Frequency converters FVC1K series

Frequency converters FVC1K series
Frequency converters FVC1K series
High-power technology



















Single or three-phase output with neutral
powers from 5KVA up to 300KVA
output frequency 40 - 200Hz, 15 – 80Hz, 200 –
350Hz, 350 – 450Hz
connectable in parallel over 1MVA
reduced sizes and high performance
output voltage on request
high bandwidth
overload capability up to 200% for 1’
multi-scale systems
access to PID adjustment parameters
easy to use, easy maintenance and calibration
precision better than 1%
low harmonic distortion
insulated output
software for PC control
Typical applications
Conversion 50/60/400Hz
Devices and equipments tests with power supply different
from the grid
Trafo, coils and cores tests
Avionics
Description and applications
The converters of the FVC series are robust,
economical, easy to use static equipments. Developed
for intensive use on production lines are ideal for
research and development laboratories. They provide a
symmetrical and balanced sinusoidal three-phase system
with the possibility of continuously varying voltage and
frequency output. They are designed to work on
unbalanced loads up to 100% with possibility of feeding
single-phase loads by connecting one phase and neutral
or two phases. The power range goes from 5KVA up to
300KVA with the possibility of parallel up to over 1MVA
with output voltages ranging from 200V up to 1000V L L. The possibility of having two scales selectable to suit
different power requirements allows to have the
maximum adaptation to the load without penalizing the
output power. Equipped with a modern and simple user
interface which makes setup and parameter readings
very simple and intuitive. They are realized in table rack
(low powers), in wheeled cabinet (medium powers) or
cabinet.
Programmable via serial RS485 optional USB, LAN or
optic fiber. 4 digital I / O and 4 analog I / O they
guarantee a perfect integration with automatic test lines.
The output voltage can be regulated with continuity from
0 to the maximum value, as well as the frequency from its
minimum value to the maximum value with steps of 0.01
Hz. All devices are equipped with "sensing" for the
compensation of the drop along the cables (up to 10% of
the F.S.). They bear abrupt load variations with typical <2
mS recovery times for load variations of 50%.
All the equipments can be fitted with regenerative module
allowing use in a bidirectional way with grid input of
energy.
The range includes models for use in 40-200HZ generic
power, models up to 450Hz for use in avionics and 15Hz
models for use in the railway sector.
The FVCM series also lends itself as THREE ONE
PHASE converter.
ZENONE ELETTRONICA Srl
Tel: +39 0825449171 Fax: +39 0825407907
info@zenoneelettronica.it www.zenoneelettronica.it
Frequency converters FVC1K series
High-power technology
Main features
Measures
Output features
Output voltage
Minimum regulated voltage
Waveform
Accuracy
Number of scales
Output frequency
Frequency resolution
Frequency accuracy
Line regulation
Load regulation
Linearity
DC offset
Max output ripple HF
Maximum power
Output connections
Overload
Number of phases
Bandwidth
Max THD at 50-60Hz
Maximum time in overload
Recovery time for load variation
of 50%
Maximum voltage recovered
from sensing
Cos φ of the load
Conversion efficiency
100V ÷ 1000V L-L
0V
Sinusoidal
Tip. 1% F.S.
1 standard / 2 optional
BF: 40 ÷ 200Hz,
MF: 200 ÷350Hz;
HF: 350 ÷ 450Hz;
LF: 15 ÷ 80Hz
0.01Hz
0.15%
Typ 1% F.S.
Typ 1% F.S.
0.5% F.S.
0%
Typ 0.5%F.S.
300KVA,
parallelable over 1MVA
Internal terminals or CEE
socket
120% standard,
optional 200%
Models T: 3 + N,
models M 1
Depends on the model
Typ 0.5%
1 minute
Tip. 2mS
10% f.s.
0.2 ÷ 1
>95%
Voltage
current
Power
Accuracy
On the three phases
On the three phases
On the three phases
1% F.S.
Controls on the front
Run/stop
Voltage setting
Frequency setting
other
Supply
Line voltage
Frequency
Cosphi
Line protection
Connections
buttom
potentiometer
potentiometer
Main switch, emergency, views
400V 3F ± 10%
45 ÷ 65Hz
Typ 0.85
Automatic switch
Internal
Other
Dimensions
According to the model 19” rack
or cabinet
According to the model
Internal or on CEE socket
5 ÷ 40°C
-5 ÷60°C
IP20
Forced air
Typ 65dbA
CE (EMC and LVDT)
Weight
Output connections
Operating temperature
Storage temperature
Protection
Cooling
Noise a 1mt
Safety and EMC
Insulation
Line / output / GND
Output / GND
Maximum output voltage
applicable / GND
2500Vrms
1500Vrms
It depends on the output voltage
Interfaces
Communication
RS485
Optional USB,LAN, Optic fiber
2, 24V NPN + emergency circuit
2, 24V PNP
2, 0 ÷ 10V
2, 0 ÷ 10V
Digital inputs
Digital outputs
Analog inputs
Analog outputs
Iout
SC1
Characteristic
Vout and Iout
in multiscales
of
SC2
Principled and modulation schemes
ZENONE ELETTRONICA Srl
Tel: +39 0825449171 Fax: +39 0825407907
info@zenoneelettronica.it www.zenoneelettronica.it
0
Vout
Frequency converters FVC1K series
High-power technology
Avilable
powers
5KVA
10KVA
15KVA
20KVA
30KVA
50KVA
75KVA
100KVA
150KVA
200KVA
300KVA
Available
standard
voltages
150V
300V
500V
700V
900V
1000V
Double
scale
150/300V
250/500V
350/700V
450/900V
500/1000V
Other
voltages on
request
Options / Finishings on request
/M-FVC-SW
Software GImanager
/PCR
Interface for parallel
/LAN
LAN interface
/FIB
Optic fiber interface
/Sout
Access to particular output (specify)
/USB
USB interface
/Cons
Separate control unit (3 mt cable)
Modular assembly for easy
maintenance
Available designs
Table Rack
Wheeled Cabinet
Cabinet
ZENONE ELETTRONICA Srl
Tel: +39 0825449171 Fax: +39 0825407907
info@zenoneelettronica.it www.zenoneelettronica.it
Frequency converters FVC1K series
High-power technology
Frontal
Software FVCmanager
Other Zenone Elettronica products
• Current Sources GI1K series
• Pulsed Current Sources GI1K xxx SI series
• Current Sources GIS1K series with bandwidth from DC up to 2.5KHz
• Single-phase voltage sources GV1K series
• Single-phase voltage sources GTS1K series with bandwidth from DC up to 2.5KHz
• Fast Power Supplies AL3000 and AL3000R series with voltages from 10V to 1200V, currents up to 10KA
and power ratings from 10KW to 1MW
• Fully bidirectional R Models
ZENONE ELETTRONICA HISTORY
Founded in 1990 in Mirabella Eclano (AV) by a staff with high experience in the power electronics sector, Zenone
Elettronica has quickly become a leader in the development and manufacture of power electronics with a high
technological level, focusing on testing equipments for measurement laboratories and production lines
ORDERS INFORMATIONS
ZENONE ELETTRONICA Srl
Tel: +39 0825449171 Fax: +39 0825407907
info@zenoneelettronica.it www.zenoneelettronica.it
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising