poe201-ms/4
Product Data Sheet
POE201-MS/4
4-Port Fast Ethernet/PoE-af Mid-span Injector
Overview
The IFS 4-Port Fast Ethernet/PoE-af Mid-span
Injector is a quick and easy solution that can be
used when a network device does not provide the
functionality as a power source equipment (PSE),
such as a non-PoE switch, and yet several edge
devices being deployed are PoE powered devices
(PD).
This module provides the ability to combine
Ethernet data and PoE on four individual category
cables for deployment of up to four PoE powered
edge devices of up to 100m (328 ft.). This
provides a cost-effective and efficient power
distribution cable management solution for a
PoE-centric IP network.
The 100m (328 ft.) distance is based on the
EIA-568 standard and is the maximum distance
between two Ethernet devices. The IFS 4-Port
Fast Ethernet/PoE-af Mid-Span Injector can be
deployed at any location within the 100m (328ft.)
cable run; however, typically this device would be
installed closer to the non-PoE device.
This device facilitates easier network planning by
eliminating restrictions of edge device placement
near AC power outlets and reduces the need for
AC wiring and installation costs while delivering
higher reliability.
Standard Features
E Compact size
E Plug-and-play design
E Standalone or wall-mount installation
E Can be used with the IFS SP-PoE splitter or other
IEEE 802.3af compliant devices
E
E
E
E
Supports 10/100Base-TX Ethernet
Complies with IEEE 802.3/802.3u
Complies with IEEE 802.3af PoE Standard
PoE Circuit
E Auto-detect of PoE IEEE 802.3af equipment providing
protection from incorrect installation
E Current overload detect
E Four RJ-45 connectors for data
E One power connector for power input
E Four RJ-45 connectors for data and 48VDC output to a
single Category cable
POE201-MS/4
4-Port Fast Ethernet/PoE-af Mid-span Injector
Specifications
Ethernet
E Data Rate : 10/100Mbps
E Throughput (packet per second): 148800pps@64Bytes
E IEEE Standards: IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3af
Power over Ethernet
E EIA/TIA-568 Standards : Category 5/5e cable
Power Over Ethernet (PoE)
E
E
E
E
PoE Standard : IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type : Mid-Span / Type B
PoE Output Pin Assignment : 4/5(+), 7/8(-)
PoE Output Power : 48VDC @ 350mA, 15.4 watts max.
Connectors and Indicators
E Ethernet + DC Out : 4 x RJ-45 connectors (10/100Base-TX with IEEE 802.3af PoE
PSE for data + DC out)
E Ethernet Data : 4 x RJ-45 connectors (10/100Base TX for data in)
E DC Input : DC receptacle
E LED Indicator : 1-power; 4-PoE Ready/In-use
Electrical and Mechanical
E
E
E
E
E
E
Input Power : 48VDC, 1.5mA max.
PoE Output Power : 48VDC @ 350mA, 15.4 watts max.
Maximum Powered Devices : 1 per port (4 individual total)
Enclosure : Metal
Dimensions (H x W x D) : 1.02 x 2.76 x 3.82 in.; (26 x 70 x 97mm)
Weight : 0.49 lbs. / 220g
Environmental
E
E
E
E
MTBF : >50,000 hrs. @ 25°C
Operating Temperature : 0ºC - 50ºC
Storage Temperature : -20ºC - 70ºC
Relative Humidity : 0%–90% (non-condensing)
Accessories
E PS48VDC65W-EU : 100-240V AC Input 48V DC 1.35Amp Output Power Supply
Brick model EU plug
E PS48VDC65W-UK: 100-240V AC Input 48V DC 1.35Amp Output Power Supply Brick
model UK plug
Ordering Information
Diagram
POE201-MS/4
4-Port Fast Ethernet/PoE-af Mid-span Injector
As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your sales representative.
IPS-POE201-MS/4-2012-11-29 07:39:56 Released : 21-NOV-12;
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising