Product Overview
Product Overview
HMO3000 Series
Mixed Signal Oscilloscopes
500 MHz | 400 MHz | 300 MHz
200 MHz | 150 MHz | 100 MHz | 70 MHz
2 GSa/s real time, low noise flash A/D converter
2 MPts memory,
oom up to 50,000:1
MSO functionality included, HO3508 logic probe
with 8 logic channels required
C omponent tester for capacitors, inductors
and semiconductors
4 GSa /s real time, low noise flash A /D converter
8 MPts memory,
oom up to 200,000:1
MSO functionality included, HO3508 / HO3516 logic probe
with 8 / 16 logic channels required
Automatically or manually adjustable memory depth
300 MHz | 400 MHz >>> 500 MHz
HMO Compact Series
E
Elektronik
Product of the Year
The HMO3000 series is future-proof
due to bandwidth upgrade option
HOO352 / 354 – HOO452 / 454
2012
HMO1024
No. 1 in Category
Test + Measurement
All HMO Oscilloscopes Feature:
V
ertical sensitivity 1 mV/div.
O ffset control 0.2V to ±20 V (HMO3000 / HMO202x / HMO152x only)
Trigger modes: slope, video, pulsewidth, logic, delayed, event, hold-off*
Serial bus trigger and hardware accelerated decode including list view.
Options: I2C + SPI + UART/RS-232 (HOO10/HOO11), CAN + LIN (HOO12)
Auto-measurement: 6 parameters incl. statistic, formula editor, ratio cursor
6-digit hardware counter
P ass/fail test based on masks
Real-time FFT (dBm, dBV, Vrms), up to 64 kPts
Automatic search for user-defined events
Display range: 12 div. x-Axis, 20 div. y-Axis
(VirtualScreen)
*HMO3000 models only
*
*HMO300x, HMO202x, HMO152x only
HMO3000 Series
HMO series at a glance:
Bandwidth
Model: 4 channel
2 channel
HMO Compact Series
500 MHz
400 MHz
300 MHz
200 MHz
150 MHz
100 MHz
70 MHz
HMO3054
HMO3052
HMO3044
HMO3042
HMO3034
HMO3032
HMO2024
HMO2022
HMO1524
HMO1522
HMO1024
HMO1022
HMO724
HMO722
Sampling rate (per analog channel)
2 GSa/s
1 GSa/s
Maximum sampling rate
4 GSa/s
2 GSa/s
Memory depth per channel
4 MPts.
1 MPts.
Maximum memory
8 MPts.
2 MPts.
16
8
Max number of logic channels
Input impedance
1 MΩ / 50 Ω
1 MΩ / 50 Ω
1 MΩ
V/div. @ 1 MΩ
1 mV/div. to 5 V/div.
V/div. @ 50 Ω
1 mV/div. to 1 V/div.
1 mV/div. to 1 V/div.
DC-offset
•
•
Component tester
–
1 mV/div. to 10 V/div.
n/a
–
•
HOO10 | HOO11 | HOO12 Serial Bus Analysis
for all HMO Series Oscilloscopes
HOO10
Analysis of I2C, SPI and UART/RS-232 signals on analog and logic channels.
Two buses can be analyzed at the same time.
HOO11
Analysis of I2C, SPI and UART/RS-232 signals on all analog channels. Only one bus available for analysis.
HOO12
Analysis of CAN and LIN signals on analog and logic channels for two buses.
Hardware-accelerated signal triggering and decoding in real-time
Decode to ASCII, binary, hexadecimal or decimal format
Powerful trigger to isolate specific data packages
Detailed
oom also available for serial bus analysis
Color-coded content display for intuitive ­and easy analysis
Directly export analyzed data to USB stick as text file
Add serial bus options to the HMO mixed-signal oscilloscopes with
software licence keys at any time
HO3508 | HO3516 Logic Probe
L
ogic probe HO3508 fits to all HMO series oscilloscopes (also available as double pack HO3516)
Probe is not locked to a specific device
8 logic channels are available with each HO3508 in MSO mode
The signal threshold can be adjusted for each probe pod
Trigger to start condition of I2C data
package
HEX decoded CAN bus signal
HMS Series Spectrum Analyzers
Frequency range from 100 kHz to 1.6 GHz /3 GHz
Tracking generator available on HMS1010 /HMS3010:
Frequency range: 5 MHz to 1.6 GHz /3 GHz
Output level: -20 dBm to 0 dBm
Unlock preamplifier option through license-key upgrade (HO3011)*
Spectral purity greater than -100 dBc/Hz (at 100 kHz)
Fast sweep mode: 20 ms to 1000 s
Detectors: auto-, min.-, max.-peak, sample, RMS, average, quasi-peak*
Miscellaneous marker/Δmarker and peak functions
USB for mass-storage, RS-232/USB dual interface for remote control
Fanless device design with fast boot time (less than 8 s)
*not available for HMS1000E
HMS3000 | HMS3010 - 3 GHz Models
HMS1000 | HMS1010 | HMS1000E - 1.6 GHz Models
HMS series
model overview:
HMS3000/3010, HMS1000/1010
HMS1000E
Amplitude measurement range
-114 dBm to +20 dBm
-104 dBm to +20 dBm
-124 dBm (-135 dBm with HO3011)
-104 dBm
100 Hz to 1 MHz, 200 kHz (-3 dB), 200 Hz, 9 kHz, 120 kHz, 1 MHz (-6 dB)
10 kHz to 1 MHz, 200 kHz (-3 dB)
10 Hz to 1 MHz
1 kHz to 1 MHz
Displayed average
noise level
Resolution
bandwidth
Video bandwidth
HZ547
VSWR Bridge 3 GHz
Frequency range:
Impedance:
Directivity:
This unit is used to measure the voltage standing wave ratio (VSWR) and
the reflection ­coefficient of a device under test with an impedance of 50 Ω.
100 kHz to 3 GHz
50 Ω
>28 dB (100 kHz to 300 kHz)
>35 dB (300 kHz to 1 GHz)
>30 dB (1 GHz to 3 GHz)
Reflection loss at DUT port: >20 dB
Insertion loss
IN t OUT:
20 dB (100 kHz to 300 kHz)
IN t OUT:
18 dB (300 kHz to 3 GHz)
IN t DUT:
1.7 dB
DUT t OUT:
16 dB
Max. Power Dissipation:
+26 dBm
Connectors:
N (female)
Accessories supplied: HZ525 (termination 50 Ω 1 W), N male to N male (2 pcs.), carrying case
EMC Precompliance Set 1 GHz | 3 GHz
HO3011 Preamplifier
for HMS Series Spectrum Analyzers
The EMI precompliance sets EMC-PCS1/EMC-PCS3 consist of all necessary
instruments and software to measure typical EMI problems. It includes the
modern spectrum analyzer HMS1000 / HMS3000, the line impedance stabilization network HM6050-2, the HZ530 / HZ540 probe set and the HM Explorer
software for automated measurements.
HMS1000
T
he built-in preamplifier option can be unlocked with a software license key at any time (HMS1000/1010, HMS3000/3010 only)
DANL -135 dBm typ. (100 Hz RBW)
HZ530
HM6050-2
HM6050-2 V-Network, 2 lines (LISN)
HZ530 Near Field Probe Set 1 GHz
Three active broadband probes, designed for 50 Ω inputs of HMS series, powered either by the analyzer or by batteries:
E-field probe
H-field probe
High impedance probe
L
ine impedance stabilization network to measure line-conducted interferences from 9 kHz to 30 MHz (CISPR 16)
115 V and 230 V versions available
Selectable transient limiter
A rtificial hand connector
HZ540 | HZ550 Near Field Probe Set 3 GHz
Near field probe set with built-in preamplifier covering frequency ranges
from 1 MHz to 3 GHz. Designed for the
50 Ω N-connectors of the HMS series.
HZO90 | HZ99 Carrying Case
E-field probe
H-field probe
High impedance probe
µH-field probe (HZ550 only)
Radiation probe (HZ550 only)
Low capacitance probe (HZ540L/HZ550L only)
We recommend the HZ99 carrying case for protection and transport of oscilloscopes (HMO series 3000, HMO2524,
HMO352x) and spectrum analy­zers
(HMS series), the HZO90 carring case
for protection and transport of HMO72x
to HMO202x. The instruments can be
transported conveniently and safely in
the case.
HMC8012 53/4-digit Digital Multimeter
53/4-digit display (480,000 Counts)
Simultaneous display of 3 measurements, e.g. DC + AC + statistics
Up to 200 measurements per second
DC basic accuracy 0.015%
12 measurement functions: DCV, DCI, true RMS, ACV and ACI, frequency, 2- and 4-wire resistance, capacitance, continuity, diode test, temperature, power
Crisp color TFT display for excellent readability
Resolution: 1µV, 100 n A, 1mΩ, 1pF, 1Hz, 0,1 °C
True RMS measurement AC, AC + DC
Mathematic functions: limit testing, minimum/maximum, average, offset, DC power, dB, dBm
Temperature measurements with platinum sensors (PT100/PT500/PT1000)
Data logging in .csv-format to internal memory or USB-stick
Interfaces: USB-TMC and Ethernet (LXI in preparation), optional IEEE-488 (GPIB)
SCPI commands widely compatible with Agilent 34410A
HMP Series Programmable High-Performance Power Supplies
HMP4040 | HMP4030 - Four/Three-Channel Models
Low residual ripple (less than 150 μV) due to linear post-regulators
Real-time voltage, current and watt values
High setting and read-back resolution: 1 mV / 0.1 [0.2, 1.0] mA (current output and model dependent)
FuseLink (electronic fuses) freely combinable for all channels
FuseDelay tuneable up to 250 ms
HMP series
model overview:
Output values
HMP2030 | HMP2020 - Three/Two-Channel Models
EasyArb function directly programmable at the device
Independently adjustable over-voltage protection (OVP) for each channel
Advanced parallel- and serial operation through V/I tracking
Front connectors: 4 mm safety sockets
Rear connectors for all channels including SENSE
RS-232/USB dual interface for remote control via SCPI based commands
HMP4040
HMP4030
HMP2030
HMP2020
4 x 0 V to 32 V / 0 A to 10 A
3 x 0 V to 32 V / 0 A to 10 A
3 x 0 V to 32 V / 0 A to 5 A
1 x 0 V to 32 V / 0 A to10 A,
1 x 0 V to 32 V / 0 A to 5 A
Output power
Channels
384 W
4
188 W
3
HM8143 Three-Channel Arbitrary Power Supply
3
2
HM7042 - 5 Three-Channel Power Supply
2 x 0 V to 30 V/0 A to 2 A
1 x 5 V/2 A (130 W)
Linear regulated power supply, usable as current source and sink
Real-time voltage and current values
Setting and read-back resolution of 10 mV, 1 mA
Advanced parallel- and serial operation
Front connectors: 4 mm safety sockets
SENSE connectors for line loss compensation for all 30 V channels
External modulation of output voltages up to 50 kHz
Free PC Software for remote control and creation of arbitrary waveforms (4096 points, 12 bit)
RS-232/USB dual interface for remote control
2 x 0 V to 32 V / 0 A to 2 A 1 x 0 V to 5.5 V / 0 A to 5 A
Low residual ripple (less than 100 µVrms)
Real-time voltage and current values
Setting and read-back resolution of 10 mV, 1 mA
Advanced parallel- and serial operation
Over current protection (OCP) through adjustable electronic fuse
Front connectors: 4 mm safety sockets
Maximum noise reduction by temperature-controlled fan
Wide measurement range: 1 mW to 8 k W
Voltage range from 100 mV to 500 V, current range from 1 m A to 16 A
Frequency range: DC to 1 kHz
Simultaneous display of voltage, current and power (W, var, VA or power factor) values
Auto-ranging for easy measurement
Suitable for measurements on frequency converters
Monitor output (BNC) shows active power level
RS-232/USB dual interface for remote control, IEEE-488 (GPIB) optional
Free PC software for automated long-term data acquisition included
HM8115-2 Power Consumption Meter (8 kW)
HZ815 Power Adapter
for HM8115-2
Adapter for simple measurement of mains
voltage, current and power consumption to
use with HM8115-2 (10 A fused).
HMF Arbitrary Function Generator
HMF2525 | HMF2550 - 25 MHz /50 MHz Models
HM8134-3 | HM8135
RF- Synthesizer
HM8134-3 | HM8135 - 1.2 GHz /3 GHz Models
HM8118
Frequencyrange:10µHzto25MHz/50MHz
Triangleandrampsignalupto10MHz
Outputvoltage:5mVppto10Vpp(into50Ωload)
Outputimpedancesteplesslyadaptable(1Ωto10kΩ)
Waveformmodes:sine,square,pulse,triangle,rampand
arbitrarywaveforms(incl.standardcurves:whitenoise,
pinknoise,cardiac,exponentialriseandfall,etc.)
Modulationmodes:AM,FM,pulse,PWM,FSK(internalandexternal)
Arbitrarywaveformgenerator:250MSa/s,14bit,256kPts
EasilycreateyourownwaveformsusingstandardPCsoftware
Oscillographicsignaldisplay
FrontUSBtoeasilysaveandrecallwaveformsandsettings
R S-232/USBdualinterfaceforremotecontrol
Fanlessdesign
Frequencyrange:1Hzto1.2GHz/3GHz
Highdynamicoutputpower:-127dBm/-135dBmto+13dBm
Frequencyresolutionof1Hz(accuracy0.5ppm)
Highspectralpurity,realSWEEPmode
Waveformmodes:sine,square,pulse,triangle,ramp
(internalmodulationfrom10Hzto150kHz/200kHz)
Modulationmodes:AM,FM,pulse,Φ,FSK,PSK
BNCconnectorforexternaltimebase(10MHz)
Standard:TCXO(temperaturestability:±0.5x10 -6)
Optional:OCXO(temperaturestability:±1x10 -8)
RS-232/USBdualinterfaceforremotecontrol
LCR Bridge
+
inclusive
TheHM8118includesa4-wireSMDcomponenttestfixture(HZ188)
aswellasa4-wireKelvintestcable(HZ184).
Measurementfrequencyrange:20Hzto200kHz(69steps)
Basicaccuracy:0.05%
Threemeasurementspeeds(fast,medium,slow)
withuptotwelvereadingspersecond
Operationmode:auto,parallelorserial
Measurementfunctions:L,C,R,|Z|,X,|Y|,G,B,D,Q,Ð,Δ,M,N
Transformerparametermeasurement
ProgrammablevoltageandcurrentBIAS:
internal:0Vto5V,0m Ato200m A(resolution:10mV,1m A)
external:0Vto40V(voltageBIASonly)
RS-232/USBdualinterfaceforremotecontrol
Fanlessdesign
HZ181 Four-Wire Test Fixture including Shorting Plate
Optional4-wiretestfixture
includingshortingplate
(forHM8118)forevaluation
ofleadtypedevices.
HZ186 Four-Wire Transformer Test Cable
Optional4-wiretransformertest
cable(forHM8118)fortransformer
measurements.
HM8112 -3 | HM8112 -3S 6½ - digit Precision Multimeter
HM8123 Programmable Counter 3 GHz
Resolution: 100 nV, 100 pA, 100 uR, 0.01°C/F
Frequency range: DC to 300 kHz
High accuracy: DC at 0.003%, AC at 0.08%
True RMS measurement, AC and AC+DC
Various functions: voltage, current, resistance and temperature measurement, frequency (Vac) and diode test
2-wire or 4-wire operation
Measurement intervals from 0.1 s to 60 s
Internal data logger for long-term acquisition
RS-232/USB dual interface for remote control, IEEE-488 (GPIB) optional
HM8112-3S: HM8112-3 incl. scanner card (8+1 channels each 2- and 4-wire)
HM8150 Arbitrary Function Generator 12.5 MHz
Measurement range: 0 Hz to 3 GHz
2 measurement inputs DC to 200 MHz, 1 measurement input 100 MHz to 3 GHz
Input impedance A/B: 1 MΩ/50 Ω (switchable), sensitivity 25 mVrms
Input impedance C: 50 Ω, sensitivity 30 mVrms
400 MHz time base with 0.5 ppm stability
10-digit resolution at 10 s gate time
9 measurement functions, external gate and arming
Input for external time base (10 MHz)
Standard:TCXO (temperature stability: ±0.5 x 10 -6)
Optional: OCXO (temperature stability: ±1 x 10 -8)
RS-232/USB dual-interface, optional IEEE-488 (GPIB)
Frequency range: 10 mHz to 12.5 MHz
Output voltage: 10 mVpp to 10 Vpp (into 50 Ω)
Waveforms: sine wave, square wave, triangle, pulse, sawtooth, arbitrary
Rise and fall time less than 10 ns
Pulse width adjustment: 100 ns to 80 s
Arbitrary waveform generator 40 MSa/s
Burst, gating, external triggering, sweep
Free of charge software for remote control and for creation of arbitrary waveforms
External amplitude modulation (bandwidth 20 kHz)
RS-232/USB dual-interface, optional IEEE-488 (GPIB)
HAMEG Modular System Series 8000
4¾ -digit
programmable
multimeter HM8012
LCR-meter
HM8018
1.6 GHz universal
counter HM8021-4
10 MHz function
generator HM8030-6
In many years of practical application the HAMEG modular system series 8000 has proven its value to the customer. The advantages of this modular system have been demonstrated by several 100,000 modules sold. The
unexcelled price-performance ratio and the enormous flexibility of the plug-in system allow you to adapt your
measurement ­setups quickly and cost effectively to changing requirements. The mainframe allows the simultaneous operation of two modules.
HO730 Dual Ethernet/USB Interface
thernet 10 /100 MBit/s with integrated web server
E
Remote control over web server interface
USB 2.0 standard, USB type B connector
For all devices of series HMF, HMO, HMP and HMS
Triple power supply
HM8040-3
Blank module HM800
Mainframe HM8001-2
HO740 IEEE-488 (GPIB) Interface
24-pin connection in accordance with IEEE-488 (GPIB) (socket)
Galvanic separation of test device and interface
For all devices of series HMF, HMO, HMP and HMS
HZ350 400 MHz Passive Probe
HZO20 High Voltage Probe
Attenuation ratio:10:1
Bandwidth:
400 MHz
Rise time:
<1.0 ns
Input impedance:10 MΩ II 12 pF
Max. voltage:
400 V (DC + peak AC)
Probe factor identification: automatically after plugging
HZO50 | HZO51 AC/DC Current Probes
500 MHz Passive Probe
Attenuation ratio:10:1
Bandwidth:
500 MHz
Rise time:
<700 ps
Input impedance: 10 MΩ II 9.5 pF
Max. voltage:
400 V (DC + peak AC)
Probe factor identification: automatically after plugging
HZO30 1 GHz Active Probe
Attenuation ratio: 10:1
Bandwidth:
1 GHz
Rise time:
600 ps
Input impedance: 1 MΩ II 0.9 pF
Max. input voltage: 20 V
Input dynamic range: ±8 V
Oscilloscope input coupling: 50 Ω
HZO50
HZO51
Measurement range:
Accuracy:
Bandwidth:
Resolution:
Output voltage:
Load impedance:
Max. voltage:
±20 A rms /30 A p
±1 % / ±2 mA
DC to 100 kHz (0.5 dB)
±1 mA
100 mV / A
› 100 kΩ II ≤ 100 pF
300 Vrms (AC or DC)
±100 A rms / 1,000 A rms
±1 % / ±0.1 A / ±0.5 A
DC to 20 kHz
±100 mA / ±500 mA
10 mV / A / 1mV / A
› 100 kΩ II ≤ 100 pF
300 Vrms (AC or DC)
HZ42 | HZ43 | HZ46 | HZC95 | HZO91 | HZP91 19“ Rackmount Kit
HZO40 | HZO41 Active Differential Probes
Bandwidth:
Attenuation ratio:
Rise time (10…90 %):
Gain accuracy:
Max. input voltage per input:
Max. differential input
voltage (DC + peak AC):
Max. common mode input voltage:
Input impedance
Between inputs:
Each input to ground:
Output voltage (into 50 Ω):
Offset (typical):
CMRR (typical):
Battery operation:
Battery life (typical):
HZ115
HZO40
200 MHz
10:1
1.75 ns
±1 %
±60 V
±20 V
±60 V
HZO41
800 MHz
10:1
437 ps
±2 %
±40 V
±15 V
±30 V
1 MΩ II 3.5 pF
500 kΩ II 7 pF
200 kΩ II 1 pF
100 kΩ II 2 pF
±2 V
±2 mV
-80 dB at 60 Hz
-50 dB at 10 MHz
9 V battery 6LR61
7.5 h
±1.5 V
±5 mV
-60 dB at 60 Hz
-15 dB at 500 MHz
9 V battery 6LR61
4.5 h
Active Differential High Voltage Probe
Differential input voltage (ACrms):
(DC + peak AC) max.:
Max. input voltage per input:
Attenuation ratio:
Switchable:
Bandwidth:
Rise time:
Input impedance:
Output impedance:
Max. output voltage:
Accuracy after 1 min:
Common mode rejection DC / AC 1 MHz:
Inputs (CAT III):
Battery operation:
1,000 V
±1,400 V
±1,400 V
100:1
1,000:1
20 / 30 MHz
17 / 12 ns
60 MΩ II 1.5 pF
50 Ω
±1.5 V at 1 MΩ
±3 % (18 °C to 30 °C)
70 dB / › 50 dB
2 safety connectors
9 V battery 6LR61
HAMEG OSCIlloscopes are
www.scope-of-the-art.com
HZ42 2 RU:
88 mm
Dimensions (W x D):
482 x 360 mm*
(for Series 8100, HM8143, HM7042-5, HM8001-2, HMP2020, HMP2030 and HMF series) case height 75 mm
HZ43 3 RU:
132.5 mm
Dimensions (W x D):
482 x 360 mm*
(for HM6050-2, HMP4030, HMP4040) case height 125 mm
HZ46 4 RU:
177 mm
Dimensions (W x D):
482 x 170 mm*
(for HMO series 3000 and HMS series) case height 175 mm
HZC95 2 RU:
88 mm
Dimensions (W x D):
482 x 282 mm*
(for HMC8012) case height 88 mm
HZO91 4 RU:
177 mm
Dimensions (W x D):
482 x 110 mm*
(for HMO72X, HMO102X, HMO152X, HMO202X) case height 175 mm
HZP91 4 RU:
Dimensions (W x D):
177 mm
482 x 360 mm*
(for HMP4030, HMP4040) case height 125 mm
*plus excess of the instrument
Great Value in
Test & Measurement
HAMEG Instruments GmbH | Industriestr. 6 | D-63533 Mainhausen | Germany
Phone: +49 (0) 61 82 80 00 | info@hameg.com | www.hameg.com | blog.hameg.com
4A-D000-0428 / 16072013 / C&E · Subject to change without notice · © HAMEG Instruments GmbH® · DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HZ355
Attenuation ratio: 1,000:1
Bandwidth:
400 MHz
Rise time:
<900 ps
Input impedance: 50 MΩ II 7.5 pF
Max. voltage:
1,000 Vrms
Probe factor identification: automatically after plugging
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising