SMT Power Inductor
Features
RoHS compliant.
Low profile (2.3mm max. Height) SMD type.
Unshielded.
Self-leads ,suitable for high density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters inductor applications.
are available to meet your exact requirements
Mechanical Dimension :
RECOMMENDED PAD PATTERNS
4.0
C B
A
5.2
1.0
D
Electrical Characteristics :
25 o
C, 100KHz, 0.1V
PART NO.
SI523 - 3R9
SI523 - 4R7
SI523 - 8R2
SI523 - 100
SI523 - 150
SI523 - 220
SI523 - 470
(uH)
3.9
4.7
8.2
10.0
15.0
22.0
47.0
DCR
( ) MAX
0.068
0.087
0.150
0.195
0.260
0.383
0.750
Irated
(Adc)
2
1.60
1.45
1.10
1.00
0.90
0.67
0.44
1. Tolerance of inductance: 15% for 3.9~8.2uH, 10% for 10~47uH.
2. Irated is the DC current which cause the inductance drop less than 10% of its nominal inductance
without current and the surface temperature of the part increase less than 45 o C.
3. Operating temperature : -20 o C to 105 o C (including self-temperature rise).
UNIT:mm/inch
C = 2.3/0.091 Max.
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991 http://www.deltaww.com
3