Specifications
Fluke 6500-2 technical specification – February 2014
Specifications
Test Specifications
The accuracy specification for the display range is defined as ±(%reading + digit
counts) at 23 °C ±5 °C, ≤75 % RH.
Between 0 °C and 18 °C and between 28 °C and 40 °C, accuracy specifications may
degrade by 0.1 x (accuracy specification) per °C.
The measurement range meets the service operating errors specified in EN615571: 1997, EN61557-2: 1997, EN61557-4: 1997, EN61557-6: 1997, DIN VDE0404-2.
Power-on Test
Earth Bond Test (Rpe)
Insulation Test (Riso)
Touch Current Test
Substitute Leakage
Current Test
The test indicates reversed L-N, missing PE, and measures the mains voltage and
frequency.
Display Range
90 V to 264 V
Accuracy at 50 Hz
± (2% + 3 counts)
Resolution
0.1 V
Input Impedance
> 1 MΩ // 2.2 nF
Maximum Input Mains
Voltage
264 V
Display Range
0 to 19.99 Ω
Accuracy (After Bond
Test Zeroing)
± (2.5% + 4 counts)
Resolution
0.01 Ω
Test Current
200 mA AC -0% +40% into 1.99 Ω
25 A AC ± 20% into 25 mΩ at 230 V
Open Circuit Voltage
> 4 V AC, < 24 V AC
Bond Test Zeroing
can subtract up to 1.99 Ω
Display Range
0 to 299 MΩ
Accuracy
± (5% + 2 counts) from 0.1 to 300 MΩ
Resolution
0.01 MΩ (0 to 19.99 MΩ)
0.1 MΩ (20 to 199.9 MΩ)
1 MΩ (200 to 299 MΩ)
Test Voltage
500 V DC -0% + 25% at 500 kΩ load or 250 V dc -0 %
+25 % at 250 kΩ load
Test Current
> 1 mA at 500 kΩ load, < 15 mA at 0 Ω
Auto Discharge Time
< 0.5 s for 1 μF
Max. Capacitive Load
Operational up to 1 μF
Display Range
0 to 1.99 mA AC
Accuracy
± (4% + 2 counts)
Resolution
0.01 mA
Internal Resistance (via
Probe)
2 kΩ
Measuring Method
Probe*
Display Range
0 to 19.99 mA AC
Accuracy
± (2.5% + 3 counts)
Resolution
0.01 mA
Test Voltage
100 V AC ± 20%
Load/Leakage Test: Load Display Range
Current
Accuracy
Resolution
Load/Leakage Test: Load Display Range 230 V
Power
Mains
Load/Leakage Test:
Leakage Current
PELV Test
RCD Test: Trip Current
RCD Test: Trip Time
0 A to 13 A
± (4% + 2 counts)
0.1 A*
0.0 VA to 3.2 kVA
Accuracy
± (5 % + 3 counts)
Resolution
1 VA (0 to 999 VA), 0.1 kVA (>1.0 kVA)*
Display Range
0 to 19.99 mA
Accuracy
± (4% + 4 counts)
Resolution
0.01 mA*
Accuracy at 50 Hz
± (2% + 3 counts)
Overload Protection
300 V rms
Warning Threshold
25 V rms
Operational Error
±10 %
Nominal
30 mA
Accuracy
±5 %
Standard Requirement
61557 Part 6; tolerance of rated test current 0 % to
+10 %
Operational Error
±10 %
RCD Type
AC general-purpose 30 mA
Display Range
310 ms
Resolution
0.1 ms
Accuracy
3 ms
Trip Time Limit at 100 % 300 ms
(30 mA)
Trip Time Limit at 500 % 40 ms
(150 mA)
*The appliance under test is energized at mains potential.
Environmental Specifications
Operating Temperature
0 to 40 °C
Relative Humidity
Non condensing < 10 °C
95% from 10 to 30 °C
75% from 30 to 40 °C
Safety Specifications
Safety Rating
Complies with EN61010-1 3rd edition
CAT II, 300 V, pol 2
Mechanical & General Specifications
Size
200 mm (L) x 275 mm (W) x 114 mm (H)
Weight
3.13 kg
Power Supply
230 V +10 % -15 %, 50 Hz ±2 Hz or (6500-2 only: 110V +10 % -15 %,50 Hz ±2 Hz)
Power Consumption
(Tester)
13 W typical (idle)
60 W max. during 25A Bond test
Storage
Temperature
-10 to 60 °C
Corrosion
70 °C @ 95 % RH for 5 days max.
Operating Altitude
0 up to 2000 m
Sealing
IP-40 (enclosure), IP-20 (connectors)
EMC
Complies with EN61326-1, portable
EMI Immunity
3 V/m
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising