HMC995LP5GE
HMC995LP5GE
v00.0611
Amplifiers - Linear & Power - SMT
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Typical Applications
Features
The HMC995LP5GE is ideal for:
Intergrated Power Detector
• Point-to-Point Radios
Saturated Output Power: 35.5 dBm @ 24% PAE
• Point-to-Multi-Point Radios
High Output IP3: 41 dBm
• VSAT & SATCOM
High Gain: 27 dB
• Military & Space
DC Supply: +5V to +7V @ 1200 mA
No External Matching Required
Functional Diagram
General Description
The HMC995LP5GE is a 4 stage GaAs pHEMT MMIC
2 Watt Power Amplifier with an integrated temperature
compensated on-chip power detector which operates
between 12 and 16 GHz. The HMC995LP5GE provides
27 dB of gain, 35.5 dBm of saturated output power,
and 24% PAE from a +7V supply. The HMC995LP5GE
exhibits excellent linearity and is optimized for high
capacity digital microwave radio. It is also ideal for
13.75 to 14.5 GHz Ku Band VSAT transmitters as
well as SATCOM applications. The HMC995LP5GE
amplifier I/Os are internally matched to 50 Ohms
and is packaged in a leadless QFN 5x5 mm surface
mount package and requires no external matching
components.
Electrical Specifications
TA = +25° C, Vdd = Vdd1 = Vdd2 = Vdd3 = Vdd4 = Vdd5 = +7V, Idd = 1200 mA [1]
Parameter
Min.
Frequency Range
Gain [3]
24
Gain Variation Over Temperature
Typ.
Max.
Units
12 - 16
GHz
27
dB
0.03
dB/ °C
Input Return Loss
9
dB
Output Return Loss
15
dB
34.5
dBm
35.5
dBm
41
dBm
1200
mA
Output Power for 1 dB Compression (P1dB)
32
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)[2]
Total Supply Current (Idd)
[1] Adjust (Vgg1=Vgg2=Vgg3) between -2 to 0V to achieve Idd = 1200mA typical.
[2] Measurement taken at +7V @ 1200mA, Pout / Tone = +22 dBm
[3] Board loss subtracted out
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Broadband Gain &
Return Loss vs. Frequency
Gain vs. Temperature [1]
15
S21
S11
S22
5
30
26
-5
22
-15
18
-25
10
11
12
13
14
15
FREQUENCY (GHz)
16
17
18
12
13
15
16
Output Return Loss vs. Temperature
0
0
+25C
+85C
-40C
-5
RETURN LOSS (dB)
-5
-10
-15
-20
-10
-15
+25C
+85C
-40C
-20
-25
-25
-30
12
13
14
15
16
12
13
FREQUENCY (GHz)
14
15
16
15
16
FREQUENCY (GHz)
P1dB vs. Temperature
P1dB vs. Supply Voltage
40
40
+25C
+85C
-40C
38
5V
6V
7V
38
36
P1dB (dBm)
P1dB (dBm)
14
FREQUENCY (GHz)
Input Return Loss vs. Temperature
RETURN LOSS (dB)
+25C
+85C
-40C
34
GAIN (dB)
RESPONSE (dB)
25
Amplifiers - Linear & Power - SMT
38
35
34
36
34
32
32
30
30
28
28
12
13
14
FREQUENCY (GHz)
15
16
12
13
14
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
2
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
40
38
38
36
36
Psat (dBm)
Psat (dBm)
Psat vs. Supply Voltage
40
34
32
34
30
28
28
12
13
14
15
16
12
13
FREQUENCY (GHz)
P1dB vs. Supply Current (Idd)
15
16
15
16
Psat vs. Supply Current (Idd)
40
40
38
38
1000 mA
1100 mA
1200 mA
36
Psat(dBm)
36
34
34
32
32
30
30
28
1000 mA
1100 mA
1200 mA
28
12
13
14
15
16
12
13
FREQUENCY (GHz)
Output IP3 vs.
Supply Current, Pout/Tone = +22 dBm
48
48
46
46
44
44
42
42
40
38
+25C
+85C
-40C
36
14
FREQUENCY (GHz)
IP3 (dBm)
IP3 (dBm)
14
FREQUENCY (GHz)
Output IP3 vs.
Temperature, Pout/Tone = +22 dBm
1000 mA
1100 mA
1200 mA
40
38
36
34
34
32
32
30
30
12
13
14
FREQUENCY (GHz)
3
5V
6V
7V
32
+25C
+85C
-40C
30
P1dB (dBm)
Amplifiers - Linear & Power - SMT
Psat vs. Temperature
15
16
12
13
14
15
16
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Output IM3 @ Vdd = +5V
48
80
46
70
44
60
IM3 (dBc)
42
IP3 (dBm)
12 GHz
13 GHz
14 GHz
15 GHz
16 GHz
40
5V
6V
7V
38
36
50
40
30
20
34
10
32
30
0
12
13
14
15
16
10
12
14
16
FREQUENCY (GHz)
80
70
70
60
60
50
50
40
12 GHz
13 GHz
14 GHz
15 GHz
16 GHz
20
10
22
24
20
22
24
40
30
12 GHz
13 GHz
14 GHz
15 GHz
16 GHz
20
10
0
0
10
12
14
16
18
20
22
24
10
12
14
16
Pout/TONE (dBm)
Power Compression @ 15 GHz
40
40
30
Pout (dBm), GAIN (dB), PAE (%)
Pout
Gain
PAE
35
25
20
15
10
5
0
-10
18
Pout/TONE (dBm)
Power Compression @ 13 GHz
Pout (dBm), GAIN (dB), PAE (%)
20
Output IM3 @ Vdd = +7V
80
IM3 (dBc)
IM3 (dBc)
Output IM3 @ Vdd = +6V
30
18
Pout/TONE (dBm)
Amplifiers - Linear & Power - SMT
Output IP3 vs.
Supply Voltage, Pout/Tone = +22 dBm
-8
-6
-4
-2
0
2
4
6
INPUT POWER (dBm)
8
10
12
14
35
Pout
Gain
PAE
30
25
20
15
10
5
0
-10
-8
-6
-4
-2
0
2
4
6
8
10
12
14
INPUT POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
4
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Detector Voltage vs. Frequency &
Temperature
Reverse isolation vs. Temperature
0
12.5 GHz +25C
12.5 GHz +85C
12.5 GHz -40C
15.5 GHz +25C
15.5 GHz +85C
15.5 GHz -40C
1
+25C
+85C
-40C
-20
ISOLATION (dB)
Vref-Vdet (V)
-10
0.1
-30
-40
-50
-60
-70
-80
0.01
-5
3
11
19
27
-90
35
11
OUTPUT POWER (dBm)
13
14
15
16
17
Gain & Power vs.
Supply Voltage @ 14 GHz
40
Gain (dB), P1dB (dBm), Psat (dBm)
50
35
30
25
GAIN
P1dB
Psat
20
15
1000
12
FREQUENCY (GHz)
Gain & Power vs.
Supply Current @ 14 GHz
Gain (dB), P1dB (dBm), Psat (dBm)
Amplifiers - Linear & Power - SMT
10
45
GAIN
P1dB
Psat
40
35
30
25
20
1050
1100
1150
1200
5
Idd (mA)
5.5
6
6.5
7
Vdd (V)
Power Dissipation
POWER DISSIPATION (W)
12
10
8
6
13 GHz
14 GHz
15 GHz
4
2
0
-10
-8
-6
-4
-2
0
2
4
6
8
10
INPUT POWER (dBm)
5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Drain Bias Voltage (Vdd1-5)
+8V
RF Input Power (RFIN)
Channel Temperature
Typical Supply Current vs. Vdd
Vdd (V)
Idd (mA)
+24 dBm
5
1200
150 °C
6
1200
7
1200
Continuous Pdiss (T= 85 °C)
(derate 137 mW/°C above 85 °C)
8.9 W
Thermal Resistance
(channel to gnd paddle)
7.3 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Note: Amplifier will operate over full voltage ranges shown
above Vgg adjusted to achieve Idd = 1200 mA
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Amplifiers - Linear & Power - SMT
Absolute Maximum Ratings
6
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Amplifiers - Linear & Power - SMT
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER
50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC995LP5GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL3
[2]
Package Marking [1]
H995
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Pin Descriptions
Function
Description
1-3, 9, 14
17-19, 23, 24
N/C
These pins are not connected internally, however all data
shown herein was measured with these pins connected to
RF/DC ground externally.
4
RFIN
This pad is DC coupled and matched to 50 Ohms.
5, 15
GND
These pins and package bottom must be
connected to RF/DC ground.
6-8
Vgg1, Vgg2
Vgg3
Gate control for amplifier. External bypass capacitors of
100pF, 10nF and 4.7uF are required. Please follow “MMIC
Amplifier Biasing Proceedure” App Note.
10, 11
20-22
Vdd1, Vdd2,
Vdd3, Vdd4, Vdd5
Drain bias voltage for the amplifier. External bypass
capacitors of 100pF, 10nF and 4.7µF capacitors are
required.
12
Vref
DC voltage of diode biased through external resistor, used
for temperature compensation of Vdet. See Application
Circuit.
13
Vdet
DC voltage representing RF output power rectified by diode
which is biased through an external resistor. See Appilation
Circuit.
16
RFOUT
This pin is DC coupled and matched to 50 Ohms.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Amplifiers - Linear & Power - SMT
Pin Number
8
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Amplifiers - Linear & Power - SMT
Application Circuit
9
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC995LP5GE
v00.0611
GaAs pHEMT MMIC 3 WATT POWER AMPLIFIER SMT
WITH POWER DETECTOR, 12 - 16 GHz
Amplifiers - Linear & Power - SMT
Evaluation PCB
List of Materials for Evaluation PCB EVAL01-HMC995LP5GE
Item
Description
J1, J2, J5, J6
K Connector SRI
J3, J4
DC Pin
C2, C3, C9, C12,
C14, C16, C17,
C19
100 pF Capacitor, 0402 Pkg.
C1, C4, C10, C11,
C13, C15, C18,
C20
10 nF Capacitor, 0402 Pkg.
C21, C22, C25
- C30
4.7uF Capacitor, Case A.
U1
HMC995LP5GE Power Amplifier
PCB
600-00163-00 Evaluation PCB
[1]
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon FR4
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising