APS910 - Audix Microphones
APS910
Phantom Power
Adapter
OVERVIEW
The APS910 is a professional phantom power adapter designed to convert 9-52 volts
of phantom power to 2.5 volt electret microphones with an internal impedance
converter and internal load. It’s supplied with a wide range of Audix electret
condenser microphones.
Features include immunity from RF, low noise circuitry, gold plated input and output
connectors, RoHS compliant. The APS910 is manufactured with a precision die cast
zinc alloy, durable black E-coat finish and gold plated XLR connectors.
INCLUDED PRODUCTS
The APS910 phantom power adapter is provided with the
following Audix microphones:
·· ADX Series - ADX20iP, ADX40 & ADX60
·· Instrument Microphones - MicroD, MicroHP and f90
FEATURES
COMPATIBILITY
·· Gold plated XLR connectors
The APS910 phantom power adapter is also compatible with the
·· Low noise circuitry, low distortion
following Audix microphones:
·· Operates on 9-52 V phantom
·· Instrument Microphone - ADX10FLP
·· Immune to RF
·· Headworn Microphones - ADX10, HT5, HT7BG3P and HG7B3P
·· Able to drive long balanced cable runs
·· Designed, assembled & tested in the USA
·· 1 year warranty
APPLICATIONS
·· Product’s requiring a phantom power
adaptor with a mini 3 pin XLRm connector.
APS910
Frequency Response
20Hz - 20 kHz
The phantom power adapter shall be circular in shape in order to be discreetly
Output Resistance
200 Ω
placed on a solid floor surface or on a stage. The phantom power adapter
Input Resistance
>50k Ω
shall operate at phantom power voltages between 9-52 volts and convert to
Power Requirements
9-52 V phantom
2.5 volts for electret microphones with an internal load. The phantom power
DC Output Voltage
2.5 BDC
adaptor shall have a mini XLRm input connector on one end and a standard
DC Current
2mA maximum
Voltage Gain
>-0.3 dB
Distortion
<0.03% @ 1 kHz, 100mVrms
input <1% @ 1kHz, 1Vrms input
Connector
Gold plated XLR
Length
64.6 mm / 2.5 in
Weight
170 g / 6 oz
XLRm connector on the opposite end. The connectors shall be gold plated.
The circuit board will consist of ROHS surface mount components and utilize
lead free solder paste. The distortion level shall be less than .03% at 1 kHz with
100mV rms input voltage and less than 1% at 1kHz with 1V rms input voltage.
The weight shall be 6 oz with dimensions of 2.5 inches x .79 inches in diameter.
OPERATION AND MAINTENANCE
The APS910 is very simple to use. Before plugging cables into the APS910, be
DIMENSIONS (mm)
sure that the mixing console is either off or muted. The cable from the microphone will terminate in a mini XLR female connector. Plug this connector into
the small end of the APS910 which has a 3 pin mini-XLR male connector. The
pins must match for a successful connection; there is a keylock for the correct
location. The other end of the APS910 is a standard XLR male. This mates with a
standard microphone cable. The XLR female side of the microphone cable will
plug into the APS910. Similarly, there is a keylock to guide the connection. To
disconnect either side push down on the spring release on the connector with
your thumb and the cable can be disengaged.
FREQUENCY RESPONSE
PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml.
SERVICE AND WARRANTY: This microphone is under warranty for a period of 3 years to be free of defects in material and workmanship. In the event of a product failure due to materials or
workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes
any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No
Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any,
for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of
any kind. Should your microphone fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN
THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL
NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX’S
SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
www.audixusa.com
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
503.682.6933 Fax: 503.682.7114
Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070
ver 4 06-17
APS910
ARCHITECT AND ENGINEER SPECIFICATIONS
SPECIFICATIONS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising