OmniSwitch 6865 Hardened Ethernet Switches Switches designed

OmniSwitch 6865 Hardened Ethernet Switches Switches designed
Data Sheet
Alcatel-Lucent
OmniSwitch 6865
Hardened Ethernet switches
The Alcatel-Lucent OmniSwitch 6865®is a family of ruggedized, advanced Layer 3, scalable
Ethernet switches, designed to operate reliably in the harshest industrial environments and
severe temperatures.
OS6865-U12X
OS6865-P16X
OS6865-U28X
OS6865 switches are rugged, high
bandwidth switches that are ideal for
industrial and mission-critical applications
that require wider operating temperature
ranges, stringent EMC/EMI requirements
and an optimized feature set for high
security, reliability, performance and easy
management. These switches run on the
widely deployed and field-proven AlcatelLucent Operating system offering SPB-M
based VPNs and other advanced routing
and switching capabilities.
The OS6865 series offers a unique mix of
features to cater to the Hardened Ethernet
applications HPoE for (75W PoE) for
those power hungry devices on the access
network, SPB-M for fast, cost-efficient
roll-out of VPN services on the edge and
a comprehensive suite of security features
to secure the network edge. These switches
are easy to deploy with Alcatel Lucent’s
award winning Intelligent-Fabric technology
which offers out-of-the-box plug-and-play,
Zero-touch provisioning and network
automation. These switches are future
ready with the HW designed to support
IEEE 1588v2 PTP capabilities for timing
requirements of industrial devices. The
OS6865 family offers advanced system
and network level resiliency features and
convergence through standardized protocols.
These versatile industrial switches are
ideal for deployment in transportation
and traffic control systems, power utilities,
video surveillance systems and outdoor
installations.
FEATURES
BENEFITS
• Resilient ruggedized hardware design
• Operates at a wider temperature range from -40°C to +74°C, withstands greater
shock, vibrations, temperature and EMI/EMC variance
• Convection cooled fan-less models
• Fan-less operations increases resiliency and maximizes uptime for converged
mission-critical networks
• Advanced Industrial PoE capabilities with
support for HPoE (75 W)
• Enables converged deployments and is ideal for all type of PoE application
requirements from outdoor wireless APs, to PTZ surveillance cameras and video
displays
• SPB-M Support for Scalable network
virtualization architecture over standard
Ethernet fabric
• Optimizes/simplifies Layer 2 and Layer 3 network designs and reduces
administration overhead
• Virtual Chassis technology, to connect multiple
switches to create a single chassis-like entity
• Increases system redundancy, resiliency and high availability while simplifying
deployment, operations and management of the network
• Auto-fabric technology to simplify installation
and service provisioning
• Enables Zero-touch provisioning and network automation with auto- matic protocol
and topology discovery
• Prevent human mistakes by automating standardized and replicable configurations
• Built in resiliency & redundancy
• Hot-swappable, fully redundant power supplies
• Delivers redundant ring topologies using
industry standard protocols
• Field upgradable, highly redundant network solution maximizes network uptime
• SDN Ready
¬¬ OpenFlow and OpenStack support
¬¬ Supports RESTful APIs commands & MIBs
¬¬ Embedded scripting capabilities
• The support of SDN allows creation of specialized services which ensures that your
investment is ready for the future and enables interoperability with third-party
solutions
• REST APIs provides access to all AOS CLI and with advanced embedded scripting
capabilities using Python and Bash, it enables fast deployment of new network
services and be able to continuously adopt new applications to support the
business
Alcatel-Lucent OmniSwitch 6865
models
The OmniSwitch 6865 offers customers
Gigabit fixed-configuration switches with
up to 75 watts of PoE per port and power
supply options that accommodate the most
demanding requirements. The switches can
be mounted on wall/panel or a 19-inch rack.
All the models have built-in 10 Gigabit SFP+
ports that support 10 Gigabits and 1000-X, a
USB port and a console port.
All the models of OS6865 family support 4
ports of 75W PoE. OS6865-U28X model also
provides dedicated 20G Virtual chassis ports.
OS6865 switches offer a surge protection of
6KV on all copper ports.
GIGABIT
PORTS (RJ45)
SFP PORTS
1G/10G SFP+
PORTS
75W HPOE/
POE+ PORTS
DESCRIPTION
OS6865-P16X
12
2
2
4/8
Fixed-configuration hardened fan-less half-rack width
2RU chassis with twelve 10/100/1000 Base-T PoE+
ports, four of which can support 75W HPoE, two 1000
Base-X SFP ports and two fixed SFP+ (1G/10G) ports
OS6865-U12X
4
6
2
4/-
Fixed-configuration hardened fan-less half-rack width
2RU chassis with four 100/1000 Base-X SFP, two 1000
Base-X SFP, two fixed SFP+ (1G/10G) ports and four
10/100/1000 Base-T 75W HPoE ports.
OS6865-U28X
4
20
4
4/-
Fixed-configuration hardened fan-less full-rack width
1RU chassis with twenty 100/1000 Base-X SFP, four
fixed SFP+ (1G/10G) ports and four 10/100/1000
Base-T 75W HPoE ports.
Alcatel-Lucent OmniSwitch 6865
ALCATEL-LUCENT ENTERPRISE DATA SHEET
2
OmniSwitch 6865 switches can form a
Virtual Chassis between any models creating
a single chassis-like entity using 10G SFP+
ports. Up to 2 switches can be connected in
a Virtual Chassis configuration with option
to scale up to 8 in future, OS6865-U28X also
has dedicated QSFP Virtual Chassis ports
in rear.
Technical specifications
OmniSwitch 6865 models
PRODUCT MATRIX
OS6865-P16X
OS6865-U12X
OS6865-U28X
Operating temperature*
-40°C to 74°C
(-40°F to 165°F)
-40°C to 74°C
(-40°F to 165°F)
-40°C to 74°C
(-40°F to 165°F)
Fans
0
0
0
File system flash
2 GB
2 GB
2 GB
RAM
2 GB
2 GB
2 GB
Altitude
13,000 ft
13,000 ft
13,000 ft
Storage temperature
-40°C to 85°C
(-40°F to 185°F)
-40°C to 85°C
(-40°F to 185°F)
-40°C to 85°C
(-40°F to 185°F)
Humidity (operating & storage)
5% to 95% non-condensing
5% to 95% non-condensing
5% to 95% non-condensing
USB port
1
1
1
Console port
1
1
1
Max raw fabric capacity
224 Gb/s
224 Gb/s
224 Gb/s
Switching capacity
68 Gb/s
60 Gb/s
208 Gb/s
Weight (no PS attached)
5.07 kg (11.18 lb)
5.17 Kg (11.40lb)
6.28 Kg (13.85 lbs)
Height
8.81 cm (3.47 in)
8.81 cm (3.47 in)
4.39cm (1.73 in)
Width
21.56 cm (8.49 in)
21.56 cm (8.49 in)
43.99 cm (17.32 in)
Depth (no PS attached)
26 cm (10.24 in)
26 cm (10.24 in)
27 cm (10.63 in)
1588v2 Capable Ports
16
12
28
20G QSFP+ VFL ports
0
0
2
Maximum PoE Budget**
300 W
300 W
280 W
Installation Options
Wall/panel, 19” rack
Wall/panel, 19” rack
19” rack
Power Consumption (idle)***
30 W
29 W
49.6 W
Power Consumption (full load)***
45 W
35.9 W
75.9 W
Heat Dissipation (BTU/hr)***
102.3
98.9
170.6
Maximum surge protection on ports****
6 KV
6 KV
6 KV
MTBF (with 1 AC power supply)
767,181 h
827, 848 h
709,199 h
MTBF (with 2 AC power supply)
1,044,414 h
1,141,692 h
952,763 h
* With airflow. In a sealed enclosure, without airflow, -40°C to +65 °C
** With 2 x AC or 2 x DC (48 V input) power supplies operating at 60°C. Please refer to HW user’s guide for more information on PoE budget.
*** Power consumption measured at 120 VAC input. Full L2 traffic load measurement does not include PoE power consumption. Heat dissipation measured at idle:
1 watt ≈ 3.41214 BTU/h
**** On copper ports
Power supplies
OmniSwitch 6865 supports 1+1 redundant,
hot-swappable fan-less power supplies. It
also supports power load-sharing between
the primary and backup power supplies
can be connected with a cable (included) and
mounted independently using a Power tray.
In a redundant configuration, power supplies
can be installed in any manner AC+AC,
AC+DC or DC+DC.
PS MODELS
OS6865-BP
OS6865-BP-D
Description
Modular AC power supply. Provides up
to 180 W of system & PoE power to one
OS6865 switch
Modular DC power supply. Provides up to 180 W
(48 V input)/140 W (24 V input) of system and
PoE power to one OS6865 switch
Dimensions (H x W x L)
5.1 cm x 9.5 cm x 18.1 cm
(2 in x 3.74 in x 7.12 in)
5.1 cm x 9.5 cm x 18.1 cm
(2 in x 3.74 in x 7.12 in)
Weight
1.42 Kg (3.14 lbs)
1.42 Kg (3.14 lbs)
Input voltage
100 VAC to 240 VAC
-20 VDC to -72 VDC
Input Current
3A/100 V - 127 VAC
1.5A/200 V - 240 VAC
9A/-20 V to -28 VDC
6A/-36 V to -72 VDC
Max output power/current
180 W/3.22A
180 W/3.22A @ -36 to -72 VDC Input
140 W/2.5 A @ -20 to -28 VDC Input
Surge Protection
4 KV (Surge level 4)
4 KV (Surge level 4)
Fans
0
0
Alcatel-Lucent OmniSwitch 6865
ALCATEL-LUCENT ENTERPRISE DATA SHEET
3
to provide extended PoE budgets. There
is no interruption of service when a new
power supply is installed or an existing
one replaced. The power supplies can be
installed directly at the back of the switch or
Product specifications and
measurements
Per-port LEDs
• Non-PoE ports - green: link/activity
• PoE ports - amber: link/activity
System LEDs
• OK: green/amber operational status of
the switch
• VC: green/amber master or slave role
in VC configuration. Number of blinks
between each solid color state indicates
chassis-id
• PS1: Green/Amber - status for the primary
power supply
• PS2: Green/Amber - status for the backup
power supply
Commercial EMI/EMC
• 47 CRF FCC Part 15: 2015 Subpart B
(Class A) VCCI (Class A, with UTP Cables)
• ICES–003:2012 Issue 5, Class A
• EN 61000-4-29
• IEC 60255-5
• IEEE 1613
Industry Specific Electric Power Substation
• AS/NZS 3548 (Class A) – C-Tick
• IEEE 1613, Section 4 to 8
• CE marking for European countries
(Class A)
• IEC 61850-3
• CE Emission
• EN 50121-4
Railway Applications
¬EN50581 (RoHS Recast)
• EN 62236-4
¬EN 55022 (EMI & EMC requirement)
• EN 61000-6-4
¬EN 55024 (Immunity Characteristics)
Intelligent Transportation (Road)
¬EN 61000-3-2 (Harmonic Current
emissions)
• NEMA TS-2
¬EN 61000-3-3
• DNV 2.4
¬EN 61000-4-2
• IEC 60945
¬EN 61000-4-3
Marine
¬EN 61000-4-4
Detailed product features
• Wire rate at layer 2 and layer 3 on all
ports
¬EN 61000-4-5 (Surge Immunity,
Class 4)
Simplified manageability and
configuration
• Virtual Fabric Link (VFL) ports raw
capacity: 42 Gb/s or 84 Gb/s aggregate
¬EN 61000-4-6
• Jumbo frame size: 9 216 bytes
(for 1/10 Gb/s)
¬EN 61000-4-11
Scalability numbers and speeds
¬EN 61000-4-8
• Total number of MAC addresses: 48,000
IEEE802.3: Hi-pot Test
(2.25 KV DC on all Ethernet Ports)
• Total number of IPv4 routes: 64,000
Industrial
• Number of VLANs: 4,000
Virtual Chassis
• Number of units in a VC: 2. Scalable up
to 8 in future.
• DAC cables for VC connection: 40 cm,
1m, 3m
Compliance and certifications
Commercial Safety
• UL 60950-1, 2nd Ed.
• IEC 60950-1; all national deviations
• EN 60950-1; all deviations
• CAN/CSA-C22.2 No. 60950-1-03
• NOM-019 SCFI, Mexico
• AS/NZ TS-001 and 60950:2000, Australia
• UL-AR, Argentina
• UL-GS Mark, Germany
• CU, EAC, Russia
• ANATEL, Brazil*
• CCC, China*
• KCC Korea*
• BSMI, Taiwan*
• EN 60825-1 Laser
• EN 60825-2 Laser
• CDRH Laser
• RoHS & WEEE directives compliant
* Contact for availability
Industrial Environmental
• IEC 60870-2-2 (operational temperature)
• IEC 60068-2-1 (temperature type test
– cold)
• IEC 60068-2-2 (temperature type test
– hot)
• IEC 60721-3-1: Class 1K5 (storage
temperature)
• IEC 60068-2-30: 5% to 95% noncondensing humidity
• IEC 60255-21-2 (mechanical shock)
• IEC 60255-21-1 (vibration)
Industrial Safety
• UL 508
• UL 61010
• EN 50021
• Hazardous Location
¬ISA 12.12.01 (UL 1604)
¬CSA22.2/213
•IP30
Industrial Emission
• EN 61805-3
• EN 55022 (Emission Standard)
• EN 61000-3-2
• EN 61000-3-3
• EN 55024 (Immunity Standard)
• EN 61000-4-2 to EN 61000-4-8
• EN 61000-4-11
• EN 61000-4-12
• EN 61000-4-16
• EN 61000-4-17
Alcatel-Lucent OmniSwitch 6865
ALCATEL-LUCENT ENTERPRISE DATA SHEET
4
• Zero-touch provisioning and network
automation. Out-of-the box plug-and-play
Auto-Fabric for automated discovery of
configuration server, topology & protocols
and automated switch configuration.
Works with any non-Alcatel-Lucent device
that supports Shortest Path Bridging-MAC,
SPBM), 802.1ak (MVRP), 802.3ad/802.1AX
(Link Aggregation Control Protocol, LACP)
• Intuitive CLI in a scriptable Python & BASH
environment via console, Telnet or Secure
Shell (SSH) v2 over IPv4/IPv6
• Powerful WebView Graphical Web
Interface via HTTP and HTTPS over
IPv4/IPv6
• Fully programmable RESTful web services
interface with XML and JSON support.
API enables access to CLI and individual
mib objects
• Supported by ProActive Lifecycle
Manager (PALM) which quickly and
easily generates an inventory list of
Alcatel-Lucent Enterprise Wi-Fi and LAN
switching products on your network,
provides status in terms of software
lifecycle, hardware lifecycle, warranty,
and support status. Current maintenance
release, recommended replacement for
EOL products, and latest release notes are
available as well through an easy-to–use
web interface
• Integrated with Alcatel-Lucent OmniVista®
products for network management
• Full configuration and reporting using
SNMPv1/2/3 to facilitate third-party
network management over IPv4/IPv6
• Integrated with Nokia 5620 Service Aware
Manager (SAM) ® application for network
management.
• File upload using USB, TFTP, FTP, SFTP or
SCP using IPv4/IPv6
• Human-readable ASCII-based configuration
files for off-line editing, bulk configuration
and out-of-the-box auto-provisioning
• Fully programmable OpenFlow 1.3.1 and
1.0 agent for control of native OpenFlow
and hybrid ports
• Non-volatile memory for start-up
configuration
• IEEE 802.1s Multiple Spanning Tree
Protocol (MSTP) encompasses IEEE 802.1D
Spanning Tree Protocol (STP) and IEEE
802.1w Rapid Spanning Tree Protocol
(RSTP)
• Per-VLAN spanning tree (PVST+) and 1x1
STP mode
• Multiple microcode image support with
fallback recovery
• IEEE 802.3ad/802.1AX Link Aggregation
Control Protocol (LACP) and static LAG
groups across modules
• Dynamic Host Configuration Protocol
(DHCP) relay for IPv4/IPv6
• Dual-home link support for sub-second
link protection without STP
• IEEE 802.1AB Link Layer Discover
Protocol (LLDP) with Media Endpoint
Discover (MED) extensions
• Virtual Router Redundancy Protocol
(VRRP) with tracking capabilities
• Network Time Protocol (NTP)
• Bidirectional Forwarding Detection (BFD)
for fast failure detection and reduced
re-convergence times in a IPv4/IPv6
routed environment
• DHCPv4 and DHCPv6 server managed
by Nokia VitalQIP® DNS/DHCP IP Address
Management
• IEEE protocol auto-discovery
• Dynamic PoE allocation delivers only
the power needed up to the total
power budget for most efficient power
consumption
• Redundant and hot-swappable power
supplies
• Configurable per-port PoE priority, max
power and time-of-day policy for PoE
power allocation
• Split Virtual Chassis protection: Autodetection and recovery of Virtual Chassis
splitting due to one or more VFL or stack
element failures
Monitoring and troubleshooting
• Local (on the flash) and remote server
logging (Syslog): event and command
logging
• Built-in CPU protection against malicious
attacks
Advanced security
Access control
• IP tools: ping and trace route
• Alcatel-Lucent Access Guardian framework
for comprehensive user-policy-based NAC
• Dying Gasp support via SNMP and
syslog messages
• Autosensing IEEE 802.1X multi-client,
multi-VLAN support
• Loopback IP address support for
management per service
• MAC-based authentication for non-IEEE
802.1X hosts
• Management virtual routing and
forwarding (VRF) support
• Web based authentication (captive portal):
a customizable web portal residing on the
switch
• Policy- and port-based mirroring
• Remote port mirroring
• sFlow v5 and Remote Monitoring (RMON)
• Unidirectional Link Detection (UDLD),
Digital Diagnostic Monitoring (DDM),
and Time Domain Reflectometry (TDR)
Resiliency and high availability
• Unified management, control and virtual
chassis technology
• Virtual Chassis 1+N redundant supervisor
manager
• Virtual Chassis In-Service Software
Upgrade (ISSU)
• Remote Virtual Chassis - Up to 10-km
fault-tolerant remote stacking supported
• Smart continuous switching technology
• ITU-T G.8032/Y1344 2010: Ethernet Ring
Protection
• User Network Profile (UNP) simplifies NAC
by dynamically providing pre-defined
policy configuration to authenticated
clients — VLAN, ACL, BW
• Secure Shell (SSH) with public key
infrastructure (PKI) support
• Terminal Access Controller Access-Control
System Plus (TACACS+) client
ALCATEL-LUCENT ENTERPRISE DATA SHEET
5
• IP Source Filtering as a protective and
effective mechanism against ARP attacks
• Bring Your Own Device (BYoD) provides
on-boarding of Guest, IT/non-IT issued and
silent devices. Restriction/Remediation of
traffic from non-compliant devices. Uses
RADIUS CoA to dynamically enforce User
Network Profiles based on Authentication,
Profiling, Posture check of devices.**
• Private VLAN
• LLDP Security mechanism for rogue device
detection and restriction
** with Aruba ClearPass
Network Control
• LGS CodeGuardian solution is available
on OmniSwitch® 6865, hardening it at
both the software source code and binary
executable levels to enhance overall
network security.
• CodeGuardian protects networks from
intrinsic vulnerabilities, code exploits,
embedded malware, and potential back
doors that could compromise missioncritical operations.
For additional information
on CodeGuardian visit
http://enterprise.alcatel-lucent.com
QoS
• Priority queues: Eight hardware-based
queues per port for flexible QoS
management
• Traffic prioritization: Flow-based QoS
Flow-based traffic policing and bandwidth
management
• 32-bit IPv4/128-bit IPv6 non-contiguous
mask classification
• Egress traffic shaping
• DiffServ architecture
• Congestion avoidance: Support for endto-end head-of-line (E2E-HOL) blocking
prevention, IEEE 802.1Qbb Priority-based
Flow Control (PFC) and IEEE 802.3x Flow
Control (FC)
Layer-3 routing and multicast
IPv4 routing
• Centralized Remote Access Dial-In
User Service (RADIUS) and Lightweight
Directory Access Protocol (LDAP)
administrator authentication
• Multiple VRF & inter-VRF route leaking
• Centralized RADIUS for device
authentication and network access control
authorization
• Open Shortest Path First (OSPF) v2 with
Graceful Restart
• Learned Port Security (LPS) or MAC
address lockdown
• Access Control Lists (ACLs); flow-based
filtering in hardware (Layer 1 to Layer 4)
• DHCP Snooping, DHCP IP and Address
Resolution Protocol (ARP) spoof protection
Alcatel-Lucent OmniSwitch 6865
• ARP poisoning detection
• Static routing
• Routing Information Protocol (RIP) v1
and v2
• Intermediate System to Intermediate
System (IS-IS) with Graceful Restart
• Border Gateway Protocol (BGP) v4 with
Graceful Restart
• Generic Routing Encapsulation (GRE) and
IP/IP tunneling
• Virtual Router Redundancy Protocol
(VRRPv2)
Advanced Layer-2 services
• Address Resolution Protocol (ARP)
• Ethernet services support using IEEE
802.1ad Provider Bridges (also known as
Q-in-Q or VLAN stacking)
• Policy-based routing and server load
balancing
• Fabric virtualization services IEEE 802.1aq
Shortest Path Bridging (SPB-M)
• DHCPv4 server
• Ethernet network-to-network interface
(NNI) and user network interface (UNI)
• DHCP relay (including generic UDP relay)
IPv6 routing
• Multiple VRF & Inter-vrf route leaking
• Internet Control Message Protocol
version 6 (ICMPv6)
• Static routing
• Routing Information Protocol Next
Generation (RIPng)
• Open Shortest Path First (OSPF) v3
with Graceful Restart
• Intermediate System to Intermediate
System (IS-IS) with Graceful Restart
• Multi-Topology IS-IS (M-ISIS)
• BGP v4 multiprotocol extensions for
IPv6 routing (MP-BGP)
• Graceful Restart extensions for OSPF
and BGP
• Service Access Point (SAP) profile
identification
• Service VLAN (SVLAN) and Customer VLAN
(CVLAN) support
• VLAN translation and mapping including
CVLAN to SVLAN
• Port mapping
ITU-T recommendations
• ITU-T G.8032/Y.1344 2010: Ethernet Ring
Protection (ERPv2)
IETF RFCs
IPv4
• RFC 2003 IP/IP Tunneling
• RFC 2131 Dynamic Host Configuration
Protocol (DHCPv4)
• RFC 2784 GRE Tunneling
• RFC 4022/2452 MIB for IPv4 TCP
• RFC 4087 IP Tunnel MIB
• RFC 4113/2454 MIB for IPv4 UDP
• RFC 4292/4293 IPv4 MIBs
OSPF
• DHCP Option 82: Configurable relay agent
information
• RFC 1765 OSPF Database Overflow
• Multiple VLAN Registration Protocol
(MVRP)
• RFC 2154 OSPF MD5 Signature
• HA-VLAN for Layer 2 clusters such as
MS-NLB and active-active Firewall clusters
• RFC 2740/5340 OSPFv3 for IPv6
• Jumbo frame support
• Bridge Protocol Data Unit (BPDU) blocking
• RFC 1850/2328 OSPF v2 and MIB
• RFC 2370/3630 OSPF Opaque LSA
• RFC 3101 OSPF NSSA Option
• RFC 3623 OSPF Graceful Restart
RIP
• Virtual Router Redundancy Protocol
version 3 (VRRPv3)
• STP Root Guard
• RFC 1058 RIP v1
• STP Loop-Guard
• Neighbor Discovery Protocol (NDP)
• Loopback Detection to auto-detect and
prevent L2 loops
• RFC 1722/1723/2453/1724 RIP v2
and MIB
• Policy-based routing and server load
balancing
• DHCPv6 server
• DHCPv6 Relay Agent
IPv4/IPv6 multicast
• RFC 1812/2644 IPv4 Router Requirements
Supported standards
• RFC 2080 RIPng for IPv6
IEEE standards
• RFC 1269/1657/4273 BGP v3 and v4 MIB
• IEEE 802.1D STP
BGP
• RFC 1403/1745 BGP/OSPF Interaction
• Internet Group Management Protocol
(IGMP) v1/v2/v3 snooping
• IEEE 802.1p CoS
• IEEE 802.1Q VLANs
• RFC 1771-1774/2842/2918/3392/4271
BGP v4
• Protocol Independent Multicast – SparseMode (PIM-SM), Source Specific Multicast
(PIM-SSM)
• IEEE 802.1ab (LLDP)
• RFC 1965 BGP AS Confederations
• IEEE 802.1ag (OA&M)
• RFC 1966 BGP Route Reflection
• IEEE 802.1ad Provider Bridges Q-in-Q/
VLAN stacking
• RFC 1997/1998/4360 BGP
• IEEE 802.1ak (Multiple VLAN Registration
Protocol (MVRP)
• RFC 2042/5396 BGP New Attribute
• Protocol Independent Multicast – DenseMode (PIM-DM), Bidirectional Protocol
Independent Multicast (PIM-BiDir)
• Distance Vector Multicast Routing Protocol
(DVMRP)
• Multicast Listener Discovery (MLD) v1/v2
snooping
• IEEE 802.1aq Shortest Path Bridging (SPB)
• IEEE 802.1s MSTP
• IEEE 802.3i 10BASE-T
• IEEE 802.1w RSTP
Communities Attribute
• RFC 2385 BGP MD5 Signature
• RFC 2439 BGP Route Flap Damping
• RFC 2545 BGP-4 Multiprotocol Extensions
for IPv6 Routing
• IEEE 802.3x Flow Control
• RFC 2858/4760 Multiprotocol Extensions
for BGP-4
• IEEE 802.3z Gigabit Ethernet
• RFC 3065 BGP AS Confederations
• IEEE 802.3ab 1000Base-T
• RFC 4456 BGP Route Reflection
• IEEE 802.3ac VLAN Tagging
• Provides real-time conversation quality
information contained in the SIP packets
concerning packet loss, delay, jitter, MOS
score, R-Factor in real time*
• IEEE 802.3ad/802.1AX Link Aggregation
• RFC 4486 Subcodes for BGP Cease
Notification
• IEEE 802.3ae 10 GigE
• RFC 4724 Graceful Restart for BGP
• IEEE 802.3af Power over Ethernet
• IEEE 802.3at PoE Plus
• RFC 3392/5492/5668/6793 BGP 4-Octet
ASN
• SIP profile for QOS, priority tuning for
end-to-end processing*
• IEEE 802.3az Energy Efficient Ethernet (EEE)
• RFC 5082 Generalized TTL Security
• PIM to DVMRP gateway support
Fluent network for voice, video and
data
• Session Initiation Protocol (SIP) detection,
session monitoring and tracking*
• Multicast DNS Relay: Bonjour protocol
support for wired Airgroup
* Early availability feature
Alcatel-Lucent OmniSwitch 6865
ALCATEL-LUCENT ENTERPRISE DATA SHEET
6
Mechanism (GTSM)
IS-IS
• RFC 1142/1195/3719/3787/5308 IS-IS v4
• RFC 4291/3513/2373 Addressing
Architecture (uni/any/multicast)
Security
• RFC 1321 MD5
• RFC 2763/2966/3567/3373 Adjacencies
and route management
• RFC 4292/4293 IPv6 MIBs
• RFC 4301/2401 Security Architecture
• RFC 1826/1827/4303/4305 Encapsulating
Payload (ESP) and crypto algorithms
• RFC 5120 M-ISIS: Multi Topology IS-IS
• RFC 4302/2402 IP Authentication Header
• RFC 2104 HMAC Message Authentication
• RFC 5306 Graceful Restart
• RFC 4303/2406 IP Encapsulating Security
Payload (ESP)
• RFC 2138/2865/2868/3575/2618 RADIUS
Authentication and Client MIB
• RFC 4308 Cryptographic Suites for IPSec
• RFC 4443/2463 ICMPv6
• RFC 2139/2866/2867/2620 RADIUS
Accounting and Client MIB
• RFC 4861/2461 Neighbor Discovery
• RFC 2228 FTP Security Extensions
• RFC 4862/2462 Stateless Address
Autoconfiguration
• RFC 2284 PPP EAP
• RFC 5095 Deprecation of Type 0 Routing
Headers in IPv6
• RFC 4301 Security Architecture for IP
• RFC 5309/draft-ietf-isis-igp-p2p-over-lan
Point to point over LAN
• RFC 6329 IS-IS Extensions Supporting IEEE
802.1aq SPB
IP Multicast
• RFC 1075/draft-ietf-idmr-dvmrp-v3-11.
txt DVMRP
• RFC 2362/4601/5059 PIM-SM
• RFC 2365 Multicast
Manageability
• RFC 2869/2869bis RADIUS Extension
• RFC 5517 Private VLAN
QoS
• RFC 2710/3019/3810/MLD v2 for IPv6
• RFC 854/855 Telnet and Telnet options
• RFC 896 Congestion Control
• RFC 2715 PIM and DVMRP interoperability
• RFC 959/2640 FTP
• RFC 1122 Internet Hosts
• RFC 2933 IGMP MIB
• RFC 1350 TFTP Protocol
• RFC 3376 IGMPv3 (includes IGMP v2/v1)
• RFC 1155/2578-2580 SMI v1 and SMI v2
• RFC 2474/2475/2597/3168/3246
DiffServ
• RFC 3569 Source-Specific Multicast (SSM)
• RFC 1157/2271 SNMP
• RFC 2697 srTCM
• RFC 3973 Protocol Independent MulticastDense Mode (PIM-DM)
• RFC 1212/2737 MIB and MIB-II
• RFC 2698 trTCM
• RFC 1213/2011-2013 SNMP v2 MIB
• RFC 3635 Pause Control
• RFC 4541 Considerations for IGMP and
MLD Snooping Switches
• RFC 1215 Convention for SNMP Traps
Others
• RFC 5015 BiDIR PIM
• RFC 1573/2233/2863 Private Interface
MIB
• RFC 791/894/1024/1349 IP and IP
Ethernet
• RFC 5060 Protocol Independent Multicast
MIB
• RFC 1643/2665 Ethernet MIB
• RFC 792 ICMP
• RFC 768 UDP
• RFC 5132 Multicast Routing MIB
• RFC 1867 Form-based File Upload in
HTML
• RFC 5240 PIM Bootstrap Router MIB
• RFC 1901-1908/3416-3418 SNMP v2c
• RFC 826 ARP
• RFC 2096 IP MIB
• RFC 919/922 Broadcasting Internet
Datagram
IPv6
• RFC 1981 Path MTU Discovery
• RFC 2460 IPv6 Specification
• RFC 2131 DHCP Server/Client
• RFC 793/1156 TCP/IP and MIB
• RFC 2388 Returning Values from Forms:
multipart/form-data
• RFC 925/1027 Multi-LAN ARP/Proxy ARP
• RFC 2396 Uniform Resource Identifiers
(URI): Generic Syntax
• RFC 951 BOOTP
• RFC 2466 MIB for IPv6: ICMPv6 Group
• RFC 2570-2576/3410-3415/3584
SNMP v3
• RFC 1191 Path MTU Discovery
• RFC 2711 Router Alert Option
• RFC 2616 /2854 HTTP and HTML
• RFC 3056 6to4 Tunnels
• RFC 2667 IP Tunneling MIB
• RFC 1305/2030 NTP v3 and Simple NTP
• RFC 3315 Dynamic Host Configuration
Protocol for IPv6 (DHCPv6)
• RFC 2668/3636 IEEE 802.3 MAU MIB
• RFC 3484 Default Address Selection
• RFC 3023 XML Media Types
• RFC 3493/2553 Basic Socket API
• RFC 3414 User-based Security Model
• RFC 3542/2292 Advanced Sockets API
• RFC 3826 (AES) Cipher Algorithm in the
SNMP User-based Security Model
• RFC 2461 NDP
• RFC 2464 IPv6 over Ethernet
• RFC 2465 MIB for IPv6: Textual
Conventions (TC) and General Group
• RFC 3587/2374 Global Unicast Address
Format
• RFC 3595 TC for IPv6 Flow Label
• RFC 3596/1886 DNS for IPv6
• RFC 4007 Scoped Address
• RFC 4022/2452 MIB for IPv6 TCP
• RFC 4087 IP Tunnel MIB
• RFC 4113/2454 MIB for IPv6 UDP
• RFC 4193 Unique Local Addresses
• RFC 4213/2893 Transition Mechanisms
• RFC 2674 VLAN MIB
• RFC 4122 A Universally Unique IDentifier
(UUID) URN Namespace
• RFC 4234 Augmented BNF for Syntax
Specifications: ABNF
• RFC 4251 Secure Shell Protocol
Architecture
• RFC 4252 The Secure Shell (SSH)
Authentication Protocol
• RFC 4627 JavaScript Object Notation
(JSON)
• RFC 6585 Additional HTTP Status Codes
Alcatel-Lucent OmniSwitch 6865
ALCATEL-LUCENT ENTERPRISE DATA SHEET
7
• RFC 950 Subnetting
• RFC 1151 RDP
• RFC 1256 ICMP Router Discovery
• RFC 1493 Bridge MIB
• RFC 1518/1519 CIDR
• RFC 1541/1542/2131/3396/3442 DHCP
• RFC 1757/2819 RMON and MIB
• RFC 2131/3046 DHCP/BootP Relay
• RFC 2132 DHCP Options
• RFC 2251 LDAP v3
• RFC 2338/3768/2787 VRRP and MIB
• RFC 3021 Using 31-bit Prefixes
• RFC 3060 Policy Core
• RFC 3176 sFlow
• RGC 3621 Power Ethernet MIB
Software Defined Networking (SDN)
• OpenFlow Switch Specification v1.3.1
• OpenFlow Switch Specification v1.0.0
Ordering information
PART NUMBER
DESCRIPTION
OmniSwitch 6865 models
OS6865-P16X
OS6865-P16X: Hardened Gigabit Ethernet L3 fixed configuration fan-less chassis with 12 RJ-45 10/100/1000
Base-T PoE+ ports out of which 4 are 75W HPoE ports, two 1000 Base-X SFP ports, two SFP+ (1G/10G) ports,
RS-232 Console (RJ45) and USB port. The bundle includes the chassis pre-installed with fully featured AOS software
& advanced IP routing SW (IPv4/IPv6), one AC power supply, country-specific power cord, user manuals access card,
power supply tray and hardware for mounting in a 19” rack
OS6865-P16XD
OS6865-P16XD: Hardened Gigabit Ethernet L3 fixed configuration fan-less chassis with 12 RJ-45 10/100/1000
Base-T PoE+ ports out of which 4 are 75W HPoE ports, 2 1000 Base-X SFP ports, 2 SFP+ (1G/10G) ports, RS-232
Console (RJ45) and USB port. The bundle includes the chassis pre-installed with fully featured AOS software &
advanced IP routing SW (IPv4/IPv6), one DC power supply, user manuals access card, power tray and hardware for
mounting in a 19” rack
OS6865-U12X
OS6865-U12X: Hardened Gigabit Ethernet L3 fixed configuration fan-less chassis with four 100/1000 Base-X SFP
ports, two 1000 Base-X SFP Ports, four 10/100/1000 Base-T 75W HPoE ports, two SFP+ (1G/10G) ports, RS-232
Console (RJ45) and USB port. The bundle includes the chassis pre-installed with fully featured AOS software &
advanced IP routing SW (IPv4/IPv6), one AC power supply, country-specific power cord, user manuals access card,
power tray and hardware for mounting in a 19” rack.
OS6865-U12XD
OS6865-U12XD: Hardened Gigabit Ethernet L3 fixed configuration fan-less chassis with four 100/1000 Base-X SFP
ports, two 1000 Base-X SFP ports, four 10/100/1000 Base-T 75W HPoE ports, two SFP+ (1G/10G) ports, RS-232
Console (RJ45) and USB port. The bundle includes the chassis pre-installed with fully featured AOS software &
advanced IP routing SW (IPv4/IPv6), one DC power supply, user manuals access card, power tray and hardware for
mounting in a 19” rack.
OS6865-U28X
OS6865-U28X: Hardened Gigabit Ethernet L3 fixed configuration fan-less chassis in a 1U form factor with 20
100/1000 Base-X SFP ports, four SFP+ (1G/10G) ports, four 10/100/1000 Base-T 75W HPoE ports, RS-232 Console
(RJ45), USB, and two 20G VFL/stacking ports. The bundle includes the chassis pre-installed with fully featured AOS
software & advanced IP routing SW (IPv4/IPv6), one AC power supply, country-specific power cord, user manuals
access card, power tray and hardware for mounting in a 19” rack.
OS6865-U28XD
OS6865-U28XD: Hardened Gigabit Ethernet L3 fixed configuration fan-less chassis in a 1U form factor with 20
100/1000 Base-X SFP ports, four SFP+ (1G/10G) ports, four 10/100/1000 Base-T 75W HPoE ports, RS-232 Console
(RJ45), USB, and two 20G VFL/stacking ports. The bundle includes the chassis pre-installed with fully featured AOS
software & advanced IP routing SW (IPv4/IPv6), one DC power supply, user manuals access card, power tray and
hardware for mounting in a 19” rack.
OmniSwitch 6865 power supplies
OS6865-BP
OS6865-BP modular AC backup power supply. Provides system & PoE power to one OS6865 switch. Ships with
country specific power cord
OS6865-BP-D
OS6865-BP modular DC backup power supply. Provides system & PoE power to one OS6865 switch
OmniSwitch 6865 accessories
OS6865-CBL-40
OS6865 20 Gigabit direct attached copper cable (40 cm, QSFP+) for Virtual Chassis connections, for OS6865-U28X
OS6865-CBL-100
OS6865 20 Gigabit direct attached copper cable (1m, QSFP+) for Virtual Chassis connections, for OS6865-U28X
OS6865-CBL-300
OS6865 20 Gigabit direct attached copper cable (3m, QSFP+) for Virtual Chassis connections
OS6865-TRAY-1U
Spare Power Supply tray kit with 1RU brackets for mounting two PS trays side-by-side in a 19” rack for
OS6865-U28X
OmniSwitch 6865 transceivers
iSFP-100-MM
100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over multimode
fiber.
iSFP-100-SM15
100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over single-mode
fiber up to 15 km
iSFP-GIG-T
1000Base-T industrial Gigabit Ethernet Transceiver (SFP MSA). SFP works at 1000 Mb/s speed and full-duplex mode
iSFP-GIG-SX
1000Base-SX industrial Gigabit Ethernet industrial optical transceiver (SFP MSA)
iSFP-GIG-LX
1000Base-LX industrial Gigabit Ethernet optical transceiver (SFP MSA)
iSFP-GIG-LH40
1000Base-LH industrial Gigabit Ethernet optical transceiver (SFP MSA). Typical reach of 40 km on 9/125 µm SMF
iSFP-GIG-LH70
1000Base-LH industrial Gigabit Ethernet optical transceiver (SFP MSA). Typical reach of 70 km on 9/125 µm SMF
Alcatel-Lucent OmniSwitch 6865
ALCATEL-LUCENT ENTERPRISE DATA SHEET
8
PART NUMBER
DESCRIPTION
10G transceivers
iSFP-10G-LR
10 Gigabit industrial optical transceiver (SFP+). Supports monomode fiber over 1310 nm wavelength (nominal) with
an LC connector. Typical reach of 10 km
iSFP-10G-ER
10 Gigabit industrial optical transceiver (SFP+). Supports monomode fiber over 1550 nm wavelength (nominal) with
an LC connector. Typical reach of 40 km
SFP+ direct attached cables
iSFP-10G-C1M
10 Gigabit industrial direct attached copper cable (1 m, SFP+)
iSFP-10G-C3M
10 Gigabit industrial direct attached copper cable (3 m, SFP+)
iSFP-10G-C7M
10 Gigabit industrial direct attached copper cable (7 m, SFP+)
Warranty
The OmniSwitch 6865 family comes with a Limited Lifetime Warranty.
Services and support
For more information about our Professional services, Support services, and Managed services, please go to
http://enterprise.alcatel-lucent.com/?services=EnterpriseServices&page=directory.
enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other
trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the
property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its
affiliates assumes any responsibility for inaccuracies contained herein. (May 2017)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising