room of 0°C or less, the picture
brightness may vary until the LCD display warms up.
This is not a sign of a malfunction.
●
About afterimage
If a still picture is displayed, an afterimage may remain on
the screen, however, it will disappear soon. This is not a
sign of malfunction.
Exemptions
• Toshiba is not liable for any damage caused by fires, natural
disaster (such as thunder, earthquake, etc.), acts by third
parties, accidents, owner’s misuse, or uses in other improper
conditions.
• Toshiba is not liable for incidental damages (such as profit
loss or interruption in business, modification or erasure of
record data, etc.) caused by use or inability to use of product.
• Toshiba is not liable for any damage caused by neglect of
the instructions described in the owner’s manual.
• Toshiba is not liable for any damage caused by misuse or
malfunction through simultaneous use of this product and
the connected equipment.
6
is a trademark of DVD Format/Logo Licensing
Corporation.
THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NONCOMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE
AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NONCOMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION
MAY BE OBTAINED FROM MPEG LA, LLC.
SEE HTTP://WWW.MPEGLA.COM
Getting started
Cautions:
• Dispose of batteries in a designated disposal area. Batteries
must not be exposed to excessive heat such as sunshine, fire
or the like.
• Attention should be drawn to the environmental aspects of
battery disposal.
• Never mix battery types or combine used batteries with new
ones.
Connecting an antenna
Optimum reception of colour requires a good signal and will
generally mean that an outdoor antenna must be used. The
exact type and positioning of the antenna will depend upon
your particular area. Your Toshiba dealer or service personnel
can best advise you on which antenna to use in your area.
Before connecting the antenna cable, turn off all main power
switches.
Notes:
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace both batteries
with new ones.
• If the batteries are dead or if you will not use the remote
control for a long time, remove the batteries to prevent
battery acid from leaking into the battery compartment.
Outdoor antenna
Decoder
Effective range
TV back view
Media Recorder
(not supplied)
Antenna adaptor
(not supplied)
antenna
terminal
Plug
(not supplied)
terminal
Exploring your new TV
Installing the remote control batteries
Remove the battery cover.
Insert two AAA, 1.5V batteries matching the -/+ polarities of
the battery to the -/+ marks inside the battery compartment.
(Sample Illustration only)
7
Stand assembly instructions
Parts included in box
x1
Please take out the parts according
to the instruction printed on the box.
x5
CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD panel face down on a flat, cushionedsurface
such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble asindicated above.
Avoid using chemicals on or near TV pedestal or serious injury could result.
Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.
Warning: To prevent possible electric shock, protect the power cord from being pinched when attaching the pedestal stand.
8
TV front and side panel controls
You can operate your TV using the buttons on the TV control panel or the remote control. The back and side of the panel
provide the terminal connections to connect other equipment to your TV. (Refer to page 23 Connecting your TV)
Standby / On button
+/- control/volume buttons
Programme / Volume / AV Function
Eject button
HDMI 1
1
HDMI 2
2 USB port
Timer LED Window
3 Digital audio output
Power LED Window
4 Headphone jack
IR Window
Using the control buttons on the side of the TV:
Using the control panel on the front of the TV:
• To alter the volume, press + or -. If the volume does not
change, press
once and press + or - again.
• To alter the programme position, press + or -. If the
programme does not change, press
once and press +
or - again.
• To select an external input, press and hold the
button until the “Input Source” list is displayed. To select an
external input, press
repeatedly until the appropriate
input source is selected.
• To eject/insert the disc, press Eject button
/
IR Window
Point your remote control at this
area when selecting programme
position or adjusting the volume
level, etc.
Green LED: On Timer/EPG Timer
Timer LED Window On.
Red LED: Standby
Power LED Window Green LED: Power On
Using the terminals on the side panel:
1. HDMI 1 and HDMI 2: High-Definition Multimedia Interface
input receives digital audio and uncompressed digital video
from an HDMI device or uncompressed digital video from a
DVI device.
(Refer to page 23 Connecting an HDMI or a DVI device)
2. USB port: For use when inserting a USB device.
3. Digital audio output terminal: For use when connecting an
amplifier with coaxial type digital audio input.
4 Headphone jack: For use with headphones.
Notes:
• Please always refer to the owner’s manual of the equipment to
be connected for full details.
• Inserting the headphone plug will mute the sound from all
speakers.
9
TV back panel connections
Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the
wall socket.
5
6
7
8
5. AV terminal: Standard video and standard audio inputs
6. Component input terminals: For use when connecting a high-definition component video device with standard
audio output.
7. RGB/PC Input terminals: For use when connecting a computer. (Refer to page 25 Connecting a computer)
8. Antenna input terminal: Analogue TV/Digital DVB-T antenna signal input.
10
Learning about the remote control
Location of controls
Simple at-a-glance reference of your remote control.
1. For On/Standby mode.
2. To eject/insert the disc.
2
4
3. To toggle between ATV and DTV mode.
1
3
4. To toggle between TV and DVD mode.
5. Number buttons.
5
6. To return to the previous programme.
7. To select input from external sources.
8. To mute the sound.
6
7
8
10
12
9
11
13
10. To change the programme.
14
15
13. To display title menu.
9. To display DVD root menu.
11. To alter the volume.
12. To display Quick Access menu.
14. To display the programme guide.
15. To exit menus.
16
16.
18
19
21
22
24
25
26
30
29
33
To move up, down, left or right in the
on-screen menu.
17
19
20
21
23
OK: To confirm the selection.
17. To return to the previous level of the on-screen menu.
18. In DVD mode:
- To display on-screen menu when DVD is in playback;
- To display DVD menu when DVD is not in playback.
27
28
31
32
34
In TV mode: to display on-screen menu.
19. To do a forward/reverse search under DVD playback.
20. To start a DVD playback.
21. To skip to previous/next chapter or track.
22. To stop DVD playback.
23. To pause DVD playback.
Note: The blue letters above the buttons mean it is
available for DVD function.
11
24. Colour buttons: Text control buttons in TV mode.
Blue letter buttons in DVD mode:
PLAY MODE: To select a repeat play option
among Chapter, Title, All and Repeat Off;
ZOOM: To enlarge a picture;
SLOW: To do a slow forward.
25.
MARKER
26.
To reveal concealed text in TV mode.
To set a bookmark in DVD mode.
To hold a wanted page in TV mode.
REPEAT A-B To repeat playback from point A to B
on a disc in DVD mode.
27.
JUMP
28.
To enlarge text display size in TV mode.
To jump to the chapter/ track you like
in DVD mode.
To displayclock on TV screen in normal
picture mode.
To toggle between Teletext and normal
picture mode.
29. To call up Teletext services.
30. Still picture.
31. Stereo/Bilingual transmissions.
32. To turn the subtitle on/off.
33. In TV mode: To display on-screen information.
In Text mode: To access index page.
34. To switch the camera angle during playback.
12
Learning about the menu system
Turning on the TV
We suggest you familiarize yourself with the display charts
before using the menu system:
Switching on the TV
Connect the power cord to a wall outlet, the power indicator
lights in red (standby mode).
• Press MENU to display menu, then press ◄ or ► to select
main menu headings.
Press the button on the remote control or the
the TV set to turn on the TV.
• Press OK, then press ▲ or ▼ to select sub menu headings.
• Press OK, ◄ or ► to select the required choice. Follow the
on-screen instructions. (The functions of each menu are
described in detail throughout the manual).
Switching off the TV
Press the button on the remote control or the
button on
the TV set to switch to the standby mode.
Notes:
• This TV is not fully disconnected from the main supply, as
minute current is consumed even when the TV is turned off.
When the TV will not be used for a long period of time, such
as during vacation or travel, remove the power plug from the
wall outlet.
• If power is cut off while you are viewing the TV, the Last
Mode Memory function turns on the TV automatically when
power is applied again. If power is going to be off for a long
time and you are going to be away from your TV, unplug the
power cord to prevent the TV from turning on in your
absence.
• Press RETURN to return the previous lever of the on-screen
menu.
• If you want to close the menu, press EXIT.
TV menu chart
PICTURE
PICTURE menu
...
Picture Settings
Active Backlight Control
On
3D Colour Management
O
...
Base Colour Adjustment
PICTURE
SOUND
SETUP
APPLICATIONS
PREFERENCES
RETURN
Enter
OK
DNR
Low
MPEG NR
Low
Select
RETURN
Back
EXIT
Exit
SOUND menu
Initial Installation
SOUND
Dual
Dual1
Bass
0
Treble
0
SOUND
SETUP
APPLICATIONS
PREFERENCES
RETURN
Base Boost
OK
RETURN
EXIT
Adjust
Surround Sound
Select
Stable Sound
Back
Dynamic Range Control
Exit
On
...
Digital Audio Output
SETUP menu
SETUP
...
Channel Install
...
Channel Settings
...
Diagnostics
PICTURE
SOUND
SETUP
APPLICATIONS
PREFERENCES
RETURN
Automatic Power Down
Location
Select
System Information
RETURN
Back
Reset TV
...
EXIT
Exit
Enter
Software Upgrade
APPLICATIONS menu
SETUP
APPLICATIONS
Connect the mains plug and switch the TV on using the
side standby switch. Then the initial setup wizard will be
displayed. This wizard will appear the first time that the
television is switched on and each time the television is
reset.
2.
Press the OK button to start the wizard.
3.
Select your Region by pressing the or
press OK or to enter the next step.
4.
Select your location by pressing the or button, then
press OK or to enter the next step. The location options
include Home and Store.
APPLICATIONS
...
EPG
SOUND
1.
On
Home
...
...
OK
PICTURE
Before switching on the television put your decoder and
media recorder to Standby if they are connected and ensure
the antenna is connected to your television. To set up the
television, use the buttons on the remote control as described
on page 11.
0
Balance
PICTURE
button on
PREFERENCES
RETURN
Time Zone
As broadcaster
Country Region
NSW/ACT
...
Clock
Sleep Timer
OK
Enter
...
Demo
Select
RETURN
Back
EXIT
Exit
button, then
PREFERENCES
PREFERENCES menu
...
REGZA-Link Setup
Teletext
Auto
Panel Lock
Auto Format
On
4:3 Stretch
OK
PICTURE
SOUND
SETUP
APPLICATIONS
PREFERENCES
RETURN
Enter
Blue Screen
Select
Side Panel
RETURN
Back
EXIT
Exit
On
2
You can select either Home or Store mode.
• Press OK to enter the next step.
Note for menu system:
● If you do not make a selection for a while, the menu display
disappears automatically.
• Press
or
to select Scan, then press OK or
to
automatically start searching for all available channels.
13
Notes:
Press the or button to select Automatic Search and
press OK to enter. The options include Digital & Analogue,
Digital and Analogue. Use the or button to select one,
then press OK to start channel scan.
• Home is recommended for normal home use. Select
Store when using a TV for displaying in a shop, etc.
• The searching progress bar will move along the line.
Analogue Manual Scan
You must allow the television to complete the search.
5.
You can also skip the initial setup process by selecting Skip
Scan.
6.
During the setup, you can follow the hints available at
the bottom of the screen to return to the previous step by
pressing the ◄ button.
7.
Analogue Manual Scan
System
Australia
Search
44.00
Store Current Channel
Store
Store as New Channel
Store
After the initial setup finishes, press OK to display the
channel list.
Select
RETURN
Back
EXIT
Exit
Setting the programmes
Press the or button to select Analogue Manual Scan,
and press OK to enter. Use the or button to select your
System, then press the or button to select Search and
press OK to start channel scan. After scanning, select Store
Current Channel or Store as New Channel to store
selected channels.
1. Press MENU, use or to select SETUP, then press OK
to enter.
2. Select Channel Install by pressing the or button, then
press OK or to enter the next step. The channel install
options include Automatic Search, Analogue Manual Scan
and Digital Manual Tune.
Digital Manual Tune
Channel Install
Digital Manual Tune
Automatic Search
...
Analogue Manual Scan
...
Digital Manual Tune
...
Start Frequency (MHz)
0%
OK
Enter
Select
OK
RETURN
Back
EXIT
Exit
Automatic Search
Back
EXIT
Exit
Start Frequency (MHz)
0.00
Press the or button to select Digital Manual Tune,
and press OK to enter the next step. Use the number buttons
to input the frequency you want, then press OK to start
channel scan.
3. After searching, the menu will remain on the screen for 10
Automatic Search
Status: Scanning...
Analogue Channels: 0
Digital Channels: 5
seconds, then the TV will enter the channel you searched.
62%
EXIT
Select
RETURN
Press on the remote control to browse all channels
you searched.
4. Press RETURN to go back to the previous menu. Press
EXIT to exit.
Exit
14
General Control
Information
Selecting programme positions
The on screen information will give the details of the
channel programme currently being viewed.
1. Press
, the information screen will appear giving
details of the programme and event currently being
viewed.
2. Press
again to close the information screen.
After you have tuned the TV, you have several ways to navigate
through all programmes:
• Press the Number buttons (a channel number has 3 digitals)
and you may omit the leading zeroes, which will be appended
automatically; (Please note that if you have channels with
different frequencies but the same channel number, the TV
will always tune to the first channel that has been stored into
the channel database. To view the other duplicating channels,
you can select the channels by using the buttons.)
• Press to view the previous and next programme. The
channels are arranged in ascending order according to the
channel number.
• Press OK when there is no menu on the screen. The Channel
List will appear. You can use ▲ or ▼ to choose the
programme you want. Then, press OK to show the
programme.
EPG (Electronic Programme Guide)
• Display the Electronic Programme Guide for digital
channels by pressing GUIDE, and the TV guide will
appear as below.
Wednesday,20-Jan-2010,9:17:42
20-Jan-2010,9:17:42
Wednesday,
20/01/2010
20/01/2010
9:00
9:00
806 M6HD
M6HD
806
807 TF1
TF1HD
HD
807
808 TV
TVONE
ONE
808
809 TV2
TV2
809
810 TVNZ
TVNZ77
810
811 UU
811
10:00
10:00
BackatatMidday
Midday
Back
Mary,queen
queenofofshops
shops
Mary,
DealOr
OrNo
NoDeal
Deal
Deal
Infomertial
Infomertial
Pyt...
Pyt...
Hindsight
Hindsight
NewsSummary
Summary
News
Will&&Grace
Grace
Hustle
Will
Hustle
Journey
Noinformation
information
No
Journey
Goodmorning
morning
Good
TravelJournals
JournalsS
pr...
Travel
Spr...
BackatatMidday
Midday
Back
8:30-10:30 Wed,
Wed,20-Jan
20-Jan
8:30-10:30
Switching between two programme positions
Entertainment
Entertainment
(Noprogram
programdetails.)
details.)
(No
You can switch two programme positions without entering
actual position number each time.
Next day
Next day
Type filter
TypeQUICK
filter Add schedule
Schedule list
• Press or to navigate through different channels
and use or to navigate through different
programmes.
• Press the red button to list out the previous day's
programmes. Press the green button to list out the next
day's programmes.
• Press the yellow button to check detailed information,
if available, on a highlighted programme.
• To display the programme filter, press the blue button.
Use or to select Type.
• Press QUICK to bring up the schedule list menu. The
options include:
Channel Number: Select the channel you want to
watch.
Start Date: Set the watching date.
Start Time: Set the starting time of watching.
Repeat type: Set a repeat type for reminder.
Use / or / to select Add and press OK to add
the schedule into your schedule list. When the time
you set comes, a message will pop up to remind you to
switch to the scheduled channel.
1. Select the first programme position you want to view.
2. Select the second programme position with the Number
buttons (0-9).
3. Press , the previous channel will be displayed. Each time
you press
the TV will switch back and forth between the
two programme positions.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the word
Stereo or Dual will appear on the screen each time programme
positions are changed, disappearing after a few seconds. If the
broadcast is not in stereo the word Mono will appear.
Stereo: Press
to select Stereo or Mono.
Bilingual: Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the required
programme number and if the word Dual appears press
to select Dual 1, Dual 2 or Mono.
Time Display
The time display facility allows the current broadcasted time to
be seen on the television screen.
Press
on the remote control while watching a normal
television broadcast to see the time display from the
broadcaster. It will remain on screen for about 5 seconds.
• Press 0 to check all your schedule list information. If
you want to reedit or delete a schedule, use or to
select it and press OK to enter. Press the red button to
add more schedules.
Quick Access
Quick Access helps you access some options quickly such
as Picture Mode, Picture Size, Media Player and REGZALINK. Press the QUICK button to display the Quick Access
menu and press▲or▼ to select the option you’d like to change.
15
Changing Picture Format
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the QUICK button
and select Picture Size. Press OK to display the option list, including Wide, 4:3 Stretch, Super Live, 14:9, Subtitle, and Cinema.
Use the or button to select one format.
“Note: Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of
public display or commercial gain may infringe on copyright laws.”
Wide
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9 etc.)
black bars may be visible on the top
and bottom of the screen.
4:3 Stretch
Use this setting to view a true 4:3
broadcast.
Super Live
This stretches the left and right sides of
a normal picture (4:3 aspect ratio) to fill
the screen, without making the picture
appear unnatural. The top and bottom
of the picture are slightly cut off.
14:9
This zooms up the wide picture (14:9
aspect ratio) to the upper and lower
limits of the screen.
Subtitle
When subtitles are included on a
letterbox format broadcast, this setting
will raise the picture to ensure that all
the text is displayed.
Cinema
This zooms up the wide picture (16:9
aspect ratio) to the full screen.
16
Using the TV’s features (General)
DNR: selects an option from Off, Low, Middle and High.
Picture
MPEG NR: selects an option from Off, Low, Middle and
High.
Press MENU and select PICTURE by using the ◄ or ►
Press RETURN to go back to the previous menu.
button. Press OK to enter the PICTURE menu.
Press EXIT to exit.
PICTURE
Sound
...
Picture Settings
Active Backlight Control
On
3D Colour Management
O
Enter
DNR
Low
MPEG NR
Low
or
button.
SOUND
...
Base Colour Adjustment
OK
Press MENU and select SOUND by using the
Press OK to enter the SOUND menu.
Dual
Dual1
Select
Bass
0
RETURN
Back
Treble
0
EXIT
Exit
Balance
0
Base Boost
OK
Picture Settings: press OK to enter its submenu. The options
are as below.
Picture Mode: selects a suitable picture effect. The options
include Standard, Dynamic, Mild, User and Movie.
Back Light: sets the backlight level.
Adjust
Surround Sound
Select
Stable Sound
RETURN
Back
Dynamic Range Control
EXIT
Exit
Digital Audio Output
On
...
Dual: sets Dual1 or Dual2, if available, for an analogue TV.
Contrast: sets the lightness and darkness values of the picture.
Base: sets the base.
Brightness: sets the brightness value for the picture.
Treble: sets the treble.
Colour: sets the colour value for the picture.
Balance: sets the balance.
Tint: sets the tint of the colour.
Bass Boost: when turned on, enhances the depth of the sound.
Sharpness: sets the sharpness value.
Surround Sound: turns on or off the surround sound feature.
Black/White Level: sets the black/white level. The options
Stable Sound: when turned on, reduces the volume level
differences between channels.
include Off, Low, Middle and High.
Dynamic Range Control: enables or disables the dynamic
range control feature. (Only available in TV and HDMI
Cinema Mode: turns on or off the cinema mode.
Colour Temperature: press OK to display its submenu.
modes)
You can set Medium, Warm, Cool and User.
Digital Audio Output: press OK to enter its submenu.
Game Mode: turn on or off the game mode. (not available in
Audio Format: selects an audio format, PCM or Auto.
TV mode.)
Note: When in HDMI mode, the Audio Format option
Reset: press OK and confirm OK to restore all picture
is grayed out and set to PCM only.
settings to the default.
Audio Delay: sets to Auto or Manual for audio delay.
Active Backlight Control: enables or disables the active
Audio Delay Time (ms): sets the audio delay time.
backlight control feature.
Headphone Setting: this setting is used to set the sound
output when headphones are connected. Options include
Speaker link and Headphone level.
3D Colour Management: enables or disables the 3D colour
management feature. When set to On, the feature is enabled and
the Base Colour Adjustment is available.
Base Colour Adjustment: press OK to enter its submenu. You
Speaker
Link
can make adjustment for individual colours, Red, Green, Blue,
On
Yellow, Magenta and Cyan to suit personal preference. Or you
Off
can select Reset and press OK to restore all the colour
adjustment to the default.
17
Headphone
Speakers
Sound is output
+ is available.) No sound
(–
Sound is output
Sound is output
(Headphone level
+ is available.)
(–
menu is available.)
Press RETURN to go back to the previous menu.
Updating Wizard
Press EXIT to exit.
Updating......
Setup
38%
Press MENU and select SETUP by using the ◄ or ► button.
Please DO NOT unplug the USB dongle and turn off the TV set during firmware
updating!
Press OK to enter the SETUP menu.
SETUP
Channel Install
...
Channel Settings
...
...
Diagnostics
Automatic Power Down
When the updating process finishes, you can see the
On
Location
following message on the screen.
Home
Select
System Information
...
...
RETURN
Back
Reset TV
...
EXIT
Exit
OK
Enter
Software Upgrade
Updating Wizard
Please remove the USB device and restart the TV again.
Channel Install: allows you to install the channels.
Channel Settings: allows you to make channel settings like
Channel Skip, Channel Sort, Subtitle and Audio, and
Parental Control.
Diagnostics: shows the signal strength, signal quality,
frequency, service ID, network ID and network name. (Only
available in DTV mode)
Power
Automatic Power Down: turns on or off the automatic power
down feature. When set to On, the TV will turn into standby
if there is no operation for 4 hours. (Available when select
Home.)
Press the power button to turn the TV into standby and
again to restart the TV.
System Information: displays the system information such as
model name, version and serial number.
Location: selects the location, Home or Store.
Software Upgrade: allows you to upgrade the TV's software.
Press OK to enter its submenu.
USB Upgrade: plug a USB device stored with the new
Reset TV: press OK and confirm OK to reset all the TV
settings to the default. Then the initial setup wizard will
appear.
software to the TV first. Then press OK to display the
Press RETURN to go back to the previous menu.
following screen.
Press EXIT to exit.
Updating Wizard
1: “V0.23” update to “V0.24”
Are you sure to update the firmware?
Yes
No
Select
Next
EXIT
Exit
Use ▲ or ▼ to select "Yes" and press OK or ► to start
updating. The screen appears as below.
18
Applications
one-touch play and system standby function between CEC
devices.
Press MENU and select APPLICATIONS by using the ◄ or
► button. Press OK to display the APPLICATIONS menu.
Teletext: selects a teletext mode, Auto or LIST.
Panel Lock: when set On, the side panel buttons are locked.
APPLICATIONS
Auto Format: turn on or off auto format function.
...
EPG
Time Zone
As broadcaster
Country Region
NSW/ACT
4:3 Stretch: turn on or off 4:3 stretch function.
Blue Screen: When set On, the TV will appear as a blue screen
and the sound will be muted if no signal is received.
...
Clock
Sleep Timer
OK
Enter
Side Panel: when the picture format is 4:3 or 14:9, select a
kind of side panel to make viewing in bright or dark conditions
more comfortable.
...
Demo
Select
RETURN
Back
EXIT
Exit
Press RETURN to go back to the previous menu.
Press EXIT to exit.
EPG: goes to electronic programme guide.
Media Player
Time Zone: selects a time zone.
Country Region: selects a country region.
Start Media Player
Clock: allows you set the date, time, power on timer, power on
channel and power off timer.
• Plug in a USB device first.
Sleep Timer: sets a time for sleep timer.
• To display the Media Player window, press QUICK on the
remote control and select Media Player by pressing the ▲
or ▼ button.
Demo: only available in Store mode.
• Press OK to continue.
Note: the hint of TV's switching off will appear during the last
minute if power off timer or sleep timer is activated. Press
EXIT to keep the TV on and cancel TV's shutting down.
The following menu will be displayed automatically.
Note: either the power on timer or power off timer is activated,
the timer LED on the front cabinet will light up in green.
Media Player
Press RETURN to go back to the previous menu.
Press EXIT to exit.
Photo
Preferences
Music
Video
Press MENU and select PREFERENCES by using the or
button. Press OK to display the PREFERENCES menu.
Select
...
REGZA-Link Setup
Teletext
Auto
Panel Lock
Auto Format
Enter
Blue Screen
On
Select
Side Panel
2
RETURN
Back
EXIT
Exit
Enter
EXIT
Exit
Notes:
On
• Some USB compliant devices may not be supported.
4:3 Stretch
OK
OK
Supported file formats:
Photo: JPEG
Music: MP3
Video: AVI, MP4, TS
PREFERENCES
• If the USB device is not recognized after power off/on or
First Time Installation, first, plug the USB device out and
power off/on the TV set. Plug the USB device in again.
• Do not use a USB Hub.
REGZA-Link Setup: allows you to make REGZA-Link
settings. When CEC devices are connected to the HDMI
terminals, you can enable the REGZA-LINK function so that
• You must obtain any required permission from copyright
owners to use copyright content. Toshiba cannot and does
not grant such permission.
19
- Audio only: Select it and press OK, you can listen to
music with the screen turned off. Any key press will turn
on the screen.
5. Follow the instructions at the bottom of the TV to perform
relative functions.
• Depending on the file size and amount in your USB storage
device, it may take some time for loading to view. A message
will display on-screen when loading files from the USB
storage device.
• Some USB keys and USB products like digital cameras
or mobile phones are not fully compatible with USB 2.0
standard so they may not work with the Media Player.
Not all USB keys or devices are compatible with the USB
function. Not all above formats are supported. The encoding
formats of your files will determine whether or not they can
be used.
Watching Videos
To watch videos, if available.
1. Select Video in Media Player by using the ◄ or ►button,
then press OK to continue.
2. Press MENU to display the video menu. The options
include:
- Sort: Sort folders and videos by Type, modification Date
or Name.
- Parser: You can select Recursive to display all videos
stored in the USB device.
3. Use the ▲/▼/◄/► button to select a video.
4. Select a video, press OK to watch, and an automatic
playback begins from the selected video. Press MENU to
display the options which allow you to play or pause the
video, select different play modes, picture modes and picture
size settings.
5. Follow the instructions at the bottom of the TV to perform
relative functions.
• Non-supported characters will be replaced with a square
(□).
Viewing Photos
To display photos, if available.
1. Select Photo in Media Player by using the◄ or ► button,
then press OK to continue.
2. Press MENU to display the photo menu. The options
include:
- Sort: Sort folders and photos by modification Date or
Name.
- Parser: You can select Recursive to display all photos
stored in the USB device.
3. Use the ▲/▼/◄/► button to select a photo.
4. Select a photo, press OK to watch, and a slide show begins
from the selected photo. Press OK to pause the photo if you
want to rotate the paused photo. Press MENU to display the
options which allow you to play, pause or rotate the photo or
select different play modes and displaying effects, etc..
5. Follow the instructions at the bottom of the TV to perform
relative functions, then press OK to continue.
To close the Media Player
• Press EXIT on the remote control to close the Media Player.
Playing Music
To play music, if available.
1. Select Music in Media Player by using the or button,
then press OK to continue.
2. Press MENU to display the music menu. The options
include:
- Sort: Sort folders and music by Name, Genre, Artist or
Album.
- Parser: You can select Recursive to display all music
stored in the USB device.
3. Use the / / / button to select a music.
4. Select a music, press OK to play, and an automatic playback
begins from the selected music. Press MENU to display the
options which allow you to play or pause the music, select
different play modes, etc..
- Show lyrics: This option is available for the music with
lyrics. Select it and use the or button to turn on/off
lyrics synchronized display.
20
DVD Playback
Important Information
Unless otherwise stated, all operations described are based on
remote control use.
The blue silkscreen letters on the remote control are available
in DVD mode.
1. Press SLOW during playback to select the required speed:
1/2, 1/4, 1/8, 1/16 -(forward only). Sound will be muted.
2. Press PLAY
to return to normal speed.
Starting Disc Playback
You can fast forward or fast reverse a disc during playback
and select a desired search speed: 2x,4x,8x,16x,32x.
1. Turn on the TV.
2. Insert a disc into the DVD slot with the label facing front.
3. Press INPUT and select DVD by using the or button.
Press OK to confirm, then press PLAY to start playback.
1. During playback, press REV
/ FF
to select the
required speed (backward or forward).
2. Press PLAY to return to normal speed.
Input Source
You can repeat the playback of a specific segment within a
title or track. To do this, you must mark the start and end of
the segment you want.
TV
AV
1. During a disc playback, press REPEAT A-B at your
chosen start point.
2. Press REPEAT A-B again at your chosen end point.
The section will now repeat continuously.
3. To exit the sequence, press REPEAT A-B.
COMPONENT
HDMI1
HDMI2
PC
DVD
DVD Setup Menu
In DVD mode, stop disc playback. Press SETUP MENU on
the remote control, DVD setup menu will display on the TV
screen.
Note: In some situation, the DVD playback will start
automatically when you insert the disc in the slot.
Basic Playback Control
1. During playback, press PAUSE to pause playback and
display a still picture. Sound will be muted. To resume normal
playback, press PLAY or OK.
2. Press SKIP
/ SKIP
to go to the previous or next
chapter/track during playback.
3. Press
to display the disc information for Title/Chapter/
Track.
4. Use the number buttons to enter valid chapter/track number
directly. The playback skips to the selected chapter/track.
5. Press STOP to stop during playback.
Operations for Video Playback
Use
or
/
or
Default
Parental
Password
Spdif Output
This function allows you to enlarge the picture on the TV
screen and to pan through the enlarged picture.
1. During playback, press ZOOM repeatedly to display the
pictures with different scales.
2. Press ZOOM repeatedly to return to the original size.
21
to select your desired language.
Preference
OSD Lang
Audio
Disc Menu
Subtitle
Language
1. Use cursors or number buttons on the remote control to
select a playback feature or item, then press OK to start
playback.
2. Press MENU to access or remove the menu.
/
Language
Use
Depending on the disc, a menu may appear on the TV screen
once you load in a disc and press INPUT then select DVD.
/
Eng
Eng
Eng
Eng
/
English
French
Spanish
Italian
German
to set your preference.
Preference
Reset
Use
/
or
/
to change password.
Language
Default
Parental
Password
Spdif Output
Preference
Change
The default password from the factory is 0000.
Language
Preference
Change
Old Password
New Password
Confirm PWD
22
Connecting your TV
Connecting an HDMI or a DVI device
The HDMI input on your television receives digital audio
and uncompressed digital video from an HDMI source device
or uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital
Content Protection) programme material in digital form from
EIA/CEA-861-D compliant consumer electronic devices (such
as a set-top box or DVD player with HDMI or DVI output).
HDMI
Input
Sockets
(Black)
Notes:
• When turning on your electronic components, turn on the TV
first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.
• Some early HDMI equipment may not work properly with
your latest HDMI TV.
HDMI device
• Supported Audio format: Linear PCM, sampling rate
32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo (
).
Notes:
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• To view the HDMI device video, press the
HDMI1 or HDMI2.
button to select
23
REGZA-LINK Connections
To Connect a DVI Device
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI terminal.
Note: The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
Notes:
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
The basic functions of connected audio/video equipment can
be controlled using the television's remote control if a REGZALINK compatible device is connected.
• An HDMI-to-DVI adaptor cable transfers video only.
HDMI
Input
Sockets
The back of your television
AV amplifier
HDMI in
HDMI to DVI
Adapter Cable
(not supplied)
HDMI out
Playback equipment
HDMI out
Playback equipment
HDMI out
Notes:
•
It is recommended that for correct operation all audio/video
devices are connected using HDMI cables branded with the
HDMI logo (
). If several devices are connected,
the REGZA-LINK feature may not operate properly. After
connecting the equipment use the REGZA-LINK menu to
setup the desired options. The connected equipment must
also be set. For details see the operation manual for each
connected device.
• The REGZA-LINK feature uses CEC technology as
regulated by the HDMI standard. This feature is limited to
models incorporating Toshiba's REGZA-LINK. However,
Toshiba is not liable for those operations. Refer to
individual instruction manual for compatibility information.
24
Connecting a USB Device
Connecting a Computer
Notes:
To Connect a Computer
With either an RGB/PC or an HDMI connection, you can
watch your computer’s display on the television.
• You can connect a USB device to your TV by using the
USB port of the TV. This feature allows you to display/play
music, photo or video files stored in a USB device.
When connecting a PC to the PC input on television, use an
analogue RGB (15-pin) computer cable.
• It is possible that certain types of USB devices (e.g. MP3
players) may not be compatible with this TV.
PC VGA Cable
(Not supplied)
• You may back up your files before making any connections
to the TV set in order to avoid any possible data loss.
Note that manufacturer will not be responsible for any file
damage or data loss.
• Do not pull out the USB device while playing a file.
Or
CAUTION: Quickly plugging and unplugging USB devices
is a very hazardous operation. Especially, do not repeatedly
quickly plug and unplug the devices. This may cause physical
damage to the TV and especially the USB device itself.
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. To display the optimum picture,
use the PC setting feature.
USB Device Connection
Plug your USB device to the USB port of the TV.
Notes:
• Some PC models cannot be connected to this television. An
adaptor is not needed for computers with a compatible mini
D-sub 15-pin terminal.
USB Device
• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multiangle scenes.
25
Reference Section
Troubleshooting
Why is the VCR/DVD picture in black and white?
● Check the correct input has been AV or COMPONENT.
Before calling a service technician, please check the following
table for a possible cause of the symptom and some solution.
Why did TV turn off by itself?
● After roughly 15 minutes without any input video signal
in TV mode, the TV will turn off to save power.
Symptom and solution
Why is there no sound or picture?
●
Why doesn’t the DVD playback start?
● No disc is loaded.
● The disc may be dirty. Clean the disc.
● The disc format is not supported.
Check that the television is on and that all connections
are made properly.
Why doesn't the video/DVD being played show on-screen?
●
Make sure the VCR or DVD player is connected to the
television, then select the correct input by pressing
Why is there no sound or picture during DVD playback?
● The TV is not in DVD mode. (No picture)
● If an external speaker is connected, check its volume
control.
.
.
Why is there a good picture but no sound?
●
Check all cable connections and that the volume has not
Why is picture distorted during fast reverse/forward when
DVD is played?
● The picture will be distorted occasionally. This is normal.
been turned down or that the sound has not been muted.
Why doesn't the remote control work?
●
Check that the batteries aren't dead or inserted
Why is there no subtitle during DVD playback?
● The disc has no subtitle encoded on it.
● Subtitles are disabled. Press the SUBTITLE button to set.
incorrectly.
Why are there problems with text?
●
Why can’t the scene angle be changed when DVD is played?
● The disc has no multi-angle scenes.
● The function is not applicable to the disc or to the current
mode.
Good performance of the text depends on a strong
broadcast signal. If the text is unreadable or garbled,
check the antenna, satellite or cable connection. Go to
the main index page of the text service and look for the
User Guide. This will explain the basic operation of
Why are DVD playback features failed?
● The playback features such as stopping, searching, slow
motion play, repeat play or programmed play, etc. are not
applicable to all discs.
text in some detail.
Why are the four coloured text numbers visible but no text?
●
Text has been selected while viewing an external source.
Why doesn’t the DVD playback start when the title is
selected?
● The disc may not be compliant with the “Parental”
setting.
No text will appear on screen or a box may appear
stating no information is available. Select a broadcasting
channel and press
to access.
Why don’t the devices connected via HDMI operate
properly?
● Make sure to use cables with the HDMI logo. Some early
HDMI equipment may not work properly with the latest
HDMI TV products, due to adoption of new standards.
Why the audio sound track and/or subtitle language cannot
be changed when DVD is played?
● The disc has no multi-language option encoded on it.
26
Specifications
Aspect ratio
Model
Visible size (diagonal)
16:9
58.5cm
23DL900A
Number of pixels
Power source
~220-240V
1920(H) x 1080(V) dots
50Hz
Sound output (at 10% distortion)
Power consumption
45W
3Wx2
Input/Output terminals
Standby (approx)
< 0.5W
Antenna Input: 75 Ω RF Input
Composite Input:
Dimensions (includes foot stand)
Video: RCA, CVBS
379.5mm(H) 552.3mm(W) 165.1mm(D)
Audio: RCA, L/Mono+R
Mass (Weight)
Component Input:
: 3.9kg
Video: RCA, Y, PB/CB, PR/CR
Analogue TV system (Antenna input)
Audio: RCA, L/Mono+R
Channel coverage:
PAL B/G
(CCIR)
VHF
UHF
27 ~ 69
CATV
C2, C10, C31,
HDMI Input (type A): 19pin, A/V Digital
0 ~ 12
RGB/PC Input:
Mini D-sub: 15 pin, Analogue RGB
USB port: USB 2.0
S2 ~ S44
Flash Drive thickness: 9mm (max.)
Digital TV System
Media Player Interface:
Compliant Standard: DVB-T
Version: USB 2.0
Video Decoding: MP @ ML & MP @ HL
USB class: Mass Storage
Audio Decoding: Dolby® Digital MPEG (1 & 11)
File system: FAT16 and FAT32
Audio Sampling Rate: 32, 44.1, 48 kHz
Digital Audio Output: Coaxial (Bitstream/PCM)
Headphone jack: 3.5mm (Diameter) stereo
Digital TV Terrestrial Tuner / Demodulator
Frequency: 51~858 MHz
Operation condition
Temperature: 0˚C - 35˚C (32˚F - 94˚F)
Bandwidth: 7 MHz/8MHz
Humidity: 20% - 80% (No moisture condensation)
Demodulator: COFDM
FFT Mode: 2K/8K
Wall mount information
Constellation: QPSK, 64 QAM
VESA (100mm x 100mm, M4)
Guard Interval: 1/8, 1/16
Supplied accessories
Inner Coding Rate: 2/3, 3/4
Owner's manual (1)
Remote control (1)
Batteries (2)
Registration card (1)
480i, 480p, 576i, 576p, 720p (50/60 Hz), 1080i (50/60Hz)
Warranty card (1)
Stand installation sheet (1)
(These signal formats are converted to match the number
Pedestal screws (5)
Component video input terminals (the signal format)
of pixels of the LCD panel.)
● Design and specifications are subject to change without
Composite colour system (analogue TV system)
notice.
PAL, SECAM, NTSC 3.58/4.43
● Never service or remodel the TV by yourself. If may
expose you to a fire hazard or dangerous voltages.
27
License Information used with Toshiba Televisions
The software pre-installed in the TOSHIBA Digital Televisions consists of multiple, independent software components. Each
software component is copyrighted by TOSHIBA or a third party.
The TOSHIBA Digital Televisions use software components that are distributed as freeware under a third-party end-user
license agreement or copyright notice (hereinafter referred to as a "EULA"). Some EULAs require that the source code of the
applicable component be disclosed as the condition for distributing the software component in executable format.
You can check the software components subject to such EULA requirements on the following Home Page:
URL: http://www.mytoshiba.com.au
In addition, some of the software components which are used in Toshiba Digital Televisions include the software that are
made or developed originally by TOSHIBA. These software and accompanied documents are copyrighted by TOSHIBA, and
protected by Copyright Act, an international treaty's articles and other governing laws. The software components which are
made or developed originally by TOSHIBA and not subject to EULAs are not a target of source code offering.
The Toshiba warranty provided in respect of the Digital TV is the only warranty provided and no additional warranties are
provided in respect of the software components subject to EULAs.
Some of the software components distributed under EULAs are made available for use by the user on the premise that they
are not copyrighted or warranted by TOSHIBA or any third party. These software components are licensed to the user free of
charge and therefore not covered by any warranty within the scope of the applicable laws. These software components are
provided in "as is" condition without any warranty, whether express or implied. "Warranty" here includes, but not limited to, an
implied warranty for marketability or fitness for specific uses. All risks associated with the quality or performance of these
software components are assumed by the user. TOSHIBA shall not be liable whatsoever for any cost of repair or correction or
other incidental expense incurred in connection with a defect found in any of these software components. Unless specified
under the applicable laws or in a written agreement, a party who changes or redistributes the software with consent from the
copyright holders or based on the aforementioned licenses shall not be held liable whatsoever for any loss arising from the
use of or inability to use such software components. The same applies even when the copyright holders or relevant third
parties have been informed of the possibility of such loss. "Loss" here includes normal, special, incidental and indirect loss
(including, but not limited to, the loss of data or its accuracy; loss incurred by the user or any third party; and interface
incompatibility with other software). Please read each EULA for details on the use conditions and items that must be observed
regarding these software components.
The table below lists the software components pre-installed in the TOSHIBA Digital Televisions, which are subject to EULAs.
The user should read the applicable EULAs carefully before using these software components. The EULAs are exhibited in
their original text (English) as exactly written by the respective parties other than TOSHIBA.
Pre-Installed Software
freetype
zlib
Unicode
png
EULA (refer to website for details)
http://www.freetype.org/FTL.TXT
http://www.zlib.net/zlib_license.html
http://source.icu-project.org/repos/icu/icu/trunk/license.html
http://www.libpng.org/pub/png/libpng.html
28
72-MT10AN-AUN1E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising