Operating Instructions (English) - Support

Operating Instructions (English) - Support
Operating Instructions
Digital Cordless Phone with Answering Machine
Model No.
KX-TGD390C
KX-TGD392C
KX-TGD393C
KX-TG163CSK
KX-TGD394C
Model shown is KX-TGD390.
Before initial use, see “Getting Started”
on page 8.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
For assistance, please visit our Support page:
www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
1
2016/01/25
15:56:50
Table of Contents
Introduction
Useful Information
Model composition .......................................3
Accessory information ..................................3
Voicemail service .......................................28
Error messages ..........................................29
Troubleshooting .........................................29
Wall mounting (Charger only) ....................32
Industry Canada Notices and other
information .................................................33
Warranty .....................................................34
Important Information
For your safety .............................................5
Important safety instructions ........................6
For best performance ...................................6
Other information .........................................7
Specifications ...............................................7
Index
Index...........................................................35
Getting Started
Setting up .....................................................8
Controls ........................................................9
Display icons ..............................................10
Language settings ......................................10
Date and time .............................................10
Recording your greeting message .............10
Other settings .............................................10
Making/Answering Calls
Making calls ...............................................12
Answering calls ..........................................12
Useful features during a call .......................12
Intercom .....................................................13
Phonebook
Phonebook .................................................14
Speed dial ..................................................15
Programming
Menu list .....................................................17
Alarm ..........................................................20
Night mode .................................................20
Call block ....................................................20
Other programming ....................................21
Registering a handset to the base unit .......22
Caller ID Service
Using Caller ID service ...............................23
Caller list ....................................................24
Answering System
Answering system ......................................25
Turning the answering system on/off .........25
Greeting message ......................................25
Listening to messages ...............................25
Remote operation .......................................26
Answering system settings .........................27
2
TGD39xC_(en)_ver021.pdf
2
2016/01/25
15:56:50
Introduction
Model composition
Base unit
Handset
Part No.
Part No.
KX-TGD390
KX-TGD390
KX-TGDA39
1
KX-TGD392
KX-TGD390
KX-TGDA39
2
KX-TGD393
KX-TGD390
KX-TGDA39
3
KX-TG163SK
KX-TGD390
KX-TGDA39
3
KX-TGD394
KX-TGD390
KX-TGDA39
4
Series
Model No.
KX-TGD390
series
Quantity
Accessory information
Supplied accessories
No.
Accessory item/
Part number
A
B
Quantity
KX-TGD390
KX-TGD392
KX-TGD393
KX-TG163SK
KX-TGD394
AC adaptor/PNLV226
1
1
1
1
Telephone line cord
1
1
1
1
C
Rechargeable batteries*1
2
4
6
8
D
Handset cover*2
1
2
3
4
E
Charger
–
1
2
3
*1
*2
See page 4 for replacement battery information.
The handset cover comes attached to the handset.
A
B
C
D
E
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
3
2016/01/25
3
15:56:50
Introduction
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item
Model number/Specifications
Rechargeable
batteries
HHR-4DPA
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Expanding your phone system
Handset (optional): KX-TGDA20C
You can expand your phone system by registering optional handsets (6 max.) to a single base
unit.
4
TGD39xC_(en)_ver021.pdf
For assistance, visit www.panasonic.ca/english/support
4
2016/01/25
15:56:51
Important Information
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact us
by visiting our Support page:
www.panasonic.ca/english/support
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
5
2016/01/25
5
15:56:51
Important Information
R This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
– there is a power failure.
Battery
R We recommend using the batteries noted
on page 4. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
6
TGD39xC_(en)_ver021.pdf
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Environment
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
For assistance, visit www.panasonic.ca/english/support
6
2016/01/25
15:56:51
Important Information
Other information
Specifications
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
R Standard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
R Frequency range:
1.92 GHz to 1.93 GHz
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.7 W
Maximum: Approx. 3.5 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Compliance with TIA-1083 standard
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
Compatible with
Hearing Aid T-Coil
T
TIA-1083
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
7
2016/01/25
7
15:56:51
Getting Started
Battery installation
Setting up
Connections
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (1).
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
).
R Confirm correct polarities ( ,
1
Battery charging
Charge for about 7 hours.
4
Note for battery charging
5
3
4
R Clean the charge contacts with a soft and
dry cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords.
Battery level
1
2
Icon
Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
Operating time
In continuous use
10 hours max.*1
Not in use (standby)
6 days max.*1
*1
8
TGD39xC_(en)_ver021.pdf
If eco mode is on.
For assistance, visit www.panasonic.ca/english/support
8
2016/01/25
15:56:51
Getting Started
Note:
R Actual battery performance depends on
usage and ambient environment.
Intelligent eco mode
This feature automatically reduces handset
power consumption whenever possible.
When it is activate,
is displayed.
Controls
–
Handset
–
F
–
–
–
Dial keypad (*: TONE)
MZN (SP-PHONE: Speakerphone)
Microphone
Receiver
Display
MOFFN
MFLASHNMCALL WAITN
MINTERCOMN
R This feature is available between 2
handsets.
Charge contacts
Soft keys
Navigator key
MDN, MCN, MFN, or MEN: Scroll through various
lists and items.
VOL. (Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
: View the phonebook entry.
MFN
MEN REDIAL: View the redial list.
MCN CID (Caller ID): View the caller list.
Base unit
G
A
B C D
E
F
A
H
B
C
I
J
D
E
G
K
A
A
B
Speaker
M
N (TALK)
H I J K
Charge contacts
M
N (Repeat)
MjN/MkN (VOLUME: Volume up/down)
M N (LOCATOR)
Speaker
MERASEN
ANSWER ON/OFF indicator
MANSWER ON/OFFN
M
N (PLAY/STOP)
Message indicator
M
N (Skip)
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
9
2016/01/25
9
15:56:51
Getting Started
Display icons
Handset display items
Item
Voice guidance language
1
2
Meaning
MMENUN#112
MbN: Select the desired setting. a
MSAVEN a MOFFN
Within base unit range
Out of base unit range
The line is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
Eco mode is on. (page 9)
Z
Speakerphone is on.
(page 12)
Date and time
1
2
3
4
Ringer volume is off.
(page 12)
Night mode is on. (page 20)
Privacy mode is on. (page 19)
Alarm is on. (page 20)
Handset number
Battery level
5
6
MMENUN#101
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2016
07 15 16
MOKN
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
*: Select “AM” or “PM”.
MSAVEN a MOFFN
Note:
R Either 12-hour or 24-hour time format is
used depending on the display language.
Blocked call (page 20)
Clarity booster is on
automatically.
In use
Answering system is being
used by the base unit or
another handset.
Line in
use
Someone is using the line.
Recording your greeting
message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 25 for details.
1
2
3
Language settings
Display language
1
2
MMENUN#110
MbN: Select the desired setting. a
MSAVEN a MOFFN
10
TGD39xC_(en)_ver021.pdf
MMENUN#302
MbN: “Yes” a MSELECTN
Record a greeting message. a MSTOPN
a MOFFN
Other settings
Dialing mode
1
MMENUN#120
For assistance, visit www.panasonic.ca/english/support
10
2016/01/25
15:56:51
Getting Started
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
11
2016/01/25
11
15:56:51
Making/Answering Calls
Adjusting the handset ringer volume
Making calls
Press MDN or MCN repeatedly while ringing.
1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M
N or MZN
R To adjust the receiver or speaker
volume, press MDN or MCN repeatedly.
3
When you finish talking, press MOFFN.
Adjusting the base unit ringer volume
Press MjN or MkN repeatedly.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Note:
R To switch back to the receiver, press MZN/
M
N.
Hold
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list.
1
2
MEN REDIAL
MbN: Select the desired entry. a M
N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 15).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
2
9 a MDN (Pause)
Dial the phone number. a M
N
Answering calls
1
Lift the handset and press M
when the unit rings.
2
N or M
N
When you finish talking, press MOFFN.
Auto talk: You can answer calls simply by
lifting the handset (page 19).
Temporary handset ringer off: Press M N.
12
TGD39xC_(en)_ver021.pdf
Useful features during a
call
1
2
3
Press MMENUN during an outside call.
MbN: “Hold” a MSELECTN
To release hold, press M
N.
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
1
2
Press MMUTEN during a call.
To return to the call, press MMUTEN.
Flash
MFLASHN allows you to use the special
features of your host PBX.
Note:
R To change the flash time, see page 19.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
For assistance, visit www.panasonic.ca/english/support
12
2016/01/25
15:56:51
Making/Answering Calls
caller’s information is displayed on the
handset that is in use after you hear the call
waiting tone.
1
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conf.” a MSELECTN
R To cancel the conference: MMENUN a
MbN: “Stop conference” a
MSELECTN
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing (for
rotary/pulse service users)
Press * (TONE) before entering access
numbers which require tone dialing.
Intercom
Making an intercom call
1
MINTERCOMN.
When 3 or more handsets are
registered:
MbN: Select the desired unit. a MSELECTN
Call share
While you are on an outside call, another unit
can join the conversation. Only 2 units can join
an outside call.
Note:
R To prevent other users from joining your
conversations, turn privacy mode on
(page 19).
Transferring calls, conference
calls
1
During an outside call, press
MINTERCOMN.
When 3 or more handsets are
registered:
MbN: Select the desired unit. a MSELECTN
2
Wait for the paged party to answer.
R If the paged party does not answer,
N to return to the outside
press M
call.
3
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conf.” a MSELECTN
R To leave the conference, press MOFFN.
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
13
2016/01/25
13
15:56:51
Phonebook
2
Phonebook
You can add 100 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook.
Adding phonebook entries
1
2
3
4
5
or MFN
a MMENUN
MbN: “Add new entry” a MSELECTN
Enter the party’s name. a MOKN
Enter the party’s phone number. a MOKN
MbN: Select the desired group. a
MSELECTN 2 times a MOFFN
Entering characters
Press the dial key that corresponds to the
desired character. Press repeatedly to scroll
through the available characters.
The following operations are also available.
Key
Operation
*
Switch between the
uppercase and lowercase
(A « a)
MFN MEN
Move the cursor
MCLEARN
Erase the character or number
R To erase all, press and
hold it.
Storing a redial list number to the
phonebook
1
2
3
MEN REDIAL
MbN: Select the desired entry. a MSAVEN
To store the name, continue from step 3,
“Editing entries”, page 15.
Storing caller information to the
phonebook
1
3
4
5
6
MCN CID
14
TGD39xC_(en)_ver021.pdf
MbN: Select the desired entry.
R To edit the number: MMENUN a MbN:
“Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the desired
format. And then, press MSAVEN. Go to
step 5.
MMENUN
MbN: “Save CID” a MSELECTN
MbN: “Phonebook” a MSELECTN
Continue from step 3, “Editing entries”,
page 15.
Groups
You can assign your phone entries to groups
for each searching. You can assign a ringtone
to each group to help identify incoming calls
(Caller ID required).
Changing group names/setting ringer
ID
1
2
3
or MFN
a MMENUN
MbN: “Group” a MSELECTN
MbN: Select the desired group. a
MSELECTN
4
To change group names
MbN: “Group name” a MSELECTN a
Edit the name. a MSAVEN
To set group ringer tone
MbN: Select the current setting of the
group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN
5
MOFFN
Finding and calling from a
phonebook entry
1
2
3
or MFN
MbN: Select the desired entry.
M
N
For assistance, visit www.panasonic.ca/english/support
14
2016/01/25
15:56:51
Phonebook
Editing entries
1
2
3
4
5
Find the desired entry (page 14).
MMENUN a MbN: “Edit” a MSELECTN
MbN: Select the desired group (page 14).
a MSELECTN 2 times a MOFFN
Adding phone numbers to speed
dial keys
n By entering phone numbers:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
2
3
4
Find the desired entry (page 14).
MMENUN a MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1
2
3
4
You can assign 1 phone number to each of
the dial keys (1 to 9) on the handset.
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN
Erasing an entry
1
2
3
Speed dial
During an outside call, press MMENUN.
MbN: “Phonebook” a MSELECTN
MbN: Select the desired entry.
Press MCALLN to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
pauses after the number and PIN as
necessary (page 12).
R If you have rotary/pulse service, you need
to press * (TONE) before pressing
MMENUN in step 1 to change the dialing
mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding * (TONE) to the beginning of
phone numbers you wish to chain dial
(page 14).
MbN: “Manual” a MSELECTN
Enter the party’s name. a MOKN
Enter the party’s phone number. a
MOKN a MSELECTN a MOFFN
n From the phonebook:
1 Press and hold the desired speed dial
key (1 to 9). a MADDN
2
3
MbN: “Phonebook” a MSELECTN
MbN: Select the desired entry. a
MSAVEN a MOFFN
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
Editing an entry
1
2
3
4
Press and hold the desired speed dial key
(1 to 9). a MMENUN
MbN: “Edit” a MSELECTN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a
MOKN a MSELECTN a MOFFN
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
15
2016/01/25
15
15:56:51
Phonebook
Erasing an entry
1
2
3
Press and hold the desired speed dial key
(1 to 9). a MMENUN
MbN: “Erase” a MSELECTN
MbN: “Yes” a MSELECTN a MOFFN
Making a call
Press and hold the desired speed dial key (1
to 9). a M
N
16
TGD39xC_(en)_ver021.pdf
For assistance, visit www.panasonic.ca/english/support
16
2016/01/25
15:56:51
Programming
Menu list
Scrolling through the display menus: MMENUN a Press MCN or MDN to select the desired main
menu. a MSELECTN
OR
Using the direct command code: MMENUN a Enter the desired code.
Example: Press MMENUN#101.
R To exit the operation, press MOFFN.
Display menu tree and direct command code table
“Phonebook”
Main menu:
Operation
Code
Page
Viewing the phonebook entry.
#280
14
Operation
Code
Page
Viewing the caller list.
#213
24
Main menu:
“Caller list”
Main menu:
“Answering device”
Sub-menu 1
Code
Page
Play new msg.
Sub-menu 2
–
–
#323
26
Play all msg.
–
–
#324
26
Erase all msg.
–
–
#325
–
Record greeting
–
#302
25
Check greeting
–
#303
25
Pre-recorded
–
#304
25
Greeting
Settings
Settings <Default>
Ring count
Toll saver
<4 rings>
2-7 rings
#211
27
Recording time
<3 min>
1 min
Greeting only*1
#305
27
Remote code
<111>
#306
26
Screen call
<On>
Off
#310
27
Answer on
–
–
#327
–
Answer off
–
–
#328
–
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
17
2016/01/25
17
15:56:51
Programming
Main menu:
“V.M. access” (V.M.: Voicemail)
Operation
Code
Page
Listening to voicemail messages.
#330
28
Operation
Code
Page
Paging the desired unit.
#274
13
Code
Page
#101
10
Main menu:
Main menu:
“Intercom”
“Set date & time”
Sub-menu 1
Sub-menu 2
Settings <Default>
Date and time
–
Alarm
–
<Off>
Once
Daily
#720
20
Time adjustment*2
–
<Caller ID auto>
Manual
#226
–
Main menu:
–
“Initial setting”
Sub-menu 1
Sub-menu 2
Settings <Default>
Code
Page
Ringer setting
Ringer volume
Off–6 <6>
#160
12
Ringer tone*3
<Tone 1>
#161
–
Night mode
– On/Off
On
<Off>
#238
20
Night mode
– Start/End
<11:00 PM/06:00
AM>
#237
20
Set date & time
Date and time
Talking Caller ID
#101
10
Alarm
<Off>
Once
Daily
–
#720
20
Time adjustment*2
<Caller ID auto>
Manual
#226
–
Handset
<On>
Off
#162
23
Base unit*1
On
<Off>
#G162
Handset name
–
–
#104
21
Call block
–
–
#217
20
18
TGD39xC_(en)_ver021.pdf
First ring
<On>
Off
#173
21
Block w/o num*1
On
<Off>
#240
21
For assistance, visit www.panasonic.ca/english/support
18
2016/01/25
15:56:51
Programming
Sub-menu 1
Sub-menu 2
Speed dial
Settings <Default>
Code
Page
–
#261
15
–
#331
28
<On>
Off
#332
28
–
Voice mail
Store VM access#
VM tone detect
LCD contrast
–
Level 1–4 <2>
#145
–
Key tone
–
<On>
Off
#165
–
Auto talk
–
On
<Off>
#200
12
Set dial mode
<Tone>
Pulse
#120
10
Set flash time
80 ms
90 ms
100 ms
110 ms
160 ms
200 ms
250 ms
300 ms
400 ms
600 ms
<700 ms>
900 ms
#121
12
Set line mode*4
A
<B>
#122
–
C. WTG options
On
<Off>
#215
23
On
<Off>
#194
13
Set tel line
–
Privacy mode
Registration
Register handset
–
#130
22
Deregistration*1
–
#131
22
Display
<English>
Français
#110
10
Voice prompt
<English>
Français
#112
10
Operation
Code
Page
Displaying customer support Web address.
#680
–
Change language
Main menu:
*1
“Customer support”
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
19
2016/01/25
19
15:56:51
Programming
*2
*3
*4
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 10).
The preset melodies in this product (“Tone 3” - “Tone 5”, “Melody 1” - “Melody 10”)
are used with permission of © 2012 Copyrights Vision Inc.
Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
1
2
MMENUN#720
MbN: Select the desired alarm option. a
MSELECTN
3
Enter the desired month and date. a
MOKN
4
5
6
Set the desired time.
7
MbN: Select the desired setting. a
MSAVEN
3
Follow the directions on the display to
complete the operation.
Changing the start and end time
1
2
MMENUN#237
Follow the directions on the display to
complete the operation.
*: Select “AM” or “PM”. a MOKN
Call block
MbN: Select the desired alarm tone. a
MSELECTN
This feature allows the unit to block calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 21).
– the unit receives a call without phone
number (“Blocking incoming calls that have
no phone number”, page 21).
When a call is received, the unit rings once*1
while caller information is being received. If
the caller’s phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call. (Caller ID
subscribers only)
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
“Off” (page 21).
MSELECTN a MOFFN
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each unit.
Important:
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
2
Important:
R Blocked calls are logged in the caller list.
MMENUN#238
20
TGD39xC_(en)_ver021.pdf
For assistance, visit www.panasonic.ca/english/support
20
2016/01/25
15:56:51
Programming
Storing unwanted callers
Turning the first ring on and off
You can store up to 60 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
You can choose whether the first ring sounds
when a call is received.
“On” (default): The first ring for all calls will be
heard, including calls from blocked phone
numbers.
“Off”: The first ring is muted for all calls. If
this setting is selected, the unit will never ring
for calls from blocked phone numbers.
1
2
3
4
5
6
7
MCN CID
MbN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
“Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 5.
MMENUN
MbN: “Save CID” a MSELECTN
MbN: “Call block” a MSELECTN
MbN: “Yes” a MSELECTN
Edit the phone number if necessary (24
digits max.).
8 MSAVEN a MOFFN
n By entering phone numbers:
1
2
3
4
MMENUN#217
MMENUN a MbN: “Add” a MSELECTN
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
MMENUN#173
MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call
block numbers
1
2
3
MMENUN#217
MbN: Select the desired entry.
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
Note:
R When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: MERASEN a MCN
a MSAVEN a MOFFN
MSAVEN a MOFFN
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
1
2
1
2
MMENUN#240
MbN: Select the desired setting. a
MSAVEN a MOFFN
Other programming
Changing the handset name
1
2
3
4
MMENUN#104
Enter the desired name.
MSAVEN
MbN: Select the desired setting. a
MSELECTN 2 times a MOFFN
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
21
2016/01/25
21
15:56:51
Programming
Registering a handset to
the base unit
If for some reason the handset is not
registered to the base unit, re-register the
handset.
1
Handset:
MMENUN#130
2
Base unit:
Press and hold M N for about 5 seconds.
R If all registered handsets start ringing,
press M N again to stop, then repeat
this step.
3
Handset:
Press MOKN, then wait until a long beep
sounds.
Deregistering a handset
1
MMENUN#131
R All handsets registered to the base unit
are displayed.
2
MbN: Select the handset you want to
cancel. a MSELECTN
3
MbN: “Yes” a MSELECTN a MOFFN
22
TGD39xC_(en)_ver021.pdf
For assistance, visit www.panasonic.ca/english/support
22
2016/01/25
15:56:51
Caller ID Service
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Unavailable”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private caller”: The caller
requests not to send caller information.
– “Long distance”: The caller makes a
long distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Talking Caller ID
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of your
phone service provider.
– turn this feature on (page 18).
When caller information is received, the
handsets and/or base unit announce the
caller’s name or phone number received from
your phone service provider following every
ring.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R Caller ID service has a limit of how many
characters can be displayed. If the caller’s
name is too long, the unit may not be able
to display or announce the entire name.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
For Call Waiting Deluxe service
users
To use Call Waiting Deluxe, you must
subscribe to Call Waiting Deluxe from your
phone service provider. This feature not only
allows the unit currently in use to display the
2nd caller’s information, but also offers you a
variety of ways to deal with the 2nd call.
Important:
R Please contact your phone service provider
for details and availability of this service in
your area.
R This feature must be turned on before it can
be used.
To turn Call Waiting Deluxe on/off
To use Call Waiting Deluxe, you must turn this
feature on. The default setting is “Off”.
1
2
MMENUN#215
MbN: Select the desired setting. a
MSAVEN a MOFFN
Call Waiting Deluxe service options
When a 2nd call is received, you can choose
how to handle the call by selecting an option
shown on the unit display.
Note:
R Your phone service provider may not offer
all of the options (page 23).
Displayed
option
Answer
Function
Answers the waiting call,
while keeping the 1st call
on hold.
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
23
2016/01/25
23
15:56:52
Caller ID Service
Displayed
option
Hold
Holds the waiting call.
The caller will hear the
pre-recorded hold
message played by your
phone service provider.
Announce
The caller will hear the
pre-recorded busy
message played by your
phone service provider
(for example, “We are not
available now.”) and will
then be disconnected.
Forward
Drop
Conference
Forwards the waiting call
to the voicemail service
provided by your phone
service provider. You
must subscribe to
voicemail service to use
this function.
Disconnects (drops) the
current call and answers
the waiting call.
Answers the waiting call
and combines it with the
current call to make a
conference call (3-party
call).
Return
Returns to the waiting
caller while keeping the
current call on hold.
Drop caller1
Disconnects (drops) the
1st call during a
conference call.
Drop caller2
Disconnects (drops) the
2nd call during a
conference call.
To use Call Waiting Deluxe service
1
When you hear a call waiting tone during
an outside call, press MFLASHN.
R The option menu is displayed.
2
MbN: Select the desired option. a
MSELECTN
R After selecting “Answer”, “Hold”, or
“Conference”, you can select
24
TGD39xC_(en)_ver021.pdf
another option. a MFLASHN a MbN:
Select the desired option. a
MSELECTN
Function
Note:
R To exit from the option menu, wait for 20
seconds.
Caller list
Viewing the caller list and calling
back
1
2
3
MCN CID
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
To call back, press M
N.
Editing a caller’s phone number
1
2
3
4
5
MCN CID
MbN: Select the desired entry.
MMENUN a MbN: “Edit” a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format.
M
N
Note:
R The number edited in step 4 will not be
saved in the caller list.
Erasing selected caller
information
1
2
3
MCN CID
MbN: Select the desired entry.
MERASEN a MbN: “Yes” a MSELECTN
a MOFFN
For assistance, visit www.panasonic.ca/english/support
24
2016/01/25
15:56:52
Answering System
Answering system
The answering system can answer calls and
record caller messages. If you do not want to
record messages, select “Greeting only”
as the recording time setting (page 27).
Recording capacity
The total recording time is about 15 minutes,
including your greeting message. Up to 64
messages can be recorded.
Note:
R When message memory becomes full:
– “Messages full” is shown on the
handset display.
– The ANSWER ON/OFF indicator on the
base unit flashes rapidly if the answering
system is turned on.
Turning the answering
system on/off
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
Greeting message
Resetting to a pre-recorded greeting
message
1
2
MMENUN#304
MYESN a MOFFN
Playing back the greeting
message
1
2
MMENUN#303
To exit, press MOFFN.
Listening to messages
Using the base unit
When new messages have been recorded,
message indicator on the base unit flashes.
Press M
N (PLAY).
R New messages will be played. If there are
no new messages, old messages will be
played.
Operating the answering system
during playback
Key
Operation
MjN or MkN
Adjust the speaker
volume
M
N
Repeat message
Recording your greeting message
M
N
Skip message
1
2
3
MMENUN#302
M
N (STOP)
MbN: “Yes” a MSELECTN
MERASEN
4
After a beep sounds, hold the handset
away and speak clearly into the
microphone.
Press MSTOPN to stop recording.a MOFFN
Using a pre-recorded greeting
message
Select “Greeting only” in step 2 of
“Caller’s recording time”, page 27.
Stop playback
Erase currently playing
message
Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
Using the handset
When new messages have been recorded,
“New message” is displayed.
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
25
2016/01/25
25
15:56:52
Answering System
1
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2
When finished, press MOFFN.
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Key
Operation
MDN or MCN
Adjust the receiver/speaker
volume (during playback)
1 or MFN
Repeat message (during
playback)
2 or MEN
Skip message (during
playback)
3
Enter the “Settings” menu
4
Play new messages
5
Play all messages
6
Play greeting message
76
Record greeting message
8
Turn answering system on
Remote operation
You can use a touch-tone phone to call the
unit while away from home and listen to
messages.
Remote access code
For security, a 3-digit remote access code
must be entered when operating the
answering system remotely. The default
setting is “111”.
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1
2
3
MMENUN#306
Enter the desired 3-digit remote access
code.
R To deactivate remote operation, press
*.
MSAVEN a MOFFN
Using the answering system
remotely
MPAUSEN
Pause
9 or
MSTOPN
Stop recording
Stop playback
1
Dial your phone number from a
touch-tone phone.
message*1
0
Turn answering system off
2
*4
Erase currently playing
message
After the greeting message starts, enter
your remote access code.
3
*5
Erase all messages
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 27).
*6
Reset to a pre-recorded
greeting message
4
When finished, hang up.
*1
To resume playback:
MbN: “Playback” a MSELECTN
Calling back (Caller ID subscribers
only)
1
2
Press MPAUSEN during playback.
MbN: “Call back” a MSELECTN
26
TGD39xC_(en)_ver021.pdf
Voice guidance
During remote operation, the unit’s voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
For assistance, visit www.panasonic.ca/english/support
26
2016/01/25
15:56:52
Answering System
Remote commands
Key
Operation
1
Repeat message (during playback)
2
Skip message (during playback)
4
Play new messages
5
Play all messages
9
Stop playback
0
Turn answering system off
*4
Erase currently playing message
*5
Erase all messages
*#
End remote operation
(or hang up)
Turning on the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
R A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 26).
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Ring count” before the unit
answers calls. You can select 2 to 7 rings, or
“Toll saver”.
The default setting is “4 rings”.
“Toll saver”: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages.
1
2
MMENUN#211
MbN: Select the desired setting. a
MSAVEN a MOFFN
Caller’s recording time
You can change the maximum message
recording time allowed for each caller.
1
2
MMENUN#305
MbN: Select the desired setting. a
MSAVEN a MOFFN
Selecting “Greeting only”
You can select “Greeting only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting only” in step 2 on
“Caller’s recording time”, page 27.
Answering system settings
Call screening
While a caller is leaving a message, you can
listen to the call through the handset’s speaker.
1
2
MMENUN#310
MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
27
2016/01/25
27
15:56:52
Useful Information
Example:
Voicemail service
In addition to your unit’s answering system
you may also have voicemail service from
your phone service provider. Voicemail is
an answering service that may be offered by
your phone service provider. This service can
also record calls when you are unavailable to
answer the phone or when your line is busy.
Messages are recorded on the phone
company system and not on the unit’s
answering system.
R To use the voicemail service rather than the
unit’s answering system, turn off the
answering system (page 25).
If you have unit’s answering system set to on
and also the voicemail enabled, the system
with least amount of rings will record the
message first.
Example:
If the unit’s answering system is set to 4 rings
(page 27) and the voicemail answering system
provided by your phone company is set to 6
rings (call your service provider), the unit’s
answering system will record the incoming call
first.
Storing the voicemail (VM)
access number
You can store the phone number used to
access your voicemail service.
1
2
1-222-333-4444
VM access
number
28
TGD39xC_(en)_ver021.pdf
Pauses
8888
Password
To erase the voicemail access number
1
2
MMENUN#331
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Voicemail (VM) tone detection
Your voicemail service provider sends special
signals to the unit to let you know that you
have new voicemail messages. If you hear a
series of dial tones followed by a continuous
dial tone after you press M
N, you have new
voicemail messages.
The unit can detect these signals
automatically. Turn this feature off in the
following situations.
– You do not subscribe to voicemail service.
– Your phone is connected to a PBX.
Turning VM tone detection on/off
1
2
MMENUN#331
Enter your access number. a MSAVEN
a MOFFN
Note:
R When storing your voicemail access
number and your mailbox password, press
MDN (Pause) to add pauses (page 12)
between the access number and the
password as necessary. Contact your
phone service provider for the required
pause time.
PPPP
MMENUN#332
MbN: Select the desired setting. a
MSAVEN a MOFFN
Listening to voicemail messages
1
MMENUN#330
R The speakerphone turns on.
2
3
Follow the pre-recorded instructions.
When finished, press MOFFN.
Note:
R You can also use the MVMN soft key, if
displayed, to play new voicemail messages.
R If the handset still indicate there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding # until the handset beeps.
For assistance, visit www.panasonic.ca/english/support
28
2016/01/25
15:56:52
Useful Information
Error messages
Display message
Cause/solution
Access # to VM service is
not stored
R You have not stored the voicemail access number.
Store the number (page 28).
Base no power
or
No link. Re-connect base
AC adaptor.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been cancelled.
Re-register the handset (page 22).
Busy
R Other units are in use and the system is busy. Try
again later.
Check tel line
R The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 8).
Error!!
R Recording was too short. Try again.
Invalid
R There is no handset registered to the base unit
matching the handset number you entered.
R The handset is not registered to the base unit.
Register the handset (page 22).
Use rechargeable battery.
R A wrong type of battery such as alkaline or
manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert the batteries into the handset again.
General use
Problem
Cause/solution
The handset does not turn on
even after installing charged
batteries.
R Place the handset on the base unit or charger to turn on
the handset.
The unit does not work.
R
R
R
R
Make sure the batteries are installed correctly (page 8).
Fully charge the batteries (page 8).
Check the connections (page 8).
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset has not been registered to the base unit.
Register the handset (page 22).
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
29
2016/01/25
29
15:56:52
Useful Information
Problem
Cause/solution
I cannot hear a dial tone.
R The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
Time on the unit has shifted.
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to “Manual”
(off) (page 18).
Battery recharge
Problem
Cause/solution
I fully charged the batteries, but
–
still flashes,
–
is displayed, or
– the operating time seems to
be shorter.
R Clean the battery ends ( ,
) and the charge contacts
with a dry cloth and charge again.
R It is time to replace the batteries (page 8).
Making/answering calls, intercom
Problem
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 22).
is displayed.
Noise is heard, sound cuts in
and out.
R You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The handset does not ring.
R The ringer volume is turned off. Adjust the ringer volume
(page 12, 18).
R Night mode is turned on. Turn it off (page 20).
I cannot make a call.
R The dialing mode may be set incorrectly. Change the
setting (page 10).
30
TGD39xC_(en)_ver021.pdf
For assistance, visit www.panasonic.ca/english/support
30
2016/01/25
15:56:52
Useful Information
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R You must subscribe to Caller ID service. Contact your
phone service provider for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service may not be available in some
areas. Contact your phone service provider for details.
Caller information is displayed
or announced late.
R Depending on your phone service provider, the unit may
display or announce the caller’s information at the 2nd
ring or later.
Caller information is not
announced.
R The handset or base unit’s ringer volume is turned off.
Adjust it (page 12, 18).
R The Talking Caller ID feature is turned off. Turn it on
(page 18).
R The number of rings for the answering system is set to “2
rings” or “Toll saver”. Select a different setting
(page 27).
R If the base unit and another handset are having an
intercom call, your handset does not announce caller
information.
Answering system
Problem
Cause/solution
The unit does not record new
messages.
R The answering system is turned off. Turn it on (page 25).
R The message memory is full. Erase unnecessary
messages (page 25).
R The recording time is set to “Greeting only”. Change
the setting (page 27).
R Your phone service provider’s voicemail service may be
answering your calls before the unit’s answering system
can answer your calls. Change the unit’s number of rings
setting (page 27) to a lower value, or contact your phone
service provider.
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
31
2016/01/25
31
15:56:52
Useful Information
Voicemail
Problem
Cause/solution
“New Voice Mail” is shown
on the handset display. How do
I remove this message from the
display?
R Listen your new voicemail messages (page 28).
Depending on your voicemail service provider, you may
need to erase all messages in your voice mailbox in order
to remove this message.
R You can remove this message manually by pressing and
holding # until the unit beeps.
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
R Disconnect the AC adaptor and telephone line cord from
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service centre.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Wall mounting (Charger only)
Note:
R Make sure that the wall and the fixing method are strong enough to support the weight of the
unit.
Drive the screws (1) (not supplied) into the wall.
2 27.2 mm (1 1/16 inches)
2
1
32
TGD39xC_(en)_ver021.pdf
For assistance, visit www.panasonic.ca/english/support
32
2016/01/25
15:56:52
Useful Information
Industry Canada Notices and other information
NOTICE:
This equipment meets the applicable
Industry Canada Terminal Equipment
Technical Specifications. This is confirmed
by the registration number. The
abbreviation, “IC:”, before the registration
number signifies that registration was
performed based on a Declaration of
Conformity indicating that Industry Canada
technical specifications were met. It does
not imply that Industry Canada approved
the equipment.
Users should ensure, for their own protection,
that the electrical ground connections of the
power utility, telephone lines and internal
metallic water pipe system, if present, are
connected together. This precaution may be
particularly important in rural areas.
NOTICE:
The Ringer Equivalence Number (REN)
assigned to each terminal device provides an
indication of the maximum number of
terminals allowed to be connected to a
telephone interface. The termination on an
interface may consist of any combination of
devices subject only to the requirement that
the sum of the Ringer Equivalence Numbers
of all the devices does not exceed 5.
The Ringer Equivalence Number (REN) of
this unit:
(found on the bottom of the unit).
cordless telephone should not be placed
near, or on top of, a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce, or eliminate,
interference.
RF Exposure Warning:
L This product complies with IC radiation
exposure limits set forth for an
uncontrolled environment.
L To comply with IC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches) or
more between product and all person’s
body.
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L For body-worn operation, the handset
must be used only with a non-metallic
accessory. Use of other accessories
may not ensure compliance with IC RF
exposure requirements.
NOTICE:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
Privacy of communications may not be
ensured when using this telephone.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
For assistance, visit www.panasonic.ca/english/support
TGD39xC_(en)_ver021.pdf
33
2016/01/25
33
15:56:52
Useful Information
Warranty
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
EXCHANGE PROGRAM
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under
normal use and for a period as stated below from the date of original purchase agrees to, at its option either
(a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent
value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by
Panasonic Canada Inc.
Telephone Accessory / Product
One (1) year
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a
Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and
purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you
in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT
OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF
PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or
failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, improper
batteries, power line surge, lightning damage, modification, introduction of sand, humidity or liquids,
commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by
anyone other than a Authorized Servicer, or damage that is attributable to acts of God.
Rechargeable batteries are warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this
warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to
media or images, data or other memory or recorded content. This list of items is not exhaustive, but for
illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be
applicable. This warranty gives you specific legal rights and you may have other rights which vary depending
on your province or territory.
CONTACT INFORMATION
For product information and operation assistance, please visit our Support page:
www.panasonic.ca/english/support
For defective product exchange within the warranty period, please contact the original dealer.
34
TGD39xC_(en)_ver021.pdf
For assistance, visit www.panasonic.ca/english/support
34
2016/01/25
15:56:52
Index
Index
A
B
C
D
E
F
G
H
Additional handset: 4
Alarm: 20
Answering calls: 12
Answering system
Call screening: 27
Erasing messages: 25, 26, 27
Greeting message: 25
Greeting only: 27
Listening to messages: 25, 26
Number of rings: 27
Recording time: 27
Remote access code: 26
Remote operation: 26
Ring count: 27
Toll saver: 27
Turning on/off: 25
Auto talk: 12, 19
Battery: 8
Booster (Clarity booster): 10
C.WTG (Call Waiting Deluxe): 23
Call block: 20
First ring: 21
Call share: 13
Call waiting: 12
Call Waiting Caller ID: 12
Caller ID service: 23
Caller list: 24
Caller list edit: 24
Chain dial: 15
CID (Caller ID): 24
Conference calls: 13
Customer support: 19
Date and time: 10
Dialing mode: 10
Direct command code: 17
Display
Contrast: 19
Language: 10
Eco mode: 9
Error messages: 29
Flash: 12, 19
Groups: 14
Handset
Deregistration: 22
Name: 21
Registration: 22
Hold: 12
I
K
L
M
N
P
R
S
T
V
W
Intercom: 13
Key tone: 19
Line mode: 19
Making calls: 12
Mute: 12
Night mode: 20
Pause: 12
Phonebook: 14
Privacy mode: 19
Redialing: 12
Ringer ID: 14
Ringer tone: 18
Rotary/pulse service: 13
Speed dial: 15
SP-PHONE (Speakerphone): 12
Talking Caller ID: 23
Temporary tone dialing: 13
Time adjustment: 18
Transferring calls: 13
Troubleshooting: 29
VM (Voicemail): 28
Voice guidance language: 10
Voicemail: 28
Volume
Receiver: 12
Ringer (Base unit): 12
Ringer (Handset): 12, 18
Speaker: 12
Wall mounting: 32
35
TGD39xC_(en)_ver021.pdf
35
2016/01/25
15:56:52
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
© Panasonic System Networks Co., Ltd. 2016
Printed in Malaysia
*PNQX8061ZA*
*PNQX8061ZA*
PNQX8061ZA
TGD39xC_(en)_ver021.pdf
36
2016/01/25
15:56:52
TT0116MU0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising