General Specifications
<<Contents>> <<Index>>
General
Specifications
YFGW510
Field Wireless Access Point
GS 01W02E01-01EN
GENERAL
This General Specification(GS) describes the
hardware specifications for Field Wireless Access
Point and specifications of attached software. This
product is based on wireless communications
standard ISA100.11a for industrial automation of
International Society of Automation (ISA). This product
has backbone router function based on ISA100.11a,
and combining this with Field Wireless Management
Station (YFGW410) and/or Field Wireless Media
Converter (YFGW610) composes the field wireless
system.
For outline of a field wireless system, and details
of each product, see related product General
Specifications.
FEATURES
●High-performance, compact industrial wireless access point
This product is an industrial wireless access point, compact and lightweight and supporting multiple wireless
standards. Enabling you to build a robust field wireless network, the access point provides reliable communication.
●Duocast (ISA100.11a Standard)
This product supports the “Duocast” function of ISA100.11a standard. Enabling simultaneous communication with two
YFGW510s, thereby creating a redundant communication path, increasing the reliability of the field wireless network.
●Wireless LAN (IEEE802.11a/b/g)
This product has a dual band wireless LAN communication Function (2.4 GHz and 5 GHz) in a field wireless
backbone. The wireless LAN in field wireless backbone enables a design flexible to the field wireless network of a
wide area.
Yokogawa Electric Corporation
2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan
Tel.: 81-422-52-5690 Fax.: 81-422-52-2018
GS 01W02E01-01EN
1st Edition July 2012 (KP)
7th Edition Oct. 2016 (KP)
2
<<Contents>> <<Index>>
HARDWARE SPECIFICATIONS
■ Communication Interface
Item
Communication
Interface
Communication
Protocol
*1:
*2:
*3:
*4:
*5:
*6:
*7:
Standard
Frequency
Field Network
Specifications
IEEE802.15.4
2400–2483.5 MHz
Field Wireless Backbone Specifications *1
Raw data rate
Radio Security
RF Transmitter
Power
Connector
250 kbps
AES128 bit
Max 12 dBm *3
IEEE802.11a/b/g *2
b/g: 2400-2483.5 MHz
a: 5150-5850 MHz
1-54 Mbps
WPA2-PSK
Max 18 dBm *3
100BASE-TX
–
100BASE-FX
100 Mbps
–
–
100 Mbps
N type
N type
RJ-45
SC connector
[ single pole × 2 ] *4
Multimode fiber
(50/125 μm or
62.5/125 μm)
Cable Type
coaxial
coaxial
Category 5
Antenna
Remote Antenna
Maximum length
+2 dBi
+2 dBi, +6 dBi, +9 dBi
500 m *5
Port
Protection
Field Wireless
Management,
configuration, etc.
1 port
–
ISA100.11a
–
–
–
+2 dBi, +6 dBi, +9 dBi –
b/g: 500 m *5
100 m
a: 200 m *5
Max 2 port
1 port
–
Surge
–
IEEE1588PTP v2 *6, Proprietary
2000 m
1 port
–
*7
In outdoor wiring to Field Network or 100BASE-FX of Field Wireless Backbone, use optical fiber cables with a nonmetallic
tension member, combining with YFGW610
This product requires a wireless LAN access point for connection with YFGW410 in the wireless LAN in field wireless
backbone.
This is the maximum radio output at N-type connector for antenna connection. Radio output power depends on the region
and the antenna type.
2-pole SC connector cannot be used due to the conduit hole size limitation. SC connector should use Short Boot type.
The maximum length needs perfect conditions without an obstruction for radio wave transmission, using a standard
antenna (2 dBi). The maximum length changes with the environmental conditions and installation situations of a site.
Installation of these multiple product and YFGW410 in one field wireless subnet requires direct connection or the
connection via IEEE1588PTP basis products.
TCP based custom protocol used for communication between this product and YFGW410.
■ Performance
■ Installation Environment
Network Size:
Max 100 field wireless devices are connectable
Display:
2-color luminescence LED displays the operating
state of this product, and the operating state of
wireless communications and cable communications.
Diagnosis Functions:
CPU failures, communication interface malfunctions,
outside the range, abnormal settings.
Software Download Function:
The software inside this product and the software
(communication firmware, sensor firmware) inside
wireless field device can update via YFGW410.
Temperature Range:
Operating:
-40 to +65°C (altitude: up to 3000 m)
Storage:
-40 to +85°C
Humidity Range:
Operating:
5 to 95% RH (non-condensation)
Storage:
5 to 95% RH (non-condensation)
Temperature Gradient:
Operating: ±10°C/h or less
Storage: ±20°C/h or less
Power Supply:
Voltage Range : 10.0-26.4 V DC
Rated Voltage: 24 V DC
Momentary Power Failure: Instant Disconnection
DC Power Supply Ripple Ratio: 1%p-p or less
Power Consumption:
Max. 3.5 W
Degrees of Protection:
IP66, NEMA4X
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 01W02E01-01EN
May 31, 2013-00
3
<<Contents>> <<Index>>
Vibration Resistance:
0.21 mm P-P (10-60 Hz), 3G (60-2k Hz)
Shock Resistance:
50G 11 ms
Noise Resistance:
Electric Field: 3 V/m or less (80 MHz-1 GHz)
Electrostatic Discharges: 4 kV or less (contact
discharge), 8 kV or less(aerial discharge)
Grounding:
Class-D grounding (no sharing ground with others)
Cooling:
Natural Air Cooling
■ Regulatory Compliance Statements
This device contains the wireless module which
satisfies the following standards.
*
Please confirm that an installation region fulfills
an applicable standard. If additional regulatory
information and approvals are required, contact a
Yokogawa representative.
Japanese Radio Law:
Construction Type Certification Number: 007-AA0011
(ISA100.11a), 007-AA0065/66 (Wireless LAN)
R&TTE Conformity Standards:
• Radio Spectrum: EN 300 328, EN 301 893
• EMC: EN 301 489-1, EN301 489-17, EN 61326-1
Class A, Table 2 (For use in industrial locations),
EN 55011 Class A, group 1, EN 61000-6-2
• Health and Safety: EN 62311, EN 61010-1,
Regulation Conformity of the Wireless Module:
• FCC Approval (Part 15C,Part 15E)
• IC Approval (RSS-210)
Safety Requirements:
CSA C22.2 No. 61010-1
■ Physical Specifications
Connections:
Refer to “MODEL AND SUFFIX CODES.”
Housing Material:
Low copper cast aluminum alloy with polyurethane,
mint-green paint (Munsell 5.6BG 3.3/2.9 or its
equivalent)
Name Plate and Tag:
316 SST
Weight:
3.0 kg (without mounting bracket, and process
connector.)
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
SOFTWARE SPECIFICATIONS
■ Field Wireless Access Point Setting Tool
This software is used for a setup and maintenance
of this product. PC on which this software program
installed is connected with this product via infrared
communication.
■ Specifications and System Requirements
Software License:
1 license
Language:
Software (GUI): English
Manual: Japanese or English
Hardware Operating Environment:
Item
Processor
Memory
Hard Disk
Display
Communication
Device
Recommended System Requirement
Intel Core i5-2520M or equivalent, or higher
2 GB or more
40 GB or more
(Minimum free space 15 GB or more)
Color: True Color (32 bits or more)
Resolution: 1280 x 800 or higher
Ethernet Network Card
Software Operating Environment
*1,*2
:
OS
Windows 10 Pro*3
Windows 8.1 Pro Update*4
Windows 7 Professional Service Pack 1*4
Windows Server 2012 R2 Standard Update*4
Windows Server 2008 R2 Enterprise Service Pack 1*4
Windows Server 2008 Enterprise Service Pack 2*4
*1:
*2:
*3:
*4:
Type
32/64 bit
32/64 bit
32/64 bit
64 bit
64 bit
32 bit
Japanese version and English version are
supported.
For 64 bit OS, WOW64 (Windows 32-bit On
Windows 64-bit) can be performed.
Microsoft .NET Framework 4.6 is required.
Microsoft .NET Framework 4.5.2 is required.
GS 01W02E01-01EN
Mar. 10, 2016-00
4
<<Contents>> <<Index>>
MODEL AND SUFFIX CODES
Model
Suffix Codes
Description
YFGW510 ������������������������������������������������������������������� Field Wireless Access Point
Output
signal
-A���������������������������������������������������������������� ISA100.11a
-C���������������������������������������������������������������� ISA100.11a, IEEE802.11a/b/g *1
Communication 1������������������������������������������������������������ 100 BASE-TX
interface
2������������������������������������������������������������ 100 BASE-FX
5������������������������������������������������������������ Wireless LAN
1�������������������������������������������������������
0��������������������������������������������������
2��������������������������������������������������
4��������������������������������������������������
5��������������������������������������������������
7��������������������������������������������������
9��������������������������������������������������
A��������������������������������������������������
C��������������������������������������������������
D��������������������������������������������������
--A���������������������������������������������
License
-S���������������������������������������
Manual language
0�����������������������������������
1�����������������������������������
Software media
0������������������������������
1������������������������������
Mounting bracket
B��������������������������
Housing
Electrical
Connection
Low copper cast aluminum alloy
G1/2 female, two electrical connections, without blind plugs
1/2 NPT female, two electrical connections, without blind plugs
M20 female, two electrical connections, without blind plugs
G1/2 female, two electrical connections, one blind plug *1 *2
1/2 NPT female, two electrical connections, one blind plug *1 *2
M20 female, two electrical connections, one blind plug *1 *2
G1/2 female, two electrical connections, one 316 SST blind plug *1
1/2 NPT female, two electrical connections, one 316 SST blind plug *1
M20 female, two electrical connections, one 316 SST blind plug *1
Always A
Software license
Japanese
English
Provided with DVD-ROM
None
304 SST 2-inch pipe mounting (for horizontal piping) *3
D�������������������������� 304 SST 2-inch pipe mounting (for vertical piping) *3
J�������������������������� 316 SST 2-inch pipe mounting (for horizontal piping) *3
K�������������������������� 316 SST 2-inch pipe mounting (for vertical piping) *3
N�������������������������� None
ISA100.11a antenna
1��������������������� Detachable antenna 2 dBi (2.4 GHz)
A��������������������� Antenna adaptor: N-type connector *4 *5
Wireless LAN antenna (1)
*6
N���������������� None
3���������������� Remote antenna 2 dBi (2.4 GHz), antenna cable 3 m with mounting bracket
4����������������
Remote antenna 2 dBi (2.4 GHz, 5 GHz), antenna cable 3 m with mounting
bracket
A���������������� Antenna adaptor: N-type connector *4 *5
Wireless LAN antenna (2) *6
N������������ None
3������������ Remote antenna 2 dBi (2.4 GHz) , antenna cable 3 m*7 with mounting bracket
4������������
Remote antenna 2 dBi (2.4 GHz, 5 GHz), antenna cable 3 m*7 with mounting
bracket
A������������ Antenna adaptor: N-type connector *4 *5 *7
---
A������� Always A
---
A�� Always A
Option codes
/Optional specifications
*1:Select in a wireless LAN client (communication interface code 5).
*2:Select if optional specification KF27 or SF27 is not specified.
*3:A bolt is required for wall attachment.
*4:Select an antenna and a remote antenna cable. For details, refer to the accessory.
*5:In order for the wireless output of an antenna to get the maximum which the area permits, adjustment by service of Yokogawa is
required.
*6:Wireless LAN antenna must be connected to this product by using external antenna cables.
*7:Select only by 3, 4, and A of Wireless LAN antenna (1).
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 01W02E01-01EN
Mar. 10, 2016-00
5
<<Contents>> <<Index>>
OPTIONAL SPECIFICATION (For Explosion Protected type)
Item
Factory Mutual
(FM)
Canadian
Standards
Association (CSA)
ATEX
IECEx
Description
FM Nonincendive Approval
Applicable standards: Class 3600:2011, Class 3611:2004, Class 3810:2005, NEMA 250:2003
Nonincendive for Class I, Division 2, Groups A, B, C and D; alternatively for Class I, Zone 2, Groups
IIC. Suitable for Class II, Division 2, Groups F and G; Suitable for Class III, Division 1
Indoor/outdoor Type 4X in hazardous (classified) locations.
Temperature Class T4 at Ta = –40°C to 65°C
Explosionproof Approval
CSA Non-Incendive Approval
Certificate: 2655412
Applicable standards: C22.2 No.0-10, CAN/CSA-C22.2 No. 0.4-04,
CAN/CSA-C22.2 No. 94-M91, C22.2 No. 213-M1987, CAN/CSA-C22.2 No. 60079-0:11,
CAN/CSA-C22.2 No. 60079-15:12, CAN/CSA-C22.2 No. 61010-1-04, IEC 60529 :2001
Non-Incendive for Class I, Division 2, Groups A, B, C and D;
Class II , Division 2, Groups F and G; Class III, Division I
Non-Incendive Field Wiring Connections for Class I , Division 2,
Groups A, B, C, D;
Ex nA [nL] IIC T4.
Ambient Temperature: –30 °C to +65 °C, Altitude: ≤ 3000m
Enclosure: Type 4X, IP66
Cable parameters for antenna connection:
Ccable: ≤ 4 nF, Lcable: ≤ 20 μH
Flameproof Approval
ATEX Type n declaration
Applicable standard: EN60079-0: 2012+A11:2013, EN 60079-11:2012, EN 60079-15:2010
II 3 G Ex nA [ic] IIC T4 Gc
Enclosure: IP66
Amb. Temp.(Tamb): –30 to 65°C (–22 to 149°F)
ATEX Flameproof Approval
Certificate: DEKRA 15ATEX0042 X
Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-1:2007, EN 60079-11:2012
II 2 G Ex d [ib] IIC T4 Gb
Um: 250 V
Amb. Temp.(Tamb): –40 to 65°C (–40 to 149°F)
IECEx Type n Approval
Certificate: IECEx DEK 14.0028
Applicable standard: IEC60079-0:2011, IEC60079-11:2011, IEC60079-15:2010
Ex nA [ic] IIC T4 Gc
Enclosure: IP66
Amb. Temp(Tamb): -30 to 65°C (-22 to 149°F)
IECEx Flameproof Approval
Certificate: IECEx DEK 15.0021X
Applicable Standard: IEC 60079-0:2011, IEC 60079-1:2007, IEC 60079-11:2011
Ex d [ib] IIC T4 Gb
Um: 250 V
Amb. Temp.(Tamb): –40 to 65°C (–40 to 149°F)
Code
FN17
–
CN17
–
KN27
KF27
SN27
SF27
OPTIONAL SPECIFICATIONS
Item
Coating
Coating change
Description
High anti-corrosion coating
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
Code
X2
GS 01W02E01-01EN
Oct. 1, 2016-00
6
<<Contents>> <<Index>>
ACCESSORY
Item
Remote antenna cable
Parts Number
Description
F9915KU
3 m with mounting bracket
F9915KV
13 m (3 m+10 m) with arrestor and mounting bracket
Antenna
F9915KW
2 dBi Standard Antenna (2.4 GHz) *1
F9915KY
6 dBi High gain antenna (2.4 GHz) *2
F9195VG
9 dBi High gain antenna (2.4 GHz) *2
F9195VA
2 dBi Standard Antenna (2.4 GHz, 5 GHz) *1
*1:Standard antenna cannot perform direct connection to this product at wireless LAN.
*2:High gain antenna cannot perform direct connection to this product.
APPEARANCES
■ Communication interface: 1, 2 ■ Communication interface: 5
Wireless LAN Antenna (1) :
N
Wireless LAN Antenna (2) :
N
Wireless LAN Antenna (1) :
3, 4, A
Wireless LAN Antenna (2) :
N
F01.ai
■ Communication interface: 5
Wireless LAN Antenna (1) :
3, 4, A
Wireless LAN Antenna (2) :
3, 4, A
F02.ai
F03.ai
The cover is attached to N-type connector of the antenna. The cover is detached in connection of an antenna and
external antenna cable.
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 01W02E01-01EN
Mar. 10, 2014-00
7
<<Contents>> <<Index>>
EXTERNAL DIMENSIONS
■ 2-inch pipe mounting (for horizontal piping)
Unit: mm
150
108
2-inch
pipe
Ø110
135
2-inch pipe
Mounting
bracket
98
Electrical
connection
104
61
3
142
Terminal cover
Ø110
Amp. Cover
296
Status injector
LED
24
51
Ground
terminal
75
57.5
250.75
134
*1
F04.ai
*1:In the case of selecting 3, 4, and A in Wireless LAN antenna (1): 167 mm
In the case of selecting 3, 4, and A in Wireless LAN antenna (1) or (2): 204 mm
■ 2-inch pipe mounting (for vertical piping)
134*1
108
70.3
Terminal
cover
Ø110
135
Ø110
Amp.
Cover
296
142
Status injector
LED
150
107
2-inch
pipe
2-inch pipe
Mounting
bracket
100.5
53
Electrical
connection
107
104
Ground
terminal
98
57.5
75
F05.ai
*1:In the case of selecting 3, 4, and A in Wireless LAN antenna (1): 167 mm
In the case of selecting 3, 4, and A in Wireless LAN antenna (1) or (2): 204 mm
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 01W02E01-01EN
Mar. 10, 2014-00
8
<<Contents>> <<Index>>
■ Antenna
•Standard Antenna
(F9915KW)
Directional: Nondirectional
Gain: 2 dBi
•High gain antenna
(F9915KY)
Directional: Nondirectional
Gain: 6 dBi
•High gain antenna
(F9195VG)
Directional: Nondirectional
Gain: 9 dBi
•Standard Antenna
(F9195VA)
Directional: Nondirectional
Gain: 2 dBi
Ø16
Ø21
Ø21.8
800
500
117
130
Ø14
Ø21.8
19
Ø21
19
F06.ai
F09.ai
25
Ø26
25
Ø26
F07.ai
F08.ai
■ Remote antenna cable
• Cable 3 m
• Cable 13 m
Antenna extension cable 2
Length 10 m
Arrestor
Antenna extension cable
Length 3 m
Antenna extension cable 1
Length 3 m
F10.ai
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
F11.ai
GS 01W02E01-01EN
Mar. 10, 2014-00
9
<<Contents>> <<Index>>
■ Antenna mounting bracket
68
(2.68)
88 (3.46)
292 (11.50)
135 (5.31)
72 (2.83)
17
(0.67)
18
(0.69)
2-inch pipe (O.D. 60.5 mm)
98 (3.86)
F12.ai
INFRARED CONFIGURATION
Infrared port
F13.ai
TERMINAL CONFIGURATIONS
■ Communication Interface: 1
100BASE-TX
Ground
terminal
■ Communication Interface: 2
Ground
terminal
Ground
terminal
24 V DC +
24 V DC −
24 V DC +
24 V DC −
24 V DC +
24 V DC −
■ Communication Interface: 5 *1
100BASE-FX
Electrical
connection
Electrical
connection
Communication
connection
F14.ai
*1:
Electrical
connection
Communication
connection
Blind plug
F15.ai
F16.ai
Don’t use the 100 BASE-TX connection by RJ-45 connector.
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
GS 01W02E01-01EN
Mar. 10, 2014-00
10
<<Contents>> <<Index>>
ORDERING INFORMATION
Specify the following when ordering
1. Model, suffix codes, and option codes
2. Tag Number (if required)
Specify Tag number (up to 16 letters) to be
engraved on the tag plate. The specified letters
are written on TAG_Name (16 letters) in the
memory.
TRADEMARK
YFGW is a registered trademark of Yokogawa
Electric Corporation. Other product and company
names appearing in this document are trademarks or
registered trademarks of their respective holders.
RELATED PRODUCTS GENERAL
SPECIFICATIONS
Field Wireless System Overview :
Refer to GS 01W01A01-01EN
Field Wireless Management Station YFGW410:
GS 01W02D01-01EN
Field Wireless Media Convertor YFGW610:
GS 01W02D02-01EN
All Rights Reserved. Copyright © 2012, Yokogawa Electric Corporation
Subject to change without notice.
GS 01W02E01-01EN
Mar. 10, 2014-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising